Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
10.5mm Gauge Pin Length 50mm Workshop Version, Special Steel in Case - Metav IndustryLine
Benefit from workshop‑grade robustness, special steel construction and high dimensional accuracy of ±0.002 mm for dependable end‑measure verification; order this gauge pin directly via Metav Werkzeuge or consult our advisors for specification matching. Gauge Pin M323.A50 — Single test pin, Ø10.5 mm, 50 mm length (Metav IndustryLine) A Gauge Pin M323.A50 engineered for precise end‑measure checks and routine verification tasks in workshop environments Workshop version with robust finish Diameter 10.5 mm, precision ±0.002 mm 50 mm hardened special steel length Single test pin for end‑measure checks Repeatable dimensional control for inline inspection The M323.A50 delivers consistent precision required for repeatable go/no‑go checks and end‑measure verification. With a manufacturing tolerance of ±0.002 mm, this measuring pin minimises uncertainty in serial inspection and provides a reliable reference for comparator gauges and fixture tests. The nominal Ø10.5 mm size suits many standard bore and plug checks, reducing the need for frequent gauge swaps and accelerating inspection throughput without compromising measurement integrity. Robust workshop construction for everyday use Constructed from special steel and configured as a workshop‑grade item, the pin withstands daily handling and routine insertion tasks. The 50 mm overall length gives sufficient reach for most component checks while maintaining low mass (approx. 0.1 kg) for safe, controlled manipulation. The compact design supports modular inspection setups and is easy to replace in gauge assemblies, helping to keep maintenance intervals short and workshop operations efficient. Practical integration into quality procedures This single measuring pin is suitable as a reference element within modular gaging chains, aiding fast acceptance testing and dimensional verification. Traceability is straightforward: order by SKU M323.A50 or GTIN for inventory control and documentation. The combination of small form factor and high accuracy supports both quick spot checks and structured inspection plans, enabling better process control and fewer downstream rejects while fitting seamlessly into standard workshop workflows. Contact Metav Werkzeuge for tailored advice on the M323.A50 gauge pin and workshop solutions; call +49 2822 7131930 or email info@metav-werkzeuge.com for prompt supply from Emmerich Technical data Article number: M323.A50 GTIN: 4061905063459 Label: Prüfstift, einzeln, 10,5 mm Länge 50 mm Manufacturer: Metav IndustryLine Core specifications Diameter: 10.5 mm Length: 50 mm Tolerance/accuracy: ±0.002 mm Weight: 0.1 kg Materials & features Material: Special steel Version: Workshop‑grade Category: Gauge pin / Measuring pin Packaging: Single item FAQ What is the nominal diameter of this gauge pin? The M323.A50 (Metav IndustryLine gauge pin) has a nominal diameter of 10.5 mm and an overall length of 50 mm. What dimensional tolerance does it offer? The manufacturing tolerance is ±0.002 mm, providing high repeatability for inspection tasks. Which environments is the workshop version designed for? The workshop‑grade construction is intended for routine end‑measure checks, fixture verification and general machining inspection tasks. Is a calibration certificate supplied with the pin? Calibration is not specified for this SKU; customers requiring a traceable certificate should request calibration services when ordering. How is this pin typically used in inspection chains? It is commonly used as a reference element for plug checks, end‑measure verification and as part of modular gauge sets to support rapid dimensional control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.61mm Gauge Pin, Workshop Version, 50mm Length - Metav IndustryLine
Take advantage of a precision‑ground 10.61 mm diameter combined with a 50 mm hardened length for reproducible end measurements in workshop routines. Order the gauge pin directly via Metav Werkzeuge or consult our advisors for specification matching and stock information. Gauge pin, single, 10.61 mm — 50 mm length (Metav IndustryLine) A gauge pin, single, 10.61 mm, designed as a robust workshop reference for end‑measurement and fitting checks Precision ground 10.61 mm diameter 50 mm hardened length for stability Special steel for wear resistance Workshop version for robust use Reproducible measurement accuracy for everyday workshop control The component serves as a tactile reference that converts a simple check into a reliable inspection criterion. With a nominal diameter of 10.61 mm and a manufacturing tolerance of ±0.002 mm, the part provides tight repeatability suitable for fine alignment and go/no‑go verification. The compact 50 mm shaft length gives a stable seating against contact faces while keeping handling straightforward during series checks, reducing the need for repeated adjustments and limiting production downtime. Durable construction that withstands routine handling Manufactured from special steel, the pin is prepared for frequent contact and sliding in typical shop environments; hardness and surface finish are matched to resist wear and to preserve the reference diameter over prolonged use. The workshop version designation reflects reinforcements to withstand knocks and repeated insertion, so the reference dimension remains dependable across many cycles. This combination of material and finish delivers a low‑maintenance solution that contributes to fewer scrapped parts and steadier product quality. Practical traceability and simple integration into control routines Supplied as a single inspection pin and identifiable by SKU M323.A61, the part slots easily into a toolbox or inspection kit and can be recorded in inventory and quality documentation for traceable checks. The lightweight design (approximately 0.1 kg) keeps manipulation effortless while the measurable geometry supports quick visual and tactile assessments. If further clarification on tolerances or suitability for a specific assembly is required, the Metav technical team can advise on matching the pin to gauges, fixtures or measuring sequences to streamline the inspection process. For workshop reliability, request the Metav IndustryLine gauge pin via Metav Werkzeuge in Emmerich or contact our advisors at info@metav-werkzeuge.com / +49 2822 7131930 to confirm availability and compatibility Technical Data Article number: M323.A61 GTIN: 4061905064722 Material: Special steel Length: 50 mm Diameter: 10.61 mm Accuracy: ±0.002 mm Weight: 0.1 kg Version: Workshop execution Facts Nominal diameter: 10.61 mm Shaft length: 50 mm Tolerance: ±0.002 mm Mass: 0.1 kg GTIN: 4061905064722 Special features Precision ground surface Single delivery (individual pin) Robust workshop design SKU: M323.A61 FAQ What level of accuracy can be expected from this gauge pin? The gauge pin provides a manufacturing tolerance of ±0.002 mm, making the M323.A61 suitable for precise workshop checks and alignment tasks where tight repeatability is required. Is the material suitable for frequent use in a production environment? Yes, the pin is made from special steel and finished to withstand repeated insertion and contact typical of workshop use, ensuring long‑term dimensional stability. Can this pin be used as a reference for go/no‑go checks? The 10.61 mm nominal diameter and the stated tolerance allow the pin to function effectively as a reference for go/no‑go assessments and simple assembly verifications. How is the product identified for inventory and traceability? The item is supplied individually and identifiable by SKU M323.A61 and GTIN 4061905064722 for documentation in quality records and inventory systems. What is the recommended application for this gauge pin? The part is intended as an end‑measurement reference and fitting check in workshops, assembly jigs and inspection benches where a robust, precise reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.62mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
The combination of high repeatability (±0.002 mm), special steel construction and compact 50 mm length ensures fast, reliable end‑measurements in workshop inspection routines. Order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single, Ø 10.62 mm, length 50 mm (M323.A62) — Metav IndustryLine The Gauge pin, single, Ø 10.62 mm, length 50 mm is a workshop‑grade reference pin designed for precise end‑measurement, assembly alignment and pass/fail checks in production and inspection tasks. Workshop version, robust construction Diameter Ø 10.62 mm, tolerance ±0.002 Length 50 mm for end‑measurements Made from special steel for longevity Precision that keeps production moving The Gauge pin, single, Ø 10.62 mm, length 50 mm delivers a high level of measurement certainty thanks to its specified tolerance of ±0.002 mm. In practical terms, this tight tolerance reduces the need for repeated adjustments and lowers scrap rates during assembly checks and feature validation. The compact 50 mm shaft provides a stable seating for end‑measurements and ensures repeatable contact geometry, which speeds up routine inspection cycles and supports consistent quality control in small‑batch and series production. Durable material and stable geometry for repeatable fits Constructed from special steel, the pin resists wear from frequent insertion and extraction in gauge blocks, fixtures and assembly jigs. The combination of a precisely turned Ø 10.62 mm diameter and a finished surface reduces play in locating features and maintains fit over time, delivering a longer service life compared with untreated reference pins. The result is fewer replacement events and less downtime for recalibration or tool changeovers, supporting smoother shop‑floor operation and predictable inspection throughput. Easy adaptation to workshop workflows and traceability Designed as a single reference element for end‑measurement tasks, this gauge pin integrates with standard fixture plates, comparator stands and manual gauging procedures. The clear product identifiers (SKU M323.A62, GTIN available) assist with inventory control and traceability in inspection documentation. As a workshop execution item, the pin is suitable for frequent use in production environments where robustness and simple handling are priorities, enabling straightforward storage alongside other measuring aids and reducing handling complexity. For workshop‑ready precision from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for order placement or technical advice: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data SKU: M323.A62 GTIN: 4061905064739 Description: Gauge pin, single, Ø 10.62 mm, length 50 mm Facts Diameter: Ø 10.62 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Execution: workshop version Application: end‑measurements, alignment and inspection FAQ What tolerance does the gauge pin have? The gauge pin is manufactured to a tolerance of ±0.002 mm, ensuring high repeatability for end‑measurement and reference tasks. Which material is used for this reference pin? The pin is made from special steel, selected for wear resistance and stable dimensional performance under frequent use. For which tasks is this pin intended? Intended primarily for end‑measurements, assembly alignment and pass/fail checks in workshop and production inspection settings. How is the product identified for inventory and traceability? Identification is possible via the SKU M323.A62 and GTIN 4061905064739, which support traceability in inspection records. Is this pin suitable for fixture and jig mounting? Yes — the turned geometry and precise Ø 10.62 mm diameter make it well suited for locating features in fixtures, jigs and comparator setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.63mm Gauge Pin Length 50mm Workshop Finish - Metav IndustryLine
