Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
17.99mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Precision inspection becomes straightforward with a workshop‑grade gauge pin that pairs a nominal 17.99 mm diameter with a tight ±0.002 mm manufacturing tolerance and resilient special steel construction; order the gauge pin directly via Metav Werkzeuge or ask the consultants if assistance is required. Gauge pin, single, 17.99 mm × 50 mm — Metav IndustryLine workshop version The gauge pin, single, 17.99 mm × 50 mm is a compact inspection probe designed for end‑measure checks and plug‑gauge applications in workshop environments. Precision diameter 17.99 mm, ±0.002 mm tolerance 50 mm length for compact gauge setups Made from special steel for durable use Accurate inspection for repeatable results A tight dimensional tolerance of ±0.002 mm combined with the 17.99 mm nominal diameter delivers measurable repeatability for go/no‑go and end‑measure checks. The reduced allowance helps to limit ambiguous pass/fail decisions and shortens inspection loops, supporting a lean quality workflow. In practice, this level of precision reduces downstream rework and streamlines in‑machine verification by providing a clear reference point for fixture set‑up or comparative gauging; the single‑piece format suits targeted checks where one reference probe is required. Durable construction built for workshop use Manufactured from special steel, this workshop variant is engineered for routine handling in industrial settings. The material choice favours wear resistance under repeated insertion and withdrawal cycles, preserving the gauge geometry over time and sustaining the stated tolerance. The rugged construction suits bench work and production‑line checks where components are sampled frequently and durability is essential to maintain calibration intervals and ensure consistent measurement results. Compact design that fits measurement routines With a 50 mm length and a mass of 0.15 kg, the probe balances accessibility and stability: the short form factor permits use in confined fixtures while still providing sufficient contact length for secure handling. Supplied as a single gauge pin, it integrates easily into existing plug‑gage sets, fixture checks or portable inspection benches without excess overhang that can introduce measurement variability. The straightforward geometry simplifies interpretation of contact points, helping technicians focus on decisive measurement outcomes rather than setup complexity. For reliable workshop measurements choose the Metav IndustryLine gauge pin M323.H99 — contact Metav Werkzeuge to discuss supply and compatibility with existing inspection equipment Technical data Article number: M323.H99 GTIN: 4061905071003 Brand: Metav IndustryLine Facts Diameter: 17.99 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop version Single gauge pin FAQ What are the precise dimensions and tolerance of this gauge pin? The gauge pin has a nominal diameter of 17.99 mm and a length of 50 mm with a manufacturing tolerance of ±0.002 mm; the Metav IndustryLine gauge pin (M323.H99) is supplied as a single inspection probe. Is the material specified suitable for frequent use in a workshop? Yes, the pin is made from special steel, chosen to withstand routine insertion cycles and provide resistance to wear so that the dimensional stability is preserved during typical workshop handling. Which inspection tasks is this type of gauge pin suited to? This style of gauge pin is intended for end‑measure checks, plug‑gauge verifications and fixture set‑up where a single reference probe of 17.99 mm is required for pass/fail evaluation or comparative measurement. How should the gauge pin be handled to maintain accuracy? Handle the probe by the shank, avoid impacts or dropping, keep contact faces free from debris and store in a dry, cushioned location to minimise nicks and preserve the stated tolerance. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.9mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of industrial precision, robust special steel construction and compact handling for reliable dimensional checks in the workshop; place orders or request advice directly via Metav Werkzeuge to keep inspection routines efficient and reproducible. Gauge pin, single, 17.90 mm, length 50 mm — Metav IndustryLine Gauge pin, single, 17.90 mm, length 50 mm serves as a dedicated inspection pin for quick bore checks and end-dimension verification in production and toolrooms. Gauge pin Ø 17.90 mm, length 50 mm Workshop design, robust special steel Tolerance ±0.002 mm for precise checks Supplied individually for controlled use Consistent, certified-level checking for everyday quality control A compact inspection pin designed for routine dimensional verification, the gauge pin with Ø 17.90 mm and length 50 mm provides a simple yet reliable way to confirm end dimensions and bore fits. With an applied tolerance of ±0.002 mm, this tool supports close limit checking where repeatability matters; the stated tolerance reflects the pin's manufacturing precision and makes it suitable for tasks that require more accuracy than common workshop gauges. The slim, single-piece design reduces handling variables and simplifies comparison checks against reference gauges or fixture seats. Robust construction that stands up to workshop use Manufactured from special steel, the pin combines wear resistance with stable geometry for repeated measurements. The workshop design emphasises durability: smooth surfaces reduce the risk of damage to both the pin and the workpiece, while a compact mass (approx. 0.15 kg) ensures easy handling during frequent checks. This balance of toughness and manageability supports efficient inspection loops on the shop floor, reducing downtime associated with re‑sets or repeat measurements. Practical integration into inspection workflows As a single, dedicated inspection pin supplied individually, this item is ready for insertion into test fixtures, comparison holes or bench checks without additional assembly. Its nominal diameter and fixed length simplify traceability in inspection records and help standardise go/no-go assessments in serial production. For environments where a sequence of quick checks keeps throughput high, the straightforward geometry of this pin reduces operator training time and streamlines measurement routines. Why this choice benefits procurement and workshop teams Choosing a purpose-made inspection pin in special steel with ±0.002 mm tolerance reduces uncertainty during acceptance checks and saves time that would otherwise be spent on secondary verification. The item’s focused functionality supports lean inspection concepts: minimal set-up, immediate readout via comparison, and predictable behaviour under repeated use. Together with Metav IndustryLine’s product selection, this pin suits machine shops, maintenance departments and quality control benches that prioritise reliable, repeatable checks over decorative or multifunction tools. Contact Metav Werkzeuge for procurement details and to align the Metav IndustryLine gauge pin with specific measurement standards in your facility Technical data Article number: M323.H90 GTIN: 4061905449215 Manufacturer: Metav IndustryLine Category: Gauge pins Facts Diameter: 17.9 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop version Supplied individually Label: Prüfstift, single inspection pin FAQ What is this gauge pin used for? The gauge pin is intended for quick bore checks and end-dimension verification in production, toolrooms and quality control benches. What dimensional accuracy does the pin offer? The pin provides a manufacturing tolerance of ±0.002 mm, making it suitable for close-limit inspection tasks requiring fine repeatability. What material is the inspection pin made from? The inspection pin is made from special steel, selected for wear resistance and stable geometry under repeated use. How is the item supplied? The gauge pin is supplied individually, prepared for immediate use in fixtures or bench checks. Which work environments are best suited to this pin? Machine shops, maintenance departments and small-batch production lines benefit from the pin’s compact form and precision for routine dimensional checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17mm Test Probe 50mm Length Workshop Version - Metav IndustryLine
Take advantage of precision to ±0.002 mm, robust special‑steel construction and a compact 50 mm length for stable end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for tailored application advice. Gauge pin M323.H00 — workshop‑grade test pin, 17.00 mm diameter, 50 mm length The gauge pin M323.H00 is a single test pin designed for reliable end‑dimension checks and assembly verification in workshop and inspection environments. Diameter 17.00 mm, tolerance ±0.002 mm 50 mm length, workshop execution Made from high‑grade special steel Precision where end dimensions matter Engineered for tight end‑dimension control, this gauge pin offers a declared accuracy of ±0.002 mm, making it suitable for fine rejection limits and reference measurements in production checks. The defined 17.00 mm diameter delivers a reproducible datum for plug gauges, fixture set‑ups and mating part verification, reducing the risk of false rejects and rework. With such accuracy, measurement chains gain stability and traceability, which supports process control and quality documentation in machining and assembly operations. Robust construction for everyday workshop use Built in a workshop execution, the measuring pin combines a compact 50 mm working length with special‑steel durability to withstand frequent handling and insertion cycles. The compact form factor keeps bending and play to a minimum while remaining easy to fit into pin racks or inspection fixtures. The choice of special steel balances wear resistance and manufacturability, ensuring consistent diameters over many cycles and a long service life in standard production environments. Practical integration into gaging workflows As a single‑piece measuring element, the M323.H00 functions as a reference pin for end‑dimension inspection, assembly alignment and template checks. The compact design and clearly defined diameter simplify storage in pin sets and allow straightforward replacement of worn pins without recalibrating entire fixtures. Traceable identification via SKU and GTIN supports purchase reproducibility and inventory control within established procurement workflows, facilitating fast reordering and consistent quality across batches. For precise end‑dimension control, request the M323.H00 gauge pin from Metav Werkzeuge or consult our specialists for application‑specific recommendations and supply options. Technical data Article number: M323.H00 GTIN: 4061905071379 Label: Test pin, single, 17.00 mm diameter, 50 mm length Facts Diameter: 17.00 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.15 kg Special features Workshop execution Material: special steel Single test pin (individual item) FAQ What tolerance is guaranteed for this gauge pin? The gauge pin M323.H00 is specified with an accuracy of ±0.002 mm, suitable for tight end‑dimension checks and reference measurement tasks. Which materials and applications suit this test pin? Made from special steel, the pin is intended for general workshop and inspection use such as plug gauge checks, assembly alignment and fixture references. Is the pin supplied as an individual item or in a set? This is supplied as a single test pin (individual item) under SKU M323.H00 for flexible use in existing pin sets or fixtures. How does the compact length affect measurement stability? The 50 mm working length provides a balance between accessibility and rigidity, reducing deflection during insertion and improving repeatability in typical workshop scenarios. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17–18mm Gauge Pin Set 101 Pc 0.01mm Graduation With Probe Holder In Case - Metav IndustryLine
