Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
18.47mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Combine ±0.002 mm dimensional accuracy with robust special steel construction and a workshop-ready protective case for dependable reference gauging in production. Order the gauge pin directly via Metav Werkzeuge or consult our technical advisers for application-specific guidance. M323.I47 gauge pin — single test pin, Ø 18.47 mm, 50 mm length (Metav IndustryLine) A M323.I47 gauge pin designed for precise reference measurements and fit verification in workshop and inspection environments. *Workshop-grade finish for daily industrial use *Diameter 18.47 mm with ±0.002 mm accuracy *Delivered in protective transport case Consistent high-precision for in-process checks The cylindrical reference element offers ±0.002 mm positional accuracy, making it suitable for fine tolerance checks during assembly and inspection. Manufactured from special steel, the pin resists wear and maintains geometric integrity over repeated contact cycles, which reduces the need for frequent replacement and supports consistent production throughput. The compact 50 mm length and moderate mass contribute to stable handling when placed into fixtures or bore gauges, helping to keep process variation low. Designed to simplify fit and mating assessments With a diameter of 18.47 mm, the pin serves as a reliable master for go/no-go checks, pin gauging and alignment tasks. Its smooth, ground finish minimises surface friction and provides a true running surface for assessing bore form and clearance. The workshop execution combines practical robustness with dimensional fidelity, allowing quick verification of mating parts and tool set-ups without complex measuring equipment—ideal where rapid, repeatable assessments increase operational efficiency. Practical handling, storage and traceability Delivered as a single unit in a protective case for transport, the pin is ready for storage and safe transfer between measuring stations. The compact packaging preserves the calibrated condition of the element and reduces risk of nicks or contamination. At 0.15 kg gross weight and 50 mm length, the instrument integrates easily into inspection trays and modular tooling. Supplied as a standalone reference pin, it supports straightforward integration into existing quality routines and traceable part handling. Contact Metav Werkzeuge today to specify the M323.I47 gauge pin for production or inspection use and request tailored advice from our metrology specialists Technical data SKU: M323.I47 GTIN: 4061905072789 Weight: 0.15 kg Length: 50 mm Diameter: 18.47 mm Material: Special steel Accuracy: ±0.002 mm Workshop execution Delivered in transport case Core measurements Diameter: 18.47 mm Length: 50 mm Weight: 0.15 kg Accuracy: ±0.002 mm Special features Single test pin Ground, wear-resistant surface Protective transport case included Category: Gauge pins FAQ What inspection tasks is this gauge pin suitable for? The M323.I47 gauge pin from Metav IndustryLine is intended for fit checks, bore verification and reference measurement tasks where a 18.47 mm master and ±0.002 mm accuracy are required. Is the pin protected for transport and storage? Yes, the gauge pin is supplied in a protective transport case to keep the ground surface free from damage and contamination during handling. Which material is used for the test pin? The pin is manufactured from special steel, chosen for wear resistance and dimensional stability in workshop conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.48mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of a compact, workshop‑ready gauge pin that combines a defined diameter of 18.48 mm, a working length of 50 mm and a high manufacturing tolerance of ±0.002 mm to secure reproducible end‑measure checks; order via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.I48 — single test pin, Ø 18.48 mm, length 50 mm (Metav IndustryLine) A gauge pin M323.I48 engineered for precise end‑measure inspection and plug‑gauge tasks in workshop and production metrology. Workshop version for routine inspection Diameter 18.48 mm, length 50 mm Tolerance ±0.002 mm for fine checks Made from special steel for long service Reliable inspection that fits everyday workshop routines This single test pin provides a compact reference for go/no‑go checks and dimensional verification in assembly, fixture set‑up and quality control. With a nominal diameter of 18.48 mm and a grip length of 50 mm, the component delivers a well‑balanced contact area that reduces flex and stabilises readings during manual handling. The declared ±0.002 mm tolerance corresponds to approximately 2 micrometres, ensuring precision that is suitable for fine mechanical parts and tight assembly tolerances without the complexity of a full gauging system. Use of a defined test pin avoids cumulative measurement errors and simplifies routine acceptance sampling. Built to withstand workshop use while maintaining reference geometry Constructed from special steel, the pin is intended as a resilient reference element for repeated checks. The workshop version designation indicates a focus on robust finishing and consistent geometry under normal shopfloor conditions, which reduces the need for frequent replacement. The relatively low mass (0.15 kg) and compact profile aid in safe handling and rapid exchange in pin blocks or fixtures. Where surface wear is a concern, the choice of steel provides dimensional stability over many cycles, preserving the gauge integrity required for traceable inspection processes. Streamlined handling and traceability for quality workflows As a single‑piece test pin, the M323.I48 integrates easily into manual and semi‑automated inspection routines, serving as a handheld reference, a mating plug for sockets, or a master for bench verification. Marking with SKU M323.I48 and GTIN supports inventory control and clear traceability in production documentation. The simple geometry reduces manipulation time during checks, which improves throughput and lowers the risk of measurement variation caused by handling. For customers seeking reproducible short‑range checks and minimal setup time, this gauge pin is an efficient choice. Contact Metav Werkzeuge for tailored advice and to order the Metav IndustryLine gauge pin M323.I48 for reliable end‑measure inspection; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.I48 GTIN: 4061905072796 Brand: Metav IndustryLine Facts Diameter: 18.48 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Single gauge pin design Workshop version (Werkstatt‑Ausführung) Category: Gauge pins (Messstifte) FAQ What is the intended use of this gauge pin? The gauge pin M323.I48 is intended for end‑measure checks, plug‑gauge verification and quick dimensional checks in workshop and production metrology. What are the exact dimensions and identifiers? Diameter 18.48 mm, length 50 mm, tolerance ±0.002 mm; SKU M323.I48, GTIN 4061905072796. How precise is a tolerance of ±0.002 mm in practical terms? A tolerance of ±0.002 mm equals roughly 2 micrometres, which is appropriate for high‑precision inspection tasks where small deviations must be detected reliably. What material is used and what does that mean for durability? The pin is manufactured from special steel, selected to provide wear resistance and dimensional stability under typical workshop use. Is this model suitable for routine workshop inspection? Yes — the Werkstatt‑Ausführung (workshop version) of this gauge pin is designed for everyday measurement tasks and frequent handling. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.49mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of high repeatability (±0.002 mm), 18.49 mm diameter and a robust special steel construction to standardise inspection and fixture checks in the workshop. Order or request application advice directly via Metav Werkzeuge for fast availability and technical guidance. Inspection pin M323.I49 — gauge pin with 18.49 mm diameter and 50 mm length (Metav IndustryLine) The inspection pin M323.I49 is a single gauge pin designed for precise end‑measurement, fixture testing and go/no‑go checks in workshop and inspection environments. High-precision tolerance ±0.002 mm Diameter 18.49 mm, length 50 mm Hardened special steel construction Workshop-grade execution Precision that reduces rework and speeds inspection A compact, single-piece gauge pin delivers a measurable advantage in routine quality checks. With a verified tolerance of ±0.002 mm, the pin provides a quantifiable basis for acceptance testing and minimises ambiguous fit results that lead to rework. The given 18.49 mm nominal diameter and 50 mm length are matched to common end‑measurement tasks, enabling straightforward interchange with fixture seats and inspection jigs. In practice, the tight tolerance shortens decision cycles during incoming inspection and assembly verification, contributing directly to throughput improvements on the shop floor. Durable construction for repeatable measurements Made from special steel, the pin resists wear and preserves critical diameters over many cycles, which supports long‑term repeatability of measurements. A stable material and workshop execution reduce the risk of surface damage when the pin is used in alignment, location or gauging operations. The modest mass and balanced geometry help maintain alignment in fixture checks, so measurements remain consistent even under frequent handling. Where process stability and traceable measurement steps are required, this specification supports reliable comparative checks across shifts and operators. Practical handling and calibration context The M323.I49 format suits direct insertion into bores, alignment sleeves and reference fixtures; its single‑piece design keeps handling simple and reduces setup time versus multi‑component gauges. The pin’s specification is expressed in clear numerical terms (18.49 mm, 50 mm, ±0.002 mm) so incorporation into inspection plans and control charts is immediate. If formal calibration is required, the dimensional values given here provide an explicit reference for in‑house or laboratory calibration records and for procurement specifications in quality documentation. Confidence through responsible sourcing From a procurement perspective, relying on a recognised line reduces supply risk and supports consistent quality control routines. Metav IndustryLine items are selected to suit industrial metrology needs and to make accurate inspection tools accessible to workshops and specialist suppliers alike. The choice of a workshop‑grade inspection pin helps maintain inspection standards without unnecessary complexity, aligning well with a pragmatic quality management approach. Contact Metav Werkzeuge for application advice and availability of the Metav IndustryLine inspection pin — info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: M323.I49 GTIN: 4061905449352 Brand: Metav IndustryLine Core specifications Diameter: 18.49 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Execution: workshop-grade Category: gauge pin / inspection pin Application: end-measurement and fixture checks FAQ What accuracy can be expected from this gauge pin? The inspection pin delivers a tolerance of ±0.002 mm, which makes it suitable for fine dimensional checks and repeatable fixture verification. Is the pin suitable for use in alignment and locating applications? Yes, the single‑piece gauge pin is designed for insertion into bores and sleeves for alignment, locating and go/no‑go gauging tasks. What material is used for the pin and how does that affect wear? The pin is made from special steel, chosen to provide good surface hardness and wear resistance for frequent workshop use. Can this pin be included in formal inspection records? The dimensional data (18.49 mm / 50 mm / ±0.002 mm) enables straightforward inclusion in inspection plans and calibration records for traceability. Is the Metav IndustryLine inspection pin compatible with standard fixture sizes? The nominal diameter and length are matched to common fixture and sleeve dimensions; refer to the recorded values for final compatibility checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.4mm Gauge Pin Length 50mm, Workshop Version, Special Steel, ±0.002 Accuracy, Supplied In Case - Metav IndustryLine
