Mikroskopie für Profis, Fortgeschrittene und Einsteiger

Benefit from portable inspection with 50x magnification, an integrated 0.02 mm measuring scale and a fixed template for repeatable checks; ideal for quality control and field work. Order the pocket microscope directly via Metav Werkzeuge or contact our consultants for application advice. Peak Pocket Microscope MS905.405 — 50x inspection loupe with measurement scale A Peak Pocket Microscope MS905.405 designed for portable 50x inspection and straightforward dimensional checks in workshops and on-site quality control. 50x magnification for detailed inspection Integrated 0.02 mm scale for precision checks Ø1.7 mm field of view for concentrated viewing Compact Ø20.7×111 mm housing for portability Fast, measurable inspection where it matters The handheld loupe delivers 50x magnification in a compact footprint, making close visual inspection possible without a bench microscope. The built-in 0.02 mm scale permits immediate, numerical comparison of small features and gaps; measurements are taken across a 0–1.6 mm range for fine tolerances. This configuration suits quick acceptance checks and component verification in production lines, where rapid, measurable results reduce batch rework and speed up decision making. Repeatable placement for consistent results Equipped with a fixed template, this pocket microscope ensures consistent sample positioning for repeat checks and simple go/no-go inspections. The Ø1.7 mm field of view concentrates the area of interest, improving repeatability when comparing features across multiple parts. Because the instrument combines a fixed reference and a fine scale, it supports standardised workflows in inspection routines and helps maintain traceable visual records during routine quality control. Portable, robust design for workshop and field use The device’s compact dimensions (Ø20.7×111 mm) make it convenient to carry in a toolkit or on a belt, while the solid construction is tolerant of typical workshop handling. The form factor permits quick transfer between stations and immediate use at the point of failure or inspection. For technicians and inspectors who need a reliable handheld instrument, this loupe balances precision and portability without the complexity of larger optical systems. Clear readout and practical operation A clear scale with a 0.02 mm graduation simplifies reading and reduces interpretation errors under industrial lighting. The combination of magnification and scale turns subjective visual checks into objective, repeatable measurements, so small deviations are identified early. Supplied with essential features for quick assessment, the instrument supports faster troubleshooting and contributes to continual process improvement in small-part manufacturing. Contact Metav Werkzeuge for a tailored consultation on the MS905.405 and to discuss suitability for specific inspection tasks Technical data Article number: MS905.405 Brand: Peak Product type: Pocket microscope Facts Magnification: 50x Scale: 0.02 mm Measurement range: 0–1.6 mm Field of view: Ø1.7 mm Dimensions: Ø20.7×111 mm Special features Fixed template included EIM included Portable handheld design FAQ What magnification does this pocket microscope offer? The Peak Pocket Microscope MS905.405 provides 50x magnification, suitable for detailed visual checks of small components. How fine is the measuring scale on the loupe? The integrated scale has a 0.02 mm graduation, enabling precise comparative measurements within the 0–1.6 mm range. Is the field of view suitable for small feature inspection? Yes, the Ø1.7 mm field of view concentrates observation on small details, improving focus and repeatability for inspection tasks. Does the instrument support repeatable positioning? The fixed template supplied with the MS905.405 ensures repeatable placement for consistent, comparable checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of 15x magnification and an achromatic, coated lens to speed up inspection tasks and reduce rework; the integrated large acrylic cap protects optics during storage. Order directly via Metav Werkzeuge for reliable supply and advice, or contact the Metav consultants for technical clarification. Peak magnifier 15x — coated achromatic lens, acrylic cap A Peak magnifier 15x for precise visual inspection and close-up work in workshops, laboratories and hobby settings. 15x magnification for detailed inspection Coated, achromatic lens for high clarity Large acrylic cap protects the optics Compact Ø27/Ø36x33 design for easy handling Higher accuracy through improved optics The combination of 15x magnification and an achromatic, coated lens delivers clearer, more faithful images than standard single-element magnifiers. Chromatic aberration—colour fringing that blurs fine edges—is reduced by the achromatic design, while the multi-layer coating increases light transmission and reduces reflections. For inspection tasks where measurement and defect detection matter, this optical configuration improves decision-making and reduces the likelihood of costly rework. Practical design that protects fragile optics A durable large acrylic cap is supplied to shield the lens from dust and knocks when not in use. The compact construction with dimensions Ø27/Ø36x33 mm keeps the instrument easy to store and quick to deploy at the bench. The small footprint facilitates handheld use as well as placement on inspection jigs, enabling quicker routine checks without compromising stability or field of view. Clear relevance for diverse precision tasks This magnifier is suited to electronics inspection, jewellery and watchmaking, stamp and print inspection, model-making and other precision trades. The combination of strong magnification and corrected optics supports tasks that require detailed visual assessment rather than measurement alone. For workshops seeking affordable, reliable visual tools, the magnifier bridges the gap between simple loupe and fixed microscope. Low-maintenance handling and straightforward integration Cleaning is simple: keep the lens covered with the supplied acrylic cap when idle and use a soft, lint-free cloth with approved optical cleaner for routine maintenance. The robust yet compact form means minimal ancillary equipment is required to integrate the magnifier into existing workstations. For buyers who prioritise dependable everyday performance, the unit combines practical handling with optical reliability. For confident close-up inspection with Peak’s 15x achromatic optics, contact Metav Werkzeuge for tailored advice and dependable delivery from Emmerich; e‑mail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: MS905.114 Name: Peak magnifier Magnification: 15x Lens: coated and achromatic Special feature: with large acrylic cap Dimensions: Ø27/Ø36x33 Category: Optics Facts Magnification value: 15x Size specification: Ø27/Ø36x33 Special features Coated, achromatic lens Large acrylic cap for protection Compact, portable design FAQ What level of magnification does the magnifier provide? The magnifier offers 15x magnification, suitable for detailed visual inspection tasks where small features must be examined closely. How does the achromatic, coated lens improve image quality? The achromatic design reduces colour fringing and the multi-layer coating increases light transmission and contrast, resulting in sharper, more accurate images for inspection. Is the optical element protected in storage? Yes, the device includes a large acrylic cap that shields the lens from dust and accidental scratches during storage. Which tasks are best suited to this magnifier? The magnifier is ideal for electronics, jewellery and watch inspection, stamp and print checking, and other precision hobbies and workshop tasks requiring close visual scrutiny. Can this magnifier replace a microscope for measurement work? This magnifier supports detailed visual checks but is not a measuring microscope; consider a dedicated microscope or measuring system for calibrated dimensional inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Compact optical inspection with a focus on clarity and portability: combine 22× magnification, a coated, achromatic lens and a compact Ø28×30 form for efficient verification of fine work. Order the loupe directly via Metav Werkzeuge or consult our specialists for application advice. Peak loupe 22× – Coated, achromatic lens for precision inspection The Peak loupe is a compact optical loupe designed for inspection and verification tasks in workshops and quality control environments, offering high-contrast magnification for precision work. Coated achromatic lens for colour-correct imaging 22× magnification for fine detail inspection Compact Ø28×30 design for handheld use Suitable for verification of precision work Sharp, low‑distortion imaging for reliable decisions The loupe delivers 22× magnification with a coated, achromatic lens, which reduces chromatic aberration and improves image contrast. An achromatic lens pairs elements of different glass types to correct colour fringing; the result is a clearer, truer view of edges and surfaces. For inspection tasks where dimensional judgements and surface assessment are required, this optical combination supports reproducible observations and reduces the risk of false readings. The optical performance is stated in measurable terms so that inspection processes can be planned with predictable visual acuity. Compact layout engineered for everyday workshop use With a compact Ø28×30 footprint, the instrument is suitable for handheld examination and benchside checks without obstructing the workpiece. The small form factor makes handling straightforward and enables rapid switching between tools and measuring instruments during an inspection routine. Durability in the workshop environment is supported by the coated surfaces of the optics, which minimise reflections and ease cleaning. The design is therefore aligned with operational efficiency: quick visual checks are possible without a dedicated station, speeding up process control and reducing cycle time for routine inspections. Wide applicability across precision trades and quality control The loupe is suited to a range of applications where fine detail must be assessed: component inspection, solder joint review, watch and jewellery appraisal, and general quality control tasks. Its high-contrast optics are especially useful when verification of edges, prints and etched markings is required. Because the device is intended for verification rather than measurement, it complements calibrated instruments such as a precision caliper by enabling rapid visual confirmation before and after measurement. For environments that demand traceable workflows, the loupe provides consistent visual reference during acceptance procedures. Contact Metav Werkzeuge for tailored application advice, availability and ordering—call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com to discuss suitability for specific inspection tasks Technical data Article number: MS905.116 Name: Peak loupe Brand: Peak Facts Magnification: 22× Dimensions: Ø28×30 Special features Lens: coated and achromatic Suitable for inspection of precision work Category: Optics FAQ What level of magnification does the loupe provide? The loupe offers 22× magnification, which is suitable for detailed visual inspection of fine features and surface conditions. How does the achromatic coating improve the image? An achromatic, coated lens minimises colour fringing and surface reflections, producing sharper, higher‑contrast images for more reliable visual assessment. Is the loupe suitable for workshop use alongside measuring tools? Yes. The loupe is designed for benchside and handheld inspection and complements measurement tools such as a precision caliper when verifying small parts and assemblies. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the compact Ø30 barrel and precise 10x magnification together with a wide 23 mm field of view for reliable inspection work; order the eyepiece directly via Metav Werkzeuge or consult the team for integration advice. SWH10X-CM eyepiece (10x magnification, Ø30 barrel) — Metav IndustryLine The SWH10X-CM eyepiece is a high-clarity optical accessory for stereo microscopes, designed to extend magnification and improve visual throughput in inspection and assembly tasks 10x magnification for detailed inspection Ø30 barrel for standard stereo microscope fit 23 mm field of view for wider scene coverage Lightweight construction at 0.15 kg for easy handling Consistent detail and measurement confidence with every observation The eyepiece delivers a 10x view that increases image detail without compromising ease of use, enabling quicker recognition of fine features during inspection. A 23 mm field of view provides a broader visual context than narrower oculars, reducing the need for frequent repositioning of components under the lens and thereby speeding up repetitive tasks. Optical consistency is particularly beneficial in quality control and small-assembly environments where repeatable visual assessment reduces rework and shortens cycle times. In practical terms, the combination of magnification and field size supports both visual checks and documentation routines where seeing more at once saves time. Seamless integration and ergonomic handling for workshop workflows Engineered with a Ø30 barrel, the eyepiece is compatible with common stereo microscope tubes and can be swapped quickly to adapt existing setups. The compact, lightweight design lowers the moment of inertia at the optical head, improving comfort during prolonged use and decreasing operator fatigue. For bench work and small-batch inspection, this means users can sustain attentive inspection for longer periods without loss of precision. The straightforward fit and handling characteristics also simplify inventory management: fewer adapters or special mounts are required when increasing magnification across multiple stations. Practical benefits for production and laboratory environments Beyond visual quality, the eyepiece contributes to measurable workflow gains: broader scene capture reduces handling time per part, and a stable optical interface improves consistency across multiple operators. The optical accessory suits routine inspection, soldering control, fine assembly and lab evaluation tasks where a reliable enlarged image is essential. Constructed for everyday use, the eyepiece balances robust handling with optical clarity, helping teams maintain throughput while upholding inspection standards under varying production conditions. For tailored advice on integrating the SWH10X-CM eyepiece into an existing microscope system or for delivery from Metav’s Emmerich distribution, contact Metav Werkzeuge by phone +49 2822 7131930 or email info@metav-werkzeuge.com — assistance is available to match the optical accessory to the specific inspection task. Technical data Article number: M503.241.5 GTIN: 4054469145167 Type: SWH10X-CM Facts Magnification: 10x Field of view: 23 mm Barrel diameter: Ø30 Weight: 0.15 kg Customs tariff number: 90119090 Special features Compatibility: stereo microscopes Compact, lightweight design Suitable for inspection and assembly tasks Brand: Metav IndustryLine FAQ What magnification does this eyepiece provide? The SWH10X-CM eyepiece offers a 10x magnification level suitable for detailed visual inspection. Which microscopes will this eyepiece fit? This eyepiece is designed for stereo microscopes with a Ø30 barrel tube and fits standard stereo optical heads. How wide is the visible scene through the eyepiece? The eyepiece provides a 23 mm field of view, allowing a wider area to be seen at once compared with narrower oculars. Is the eyepiece suitable for prolonged use at a workstation? Yes, the lightweight construction (0.15 kg) and ergonomic dimensions make it appropriate for extended inspection and assembly tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of 20x magnification, a Ø30 mm barrel, and a generous 14 field of view to upgrade inspection capability with minimal integration effort; order the ocular directly via Metav Werkzeuge or consult the technical team for compatibility advice. SWH20X-CM-1 eyepiece — 20x magnification, Ø30 mm barrel (Metav IndustryLine) A SWH20X-CM-1 eyepiece engineered to increase magnification for stereo microscopes and improve visual resolution in inspection and assembly tasks. 20x high-power magnification Ø30 mm barrel for standard mounts Wide 14 field of view Robust construction for repeated use Clearer detail where it matters The 20x magnification provides a substantial increase in apparent detail without the need to change the core microscope head, making fine inspection and component verification more efficient. With a Ø30 mm barrel the eyepiece fits standard stereo microscope mounts, so optical integration is straightforward. The nominal 14 viewing parameter yields a comfortable observable area that balances magnification with a usable field, reducing the need for excessive stage repositioning during quality checks. Built for frequent workshop use Designed with routine industrial use in mind, the ocular combines optical power and handling convenience to support repetitive inspection cycles. The construction emphasises reliability and easy seating in the eyetube to maintain alignment over multiple shifts. This stability translates into faster throughput and fewer re‑set checks, so measurement work and visual controls remain consistent across batches. Easy integration with existing systems Compatibility with standard stereo microscope fittings simplifies the upgrade path: the Ø30 mm mount is common across many laboratory and bench microscopes, permitting quick replacement or addition of the eyepiece. The compact barrel format keeps the optical axis steady and minimises vignetting, allowing technicians and inspectors to preserve familiar workflows while benefiting from enhanced magnification and a broader viewing area. A dependable partner for precise optics As part of the Metav IndustryLine range, this ocular benefits from a distribution and quality filter based in Emmerich that supports reliable supply to European workshops. Metav’s position as a long‑standing precision partner means the component is available alongside complementary optical accessories and technical guidance, supporting a practical route from specification to deployment. Contact Metav Werkzeuge for tailored advice on Metav IndustryLine optics and to confirm fitment for the SWH20X-CM-1 — email info@metav-werkzeuge.com or phone +49 2822 7131930 for prompt assistance from the Emmerich team Technical data SKU: M503.241.7 GTIN: 4054469145174 Type: SWH20X-CM-1 Name: Okular Category: Optik EClass: 21160592 Key figures Magnification: 20x Barrel diameter: Ø30 Field of view: 14 Weight: 6.15 kg Tariff code: 90119090 Features & compatibility Suitable for stereo microscopes Standard Ø30 mount compatibility High-power ocular optics Asset available: m5032411-main.jpg Category path: Optik FAQ What magnification does this eyepiece provide? The SWH20X-CM-1 provides 20x magnification for detailed inspection work. Which mounting size is required for installation? The ocular uses a Ø30 mm barrel suitable for standard stereo microscope mounts. What does the value "14" refer to in the specification? The figure 14 denotes the eyepiece’s field‑of‑view parameter, indicating a generous observable area at 20x. Is the SWH20X-CM-1 suitable for industrial inspection benches? Yes, the SWH20X-CM-1 is intended for workshop and laboratory inspection use and is compatible with common bench stereo microscopes. Is an image of the product available for review? An asset is provided (m5032411-main.jpg) for visual reference of the ocular. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from precise visual inspection with 10x magnification and a 23 mm field of view, packed into a standard Ø30 mm tube for straightforward integration with existing stereo microscopes. Order the eyepiece directly via Metav Werkzeuge or consult our specialists to ensure optical matching and quick delivery. Eyepiece SWH10X – 10x magnification, 23 mm field, Metav IndustryLine Eyepiece SWH10X is a precision optical accessory designed to increase the effective magnification of stereo microscopes for inspection, quality control and assembly tasks. 10x magnification for detailed inspection 23 mm wide field of view for efficient scanning Ø30 mm tube fits standard stereo microscopes Balanced weight for stable, low-vibration imaging Sharper inspection with proven optical gain The combination of 10x magnification and a 23 mm field of view accelerates visual inspection without compromising the overview needed for efficient scanning. Magnification increases the apparent size of details while field of view determines how much of the object is visible at once; the chosen balance reduces the number of repositioning steps during component checks and shortens inspection cycles. For workshops and inspection benches this translates into measurable throughput gains and fewer missed defects, supporting leaner quality processes. Straightforward integration into workplace optics Built to the common industry tube standard, the Ø30 mm tube ensures compatibility with a wide range of stereo microscopes and trinocular heads. The optical accessory inserts and secures in typical eyepiece holders, delivering consistent alignment and image centring. A compact, well scaled mass supports stable imaging with reduced hand‑induced vibration on benchtop stands. This reliability keeps measurement and visual inspection repeatable across shifts and operators, which is essential for production environments that rely on consistent visual standards. Practical handling and routine maintenance for industry use The optical accessory was conceived for daily use in production, laboratory and service settings: straightforward cleaning, rapid exchange and durable optics preserve performance over time. The compact design eases storage and transport between workstations, and the stable imaging characteristics support both manual inspection and documentation tasks such as photomacrography when integrated into camera-equipped stereo setups. For procurement and specification checks, the item is listed under Metav IndustryLine with clear identifiers for fast sourcing. Choose the Metav IndustryLine SWH10X eyepiece for reliable inspection results; contact Metav Werkzeuge for tailored specification advice and procurement at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: M503.241.1 GTIN: 4054469145129 eClass: 21160592 Type: SWH10X Facts Magnification: 10x Field of view: 23 mm Tube diameter: Ø30 mm Weight: 0.5 kg Customs tariff number: 90119090 Applications / Features Designed to expand magnification of stereo microscopes Category: Optik Intended for inspection, assembly and quality control tasks Storytrigger: optik FAQ What microscopes is this eyepiece compatible with? The eyepiece is designed for standard stereo microscopes with a Ø30 mm eyepiece tube and is supplied as the Metav IndustryLine SWH10X (SKU M503.241.1). What image area can be expected with this accessory? The accessory provides a 23 mm field of view at 10x magnification, which balances detailed enlargement with efficient scanning of components. How does the SWH10X improve inspection workflows? By increasing apparent detail while maintaining a wide field, the SWH10X reduces repositioning and speeds visual checks, helping quality control and assembly lines to be more efficient. Are there any special mounting or adapters required? No special adapter is normally required for microscopes with a Ø30 mm eyepiece tube; compatibility details are listed under SKU M503.241.1 for procurement checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combining 10× magnification with a compact Ø34×41 profile, this loupe enables fast, reliable visual checks of textiles, surface structures and photographic negatives while reducing inspection time and rework; order the Peak Lupe directly via Metav Werkzeuge or consult the specialists for application advice. Peak Lupe 10× – Inspection loupe with 10× magnification and compact Ø34×41 profile The Peak Lupe is an inspection loupe offering 10× magnification for close examination of textiles, surface structures and photographic negatives in workshops, studios and quality-control stations 10× magnification for detailed inspection Compact Ø34×41 profile for tight spaces Suitable for textiles, surfaces and negatives Faster, more reliable visual checks in