Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
10.85mm Gauge Pin Single 50mm Length Workshop Version - Metav IndustryLine
A compact, single‑piece gauge pin that combines high dimensional accuracy and a robust special‑steel construction for reliable end‑dimension checks; the 50 mm length and Ø 10.85 mm diameter deliver consistent fit verification in workshop routines. Order this gauge pin directly via Metav Werkzeuge or contact our consultants for application guidance. Metav IndustryLine gauge pin M323.A85 — Ø 10.85 mm, 50 mm length The gauge pin M323.A85 is a single test pin designed for precise end‑dimension and fit verification in workshop and quality‑control environments. Ø 10.85 mm precision gauge 50 mm length workshop version Special steel construction Tolerance ±0.002 mm accuracy Precision that keeps production within tolerance The gauge pin is engineered for repeatable measurement when confirming end dimensions or assessing bore fits. With a nominal diameter of Ø 10.85 mm and a verified tolerance of ±0.002 mm, the pin supports tight inspection limits typical in fixture and gauge work. The result is fewer rejects and more reliable inline checks; by converting a visual fit test into a measurable datum, process stability is improved and rework reduced. Robust design for everyday workshop use A 50 mm shank length provides a practical balance between handling and reach, while the workshop version construction resists everyday wear. Manufactured from special steel, the component offers mechanical resistance suited to repeated insertion and withdrawal cycles. The straightforward geometry makes the pin easy to integrate into go/no‑go fixtures or manual inspection kits, enhancing throughput without complicating the inspection routine. Simple implementation, clear measurement outcomes As a single‑item test pin from Metav IndustryLine, the M323.A85 supports rapid verification tasks on production lines or in toolrooms. The compact layout enables quick comparison of mating parts and immediate decision making on assembly compatibility. Where documented traceability is required, the pin’s consistent diameter and tolerance facilitate straightforward recording of pass/fail results within quality documentation and measurement logs. Order the Metav IndustryLine gauge pin M323.A85 via Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com for technical clarification and fast processing Technical data SKU: M323.A85 GTIN: 4061905063657 Brand: Metav IndustryLine Material: special steel Facts Diameter: 10.85 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop version Single test pin for end‑dimension checks Compact design for go/no‑go and fit verification FAQ What is the delivered tolerance of the gauge pin? The Metav IndustryLine gauge pin M323.A85 is specified with a tolerance of ±0.002 mm, suitable for tight fit and end‑dimension verification. Which material is used for this test pin? The pin is made from special steel, offering durability for repeated inspection cycles and stable mechanical behaviour. Is this pin intended for workshop or laboratory use? This is a workshop version designed for routine quality‑control tasks, jigs and fixture checks rather than specialised laboratory metrology. How is the product supplied? The item is supplied as a single test pin (SKU M323.A85) for direct integration into inspection kits and gauge sets. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.86mm Gauge Pin, Single, 50mm Length, Special Steel, Workshop Version, Supplied in Case - Metav IndustryLine
Combining a tight diameter tolerance of ±0.002 mm, a precise 10.86 mm nominal diameter and a compact 50 mm length, this workshop-grade gauge pin delivers repeatable end-dimension checks and reliable fit verification for production and inspection tasks. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for tailored advice. Gauge pin, single, 10.86 mm Ø, 50 mm length — Metav IndustryLine workshop version The gauge pin, single, 10.86 mm Ø, 50 mm length is a compact, high-precision cylindrical pin intended for end-dimension verification and fit testing in workshop and bench inspection settings High-precision tolerance ±0.002 mm Diameter 10.86 mm for accurate fit checks 50 mm length in special steel Workshop version with robust finish Reliable precision for recurring fit checks The workshop-grade pin is manufactured to a diameter of 10.86 mm with a manufacturing tolerance of ±0.002 mm, a specification that directly reduces false rejects and rework in serial inspection. By providing a stable reference dimension, the pin enables consistent go/no-go evaluations and quick functional checks of bores, seats and mating components. The compact form factor and hardened material deliver the rigidity needed for repeatable measurements, so inspection cycles become both faster and more predictable. Durable construction and measurable benefits Made from special steel, the pin is finished for wear resistance and easy cleaning, which prolongs service life under workshop conditions. The small mass and 50 mm length make handling straightforward during assembly checks, while the close tolerance minimises uncertainty when gauging mating parts. In practice, this means fewer measurement iterations and reliable pass/fail decisions at the production line or inspection bench. The specification also supports quality-control documentation where pinpoint dimensional consistency is required. Practical applications and handling guidance This precision pin is suited to bench inspection, assembly verification and setup tasks in toolrooms and small-batch production. Typical uses include checking final bore sizes, verifying seating surfaces and confirming mating fits before assembly. For handling, keep the pin free of burrs and contamination and store it dry to preserve the measured surface. For tailored integration into existing gauge sets or inspection routines, technical guidance is available from Metav’s product advisors, who can advise on best practices for effective implementation. Choose the Metav IndustryLine gauge pin for dependable end-dimension gauging and contact Metav Werkzeuge in Emmerich for purchasing or technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.A86 GTIN: 4061905063664 Brand: Metav IndustryLine Category: Gauge pins Facts Diameter: 10.86 mm Length: 50 mm Manufacturing tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop version Material: Special steel Supplied individually Application: End-dimension checks FAQ What is the primary purpose of this gauge pin? The gauge pin is designed for end-dimension verification and fit testing; the Metav IndustryLine gauge pin (SKU M323.A86) provides a reliable reference for bore and seating checks. What tolerance does the pin guarantee? The pin is specified with a manufacturing tolerance of ±0.002 mm, which ensures tight dimensional control for accurate fit verification during inspection and assembly. What material is used and how durable is it? Constructed from special steel, the pin features a workshop-grade finish that resists wear under routine inspection conditions and supports repeated use. Is the pin supplied individually or in sets? This item is supplied individually, as indicated in the product description, allowing flexible use in bespoke inspection workflows. Where is this gauge pin typically used? Typical applications include bench inspection, toolroom checks and final fit verification in small-batch production and maintenance environments using the Metav IndustryLine pin. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.87mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Combine high repeatability and robust workshop construction to secure reliable end‑measurement results; with ±0.002 mm tolerance and a 10.87 mm diameter this single gauge pin supports consistent inspection and fixture alignment. Order the gauge pin directly via Metav Werkzeuge or contact our consultants for application advice. Gauge pin M323.A87 — 10.87 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin designed for precise end‑measurements and routine workshop inspection tasks, supplied as a single, workshop‑grade test pin. Workshop execution, robust design Diameter 10.87 mm, length 50 mm High precision: ±0.002 mm accuracy Precision that reduces rework and speeds inspection The solid construction delivers measurable benefits in production control: ±0.002 mm repeatability substantially lowers measurement uncertainty compared with coarse gauges, making the pin suitable for fine inspection tasks and tolerance checks. With a nominal diameter of 10.87 mm and a 50 mm shank length the component is optimised for reliable insertion in bores, alignment of fixtures and end‑measurement checks. The narrow tolerance bandwidth supports process stability, reducing the likelihood of scrap and minimising downstream rework in batch production. Built for daily workshop use and fixture integration The workshop execution and special steel composition of the pin ensure robust handling and longevity under frequent use. The compact length keeps handling straightforward on assembly benches and in test rigs, while the moderate mass contributes to nimble manipulation without compromising stiffness. Designed as a single‑piece test instrument, the pin is particularly suitable for use as an end mass in jigs, for transfer checking and as a reference gauge in routine control loops. Its construction emphasises durability and consistent contact surfaces for repeated measurements. Practical compatibility and measurement workflow benefits Integration into inspection routines is straightforward: the pin functions as a reference element for bore checking, alignment and comparative gauging within inspection fixtures. Its nominal dimensions and tight accuracy make it compatible with established measuring setups and repeatable hand and bench procedures. For demanding production environments that require verifiable end‑measurement, the pin supports traceable checks when combined with calibrated masters and measurement benches. Detailed identifiers such as the SKU M323.A87 and GTIN facilitate inventory and documentation in quality systems. For precise end‑measurement applications, contact Metav Werkzeuge to request the Metav IndustryLine gauge pin M323.A87 and discuss suitability for specific inspection workflows. Technical data Article number: M323.A87 GTIN: 4061905063671 Brand: Metav IndustryLine Material: Special steel Weight: 0.1 kg Label: Gauge pin, single, 10.87 mm, length 50 mm Facts Diameter: 10.87 mm Length: 50 mm Tolerance / Accuracy: ±0.002 mm Weight: 0.1 kg Special features Workshop execution Single test pin delivery Suitable for end‑measurement and fixture alignment Robust contact surfaces for repeated use FAQ What is the intended use of this gauge pin? The gauge pin M323.A87 is intended for end‑measurement, bore checking and fixture alignment in workshop and inspection applications where tight repeatability is required. How precise is the pin and what does ±0.002 mm mean in practice? An accuracy of ±0.002 mm indicates a very small manufacturing deviation from nominal diameter, allowing the pin to serve as a reliable reference for tight tolerance checks and to reduce measurement variability. Which material is used and why does it matter? The pin is made from special steel, chosen for wear resistance and stable contact surfaces, which is important for maintaining consistent dimensions over repeated inspection cycles. Can this pin be used in production fixtures? Yes, the pin’s 50 mm length and robust workshop design make it suitable for integration into jigs and fixtures for alignment and comparative gauging operations. Is the SKU and GTIN available for documentation? Stock and traceability details are provided: SKU M323.A87 and GTIN 4061905063671, which support inventory management and quality records. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.88mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
