Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
10.28mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Benefit from the combination of tight tolerance, special‑steel robustness and compact dimensions for consistent inspection results; order the gauge pin directly via Metav Werkzeuge or consult our specialists if additional information is required. Gauge pin M323.A28 — single 10.28 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin designed for precise end‑measure checks and reference fitting in workshop and inspection environments. Workshop version for robust daily use Diameter 10.28 mm for precise fit Tight tolerance ±0.002 mm for accurate checks Dependable accuracy for routine inspection The gauge pin offers a declared tolerance of ±0.002 mm, making it suited to tasks where repeatable dimensional control is essential. This level of accuracy supports reliable go/no‑go checks and fit verification for press fits, bore checks and reference inspections. The specification is intended to reduce uncertainty in routine testing and to simplify decision‑making in quality control processes by providing a clear, measurable standard. Compact design that simplifies handling With a diameter of 10.28 mm and a length of 50 mm, the pin combines reach with manageable geometry for single‑handed handling on the shop floor. The workshop execution emphasises robustness: surfaces are finished for consistent contact, and the overall form minimises handling errors during repeated insertions. These design choices translate into fewer setup corrections and faster inspection cycles when checking small to medium bores. Integrates smoothly into workshop metrology kits Production and maintenance teams can use this test pin as a companion to calipers and micrometres for targeted dimensional checks, where a compact reference element is required. The modest mass and standardised diameter allow straightforward pairing with gauges and fixtures, supporting quick interchangeability. Where traceable measurement chains are needed, the pin functions as a practical, stable reference for comparative checks within internal quality workflows. Quality provenance and practical benefits Manufactured from special steel and supplied as a single unit, the product reflects a focus on consistent manufacturing quality and shop resilience. The compact form factor reduces storage complexity while the declared accuracy supports confidence in routine inspections. Metav’s role as a precision partner further ensures that the product reaches European customers with quality control filters applied at the distribution centre in Emmerich, underlining supply reliability and long‑term availability. Contact Metav Werkzeuge today to secure Metav IndustryLine inspection pins such as the M323.A28; expert advice and order support are available at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: M323.A28 GTIN: 4061905064258 Category: Gauge pins Label: Single gauge pin, 10.28 mm diameter, 50 mm length Facts Diameter: 10.28 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop execution for daily use Supplied as a single test pin FAQ What tolerance does this gauge pin offer? The M323.A28 gauge pin is specified with a tolerance of ±0.002 mm, suitable for precise fit and inspection tasks. Is the pin intended for workshop environments? Yes, the product is a workshop execution designed for robust daily use and repeated inspection cycles. Can this pin be used for bore‑fit verification? The 10.28 mm diameter and precise tolerance make the pin appropriate for bore‑fit checks, reference fitting and comparative inspections. What material is the pin made from? The gauge pin is made from special steel, selected for stability and wear resistance in routine metrology tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.29mm Test Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of precise, workshop-grade measuring with a compact 10.29 mm diameter and a measured tolerance of ±0.002 mm, ensuring reliable repeatability in production checks; order directly through Metav Werkzeuge or consult our experts for specification matching. M323.A29 gauge pin — 10.29 mm diameter × 50 mm length, precision ±0.002 mm (Metav IndustryLine) A M323.A29 gauge pin designed for accurate end‑measurements and fixture checks in workshop and quality‑control environments Workshop‑grade special steel construction Diameter 10.29 mm, length 50 mm High repeatability with ±0.002 mm tolerance Precision that reduces rework and speeds inspection The compact design and the ±0.002 mm specification deliver measurable gains in process reliability. Built for fine measurement tasks, this gauge pin combines a controlled diameter of 10.29 mm with a short 50 mm length to reduce flex and vibration during use. The result is consistent positional reference and improved repeatability, which helps to cut down rework and minimise downtime in serial checks or assembly verification. Robust workshop construction for everyday handling Manufactured from special steel and executed as a workshop‑grade component, the pin tolerates regular handling on the shop floor without losing form. The short measuring length increases rigidity and simplifies single‑handed placement in fixtures or nests. This durability translates to longer service life and stable performance in typical machine‑shop and assembly applications where quick, reliable checks are required. Practical integration into inspection routines As a standard inspection element, the pin is suitable for quick go/no‑go checks, alignment aids and fixture set‑up. The declared accuracy of ±0.002 mm corresponds to a maximum deviation of 2 micrometres, allowing the pin to function as a trustworthy reference in both manual and semi‑automated measuring tasks. Traceable identifiers such as GTIN and SKU support inventory control and procurement workflows. Procurement and inventory benefits for quality teams Compact and lightweight, the pin is easily stored and handled across workshop zones; its nominal weight of 0.1 kg aids logistic planning. The nominal dimensions and clear technical specification make it straightforward to specify in bills of materials or replacement lists. For tailored lot sizes or compatibility checks with existing gauges, Metav Werkzeuge provides procurement support and data sheets on request. Contact Metav Werkzeuge to secure the M323.A29 for your inspection routine or to request application advice from our precision consultants in Emmerich Technical data Article number: M323.A29 GTIN: 4061905064265 SKU: M323.A29 Core measurements Diameter: 10.29 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Design: workshop execution Category: gauge pin for inspection FAQ What level of accuracy can be expected from this gauge pin? The M323.A29 gauge pin is specified to ±0.002 mm, corresponding to a maximum deviation of 2 micrometres under normal use. Is the pin suitable for precision fixture set‑ups? Yes; the short 50 mm length and 10.29 mm diameter provide good rigidity, making the pin suitable for fixture alignment and repeatable positioning tasks. Which material is used and what are the handling benefits? Made from special steel, the pin offers workshop durability and resistance to routine handling, supporting stable measurements over time. Can the pin be used for go/no‑go checks in production? The declared tolerance and robust design make the M323.A29 appropriate for rapid go/no‑go and comparative checks inside manufacturing and assembly processes. How is the product identified for procurement? Identification is available via SKU M323.A29 and GTIN 4061905064265 for straightforward ordering and inventory management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.2mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of high precision (±0.002 mm), a compact 10.2 mm diameter and a robust special steel construction for consistently reproducible end‑dimension checks; order this test pin directly via Metav Werkzeuge or contact their consultants for further advice. Test Pin M323.A20 – precision gage pin, 10.2 mm Ø, 50 mm length (Metav IndustryLine) The Test Pin M323.A20 is a single precision gage pin designed for end‑dimension checks and alignment tasks in workshop metrology. Precision diameter 10.2 mm Length 50 mm for deep reach High‑accuracy ±0.002 mm Workshop version, robust finish Reliable control for end‑dimension measurements This single gage pin is engineered for repeatable end‑dimension checks where tight tolerances matter. With a diameter of 10.2 mm and a length of 50 mm, the component combines compact form with sufficient reach for common workshop tasks. The specified accuracy of ±0.002 mm places it in the high‑precision category for gage pins, enabling consistent verification of fits, plug gauges and end faces. The construction supports stable contact and reduced measurement scatter, which helps maintain process reliability in small‑part inspection. Built to withstand workshop routines Produced in special steel and offered in a workshop version, this gage pin is designed for frequent handling and everyday use. The material choice balances wear resistance with corrosion protection, so the pin retains its geometry under repeated seating and extraction. Supplied as a single unit and packaged in a transport box for safe delivery, the item is easy to store and move between workstations. The compact mass and robust finish support quick insertion and handling during assembly checks or gaging operations, reducing downtime between measurements. Practical fit for metrology and end‑of‑line checks Classified in the micro range (measuring span around 10 mm), this precision pin suits applications in toolmaking, small‑component assembly and quality control where space and access are limited. The single‑piece design simplifies traceability and inventory management in a metrology kit. Where traceable calibration is required, Metav can advise on calibration options and certificates; otherwise the pin serves as a reliable reference for go/no‑go assessments and alignment tasks. The compact form and tight tolerance make the pin a practical component in both manual inspection benches and semi‑automated verification setups. Choose the Metav IndustryLine test pin for dependable end‑dimension control and contact Metav Werkzeuge for procurement or technical clarification: Metav Werkzeuge GmbH, Parkring 45, Emmerich. Technical Data Article number: M323.A20 GTIN: 4061905062872 Manufacturer: Metav IndustryLine Facts Diameter: 10.2 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Measuring range (max): 10.2 mm Special features Material: special steel Workshop version (robust finish) Delivery in transport box Category: gage pin / test pin FAQ What is the measurement tolerance of the test pin? The Test Pin M323.A20 has a declared tolerance of ±0.002 mm, suitable for high‑precision end‑dimension checks. Which material is used for the pin? The pin is manufactured from special steel for a balance of wear resistance and durability in workshop applications. Is the pin supplied in protective packaging? Yes, the test pin is delivered in a transport box to protect the item during shipment and handling. For which applications is this gage pin intended? This precision pin is intended for end‑dimension verification, alignment tasks and go/no‑go assessments in toolmaking and small‑part inspection. Can a calibration certificate be provided? If traceable calibration is required, Metav Werkzeuge can advise on available calibration services and certificates for the Test Pin M323.A20. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.32mm Gauge Pin Length 50mm Workshop Finish, Special Steel - Metav IndustryLine