Precision gauge pin in special steel (Ø 10.63 mm, 50 mm long) combines reliable dimensional control with workshop‑grade robustness; featuring a machining tolerance of ±0.002 mm, it supports consistent end‑measure verification. Order directly via Metav Werkzeuge or consult our advisors for application guidance. Pin gauge M323.A63 – single gauge pin Ø 10.63 mm, length 50 mm (Metav IndustryLine) A pin gauge M323.A63 designed for fast end‑measurement and diameter verification in workshop inspection and fixture setup Diameter Ø 10.63 mm for end‑measure checks Tolerance ±0.002 mm for reproducible results 50 mm length for handling and insertion depth Workshop version for robust, regular use Ensure process reliability with measurable precision This gauge pin delivers reproducible dimensional control where tight end‑measure checks matter. With a declared accuracy of ±0.002 mm, the pin is intended for verification tasks that demand small tolerance windows; the quoted figure reflects the manufacturing variability and enables reliable pass/fail decisions during assembly or incoming‑goods inspection. The use of special steel provides a stable reference surface for repeated use, helping to preserve nominal diameter and reduce measurement scatter compared with soft or untreated pins. Practical benefit: quicker checks, fewer stoppages Fitted at 50 mm overall length and a nominal Ø 10.63 mm, this single‑piece gage pin is sized to balance handling with adequate insertion depth for typical bores and fixtures. The compact length eases manual positioning and improves repeatability when used with go/no‑go rigs, depth gauges or simple visual inspection benches. Where throughput and uptime are priorities, a standardised gauge pin such as this reduces decision time on shop floors and supports consistent assembly quality without extensive retraining. Built for workshop environments and straightforward use Tagged as a workshop version, the construction emphasises durability for daily handling and fixture use. The cylindrical geometry and close dimensional control simplify integration into routine inspection sequences, whether as a reference for bore checks, plug fits or end‑dimension confirmations. For operations preferring tried‑and‑tested mechanical references over electronic probes, the pin acts as a low‑complexity, high‑reliability standard that complements existing metrology kits. Contact Metav Werkzeuge for batch availability and technical advice — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.A63 GTIN: 4061905064746 ECLASS: 21170231 Brand: Metav IndustryLine Material: Spezial‑Stahl Feature: Workshop version Weight: 0.1 kg SKU: M323.A63 Core dimensions & accuracy Nominal diameter: 10.63 mm Length: 50 mm Declared accuracy: ±0.002 mm Displayed measurement resolution: not applicable Design & special features Single gauge pin configuration End‑measure application (endmass) Robust finish suitable for workshop use Supplied as individual piece FAQ What is the primary use of this pin gauge? The pin gauge M323.A63 is used for end‑measurement and diameter verification, commonly employed for quick go/no‑go checks and fit confirmation in workshop inspection routines. Is the material suitable for repeated shop‑floor use? Yes; the gauge pin is manufactured from special steel, which provides a stable reference surface for repeated measurements and handling in workshop environments. What tolerance can be expected from this gauge pin? The product carries a declared machining tolerance of ±0.002 mm, making it suitable for applications that require tight dimensional control. Can this pin be used as a master for calibration of other instruments? As a mechanical reference, the pin gauge offers a reproducible nominal diameter; for formal calibration of instruments, traceable standards and documented calibration procedures should be used in line with company policy. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.64mm Test Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of precise repeatability and robust workshop design: the pin's ±0.002 mm tolerance and special steel construction deliver reliable end‑measure checks with minimal setup time. Order the gauge pin directly via Metav Werkzeuge or consult the Metav team for application advice. Gauge pin M323.A64 — 10.64 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin designed for precise end‑measure verification and fixture setting in workshop inspection and toolmaking environments. Precision tolerance ±0,002 mm 50 mm effective length Special steel workshop version Supplied in a transport box Repeatable measurement where it matters The inspection pin offers a defined diameter of 10.64 mm with a verified ±0.002 mm tolerance, providing a reproducible reference for go/no‑go checking, alignment and fixture set‑up. Such repeatability reduces rework and inspection time by enabling clear go/no‑go criteria; the tight tolerance is suitable for high‑accuracy bench checks and small‑batch production control. The measured specification ensures compatibility with conventional gauge holders and basic datum gauges. Built for everyday workshop use Constructed as a workshop version from special steel, the pin balances hardness and toughness for frequent handling and contact with tooling and jigs. The 50 mm长度 offers a practical shaft for clamping or seating in fixtures while keeping the contact area accessible for visual confirmation. The robust finish resists light abrasion and preserves the calibrated diameter over repeated cycles, which supports steady inspection routines on the shop floor. Practical handling, transport and storage Delivery in a transport box protects the pin during storage and transit and simplifies organisation of inspection kits. The compact, single‑piece design minimises handling complexity and the 50 mm shaft length is compatible with most bench jigs and insert seats. Where fast interchange is required, the straightforward cylindrical geometry facilitates quick seating and withdrawal without additional adapters, making the item a convenient tool in recurring measurement tasks. Efficiency and process integration As a standard gauge pin, this component serves as a dependable hard reference for end‑measure checks, fixture alignment and manual verification steps in assembly or maintenance workflows. The simple geometry permits rapid comparison operations and, when combined with systematic inspection routines, contributes to measurable time savings and fewer measurement disputes. Traceable labelling (SKU and GTIN) supports inventory control and audit trails within quality systems. For precise workshop checks, request the Metav IndustryLine gauge pin M323.A64 from Metav Werkzeuge — technical advice and local supply from Emmerich are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M323.A64 GTIN: 4061905064753 Category: Gauge pins Label: Gauge pin, single, 10.64 mm diameter, 50 mm length Facts Diameter: 10.64 mm Length: 50 mm Weight: 0.1 kg Tolerance: ±0.002 mm Special features Material: special steel Version: workshop execution Delivery: transport box for safe transport Use case: end‑measure checks and fixture setting FAQ What is the diameter and length of this pin? The gauge pin M323.A64 has a diameter of 10.64 mm and a shaft length of 50 mm. What tolerance is guaranteed for the pin? The inspection pin is specified to a tolerance of ±0.002 mm, suitable for fine workshop checks and alignment tasks. What material is the pin made from and how durable is it? Made from special steel, the pin is designed as a workshop version for repeated handling and routine inspection use. Is the pin supplied ready for transport and storage? Yes, the gauge pin is supplied in a transport box to protect the diameter and surface during transit and storage. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.65mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Benefit from the combination of high dimensional accuracy ±0.002 mm, robust special steel construction and a compact 50 mm length for reliable end‑measure and go/no‑go checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.A65 — Gauge pin, Ø 10.65 mm, 50 mm length (Metav IndustryLine) A gauge pin M323.A65 designed for precise end‑measure verification and fixture set‑up in workshop and inspection environments. High dimensional accuracy ±0.002 mm Diameter 10.65 mm for precision fits 50 mm hardened special steel length Precision where accuracy prevents rework The pin delivers a measured tolerance of ±0.002 mm, ensuring that critical fits and end‑measure checks are reproducible across repetitive sampling. This level of precision reduces the need for secondary adjustment and supports efficient go/no‑go decisions in the inspection routine. The 10.65 mm diameter corresponds to common clearance and plug checks, making the component suitable for final gauging and end‑of‑line verification tasks. Built for everyday workshop use Manufactured in special steel with a 50 mm usable length, the pin is provided in a practical workshop design that tolerates frequent handling and fast cycle checks. The compact format keeps the weight low while retaining rigidity for short‑range measurements, so operators can complete checks quickly without compromising stability. Delivery includes a transport case (plastic or wooden) that protects the pin during storage and transit, preserving its calibrated condition and surface quality. Simple integration into inspection workflows The smooth cylindrical geometry and standard diameter allow the pin to be used directly in fixtures, alignment tools and manual comparators. Labelling with SKU and GTIN simplifies inventory and traceability in quality systems. Where process documentation is required, the pin’s defined dimensions and declared accuracy support consistent measurement protocols and clear acceptance criteria, helping to reduce ambiguous tolerancing decisions on the shop floor. Contact Metav Werkzeuge today for stock availability and practical advice on integrating the Metav IndustryLine gauge pin into existing inspection setups — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.A65 GTIN: 4061905065453 Brand: Metav IndustryLine Facts Diameter: 10.65 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.10 kg Special features Material: special steel Workshop version design Delivered in transport case (plastic or wooden) Intended use: end‑measure checks and fixture gauging FAQ Is the diameter suitable for standard plug‑gauge checks? The diameter of 10.65 mm makes the pin suitable for common plug and clearance verifications and for use in fixtures requiring that nominal size. What level of accuracy can be expected during routine checks? With a declared accuracy of ±0.002 mm the M323.A65 provides the repeatability required for reliable go/no‑go decisions and final inspection sampling. Can the pin be used directly in alignment jigs? Yes. The robust finish and cylindrical geometry allow direct use in alignment jigs and manual comparators for rapid setup and verification. How is the pin supplied to ensure condition on arrival? The gauge pin is supplied in a protective transport case (plastic or wooden) to safeguard surface quality and dimensional integrity during transit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.66mm Test Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of a precise workshop-grade gauge pin with a small footprint and high repeatability; the M323.A66 delivers controlled end‑dimension checks thanks to its 10.66 mm diameter and a fine ±0.002 mm tolerance. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Metav IndustryLine Gauge Pin M323.A66 — 10.66 mm diameter, 50 mm length The Gauge pin, single, 10.66 mm, length 50 mm is a workshop-grade end-dimension gauge designed for fixture set-up and go/no‑go checks in metalworking and inspection cells Workshop-grade construction Diameter 10.66 mm, length 50 mm Tolerance ±0.002 mm Reliable checks for routine inspection The compact gauge pin serves as a straightforward, repeatable reference for end‑dimension verification. With a 10.66 mm diameter and a 50 mm working length, the component provides a stable contact area that minimises bending and measurement scatter during insertion and withdrawal. The declared ±0.002 mm deviation positions this pin for precision tasks where tolerances are tight but caliper-level equipment remains practical. The result is faster decision cycles at the inspection bench and fewer reworks on production lines. Robust workshop performance and handling Made from special steel, this single test pin is manufactured to resist surface wear and maintain form under frequent use. The workshop-grade execution balances hardness and toughness so that fixtures, jigs and holding devices can be set up with confidence. Its modest mass and ergonomic dimensions make manual handling straightforward during batch set-up, while the material choice supports longevity under typical shop conditions. This combination reduces downtime and keeps throughput steady in small-batch and series production. Integration, traceability and practical applications The pin is suitable for use as a reference plug in assembly checks, alignment tasks and end‑dimension control of turned or milled parts. Marked with the SKU M323.A66, the item is easy to reference in inventory systems and work orders. Where repetitive insertion cycles occur, the smooth finish and dimensional stability help preserve mating bore quality. For workshops looking to standardise inspection points across machines, this pin provides a compact, reliable datum that complements existing gauges and handheld measuring tools. Contact Metav Werkzeuge for application guidance on the Metav IndustryLine gauge pin M323.A66 — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com to discuss suitability for specific fixtures and production workflows Technical data Article number: M323.A66 GTIN: 4061905065460 Brand: Metav IndustryLine Facts Diameter: 10.66 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop version suitable for fixture and end‑dimension checks Intended use: end dimensions / reference plug FAQ What is the intended use of this gauge pin? The gauge pin M323.A66 is intended for end‑dimension verification, fixture set‑up and go/no‑go checks in workshop inspection and assembly operations. Is the M323.A66 suitable for repeated insertion into hardened bores? Yes, the pin is made from special steel and designed for workshop use; however, matching bore hardness and lubrication strategy should be considered to avoid accelerated wear. How precise is the gauge pin for inspection tasks? The M323.A66 carries a tolerance of ±0.002 mm, making it suitable for precision checks where sub‑thousandth‑millimetre repeatability is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.67mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop-grade construction, high dimensional accuracy (±0.002 mm) and compact handling for precise end‑measurement tasks; Order the (test pin) directly via (Metav Werkzeuge) or ask our consultants if needed Test pin M323.A67 — precision 10.67 mm diameter, 50 mm length (Metav IndustryLine) A single test pin for precise end‑measurements and fixture checks in workshop environments, designed for repeatable dimensional control. Workshop-grade construction Diameter 10.67 mm precision fit Length 50 mm for fixture checks Accuracy ±0.002 mm Precision where it counts: consistent end‑measurement control The compact test pin is engineered for repeatable end‑measurement and go/no‑go checking in everyday workshop workflows. With a diameter of 10.67 mm and a length of 50 mm, the component falls into the Micro measurement class (10–100 mm), which combines rigidity with a size that is easy to handle when checking small assemblies or jig interfaces. The indicated accuracy of ±0.002 mm supports fine tolerance verification and reduces uncertainty in routine inspections, providing a reliable reference point in production control. Smooth integration into fixtures and gauges for efficient checks Built as a workshop‑grade single pin, this item is suitable for mounting in test fixtures or using as a reference probe during assembly verification. The special steel construction ensures good wear resistance and dimensional stability under normal workshop conditions; the modest weight of 0.1 kg aids quick repositioning and handling. Because the design focuses on a clear functional purpose, measurement and inspection processes become more efficient: fewer tool changes, faster cycle times and stable results for repetitive tasks. Practical advantages for quality assurance and traceability Beyond the immediate measurement benefit, the simple geometry and standard dimensions make the pin a low‑effort addition to a quality toolbox. The product's compact form factor supports quick visual and tactile checks while the precise diameter and straightness allow it to serve as a reliable gauge for final dimensions. For teams aiming to democratise precision in the workshop, this pin offers a cost‑effective way to secure repeatable checks without complex equipment. Contact Metav Werkzeuge today for ordering information or technical advice on Metav IndustryLine precision test pins and workshop gauges Technical data Article number: M323.A67 GTIN: 4061905065477 Manufacturer: Metav IndustryLine Weight: 0.1 kg Material: Special steel Facts Diameter (mm): 10.67 Length (mm): 50 Accuracy: ±0.002 mm Special features Workshop version Single test pin delivery Category: Test pins Precision class: Micro (10–100 mm) FAQ What is this test pin designed for? The Metav IndustryLine test pin M323.A67 is intended for end‑measurement checks, fixture verification and simple go/no‑go tasks in workshop and production environments. What accuracy can be expected from the pin? The component is specified with an accuracy of ±0.002 mm, suitable for fine tolerance checks and repeatable dimensional control in small assemblies. Which material is used for the pin and what does that mean? The pin is made of special steel, providing good wear resistance and dimensional stability for standard workshop use. Is the pin delivered as a single item or as part of a set? This item is supplied as a single test pin suitable for immediate use in fixtures or as a reference probe. Can this pin be used in existing fixtures and gauges? Yes — the standard diameter and length make it straightforward to integrate into common fixture designs for routine verification tasks. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.68mm Gauge Pin, Single, 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop‑grade robustness, ±0.002 mm tolerance and a compact 10.68 mm diameter for reliable end‑dimension checks; this precision component supports repeatable inspection routines and shortens setup time in production control. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.A68 (10.68 mm Ø, 50 mm length) – Metav IndustryLine A Gauge pin M323.A68 designed for end‑measurement and reference checks in workshop metrology, ideal for plug and bore verification as well as fixture alignment tasks. Workshop‑grade precision design Diameter 10.68 mm, length 50 mm Tolerance ±0.002 mm for tight checks Hardened special‑steel construction Engineered for dependable end‑dimension control The compact, single‑piece check pin offers a 10.68 mm nominal diameter with a 50 mm working length, providing a stable reference for go/no‑go verification and fixture set‑up. With a specified ±0.002 mm tolerance, the pin is suited to quality control tasks that demand fine repeatability; the tight tolerance reduces uncertainty when verifying bore sizes or mating features. The special steel construction combines wear resistance with dimensional stability under routine contact checks, extending service life and preserving inspection accuracy. Practical integration into workshop inspection routines Designed as a pragmatic tool for production and maintenance environments, this gauge pin simplifies go/no‑go sequences and manual measurement comparisons. The single‑pin format requires minimal handling and fits common test fixtures and gauges; as a result, cycle times for simple checks are shortened. The hardened surface and true cylindrical form allow for consistent seating and alignment during repetitive use, supporting faster decision making on the shop floor and fewer secondary adjustments during assembly verification. Quality assurance and traceability for everyday use Manufactured under the Metav IndustryLine label, the pin supports routine calibration procedures and parts inspection standards. The clear specification of ±0.002 mm provides an objective basis for acceptance criteria in inspection logs and production documentation. Lightweight and compact, the component is easy to store and transport between stations while maintaining the workshop‑grade durability required for frequent handling. For bespoke inspection setups, the pin's predictable behaviour during seating and measurement reduces variability and contributes to a stable quality record. For precise end‑dimension control and reliable workshop inspection, choose the Metav IndustryLine gauge pin and contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com to confirm suitability for specific applications Technical data Article number: M323.A68 SKU: M323.A68 GTIN: 4061905065484 Brand: Metav IndustryLine Key figures Diameter: 10.68 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Design & features Material: Special steel Type: Single gauge pin / check pin Application: End‑dimension checks, plug and bore verification Workshop version FAQ What inspection tasks is this gauge pin suited for? The gauge pin is designed for end‑dimension checks such as bore verification, fixture alignment and go/no‑go tests; the Metav IndustryLine M323.A68 is intended where a compact reference diameter is required. Is the tolerance suited to precision measurement in production control? Yes, the specified ±0.002 mm tolerance for the M323.A68 supports tight inspection criteria and repeatable manual checks within standard workshop and production QC processes. What material and hardening can be expected? The M323.A68 is made from special steel with a hardened surface, chosen to deliver wear resistance and stable dimensional behaviour during frequent seating and contact checks. Can the gauge pin be used in automated inspection fixtures? The single‑piece, true‑cylindrical geometry of the check pin allows integration into fixtures and manual or semi‑automatic inspection setups; confirm fixture compatibility with Metav Werkzeuge for specific automation requirements. How is the part identified for inventory and traceability? Identification is provided via SKU M323.A68 and GTIN 4061905065484, enabling clear traceability in inspection records and stock systems. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.69mm Gauge Pin 50mm Workshop Version - Metav IndustryLine