A compact inspection solution combining high dimensional fidelity and robust workshop handling: the gauge pin, single, Ø10.88 mm, length 50 mm delivers a tight ±0.002 mm tolerance on a special steel body for reproducible checks. Order the item directly via Metav Werkzeuge or ask the consultants for application support. Gauge pin, single, Ø10.88 mm — 50 mm length, ±0.002 mm (Metav IndustryLine) The Gauge pin, single, Ø10.88 mm, length 50 mm is a micro‑class inspection pin for precise dimensional checks and plug‑gauge applications in workshop and small‑part quality control. Precision Ø10.88 mm with ±0.002 mm tolerance 50 mm length in hardened special steel Workshop design for robust daily inspection Compact micro‑class gauge for fine components Precision that makes measurements repeatable The design focuses on measurable reliability: a nominal diameter of Ø10.88 mm combined with an ±0.002 mm tolerance yields repeatable reference points for go/no‑go checks, fixture setting and comparative measurement tasks. That level of accuracy reduces rework by narrowing acceptance bands and supports tight production tolerances. The construction in special steel provides dimensional stability under typical workshop conditions while keeping the component compact enough for confined jigging situations. Built for robust handling and straightforward inspection With a 50 mm working length and a mass of approximately 0.1 kg, this inspection pin is sized for easy handling and integration in manual and semi‑automatic test setups. The workshop version construction emphasises durability: surfaces are finished to resist quick wear and to preserve the reference diameter under repeated seating in bores and gauges. As a compact, micro‑class tool, it is particularly useful where space is limited but accuracy must not be compromised—for example when checking small bearings, housings or alignment pins. Seamless integration into quality workflows The item is supplied under the Metav IndustryLine programme with identifiers for procurement and inventory: M323.A88 and GTIN 4061905063688 make it straightforward to document in inspection plans and ERP systems. As a single, standardised reference pin it simplifies fixture setup, reduces measurement variability and makes periodic cross‑checks between operators more consistent. The combination of high geometric fidelity and workshop resilience supports efficient first‑article inspection and ongoing process control. Contact Metav Werkzeuge in Emmerich to request technical datasheets or to reserve the M323.A88 gauge pin for workshop inspection — phone +49 2822 7131930 or info@metav-werkzeuge.com Technical data SKU: M323.A88 GTIN: 4061905063688 Description: Gauge pin, single, Ø10.88 mm, length 50 mm Material: Special steel Weight: 0.1 kg Facts Diameter: 10.88 mm Length: 50 mm Tolerance: ±0.002 mm Category: Gauge pins (Messstifte) Special features Workshop version Compact micro‑class format High dimensional fidelity Eclass: 21170231 FAQ What is the declared dimensional tolerance of this inspection pin? The gauge pin is specified with a tolerance of ±0.002 mm, providing high‑precision reference for close‑tolerance checks. Which material is used for the pin body? The product is made from special steel, selected for dimensional stability and wear resistance in workshop environments. Is this pin suitable for use in small bore gauging and fixture setting? Yes — the compact micro‑class diameter and 50 mm length make the pin well suited to small bore gauging, fixture alignment and component seating checks. How is the item identified for procurement and documentation? The gauge pin is listed under SKU M323.A88 and GTIN 4061905063688 for clear traceability in ordering and quality records. Does the product data indicate delivery with a calibration certificate? No calibration certificate is indicated in the supplied product data for this item. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.89mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of precision, compactness and workshop-ready robustness: the combination of a tight ±0.002 mm tolerance, a 10.89 mm nominal diameter and a 50 mm length ensures repeatable checks of bore and end dimensions under daily production conditions. Order the gauge pin directly via Metav Werkzeuge or consult our advisers for application-specific recommendations. Gauge pin M323.A89 — 10.89 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin designed for reliable verification of bores and end dimensions in workshop inspection and small-series production. Workshop-grade special steel construction Diameter 10.89 mm, tolerance ±0.002 mm 50 mm overall length for compact inspections Supplied individually for flexible use Consistent diameter control that reduces rework The compact inspection pin delivers absolute focus on one task: diameter verification. With a nominal diameter of 10.89 mm and a verified tolerance of ±0.002 mm, the pin supports quick go/no-go assessments and detailed checks where repeatability matters. The small footprint of the component speeds handling and reduces fixture complexity, so measurement cycles become faster and less error-prone. For routine quality control, the tight tolerance provides a clear, objective basis for acceptance decisions and downstream process adjustments. Workshop-ready design for everyday handling Built in a workshop version for frequent use, the pin is manufactured from special steel selected for dimensional stability under mechanical stress. The 50 mm overall length offers a balance between reach and rigidity, aiding secure holding in vises or test fixtures without excess overhang. Supplied individually, the single-piece format simplifies inventory and allows technicians to select precise sizes as needed. The combination of practical length and robust material reduces handling-induced variation and supports a steadier inspection routine on the shop floor. Traceable components that fit quality workflows Identification and traceability are straightforward: the item is listed as SKU M323.A89 with GTIN 4061905064333, simplifying stock management and integration into inspection plans. The precision class and stable geometry make this pin suitable for repetitive checks during assembly and final inspection, helping to keep non-conforming parts from progressing through the process. For specialised requirements or measurement strategies, Metav IndustryLine advisers can clarify fitment into existing gauges or fixtures and suggest compatible control practices. Ensure consistent inspection results with Metav IndustryLine gauge pins — contact Metav Werkzeuge in Emmerich for delivery options and application guidance Technical data Article number: M323.A89 GTIN: 4061905064333 Category: Gauge pins (Messstifte) Label: Prüfstift, einzeln, 10,89 mm Länge 50 mm Numerical data Nominal diameter: 10.89 mm Length: 50 mm Weight: 0.1 kg Tolerance: ±0.002 mm Features Material: Special steel Version: Workshop execution Supplied: Single item eClass: 21170231 FAQ What is the primary use of this gauge pin? The gauge pin M323.A89 from Metav IndustryLine is intended for verification of bore diameters and end dimensions in workshop inspection and small-series production. What tolerance can be expected from the pin? The inspection pin is specified with a tolerance of ±0.002 mm, providing high repeatability for go/no-go checks and dimensional assessments. Is the material suitable for daily workshop use? Yes, the pin is manufactured from special steel in a workshop-grade execution, offering dimensional stability under regular handling. How is the item identified for inventory and traceability? Identification is via SKU M323.A89 and GTIN 4061905064333, which supports integration into inventory systems and inspection documentation. Can this pin be integrated into existing gauges or fixtures? The pin's compact length and standard diameter make it straightforward to incorporate into fixtures; Metav IndustryLine advisers can recommend specific mounting or complementary gauge elements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.8mm Gauge Pin 50mm Length Workshop Version, Special Steel In Plastic Case - Metav IndustryLine
Take advantage of the combination of workshop-grade construction, tight dimensional tolerance and compact dimensions for reliable end-size inspection. Order the inspection pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.A80 — 10.8 mm diameter, 50 mm length (Metav IndustryLine) A Gauge pin M323.A80 intended for precise end-size checks and routine dimensional verification in workshop and inspection environments. 10.8 mm diameter precision pin 50 mm overall length Accuracy ±0.002 mm tolerance Workshop-grade special steel Consistent dimensional control with tight tolerance The M323.A80 is built for repeatable verification of finished dimensions: with an accuracy of ±0.002 mm the pin supports high-precision pass/fail and reference measurements during machining and assembly. Stated tolerance levels allow straightforward interpretation against drawing limits and inspection plans, which speeds up quality decisions and reduces rework. The clear numeric specification also makes this pin suitable for use in documented quality-control procedures and calibration routines. Robust, workshop-ready construction for everyday use Manufactured from special steel and specified as a workshop-grade execution, this measuring pin balances hardness and toughness for frequent handling. The compact form—10.8 mm diameter with a 50 mm overall length—minimises flex and provides a stable reference when inserted into holes or used against datum faces. The mechanical simplicity of the design reduces maintenance needs and ensures straightforward handling on the shop floor, contributing to dependable inspection throughput. Practical applications and measured benefits for production Designed for end-size inspection and incremental checks, the pin is particularly useful for verifying hole diameters, locating features and checking bores during in-process or final inspection. As a single inspection instrument, it serves as a direct, low-complexity measuring aid that integrates easily into existing workflows. Using a dedicated gauge pin like this one helps to standardise measurement routines, shorten inspection times and maintain consistent quality across batches. Contact Metav Werkzeuge today to discuss how the M323.A80 can be integrated into current inspection routines or to request a specification sheet referencing the M323.A80 Technical data Article number: M323.A80 GTIN: 4061905063602 Label: Inspection pin, single, 10.8 mm diameter, 50 mm length Facts Diameter: 10.8 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Special features Material: Special steel Workshop execution Category: Gauge pins FAQ What tolerance can be expected from this gauge pin? The single inspection pin is specified with an accuracy of ±0.002 mm, enabling precise end-size and reference checks. Is the M323.A80 suitable for bore inspection on the shop floor? Yes, this gauge pin is designed for routine bore and hole verification in workshop environments thanks to its compact 10.8 mm diameter and 50 mm length. Which material is the pin made from and what does that mean for durability? The pin is made from special steel, chosen for its balance of wear resistance and toughness appropriate for regular inspection use. Is the product supplied as a single unit or in a set? The article is offered as a single inspection pin; the product designation indicates the individual item format. Can this pin be used as a reference in quality documentation? Yes, the clear numeric specification (diameter, length and ±0.002 mm accuracy) supports use as a documented reference in inspection records and control plans. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.9 mm Test Pin Length 50 mm Workshop Version, Special Steel Kitted - Metav IndustryLine
