Mikroskopie für Profis, Fortgeschrittene und Einsteiger

SZM-3 Stereomikroskop Binokular mit Säulenstativ

SZM-4 Stereomikroskop Trinokular mit Säulenstativ

SZM-LED1 Stereomikroskop Binokular mit Säulenstativ, LED-Beleuchtung

SZM-LED2 Stereomikroskop Trinokular mit Säulenstativ, LED-Beleuchtung

Take advantage of reliable Canon EF/EF-S compatibility, a robust metal T2 interface and straightforward integration for stable imaging workflows; order the device directly via Metav Werkzeuge or consult our specialists for application advice. T2 camera adapter AE.5040 — Euromex T2‑mount for Canon EOS SLR (EF/EF‑S) The T2 camera adapter AE.5040 provides a precision T2 interface to attach Canon EOS SLR cameras with EF/EF‑S mounts to microscopes and optical stands for stable imaging and documentation. Reliable Canon EF/EF‑S compatibility Solid metal T2 ring for secure fitting Compatible with accessory AE.5130 Precision interface for consistent imaging results The adapter supplies a defined T2 interface that preserves optical alignment when attaching cameras to optical instruments, ensuring repeatable imaging and minimised mechanical play. Constructed for stable coupling with Canon EF/EF‑S mounts, the connection reduces light leaks and lateral shift that can affect measurements. For laboratory and inspection environments, the adapter supports consistent image capture, which helps maintain traceability and comparability across inspection runs. Fast, repeatable installation to improve throughput Designed for mechanical simplicity, the T2 ring allows quick mounting and removal while maintaining the same optical axis after each change. The result is reduced setup time and fewer alignment cycles in routine workflows, translating into higher operational efficiency. The compact construction and robust materials offer tactile feedback at assembly, which enhances confidence during repeated use and contributes to smoother daily operations. Seamless system integration and dependable availability Compatibility with optical peripherals is documented and the adapter is suitable for retrofit into many existing systems commonly used in workshops and labs. The combination of a standardised interface and sturdy design minimises downtime caused by adapter wear or misfit. For tailored advice or specifications beyond the core data, technical documentation and consultation are available from Metav Werkzeuge, ensuring a reliable supply channel and expert assistance for integration into measurement setups. For purchasing guidance or application support for this Euromex T2 camera adapter, contact Metav Werkzeuge for expert consultation and order facilitation via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical Data Article number: AE.5040 Label: T2‑Ring für Canon‑EOS‑SLR‑Digitalkameras Product type: T2 camera adapter Brand: Euromex Camera mount: Canon EOS SLR, EF/EF‑S Compatible article: AE.5130 UID: AE.5040 Facts No numeric specifications provided Special features T2 interface for optical mounting Compatible with Canon EF/EF‑S mounts Robust metal construction for stable coupling Intended for microscope and optical‑stand attachment FAQ Is the adapter suitable for Canon RF mirrorless cameras? No. The AE.5040 is designed for Canon EOS SLR cameras with EF/EF‑S mounts and is not compatible with Canon RF mirrorless mounts without additional adapters. Can the adapter be used with trinocular microscope tubes? Yes. The adapter provides a standard T2 interface intended for attachment to microscope trinocular ports and similar optical stands, enabling camera mounting for documentation. Does the adapter affect optical focus or magnification? The adapter offers a mechanical interface only; focus and magnification depend on the optical configuration. The AE.5040 preserves alignment to prevent unintended optical shifts during installation. Is the AE.5130 accessory required for operation? The AE.5130 is listed as a compatible accessory and may offer additional mounting options; it is not mandatory but can extend integration possibilities with specific setups. Who supplies technical documentation for the adapter? Technical documentation and further application details are available through Metav Werkzeuge, which can advise on integration and compatibility for inspection and imaging systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the precise mechanical interface and Nikon D‑SLR compatibility to integrate digital cameras with standard T2 optics; the compact design keeps installation straightforward while preserving optical alignment. Order the adapter via Metav Werkzeuge or consult our specialists for application advice. AE.5025 — Euromex T2 camera adapter for Nikon D‑SLR AE.5025 is a compact T2 camera adapter designed to link Nikon D‑SLR bodies to instruments and optics that use a T2 thread interface, enabling stable photographic capture from microscopes and other optical systems. Euromex AE.5025 T2 camera adapter Fits Nikon D SLR camera mount T2 mount interface for optical instruments Reliable connection for imaging chains and instruments The T2 camera adapter provides a straightforward mechanical link between a Nikon D‑SLR and any device equipped with a standard T2 mount. By converting the camera’s bayonet to the established threaded interface, the adapter permits the attachment of photographic bodies to microscopes, telescopes and other optical instruments without altering the instrument’s objective or eyepiece. This mechanical interface maintains a fixed distance and alignment between the optical axis and the sensor, which is essential for consistent image reproduction. The design focuses on delivering a secure mechanical fit and preserving flange focal relationships so that focus and field of view remain predictable when cameras are interchanged or moved between setups. Practical benefits for laboratories and workshops Integrating a Nikon D‑SLR via a T2 adapter simplifies documentation and measurement workflows in laboratories, quality control and educational settings. The adapter helps to reduce setup time by providing a repeatable mounting solution that requires no additional optics or complex adjustments; this supports efficient image capture during routine inspections or documentation runs. The mechanical coupling is also advantageous when series documentation is required, as the camera maintains its position relative to the instrument, producing consistent frames for comparison. Compatibility with related items such as AE.5130 makes the adapter a flexible element within a broader imaging toolkit, enabling modular upgrades and accessory choices while keeping the optical path intact. Installation overview and typical applications Mounting the adapter involves fitting the T2 ring to the instrument’s T2 thread and securing the Nikon bayonet to the other end; the result is a direct, rigid connection that supports both stills and video capture. Typical applications include photomicrography, routine documentation of components, educational demonstrations and basic astrophotography when T2-ready optics are used. The adapter’s simplicity makes it suitable for technicians and educators who require dependable imaging without elaborate calibration. If additional optical correction or spacing is necessary for specific objectives, compatible extension tubes or photography-specific optics can be combined with the adapter to achieve the desired magnification and focus range. For reliable camera-to-optic integration, request the Euromex AE.5025 from Metav Werkzeuge or contact Metav Werkzeuge’s consultants in Emmerich for tailored advice and compatibility guidance Technical data Article number: AE.5025 Label: T2 ring for Nikon D‑SLR digital cameras Product type: T2 camera adapter Brand: Euromex Camera mount: Nikon D SLR Compatible article: AE.5130 UID: AE.5025 Core data No numerical specifications provided Special features T2 thread interface for attachment to optical instruments Direct Nikon D‑SLR bayonet compatibility Suitable for photomicrography and documentation workflows Cross-sell reference: AE.5130 FAQ What does the AE.5025 adapter do? The AE.5025 converts a Nikon D‑SLR bayonet to a standard T2 threaded interface, enabling secure attachment of a DSLR to microscopes and other T2‑equipped optics. Can the adapter be used with all Nikon D‑SLR models? The adapter is designed for Nikon D‑SLR bayonet mounting; compatibility with specific camera models follows the standard Nikon F‑mount mechanical fit. Is additional equipment required for photomicrography? In many cases the adapter alone provides a direct connection; specialised optical correction or spacing accessories may be added for certain objectives or magnification requirements. Does the AE.5025 work with microscope cameras? Yes, the adapter links conventional Nikon D‑SLR cameras to microscopes and other instruments that accept a T2 thread, offering a simple option for photographic documentation. Which accessory pairs well with this adapter? Related items such as AE.5130 are listed as compatible and can be combined depending on the imaging setup and required spacing. