Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
6.91mm Gauge Pin Single ±0.001mm Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of sub‑micrometre repeatability, a precise 6.91 mm diameter and a compact 50 mm length to streamline dimensional checks in the workshop; order the gauge pin directly via Metav Werkzeuge or contact our consultants for further advice. Gauge pin M323.691 — gauge pin with 6.91 mm diameter and ±0.001 mm tolerance (Metav IndustryLine) The gauge pin M323.691 is a single, high‑precision inspection pin designed for end‑measurement and verification tasks in workshop metrology. Diameter 6.91 mm, tolerance ±0.001 mm Length 50 mm for compact measuring setups Workshop‑grade design for robust daily use Made from high‑grade special steel Ensure production accuracy with sub‑micrometre repeatability A measuring element with a tolerance of ±0.001 mm provides the kind of repeatable result required where tight fits and narrow clearances determine assembly quality. The small diameter of 6.91 mm and the 50 mm length mean the component is easy to position in fixturing and measuring jigs, reducing setup time and cumulative error. The form stability of a precision gauge pin converts dimensional capability into traceable results, supporting consistent in‑process verification and quality assurance workflows. Workshop durability and material choice that supports reliability Constructed from special steel, this inspection pin balances hardness with corrosion resistance appropriate for everyday use in a workshop environment. The workshop version specification indicates components and finishing chosen to withstand handling, while still preserving measuring faces necessary for accurate readings. The material choice limits wear during repeated insertion and extraction cycles, so calibration intervals are extended and maintenance effort is reduced, which benefits throughput and uptime in small to medium‑sized production settings. Practical use: where the measuring pin improves process control As a single inspection element, the measuring pin is intended for plug and end‑face checks, go/no‑go verification in gauge blocks or nest fixtures, and spot checks during assembly. The compact geometry permits access to confined bores and recesses where larger gauges are impractical. When combined with systematic measurement routines, the pin helps to reduce scrap and rework by catching deviations at early stages; its simple form also makes it straightforward to clean, store and integrate into existing control plans without special adapters. For precision checks in the workshop, contact Metav Werkzeuge to discuss the Metav IndustryLine gauge pin M323.691 and ensure reliable delivery from Emmerich — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical data Article number: M323.691 GTIN: 4061905059308 Manufacturer: Metav IndustryLine Core data Diameter: 6.91 mm Length: 50 mm Tolerance / accuracy: ±0.001 mm Weight: 0.019 kg Special features Material: Special steel Delivery form: single inspection pin Intended use: end‑measurement and dimensional verification Designation: workshop version FAQ What measuring tasks is this pin suitable for? The gauge pin M323.691 is designed for end‑measurement, plug checks and spot dimensional verification in workshop metrology, especially where a compact 50 mm length and 6.91 mm diameter are required. How precise is the inspection pin and what does the tolerance mean? The inspection pin carries a tolerance of ±0.001 mm, which represents the manufacturing and calibration allowance; this level of precision supports tight‑fit checks and repeatable go/no‑go assessments. What material is used and how does that affect longevity? Made from special steel, the M323.691 offers a balance of hardness and corrosion resistance that prolongs service life under routine handling and reduces wear on the measuring faces. Is the pin intended for heavy industrial use or workshop inspection? The specification as a workshop‑grade inspection pin indicates it is optimised for daily workshop and production‑line use rather than extreme heavy‑duty applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.92mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Ensure repeatable, shop-floor inspection with a compact gauge that combines micron-level accuracy and workshop durability: 6.92 mm nominal diameter, ±0.001 mm tolerance and 50 mm active length, supplied in a protective transport case. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. M323.692 gauge pin — 6.92 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) A precision M323.692 gauge pin designed for dimensional inspection and end-measure checks in metrology and quality‑control applications Workshop version for robust daily use Nominal diameter 6.92 mm with ±0.001 mm tolerance 50 mm hardened special-steel shaft Supplied in transport case for safe handling Precision that secures production tolerances A compact inspection pin with a 6.92 mm nominal diameter and ±0.001 mm tolerance delivers repeatable results where tight fits and end measurements matter. The declared deviation of ±0.001 mm (1 µm) positions this tool in the fine‑accuracy segment used for final checks, alignment gauges and verification fixtures. The close tolerance reduces measurement uncertainty during pass/fail inspections and supports consistent go/no‑go decision making on the shop floor, shortening cycle time by limiting rework. Built for the workshop: durability and handling benefits Produced in special steel and specified as a workshop version, the pin withstands regular handling and sliding contact in inspection routines. The 50 mm active length offers a practical balance between reach and stiffness for manual checks and fixture use, while the low mass supports quick positioning. Supplied in a protective transport case, the pin remains protected in transit and storage, preserving surface quality and dimensional integrity between uses — a benefit for repair shops and production lines alike. Practical integration into inspection workflows The compact design suits bench inspection, fixture integration and sample checks of mating parts. The straightforward geometry simplifies insertion into bores or sockets for end‑measure verification, enabling rapid comparative checks without complex set‑ups. Traceable ordering and identification via SKU make replenishment and inventory control efficient; the robust construction helps maintain consistent measurement behaviour across repetitive cycles, improving throughput and quality assurance. For secure end‑measure verification with Metav IndustryLine accuracy, contact Metav Werkzeuge to order the M323.692 gauge pin or to request application advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.692 GTIN: 4061905059315 Label: Prüfstift, einzeln, 6,92mm, +/- 0.001 mm Länge 50 mm Numbers / Core technical data Diameter: 6.92 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.019 kg Design / Special features Material: special steel Workshop version Supplied in transport case Category: gauge pin / inspection pin SKU: M323.692 FAQ What tolerance can be expected from this gauge pin? The Metav IndustryLine M323.692 gauge pin is manufactured to a tolerance of ±0.001 mm, enabling micron‑level end‑measure checks for tight fitments. What is the nominal diameter and length of the inspection pin? The inspection pin has a nominal diameter of 6.92 mm and an active length of 50 mm, suitable for bore and end‑face verification. Which material is used for the pin and what does that mean in practice? The pin is made from special steel; this provides wear resistance and surface stability in routine workshop inspection tasks, supporting long service life under regular handling. How is the product delivered to ensure protection? The gauge pin is supplied in a protective transport case to prevent damage during storage and transit and to keep the measuring surface in good condition. Can the M323.692 gauge pin be integrated into fixtures or jigs? Yes, the compact geometry and workshop design allow straightforward integration into inspection fixtures and jigs for repeatable dimensional checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.93mm Gauge Pin, Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Benefit from a combination of ±0.001 mm accuracy, a compact Ø 6.93 mm gauge, and a robust 50 mm length that supports reproducible end‑measurements in workshop environments; order the test pin directly via Metav Werkzeuge or ask our consultants if technical advice is required. M323.693 Test pin – 6.93 mm, ±0.001 mm | Metav IndustryLine workshop version The M323.693 Test pin is a precision end‑gauge designed for workshop inspection and dimensional control of mating and end faces. High precision: ±0.001 mm tolerance Gauge diameter Ø 6.93 mm for end measurements Workshop version with 50 mm overall length Supplied in protective transport case Precision where it matters For tasks that demand repeatable, traceable results, the ±0.001 mm tolerance places this gauge pin in the high‑precision category used for fine inspection and final acceptance checks. The very small tolerance reduces uncertainty when comparing mating components or setting up go/no‑go fixtures; the result is fewer reworks and tighter control of assembly runs. In practical terms, this level of accuracy helps maintain interchangeability in production where end‑dimensions are critical, and the rigid dimensions minimise measurement scatter during routine checks. Compact form for efficient workshop workflows The slender Ø 6.93 mm profile combined with a 50 mm overall length gives a compact handling advantage in confined measuring jigs and probing pockets. The workshop version is manufactured for frequent use: it fits tight spaces and is easy to seat in gauge blocks, fixture pockets or adapter plates. Supplied in a protective transport case, the pin can be carried between inspection points without risk of damage, which supports fast, reliable spot checks on the shop floor and reduces downtime during quality control rounds. Robust material and application focus Made from special steel, the pin emphasises dimensional stability and surface resilience under repetitive seating. Intended as an end‑measurement gauge for final sizes and reference checks, the component is suited to precision inspection routines, verification benches and fixture set‑ups. The single‑piece design and clear identification (SKU M323.693, GTIN 4061905059322) simplify inventory management and traceability in calibrated tool cabinets, while the workshop orientation indicates a balance of durability and handling convenience for everyday industrial use. Contact Metav Werkzeuge for tailored technical advice and to order the M323.693 test pin directly via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: M323.693 GTIN: 4061905059322 Brand: Metav IndustryLine Facts Diameter: 6.93 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.019 kg Special features Material: Special steel Workshop version (robust handling) Supplied in protective transport case Intended for end‑measurements and fixture use Single test pin, individual item FAQ What measurement tasks is this pin suited for? The M323.693 test pin from Metav IndustryLine is designed for precise end‑measurements, fixture set‑up and reference gauging in workshop inspection routines. What tolerance and repeatability