Benefit from the combination of precise ±0.002 mm tolerance, robust special steel construction and a compact 50 mm length for reliable end‑measure checks; order the gauge pin directly via Metav Werkzeuge or contact our consultants for tailored advice. Gauge pin, single — 10.32 mm Ø, 50 mm length (Metav IndustryLine) The gauge pin, single — 10.32 mm Ø, 50 mm length is a workshop‑grade precision pin for end‑measure verification and fixture checks in production and inspection environments. Workshop version for tough environments Diameter specified as 10.32 mm Tolerance ±0.002 mm for precise control Supplied in a transport case Reliable precision for routine inspection The gauge pin delivers a documented tolerance of ±0.002 mm, ensuring consistent dimensional references when checking end‑sizes and clearance fits. This level of repeatability supports tighter process control and reduces rework by providing a verifiable reference for plug seats, bores and assembly jigs. Classified in the micro range, the compact diameter and short shank make the pin especially suited to precise checks on small components where stiffness and minimal deflection are decisive. Built for workshop use and easy handling Constructed from special steel and presented in a workshop version, the pin resists routine handling and transport stress while retaining measurement integrity. The 50 mm shank length offers a balance between reach and rigidity; at approximately 0.1 kg the component is simple to position by hand or in lightweight holders. Supplied in a transport case, the pin arrives protected for storage and movement between bench and machine, reducing the risk of surface damage that would affect accuracy. Practical integration into inspection routines Compatibility with standard plug‑gauge fixtures and reference stacks makes the pin straightforward to introduce into existing inspection workflows. Marked by its clear specification and compact form, the item identified as M323.A32 is ideal for end‑measure tasks, first article inspection and fixture verification. Metav IndustryLine’s workshop focus means the component supports daily production work without adding complexity to handling or documentation. For workshop‑grade end‑measure reliability, request the Metav IndustryLine gauge pin (M323.A32) from Metav Werkzeuge — Metav’s Emmerich team can advise on fitment, delivery and suitable inspection workflows. Technical Data SKU: M323.A32 GTIN: 4061905064685 Label: Prüfstift, einzeln, 10,32 mm Länge 50 mm Facts Nominal diameter: 10.32 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop version Supplied in transport case Category: Messstifte FAQ What is the nominal diameter of the gauge pin? The nominal diameter is 10.32 mm as specified for the Metav IndustryLine gauge pin (M323.A32). Is a calibration certificate included with delivery? The product data does not indicate an ISO 17025 calibration certificate; calibration is not stated as included by default. What applications suit this gauge pin best? The pin is suitable for end‑measure checks, plug‑gauge references, fixture verification and first article inspection in workshop and production settings. How does the workshop version benefit daily use? The workshop version provides enhanced durability and handling resilience, and the supplied transport case reduces the risk of damage during routine movement or storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.33mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of precise control and robust workshop handling with this compact gauge pin: ±0.002 mm positional accuracy and special steel construction ensure reliable fit checks and repetitive measurements. Order directly via Metav Werkzeuge or consult our specialists for application guidance. Gauge pin, single — 10.33 mm Ø, 50 mm length (Metav IndustryLine) The gauge pin, single, 10.33 mm Ø, 50 mm length serves as a workshop‑grade reference pin for end‑measure checks, fit verification and assembly inspection in production and maintenance environments ±0.002 mm accuracy for repeatable checks Special steel construction for wear resistance 50 mm length for compact fixture use Workshop‑grade finish for everyday handling Reduce rejects with micrometric accuracy High recurring quality demands hinge on measurement certainty. The gauge pin M323.A33 delivers ±0.002 mm tolerance, which translates into significantly fewer false rejects and more consistent go/no‑go outcomes on mating parts. By converting a raw fit or bore check into a quantifiable result, the pin supports process stabilisation and reduces rework cycles. The numerical tolerance is easy to integrate into quality documentation and helps maintain traceable inspection records. Built for everyday workshop use and quick handling A tool that stays in service must withstand frequent handling. The workshop version of this reference pin combines a compact 50 mm length with a robust finish to resist surface damage during routine checks. The single‑piece supply and straightforward geometry make the item immediately usable at the bench or in a fixture, speeding up inspection steps without additional tooling. The solid construction promotes confident handling and predictable contact behaviour during repeated measurements. Seamless fit into inspection and assembly routines The simple cylindrical design facilitates rapid alignment into bores, jigs and gauges, supporting both manual and semi‑automated procedures. With a nominal diameter of 10.33 mm, the pin is suited to standard fit tests and end‑of‑line verification tasks where dimensional conformity must be proven quickly. The tool’s predictable geometry eases documentation of check results and allows for direct comparison with technical drawings or control plans. Material choice and long‑term reliability Manufactured from special steel, the pin balances surface hardness with dimensional stability to resist wear over many cycles. The material selection reduces the need for frequent replacement and preserves the pin’s original tolerance window in daily use. Where traceability is required, the supplied SKU and GTIN facilitate inventory control and calibration scheduling within maintenance plans. Speak with Metav Werkzeuge about integrating the 10.33 mm gauge pin into the workshop toolkit; our Emmerich team can advise on stock availability and suitable inspection workflows Technical data Article number: M323.A33 GTIN: 4061905064692 Manufacturer: Metav IndustryLine Facts Diameter: 10.33 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Special steel construction Workshop‑grade finish Single item delivery Category: gauge pins FAQ What tolerances can be expected from this gauge pin? The gauge pin M323.A33 is specified with an accuracy of ±0.002 mm, making it suitable for repeatable fit and bore checks in workshop environments. Is the pin suitable for fixture and jig checks? Yes, the 10.33 mm diameter and 50 mm length make the pin appropriate for use in fixtures and jigs where compact, repeatable reference elements are required. Which material is used for the pin and what are the benefits? The pin is made from special steel, offering a balance of wear resistance and dimensional stability for routine inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.34mm Gauge Pin, Workshop Version, 50mm Length - Metav IndustryLine
Precise, compact and workshop‑rated: the combination of ±0.002 mm accuracy, a 10.34 mm diameter and a 50 mm length ensures repeatable end‑measure checks and tight‑fit verification. Order this gauge pin directly via Metav Werkzeuge or ask our consultants for specification advice. Gauge pin, single Ø 10.34 mm — 50 mm length (Metav IndustryLine) Gauge pin, single, 10.34 mm, length 50 mm is a compact inspection pin designed for fast end‑measure verification and tight‑fit checking in workshop and inspection tasks. Workshop‑grade construction Diameter 10.34 mm for tight fits Length 50 mm for shallow bores High accuracy ±0.002 mm Repeatable accuracy for small components This compact inspection pin is designed for applications where repeatability and tight tolerances matter. With an indicated accuracy of ±0.002 mm, the part suits fine measurement tasks and inspection routines that demand minimal deviation. Classified in the micro range (measurement span around 10–100 mm), it benefits from a short gauge length that reduces bending and operator‑induced error. The use of special steel provides a hard-wearing contact surface that supports consistent results over many cycles, translating into fewer rechecks and a more efficient quality workflow. Practical benefits on the shop floor The workshop version construction prioritises robustness and straightforward handling. At 50 mm overall length and 10.34 mm diameter, the pin is easy to position in shallow bores, end faces or assembly checks without excess overhang. The solid geometry makes the component suitable for stack gauges, go/no‑go fixtures and manual inspection sets, delivering a fast and reliable feel during tactile checks. Because the design is intentionally compact, set‑up time is reduced and inspection steps can be carried out with greater rhythm—helping to keep production throughput steady. Material choice and handling guidance Manufactured from special steel, the pin offers a balance between hardness and corrosion resistance typical for workshop inspection tools. Routine care—wiping clean after use and avoiding prolonged exposure to moisture—preserves the reference surface and dimensional stability. The compact mass and geometry also simplify integration into inspection racks and gauge sets, permitting clear organisation of measurement equipment and easing traceability of individual items in a metrology cabinet or inspection station. Why this specification works for industry The combination of small diameter, short length and fine accuracy is ideal for end‑measure checks on precision parts, mating features and plug gauges where reproducible limits are required. As a product from Metav IndustryLine, the component is part of an offering that focuses on practical, reliable metrology for workshops and the supply chain. The technical specification supports efficient quality control loops: faster checks, less rework and a predictable contribution to overall process capability. Choose Metav IndustryLine gauge pins from Metav Werkzeuge for reliable inspection results — contact Metav Werkzeuge for product advice and order support. Technical data SKU: M323.A34 GTIN: 4061905064708 Facts Diameter: 10.34 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop version Category: Gauge pin Label: Prüfstift, einzeln, 10,34 mm Länge 50 mm FAQ What tolerance does the pin offer? The specified tolerance is ±0.002 mm for this gauge pin (SKU M323.A34), suitable for tight inspection limits. Which applications is this pin suited for? The pin is intended for end‑measure verification, tight‑fit checks and use in plug‑gauge fixtures on the shop floor. What material is used and how should it be cared for? The pin is made from special steel; normal care is recommended—keep clean and dry to preserve the reference surfaces. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.35mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of precision and workshop-ready robustness: the M323.A35 gauge pin combines a 10.35 mm diameter with a fine ±0.002 mm tolerance and a 50 mm length to deliver repeatable end‑dimension checks. Order the inspection pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.A35 — single gauge pin, 10.35 mm diameter, 50 mm length (Metav IndustryLine) A Gauge pin M323.A35 designed for reliable end‑dimension inspection and workshop measurement tasks, ideal for bore verification and fixture checks. Workshop-grade inspection pin Diameter 10.35 mm ±0.002 mm tolerance 50 mm length for deeper checks Special steel, robust and wear‑resistant Repeatable measurements through fine tolerance and controlled geometry The M323.A35 is engineered to provide consistent results in routine inspection tasks by combining a precisely ground shaft with a narrow tolerance of ±0.002 mm. This level of accuracy reduces measurement scatter and shortens inspection cycles in production control, because fewer rechecks are required when reference pins maintain dimensional stability. The 10.35 mm diameter is specified to match nominal bore checks and plug‑gauge applications, enabling straightforward integration into Go/No‑Go fixtures or comparative gauge sets. Emphasis is placed on repeatability and measurable performance rather than subjective claims. Robust workshop execution that keeps inspections on schedule Built in a workshop configuration from special steel, this single inspection pin is prepared for the demands of everyday shop use. The solid 50 mm shaft length allows secure seating in deeper bores and supports stable handling during manual checks. Surface hardness and wear resistance ensure long service life under regular contact, which lowers tool replacement frequency and contributes to sustained production uptime. A protective transport case is provided to preserve the gauge pin during storage and shipment, reducing the risk of nicks or contamination that would otherwise affect measurement quality. Clear identification and simple integration into inspection routines Identification is straightforward: the item is listed as M323.A35, allowing unambiguous ordering and stock control, and it carries GTIN 4061905065385 for traceable logistics. Supplied as a single inspection pin, it suits applications focused on end‑dimension verification, alignment, and fixture testing. At approximately 0.1 kg, the component is easy to handle and to include in inspection kits. For workshop managers and metrology technicians, the combination of defined geometry and robust material supports quick decision‑making when matching gauges to inspection tasks. Contact Metav Werkzeuge today to request the M323.A35 gauge pin with protective case and receive tailored advice on its suitability for specific inspection setups Technical data Article number: M323.A35 GTIN: 4061905065385 Brand: Metav IndustryLine Product: Single gauge pin Facts Diameter: 10.35 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop execution Delivered in a protective case for transport Single item supply Intended for end‑dimension inspection FAQ What diameter and accuracy does the gauge pin offer? The M323.A35 gauge pin has a diameter of 10.35 mm and a stated tolerance of ±0.002 mm for precise end‑dimension checks. Is the gauge pin supplied with a calibration certificate? Calibration status is not specified in the product data; the M323.A35 is supplied as a single inspection pin and any calibration requirements should be requested from Metav Werkzeuge prior to purchase. Which inspection tasks is this pin suitable for? The pin is intended for end‑dimension verification, bore checks, alignment and fixture testing in workshop environments; the robust design suits frequent use. How is the item packaged for delivery? The M323.A35 is supplied in a protective case suitable for transport to preserve the measuring surface and prevent damage during handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.3mm Gauge Pin Length 50mm Workshop Version, Special Steel Case - Metav IndustryLine
Take advantage of precise reference dimensions, robust workshop construction and tight manufacturing tolerances for consistent end‑measure checks; order the part directly via Metav Werkzeuge or request guidance from their consultants. Gauge pin, single — 10.3 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin, single is a compact inspection pin designed for direct use in workshop measurement tasks and reference checks where a fixed diameter and short length are required. Workshop-grade construction Precision Ø 10.3 mm × 50 mm Tolerance ±0.002 mm Reliable reference for repeatable measurements A short, solid inspection pin offers a stable reference that reduces measurement variation. Manufactured in special steel and finished to tight tolerances, this pin provides a reproducible datum for end‑measure verification and reference fitting. The combination of Ø 10.3 mm and a 50 mm nominal length yields a compact geometry that resists bending during handling, so routine checks and set‑ups remain fast and consistent. The specified ±0.002 mm variation reflects manufacturing control that supports medium‑to‑high precision workshop tasks without the need for elaborate fixturing. Built for daily workshop use and handling comfort The workshop design emphasises durability and straightforward handling. The compact length and mass create a low moment of inertia during manual placement, improving ease of use on benches and in gauging fixtures. The special steel construction resists abrasion from repeated insertion into tapped bores or alignment jigs, and the single‑piece supply simplifies inventory for line inspection. Traceable identification (GTIN available) allows this inspection pin to be integrated into stock and process documentation, ensuring consistent reuse across batches and operators. Practical integration into inspection processes As a single‑item inspection tool, the pin is suited to quick go/no‑go fits, alignment aids and end‑measure spot checks in production and quality control. Its compact dimensions make it useful where space is limited or where multiple pins are kept at the inspection station for rapid changeover. Using such a fixed‑diameter reference reduces setup time and helps standardise measurement routines, which in turn supports reproducible quality outcomes and fewer measurement‑related stoppages on the shop floor. For workshop‑grade precision and reliable reference performance, contact Metav Werkzeuge for availability and technical advice on the Metav IndustryLine gauge pin Technical data SKU: M323.A30 GTIN: 4061905064272 Brand: Metav IndustryLine Article: Gauge pin, single, Ø 10.3 mm × 50 mm Facts Diameter: 10.3 mm Length: 50 mm Mass: 0.1 kg Manufacturing tolerance: ±0.002 mm Special features Material: special steel Workshop version Single item supply FAQ What tolerance can be expected from this gauge pin? The gauge pin is produced with a manufacturing tolerance of ±0.002 mm, suitable for repeatable workshop reference measurements and quality checks. Which materials is the pin appropriate for when used as a reference in gauging operations? The Metav IndustryLine gauge pin is made from special steel and is intended as a dimensional reference; it is suitable for use with workpieces of common workshop materials during alignment and fit checks. Is this pin supplied individually or as a set? This item is supplied as a single inspection pin (SKU M323.A30) for straightforward integration into existing gauging stations. Can the pin be used for end‑measure verification on small components? Yes, the compact 50 mm length and precise Ø 10.3 mm diameter make it well suited to end‑measure verification and reference fits on small to medium components. How does the gauge pin support faster inspection routines? A fixed‑diameter reference reduces setup and alignment time, enabling quicker go/no‑go checks and repeatable positioning, which streamlines routine inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.41mm Gauge Pin Length 50mm Workshop Finish, Special Steel - Metav IndustryLine
Take advantage of the combination of ±0.002 mm manufacturing accuracy, robust special steel construction and a compact 50 mm length to ensure repeatable end‑measure checks and fixture alignment; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single, 10.41 mm diameter – 50 mm length (Metav IndustryLine) The gauge pin, single, 10.41 mm, length 50 mm is a workshop‑grade reference pin designed for precise end‑measure verification and fixture positioning in production and inspection environments Workshop-grade precision ±0.002 mm tolerance Solid special-steel construction for durability Reference diameter precisely 10.41 mm Compact 50 mm length for fixture and end-position checks Consistent reference measurements for faster setup Manufactured to a tight ±0.002 mm tolerance, this precision gauge pin provides a stable reference for repeatable measurements and quick fixture set‑up. The nominal 10.41 mm diameter is produced under controlled conditions to reduce runout and assure interchangeability in jigs and checking fixtures, which shortens process stabilisation time and lowers scrap rates. The compact form factor keeps handling simple while maintaining the rigidity required for reliable contact measurement. Practical workshop use and application scenarios Built as a workshop‑grade reference pin, the component suits everyday tasks: end‑position checks, datum establishment, alignment of mating parts and use as a reference in assembly aids. The short 50 mm length gives good access in confined set‑ups without sacrificing control during placement. Thanks to its balanced mass (approx. 0.1 kg), it is easy to handle for manual inspection routines and small series production where quick checks are frequent and traceable results are required. Durable construction and traceable identification The pin is made from special steel, selected for wear resistance and dimensional stability under typical shop conditions, which extends service life and reduces rework. Supplied as a single, standalone reference item (SKU M323.A41), this workshop execution component integrates seamlessly into existing quality workflows. Choosing Metav IndustryLine products also means benefiting from Metav’s quality filter in Emmerich, which supports reliable European distribution and consistent product verification. Secure workshop-ready gauge pins from Metav Werkzeuge for reliable end-measure checks — contact our advisors for application guidance on M323.A41 via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.A41 GTIN: 4061905065446 Manufacturer: Metav IndustryLine Facts Diameter: 10.41 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Single gauge pin, workshop execution Category: Gauge pins SKU: M323.A41 FAQ What is the manufacturing tolerance of this gauge pin? The gauge pin is produced to a tolerance of ±0.002 mm, making it suitable for repeatable reference checks and precision workshop measurements. Which material is used for the pin and what does it mean for durability? This M323.A41 pin is made from special steel, chosen for wear resistance and dimensional stability under regular workshop conditions. For which applications is this reference pin intended? Typical uses include end‑position verification, datum and fixture alignment, alignment of mating parts and quick pass/fail checks in production. Is the product supplied as a single item or as part of a set? The article is supplied as a single gauge pin (single item) under SKU M323.A41, intended for individual reference or to complement existing gauge assortments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.42mm Gauge Pin Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of precision to ±0.002 mm, robust workshop construction and compact handling for reliable end‑measure inspections; order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.A42 — single test pin, 10.42 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin M323.A42 is a single precision test pin designed for end‑measure checks and fit verification in workshop and inspection environments. Diameter 10.42 mm tolerance ±0.002 Workshop version, length 50 mm Made from special steel Supplied in a protective transport case Consistent accuracy for repeatable end‑measure checks The M323.A42 delivers a declared accuracy of ±0.002 mm, which translates into trustworthy repeatability for go/no‑go assessments and assembly checks. Such a tolerance is suitable where close fits and tight clearances are involved; the low variation reduces measurement scatter and provides a reliable reference for quality control and setting gauges. The compact mass and short shank keep thermal and handling effects minimal, supporting stable readings during routine shop