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the compact size, three-step optical magnification and Swiss engineering to streamline visual inspection tasks in the workshop; order the device directly via Metav Werkzeuge or consult the Metav team for product matching and availability. TechMag mini — compact magnifying device with 7×, 12× and 19× optics by SCHWEIZER The TechMag mini is a compact magnifying device designed for precise close-up inspection in assembly, quality control and fine mechanical work, offering three selectable magnifications for flexible visual evaluation. Compact inspection magnifier with three settings 7×, 12× and 19× optical magnification Swiss-made precision optics Portable design for workshop inspection Faster defect detection with three defined magnifications The combination of 7×, 12× and 19× magnification enables targeted inspection at different scales without changing instruments. With distinct optical steps, visual checks of solder joints, component alignment or fine mechanical parts become more efficient, reducing inspection time and the likelihood of oversight. The device’s precision optics ensure that details are reproduced clearly, supporting reliable decision-making during incoming inspection or final quality checks. This rational setup helps to accelerate workflows while maintaining consistent inspection standards. Compact format that supports versatile workshop use A compact, portable magnifier is valuable where bench space is at a premium and inspections must be performed at multiple stations. The small footprint of this optical device allows easy repositioning and immediate use at the workplace, so handling and throughput remain uninterrupted. The emphasis on portability and simple handling fosters smoother processes on the shop floor and supports leaner inspection routines without sacrificing performance. Clear visual results and dependable build quality The Swiss origin of the optical assembly signals an emphasis on optical clarity and consistent manufacturing standards. For tasks requiring careful visual assessment, such as electronics repair or component verification, the magnifier provides a clear, stable image that reduces eye strain and improves accuracy. The straightforward feature set—three defined magnifications—keeps operation intuitive and minimises time spent on equipment setup, contributing to measurable gains in inspection efficiency. Contact Metav Werkzeuge for personalised advice on the SCHWEIZER TechMag mini and to arrange fast delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000851767NW Type: TechMag mini Product: Vergrößerungsgerät / Magnifying device Brand: SCHWEIZER Facts Magnifications: 7×, 12×, 19× Packaging unit: 1 UID: 4000851767NW Special features Three magnification settings (7× / 12× / 19×) Compact, portable design Swiss production specified on the label FAQ What magnification steps are available? The device offers 7×, 12× and 19× magnifications as stated on the SCHWEIZER TechMag mini (SKU 4000851767NW), allowing selection of the most suitable scale for different inspection tasks. Is this magnifier suitable for electronics and small-part inspection? Yes; the TechMag mini’s selectable optical steps are suitable for close visual inspection of small components, solder joints and other fine-detail work where precise visual assessment is required. How is the device best used on the workshop bench? Its compact and portable format makes the magnifier convenient for bench-top checks and mobile inspections across workstations, supporting flexible inspection routines without fixed installation. Does the TechMag mini require complex setup? No; the unit’s straightforward design focuses on quick, reliable visual inspection via three defined magnification levels, keeping operation simple and efficient. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Stereo Mikroskop for precise measurements in the range 0mm to 0mm. The so-called monobloc, which is the vernier, is made from one piece. External, internal, depth and step measurements can be carried out with calip Stereo Mikroskop.Available in the following versions:| Article number | | | | ||Summary and technical data for on Metav IndustryLine caliper Stereo MikroskopManufacturer: Metav IndustryLineModel: Stereo MikroskopRange: 0mm - 0mmAccuracy:SpindleWorking distance: 105Working surface: ⌀ 95Collet: 76Throat depth: 140 mmSpecial features: Speziell entwickelt für anspruchvolle Anwendung in Ausbildung, Labor und IndustrieAdjustment of dioptres: ±6Adjustable ocular distance: 52-76mmSetting standard:Focal area: 50Base: 292x283Power: 6V/10W+220V/5WLight: regelbares halogen Auflicht und Durchlicht Fluoreszenz LampeTempered lensMikroscope head: 45⁰ Schrägeinblick, um 360⁰ drehbarColumn: Ø25x240 mmAccessories included: Mit Okular SWH10Order now Stereo Mikroskop Online.

Take advantage of the single‑arm universal design and NexiusZoom compatibility for flexible, space‑saving microscopy setups; the stand is supplied without a head holder to allow tailored head selection. Order this mounting solution via Metav Werkzeuge or consult our advisors for matching NexiusZoom heads and accessories. NZ.9020 — Single‑arm universal microscope stand by Euromex, NexiusZoom compatible The NZ.9020 is a single‑arm universal microscope stand for stable, adaptable mounting in laboratories and workshops, designed for use with NexiusZoom microscope heads and delivered without an integrated illumination system. Single‑arm universal design Compatible with NexiusZoom series Supplied without NexiusZoom head holder No integrated illumination Stable, modular support that adapts to inspection workflows The single‑arm construction delivers a compact footprint while preserving lateral reach and stability for routine inspection and documentation tasks. As a microscope stand, it separates the mechanical support from the optical head, enabling straightforward upgrades or head swaps without replacing the entire assembly. The absence of integrated illumination reduces clutter and allows selection of illumination solutions matched to the imaging task, so the stand serves both benchtop and mobile setups with a focus on repeatable positioning and long‑term durability. Simple integration with NexiusZoom heads to reduce equipment downtime Designed specifically for compatibility with the NexiusZoom series, the stand provides a clear mechanical interface for rapid installation of zoom heads and cameras. This modular approach shortens setup and maintenance time by allowing teams to keep spare heads or camera adapters on hand and change configurations quickly. The compatibility focus supports efficient workflows in quality control and education, where different optical heads may be required for varying sample types, without the need for additional mounting adaptors. Workshop‑grade design for reliable everyday use Constructed for professional environments, the support prioritises robust mechanics and ease of alignment so that repeat measurements and inspections remain consistent over time. The option to select dedicated illumination or camera modules means the stand contributes to an economical, long‑term equipment strategy: initial investment is limited to the base support while functionality is expanded as needs evolve. This approach aligns with the principle of delivering precision tools that scale with the workshop’s requirements. For reliable mounting and flexible integration with NexiusZoom heads, contact Metav Werkzeuge to discuss the NZ.9020 by Euromex and compatible accessories — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: NZ.9020 Label: Single‑arm universal stand without NexiusZoom head holder Manufacturer: Euromex Product type: Microscope stand (single‑arm universal) Facts Compatible series: NexiusZoom Illumination: none Supplied scope: stand without NexiusZoom head holder Cross‑selling SKUs: NZ.9090; NZ.9095 Special features Single‑arm universal design Modular head compatibility No integrated illumination for custom lighting selection Intended for laboratory and workshop use FAQ What microscope heads fit this stand? The NZ.9020 is designed for compatibility with the NexiusZoom series; Euromex zoom heads and adapters for the NexiusZoom range mate directly with the stand’s interface. Is illumination included with the stand? No — the stand is supplied without illumination, allowing selection of external lighting tailored to the sample and imaging method. Can the stand be used in production inspection? Yes. The single‑arm, modular construction supports routine inspection tasks and quick head changes, making the stand suitable for production and quality control environments. Does the NZ.9020 include the head holder? The delivery scope specifies a stand without NexiusZoom head holder, so the head holder or zoom head must be ordered separately when required. Are there recommended accessories for camera mounting? Euromex NexiusZoom camera adapters and mounting accessories are recommended to integrate cameras with the NZ.9020 and complete an imaging workstation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the stable dual-arm design, the secure table-clamp mounting and the proven compatibility with NexiusZoom