Take advantage of the combination of 0.01 mm step accuracy and a robust special steel construction for reproducible diameter checks and fewer reworks on the shop floor; order the pin gauge set directly via Metav Werkzeuge or ask our consultants if needed. Pin gauge set M318.587 — 17–18 mm, 0.01 mm increments (Metav IndustryLine) The Pin gauge set delivers precise diameter verification for workshop and inspection tasks, suited to use in toolrooms and quality-control benches. Accurate 0.01 mm increments Measurement range 17.00–18.00 mm Made from special steel Includes pin holder for secure handling Reliable sizing that reduces inspection uncertainty The set offers 0.01 mm diameter steps combined with a verified accuracy of ±0.004 mm, enabling reliable go/no-go checks and incremental sizing. Such resolution supports tight-tolerance work and simplifies decision-making during incoming inspection or final checks. Using fine increments minimises interpolation and makes it easier to select the correct rework strategy when clear evidence of deviation is required. The result is faster throughput and fewer ambiguous measurements on precision parts. Built for repeatable handling and safe storage Manufactured from special steel, the pins resist wear under frequent use while maintaining dimensional stability. The ensemble includes a secure pin holder, which keeps individual gauges organised and reduces handling damage during measurement sequences. The complete set is supplied in a compact transport case, facilitating safe movement between bench and machine or secure storage between shifts. These design choices protect the measuring surfaces and prolong service life, lowering total cost of ownership in busy workshops. Practical for toolrooms, gauge shops and quality control This comprehensive gauge solution is ideal where precise diameter verification is required for jigs, fixtures or mating components. In a toolroom or inspection lab the pins act as reference standards for bore checks and for confirming roundness or fit tolerances. The clear step size and robust material support both rapid shop-floor checks and more formal inspection processes, helping to reduce scrap rates and support consistent assembly quality across production batches. Handling, maintenance and longevity Simple maintenance keeps the set performing: wipe measuring faces with a lint-free cloth and a light corrosion inhibitor after use, and store pins in the supplied case to prevent nicks. Occasional visual inspection of contact faces will reveal any damage that could affect results; damaged pins should be segregated to avoid misleading measurements. Proper handling routines and the included pin holder ensure repeatability and traceable results over many inspection cycles. For supply and technical selection of the Metav IndustryLine pin gauge set, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for tailored advice and prompt delivery. Technical data Article number: M318.587 GTIN: 4054469156248 Customs tariff no.: 90173000 Manufacturer: Metav IndustryLine Core data Measurement range: 17.0–18.0 mm Increment: 0.01 mm Accuracy: ±0.004 mm Pieces per set: 101 Weight: 13 kg Length: 50 mm Special features Material: Special steel With pin holder Delivered in transport case Category: Pin gauges / gauge pins Label: Prüfstift-Satz, 17–18 mm, 0.01 mm steps FAQ What tolerance can be expected from this pin gauge set? The Metav IndustryLine pin gauge set (M318.587) is specified with an accuracy of ±0.004 mm, which supports precise diameter verification for standard workshop and inspection tasks. Is the set suitable for routine shop-floor checks or only for laboratory use? Designed for practical workshop use, the pin gauge set combines durable special steel construction and a transport case, making it well suited for both shop‑floor checks and more formal quality-control routines. How should the pins be maintained to preserve accuracy? After use, wipe the measuring faces with a lint-free cloth and a light corrosion inhibitor, store pins in the supplied transport case and keep the pin holder in use to avoid contact damage. Does the delivery include accessories for handling? Yes, the delivery includes a dedicated pin holder and a protective transport case to support organised handling and safe storage of the pins. Can these pins be used to check bore fits and gauge mating parts? The gauge pins in this set are intended for diameter verification, go/no-go checks and fit assessment of mating parts, providing clear, incremental evidence for acceptance or rework. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18 mm Gauge Pin, 50 mm Length, Workshop Version, Special Steel, ±0.002 mm Accuracy, Supplied in Case - Metav IndustryLine
Take advantage of precise diameter control, robust workshop design and compact handling for reliable in-process checks; order the gauge pin directly via Metav Werkzeuge or consult the team for application guidance. Gauge pin M323.I00 — Gauge pin, 18.00 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin intended for dimensional verification and fixture set-up in workshop environments, configured as a single item with a nominal diameter of 18.00 mm and a length of 50 mm. Workshop-grade design for daily use Diameter tolerance ±0.002 mm Compact 50 mm length for tight assemblies Made from special steel for wear resistance Precision where it counts for measurement and set-up The solid gauge pin delivers a tight tolerance of ±0.002 mm, providing a clear metrological basis for go/no‑go checks, bore verification and alignment tasks. The precise nominal diameter of 18.00 mm makes this pin suitable as a reference datum in fixtures and jigs where repeatability matters; the numerical tolerance supplies a verifiable figure for quality documentation. Compact dimensions reduce probe interference and simplify insertion into restricted bores, translating technical accuracy into dependable shop-floor results. Built for workshop efficiency and repeatable checks Designed as a workshop-grade item, this test pin combines a short 50 mm length with a robust cross section to limit bending and handling error during routine inspections. The construction from special steel ensures resistance to mechanical wear under frequent use, keeping the contact geometry stable over many cycles. For teams that require a reliable reference part for assembly validation or incoming inspection, the physical properties reduce rework and help maintain production flow without adding complexity to measurement routines. Straightforward handling for routine quality assurance Handling and visual inspection are uncomplicated: the single-item configuration and compact size allow fast positioning in gauges, fixtures or manual checks. The low mass contributes to easy manipulation while maintaining sufficient rigidity for accurate contact measurement. For documentation and traceability, the product identity is clear and stable, supporting quality records and process control. The combination of measurable tolerance, durable material and manageable form factor supports predictable measurement results in everyday workshop contexts. For application advice or to acquire the Metav IndustryLine gauge pin M323.I00, contact Metav Werkzeuge for precise recommendations by email or phone Technical Data Article number: M323.I00 SKU: M323.I00 GTIN: 4061905071010 eClass: 21170231 Label: Gauge pin, single, 18.00 mm length 50 mm Facts Diameter: 18.00 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Version: Workshop execution Item: Single unit Accuracy specification: ±0.002 mm FAQ What is the nominal diameter and tolerance of the gauge pin? The gauge pin has a nominal diameter of 18.00 mm with a tolerance of ±0.002 mm, specified for the Metav IndustryLine M323.I00. Which tasks is this pin suitable for? It is suitable for bore verification, fixture alignment and use as a reference datum during assembly and inspection processes. What material is the pin made from and is heat treatment specified? The pin is manufactured from special steel; no specific heat treatment or surface coating is stated in the product data. Can this pin be used in confined or tight-assembly checks? Yes, the compact 50 mm length and solid design make it well suited for checks in restricted bores and tight assemblies. How is repeatability ensured with this test pin? Repeatability is supported by the tight tolerance (±0.002 mm) and the robust workshop construction that minimises deformation during handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18,52mm Messstift, Länge 50mm, Werkstatt-Ausführung - Metav IndustryLine
Kompakte Kombination aus Präzision und robuster Werkstatt-Ausführung: Der Prüfstift liefert mit ±0,002 mm hohe Messsicherheit bei Endmaß‑Kontrollen und überzeugt durch die platzsparende Länge von 50 mm; bestellen Sie den Prüfstift direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Prüfstift, einzeln, 18,52 mm Länge 50 mm Der Prüfstift, einzeln, 18,52 mm Länge 50 mm ist ein kompakter Prüfbolzen für präzise Endmaß‑Kontrollen und eignet sich besonders für anspruchsvolle Werkstatt‑ und Fertigungsaufgaben. Werkstatt-Ausführung, robust und langlebig Spezial-Stahl für hohe Verschleißfestigkeit Präzision ±0,002 mm für zuverlässige Kontrolle Kompakte Länge 50 mm, platzsparend einsetzbar Lieferung in Kiste für sicheren Transport Hohe Materialqualität für langlebige Messungen Durch den Einsatz von Spezial-Stahl bietet der Prüfstift eine hohe Verschleißfestigkeit und sichere Oberflächeneigenschaften, die die Standzeit im täglichen Werkstattbetrieb erhöhen. Das kompakte Gewicht und die robuste Ausführung reduzieren das Risiko von Beschädigungen bei Handhabung und Einlagerung, sodass weniger Austauschzyklen anfallen und damit Laufzeitkosten gesenkt werden. Präzision, Messbereich und Einordnung für Feinmessung Mit einem Messbereich von 18,52 mm und einer spezifizierten Genauigkeit von ±0,002 mm wird die Komponente klar in die Mikro‑Kategorie (10–100 mm) eingeordnet, die sich für feinmechanische Arbeiten und Endmaß‑Prüfungen empfiehlt. Der Prüfstift ermöglicht reproduzierbare Ergebnisse bei der Kontrolle von Passungen und Bohrungsmaßen und ist damit ein zuverlässiges Werkzeug für anspruchsvolle Messaufgaben. Praktische Einsatzbereiche und Zielgruppen Der Prüfstift richtet sich an Werkstätten, Messlaboratorien und Qualitätssicherungsstellen, die robuste Prüfmittel für Serien‑ und Einzelprüfungen benötigen. Maschineneinrichter und Montagefachkräfte profitieren von der werkstattgerechten Bauart, während Fertigungsprüfer die hohe Präzision für schnelle Freigabemessungen nutzen können. Handhabung, Transport und Lieferumfang Die kompakte Länge von 50 mm und das geringe Gewicht von 0,15 kg erleichtern die Handhabung und das Einlegen in Prüfaufbauten. Die Lieferung erfolgt in einer Kiste (Kunststoff‑ oder Holzkiste), die sicheren Transport gewährleistet und Beschädigungen während der Logistik minimiert. So ist der Prüfstift sofort einsatzbereit und geschützt beim Versand. Für präzise Endmaß‑Kontrollen empfehlen wir den Prüfstift von Metav IndustryLine; bestellen Sie über Metav Werkzeuge oder kontaktieren Sie die Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: M323.I52 Marke: Metav IndustryLine Bezeichnung: Prüfstift, einzeln, 18,52 mm Länge 50 mm GTIN: 4061905449383 eClass: 21170231 Zahlen Messbereich: 18,52 mm Länge: 50 mm Gewicht: 0,15 kg Genauigkeit: ±0,002 mm Besonderheiten Material: Spezial-Stahl Werkstatt-Ausführung Verpackung: Lieferung in Kiste (Kunststoff- oder Holzkiste) SKU: M323.I52 FAQ Ist der Prüfstift für wiederholte Serienprüfungen geeignet? Der Prüfstift von Metav IndustryLine ist wegen der robusten Werkstatt-Ausführung und der Genauigkeit von ±0,002 mm gut für wiederholte Serienprüfungen geeignet und liefert konstante Ergebnisse bei Endmaß‑Kontrollen. Welche Vorteile bietet der Spezial-Stahl gegenüber Standardwerkstoffen? Spezial-Stahl beim Prüfstift erhöht die Verschleißfestigkeit und reduziert die Notwendigkeit häufiger Nachbearbeitungen, sodass Messzyklen länger stabil bleiben und die Betriebskosten sinken. Wie beeinflusst die kompakte Länge die Montage in Prüfaufbauten? Die Länge von 50 mm macht den Prüfstift sehr handlich und platzsparend, dadurch lässt er sich einfach in Prüfstände und Vorrichtungen integrieren, ohne zusätzliche Anpassungen an der Messumgebung. Wird der Prüfstift mit einer Schutzverpackung geliefert? Ja, der Prüfstift wird in einer Kiste geliefert, die für sicheren Transport sorgt und das Werkzeug beim Versand schützt. Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.01mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of a workshop‑rated gauge pin that combines precision and robust material for reliable fit checks and end‑measurements; with a nominal diameter of 18.01 mm and a compact 50 mm length this single gauge pin supports repeatable verification tasks — order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single, 18.01 mm, length 50 mm — Metav IndustryLine workshop version A gauge pin for accurate end‑measurement and fit testing in workshop and inspection applications Precision tolerance ±0.002 mm Diameter 18.01 mm nominal fit Length 50 mm workshop version Delivered in transport box Repeatable fit checks with workshop robustness A compact inspection pin designed for routine verification: the solid construction provides a stable datum for plug and hole testing while the tight tolerance of ±0.002 mm ensures measurements that reduce rework and production interruptions. The small form factor and manageable mass aid fast handling during batch checks, making the component suitable for repetitive verification tasks in assembly, jigs and maintenance operations. Durable construction for everyday use Manufactured from special steel, this workshop version is finished to withstand frequent use in industrial environments. The chosen material delivers a balance between wear resistance and machinability, so the pin preserves its diameter and running condition under normal workshop handling. Supplied as a single gauge pin with a 50 mm usable length, it is suited to inspection benches where tool resilience and straightforward replacement are priorities. Integrates into existing inspection routines The nominal 18.01 mm diameter corresponds to standard fit checkpoints, allowing simple substitution into existing gauge sets or fixtures without elaborate adaptation. Delivered in a transport box for secure handling, the item is straightforward to store and move between stations. Traceability is supported by the clear manufacturer and article identifiers included in the technical information, simplifying inventory management and calibration scheduling. Practical benefits that matter on the shop floor Beyond metrological performance, the workshop edition prioritises efficiency: rapid identification of out‑of‑tolerance conditions reduces downstream scrap and streamlines quality gates. The combination of precision and robust finish makes this pin an economical choice for technicians and inspectors who need dependable reference elements that perform day after day. Contact Metav Werkzeuge for availability and technical advice on Metav IndustryLine gauge pins: call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.I01 GTIN: 4061905071027 Brand: Metav IndustryLine Material: Special steel Facts Diameter: 18.01 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Workshop version Delivered in transport box for transport Category: Gauge pins / Messstifte FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.I01 is specified with a tolerance of ±0.002 mm, enabling fine verification work and repeatable fit checks. Is the pin suitable for use in jigs and fixtures? Yes, the workshop‑rated construction and the nominal 18.01 mm diameter make the pin appropriate for integration into fixtures, gauges and portable inspection tools. What material is used and how does it affect wear resistance? The pin is made from special steel, chosen to provide a good balance between hardness and serviceability for everyday workshop usage. How is the item delivered and stored? The gauge pin is supplied as a single item and delivered in a transport box to protect the datum and maintain condition during handling and storage. Does the product include calibration certificates? No calibration certificate is indicated in the product data; calibration status should be confirmed separately if a traceable certificate is required for metrological use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.03mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of the combination of workshop‑grade construction, narrow tolerance and compact geometry to ensure reproducible end‑measurements; order the part directly via Metav Werkzeuge or consult our specialists for application advice. M323.I03 Gauge pin — Ø 18.03 mm, 50 mm length (Metav IndustryLine) The M323.I03 gauge pin provides a compact, high‑precision reference for dimensional checks and end‑measurement tasks in workshop and production environments. Single gauge pin Ø 18.03 mm, 50 mm length Tolerance ±0.002 mm for precise checks Workshop‑grade special steel construction Supplied as an individual precision test pin Reliable dimensional control for repetitive checks The M323.I03 is designed for consistent size verification where repeatability matters. With a nominal diameter of Ø 18.03 mm and a tolerance of ±0.002 mm, this gauge pin enables fine dimensional discrimination in routine inspection tasks and assembly controls. The compact 50 mm length and single‑piece supply make it suitable for insertion, seating and comparative checks in fixtures and gauges. By converting a dimensional requirement into a simple, repeatable mechanical reference, the pin reduces measurement uncertainty and accelerates go/no‑go decisions in the workshop. Material choice and handling benefits Manufactured from special steel, the pin combines dimensional stability with wear resistance expected in frequent use. The material selection and workshop design minimise surface damage during handling and preserve the working diameter over many cycles. At 0.15 kg the pin is easy to position in jigs or test fixtures while remaining robust enough for everyday metrology tasks. These attributes support efficient inspection sequences and reduce the need for frequent rechecking, contributing to measurable time savings on repetitive operations. Integration into quality processes and traceability As a precision test pin, this item fits directly into established inspection flows and can serve as a reference for plug gauges, seating checks and end‑mass validation. Clear specification of Ø 18.03 mm and ±0.002 mm tolerance simplifies documentation and acceptance criteria for quality records. The compact form factor also permits easy storage and labelling alongside existing tooling. For applications requiring tailored measurement strategies, the Metav IndustryLine portfolio and advisory service help align the pin with fixtures and calibration intervals to maintain traceable, auditable results. Choose the Metav IndustryLine gauge pin for dependable workshop measurement and contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for technical guidance or a quotation Technical data Article number: M323.I03 GTIN: 4061905071041 Manufacturer: Metav IndustryLine Description: Gauge pin, single, Ø 18.03 mm, length 50 mm Core specifications Diameter: 18.03 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Materials and special features Material: Special steel Workshop version (Werkstatt‑Ausführung) Supplied individually eClass: 21170231 FAQ What accuracy can be expected from this gauge pin? The M323.I03 gauge pin is specified with a tolerance of ±0.002 mm, making it suitable for fine workshop checks and repeatable dimensional comparisons. Is the pin suitable for use in fixtures and jigs? Yes, the compact 50 mm length and single‑piece construction make the pin appropriate for seating in fixtures, test blocks and comparative gauges. What material is the gauge pin made from? The pin is produced from special steel, chosen for dimensional stability and wear resistance in routine inspection environments. Can this gauge pin be used for end‑measurement of shafts or bores? The M323.I03 is intended as a precision reference for end‑measurement tasks and can be used for checking bores and mating components where the specific nominal diameter applies. How should the pin be stored and handled to preserve accuracy? Store the pin in a clean, dry environment and avoid impact to the working diameter; regular visual inspection and controlled handling will help maintain the specified tolerance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.04mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Taking advantage of high repeatability, ±0.002 mm positional accuracy and a robust 50 mm working length ensures reliable end‑measure checks and reduced rework in fixture and gauge applications; order the gauge pin directly via Metav Werkzeuge or contact our consultants for technical advice. Gauge pin M323.I04 — 18.04 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin for precise end‑measure verification and fixture alignment, engineered for workshop conditions High accuracy ±0.002 mm Diameter exactly 18.04 mm 50 mm working length for fixture checks Workshop version with transport case Precision that reduces measurement uncertainty Manufactured for measurement tasks demanding repeatable results, this gauge pin combines a nominal diameter of 18.04 mm with a verified positional tolerance of ±0.002 mm, delivering a stable reference for end‑measure and alignment operations. The tight tolerance reduces the need for rework by improving the match between component and fixture dimensions; when used as a reference mandrel or plug, the pin minimises cumulative errors in assembly and inspection processes. The numerical specification provides a clear basis for process control and quality documentation. Built for workshop handling and repeatability The component is produced in special steel and configured as a workshop version, which balances surface fidelity and robustness for routine use. With a 50 mm usable length, the pin is long enough for many fixture and clamp checks while remaining easy to handle and position. Supplied in a protective transport case, the item arrives ready for storage and safe transfer between workstations, preserving calibration and surface condition. The construction supports stable seating in gauges and holders, reducing slippage and improving repeat measurements. Practical integration with inspection workflows Designed as a single inspection pin suitable for bench and fixture use, the item serves as a reference element in assembly checks, go/no‑go verification and end‑measure assessments. The simple geometry and standard diameter make it compatible with common gauges and holders; traceable identification via SKU M323.I04 and GTIN supports inventory and documentation routines. Metav IndustryLine’s distribution through Emmerich provides dependable availability and a quality filter for the European market, helping workshops and production lines access precision tools without excessive procurement overhead. For a reliable workshop reference choose the Metav IndustryLine gauge pin and contact Metav Werkzeuge for availability and application guidance at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: M323.I04 GTIN: 4061905071058 Manufacturer: Metav IndustryLine Facts Diameter: 18.04 mm Length: 50 mm Weight: 0.15 kg Accuracy: ±0.002 mm Special features Material: special steel Workshop version Supplied in protective transport case Category: gauge pins FAQ What level of accuracy can be expected from this gauge pin? The gauge pin M323.I04 offers an accuracy of ±0.002 mm, making it suitable for tight end‑measure and alignment checks in workshop environments. Is the pin delivered ready for use and how is it packaged? The single gauge pin is supplied in a protective transport case to preserve its surface and dimensional integrity during storage and transport. Which materials and applications is the pin intended for? Made from special steel, the pin is intended as a hard reference for fixture checks, plug‑type verifications and end‑measure assessments in general metalwork and assembly tasks. Can this pin be used with standard holders and gauges? Yes, the nominal 18.04 mm diameter and straight cylindrical form make the pin compatible with common holders and inspection fixtures; identification by SKU M323.I04 aids integration into inventory systems. Does Metav IndustryLine provide product traceability information? Traceability is supported via SKU and GTIN; for extended documentation requirements please request specific inspection or trace reports when ordering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.05mm Gauge Pin Length 50mm Workshop Version - Metav IndustryLine