inspection. Built for the workshop — robust material and easy handling Constructed from special steel, this test pin resists wear and keeps a stable profile across repeated use, making it appropriate for benchwork and production checks. The 50 mm length and 10.42 mm diameter balance accessibility and rigidity, while the workshop specification emphasises a design that tolerates everyday handling. At approximately 0.1 kg, it is simple to position and manoeuvre, and the supply in a protective transport case reduces risk during storage and transit, preserving the reference surface between uses. Practical uses and integration into inspection routines As a precision end‑measure component, the gauge pin is suited to bore verification, pin fit checks, fixture setting and dimensional reference tasks in metalworking and assembly. The slender geometry enables access into tight locations while the defined tolerance supports comparative measurements against micrometre or caliper checks. For documentation and traceability, note the article reference M323.A42 when specifying replacements or creating inspection records; further technical questions and application advice can be provided by the Metav team to ensure correct selection for specific measuring chains. For workshop-ready precision from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for tailored advice and fast dispatch to integrate the M323.A42 into inspection routines. Technical data Article number: M323.A42 GTIN: 4061905066177 SKU: M323.A42 Weight: 0.1 kg Numerical data Diameter: 10.42 mm Length: 50 mm Tolerance: ±0.002 mm Special features Workshop version Material: Special steel Supplied in protective transport case Category: Gauge pins FAQ What is the declared tolerance of this gauge pin? The M323.A42 gauge pin is specified with a tolerance of ±0.002 mm, suitable for tight fit and end‑measure checks. Which material is used for the pin? The pin is made from special steel, selected for wear resistance and dimensional stability in workshop use. Is the pin suitable for bore and fit checks in production? Yes — the geometry and accuracy of this test pin make it suitable for bore verification, fit testing and fixture set‑up in metalworking environments. How should the gauge pin be stored between uses? Store the pin in its protective transport case to avoid nicks or contamination on the measuring surface and to preserve accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.43mm Test Pin, Single, 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of high repeatability, compact dimensions and robust special‑steel construction for reliable end‑measurements in workshop and inspection tasks. Order the M323.A43 directly via Metav Werkzeuge or consult the team for application advice. M323.A43 Gauge Pin — 10.43 mm Ø, 50 mm Length (Metav IndustryLine) A M323.A43 gauge pin designed as a single precision reference for end‑measurements, fixture setting and dimensional checks in workshop and inspection environments. Precision tolerance ±0.002 mm Special steel construction 50 mm length for stable support Consistent measurement performance for production checks The compact cylindrical reference, manufactured from special steel, delivers high repeatability in a small footprint. With a nominal diameter of 10.43 mm and a stated tolerance of ±0.002 mm, the pin provides a reliable datum for quick go/no‑go checks and setup verification. The tight tolerance reduces measurement scatter during repetitive tasks, which supports process stability and lowers rework rates on machined components. Robust design that eases handling and fixturing At 50 mm overall length the component balances accessibility with rigidity, making it straightforward to position in jigs and fixtures without excessive bending. The workshop‑oriented execution offers a durable surface finish that resists light knocks and handling in daily use. As a single gauge element, it functions well as a reference for end‑face measurements and for establishing clear limits during manual inspection routines, improving throughput in small‑batch production. Traceable accuracy and practical integration into inspection workflows Marked by its industrial tolerance, this gauge pin integrates into inspection protocols where precise end measures are required. The tolerance figure ±0.002 mm is immediately usable for uncertainty budgets and process capability assessments. For layout or verification tasks it serves as a compact reference, allowing teams to standardise checks across workstations and to document conformity with internal quality procedures. Contact Metav Werkzeuge today for delivery from Emmerich and for tailored advice on integrating the M323.A43 gauge pin into existing inspection routines Technical data Article number: M323.A43 GTIN: 4061905066535 Material: Special steel Weight: 0.1 kg Accuracy: ±0.002 mm Diameter: 10.43 mm Length: 50 mm Core specifications Diameter: 10.43 mm Length: 50 mm Tolerance: ±0.002 mm Mass: 0.1 kg Features Workshop version Single gauge pin Suitable as reference for end measurements Robust finish for handling and fixturing FAQ What measurement tolerance can be expected from this gauge pin? The M323.A43 gauge pin is specified with a tolerance of ±0.002 mm, making it suitable for precise end‑measurements and reference checks. Is the M323.A43 suitable for fixture set‑up and jigs? Yes. The 50 mm length and workshop‑grade construction allow stable placement in fixtures and jig assemblies for consistent reference positioning. What material is used for the gauge pin and what does that imply? The pin is manufactured from special steel; this provides durability and a wear‑resistant surface suitable for regular handling in inspection and workshop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.44mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of precise end‑dimension checks and a wear‑resistant design to secure repeatable inspection results. With a 10.44 mm diameter and a 50 mm usable length combined with an industrial accuracy of ±0.002 mm, this workshop‑grade gauge pin supports reliable alignment and go/no‑go verifications—order directly via Metav Werkzeuge or consult the product advisers for application guidance. Gauge Pin M323.A44 – 10.44 mm diameter, 50 mm length (Workshop configuration) A Gauge Pin M323.A44 designed for precise end‑measurement, alignment and fixture verification in workshop and inspection environments Workshop configuration for robust daily use Diameter 10.44 mm for end‑dimension checks High accuracy ±0.002 mm Made from special steel for wear resistance Repeatable end‑dimension checks that reduce rework The primary role of a gauge pin in quality control is to deliver reproducible reference dimensions for assemblies and inspection fixtures. With a nominal 10.44 mm diameter and an indicated accuracy of ±0.002 mm, this pin supports tight tolerance verification without the need for complex setup. The small form factor concentrates stiffness where it matters, helping to preserve repeatability when used for plug checks, dowel alignments or end‑dimension comparisons. By providing a fixed, traceable datum, the component reduces inspection variance and contributes directly to process efficiency and lower scrap rates. Durable workshop design for continuous use Built as a workshop configuration, the pin is manufactured from special steel chosen for wear resistance under frequent insertion cycles. The 50 mm length provides sufficient engagement for many common jigs and fixtures while remaining compact enough for handheld or bench operations. The balanced geometry limits eccentric loading and minimises deformation during routine use, so the pin keeps its form in daily production environments. The construction supports longer service life and predictable maintenance intervals, which benefits shops aiming for steady uptime and lower total cost of ownership. Quick integration into fixtures and inspection routines The straightforward cylindrical form enables simple incorporation into existing test rigs, pin plates and alignment tools. Where rapid throughput is required, this gauge pin serves as a reliable stop, reference or alignment element that speeds up component seating and verification steps. Its nominal size and industrial accuracy make it suitable for assembly control, pass/fail checking and use as a master reference in dimensional checks. The efficient fitment properties translate into fewer handling steps and measurable time savings on repetitive inspection tasks. Engineered precision for traceable quality decisions For inspection processes that demand consistent, objective results, the combination of nominal diameter and tight tolerance offers a clear factual basis for go/no‑go decisions. The designation M323.A44 identifies this item within inventory and inspection documentation, facilitating traceability across the workflow. When documentation and repeatability are priorities, a compact, high‑accuracy pin provides a practical substitute for more elaborate gauging setups, enabling swift, documented measurements that feed directly into quality records. Contact Metav Werkzeuge to discuss how the M323.A44 workshop gauge pin fits into existing inspection chains or to request supply and delivery options from our Emmerich location Technical Data Article number: M323.A44 GTIN: 4061905066542 Brand: Metav IndustryLine Category: Gauge pins Facts Diameter: 10.44 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg eClass: 21170231 Special features Material: Special steel Version: Workshop execution Application: End‑dimension checks, alignment, fixture referencing FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.A44 is specified with an accuracy of ±0.002 mm, making it suitable for tight workshop and inspection tolerances. Can this pin be used for alignment in assembly jigs? Yes, the workshop configuration and the 10.44 mm nominal diameter make the pin appropriate for alignment tasks and fixture referencing in production environments. Which material is used and what does it mean for wear? Manufactured from special steel, the pin offers improved resistance to wear during frequent insertion cycles, extending service life under typical workshop conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.45mm Gauge Pin Length 50mm Workshop Version - Metav IndustryLine