Take advantage of precise dimensional control and robust workshop design to streamline inspection and reduce rework. The combination of a nominal Ø 10.69 mm, a tight ±0.002 mm tolerance and a compact 50 mm length ensures reliable go/no‑go and reference checks in daily production; order directly via Metav Werkzeuge or contact their consultants for application advice. M323.A69 Gauge pin — single, Ø 10.69 mm, length 50 mm (Metav IndustryLine) A M323.A69 gauge pin intended for quick dimensional checks and go/no‑go testing in workshop metrology, supplied as a single precision pin for straightforward integration into inspection routines Single gauge pin, nominal Ø 10.69 mm Precision tolerance ±0.002 mm 50 mm special-steel shank for workshop use Robust workshop execution for daily handling Reliable tolerance for repeatable inspection The main benefit is consistent, measurable control: with a nominal diameter of 10.69 mm and a stated tolerance of ±0.002 mm, this pin provides a clear, objective reference for acceptance tests. Such a tight tolerance supports rapid go/no‑go decisions and reduces ambiguous measurements that can interrupt production flow. In practice, the precision pin shortens inspection time by removing the need for iterative checks and helps maintain throughput without sacrificing quality. Built for daily workshop conditions Constructed from special steel and offered in a workshop version, the pin resists routine wear while remaining easy to handle on the shop floor. The 50 mm length gives a dependable reference length for many fixture and gauge arrangements without excess bulk, allowing single‑handed placement and quick repositioning. The compact, robust design lowers the risk of accidental damage during frequent use and supports long service life under normal operational stresses. Practical uses and handling advantages As a single‑unit gauge pin, the M323.A69 fits directly into fixture holes, control benches and comparator setups for immediate verification tasks. It functions as a tactile and dimensional standard for quick entry/exit testing, alignment checks and simple calibration routines. The plain cylindrical form makes cleaning and visual inspection straightforward, while the nominal diameter facilitates compatibility with common locating and checking fixtures used in general mechanical and toolroom environments. Traceability and integration into workflows The product is supplied with clear identification for traceability and inventory management, allowing easy matching with inspection records and process documentation. Using a dedicated gauge pin as a reference element helps to formalise quality routines and ensures measurable results during incoming inspection, in‑process control or final checks. The combination of durability, defined tolerance and compact format makes this pin a practical asset in standardised inspection sequences. For workshop‑grade, precision reference hardware from Metav IndustryLine, request the M323.A69 through Metav Werkzeuge — contact the Emmerich team for product matching and delivery at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M323.A69 GTIN: 4061905065491 Label: Prüfstift, einzeln, 10,69 mm Länge 50 mm Facts Nominal diameter: 10.69 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Version: workshop execution Supply: single gauge pin FAQ What tolerance does the gauge pin provide? The M323.A69 gauge pin is specified with a tolerance of ±0.002 mm, suitable for precise go/no‑go checks and dimensional reference use. What material is the pin made from? This gauge pin is manufactured from special steel, selected for durability in workshop environments and straightforward maintenance. Is the pin supplied as a single unit or as part of a set? The product is supplied individually as a single gauge pin under the designation M323.A69 for direct use or inclusion in custom fixtures. What are the typical applications for this gauge pin? Typical uses include quick dimensional checks, fixture alignment, go/no‑go testing and general workshop inspection tasks where a compact, accurate reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.6mm Test Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Benefit from the combination of high‑precision tolerance ±0.002 mm, robust special steel construction and a compact 50 mm length for reliable end‑measure checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for tailored application advice. Gauge pin, single – 10.6 mm diameter, 50 mm length (Metav IndustryLine) Gauge pin, single is a precision inspection pin engineered for end‑measure verification and fixture alignment in workshop and production environments High‑precision tolerance ±0.002 mm Diameter 10.6 mm with 50 mm length Made from special steel for workshop use Robust workshop version for daily inspection Precision that stabilises production control The gauge pin delivers ±0.002 mm accuracy in a compact form, enabling repeatable checks for components where end dimensions determine assembly fit. This level of precision supports tight process control and reduces the risk of rejects by providing a clear, objective reference during inline or batch inspections. In practical terms, the compact 50 mm length and 10.6 mm diameter make the pin suitable for small to medium‑sized bores and features, allowing technicians to verify final sizes quickly without elaborate set‑ups. Built for workshop durability and ease of handling Constructed from special steel and labelled as a workshop version, the inspection pin tolerates routine handling and retains measuring integrity under typical shop conditions. At approximately 0.1 kg the component is easy to position and manoeuvre in fixtures, while the single‑piece design simplifies inventory and replacement logistics. The straightforward geometry minimises the chance of setup error and shortens inspection cycles, delivering a tangible productivity benefit for quality control teams. Integrates simply into inspection routines and tooling The pin is intended for end‑measure verification, fixture alignment and use as a reference mandrel in gauging operations. Supplied as a single inspection pin, it complements existing gauge sets and can be used alongside comparators, go/no‑go fixtures or optical checks to confirm critical dimensions. For customers seeking reliable traceability or application advice, Metav Werkzeuge provides technical guidance to match the inspection pin to specific process requirements and measurement workflows. For dependable end‑measure verification choose the Metav IndustryLine gauge pin and contact Metav Werkzeuge in Emmerich for specification support and supply coordination Technical data Article number: M323.A60 GTIN: 4061905064715 Product name: Gauge pin, single, 10.6 mm diameter, 50 mm length Manufacturer: Metav IndustryLine Core specifications Diameter: 10.6 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Measurement range min: 10.6 mm Measurement range max: 10.6 mm Design & features Material: Special steel Version: Workshop execution Delivery: Single inspection pin Application: End‑measure verification FAQ What is the usable diameter and length of this inspection pin? The inspection pin has a diameter of 10.6 mm and a usable length of 50 mm, suitable for end‑measure checks and fixture alignment. What accuracy can be expected from this gauge pin? Manufactured to a tolerance of ±0.002 mm, the gauge pin provides high‑precision reference measurements for routine inspection tasks. Which material is used and is the pin suitable for workshop use? The pin is made from special steel and specified as a workshop version, designed to withstand daily handling in production environments. Is this pin supplied as a single item and how is it identified? Yes, the product is supplied as a single inspection pin and is identified as Article number M323.A60 with GTIN 4061905064715. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.71mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of accurate end‑dimension checks through the combination of 10.71 mm nominal diameter, a fine ±0.002 mm tolerance and a compact 50 mm length for reliable go/no‑go and fit verifications; order the gauge pin directly via Metav Werkzeuge or consult the team for application advice. Gauge pin M323.A71 — single test pin, 10.71 mm × 50 mm The Gauge pin M323.A71 is a workshop‑grade single test pin designed for precise end‑measure checks and repeatable fit verification in production and inspection environments. Workshop‑grade construction for daily use Diameter 10.71 mm with ±0.002 mm tolerance 50 mm usable length for end‑measure checks Made from special steel for durable wear resistance Improve production control with high repeatability The compact test pin delivers a measurable improvement in inspection consistency: with a nominal diameter of 10.71 mm and a documented ±0.002 mm tolerance, the component supports reliable go/no‑go evaluations and fine clearance checks. This level of precision reduces uncertainties during assembly trials and helps to lower scrap rates by catching out‑of‑tolerance conditions early. The specification is expressed in clear numerical terms so purchasing and quality teams can compare it directly against drawing tolerances and inspection plans. Built for workshop use and long service life Constructed as a workshop‑grade tool from special steel, the pin withstands repeated seating and withdrawal in fixtures and gauges. The 50 mm overall length provides sufficient engagement for secure measurements while remaining easy to handle in busy production areas; the modest mass supports quick manoeuvring and minimal operator fatigue. Material selection focuses on wear resistance and dimensional stability, which preserves the pin’s calibrated condition over many cycles and reduces the need for frequent replacement. Easy to integrate into existing inspection routines The pin is suitable for routine end‑dimension checks, in‑fixture validation and comparator use, complementing both manual and semi‑automated quality workflows. Traceable identification via the product code ensures clear record keeping for inventory and inspection logs, while the compact format fits standard pin holders and gauge blocks. By adding this precision component to a control plan, teams gain a simple, quantifiable tool that supports process capability assessments and helps maintain consistent product quality. Choose the Metav IndustryLine M323.A71 for dependable end‑measure checks and contact Metav Werkzeuge in Emmerich for procurement guidance and timely supply. Technical data Article number: M323.A71 GTIN: 4061905065514 Manufacturer: Metav IndustryLine Facts Diameter: 10.71 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop version Category: gauge pin / test pin Accuracy grade suitable for fine fit and end‑measure checks FAQ What inspection tasks is this pin suitable for? The M323.A71 gauge pin is intended for end‑dimension checks, fit verification and go/no‑go evaluations in workshop and production settings. Is the M323.A71 compatible with standard pin holders and fixtures? Yes, the single test pin is designed to fit common holders and comparator fixtures used for plug‑type checks. What does the ±0.002 mm specification mean for daily use? A tolerance of ±0.002 mm indicates the allowable deviation from the nominal 10.71 mm diameter and supports high repeatability for fine clearance and assembly verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.72mm Gauge Pin Single 50mm Length Workshop Finish - Metav IndustryLine