does the pin provide? The pin offers a tolerance of ±0.001 mm, providing the repeatability required for tight dimensional verification and interchangeability checks. What material is the pin manufactured from? The M323.693 is made from special steel to ensure dimensional stability and durability under repeated use. Is the pin supplied ready for transport and workshop use? Yes, the test pin is supplied in a protective transport case suitable for workshop handling and safe transfer between inspection stations. Can the pin be integrated into fixtures and gauge assemblies? The compact Ø 6.93 mm diameter and 50 mm length make the pin suitable for use in gauge fixtures, adapter plates and probing pockets for routine quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.94mm Gauge Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Benefit from the combination of ±0.001 mm repeatability, a compact 6.94 mm diameter and a robust 50 mm length for consistent end‑measurement checks; supplied ready for safe transport. Order the gauge pin directly via Metav Werkzeuge or consult our advisors for technical clarification. Gauge pin M323.694 — 6.94 mm, ±0.001 mm (Metav IndustryLine) The gauge pin M323.694 is a single precision gauge pin for workshop inspection and end‑measurement tasks, designed for repeatable go/no‑go verification and fixture checking Workshop-grade execution High accuracy ±0.001 mm Diameter 6.94 mm, length 50 mm Supplied in protective transport box Precision that secures repeatable inspection results High measurement fidelity is the primary requirement for end‑of‑line checks and fixture verification. With a tolerance of ±0.001 mm, this gauge pin provides a quantifiable reference that reduces measurement uncertainty in routine inspection tasks. Such fine tolerance is suited to applications where small deviations affect assembly fit or functional clearance; the tight specification enables reliable pass/fail decisions and supports systematic quality control procedures. The compact diameter of 6.94 mm also makes it practical for confined bores and pins where standard sizes are unsuitable. Built for workshop conditions and safe handling Manufactured in special steel and delivered in a protective transport box, the component is oriented towards workshop use where tools are moved between benches and measuring stations. The 50 mm overall length gives sufficient engagement for many end‑measurement scenarios while keeping the component easy to handle and store. The workshop execution prioritises mechanical robustness and consistent geometry, allowing the pin to be used as a physical reference in jigs, benches and inspection fixtures without complex handling procedures. Practical integration into inspection workflows Traceability and clear identification are important for systematic quality processes; the gauge pin is listed under SKU M323.694 and carries a GTIN for inventory control. The single‑piece design simplifies tooling changes and minimises setup time in repetitive measurement cycles. For production environments that favour compact, high‑accuracy references, this gauge pin offers a straightforward way to validate bore sizes, dowel fits and end‑measurements within established inspection routines. Metav’s Emmerich quality filter underpins the supply chain, ensuring consistent delivery for small batches and replenishment orders Contact Metav Werkzeuge for a tailored quotation or technical consultation on the Metav IndustryLine gauge pin M323.694 (6.94 mm, ±0.001 mm); shipments are handled from Emmerich and technical queries are welcome at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.694 GTIN: 4061905059339 Material: Special steel Weight: 0.019 kg Diameter: 6.94 mm Length: 50 mm Tolerance: ±0.001 mm Facts Diameter: 6.94 mm Length: 50 mm Weight: 0.019 kg Tolerance: ±0.001 mm Special features Workshop execution Single precision gauge pin Delivered in a protective transport box Intended for end‑measurement and inspection tasks FAQ What accuracy does the gauge pin offer? The gauge pin M323.694 is specified to ±0.001 mm, making it suitable for high‑precision inspection and go/no‑go checks. Which material is used for this gauge pin? The gauge pin is manufactured from special steel, selected for stable mechanical properties appropriate to workshop inspection work. Is the gauge pin suitable for fixture checks and dowel verification? Yes; the form and tolerance of the M323.694 support fixture checking, dowel fits and other end‑measurement verifications in production and inspection routines. Does the product include protective packaging for transport? The component is supplied in a protective transport box to ensure safe handling and delivery to the workshop. How is the item identified for stock and procurement? Identification for ordering and inventory is via SKU M323.694 and GTIN 4061905059339, facilitating traceability in procurement systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.95mm Test Pin Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of tight diameter tolerance (6.95 mm ±0.001 mm), a 50 mm compact length and workshop-grade material for consistent end‑measurement checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application matching. Gauge pin, single, 6.95 mm ±0.001 mm (M323.695) — Workshop version A single gauge pin designed for precise end‑measurement and inspection tasks in workshop and inspection environments. Precision diameter 6.95 mm ±0.001 mm Compact 50 mm length for confined checks Workshop-grade special steel construction Single-piece pin for straightforward handling Reliable tolerance for repeatable inspection results The defining characteristic of this gauge pin is the diameter control of 6.95 mm with an accuracy of ±0.001 mm, which makes it suitable for high‑precision end measurements. Such tight tolerance reduces uncertainty when checking bore ends or mating features and supports consistent pass/fail decisions in quality control. The stated accuracy aligns the tool with applications that demand sub‑micrometre repeatability; the compact form factor keeps the measurement process efficient without sacrificing control. Designed for practical workshop use and durability Constructed from special steel in a workshop version, the pin balances hardness and toughness to withstand routine handling and frequent insertion into bores. The single‑piece design eliminates moving parts, simplifying maintenance and reducing wear‑related drift. At a mass of 0.019 kg and a length of 50 mm, the pin is easy to position and manoeuvre during manual checks, making it a pragmatic choice for inspection benches, jig verification and small‑batch production controls. How the gauge pin fits into inspection workflows This plug‑style gauge integrates seamlessly into established inspection routines for end measurements and dimensional verification. Use the pin as a reference mandrel for checking end sizes and concentricity during incoming inspection or final acceptance. Because the tool is compact and precise, it works well alongside hand gauges and bench metrology instruments, providing a deterministic physical reference that complements optical and electronic measuring systems. Practical advantages that support quality management A compact, high‑accuracy pin like this reduces rework by making dimensional discrepancies visible early in the process. The robust material choice and workshop configuration ensure longevity under normal shop conditions, which lowers total cost of ownership when compared with more delicate gauges. The product’s clear numerical specification — diameter, length and tolerance — supplies an objective basis for purchase and inclusion in inspection plans or control plans. Choose the Metav IndustryLine gauge pin M323.695 from Metav Werkzeuge in Emmerich for dependable end‑measurement checks and specification conformity in the workshop environment Technical data Article number: M323.695 GTIN: 4061905059346 Manufacturer: Metav IndustryLine Facts Diameter: 6.95 mm Length: 50 mm Accuracy / tolerance: ±0.001 mm Weight: 0.019 kg Special features Workshop version Material: special steel Intended for end measurement (endmasse) FAQ What is the exact diameter and tolerance of the gauge pin? The gauge pin has a diameter of 6.95 mm with a tolerance of ±0.001 mm, specified for precise end‑measurement checks. What material is the pin made from and how does that affect use? The pin is made from special steel; this provides a balance of hardness and durability suitable for routine workshop inspection tasks. Which applications is this pin intended for? Designed for end measurement and compact inspection duties, the pin is suitable for bore checks, mating feature verification and bench inspection routines. Is this a single‑piece or multi‑component gauge? This is a single gauge pin (single‑piece design), intended for straightforward handling and reduced maintenance complexity. What is the product SKU for ordering or documentation? The SKU for ordering and catalogue reference is M323.695 (Metav IndustryLine). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.96mm Gauge Pin Single ±0.001mm Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of extreme dimensional accuracy, compact form and workshop-ready protection for reliable spot checks and fixture setting. Order the gauge pin directly via Metav Werkzeuge or consult our advisors for application support. Gauge pin M323.696 – Single test pin, 6.96 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) A gauge pin designed for precise end‑measurement and inspection tasks in workshop environments, supplied as a single, transport‑protected test pin. High precision ±0.001 mm tolerance Diameter ground to 6.96 mm for tight fits 50 mm length for compact measurement setups Workshop version with transport case included Precision that meets tight tolerance requirements The M323.696 gauge pin is manufactured to an accuracy of ±0.001 mm, enabling repeatable end‑measurement checks where micro‑clearances matter. A ground diameter of 6.96 mm and a compact length of 50 mm reduce geometric variation in fixtures and allow quick verification of bore sizes and plug fits. The finely controlled tolerance supports efficient quality decisions in inspection loops and minimises rework cycles by providing a clear, objective check against nominal dimensions. Workshop-ready design for routine inspection tasks Produced as a workshop version, this single test pin streamlines everyday measurement tasks on the shop floor. Its compact form and low mass (0.019 kg) make handling straightforward during quick-pass checks or when used in measurement jigs and simple comparators. The supply in a protective transport case keeps the pin secure between uses and reduces the risk of handling damage, which helps to maintain measurement integrity across repeat operations. Material choice for consistent contact performance Constructed from special steel, the pin offers the surface stability expected of precision gauge tools while remaining suitable for repeated contact with mating parts. The material selection focuses on maintaining geometric stability and wear resistance typical for test pins, which supports reproducible readings and long service life under normal workshop conditions. Regular inspection and correct storage in the provided case further extend the serviceable lifetime. Practical integration into