components for fast, reliable setup in any bench environment; order the stand directly via Metav Werkzeuge or consult the on-site specialists for configuration and delivery. Universal two-arm stand with table clamp (NZ.9032) — Euromex microscope stand with NexiusZoom compatibility Universal two-arm stand with table clamp (NZ.9032) provides a robust support solution for a wide range of stereomicroscopes and inspection heads, combining a flexible arm system with clamp mounting for workshop or laboratory benches Dual-arm design for flexible positioning Secure table-clamp mounting without drilling Compatible with NexiusZoom series Supplied without NexiusZoom head holder Faster setup and repeatable positioning for routine inspection The dual-arm design of this bench stand delivers smooth, controlled movement and a wide working envelope, enabling rapid repositioning of optical heads and cameras. Built for repetitive inspection tasks, the support arm minimises downtime during component checks and quality control cycles by offering stable mounting and predictable reach. The design reduces the need for frequent adjustments, improving throughput in serial inspection and assembly work. Bench mounting that preserves the work surface Fitted with a robust table clamp, the stand secures to the bench without permanent fixtures, avoiding the need for drilling or dedicated mounting points. This method of attachment provides a firm hold while maintaining bench flexibility — an advantage for multi-use workspaces or rented labs. The clamp solution supports clean lab practice and simplifies relocation when workflows change. Modular compatibility for adaptable optical setups Designed for integration with the NexiusZoom series, the stand allows the use of different microscope heads and zoom modules to match measurement and inspection requirements. The modular approach means one support can be repurposed for varied tasks, from coarse visual inspection to detailed stereomicroscopy, reducing the number of different stands required and streamlining tool inventory. Practical choice for lab managers and workshop planners The compact footprint and flexible articulation make this support suitable for confined benches and crowded workstations, where space efficiency and accessibility matter. By combining a microscope stand with clamp mounting and industry-standard compatibility, the product supports a pragmatic purchasing decision: fewer specialised units, easier stock management and consistent ergonomics across inspection stations. Speak to Metav Werkzeuge to specify the NexiusZoom configuration for this Euromex stand and secure reliable supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: NZ.9032 Product: Microscope stand Brand: Euromex Stand type: Double-arm stand with table clamp Facts SKU / UID: NZ.9032 Compatible series: NexiusZoom Scope of delivery: Stand without NexiusZoom head holder Special features Double-arm articulation for extended reach Table-clamp mounting for non-permanent attachment Supplied without NexiusZoom holder for modular integration FAQ Is this stand compatible with NexiusZoom microscope heads? The stand is compatible with the NexiusZoom series and allows mounting of heads designed for that system when the appropriate holder is used with the Euromex support. Does the table clamp require permanent bench modification? No, the table-clamp mounting secures the stand without drilling and preserves the bench surface while providing firm attachment for inspection tasks. Is the NexiusZoom head included with the stand? The delivery for NZ.9032 comprises the stand only; the NexiusZoom head holder is not included and must be ordered separately if required. For which work environments is this stand intended? This dual-arm bench support is intended for workshops and laboratories requiring adaptable microscope positioning, stable mounting and quick reconfiguration for inspection or assembly work. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Weiß/Schwarzer Objekttisch, Typ 2, 95mm Durchmesser

Zoom-Stereo-Mikroskop ZTX das sagt die Redaktion hallo, ich bin die redaktion

Robust metal frame construction combined with a Ø100 mm lens and comfortable 2× magnification makes this handheld inspection tool ideal for repetitive visual checks and detailed assembly tasks. Lightweight handling reduces fatigue during extended use. Order the hand magnifier directly via Metav Werkzeuge or consult our specialists for application guidance. Hand magnifier, 100 mm, 2× (M503.133) — handheld inspection lens by Metav IndustryLine The Hand magnifier, 100 mm, 2× is a portable inspection aid designed for visual quality control in workshop, laboratory and hobby environments, providing a wide field of view for jewellery, electronics and print inspection. Large Ø100 mm field of view 2× magnification, 2 dioptres Durable metal frame Weighs only 150 g for handheld use Efficient inspection with a wide visual field The large Ø100 mm lens delivers a noticeably wider viewing area than small loupe heads, which reduces the need to reposition the object during inspection and speeds up repetitive tasks. With 2× magnification (2 dioptres) the viewer benefits from enlarged detail without significant loss of depth of field, making the tool suitable for visual quality control, label or print checks and coarse solder-joint inspection. The optical properties prioritise a practical balance between enlargement and usability so that routine checks remain efficient and reproducible. Durable build for day-to-day workshop work A metal frame gives the magnifier structural stability and resistance to workshop wear, while the low overall mass (approximately 150 g) keeps the unit easy to hold for longer periods. The construction reduces flex in the holding assembly, which contributes to a steadier image and fewer re-takes during quality checks. This robustness supports frequent handling across production, service and inspection environments and is engineered to minimise downtime related to tool replacement. Versatile applications and straightforward handling The device suits a range of tasks from component inspection on PCBs to jewellery appraisal and hobbyist model work. The combination of a wide lens and moderate magnification enables comfortable working distance and faster orientation on the workpiece, which is particularly useful when scanning larger areas for defects. The optical specification is clear: Ø100 mm for coverage, 2× magnification for discernible detail — a pragmatic choice where high throughput and reliable visual assessment are required. Simple care for consistent performance Maintaining optical clarity is straightforward: use a soft, lint‑free cloth and a mild lens cleaner; avoid abrasive materials or aggressive solvents that could damage coatings. Store the magnifier in a dry place and protect the lens from scratches during transport. Proper handling preserves both the optical quality and the functional lifetime of the frame, ensuring dependable performance across repeated inspection cycles. For procurement or specification support for the Metav IndustryLine Hand magnifier M503.133, contact Metav Werkzeuge to discuss delivery, compatibility and ordering options Technical data Article number: M503.133 GTIN: 4054469144641 Tariff number: 90138090 Numbers Lens diameter: Ø100 mm Magnification: 2× Dioptre: 2 Weight: 0.15 kg Materials & features Frame material: Metal Category: Optik eCl@ss: 21170614 Story trigger: optik FAQ What magnification and lens size does this magnifier offer? The hand magnifier provides 2× magnification (2 dioptres) with a Ø100 mm lens, supplied under SKU M503.133 for straightforward identification. Is the magnifier suitable for electronics and solder inspection? Yes, the combination of a wide lens and moderate magnification makes it appropriate for visual checks on PCBs and larger solder joints, where a comfortable working distance and rapid scanning are required. How should the lens be cleaned to avoid damage? Clean the lens with a soft, lint‑free cloth and a mild lens cleaner; avoid abrasive pads and harsh solvents to preserve coatings and optical clarity. What material is the frame made from and how does it affect durability? The frame is made from metal, providing increased structural stability and resistance to everyday workshop wear for reliable handling during frequent inspections. Can this magnifier be used for jewellery appraisal and hobby modelling? Yes, the wide field and 2× magnification suit jewellery checks, stamp and coin inspection, and model making, where both coverage and clear detail matter. