Precision rulers for accurate alignment
Precision rulers are specialised measuring tools used to check flatness and straightness in metalworking and inspection processes, providing reliable alignment and verification for assemblies and machined surfaces. They are typically made from stainless steel or precision metals and serve machining, optics, electronics and quality control applications where tight tolerances are required; using a precision ruler improves repeatability and reduces non‑conformances. Common synonyms include straight edge and flatness gauge, and the durable construction alongside fine graduations ensures the tool remains accurate over years of workshop use.
8000mm Tape Measure Tylonâ„¢ 25mm Width mm/cm Belt Clip - STANLEY
Take advantage of the 8 m measuring range and the 25 mm blade for stable, metric measurements; order directly via Metav Werkzeuge or consult our advisers for application-specific guidance. Tylon™ pocket tape measure — 8 m length, 25 mm blade, metric graduation (STANLEY) A Tylon™ pocket tape measure designed for precise metric measuring up to 8 m with a robust 25 mm blade and integrated belt clip, suitable for tradespeople and workshop use 8 m measuring range in mm/cm 25 mm wide blade for stable readings EG II accuracy class for reliable results Integrated belt clip for hands-free carry Precise, professional measuring for everyday work The 8 m measuring range and metric graduation (mm/cm) provide a clear, verifiable basis for measurement tasks across workshop and site applications. The instrument’s EG II accuracy class signals consistent tolerances for routine professional use; this supports reproducible results when laying out components or checking dimensions. The metric scale is easy to read and makes comparison with technical drawings straightforward, which reduces rework and increases throughput in production environments. Built for usability and fast workflows A 25 mm blade gives the tape improved stiffness, which makes one-handed extension simpler and reduces blade sag over longer spans. The compact housing and integrated belt clip keep the tool accessible during tasks, speeding up measurement cycles and improving on-site ergonomics. Supplied in loose packaging, the item suits bulk purchasing and rapid deployment on the shop floor. The combination of stable blade geometry and practical carry options supports efficient measuring routines for repetitive tasks. Suitable for trades, workshops and quality checks Designed with everyday trade demands in mind, the tape measure is appropriate for layout, installation and basic inspection tasks in construction, joinery and mechanical workshops. The model combines clear graduations with a stiff tape to help ensure accurate transfers from plan to workpiece. When specification clarification or additional technical data are required, Metav Werkzeuge provides expert advice and comprehensive product support to aid selection and integration. Contact Metav Werkzeuge for tailored advice on the STANLEY Tylon™ pocket tape measure and to arrange supply from our Emmerich stock — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 4000787090NW Manufacturer: STANLEY Product type: Pocket tape measure Model name: Tylon™ Packaging: loose Facts Length: 8 m (8000 mm) Blade width: 25 mm Graduation: mm/cm Packaging unit: 1 UID: 4000787090NW Special features Accuracy class: EG II Integrated belt clip Metric tape for mm/cm measurements Compact pocket housing FAQ What measuring range does the tape offer? The tape provides an 8 m measuring range (8000 mm) suitable for a wide range of site and workshop measurements. What does accuracy class EG II mean for practical use? EG II indicates a professional-level tolerance standard that ensures consistent and reliable results for routine layout and inspection work. Is the blade suitable for one-handed use? Yes, the 25 mm blade delivers additional stiffness for easier one-handed extension and stable readings over distance. How is the product supplied for trade purchases? The item is supplied in loose packaging with a packaging unit of 1, facilitating bulk handling and rapid deployment. Which SKU identifies this product? This pocket tape measure is listed under SKU 4000787090NW and is the STANLEY Tylon™ model. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8000mm Tape Measure Vario With Lock Ergonomic ABS Housing, Metric mm/mm - BMI
Product data inconsistency: housing material is specified both as "ABS" and as "glass-fibre reinforced polyamide"; cannot generate a reliable product description due to conflicting information, which creates significant challenges in ensuring accurate representation of the product's specifications, potentially leading to confusion for customers and stakeholders who rely on precise details for decision-making, as well as complicating the process of quality assurance, compliance with industry standards, and effective marketing strategies, all of which are critical for maintaining trust and credibility in competitive markets where clarity and consistency in product information are essential for achieving customer satisfaction and operational efficiency.
800mm Precision Steel Ruler, Hardened Ground Lapped, Black Oxide Finish - Metav IndustryLine
Benefit from the combination of hardened tool steel, DIN 874/0 conformity and a blackened, ground and lapped blade to secure repeatable straightness references across workshop and inspection tasks; this robust 800 mm straight edge supports stable setup and reduces rework. Order the item directly from Metav Werkzeuge or consult their specialists for application advice. Hairline straight edge 800 mm (DIN 874/0) — Metav IndustryLine, hardened tool steel The Hairline straight edge 800 mm (DIN 874/0) is a hardened, ground and lapped tool-steel rule with a blackened finish, intended for accurate straightness and flatness checks in workshop and inspection environments. 800 mm hardened, ground and lapped blade Complies with DIN 874/0 tolerance standard Blackened finish reduces glare and corrosion Solid tool-steel construction for stability Reliable reference for inspection and layout work The straight edge serves as a stable reference line for inspection, scribing and machine set-up, offering conformity with DIN 874/0 so that results can be compared against a recognised tolerance class. Because the blade is ground and lapped, the surface presents a uniform contact face that reduces point loading and localised error; this improves repeatability when checking flatness or aligning components. The calibrated geometry of the edge minimises interpretation uncertainty during quality control tasks and supports faster decision making on whether a part meets specification. Robust construction that maintains accuracy over time Constructed from tool steel, fully hardened and finished by grinding and lapping, the blade resists wear and keeps its reference profile under frequent use. The blackened finish reduces glare under workshop lighting and offers a degree of surface protection against corrosion, while the substantial mass contributes to stability during measurement and layout tasks. These attributes reduce the need for constant rechecking and support a steady production flow by lowering the risk of measurement-induced rework. Practical benefits for the workshop and inspection bench At 800 mm length the straight edge strikes a pragmatic balance between reach and handling: long enough for many fixture and housing checks, yet manageable for single-person use. The weight and construction improve contact consistency on measured surfaces, aiding quicker assessments with dial indicators or visual hairline alignment. Supplied as a branded Metav IndustryLine tool, the item aligns with Metav’s approach to democratising precision: reliable quality, broad stock availability and straightforward integration into existing metrology routines help reduce supplier overhead and keep inspections on schedule. For precise straightness checks and robust workshop performance, request the Metav IndustryLine hairline straight edge (SKU M214.027) from Metav Werkzeuge or ask their consultants for assistance in choosing the right inspection reference for specific applications. Technical data SKU: M214.027 GTIN: 4054469106205 Tariff code: 90173000 Facts Length: 800 mm Weight: 6 kg Special features Material: Tool steel, fully hardened, ground and lapped Finish: Blackened (brunited) Standard: DIN 874/0 Category: Measuring instruments / Rulers FAQ What accuracy class does the straight edge meet? The hairline straight edge 800 mm meets the DIN 874/0 standard, providing a recognised tolerance class for straightness checks suitable for workshop inspection tasks. Is the tool suitable for heavy workshop use? Yes; the Metav IndustryLine hairline straight edge (SKU M214.027) is made from hardened tool steel with a ground and lapped surface designed for regular workshop inspection and layout duties. How should the straight edge be cared for to retain accuracy? Store the tool clean and dry, avoid knocks or drops, and protect the blade surface from grit. The ground and lapped finish benefits from light maintenance and careful handling to preserve the reference face. Can the straight edge be used with dial indicators or surface plates? The straight edge is intended as a reference for alignment and comparison work and pairs well with surface plates and dial indicators for visual and quantitative inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Steel Straightedge, Hardened Ground And Lapped, DIN 874/0 - Metav IndustryLine
