Precision rulers for accurate alignment
Precision rulers are specialised measuring tools used to check flatness and straightness in metalworking and inspection processes, providing reliable alignment and verification for assemblies and machined surfaces. They are typically made from stainless steel or precision metals and serve machining, optics, electronics and quality control applications where tight tolerances are required; using a precision ruler improves repeatability and reduces non‑conformances. Common synonyms include straight edge and flatness gauge, and the durable construction alongside fine graduations ensures the tool remains accurate over years of workshop use.
100 mm Hairline Rule Hardened Tool Steel Blackened DIN 874/00 - Metav IndustryLine
Take advantage of the combination of DIN 874/00 compliance, hardened and lapped tool steel, and a compact 100 mm length for precise layout work in small assemblies; order via Metav Werkzeuge or consult our advisors for application-specific guidance. Hairline ruler 100 mm DIN 874/00 — Metav IndustryLine The hairline ruler 100 mm DIN 874/00 is a compact, workshop-grade layout gauge designed for fine mechanical marking, control tasks and precision alignment in tight spaces. DIN 874/00 conformity for consistent results Hardened, ground and lapped tool steel Blackened finish reduces reflection Compact 100 mm length for micro work Precise, standardised measurement for fine tasks This compact layout tool brings reproducible precision to repetitive marking and inspection tasks by complying with DIN 874/00; the specification assures a defined geometry and edge quality that makes dimension transfer predictable across batches. The blade, made from hardened tool steel and finished by grinding and lapping, maintains a straight edge and narrow sightline, supporting fine visual alignment without wobble. The result is faster set‑ups and fewer rechecks in production and prototyping. Built for micro‑workshops and delicate components Classified in the micro range for short measuring spans, the instrument is ideal for watchmaking, model engineering and small actuator assemblies where a 100 mm gauge offers the best balance of reach and stiffness. The blackened finish reduces surface glare to improve contrast under workshop lighting, while the slim profile keeps handling intuitive when working on miniature parts or inside cramped fixturing. This makes the tool particularly suitable where tactile control and a fine sightline determine the quality of the layout. Durable design that supports consistent processes The combination of a fully hardened substrate and a ground and lapped surface minimises wear and preserves the reference edge even under repetitive use, lowering long‑term measurement drift and maintenance intervals. For practical shop workflow this means fewer replacements and a dependable reference for setting calipers, scribes or optical comparators. Supplied under the Metav IndustryLine, the gauge integrates neatly into a small inspection set or a technician’s pocket, supporting traceable, repeatable layout work day after day. Choose the Metav IndustryLine hairline ruler for robust, standard‑compliant precision; contact Metav Werkzeuge in Emmerich for purchasing advice or application support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M214.020.1 GTIN: 4054469106083 Standard: DIN 874/00 Tariff number: 90173000 Facts Length: 100 mm ECLASS: 21170120 Special features Material: tool steel, fully hardened, ground and lapped Finish: blackened (schwarz bruniert) Category: rulers (lineale) Compact format for fine mechanical layout FAQ What is the intended use of this hairline ruler? This hairline ruler from Metav IndustryLine is intended for fine workshop layout, marking and inspection tasks where a compact, precise reference edge is required; the DIN 874/00 standard supports consistent use in production routines. Is the 100 mm gauge suitable for micro‑mechanical work? Yes, the 100 mm format sits in the micro range for short spans and offers the stiffness and control needed for watchmaking, model engineering and small assembly layout. What material and finish are used on the ruler? The blade is manufactured from hardened tool steel, ground and lapped for a straight, durable edge and provided with a blackened finish to reduce reflection during marking. Does the ruler comply with recognised standards? The instrument conforms to DIN 874/00, ensuring standardised geometry and edge quality for repeatable dimension transfer. Can this ruler be used as a reference for setting calipers and scribes? Yes, the straight, lapped edge and compact form factor make it suitable as a short reference for setting calipers, scribes and other layout tools. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100 mm Steel Hairline Rule, Hardened Ground And Lapped, DIN 874/00 - Metav IndustryLine
Take advantage of a stainless steel construction, DIN 874/00 conformity and a fully hardened, ground and lapped finish for reliable layout and inspection work; order the hairline rule directly via Metav Werkzeuge or consult the technical team for application advice. Hairline rule (stainless steel) 100 mm DIN 874/00 — hardened, ground & lapped | Metav IndustryLine Hairline rule (stainless steel) 100 mm DIN 874/00 provides a compact, precision reference for fine layout and scribing across workshop and inspection tasks Hardened, ground and lapped stainless steel Complies with DIN 874/00 accuracy Compact 100 mm length for fine work Precision where consistency matters The instrument is manufactured to DIN 874/00, which establishes a trusted baseline for small-format linear gauges. The short 100 mm length and the fully hardened bar reduce elastic deformation and maintain a straight reference edge, delivering repeatable results in marking and comparative checks. The hardened, ground and lapped surfaces yield a fine edge that supports accurate scribing and visual alignment, while the stainless composition provides intrinsic corrosion resistance for longer service life. Compact format for fine assembly and inspection A compact rule is often the most practical tool in precision workshops and inspection benches. The small footprint enables use in restrictive set-ups and on delicate assemblies where