Taking advantage of precise diameter control, robust material and secure transport packaging ensures reproducible end‑size checks and a longer service life; order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single — 18.05 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin designed for accurate end‑size verification and routine workshop checking, combining a defined diameter and hardened construction for consistent fit control. 18.05 mm precision diameter Tolerance ±0.002 mm accuracy Made from special steel Supplied in a protective case Reliable dimensional control for workshop routines The supplied gauge pin delivers repeatable measurements where exact fit and runout matter. With a diameter of 18.05 mm and a declared accuracy of ±0.002 mm, the pin provides a clear dimensional reference for go/no‑go checks, plug gauges and assembly verifications. In everyday machine‑shop and inspection tasks this level of precision reduces rework and speeds up quality decisions, offering a straightforward way to confirm bore and shaft fits without complex set‑ups. Material and finish engineered for longevity Manufactured from special steel and finished to workshop grade, the component resists surface wear and preserves its nominal size under frequent use. The 50 mm shaft length gives stable support during insertion, while the hardened surface maintains dimensional integrity over many cycles. Supplied in a protective case for transport, the pin arrives ready for secure storage and immediate deployment in assembly or inspection stations, reducing the risk of accidental damage during handling. Simple integration into quality workflows Identification and traceability are supported by the SKU and GTIN, enabling inventory control and quick reference in maintenance records. The compact geometry of the checking pin makes it suitable for bench tests, fixture set‑ups and rapid go/no‑go assessments in production. When incorporated into standard inspection routines, the pin helps maintain a documented chain of measurement decisions and supports consistent part interchangeability across batches. For workshop‑grade precision from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for ordering and technical clarification via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M323.I05 GTIN: 4061905071645 SKU: M323.I05 Data Diameter: 18.05 mm Length: 50 mm Weight: 0.15 kg Accuracy: ±0.002 mm Special features Material: Special steel Workshop version Supplied in protective case Category: Gauge pins (Messstifte) FAQ What materials is the pin suitable for checking? The gauge pin from Metav IndustryLine is intended as a dimensional reference and is suitable for checking fits in common engineering materials; the component itself is made from special steel for durability. How is the declared accuracy verified? Accuracy of ±0.002 mm is a manufacturing specification for the gauge pin and can be referenced against internal quality records or the supplier's conformity information for dimensional tolerances. Is the pin ready for immediate use upon delivery? Yes, the gauge pin arrives as a single, workshop‑grade checking tool in a protective case, ready for insertion into inspection and assembly routines. Can this pin be used for go/no‑go checks on shafts and bores? The 18.05 mm diameter and stable 50 mm length make the pin well suited for go/no‑go assessments and quick fit verifications in production and maintenance environments. How is the product identified for stock and traceability? The item is listed under SKU M323.I05 and GTIN 4061905071645 for straightforward inventory tracking and documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.06mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of workshop-grade robustness and ±0.002 mm accuracy combined with a compact 50 mm length for reliable end‑size verification; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.I06 — single gauge pin, Ø 18.06 mm, 50 mm length (Metav IndustryLine) The Gauge pin M323.I06 is a workshop‑grade precision pin designed for end‑size checks, locating and go/no‑go applications in inspection, jigging and fixture set‑ups. Workshop-grade, hardened special steel Diameter 18.06 mm, precision ±0.002 mm Length 50 mm for stable locating Accuracy that reduces inspection uncertainty A compact precision pin with a nominal diameter of 18.06 mm and a verified tolerance of ±0.002 mm, this gauge component reduces measurement uncertainty in repetitive checks. The tight tolerance aligns with fine inspection tasks where small deviations lead to costly rework; by applying a defined reference datum with the pin, batch sampling and final inspection cycles become faster and more conclusive. In practice, smaller corrective actions can be implemented earlier in the process, improving throughput and lowering scrap rates. Built for workshop use and repeatable locating Delivered in a workshop‑grade design and manufactured from special steel, this single gauge pin withstands routine handling and positioning without compromising roundness or straightness. The 50 mm shank length offers a stable bearing surface in vices, fixtures or go/no‑go housings, enabling repeatable positioning in assembly and tooling tasks. For toolmakers and maintenance engineers the practical advantage is clear: consistent locating reduces set‑up time and increases the reproducibility of subsequent machining or testing steps. Practical handling and integration in inspection workflows The pin’s compact geometry and robust construction make it straightforward to integrate into existing jigs and gauges. Where end‑measure verification is required, the component functions as a precise reference for pass/fail decisions and alignment operations. The modest mass and balanced dimensions mean it can be manipulated easily during batch inspection or fitted into specialised fixtures without adding significant inertia. This simplicity supports lean workflows and keeps calibration routines efficient. For workshop-ready traceability and reliable end‑size verification, contact Metav Werkzeuge in Emmerich to discuss the M323.I06 gauge pin, availability and suitable delivery options Technical data SKU: M323.I06 GTIN: 4061905071652 Label: Gauge pin, single, 18.06 mm, length 50 mm Facts Diameter: 18.06 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.15 kg eClass: 21170231 Special features Workshop execution Material: Special steel Intended for end‑size verification, locating and go/no‑go applications FAQ What is the nominal diameter and tolerance of this pin? The gauge pin has a nominal diameter of 18.06 mm and a declared tolerance of ±0.002 mm for high‑precision end‑measure checks. Is this pin suitable for fixture and jig locating? Yes; the M323.I06 is a workshop‑grade single gauge pin designed specifically for locating and fixture integration where consistent datum reference is required. What material is used and how does it affect durability? Manufactured from special steel, the pin combines wear resistance with dimensional stability to withstand routine handling and maintain roundness over prolonged use. Can the pin be used for final inspection and go/no‑go tests? The pin is intended for end‑size verification and can serve as a reliable reference in go/no‑go assemblies and final inspection procedures. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.07mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Compact workshop gauge pin in special steel with ±0.002 mm accuracy ensures repeatable inspection results; order the gauge pin directly via Metav Werkzeuge or contact our consultants for tailored advice. Gauge pin, single — 18.07 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin, single 18.07 mm, 50 mm is a workshop-grade precision pin for bore checking, alignment and end-measure verifications in fine mechanical and production settings. Workshop‑grade construction Special steel for wear resistance Tolerance ±0.002 mm 18.07 mm diameter, 50 mm length Precision that supports reliable in‑line inspection Engineered for routine verification tasks, this gauge pin delivers a measurable benefit where consistency matters. The ±0.002 mm tolerance class positions the pin for tasks that require very fine repeatability; this level of accuracy reduces uncertainty during go/no‑go checks and ensures reproducible dimension control across batches. The compact geometry and hardened surface provide dimensional stability during handling, so results remain consistent between operators. Measurable performance like this translates directly into reduced rework and fewer stoppages on the production line. Robust material and design for everyday workshop use Constructed from special steel, the pin combines surface hardness with resistance to wear—an advantage when used frequently in jigs, fixtures and gauge stacks. The 50 mm length and 18.07 mm diameter form a compact reference that is easy to seat in bores and locating features while maintaining rigidity. The workshop specification means the component tolerates regular handling and quick checks without complex maintenance. Where floor-level reliability and fast throughput are priorities, the robust construction supports efficient quality workflows and long service life. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine gauge pin M323.I07 can be integrated into existing inspection routines and to request product-specific recommendations. Technical data SKU: M323.I07 GTIN: 4061905071669 Label: Gauge pin, single, 18.07 mm, length 50 mm Facts Diameter: 18.07 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop‑grade design Category: Gauge pins Single component for end‑measure and alignment checks FAQ What materials is this gauge pin suitable for when checking fitted components? The gauge pin is a gauge pin, single 18.07 mm, 50 mm made from special steel and is intended for dimensional checks of bores and locating features across common engineering materials. How precise is the pin for routine inspection? The pin offers a tolerance of ±0.002 mm, making it suitable for fine repeatability checks and verification tasks where tight dimensional control is required. Can the pin be used as a reference for alignment in assembly jigs? Yes, the compact 50 mm length and rigid diameter make the pin appropriate as a locating and alignment reference in jigs and fixtures for small to medium assemblies. Is any calibration certificate supplied with the product? No calibration certificate is specified with this item by default. If a calibrated instrument is required, please contact Metav Werkzeuge to discuss available calibration options. How should the gauge pin be maintained to preserve accuracy? Clean the pin after use, protect it from corrosive environments, and store it in a suitable protective tray to prevent nicks and wear that could affect dimensional performance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.08mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of high repeatability ±0.002 mm, a precise 18.08 mm diameter and robust special steel, delivered as a single workshop reference pin in a transport case for safe handling; order the gauging pin directly via Metav Werkzeuge or consult our product specialists for integration advice. Gauging pin M323.I08 — single workshop reference pin, 18.08 mm Ø, 50 mm length (Metav IndustryLine) The gauging pin M323.I08 is a single, workshop-grade reference pin designed for final dimension checks and fixture set-up in fine mechanical and metalworking environments. Diameter precisely 18.08 mm High accuracy ±0.002 mm Special steel construction Delivered in transport case Precision that reduces rework and secures quality The 18.08 mm reference diameter with an accuracy of ±0.002 mm provides a reliable basis for end-dimension verification in serial inspection and setup tasks. Manufactured from special steel, the pin maintains geometric stability under repeated use and resists deformation during handling. As a result, measurement routines become more reproducible and scrap rates are reduced, supporting efficient quality control and consistent production output. Workshop-ready design for dependable handling Prepared as a workshop version, the pin is built to withstand frequent use during set-up and verification cycles. At 50 mm length and weighing approximately 0.15 kg, the component balances rigidity with manoeuvrability for bench and fixture work. Delivery in a transport case ensures secure handling and protects the gauge during storage and transit, reducing the risk of accidental damage that would otherwise compromise measurement integrity. Practical integration into inspection and assembly workflows As a compact reference pin, the component suits micro-range inspection tasks where short, stiff measuring elements are essential. Its dimensions and repeatable tolerance make it suitable for final checks on small machined parts, gauges and assemblies typical in precision engineering. The simple geometry allows fast visual sorting and direct integration into existing fixture points or go/no-go checking routines, contributing to faster setup times and reliable conformity assessments. Request the Metav IndustryLine gauging pin via Metav Werkzeuge for dependable end-dimension control and secure transport — Metav Werkzeuge is available to advise on specification matching and delivery from Emmerich. Technical Data Article number: M323.I08 SKU: M323.I08 GTIN: 4061905071676 Brand: Metav IndustryLine Material: Special steel Facts Diameter: 18.08 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.15 kg Special features Workshop version Single gauging pin Transport case included for protection End-dimension reference for fine mechanical work FAQ What tolerance is the gauging pin produced to? The gauging pin M323.I08 is manufactured to a tolerance of ±0.002 mm, suitable for high-repeatability reference measurements. What material is used for the pin? This reference pin is made from special steel, selected for dimensional stability and wear resistance in workshop conditions. Which applications suit this reference pin? Designed for end-dimension checks, the pin is ideal for fine mechanical parts, fixture set-up and final inspections within the micro measurement range. Is a transport case supplied with the pin? Yes, the product is supplied in a transport case (plastic or wooden variant) to protect the gauge during handling and transport. Can the pin be integrated into fixture and go/no-go checks? The geometry of the reference pin allows direct use as a go/no-go reference or as a locating element in fixtures for rapid conformity checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.09mm Test Pin, 50mm Length, Workshop Version, Special Steel in Plastic Case - Metav IndustryLine
Compact workshop test pin combining a precise Ø 18.09 mm nominal diameter with a tight manufacturing tolerance of ±0.002 mm and a practical 50 mm shaft length; supplied in a protective transport case for safe handling. Order directly via Metav Werkzeuge or contact our consultants for specification advice. Gauge pin M323.I09 — Test gauge pin Ø 18.09 mm, 50 mm length (Metav IndustryLine) A gauge pin M323.I09 engineered for end‑dimension verification and go/no‑go checks in workshop and quality‑control applications. Precision ground Ø 18.09 mm Tight manufacturing tolerance ±0.002 mm Workshop version, robust finish Supplied in transport case Accurate measurement where it matters The M323.I09 is designed to deliver repeatable checks for end dimensions and fit verifications. With a nominal diameter of 18.09 mm and a documented manufacturing deviation of ±0.002 mm, the pin provides the dimensional reliability required for assembly gauges and final inspection routines. The short 50 mm shaft offers stability during insertion, reducing the influence of lateral play and improving measurement consistency in routine quality checks. Robust material and industrial finish Manufactured from special steel, this test pin combines wear resistance with dimensional stability under typical workshop conditions. The material choice supports frequent handling and contact with mating components without rapid degradation of the measurement surface. The workshop version finish prioritises durability and straightforward maintenance, ensuring the gauge retains its functional geometry through regular use. Practical handling and storage Supplied as a single item and delivered in a protective transport case, the pin is ready for immediate use on the shop floor and simple to store safely between tasks. The compact weight (approx. 0.15 kg) and straight‑forward geometry make the pin easy to integrate into fixture checks or use as a reference in visual inspection benches. Its configuration suits repetitive go/no‑go tasks where fast, reliable feedback shortens inspection cycles and supports production throughput. Proven partner for everyday precision Part of the Metav IndustryLine range, this test pin reflects the brand’s focus on making high precision tools accessible to workshops and small production environments. Combining a clear tolerance specification with a robust construction supports decision‑making in procurement and ensures compatibility with standard inspection practices. The straightforward design reduces the need for complex training and helps maintain quality standards across routine operations. Contact Metav Werkzeuge for procurement guidance or to discuss suitability of the M323.I09 for specific inspection tasks — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert support Technical Data Article number: M323.I09 GTIN: 4061905449345 Label: Gauge pin, single, 18.09 mm Ø, 50 mm length Manufacturer: Metav IndustryLine Facts Diameter: 18.09 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Special features Material: Special steel Workshop version Supplied in transport case Single gauge pin, individual item FAQ What is the nominal diameter and tolerance of the test pin? The M323.I09 gauge pin has a nominal diameter of 18.09 mm and a manufacturing tolerance of ±0.002 mm. Is the pin supplied as a single item or in sets? This article is supplied as a single gauge pin; the product description specifies a single item delivery. What material is used for the pin? The test pin is made from special steel, chosen for wear resistance and dimensional stability in workshop use. Is a calibration certificate included with the M323.I09? Calibration information is not specified in the product data; a calibration certificate is not listed as included. Which applications suit this gauge pin best? The pin is suitable for end‑dimension verification, go/no‑go checks and assembly fit inspections in workshop and production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.11mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of precise repeatability and robust special-steel construction combined with a compact form factor for dependable workshop measurement. The tight ±0.002 mm tolerance and 50 mm length ensure consistent final-dimension checks; order the gauge pin directly via Metav Werkzeuge or ask our consultants if further specification advice is required. Gauge pin M323.I11 — 18.11 mm Ø, 50 mm length (Metav IndustryLine) The Gauge pin M323.I11 is a single inspection pin designed for exact final-dimension checks and fixture alignment in workshop and inspection environments. Workshop-grade construction Nominal diameter 18.11 mm Tolerance ±0.002 mm Overall length 50 mm Supplied in transport case Stabilise quality control with micromeasurement certainty The inspection pin delivers a nominal diameter of 18.11 mm with a manufacturing tolerance of ±0.002 mm, providing a stable reference for pass/fail checks and jig verification. Manufactured from special steel, the component resists wear during repeated seating operations and maintains roundness under normal use. Such a narrow tolerance is particularly valuable where consistent repeatability reduces rework and inspection time — a rational improvement to production throughput that supports tighter process control. Compact format ideal for precise workshop and toolroom tasks Classified within the micro measurement range, this compact gauge pin combines accessibility with stiffness: its 50 mm overall length provides enough reach for small assemblies while remaining easy to handle and align. The small footprint suits fine mechanical work and fixture set-up where larger gauges would compromise control. In practical terms, the geometry reduces the chance of bending or misalignment during handling, translating technical precision into everyday reliability at the bench. Durable handling and transport for repeatable use The pin’s material choice and workshop specification mean long service life under typical inspection cycles. Supplied in a protective transport case, the gauge arrives ready for safe storage and movement between stations, keeping the measuring surface free from damage and contamination. Lightweight yet robust, the component integrates well into existing inspection kits and complements other reference standards in the shop without adding unnecessary complexity. For reliable workshop repeatability and consistent inspection results, contact Metav Werkzeuge to discuss the M323.I11 gauge pin and to arrange supply from our Emmerich facility Technical data Article number: M323.I11 GTIN: 4061905449253 Weight: 0.15 kg Core dimensions Nominal diameter: 18.11 mm Length overall: 50 mm Tolerance: ±0.002 mm Materials & special features Material: Special steel Workshop version Supplied in transport case FAQ What tolerance does the gauge pin offer? The gauge pin M323.I11 is manufactured to a tolerance of ±0.002 mm, suitable for tight workshop and inspection tolerance requirements. Is the pin suitable for fixture alignment in toolrooms? Yes, the Metav IndustryLine gauge pin M323.I11 (pin gauge) is intended for final-dimension checks and fixture alignment in workshop and toolroom applications. How is the gauge pin delivered and protected? Delivery of the M323.I11 includes a protective transport case to safeguard the measurement surfaces during storage and movement. Which material is used for the gauge pin? The inspection pin is made from special steel, specified for wear resistance and stable dimensional properties under routine use. Does the size classify as a micro-range instrument? With a