quality workflows With a clear SKU and traceable identification, the test pin integrates readily into inventory and inspection systems. Its compact dimensions make it suitable for use in fixture set‑up, plug checking and comparative reference measurements. Where traceability is required, the product identifiers allow easy documentation within quality records to support audit trails and process control. For workshop‑grade precision from Metav IndustryLine, contact Metav Werkzeuge for application advice or delivery details — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and logistics. Technical data Article number: M323.696 GTIN: 4061905059353 Manufacturer: Metav IndustryLine Facts Diameter: 6.96 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.019 kg eClass: 21170231 Special features Material: Special steel Workshop version Supplied in transport case FAQ What is the declared tolerance for this gauge pin? The declared tolerance for the gauge pin M323.696 is ±0.001 mm, suitable for very fine dimensional checks. Which material is used for the test pin? The test pin is made from special steel, chosen to provide the surface stability and wear performance expected of precision gauge pins. Is the pin supplied with protective packaging? Yes, the pin is supplied in a transport case as part of the workshop‑grade delivery to protect the tool during storage and transport. What are the typical applications for this pin? Typical uses include end‑measurements, plug checks, fixture set‑up and quick verification of bore diameters in workshop inspection routines. How is the product identified for inventory or quality records? The product is identified by SKU M323.696 and GTIN 4061905059353, which can be recorded in inventory and inspection systems for traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.97mm Test Pin Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of high-precision measurement, compact handling and robust workshop design to keep final-dimension checks fast and reproducible; order the gauge pin directly via Metav Werkzeuge or consult the Metav team for application advice. Gauge pin M323.697 — single precision pin, 6.97 mm diameter, ±0.001 mm Gauge pin M323.697 is a single precision pin for end-measure checks and dimensional verification in workshop environments Diameter 6.97 mm, ±0.001 mm tolerance Length 50 mm for depth and end-measure checks Special steel construction for durable performance Workshop version delivered in a transport case Stabilise quality control with micrometre-level accuracy The gauge pin M323.697 delivers a defined contact diameter of 6.97 mm with an exceptionally tight tolerance of ±0.001 mm, providing a reliable reference for final-dimension inspections and end-mass verification. This level of accuracy supports faster decision-making in production by making pass/fail assessments straightforward and traceable. The compact 50 mm length keeps handling easy while allowing access into confined features, so measurement cycles become more efficient without sacrificing repeatability. The result is reduced rework and a measurable improvement in first-pass yield. Streamline inspection workflows in the workshop Designed as a workshop version, the precision pin fits naturally into daily inspection routines—whether used as a standalone reference, in fixture checks, or as part of a pin set for comparative gauging. Delivered in a transport case, the pin stays protected between shifts and during transit, reducing the risk of damage that would compromise dimensional integrity. The clear, certified diameter and tolerance simplify documentation and auditor checks, enabling quicker in-process approvals and better coordination between production and quality teams. Robust material and compact handling for long service life Manufactured from special steel, the pin balances surface hardness and dimensional stability to withstand repeated contact checks typical of industrial use. Its light weight supports rapid placement and removal during sequential inspections, while the precise ground geometry ensures consistent seating in corresponding bores or reference faces. Combined with Metav’s distribution and quality control, this precision component contributes to dependable measurement routines across a wide range of machining and assembly tasks, offering confidence where exact end measures matter most. Contact Metav Werkzeuge for technical guidance on the M323.697 gauge pin or to request stock and shipping information: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich — info@metav-werkzeuge.com — +49 2822 7131930 Technical data Article number: M323.697 GTIN: 4061905059360 Material: Special steel Facts Diameter: 6.97 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.019 kg Special features Workshop execution Delivered in a transport case Single gauge pin, individual item FAQ What nominal diameter and tolerance does the gauge pin have? The gauge pin M323.697 has a nominal diameter of 6.97 mm with a tolerance of ±0.001 mm for high-precision reference use. Is the pin suitable for end-measure checks and small-bore verification? Yes, the single precision pin M323.697 is intended for end-measure checks and verification of small bores or reference faces in workshop inspection routines. What material is used and how does it affect durability? The pin is made from special steel; this material provides dimensional stability and wear resistance appropriate for repeated contact measurements. How is the pin supplied for transport and storage? The M323.697 gauge pin is supplied as a single item in a protective transport case suitable for workshop handling and transit. Can the pin be integrated into existing fixture checks? The compact dimensions and precision tolerance of this pin make it suitable for incorporation into fixture and go/no-go checks where a defined reference diameter is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.98mm Gauge Pin, Single, ±0.001 mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of industrial accuracy, compact length and durable construction for consistent end‑measurement results; order the gauge pin directly via Metav Werkzeuge or ask the consultants for application advice. Gauge pin M323.698 — 6.98 mm diameter, ±0.001 mm tolerance, 50 mm length The gauge pin M323.698 is a single hardened test pin designed for precision end‑measurement and go/no‑go checks in workshop and inspection environments. Workshop version for durable use Diameter 6.98 mm, tight tolerance Tolerance ±0.001 mm precision Special steel construction for wear resistance Precision that secures process results A compact, single‑piece test pin offers repeatable measurement performance where tolerances are critical. With a nominal diameter of 6.98 mm and a declared variation of ±0.001 mm, the pin is intended for high‑accuracy end‑measurement and alignment tasks in production control. The narrow tolerance reduces false rejections and supports faster decision cycles on the shop floor; traceable dimensional stability is therefore promoted throughout batch inspections. Technical users will appreciate that such accuracy minimises rework and contributes directly to improved yield. Robust workshop design for frequent handling Constructed from special steel and supplied in a workshop‑oriented finish, the pin tolerates everyday handling without rapid wear. The 50 mm overall length provides a balance between accessibility and stiffness, enabling reliable insertion into bores and against faces without excessive deflection. The hardened surface reduces the need for frequent replacement and extends tool life under repetitive contact conditions. Material choice and heat treatment ensure the component retains its geometry even in routine usage, supporting long service intervals. Practical applications and measurement contexts The test pin is suitable for end‑measurement, setting fixtures, checking bore fits and validating assembly positions in metalworking and toolmaking. Its compact format makes it appropriate for manual gauging stations as well as integration into jig and fixture audits. The combination of tight tolerance and workshop durability is particularly relevant for finishing operations and small‑batch quality checks, where reliable datum points are essential for repeatable setups and consistent part interchangeability. Traceability, identification and procurement Identification is simplified by the clear marking and stock references that accompany the component: SKU M323.698 and the global trade item number enable straightforward inventory control and procurement. The product is classified under gauge pins and is provided with weight and dimensional data for system entry. For buyers and quality engineers, the specification supports quick verification against inspection plans and facilitates ordering through established supply chains. Contact Metav Werkzeuge for tailored technical advice or to request immediate supply from Emmerich; request the gauge pin M323.698 for precision end‑measurements and fixture calibration. Technical data Article number: M323.698 GTIN: 4061905059377 Category: Gauge pins Label: Single gauge pin, 6.98 mm, ±0.001 mm, 50 mm Facts Diameter: 6.98 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.019 kg Special features Material: Special steel Version: Workshop execution Accuracy class: ±0.001 mm SKU: M323.698 FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.698 is specified with a tolerance of ±0.001 mm, intended for high‑precision end‑measurement tasks. Which material is used for the pin and how does it affect wear? Manufactured from special steel, the pin combines hardness with dimensional stability to reduce wear during frequent contact. Is the pin suitable for fixture setting and bore verification? Yes, the single gauge pin is designed for fixture calibration, bore checks and end‑measurement applications in workshop and inspection settings. How is the component identified for inventory and procurement? The item is listed under SKU M323.698 and GTIN 4061905059377, allowing direct entry into purchasing and stock systems. Can the pin be used in automated gauging stations? The dimensional stability and compact form factor make this pin suitable for manual and certain automated gauging setups where a solid datum is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.99mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of extreme fit precision, robust special‑steel construction and compact 50 mm length for reliable end‑measure checks; order the (gauge pin, single, 6.99 mm ±0.001 mm) directly via (Metav Werkzeuge) or ask our consultants if needed. Gauge pin, single — 6.99 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) A precision gauge pin for end‑measure applications, designed as a workshop version for fast, repeatable checking of bore and shaft fits. Workshop version for industrial use Diameter 6.99 mm, high fit precision Tolerance ±0.001 mm Length 50 mm, compact handling Consistent, measurable precision for end‑measure checks The compact precision pin is made for repeatable fit testing where tight tolerances matter. Manufactured in a workshop design, the pin provides a controlled reference for end measurements and go/no‑go checks. With a stated tolerance of ±0.001 mm (1 µm) the component reduces uncertainty in assembly checks and inspection loops, enabling operators to document