Take advantage of the combination of high repeatability, robust special-steel construction and a compact 50 mm length for reliable end measurements in workshop routines; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single — 10.9 mm diameter, 50 mm length (Metav IndustryLine) Gauge pin, single, 10.9 mm diameter and 50 mm length is a workshop-grade measuring pin designed for precise end measurements and checking bore fits Tolerance ±0.002 mm Diameter 10.9 mm, length 50 mm Made from special steel Workshop-grade single pin delivery Precision that reduces rework and inspection time The gauge pin is manufactured to a tolerance of ±0.002 mm, providing a measurable advantage where repeatable end measurements are required. Such fine tolerances translate into fewer ambiguous fit checks and reduced rework cycles on production parts. Used as a reference pin for checking bore sizes or verifying final dimensions, the component’s 10.9 mm diameter and compact 50 mm length offer a balance between handling convenience and the rigidity needed for reproducible results. This level of precision supports process stability in workshop environments and contributes directly to improved throughput. Robust material and workshop-focused design Constructed from special steel, the pin is optimised for repeated contact and routine inspection use. The workshop-grade execution emphasises durability under regular handling while maintaining surface integrity for consistent measurements. Supplied as a single pin, this item suits toolboxes and inspection kits where individual replacement sizes are required. The compact format and material choice reduce the risk of deformation under standard use, increasing the service life of the gauge and preserving measurement confidence over many cycles. Integration into quality workflows and supply reliability As part of the Metav IndustryLine, this gauge pin benefits from being offered by an established precision distributor with a practical European stock approach. Metav’s inventory and quality filter aim to make high-precision measuring tools accessible for workshops and small-series manufacturers alike, supporting continuous production without lengthy procurement delays. Choosing this pin aids reliable in-house checks and complements production control activities, helping maintain conformity across batches and supporting traceable inspection routines. For assured precision in end measurements, contact Metav Werkzeuge to secure this Metav IndustryLine gauge pin (SKU M323.A90) and discuss immediate supply options via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M323.A90 GTIN: 4061905064340 Label: Prüfstift, einzeln, 10,9 mm Länge 50 mm Manufacturer: Metav IndustryLine Facts Diameter: 10.9 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop execution (Werkstatt-Ausführung) Single gauge pin (individual delivery) Category: Messstifte FAQ What accuracy can be expected from this gauge pin? The gauge pin is specified with an accuracy of ±0.002 mm, making it suitable for precise end measurements and repeatable fit checks in a workshop environment. Which material is the pin made from and why does it matter? The pin is made from special steel, selected to provide wear resistance and dimensional stability under routine inspection use, which preserves measurement reliability. Can this pin be used to check bore diameters? Yes, the gauge pin serves for end measurements and bore checks where a 10.9 mm reference diameter and 50 mm length are appropriate for the application. How is the product identified for reordering? Reorder using SKU M323.A90 or GTIN 4061905064340; both identifiers are listed for straightforward procurement and inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.91mm Gauge Pin Single 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of fine tolerance, compact dimensions and workshop-ready robustness for consistent end‑measure checks; the 10.91 mm diameter and 50 mm length enable repeatable fit and alignment tasks. Order the gauge pin directly via Metav Werkzeuge or ask our consultants for application advice. Gauge pin M323.A91 — single test pin, 10.91 mm diameter, 50 mm length Gauge pin M323.A91 as a single inspection pin for end‑measure checks and small‑part alignment in workshop and toolroom environments. Workshop version for daily use Diameter 10.91 mm, length 50 mm Tolerance ±0.002 mm Delivered in a protective case Precision for compact inspection tasks The M323.A91 is engineered for precision in confined setups where small deviations matter. With a nominal diameter of 10.91 mm and an overall length of 50 mm, this single gauge pin is suited to checking end dimensions, locating holes and verifying fit‑up on small assemblies. The specified ±0.002 mm tolerance expresses the manufacturing accuracy and supports repeatable go/no‑go and fit checks, reducing uncertainty during incoming inspection and assembly operations. Thanks to the compact form factor, the pin simplifies handling when access is restricted. Built for workshop durability and ease of handling Presented as a workshop version, the pin is manufactured from special steel to withstand frequent use in production and maintenance settings. The robust construction limits surface deformation under normal handling and contributes to consistent measurement outcomes over time. For transport and protection, the item is supplied in a protective case, which reduces the risk of damage during storage and transit and keeps the inspection tool ready for immediate use at the bench or in the fixture bay. Designed application range and practical benefits Classified in the Micro range (measurement range up to 100 mm), this inspection pin addresses the needs of watchmaking, precision component assembly, jigs, fixtures and detailed quality control tasks. The compact dimensions make it convenient for insertion into tight bores and for use as a reference mandrel during alignment operations. The single‑piece design supports straightforward acceptance criteria and is compatible with common test benches and manual gauging procedures used in small‑part production. Traceability and workshop integration The gauge pin is supplied with manufacturer traceability details to aid stock management and documentation: SKU M323.A91 and GTIN 4061905064357 identify the item for ordering and inventory systems. Delivered as a single‑unit inspection pin in a transport case, the component integrates easily into standard tool sets and metrology trays, supporting efficient inspection workflows. Metav’s role as a precision partner ensures reliable sourcing and a quality filter for European customers, helping to maintain production continuity. Contact Metav Werkzeuge for specification checks and supply of the Metav IndustryLine gauge pin M323.A91 — our Emmerich team will advise on compatibility and delivery options. Technical data Article number: M323.A91 GTIN: 4061905064357 Manufacturer: Metav IndustryLine Material: Special steel Weight: 0.1 kg Length: 50 mm Diameter: 10.91 mm Facts Diameter: 10.91 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg ECLASS: 21170231 Special features Workshop version Protective case for transport Single gauge pin for end‑measure checks Story trigger: endmasse FAQ What are the main dimensions of this gauge pin? The gauge pin M323.A91 has a diameter of 10.91 mm and a length of 50 mm, suited to precise end‑measure checks. What level of tolerance can be expected? Manufacturing tolerance for the M323.A91 is ±0.002 mm, providing consistent results for fit and go/no‑go assessments. Which material is used for the pin? The pin is made from special steel, chosen for durability in workshop environments and repeated handling. Is the pin supplied ready for use in workshops? Yes, the M323.A91 is delivered as a workshop version and comes in a protective case for transport and storage. For which applications is this gauge pin designed? This single inspection pin is intended for end‑measure checks, alignment and small‑part verification in toolrooms, fixtures and precision assembly work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.92mm Test Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop‑grade robustness, ±0.002 mm tolerance and compact handling for reliable end‑measure checks; order the gauge pin directly via Metav Werkzeuge or ask the consultants for application advice. Gauge pin M323.A92 — single gauge pin, ø 10.92 mm × 50 mm, workshop version (Metav IndustryLine) A gauge pin M323.A92 designed for precise end‑measure and fit verification in workshop inspection routines. Workshop version, robust design Diameter 10.92 mm for end‑measure checks Tolerance ±0.002 mm for precise fits Delivered in a protective case Repeatable precision for end‑measure checks This single gauge pin is manufactured from special steel and finished for consistent contact geometry, delivering a declared tolerance of ±0.002 mm. Such accuracy ensures that plug‑fit and end‑measure verifications produce reproducible results when used as a reference in go/no‑go checks or gauge stacks. The compact 50 mm overall length and 10.92 mm diameter make the component particularly suited to bench‑level inspection tasks where stability and repeatability are essential. The declared precision supports efficient quality control decisions and reduces rework driven by uncertain fits. Robust workshop design that withstands daily use Engineered as a workshop variant, the component combines a hardened surface with a geometry that resists edge damage during repeated handling. The choice of special steel balances wear resistance with measured machinability so that the pin maintains its profile across many cycles. This durability translates into lower replacement frequency and predictable performance on the shop floor, contributing to faster inspection throughput and reduced downtime in production sequences. Practical handling and protected transport At 50 mm length the gauge pin remains easy to position and measure with standard holders and measurement fixtures; the short, stiff form reduces bending and handling error during insertion. Delivery in a protective case keeps the reference surface free from knocks and contamination in storage and transit, preserving the calibration