Take advantage of the combination of 800 mm working length, fully hardened stainless steel construction and DIN 874/0 accuracy for consistent alignment and inspection results. Order the hairline straightedge directly via Metav Werkzeuge or ask our consultants if needed. Hairline straightedge 800 mm — precision alignment rule (Metav IndustryLine) The Hairline straightedge 800 mm (INOX, DIN 874/0) is a hardened, ground and lapped stainless-steel straightedge designed for precise alignment, inspection and layout tasks in machine shops, inspection benches and toolrooms. 800 mm measuring length Hardened, ground and lapped stainless steel DIN 874/0 accuracy class Fine hairline for precise alignment Accurate reference for alignment and inspection A straight and stable reference speeds up inspection and reduces rework. Built to DIN 874/0, the instrument provides a defined tolerance class for straightness and flatness, making it suitable as a workshop reference for alignment checks and comparative inspection. The integrated hairline enables fine visual alignment against edges and surfaces; when used on machine beds, jigs or component faces it simplifies set‑up tasks and shortens inspection cycles, which improves throughput and reduces downtime. Robust construction for long service life Material selection and finishing determine longevity in a busy workshop. The bar is made from stainless steel, fully hardened, then ground and lapped to deliver a wear‑resistant, dimensionally stable surface that resists deformation during handling. The mass of the tool contributes to a stable contact against workpieces, so fewer rechecks are necessary and handling becomes more predictable. Corrosion resistance and surface finish preserve the reference quality, lowering maintenance effort and extending service intervals. Practical identification and workshop integration Clear identification and compatibility ease procurement and inventory control. Identifier details such as SKU M214.127 and GTIN 4054469163260 simplify ordering and stockkeeping; the tariff code supports freight and customs handling. The tool is intended for precision layout, machine alignment and quality inspection in industrial environments, where a durable straight reference improves measurement repeatability and operator confidence. The robust finishing also makes the piece suitable for regular use on inspection benches and in toolrooms without rapid wear. For reliable, workshop-grade alignment choose the Metav IndustryLine hairline straightedge and contact Metav Werkzeuge in Emmerich for order placement or technical guidance: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: M214.127 GTIN: 4054469163260 Tariff code: 90173000 Facts Length: 800 mm Weight: 6 kg Standard: DIN 874/0 Special features Material: stainless steel, fully hardened, ground and lapped Fine hairline for visual alignment Category: straightedge / rule FAQ What tasks is this straightedge best suited for? The hairline straightedge 800 mm is ideal for alignment, visual inspection and layout work on benches, machine beds and fixtures where a stable, straight reference is required. Is the straightedge corrosion resistant? Yes, the straightedge is made from stainless steel and is finished by grinding and lapping to provide long‑term corrosion resistance and surface stability. How does DIN 874/0 affect usability? DIN 874/0 defines the straightness and flatness tolerance class; the classification ensures predictable performance for workshop inspection and alignment tasks. Can the SKU and GTIN be used for procurement? The SKU M214.127 and GTIN 4054469163260 are provided for straightforward ordering, stockkeeping and logistics integration. Is this straightedge suitable for frequent workshop use? The hardened, ground and lapped construction makes the tool well suited to regular workshop use, offering wear resistance and stable reference quality over time. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Working Scale 40 x 5mm Graduations DIN 866/B, Ground Special Steel - Metav IndustryLine
Robust ground special steel construction, precise mm graduation and strict DIN 866/B conformity provide a stable 800 mm reference for workshop layout and inspection; order the working scale directly via Metav Werkzeuge or consult our technical advisors if further details are needed. Working scale 800 x 40 x 5 mm DIN 866/B – ground special-steel rule, mm graduation The Working scale 800 x 40 x 5 mm DIN 866/B, with mm division is a workshop-grade steel rule engineered for layout, measurement and quality-control tasks where a straight, wear‑resistant reference length is required. Ground special steel construction DIN 866/B standard compliant 800 mm measuring length Clear mm graduation for layout A dependable reference for precise workshop measuring The ground construction from special steel ensures a flat and wear‑resistant surface that maintains straightness under regular workshop use. With a full-length mm graduation and adherence to DIN 866/B, the rule functions as a reproducible reference for setting up jigs, checking part lengths and transferring dimensions. The 800 mm measuring span reduces the need for joins or repeated repositioning, which helps to cut cumulative measurement error in production and assembly environments. Built for durability and ease of interpretation A ground finish gives long service life and resists rapid wear, while the scale’s cross-section (40 x 5 mm) provides the stiffness required for handling without excessive flexing. The clear millimetre divisions simplify rapid visual reading during layout operations and routine checks. The construction and finish combine to reduce rework caused by ambiguous markings or surface degradation, supporting smoother shopfloor workflows and consistent results. Practical benefits that support productivity and quality Integrating a standardised, DIN‑compliant steel rule as a workshop datum shortens setup times and improves repeatability across workstations. The material choice and machining quality deliver a stable measuring tool that tolerates daily use without compromising reference accuracy. Backed by Metav’s position as a precision partner for industry and trade, this rule contributes to a predictable quality chain and dependable supply for busy machine shops and toolrooms. Contact Metav Werkzeuge to secure the Metav IndustryLine working scale with 800 mm measuring length and durable ground‑steel construction; technical consultants in Emmerich are ready to advise on compatibility with specific workshop tasks. Technical data Article number: M214.714 GTIN: 4054469109565 Tariff number: 90178010 Category: Measuring instruments › Rulers Facts Dimensions: 800 x 40 x 5 mm Weight: 1.6 kg Standard: DIN 866/B Measuring graduation: mm Special features Material: ground special steel Finish: precision ground surface Label: Arbeitsmaßstab 800 x 40 x 5 mm DIN 866/B, mit mm‑Teilung FAQ What materials is the rule made from? The working scale is manufactured from ground special steel, providing a wear‑resistant surface and stable reference length. Is the scale suitable for precision layout work? Yes. The Working scale 800 x 40 x 5 mm DIN 866/B, with mm division by Metav IndustryLine (SKU M214.714) is designed for workshop layout, inspection and repeatable measurement tasks. Which standard does the ruler comply with? Compliance with DIN 866/B ensures the scale’s graduation and overall dimensions meet established workshop ruler standards. What measuring range does the rule cover? The rule provides an 800 mm measuring length with millimetre graduation across its full span. Is the finish resistant to workshop wear? The precision ground surface increases wear resistance and supports clearer graduation readability over prolonged use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Workshop Rule 40mm Wide 5mm Thick Ground Special Steel - Metav IndustryLine