Reliable, workshop‑grade gauging for consistent end‑measure checks: the combination of a 10.45 mm nominal diameter, 50 mm length and a ±0.002 mm tolerance makes this probe pin a practical choice for routine inspection tasks and fixture verification; order the gauging pin directly via Metav Werkzeuge or consult our specialists for matching and delivery options. Gauging pin M323.A45 — 10.45 mm Ø, 50 mm length (Metav IndustryLine) A gauging pin in workshop execution for precise end‑measure verification and routine fixture checks across production and inspection benches. Workshop version for routine use Diameter 10.45 mm for end‑measure checks High repeatability with ±0.002 mm tolerance Robust special steel construction Precision for end‑measure verification The 10.45 mm nominal diameter and a tight ±0.002 mm tolerance deliver reliable dimensional references for end‑measure tasks. This degree of accuracy supports reproducible inspection results and reduces measurement scatter when checking bores, pins and mating components. The specification translates directly into fewer false rejects and quicker go/no‑go decisions on the shop floor, promoting efficient quality control routines. Built for workshop conditions and serviceability Constructed from special steel and offered in a workshop version, the probe pin combines surface hardness with resistance to routine wear. The 50 mm length gives a stable support for end‑measure checking without unnecessary overhang, while the modest mass contributes to easy handling during repetitive operations. These attributes extend service life and reduce downtime for replacements, helping maintain steady throughput in general mechanical and metalworking environments. Streamlined integration into inspection workflows Designed as a practical reference element, this probe pin simplifies fixture alignment and dimensional spot checks within established metrology procedures. The compact form factor and clear dimensional specification enable rapid verification steps during set‑ups and in‑process checks, increasing throughput and cutting rework. Clear identification and traceability support stock management and make the component straightforward to specify for maintenance or inspection replenishment. For workshop‑grade repeatability and dependable reference checks, request technical matching or a supply proposal from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for direct assistance. Technical data Article number / SKU: M323.A45 GTIN: 4061905062346 Description: Gauging pin, single, 10.45 mm Ø, 50 mm length Material: Special steel Version: Workshop execution Facts Diameter: 10.45 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Suited for end‑measure verification Single unit delivery Workshop execution for routine use Category: Gauging pins (Messstifte) FAQ What tolerance does this gauging pin offer? The gauging pin M323.A45 (Metav IndustryLine) is specified with a tolerance of ±0.002 mm, suitable for precise end‑measure checks and repeatable inspection tasks. Is the pin suitable for general fixture alignment? Yes. The workshop execution and 50 mm length make this gauging pin well suited to fixture alignment and quick positional checks on assembly and inspection jigs. What material is used for the probe pin? The item is made from special steel, chosen to balance surface hardness and wear resistance for workshop conditions. Is a calibration certificate supplied with the product? The product data does not state a calibration certificate as standard; please contact Metav Werkzeuge for calibration options if a formal certificate is required. How should the gauging pin be stored and maintained? Store in a dry, clean environment and protect the tip from knocks; periodic visual inspection and gentle cleaning will preserve accuracy and service life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.46mm Test Pin, Single, 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of precise 10.46 mm diameter control, workshop-grade special steel, and a compact 50 mm length for reliable end‑measure inspections and fast in‑process checks. Order the inspection pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.A46 — 10.46 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin M323.A46 is a single inspection pin designed for precise end‑measure and plug checks in workshop and small‑batch quality control environments Precision 10.46 mm diameter Special steel for workshop use Compact 50 mm overall length Workshop‑grade design for routine inspection High‑precision control for end‑measure tasks The inspection pin offers a diameter of 10.46 mm with a verified dimensional variation of ±0.002 mm, a tolerance that supports very fine acceptance criteria in metrology tasks. This level of repeatability helps maintain consistent go/no‑go assessments during incoming inspection and during process checks, reducing the risk of downstream rework. The stated variation corresponds to micrometre‑scale control, making the pin suitable where small deviations matter for assembly fit and functional clearance. Robust, workshop‑ready construction for everyday use Manufactured from special steel, the probe is built as a workshop‑grade tool intended for frequent handling and rapid checking routines. The 50 mm overall length and compact mass make it easy to position in bores and on datum faces without excessive overhang, so measurements remain stable during short inspection cycles. The simple single‑piece design prioritises durability and ease of cleaning, promoting long service life under typical workshop conditions. Traceable identification and practical inspection benefits The item is supplied as an individual inspection pin (SKU M323.A46) and features clear identification for traceability within quality records and tooling lists. Its compact format streamlines routine end‑measure checks, increasing inspection throughput and helping to avoid assembly defects. Integration into bench top gauges or ad‑hoc inspection jigs is straightforward, enabling faster decision making in production and quality assurance workflows. For workshop‑ready precision choose Metav IndustryLine and contact Metav Werkzeuge in Emmerich for product availability and technical consultation via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M323.A46 GTIN: 4061905062353 Manufacturer: Metav IndustryLine Facts Diameter: 10.46 mm Length: 50 mm Weight: 0.1 kg Accuracy / variation: ±0.002 mm Special features Material: Special steel Single item delivery Workshop execution for routine use Application: End‑measure / plug checks FAQ Is this inspection pin suitable for precision bore checks? Yes. The M323.A46 inspection pin is intended for end‑measure and plug checks, offering a 10.46 mm diameter with a variation of ±0.002 mm suitable for fine bore verification. What material is the gauge pin made from? The pin is made from special steel and supplied in a workshop‑grade execution to withstand regular handling and inspection tasks. How compact is the pin and what handling advantages does this bring? With a 50 mm overall length and low mass, the pin is compact for easy positioning in bores and on datum faces, which supports stable measurements during rapid inspection cycles. What level of dimensional repeatability does the product offer? Dimensional variation is specified as ±0.002 mm, enabling micrometre‑level repeatability suitable for stringent quality checks. How is the item identified for traceability? The product is supplied as a single inspection pin with SKU M323.A46 and GTIN 4061905062353 for straightforward traceability in inspection records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.47mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of precision, compact form factor and robust workshop execution to streamline routine inspection tasks; the 10.47 mm diameter and ±0.002 mm tolerance make this a reliable go‑to for quick end‑measure checks. Order directly via Metav Werkzeuge or consult our specialists for technical clarifications. Gauge pin M323.A47 — 10.47 mm dia, 50 mm length (Metav IndustryLine) A gauge pin designed for end‑measurement and quick go/no‑go checks in workshop environments, offering a compact 50 mm length for confined spaces Workshop‑grade construction for daily use Diameter 10.47 mm for precision fits Length 50 mm suited to compact checks Dimensional accuracy ±0.002 mm Precision where it counts The compact design provides a consistent datum for checking bore sizes and end measurements. Manufactured from special steel, the pin delivers dimensional stability and wear resistance that preserve fit over many cycles. The tight ±0.002 mm tolerance means fewer false rejects during routine inspection, improving throughput and reducing rework. For operators who value repeatability, this tool converts a simple tactile check into a verifiable step in the quality chain. Engineered for workshop environments This workshop variant is built to withstand daily handling and quick services at the bench. The short 50 mm length and modest mass contribute to easy manual handling and rapid placement into bores or gauges, while the choice of special steel keeps surface finish and roundness stable under mechanical contact. The robust construction minimises the need for frequent replacements and supports a predictable inspection rhythm on the shop floor. Practical application and handling guidance Use the pin for end‑measure validation, bore checking and as a reference gauge during assembly or testing. Its 10.47 mm diameter offers a snug fit for components specified around that nominal size and can be used as a fast check in incoming inspection or set‑up routines. Clean and lightly oil the pin before storage to avoid corrosion; when in use, verify seating and visual alignment rather than relying solely on tactile feel to ensure correct engagement. Why this tool benefits production A compact gauge pin reduces cycle time for routine verification steps and integrates smoothly into established inspection sequences. By providing a reliable mechanical reference with industrial tolerance, it reduces downtime caused by uncertainty and supports better decision making on the line. The workshop specification ensures that the component balances durability with cost‑effective sourcing for high‑volume environments. Discuss application needs with Metav Werkzeuge to ensure fit for purpose and to arrange supply from stock at the Emmerich site Technical data Article number: M323.A47 GTIN: 4061905062360 Material: Special steel Length: 50 mm Diameter: 10.47 mm Accuracy: ±0.002 mm Weight: 0.1 kg Facts Category: Gauge pin Variant: Single pin, workshop execution Intended use: End measurement, bore checking Packaging: Single item Special features Robust workshop construction Tight tolerance for reliable checks Compact length for confined spaces Suitable for repeated routine use FAQ What is the nominal diameter and length of this gauge pin? The gauge pin is specified at 10.47 mm diameter with a 50 mm length; it is supplied as the single‑pin version M323.A47 from Metav IndustryLine. How accurate is the M323.A47 gauge pin? The pin is manufactured to a dimensional accuracy of ±0.002 mm, giving dependable results for rapid end‑measurement and fit checks. Which material is used and how should the pin be maintained? The pin is made from special steel; recommended care is cleaning after use and light oiling for storage to protect the surface and maintain roundness. Can this pin be used for production spot checks on assembly lines? Yes — the workshop‑grade construction and compact format make the gauge pin suitable for fast spot checks during set‑up and incoming inspection in production environments. Is this item supplied individually or as part of a set? This article is supplied as a single gauge pin under SKU M323.A47, sold individually for selective replacement or targeted inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.48mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Combine the compact 50 mm length with ±0.002 mm accuracy and robust special steel for reliable end‑measurements; order the gauge pin directly via Metav Werkzeuge or contact our consultants for tailored advice. Gauge pin, single, Ø 10.48 mm, length 50 mm — Metav IndustryLine The Gauge pin, single, Ø 10.48 mm, length 50 mm is a compact, workshop‑grade measuring pin designed for precise end‑measurements and fitting checks in industrial metrology. Workshop version for robust use Diameter 10.48 mm for precision checks Tolerance ±0.002 mm for high accuracy Supplied in a protective transport case Precision where it matters This gauge pin is manufactured for fine end‑measurement tasks and delivers a repeatable tolerance of ±0.002 mm, which reduces uncertainty in fit‑control and inspection routines. With a nominal diameter of 10.48 mm and a compact 50 mm length, the component sits in the micro range of measuring tools and is therefore suited to applications where small deviations affect assembly or functional clearance. The stated accuracy helps to ensure that measurements translate directly into reproducible production decisions rather than approximate estimates. Robust, workshop‑ready design Engineered as a workshop version, the pin is produced from special steel, offering strength and wear resistance under frequent handling. The robust material and compact geometry make the item durable during repetitive insertion and removal cycles in gauges or fixtures. Delivery in a transport