conformance to drawing limits quickly. This level of precision supports quality assurance processes and shortens decision cycles on acceptance or rework. Robust material and form for everyday industrial use A straight, ground shank in special steel ensures dimensional stability and resistance to wear in routine use. The choice of material combines toughness with the capacity for a fine surface finish, which stabilises contact behaviour during insertion and withdrawal. The compact 50 mm length and standard diameter make the pin easy to handle and store while delivering the surface integrity required for consistent fits. This design reduces the risk of false rejects caused by surface defects or deformation. Traceability and suitability for measurement workflows This precision pin is supplied as a single unit with identifying data suitable for inventory and inspection records. The item is well suited for integration into shop‑floor inspection benches and portable control sets where quick verification of bore or shaft dimensions is required. The clear specification — 6.99 mm diameter with ±0.001 mm tolerance — makes it straightforward to reference in work instructions and inspection reports, supporting transparent measurement processes and audit trails. Practical handling and benefits in the workshop Compact geometry and ergonomic handling mean fewer alignment errors during routine checks. The short length minimises lever action and bending under manual use, translating into more reproducible insertion and withdrawal operations. This improves throughput on repetitive tasks and lowers cumulative measurement uncertainty in production runs. The workshop specification balances durability and precision, offering reliable performance for maintenance, fixture setup and incoming inspection tasks. Contact Metav Werkzeuge for personalised advice on integrating this Metav IndustryLine gauge pin into existing inspection routines and to confirm available stock and delivery options Technical Data Article number: M323.699 GTIN: 4061905059384 SKU: M323.699 Facts Diameter: 6.99 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.019 kg Special features Material: Special steel Version: Workshop design Delivery: Single gauge pin Accuracy class: ±0.001 mm FAQ What is this gauge pin used for? This gauge pin is intended for end‑measure checks, verifying bore and shaft fits using a 6.99 mm reference pin from Metav IndustryLine (SKU M323.699). How tight is the tolerance and what does it mean in practice? The pin has a tolerance of ±0.001 mm, which equals 1 µm; in practice this enables very fine go/no‑go verification and consistent fit testing in production and inspection routines. Is the material suitable for repeated workshop use? Yes, the pin is made of special steel in a workshop design; the material and finish are chosen for durability and stable contact behaviour during repeated checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60mm Round Probe Insert 30x5mm For Digital Uni Caliper Series 240.201‑240.204 - Metav IndustryLine
Take advantage of a corrosion‑resistant stainless steel spare that restores precise contact with a round Ø 5 mm measuring pin and a practical 60 mm pin length, ensuring consistent results when replaced in compatible calipers; order the part directly via Metav Werkzeuge or consult our specialists for installation advice. M240.267 — Measuring insert for Digital‑Uni calipers, Ø 5 mm round pin M240.267 is a stainless steel measuring insert intended as a direct spare for Digital‑Uni calipers series 240.201–240.204, providing a durable, precise contact point for routine workshop measurements. Stainless steel construction Ø 5 mm round measuring pin Compatible with Digital‑Uni 240.201–240.204 Precision restored with a purpose‑made contact tip The exchange insert delivers a clean mechanical interface designed to return a caliper to repeatable measurement behaviour. The Ø 5 mm round pin concentrates contact force on a predictable surface, reducing wobble during small‑diameter checks and helping to maintain measurement stability. Manufactured in stainless steel, the tip resists corrosion and wear, which contributes to sustained precision over many cycles and reduces the need for frequent replacements. Durable materials for workshop conditions Constructed from stainless steel, this spare is specified to withstand typical shop environments where oils, coolants and handling can accelerate wear. The 60 mm pin length is balanced for accessibility without compromising rigidity, translating into fewer re‑checks and faster inspection loops; the modest mass also keeps handling straightforward. Together these properties deliver a reliable, low‑maintenance component that supports production continuity and longer service intervals. Practical spare and simple retrofitting As a purpose‑built measuring insert for the Digital‑Uni series, the component is designed for straightforward replacement with standard workshop tools, enabling fast downtimes and minimal instrument out‑of‑service time. The lightweight construction eases handling during fitment. For customers maintaining a fleet of calipers, stocking this spare part supports predictable maintenance planning and reduces interruptions in quality control procedures. For retrofit parts or technical support on Metav IndustryLine measuring inserts, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com to discuss fitment and delivery options Technical Data Article number: M240.267 GTIN: 4061905053917 Material: Stainless steel Weight: 0.1 kg Measuring pin Ø: 5 mm Pin length: 60 mm Overall length: 70 mm Facts Compatible series: Digital‑Uni 240.201–240.204 Measuring range outside: 0‑X Measuring range inside: 10‑X Special features Round measuring pin Corrosion‑resistant stainless steel Lightweight spare part for calipers FAQ What calipers does this insert fit? This insert fits the Digital‑Uni calipers series 240.201–240.204 and is supplied as the Metav IndustryLine spare part M240.267. Is the measuring pin resistant to corrosion? Yes, the measuring pin is made of stainless steel, which provides corrosion resistance suitable for standard workshop conditions. Can this insert be fitted without special tools? The insert is designed for straightforward retrofitting using common workshop tools and can be replaced quickly to minimise instrument downtime. What are the dimensions of the pin and its length? The pin diameter is Ø 5 mm and the contact pin length is 60 mm; the overall part length is 70 mm. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
670x350x540 Tool Trolley Ribbed Rubber Insert, Only Tool Trolley - Filetta
Benefit from the compact footprint, the built‑in ribbed rubber insert and a workshop‑ready layout that keeps tools organised; order the Filetta tool trolley directly via Metav Werkzeuge or ask our consultants for application advice. Tool trolley MS910.461 (Filetta) — compact storage with ribbed rubber insert A compact Tool trolley MS910.461 designed for organised workshop and measuring‑table use, supplied empty for customised tool layouts. Compact footprint 670 x 350 x 540 mm Supplied empty – orderly storage ready Includes ribbed rubber insert for tools Space‑efficient organisation for busy workbenches The compact footprint (670 x 350 x 540 mm) makes this trolley ideal where bench space is limited but accessibility is essential. Delivered supplied empty, the trolley allows a bespoke layout so tool sets and measuring instruments can be arranged for the fastest workflow; the included ribbed rubber insert stabilises items and reduces noise during handling. This combination supports efficient processes and fewer interruptions at the bench. Practical insert and handling benefits that speed work The ribbed insert provides a slip‑resistant surface that helps keep sockets, gauges and small instruments in place during movement and routine use, which reduces time spent re‑organising. Because the trolley is supplied without contents, it integrates seamlessly into existing tool management systems and drawer inserts can be arranged to match specific inspection or assembly tasks. The result is a tidier workplace and improved throughput for repetitive operations. Designed to fit measuring tables and workshop routines Classified under measuring‑table equipment, the trolley suits metrology workstations and general workshop layouts where organised storage and quick access matter. Its dimensions and form factor make it straightforward to position beside a messtisch or bench without dominating the workspace, supporting a smoother measurement and inspection cycle. The overall design emphasises orderly storage and practical handling rather than unnecessary extras. Choose the Filetta MS910.461 for space‑efficient, workshop‑ready storage and contact Metav Werkzeuge in Emmerich (info@metav-werkzeuge.com | +49 2822 7131930) for specification guidance and delivery arrangements Technical data Article number: MS910.461 Manufacturer: Filetta Dimensions: 670 x 350 x 540 mm Note: Supplied empty, no contents Accessory included: ribbed rubber insert Facts Dimensions (L x W x H): 670 x 350 x 540 mm Special features Category: Messgeräte → Messtisch Delivered for customised tool organisation Ribbed rubber insert for non‑slip placement FAQ Is the trolley delivered with tools inside? The Filetta MS910.461 is supplied empty; no tools or contents are included so the interior can be organised to suit specific requirements. Does the trolley include any inserts to secure tools? Yes, the delivery includes a ribbed rubber insert that helps to stabilise and protect small tools and instruments during handling. What are the exact dimensions and will it fit alongside a measuring table? The trolley measures 670 x 350 x 540 mm and is designed to integrate alongside a measuring table or standard workshop bench without occupying excessive space. Can the interior be customised to hold precision measuring instruments? The empty configuration of the trolley allows custom layout of foam or insert systems so precision devices and gauges can be organised securely. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
6mm Gauge Pin 50mm Length ±0.001mm Workshop Version - Metav IndustryLine