quality workflows With a clear 10× magnification, the inspection lens brings small details into sharp view, enabling quicker defect detection and fewer overlooked faults. The optical performance supports repeatable surface assessment and close visual measurement tasks, so inspection cycles become more efficient. By using a precise handheld magnifier, operators can verify fineness of weave, surface texture and contrast in negatives without resorting to larger microscopy equipment, helping maintain throughput and reduce downstream corrective work. Compact handling that fits into routine inspections Designed for portability and frequent use, this compact loupe integrates simply into existing inspection routines. The small Ø34×41 footprint allows placement on crowded benches or in inspection pockets, making it suitable for on-the-spot checks in production lines and photographic studios. The loupe’s form supports steady handheld operation and short-duration examinations, so visual control tasks can be completed quickly while maintaining consistent precision across multiple components or frames. Clear application focus and practical benefits Intended for the inspection of textiles, fine structures and photographic negatives, the magnifier provides a clear field for visual grading and documentation tasks. The optical tool assists in identifying fibre flaws, surface inconsistencies and film grain issues that are otherwise difficult to appraise with the naked eye. As a simple, low-footprint instrument, it complements more advanced metrology tools by offering an immediate, low-cost method for preliminary analysis and sorting prior to laboratory measurement. Contact Metav Werkzeuge today to discuss how the Peak Lupe 10× can improve inspection accuracy in your workflow; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: MS905.112 Manufacturer: Peak Designation: Peak Lupe Core Data Magnification: 10× Dimensions: Ø34×41 Special features Suitable for inspection of textiles, structures and photographic negatives Category: Optik FAQ What magnification does the loupe provide? The loupe offers 10× magnification, enabling detailed visual inspection for small features and defects. Which materials and applications are suitable for this magnifier? The inspection lens is suitable for the examination of textiles, surface structures and photographic negatives, supporting routine quality checks. Is the loupe portable enough for production-line use? Yes, the compact Ø34×41 profile makes the loupe easily portable and convenient for on-the-spot inspections. How does the Peak Lupe support visual quality control? By magnifying small imperfections and surface details, the loupe speeds up preliminary sorting and reduces the need for immediate lab-level analysis. What is the article number for ordering and reference? The article number for ordering is MS905.112, listed under the Peak inspection loupe. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combine 15x magnification, a 0.1 mm scale and a compact Ø20 mm sight field for reliable small-part inspection; benefit from precise readings across a 0–14 mm measuring range. Order the loupe directly via Metav Werkzeuge or consult our specialists for suitability and stock information. Peak Measuring Loupe MS905.270 — 15x magnification, 0–14 mm range A compact Peak Measuring Loupe 15x designed for precise inspection and direct measurement of small components in workshops and quality-control environments 15x magnification for detailed inspection 0.1 mm scale for precise measurement Ø20 mm sight field for clear visibility Faster, more reliable small-part measurement with clear magnification The combination of 15x magnification and a 0.1 mm scale converts close visual inspection into measurable data, enabling consistent checks of small components without constant tool changes. The integrated scale covers a 0–14 mm range, which supports repetitive measurement tasks and reduces handling time. Using a single inspection instrument for both visual assessment and direct measurement improves throughput and lowers the risk of measurement errors, which benefits production continuity and quality assurance workflows. Compact layout that fits the bench and the hand for routine inspection With an overall dimension of Ø35 x 33 mm and a generous Ø20 mm sight field, the loupe combines a small footprint with comfortable observation area. The resulting compact design allows easy placement next to assembly jigs or on inspection benches without obstructing adjacent tools. The clear sight field delivers quick orientation on parts such as circuit boards, fasteners or jewellery, so inspection cycles are shorter and tactile handling is minimised, supporting cleaner, safer workflows in confined workspaces. Integrates into quality routines to cut rework and speed decisions The inspection magnifier converts a visual check into an actionable measurement, making it suitable for inline quality checks, first-article inspections and repair benches. Faster decision-making is enabled by the clear, scalable readout and the magnified view, which together reduce uncertainty and the need for repeat measurements. For labs and workshops seeking to standardise basic dimensional checks, this instrument provides a dependable, low-complexity solution that supports consistent traceability and fewer production interruptions. Contact Metav Werkzeuge for availability and tailored technical advice on the Peak Measuring Loupe MS905.270 — mention the SKU for faster handling by our specialists Technical data Article number: MS905.270 Manufacturer: Peak Product name: Peak Measuring Loupe 15x Facts Magnification: 15x Measuring range: 0–14 mm Scale: 0.1 mm Sight field: Ø20 mm Dimensions: Ø35 x 33 mm Special features Compact inspection loupe Direct measurement capability Suitable for small-part inspection and quality control FAQ How precise are measurements with this loupe? The loupe provides a 0.1 mm scale and 15x magnification, enabling repeatable measurements across the stated 0–14 mm range for routine dimensional checks. Can this instrument be used for electronic components and jewellery? Yes; the enlarged view and Ø20 mm sight field make the loupe suitable for inspection of small electronic parts, jewellery and other fine-detail components. Is the loupe handheld or bench-mounted? The device is designed for handheld inspection and for easy placement on benches; its compact design and small footprint suit diverse workshop setups. Does the Peak Measuring Loupe require calibration? For standard workshop checks the integrated 0.1 mm scale is used as supplied; if traceable calibration is required, consult Metav Werkzeuge for recommended procedures. What is the product reference for ordering? Order or request information quoting the article number MS905.270 for the Peak Measuring Loupe 15x to ensure precise handling of enquiries. Manufacturer: Peak; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of compact design, clear optics and simple handling for efficient visual inspection in workshop and field tasks. The loupe’s 5× magnification and pocket-friendly dimensions ensure quicker defect detection and easier marking checks; order directly via Metav Werkzeuge or consult our specialists for technical guidance. Peak Lupe — Inspection loupe with clear optics for workshop use A compact inspection loupe by Peak Lupe suitable for general workshop inspection, measuring support and close-up visual checks in electronics, jewellery or mechanical workshops. 5× magnification for precise inspection Compact Ø35×55 design for tight spaces Suitable for general caliper applications Pocket-friendly inspection lens for field use Faster, more reliable visual checks with high magnification The 5× magnification delivers a clear enlargement that reduces inspection time and increases detection reliability for small flaws, solder joints or engraved markings. As a practical inspection tool, the magnifier helps transform visual uncertainty into measurable observations; the optical enlargement brings fine details within comfortable viewing distance, shortening iterative checking cycles and improving process throughput. Compact form factor that fits the workshop workflow With a small footprint of Ø35×55, this loupe is designed to be carried and used wherever quick inspections are required. The compact shape allows access to confined spaces and close proximity work without obstructing tools or instruments. Compatibility with common measurement routines is supported by its suitability for general caliper applications, enabling clearer readings of scale marks and verification tasks alongside precision measuring instruments. Low-maintenance handling for daily use The optical design prioritises straightforward handling: hold the lens steady, position the object at the correct working distance and inspect. Routine care is simple — wipe the lens with a lint-free cloth and keep it in a protective pouch between uses to avoid scratching. These practical maintenance steps preserve the loupe’s performance and ensure consistent clear optics over time, reducing downtime and maintaining inspection quality. Versatile for multiple trades and inspection needs This inspection loupe is a versatile addition for technicians, watchmakers, electronics assemblers and quality controllers who need rapid visual verification. The compact magnifier supports both detailed inspection and quick go/no-go checks, making it a useful companion at the bench or on-site. The straightforward functionality means it integrates easily into existing workflows, providing measurable benefits in accuracy and speed. For a reliable purchase and expert advice on the Peak Lupe, contact Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com for product information and ordering options Technical Data Article number: MS905.110 Name: Peak Lupe SKU: MS905.110 Facts Magnification: 5× Dimensions: Ø35×55 Category: Optics Special features Suitable for general caliper applications Brand: Peak Image available: MS905110-main.jpg FAQ How strong is the magnification and what does it show? The loupe offers 5× magnification, which brings small surface details, solder joints and fine markings into clear view for inspection and verification. Can this loupe be used alongside precision calipers? Yes — the Peak Lupe is suitable for general caliper applications and supports clearer reading of scale marks during measurement tasks. Is specialised maintenance required to keep the optics clear? No specialised maintenance is needed; regular cleaning with a lint-free cloth and protective storage will maintain the loupe’s clear optics. Which trades benefit most from this inspection loupe? Technicians in electronics, jewellery, watchmaking and mechanical workshops benefit from the compact magnifier for quick defect detection and detail checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from precise 7× magnification and an achromatic lens for accurate visual inspection; the integrated illumination keeps details visible even under poor lighting. Order the Peak measuring loupe directly via Metav Werkzeuge or consult our advisors for technical guidance. Peak MS905.138 Measuring Loupe — 7× Magnification with Illumination and Achromatic Optics The Peak measuring loupe MS905.138 is a compact, illuminated inspection loupe designed to support precise measurement and visual checks in quality control and workshop environments. 