Combining a robust ground special steel construction with an 800 mm measuring length, the rule delivers a stable reference edge for layout and inspection tasks while resisting wear in daily workshop use. Order the tool directly via Metav Werkzeuge or consult our advisors for application guidance. Workshop rule M214.704 — 800 x 40 x 5 mm, ground special steel (Metav IndustryLine) The Workshop rule M214.704 is a durable straightedge intended for layout, inspection and machining support in general workshop and metalworking environments. 800 mm length for extended reach Ground special steel for stable straightness 40 mm width for secure guidance No chamfer for full-edge measuring Consistent reference for layout and inspection A long, rigid straightedge is the basis for reproducible layout and quick visual inspection. The 800 mm measuring length provides extra reach without sacrificing handling, while the ground special steel surface maintains a reliable straightness over time. In practice this means fewer rechecks during assembly or marking operations and a steady datum for scribing, aligning and checking flatness on medium-sized components. Construction that reduces measurement uncertainty The profile—40 mm wide and 5 mm thick—combines sufficient stiffness with manageable mass for single-person handling. The ground finish lowers surface irregularities that could affect contact, and the absence of a chamfer keeps the full edge available as a reference line. These design choices reduce operator-induced variation and support repeatable results during routine workshop tasks such as fixture set-up or part alignment. Practical handling, durability and workshop integration Made from special steel, ground, the straightedge stands up to knocks and abrasive workshop conditions while remaining serviceable for daily use. The geometry is suitable for guiding scribes, checking runout by eye and comparing against machine tables or component faces. Stored flat and cleaned after use, the tool sustains its performance; when integrated into a set of hand tools it becomes a go-to reference for both quick checks and more deliberate marking jobs. Why this tool makes sense for professional shops For workshops seeking a straightforward and durable reference edge, the combination of extended length and ground special-steel construction offers a cost-effective way to improve layout accuracy and decrease rework. The low-maintenance nature of the design keeps downtime to a minimum, while Metav IndustryLine distribution ensures availability from stock at the Emmerich site for reliable supply to industry and trade. Contact Metav Werkzeuge today for application advice and fast delivery from Emmerich — specify the Metav IndustryLine Workshop rule M214.704 to secure a rugged, long-length reference edge for your workshop. Technical data Article number: M214.704 GTIN: 4054469109497 Category: Rulers Customs tariff number: 90178010 Facts Dimensions: 800 x 40 x 5 mm Measuring length: 800 mm Width: 40 mm Thickness: 5 mm Special features Material: Special steel, ground Edge: No chamfer (full-edge reference) Suitable for layout, inspection and machining tasks Brand: Metav IndustryLine FAQ What is the best use for this workshop rule? The Workshop rule M214.704 is best used as a straight reference for layout, scribing and visual inspection on medium to large components where an 800 mm datum is helpful. Is the edge suitable for direct reference marking? Yes, the full-edge design without chamfer on the Metav IndustryLine rule allows direct use as a reference for scribing and alignment tasks. How durable is the material under workshop conditions? Constructed from ground special steel, the straightedge resists routine wear and maintains straightness when used and stored correctly. Can this rule be used for checking machine tables and large assemblies? The 800 mm length and stiff profile make the rule suitable for spot-checking flatness and alignment on machine tables and assemblies typical in general workshop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Workshop Rule 40mm Wide, 5mm Thick, Bevel Edge, Millimetre Scale - Metav IndustryLine
The combination of a ground special-steel profile, a clear millimetre graduation and a chamfered edge ensures repeatable layout and reliable alignment in everyday workshop tasks; order the ruler via Metav Werkzeuge or consult our specialists for specification matching. Workshop ruler 800 x 40 x 5 mm — Metav IndustryLine, ground special steel, mm scale The Workshop ruler 800 x 40 x 5 mm is a sturdy, ground measuring profile for workshop and metalworking use, combining an easily readable millimetre graduation with a chamfered edge for precise marking and alignment 800 mm hardened, ground special-steel profile Precise millimetre graduation, easy reading Chamfered edge for reliable alignment Repeatable measurements with a rigid profile The ruler's geometry and finish make it suited to routine layout and inspection work where repeatability matters. The 800 mm length with a 40 x 5 mm cross-section provides a balance between reach and stiffness, reducing bend and vibration during handling. The ground special steel surface yields a flat, wear-resistant reference that preserves scale accuracy over time, so measurement routines stay consistent and rework is reduced. This stability supports quicker set‑ups on benches and in fixtures, improving throughput on repetitive tasks. Faster, clearer marking and checking on the shop floor A clear millimetre graduation allows for quick visual readings and accurate scribing without additional gauges. The chamfered edge simplifies edge alignment and prevents the rule from digging into softer workpieces while marking, which minimises measurement error during layout. For machinists and fitters, these features translate into fewer measurement steps and less time spent transferring dimensions, yielding tangible efficiency gains in daily processes. Built for longevity and easy integration into workflows The ground finish resists surface wear and simplifies cleaning after use, maintaining legibility of the scale even in demanding environments. The robust construction suits frequent handling and transport between machines and benches without rapid degradation. Supplied as part of the Metav IndustryLine, the product benefits from Metav’s quality control in Emmerich and its broad spare-part and accessory availability, supporting long-term, reliable use in professional workshops. Contact Metav Werkzeuge today for advice on integrating this Metav IndustryLine workshop ruler into production setups or for delivery details—call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M214.734 GTIN: 4054469109701 Dimensions: 800 x 40 x 5 mm Material: special steel, ground Tariff number: 90178010 Core measurements Length: 800 mm Width: 40 mm Thickness: 5 mm Special features Millimetre graduation Chamfered edge (facette) Ground surface finish Category: rulers (lineals) Brand: Metav IndustryLine FAQ What material is the ruler made from and why does it matter? The workshop ruler is made from ground special steel, a choice that offers a wear‑resistant, flat reference surface; this material maintains the integrity of the millimetre graduation for long service life. Is the scale suitable for precision layout work in a machine shop? Yes, the clear millimetre graduation and the rigid 40 x 5 mm profile make the ruler well suited for machine‑shop layout and general inspection tasks where repeatable alignment is required. Can the ruler be used for marking curved or irregular surfaces? The chamfered edge assists in aligning against straight edges and profiles; for curved or highly irregular shapes, the rule serves as a stable reference but additional fixtures or contour templates are recommended. Does the product come with calibration or a certificate? This workshop ruler is supplied in line with Metav IndustryLine quality procedures; specific calibration certificates are provided only when indicated in the product label or order details. What typical applications does this ruler cover? Common uses include layout and marking, quick dimensional checks on components, alignment of fixtures and jigs, and workshop inspection tasks where a robust, repeatable straightedge is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
810 mm Interior Wooden Case For 800 mm Gauge - Metav IndustryLine