case protects the gauge pin during storage and transit, maintaining dimensional integrity until the moment of use and simplifying logistics between bench and inspection station. Practical uses in quality control and assembly The measuring pin is intended for end‑measurements, fitting checks and verifying bore alignments in both small assemblies and precision components. Typical uses include gauge verifications, plug checks and quick go/no‑go confirmation within incoming inspection or final assembly workflows. The straightforward geometry makes interpretation of results simple: matching the pin to a mating bore confirms conformity or signals the need for rework with minimal secondary interpretation. Handling, maintenance and storage Lightweight and easy to handle at 0.1 kg, the pin can be used single‑handed in repetitive sequences without operator fatigue. Routine upkeep is limited to gentle cleaning and protective storage in the supplied case; avoiding abrasive contact preserves the specified tolerance. For long‑term accuracy, periodic inspection against master gauges is recommended to detect wear before it affects measurement outcomes. Metav IndustryLine backing and practical benefits As part of the Metav IndustryLine range, this tool benefits from the supplier’s long experience in making precision accessible to workshops and industry alike. The compact format, exact tolerance and workshop focus combine to deliver a dependable tool for everyday metrology tasks, reducing measurement uncertainty and supporting consistent production quality. Contact Metav Werkzeuge for availability and delivery information regarding the Metav IndustryLine gauge pin — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: M323.A48 GTIN: 4061905062889 Brand: Metav IndustryLine Facts Diameter: 10.48 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop version Special steel Supplied in transport case Designed for end measurements FAQ Is this pin calibrated on delivery? The supplied gauge pin is delivered as a measuring part; calibration status is indicated on the product label and will be documented if provided with the item. Can the pin be used for fitting checks in production fixtures? Yes, the Metav IndustryLine gauge pin is suitable for fitting checks and quick bore verifications in production fixtures and assembly stations. What maintenance is required to preserve accuracy? Regular cleaning, careful storage in the transport case and periodic comparison with master gauges will preserve the pin's ±0.002 mm accuracy. Is the material suitable for heavy‑use environments? The pin is made from special steel, chosen for wear resistance in workshop conditions; however, routine inspection is advised to detect wear from intensive use. Which measurement tasks is the pin best suited to? Designed for end‑measurements and fitting checks, the pin is ideal for small‑format precision tasks, inspection benches and quick conformity assessments for components with tight clearances. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.49mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
The combination of high repeatability, Ø 10.49 mm nominal diameter and a narrow tolerance of ±0.002 mm makes this inspection pin an efficient choice for consistent plug and end‑measurement checks in daily workshop routines; its special steel construction and workshop specification ensure durability and reliable seating in gauges. Order the precision gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single — Ø 10.49 mm, 50 mm length (Metav IndustryLine) Gauge pin, single — Ø 10.49 mm, 50 mm length is a compact inspection mandrel for precise end‑measurements, fit checks and reference tasks in workshop and quality environments Workshop version for daily use Diameter 10.49 mm for tight fits Length 50 mm for deep bores Precision tolerance ±0.002 mm Consistent checks through measured tolerances This inspection mandrel is engineered to deliver repeatable fit checks thanks to a nominal diameter of 10.49 mm combined with a narrow tolerance of ±0.002 mm. In practice, that means reliable verification of bore sizes and plug‑gauging tasks without frequent rework. The compact 50 mm length provides access to moderately deep features while keeping handling straightforward; the result is a measurable reduction in cycle variation during incoming inspection and setup checks. Robust material and workshop design for long service life Manufactured from special steel and specified as a workshop version, the pin resists wear under typical shopfloor handling and repeated engagement. Surface treatment and material choice reduce fretting and maintain the functional diameter over time, which preserves gauge accuracy between maintenance cycles. The single‑piece supply simplifies inventory management where dedicated reference pins are needed for go/no‑go tests or dimensional comparisons. Practical handling, storage and transport Supplied as an individual unit with protective transport packaging, the pin arrives ready for placement in inspection sets or dedicated fixture pockets; delivery includes a protective case to avoid damage during transit. The modest weight and compact form factor make it suitable for portable inspection kits or fixed gauge nests. Traceable identification via SKU and GTIN supports process documentation and keeps quality records coherent across small and medium production runs. For application advice, order options or to discuss specification matching contact Metav Werkzeuge in Emmerich; our consultants will advise on suitability, alternative diameters and batch supply. Technical data Article number: M323.A49 SKU: M323.A49 GTIN: 4061905062896 Label: Gauge pin, single, Ø 10.49 mm, length 50 mm Facts Diameter: 10.49 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop execution Delivered in transport case Single piece supply Category: Gauge pin / inspection pin FAQ What is this pin best used for? The gauge pin is intended for end‑measurement checks, plug‑gauging and fit verification; the Ø 10.49 mm nominal diameter and tight tolerance make it suitable for precision fit checks and reference tasks. Is the pin supplied individually or in sets? This article is supplied as a single gauge pin; the delivery includes a protective case appropriate for transport. What material and durability can be expected? Made from special steel and specified as a workshop version, the pin offers robust wear resistance suited to frequent use on the shopfloor. Can this pin verify tight tolerances in inspection routines? Yes; with a tolerance of ±0.002 mm and a nominal diameter of 10.49 mm, the gauge pin supports accurate pass/fail checks and dimensional control within typical workshop QC processes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.51mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Benefit from precise dimensional control and robust workshop design: a 10.51 mm nominal diameter, 50 mm length and a measured tolerance of ±0.002 mm ensure repeatable go/no-go checks and reliable in‑process verification. Supplied in a transport box as a workshop execution, this pin combines accuracy and durability for routine inspection tasks. Order the gauging pin directly via Metav Werkzeuge or ask our consultants if needed. Gauging pin M323.A51 — 10.51 mm diameter, 50 mm length (Metav IndustryLine) The gauging pin M323.A51 is a workshop‑grade test pin designed for fast dimensional checks and plug‑gauge applications in production and inspection environments. Workshop‑grade construction Diameter 10.51 mm nominal High tolerance ±0.002 mm Supplied in transport box Precision where it matters A nominal diameter of 10.51 mm combined with a declared tolerance of ±0.002 mm makes this test pin suitable for tasks that require small clearance verification and tight fit assessments. The stated accuracy describes the maximum deviation expected during manufacture; in practical terms this means the part can be relied upon for consistent pass/fail checks where micrometric differences determine assembly acceptance. The compact length and controlled geometry reduce bending and ensure that the contact zone presents a stable reference, promoting repeatable results during routine inspection sequences. Durable, workshop‑ready construction Manufactured from special steel and specified as a workshop version, the pin withstands the demands of regular use on the shop floor. The 50 mm length provides a convenient handling length while keeping the centre of mass close to the contact face, which helps to avoid lever‑induced errors. At approximately 0.1 kg, the component is robust without being cumbersome, and the finish supports easy cleaning and long service life under normal workshop conditions. Supplied in a transport box, the item is protected in transit and stored safely between uses. Practical integration into inspection workflows This single test pin is intended for straightforward integration into existing gauging routines: use it for alignment checks, bore verification and plug‑gauge comparisons where a defined nominal shaft is required. Its compact format simplifies handling during assembly checks and fixture trials, while the clear nominal dimension and tolerance facilitate traceability in inspection records. For specialised setups or batch traceability, refer to the article number and GTIN when documenting the tool in quality systems to maintain consistent identification across procurement and inspection documentation. Choose the Metav IndustryLine M323.A51 gauging pin from Metav Werkzeuge for dependable dimensional control and consult our specialists in Emmerich for tailored delivery and technical advice Technical Data Article number: M323.A51 GTIN: 4061905063466 Material: Special steel Type: Single gauging pin Data Nominal diameter: 10.51 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Special features Workshop version Supplied in transport box Single‑piece test pin FAQ What tolerance can be expected from this gauging pin? The gauging pin M323.A51 is manufactured to a tolerance of ±0.002 mm, making it suitable for tight clearance and fit checks in production inspection. What material is the pin made from and how does that affect use? The pin is made from special steel, providing wear resistance and dimensional stability for routine workshop inspections and handling. Is the item delivered ready for workshop use? Yes, the pin is supplied as a workshop execution and delivered in a transport box, ready for immediate use or secure storage. How is the M323.A51 typically applied in inspection processes? It is used for plug‑type checks, bore verification and basic alignment tasks where a defined nominal shaft diameter is required for go/no‑go decisions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.53mm Gauge Pin 50mm Length, Workshop Version, Special Steel - Metav IndustryLine