state until first use. Where traceability is required, the product’s marking and packaging simplify inventory assignment and secure integration into a calibrated gauge set. Typical uses and material compatibility The inspection pin is optimised for end‑measure verification, go/no‑go stacking and assembly checks in general mechanical and maintenance workshops. Its geometry and tolerance make it suitable as a reference in small‑component assemblies and for spot checks on mating bores. The special steel construction is aimed at typical workshop environments; compatibility with specific materials should be evaluated in cases involving abrasive or corrosive media. For an application review or to secure the Metav IndustryLine gauge pin M323.A92 for an inspection kit, contact Metav Werkzeuge in Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.A92 GTIN: 4061905064364 Brand: Metav IndustryLine Material: Special steel Weight: 0.1 kg Length: 50 mm Diameter: 10.92 mm Tolerance: ±0.002 mm Core specifications Diameter: 10.92 mm Length: 50 mm Mass: 0.1 kg Accuracy: ±0.002 mm SKU: M323.A92 Special features Workshop execution Single gauge pin for end‑measure checks Delivered in protective case Suitable for inspection and fit verification Compact, stiff geometry for repeatable handling FAQ What is the declared tolerance of this gauge pin? The declared tolerance for the Metav IndustryLine gauge pin M323.A92 is ±0.002 mm, specified for consistent fit and end‑measure checks. Is the gauge pin supplied ready for use and protected in transit? Yes, the inspection pin is supplied in a protective case to preserve the measuring surface and simplify storage until deployment. Which materials is the pin suitable for checking? The pin is made from special steel and is intended as a reference for mechanical assemblies and mating bores; compatibility with specific materials should be considered case by case. Can the pin be used in go/no‑go gauge stacks? The component’s tight tolerance and consistent geometry make it suitable as a reference element within gauge stacks and simple go/no‑go arrangements. What is the overall length and diameter of the pin? The gauge pin measures 50 mm in length with a 10.92 mm diameter, a compact format for bench inspection and assembly checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.93mm Test Pin 50mm Length Workshop Version - Metav IndustryLine
Combining workshop‑grade construction, a compact 50 mm length and a tight tolerance of ±0.002 mm, this test pin delivers repeatable end‑measure checks and reliable gauge setting in production and inspection workflows. Order the test pin directly via Metav Werkzeuge or consult our technical advisers for application support. Test Pin M323.A93 — 10.93 mm diameter, 50 mm length (Metav IndustryLine) Test Pin M323.A93 is a workshop‑grade reference pin for precise end‑dimension checks and gauge setting in machining and inspection environments. Workshop‑grade construction Diameter 10.93 mm precision Tolerance ±0.002 mm Delivered in protective transport box Reliable reference for repeatable end‑measure checks The M323.A93 test pin is designed as a compact, high‑precision reference component, offering a 10.93 mm nominal diameter and 50 mm overall length that suit fine adjustment and end‑dimension verification. With a specified tolerance of ±0.002 mm, the pin provides a measurable reduction in measurement uncertainty compared with coarse references, which improves first‑pass yield and shortens inspection loops. The chosen special steel material combines surface hardness and dimensional stability, so repeatability is maintained across routine handling and tactile gauging. Built for workshop handling and fixture use As a workshop‑grade article, this reference pin balances robustness with easy handling: the compact geometry minimises bending and makes the pin straightforward to seat in fixtures or indicator stands. Delivery in a protective transport box preserves the calibrated surface during transport and storage, reducing downtime caused by reconditioning. The modest mass (approximately 0.1 kg) simplifies manual placement while giving sufficient inertia for stable contact with probes and comparators, supporting faster and more consistent inspection cycles on the shop floor. Clear technical identity and stock integration The component is supplied as a single reference pin and carries the internal SKU M323.A93 and GTIN 4061905064807, facilitating inventory control and traceability in procurement systems. The compact dimensions place the item in the Micro measurement class (max. 10–100 mm), which is the preferred range for fine mechanical work and fixture assembly—this classification helps selecting the right tool for watchmaking, small housings or precision gauge construction. For specialised applications or batch supply, Metav’s product specialists can advise on storage, handling and compatibility with existing test jigs. For robust workshop inspection and dependable gauge references, choose the Metav IndustryLine test pin and contact Metav Werkzeuge in Emmerich for tailored delivery and advice: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: M323.A93 GTIN: 4061905064807 Material: Special steel Length: 50 mm Diameter: 10.93 mm Weight: 0.1 kg Tolerance: ±0.002 mm Facts Measurement class: Micro (max. 10–100 mm) Delivery: single test pin Label: Prüfstift, einzeln, 10,93 mm Länge 50 mm Special features Workshop‑grade design Delivered in protective transport box Workshop execution SKU: M323.A93 FAQ Is the test pin suitable for use as a reference in small fixture assemblies? Yes. The test pin is specified for precision reference duties in small fixtures and assemblies; with a 10.93 mm diameter and ±0.002 mm tolerance it is suitable for fine positional and end‑dimension checks. What material is the pin made from and how does that affect wear? The pin is manufactured from special steel, chosen for dimensional stability and surface resistance; this supports repeated contact with gauges and probes without rapid degradation. How is the item delivered and how should it be stored? The test pin is supplied as a single unit in a protective transport box, intended to protect the measuring surface during storage and transport; dry, dust‑free storage minimises corrosion risk. Can this pin be ordered in larger quantities for production use? Yes. The SKU M323.A93 and GTIN 4061905064807 facilitate bulk ordering and inventory management; Metav IndustryLine can advise on lead times and packaging for larger batches. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.94mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.002 mm tolerance, Special steel workshop construction and the compact 50 mm length for reliable end‑measure checks; order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single, 10.94 mm — 50 mm length (Metav IndustryLine workshop version) The gauge pin, single, 10.94 mm is a compact reference pin for precise end‑measure and go/no‑go checks in workshop inspection routines. Workshop version for daily use Diameter 10.94 mm for tight fits Length 50 mm for compact checks Tolerance ±0.002 mm for precise inspection Precision that keeps production moving The workshop‑grade pin provides a consistently low tolerance of ±0.002 mm, which translates into fewer false rejects and faster verification cycles on the shop floor. With a nominal diameter of 10.94 mm, the pin functions as a reliable reference for end‑measure operations and fixture checks. This stability reduces rework and shortens decision loops during quality control, supporting a smoother production flow and better utilisation of inspection resources. Built for everyday handling and repeatability Manufactured from Special steel and finished for workshop use, the pin combines surface durability with dimensional integrity across repeated insertions. At 50 mm overall length and approximately 0.1 kg mass the component is compact to manoeuvre yet robust enough for daily handling. Supplied as a single item and protected for transport in a dedicated transport box, the design minimises transit damage and enables immediate deployment in assembly or inspection stations. Easy integration into existing inspection routines Classified in the Micro range (10–100 mm), this precision reference pin slots into standard gauge blocks, fixtures and manual measuring jigs without the need for extensive adaptation. The simple geometry supports quick visual checks and tactile go/no‑go tests, while the documented tolerance makes it straightforward to include the pin in inspection protocols and reporting. The compact format supports tight‑space applications where consistent roundness and diameter control are essential for fit and function verification. Secure workshop accuracy with Metav IndustryLine gauge pins—contact Metav Werkzeuge for specification support and supply from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M323.A94 GTIN: 4061905064814 SKU: M323.A94 Material: Special steel Category: Gauge pins Facts Diameter: 10.94 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Special features Workshop version Supplied as single piece Delivered in transport box Compact format for end‑measure checks FAQ What is the exact diameter of the gauge pin? The gauge pin has a diameter of 10.94 mm (SKU M323.A94) and is supplied by Metav IndustryLine as a single reference pin. What accuracy does the pin provide? The pin is specified to an accuracy of ±0.002 mm, suitable for tight tolerance go/no‑go and reference checks. How long is the pin and what is its weight? The pin measures 50 mm in length and weighs approximately 0.1 kg, offering a compact but sturdy reference standard. Is the pin intended for workshop use or laboratory calibration? This is a workshop version designed for everyday inspection and fixture checks; it is supplied as a single piece and protected for transport. Which measurement range classification applies to this pin? With a diameter of 10.94 mm the component falls into the Micro classification (10–100 mm), optimised for small‑part inspection and fine‑mechanical applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.95mm Gauge Pin Single 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of tight tolerance ±0.002 mm, workshop-grade construction and compact handling to secure reproducible end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or ask our consultants for application advice. Gauge pin M323.A95 – Single gauge pin, Ø 10.95 mm, length 50 mm (Metav IndustryLine) A single gauge pin (M323.A95) designed for precise end‑measure and plug‑gauge checks in workshop and inspection routines. Single gauge pin Ø 10.95 mm Length 50 mm, workshop execution Tight tolerance ±0.002 mm Special steel for dimensional stability Reproducible accuracy for routine inspection The compact design delivers consistent measurement results where repeatability matters. With a declared positional tolerance of ±0.002 mm, this gauge pin is suited to production sampling and final‑size verification, reducing uncertainty in serial checks. The hard, precision‑ground circumference provides a reliable reference surface that minimises bearing errors and keeps run‑out low during plug or bore tests. For quality engineers and inspection technicians, the clear numeric tolerance streamlines acceptance criteria and supports traceable quality control. Robust