Take advantage of precision tolerance, robust workshop design and convenient transport protection to ensure fast, repeatable inspection and fitting checks. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.I40 — single test pin, Ø 18.4 mm, 50 mm length (Metav IndustryLine) The Gauge pin M323.I40 is a precision ground test pin designed for end‑measure verification and fit inspection in workshop and production environments, offering a compact length for reliable handling during assembly and quality control tasks. Workshop execution for robust daily use Precision tolerance ±0.002 mm Diameter Ø 18.40 mm, length 50 mm Supplied in protective transport case Repeatable accuracy for critical fits The pin delivers a tolerance of ±0.002 mm, which supports repeatable verification of bores and mating parts where small deviations affect assembly performance. Manufactured from special steel and ground to size, the component provides dimensional stability that reduces uncertainty in pass/fail checks. This level of precision is particularly relevant for end‑measure checks and fits where a fine clearance or interference must be confirmed reliably. Designed for daily workshop handling A workshop execution implies resilience under frequent use and straightforward handling on the shop floor. With a compact 50 mm length and a clear Ø 18.4 mm diameter, the test pin is easy to position in bore checks and jig inspections without excessive overhang. The supplied protective transport case preserves surface integrity during storage and transit, maintaining the pin’s measuring quality over time and lowering the risk of accidental damage. Practical integration into inspection routines As a single ground test pin, the product is suitable for rapid pass/fail checks, gauging tasks and occasional spot inspections as part of standard quality routines. The simple geometry supports quick comparisons against reference gauges and can be incorporated into fixture checks where a defined end measure is required. Using such a precisely made pin streamlines inspection throughput while maintaining measurable confidence in assembly tolerances. Traceability and identification for procurement Clear identification is provided for inventory and traceability purposes: the item is listed under M323.I40 and carries GTIN 4061905072710. The modest mass facilitates handling on the shop floor without adding significant weight to kits or tool drawers. The combination of specified tolerance, material and workshop design supports consistent results in serial inspection tasks and reduces the need for repeated rework. Contact Metav Werkzeuge for a specification sheet or to request a tailored offer — Metav Werkzeuge provides regional stocking and technical guidance from Emmerich for reliable delivery and application support Technical data Article number: M323.I40 GTIN: 4061905072710 Brand: Metav IndustryLine Material: Special steel Type: Single gauge pin Facts Diameter: 18.4 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Special features Workshop execution Precision ground surface Supplied in protective transport case Compact geometry for fixture and bore checks FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.I40 is manufactured to a tolerance of ±0.002 mm, suitable for fine inspection and fit verification in workshop environments. Is the pin supplied ready for transport and storage? Yes, the test pin is supplied in a protective transport case, which preserves the ground surface and prevents handling damage during storage or shipment. What material is used for the pin? The pin is made from special steel, selected for dimensional stability and wear resistance in routine inspection tasks. Which applications is this pin best suited to? The single gauge pin from Metav IndustryLine is intended for end‑measure checks, bore gauging and quick fit inspections where a compact, precise reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.5 mm Gauge Pin, Single, 50 mm Length, Workshop Version - Metav IndustryLine
Take advantage of a robust measurement reference that combines special steel construction, ±0.002 mm accuracy, and compact handling for reliable end-size inspection — ordered directly via Metav Werkzeuge or discussed with our consultants for speedy integration into workshop processes. Gauge pin, single — 18.5 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin is a single precision test pin designed for end‑size checks, fixture set‑up and quick pass/fail verifications in workshop and inspection environments. Precision ±0.002 mm tolerance Special steel for wear resistance 50 mm overall length, 18.5 mm diameter Workshop version delivered in protective case High precision that reduces rework and speeds checks The core advantage of this precision test pin is its tight tolerance of ±0.002 mm, which provides a dependable reference for end‑size inspection and fixture alignment. Tolerance here refers to the maximum deviation expected during production; a low value means less uncertainty when verifying component fit. In practice, using a high‑accuracy pin for go/no‑go checks shortens decision cycles on the shop floor and reduces scrap rates, since measurements are directly comparable and repeatable. The measurable benefit is a more consistent production flow and fewer interruptions for corrective machining. Durable construction for frequent workshop use Made from special steel, the test pin is formulated to withstand repeated insertion and contact without rapid wear, keeping reference dimensions stable over time. The workshop version specification indicates a design intended for everyday handling rather than delicate laboratory conditions: surfaces are finished for low friction, edges are chamfered for easy entry and the component is ruggedised against knocks. Delivered in a protective case, the pin arrives ready for storage and transport, reducing the risk of damage during shift changes or mobile inspection rounds and extending service life. Compact dimensions for versatile fixture and gauge use With an 18.5 mm diameter and 50 mm length, the pin combines a compact profile with enough engagement length for reliable seating in jigs, bushings or bore gauges. The short overall length improves stiffness during insertion, which lowers measurement variance caused by bending or misalignment. Its modest weight and size make it convenient to handle as part of a gauge set or to include in a portable inspection kit, enabling fast checks on assembly lines, test benches or in-situ inspections without complex fixturing. Practical applications and operational benefits This gauge pin is suitable for end‑size measurement, quick functional testing of mating parts and setting reference distances in fixture construction. Marking the pin as a fixed‑dimension reference helps standardise inspection routines, which supports traceable quality control processes and shorter cycle times in production. Where repeatability matters, the combination of special steel and tight tolerance makes the pin a cost‑effective way to raise measurement confidence and lower downstream rework rates. Contact Metav Werkzeuge for expert advice on integrating this Metav IndustryLine gauge pin into production or to request tailored recommendations from our Emmerich team Technical data Article number: M323.I50 GTIN: 4061905449369 Manufacturer: Metav IndustryLine Material: Special steel Length: 50 mm Diameter: 18.5 mm Facts Length (overall): 50 mm Diameter: 18.5 mm Weight: 0.15 kg Tolerance: ±0.002 mm Eclass: 21170231 Special features Workshop version Delivered in protective case Precision grade for end‑size inspection Category: Gauge pin FAQ What tolerance can be expected from this gauge pin? The gauge pin is specified with a tolerance of ±0.002 mm, ensuring tight dimensional control appropriate for precision end‑size checks. Which material is used for the pin and why does it matter? The pin is made from special steel, chosen for its wear resistance and dimensional stability under frequent contact, which preserves the reference dimension over many inspection cycles. Is this pin suitable for use in fixtures and jigs? Yes, the gauge pin is intended for fixture set‑up and jigs; its 50 mm length and 18.5 mm diameter provide a stiff, reliable reference for mating parts. How is the product delivered and protected in transit? The workshop version is supplied in a protective case to prevent surface damage during storage and transport, ensuring the reference dimension remains intact. Can this pin be used for rapid pass/fail checks on the shop floor? Yes, the combination of compact dimensions and ±0.002 mm accuracy makes the pin well suited for quick functional checks and go/no‑go verifications. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.51mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
The compact combination of ±0.002 mm repeatability, Ø 18.51 mm diameter and a 50 mm length makes this single gauge pin a reliable choice for precise end‑measure checks and fit verification; order the item directly from Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single, Ø 18.51 mm — 50 mm length (Metav IndustryLine) The gauge pin, single, Ø 18.51 mm is a workshop‑grade datum pin designed for repeatable end‑measure inspections and assembly checks in production and maintenance environments. Workshop-grade gauge pin Diameter Ø 18.51 mm, length 50 mm High repeatability: tolerance ±0.002 mm Supplied in transport case Repeatable inspection results through tight mechanical tolerance A tolerance of ±0.002 mm ensures consistently repeatable readings when used as a datum for go/no‑go assessments, fit verifications or end‑of‑line checks. The tight clearance control reduces downstream rework and improves first‑pass yield, translating directly into lower production interruptions. By relying on a precision pin with a defined diameter and minimal run‑out, inspection routines become faster and more dependable, helping to maintain process stability in small‑batch and serial production alike. Durable workshop construction for everyday handling Manufactured from special steel, the component is engineered for workshop conditions where robustness and resistance to handling are important. The workshop version design balances dimensional stability with practical toughness; the compact 50 mm length and solid cross‑section reduce bending risk during use. Delivered in a protective transport case, the item is protected during storage and movement, which preserves its dimensional integrity and keeps maintenance effort to a minimum. Integrates smoothly into measurement and assembly workflows As a simple, single datum element, the pin is suitable for quick insertion into fixtures, bore checks and assembly jigs: it acts as a repeatable reference for alignment and gauging tasks. The straightforward geometry and defined diameter support rapid use in quality control stations and hand‑held verification procedures. Where accurate end‑measure confirmation is required, the gauge pin provides a fast, low‑complexity solution that complements digital and mechanical inspection tools. Practical handling and traceable identity for shopfloor use With a compact mass of 0.15 kg and clearly specified dimensions, the product is easy to transport between inspection benches and fits into standard storage solutions. The precise diameter specification supports consistent interchangeability across fixtures and reduces measurement uncertainty during assembly operations. Combined with Metav’s quality filter and inventory management, the component forms part of a dependable supply chain for workshops seeking repeatable precision without excessive complexity. For reliable workshop measurement, order the Metav IndustryLine gauge pin directly from Metav Werkzeuge or contact our application experts at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice. Technical data Article number: M323.I51 GTIN: 4061905449376 Label: Gauge pin, single, Ø 18.51 mm, length 50 mm Core specifications Diameter: Ø 18.51 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Workshop version Material: special steel Supplied in protective transport case Suitable for end‑measure and fit verification FAQ What applications suit this gauge pin best? The gauge pin is ideal for end‑measure checks, fit verification and fixture alignment in workshop and production settings; the Metav IndustryLine gauge pin (M323.I51) is designed for these repetitive inspection tasks. Is the diameter tolerance sufficient for precision assemblies? Yes, the ±0.002 mm tolerance of the gauge pin supports high repeatability and is suitable for tight‑fit assemblies and quality control points where minimal variation is required. How is the pin delivered and protected in transit? The item is supplied in a protective transport case to reduce handling damage during shipment and storage. Can this pin be used alongside digital gauges and fixtures? The cylindrical datum form and defined diameter make the pin compatible with mechanical fixtures and digital inspection setups, supporting seamless integration into existing workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.53mm Gauge Pin, Workshop Version, 50mm Length, ±0.002 Accuracy - Metav IndustryLine