Compact, workshop-ready gauge pin that pairs repeatable measurement with a fine ±0.002 mm tolerance and a robust special‑steel construction; ideal for routine end‑size checks and fixture inspections. Order the component directly via Metav Werkzeuge or consult their product specialists for integration into existing gauge sets. M323.A72 — Gauge pin (10.72 mm Ø, 50 mm length) by Metav IndustryLine M323.A72 is a single gauge pin designed for precise end‑size verification and confined inspection tasks in workshop environments. Workshop‑grade construction Diameter 10.72 mm precision Length 50 mm compact checks Tolerance ±0.002 mm accuracy Reliable precision for routine verification Manufactured for consistent results, this gauge pin delivers a measured diameter of 10.72 mm with an indicated variation of ±0.002 mm, making it suitable for fine verification tasks where reproducibility matters. Classified in the micro range for measuring tools (10–100 mm), the component combines short overall length with stable geometry to reduce measurement uncertainty during frequent use. The stated tolerance supports quality control processes that demand clear pass/fail criteria without over‑specifying equipment capability. Durable build for workshop environments The measuring pin is produced from special steel, specified to provide dimensional stability under regular handling. The workshop version is intended for daily use in production and maintenance settings where tools are subject to frequent insertion and removal. Its modest mass contributes to easy handling while retaining sufficient rigidity for repeatable end‑face contact checks. The construction focuses on practical longevity rather than claiming specific surface treatments or heat‑treatment grades beyond the stated material. Compact dimensions for confined checks and fixtures With a 50 mm overall length and a compact diameter, this inspection pin fits into tight bores and assembly jigs where larger gauges would be impractical. Compact format facilitates quick in‑process checks and can be mounted in holders or test fixtures for comparative or go/no‑go inspections. The small footprint supports ergonomic handling during batch inspections and reduces the risk of interference in complex assemblies. Integrates easily into existing verification workflows Designed as a single, stand‑alone gauge pin, the unit is compatible with common workshop fixtures and gauge sets used for end‑size confirmation. The clear specification data—diameter, length and tolerance—allows straightforward incorporation into inspection plans and measurement logs. For traceability, the item is listed under SKU M323.A72 and can be referenced in quality documentation or parts lists to ensure consistent procurement and replacement. Discuss Metav IndustryLine gauge pin options with Metav Werkzeuge to confirm fitment and to arrange supply tailored to inspection routines. Technical data Article number: M323.A72 GTIN: 4061905066184 Label: Test pin, single, 10.72 mm diameter, 50 mm length Numbers / Core technical data Diameter: 10.72 mm Length: 50 mm Mass: 0.10 kg Accuracy/variation: ±0.002 mm Special features / Materials Material: Special steel Version: Workshop execution Category: Gauge pins (Messstifte) Application: End‑size checks FAQ What are the exact dimensions of the pin? The pin measures 10.72 mm in diameter with a total length of 50 mm; it is listed as SKU M323.A72. What accuracy can be expected during checks? The specified variation is ±0.002 mm, which supports precise go/no‑go and comparative measurements in routine inspection tasks. Which material is used for this gauge pin? The component is made from special steel, provided for dimensional stability appropriate to workshop use. Is this pin suitable for fixture mounting and jigs? Yes, the compact 50 mm length and standard cylindrical geometry make it suitable for mounting in common fixtures and gauge holders used for end‑size verification. Can this item be referenced in quality documentation? The SKU M323.A72 and GTIN 4061905066184 allow unambiguous identification for procurement and quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.73mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Precision-ground construction and a tight ±0.002 mm tolerance make this single gauge pin a reliable reference for end-dimension checks; combined with its compact 10.73 mm diameter and 50 mm length, the component supports repeatable measurements in fine mechanical setups. Order directly via Metav Werkzeuge or request technical advice from our specialists to ensure seamless integration into existing inspection routines. Gauge pin, single — 10.73 mm diameter, 50 mm length (Metav IndustryLine) Gauge pin, single — 10.73 mm diameter, 50 mm length is a compact, workshop-grade reference pin intended for precise end-dimension inspection and fixture checks. Precision ground Ø 10.73 mm Length 50 mm for compact reference Tight tolerance ±0.002 mm Workshop-grade special steel construction Engineered for repeatable reference measurements The component is precision-ground to deliver a repeatable datum for end-stop and go/no-go fixtures. With a declared accuracy of ±0.002 mm, the pin supports tight control limits in production checks and quality assurance procedures, reducing uncertainty during frequent measurements. The combination of geometric stability and minimal surface deviation helps to shorten inspection cycles by providing an immediate, verifiable reference without additional alignment steps. Compact dimensions that suit fine mechanical work Placed in the micro measurement category, the pin’s 10.73 mm diameter and 50 mm length are tailored to fine mechanical and toolroom applications where space is limited but precision remains critical. The compact form factor preserves stiffness while allowing easy handling in jigs, gauges and small-bore checks. For workshops and small-series production, the size offers the best compromise between reach and rigidity, enabling rapid insertion and removal during assembly or verification tasks. Robust material and workshop design for daily use Manufactured from special steel with a workshop-focused finish, the pin withstands repetitive use in demanding environments. The workshop-grade execution emphasises durability and serviceability, making it suitable for frequent contact with hardened seats and gauge bodies. As an individual test pin, it functions as a reliable end dimension reference within inspection benches and fixture setups, helping to maintain consistent part quality across production batches. Contact Metav Werkzeuge in Emmerich to discuss how the Metav IndustryLine gauge pin (SKU M323.A73) can be specified for inspection jigs or to request a tailored quotation — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical Data Article number: M323.A73 GTIN: 4061905066580 Label: Prüfstift, einzeln, 10,73 mm Länge 50 mm Brand: Metav IndustryLine Numbers Diameter: 10.73 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop version Material: Special steel Single test pin (individual delivery) Intended use: end-dimension reference FAQ What tolerance does this gauge pin offer? The gauge pin delivers a declared tolerance of ±0.002 mm, specified for the Metav IndustryLine gauge pin (SKU M323.A73) to ensure tight control in inspection routines. Is the pin suitable for fixture and jig reference points? Yes. The pin’s precision-ground surface and compact 10.73 mm × 50 mm format make it suitable as a reference in jigs, gauges and small-bore fixtures. Which material is used for this test pin? The Metav IndustryLine test pin is produced from special steel, chosen for wear resistance and stability under frequent contact. Can this pin be used for end-dimension verification in small-series production? Absolutely. Its compact size and tight tolerance are designed for repeatable end-dimension checks in fine mechanical and small-batch production environments. What is the intended application described by 'endmasse'? The storytrigger 'endmasse' refers to its role as an end-dimension reference pin used for final size checks and go/no-go validation in inspection setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.74mm Gauge Pin, Single, 50mm Length Workshop Version - Metav IndustryLine
Take advantage of precise end‑measure control, robust workshop design and a compact 50 mm length for seamless inspection workflows; the combination of Ø 10.74 mm diameter, ±0.002 mm accuracy and special steel construction ensures dependable reference measurements — order directly via Metav Werkzeuge or consult our specialists for application advice. Test pin M323.A74 — Test pin, Ø 10.74 mm, 50 mm length (Metav IndustryLine) Test pin M323.A74 for end‑measure checks and fixture alignment in inspection and assembly applications Workshop version for daily shopfloor use Diameter 10.74 mm for exact end dimensions Accuracy ±0.002 mm for repeatable reference measurements Special steel construction for durability and wear resistance Consistent reference precision for inspection tasks The M323.A74 test pin is engineered as a compact reference element for end‑measurement and alignment operations. With a nominal diameter of 10.74 mm and a measured length of 50 mm, the pin supplies a stable contact geometry that reduces variation when checking final dimensions. The specified ±0.002 mm accuracy provides a tangible improvement in repeatability compared with general inspection probes, supporting tighter control limits and more reliable pass/fail decisions. Built-in dimensional stability from the special steel material minimises wear over repeated cycles, extending useful service life. Robust workshop design that keeps processes moving Designed as a workshop version, this test pin tolerates routine handling and integration into fixtures and test benches. The moderate mass (approx. 