workshop design with secure handling Manufactured in special steel and finished in a workshop execution, the item is built for daily use without sacrificing finesse. The 50 mm length and compact diameter make it easy to position in fixtures and jigs while the short, stiff geometry reduces bending and handling errors during measurement. Delivery in a transport case protects the pin in transit and storage, preserving the calibrated surface and ensuring the tool arrives ready for immediate use on the bench or in the gauge block set. Micro‑range sizing for fine mechanical components With a measurement size of Ø 10.95 mm, this instrument falls into the micro category (measurement range up to 100 mm), which is the standard for fine mechanical work such as small bores, assemblies and watch‑type components. The small footprint and high straightness make it ideal for testing end dimensions, seating checks and go/no‑go verifications in confined spaces. Integration into existing inspection sequences is straightforward, and the high material stability supports consistent thermal behaviour across normal shop temperatures. For workshop‑grade precision choose the Metav IndustryLine gauge pin M323.A95; contact Metav Werkzeuge for procurement or technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M323.A95 GTIN: 4061905064821 Category: Messstifte Facts Diameter: Ø 10.95 mm Length: 50 mm Measurement range min/max: 10.95 mm / 10.95 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Delivery: Transport case for protection during shipping Version: Single item, workshop execution FAQ What checks is this gauge pin intended for? This gauge pin M323.A95 is intended for end‑dimension and plug checks in inspection and workshop routines, providing a defined diameter reference for bore and seating measurements. Is the tolerance suitable for serial inspection tasks? Yes, the declared tolerance of ±0.002 mm on the Metav IndustryLine gauge pin M323.A95 supports reproducible sampling and acceptance checks in production environments. How is the gauge pin delivered and protected? The item is supplied in a transport case to protect the precision surface during shipping and storage, ensuring the Metav IndustryLine gauge pin arrives ready for use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.96mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Combining ±0.002 mm repeatability with a 10.96 mm nominal diameter and a robust special steel construction, this gauge pin delivers reliable, reproducible inspection results for workshop routines and quality checks. Order the item directly via Metav Werkzeuge or consult our advisors for application guidance. Gauge pin M323.A96 — 10.96 mm Ø, 50 mm length (Metav IndustryLine) A gauge pin designed as a compact inspection pin for quick bore checks and reference measurements in workshop and production environments. Workshop version for robust, daily use Diameter 10.96 mm with ±0.002 mm tolerance Length 50 mm for standard inspection tasks Made from special steel for durability Accurate measurement as foundation for faster decision-making The pin offers an accuracy of ±0.002 mm, a tolerance level that supports precise fit checks and clear go/no‑go assessments during incoming inspection or in‑process control. The close dimensional control reduces uncertainty in pass/fail decisions, which shortens inspection loops and minimises rework. When used as a reference probe in gauge sets or in fixture checks, the consistent diameter measurement assists traceable quality records and repeatable assembly tolerances. Robust design that suits daily workshop handling Constructed from special steel and specified as a workshop execution, this inspection pin tolerates frequent handling and contact with measuring fixtures. The 50 mm working length and compact form factor make the pin easy to seat in bore gauges, adaptors or fixture receivers while maintaining low flex and stable contact. The material choice balances wear resistance and machinability so the pin retains its geometry over many cycles, supporting longer maintenance intervals and predictable lifetime performance. Simple integration into quality workflows and traceability Marked with SKU M323.A96 and GTIN for inventory control, the component is straightforward to document in parts lists and inspection plans. Its nominal diameter of 10.96 mm makes the pin suitable as a reference for small-bore checks or as part of stepped gauge arrays. Clear technical specification and standardised identification streamline stockkeeping, enable fast replacements and support consistent audit trails in production environments. Contact Metav Werkzeuge for availability, batch information and how the Metav IndustryLine gauge pins can be included in existing inspection programmes Technical data Article number: M323.A96 GTIN: 4061905064838 Manufacturer: Metav IndustryLine Facts Diameter: 10.96 mm Length: 50 mm Accuracy (variation): ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop execution Category: Gauge pin / Inspection pin SKU: M323.A96 FAQ What is the dimensional tolerance of this gauge pin? The gauge pin is specified with a dimensional variation of ±0.002 mm for the nominal 10.96 mm diameter (SKU M323.A96), providing tight repeatability for inspection tasks. Which applications is this inspection pin suitable for? This inspection pin is intended for bore and fit checks, fixture verification and small‑bore reference measurements in workshop and production inspection routines. What material is used and how does it affect durability? The pin is made from special steel, chosen for wear resistance and stability under frequent handling, which supports prolonged geometric retention during regular inspection use. Is the gauge pin supplied with an identification code for traceability? Yes, the item is identified by SKU M323.A96 and GTIN 4061905064838 for straightforward traceability in stock and quality documentation. Can this pin be used as a replacement in gauge sets? The compact form and standardised diameter make the pin suitable as a replacement element in many gauge arrays and small‑bore checking assemblies, subject to the set’s matching dimensions. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.97mm Gauge Pin Single 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of precise diameter control, durable workshop design and practical length for reliable end‑gauging tasks; order this gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single — 10.97 mm diameter | Workshop version (Metav IndustryLine) The gauge pin, single, 10.97 mm is a hardened precision end‑measure pin for go/no‑go and limit checks in workshop and production settings, supplied in a protective case for safe transport Workshop design for durable handling Diameter 10.97 mm ±0.002 mm tolerance 50 mm length for recessed features Supplied in protective case for transport Repeatable diameter control for assembly and inspection The hardened special steel construction and the defined tolerance of ±0.002 mm ensure repeatable checks on shafts, bores and seating surfaces. As a compact precision tool it delivers a consistent physical reference that reduces interpretation error compared with visual gauges; the numeric accuracy translates directly into measurable quality control benefits during incoming inspection and final assembly. The small mass and robust material mean the gauge pin resists wear while maintaining form, supporting reproducible results across production runs. Practical format that fits workshop workflows With a 10.97 mm nominal diameter and 50 mm length, this single gauge pin is designed for accessibility into moderate recesses and alignment tasks. The workshop version prioritises ease of handling and resistance to knocks, making it suitable for routine in‑process checks on milling and turning centres. Supplied in a protective case, the component remains transport-safe between bench and machine, reducing downtime due to damaged gauges and simplifying storage logistics on a crowded shop floor. Direct applicability and procurement confidence As a straightforward, low‑complexity measuring element, the pin integrates into existing inspection routines without additional systems. Its classification within the micro range (10–100 mm) denotes an excellent compromise between reach and stiffness for precision small‑part work. Ordering through Metav Werkzeuge provides supply reliability from the European Emmerich hub and access to product advice if special variants or matched sets are required, enabling fast replenishment and minimal interruption to production. For technical advice or to secure supply of this Metav IndustryLine gauge pin (M323.A97) directly from Metav Werkzeuge in Emmerich, contact our team for tailored recommendations and prompt delivery. Technical data Article number: M323.A97 GTIN: 4061905064845 SKU: M323.A97 Material: special steel Nominal diameter: 10.97 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Facts Category: Gauge pin Version: single pin, workshop execution Measurement range classification: Micro (10–100 mm) Intended use: end measurements, go/no‑go checks, alignment Special features Supplied in protective case for transport Robust workshop finish Suitable for repetitive production checks FAQ What degree of precision does the gauge pin offer? The gauge pin delivers a tolerance of ±0.002 mm, which is indicated for tight end‑measure checks and reliable go/no‑go control in production. Is the pin suitable for use in a production workshop environment? Yes; the workshop execution and special steel construction make the pin durable for routine in‑process inspection and handling on shop floors. Can this gauge pin be used for alignment and seating checks? The 10.97 mm diameter and 50 mm length are appropriate for alignment tasks and seating verifications where a compact, stiff reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.98mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of ±0.002 mm tolerance, robust Special steel construction and a compact 50 mm length for repeatable go/no‑go checks; order the pin directly via Metav Werkzeuge or consult the team for application advice. Gauge pin M323.A98 — single test pin, 10.98 mm diameter (Metav IndustryLine) The gauge pin M323.A98 is a single test pin designed for precise end‑measurement and fit checks in workshop environments; a compact solution for small‑format inspection tasks. Workshop version for robust daily use Tolerance ±0.002 mm for repeatable checks 10.98 mm diameter for end‑measurement applications Supplied in a protective case for transport Precision for small‑format inspection and reliable go/no‑go checks This compact gauge pin has a nominal diameter of 10.98 mm and a verified manufacturing tolerance of ±0.002 mm, which positions it firmly in the micro class of measuring pins (ideal for measurement ranges up to 100 mm). The narrow diameter and tight tolerance make this component suitable for end‑measurement tasks and plug‑gauge comparisons where repeatability is essential. By choosing a pin with this accuracy, production and QC routines benefit from clear, reproducible results that reduce the need for secondary checks and minimise scrap rates. Built for workshop use with secure handling and transport Constructed from Special steel, the pin is finished to withstand everyday workshop conditions while retaining its measuring geometry. At a length of 50 mm, the pin combines sufficient engagement depth with easy handling; the workshop version designation emphasises durability and straightforward use during assembly, set‑up or incoming inspection. The unit is supplied in a protective case to secure the datum surface during transport — practical for workshop logistics and field work without implying long‑term storage suitability. Faster inspection cycles and simplified fit validation With its narrow tolerance band and compact design, this test pin supports efficient go/no‑go and fit checks in fixtures, jigs and assembly verifications. The precise diameter reduces uncertainty when checking bore fits and end measurements, contributing to faster decision cycles on the shop floor and fewer stoppages for rework. Combined with Metav’s supply chain reliability, the component helps maintain steady throughput by ensuring measuring aids are available when needed. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine M323.A98 gauge pin into existing inspection routines and to arrange supply from Emmerich with dependable delivery and stock assurance Technical data SKU: M323.A98 GTIN: 4061905064852 ECLASS: 21170231 Core specifications Diameter: 10.98 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Features Material: Special steel Version: Workshop version Delivery: Protective case for transport Intended use: end measurements Category: Gauge pins FAQ What is the nominal diameter and tolerance of the pin? The Metav IndustryLine M323.A98 gauge pin has a nominal diameter of 10.98 mm and a manufacturing tolerance of ±0.002 mm. Is the pin suitable for end‑measurement and plug‑gauge checks? Yes. The design and tolerance of the M323.A98 make it suitable for end‑measurement tasks and fit validation in fixtures where compact, repeatable measurement elements are required. How is the pin delivered and handled for transport? The pin is supplied in a protective case to safeguard the measuring faces during transport; the case is intended for transport protection rather than long‑term storage. Which material is used for the pin and what does that mean for workshop use? Manufactured from Special steel, the pin offers a balance of hardness and toughness suitable for routine workshop inspection and handling. Can the M323.A98 be used directly in production jigs and fixtures? Yes. The compact length (50 mm) and tight tolerance support direct use in jigs and fixtures for go/no‑go checks and end‑dimension verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.99mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of the combination of high repeatability, tight tolerance (±0.002 mm) and compact handling for reliable in‑process checks; order the gauge pin directly via Metav Werkzeuge or consult Metav’s specialists for application advice. Gauge pin, single — 10.99 mm diameter, 50 mm length (Metav IndustryLine) Gauge pin M323.A99 provides a compact solution for end‑dimension checks and assembly verification in precision workshops and inspection benches. Workshop-grade construction Diameter controlled to ±0.002 mm Single piece for individual inspection tasks Consistent, traceable measurements for small bores The 10.99 mm diameter pin is manufactured for reproducible checking of end dimensions and small bore clearances, delivering a tolerance of ±0.002 mm that supports reliable go/no‑go assessments and fine inspection tasks. As a precision measuring element, the pin minimises cumulative measurement uncertainty when used in comparative setups or alongside gauge blocks. This level of control reduces rework rates and secures process stability in serial checking. Robust workshop construction with precise handling Built in a workshop‑grade execution from special steel, the pin balances wear resistance and dimensional stability across repeated insertions. The 50 mm overall length provides adequate reach for many component depths while remaining easy to guide by hand or fixture, and the modest mass (approx. 0.1 kg) helps to avoid inadvertent deflection during manual checks. The single‑piece supply format is suitable for dedicated test benches and simplifies inventory management for small‑batch quality control. Easy integration into quality routines and documentation Designed for straightforward incorporation into standard inspection procedures, the measuring pin complements plug and ring gauge sets or custom jigs for repeat inspections. Clear item identification and the compact form factor enable fast deployment on control plans and audit checklists. When traceability is required, the pin’s consistent geometry supports stable reference readings, helping to maintain documentation continuity across shifts and operators. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine gauge pin M323.A99 can be matched to existing inspection fixtures or to request specialist advice on implementing it into production control. Technical data Article number: M323.A99 GTIN: 4061905065590 Label: Gauge pin, single, 10.99 mm, length 50 mm Manufacturer: Metav IndustryLine Facts Diameter: 10.99 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Workshop execution Material: special steel Supplied individually Application: end‑dimension checks FAQ What is the exact diameter and tolerance of the pin? The gauge pin has a diameter of 10.99 mm with a manufacturing tolerance of ±0.002 mm, specified for precise end‑dimension checks. Is this pin suitable for use in small‑bore inspection fixtures? Yes, the design and 50 mm length of the gauge pin make it suitable for small‑bore fixtures and many bench inspection setups, supporting consistent engagement and repeatable readings. Can this pin be used as a reference for go/no‑go assessments? The pin’s tight tolerance and stable geometry mean it can be used as a reference element in go/no‑go routines and comparative checks when documented in the inspection plan. How is the gauge pin supplied and identified? The item is supplied individually under the article number M323.A99 and GTIN 4061905065590, facilitating clear identification in stock and inspection records. Which material is the pin made from and what does that mean for durability? Manufactured from special steel, the pin offers enhanced surface endurance and dimensional stability for repeated mechanical engagement in workshop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Test Pin Single, ±0.001mm Accuracy, Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of precise end‑dimension verification combined with robust workshop construction and consistent repeatability; the 10.00 mm diameter with ±0.001 mm tolerance ensures tight fits and reliable inspection results. Order the gauge pin directly via Metav Werkzeuge or consult the team for application advice. M323.000 Test pin – gauge pin, 10.00 mm, ±0.001 mm (Metav IndustryLine) The M323.000 test pin is a workshop‑grade precision gauge pin intended for end‑dimension checks, fixture alignment and general inspection tasks in industrial metrology. Workshop‑grade precision pin Diameter 10.00 mm with ±0.001 mm tolerance Special steel construction, length 50 mm Consistent dimensional accuracy for inspection The M323.000 is specified for a 10.00 mm nominal diameter with a tight ±0.001 mm deviation, making it suitable where minute dimensional conformity is decisive. Such accuracy reduces uncertainty during go/no‑go assessments and supports faster decision‑making on production lines. The clear numeric specification provides a verifiable basis for tolerance stacks and inspection reports, helping to cut rework and to document compliance with drawing requirements. Robust workshop design for repeated use Constructed from special steel and offered as a workshop‑grade item, the pin combines durability with a manageable 50 mm length that balances reach and stiffness. The chosen material and compact geometry provide resistance to wear in routine use while keeping handling straightforward during fixture insertion. This combination supports long service life under typical workshop conditions and maintains precision across repeated cycles without complex maintenance. Easy integration into inspection and tooling routines As a single‑item gauge pin with a compact profile, the component fits into fixture bores, counter‑gauges and alignment procedures where reliable reference dimensions are required. The clearly defined numeric attributes enable straightforward procurement and inventory coding for quality departments. Metav IndustryLine’s focus on accessible precision ensures that this gauge pin can be adopted across workshops and inspection benches, supporting consistent measurement routines and traceable part verification. Contact Metav Werkzeuge for tailored advice on integrating the M323.000 test pin into existing inspection processes or to request a technical datasheet via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.000 GTIN: 4061905056017 Brand: Metav IndustryLine Designation: Test pin, single Core data Diameter: 10.00 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.033 kg Special features Material: Special steel Workshop version Eclass: 21170231 Packaging: single item FAQ What tolerance does this gauge pin offer? The M323.000 test pin from Metav IndustryLine is specified with a tolerance of ±0.001 mm. What are the physical dimensions of the pin? Diameter 10.00 mm and length 50 mm; weight 0.033 kg are the nominal dimensions for the M323.000 gauge pin. Which material is used for the pin? The M323.000 is manufactured from special steel and designed for repeated workshop use. Where is this gauge pin typically applied? The M323.000 is intended for end‑dimension checks, alignment in fixtures and precision inspection tasks across general metrology and workshop inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10–11mm Gauge Pin Set With Holder 0.01mm Increment, Supplied In Case - Metav IndustryLine