Take advantage of the workshop‑grade combination of high precision (±0.002 mm), special steel construction and compact handling to shorten inspection cycles and secure repeatable end‑measure results. Order the gauge pin directly via Metav Werkzeuge or consult the Metav technical team for application advice. Metav IndustryLine Gauge Pin M323.I53 — Ø 18.53 mm, 50 mm length The M323.I53 gauge pin is a single, workshop‑grade test pin designed for end‑measure checks and go/no‑go verification in production and inspection areas. Precision tolerance ±0.002 mm Diameter Ø 18.53 mm 50 mm length, workshop grade Supplied in protective case Reliable measurement performance for routine inspection The compact test pin delivers consistent, repeatable measurements thanks to its tight tolerance of ±0.002 mm, which places it in the high‑precision range for workshop gauges. Built from special steel, the pin resists wear during frequent insertion and withdrawal cycles, reducing the need for premature replacement and keeping inspection throughput high. As a single‑piece plug gauge, it simplifies end‑measure checks and supports rapid go/no‑go decisions on production lines, shortening cycle time while maintaining traceable accuracy. Robust design suited to workshop environments Engineered as a workshop grade component, the pin combines a nominal Ø 18.53 mm diameter with a 50 mm active length to suit a broad range of bore and feature checks. The construction emphasises stable handling and minimal deformation under normal use, and the supplied protective case ensures safe transport and storage between shifts. The moderate weight and compact footprint make the pin easy to integrate into handheld inspection routines or bench setups without adding bulk to toolkits. Practical applications and process benefits This single test pin is ideal for final dimension verification, end‑measure controls and quick acceptance checks during series production. By standardising on a precision reference such as this, internal inspection routines gain clarity: fewer ambiguous results, faster decisions and a clear pass/fail criterion. For small‑batch quality assurance or repetitive sample checks, the pin supports reproducible outcomes and reduces scrap caused by measurement uncertainty. For workshop‑grade precision from Metav IndustryLine, contact Metav Werkzeuge for tailored advice on integrating the M323.I53 gauge pin into inspection workflows and spare‑part planning. Technical data SKU: M323.I53 GTIN: 4061905449390 Category: Gauge pins Numbers / Core technical data Diameter: 18.53 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features / Versions Workshop execution Material: special steel Single test pin (individual item) Supplied in protective transport case ECLASS: 21170231 FAQ What level of accuracy does this gauge pin provide? The M323.I53 gauge pin from Metav IndustryLine offers a manufacturing tolerance of ±0.002 mm, making it suitable for high‑precision end‑measure and plug checks in workshop environments. Which applications are typical for this test pin? The Metav IndustryLine M323.I53 is intended for end‑measure verification, go/no‑go testing and routine bore checks in production and inspection processes. Is the pin ready for workshop use on delivery? The M323.I53 is supplied as a single, ready‑to‑use test pin in a protective case, designed to be incorporated immediately into inspection routines. What material is the gauge pin made from and why does it matter? Manufactured from special steel, the M323.I53 combines wear resistance with dimensional stability, which helps preserve precision over repeated use and extends service life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.54mm Test Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Compact Ø 18.54 mm gauge pin with ±0.002 mm tolerance and 50 mm length provides workshop-ready precision and repeatable end-dimension checks; order this Metav IndustryLine component directly via Metav Werkzeuge or consult our advisors if required. Gauge pin, single, 18.54 mm diameter, 50 mm length (Metav IndustryLine) Gauge pin, single, 18.54 mm diameter, 50 mm length is a workshop‑grade cylindrical reference pin for end‑dimension verification and fixture set‑up in general metalworking and precision inspection tasks. Workshop-grade construction for durability Diameter 18.54 mm for end‑dimension checks Length 50 mm, compact and easy to handle Dimensional tolerance ±0.002 mm for precision Consistent precision for end‑dimension verification The cylindrical reference pin is engineered for repeatability in end‑dimension measurements. With a nominal diameter of Ø 18.54 mm and a verified dimensional tolerance of ±0.002 mm, the component supports fine control in inspection routines and gauge stacks. Constructed from special steel, the pin resists wear in routine shop use while maintaining stable geometry; this ensures reproducible readings when verifying shafts, bores and mating parts. The compact format minimises thermal mass, so short‑term temperature shifts have reduced effect compared with larger artefacts. Robust workshop design and practical handling Designed as a workshop-grade tool, the pin combines hardened material choice with a manageable 50 mm length to balance stiffness and accessibility. The shortened profile reduces bending under manual handling and simplifies insertion into tight jigs and fixture pockets. Supplied as a single piece and protected for transport in a compact transport box, the item is easy to store and move between inspection benches. The modest mass contributes to safe handling in busy production environments while preserving the mechanical integrity required for repeated use. Where it fits in the measurement workflow This compact cylindrical gauge is particularly useful for final-size checks, fixture set‑up and quick go/no‑go validation of end dimensions in component production. The pin supports a rational quality workflow: rapid verification reduces rework and supports consistent assembly tolerances, while the reliable geometric reference shortens inspection cycles. In small‑batch and repair work, the combination of precision and portability keeps inspection close to the process, increasing throughput without sacrificing measurement quality. For workshop-ready precision from Metav IndustryLine, request details or procure the gauge pin via Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific tasks. Technical data Article number: M323.I54 GTIN: 4061905449406 Facts Diameter: 18.54 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop version Supplied as single piece Delivered in transport box FAQ What applications is this gauge pin suited for? The gauge pin (Metav IndustryLine, SKU M323.I54) is intended for end‑dimension verification, fixture set‑up and quick dimensional checks in metalworking and inspection workflows. Is the material suitable for regular shop use? Yes; the pin is made from special steel that gives wear resistance appropriate for routine measurement tasks and frequent handling. Can this pin be used for bore alignment or only external checks? The pin is optimised for end‑dimension and alignment tasks; it functions as a reference for both external and insertion checks depending on the jig or bore being measured. Does the tool include protective packaging for transport? The gauge pin is supplied as a single piece and delivered in a compact transport box to protect the reference surface during storage and transit. How precise is the diameter compared with typical workshop standards? With a tolerance of ±0.002 mm, the pin offers higher precision than standard workshop artefacts and is suitable where tight reproducibility is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.55mm Gauge Pin, Single 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop-ready durability, ±0.002 mm accuracy and compact handling for reliable end-dimension control; order the pin via Metav Werkzeuge or consult our team for application advice. Gauge pin, single — Ø 18.55 mm, 50 mm length (Metav IndustryLine) A single gauge pin, the 18.55 mm Ø test pin, designed for precision end-dimension checks and workshop use Workshop version for robust daily use Diameter 18.55 mm with ±0.002 mm precision 50 mm solid test pin in special steel Supplied in transport case for secure storage Precision where measurement decisions become certain The gauge pin delivers a measured tolerance of ±0.002 mm, enabling repeatable pass/fail assessments on tight bores and end dimensions. Such accuracy reduces ambiguous results during incoming inspection and shortens corrective loops on the shop floor. Built for inspection tasks that demand verifiable limits, this pin supports traceable measurement workflows and makes dimension comparisons straightforward for production control or set-up checks. Built for the workshop — durable, compact and ready Manufactured in special steel and finished for the workshop version, the pin’s 50 mm length and compact mass make it easy to handle in jigs and fixtures while resisting the wear of daily use. The solid construction ensures stability when seated in bore checks and minimises deformation under light contact. Delivery in a transport case protects the surface and geometry during storage and movement, preserving the reference condition between uses. Practical uses across inspection and set-up tasks This test pin is suitable for precise end-dimension verification, go/no-go gauging and alignment aids in fixture manufacture. Its geometry is ideal for checking bore sizes, calibrating gauge blocks and establishing reference positions in assembly operations. The compact design helps technicians perform quick spot checks on production runs, supporting efficient quality control without elaborate measuring stations. Reliable supply and sensible precision from a measured partner Sourced from the Metav IndustryLine range, the item benefits from a distribution and quality filter geared to workshop realities: steady availability, clear product specification and a focus on practical metrology. Metav’s breadth of products and experience streamlines procurement and reduces the number of suppliers required for reliable inspection equipment, supporting consistent production throughput and traceable quality practices. For workshop-ready accuracy from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for ordering and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.I55 GTIN: 4061905070402 Description: single gauge pin Ø 18.55 mm, length 50 mm Facts Diameter: 18.55 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop version Supplied in transport case Intended for end-dimension and bore checks FAQ What tolerance is specified for this gauge pin? The gauge pin M323.I55 from Metav IndustryLine is specified with a tolerance of ±0.002 mm. Is an ISO 17025 calibration certificate included? The product data does not list an ISO 17025 calibration certificate; no ISO 17025 certificate is stated as included in standard delivery. Which measurement tasks is the pin intended for? The pin is intended for end-dimension checks, bore verification and fixture alignment where a compact precision reference is required. What material is the pin made from and how durable is it? Made from special steel and supplied in a workshop version finish, the pin resists everyday wear and is suitable for repeated inspection routines. Is the pin delivered with protection for transport and storage? Yes, the item is supplied in a transport case to protect the measuring surface and geometry during storage and movement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.56mm Gauge Pin 50mm Length Workshop Version Special Steel, Calibrated Case Included - Metav IndustryLine