Benefit from pinpoint accuracy, compact dimensions and workshop-grade robustness: the 6.00 mm gauge pin delivers ±0.001 mm tolerance in a 50 mm length for repeatable end measurements. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.600 — 6.00 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The Gauge pin M323.600 is a single, high-precision test pin designed for reliable end‑measurement and inspection use in workshop and production environments. Single gauge pin 6.00 mm with ±0.001 mm tolerance 50 mm special-steel length for workshop use Workshop version optimised for inspection tasks Supplied in protective transport case High-precision control that reduces measurement uncertainty The pin offers a ±0.001 mm tolerance, providing a level of accuracy that narrows decision margins in quality checks and first‑off inspections. Such precision makes the pin suitable where reproducible Go/No‑Go checks or reference fits determine downstream processes; the small diameter of 6.00 mm helps to verify bores, gauges and fixture seats with minimal fixturing effort. By lowering measurement uncertainty, the component supports faster acceptance decisions and fewer reworks, which improves throughput in repetitive inspection routines. Robust design for everyday workshop use Constructed from special steel, this workshop‑grade test pin balances wear resistance with compact handling. The 50 mm length keeps the component manageable in tight setups while providing sufficient engagement for end‑dimension verification. The workshop version designation means the item is intended for frequent handling and routine checks rather than delicate laboratory-only tasks, so repeatability and endurance are focal benefits. Supplied in a protective case, the pin is protected during transport and storage, maintaining its geometric integrity until use. Integrates with inspection jigs and production fixtures Small, precise and simple, the pin is straightforward to incorporate into existing inspection fixtures, plug gauges and modular checking stations. Its consistent diameter and tolerance simplify alignment tasks and reduce setup time when swapping reference pins or calibrating fixtures. The design supports efficient process control: fewer adjustments are required between checks, which helps to maintain steady production rhythms and predictable inspection intervals. Confidence through traceable supply and practical support Sourced via Metav IndustryLine, this test pin comes from a supplier that positions itself as a quality filter for the European market. The combination of consistent component quality and direct supply from Emmerich supports reliable replenishment and integration into workshop tool fleets. For teams seeking practical assurance, the product fits the Metav approach of making high‑precision tools accessible and dependable for everyday industrial use. For workshop inspections or fixture integration, contact Metav Werkzeuge to discuss the M323.600 gauge pin and receive tailored advice from our technical consultants at the Emmerich site (info@metav-werkzeuge.com / +49 2822 7131930) Technical data SKU: M323.600 GTIN: 4061905058509 Product: Test pin, single, 6.00 mm, ±0.001 mm, length 50 mm Manufacturer: Metav IndustryLine Facts Diameter: 6.00 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.014 kg Special features Material: special steel Workshop version Supplied in transport case for transport protection Intended for end measurement / reference checks FAQ What tolerance does this gauge pin offer? The Metav IndustryLine gauge pin M323.600 is specified at ±0.001 mm, making it suitable for high‑precision end‑dimension checks. Which applications suit this test pin? This test pin is designed for end measurements, plug checks and fixture reference use in workshop and production inspection tasks. Is the pin supplied ready for transport and storage? Yes — the gauge pin is supplied in a protective transport case to keep the component secure during handling and storage. What material is used and how durable is it? The M323.600 is made from special steel, selected for workshop durability and consistent dimensional stability under routine use. Can this pin be used for micro components or very small bores? With a diameter of 6.00 mm and very low tolerance, the pin is well suited to fine mechanical checks and small‑bore verification tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6–7 mm Probe Holder For Go/No-Go, Red Single-Sided Aluminium Anodised - Metav IndustryLine
Benefit from a compact, single-sided measuring pin holder that combines a corrosion‑resistant anodised aluminium body with a precise fit for 6–7 mm probe pins; the red mount provides fast visual identification and straightforward fixture integration. Order the component directly via Metav Werkzeuge or consult their advisors for integration into gauge fixtures. Measuring Pin Holder NOGO (6–7 mm) — Anodised Aluminium, Red Mount — Metav IndustryLine The Measuring Pin Holder NOGO, 6–7 mm, red mount, one-sided is a single‑sided holder designed to receive 6–7 mm probe pins for gauge and metrology fixtures, offering a compact mounting solution for workshop and inspection environments. Anodised aluminium body for corrosion resistance For 6–7 mm probe pins and gauge use Single-sided red mount for quick identification Secure mounting for repeatable gauge measurements A robust mounting element made from anodised aluminium ensures consistent mechanical behaviour and good resistance to workshop atmospheres. The component secures 6–7 mm probe pins in a stable position, reducing lateral play and improving repeatability in go/no‑go assemblies and fixture-based checks. In practical terms, the compact profile and defined seating prevent clamping variability, which translates into fewer rechecks and a smoother inspection routine when the holder is incorporated into a gauge train. Clear identification and durable finish for daily use High‑contrast colour coding helps technicians distinguish gauge components at a glance; the red mount on this holder aids visual workflow and reduces setup time in busy measuring areas. The anodised surface finish not only resists corrosion but also minimises wear at contact points, extending service life and preserving the positional accuracy of mounted probe pins. For workshop managers seeking durable fixtures, this combination of finish and form prioritises uptime and lowers lifecycle maintenance. Easy integration into fixtures and modular gauges The single‑sided configuration and compact dimensions support installation into a wide range of fixtures and measurement rigs where space is limited but precision remains essential. The holder’s geometry allows direct replacement or upgrade of existing mounts without major rework of the gauge frame. As a practical benefit, the simple mechanical design reduces assembly complexity and facilitates repeatable alignment during fixture build‑up, helping to standardise measurement procedures across production stations. Contact Metav Werkzeuge to discuss adding this Metav IndustryLine measuring pin holder to workshop fixtures or to request advice on compatible probe pins and fixture layouts Technical data Article number: M318.567.7 SKU: M318.567.7 Brand: Metav IndustryLine Facts Length: 70 mm Width: 14 mm Probe pin diameter: 6–7 mm Colour: red Special features Material: anodised aluminium Single-sided mount for probe pins For gauge and metrology fixture use Compact, space-saving design FAQ What probe pin sizes fit this holder? The Measuring Pin Holder NOGO accepts probe pins with a diameter of 6–7 mm, making it suitable for standard probe pins used in gauge fixtures and metrology checks. Is the holder corrosion-resistant? Yes, the holder is manufactured from anodised aluminium, which provides corrosion resistance and a durable surface for repeated handling in workshop environments. Can this holder be used in go/no‑go gauge assemblies? The single‑sided design and precise seating make the holder appropriate for go/no‑go gauge applications; the red mount also aids rapid identification within a gauge train. Which brand and article number identify this component? This component is supplied under the Metav IndustryLine brand, article number M318.567.7, and is intended for integration into metrology fixtures and gauge systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6–7mm Gauge Pin Set 100 Pieces 70mm Step 0.01mm, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of the combination of 0.01 mm graduation and a compact 6.00–7.00 mm measuring range to perform fast, repeatable inspection work; the set’s 70 mm shank length and special steel construction ensure durability and reliable handling on the shop floor. Order the set directly via Metav Werkzeuge or ask the consultants for application advice. M318.856 Gauge pin set — 6.00–7.00 mm, 0.01 mm graduation (Metav IndustryLine) The M318.856 gauge pin set is a compact inspection kit for fine hole and shaft gauging in precision workshops and quality departments. 0.01 mm graduation for fine inspection Range 6.00–7.00 mm in precise steps 70 mm shank length for deeper bores Special steel for long-term durability Delivered in protective transport case Precise, measurable inspection for small diameters The set is designed for repeatable dimensional checks across a 6.00–7.00 mm band with a 0.01 mm step size, enabling clear, quantifiable decisions during incoming inspection or in-process checks. Such a fine graduation supports fast go/no‑go assessment and incremental tolerance checks without complex fixtures; the numerical specification gives a direct basis for assessing conformity and documenting results. The compact diameter range places the kit in the workshop’s micro inspection category, where short, rigid test pins excel for minimal deflection and reliable contact. Robust handling and consistent contact force Each pin is manufactured from special steel, giving the package resistance to wear and mechanical damage under repeated use. The 70 mm shank length provides secure reach into deeper bores while retaining handling comfort and stiffness, reducing measurement uncertainty caused by pin bending. Storing the pins in a dedicated protective case preserves the set’s calibration condition and simplifies transport between bench and machine, supporting stable measurement routines and low lifecycle maintenance. Practical benefits for quality control workflows A complete set with incremental steps enables fast selection of the matching gauge pin for stepwise verification or fitting tasks, reducing setup time and increasing throughput in routine inspection cycles. The format is well suited to calibration benches, assembly jigs and portable inspection kits, and it integrates easily with existing documentation practices thanks to the clear numerical gradation. The robust material choice contributes to longer re‑service intervals, which lowers total cost of ownership and supports reliable sample testing over many cycles. Contact Metav Werkzeuge today in Emmerich to discuss how the Metav IndustryLine M318.856 gauge pin set can be integrated into existing inspection routines or to request tailored ordering information Technical data Article number: M318.856 GTIN: 4054469182087 Description: 100-piece gauge pin set, 6.00–7.00 mm range Weight: 3.43 kg Diameter range: 6.00–7.00 mm Pin length: 70 mm Graduation: 0.01 mm Material: Special steel Packaging: Protective transport case Category: Gauges (Lehren) Brand: Metav IndustryLine FAQ What diameter range is covered by the set? The M318.856 gauge pin set covers diameters from 6.00 mm to 7.00 mm in 0.01 mm increments for fine verification. How long are the pins and what does that mean for usability? Pins in this set are 70 mm long, which allows measurement into slightly deeper bores while maintaining rigidity and ease of handling. Is the set suitable for shop use and transport between workstations? Yes, the connectors are presented in a protective transport case so the pins remain organised and protected during routine movement around the workshop. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6–7mm Gauge Pin Set 21-Piece 70mm Steps 0.05mm Plastic Case - Metav IndustryLine