nominal diameter of 18.11 mm and a compact length, the pin falls into the micro measurement range, balancing precision and ease of handling for small parts inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.12mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Benefit from a precise 18.12 mm diameter combined with a tight ±0.002 mm tolerance and a 50 mm length that supports stable gauge checks; order the test pin directly via Metav Werkzeuge or consult our specialists for application advice. Test pin M323.I12 — 18.12 mm measuring diameter, 50 mm length (Metav IndustryLine) Test pin M323.I12 for end‑measurements and gauge inspections in workshop metrology and production control Precision tolerance ±0.002 mm Diameter 18.12 mm for gauge testing 50 mm length for stable handling Workshop version for robust use Transport case included for safe transport Consistent geometry for repeatable inspection results The supplied gauge pin is manufactured to a defined geometry that reduces interpretation error during manual inspection. With a nominal diameter of 18.12 mm and a verified clearance class, the component is suited to plug‑type checks, reference stacks and fixture validation where repeatability matters. The workshop design reduces the risk of accidental deformation in daily use, supporting consistent contact conditions and reliable pass/fail decisions in routine quality control. High accuracy and material properties that support traceable measures Built from special steel and finished for stable dimensions, the pin offers a verified ±0.002 mm dimensional accuracy which places it in the precision range for fine inspection tasks. This accuracy ensures measurable differences are attributable to the workpiece rather than the measuring element. The material selection provides wear resistance appropriate for frequent engagement with mating gauges; together with its compact 50 mm length, this makes the pin an economical tool for repeat verifications and reference comparisons in small‑part production. Practical handling, protection and workshop suitability Weighing approximately 0.15 kg, the pin is easy to position by hand or locate within small fixtures. The transport case supplied with this article protects the pin between uses and during transfer, reducing handling damage and contamination. The combination of a robust workshop finish and secure packaging supports long service intervals and reduces downtime for replacement. The product’s compact form factor also simplifies storage in instrument cabinets or inspection sets. For tailored advice or to secure the M323.I12 test pin from Metav Werkzeuge, contact our specialists in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: M323.I12 GTIN: 4061905449260 Manufacturer: Metav IndustryLine Dimensions & tolerances Diameter: 18.12 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Materials & special features Material: special steel Version: workshop execution Packaging: transport case included Category: measuring pins FAQ What accuracy can be expected from this test pin? The test pin M323.I12 is specified with an accuracy of ±0.002 mm, suitable for precise workshop inspections and repeat checks. Is the pin suitable for frequent use in a production environment? Yes, the workshop execution and special steel construction of the M323.I12 make it suitable for regular use in production and inspection workflows. Does the delivery include protective packaging? Delivery of the M323.I12 includes a transport case to protect the measuring surface during storage and transit. For which applications is this measuring pin intended? The M323.I12 is intended for end‑measurements, plug‑type gauge checks and fixture verification in workshop metrology and small‑part production. How can Metav IndustryLine items be ordered or queried? For ordering or technical queries about the M323.I12 and other Metav IndustryLine products, contact Metav Werkzeuge via the provided email or telephone number Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.13mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of workshop-grade robustness combined with tight tolerance and simple handling for dependable end‑size inspection; order directly via Metav Werkzeuge or consult the specialists for application advice. Gauge pin, single — Ø 18.13 mm, length 50 mm (Metav IndustryLine) A Gauge pin, single engineered for precise end‑size verification in workshop metrology and production control. Workshop version for everyday use Diameter 18.13 mm with tight tolerance Length 50 mm compact profile Tolerance ±0.002 mm Reliable end‑size control for production checks The compact gauge pin is made for repeatable end‑size inspection where consistent fit checks and go/no‑go verification are required. With a declared tolerance of ±0.002 mm, the pin reduces ambiguity in acceptance criteria and supports rapid decision making on component conformity. The workshop execution balances dimensional accuracy with handling robustness, making this test pin suited to frequent use in assembly, incoming inspection and jig checks. Its nominal diameter of 18.13 mm provides a clear reference for bore and shaft mating checks. Measurable precision that supports process reliability A short, rigid design with a 50 mm length gives a good stiffness-to-reach ratio for typical workshop tasks; the unit weight of 0.15 kg ensures a stable feel without being cumbersome. The item is manufactured from special steel, offering stable geometry under normal workshop conditions. Numeric specification and simple form factor streamline integration into measurement routines and reduce operator variability during end‑size evaluation. The compact format also helps maintain traceability and storage discipline in lean production environments. Practical handling and workshop integration Delivered as a single unit in a transport case, the pin is ready for secure storage and simple removal when checks are needed; the protective packaging supports safe transport between bench and machine. The workshop design and single‑piece format facilitate fast, low‑effort checks during set‑ups, assembly and maintenance tasks. For bespoke test jigs or paired measurements, the pin’s standardised diameter and tight tolerance simplify substitution and documentation within quality records. For further details on suitability for a specific application, Metav Werkzeuge staff can provide technical guidance and matching items. Choose the Metav IndustryLine gauge pin for dependable end‑size verification and contact Metav Werkzeuge in Emmerich for ordering or technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M323.I13 GTIN: 4061905449277 Brand: Metav IndustryLine Label: Prüfstift, einzeln, 18,13 mm Länge 50 mm Core figures Diameter: 18.13 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Design and special features Material: Special steel Version: Workshop execution Delivery: single pin in transport case Application hint: End‑size checking / go/no‑go verification FAQ What is the exact diameter and tolerance of the pin? The pin has a diameter of 18.13 mm and is specified with a tolerance of ±0.002 mm for reliable end‑size checks. Is this item supplied ready for use or does it require calibration? The Metav IndustryLine test pin is supplied as a ready‑to‑use workshop item; standard delivery includes the pin in a transport case but does not indicate special calibration certificates. Which materials and applications is the pin intended for? Made from special steel, the pin is intended for general workshop metrology tasks such as bore checks, assembly verification and go/no‑go fit tests. How should the pin be stored to maintain accuracy? Store the pin in its transport case in a dry, stable environment; avoid mechanical shocks and contamination to preserve the dimensional integrity of the pin. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.14mm Gauge Pin Single 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of high repeatability, compact dimensions and robust workshop design for reliable end‑measure verification; order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.I14 — 18.14 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin M323.I14 designed for precise go/no‑go checks, end‑measure verification and routine inspection tasks in workshop and production environments Workshop version, robust construction Diameter 18.14 mm with ±0.002 mm tolerance 50 mm overall length, special steel construction Delivered in protective transport case Consistent fit for fast, repeatable inspection The pin provides a precise nominal diameter of 18.14 mm with a certified tolerance of ±0.002 mm, making it suitable for tight fit checks and final dimension verification. As a hardened, single gauge element, it functions as a quick go/no‑go reference or a master plug for end‑measure testing; this reduces the need for prolonged setup and helps avoid production stoppages caused by uncertain fits. The compact design supports rapid handling and short cycle inspection where time efficiency is essential. Built for workshop durability and easy handling Constructed from special steel, the component offers a balance of dimensional stability and wear resistance appropriate for frequent use in workshop settings. The 50 mm length gives sufficient engagement for reliable seating while remaining easy to position by hand or with simple fixtures. The workshop version implies a design focus on robustness rather than delicate laboratory handling, while the supplied protective transport case ensures the pin arrives undamaged and remains protected between uses, preserving measurement integrity over time. Integrates into inspection routines and reduces uncertainty As a single gauge pin, the item supports rapid verification of bores, gauges and assemblies during in‑process checks or final inspection. Use as an end‑measure reference shortens decision cycles: a clear pass/fail result from a known 18.14 mm master helps prevent rework and streamlines quality control documentation. Lightweight and simple to use, the pin complements tactile inspection workflows and can be combined with more advanced metrology tools when traceable or statistical measurement is required. Contact Metav Werkzeuge today to discuss how the M323.I14 gauge pin from Metav IndustryLine can improve inspection speed and repeatability in your workshop; our Emmerich team is available for technical guidance and order fulfilment Technical data Article number: M323.I14 GTIN: 4061905449284 Material: Special steel Diameter: 18.14 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Numeric specifications Diameter: 18.14 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg GTIN: 4061905449284 Features / Special properties Workshop version Delivered in protective transport case Single gauge pin Category: Gauge pins SKU: M323.I14 Manufacturer: Metav IndustryLine FAQ What is the nominal size and tolerance of this gauge pin? The gauge pin has a nominal diameter of 18.14 mm with a tolerance of ±0.002 mm, suitable for tight fit and end‑measure checks. Is the pin suitable for regular workshop use? Yes — the workshop version is designed for frequent handling and the special steel construction provides practical durability for routine inspection tasks. How is the gauge pin supplied and protected in transit? The pin is supplied as a single unit and is delivered in a protective transport case to prevent damage during shipping and storage. Can this pin be used as an end‑measure reference for assembly fixtures? The M323.I14 gauge pin is intended for go/no‑go and end‑measure verification and can be used as a quick reference in fixture setup and final checks. What documentation identifies the product for ordering and traceability? Use SKU M323.I14 and GTIN 4061905449284 when ordering; these identifiers match the Metav IndustryLine catalogue entry. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.15mm Gauge Pin Single 50mm Length Workshop Version - Metav IndustryLine