7× magnification for fine detail Achromatic lens minimises colour fringing Integrated illumination, uses 2× Type C batteries Accurate optics that improve inspection outcomes The loupe’s achromatic lens corrects for chromatic aberration, producing a sharper, truer image than simple single-element lenses; this reduces judgement error when comparing marks, printed circuits or fine surface defects. With 7× magnification, small features become legible without excessive distortion, enabling faster assessment cycles and more reliable dimensional comparisons. The combination of corrected optics and consistent magnification promotes repeatable results during incoming inspection and routine quality checks. Illuminated viewing for consistent, efficient work Integrated lighting ensures an even, shadow-free view of the inspection area, making measurements and defect detection possible under workshop lighting conditions. The light source is battery powered — 2× Type C (not included) — which keeps the loupe portable and ready at any workstation without reliance on mains power. The clear field of view Ø22 mm balances magnified detail with sufficient context, so operators can both inspect features closely and maintain spatial orientation on the workpiece. Design and handling built for daily use Compact dimensions Ø36 × 58 × 175 mm make the loupe easy to position and manoeuvre in confined inspection zones. The unit’s form factor supports handheld operation or temporary mounting on inspection rigs when required, improving ergonomics and reducing fatigue during repetitive tasks. Durable construction suited to shop-floor use ensures that the optics remain aligned and ready for production environments where speed and reliability matter. Practical benefits for workshops and quality teams Small and focused, this inspection device accelerates decision-making by delivering a clear visual basis for accept/reject choices and measurement verification. The illuminated, achromatic optics reduce the time spent re-checking suspicious parts and minimise false positives caused by poor contrast or colour fringing. For procurement and quality managers looking to standardise inspection kits, the loupe provides a compact, low-maintenance option that complements calipers and other hand tools used on the bench. Contact Metav Werkzeuge for advice on integrating the Peak MS905.138 into inspection workflows or to request procurement information — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: MS905.138 Product name: Peak measuring loupe, illuminated, 7× Specifications Magnification: 7× Field of view: Ø22 mm Dimensions: Ø36 × 58 × 175 mm Power: 2× Type C batteries (not included) Lens type: Achromatic Materials & Features Brand: Peak Category: Optics Illuminated version Compact inspection loupe FAQ What magnification does this loupe provide? The loupe offers 7× magnification, which is suitable for close visual inspection and small-feature verification with the Peak MS905.138. Is the lens corrected for colour fringing? Yes. The achromatic lens in the Peak MS905.138 reduces chromatic aberration to give a clearer, more accurate image during inspections. How is the loupe powered? The illuminated version is battery operated and requires 2× Type C batteries, which are not included. What is the diameter of the viewing area? The device provides a field of view of Ø22 mm, enabling inspection of small details while keeping sufficient context. Is the loupe suitable for workshop use? Designed for durability and portability, the Peak MS905.138 is well suited to shop-floor inspection and quality-control stations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Taking advantage of 7× magnification and an achromatic lens delivers clearer visual measurement and reduced inspection time; combined with a compact Ø26 mm field of view and a 0–20 mm measuring range with 0.1 mm scaling, this loupe supports reliable workshop and quality‑control checks — order directly via Metav Werkzeuge or contact our consultants for technical clarification. Peak MS905.140 Measuring Loupe — 7× achromatic lens, Ø26 mm field of view The Peak MS905.140 Measuring Loupe is a compact inspection loupe designed for precise visual measurement and routine quality checks in workshops and inspection stations. 7× magnification for clear component inspection Achromatic lens reduces colour fringing Measuring range 0–20 mm with 0.1 mm scale Faster, measurable inspection for production control With 7× magnification and a 0–20 mm measuring range, this loupe is engineered to make routine checks faster and more consistent. The integrated 0.1 mm scale enables immediate reading of small features without auxiliary gauges, which reduces throughput delays caused by repeated measurements. In production runs where cycle time and reproducibility matter, the instrument supports decision‑making with visual data that are repeatable and verifiable, helping to reduce rework rates and maintain process stability. Optical clarity that improves measurement certainty The achromatic lens corrects for chromatic aberration, so edges and fine details appear sharply without coloured fringing. A clear image means less doubt when aligning the scale with a feature, directly lowering measurement uncertainty. The generous Ø26 mm field of view allows comfortable observation of components and templates at once, aiding rapid comparison and inspection. For customers transitioning from simple magnifiers, the corrected optics provide an immediate upgrade in visual quality and confidence. Compact, durable design for shop‑floor routines At Ø36 x 62 mm, the loupe is compact enough for handheld use and for keeping at inspection benches. It includes a standard measurement template, enabling quick reference checks without additional tooling. The small footprint and simple handling make the instrument suitable for multiple settings: bench inspection, incoming goods control, and fine‑work visual verification. Because the device is purely optical, it requires no power and is ready to use at any workstation, streamlining routine checks across shifts. Save time with straightforward handling and clear results Quick alignment, instant readings and a corrected optical system combine to reduce hesitation and improve throughput during inspection tasks. The loupe’s features are aimed at pragmatic benefits: faster decision cycles, fewer unnecessary measurements and clearer documentation of non‑conformances. If traceable photographic records are required, the clear, fringing‑free view simplifies visual communication between operators and quality engineers and supports consistent audit evidence. For availability, ordering or technical assistance from Metav Werkzeuge — including stock information and delivery to European workshops — please contact info@metav-werkzeuge.com or call +49 2822 7131930; the Peak MS905.140 can be dispatched promptly from Emmerich. Technical Data Article number: MS905.140 Name: Peak Measuring loupe with standard template, 7× Brand: Peak Specifications Magnification: 7× Measuring range: 0–20 mm Scale: 0.1 mm Field of view: Ø26 mm Dimensions: Ø36 x 62 mm Features Achromatic lens (reduced chromatic aberration) Includes standard measurement template Category: Optics Image asset available (thumbnail) FAQ What magnification does the loupe provide? The Peak MS905.140 provides 7× magnification for detailed component inspection. What measuring range and scale are available? Measuring range is 0–20 mm with a 0.1 mm scale for straightforward readings. Does the lens correct for chromatic aberration? Yes — the achromatic lens in the MS905.140 reduces colour fringing and sharpens edge definition for clearer measurements. Is the loupe suitable for workshop and incoming‑goods inspection? Yes — the compact design and included standard template make it suitable for bench inspection, incoming goods checks and routine quality control. Is an image or product thumbnail available for reference? An image asset and thumbnail are available for visual reference and catalogue use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from distortion‑free telecentric imaging combined with precise 7× magnification and a 0.1 mm scale for consistent inspections across a 0–20 mm range. Order the instrument directly via Metav Werkzeuge or consult our specialists for application guidance. Peak telecentric loupe MS905.136 — 7× magnification, telecentric optics The Peak telecentric loupe MS905.136 is a compact inspection instrument designed for distortion‑free optical measurement and repeatable visual checks in quality control and bench inspection tasks. Telecentric optics for distortion‑free measurement 7× magnification for detailed inspection Ø24 mm field of view for component overview High‑precision imaging for reliable decisions The telecentric design provides distortion‑free images so linear dimensions can be compared visually without perspective error; this is particularly important for small parts where edge position matters. With 7× magnification and a readable 0.1 mm scale, the loupe supports fast go/no‑go assessments and helps reduce rework rates. The optical arrangement keeps measurement geometry consistent across the frame, enabling clearer pass/fail judgements on tiny features. Efficient inspection across a practical working range A Ø24 mm field of view gives a balanced overview of most small components while the optical measuring range 0–20 mm covers common part heights and step measurements on precision parts. The included standard template simplifies repeatable checks and standardises visual inspection routines, which accelerates throughput on the shop floor and reduces reliance on multiple gauges for quick checks. Compact format that suits busy benches At Ø38 x 74 mm, the unit is compact enough for bench mounting or inclusion in a visual inspection station without occupying excessive space. The compact footprint supports quick placement and repositioning, meaning inspection cycles become faster and more predictable. Robust optical construction and simple mechanical dimensions aid integration into existing workflows and visual quality control stations. Practical handling and support for integration The instrument is straightforward to use for routine inspections and visual verification tasks; clear markings and a wide field assist operators with limited optical training. For specification clarifications or to confirm suitability for a particular process, technical advice is available from Metav Werkzeuge — ensuring correct selection and rapid deployment. This combination of repeatability, clarity and support minimises downtime and improves yield consistency. Speak with Metav Werkzeuge for tailored measurement advice on the Peak telecentric loupe MS905.136, arrange procurement or technical consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: MS905.136 Name: Peak telecentric loupe MS905.136 Brand: Peak Category: Optics Key figures Magnification: 7× Field of view: Ø24 mm Scale: 0.1 mm Measuring range: 0–20 mm Dimensions: Ø38 x 74 mm Features & accessories Telecentric optics Standard template included Compact bench inspection format FAQ What level of magnification does the loupe provide? The Peak telecentric loupe MS905.136 offers 7× magnification, enabling detailed visual inspection and clearer assessment of small features. Which measuring range is suitable for routine checks? The instrument covers a measuring range of 0–20 mm, which is suitable for typical component heights and step measurements in precision workshops. How wide is the visible inspection area? A Ø24 mm field of view provides a balanced overview for most small parts, supporting quick visual comparisons and alignment checks. Is any accessory included to support repeatable checks? Yes, the loupe is supplied with a standard template to help standardise inspections and reduce variability between operators. Can this loupe eliminate perspective distortion during measurement? The telecentric optics minimise perspective error, delivering distortion‑free imaging that supports more reliable visual measurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Peak Schablonenmikroskop — Messmikroskop Das Peak Schablonenmikroskop bietet optische Präzision für feine Messaufgaben in Werkstatt und Labor und eignet sich besonders für die schnelle Kontrolle von Schablonen, Prägeteilen und feinen Bauteilen Peak Schablonenmikroskop »MS905.258« 100x Vergrößerung Sichtfeld Ø0,84 für präzise Detailbeobachtung Skalierung 0,005 für exakte Messungen Messbereich 0–0,8 für feine Messaufgaben Abnehmbarer Gummi-Augenaufsatz für Komfort Präzision und Messleistung für den Arbeitsalltag Das Mikroskop ist auf wiederholbare Messungen ausgelegt und kombiniert eine 100x Vergrößerung mit feiner Skalierung. Dadurch lassen sich Konturen und Kanten von Schablonen sowie feine Strukturen schnell beurteilen und quantifizieren. Die Skalierung 0,005 ermöglicht feine Ablesungen, die den Prüfvorgang beschleunigen und Nacharbeit reduzieren. Anwender profitieren von einer klaren Visualisierung, die Routinekontrollen messbar sicherer macht. Ergonomie und Komfort bei längeren Prüfzyklen Mit einem abnehmbaren