A compact workshop gauge pin that combines tight dimensional control with robust construction: 10.53 mm diameter and 50 mm length with a stated runout accuracy of ±0.002 mm support repeatable end‑measure checks and go/no‑go verifications. Supplied in a protective transport case and made from special steel, it is ideal for routine fit inspections and assembly controls. Order the gauge pin directly via Metav Werkzeuge or consult our advisors for specification matching. Gauge pin, single 10.53 mm (50 mm length) — Metav IndustryLine workshop version A gauge pin, single 10.53 mm (50 mm length) designed for precise end‑measure and fit verification in workshop metrology applications. Workshop version for robust use Diameter precisely 10.53 mm Tolerance ±0.002 mm for accurate checks Supplied in protective transport case Repeatable fit checks with industry‑grade tolerance The workshop‑grade pin delivers consistent measurement performance thanks to a machining tolerance of ±0.002 mm, which reduces scatter between repeated checks. With a nominal diameter of 10.53 mm and a shaft length of 50 mm, the component is suitable for short‑run verification tasks and fixture adjustments where tight concentricity and repeatability matter. The combination of controlled diameter and minimal runout means fewer false rejects and less rework during assembly and inspection cycles. Built to withstand workshop handling Produced in a workshop version and fabricated from special steel, the pin resists everyday handling and maintains dimensional stability under regular use. Its compact mass (approx. 0.1 kg) makes it easy to position in gauges and fixtures without adding excess inertia. Delivery in a protective transport case preserves the ground surfaces during storage and transit, ensuring the pin arrives ready for immediate use in production or quality control environments. Fast integration into inspection routines As a precision checking tool, the pin slots directly into existing go/no‑go gauges, collar checks and bench fixtures, accelerating routine inspections. Using a dedicated gauge pin for end‑measure reference simplifies set‑up and shortens cycle times during first‑article inspection or batch acceptance tests. Traceable identification via GTIN and SKU supports stock management and reduces administrative overhead when standardising inspection kits across several workstations. Practical information for procurement and logistics The single gauge pin format is well suited for modular inspection kits and spares inventory. Its compact size and protective case make handling and storage straightforward, while the clear technical identifiers simplify ordering and internal part control. For purchasing teams seeking a robust, repeatable verification tool, the pin offers a balance of precision and practicality for workshop metrology. For procurement or technical matching of Metav IndustryLine gauge pins, contact Metav Werkzeuge in Emmerich by phone or e‑mail to discuss delivery and integration into existing inspection kits: +49 2822 7131930 / info@metav-werkzeuge.com Technical data Article number: M323.A53 GTIN: 4061905063480 Material: Spezial-Stahl Category: Messstifte Manufacturer: Metav IndustryLine Facts Diameter: 10.53 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop version Single gauge pin Delivered in protective transport case for transport End‑measure reference (endmasse) FAQ What inspection tasks is this gauge pin suitable for? The M323.A53 gauge pin is suitable for end‑measure checks, fit and assembly verification, and use in go/no‑go fixtures where a precise 10.53 mm reference diameter is required. Is the pin supplied ready for use or does it need additional preparation? The M323.A53 is supplied in a protective transport case and ready for immediate use in workshop inspection routines without further preparation. How does the stated tolerance affect measurement reliability? A tolerance of ±0.002 mm ensures high repeatability for routine checks; this narrow tolerance reduces variability and supports consistent pass/fail decisions during production inspections. Can this pin be used in fixture calibration or as a wear reference? Yes, the precision pin can serve as a stable end‑measure reference in fixtures and as a benchmark for checking wear on mating components during preventive maintenance. Which product identifiers help with stock management? Use the SKU M323.A53 and GTIN 4061905063480 to manage inventory, order replacements and document the part within inspection kits. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.54mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of high repeatability, compact dimensions and robust workshop design for reliable end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or consult the Metav team for application advice. Gauge pin M323.A54 — 10.54 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin M323.A54 is a single precision measuring dowel designed for end‑dimension verification and fit checks in workshop and inspection environments. High‑precision tolerance ±0.002 mm Diameter 10.54 mm for exact fit 50 mm hardened length for stability Workshop-grade special steel construction Precision that secures process accuracy The compact measuring dowel delivers a tolerance of ±0.002 mm, providing a measurable advantage where small deviations have direct impact on assembly quality. With a nominal diameter of 10.54 mm, the part establishes a defined reference for plug‑type checks and gauge setting; this reduces the need for repetitive adjustment and lowers the probability of rework. The stated accuracy is suitable for quality control tasks where traceable, repeatable results are required and where clear numerical limits support decision making in production. Robust construction for repeatable handling Constructed from special steel and presented in a workshop configuration, the pin combines dimensional stability with resistance to handling wear. The 50 mm length offers a balance between engagement depth and rigidity so that measurements remain reproducible during insertion and extraction cycles. The solid construction minimises elastic deformation under normal usage, enabling long service life and consistent performance for routine inspection or assembly applications in trade and light industry. Practical use and benefits in the workshop As a single, compact reference element, the measuring dowel is ideal for end‑dimension checks, go/no‑go trials and quick reference fits on jigs and fixtures. Its low weight (approx. 0.1 kg) and handy format support efficient handling on the shop floor; the simple geometry also eases cleaning and visual inspection. The combination of precise diameter and controlled length makes this tool well suited to integration into inspection benches where fast, reliable checks are needed to maintain flow and ensure conformity with drawing tolerances. For workshop‑grade precision from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for tailored advice and procurement at info@metav-werkzeuge.com or +49 2822 7131930 to secure the M323.A54 gauge pin for immediate integration into measurement routines. Technical data Article number: M323.A54 GTIN: 4061905063497 Brand: Metav IndustryLine Material: Special steel Accuracy: ±0.002 mm Facts Diameter: 10.54 mm Length: 50 mm Weight: 0.1 kg Single item configuration Special features Workshop execution Single gauge pin for end‑dimension checks Compact, rigid geometry for repeatable use FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.A54 from Metav IndustryLine is specified with a tolerance of ±0.002 mm, making it suitable for high‑precision end‑dimension checks. Is the measuring pin suitable for routine shop use? Yes, the workshop‑grade construction and special steel material of the M323.A54 are intended for regular handling and repeatable checks in workshop environments. What are the primary applications for this dowel? Typical uses include end‑dimension verification, plug‑type fit checks and quick reference fitting on fixtures; the 10.54 mm diameter and 50 mm length support these tasks reliably. How compact is the tool for handling and storage? With a length of 50 mm and a weight around 0.1 kg, the measuring dowel is compact and easy to position, handle and store alongside other inspection tools. Does the product come as a single item or part of a set? This entry refers to a single gauge pin (SKU M323.A54) supplied individually for flexible deployment in inspection and assembly workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.55mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of high repeatability and compact 50 mm form factor for reliable end‑measurement checks; the precision tolerance ±0.002 mm ensures reproducible results in workshop inspection routines. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for specification matching. Gauge pin, single – 10.55 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin, single is a precision checking pin for end‑measurements and reference checks in workshop and production inspection. Workshop version, robust construction Diameter 10.55 mm, tight tolerance Length 50 mm for compact checks Made from special steel, hard‑wearing High precision for repeatable inspection results The gauge pin is manufactured for tasks that demand consistent repeatability. With a nominal diameter of 10.55 mm and a manufacturing tolerance of ±0.002 mm, the pin provides a defined datum for end‑measurement procedures and small‑bore checking. Such a tolerance level reduces measurement uncertainty in routine controls and supports traceable comparison between batches — a clear advantage when reproducible fits or clearances are required in machining and assembly processes. Robust workshop design that endures daily use Constructed from special steel, the checking pin is finished for long service life under regular workshop conditions. The compact 50 mm length and modest mass make the pin simple to handle while remaining stiff enough for short‑range verification tasks. The workshop version balances durability with practicality: a tool that tolerates frequent use without compromising the dimensional reference required for quick go/no‑go assessments or comparative checks. Practical application in inspection workflows This single gauge pin is intended primarily for end‑measurement and small‑bore verification; it acts as a stable reference when aligning or checking mating parts and assemblies. Its compact format fits easily into inspection kits and bench setups, enabling operators to perform fast dimensional checks during setup, first‑off inspection or in‑process control. The straightforward geometry minimises handling complexity and supports quick throughput in repetitive inspection cycles. Engineered for reliability within a trusted supply chain Manufacturing consistency and clearly stated technical data help integrate the pin into quality procedures and documentation. The combination of special steel construction and a fine tolerance of ±0.002 mm delivers the technical basis for dependable pass/fail decisions and reduces rework. Purchasing via a reliable partner like Metav IndustryLine adds supply continuity and the practical benefits of an experienced metrology distributor for European workshops. Contact Metav Werkzeuge today to secure this Metav IndustryLine gauge pin (SKU M323.A55) for dependable end‑measurement checks and specification support Technical Data Article number: M323.A55 GTIN: 4061905063503 Category: Gauge pins Facts Diameter: 10.55 mm Length: 50 mm Mass: 0.1 kg Tolerance: ±0.002 mm Special features Material: Special steel Workshop version Single piece delivery Intended for end measurements FAQ What dimensional tolerance does the gauge pin offer? The gauge pin, single from Metav IndustryLine (SKU M323.A55) is produced to a tolerance of ±0.002 mm, providing a defined reference for repeatable checks. For which inspection tasks is this pin suitable? The pin is intended for end‑measurement and small‑bore reference checks; it is suitable for routine bench verification and comparative fitting tasks in workshop environments. What are the physical dimensions and weight of the pin? The Metav IndustryLine gauge pin has a diameter of 10.55 mm, a length of 50 mm, and a mass of approximately 0.1 kg. What material is used and how does that affect durability? Made from special steel, the checking pin resists wear in regular workshop use and maintains dimensional stability for frequent inspection cycles. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.56mm Gauge Pin, Workshop Version, 50mm Length, Special Steel in Case - Metav IndustryLine