Taking advantage of precise 18.15 mm diameter and ±0.002 mm accuracy, this single gauge pin ensures reliable end‑size checks and repeatable set‑ups in workshop inspection routines. Supplied ready for use and delivered in a protective transport case, order directly via Metav Werkzeuge or consult our specialists for application advice. Single gauge pin M323.I15 — 18.15 mm diameter, 50 mm length (Metav IndustryLine) A single gauge pin 18.15 mm designed for precise end‑size measurement and fixture alignment in inspection, toolmaking and quality control applications. High accuracy ±0.002 mm Diameter 18.15 mm for end‑size checks 50 mm length for secure fixture insertion Robust accuracy for routine inspection The solid construction of this workshop‑grade gauge pin delivers repeatable measurements where small deviations matter. With a declared tolerance of ±0.002 mm, the component provides a reliable, measurable reference for end‑size verification and plug‑gauge substitution in everyday shop use. The compact design and balanced mass reduce handling variability, so setup time is minimised and process stability improves. Material choice that supports wear resistance Manufactured from special steel, the pin combines surface hardness with dimensional stability to withstand regular use in busy production environments. The material choice reduces flank wear and preserves the calibrated diameter over extended cycles, helping to maintain traceability of inspection results without frequent replacement. Practical dimensions for fixture and gauge stations At 18.15 mm diameter and 50 mm length, the pin is long enough to engage fixtures securely while remaining compact for dense gauge stacks. The length provides sufficient insertion depth to eliminate play in many clamping and checking arrangements, supporting consistent seating and straightforward integration into existing jigs and test benches. Ready for the workshop — single piece delivery Supplied as a single test pin, the item is tailored for targeted replacement or for use as a master reference in assembly and inspection tasks. Delivered in a protective transport case, the pin arrives ready for immediate incorporation into inspection benches, minimise handling damage and preserve the reference surface during transit. For targeted precision in end‑size inspection, request the M323.I15 from Metav Werkzeuge — our Emmerich team provides product selection support and practical advice for integrating this gauge pin into existing inspection processes Technical data SKU: M323.I15 GTIN: 4061905449291 Designation: Single gauge pin, 18.15 mm diameter, 50 mm length Facts Diameter: 18.15 mm Length: 50 mm Weight: 0.15 kg Accuracy: ±0.002 mm Special features Workshop version Material: special steel Supplied as single test pin Delivered in a protective transport case Intended use: end‑size checks, fixture alignment, inspection FAQ What tolerance can be expected from this gauge pin? The gauge pin is manufactured to an accuracy of ±0.002 mm, making the M323.I15 suitable for precise end‑size verification in workshop environments. Is the pin suitable for heavy‑duty shop use? Yes. The workshop‑grade construction and special steel material used for the M323.I15 support regular handling and frequent insertion into fixtures. Can this pin replace a worn plug gauge for quick checks? The single gauge pin offers a stable reference for quick plug‑type checks and fixture set‑ups; it is supplied as a standalone test pin for targeted replacement or use in gauge stacks. How should the gauge pin be stored to maintain accuracy? Store the M323.I15 in its protective transport case when not in use and avoid contact with abrasive or corrosive substances to preserve the reference diameter. Which tasks is the pin primarily designed for? This measurement pin is intended for end‑size checks, fixture alignment and other inspection tasks where a fixed diameter reference is required in the workshop. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.16mm Gauge Pin Length 50mm Workshop Version - Metav IndustryLine
The combination of compact dimensions, workshop-grade material and a tight ±0.002 mm tolerance makes this test pin an efficient choice for repeatable fit checks and end‑measurement tasks; its 18.16 mm diameter and 50 mm length provide a stable reference in inspection jigs. Order it directly via Metav Werkzeuge or consult our specialists for application guidance. Gauge pin, single, 18.16 mm Ø × 50 mm — Metav IndustryLine Gauge pin, single, 18.16 mm Ø × 50 mm is a precision measurement pin for workshop inspection and dimensional verification in production and assembly environments Workshop-grade precision ±0.002 mm Diameter 18.16 mm for accurate fits 50 mm hardened special-steel body Delivered in protective transport case Stable reference for routine fit and end‑measurements The M323.I16 gauge pin serves as a compact, repeatable reference for checking bore clearances, seating depths and assembly fits. Classified in the micro class (10–100 mm), this size range balances reach and stiffness for handheld inspection and fixture use. With a declared tolerance of ±0.002 mm, the pin supports reliable go/no‑go assessments and reduces the need for iterative adjustments, helping to maintain a steady production flow and lower scrap rates. Durable construction for workshop conditions Manufactured from special steel and specified as a workshop version, the pin withstands regular handling in engineering and maintenance settings. The hardened body keeps the gauge resistant to wear, preserving dimensional integrity over repeated use. Supplied in a protective transport case, the item is ready for shop-floor deployment and retains its calibrated geometry during storage and transit, which contributes to consistent measurement outcomes and longer service life. Practical handling and integration into inspection routines Compact dimensions and a moderate mass make the pin straightforward to position by hand or within a fixture; the nominal 50 mm length provides useful engagement without excess overhang. Its form factor simplifies insertion into jigs and test stacks while the precise diameter ensures consistent seating. Use in combination with bench comparators or simple visual checks to verify component interfaces quickly, thereby improving throughput and measurement traceability in day‑to‑day quality control. For workshop-ready precision from Metav IndustryLine, request the M323.I16 gauge pin via Metav Werkzeuge — our Emmerich team can advise on suitability and delivery options Technical data Article number: M323.I16 GTIN: 4061905449307 Category: Messstifte Facts Diameter: 18.16 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Version: workshop execution Delivered in protective transport case ECLASS: 21170231 FAQ What is the intended use for this gauge pin? The gauge pin M323.I16 is intended for fit checks, end‑measurements and fixture verification in workshop and production environments. How precise is the diameter control on this pin? Diameter control is specified at ±0.002 mm, providing a high level of repeatability suitable for routine inspection tasks. Is the pin supplied ready for immediate use? Yes, the gauge pin is delivered protected in a transport case and ready for integration into inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.17mm Gauge Pin Length 50mm Workshop Finish - Metav IndustryLine
For reliable end‑measure verification, choose the single gauge pin with a precise Ø 18.17 mm diameter and 50 mm length, machined to a tight ±0.002 mm tolerance and made from durable special steel. Order the part via Metav Werkzeuge for consistent inspection throughput or consult the Metav team for specification support. Gauge pin M323.I17 — Single precision probe, Ø 18.17 mm × 50 mm (Metav IndustryLine) The gauge pin M323.I17 is a compact end‑measure probe intended for accurate go/no‑go checks, fixture set‑up and calibration tasks in workshop and inspection environments. Precision ground Ø 18.17 mm, tolerance ±0.002 Workshop version with robust finish Made from special steel for wear resistance Reliable, repeatable checking to speed up quality control The precision‑ground gauge pin delivers a reproducible reference for end‑measure tasks, reducing setup time and minimising rework. With a nominal Ø 18.17 mm and a declared ±0.002 mm form tolerance, this probe is suitable for micro‑accurate pass/fail verification and alignment operations where dimensional certainty shortens inspection cycles. The compact 50 mm length keeps handling straightforward while providing sufficient engagement for fixture locating; the combination of geometry and finish translates directly into measured time savings on the shop floor. Durable material and workshop design for everyday use Manufactured from special steel, the pin offers enhanced wear resistance compared with untreated alternatives, supporting consistent performance under repeated contact and light loading. The workshop version finish resists surface damage during handling and reduces fretting at seating points. This robustness preserves the ±0.002 mm performance window over many inspection cycles, so maintenance intervals are extended and replacement frequency is reduced — a practical economy for busy production and assembly environments. Compact handling that integrates with fixtures and gauges At a weight of 0.15 kg and a slender profile, the probe is easy to seat into locating bores or gauge blocks and to transport between measurement stations. The geometry suits fixture set‑up, go/no‑go plugs and end‑measure arrays where space is limited but precision remains essential. Because the item is a single, precision‑machined pin, it integrates cleanly into modular inspection kits and replacement schedules, supporting predictable stocking and straightforward inventory control for quality departments. Specify the Metav IndustryLine gauge pin for precise end‑measurement tasks — contact Metav Werkzeuge in Emmerich for advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.I17 GTIN: 4061905449314 Category: Messstifte Brand: Metav IndustryLine Facts Diameter: 18.17 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Precision ground finish Workshop version for robust use Single gauge pin for end‑measure applications Material: special steel FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.I17 is specified with a ±0.002 mm tolerance, suitable for fine inspection and go/no‑go verification. Which material is the pin made from? This probe is manufactured from special steel, selected for its wear resistance and stable surface finish. Is the pin suitable for fixture locating and alignment? Yes, the slender 50 mm length and precision ground diameter make the pin well suited to fixture locating, alignment and modular gauge sets. How is the item identified for ordering? Order using the SKU M323.I17; the product is also listed under GTIN 4061905449314 for catalogue and procurement systems. What kind of applications is this probe designed for? Designed for workshop inspection, go/no‑go checks and end‑measure verifications where a compact, high‑precision reference pin is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.18 mm Gauge Pin Length 50 mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of workshop-grade robustness, exact 18.18 mm sizing and a tight ±0.002 mm tolerance to secure repeatable end-measure checks; order the gauge pin directly via Metav Werkzeuge or consult Metav’s specialists for application advice. Gauge pin M323.I18 — single inspection pin, 18.18 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin M323.I18 is a workshop-grade inspection pin designed for precise end‑measure verification and bore checking in