Opt for a purpose-built wooden transport and storage solution with an interior length of 810 mm and a robust 6 kg construction to protect precision straight edges; order the wooden case directly via Metav Werkzeuge or consult our specialists for compatibility advice. Wooden case for 800 mm hairline rule (interior 810 mm) — Metav IndustryLine protective storage The Wooden case for 800 mm hairline rule provides secure storage and safe transport for precision rulers and straight edges used in workshops, inspection rooms and on-site measurement tasks. Solid wooden transport case, interior 810 mm Designed for 800 mm hairline rule compatibility Sturdy 6 kg construction for safe transport Protects precision instruments during transport and storage The purpose-made wooden case combines a precise internal clearance of 810 mm with a sturdy construction to prevent movement and impact damage to delicate straight edges. For instrument custodians and workshop managers this means fewer repair cycles and less downtime: a well‑fitted case reduces the risk of nicks, bends and surface wear that arise during handling. The robust build also aids repeatable stacking and secure placement in vehicles or storage racks, supporting a smoother material flow for quality‑driven operations. Integrates with the workshop to save time and reduce risk Designed specifically for compatibility with an 800 mm hairline rule, the case simplifies logistics and inventory handling in production and inspection environments. The clear sizing eliminates guesswork when assigning storage or tool trolleys, while the solid weight of 6 kg gives a reassuring feel of protection when moving items between benches or to measuring stations. This practical design supports efficient workflows and lowers the likelihood of accidental instrument damage, contributing directly to operational reliability and predictable inspection outcomes. Built and supplied with traceable quality and local support The wooden case is supplied by Metav IndustryLine from the Emmerich warehouse, reflecting a commitment to accessible precision. Local stockholding means shorter lead times and a single trusted source for replacements or matching accessories. Choosing this storage solution aligns with Metav’s promise to democratise precision: reliable products, transparent logistics and a broad range of compatible measuring equipment available from one partner. The combination of tailored fit, solid construction and dependable supply improves long‑term asset protection for any measurement arsenal. Contact Metav Werkzeuge for personalised advice and to reserve the wooden case held at our Emmerich warehouse. Technical data Article number: M214.027.K GTIN: 4061905450181 Label: Holzkasten für Haarlineal 800 mm innen 810 mm SKU: M214.027.K Facts Inside length: 810 mm Suitable for: 800 mm hairline rule Weight: 6 kg Special features Material: wood Purpose: transport and storage for hairline rules Category: Rulers FAQ Is this case suitable for an 800 mm straight edge? Yes. The Wooden case for 800 mm hairline rule is designed with an internal length of 810 mm to accommodate an 800 mm hairline rule with the necessary clearance for safe handling. Does the case provide adequate protection for precision surfaces? The wooden construction and precise internal clearance reduce movement and impact, so the Metav IndustryLine wooden case helps protect the straight edge surface during transport and storage. What are the shipping dimensions and weight to consider for logistics? The case has an internal length of 810 mm and a total weight of 6 kg; these figures support planning for handling and vehicle loading. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8m Tape Measure 25mm Blade mm/cm Graduation Capsule Lock Stainless Steel - Stanley Black & Decker Deutschland GmbH
Reliable, compact measuring for workshops and on-site tasks is achieved by combining an 8 m length with a 25 mm blade and clear mm/cm graduation, delivering dependable everyday accuracy and ease of use; order the STANLEY Pocket Tape Measure 8 m × 25 mm directly via Metav Werkzeuge or ask our consultants if needed. STANLEY Pocket Tape Measure 8 m × 25 mm – mm/cm graduation The STANLEY Pocket Tape Measure 8 m × 25 mm is a compact measuring tool for workshop and site use, offering millimetre/centimetre graduations and a capsule-style case with fixed lock for reliable single-handed operation 8 m measuring length, 25 mm blade width Dual graduation mm/cm for precise readings Sturdy capsule-style case resists impacts Loose packaging, single unit supply Clear, reliable measurements for workshop standards The long, 8 m length combined with a 25 mm blade provides a stable measuring tape that reads easily on both short and extended spans. The mm/cm graduation enables detailed measurements in architectural and fabrication tasks, while the nominal Class II accuracy gives a well-balanced compromise between precision and robustness for general industrial use. For practical purposes, the wider blade improves rigidity during extended pulls, reducing sag and improving repeatability of cuts and layouts. Robust construction that suits everyday site use A compact, capsule-style housing and a fixed locking mechanism offer durability and quick operation in busy environments. The casing shields the mechanism from dust and impact, and the tape’s width contributes to a straight, readable extension when working alone. Both bench and mobile trades benefit from the combination of a resilient case and a readable blade, ensuring fewer measurement errors and less time spent re-measuring during installation or assembly tasks. Efficiency in measuring and logistics for procurement Supplied as a single unit in loose packaging, this tape measure is easy to integrate into existing tool rolls or site kits. The product’s compact profile makes storage efficient and supports fast retrieval on the job. For procurement teams, the clear specification — 8,000 mm length, 25 mm blade width, mm/cm scale — simplifies comparison with other measuring tools and helps standardise equipment across teams and sites, contributing to reduced downtime and consistent measurement processes. For site-ready precision from a trusted brand, contact Metav Werkzeuge to arrange supply of the STANLEY pocket tape measure with its capsule-style case and Class II specification. Technical Data Article number: 4000787344NW Label: Taschenrollbandmaß L.8m B.25mm mm/cm EG II Kapsel Festst.STANLEY Product type: Pocket tape measure UID: 4000787344NW Numbers Length: 8,000 mm Blade width: 25 mm Graduation: mm/cm Special features Capsule-style case with fixed lock Packaging: loose Pack unit: 1 FAQ What length does the tape measure cover? The tape measure has a total measuring length of 8,000 mm (8 m), suitable for most workshop and site tasks where medium-range measurements are required. What scale is printed on the blade? The blade is marked in mm/cm graduations to allow millimetre-precise readings as well as centimetre references for quicker assessments. Is the casing suitable for on-site use? The tape comes in a capsule-style case with a fixed locking mechanism designed to withstand typical site impacts and protect the measuring mechanism. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8m Tape Measure 25mm Blade mm/cm Self-Locking ABS Case With Magnetic Hook - TECWERK
Take advantage of the combination of a matt-yellow steel blade, a self-locking push-button rewind and a compact ABS housing for reliable measurements and fast, efficient workflows. Order the tape directly via Metav Werkzeuge or consult the team for specification support. TECWERK Pocket Retractable Tape Measure L 8 m B 25 mm – Self-locking, Magnetic End Hook The TECWERK Pocket Retractable Tape Measure is a compact workshop tool designed for general industrial measuring tasks, offering an 8 m steel blade with mm/cm graduations and EC Class II accuracy for reproducible results. Matte yellow steel blade 8 m Self-locking push-button rewind End hook with two integrated magnets ABS housing with belt clip and strap EC Class II accuracy, mm/cm graduations Precision that speeds up routine measuring A long, stable blade reduces re-measuring and helps maintain throughput: the 8 m hardened steel tape delivers a clear mm/cm scale across its full length and meets EC Class II requirements for workshop accuracy. The 25 mm blade width provides the necessary stiffness for longer spans, which limits sag and improves single-person measuring. For procurement and production planning, this means faster cycle times and fewer interruptions caused by uncertain readings. Design for one-handed, reliable handling The tape’s self-locking mechanism and push-button rewind support quick operation: measurements lock instantly for recording, while the controlled rewind avoids blade damage and user injury. The end hook with two integrated magnets stabilises the tape on ferrous surfaces, simplifying tasks such as measuring around metal frames or on machinery. These engineering choices translate into lower task times and reduced scrap from measurement errors. Robust build for everyday workshop use Durability is central to reliable tooling. The compact housing made from ABS plastic resists knocks and solvents commonly found in production environments, and the integrated belt clip plus carrying strap ensure the tool is always available at the bench. The matt-yellow lacquered steel blade combines visibility with corrosion protection, extending service life and supporting acceptable repeatability over prolonged use. Practical fit for trades and industry The compact form factor and measured accuracy class make this tape suitable for assembly, maintenance and general workshop measuring where EC Class II precision is sufficient. The combination of a visible blade, magnetic end hook and convenient rewind supports varied applications from on-site installation checks to routine shop-floor layouts, making it a pragmatic choice for users who require dependable, easy-to-handle measuring equipment. Choose the TECWERK tape from Metav Werkzeuge for consistent workshop accuracy and reliable delivery — contact Metav Werkzeuge in Emmerich for detailed product advice and procurement at info@metav-werkzeuge.com or phone +49 2822 7131930 Technical Data Article number: 