Take advantage of 0.01 mm diameter steps and an accurate ±0.004 mm tolerance in a matched 101-piece range for consistent fit checks; supplied with a pin holder and a transport case for immediate workshop use. Order the gauge pin set directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin set – 10–11 mm range, 0.01 mm increments by Metav IndustryLine Gauge pin set for precision diameter verification and fit checking in quality control, toolmaking and inspection tasks Precise 0.01 mm diameter steps Complete 101-piece matched set Supplied with pin holder and transport case Special steel for dimensional stability Precision that speeds up quality decisions The matched 101-piece set delivers continuous diameter coverage across the 10–11 mm band with 0.01 mm increments, enabling rapid selection of the correct gauge for tolerance checks. With an indicated accuracy of ±0.004 mm, this assortment supports reliable pass/fail assessments and reduces uncertainty during incoming inspection or final control. The fine step size simplifies iterative adjustments on assembly lines and shortens decision cycles in the workshop. Ready-to-use kit for improved workflow efficiency Delivered as a complete kit, the set includes a dedicated pin holder and a protective transport case, so the collection remains organised and ready at the bench. The compact layout of the pins minimises handling time when comparing diameters or performing sequential measurements, which translates into measurable time savings during batch testing. The matched pairings reduce the need for supplemental gauges and speed up traceable inspection procedures. Material choice for stable dimensions over time Manufactured from special steel, the pins are designed for dimensional stability and consistent contact geometry under regular use. The material selection and production tolerances ensure long-term repeatability, which is essential when the same reference pins are used across multiple inspection stations. Clear marking and matched sizing help maintain a documented chain of measurement when integrating the set into quality management systems. Suited to shopfloor inspection and precision workshops This gauge assortment is suitable for fit testing, diameter verification and reference measurements in production and metrology settings. The fine gradation and matched manufacturing minimise interpolation errors when determining the best-fit pin, supporting efficient troubleshooting and setup work. Where repeatability and quick throughput matter, the set provides a practical balance between range and handling convenience. Contact Metav Werkzeuge to secure the Metav IndustryLine gauge pin set, complete with pin holder and transport case, for immediate integration into inspection routines. Technical data SKU: M318.580 GTIN: 4054469156170 Manufacturer: Metav IndustryLine Core data Pieces per set: 101 Diameter range: 10.0–11.0 mm Increment / step: 0.01 mm Accuracy: ±0.004 mm Pin length: 50 mm Weight: 6.6 kg Special features Material: special steel Includes: pin holder Delivery: transport case included Tariff number: 90173000 Set type: matched 101-piece set FAQ What applications are best suited to this gauge pin set? The gauge pin set is ideal for diameter verification, fit testing and component inspection in quality control, toolmaking and workshop calibration tasks. How are the pins delivered and stored? Pins are supplied as a matched 101-piece set, delivered with a pin holder and a protective transport case to keep the collection organised and portable. What is the resolution and typical accuracy of the set? The set has 0.01 mm increments with an indicated accuracy of ±0.004 mm, making it suitable for precise fit checks and repeatable reference measurements. Can these pins be used as reference standards in production? Yes; the matched manufacturing and material choice support repeatability, allowing the pins to serve as convenient reference tools within inspection workflows. Is the material specified for long-term dimensional stability? The pins are made from special steel, chosen to maintain contact geometry and dimensional stability under regular inspection use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10–20mm Gauge Pin Set 101 Pieces 0.1mm Increment With Holder, Supplied In Case - Metav IndustryLine
Take advantage of the combination of high measuring accuracy, broad coverage from 10.0–20.0 mm and robust special steel construction for reliable, repeatable inspection workflows. Order the gauge pin set directly via Metav Werkzeuge or ask our consultants if needed Gauge Pin Set M318.524 — 10.0–20.0 mm coverage, 0.1 mm increments (Metav IndustryLine) The Gauge Pin Set M318.524 is a precision inspection set designed for dimensional verification and hole gauging across the 10.0–20.0 mm range, suitable for production control and quality assurance tasks in metalworking and toolmaking Complete 10.0–20.0 mm coverage 0.1 mm increments for fine gradation Manufactured from special steel Faster inspection with reliable step coverage A comprehensive range spanning 10.0–20.0 mm in 0.1 mm increments reduces tool changes and speeds up batch inspection. The graded pins allow quick selection of the nearest nominal diameter, enabling concise go/no-go checks and incremental measurement without recalibration between sizes. For production lines and quality benches, this coverage translates into fewer interruptions and a measurable gain in throughput while maintaining consistent sampling routines. Robust construction for consistent results Made from special steel, the pins resist wear and preserve dimensional integrity under frequent use. The set delivers a stated measuring deviation of 0.004 mm, which supports tight tolerances in workshop and inspection environments. The material choice and finish ensure a stable contact surface that minimises measurement scatter; combined with correct handling, this contributes to reproducible readings and extended service life for the tools. Practical handling and integration into the workshop Designed as an inspection set rather than single-use gauges, the pins are complemented by a dedicated pin holder, easing handling and alignment during hole checks. The set’s mass and balance allow steady manual operation during repetitive inspections; the straightforward incremental system also fits into existing inspection routines and documentation workflows. For procurement, Metav IndustryLine supplies this set as a ready-to-use package for immediate inclusion in quality-control procedures. Contact Metav Werkzeuge for tailored advice on how the Metav IndustryLine gauge pin set can be integrated into inspection processes and to confirm suitability for specific production tolerances Technical Data Article number: M318.524 GTIN: 4054469156279 Tariff number: 90173000 Weight: 5.6 kg Material: Special steel Facts Measuring range: 10.0–20.0 mm Graduations: 0.1 mm Measuring deviation: 0.004 mm Pack format: set Special features With pin holder Set for incremental gauging ECLASS: 21170231 FAQ What measurement range does the set cover? The set covers the 10.0–20.0 mm range with 0.1 mm increments to allow fine-grained dimensional checks. How precise are the pins for routine inspection? The pins achieve a measuring deviation of 0.004 mm, making the Gauge Pin Set M318.524 (Metav IndustryLine) suitable for close-tolerance checks in metalworking. What material are the pins made from and why does that matter? Pins are manufactured from special steel, which provides wear resistance and consistent contact surfaces to maintain dimensional stability during repeated use. Is the set suitable for production line sampling? Yes — the graduated coverage and robust construction are intended for repeated sampling and quick go/no-go verification within routine production inspection. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
11,01- 12,00mm Messstift-Sätze, Werkstatt-Ausführung, ± 0,004 mm
- aus Spezial-Stahl Werkstatt-Ausführung, Länge 50 mm Genauigkeit < ± 0,004 mm im Behältnis/KastenTechnische Daten- Messbereich: 11,01- 12,00mm- Stufung: 0,01mm- Anzahl/Satz: 100
11,19mm Prüfstift, Länge 50 mm, Werkstatt-Ausführung, Spezial‑Stahl, mit Kiste - Metav IndustryLine
Der präzise Prüfpartner für Werkstatt und Fertigung: Nutzen Sie die Kombination aus hoher Genauigkeit, robustem Spezial‑Stahl und sicherer Transportverpackung für verlässliche Endmaßkontrollen. Bestellen Sie den Prüfstift direkt über Metav Werkzeuge oder fordern Sie technische Beratung an. Prüfstift, einzeln, 11,19 mm Länge 50 mm von Metav IndustryLine Der Prüfstift, einzeln, 11,19 mm Länge 50 mm ist ein präziser Messstift für Endmaß‑Kontrollen und Werkstattprüfungen, konzipiert für wiederholgenaue Maßprüfungen bei Montagen und Serienkontrollen. Werkstatt-Ausführung für robuste Einsätze Spezial‑Stahl für hohe Verschleißfestigkeit Präzision ±0,002 mm für Endmaßkontrollen Länge 50 mm für einfache Handhabung Lieferung in robustem Kasten für Transport Robuste Werkstoffwahl sichert Langzeitpräzision Der Prüfstift wird aus Spezial‑Stahl gefertigt, was Verschleißfestigkeit und Formstabilität kombiniert. Dank dieses Materials bleibt die Messfläche auch bei häufigem Einsatz dauerhaft erhalten, wodurch sich Stillstandszeiten für Nacharbeit verringern. Die Werkstatt‑Ausführung ist auf rauere Umgebungen ausgelegt, sodass der Prüfstift auch bei wiederholten Montagevorgängen seine Maßhaltigkeit bewahrt und konstante Prüfergebnisse liefert. Hohe Genauigkeit für zuverlässige Endmaßprüfungen Mit einer ausgewiesenen Genauigkeit ±0,002 mm eignet sich der Prüfstift gezielt für Endmaßkontrollen und Abgleichmessungen. Die kleine Messgröße ermöglicht präzise Passungsprüfungen und Maßvergleiche bei Bauteilen mit engen Toleranzen. Anwender profitieren von reproduzierbaren Ergebnissen, weil die Konstruktion verwindungsarm ist und die Schaftlänge von 50 mm eine ergonomische Handhabung erlaubt. Vielseitiger Einsatz in Fertigung und Qualitätssicherung Dieses Messmittel richtet sich an Anwender in der Fertigungsmesstechnik, im Maschinenbau und in der Serienmontage, die kompakte und belastbare Prüfinstrumente benötigen. Typische Anwendungen sind Passungsprüfungen, Prüflehren‑Ergänzungen und Stichprobenkontrollen in Produktionslinien. Durch die kompakte Bauform eignet sich der Prüfstift auch für enge Messpunkte und Innenbearbeitungsstationen. Sichere Lieferung und dokumentierte Identität Der Prüfstift wird transportgerecht in einem robusten Kasten geliefert, der Beschädigungen beim Versand reduziert und die Handhabung beim Transport erleichtert. Die Kennzeichnung mit SKU M323.B19 und GTIN 4061905064951 sorgt für nachvollziehbare Bestell- und Lagerprozesse; das übersichtliche Gewicht von 0,1 kg erleichtert die Logistikplanung. Für präzise Endmaß‑Kontrollen empfehlen wir den Prüfstift M323.B19 von Metav IndustryLine – technische Beratung und Bestellung über Metav Werkzeuge, eMail: info@metav-werkzeuge.com oder Telefon: +49 2822 7131930 Produktmerkmale Bezeichnung: Prüfstift, einzeln, 11,19 mm Länge 50 mm Artikelnummer: M323.B19 Marke: Metav IndustryLine GTIN: 4061905064951 Daten Länge: 50 mm Messbereich: 11,19 mm Gewicht: 0,1 kg Genauigkeit: ±0,002 mm Besonderheiten Werkstatt-Ausführung Material: Spezial-Stahl Kategorie: Messstifte Verpackung: Lieferung in Kasten FAQ Wie genau ist der Prüfstift im praktischen Einsatz? Der Prüfstift M323.B19 von Metav IndustryLine weist eine Genauigkeit von ±0,002 mm auf, was ihn für Endmaßkontrollen und Passungsprüfungen mit engen Toleranzen auszeichnet. Für welche Anwendungen eignet sich der Prüfstift besonders? Das Messstift‑Format ist ideal für Passungsprüfungen, Stichprobenkontrollen und den Einsatz in der Serienmontage, wo kompakte, verschleißfeste Prüfmittel benötigt werden. Aus welchem Material besteht der Prüfstift und welche Vorteile bringt das? Der Prüfstift besteht aus Spezial‑Stahl; dies bietet hohe Verschleißfestigkeit und Formstabilität, wodurch die Messflächen auch bei häufigem Einsatz dauerhaft zuverlässig bleiben. Wie wird der Prüfstift geliefert und wie erleichtert das die Handhabung? Der Prüfstift wird transportgerecht in einem robusten Kasten geliefert, der Beschädigungen beim Versand minimiert und den sicheren Transport zum Einsatzort gewährleistet. Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
11-12mm Test Pin Set 101 Pieces 0.01mm Increment With Probe Holder In Case - Metav IndustryLine