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the compact 4x magnification and Ø10 mm objective to inspect close details with a wide field of view; order the MS905.208 through Metav Werkzeuge or contact our consultants for tailored advice. Peak monocular telescope MS905.208 — compact 4x inspection monocular with Ø10 mm lens Peak monocular telescope MS905.208 is a compact, single‑eyepiece optical instrument for quick visual inspection and field checks in workshops and on site 4x magnification for quick overview Ø10 mm objective for compact optics Wide field of view: 29Ø/mm and 175Ø/m Close focus at 220 mm for near inspection Efficient overview with strong optical performance The compact monocular delivers 4x magnification and a small objective diameter, providing a balance between portability and visual clarity. The combination of Ø10 mm lens and the specified field of view values supports rapid scanning of components and scenes, enabling faster decision‑making during visual inspections. Technical figures are provided for objective comparison and to support precise procurement decisions. Practical benefits for close and near inspection Designed for tasks that require attention to fine detail at relatively short distances, the instrument’s close focus of 220 mm allows inspection of small features without external focusing accessories. The compact housing, given by dimensions of Ø22.5 x 53 mm, makes the device easy to carry and position in confined spaces. The optical specifications translate into a practical tool for repetitive visual checks in maintenance, quality control or field surveying. Simple handling meets field versatility The monocular’s straightforward operation suits rapid checks and on‑the‑move use. Its single‑eyepiece layout reduces setup time and supports one‑handed handling, which is advantageous during assembly inspections or when comparing multiple components. The stated field data—29Ø/mm and 175Ø/m—indicate a broad visual coverage that simplifies locating features before a closer measurement task. Integration into workshop workflows and purchasing confidence As an easy‑to‑store and portable optical aid, this model complements measuring equipment and cameras in a workshop environment. The technical data provide a clear basis for selection within an equipment list, while the compact form reduces storage needs. For customers seeking assured supply and expert consultation, Metav’s distribution offers transparent order handling and a reliable logistics base in Emmerich. For detailed technical clarification or to acquire the Peak monocular telescope MS905.208, contact Metav Werkzeuge for personalised advice and secure delivery — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: MS905.208 Product name: Peak monocular telescope MS905.208 Lens diameter: Ø10 mm Dimensions: Ø22.5 x 53 mm Facts Magnification: 4x Close focus: 220 mm Angle: 10° Special features Brand: Peak Product type: monocular telescope Field of view: 29Ø/mm and 175Ø/m Compact optical housing FAQ What magnification does this monocular offer? The monocular provides 4x magnification, specified for the Peak monocular telescope MS905.208 to support rapid visual overview tasks. Can this device be used for near inspection tasks? Yes, the instrument has a close focus of 220 mm, which allows clear inspection of small features without additional accessories. How large is the viewing field? Field of view is listed as 29Ø/mm and 175Ø/m, indicating a broad coverage suitable for quick scanning and locating points of interest. Is the monocular suitable for workshop and field use? The compact dimensions (Ø22.5 x 53 mm) and simple one‑eyepiece design make it well suited for workshop checks and portable field inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Compact, modular accessory offering screw‑on adapters — ring, magnet, hook or 90° mirror — and compatibility with cable Ø12.0 mm for flexible inspection setups. The design supports quick attachment to the camera head and stable positioning during visual checks. Order the accessory directly via Metav Werkzeuge or ask our consultants if needed. Accessory for Photo‑Video Endoscope M503.179.3 — Screw‑on Adapters, Fits Ø12.0 mm Cable The Accessory for Photo‑Video Endoscope M503.179.3 is a modular mounting solution for industrial visual inspection applications, providing screw‑on attachment options for a variety of camera‑head tasks. Interchangeable ring, magnet, hook or 90° mirror Fits cable diameter 12.0 mm Screw‑on mounting for camera head Designed for industrial visual inspections Faster inspections through modular attachments The accessory accelerates inspection workflows by allowing quick changes between specialised attachments. With interchangeable attachments — a ring adapter, magnet adapter, hook adapter and a 90° mirror — operators can adapt the toolhead to different tasks without replacing the entire camera assembly. This modularity reduces setup time and keeps inspection cycles predictable, making the accessory especially valuable where repeated, diverse visual checks are required. Compatibility with cable Ø12.0 mm ensures a secure fit for many common probe and camera setups. Secure mounting and reliable positioning for repeatable results A screw‑on mounting interface provides stable fixation to the camera head so that attachments remain aligned under typical handling conditions. The mechanical connection supports reproducible viewing angles and consistent tool behaviour, which is crucial for fault diagnosis and documentation. By prioritising a secure attachment over ad‑hoc clamping, the accessory helps to reduce measurement variability during inspections and supports reliable image capture for records and quality control. Practical applications and workplace advantages Designed for industrial visual inspections, the accessory suits applications in maintenance, assembly verification and confined‑space checks where varied optical aids are required. The modular concept permits a single camera system to serve multiple inspection roles — reflective inspection with the 90° mirror, ferrous surface pickup using the magnet adapter, or retrieval and probing with the hook adapter. Delivered as a compact add‑on, the component supports efficient tooling strategies and complements Metav IndustryLine’s range of optical accessories for manufacturing environments. For tailored inspection solutions, request technical guidance for the Metav IndustryLine accessory (SKU M503.179.3) from Metav Werkzeuge in Emmerich — expert consultants can advise on optics, mounting options and integration with existing inspection systems Technical data Article number: M503.179.3 GTIN: 4054469167879 Customs tariff number: 85229080 Brand: Metav IndustryLine Category: Optik Numbers / Core technical data Cable diameter compatibility: 12.0 mm SKU: M503.179.3 Image asset available: m5031791-main.png Special features Screw‑on attachments: ring, magnet, hook, 90° mirror Suitable for camera head mounting Designed for industrial visual inspections Story trigger: optik FAQ Which attachments are included or supported? The accessory (Metav IndustryLine M503.179.3) supports screw‑on ring, magnet, hook and 90° mirror adapters to cover a range of inspection tasks. What cable diameter is compatible with the unit? Compatibility is specified for cables with a diameter of 12.0 mm; the M503.179.3 is designed to accept that size for secure mounting. Can this be mounted on standard camera heads used in endoscopy? Yes — the accessory is intended for screw‑on mounting to the camera head and provides a stable interface for routine visual inspections. For which applications is this accessory best suited? The accessory is ideal for industrial visual inspections, maintenance checks and confined‑space observation where rapid switching between optical aids is beneficial. What category does the product belong to and where is it listed? The item is listed under the Optik category with SKU M503.179.3 and GTIN 4054469167879. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

A compact, 100x pocket microscope in a slim Ø12.4×127 mm format with a Ø0.84 mm field of view provides immediate visual inspection of fine surfaces and defects; combine portability and magnified detail for faster QC decisions and order via Metav Werkzeuge or consult the Metav specialists for compatibility and delivery. Peak Pocket Microscope 100x — compact pocket microscope with Ø12.4×127 mm format and Ø0.84 mm field of view Peak Pocket Microscope 100x delivers a portable optical solution for rapid, close-up checks across jewellery, electronics and material surfaces in the workshop and on site Pocket format Ø12.4×127 mm 100x magnification Small field of view Ø0.84 mm Lightweight inspection tool Fast, portable inspections that reduce rework The compact design allows immediate visual checks without the need for a bench instrument. With 100x magnification, the device reveals surface features and micro-defects that are otherwise invisible to the naked eye; this makes it an effective first-line tool for preliminary acceptance checks, quick failure analysis and routine quality control. The small Ø0.84 mm field of view focuses on minute areas, so operators can verify precision details such as solder joints, gemstone inclusions or fibre structures before committing items to further processing. Practical applications across workshops and craft environments This pocket-format loupe is suited to a broad range of tasks where mobility and speed matter. Use the instrument for inspecting printed circuit boards, checking watch components, assessing surface finishes, or verifying stamps and prints. The portable nature supports rapid sampling across a production line or