2000855039NW Product: Pocket retractable tape measure Brand: TECWERK Packaging unit: 1 Facts Length: 8 m Blade width: 25 mm Scale: mm/cm Accuracy: EC Class II Special features Steel blade, matte yellow lacquer Self-locking system, push-button rewind End hook with two integrated magnets Housing: ABS plastic Belt clip and carrying strap FAQ Is the blade suitable for longer spans and single-person measuring? The blade’s 25 mm width and steel construction provide stiffness for longer spans; the tape supports one-person measuring with reduced sag and clearer readings. Does the tape offer magnetic attachment for hands-free measuring? Yes, the end hook has two integrated magnets, which anchor the tape to ferrous surfaces and aid in single-operator tasks with the TECWERK pocket retractable tape measure. How does the rewind and locking work on this model? A self-locking system holds the blade in position for measurement and a push-button rewind returns the blade smoothly, protecting the tape and speeding up work cycles. Is the housing robust enough for workshop use? The housing is made from ABS plastic and includes a belt clip and carrying strap; these features combine to make the unit resilient to everyday workshop impacts and convenient to carry. What level of accuracy can be expected from this tape? The tape meets EC Class II accuracy standards and provides mm/cm graduations for standard workshop measurement requirements. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
8m Tape Measure 25mm Matt Yellow Steel Blade Dual-Scale mm/cm Self-Locking Chrome Plastic Case EG Class II - TECWERK
Take advantage of the 8 m length, 25 mm blade and robust 2K chrome-plastic housing for reliable, fast measurements on site — order the TECWERK pocket retractable tape measure directly via Metav Werkzeuge or ask our consultants if needed. TECWERK Pocket Retractable Tape Measure L 8 m, W 25 mm, EG Class II TECWERK Pocket Retractable Tape Measure — a compact measuring tool for workshop and site applications with dual graduations and a self-locking mechanism Matte yellow lacquered steel tape Double-sided mm/cm graduations Self-locking with push-button rewind Chrome-plastic housing with rubber overlay Durable blade for clear, dependable readings The 25 mm blade is formed from matte yellow lacquered steel, producing a high-contrast surface that improves legibility in varied lighting. Graduations are printed on both sides in mm/cm, with one side arranged for horizontal reading and the other for vertical readings, which reduces read-off errors when measuring edges or heights. As a compact pocket measuring instrument, this tape provides the precision expected from workshop metrology while remaining simple to read during fast-paced tasks. Secure operation and ergonomic handling A self-locking mechanism enables one-handed measurement and an immediate stop of the blade at the required length; a push-button rewind returns the tape smoothly and protects the blade from uncontrolled retraction. The chrome-plastic housing with partial rubber overlay (2K construction) combines impact resistance with a comfortable grip and includes a practical belt clip, ensuring the device stays accessible on the tool belt and resists daily workshop knocks. Long reach with professional tolerances The 8 m length offers extended reach for larger components and site measurements while the double end hook (standard for 5 m and 8 m versions) permits reliable anchoring to edges and accurate zero positioning. The tool meets EG accuracy class II, which corresponds to standardised European tolerances suitable for professional trade and general industrial use, giving a dependable balance between precision and practicality. Built for trade, industry and on-site efficiency Compact yet robust, this measuring tape suits tradespeople, workshop technicians and site operatives who require fast, repeatable measurements without excess weight or bulk. The combination of a wide, readable blade and a resilient housing reduces measurement times and handling mistakes, improving workflow. For businesses seeking consistent supply and advice on integrating measuring tools into their toolsets, Metav Werkzeuge offers dedicated support and a broad selection of compatible instruments. Contact Metav Werkzeuge to arrange supply of the TECWERK pocket retractable tape measure or to request expert advice at info@metav-werkzeuge.com or +49 2822 7131930 — Metav’s consultants assist with product selection and delivery to your workshop Technical data Article number: 2000855018NW Manufacturer: TECWERK Product type: Pocket retractable tape measure Label: Pocket retractable tape measure L 8 m W 25 mm mm/cm EG II 2K Automatic TECWERK Facts Length: 8,000 mm (8 m) Blade width: 25 mm Graduation: mm/cm Accuracy class: EG II Special features Matte yellow lacquered steel tape Double-sided graduations, horizontal/vertical Self-locking system; push-button rewind Double end hook (for 5 m and 8 m versions) Chrome-plastic housing with partial rubber overlay Belt clip 2K housing FAQ Is this tape suitable for use on construction sites? The TECWERK pocket retractable tape measure (SKU 2000855018NW) is designed for workshop and site use, combining a durable housing and readable blade to withstand typical on-site handling. What does EG accuracy class II mean for everyday measuring tasks? EG accuracy class II indicates compliance with European tolerance standards for general professional measuring work; the tape is suitable where standardised, repeatable precision is required without the need for laboratory-grade accuracy. How does the self-locking mechanism operate? The blade locks automatically when extended and releases with a push-button rewind, allowing controlled one-handed measuring and safe retraction to prolong blade life. Can the double end hook be used for both internal and external measurements? Yes, the double end hook is designed to assist with accurate external measurements by hooking onto edges and to support reliable internal measurements by creating a fixed zero reference. Will the graduations remain legible over time and in low light? The matte yellow lacquered finish enhances contrast against printed mm/cm graduations, improving legibility in varied lighting and helping maintain clarity through regular use. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
8m Tape Measure 25mm Steel Blade Mm/Mm EG Class II ABS/TPE Housing - STABILA
Reliable site performance is ensured thanks to the combination of an 8 m measuring range, EG accuracy class II and a robust ABS/TPE housing; order the BM 100 via Metav Werkzeuge for dependable delivery or consult the Metav team for technical advice. BM 100 – STABILA pocket tape measure, 8 m × 25 mm, Class II The BM 100 is a compact pocket tape measure designed for trades and workshop applications, offering an 8 m range with millimetre graduation for precise, repeatable measurements. 8 m measuring range with 25 mm blade Automatic retraction with brake button Durable ABS/TPE housing, shock absorber EG accuracy class II and yellow lacquered blade Accurate reach for demanding measurement tasks The 8 m measuring range combined with a 25 mm blade ensures long reach while the mm graduation and EG accuracy class II provide traceable precision suitable for on-site layout and workshop verification. The bright yellow lacquered steel blade improves legibility in varied light conditions and reduces measurement errors. This makes the tape particularly useful where metric millimetre readings are required repeatedly, such as carpentry layout, metal fabrication set-up and general installation work. Built for everyday workshop and site durability A housing made from ABS/TPE with integrated shock absorber protects internal components against impacts and drops common in daily use. The compact design keeps the instrument portable, while the robust belt clip and the eye for a wrist strap allow secure carriage on the person. The tape’s standard hook and integrated nail eye in the blade tip facilitate anchoring on edges for single-person measurements, reducing the need for additional clamps or helpers and supporting a smoother workflow. Time-saving handling and safety features The automatic retraction is tempered by a secure brake button, enabling controlled tape return and preventing sudden snap-back that can damage the blade or cause injury. The one-sided analog scale is clear and straightforward, accelerating measuring tasks without elaborate setup. Compliance markings such as CE, REACH and RoHS indicate conformity with relevant standards and materials regulations, supporting procurement decisions in professional environments. Order genuine STABILA measuring tools from Metav Werkzeuge in Emmerich or contact Metav Werkzeuge’s technical advisers at info@metav-werkzeuge.com / +49 2822 7131930 for specification support and delivery options Technical data Article number: 8000911842NW Brand: STABILA Product type: Taschenrollbandmaß Model: BM 100 Label: Taschenrollbandmaß BM 100 L.8m B.25mm mm/mm EG II ABS/TPE