Take advantage of workshop-ready construction together with tight dimensional control to keep end-measurement tasks efficient and reproducible; the combination of a 18.56 mm diameter and a ±0.002 mm tolerance ensures high repeatability in alignment and gauging operations. Order the gauge pin directly via Metav Werkzeuge or consult our technical advisers for specification guidance. Gauge pin M323.I56 — workshop test pin, 18.56 mm Ø, 50 mm length A gauge pin M323.I56 designed for precise end‑measurement and alignment tasks in workshop and inspection environments Workshop-grade design Diameter 18.56 mm precision Length 50 mm robust shaft Tolerance ±0.002 mm accuracy Precision that supports faster decisions on the shop floor The M323.I56 is manufactured for repeatable end measurements and fits applications where dimensional certainty shortens rework cycles. With a nominal 18.56 mm diameter and a specified ±0.002 mm tolerance, the pin provides a measurable basis for pass/fail decisions and fixture alignment. The geometry minimises runout and contact ambiguity; when used as a reference pin in comparative gauging or end‑measure assemblies, the stable diameter reduces measurement scatter and supports quicker quality verdicts. Robust workshop design for everyday handling Built in a workshop-grade configuration, this test pin offers a compact 50 mm shaft that balances reach with handling comfort. The component is produced from special steel, delivering surface hardness and wear resistance appropriate for repeated seating in bores and gauges. At approximately 0.15 kg, the pin is substantial enough to sit stably in jigs yet small enough for easy manual placement. The construction reflects a focus on practical longevity rather than delicate laboratory use, so maintenance intervals and replacement cycles are predictable. Traceability, identification and fit for industrial workflows Identification marks and the SKU simplify inventory and procurement: Article number M323.I56 is traceable via GTIN 4061905070419 for efficient logistic handling. Supplied as a single test pin, the item is suitable for integration into established inspection routines and fixture sets that rely on precise reference diameters. Backed by a supplier that emphasises accessible precision, this component supports standardised processes and helps maintain consistent quality across production batches. For workshop-ready precision and reliable supply, request the M323.I56 gauge pin from Metav Werkzeuge or contact our consultants for tailored technical advice Technical Data Article number: M323.I56 GTIN: 4061905070419 Description: Test pin, single, 18.56 mm diameter, 50 mm length Manufacturer: Metav IndustryLine Facts Diameter: 18.56 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop execution Single item supply SKU: M323.I56 FAQ What materials is the pin made from? The M323.I56 gauge pin is manufactured from special steel, selected for wear resistance and stability in workshop use. How precise is the diameter specification? The pin carries a diameter specification of 18.56 mm with a dimensional tolerance of ±0.002 mm, suitable for tight gauging and alignment tasks. Is the pin supplied as a single item or in sets? This product is supplied as a single test pin (single item), identified as M323.I56 for straightforward inventory control. Which applications are typical for this test pin? The gauge pin is intended for end‑measurement, alignment and comparative gauging duties in workshop and inspection workflows where a compact, robust reference diameter is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.57mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Benefit from the combination of a precise 18.57 mm diameter, a tight ±0.002 mm tolerance and a robust 50 mm length for reproducible end-dimension checks; order the test pin directly via Metav Werkzeuge or consult our advisors for application matching. M323.I57 Test pin (18.57 mm diameter, 50 mm length) — Metav IndustryLine M323.I57 is a single test pin designed for precise end-measurement and gauge applications in workshop environments Precision diameter 18.57 mm Tight tolerance ±0.002 mm Robust 50 mm length for workshop use Made from special steel for durability Reliable reference for end-dimension checks The M323.I57 functions as a dependable reference gauge pin for end-dimension verification and assembly set-up. With a nominal diameter of 18.57 mm and an accuracy of ±0.002 mm, the component offers measurable, repeatable results that reduce rework and speed up inspection cycles. The single-piece design simplifies insertion and withdrawal from bores or fixtures, while the clearly defined dimensions support traceable verification routines in quality control. Built for daily workshop use and handling Presented in a workshop-grade finish, this test pin combines practical robustness with the required measuring precision. The 50 mm active length balances accessibility and stiffness, making the item suitable for routine gauge checks and fixture set-ups. Supplied as a single unit under SKU M323.I57 and GTIN 4061905071270, the pin is compact to store and straightforward to integrate into existing inspection kits. The moderate mass assists stable handling without excessive inertia during manual operations. Versatile application in measuring and assembly workflows As a dedicated gauge pin, the article supports end-dimension checks, go/no‑go verification and the calibration of inspection tooling. The tight dimensional specification makes it appropriate for use in precision workshops, small-batch production and measurement benches where consistent end measurements are required. The component’s workshop specification ensures durability in repetitive use scenarios and contributes to reliable process control when used alongside other calibrated inspection standards. For a tailored recommendation or to procure the Metav IndustryLine M323.I57 test pin for workshop metrology, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for specialist advice and supply options Technical data SKU: M323.I57 GTIN: 4061905071270 Category: Messstifte Facts Diameter: 18.57 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Special features Workshop execution Material: Special steel Single test pin Supplied in a protective case FAQ What is the nominal diameter and tolerance of this test pin? The M323.I57 test pin has a nominal diameter of 18.57 mm with a stated tolerance of ±0.002 mm. Which material is used for the test pin? The test pin is manufactured from special steel and produced in a workshop-grade finish suitable for regular use. Is the test pin supplied with a calibration certificate? The product data does not specify a calibration certificate; the item is supplied as a single workshop test pin (M323.I57). For which applications is this gauge pin intended? The gauge pin is intended for end-dimension checks, go/no‑go verification, fixture set-up and general workshop metrology tasks. Is the test pin delivered in protective packaging? The M323.I57 is supplied in a protective case to facilitate safe transport and handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.58mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Benefit from a combination of ±0.002 mm measurement accuracy, a precise Ø 18.58 mm diameter and a robust 50 mm length for reproducible bore checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single, Ø 18.58 mm — 50 mm length (Metav IndustryLine) The Gauge pin Ø 18.58 mm provides a compact, high-precision inspection element for checking bore diameters and reference fits in production and quality control. High-precision tolerance ±0.002 mm Workshop-grade special steel construction Exact diameter Ø18.58 mm for fit checks 50 mm length for stable handling Consistent measurement for reproducible tolerances A strict focus on repeatability defines this inspection element: the ±0.002 mm tolerance ensures that dimensional checks produce reliable pass/fail decisions and reduce downstream rework. Used as a reference for assembly and quality control, the gauge pin delivers a stable datum for go/no-go assessments. The compact geometry minimises bending moments during insertion, so measured dimensions remain representative of the component rather than the operator’s handling. Robust workshop design for continuous use Constructed from special steel and offered in a workshop version, the element resists everyday wear while keeping handling straightforward. The 50 mm length provides sufficient gripping area for manual checks without compromising stiffness, while the exact Ø 18.58 mm diameter suits tight-fit verifications. The overall design supports frequent inspection cycles on the shop floor and integrates easily into bench setups or inspection fixtures, extending tool life and improving process reliability. Practical application and handling guidance For typical applications such as bore verification, reference-fit testing and final inspection, the pin functions as a reliable go/no-go reference. Clean contact surfaces before use and store the element in a corrosion‑protective environment to maintain dimensional integrity. Routine visual inspection for nicks and burrs preserves measurement quality; damaged items should be withdrawn from inspection work to avoid false readings. The robust construction and defined tolerance contribute to efficient quality processes and clearer production decisions. Choose the Metav IndustryLine gauge pin for dependable inspection results and contact Metav Werkzeuge for tailored supply and expert guidance on integrating this element into existing measurement routines Technical data Article number: M323.I58 GTIN: 4061905071287 Label: Gauge pin, single, 18.58 mm, length 50 mm Category: Messstifte Facts Diameter: 18.58 mm Length: 50 mm Weight: 0.15 kg Accuracy: ±0.002 mm Special features Material: Special steel Workshop version eClass: 21170231 Story trigger: endmasse FAQ What diameter and tolerance does this gauge pin have? The gauge pin M323.I58 has a diameter of 18.58 mm and an accuracy of ±0.002 mm. What material is used for the M323.I58 gauge pin? The M323.I58 gauge pin is manufactured from special steel in a workshop-grade execution. For which applications is the M323.I58 intended? The M323.I58 gauge pin is suited to bore verification, reference-fit checks and final inspection tasks in production and quality control. Is the M323.I58 supplied calibrated? The product data does not specify that the M323.I58 gauge pin is supplied calibrated. How should the M323.I58 be maintained to retain accuracy? Keep the M323.I58 clean and free of debris, protect it from corrosion and inspect for surface damage before use to preserve