Gummi-Augenaufsatz ist das Gerät für wechselnde Anwender angenehm nutzbar und reduziert Ermüdungserscheinungen bei längeren Prüfungen. Das moderate Arbeitsabstand von 11,6 unterstützt eine sichere Handhabung von Mustern und Schablonen, ohne die Sicht zu beeinträchtigen. Der komfortable Augenaufsatz erleichtert dabei das Fokussieren und trägt zur konstanten Prüfroutine bei. Einsatzbereiche und Zielgruppe Dieses optische Messgerät richtet sich an Werkstätten, Qualitätssicherung und Ausbildung, in denen schnelle und zuverlässige Sichtprüfungen erforderlich sind. Durch den Messbereich 0–0,8 ist es ideal für sehr kleine Toleranzen und filigrane Teile. Das Gerät eignet sich besonders für Anwender, die wiederholbare Prüfprozesse mit geringem Aufwand implementieren wollen, ohne auf Präzision zu verzichten. Robustheit und Handhabung Die kompakte Abmessung Ø41,5x122 macht das Gerät vielseitig einsetzbar auf Prüfplätzen mit begrenztem Platzangebot. Die Kombination aus klarem Sichtfeld Ø0,84 und präziser Skalierung unterstützt schnelle Prüfzyklen. Der mitgelieferte Kasten sorgt für sichere Aufbewahrung und einfachen Transport zwischen verschiedenen Arbeitsplätzen. Empfehlung: Das Peak Schablonenmikroskop für zuverlässige 100x-Messungen direkt über Metav Werkzeuge anfragen — Beratung und Bestellung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: MS905.258 Marke: Peak Bezeichnung: Peak Schablonenmikroskop 100x Fakten Vergrößerung: 100x Skalierung: 0,005 Messbereich: 0–0,8 Messbereich Min: 0 Messbereich Max: 0.8 Arbeitsabstand: 11,6 Abmessung: Ø41,5x122 Sichtfeld: Ø0,84 Besonderheiten Kasten: ja Mit abnehmbarem Gummi-Augenaufsatz FAQ Wie genau lässt sich mit dem Peak Schablonenmikroskop messen? Das Peak Schablonenmikroskop verfügt über eine Skalierung 0,005, die eine sehr feine Ablesung erlaubt und somit eine hohe Messgenauigkeit für feine Bauteile und Schablonen sicherstellt. Für welche Bauteile ist das Mikroskop besonders geeignet? Das Mikroskop ist ideal für kleine, filigrane Bauteile mit engen Toleranzen; der Messbereich von 0–0,8 eignet sich besonders für Prägeteile, Schablonen und feine Messaufgaben. Wie unterstützt der Gummi-Augenaufsatz die Arbeit? Der abnehmbare Gummi-Augenaufsatz erhöht den Anwenderkomfort und reduziert Blendung und Ermüdung bei längeren Prüfroutinen, was zu zuverlässigeren Ergebnissen mit dem Peak Schablonenmikroskop führt. Kann das Gerät mobil im Betrieb eingesetzt werden? Ja, die kompakte Abmessung Ø41,5x122 und der mitgelieferte Kasten ermöglichen einfachen Transport und sicheren Einsatz an verschiedenen Prüfständen. Ist das Sichtfeld ausreichend für Detailprüfungen? Das Sichtfeld Ø0,84 bietet eine gute Balance aus Feldbreite und Detailauflösung, sodass feine Strukturen und Kanten sicher erkannt und bewertet werden können. Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise visual measurement with 25x magnification and a fine 0.05 mm scale for quick, reliable checks on small components; the compact diameter and Ø3.3 mm field of view make the instrument suitable for tight bench spaces. Order the Peak Template Microscope MS905.249 directly via Metav Werkzeuge or ask the consultants for application advice. Peak Template Microscope MS905.249 — 25x inspection microscope with removable rubber eyecup Peak Template Microscope MS905.249 is a compact measuring microscope designed for visual inspection and simple dimensional checks of small parts in production and quality control environments. 25x magnification for clear detail Measuring scale 0.05 mm Measuring range 0–3 mm Removable rubber eyecup for comfort Accurate small-scale measurement that speeds decision-making The instrument delivers 25x magnification combined with a calibrated 0.05 mm scale, enabling precise measurement within a 0–3 mm range. The small Ø3.3 mm field of view concentrates on the inspected area, which aids in identifying fine defects or dimensional deviations quickly. For operators unfamiliar with micrometre-level scales, the marked graduations translate directly to tangible reductions in inspection time: one division corresponds to 0.05 mm, so routine comparisons and pass/fail assessments become straightforward and repeatable. Designed for repeatability and operator comfort A removable rubber eyecup enhances comfort during extended inspection periods and can be cleaned or replaced to maintain consistent observation conditions. The working distance of 17 mm ensures a practical clearance for examining small assemblies without contact, while the compact external dimensions Ø41.5×122 mm keep the instrument unobtrusive on crowded benches. Together, these design choices reduce operator fatigue and support consistent alignment between successive inspections, improving throughput and lowering the likelihood of measurement errors. Integrates into inspection workflows with minimal disruption The compact footprint and direct visual scale make the microscope suitable for inline quality checks, lab benches or small assembly stations where space is limited. Because the scale is readable at a glance, inspection cycles are shortened, enabling faster decisions and fewer production interruptions. The combination of optical clarity and a concise measuring range makes this device particularly useful for electronics, fine mechanical components and prototype verification where rapid, localised inspection is required. Practical features for everyday metrology Cleaning and maintenance are uncomplicated thanks to the detachable eyecup, and the straightforward optical setup avoids lengthy calibration routines for routine checks. The instrument’s construction focuses on delivering practical measurement capability rather than complex electronics, which supports reliable operation in busy workshop settings. As a compact visual metrology tool from Peak, the MS905.249 offers a balance of clarity, simple measurement functionality and ergonomic detail that suits quality control and workshop environments. For straightforward integration into inspection workflows, contact Metav Werkzeuge to discuss the Peak MS905.249 and arrange delivery from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: MS905.249 Name: Peak Template Microscope Brand: Peak Category: Optik Facts Magnification: 25x Scale: 0.05 mm Measuring range: 0–3 mm Field of view: Ø3.3 mm Working distance: 17 mm Dimensions: Ø41.5×122 mm Special features Removable rubber eyecup Compact design for bench use Suitable for visual inspection and simple measurement FAQ What is the smallest increment readable on the scale? The scale on the Peak Template Microscope MS905.249 is graduated in 0.05 mm increments, allowing clear estimation of small dimensional differences within the 0–3 mm range. Can the eyecup be cleaned or replaced? Yes, the removable rubber eyecup can be detached for cleaning or replacement to maintain optical comfort and hygiene during extended use of the Peak MS905.249 inspection microscope. Which types of components suit this microscope? The instrument is optimised for small, detailed parts such as electronic components, fine mechanical parts and prototype pieces where visual inspection and short-range measurement are required. What are the optical working parameters to consider when setting up? Key parameters are the 25x magnification, Ø3.3 mm field of view and working distance 17 mm, which together determine the inspection area and the clearance needed above the specimen. Is this microscope intended for complex dimensional measurement tasks? The MS905.249 is designed for rapid visual checks and simple dimensional comparison within a 0–3 mm range rather than for high-precision metrology requiring digital readouts or long-range measurement systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise visual inspection and reliable measurement in a compact package: the integrated 50× magnification, fine 0.02 mm scale and a removable rubber eyecup ensure repeatable results and comfortable use in production and quality control. Order via Metav Werkzeuge for dependable supply and expert advice. Peak template microscope — workshop template microscope with compact design and precise optics The Peak template microscope serves as a compact visual inspection and simple dimensional-checking instrument suitable for workshop benches and production inspection stations. 50× magnification for fine detail Field of view Ø2.0 mm for targeted inspection Scale 0.02 mm for precise comparison Removable rubber eyecup for comfort and hygiene Precision optics that speed up inspection The instrument combines 50× magnification with a defined Ø2.0 mm field of view to make small features clearly visible while reducing the need for repeated repositioning. The calibrated 0.02 mm scale enables straightforward comparative measurements directly in the eyepiece, which speeds up routine checks and supports consistent quality control procedures. By focusing on measurable benefits — faster decision-making and fewer reject parts — the optical package improves throughput without complex setup. Designed for reliable measurements in compact spaces With a working distance of 11.7 mm and compact external dimensions (Ø41.5 × 122 mm), the device is easy to position at a workbench or inspection fixture. The measured range 0–1.6 mm suits template verification and small-part inspection tasks common in toolmaking and assembly. The compact form factor minimises workspace footprint while maintaining optical clarity, making it suitable for both shop-floor stations and light-duty inspection benches. Practical handling and operator comfort Ergonomic considerations are addressed by the removable rubber eyecup, which improves eye alignment and blocks stray light for more reliable observation; it can be removed for cleaning or for use with spectacles. The simple optical design reduces training requirements and allows staff to perform rapid checks with minimal setup. Durability-focused choices keep maintenance needs low, supporting continuous operation in busy production environments. Clear, verifiable specifications for easier procurement Key numerical values such as scaling 0.02 mm, the visible measurement range of 0–1.6 mm, and the working distance of 11.7 mm provide a verifiable basis for purchase decisions and make it straightforward to compare this instrument with alternative microscopes and measuring devices. The supplied technical data support integration into existing inspection routines and documentation for quality systems. Contact Metav Werkzeuge to discuss how the Peak template microscope can fit specific measurement tasks or to request delivery from our Emmerich stock — email info@metav-werkzeuge.com or call +49 2822 7131930 for personalised guidance Technical data Article number: MS905.250 Brand: Peak Product: Peak template microscope Facts Magnification: 50× Field of view: Ø2.0 mm Scale / scaling: 0.02 mm Measurement range: 0–1.6 mm Working distance: 11.7 mm Dimensions: Ø41.5 × 122 mm SKU: MS905.250 Special features Removable rubber eyecup Category: Optics Compact design suitable for workshop inspection FAQ How accurate are comparative measurements with this microscope? Comparative readings with the Peak template microscope use the integrated 0.02 mm scale; this provides repeatable visual comparison suitable for template checks and small-part inspection within the stated 0–1.6 mm range. Can the eyecup be removed for cleaning or use with spectacles? Yes, the eyecup on the Peak template microscope is removable to allow hygiene cleaning or comfortable use with spectacles. What kind of tasks is this microscope best suited for? The instrument is intended for close visual inspection, template verification and small-feature checks on the shop floor where a compact optical solution with simple comparative measuring is required. Is the working distance sufficient for using small fixtures or templates? The stated working distance of 11.7 mm allows use with thin templates and small fixtures commonly employed in quality control and assembly checks. Which product ID should be quoted when ordering or enquiring? Please refer to Article number MS905.250 and the product designation Peak template microscope when contacting sales or technical staff. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise optical inspection, compact handling and clear scaling for reliable small-part measurement; order directly via Metav Werkzeuge or consult our specialists for tailored advice. Peak template microscope MS905.251 — 75× optical inspection with 0.01 mm scale The Peak template microscope MS905.251 is a compact optical inspection device designed for high-detail measurement and comparison tasks in workshops and quality control stations. 75× magnification for fine detail 0.01 mm scale resolution for repeatable reads 0–1 mm measuring range for small components Removable rubber eyecup for flexible observation Compact Ø41.5 × 122 mm footprint for tight benches High-precision inspection that speeds decision-making With 75× magnification and a 0.01 mm scale, the instrument delivers the visual enlargement and graduations needed to judge features under one millimetre quickly and reliably. The combination of a defined 0–1 mm measuring range and a clear scale reduces interpretation time during routine checks and first-article inspections. For users working with fine tolerances, the optical setup gives a direct visual comparison to templates and reference marks, enabling immediate go/no-go decisions and fewer measurement cycles. Comfortable observation and practical ergonomics A working distance of 11.7 mm and a Ø1.1 mm field of view strike a balance between magnification and usability, allowing clear focus on small details without excessive operator strain. The removable rubber eyecup increases comfort during extended use and can be detached when external illumination or camera adapters are used. The narrow body (Ø41.5 × 122 mm) means the unit fits easily into crowded inspection areas, while the compact format supports fast positioning over samples and simple hand-held alignment where bench mounting is not possible. Built for workshop workflows and repeatable results Designed to integrate into routine inspection workflows, this optical device helps reduce rework by making defect detection and template comparison more straightforward. The precise scaling and optical clarity support traceable checks during assembly, maintenance or incoming goods inspection. Combined with the practicality of a small footprint, the unit is suitable for quality technicians, toolmakers and laboratory assistants who require dependable visual measurement on a daily basis. For specialist requirements, technical clarification is available to ensure the instrument matches specific inspection tasks. For procurement or technical advice regarding the Peak template microscope MS905.251, please contact Metav Werkzeuge for expert guidance and reliable delivery from Emmerich. Technical data Article number: MS905.251 Brand: Peak Product: Template microscope 75× Core specifications Magnification: 75× Scale resolution: 0.01 mm Measuring range: 0–1 mm Field of view: Ø1.1 mm Working distance: 11.7 mm Dimensions: Ø41.5 × 122 mm Features & versions Removable rubber eyecup Category: Optics Suitable for optical inspection tasks FAQ What level of detail can be inspected with this microscope? The Peak template microscope MS905.251 provides 75× magnification and a 0.01 mm scale, enabling visual inspection and comparison of features within the 0–1 mm range. Is the eyecup adjustable or removable for different users? Yes, the unit includes a removable rubber eyecup that can be taken off for alternate viewing setups or when using camera adapters. Can this device be used for routine incoming goods checks? The compact format and clear scale make the MS905.251 suited to incoming inspection and routine quality-control tasks where small-feature visibility is required. How large is the visible field at full magnification? At the specified magnification the visible field is approximately Ø1.1 mm, which supports focused inspection of small components and template comparisons. Will the microscope fit into a crowded inspection bench or carrier? The narrow body (Ø41.5 × 122 mm) is designed for tight workspaces and allows straightforward placement in compact inspection areas. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact inspection tool that combines 5x magnification, a Ø30 mm field of view and a secure magnetic attachment for faster quality checks and reduced handling time. Order the loupe directly via Metav Werkzeuge or consult the team for application advice. Peak Loupe MS905.210 — 5x Magnetic Inspection Loupe with Ø30 mm Field of View The Peak Loupe MS905.210 is a compact inspection loupe designed for quick visual checks in workshops and quality-control workstations, combining clear magnification with magnetic mounting for effortless positioning. 5x magnification for precise inspection Secure magnetic attachment with two magnets Compact Ø44 x 20 x 30 design for tight spaces Faster, more reliable visual checks for routine inspection The combination of 5x magnification and a Ø30 mm field of view delivers a balance between detail and context, enabling concise evaluation of solder joints, surface defects and component markings without constant refocusing. The loupe’s optical power is chosen to reveal fine details while keeping the inspected area sufficiently large to assess surroundings. In practical terms, this reduces inspection time per item and supports consistent visual quality control in repetitive production tasks, making light‑duty inspection more efficient. Magnetic mounting that frees both hands and improves workflow A key advantage of this model is its magnetic mounting: two small magnets allow secure temporary attachment to ferrous fixtures and workbenches. This feature enables hands‑free inspection when paired with a ferrous jig or metal fixture, improving ergonomics and reducing the need to hold the loupe during delicate work. The compact design also means it can be positioned in tight spaces or stored on a bench magnet rail, keeping work areas organised and minimising interruptions during small‑part assembly or finishing operations. Built for workshop use and simple integration into existing stations The loupe’s small footprint (Ø44 x 20 x 30) and low weight make it easy to add to existing inspection stations without major changes. The optical element is suited for general workshop applications where high portability and quick checks are priorities. Care is straightforward: wipe lenses with a lint‑free cloth and mild cleaner as required to maintain a clear field of view. For teams that need an affordable, durable magnifier for routine checks, this tool offers practical benefits with minimal maintenance overhead. Contact Metav Werkzeuge for stocking details and tailored advice on integrating the Peak Loupe MS905.210 into inspection stations at your facility Technical data Article number: MS905.210 Manufacturer: Peak Name: Peak Loupe 5x, magnetic Facts Dimensions: Ø44x20x30 Field of view: Ø30 Magnification: 5x Special features with two small magnets for a secure attachment Category: Optics Asset image: MS905210-main.jpg FAQ What magnification does this loupe provide? The Peak Loupe MS905.210 provides 5x magnification, suitable for detailed visual inspection while maintaining a useful viewing area. How large is the viewing area? The loupe offers a Ø30 mm field of view, which balances detail and context for common workshop checks. Is the loupe suitable for hands‑free use? Yes — the loupe includes two small magnets for secure attachment to ferrous surfaces, enabling hands‑free inspection when used with appropriate metal fixtures. Can this loupe be used for electronic component inspection? The optical power and viewing area make the loupe suitable for many electronic and small‑part inspections where moderate magnification and a clear overview are needed. How should the loupe be cleaned? Clean the lens with a soft, lint‑free cloth and a mild optical cleaner; avoid abrasive materials to preserve the optical surface. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise visual inspections with the 8–16x magnification, a 0.1 mm scale and an integrated grid and template for repeatable measurements — ideal for quality control and fine assembly tasks. Order this loupe directly via Metav Werkzeuge or consult our specialists for application advice. Peak Zoom Loupe 8–16x — optical inspection loupe with integrated measuring scale the Peak Zoom Loupe 8–16x provides variable magnification and a built-in measuring scale for detailed inspection and quick on-the-bench checks in workshops and inspection stations 8–16x variable magnification Measurement range 0–16 mm Scale increments 0.1 mm Adjustable dioptre +2.5 D to −5 D Accurate visual measurement for repeatable results The loupe combines variable magnification (8–16x) with a precise 0.1 mm scale, enabling controlled inspection of small features and rapid comparative measurement. The effective measurement range 0–16 mm and a compact field of view (Ø20–10 mm depending on zoom) make the instrument suitable for checking component edges, surface defects and printed markings. The numeric scale lets operators read small deviations without transferring parts to a bench microscope, speeding up throughput and reducing handling errors while maintaining documented traceability. Comfortable, adjustable optics reduce inspection time An integrated dioptre adjustment from +2.5 D to −5 D adapts the loupe to different eyesight conditions, lowering eye strain during longer inspection runs. The device’s compact dimensions (Ø45 x 65 mm) and clear optical path support ergonomic handling at assembly benches or inspection stations. The included grid and template simplify alignment and visual comparison, allowing repeatable placement of sample parts and faster pass/fail decisions without complex fixtures. Practical for workshop and quality assurance routines Designed for everyday use in production and quality environments, the loupe supports consistent visual checks and quick documentation. The robust optical zoom and measurable field enable straightforward defect identification and sizing on small components. Supplied information such as magnification range and scale allows integration into quality processes and inspection sheets. The product is listed as SKU MS905.197, making it easy to reference in orders and inventory systems. For precise, repeatable inspections order the Peak Zoom Loupe MS905.197 via Metav Werkzeuge or contact our Emmerich team for guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: MS905.197 Manufacturer: Peak Product name: Peak Zoom Loupe 8–16x Facts Magnification: 8–16x Scale: 0.1 mm Measurement range: 0–16 mm Field of view: Ø20–10 mm Dioptre adjustment: +2.5 D to −5 D Dimensions: Ø45 x 65 mm Special features With grid and template Category: Optics SKU: MS905.197 FAQ How accurate are measurements taken with this loupe? Measurements use the built-in 0.1 mm scale; the loupe provides reliable, quick visual sizing suitable for routine inspection and comparative checks with the Peak Zoom Loupe MS905.197. Can the magnification be adjusted while inspecting a part? Yes, the zoom range of 8–16x allows continuous adjustment to focus on different feature sizes during inspection without changing instruments. Is the loupe suitable for users who wear glasses? The dioptre adjustment (+2.5 D to −5 D) allows personal visual correction, so the instrument can be adapted for use with many eyesight conditions when using the Peak Zoom Loupe. What is the effective field of view at different magnifications? The visual field ranges approximately from Ø20 mm to Ø10 mm depending on the selected magnification, providing a balance between overview and detail. How should the product be referenced in inventory or orders? Use the SKU MS905.197 and the designation Peak Zoom Loupe 8–16x for clear identification in purchase orders and stock lists. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of precise optical adjustment and straightforward compatibility to improve inspection speed and repeatability; the 0.5× magnification and Ø48 mounting deliver a broader field of view with stable installation. Order the attachment lens directly via Metav Werkzeuge or contact the consultants for application advice. Attachment Lens M503.242.1 – 0.5× Auxiliary Optic for Stereo Microscopes (Ø48) The attachment lens M503.242.1 is an auxiliary optic designed to alter the effective magnification of stereo microscopes for wider observation fields in industrial and laboratory inspection settings. 