0.1 kg) and compact 50 mm length make it easy to position while maintaining the rigidity required for consistent contact. Supplied as a single item in a protective transport box, the component arrives ready for secure storage and immediate use, which reduces setup time and prevents damage in transit. This practical approach to design supports continuous production and lowers the frequency of replacement. Practical integration into quality workflows The cylindrical contact geometry and exact diameter make the pin suitable for end‑gauging, alignment checks and fixture setting in small to medium assemblies. Its straightforward form factor simplifies fixture design and inspection routines, so the element can be used as a fixed reference or an interchangeable gauge insert. Metav IndustryLine's quality assurance ensures consistent batch conformity from stock in Emmerich, helping to maintain supply security for routine inspection tools. For specialised applications, Metav's product experts can advise on fitment and usage scenarios to match process requirements. Contact Metav Werkzeuge for purchase or application advice and order the Metav IndustryLine test pin (Ø 10.74 mm, 50 mm) directly from our Emmerich stock Technical data SKU: M323.A74 GTIN: 4061905066597 Label: Test pin, single, 10.74 mm length 50 mm Category: Test pins (Messstifte) Facts Diameter: 10.74 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Measurement range (max): 10.74 mm Special features Material: special steel Workshop version Supplied single item Delivered in protective transport box FAQ What tolerance can be expected from this test pin? The M323.A74 test pin is specified with an accuracy of ±0.002 mm, offering high repeatability for end‑measure checks in workshop environments. Is the pin suitable for fixture alignment in assembly jigs? Yes, the test pin’s compact 50 mm length and precise 10.74 mm diameter make it well suited as a reference element for fixture alignment and setting tasks. In what condition is the pin supplied? The Metav IndustryLine test pin is supplied as a single item, securely packed in a protective transport box to prevent damage during storage and transport. Can this test pin be used for repeated contact measurements without rapid wear? Constructed from special steel, the pin offers improved wear resistance for repeated contact cycles; proper handling and storage further extend service life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.75mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.002 mm repeatability, special steel construction and a compact 50 mm shaft for reliable end‑dimension control in precision workshops — delivered in a protective transport case for safe handling. Order the gage pin directly via Metav Werkzeuge or ask our consultants if needed. Gage pin M323.A75 — test pin, Ø 10.75 mm, 50 mm length (Metav IndustryLine) The gage pin M323.A75 is a compact, workshop‑grade test pin for precise end‑dimension verification and fixture checks High repeatability ±0.002 mm Special steel for wear resistance 50 mm shaft length for stable handling Supplied in protective transport case Precision where small tolerances matter This compact test pin is built for applications that demand consistent, measurable results: with a declared tolerance of ±0.002 mm, the component provides very fine reproducibility for go/no‑go checks, plug gauges and fixture verification. The combination of a short 50 mm shaft and special steel reduces flex and wear during repetitive measurements, which translates into fewer re‑checks and higher throughput on inspection benches. Such a level of accuracy supports tight quality routines in small series production and fine mechanical assembly. Designed for fine mechanical and workshop use Classified in the micro measurement range (10–100 mm), the pin is optimised for end‑dimension control of small components and mating parts. The workshop version construction makes it robust for daily use while remaining easy to position in jigs and fixtures. Supplied in a protective case, the test pin stays transport‑safe and prepared for use on the shop floor — a practical choice where handling and storage affect long‑term traceability and component condition. Practical handling and compatibility with inspection routines The modest weight (0.1 kg) and compact geometry enable straightforward manual deployment in measurement sequences and simple fixture applications. The design supports rapid visual and tactile checks and integrates well into tactile gaging systems or comparative inspection benches. Where reproducible end‑measurements are required, this gage pin offers a durable, low‑maintenance solution that reduces process variation and supports consistent quality documentation. Consult Metav Werkzeuge for specification matching and to confirm suitability for intended inspection tasks — our team can advise on integration and supply Technical data Article number: M323.A75 GTIN: 4061905062926 Brand: Metav IndustryLine Facts Diameter: 10.75 mm Length: 50 mm Measuring range: 10.75 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Workshop execution Protective transport case included Material: special steel Category: test pins / gage pins FAQ What tolerance can be expected from this test pin? The gage pin M323.A75 is specified with a tolerance of ±0.002 mm, making it suitable for fine inspection tasks where very small deviations must be detected. Which material is used for the pin? This test pin is manufactured from special steel, chosen for wear resistance and durability in repetitive measurement cycles. Is the pin supplied ready for use in the workshop? Yes, the item is delivered in a protective transport case and presented as a workshop version to withstand daily handling on inspection benches. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.76mm Test Pin Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of high dimensional accuracy ±0.002 mm, robust special steel construction and a protective transport case for dependable workshop inspection routines; order directly via Metav Werkzeuge or ask the consultants for application advice. Test pin, single, 10.76 mm Ø, 50 mm length — Metav IndustryLine The test pin, single, 10.76 mm Ø, 50 mm length is a compact end-gauge for precise dimensional checks in workshop inspection and end-measurement tasks. High dimensional accuracy ±0.002 mm Special steel for robust service Workshop execution with durable finish Delivered in a protective transport case Reliable precision for end-measurement checks This compact inspection aid offers ±0.002 mm repeatability, making it suitable for demanding workshop control where small tolerance deviations matter. Classified in the micro range (max measuring span 10–100 mm), this design prioritises stiffness and stability in a short format, which reduces bending and operator-induced error during short-span checks. The defined diameter of 10.76 mm is intended for direct verification of bore or pin fits and provides a clear, measurable reference for go/no-go assessments or fixture set-ups. The measured tolerance figure is a practical indicator of expected variation under normal workshop use and supports faster decision-making on the shop floor. Robust construction and practical handling Constructed from special steel, the device resists wear and maintains a consistent gauge surface even under frequent use. The 50 mm overall length balances reach with ease of handling; at 0.1 kg the component is light enough for single-handed use yet sufficiently massed to sit stably in comparison fixtures. The workshop execution indicates a finish and hardening process tailored for everyday industrial environments rather than delicate laboratory conditions. Delivery in a protective transport case safeguards the pin during storage and transport, reducing the risk of accidental damage and preserving measurement integrity across shifts. Integration into inspection routines and compatibility Designed as an end-measurement stub for visual and mechanical checks, the pin functions well with comparator stands, gauge blocks and bench fixtures to speed up routine verification. The simple geometry minimises fixturing complexity and enables reproducible seating in bores and gauges. By using a standardised diameter and overall length, the component fits established inspection workflows and reduces set-up times, contributing to improved throughput and lower risk of rejected parts due to measurement uncertainty. The product is supplied under the Metav IndustryLine range and is identified by SKU M323.A76 for ordering and inventory purposes. Contact Metav Werkzeuge to secure the Metav IndustryLine test pin M323.A76 with ±0.002 mm accuracy and a protective transport case for reliable workshop inspection support Technical data Article number: M323.A76 GTIN: 4061905062933 Manufacturer: Metav IndustryLine Facts Diameter: 10.76 mm Overall length: 50 mm Accuracy / tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop execution Delivered in protective transport case FAQ Is this test pin suitable for precision bore checks? Yes. The test pin is intended for bore and fit verifications where a fixed diameter reference of 10.76 mm and an accuracy of ±0.002 mm are required. Can the pin be used in standard comparator stands? Yes. The simple cylindrical geometry and 50 mm length make the pin compatible with common comparator fixtures and gauge holders. What does "workshop execution" mean for durability? Workshop execution denotes a finish and treatment aimed at daily industrial use; the special steel provides enhanced wear resistance for routine inspection tasks. Is the test pin supplied with a certificate of calibration? The product is supplied as described; no calibration certificate is included unless explicitly specified in the product label or order data. Which SKU should be referenced when ordering spare test pins? Refer to SKU M323.A76 when ordering or enquiring to ensure the correct diameter and length are delivered. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.77mm Gauge Pin Length 50mm Workshop Finish, Special Steel - Metav IndustryLine
Take advantage of a compact inspection solution that combines high repeatability (±0.002 mm), a defined diameter of 10.77 mm, and a robust 50 mm length for reliable end‑measure checks; order this precision gage pin directly via Metav Werkzeuge or consult our specialists for application advice. Test pin (single) — 10.77 mm Ø, 50 mm length by Metav IndustryLine A single test pin designed for precise end‑measurement and inspection tasks in workshop and production environments. Workshop-grade design for regular use High-precision tolerance ±0.002 mm Fixed Ø 10.77 mm, length 50 mm Made from special steel for durability Precision that keeps production moving This inspection pin delivers consistently repeatable results thanks to its ±0.002 mm tolerance, which is suitable for fine inspection tasks where small deviations matter. The defined diameter of 10.77 mm and 50 mm length provide a stable reference for end‑dimension checks and go/no‑go comparisons. The tight tolerance reduces rework and supports traceable inspection routines, contributing to shorter inspection cycles and fewer production interruptions. Robust workshop design for everyday inspection Manufactured in a workshop version, this pin is built to withstand regular handling in industrial settings. The body is produced from special steel, offering resistance to wear and deformation while remaining compact and easy to use. At approximately 0.1 kg, the pin is light enough for manual positioning yet rigid enough to avoid flexing during typical end‑measure operations. The design balances durability with practical handling for quality control staff. Clear role in quality assurance workflows As a fixed-size inspection element, the pin simplifies fixture setups, alignment tasks and end‑face verification. Its defined geometry makes it a straightforward reference for comparative gauging and routine quality checks, improving throughput in inspection benches and assembly stations. Where reproducibility is needed, the stable dimensions and material choice help maintain measurement integrity over repeated cycles. For application-specific advice or to secure Metav IndustryLine inspection components for production use, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and supply options Technical data SKU: M323.A77 GTIN: 4061905062940 Manufacturer: Metav IndustryLine Facts Diameter: 10.77 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop version Category: Messstifte Label: Prüfstift, einzeln, 10,77 mm Länge 50 mm FAQ What is the intended use of this inspection pin? The test pin is intended for end‑measure checks and comparative gauging in workshop and production inspection tasks; the fixed Ø 10.77 mm and 50 mm length make it a reliable reference for such applications. How precise is the diameter specification? The inspection pin is manufactured to a tolerance of ±0.002 mm, which supports high repeatability for dimensional checks. Which material is used for the pin? The component is made from special steel, chosen to provide wear resistance and dimensional stability during regular inspection use. Can this pin be used in fixture and alignment setups? Yes; the fixed geometry and robust design allow straightforward integration into fixtures for alignment, go/no‑go checks and reference measurements. Is a calibration certificate supplied with the pin? A standard calibration applies; no ISO 17025 certificate is specified for this item in the available data. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.78mm Gauge Pin, 50mm Length, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