measurement reliability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.59mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of high repeatability, compact dimensions and workshop‑grade material for dependable end‑measure checks; the precise 18.59 mm diameter and ±0.002 mm tolerance reduce rework and support consistent assembly quality. Order the part directly via Metav Werkzeuge or consult our advisors for application support. Gauge pin M323.I59 — single inspection pin, 18.59 mm dia, 50 mm length (Metav IndustryLine) The gauge pin M323.I59 is a precision inspection pin intended for end‑measure and fit testing in production and quality control, offering consistent reference dimensions for assembly verification and go/no‑go checks High‑precision tolerance ±0.002 mm Diameter 18.59 mm, length 50 mm Material: special steel for industrial use Workshop version for robust handling Consistent metrology for repeatable checks The M323.I59 is designed for reliable dimensional checks in manufacturing environments where repeatability matters. With a nominal diameter of 18.59 mm and a declared tolerance of ±0.002 mm, the pin provides a stable reference for socket and bore inspections, reducing uncertainty during end‑of‑line verification. The compact 50 mm length gives good handling while limiting deflection, so measurements and fit assessments remain reproducible. This factual specification helps planners and quality engineers select the correct reference gauge for in‑process or final inspections. Built for workshop conditions and frequent use As a workshop version, the inspection pin is intended for regular handling and robust operation on the shop floor. Manufactured from special steel, the component balances wear resistance with manufacturability to withstand repeated insertion and withdrawal cycles. The straightforward geometry simplifies cleaning and visual inspection, supporting fast cycle times in assembly checks. Engineers benefit from a tool that does not require complex maintenance while delivering durable service life under typical industrial conditions. Practical application, traceability and integration The single inspection pin is suitable for go/no‑go evaluations, fit control and end‑measure tasks across production, assembly and toolmaking. The compact design makes it suitable for fixture insertion or manual gauging, while the declared tolerance allows planners to incorporate the pin into control plans and dimensional studies. For tailored measurement strategies or batch traceability, Metav Werkzeuge provides further product data and logistical support from its Emmerich hub, ensuring predictable supply for continuous operations. Speak to Metav Werkzeuge for delivery from Emmerich and specify the M323.I59 gauge pin for precise end‑measure checks and reliable workshop performance Technical data Article number: M323.I59 GTIN: 4061905071294 Manufacturer: Metav IndustryLine Category: Gauge pins Facts Diameter: 18.59 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Workshop version Material: Special steel Single inspection pin FAQ What is the declared tolerance of this inspection pin? The gauge pin M323.I59 is specified with a tolerance of ±0.002 mm, suitable for fine dimensional checks and fit testing. Which materials is the pin made from? The pin is made of special steel, providing wear resistance appropriate for routine workshop use. How is the pin typically used in quality control? Typical applications include end‑measure checks, bore and fit testing and go/no‑go evaluations where a fixed reference diameter is required. Can the pin be integrated into fixtures or manual gauges? Yes, the compact 50 mm length and standard geometry make the pin compatible with fixtures, insertion gauges and manual inspection processes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.61mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the workshop-grade construction, the ±0.002 mm tolerance and the compact 18.61 mm diameter for reproducible end‑dimension checks; order the test pin from Metav Werkzeuge or ask our consultants for application advice. Metav IndustryLine Test pin – 18.61 mm diameter, 50 mm length The Test pin, 18.61 mm (50 mm length) is a workshop‑grade gauge pin for precise end‑dimension inspection and fixture alignment in production and inspection tasks. Workshop-grade execution Diameter 18.61 mm, 50 mm length Tolerance ±0.002 mm Delivered in transport case Precision that keeps production within tolerance The compact, hardened gauge pin provides a certified mechanical fit with a stated tolerance of ±0.002 mm, making it suitable for high‑accuracy go/no‑go checks and repeatable reference measurements. The fine tolerance ensures consistent mating with sockets and bores, reducing rework and first‑article rejection rates. Where repeatability and a narrow error band are required, the reduced clearance afforded by the 18.61 mm diameter shortens setup time and improves inspection throughput by allowing confident pass/fail decisions on the shop floor. Robust material and workshop‑ready handling Manufactured from special steel and specified as a workshop‑grade item, the component combines hardness with dimensional stability for frequent handling. The 50 mm length offers a stable engagement depth while keeping weight low for easy mounting; the listed mass is 0.15 kg. Delivered in a protective transport case, the pin arrives ready for secure storage and transport between bench and inspection station, preserving surface finish and nominal dimensions over repeated use. Fits into established inspection and fixturing workflows Designed as a single test pin for direct insertion into gauges, sockets and alignment fixtures, this component integrates seamlessly into modular inspection rigs and quick‑change holders. Using it as a reference reduces measuring uncertainty during setup and supports traceable in‑process checks. The compact design and workshop specification make it a practical choice for maintenance, fixture set‑up and small‑batch production where precise end‑measure verification is essential. Identification: M323.I61 for ordering and inventory control. For workshop‑grade gauging with the Metav IndustryLine test pin M323.I61, contact Metav Werkzeuge for technical guidance and delivery arrangements via info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: M323.I61 GTIN: 4061905071836 Description: Test pin, 18.61 mm diameter, 50 mm length Weight: 0.15 kg Facts Diameter: 18.61 mm Length: 50 mm Tolerance / Accuracy: ±0.002 mm Special features Material: Special steel Workshop‑grade execution Delivery: protective transport case FAQ What is the intended use of this test pin? This test pin is intended for end‑dimension verification, fixture alignment and reference checks in workshop and inspection environments; the compact diameter and length suit small to medium bores. Which accuracy can be expected from the component? The pin is specified with a tolerance of ±0.002 mm, which supports tight go/no‑go decisions and improves repeatability in production checks. Is the material suitable for repeated shop‑floor use? Yes, the component is made from special steel and specified as workshop‑grade, offering a balance of hardness and durability for frequent handling. How is the product identified for ordering? Order reference is M323.I61; the entry includes GTIN 4061905071836 for inventory systems and procurement workflows. Does the delivery include protection for transport? The item is supplied in a protective transport case to preserve finish and dimensional integrity during shipping and storage. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.62mm Gauge Pin Single 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of high accuracy (±0.002 mm), compact 18.62 mm diameter and a robust special-steel construction for reliable end-measure verification in fine mechanical and workshop settings. Order the article directly via Metav Werkzeuge or consult our advisors for application support. Gauge pin M323.I62 – 18.62 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin M323.I62 is a single precision pin intended for end-measure verification and setting tasks in workshops and precision engineering, supplied as a workshop‑grade test pin with a 50 mm measuring length. Workshop-grade construction Diameter 18.62 mm for end measurements Tight tolerance ±0.002 mm Solid special-steel design Consistent accuracy for repeatable end measurements A compact precision element, this gauge pin delivers repeatability where narrow tolerances matter. With a nominal diameter of 18.62 mm and a declared accuracy of ±0.002 mm, the component is engineered to reduce measurement scatter during acceptance checks and tool set-up. The 50 mm measuring length provides a stable support for insertion and alignment tasks while the special steel material keeps deformation under load to a minimum, allowing consistent results across repetitive operations. Suited to micro-range precision and fine mechanical tasks Designed for small‑scale metrology, the pin sits within the micro-range of measurement tools and is therefore appropriate for precision workshops, gauge jigs and finishing operations where compact dimensions are essential. The article M323.I62 is useful for verifying bore ends, calibrating fixtures and establishing reference positions in assembly sequences. Its geometry simplifies integration into test benches and fixtures commonly used in precision engineering, making throughput improvements measurable and predictable. Built for workshop use and industrial wear resistance The workshop-grade execution reflects a focus on durability and day-to-day robustness. Manufactured from special steel, the pin resists surface wear and maintains diameter integrity under repeated insertion cycles, which reduces the need for frequent replacement and supports continuous production. This industrial construction pairs well with automated handling or manual inspection routines, offering a balance between resilience and the fine tolerances demanded by routine quality controls. Practical handling and process benefits in inspection workflows In practice, the gauge pin speeds up inspection routines by delivering a ready reference for end-measure checks and pass/fail trials. The 50 mm length aids secure clamping and stable positioning in gauges and bores, while the precise diameter and tight tolerance minimise measurement uncertainty when used alongside comparators, dial gauges or coordinate measurement devices. Implementing such a standardised pin in a measurement plan leads to quicker decision cycles, fewer reworks and higher confidence in dimensional conformity. For dependable, workshop-ready precision choose the Metav IndustryLine M323.I62 gauge pin—contact Metav Werkzeuge for tailored advice and to arrange dispatch from Emmerich. Technical Data SKU: M323.I62 GTIN: 4061905071843 Label: Gauge pin, single 18.62 mm length 50 mm Facts Diameter: 18.62 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Material: Special steel Special features Workshop‑grade execution Category: Gauge pins (Messstifte) Suitable for end‑measure verification Designed for repetitive insertion and alignment tasks FAQ What tolerance can be expected from this gauge pin? The M323.I62 gauge pin is specified with a tolerance of ±0.002 mm, making it suitable for fine mechanical and workshop measurement tasks. Which materials is the pin made from and how does that affect wear? This test pin is manufactured from special steel, which enhances surface durability and helps maintain dimensional stability under repeated use. Is the gauge pin suitable for setting fixtures and bore gauges? Yes, the pin’s 50 mm length and precise 18.62 mm diameter make it well suited for fixture setting, bore verification and alignment operations in precision engineering. Can this pin be used in automated inspection stations? The robust, workshop‑grade construction of the M323.I62 allows integration into automated handling and inspection systems