Metall-Clip STABILA Facts Max. measuring range: 8 m Blade width: 25 mm Division: mm/mm Accuracy class: EG II Net weight: 0.36 kg Width: 4.70 cm Height: 8 cm Length: 8.50 cm Special features Yellow lacquered steel measuring tape Automatic band retraction and brake button One-sided metric scale (analog) Integrated nail eye in hook Belt clip and wrist-strap eye Housing: ABS / TPE Shock absorber Standard hook CE marked REACH compliant RoHS compliant FAQ Is the tape measure suitable for site use with heavy handling? The BM 100 from STABILA features an ABS/TPE housing and a shock absorber, making the measuring tape suitable for frequent on-site handling and workshop conditions. What level of accuracy can be expected? The tape conforms to EG accuracy class II, so the BM 100 provides reliable metric measurements for general professional applications where class II tolerance is acceptable. How is the tape secured during measurement? The blade of the BM 100 includes a standard hook with an integrated nail eye and the housing has a belt clip, enabling secure anchoring and convenient carriage during tasks. Does the measuring tape include safety features to prevent blade damage? Yes, the measuring tape incorporates automatic retraction moderated by a brake button to control blade return and reduce the risk of damage from uncontrolled retraction. Is the scale easy to read in low-light conditions? The blade is a yellow lacquered steel blade, which enhances contrast and readability of the mm graduation in varied lighting situations. Manufacturer: STABILA; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8m Tape Measure 27mm Blade Metric/Millimetre Easy-Clip PC-ABS/TPE EG II - STABILA
Take advantage of the combination of an extended 8 m measuring range, a 27 mm wide blade for enhanced stability and a robust PC‑ABS/TPE casing with EASY‑CLIP for fast attachment; order directly via Metav Werkzeuge or contact the Metav consultants for application advice. BM 300 Pocket Tape Measure by STABILA — 8 m, 27 mm blade The BM 300 pocket tape measure is a compact, metric measuring tool designed for everyday use in construction, fitting and workshop applications, offering a clear mm/mm graduation and practical clip attachment. 8 m measuring range for extended reach 27 mm wide blade for improved stability mm/mm graduation for precise metric readings PC‑ABS/TPE casing with EASY‑CLIP attachment Accurate reach that speeds up measuring tasks The 8 m measuring range combined with a 27 mm blade delivers a balance of reach and rigidity that reduces sagging on longer spans; this results in more reliable linear readings and fewer repositionings on site. The clearly stamped mm/mm graduation supports rapid metric measurement interpretation, while the Class II (EG II) accuracy rating indicates conformity with common European tolerances for general construction and installation work. For users who value predictable results, the dimensional stability of the blade and the standard accuracy class translate directly into fewer re-measures and greater throughput on routine tasks. Durable design for workshop and site environments A PC‑ABS/TPE outer shell protects the mechanism from knocks and daily wear, while the EASY‑CLIP attachment provides convenient, secure fastening to belts or pockets for hands‑free transport. The casing material combines impact resistance with tactile grip, so the tape stays comfortable to handle even during long shift work. The reinforced housing and smooth retraction mechanism minimise risk of damage to the measuring blade, helping maintain the tool’s performance over time and reducing replacement frequency for workshops that demand dependable kit. Practical handling that improves workflow Compact dimensions and ergonomic design make this tape straightforward to deploy for marking, checking and layout tasks; the stable 27 mm blade supports confident one‑person measurements and the retract mechanism returns the blade smoothly to avoid burrs and bends. Labels and features are kept legible for quick reading under varied lighting, and the clip system hastens movement between tasks, saving time across a working day. For small trades or busy maintenance teams, these practical benefits add up to clearer processes and fewer interruptions to the job flow. Contact Metav Werkzeuge for specialised advice on the STABILA BM 300 pocket tape measure and reliable supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 8000911837NW Model: BM 300 Product type: Pocket tape measure Brand: STABILA UID: 8000911837NW Facts Length: 8 m Blade width: 27 mm Graduation: mm/mm Accuracy class: EG II (Class II) Packaging unit: 1 Special features Casing material: PC‑ABS/TPE Attachment: EASY‑CLIP Compact design for pocket or belt mounting Metric measuring blade with clear markings FAQ What is the measuring range of this tape measure? The STABILA BM 300 pocket tape measure offers an 8 m measuring range suitable for most interior and workshop tasks (SKU 8000911837NW). How wide is the measuring blade and why does it matter? The blade is 27 mm wide; increased blade width improves rigidity and reduces sag over distance, making measurements more reliable. What does mm/mm graduation mean? mm/mm graduation indicates metric markings in millimetres on the blade, so readings are taken directly in millimetres without conversion. Is the BM 300 suitable for workshop use? Yes — the PC‑ABS/TPE casing and EASY‑CLIP attachment make the tape resilient and easy to carry during routine workshop and site activities. What accuracy class does this tape meet? The tool conforms to EG II (Class II) accuracy standards, which is appropriate for general construction and fitting measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8m Tape Measure Chrome ABS Housing Auto Retract Band Brake EG Class II - Bayerische Maß-Industrie Arno Keller GmbH
Benefit from a compact measuring solution that combines a chrome-plated ABS housing, an 8 m, 25 mm tape and an automatic rewind with band brake for reliable, repeatable measuring; order directly via Metav Werkzeuge or consult our specialists for application advice. BMI pocket retractable tape measure 8 m × 25 mm – chrome-plated ABS housing, automatic rewind The BMI pocket retractable tape measure is a handheld workshop measuring tool designed for trades and industry, offering an 8 m tape with 25 mm width and millimetre graduations for clear, practical measurement tasks. Chrome-plated ABS housing with clip 8 m length, 25 mm wide tape Millimetre graduations, EG class II accuracy Automatic rewind with band brake Built for precise, everyday measurement The compact tape delivers clear millimetre graduations across an 8 m span, combined with an ample 25 mm tape width that improves legibility and reduces reading errors. The EG class II rating means the instrument meets regulated accuracy standards for many commercial and workshop applications; this classification supports consistent results when measuring components, parts or on-site dimensions, reducing rework and saving time in production workflows. The robust scale and readable markings are ideal where repeatable results are required rather than laboratory-grade precision. Robust housing and dependable rewind for safe handling A chrome-plated ABS housing provides impact resistance and a professional appearance while keeping weight low for single-handed use. The housing includes a secure clip for belt attachment and a band brake that controls tape speed during measurement, preventing abrupt recoil. The automatic rewind mechanism returns the tape smoothly, which prolongs service life and minimizes handling damage. These design elements together enhance operational safety and tool longevity in daily workshop conditions. Two-component design and practical workshop benefits The instrument’s two-component design supports a firm grip and ergonomic handling under greasy or wet conditions commonly found in trade environments. The wider tape profile assists with stand stability thanks to its pronounced curvature, enabling longer unsupported measuring distances. This combination speeds up routine tasks: fewer re-measures, quicker readings and easier storage via the housing clip. For users balancing mobility and durability, the retractable tape offers a pragmatic trade-off between compactness and performance. Transparent specification and application guidance EG class II accuracy and the millimetre/mm graduation system are explicitly indicated to facilitate selection for specific jobs; class II denotes suitability for many commercial measuring tasks but is not intended for high-precision metrology labs. The housing material and rewind features are listed to help evaluate durability and handling in everyday conditions. If further technical clarification is required—such as confirmation of suitability for particular materials or working environments—additional data can be supplied on request to support informed procurement and reduce the risk of mismatched tools. Choose the BMI pocket retractable tape measure for dependable