The combination of high workshop durability, ±0.002 mm manufacturing tolerance and a compact Ø 10.78 mm / 50 mm form factor delivers reliable end‑measurement results and reproducible fits in routine inspection tasks. Order this single gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.A78 — single gauge pin, Ø 10.78 mm, length 50 mm (Metav IndustryLine) A single gauge pin for workshop end‑measure checks and fit verification, specified at 10.78 mm diameter with a 50 mm overall length. Workshop‑grade precision ±0.002 mm Special steel for enhanced wear resistance Ø 10.78 mm, length 50 mm Single‑piece design for consistent end‑measure checks Reliable precision for everyday inspection tasks A compact inspection pin with ±0.002 mm manufacturing tolerance provides a reproducible reference for end‑measure and go/no‑go checks in production and maintenance environments. The fine tolerance means that clearance and interference fits can be verified with confidence, reducing the need for repeated rework and minimising stoppages. The small footprint of the pin supports tight access and makes it suitable for use in measuring fixtures, assembly jigs and quick verification stations. Built for workshop endurance and easy handling Machined from special steel, this workshop version is designed to resist wear during repeated insertions and withdrawals. The solid single‑piece construction offers dimensional stability and simplifies handling during rapid checks; the modest weight (0.1 kg) and standard length allow convenient mounting in fixture blocks or storage racks. Where repetitive checking is required, the durable surface finish helps maintain consistent contact conditions, which supports repeatable results across shifts and operators. Practical integration into quality procedures Supplied as an individual inspection pin, the item is ideal for end‑dimension control, seating tests and gauge stacks in standard metrology workflows. The clear nominal diameter of 10.78 mm and the concise physical specification facilitate traceability in inventory and work instructions; the product is listed under SKU M323.A78 for straightforward procurement and stock management. For precision control loops and assembly verification, the pin acts as a fast, deterministic reference that complements calipers and micrometres without replacing their broader measuring functions. Contact Metav Werkzeuge in Emmerich to confirm availability of the Metav IndustryLine gauge pin (M323.A78) and to discuss its fit for intended inspection setups Technical Data SKU: M323.A78 GTIN: 4061905062957 Eclass: 21170231 Brand: Metav IndustryLine Facts Diameter: 10.78 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop version Single gauge pin for end‑measure checks Compact form for fixture integration FAQ What inspection tasks is this pin intended for? The gauge pin (Metav IndustryLine, SKU M323.A78) is intended for end‑dimension checks, seating tests and quick fit verification in workshop and production settings. Is the diameter tolerance suitable for precision fits? Yes. The ±0.002 mm tolerance of the Metav IndustryLine gauge pin supports reproducible checks for clearance and interference fits within typical workshop inspection limits. What material is used and how does it affect durability? The pin is manufactured from special steel, which gives the Metav IndustryLine gauge pin improved wear resistance and consistent surface contact over many cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.79mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of a compact, workshop‑grade test solution that combines a diameter of 10.79 mm, a tight accuracy of ±0.002 mm and a sturdy 50 mm length for repeatable end‑measure checks; order the gauge pin directly via Metav Werkzeuge or consult the Metav advisers for batch supply and compatibility advice. Gauge pin M323.A79 — single test pin, Ø 10.79 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.A79 is a single, hardened test pin designed for precise end‑measure verification and fit checks in machining and inspection environments, presented as a workshop‑grade tool for rapid repeat checks and simple handling. Workshop version, robust design Diameter 10.79 mm with ±0.002 mm accuracy Single pin, 50 mm length Precision where it counts for repeatable checks Built for measurement tasks that demand small tolerances, this gauge pin offers a diameter of 10.79 mm with an indicated accuracy of ±0.002 mm, which ensures consistent results when used for go/no‑go fitting, end‑measure verification or reference checks. The tight deviation limit translates into fewer remeasurements and more reliable pass/fail decisions on the shop floor. The hardened construction from special steel provides wear resistance so that dimensional stability is maintained across repeated cycles, reducing downtime for replacement and supporting steady inspection throughput. Designed for workshop use and reliable handling As a workshop version, the test pin is engineered for everyday use in busy production or maintenance settings. Its 50 mm overall length and compact mass make it easy to position in jigs, gauges or manual fixtures, while the solid construction withstands routine handling. The single‑piece design simplifies storage and retrieval, supporting a lean inspection workflow: quick checks can be performed without complex setup, helping to shorten process times and keep production moving. Protective transport packaging is provided to preserve the surface and geometry during logistics and storage. Practical benefits for quality control routines Integration into existing inspection routines is straightforward: the pin serves as a verified reference for dimensional comparison and helps to speed up incoming inspection, in‑process checks and final acceptance tests. Using a hardened gauge pin with a defined tolerance reduces measurement uncertainty and supports documented quality records. The compact form factor also facilitates mobile inspection tasks, making this tool suitable where space is limited or portability is required. For procurement and inventory planning, the clear SKU and GTIN identification aid traceability and stock management in industrial environments. For batch supply, availability checks and technical enquiries about the M323.A79 gauge pin, contact Metav Werkzeuge in Emmerich to discuss delivery options and suitable quantities for production use. Technical data Article number: M323.A79 Label: Gauge pin, single, 10.79 mm, length 50 mm GTIN: 4061905063596 Facts Diameter: 10.79 mm Length: 50 mm Weight: 0.1 kg Accuracy (deviation): ±0.002 mm ECLASS: 21170231 Special features Material: special steel Workshop version Delivered in a transport box FAQ What applications is this gauge pin suitable for? The M323.A79 gauge pin is suitable for end‑measure checks, fit verification and routine go/no‑go comparisons in machining and inspection tasks. How precise is the test pin and what does the tolerance mean? The test pin has an accuracy of ±0.002 mm, meaning dimensional deviation is tightly controlled to support repeatable, high‑precision checks during quality control. Is the pin durable enough for repeated shop‑floor use? Made from special steel and supplied as a workshop version, the pin is designed for repeated handling and wear resistance in production and maintenance environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.81mm Gauge Pin, Single, 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop-grade construction, compact dimensions and ±0.002 mm repeatability for reliable end‑size checks in small bores; order directly via Metav Werkzeuge or consult our specialists for application advice. Test pin M323.A81 – gauge pin, 10.81 mm diameter, 50 mm length (Metav IndustryLine) A precision single gauge pin designed for end‑size verification and workshop inspection tasks, offering high repeatability in compact assemblies. Workshop-grade construction Diameter 10.81 mm, tight tolerance Length 50 mm for compact checks Tolerance ±0.002 mm Delivered in transport case Compact precision for small‑bore inspection The gauge pin is built for precise end‑size checking in confined spaces and small bores. Classified in the micro range for measuring tools (10–100 mm), its 10.81 mm diameter and 50 mm length combine to deliver a stable feel with minimal deflection during manual handling. The declared ±0.002 mm tolerance places this pin in a high‑precision class suitable for workshop inspection points where reproducible, measurable results matter. The special steel construction contributes to wear resistance and dimensional stability under normal workshop conditions. Practical benefits on the shop floor Designed as a workshop version, the pin supports fast go/no‑go gauging and assembly checks without complex fixturing. Its compact length and low mass enable quick insertion and removal, reducing cycle time for repetitive inspections while preserving accuracy. The delivery in a dedicated transport case protects the gauge during storage and transit, helping to maintain calibration and surface quality. Where traceable results are required, the robust tolerance specification simplifies documentation and acceptance criteria in quality protocols. Handling, longevity and integration Handling is straightforward: the pin’s geometry suits manual use and integration into simple fixtures or check plates. Constructed from special steel, it offers a balance between hardness and toughness for everyday workshop use. The light weight and compact profile make it easy to keep a set at the bench for immediate checks, reducing process interruptions. As part of the Metav IndustryLine, the component complements broader inspection toolsets and can be specified alongside other precision accessories for a consistent inspection strategy. For precise end‑size verification in small bores, request the Metav IndustryLine test pin M323.A81 from Metav Werkzeuge or contact our specialists at info@metav-werkzeuge.com to confirm suitability and delivery options Technical data Article number: M323.A81 GTIN: 4061905063619 SKU: M323.A81 Facts Diameter: 10.81 mm Length: 50 mm Weight: 0.1 kg Tolerance: ±0.002 mm Special features Material: Special steel Workshop design Delivered in transport case Category: Gauge pins (Messstifte) FAQ What is this test pin used for? This gauge pin is used for end‑size checking and small‑bore verification; the Metav IndustryLine test pin M323.A81 provides a compact reference diameter for inspection and assembly checks. Is the tolerance suitable for workshop quality control? Yes, the ±0.002 mm tolerance positions the pin for high‑precision workshop inspection where tight repeatability is required. Can the pin be stored with other gauges without risk of damage? The pin is supplied in a transport case to protect the surface and maintain dimensional integrity during storage and transport. Which materials is the pin made from? The pin is manufactured from special steel, chosen for its dimensional stability and wear resistance in typical workshop environments. Does this pin fit into standard check plates and fixtures? The 10.81 mm diameter and 50 mm length make it compatible with common small‑bore fixtures and handheld inspection tasks; consult Metav Werkzeuge for specific fixture integration advice. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.82mm Gauge Pin Single 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop-grade durability, tight tolerance of ±0.002 mm and the convenience of a protective transport case for reliable end‑dimension checks. Order the gauge pin directly via Metav Werkzeuge or consult our advisors for specification support. Gauge pin M323.A82 — 10.82 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin M323.A82 is a workshop-grade precision test pin designed for end‑dimension checks and fit verification in production and inspection tasks Workshop-grade construction Diameter 10.82 mm precision Tolerance ±0.002 mm Supplied in a protective case Faster inspection through dependable precision The gauge pin delivers consistent dimensional accuracy with a diameter of 10.82 mm and a stated tolerance of ±0.002 mm, enabling repeatable pass/fail checks on bores, dowel fits and assembly seats. As a single‑piece test pin made from special steel, it resists wear during frequent use; this reliability reduces rework and shortens inspection cycles, which translates directly into improved throughput and predictable quality control results. Built for workshop environments and everyday handling A 50 mm length and a compact design make the pin easy to handle at the bench or on a shop floor. The workshop-grade execution ensures robustness under routine handling, while the moderate mass supports stable seating during measurement tasks. Supplied in a protective case, the pin arrives ready for safe storage and transport, limiting damage and preserving the critical gauge diameter between uses. Practical fit verification and simple measurement logic As a straightforward test pin, the component is best used for go/no‑go style checks, trial fits and comparative gauging where basic functional verification is required rather than full dimensional reporting. The tight tolerance supports confident decisions in assembly and inspection steps and complements calipers or bore gauges when rapid throughput is a priority. For traceable inspection chains, the pin’s precise specification can be recorded alongside batch or job documentation. Selection and compatibility considerations The pin’s special steel construction offers a balance of hardness and machinability suited to general mechanical parts; it is intended for contact checks rather than abrasive applications. Its single‑piece format means minimal set‑up and immediate usability in repetitive tasks; matching the pin diameter to component bore class is the main selection criterion to ensure meaningful inspection results. Contact Metav Werkzeuge in Emmerich for expert advice on using the M323.A82 gauge pin in production workflows — email info@metav-werkzeuge.com or call +49 2822 7131930 for proximity support and ordering from our European stock. Technical data Article number: M323.A82 GTIN: 4061905063626 Manufacturer: Metav IndustryLine Diameter: 10.82 mm Length: 50 mm Tolerance / accuracy: ±0.002 mm Weight: 0.1 kg Material: Special steel Version: Workshop execution (single piece) Delivery: Supplied in a protective case Category: Gauge pin FAQ Is the gauge pin suitable for routine go/no‑go checks on bores? The M323.A82 gauge pin from Metav IndustryLine is intended for go/no‑go and fit verification on compatible bores and assembly seats, offering a clear pass/fail criterion thanks to its defined diameter and tight tolerance. Can the pin be used in abrasive or high‑temperature environments? The test pin is made from special steel and is designed for general workshop use; prolonged exposure to abrasive media or elevated temperatures may affect longevity, so application conditions should be matched to the material properties. How should the gauge pin be stored to preserve accuracy? Store the pin in its supplied protective case after cleaning and dry storage; this preserves the 10.82 mm diameter and prevents knocks or corrosion that could compromise measurement reliability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.83mm Gauge Pin, Single, 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of tight tolerance, compact length and robust construction to streamline routine end‑dimension checks. The 10.83 mm diameter and ±0.002 mm accuracy ensure reliable repeatability in workshop inspection. Order the gauge pin directly via Metav Werkzeuge or consult our specialists if specification advice is required. Gauge pin M323.A83 — 10.83 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin M323.A83 is a workshop‑grade precision test pin designed for end‑dimension verification and component fit checks in production and inspection environments. Workshop‑grade precision test pin Diameter 10.83 mm for end‑dimension checks Length 50 mm for fixture compatibility Tolerance ±0.002 mm for fine inspection Consistent measurement performance that speeds inspection This precision test pin delivers repeatable measurement results through its tight manufacturing tolerance of ±0.002 mm, which reduces sorting and rework. Where small deviations matter, the narrow diameter of 10.83 mm and the compact 50 mm length allow straightforward insertion into bores, gauges and assembly jigs, enabling fast go/no‑go assessments and consistent process control. The dimensional certainty shortens inspection loops and supports efficient quality decisions on the shop floor. Robust construction for regular workshop use Manufactured from special steel, the pin is built to withstand frequent handling typical of workshop routines while maintaining its dimensional stability. The workshop‑grade execution means the component pairs well with standard fixtures and hardened gauge blocks, offering low maintenance and predictable service life. The moderate mass and compact format also simplify storage and quick retrieval from tool drawers or inspection kits. Practical integration into inspection workflows As a dedicated pin gauge for end‑dimension checking, this item suits batch inspection, first‑article testing and assembly verification tasks. The clear nominal size and traceable SKU make inventory management straightforward, and compatibility with common gauging equipment reduces integration time. When precision and a compact footprint are required, the gauge pin supports rapid, repeatable checks and a dependable baseline for quality documentation. For reliable workshop inspection at fine tolerances, source the M323.A83 gauge pin from Metav Werkzeuge — contact our product specialists for application guidance or procurement assistance. Technical Data Article number: M323.A83 GTIN: 4061905063633 Category: Messstifte Facts Diameter: 10.83 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Version: Workshop execution Intended use: End‑dimension checks FAQ What is the tolerance of this gauge pin? The M323.A83 gauge pin is manufactured to a tolerance of ±0.002 mm, suitable for fine inspection tasks. Which material is used for the pin? This test pin is made from special steel, chosen for dimensional stability under regular workshop use. For which inspection tasks is this pin suitable? The pin is intended for end‑dimension checks, component fit verification and quick go/no‑go measurements in production settings. How is the product identified for ordering? Order using the article number M323.A83 or the GTIN 4061905063633 to ensure correct delivery. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10.84mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of high reproducibility, compact handling and workshop‑grade construction for reliable end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or ask the consultants for tailored advice. Gauge pin M323.A84 — inspection pin, 10.84 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin M323.A84 is a single inspection pin designed for precise end‑measure verification in workshop and small‑parts inspection tasks Workshop version for robust everyday use Diameter 10.84 mm; length 50 mm Special steel for wear resistance Traceable accuracy ±0.002 mm Precision where small differences matter The M323.A84 inspection pin delivers consistent dimensional checks in compact assemblies: with a nominal diameter of 10.84 mm and a length of 50 mm, the pin is classified in the micro size range for fine mechanical work. The manufacturing variation of ±0.002 mm provides a dependable reference when checking bores, gauges or mating parts, reducing uncertainty during routine inspections. The compact geometry keeps handling simple while maintaining a stiff contact edge, which helps to avoid measurement artefacts caused by elastic deformation. Built for repeatable workshop use Constructed from special steel, this single‑piece gauge pin is geared towards repeatability under everyday workshop conditions. The material choice balances wear resistance with machinability, so the pin retains its functional contour across many insertion cycles. Supplied as a single unit, the part is suitable for ad‑hoc checks in production, for use within pin blocks and for integration in inspection fixtures; the robust workshop design ensures minimal maintenance and stable performance during repeated go/no‑go verifications. Practical handling and inspection benefits At a weight of 0.1 kg and a compact form factor, the pin is easy to position by hand or in small jigs, which speeds up batch sampling and final checks. Using an inspection pin of this size simplifies alignment and end‑measure validation on small shafts, bores and mating features, shortening inspection times and improving throughput. The combination of compact design and tight manufacturing tolerance supports higher first‑pass yield and lowers rework rates where accurate end‑dimension control is essential. Contact Metav Werkzeuge for ordering guidance and secure the Metav IndustryLine gauge pin M323.A84 for dependable end‑dimension verification at the workshop bench Technical Data Article number: M323.A84 GTIN: 4061905063640 Category: Messstifte Facts Diameter: 10.84 mm Length: 50 mm Manufacturing variation: ±0.002 mm Weight: 0.1 kg Special features Workshop version Material: special steel Supplied as single piece Suitable for end‑measure inspections FAQ What is the exact diameter and length of this inspection pin? The inspection pin has a diameter of 10.84 mm and a length of 50 mm as specified for the M323.A84 gauge pin. What tolerance can be expected from the part? Manufacturing variation is ±0.002 mm, which ensures reliable repeatability for micro‑scale end‑dimension checks. Which material is used for the pin? The pin is made from special steel, selected for durability and stable contact properties during repeated measurements. Can this pin be used in pin blocks or inspection fixtures? Yes, the single‑piece design and compact dimensions make the pin suitable for use in pin blocks and small inspection fixtures. Is the product supplied individually or in sets? The item is supplied as a single inspection pin under the article number M323.A84. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com