where repeatability and resistance to wear are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.63mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Taking advantage of precision and robust workshop‑grade construction, this gauge pin delivers consistent end‑measurements with a tight ±0.002 mm tolerance and a handy 50 mm working length. Order the part directly via Metav Werkzeuge or contact our consultants for application advice. Gauge pin, single Ø18.63 mm, 50 mm length — ±0.002 mm tolerance (Metav IndustryLine) A Gauge pin, single Ø18.63 mm, 50 mm length designed for precise end‑measurements and setup checks in workshop and inspection environments. Workshop-grade execution Diameter Ø18.63 mm tolerance ±0.002 mm 50 mm working length for end measurements Supplied in protective transport case Precision tailored to micro‑scale tasks The pin belongs to the Micro range (max measuring range 10–100 mm), making it ideal where compact dimensions and minimal flex matter. With a declared ±0.002 mm tolerance, this measurement pin functions as a reliable reference for fine mechanical work and short‑range checks. The close tolerance reduces uncertainty during setup and inspection, which in turn lowers rework rates and shortens cycle times. The small footprint and stable geometry make the item particularly suitable for precision fixtures and components where repeatable end‑measurements are required. Durable design for everyday workshop use Constructed from special steel and executed as a workshop‑grade tool, the pin is built to withstand regular handling and rougher shop conditions while keeping measurement integrity. The 50 mm working length and compact diameter combine practical handling with sufficient reach for common end‑measurement tasks. A protective transport case is included for safe storage and secure transport between workstations or job sites, which preserves the measuring surface and extends service life without adding complexity to daily workflows. Faster, more reliable inspection and setup Using a precisely made measurement pin delivers tangible operational benefits: improved repeatability, quicker reference checks and reduced machine downtime during setup. Lightweight handling and compact dimensions simplify integration into test rigs and gauging assemblies, while the robust material choice maintains geometric stability over repeated use. The combination of accuracy and practical design supports a more efficient inspection routine and greater confidence in measurement results. For reliable micro‑precision in workshop tasks, contact Metav Werkzeuge to order the Metav IndustryLine gauge pin or request tailored application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M323.I63 GTIN: 4061905071850 Brand: Metav IndustryLine Material: Special steel Weight: 0.15 kg Length: 50 mm Diameter: 18.63 mm Declared tolerance: ±0.002 mm Facts Length: 50 mm Diameter: 18.63 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Workshop version Supplied in protective transport case Category: Micro (max measuring range 10–100 mm) Compact geometry for minimal flex FAQ What is the intended application for this gauge pin? The gauge pin is intended for precise end‑measurements, alignment checks and fixture verification in workshop and inspection settings; the Metav IndustryLine gauge pin M323.I63 is especially suited to micro‑scale tasks. How precise is the measurement pin? The pin is manufactured to a declared tolerance of ±0.002 mm, providing high‑precision reference results for short‑range measurement tasks. Which materials and environments is the pin suitable for? Made from special steel, the pin is designed for general workshop environments where mechanical durability and stable geometry are required. Is the gauge pin delivered ready for use and how is it packaged? The gauge pin is supplied in a protective transport case to preserve the measuring surfaces during storage and transit. Can this pin be used for fixture setup on small assemblies? Yes, the compact diameter and 50 mm working length make it well suited to fixture setup and component alignment on small to medium assemblies. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.64mm Gauge Pin, Workshop Version, 50mm Length, ±0.002 Accuracy - Metav IndustryLine
Precise workshop measurement combined with robust handling: the 18.64 mm gauge pin with a 50 mm usable length provides repeatable end‑measure verification and a tight variation of ±0.002 mm, ideal for routine inspection tasks in small‑part production. Supplied in a protective transport case, this workshop‑grade test pin streamlines dimensional checks and reduces rework. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single — 18.64 mm diameter, 50 mm length (Metav IndustryLine) Gauge pin, single — 18.64 mm diameter, 50 mm length is a workshop‑grade test pin for precise end‑measure verification and dimensional checks of small components in metrology and quality control. Workshop‑grade finish Precision diameter 18.64 mm 50 mm usable length for end measurements Supplied in protective transport case Reliable end‑measure verification for small components The pin is classified in the micro measuring range (up to 100 mm), making it suitable where compact size and high repeatability matter. Manufactured from special steel and finished for workshop use, the component offers a measured variation of ±0.002 mm, which supports consistent pass/fail decisions during routine inspections. The combination of a defined 18.64 mm diameter and a 50 mm length provides a stable contact area for end‑stop checks and calibrated references, reducing measurement scatter and improving throughput in repetitive testing sequences. Built for robust workshop handling and simple integration A workshop‑grade design ensures the pin resists everyday handling and remains stable under normal inspection forces. The moderate mass (approximately 0.15 kg) and compact geometry allow easy positioning in fixtures or on datum surfaces, while the hardened surface of the special steel minimises wear during repeated cycles. Delivered in a protective transport case, the test pin arrives ready for use and is protected in transit — an advantage for mobile measurement teams and busy shop floors where secure storage and transport matter. Traceability, identification and practical use in inspection workflows Identified as M323.I64 and registered under GTIN 4061905071867, the pin supports orderly inventory and traceability in quality systems. Its straightforward geometry simplifies visual and tactile checks and keeps measurement setups concise, which helps reduce set‑up time on gauges and fixtures. As a Metav IndustryLine tool, the component benefits from the company's emphasis on making high precision accessible: a broad product range and consolidated supply reduce procurement complexity and increase process reliability for workshops and small production lines. For reliable small‑part inspection, request the Metav IndustryLine M323.I64 gauge pin through Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored advice Technical data SKU: M323.I64 GTIN: 4061905071867 Eclass: 21170231 Material: Special steel Weight: 0.15 kg Facts Diameter / measuring range: 18.64 mm Length: 50 mm Accuracy variation: ±0.002 mm Special features Workshop-grade finish Supplied in protective transport case Category: Gauge pins Label: Prüfstift, single, 18.64 mm length 50 mm FAQ What is the intended application for this gauge pin? The gauge pin is designed for end‑measure verification and dimensional checks of small components; it suits workshop inspection routines and fixture checks where a precise reference of 18.64 mm is required. What material is the pin made from and how does that affect wear? Made from special steel, the pin provides a hardened contact surface that improves wear resistance during repeated measurements and prolongs service life in workshop environments. Is the pin supplied ready for transport and storage? Yes, the test pin is delivered in a protective transport case to protect the reference surface during shipment and handling. Which accuracy can be expected when using this pin? The item has a variation specification of ±0.002 mm, suitable for precise repeatability in small‑part inspection tasks. How is the product identified for traceability? Identification is via SKU M323.I64 and GTIN 4061905071867, which supports inventory management and traceability in quality systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.65mm Gauge Pin, 50mm Length, Workshop Version, Special Steel, ±0.002 Accuracy, Supplied In Case - Metav IndustryLine
Precision plug ensures repeatable diameter checks with ±0.002 mm tolerance and robust special steel construction; supplied in a transport case for safe handling. Order this gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single – Ø 18.65 mm, length 50 mm (Metav IndustryLine) A gauge pin, single, Ø 18.65 mm, designed for reliable diameter verification and end-measure checks in workshop and inspection routines Workshop version for robust everyday use Tolerance ±0.002 mm for high precision Special steel for wear resistance Supplied in transport case for safe storage Accurate diameter verification for repeatable inspection results The cylindrical pin provides a clearly defined reference for go/no-go and comparative checks, with a specified tolerance of ±0.002 mm that supports tight production tolerances. As a hardened measurement element, the pin converts dimensional uncertainty into a reproducible datum: the stated Ø 18.65 mm ensures fast verification of bore diameters, seating fits and end measures while reducing rework caused by ambiguous readings. This design suits workshop inspection benches and in‑process control stations where consistent repeatability accelerates quality decisions. Robust construction for long service life in workshop environments Manufactured from special steel, the pin is optimised for abrasion resistance and dimensional stability under regular use. The workshop version balances hardness with toughness to tolerate handling and typical bench conditions without sacrificing metrological integrity. Supplied in a transport case, the pin is protected during storage and transit, which extends service life and maintains the calibrated surface condition. The combination of material choice and protective packaging reduces downtime for replacements and preserves measurement fidelity over many inspection cycles. Practical handling and application-oriented design At 50 mm overall length the pin is convenient for hand insertion and bench-mounted checks while providing sufficient contact length for secure seating in tapered or stepped bores. As a simple, mechanical reference element, the pin requires no power or data output and integrates smoothly into existing inspection workflows. Where precise end measurements or plug checks are required, this measurement pin provides a straightforward, low‑maintenance solution that complements micrometre and gauge-block setups in daily quality control. Contact Metav Werkzeuge for specification advice or to request a quotation for this Metav IndustryLine gauge pin with ±0.002 mm accuracy Technical Data Article number: M323.I65 GTIN: 4061905072352 Manufacturer: Metav IndustryLine Facts Diameter: 18.65 mm Length: 50 mm Weight: 0.15 kg Accuracy: ±0.002 mm Special features Material: Special steel Version: Workshop edition Packaging: Supplied in transport case FAQ What tolerance does the gauge pin offer? The gauge pin is specified with an accuracy of ±0.002 mm, suitable for fine workshop inspection tasks. Which material is used for the pin? The pin is made from special steel, chosen for wear resistance and dimensional stability during routine checks. Is the pin supplied with protective packaging? Yes, the gauge pin is supplied in a transport case to protect the measuring surfaces during storage and transit. How long is the measurement contact area? The pin has an overall length of 50 mm, providing adequate contact for bore and end‑face checks. Can this pin be used for go/no-go checks? This cylindrical measurement element is suitable for go/no‑go and seating checks where a defined reference diameter of 18.65 mm is required. Is the product compatible with standard bench inspection setups? The compact, hardened design integrates directly into common inspection benches and complements handheld micrometres and gauge blocks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.66mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of precise size control and workshop-ready robustness for reliable end‑measure checks; the combination of ±0.002 mm accuracy, a true diameter of 18.66 mm and a 50 mm length yields consistent fit verification with little setup time. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.I66 — 18.66 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin 18.66 mm designed for accurate fit checks and end‑measure verification in workshop metrology. High precision ±0.002 mm accuracy Diameter 18.66 mm, length 50 mm Robust special steel, workshop version Repeatable size control for production-ready parts The inspection pin is manufactured to a tight tolerance of ±0.002 mm, providing a measurable reference that supports reproducible fit checks and final dimension acceptance in serial work. With a nominal diameter of 18.66 mm and a working length of 50 mm, the component serves as a straightforward go/no‑go reference for bores, clearances and mating parts. The clear numeric specification removes ambiguity during quality checks and helps to reduce false rejects by offering a verifiable datum for routine inspection tasks. Built for daily workshop handling and longevity Constructed from special steel and presented as a workshop version, the pin combines surface stability with resistance to the light shocks and handling typical in production environments. The mass of approximately 0.15 kg provides a solid feel without being unwieldy for bench inspection, while the single‑piece design minimises handling complexity. This robustness translates into lower replacement frequency and a steady inspection routine, saving time otherwise lost to frequent re‑adjustment or calibration cycles. Fast integration into inspection workflows As a single reference pin, the item simplifies end‑measure operations: insert, check, document. The compact geometry and fixed diameter reduce fixturing needs and speed up throughput in small‑batch or larger production runs. Where traceability is required, the clear SKU and GTIN ensure easy recording in inventory and quality logs; for specialised measurement chains, the pin functions as a reliable mechanical datum that supports consistent decision‑making during assembly and final inspection. Contact Metav Werkzeuge today to confirm how the Metav IndustryLine gauge pin M323.I66 fits into existing inspection routines and to request personalised advice from our consultants in Emmerich Technical data Name: Prüfstift, einzeln, 18,66 mm Länge 50 mm Article number: M323.I66 GTIN: 4061905072369 Manufacturer: Metav IndustryLine Facts Diameter: 18.66 mm Length: 50 mm Accuracy / tolerance: ±0.002 mm Weight: 0.15 kg Measurement range min/max: 18.66 mm / 18.66 mm Special features Material: special steel Workshop version Single inspection pin FAQ What tolerance is specified for this gauge pin? The Metav IndustryLine gauge pin (SKU M323.I66) is specified with a tolerance of ±0.002 mm. What is the primary application of this inspection pin? The inspection pin is intended for end‑measure verification, fit checks and as a mechanical datum for bore and clearance testing in workshop metrology. Is a calibration certificate included with the pin? No ISO 17025 calibration certificate is indicated for this item; standard delivery does not include an accredited calibration document. How should the pin be handled to preserve accuracy? Handle the pin with clean, dry hands or gloves, avoid shocks and store in a dry environment to prevent corrosion; regular visual inspection is recommended to detect wear. Can this pin be used for go/no‑go checking of mating parts? Yes, the fixed diameter and tight tolerance make the pin suitable as a reference for go/no‑go fit checks and final acceptance testing. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.67mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Combining ±0.002 mm repeatability with a special steel construction and a compact 50 mm length, this gauge pin delivers dependable end‑measure checks and stable reference points in routine inspection tasks. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for technical advice. Gauge pin M323.I67 — Test pin, 18.67 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin M323.I67 is a precision test pin designed for end‑of‑line checks and reference measuring in workshop and production inspection setups. High repeatability ±0.002 mm Special steel construction Precision diameter 18.67 mm Compact 50 mm nominal length Reliable precision for everyday inspection The core benefit of this reference pin is consistent metrology: a diameter of 18.67 mm combined with a tolerance of ±0.002 mm produces highly reproducible contact conditions for end‑measure checks. In practical terms, the tiny permissible deviation lowers measurement uncertainty when comparing batch parts or setting up go/no‑go fixtures, which translates into fewer false rejects and a smoother quality workflow. The supplied dimensions and tolerance make the component suitable as a fixed reference in jigs and small inspection benches. Robust design that keeps production moving Built from special steel, the pin is finished for wear resistance and stable contact behaviour under repeated use. At a nominal length of 50 mm and a mass of 0.15 kg, the component balances manoeuvrability and stiffness, giving good handling on the bench while avoiding bending under normal contact forces. The workshop design is intended for routine production environments where durability and repeatability matter most: a single test pin can reduce fixture downtime and support quicker set‑ups, improving throughput in small to medium manufacturing operations. Easy integration into measurement routines As a plain cylindrical reference, the pin fits common clamping and locating systems and serves well for end‑measure, datum and reference checks. The straightforward geometry simplifies traceability: the part number and GTIN allow clear inventory handling and quick re‑ordering. For applications that require documented traceability, the pin can be recorded as the reference element in inspection protocols and fixture documentation. Metav’s product range and consultancy back the technical selection, so choosing a standardised reference component becomes part of a reliable supply chain rather than a one‑off decision. For precise end‑measure control, request the Metav IndustryLine gauge pin from Metav Werkzeuge and benefit from targeted advice and fast dispatch. Basic identifiers SKU: M323.I67 GTIN: 4061905072376 Manufacturer: Metav IndustryLine Core measurements Diameter: 18.67 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Workshop version for routine use Material: special steel Application: end‑measure checks and reference gauging FAQ What tolerance does the gauge pin offer? The gauge pin provides a tolerance of ±0.002 mm, ensuring high repeatability for reference and end‑measure tasks. Is the material suitable for frequent contact checks? Yes, the pin is made from special steel, selected for wear resistance and stable contact properties during repeated inspections. Can this pin be used in fixture and jig set‑ups? The M323.I67 is designed for integration into fixtures and locating systems as a reference element for routine measurement and alignment. What is the nominal length and diameter of this test pin? The test pin measures 50 mm in length with a precision diameter of 18.67 mm, offering a compact yet stiff reference for bench use. How should the pin be recorded for inventory and traceability? Use the SKU M323.I67 and GTIN 4061905072376 in inspection documentation to maintain traceability and simplify re‑ordering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.68mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of workshop-grade construction, ±0.002 mm tolerance and a compact 18.68 mm nominal diameter for reliable end‑measurement routines; order the gauge pin directly via Metav Werkzeuge or consult our specialists for batch availability and compatibility. Gauge pin, single, 18.68 mm diameter, 50 mm length — Metav IndustryLine workshop execution with high tolerance Gauge pin, single, 18.68 mm diameter, 50 mm length provides a compact, high‑precision reference for end‑measurements and component checks in demanding workshop environments Workshop-grade construction Diameter 18.68 mm precision Length 50 mm for end measurements Tolerance ±0.002 mm accuracy Repeatable end measurements with micrometre-level control The single gauge pin is engineered for repeatable reference checks on bores, seats and end faces. With a nominal diameter of 18.68 mm and a declared tolerance of ±0.002 mm, it establishes a reliable measuring datum that reduces uncertainty during routine inspections. The special steel construction maintains form under mechanical stress, so process checks and simple go/no‑go verifications become faster and more consistent, lowering the need for corrective rework and shortening inspection cycles. Robust handling and workshop suitability Built as a workshop‑grade tool, the pin combines a compact 50 mm length with a manageable mass of 0.15 kg, making it straightforward to position by hand or in simple fixtures. The material choice supports repeated use in a busy production setting while keeping maintenance demands low. This compact format is particularly useful where space is limited but measurement integrity is essential, enabling quick insertion and withdrawal without disturbing adjacent features. Easy integration into inspection workflows and traceability The gauge pin is supplied under the Metav IndustryLine label and is identified as M323.I68, facilitating stock keeping and traceability within inspection plans. Its compact geometry and tight tolerance make it suitable for repeated inline checks or cyclical sampling protocols. Combined with Metav’s quality assurance approach and broad product range, this pin serves as a practical, dependable component of a workshop’s measurement toolkit, helping to uphold production standards across batches. Contact Metav Werkzeuge for availability, matching accessories and technical documentation for this Metav IndustryLine gauge pin (M323.I68) Technical data SKU: M323.I68 GTIN: 4061905072383 Brand: Metav IndustryLine Material: Special steel Nominal diameter: 18.68 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Facts Diameter: 18.68 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Special features Workshop execution Single gauge pin for end measurements Compact geometry for tight spaces Identified as M323.I68 for traceability FAQ What is the nominal diameter and tolerance of this gauge pin? The gauge pin (Metav IndustryLine, M323.I68) has a nominal diameter of 18.68 mm and a tolerance of ±0.002 mm. Which material is used for the pin and why is it chosen? This Metav IndustryLine gauge pin is made from special steel; the material provides the mechanical robustness required for frequent workshop use while preserving the pin’s dimensional stability. Is the pin suitable for end‑measurement of bores and seats? Yes, the single gauge pin M323.I68 is intended for end measurements and reference checks on bores, seats and end faces where a compact, precise datum is required. How is the product identified for stock and traceability? The product is referenced as M323.I68 and carries GTIN 4061905072383 to simplify inventory control and documentation in inspection workflows. Can the gauge pin be used in fixture or holding devices? The compact 50 mm length and robust