during customer visits, improving process transparency. By integrating this handheld optical solution into a routine inspection sequence, teams can detect faults earlier and reduce the likelihood of downstream rework. Understanding magnification, field of view and inspection technique Higher magnification increases the level of visible detail but reduces the area visible at one glance. The 100x magnification of this pocket device delivers high detail over a narrow area defined by the Ø0.84 mm field of view; therefore, effective use calls for a scanning technique—systematic movement across the sample—to cover larger surfaces. Good contrast and consistent lighting are important: although the device is supplied without specialised illumination data, pairing it with a directed light source will enhance visibility and ease defect detection during handheld inspection. Complementary tool for quality control and troubleshooting As a handheld optical aid, the pocket microscope is not a replacement for analytical microscopes but serves as a practical adjunct for rapid decision-making. It supports faster triage of suspect parts, accelerates visual sorting and contributes to traceable quality routines by reducing subjective guesswork. The slim Ø12.4×127 mm format slips easily into a pocket or toolkit, providing a convenient way to keep precision inspection close at hand for technicians, hobbyists and craftsmen alike. For tailored advice on suitability, delivery from Emmerich and local stock levels, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to discuss this pocket inspection solution and its integration into existing workflows. Technical data Article number: MS905.266 Brand: Peak Name: Peak pocket microscope 100x Category: Optics Facts Magnification: 100x Dimensions: Ø12.4×127 mm Field of view: Ø0.84 mm SKU: MS905.266 Special features Type: Pocket microscope Image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/e6/0f/d0/67/67d00fe6540165a317e1a579/MS905267-main.jpg Category path: Optik FAQ What does the Ø0.84 mm field of view mean in practice? The Ø0.84 mm field of view indicates the diameter of the area visible at once through the lens; for the Peak pocket microscope 100x this means very fine detail can be seen, but scans are necessary to inspect larger surfaces. Is this pocket microscope suitable for PCB inspection? Yes, the 100x magnification of the pocket microscope by Peak is suitable for inspecting solder joints, component leads and fine traces on PCBs, though it is best used as a quick visual aid rather than a metric measurement device. How should samples be scanned to cover a larger area effectively? Adopt a systematic scanning pattern—overlapping passes—while keeping a steady light source; the Peak pocket microscope 100x and its narrow field of view make this approach efficient for covering and documenting inspection areas. Does the product require calibration or special maintenance? No formal calibration is required for basic visual checks; keep the lens clean and free of oils or dust to maintain clarity—regular lens cleaning prolongs optical performance for the Peak pocket microscope MS905.266. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of 50× magnification and a Ø2 mm field of view to perform precise visual checks in a compact format; the sensible combination of accuracy and portability keeps inspection loops short and productive. Order directly via Metav Werkzeuge or contact the consultants for specification advice and availability. Peak Pocket Microscope MS905.268 — 50× magnification, compact pocket format Peak Pocket Microscope MS905.268 offers a handheld optical solution for close inspection tasks in workshops, laboratories and on-site checks. 50× magnification for close inspection Compact pocket design for easy transport Ø2 mm field of view for precise targeting Accurate close-up inspection for fast decision-making With 50× magnification, the handheld loupe reveals fine surface details that standard visual checks miss. The tight Ø2 mm field of view concentrates on microscopic zones, making it easier to detect cracks, burrs or material defects quickly. For operators who need fast, reliable visual evidence, this compact optical tool turns ambiguous observations into verifiable findings, reducing rework and shortening inspection cycles. Portable dimensions that fit the workshop routine The device’s physical profile of Ø12.4 × 127 mm makes it genuinely pocket-sized without sacrificing stability during use. The streamlined footprint supports mobile inspection rounds, enabling technicians to carry a dependable visual aid between benches or to client sites. This portability translates into saved time on setup and immediate access to magnified inspection whenever a rapid assessment is required. Clear optics that aid interpretation and reporting A reduced field of view helps to isolate features and supports consistent documentation: the magnified image assists in compiling clear photographic records or sketching precise measurements for quality reports. The simple optical behaviour of the instrument avoids unnecessary complexity, allowing trained staff and apprentices alike to derive actionable conclusions from each inspection while maintaining efficiency in quality-control workflows. Practical utility across routine inspection tasks Designed as a straightforward optical aid, the pocket microscope suits a range of applications from component verification to hobbyist examination, offering a balance between usability and performance. The robust simplicity of the tool supports repeatable checks and can be integrated into standard inspection protocols where rapid visual confirmation is required. Reliance on reputable optics helps teams make confident choices under time pressure. Contact Metav Werkzeuge for personalised advice on integrating the Peak pocket microscope into inspection workflows and to confirm current availability from the Emmerich warehouse. Technical Data Article number: MS905.268 Name: Peak Pocket Microscope MS905.268 Brand: Peak Facts Magnification: 50× Dimensions: Ø12.4 × 127 mm Field of view: Ø2 mm Features Category: Optics Image preview available: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/e6/0f/d0/67/67d00fe6540165a317e1a579/MS905267-main.jpg FAQ Is this pocket microscope suitable for industrial spot checks? The Peak pocket microscope MS905.268, with its 50× magnification, is suitable for rapid spot checks and visual verification of small components in industrial environments. What is the exact field of view for detailed inspection? The device provides a Ø2 mm field of view, which concentrates on small areas to reveal fine surface details during inspection. What are the physical dimensions for storage and transport? Dimensions are Ø12.4 × 127 mm, making the instrument compact enough for pocket or toolbox storage. Can the instrument be used by non-experts for quality control? Its straightforward optical design supports use by trained technicians and apprentices for routine visual checks without specialised training. Which types of visual issues is this loupe best at revealing? The strong magnification and focused field are effective for detecting surface defects such as micro-cracks, burrs and printing flaws on small parts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact inspection tool that combines 75× magnification with a Ø1.09 mm field of view for fast, reliable visual checks; the pocket-sized format (Ø12.4×127 mm) supports mobile use and tidy storage — order the Peak Pocket Microscope directly via Metav Werkzeuge or ask our consultants for tailored advice. Peak Pocket Microscope MS905.269 — 75× magnification, compact pocket design The Peak Pocket Microscope is a handheld inspection instrument designed for quick, close-up examination of surfaces and small components in workshop, laboratory and field environments. Compact pocket design, Ø12.4×127 mm 75× magnification for fine detail Ø1.09 mm field of view for precise inspection Rugged for workshop and field use Inspect fine detail with portable precision The pocket-sized optical system delivers 75× magnification, enabling clear observation of microstructures, print quality and surface irregularities without complex setup. The small Ø1.09 mm field of view focuses attention on critical details; for many inspection tasks, this narrow viewing window allows rapid identification of defects that would be missed at lower magnifications. The slender body (Ø12.4×127 mm) preserves a comfortable grip while being compact enough to fit a tool pouch, making the instrument a pragmatic choice where mobility and fast throughput are required. The optical performance is described in objective terms so purchase decisions can be based on measurable capabilities. Faster decisions at the bench and on site Designed as a practical aid for technicians and quality controllers, the device converts close inspection into actionable insight. The combination of high magnification and a defined field of view supports efficient visual quality control, reducing the need for repeated handling or time-consuming transfer to larger equipment. It is particularly suited to