Take advantage of the combination of repeatable accuracy, robust special-steel construction and a comprehensive 0.05 mm graduation for reliable bore verification in production and maintenance. Order the pin gauge set directly via Metav Werkzeuge or ask our consultants if needed. Pin Gauge Set M318.826 — 21-piece, 6.00–7.00 mm, 0.05 mm steps (Metav IndustryLine) the Pin Gauge Set provides a graduated selection of precision gauge pins for fast diameter checks and fit verification in toolrooms, production lines and maintenance workshops. Hardened special steel construction 0.05 mm graduated increments 70 mm gauge length for deep bores Precise diameter verification that speeds quality control Reliable inspection starts with clear reference values. The 21-piece gauge pin set covers the range 6.00–7.00 mm in uniform 0.05 mm steps, enabling rapid go/no‑go checks and stepwise narrowing to the required tolerance band. With each pin measured to consistent length (70 mm) and diameter grading, the set supports efficient inline and bench inspections, reducing rework rates and improving throughput. The combination of close graduations and full‑length pins makes it straightforward to confirm mating fits, seatings and bore wear without time‑consuming measurement set‑ups. Durable design for repeatable measurements Constructed from special steel and hardened for wear resistance, the pins maintain dimensional stability through repeated handling. The robust finish minimises surface damage that could otherwise alter the effective diameter during frequent use. This durability translates into long service life and consistent results during serial inspections or maintenance rounds. For shops that rely on reproducible measurements, robustness removes a common source of uncertainty and keeps quality checks practical over the long term. Improved workflow and reduced measuring uncertainty A graded set of 21 gauges helps technicians identify the correct fit quickly: coarse elimination followed by fine selection until the target clearance is achieved. The 0.05 mm step size is well suited to standard workshop tolerances, offering a balance between resolution and practical handling. Using gauge pins in sequence simplifies inspection protocols and shortens decision times compared with repeated micrometre adjustments. The set therefore supports faster cycle times while preserving measurement confidence. Versatile use across production, maintenance and toolmaking These pins are suitable for bore gauging, fixture checks, plug and sleeve verification, and fit testing on newly machined components. The compact set is ideal for toolrooms, jigs and fixtures, assembly stations and service departments where repeatable diameter checks are required. As a portable reference, the collection complements existing metrology tools and integrates easily into inspection routines, from routine maintenance to final quality sign‑off. The set is supplied by Metav IndustryLine and designed for pragmatic workshop use. Choose the Metav IndustryLine pin gauge set for dependable, workshop‑ready inspection and contact Metav Werkzeuge for specific delivery details and technical advice from Emmerich. Technical data Article number: M318.826 GTIN: 4054469181981 Manufacturer: Metav IndustryLine Weight: 1.06 kg Facts Measuring range: 6.00–7.00 mm Graduation: 0.05 mm Pieces per set: 21 Gauge length: 70 mm Special features Material: Special steel Hardened for wear resistance Sequential diameter grading for stepwise verification Suitable for bore and fit testing FAQ What diameters are included in the set? The set contains gauge pins covering 6.00–7.00 mm in 0.05 mm increments for systematic diameter checks. Can these pins be used for deep bore checks? Yes. With a 70 mm gauge length, the pins are suitable for many deeper bores and recessed checks where shorter pins would be impractical. What material are the pins made from? The pins are manufactured from special steel and hardened to provide wear resistance and stable dimensions under repeated use. How does the grading help in production environments? The 0.05 mm step size enables rapid elimination and fine selection during go/no‑go checks, shortening inspection times and improving throughput. Is this set suitable for toolroom and assembly checks? Yes. The 21-piece set is designed for toolrooms, maintenance and assembly lines where repeatable diameter verification is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6–7mm Go/No-Go Test Pin Holder Double-Sided Green Red - Metav IndustryLine
Take advantage of a compact, colour-coded solution that speeds up inspection decisions while resisting workshop wear; the anodised aluminium construction and compatibility with 6–7 mm measuring pins support reliable Go/No‑Go checks on the shop floor. Order directly via Metav Werkzeuge or consult Metav’s experts for integration advice. Measuring Pin Holder GO/NO‑GO – anodised aluminium, for 6–7 mm pins (Metav IndustryLine) The Measuring Pin Holder GO/NO‑GO is a double-sided, colour-coded holder for 6–7 mm measuring pins, intended for rapid visual acceptance checks in inspection, assembly and production environments Double-sided green/red for clear Go/No‑Go For measuring pins 6–7 mm Anodised aluminium construction Compact 88 mm length Faster Go/No‑Go checks improve throughput and reduce errors The compact design puts visual coding and tactile feedback at the operator’s fingertips, enabling quick acceptance or rejection of small parts. Fitted to accept 6–7 mm measuring pins, this holder transforms individual pins into a reliable Go/No‑Go gauge, shortening inspection cycles and lowering throughput times. The anodised aluminium body offers a balance of lightweight handling and dimensional stability, so repeated manual checks remain consistent and traceable. Integrates with standard inspection benches and gauge sets Designed for straightforward workshop use, the holder accepts standard-diameter measuring pins and slots easily into existing fixtures or gauge assemblies. Compatibility with common pin sizes means minimal changes to current procedures while delivering measurable efficiency gains in quality control. The compact footprint and 88 mm length make it suitable for bench-top measuring stations where space and access are at a premium, helping to avoid rework and line stoppages through faster decision-making. Durable finish and clear colour coding for safe, repeatable handling The anodised surface increases resistance to day-to-day wear and keeps the aluminium body free from corrosion and staining that can obscure markings. The double-sided green/red scheme reduces operator uncertainty and supports consistent evaluation across shifts, which in turn reduces inspection variance. The holder’s robust yet simple construction makes cleaning and maintenance straightforward, ensuring it remains a dependable element of the measuring toolkit over time. For reliable integration into inspection routines, ask Metav Werkzeuge about the Metav IndustryLine Measuring Pin Holder and arrange procurement or technical advice via info@metav-werkzeuge.com or by telephone at +49 2822 7131930 Technical data Article number: M318.568.7 SKU: M318.568.7 Brand: Metav IndustryLine Colour: green - red Material: aluminium, anodised Function: for measuring pins 6–7 mm Design: double-sided Go/No‑Go holder Facts Length: 88 mm Width: 14 mm Special features Double-sided green/red visual coding For measuring pins 6–7 mm Anodised aluminium construction Compact design for bench and gauge use Intended for quick Go/No‑Go inspection FAQ What pin diameters fit this holder? The holder accepts measuring pins with diameters of 6–7 mm, making it suitable for standard pins used in many inspection procedures. Can the holder be used for fast checks on an assembly line? Yes, the double-sided Go/No‑Go design and compact form factor enable rapid visual checks suitable for inline inspection and assembly tasks. Is the surface protected against workshop wear and corrosion? The aluminium body is anodised, which improves surface hardness and resistance to everyday workshop wear and contamination. How does the colour coding help reduce inspection errors? The green/red visual contrast clearly signals pass or fail conditions, supporting consistent decisions across operators and shifts and reducing subjective judgement. Which article should be ordered for this holder? Order the Metav IndustryLine holder using article number M318.568.7 or SKU M318.568.7 for accurate procurement and stock control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6–7mm Test Pin Holder With Green Clamping One-Sided - Metav IndustryLine
Compact anodised aluminium holder for 6–7 mm probe pins delivers secure, corrosion‑resistant mounting and fast fixture set‑up; order directly via Metav Werkzeuge or consult our technical team for specification support. Probe Pin Holder GO, 6–7 mm — Anodised Aluminium, Green Single‑Sided (Metav IndustryLine) Probe Pin Holder GO, 6–7 mm — a compact mounting solution for measuring pins, designed for metrology fixtures and inspection setups Anodised aluminium body, lightweight Accepts 6–7 mm probe pins Green single-sided insert Compact 70 mm length for fixtures Secure clamping that improves measurement repeatability The anodised aluminium construction provides a stable, corrosion‑resistant base for probe pins with diameters of 6–7 mm, ensuring repeatable results across routine checks and short production runs. The precision fit of the holder minimises lateral play and reduces rework caused by loose fixtures; this reliability translates into measurable time savings during assembly and inspection workflows. The component is optimised for fixture builders and inspection benches where consistent orientation and low thermal mass are required. Compact form factor for efficient fixture layouts With a 70 mm overall length and a slim 14 mm width, the holder occupies minimal space in tight assemblies while maintaining adequate stiffness for standard metrology tasks. The single‑sided green insert aids quick visual identification on crowded workstations and supports straightforward positioning in modular clamping systems. Lightweight and easy to handle, this accessory is suitable for small to medium‑sized jigs where compactness and clear part coding speed up set‑up and reduce errors. Durable compatibility for workshop and inspection use The surface‑treated aluminium resists wear and environmental effects, offering long‑term service life in everyday workshop environments. Designed specifically to accept 6–7 mm measuring pins, the holder integrates into existing measurement rigs without the need for bespoke adapters, making it a cost‑effective spare or upgrade part for metrology equipment. Supplied as a single‑sided green mounting, the unit supports targeted use cases in inspection, gauging and fixture construction, aligning with practical shop‑floor requirements and Metav IndustryLine’s focus on accessible precision. For specification advice or to secure this Metav IndustryLine probe pin holder for production fixtures, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 and request SKU M318.566.7 Technical data Article number: M318.566.7 Name: Probe Pin Holder GO, 6–7 mm, green single-sided Brand: Metav IndustryLine Dimensions & capacity Length: 70 mm Width: 14 mm Accepts probe pins: 6–7 mm Materials & features Anodised aluminium body Green one-sided insert For metrology fixtures and measuring pins Lightweight and corrosion-resistant FAQ Is this holder compatible with standard measuring pins? The Probe Pin Holder GO accepts measuring pins with a diameter of 6–7 mm and is compatible with common probe pin designs used in fixture and inspection setups; referenced SKU M318.566.7 identifies the exact specification. What material and surface treatment are used? The holder is manufactured from anodised aluminium, providing a lightweight, corrosion‑resistant finish suitable for repeated handling in a workshop environment. Can the holder be used in modular clamping systems? Yes, the compact dimensions and mounting geometry make the holder suitable for integration into modular fixtures and gauging stations where space and orientation control matter. What benefit does the green insert provide? The green single‑sided insert offers rapid visual identification and clear orientation during assembly and inspection, reducing set‑up time and the risk of incorrect placement. Where is this product best applied? Typical applications include metrology benches, inspection fixtures, and jig assemblies in machine shops and production control areas that require secure holding of 6–7 mm measuring pins. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7,01-8mm Messstift-Sätze, Werkstatt-Ausführung, ± 0,004 mm