construction of the Metav IndustryLine gauge pin make it compatible with simple fixtures and holding devices commonly used for repetitive inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.69mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Compact workshop‑grade gauge pin that combines a snug Ø 18.69 mm fit, a 50 mm functional length and a fine tolerance of ±0.002 mm for repeatable end‑dimension checks; robust special steel construction supports reliable, routine inspections. Order the test pin directly via Metav Werkzeuge or ask our consultants if needed. M323.I69 Test Pin — Workshop test pin, Ø 18.69 mm, 50 mm length (Metav IndustryLine) The M323.I69 is a compact, high‑precision workshop test pin intended for end‑measure verification and fixture checks in general metrology and production environments Precision fit Ø 18.69 mm 50 mm functional length Tolerance ±0.002 mm Workshop version, robust construction Reduce rework with traceable dimensional stability A tight tolerance of ±0.002 mm ensures that the gauge pin provides consistent reference dimensions during repetitive end‑measure checks. The controlled diameter of 18.69 mm reduces play in fixtures and holding devices, which in turn minimises setup variability and scrap. Presented as a single test pin, this component is suitable for insertion into gauge stacks, plug‑gauge holders and dedicated inspection jigs where a reliable reference diameter is required. Built for everyday workshop handling With a 50 mm functional length and a compact form, the pin is optimised for workshop applications where accessibility and handling speed matter. The body is manufactured from special steel, chosen for wear resistance and dimensional stability under normal workshop conditions; this supports extended service life and stable repeatability across shifts. The workshop design emphasises straightforward integration into existing inspection routines without demanding specialised mounting or bespoke tooling. Confidence from a proven supplier network Procurement through Metav IndustryLine connects the component to a broad supply chain and a clear quality philosophy: practical, dependable metrology affordable for everyday industrial use. The product’s weight and dimensions make it simple to store and deploy on the shop floor, while Metav’s experience and catalogue coverage provide reassurance when matching pins to fixtures or complementary gauge elements. Technical advice and specification matching are available from the Metav team to support correct selection for specific measurement tasks. Contact Metav Werkzeuge for tailored advice on using the M323.I69 in gauge assemblies or for recommendations on compatible inspection accessories Technical data SKU: M323.I69 GTIN: 4061905072390 Manufacturer: Metav IndustryLine Core specifications Diameter: 18.69 mm Functional length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop version Single test pin delivery FAQ What is the primary use of this test pin? The test pin serves as a precise reference for end‑dimension checks, fixture set‑up and plug‑gauge based inspections using the M323.I69 test pin from Metav IndustryLine. Is the diameter suitable for precision gauge stacks? Yes, the 18.69 mm nominal diameter is manufactured to a fine tolerance (±0.002 mm), making the pin appropriate for use in gauge assemblies and fixture references. Can this pin be used for repeated production checks? The workshop design and special steel construction of the M323.I69 support routine production use and repeated insertion in inspection fixtures. How should the pin be stored to maintain accuracy? Store the pin clean and dry, ideally in protective packaging when not in use, to prevent surface contamination and preserve dimensional stability. Does the product include a certificate of calibration? No specific calibration certificate is included by default; the specification lists the manufacturing tolerance of ±0.002 mm for dimensional reference. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.6mm Test Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of tight ±0.002 mm tolerance, robust special-steel construction and compact 50 mm length for reliable end-size checks and fixture alignment. Order the gauge pin directly via Metav Werkzeuge or contact the Metav consultants for tailored technical advice. Gauge pin, single — 18.6 mm Ø, 50 mm length (Metav IndustryLine) A gauge pin designed for precise end-size verification and locating tasks in workshop and production environments Workshop version for robust daily use Diameter 18.6 mm, precision ±0.002 mm 50 mm compact length for tight spaces Special-steel construction for long service life Consistent, measurable precision for end-size gauging The compact gauge pin delivers repeatable results thanks to a documented geometric tolerance of ±0.002 mm, which places it in a high-precision class suitable for fine gauging tasks. This level of conformity supports controlled assembly processes and accurate go/no-go checks on mating bores and locating features. The nominal diameter of 18.6 mm is produced to exacting roundness and straightness standards, ensuring that positional references and end-size comparisons remain stable during routine use. Such traceable precision reduces rework and helps maintain production throughput. Durable design built for workshop conditions Constructed from special steel, this single test pin is finished for workshop resilience and frequent handling. The 50 mm shank length and compact form factor make it straightforward to insert into fixtures and measurement rigs where space is limited, while the material choice balances hardness with wear resistance to preserve the measuring surface over repeated cycles. The unit mass of 0.15 kg gives a satisfying handling feel without excess bulk. The workshop specification signals suitability for daily use in tooling rooms, maintenance bays and production lines where robustness complements measurement reliability. Integrates smoothly into inspection and assembly routines The pin is intended for end-size verification, locating and alignment tasks in jigs, fixtures and inspection stands. Its precise diameter and controlled tolerance simplify pass/fail decisions during incoming inspection or in-process checks, and it pairs well with standard gauge blocks, bore gauges and fixture plates. For buyers seeking an immediately identifiable article, the product is listed under SKU M323.I60 and carries GTIN 4061905071300 for inventory and traceability. The combination of compact dimensions and tight tolerance supports efficient quality routines and reduces subjective judgement in manual gauging procedures. For dependable gauging components choose the Metav IndustryLine gauge pin M323.I60—contact Metav Werkzeuge for technical consultation or to arrange a direct supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M323.I60 GTIN: 4061905071300 Brand: Metav IndustryLine Facts Diameter: 18.6 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop version Intended for end-size verification and locating FAQ What tolerance can be expected from this gauge pin? The gauge pin is manufactured to a tolerance of ±0.002 mm, providing high repeatability for end-size and locating measurements with the Metav IndustryLine test pin M323.I60. Is a calibration certificate included with the product? The product data does not specify an included calibration certificate; calibration status is not stated for this gauge pin in the supplied information. Which applications is the pin suited for? Typical uses include end-size verification, locating and alignment in jigs and fixtures, in-process checks and incoming inspection where an 18.6 mm reference diameter is required. What material is used and how durable is the pin? The pin is made of special steel, produced as a workshop-grade item to withstand frequent handling and maintain dimensional stability over time. How is the item identified for ordering and inventory? This gauge pin is listed under SKU M323.I60 and can be referenced with GTIN 4061905071300 for procurement and inventory systems. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.71mm Test Pin Single, Workshop Version, 50mm Length - Metav IndustryLine
High-precision workshop pin in special steel with a measured diameter of 18.71 mm and a length of 50 mm, offering repeatable inspection performance at a tolerance of ±0.002 mm. Benefit from robust construction and a protective transport case for safe handling — order directly via Metav Werkzeuge or consult our specialists for supply options. Gauge pin, single — 18.71 mm Ø, 50 mm length (Metav IndustryLine) The gauge pin, single 18.71 mm is a workshop-grade precision pin designed for dimensional verification, fixture setting and go/no-go checks in production and inspection environments. Workshop-grade special steel construction Tolerance ±0.002 mm for high repeatability 18.71 mm cylindrical diameter Delivered in protective transport case Faster, more reliable inspection results A tight tolerance of ±0.002 mm minimises measurement uncertainty and reduces rework by providing clear go/no-go feedback during first-pass inspection. The defined 18.71 mm diameter serves as a stable reference for gauge blocks, plug gauges and fixture alignment; using a fixed-diameter reference accelerates pass/fail decisions and shortens inspection cycles. For production managers and quality engineers, the direct consequence is improved throughput and fewer ambiguous measurements in routine checks. Durable design that suits workshop environments Constructed from special steel, this single test pin is specified as a workshop-grade component and stands up to frequent handling and bench use. The 50 mm length gives sufficient engagement for many jigs and fixtures while keeping the pin easy to position by hand; the modest weight contributes to operator ergonomics during repetitive tasks. Supplied in a protective transport case, the pin arrives ready for safe storage and transport between inspection points without risk of damage to the measuring end. Simple integration into quality workflows As a single, traceable reference pin, this item fits neatly into fixture assemblies, plug gauges and measuring stations where a definitive diameter check is required. The stable geometry makes the component suitable for repeated comparative measurements, fixture set-up and final inspection steps. Where documentation or batch identification is required, the item is supplied with standard product identifiers for inventory and traceability within a calibrated inspection routine. Request supply and technical details for the Metav IndustryLine gauge pin M323.I71 from Metav Werkzeuge in Emmerich for tailored delivery and specification advice Technical Data SKU: M323.I71 GTIN: 4061905072413 Label: Prüfstift, einzeln, 18,71 mm Länge 50 mm Weight: 0.15 kg Numbers / Core technical data Diameter: 18.71 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop version Single gauge pin Supplied in protective transport case FAQ What is the declared measurement tolerance of this pin? The declared tolerance is ±0.002 mm for the gauge pin M323.I71 from Metav IndustryLine, providing high repeatability for inspection tasks. Which material is the pin made from? The pin is manufactured from special steel, chosen for wear resistance and dimensional stability under workshop conditions. Is this pin suitable for fixture setting and go/no-go checks? Yes; the single gauge pin is designed specifically for fixture setting, go/no-go checking and dimensional verification in production and inspection workflows. What are the dimensional identifiers for this product? The product is identified as SKU M323.I71 with GTIN 4061905072413 and has a diameter of 18.71 mm and a length of 50 mm. How is the pin delivered to protect the measuring face? The item is supplied in a protective transport case to prevent handling damage and to simplify storage between uses. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com