examining printed circuit boards, solder joints, engraving detail and printed materials where localised, high-magnification views are decisive. The compact build enables inspection in confined spaces and on-site checks, so inspection workflows can be streamlined and downtime minimised. Simple care and trusted sourcing Maintenance requirements are straightforward: keep the optics free from dust with a soft brush and use a lint-free cloth for gentle cleaning of the lens. The compact format implies limited service needs and low storage footprint. For procurement and supply reliability, Metav offers a consistent sourcing channel and quality assurance: a broad product range and an established logistics hub in Emmerich ensure dependable delivery and spare-part access. This procurement stability supports uninterrupted operations and long-term reproducibility of inspection results. Contact Metav Werkzeuge today to confirm availability of the Peak Pocket Microscope MS905.269 and to receive application-specific advice from our precision tooling specialists Technical data Article number: MS905.269 Manufacturer: Peak Category: Optics Facts Magnification: 75× Dimensions: Ø12.4×127 mm Field of view: Ø1.09 mm Special features Compact pocket design Handheld inspection tool Suitable for workshop and field use FAQ What magnification does the microscope provide? The Peak Pocket Microscope MS905.269 provides 75× magnification, allowing detailed visual inspection of small features and surface defects. What does the Ø1.09 mm field of view mean in practice? A Ø1.09 mm field of view indicates a focused viewing area for precise examination; this narrow window highlights local detail and supports targeted quality checks. Is the device suitable for on-site inspections? Yes, the pocket-sized format and handheld design make the Peak Pocket Microscope well suited for mobile and on-site visual inspections in workshops and production environments. How should the optics be cleaned and maintained? Clean the lens with a soft brush and a lint-free cloth; avoid solvents and sharp tools. The Peak Pocket Microscope benefits from simple, low-maintenance care to preserve optical clarity. Does this model include integrated illumination? No integrated illumination is specified for the Peak Pocket Microscope MS905.269; use stable external lighting for best inspection contrast and comfort. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of precise 25× magnification, a fixed reticle with 0.05 mm scaling, and a compact form factor for fast, on-the-spot dimensional checks; order the inspection tool through Metav Werkzeuge or consult their specialists for guidance and supply. Peak Pocket Microscope MS905.263 — 25× pocket inspection loupe with fixed reticle The Peak Pocket Microscope MS905.263 is a compact inspection instrument designed for quick magnification and straightforward dimensional checks in workshops, inspection benches and field checks. 25× magnification for detailed inspection Fixed reticle for quick dimensional checks Scale division 0.05 mm for fine measurement 3.3 mm field of view in compact housing Fast, reliable on-the-spot inspection that speeds up quality decisions A compact inspection loupe with 25× magnification and an integrated fixed reticle provides a practical balance between magnification and measurement capability. The combination of the 0–3 mm measurement range and a 0.05 mm scale allows precise comparators to be made visually without elaborate fixtures. For production lines and service workshops, this reduces the time spent moving parts to a measuring bench: small details are identified immediately and reject decisions can be taken with confidence. The unit’s clear optics and simple scale translate technical performance into everyday speed and reproducibility. Portable design to keep inspections close at hand The slim format (Ø12.4×127 mm) and pocket-ready construction make this loupe a genuine time-saver for engineers who need mobility. Because the instrument is lightweight and compact, routine checks are possible at the component, on the jig or directly on the machine, avoiding repetitive handling and transport. The compact shape and robust build support regular use in workshop environments, enabling faster problem isolation and fewer production interruptions. Practical portability therefore contributes directly to improved throughput and lower downtime. Clear reticle and scale for unambiguous readings The fixed template provides an immediate visual reference so that measurements are repeatable and easy to document. With a 0.05 mm scale division and a 3.3 mm field of view, the optical layout is optimised for small-feature inspection: align the reticle to the edge or mark, read the nearest whole division and estimate fractions where necessary. For users less familiar with reticles, this approach removes ambiguity—there is no need for conversion charts or electronic processing—so measurement results are straightforward to record for quality logs and audits. Built for everyday quality control across trades and labs This pocket loupe suits a wide range of users from precision workshops and QC inspectors to hobbyists requiring reliable close-up inspection. The device supports quick surface checks, solder-joint review, edge assessment and coarse dimensional monitoring without sophisticated setup. It pairs well with calibration routines and visual inspection protocols, adding an efficient step to quality workflows. Where rapid confirmation rather than micrometre-level accuracy is required, the instrument performs as a dependable first-line diagnostic tool. For fast, repeatable pocket inspection choose the Peak Pocket Microscope MS905.263 — contact Metav Werkzeuge for ordering and technical advice at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: MS905.263 Product name: Peak Pocket Microscope MS905.263 Category: Optics Facts Magnification: 25× Scale division: 0.05 mm Measurement range: 0–3 mm Field of view: Ø3.3 mm Dimensions: Ø12.4×127 mm Special features Fixed reticle (fixed template) Compact pocket design Simple visual measurement without electronics FAQ What magnification does the loupe provide? The loupe operates at 25× magnification, suitable for detailed visual inspection and small-feature checks with the Peak Pocket Microscope MS905.263. How fine are the scale graduations? Graduations are 0.05 mm, which supports precise, repeatable visual readings within the loupe’s measurement range. What is the maximum measurement range? The measurement range extends from 0 to 3 mm, allowing short-span dimensional checks directly with the fixed reticle. Is the instrument suitable for workshop use and field checks? Yes — the compact dimensions (Ø12.4×127 mm) and pocket-ready design make it well suited for workshop, inspection bench and on-site use with the Peak pocket microscope. How should reticle readings be taken for documentation? Align the reticle to the edge or feature, note the nearest whole division and estimate the fraction of the next division; record values directly in the inspection log for traceability with the MS905.263. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of 50× magnification, a fixed template and a fine 0.02 mm scale for fast, repeatable visual checks of small parts; order directly via Metav Werkzeuge or consult the team for application advice. Peak Pocket Microscope MS905.264 — 50× inspection tool with fixed template Peak Pocket Microscope MS905.264 is a compact inspection microscope designed for fast visual measurements and repeatable checks in workshop and quality-control settings. 50× magnification for fine inspection Fixed aperture template for repeatable checks Compact Ø12.4×127 mm design Graduated scale 0.02 mm for precise readings Precise visual checks that fit into serial inspection With 50× magnification and a measurement range of 0–1.6 mm, this pocket microscope is tailored for close examination of small features, burrs and finish details. The instrument’s 0.02 mm scale (equivalent to 20 µm divisions) enables quantifiable comparison rather than guesswork, so inspection steps can be standardised and documented. For production environments where consistency matters, the instrument supports faster acceptance or rejection decisions based on measurable criteria rather than subjective assessment. Compact, repeatable handling for routine workflows The compact format (Ø12.4×127 mm) and the fixed template stabilise the viewing position and simplify repetitive checks on similar parts. A consistent Ø2 mm field of view and the fixed aperture reduce variability between measurements, which improves process control in assembly, toolmaking or small-part manufacturing. The handheld form factor also makes the device easy to keep on the bench or in a tool drawer, allowing inspection to be carried out at the point of work without additional setup time. Clear measurement logic for fast interpretation Readings are taken against the graduated 0.02 mm scale, which converts visually into precise steps of 20 µm for straightforward interpretation. For users less familiar with optical inspection, the simple scale and template arrangement remove