- aus Spezial-Stahl Werkstatt-Ausführung, Länge 50 mm Genauigkeit < ± 0,004 mm im Behältnis/KastenTechnische Daten- Messbereich: 7,01-8mm- Stufung: 0,01mm- Anzahl/Satz: 100
7,09–10,01 mm Test Pin Set, 90 Pieces, Three-Point Selection 7,1–10 mm, 0,1 mm Steps, Special Steel, Case
Take advantage of the combination of precise dimensional coverage, robust construction and clear traceability to speed up inspection workflows and reduce rework. The 90-piece gauge pin set is supplied in a transport case and includes a dedicated pin holder for organised handling. Order the gauge pin set directly via Metav Werkzeuge or consult our technical team for application advice. M318.529 Gauge Pin Set — 90-piece, 7.09–10.01 mm, special steel (Metav IndustryLine) The M318.529 Gauge Pin Set is a precision test-pin kit for dimensional inspection, calibration and GO/NO‑GO checking in production and quality control environments 90-piece set, 7.09–10.01 mm range Special steel construction for long life Supplied with a pin holder for organisation Transport case for secure storage and transport Faster, repeatable inspection with lab-grade accuracy The set delivers a ±0.004 mm accuracy, offering a reliable baseline for pass/fail assessments and calibration tasks. With a comprehensive 7.09–10.01 mm measuring span available in small steps, routine checks become quicker and less error-prone. The precise sizing of the pins reduces setup time for gauging operations and supports consistent results across multiple operators, helping to cut down on rework and inspection cycles. Built for daily workshop use and durability Manufactured from special steel, the pins resist wear and maintain dimensional stability under regular use. The kit includes a dedicated pin holder that keeps individual gauges organised and a sturdy transport case to protect the contents during handling and storage. These features combine to preserve accuracy over time and make the set suitable for both the shop floor and the calibration bench. Clear increments and traceable tolerances for quality control Pins are supplied in 0.1 mm increments, enabling fine-grained measurement steps without ambiguity. The set also contains three-part offset variants (‑0.01 / 0 / +0.01) for defined tolerance checks, which simplifies GO/NO‑GO schemes and fitting trials. This deliberate configuration supports efficient quality plans and makes documentation straightforward when logging conformity against specified tolerances. Streamline inventory and rely on a European quality filter The compact kit format—90 pieces in a single set—reduces catalogue complexity and simplifies stock management. Supplied by Metav IndustryLine via Metav Werkzeuge, the product benefits from centralised quality control and a dependable logistics flow from Emmerich, which helps to safeguard supply reliability for production-critical measuring tools. This combination of supply assurance and measured performance supports robust manufacturing routines. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine gauge pin set into existing inspection procedures; call +49 2822 7131930 or email info@metav-werkzeuge.com for detailed technical support and ordering. Technical data Article number: M318.529 GTIN: 4054469156156 Material: Special steel Pieces per set: 90 Measuring range: 7.09–10.01 mm Step size: 0.1 mm Accuracy: ±0.004 mm Weight: 5.6 kg Tariff code: 90173000 Core dimensions Range 7.09–10.01 mm Step 0.1 mm Accuracy ±0.004 mm Weight 5.6 kg Features & applications Includes pin holder Supplied in transport case Three-part tolerance variants (‑0.01 / 0 / +0.01) Set type: Gauge pins / test pins Suitable for inspection, calibration and GO/NO‑GO checks FAQ What tolerance can be expected from this gauge pin set? The M318.529 gauge pin set is specified with an accuracy of ±0.004 mm, providing tight, repeatable tolerances for inspection and calibration tasks. Is the set complete for standard dimensional checks in the 7–10 mm range? Yes, the 90-piece configuration covers the 7.09–10.01 mm span in 0.1 mm increments, including offset variants for defined tolerance checks. What material are the pins made from and how does that affect wear? Pins are made of special steel, chosen for dimensional stability and wear resistance to maintain long-term accuracy under regular use. Does the delivery include organisation and transport aids? The kit is supplied with a dedicated pin holder and a robust transport case to secure and organise the pins during storage and handling. Can this set be used for GO/NO‑GO checking and calibration trials? Yes, the configuration with 0.1 mm increments and three-part tolerances (‑0.01 / 0 / +0.01) is well suited for GO/NO‑GO schemes and calibration workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7-8mm Gauge Pin Set 100 pcs 70mm Step 0.01mm Plastic Case - Metav IndustryLine
Combining 0.01 mm graduations, a robust special-steel construction and a 70 mm working length, this gauge pin set provides reliable, repeatable dimensional checks for production and inspection tasks; order directly via Metav Werkzeuge or consult our technical advisors for tailored advice. Metav IndustryLine Gauge Pin Set M318.857 — 7.00–8.00 mm, 0.01 mm increments The Gauge pin set M318.857 is a 100-piece inspection kit of 70 mm gauge pins designed for accurate plug gauging and go/no-go checks in workshop and quality-control environments. Precision steps of 0.01 mm Range 7.00–8.00 mm in 0.01 mm increments 70 mm length for stable insertion Special steel for wear resistance Supplied in a protective case Consistent dimensional verification with fine graduation The set delivers 0.01 mm graduations across the 7.00–8.00 mm range, offering dense incremental checks that simplify root-cause analysis of size variations in production. Tight graduation makes it possible to detect subtle tolerances and assess process drift without complex measuring equipment; the compact step size is particularly valuable when setting up small-bore features or when gauging fits where even a few micrometres matter. The design supports quick comparative checks, reducing the time between measurement and corrective action while preserving traceability in routine inspections. Robust material and handling for workshop use Manufactured from special steel, each pin balances surface hardness with corrosion resistance to withstand frequent insertion and withdrawal. The 70 mm working length improves guidance and stability within bore-type features, lowering the risk of angular misalignment during gauging. Practical benefits include longer service life and more consistent results under repeated use, which in turn reduces replacement cycles and downtime. For users without extensive metrology training, the straightforward nature of plug pins removes operator complexity: insert, check fit, and record result. Organised delivery that protects the set in transit The set is supplied in a protective case designed for transport and organised storage, which keeps the pins accessible and prevents surface damage that could compromise tolerances. The orderly arrangement accelerates selection during inspection routines and protects the inventory between shifts. Because the kit is pre-packaged for workshop conditions, it integrates well into toolbox systems or inspection benches and supports clear stock management for quality teams. Practical application and compatibility in production environments Ideal for small-bore inspection tasks, the kit suits machining, assembly and maintenance operations where repeated go/no-go checks are required. The dense 0.01 mm stepping is well-suited to quality-control loops that require frequent verification of mating parts and fit tolerances. As a straightforward gauging tool, the set complements more elaborate measurement systems by providing quick, reliable confirmation of compliance before parts progress to subsequent stages of production. Contact Metav Werkzeuge for expert advice on integrating the Metav IndustryLine gauge pin set into inspection routines and to arrange prompt delivery from Emmerich. Technical data Article number: M318.857 GTIN: 4054469182094 Brand: Metav IndustryLine Material: Special steel Range: 7.00–8.00 mm Graduation: 0.01 mm Length: 70 mm Pieces per set: 100 Weight: 4.03 kg Core specifications Measuring range minimum: 7.00 mm Measuring range maximum: 8.00 mm Step size: 0.01 mm Pin length: 70 mm Set count: 100 Net weight: 4.03 kg Special features Supplied in a protective case for transport Dense incremental gauging for fine adjustments Suitable for plug gauging and go/no-go checks Durable surface due to special-steel construction FAQ What is included in the gauge pin set M318.857? The Metav IndustryLine gauge pin set M318.857 includes a 100-piece range of plug pins covering 7.00–8.00 mm in 0.01 mm increments, supplied in a protective case for transport. Can these pins be used for daily go/no-go inspection in a workshop? Yes, the gauge pin set M318.857 is designed for routine go/no-go checks and short-cycle verification in production and maintenance settings. What material are the gauge pins made from and why does it matter? The pins are made from special steel, chosen for wear resistance and dimensional stability; this ensures longer service life and consistent inspection results. How long are the individual pins and what benefit does this provide? Each pin is 70 mm long, providing improved guidance and insertion stability for bore-type features, which helps reduce measurement error due to misalignment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7-8mm Gauge Pin Set 101 pcs, 0.01mm Steps, With Pin Holder, Special Steel, Supplied In Case - Metav IndustryLine
Product data contains inconsistent information and cannot be processed. The label specifies a 101-piece set ("101‑tlg."), while the item count field indicates 100 pieces (stuck_pro_satz = 100). This discrepancy creates confusion and prevents accurate processing of the product information. To ensure clarity and usability, it is essential to resolve this inconsistency by aligning the label and item count field. Please correct this discrepancy and provide consistent product data for a full product description. Accurate and consistent product information is crucial for proper documentation, inventory management, and customer understanding, so addressing this issue promptly is highly recommended.