0.5× magnification for wider field of view Fits Ø48 mounting on stereo microscopes Model W0.5 for consistent optical matching Metav IndustryLine quality assurance Greater overview with controlled magnification The 0.5× specification reduces the effective magnification while increasing the field of view, enabling operators to inspect larger areas without changing objectives or repositioning samples. This adjustment translates into fewer stage movements and faster throughput during routine visual checks, which is particularly advantageous in quality control and incoming inspection. By providing a predictable optical change, the accessory supports reproducible visual assessments and simplifies documentation of findings. Seamless compatibility and straightforward mounting Designed for Ø48 mounting interfaces, the accessory—specified as W0.5—matches common stereo microscope optical trains and mechanical mounts. The attachment integrates with existing stereo microscope setups, preserving parcentricity and focus range when correctly coupled, so alignment work is kept to a minimum. This compatibility reduces setup time in production environments and helps maintain consistent imaging geometry across inspection tasks with different magnifications. Stable construction for reliable handling Mechanical stability is essential when enlarging the observed area; a steady optical assembly reduces perceived vibration and improves image steadiness. The accessory's build provides the necessary support for routine use in inspection benches and laboratory workstations, with weight: 6.15 kg recorded in the technical specification for completeness. Stable optics contribute to repeatable measurements and reduce operator fatigue during longer inspection sessions, which in turn supports consistent quality outcomes. Practical gains for inspection workflows Introducing a dedicated auxiliary lens accelerates decision-making by offering a broader situational view while retaining sufficient detail for many assembly and inspection tasks. The accessory is well suited to applications where overview and context are as important as detail—for example, solder-joint inspection, component orientation checks, and initial defect screening. Backed by Metav IndustryLine selection criteria, the optic is an effective tool for workshops and small labs seeking to raise inspection efficiency without complex system changes. Select the Metav IndustryLine attachment lens for dependable optical adaptation and contact Metav Werkzeuge for application guidance or to place an order: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: M503.242.1 GTIN: 4054469145198 Type: W0.5 Diameter: Ø48 Customs tariff no.: 90119090 Weight: 6.15 kg Core specifications Magnification: 0.5× Mount diameter: Ø48 Model designation: M503.242.1 Special features Attachment lens for stereo microscopes Designed to increase field of view while altering magnification Category: Optik Suitable for: ZS0745 Brand: Metav IndustryLine FAQ What change in magnification does this accessory provide? The accessory adjusts the optical system by 0.5×, giving a noticeably wider field of view while reducing the effective magnification for broader inspection coverage. Will this fit common stereo microscope mounts? Yes, the unit is specified for Ø48 mounting and is compatible with stereo microscopes that accept Ø48 auxiliary optics; the model is identified as W0.5 to aid selection. Can this lens be used for incoming inspection and assembly checks? The accessory is suitable for visual inspection workflows where a larger overview is required; it supports quicker assessments and reduces sample repositioning for routine checks. Does the lens affect image alignment or focus range? When properly mounted, the attachment preserves the optical geometry and focus range expected from a matched auxiliary optic, minimising additional alignment work. Is the accessory supplied ready for use or does it require adjustment? The unit is delivered as an optical attachment; correct mechanical coupling to the microscope and a brief check of centring and focus are recommended before formal inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combine precise 0.7× magnification, a compact W0.7 design and a Ø48 mounting diameter for reliable inspection and documentation workflows; the result is a practical attachment for broader fields of view and faster visual checks. Order the auxiliary lens directly via Metav Werkzeuge or ask our consultants if needed. Auxiliary lens W0.7 (0.7×) by Metav IndustryLine — Ø48 mount A compact auxiliary lens W0.7 designed to extend the magnification range of stereo microscopes and improve visual inspection and documentation without changing primary objectives 0.7× magnification factor for broader field Ø48 mm mounting diameter for common eyepieces Designed for stereo microscopes and documentation Compact W0.7 design preserves optical quality See more at once — faster inspections with lower magnification Fitting an 0.7× magnification attachment reduces the overall magnification and consequently increases the field of view, which is especially useful when moving from detailed examination to rapid component inspection. This optical compromise shortens inspection cycles by allowing larger areas to be assessed at once while maintaining sufficient detail for quality checks. The result is more efficient visual workflows and fewer objective changes during batch inspections, supporting higher throughput in routine microscopy tasks. Simple integration — fits standard mounts and keeps image quality The Ø48 mounting diameter provides a standard interface for many stereo microscope eyepieces and camera ports, enabling quick installation and removal without special adapters. Thanks to the W0.7 construction, the attachment preserves alignment and maintains image homogeneity across the field, so documentation with camera systems remains consistent. Compatibility with common microscope setups reduces downtime and simplifies equipment management in production and laboratory environments. Practical benefits for inspection and documentation routines As a compact optical attachment, this lens offers a straightforward way to adapt existing microscope setups for overview tasks, inspection of larger samples and pre‑selection before high‑magnification analysis. The combination of a reduced magnification factor and stable mounting leads to fewer objective swaps and smoother transitions between magnification levels. Supplied as part of the Metav IndustryLine portfolio, the unit supports reliable supply and traceable ordering across European workshops and labs. Choose the Metav IndustryLine W0.7 auxiliary lens for wider fields of view and contact Metav Werkzeuge in Emmerich for expert advice and dependable European supply Technical Data Article number: M503.242.2 GTIN: 4054469145204 Manufacturer: Metav IndustryLine Category: Optics Tariff number: 90119090 Facts Magnification: 0.7× Mounting diameter: Ø48 mm Type designation: W0.7 eClass: 27371231 Special features Compact auxiliary lens design Intended for stereo microscope applications SKU: M503.242.2 Story trigger: optik FAQ What magnification does this attachment provide? The auxiliary lens provides a 0.7× magnification factor, allowing a notably wider field of view than the primary objective. Will the lens fit my microscope? The unit uses an Ø48 mm mounting diameter, suitable for many stereo microscope eyepieces and camera ports; check physical mounting standards for exact compatibility. Can this lens be used for documentation with a camera? Yes, the optical construction preserves image homogeneity and is suitable for documentation and camera‑based inspection workflows when attached to compatible stereo microscopes. What is the model designation and SKU? The type designation is W0.7 and the SKU is M503.242.2, useful for ordering and stock checks. Is this part part of a wider product range? The lens is offered within the Metav IndustryLine optics range and is intended to complement existing stereo microscope configurations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the precise 1.5× magnification and compact Ø48 mounting to boost inspection accuracy without changing the existing optical train; the attachment delivers clearer detail at minimal setup effort. Order the attachment directly via Metav Werkzeuge or ask the consultants for integration advice. Attachment lens W1.5 — 1.5× magnification, Ø48 mount (Metav IndustryLine) The Attachment lens W1.5 increases the magnification of a stereo microscope by 1.5×, providing improved detail recognition for routine inspection and fine assembly tasks in laboratories and workshops. 1.5× magnification boost for stereo microscopes Ø48 compatible mount for standard eyepieces Lightweight optical glass for clear imaging Simple attachment, preserves working distance Faster, more reliable visual inspection for quality control The 1.5× magnification upgrade reduces reliance on repeated repositioning and rework by bringing small features into clearer view during the first pass. Integrated into a standard stereo microscope, this optical accessory extends visual resolution while maintaining the original optical axis, so measurement workflows and visual checks become more efficient. The result is higher throughput in inspection loops and fewer ambiguous findings during quality control. Designed for quick integration and steady handling Compatibility with a Ø48 mount means straightforward fitting to many common stereo microscope heads, allowing rapid retrofitting without optical overhaul. The W1.5 design keeps the working distance stable, retaining operator posture and tool clearance that are critical during soldering, micro-assembly or dissection tasks. Where system integration needs clarification, Metav IndustryLine provides specification guidance to ensure the attachment aligns with existing microscope configurations. Optical clarity that supports confident decisions Constructed to preserve contrast and minimise aberrations, the lens delivers a noticeably improved field of view at increased magnification, so small defects and fine structures are easier to evaluate. The enhanced image quality reduces eye strain and speeds decision-making for inspectors and technicians, turning visual checks into a more reliable stage of production and assembly. The accessory is therefore suited to electronics inspection, precision engineering and educational laboratories seeking consistent observational results. Practical applications and who benefits most Engineers, quality inspectors and lab technicians gain from the incremental magnification without adding complexity to their microscopes; the attachment is particularly useful for component inspection, entomology slides and detailed surface checks. Its compact form and standard mount make it a practical option where space and handling matter, enabling existing optical benches to deliver greater resolution with minimal additional training. Contact Metav Werkzeuge today to discuss how the W1.5 attachment (M503.242.3) can be integrated into existing microscope setups and to request technical advice from our specialists. Technical data SKU: M503.242.3 GTIN: 4054469145211 Manufacturer: Metav IndustryLine Key specifications Magnification: 1.5× Mount diameter: Ø48 Type: W1.5 Tariff code: 90119090 Features & compatibility Suitable for stereo microscope use Category: Optik Story trigger: optik FAQ What magnification increase does the lens provide? The attachment lens provides a 1.5× magnification increase, offering finer detail without replacing the microscope objective. Will the lens fit my existing microscope? The lens uses a Ø48 mount and is compatible with many stereo microscope heads; refer to the model specification or contact Metav Werkzeuge for confirmation. Does the attachment change the working distance? Designed as a W1.5 accessory, the lens maintains a stable working distance so handling and tool clearance remain largely unchanged during inspection. Is the product identified by a catalogue number? Yes, this accessory is listed as M503.242.3 (Metav IndustryLine). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefitting from a compact fit and clear optical performance, the 2.0× attachment lens delivers an immediate extension of inspection capability while preserving the ergonomic advantages of stereo optics; combine the 2.0× magnification with the Ø48 mounting to speed up visual checks and reduce objective changes. Order directly via Metav Werkzeuge or consult our specialists for compatibility advice. Attachment lens W2.0 – 2.0× optical accessory, Ø48 mount (Metav IndustryLine) The Attachment lens W2.0 is a precision optical accessory that increases the magnification of stereo microscopes by 2.0×, designed for use with Ø48 mm objective mounts and routine visual inspection tasks. 2.0× magnification factor Ø48 mm mount diameter Designed for stereo microscopes Compact optical enhancement Greater inspection reach without swapping objectives The 2.0× optical booster extends the usable magnification range of existing microscopes, enabling quicker transition between overview and detail inspection without frequent objective changes. By acting as an intermediate optical element, this attachment lens multiplies the effective magnification of the microscope’s objective while keeping the original optical axis and working distance largely intact. The result is a measurable gain in inspection throughput and fewer handling steps during quality control, which supports faster decision cycles on the shop floor. The compact Ø48 interface keeps the installation simple and repeatable. Practical compatibility and workflow advantages Engineered for integration with standard stereo systems, the W2.0 attachment lens fits into common optical trains and preserves the microscope’s ergonomic layout. This accessory is particularly useful where rapid alternation between magnification levels is required—inspection benches, incoming goods control and assembly verification benefit from the doubled visual resolution. The accessory’s construction supports stable alignment, which reduces adjustment time and ensures reproducible views across multiple operators. For specific system compatibility and to verify mechanical fit, Metav Werkzeuge can provide application guidance and parts matching. Confidence through tested optics and trusted supply The optical design focuses on delivering clear, contrast-rich images for routine and precision inspection alike, helping to avoid misinterpretation of small features. Supplied by Metav IndustryLine and distributed from Emmerich, this attachment lens is part of a range that embodies Metav’s commitment to making precision accessible: a broad product spectrum, a rigorous quality filter and dependable logistics for industry and trade. The combination of a defined magnification gain and a standard Ø48 mount offers a practical, low-risk upgrade path for laboratories and workshops seeking improved visual performance without major system overhaul. Request tailored compatibility advice from Metav Werkzeuge for the W2.0 attachment lens and secure prompt delivery from Emmerich — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M503.242.4 GTIN: 4054469145228 Customs tariff number: 90119090 Data Magnification: 2.0× Mount diameter: Ø48 mm Weight: 6.15 kg Type designation: W2.0 Special features Category: Optik Suitable for: stereo microscopes SKU: M503.242.4 FAQ How does the attachment lens affect the microscope’s magnification? The attachment lens multiplies the microscope objective’s magnification by 2.0×, turning an existing magnification into twice its value without replacing objectives. Will the lens fit my stereo microscope? Compatibility depends on the objective mount; the accessory uses an Ø48 mm interface common to many stereo systems. Metav Werkzeuge can confirm fitment for specific microscope models. Does the W2.0 attachment lens change the working distance? Introducing an attachment element can alter the effective working distance slightly; the design of the W2.0 aims to preserve practical working distances for inspection tasks, minimising adjustments needed. Is the accessory suitable for laboratory and workshop use? Yes. The optical booster is designed for routine inspection and laboratory visual checks, improving detail recognition while remaining straightforward to integrate into established workflows. What identification numbers are available for ordering and inventory? The product is listed under SKU M503.242.4 and GTIN 4054469145228 for ordering and inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from distortion-free measurement with a 7x magnification and an anastigmatic lens, combined with a compact Ø55×53 mm format and an ample Ø41 mm field of view for efficient film inspection; order the loupe directly via Metav Werkzeuge or consult our specialists for tailored advice. Peak measuring loupe MS905.400 — 7x anastigmatic lens, compact Ø55×53 mm The Peak measuring loupe MS905.400 is a compact 7x inspection instrument designed for precise measurements and the visual inspection of photographic film in optical and workshop settings. 7x magnification for precise inspection Anastigmatic lens for distortion-free image Ø41 mm field of view for larger coverage Scale 0.1 mm with 0–36 mm measuring range Precision optics that deliver repeatable measurement results The combination of 7x magnification and an anastigmatic lens ensures a sharp, distortion-free image across the viewing area, which directly improves repeatability in routine checks. The loupe’s 0.1 mm scale and 0–36 mm measuring range allow for reliable readings on small features and film edges; the Ø41 mm field of view reduces the need for frequent repositioning during inspection. For users unfamiliar with the term, an anastigmatic lens corrects spherical and chromatic aberrations so that straight edges and fine details appear true to form — a practical advantage when comparing measurements against drawings or tolerances. Compact design that speeds up inspection workflows A compact Ø55×53 mm footprint makes this inspection loupe easy to manoeuvre and quick to position over samples, which supports faster throughput in quality control and photographic work. The clear inspection loupe view facilitates rapid assessment of film and other flat media without sacrificing accuracy, while the robust scale integration simplifies transfer of visual observations into measurement records. Designed for bench-top use, the instrument aids technicians and photographers who require consistent visual verification without complex setup. Professional handling and support for daily use Built for routine use, the loupe balances optical performance with straightforward handling to reduce operator fatigue and minimise measurement uncertainty. The film inspection capability is particularly relevant in imaging labs, reprographics and archival work where detailed visual checks are frequent. Metav’s approach to supplying precision tools emphasises dependable availability and industry-grade selection, supporting workshops and small labs with convenient access to calibrated instruments and sensible logistics. Contact Metav Werkzeuge for personalised advice on the Peak measuring loupe MS905.400 and secure precision optics that suit the workshop’s measurement needs Technical Data Article number: MS905.400 Product name: Peak measuring loupe Magnification: 7x Lens type: anastigmatic Dimensions: Ø55×53 mm Field of view: Ø41 mm Scale: 0.1 mm Measuring range: 0–36 mm Suitable for: photographic film inspection Facts Magnification: 7x Field of view: Ø41 mm Scale resolution: 0.1 mm Measuring range: 0–36 mm Dimensions: Ø55×53 mm Special features Anastigmatic lens Suitable for photographic film inspection Category: Optik SKU: MS905.400 FAQ Is the loupe suitable for measuring on photographic film? Yes. The Peak measuring loupe MS905.400 is specified for the inspection of photographic film and provides a clear view and a 0.1 mm scale for visual measurement. Can the loupe replace a precision caliper for small measurements? The loupe complements calipers by enabling visual measurement and quick checks; the 0–36 mm measuring range and 0.1 mm scale support fast verification rather than substitute for high-accuracy caliper readings. What does an anastigmatic lens mean in practical terms? An anastigmatic lens, as fitted to this loupe, minimises distortion and colour fringing so edges and details appear true, improving visual accuracy during inspection. Is the field of view large enough for strip or frame inspection? The Ø41 mm field of view provides ample coverage for many film frames and strips, reducing the need for frequent repositioning during inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Taking advantage of a 60 mm lens and 5× magnification ensures dependable close-up inspection with a comfortable working distance, while the robust metal frame keeps the tool aligned during repeated checks; order the magnifier directly via Metav Werkzeuge or consult our technical advisers for specification support. Metav IndustryLine Hand magnifier M503.131 — 60 mm lens, 5× magnification A compact inspection tool, the Hand magnifier M503.131 is designed for precise visual checks in workshops, inspection benches and quality-control stations. 60 mm glass lens for clear magnification 5× magnification for detailed inspection Metal frame for robust workshop use Wide, clear view for faster defect detection The large 60 mm lens offers a broader field of view than smaller hand lenses, making it easier to scan surfaces and components without constant repositioning. With 5× magnification, small features such as fine threads, solder joints or print defects become visibly distinct while retaining a practical working distance. This balance between magnification and field size improves inspection throughput and reduces the need for repeated handling, contributing to a more efficient quality routine and fewer reworks. Durable design that keeps measurements repeatable A metal frame provides structural stability and resists everyday workshop wear, which helps maintain optical alignment over time. At approximately 0.1 kg, the device is notably lightweight, reducing operator fatigue during prolonged use and allowing for precise manual guidance. The construction supports routine visual inspection tasks where a stable hand lens is required, ensuring consistent observation quality across multiple shifts and operators. Practical use cases and integration into the workflow The magnifier is suited to electronics assembly, watch and jewellery inspection, prototyping and general workshop QC where a portable optical aid accelerates decision-making. As a straightforward inspection accessory, it complements microscopes and measuring tools by offering immediate, handheld visual verification. The product’s simple concept delivers a pragmatic increase in detection capability without introducing complex calibration procedures or lengthy setup routines. For clear, dependable visual checks, order the Metav IndustryLine Hand magnifier M503.131 from Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com / +49 2822 7131930 for tailored advice. Technical Data SKU: M503.131 GTIN: 4054469144627 ECLASS: 21170614 Tariff number: 90138090 Facts Lens diameter: 60 mm Magnification: 5× (5 dioptre) Weight: 0.1 kg Special features Material: metal frame Category: Optik Compact, handheld design FAQ What magnification does the lens provide? The Hand magnifier M503.131 provides 5× magnification (5 dioptre), suitable for detailed visual inspection while maintaining a usable working distance. Is the lens diameter suitable for scanning larger areas? Yes, the 60 mm lens offers a wider field of view than smaller hand lenses, making surface scanning and component checks quicker and less fiddly. Can the magnifier withstand workshop use? The device features a metal frame, which enhances robustness and helps maintain optical alignment under regular workshop conditions. Is the magnifier suitable for electronics inspection? The Hand magnifier M503.131 is well suited to electronics assembly and solder-joint inspection, providing clear enlargement for visual verification tasks. Does the product include any calibration certificate? No calibration certificate is indicated for this optical magnifier; it is a ready-to-use inspection tool intended for visual checks and not for calibrated dimensional measurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com