complexity: locate the feature within the Ø2 mm view, align with the template and read the closest division. This straightforward measurement approach reduces training needs while maintaining traceable, repeatable results for quality documentation. Discuss application suitability with Metav Werkzeuge or request a detailed specification sheet from Metav Werkzeuge GmbH by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: MS905.264 Manufacturer: Peak Product name: Peak pocket microscope, 50×, with fixed template Facts Magnification: 50× Measurement range: 0–1.6 mm Scale division: 0.02 mm Field of view: Ø2 mm Dimensions: Ø12.4×127 mm Special features Fixed template for repeatable positioning Pocket-sized inspection tool Graduated scale for direct readings FAQ What magnification does the device offer? The instrument provides 50× magnification, enabling detailed inspection of small features with the Peak Pocket Microscope MS905.264. What is the measurable range and resolution? Measurements are possible across a 0–1.6 mm range with a 0.02 mm (20 µm) scale division on the Peak pocket microscope for fine resolution. Is the device suitable for routine quality checks? Yes, the fixed template and compact form factor make the Peak Pocket Microscope MS905.264 well suited to repeatable, bench-level quality control tasks. How is a measurement read and interpreted? Align the feature within the Ø2 mm field of view, use the fixed template for positioning, and read the nearest 0.02 mm division; this produces repeatable, easily documented results. Can the pocket microscope be used in assembly or at the workbench? The compact dimensions (Ø12.4×127 mm) and handheld design make the instrument convenient for direct use at the workbench and in assembly areas. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of 25x magnification, a compact Ø12.4 x 127 mm design and a Ø3.3 mm field of view for reliable visual checks on small components; order the device directly via Metav Werkzeuge or consult our advisers for application guidance. Peak pocket microscope »MS905.267« — 25x magnification, compact inspection tool Peak pocket microscope »MS905.267« is a compact optical inspection aid designed for rapid, on-the-spot visual checks in workshops and inspection benches. 25x magnification for detailed inspection Compact Ø12.4 x 127 mm pocket design Field of view Ø3.3 mm for fine detail Precise 25x magnification for immediate quality decisions The 25x magnification delivers a clear enlargement that supports fast, reliable visual inspection of surface defects, solder joints and fine textures. With a field of view of Ø3.3 mm, the instrument concentrates on a small area to reveal fine details that escape unaided vision. This level of magnification is particularly effective for visual quality control where dimensional gauges are not required but a quick, accurate assessment is needed. The optical enlargement helps to reduce inspection time and to make informed pass/fail decisions without complex equipment. Pocket-sized design that fits mobile workflows With overall dimensions of Ø12.4 x 127 mm, the device is built to be truly portable and unobtrusive in a technician’s toolkit. The slender cylindrical form enables storage in a pocket or tool roll and permits rapid deployment for random checks across the production line or at a service call. The compact format supports ergonomic handling during prolonged use and contributes to a more efficient workflow when multiple items must be checked in sequence. Practical applications across workshops and hobby benches The compact magnifier is suitable for routine visual checks in optics, electronics, jewellery, textiles and stamping. The focused visual field makes it straightforward to inspect surface textures, print quality and fine features on small parts. As an optical aid, the instrument complements measuring tools by offering a quick visual confirmation prior to dimensional measurement or after machining operations. It is well suited for technicians, craftspersons and hobbyists who require a reliable visual comparator without complex setup. Simple handling and ordering information The pocket microscope is ready for immediate use from delivery with no assembly required. Its straightforward functionality keeps training and handling time to a minimum, so it can be integrated into daily inspection routines with ease. For tailored advice on whether the Peak pocket microscope meets specific application needs or for additional technical specifications, Metav Werkzeuge’s consultants are available to provide guidance and product matching. Contact Metav Werkzeuge for tailored advice on using the Peak pocket microscope for precise 25x inspections and to arrange supply directly from Emmerich. Technical data Article number: MS905.267 Manufacturer: Peak Product name: Peak pocket microscope Magnification: 25x Dimensions: Ø12.4 x 127 mm Field of view: Ø3.3 mm Facts Category: Optics SKU: MS905.267 Intended use: Visual inspection, surface checks Special features Compact pocket format Focused small-area inspection Portable inspection tool FAQ What level of detail can be expected at 25x magnification? At 25x, the Peak pocket microscope reveals fine surface structures and small defects; the Ø3.3 mm field of view concentrates on a narrow area for detailed inspection. Is the pocket microscope suitable for electronics inspection? Yes, the instrument is suitable for visual checks on solder joints and fine PCB traces; the Peak pocket microscope offers a quick visual assessment before further measurement. How portable is the device for fieldwork? The compact Ø12.4 x 127 mm format makes the device highly portable and easy to carry in a pocket or tool kit for on-site inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact inspection solution that combines 100x magnification, a 0–0.8 mm measuring range and a fine 0.005 mm scale for repeatable close-up checks; order or request advice via Metav Werkzeuge for tailored technical guidance. Peak pocket microscope with EIM, 100x A Peak pocket microscope with EIM, 100x is a handheld inspection microscope designed for rapid surface measurement and visual quality checks in workshops and laboratories. 100x magnification for detailed inspection Integrated fixed template for repeatable checks Measuring range 0–0.8 mm with 0.005 scale Compact Ø20.7 × 111 mm housing, portable Precise visual inspection in a pocket-sized format The handheld loupe delivers high-contrast imaging with 100x magnification, enabling clear identification of fine surface features and defects that are otherwise difficult to see. The combination of a narrow 0.86 mm field of view and a precise 0.005 mm scale makes the instrument suited to tasks where small dimensional differences matter, such as component edge inspection or textile and print defect detection. The compact form supports rapid, repeatable checks without complex set-up, improving throughput in routine inspection chains. Reliable measurement capability for small ranges Equipped with a measuring span of 0–0.8 mm, the device allows objective close-up measurement of shallow features and thin sections. The 0.005 mm graduation provides a verifiable quantification of minor variations, turning visual inspection into measurable data for quality records. Where millimetre-level precision is required, the integrated fixed template ensures that the same reference is used each time, reducing variability between checks and simplifying documentation in inspection workflows. Designed for portability and repeatability At Ø20.7 × 111 mm, the housing is lightweight and easy to carry between workstations. The fixed template feature supports consistent placement on the sample, while the compact optical assembly preserves image sharpness at high magnification. These design choices mean the instrument is both portable and suited to repeated use on the shop floor, in service benches or at incoming goods inspections, where rapid decisions are necessary without compromising on measurement reliability. Practical applications and added confidence The pocket microscope is applicable across a wide range of tasks in optics, electronics, jewellery, and small-part manufacturing where visual and small-range dimensional checks are routine. Its simplicity reduces training overhead, while the measurable scale and template enhance traceability in quality processes. For specialised or atypical inspection challenges, technical clarification is available to ensure the tool is matched correctly to the application. Contact Metav Werkzeuge for detailed technical advice or to arrange a product enquiry; Metav Werkzeuge’s consultants can advise on fit-for-purpose use and delivery from Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: MS905.407 Name: Peak pocket microscope with EIM, 100x Dimensions: Ø20.7 × 111 mm Field of view: Ø0.86 mm Scale: 0.005 mm Measuring range: 0–0.8 mm Special feature: with fixed template Facts Magnification: 100x Measuring range: 0–0.8 mm Scale increment: 0.005 mm Field of view: Ø0.86 mm Dimensions: Ø20.7 × 111 mm SKU: MS905.407 Special features Fixed template for repeatable placement EIM included (per