production and maintenance environments. Single precision gauge pin 18.18 mm diameter Length 50 mm for standard inspection setups Special steel construction for wear resistance Workshop-grade design for everyday industrial use Reliable, repeatable checks with minimal setup The M323.I18 functions as a straightforward, single-piece inspection tool for manufacturers and workshop technicians who require fast, repeatable checks of bore diameters and end measures. Ground to a fixed diameter of 18.18 mm, the pin delivers a consistent reference that simplifies go/no‑go decisions on the shop floor. The specified ±0.002 mm tolerance ensures that the pin meets tight measurement criteria, reducing the need for time‑consuming secondary checks and supporting efficient quality workflows. Built to withstand routine use while preserving accuracy Constructed from special steel, the pin resists wear under repeated insertion and handling, which preserves dimensional integrity over many cycles. The 50 mm length offers a practical engagement depth for common inspection tasks without excess overhang, keeping handling comfortable and improving alignment during measurement. This combination of durability and ergonomic sizing reduces downtime caused by tool changeovers and contributes to a predictable inspection routine in maintenance and production lines. Clear technical attributes that integrate with existing inspection processes As a single, workshop-grade gauge pin, the item is intended for straightforward insertion checks and end‑measure comparisons. Its compact format makes it usable at benches, in fixtures or as a reference during assembly operations. The simple geometry and standard diameter support compatibility with common holding devices and alignment jigs, enabling integration into existing quality control procedures without additional tooling investments. Efficiency and quality assurance tailored for industry use Using a defined reference like this pin reduces subjective judgement in visual or tactile checks and supports a measurable, auditable inspection step. The lightweight construction (approx. 0.15 kg) keeps handling quick and safe, while the robust material choice lowers lifecycle costs by extending service intervals. For production managers and quality engineers, the pin represents a small but effective component to uphold precision across repetitive tasks and to aid traceable inspection routines. Contact Metav Werkzeuge for application support or to confirm suitability for specific bore checks — Metav’s Emmerich team can advise on integration and delivery options Technical data SKU: M323.I18 GTIN: 4061905449321 Category: Gauge pins Facts Diameter: 18.18 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop version FAQ What is the intended use of this gauge pin? The M323.I18 gauge pin is intended for end‑measure verification and bore checking in workshop and production settings where a fixed reference diameter is required. What tolerance does the gauge pin provide? The gauge pin is supplied with a tolerance of ±0.002 mm, suitable for tight inspection limits in routine quality checks. Which materials and environments suit this inspection pin? Made from special steel, the pin is designed for general workshop use and daily handling; it performs well in standard industrial environments where wear resistance is required. Is the gauge pin available individually or in sets? This entry describes a single gauge pin (SKU M323.I18) supplied as an individual inspection element for use in bespoke inspection setups. Can this pin be used with existing holding fixtures? Yes; the straight cylindrical form and standard diameter make it compatible with common jigs and fixtures for alignment and checking operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.19mm Gauge Pin Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of the workshop-grade construction, 18.19 mm diameter and ±0.002 mm tolerance for repeatable end-measure checks; the 50 mm shaft provides stable handling during inspection tasks. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single 18.19 mm, 50 mm length — Metav IndustryLine workshop grade Gauge pin, single 18.19 mm, 50 mm length is a workshop-grade inspection pin designed for end-dimension verification and routine gauging in production and quality control environments. Precision diameter 18.19 mm Length 50 mm for stable handling Tolerance ±0.002 mm Made from special steel, workshop grade Supplied in transport case Repeatable end-dimension checks with workshop robustness This inspection pin is built for consistent performance in busy production areas. The 18.19 mm nominal diameter combined with a ±0.002 mm variation ensures that the pin functions as a reliable reference for end-measure verification and fit checks. Because the shaft measures 50 mm overall, handling is stable during insertion and extraction, reducing operator-induced wobble and improving repeatability. The result is faster inspection cycles and fewer measurement outliers when integrating simple plug checks into a quality routine. Material choice and durability suited to daily use Constructed from special steel in a workshop-grade finish, the pin balances wear resistance with ease of handling. The chosen material maintains dimensional stability under frequent use and resists typical workshop contaminants; this supports a longer service life compared with softer gauges. The design prioritises straightforward maintenance: periodic cleaning and visual inspection keep the reference geometry intact, helping to sustain measurement reliability across numerous production shifts. Accuracy that supports practical quality control With a declared variation of ±0.002 mm, the pin bridges standard workshop needs and higher-precision tasks where fine tolerances matter. This level of accuracy is appropriate for end-measurement controls, assembly fits and verification of machined bores where sub-millimetre conformity is required. The compact, single-pin format allows integration into existing gauging processes without the need for complex fixtures, offering a pragmatic route to tighter in-process control and fewer downstream rejects. Practical handling, storage and supply advantages Delivery in a dedicated transport case protects the pin during storage and transit, reducing the risk of nicks and contamination that can invalidate a reference surface. The single format keeps inventory simple and allows fast replacement when gauges show wear. Supplied by Metav IndustryLine and distributed from Emmerich, the item is part of a broader portfolio that supports straightforward replenishment and consistent quality across workshops and small production facilities. For supply or technical clarification on Metav IndustryLine gauge pins, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com · +49 2822 7131930 — specialist advice and prompt delivery are available Technical data Article number: M323.I19 GTIN: 4061905449338 Manufacturer: Metav IndustryLine Facts Diameter: 18.19 mm Length: 50 mm Tolerance / variation: ±0.002 mm Weight: 0.15 kg Special features Workshop execution Material: Special steel Supplied in transport case Single inspection pin FAQ What materials is the pin made from? The pin is manufactured from special steel; the Metav IndustryLine gauge pin (M323.I19) is designed for workshop durability and wear resistance. How precise is the gauge pin for fit checks? Declared variation is ±0.002 mm, which positions the pin for precise end-dimension verification and assembly fit inspections with reliable repeatability. Is the pin delivered ready to use and protected in transit? Yes. The gauge pin is supplied in a transport case to protect the reference surface during storage and transport. Which tasks is this inspection pin suited for? The pin is intended for end-measure verification, gauging of bores and simple assembly fit checks where a stable single reference is required. Can this pin be used in manual production lines? Yes; the 50 mm shaft length and workshop-grade construction make the pin well suited to manual insertion checks and repeat inspection cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.1mm Test Pin Single 50mm Length Workshop Version - Metav IndustryLine
Taking advantage of a compact, workshop-grade design and ±0.002 mm tolerance, this gauge pin delivers reliable end-measure checks and consistent fit verification in production environments; order the gauge pin directly via Metav Werkzeuge or consult the Metav team for technical advice. Gauge pin M323.I10 — Single inspection pin, 18.10 mm Ø, 50 mm length (Metav IndustryLine) The Gauge pin M323.I10 is a single, workshop-grade inspection pin intended for precise end‑measure and fit checks in general inspection and fixture applications. Workshop-grade inspection pin Diameter 18.10 mm, length 50 mm Accuracy ±0.002 mm Supplied in protective transport case Precision that supports reliable production decisions A compact inspection pin provides a clear, reproducible reference for dimensional checks and assembly verification. With a diameter of 18.10 mm and an accuracy of ±0.002 mm, this test pin is engineered to detect minute deviations that matter in tight-tolerance parts. Using a defined, hardened reference pin reduces measurement uncertainty and speeds up decision-making on the shop floor, supporting consistent quality control and fewer reworks. Built for workshop use and secure transport The workshop version is constructed from special steel, offering high wear resistance for frequent handling and insertion cycles. Its 50 mm length and modest mass make it simple to position within jigs or fixtures, while being robust enough for daily use. The item is supplied in a protective transport case, easing safe storage and reducing the risk of damage in transit — a practical detail that helps maintain the pin’s reference condition over time. Practical compatibility and inspection workflows As a single inspection element, this pin is suited for end‑measure, fit and clearance checks in assembly, toolmaking and maintenance routines. The compact format integrates easily into existing inspection benches or mobile measurement sets and can serve as a quick master for visual and tactile checks. Traceability is supported by the included identifiers, allowing straightforward documentation of inspection tools within production records. Choose the Metav IndustryLine gauge pin for dependable, workshop-ready reference checks and contact Metav Werkzeuge for order and specification support — Metav Werkzeuge is available to advise on integration into existing quality processes Technical data Article number: M323.I10 GTIN: 4061905449246 Weight: 0.15 kg Numbers / Core technical data Diameter: 18.10 mm Length: 50 mm Tolerance / Accuracy: ±0.002 mm Special features Material: Special steel Workshop version Supplied in protective transport case FAQ What is the intended use for this inspection pin? The inspection pin M323.I10 is designed for end‑measure and fit checks in assembly, toolmaking and inspection routines where a precise cylindrical reference is required. What accuracy can be expected from the pin? The M323.I10 provides an accuracy of ±0.002 mm, making it suitable for tight tolerance verification in workshop and production environments. Which material is used for this test pin? This inspection pin is made from special steel, selected for wear resistance and durability during frequent use. How is the gauge pin delivered and protected? The pin is supplied in a protective transport case to prevent damage in transit and to preserve reference integrity during storage. Is the pin identifiable for inventory and traceability? Yes, the product is supplied with identifiers including GTIN 4061905449246 and article number M323.I10 for clear traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com