7-8mm Gauge Pin Set 21-Piece 70mm Step 0.05mm, Special Steel in Case - Metav IndustryLine
Take advantage of precision, durable construction and convenient storage to speed up bore verification and quality checks; the compact design and 0.05 mm gradation support reliable repeatability in production. Order the gauge pin set directly via Metav Werkzeuge or contact the Metav team for advice. Gauge pin set M318.827 — 7.00–8.00 mm check pins with 0.05 mm steps (Metav IndustryLine) The Gauge pin set M318.827 is designed for precision checking of hole diameters and fits across the 7.00–8.00 mm range, offering reliable stepwise inspection for small bores in workshop and inspection environments. 21 precision pins in 0.05 mm increments Diameter range 7.00–8.00 mm Pins 70 mm long for through-hole verification Supplied in protective transport case Faster, repeatable checks for small bores A compact set of hardened pins provides a practical way to verify hole sizes with minimal setup time. The 0.05 mm gradation allows close incremental checks within the 7.00–8.00 mm band, so assessment of fit and clearance can be performed without complex gauges. Pins of 70 mm length reach deeper bores and ensure consistent engagement during verification; combined with the special steel construction, the set is built for wear resistance and sustained dimensional stability under regular use. Streamlined inspection routines for production and maintenance The set supports efficient sampling and routine inspection by enabling quick go/no‑go-style checks and staged measurements. Using a graduated collection of gauge pins reduces exchange time compared with single-size instruments, which improves throughput in repetitive tasks. The organised layout in the supplied protective case keeps each pin clearly identified, reducing handling errors and helping maintain traceability within workshop processes while supporting continuous production flows. Practical storage and workplace robustness Delivery in a transport case protects the pins from contamination and mechanical damage during storage or movement between workstations. The compact kit is suited to bench inspection, toolroom applications and maintenance tasks where compactness and clarity of measurement steps matter. The special steel composition gives a balance of hardness and toughness for industrial handling, and the complete set format simplifies inventory management for quality teams and fitters. Choose the Metav IndustryLine gauge pin set for workshop-ready precision and contact Metav Werkzeuge in Emmerich for specification advice or to arrange supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M318.827 GTIN: 4054469181998 Weight: 1.2 kg Core specifications Diameter range: 7.00–8.00 mm Length: 70 mm Graduations: 0.05 mm Pieces per set: 21 Features / materials Material: special steel Supplied in a protective transport case Category: gauges (Lehren) Set format for staged diameter checks FAQ What diameter range does the set cover? The gauge pin set covers the 7.00–8.00 mm range with 0.05 mm increments for stepwise verification. How many pins are included and what are their lengths? The kit includes 21 pins, each 70 mm long, supplied in an organised protective case. What material are the pins made from? Pins are manufactured from special steel, selected for dimensional stability and wear resistance in workshop use. Is the set suitable for through-hole and deeper bore checks? Yes, the 70 mm pin length is intended to access through-holes and deeper bores for consistent verification. Can this set be integrated into routine quality control? The graduated pin collection and protective case make the set practical for routine inspection and sampling within production workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7-8mm Go/No-Go Test Pin Holder Double-Sided, Green/Red - Metav IndustryLine
Take advantage of precise GO/NO‑GO verification combined with an anodised aluminium construction and compatibility with probe pins 0.1–1 mm for fast, repeatable line‑side inspections. Order the probe pin holder directly via Metav Werkzeuge or consult our team for application advice and integration support. Probe pin holder GO/NO‑GO, double-sided 7–8 mm (green/red) – Metav IndustryLine The probe pin holder GO/NO‑GO is a compact inspection aid for quick pass/fail checks, designed to accept probe pins from 0.1 to 1 mm and to simplify visual verification in workshop fixtures and gauges. Double-sided GO/NO‑GO for 7–8 mm checks For probe pins 0.1–1 mm Anodised aluminium body for corrosion resistance Green/red visual pass/fail indicator Rapid, reliable GO/NO‑GO checks for routine inspection The double‑sided GO/NO‑GO arrangement offers an immediate, objective decision at the bench: parts either pass the 7–8 mm tolerance or are flagged for rework. Fitting probe pins 0.1–1 mm ensures compatibility with common test pin inventories and with existing inspection fixtures, reducing setup time. This focused design supports high throughput by converting tactile measurements into a fast visual outcome, improving process flow without adding complex measurement steps. Compact, robust construction that reduces downtime Constructed from anodised aluminium, the holder balances low weight with stable geometry. With a footprint of approximately 14 mm width and 88 mm length, it fits neatly into checking jigs and template arrays while resisting corrosion and typical workshop wear. The clear green/red colouring provides an unambiguous pass/fail cue, lowering human error in repetitive tasks and making the component suitable for routine use in production and maintenance environments. Integrates smoothly into inspection workflows The holder functions as a practical addition to existing gauge sets and fixture arrangements, enabling simple retro‑fitting where clear visual control is required. As a tool from Metav IndustryLine, it benefits from an emphasis on accessible precision and dependable availability for workshops. The design supports consistent outcomes in short inspection cycles and complements statistical process control routines by simplifying the GO/NO‑GO decision into a repeatable, audit‑friendly step. Enquire with Metav Werkzeuge for application advice and request the Metav IndustryLine probe pin holder (SKU M318.568.8) via info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and prompt dispatch Technical Data Article number: M318.568.8 Manufacturer: Metav IndustryLine Designation: Probe pin holder GO-NOGO double-sided, green/red Facts Width: 14 mm Length: 88 mm SKU: M318.568.8 Special features Material: aluminium, anodised For probe pins 0.1–1 mm Double-sided GO/NO‑GO for 7–8 mm checks Colour: green and red FAQ What probe pin diameters are compatible with this holder? The probe pin holder accepts probe pins from 0.1 to 1 mm, allowing flexible use with fine to standard test pins. Can this holder be used directly in existing gauges and fixtures? Yes, the compact anodised aluminium design is intended for integration into existing checking jigs and gauge arrays to provide a clear GO/NO‑GO result. What visual indication does the holder provide for pass or fail? The double‑sided construction uses green and red markings to indicate pass (green) or fail (red) for the 7–8 mm check position. Is the component corrosion resistant for workshop environments? The body is made from anodised aluminium, which provides increased resistance to corrosion and surface wear in typical workshop conditions. Which Metav product is this and how is it identified? This is the Metav IndustryLine probe pin holder, referenced under SKU M318.568.8 and designated as a GO‑NO‑GO, double‑sided holder in green/red. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7-8mm Pin Holder For Gauge Pins 0.1–1mm, Red Aluminium Anodised - Metav IndustryLine
Take advantage of a compact, robust holder that combines durable anodised aluminium construction with precise reception for small measuring pins; its 7–8 mm red receptacle and compatibility with 0.1–1 mm styluses ensure dependable positioning and quick visual identification. Order directly via Metav Werkzeuge or ask the consultants for application advice. Stylus holder NOGO – single‑sided holder with 7–8 mm red receptacle (Metav IndustryLine) The Stylus holder NOGO is a single‑sided, anodised aluminium holder designed to receive precision measuring pins and to provide stable, repeatable seating for workshop and inspection tasks. Anodised aluminium construction Accepts 0.1–1 mm measuring styluses 7–8 mm red receptacle, single‑sided Compact 70 mm length for tight spaces Precise positioning for repeatable measurements A compact holder reduces lateral play and helps maintain repeatability when measuring small features. The machined receptacle is sized for a 7–8 mm interface and is intended for measuring pins with diameters between 0.1–1 mm, giving a stable support that minimises runout. Where repeatable contact points matter most, the combination of a defined receptacle and a slender body improves alignment and reduces measurement uncertainty compared with loose or improvised adapters. Built for efficient workshop and inspection use Made from anodised aluminium, the holder is both lightweight and corrosion‑resistant, easing handling during rapid fixture changes or bench inspections. Its single‑sided design keeps the working profile low while a bold red receptacle provides instant visual identification in mixed tool sets. The compact footprint (approx. 70 mm length, 14 mm width) allows access into confined spaces and contributes to faster set‑up times in the production environment. Straightforward integration and clear identification The device is intended to accept common measuring pins and to mount reliably in standard posts or adapters used in metrology fixtures. Colour coding and a precisely machined seating help to avoid assembly errors and speed visual checks during batch inspection. The robust finish and simple geometry support long service intervals and predictable behaviour under routine handling, making the holder suitable for both shopfloor and quality inspection stations. For tailored advice or to source the Metav IndustryLine stylus holder directly from Metav Werkzeuge in Emmerich, contact the team for specification matching and fast dispatch Technical data Article number: M318.567.8 SKU: M318.567.8 Label: Messstift‑Halter, NOGO, 7 - 8 mm Rote Aufnahme, einseitig Manufacturer: Metav IndustryLine Dimensions Length: 70 mm Width: 14 mm Receptacle diameter: 7–8 mm Accepts measuring pins: 0.1–1 mm Materials & features Anodised aluminium Red receptacle for quick identification Single‑sided design For the reception of measuring styluses (measuring pins) FAQ What diameter of measuring pin fits the holder? The holder accepts measuring pins with diameters from 0.1–1 mm and seats them in the 7–8 mm receptacle for stable positioning. Is the body resistant to workshop corrosion? Yes, the holder is manufactured from anodised aluminium which offers corrosion resistance and a hard surface finish suitable for regular workshop use; the Metav IndustryLine reference is M318.567.8. Can the holder be used in tight fixturing situations? The compact form—70 mm length and a 14 mm width—was designed for confined spaces and is suitable for fixtures where a low profile is required. How does the red receptacle help in daily operation? The red receptacle provides fast visual identification of the seating interface, reducing assembly errors and speeding up pin changes when multiple holders are used in one workshop. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com