designation) Category: optics FAQ What magnification does the pocket microscope provide? The Peak pocket microscope provides 100x magnification, enabling detailed visual inspection of small features. What is the measurable range and resolution of the device? Measurement capability is 0–0.8 mm with a 0.005 mm scale, suitable for shallow feature assessment and fine gap checks. How small is the field of view at high magnification? The instrument offers a 0.86 mm field of view, which concentrates observation on very small areas for precise defect detection. Is the fixed template suitable for repeat checks? Yes, the integrated fixed template is designed to enable repeatable placement and consistent comparative measurements. Can the pocket microscope be used on the shop floor? The compact Ø20.7 × 111 mm housing and portable design make it appropriate for workshop or inspection-bench use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of portable 25× magnification and a 0.05 mm graduated measuring scale for consistent, repeatable checks on small components; order directly via Metav Werkzeuge or consult the team for further technical information. Peak Pocket Microscope MS905.404 — 25× magnification, integrated measuring scale A Peak pocket microscope designed for quick visual inspection and precise measurement of small parts in workshop and quality control environments 25× magnification for detailed visual inspection Built-in measuring scale with 0.05 mm graduation Measurement range 0–3 mm for small parts Fixed template for repeatable measurements Precise, measurable inspection in a pocket-sized tool Equipped with 25× magnification and a calibrated measuring scale, this pocket microscope turns visual checks into quantifiable inspections. The integrated scale with 0.05 mm graduation enables clear numeric comparison when assessing edges, threads or surface defects; the tool’s measurement range (0–3 mm) makes it suitable for verifying small tolerances directly at the bench. The combination of visual magnification and precise graduation reduces interpretation errors and supports traceable quality decisions in production and repair workflows. Compact form that supports on-site efficiency With compact dimensions of Ø20.7 x 111 mm, the instrument is purpose-built for portability and rapid deployment. The small footprint and pocket format allow technicians to carry a reliable inspection aid between workstations, minimizing interruptions to the production flow. The Ø3.5 mm field of view balances magnified detail with a practical observation window, so assessments are both precise and efficient without cumbersome equipment setup. Consistent results through repeatable measurement aids The design includes a fixed template that standardises the positioning of specimens and simplifies repeated checks. This feature reduces variability introduced by manual handling and speeds up routine inspection cycles. The integrated measuring function (EIM) complements the template by delivering direct numerical readings, turning subjective visual inspections into reproducible, documented findings suitable for quality control records or maintenance reports. For reliable, portable inspection equipment from Peak, contact Metav Werkzeuge for specialist advice or to arrange procurement: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany — info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: MS905.404 Brand: Peak Dimensions: Ø20.7 x 111 mm Magnification: 25× Field of view: Ø3.5 mm Measurement range: 0–3 mm Scale graduation: 0.05 mm Special feature: fixed template Facts Ø20.7 x 111 mm Ø3.5 mm field of view 25× magnification 0.05 mm graduation Measurement range 0–3 mm Special features Fixed template for repeatable measurement Integrated measuring function (EIM) Pocket-sized inspection tool FAQ Is the pocket microscope suitable for inspections on the shop floor? Yes. The Peak pocket microscope MS905.404 is pocket-sized for workshop use and provides magnified visual inspection with a built-in measuring scale for on-the-spot checks. What is the smallest dimension that can be measured reliably? The instrument’s scale offers a 0.05 mm graduation and a measurement range from 0 to 3 mm, making it appropriate for fine-detail measurement of small components. What magnification and observation window are provided? The device delivers 25× magnification with a field of view of approximately Ø3.5 mm, optimised for close-up inspection of surfaces and fine features. How does the fixed template improve measurement tasks? The fixed template standardises specimen placement, ensuring repeatable positioning and reducing variance between successive measurements for consistent inspection results. Can the microscope support quality control documentation? Yes. By combining a calibrated scale with repeatable positioning, the pocket microscope MS905.404 supports documented, numeric checks that can be recorded in quality reports. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of precise 75x magnification, a 0–1 mm measurement range with 0.01 mm graduations and a fixed template for repeatable checks; these features support reliable micro-inspection and faster decision-making on the shop floor. Order the MS905.406 directly via Metav Werkzeuge or ask our consultants if needed. Peak Pocket Microscope MS905.406 — 75x inspection microscope with fixed template The Peak Pocket Microscope MS905.406 is a compact inspection instrument designed for close-up visual inspection and small-range measurement in production and quality-control environments *Pocket-sized inspection microscope *Fixed measurement template for repeatable checks *High 75x magnification for detailed observation Accurate micro-inspection for fast decisions The MS905.406 delivers 75x optical magnification combined with a fine 0.01 mm scale, enabling precise readings across a 0–1 mm measurement range. With a narrow Ø1.1 mm field of view, the instrument focuses on minute details, which reduces ambiguity during visual assessment and speeds up inspection cycles. In practice, this means fewer secondary checks and quicker pass/fail decisions, improving throughput without compromising on measurement reliability. The optical performance supports both visual evaluation and simple comparative measurements, so small dimensional deviations are recognised immediately. Repeatability and process integration for quality control Equipped with a fixed measurement template, this pocket microscope provides a stable reference for repeated checks, lowering variability between operators and shifts. The inclusion of EIM ensures consistent alignment during inspection routines, making the instrument suitable for standardised quality-control tasks and incoming part checks. Because the design prioritises repeatable positioning and a clear measurement scale, documentation and traceability of inspection results become more straightforward, supporting ISO-style process requirements and internal quality audits. Practical handling that suits the workshop environment The compact format — Ø20.7 x 111 mm — makes the device genuinely portable and easy to store on a workbench or in a tool kit. Its pocket-friendly dimensions and robust construction are optimised for everyday use in busy production areas, enabling quick spot checks without interrupting workflow. The combination of a small footprint and a precise optical system means the instrument is effective for field inspection, bench work and routine quality sampling. For operations seeking to reduce measurement bottlenecks, this instrument contributes to smoother production flow and clearer inspection results. Contact Metav Werkzeuge for technical advice and to arrange procurement of the MS905.406; eMail info@metav-werkzeuge.com or call +49 2822 7131930 for personalised consultation Technical Data Article number: MS905.406 Brand: Peak Product: Pocket microscope MS905.406 Facts Magnification: 75x Scale: 0.01 mm Measurement range: 0–1 mm Field of view: Ø1.1 mm Dimensions: Ø20.7 x 111 mm Special features Fixed measurement template With EIM Category: Optics FAQ What measurement range can be inspected with this pocket microscope? The MS905.406 covers a 0–1 mm measurement range with a 0.01 mm scale suitable for fine thickness and gap checks. Is the instrument suitable for repeated quality checks on production items? Yes, the fixed measurement template and consistent optics of the Peak pocket microscope support repeatable inspections and standardised sample checks. How fine is the field of view and what does it mean for inspection? The field of view is Ø1.1 mm, which concentrates observation on very small areas for high-detail inspection and precise visual comparison. Does the device require additional accessories to perform measurements? No additional accessories are required for basic inspection and template-based measurements; the integrated scale and fixed template enable immediate use. Can the microscope be used at the workbench and in the field? Its compact Ø20.7 x 111 mm format and robust design make the instrument well suited for both bench work and mobile spot checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com