A compact inspection kit that combines fine increments with workshop robustness: 101-piece gauge pin set with 0.01 mm increments and an assessed accuracy of ±0.004 mm, supplied with a gauge pin holder and protective case. Order the set directly via Metav Werkzeuge or consult our specialists for application guidance. Gauge pin set — 101-piece, 11–12 mm range, 0.01 mm increments (Metav IndustryLine) The gauge pin set is a workshop-grade inspection kit intended for precise hole and gauge checks in mechanical and maintenance environments. 101-piece set with 0.01 mm steps High tolerance accuracy ±0.004 mm Supplied with a gauge pin holder Delivered in protective transport case Precision where measurement matters The set provides a dense gradation with 0.01 mm increments, enabling fine-tuned selection for go/no-go checks and incremental fit control. With an assessed accuracy of ±0.004 mm, the kit supports tasks that require reliable repeatability in assembly inspection and quality control. The close spacing of the pins reduces adjustment time compared with coarser sets and helps maintain consistent tolerances across batches. The benefit for the workshop is reduced rework and faster verification during setup and incoming inspections, supported by the set's clear labelling and organised layout. Designed for workshop routine and durability Manufactured from special steel, the pins resist wear and preserve dimensional integrity under frequent use. The set comprises 101 pieces, each with a nominal length of 50 mm, packed in a robust transport case that keeps the pins protected and organised between uses. The inclusion of a gauge pin holder simplifies handling during measurement, improving ergonomics and reducing the risk of accidental damage. For workshops that perform repetitive checks, the combination of material choice and protective packaging delivers longer service life and predictable behaviour under daily operational stress. Practical handling and inspection workflow Organisation and speed are central to efficient inspection. The tight incrementing and full set range between 11.00 and 12.00 mm allow immediate selection of the best-fitting pin, eliminating guesswork. Labelling and a clear layout speed up the measurement cycle, while the holder enables safer transfer of pins to fixtures or measuring benches. The set's overall weight of 7.3 kg reflects a complete kit ready for bench or mobile use; the protective case simplifies transport within production areas. This pragmatic combination of features supports shorter cycle times and consistent quality documentation. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine gauge pin set into existing inspection routines and secure this workshop-ready kit with holder and protective case Technical data SKU: M318.581 GTIN: 4054469156187 Tariff code: 90173000 Facts Measurement range: 11.00–12.00 mm Increment: 0.01 mm Assessed accuracy: 0.004 mm Pieces per set: 101 Length (nominal): 50 mm Weight: 7.3 kg Special features Material: special steel Supplied with a gauge pin holder Delivered in a protective transport case Workshop version, organised layout for fast selection FAQ What tolerance and resolution can be expected from this gauge pin set? The gauge pin set delivers a step size of 0.01 mm with an assessed accuracy of ±0.004 mm, suitable for precise fit and clearance checks. Is the set complete for the stated measurement range? Yes, the 101-piece set covers the range from 11.00 mm to 12.00 mm in 0.01 mm steps and is supplied as a complete workshop kit. What material are the pins made from and how durable are they? Pins are manufactured from special steel, chosen for wear resistance and dimensional stability under frequent use. Does the delivery include any handling aids? The set is supplied with a gauge pin holder and a protective transport case to support safer handling and organised storage. Which SKU identifies this product for ordering? This product is listed under SKU M318.581 within the Metav IndustryLine range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
11.01mm Test Pin 50mm Length Workshop Version - Metav IndustryLine
This precision test pin delivers repeatable reference measurements thanks to its 11.01 mm diameter, 50 mm length and a tight ±0.002 mm tolerance; its workshop‑grade construction and transport box ensure protected handling and long service life. Order the item directly via Metav Werkzeuge or consult the technical team for application advice. Gauge pin M323.B01 – 11.01 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin M323.B01 is a single precision test pin intended for dimensional checks and end‑measure references in workshop and inspection settings. Single gauge pin Ø 11.01 mm, length 50 mm Tolerance ±0.002 mm for high precision Made from special steel for durability Supplied in transport box, workshop version Exact reference measurements with industrial precision A compact reference element designed for repeatable inspection tasks, the gauge pin provides a reliable datum for go/no‑go checks and verification of end dimensions. The ±0.002 mm tolerance reduces measurement uncertainty and supports fast quality assessments on the shop floor, enabling confident decisions during incoming inspection or final control. As a solid, single‑piece pin, it serves as a stable contact for comparison measurements and simple fixture checks without the need for elaborate apparatus. Robust workshop design for everyday handling Built in a workshop version for practical use, the pin is manufactured from special steel to resist wear during repeated insertions and contact. The 50 mm length offers a good balance between reach and stiffness, while the compact diameter maintains contact integrity in small bores and against flat references. Supplied in a protective transport box, the component arrives ready for safe storage and transfer between benches, reducing the risk of damage that could affect dimensional stability. Practical integration into inspection routines The item functions well as a reference in fixture set‑up, end‑measure verification and comparative gauging. Its compact mass and clear dimensional specification facilitate quick incorporation into measuring jigs or simple test rigs for batch control. Traceability is supported via the listed identifiers, allowing clear inventory and auditability within a quality system. For operations that require regular, reproducible checks, the pin helps keep process tolerances tight and inspection throughput efficient. For application advice, ordering or to confirm compatibility with an existing inspection setup, contact Metav Werkzeuge in Emmerich — Metav’s specialists will advise on lead times and delivery options. Technical data Article number: M323.B01 GTIN: 4061905065613 Label: Prüfstift, einzeln, 11,01 mm Länge 50 mm Numbers / Core technical data Diameter: 11.01 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features / Versions Material: Special steel Version: Workshop execution Supply: Delivered in a transport box Single item (not in sets) Category: Gauge pins FAQ Is this gauge pin suitable for precision hole checks? The gauge pin M323.B01 is intended for dimensional reference and is suitable for many precision hole checks where a fixed‑diameter probe is applicable. What accuracy can be expected from this test pin? The product is specified with a tolerance of ±0.002 mm, which establishes its suitability for fine inspection tasks requiring high repeatability. What material is used for the pin? This gauge pin is made from special steel, chosen for wear resistance and durability in routine workshop use. Is the pin supplied ready for transport and storage? Yes, the M323.B01 is supplied in a transport box as part of the workshop execution to protect the pin during handling and storage. Can the gauge pin be integrated into existing fixtures? The compact form and standard dimensions allow the pin to be used in simple fixtures and jigs for comparative or end‑measure tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
11.02mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of precise dimensional control and robust workshop design to shorten inspection cycles and reduce rework; the combination of ±0.002 mm tolerance and special steel construction ensures reliable repeatability for end‑measure checks — order through Metav Werkzeuge or consult our specialists for tailored supply. Gage pin M323.B02 — 11.02 mm diameter, 50 mm length (Metav IndustryLine) Gage pin M323.B02 is a single inspection pin for dimensional verification and end‑measure checks in workshop and production settings. High-precision tolerance ±0.002 mm Solid special-steel construction Workshop version for robust use Diameter 11.02 mm, length 50 mm Reproducible checks with sub‑millimetre certainty The single inspection pin is manufactured to a tight ±0.002 mm tolerance, making it suitable for precise go/no‑go checks and pass/fail verifications where repeatability is essential. The small diameter of 11.02 mm combined with a stable 50 mm shank delivers a compact measurement reference that minimises deflection and contact error during routine checks. This level of reproducibility reduces inspection uncertainty, shortens setup time and lowers the risk of costly rework in small‑batch production or final inspection processes. Durable construction built for workshop routines Designed as a workshop version, the pin is made from special steel to resist wear under frequent contact and handling. The single‑piece design and compact mass (approx. 0.1 kg) aid comfortable handling and rapid placement in fixtures or jigs, while the material choice maintains geometric integrity over repeated use. For operators this translates into fewer replacements, stable results across many cycles and dependable surface condition for tactile or optical comparison methods. Practical identification and traceable use in production Marked and identified for shop‑floor use, the pin carries clear article references for inventory and quality‑assurance tracking. The compact format suits integration into fixture sets or portable inspection kits and supports fast exchanges during inline checks. With its straightforward geometry, the gage pin is compatible with standard locating bores and simple comparison setups, offering an economical means to enforce dimensional tolerances without complex equipment. For procurement and traceability, refer to M323.B02 and the Metav IndustryLine designation when specifying replacements. For workshop-grade dimensional checks, specify the Metav IndustryLine gage pin M323.B02 via Metav Werkzeuge GmbH in Emmerich — contact our team at info@metav-werkzeuge.com or +49 2822 7131930 for advice and reliable supply Technical data Article number: M323.B02 GTIN: 4061905065620 Brand: Metav IndustryLine SKU: M323.B02 Core specifications Diameter: 11.02 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Version: Workshop execution Type: Single gage pin Category: Messstifte FAQ What tolerance does this inspection pin offer? The gage pin M323.B02 is specified with a tolerance of ±0.002 mm, suitable for precise dimensional checks. Which material is used for the pin? The pin is manufactured from special steel, selected for wear resistance and dimensional stability. Is this pin suitable for use in a workshop environment? Yes, the workshop execution is intended for regular shop‑floor use and frequent handling. How is the product identified for ordering and traceability? Identification is by article number M323.B02 and GTIN 4061905065620 for inventory and procurement. Can this pin be incorporated into simple fixture checks? The single‑piece geometry and compact dimensions make it well suited to locating bores and basic fixture setups for inline inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com