Take advantage of the combination of workshop‑grade robustness, tight ±0.002 mm tolerance and compact dimensions for reliable end‑dimension checks; supplied ready for safe transport in a protective case. Order the gauge pin directly via Metav Werkzeuge or ask our consultants should additional specifications be required. Metav IndustryLine Gauge Pin — 10.56 mm diameter, 50 mm length Metav IndustryLine Gauge Pin for precise end‑dimension verification and setting tasks in production and inspection environments Workshop execution for everyday industrial use Diameter 10.56 mm with ±0.002 mm tolerance 50 mm hardened special‑steel length Supplied in transport case for safe storage Repeatable results for end‑dimension checks A compact, purpose‑built gauge pin designed to make routine dimension checks straightforward and dependable. The 10.56 mm diameter combined with a measured tolerance of ±0.002 mm provides a clear, verifiable basis for go/no‑go or reference checks on shafts, bores and assembly fixtures. Thanks to the short, precise geometry, measurement uncertainty from alignment errors is reduced; this supports consistent pass/fail decisions and reduces rework in machining and assembly processes. The industrial specification suits both bench inspection and in‑process verification. Robust workshop design that endures daily use Constructed from special steel and finished for workshop resilience, the test pin resists wear while maintaining its measuring surface form. The 50 mm length offers sufficient engagement depth for many common checks without becoming unwieldy, preserving stiffness where it matters. The workshop execution implies practical surface protection and handling features that speed routine use and prolong service life, so measuring setups remain stable and reproducible over repeated cycles. Practical integration into inspection routines Designed as a single, easily identifiable reference artefact, the pin supports quick fixture setup, gauge blocks pairing and end‑dimension verification during first‑off and batch inspections. Supplied in a protective transport case, the component arrives ready for controlled storage and transfer between workstations, reducing contamination and accidental damage. Marking and traceable SKU/GTIN allow straightforward inventory control and procurement for quality departments and toolrooms. Contact Metav Werkzeuge today to discuss the Metav IndustryLine gauge pin for your workshop needs — Metav Werkzeuge in Emmerich provides product expertise and fast, reliable supply; email info@metav-werkzeuge.com or call +49 2822 7131930 to request further technical details or tailored advice Technical data SKU: M323.A56 GTIN: 4061905063510 Label: Prüfstift, einzeln, 10,56 mm Länge 50 mm Manufacturer: Metav IndustryLine Weight: 0.10 kg Measurements / Core data Diameter: 10.56 mm Length: 50 mm Nominal tolerance: ±0.002 mm Mass: 0.1 kg Special features Workshop execution for industrial handling Material: special steel Intended use: end‑dimension and reference checks Delivered in protective transport case FAQ What tolerances can be expected from this gauge pin? The gauge pin from Metav IndustryLine is specified with a tolerance of ±0.002 mm, making the M323.A56 suitable for fine verification and tight control limits in workshop inspections. Is the pin suitable for routine fixture setting and assembly checks? Yes — the 50 mm length and robust special steel construction make this test pin appropriate for fixture positioning, reference seating and assembly verification in production environments. How is the component supplied to ensure preservation of accuracy? The Metav IndustryLine gauge pin is supplied in a protective transport case to prevent handling damage and contamination during storage and transfer between metrology stations. Can the pin be used as a go/no‑go reference or only for measurement? The item functions well as a precise reference for quick go/no‑go checks and as a calibrated reference for dimensional measurement tasks, given its tight tolerance and stable geometry. What identifiers help with ordering and traceability? Ordering and traceability are supported by the SKU M323.A56 and GTIN 4061905063510, which are noted on delivery documentation and internal inventory systems. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.57mm Gauge Pin 50mm Length Workshop Version, Special Steel in Case - Metav IndustryLine
Take advantage of a workshop-grade measuring probe that combines high repeatability and robust construction: the pin’s ±0.002 mm accuracy and Ø 10.57 mm working diameter make it suitable for precise end‑dimension checks and fixture set‑up. Order the test pin directly via Metav Werkzeuge or ask our consultants for application advice. Test pin M323.A57 — single measuring probe, Ø 10.57 mm, 50 mm length (Metav IndustryLine) The Test pin M323.A57 is a workshop‑grade measuring probe designed for accurate end‑dimension verification and quick fixture checks in metalworking and inspection stations Workshop version for robust use Ø 10.57 mm precision diameter 50 mm length for fixture checks Accuracy ±0.002 mm Precision tailored to end‑dimension control The single measuring probe delivers a clear metrological advantage where repeatable end‑measurements matter. With a nominal diameter of 10.57 mm and a verified displacement accuracy of ±0.002 mm, the probe is intended for tasks that require tight dimensional control. The high geometric stability of the special steel shaft reduces elastic distortion during contact, which supports consistent results across repeated measurements. This makes the component particularly useful in routines where small deviations affect downstream assembly or quality acceptance. Durable workshop design for everyday inspection Built as a workshop version, the probe combines a compact form with resistance to frequent handling and alignment operations. At 50 mm overall length and weighing approximately 0.1 kg, the probe balances reach and manoeuvrability for fixture checks, gauge validation and spot verifications on assemblies. The choice of special steel improves surface hardness and wear resistance compared with standard steels, extending service life under shop‑floor conditions while maintaining dimensional stability. Easy integration into measurement workflows Classified in the micro‑range (10–100 mm), this probe fits inspection benches and handheld gauge setups where small but critical dimensions are verified. Its straightforward geometry supports rapid positioning and repeatable contact points, helping to reduce set‑up time and the risk of human‑induced variation. By focusing on a single, well‑specified diameter and a short functional length, the design minimises bending and alignment errors, contributing to more reliable sampling during incoming inspection or process control checks. For reliable workshop inspection components, request the Test pin M323.A57 via Metav Werkzeuge — Metav’s specialists in precision tools will advise on suitability for specific inspection tasks and ensure prompt supply from Emmerich (info@metav-werkzeuge.com / +49 2822 7131930) Technical data SKU: M323.A57 GTIN: 4061905064289 Description: Test pin, single, Ø 10.57 mm, length 50 mm Brand: Metav IndustryLine Facts Diameter: 10.57 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm eClass: 21170231 Special features Workshop version Material: Special steel Category: Test pins Story trigger: end‑dimension checks FAQ What is the nominal diameter of the probe? The probe has a nominal diameter of 10.57 mm as specified for the Test pin M323.A57. What accuracy can be expected from this measuring pin? The measuring probe offers an accuracy of ±0.002 mm, suitable for tight end‑dimension checks. For which tasks is this test pin intended? The pin is intended for end‑dimension verification, fixture checks and spot inspections on components where a controlled contact diameter is required. What material is the pin made from? The shaft is made from special steel, providing enhanced wear resistance appropriate for workshop use. Is the pin classified for a specific measurement range? Yes — with a diameter and length in the small‑scale range, the probe is classified within the micro‑range (10–100 mm) for precise, compact measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.58mm Test Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
The combination of ±0.002 mm tolerance, a precise Ø10.58 mm diameter and a robust 50 mm length ensures reliable fit checks and repeatable end‑measure verification; benefit from workshop‑ready durability and secure transport packaging. Order the test pin directly via Metav Werkzeuge or ask our consultants if needed. Test pin, single, Ø10.58 mm, length 50 mm — Metav IndustryLine, workshop grade, high accuracy The Test pin, single, Ø10.58 mm, length 50 mm is a workshop‑grade gauge pin designed for accurate end‑measure checks and go/no‑go fits in production and inspection workflows. High dimensional accuracy ±0.002 mm Diameter Ø10.58 mm for precise fits Robust workshop version with hard finish Delivered in transport case for safety Reduce measurement uncertainty with decisive accuracy A small improvement in gauge precision directly reduces rework and scrap. The pin’s ±0.002 mm tolerance provides a quantifiable benefit when validating bore diameters, locating holes or checking assembly clearances, making it suitable for high‑precision workshop tasks. The stated tolerance translates into tighter process control, allowing quality teams to rely on measurements rather than estimations and to document conformity in inspection reports. Built for everyday use in workshop environments Constructed from special steel and specified as a workshop execution, the pin balances hardness and resistance to surface damage with manageable handling. The 50 mm length offers a stable support area for probing and seating while the Ø10.58 mm diameter matches common fit classes used in fixtures and gauges. Supplied in a transport case for safe storage and transit, the design reduces the risk of nicks and preserves gauge integrity between uses. Practical integration into inspection and assembly routines This gauge pin suits applications such as end‑measure verification, fixture set‑up and reference checks where quick, reproducible contact is needed. As a straightforward physical standard, it complements digital calipers and micrometres by supplying a simple plug‑gauge reference that is easy to document. Identified under SKU M323.A58, the component is compact, low mass and readily managed in pick‑and‑place operations or manual inspection benches, supporting efficient throughput without complex setup. For workshop supply and technical advice on Metav IndustryLine gauge pins contact Metav Werkzeuge in Emmerich for immediate dispatch and specification support — phone +49 2822 7131930, eMail info@metav-werkzeuge.com Technical data SKU: M323.A58 GTIN: 4061905064296 Material: special steel Version: workshop execution Category: Gauge pin Facts Diameter (mm): 10.58 Length (mm): 50 Tolerance (mm): ±0.002 Weight (kg): 0.1 Special features Delivered in transport case (plastic or wooden) for transport Robust finish for frequent handling Intended for end‑measure verification and fit checks FAQ What is the declared tolerance and why does it matter? The declared tolerance of ±0.002 mm ensures reproducible fit checks; the M323.A58 gauge pin from Metav IndustryLine provides the dimensional certainty required for tight assembly and inspection limits. Which material is used and how does it affect use? The pin is made from special steel, chosen for a balance of hardness and wear resistance so that the gauge maintains dimensional stability under normal workshop handling. Is the test pin supplied ready for transport? Yes — the test pin is supplied in a transport case (plastic or wooden) to protect the surface and preserve accuracy during handling and shipment. Can this pin be used for fixture and jig set‑up? The Ø10.58 mm diameter and 50 mm length make the M323.A58 suitable as a reference for fixture and jig set‑up, providing a quick physical standard for locating and checking mating parts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com