workshop measurement and contact Metav Werkzeuge for tailored advice or procurement from Emmerich via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 4000855419NW Product: Pocket retractable tape measure Type: two-COMP Length: 8 m Tape width: 25 mm Scale: millimetre / mm Accuracy: EG class II Housing: chrome-plated ABS Facts Tape length: 8000 mm Band width: 25 mm Division: mm/mm Packaging unit: 1 SKU / UID: 4000855419NW Special features Automatic tape rewind Band brake for controlled rewind Wide tape with strong curvature for stand stability Housing with belt clip Plastic housing (ABS) EG accuracy class II FAQ What accuracy class does this tape measure have? The tape measure carries an EG class II accuracy rating, which indicates suitability for standard workshop and commercial measuring tasks where regulated precision is required. How long is the tape and how wide is the blade? The blade is 8 m long and 25 mm wide, providing a readable millimetre scale and improved stability for longer unsupported measurements. Is the housing durable for everyday trade use? The chrome-plated ABS housing and band brake deliver durable handling and controlled tape return, making the tool well suited to everyday workshop conditions. Does the tape rewind automatically and is rewind speed controlled? Yes — the tape features an automatic rewind mechanism with a band brake to prevent abrupt recoil and extend component life. Can this tape be carried on a belt or pocket? A built-in clip permits secure attachment to a belt or pocket for convenient on-site carrying and quick access Manufacturer: Bayerische Maß-Industrie Arno Keller GmbH; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8m Tape Measure Two-Component ABS Case Magnetic Hook, Class II Accuracy - BMI
Take advantage of a compact, reliable measuring solution that combines an 8 m tape with a 25 mm wide blade, a sturdy ABS housing with a soft-grip component and a magnetic start hook for fast anchoring; order the tape measure directly via Metav Werkzeuge or ask their consultants for application advice. twoComp pocket tape measure L 8 m, 25 mm – BMI The twoComp pocket tape measure is a compact measuring tool for trade and workshop use, designed for everyday measuring tasks with a durable ABS housing, automatic retraction and a magnetic start hook for secure anchoring. Robust ABS housing with soft-grip component Automatic retraction with stop mechanism Magnetic start hook for secure anchoring Belt clip for quick, hands-free access Precision for routine and demanding measurements The twoComp pocket tape measure L 8 m, 25 mm delivers consistent measuring results by combining a clearly graduated mm/mm blade with accuracy class II. The 25 mm tape width provides a stable blade for longer reach, reducing sag on extended measurements, while the metric graduation ensures compatibility with standard workshop documentation. The stated accuracy class indicates suitability for most construction and installation tasks where repeatable, reliable length data is required. Built to withstand workshop conditions Constructed with an ABS housing and a grippy soft-touch component, the instrument resists everyday impacts and improves handling during long shifts. The internal robust band mechanism is engineered for frequent use, and the automatic retraction is fitted with a stopper to prevent uncontrolled rewind. These features extend service life and reduce the risk of damage during transport or storage, delivering measurable savings in tool replacement and downtime. Faster, safer operation on the job A magnetic hook at the tape origin speeds single-person measuring on ferrous surfaces, enabling accurate one-handed measurements and quicker setup of tasks. The automatic retraction system with integrated stopper and the low-friction blade profile lower the likelihood of abrupt snapping and associated hazards, supporting safer handling. A belt clip keeps the tape readily accessible, improving workflow efficiency on site or in the workshop. Application scope and user guidance The compact measuring instrument is suitable for general building, carpentry and installation work where an 8 m range is sufficient. The tape’s metric graduation and accuracy class II performance make it useful for routine dimension checks, site marking and quick verification tasks. For application-specific requirements or higher accuracy demands, additional technical data can be requested from Metav Werkzeuge to confirm suitability for particular quality assurance processes. For reliable measurement equipment from BMI, contact Metav Werkzeuge for tailored advice or to place an order — Metav Werkzeuge GmbH, Parkring 45, Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 4000855890NW Type: twoCOMP Item: Pocket tape measure Label: Taschenrollbandmaß twoComp L.8m B.25mm mm/mm EG II ABS m.Magnet SB BMI Manufacturer: BMI Packaging unit: 1 UID: 4000855890NW Facts Length: 8 m Tape width: 25 mm Graduation: mm/mm Accuracy: EG II Special features Robust band mechanism Housing: ABS with soft-grip component Automatic retraction with stopper Belt clip Magnetic start hook FAQ Is this tape measure suitable for construction site use? The tape measure is designed for everyday trade and site tasks; its ABS housing, soft-grip component and accuracy class II make it well suited to construction, carpentry and installation work. How long is the blade and how wide is it? The measuring blade is 8 m long with a 25 mm width, providing a stable profile for extended measurements and clear metric graduation in mm/mm. Does the tape have a magnetic hook and what advantage does that bring? Yes — the tape features a magnetic start hook, which enables secure anchoring on ferrous materials and simplifies single-person measuring operations. Can the retraction be stopped during measurement? The automatic retraction includes a stopper to halt rewind, allowing safe handling and precise blade positioning while measuring. Is the product available from Metav and how is technical support provided? The tape measure is offered via Metav Werkzeuge; additional technical details and application advice are available from Metav’s consultants for this BMI pocket tape measure (SKU 4000855890NW). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8m Tape Measure Two-Component Housing ABS With Automatic Rewind, Class II Accuracy - BMI
Take advantage of a compact measuring tool that combines durability, clear metric graduations and convenient carry for steady, reliable measuring in everyday workshop and trade tasks. Order the item directly via Metav Werkzeuge or contact the consultants for technical guidance. twoComp pocket tape measure — 8 m blade, 25 mm width, EC class II (BMI) The twoComp pocket tape measure is a compact workshop measuring tool for general trade and site use, offering an 8 m metric blade with EC accuracy class II and a rugged housing for frequent handling Robust blade mechanism for long service life ABS housing with soft-grip finish Automatic retraction with stopper Integrated belt clip for secure carry Built to withstand daily workshop use while staying comfortable to handle The pocket tape is engineered around a robust blade mechanism that resists wear and maintains consistent retraction, which reduces downtime from damaged tapes. The ABS housing with a soft-grip component offers a non-slip surface during repetitive measuring tasks, improving safety when used at height or on oily surfaces. This construction emphasises long-term durability and steady handling rather than decorative features, so workshop workflows remain efficient and reliable. Precise, readable metric measurements for routine and on-site checks With an 8 m blade and 25 mm width, the measuring tape provides a broad, stable surface for metric graduations that are easy to read across short and medium spans. The EC accuracy class II denotes suitability for general workshop and trade measurements where standardised tolerances are required; the classification ensures consistent performance across repeated use. For users requiring clarity in marking and transfer measurements, the wider blade and clear millimetre divisions support faster, more accurate layout work. Fast, secure operation that saves time on every measurement The automatic retraction mechanism with a reliable stopper permits quick one-handed operation and holds the blade securely when tensioned, which speeds up repetitive measuring tasks. The integrated belt clip keeps the tape readily available at the hip, reducing search time between operations and supporting a more efficient work rhythm. Together, these features reduce handling steps and contribute to measurable time savings during production or on-site inspection. Suitable applications and practical advantages in everyday use This compact measuring device is intended for workshops, contractors and maintenance teams requiring a straightforward, reliable tool for general-purpose measuring. The tape is optimised for marking, layout and quick checks rather than precision calibration tasks; it therefore fits into a toolkit where a balance of precision and practicality is required. For further technical clarification or to confirm fit for a specific application, Metav’s consultants can provide detailed assistance. Contact Metav Werkzeuge for further advice on the BMI twoComp pocket tape measure and arrange fast supply from Emmerich; the Metav team is available for product guidance and order placement Technical Data Article number: 4000855886NW Product: Pocket tape measure Brand: BMI Type: twoCOMP Core measurements Blade length: 8 m Blade width: 25 mm Graduations: mm Accuracy: EC class II Special features ABS housing with soft-grip Automatic retraction with stopper Robust blade mechanism Belt clip FAQ What is the blade length of this pocket tape measure? The blade length is 8 m; the BMI twoComp pocket tape measure provides a long span for general workshop and site measurements. How wide is the blade and why does that matter? The blade width is 25 mm, which offers greater stability and readability of the millimetre markings during layout and transfer measurements. What does EC class II accuracy mean for everyday use? EC class II indicates a measurement tolerance appropriate for routine workshop and trade applications; the twoComp tape is therefore suitable for standard checking and marking tasks. Is the housing suitable for frequent handling in a workshop? Yes, the ABS housing with a soft-grip finish on the twoComp pocket tape measure improves grip and resists typical workshop wear. Does the tape feature a means to hold the blade extended? The tool includes an automatic retraction mechanism with a stopper to hold the blade securely during extended measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
LED Lighting for Rule Magnifier, Clip-On Attachment - Metav IndustryLine
Take advantage of the precise, even LED illumination and the clear compatibility with ruler magnifiers to improve scale readability and workflow reliability. Order the accessory directly via Metav Werkzeuge or consult our specialists for application advice. LED lighting for ruler magnifier — compact LED illumination for scale-reading tasks (Metav IndustryLine) The LED lighting supplies consistent, shadow-minimising illumination for precise readings on ruler-type magnifiers used in inspection and assembly tasks. Bright, uniform LED illumination Compatible with ruler magnifiers Low energy consumption and long life Improve measurement clarity with steady, glare-minimised light Even, reproducible lighting reduces reading errors when working with fine scales and magnified graduations. The LED module provides uniform illumination across the scale plane, so contrasts remain stable and parallax effects are easier to control. By supplying consistent light, the accessory supports faster, more reliable visual inspection and measurement work, which in turn reduces rework and inspection time. The design focuses on delivering an illumination that emphasises edge definition and scale markings without introducing hotspots or distracting reflections. Seamless integration into existing inspection setups The unit is designed for straightforward attachment to common ruler-style magnifiers and comparable scale-reading devices, making retrofit simple in production and laboratory environments. Quick installation translates into immediate operational benefits: measurements can continue with minimal downtime and without additional alignment tools. Compatibility with standard magnifier profiles ensures the lighting becomes part of the working process rather than an extra step, supporting efficient, repeatable measurement routines in both bench-top and mobile inspection situations. Durable performance for everyday workshop and quality-control use LED technology offers long service life and low power consumption, supporting continuous use in busy inspection areas while keeping maintenance intervals long. The robust construction withstands routine handling in metalworking and assembly environments, contributing to dependable uptime. Because the lamp provides stable illumination over time, calibration checks and visual verifications become more consistent, helping teams meet internal quality standards and maintain traceable inspection results with less variability. Contact Metav Werkzeuge for a tailored recommendation on the Metav IndustryLine LED lighting for scale magnifiers: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: M903.204 GTIN: 4061905449093 SKU: M903.204 Brand: Metav IndustryLine Product: LED lighting for ruler magnifier Facts GTIN: 4061905449093 SKU identifier: M903.204 Special features LED illumination technology Intended for ruler-type magnifiers Compact accessory for inspection and scale reading FAQ What does the LED lighting improve compared with ambient workshop light? The LED lighting provides uniform, directed illumination for scale readings, making graduations and edges easier to discern than with general ambient lighting; it is intended for use with ruler magnifiers and similar devices. Is the accessory compatible with all ruler magnifiers? Compatibility is intended for standard ruler-type magnifiers; the Metav IndustryLine LED lighting (SKU M903.204) is designed for straightforward attachment to common profiles used in inspection and measuring tasks. How does the LED lighting affect inspection efficiency? Consistent illumination reduces interpretation errors and speeds up visual measurements, supporting a more efficient inspection flow and fewer repeated checks. Who supplies this product and where can further technical questions be directed? The product is distributed by Metav IndustryLine; for specific fitting advice or technical details refer to Metav Werkzeuge using the contact details provided below Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Accurate checks with precision straightedges
Precision straightedges are high-accuracy measuring tools designed to verify flatness and straightness across surfaces. Available in several lengths and finished from durable metals, these instruments provide a simple, repeatable method for alignment and inspection in industrial settings.
How precision straightedges work and where they are used
A precision straightedge is laid against a surface to reveal deviations from true flatness or a straight line, with fine graduations enabling careful assessment of run-out and planar error. Typical applications include mechanical engineering, electronics, optics and microscopy, machine tool build and quality control, where reliable visual or feeler-gauge inspection prevents assembly issues and functional failure.
Key advantages that cut waste and speed up production
- high accuracy and stable construction reduce measurement uncertainty and help maintain production tolerances.
- stainless steel or other precision metals ensure long service life and corrosion resistance.
- fine graduations and etched scales allow precise readings and repeatable checks.
- various lengths suit bench work as well as larger components, shortening setup time.
- simple handling lowers inspection time and contributes to fewer rejects and rework.
Why Metav is the practical choice for precision straightedges
Metav combines decade-long expertise with a broad range of measurement tools, making it a pragmatic partner for workshop and production buyers. With over 48,000 customers and a catalogue exceeding 250,000 products, Metav operates from Emmerich as a quality filter for the european market, offering consistent availability and straightforward order processing. For those seeking a reliable source of precision straightedges and complementary measuring instruments, Metav’s range and technical information help select the correct specification for the intended inspection task.
In brief
Precision straightedges deliver fast, reliable assessments of flatness and straightness across industries, improving quality control and reducing scrap while being simple to use and maintain.
FAQ
What materials are precision straightedges typically made from?
Precision straightedges are commonly manufactured from stainless steel or other precision metals to ensure stability, wear resistance and longevity in industrial use.
In which industries are precision straightedges most valuable?
Precision straightedges are widely used in mechanical engineering, electronics, optics and microscopy, machine tool construction and general quality control where geometric accuracy is critical.
How is a precision straightedge used to check flatness?
Place the precision straightedge on the surface and inspect gaps visually or with feeler gauges; fine graduations and a straight reference edge make deviations from flatness evident for correction or further machining.
Are different lengths available for precision straightedges?
Yes, precision straightedges are offered in various lengths to match bench-top inspections as well as larger component checks, allowing selection of the most efficient tool for each application.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com