longer scales would be unwieldy. The fine scale is well suited to layout, inspection and light gauge comparisons in toolrooms, watchmaking and component finishing, offering a reliable reference for short-range measurements and alignment work without sacrificing surface quality or stability. Longevity and handling benefits for daily use Material selection and finishing determine the useful life of small measuring tools. The stainless steel construction, combined with the ground and lapped finish, resists surface wear and preserves the measuring edge under frequent handling. The robust production process yields a dimensionally stable rule that retains its form across repeated use, providing a cost-effective, low-maintenance solution for routine layout and verification tasks in industrial and craft environments. Contact Metav Werkzeuge for a detailed specification and to secure the Metav IndustryLine hairline rule for workshop stock — the technical team in Emmerich is available for application guidance Technical data Article number: M214.120.1 GTIN: 4054469106687 Tariff number: 90173000 Manufacturer: Metav IndustryLine Specifications Length: 100 mm Standard: DIN 874/00 ECLASS: 21170120 Materials & features Material: stainless steel, fully hardened, ground and lapped Finish: corrosion-resistant stainless steel surface Application: fine layout, scribing and inspection Category: Rulers (Lineale) FAQ What level of accuracy does this rule offer? The hairline rule meets DIN 874/00, providing an industrially accepted level of dimensional reliability for short-range reference and layout tasks. Is the material suitable for corrosive workshop environments? The stainless steel construction and lapped finish on the Metav IndustryLine hairline rule ensure enhanced resistance to corrosion and wear in standard workshop atmospheres. Can this rule be used for scribing and marking? Yes, the hardened, ground and lapped edge is intended to support precise scribing and visual alignment for fine assembly and inspection work. Which applications suit the compact 100 mm format best? The 100 mm size is optimised for confined operations such as watchmaking, toolroom layout and component finishing where a short, stable reference is required Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000 mm Wooden Case For 1010 mm Gauge, Transport Box - Metav IndustryLine
Secure, robust wooden construction with an internal length of 1,010 mm makes this case ideal for storing and transporting 1,000 mm hairline rulers; lightweight handling keeps workshop logistics simple. Order the wooden case for 1000 mm hairline ruler directly via Metav Werkzeuge or ask our consultants if needed. Wooden case for 1000 mm hairline ruler — protective transport box by Metav IndustryLine The wooden case for 1000 mm hairline ruler provides secure storage and safe transport for precision measuring rulers used in workshops, inspection benches and teaching environments. Protective wooden construction Internal length 1,010 mm Fits 1,000 mm hairline rulers Lightweight approx. 2 kg Built for secure storage and reliable transport The protective wooden case offers a straightforward way to shield delicate measuring tools from knocks and dust during storage or transit. With an internal length of 1,010 mm, the interior is sized to accommodate a 1,000 mm hairline ruler with a small clearance for easy insertion and extraction. The combination of robust construction and modest mass ensures the case is both stable and portable; this reduces the risk of accidental damage that could lead to measurement errors, preserving the instrument's accuracy over time. Preserving precision and workshop workflow A dedicated storage solution contributes directly to measurement reliability by reducing handling-related wear. Storing a 1,000 mm hairline ruler in a purpose-made wooden case lowers the chance of bent edges or surface marks that impair reading fidelity. The simple, hard-shelled design supports routine workshop logistics: labelled shelving, safe transport between workstations and controlled storage conditions that help maintain calibration intervals and overall instrument life. Practical handling that fits everyday use Weighing approximately 2 kg, the case is light enough for single-person handling yet substantial enough to protect its contents during normal workshop use. The interior dimensions align with common workshop racks and transport trolleys, enabling straightforward integration into existing storage systems. The plain wooden construction is durable and easy to identify at a glance, which speeds up tool selection in busy production or teaching settings. A reliable choice from a precision partner This product is offered under Metav IndustryLine, a range that emphasises accessible precision for industry and craft. Choosing a simple, protective case like this supports a practical quality culture: protecting instruments, reducing replacement costs and easing daily routines. Metav’s focus on dependable supply and a broad product range underpins the practical benefits of choosing matching storage solutions for measurement equipment. Choose Metav IndustryLine’s wooden case for secure transport of 1,000 mm hairline rulers and contact Metav Werkzeuge for tailored delivery from Emmerich to your workshop. Technical data Article number: M214.028.K GTIN: 4061905450198 Label: Holzkasten für Haarlineal 1000 mm innen 1010 mm Manufacturer: Metav IndustryLine Dimensions & numbers Internal length: 1,010 mm Suitable for: 1,000 mm hairline rulers Weight: 2 kg SKU: M214.028.K Materials & features Material: wood Suitable for transport and storage of precision rulers Category: Lineale FAQ What ruler size does the case accommodate? The wooden case has an internal length of 1,010 mm and is designed to hold a 1,000 mm hairline ruler securely. Is the construction suitable for workshop use? Yes, the robust wooden construction provides basic protection during normal workshop handling and short-distance transport. How heavy is the case when empty? The case weighs approximately 2 kg when empty, offering a balance between protection and portability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Assembly Square Double-T Profile With Relief Holes, Aluminium‑Magnesium Alloy Grade 0 - Metav IndustryLine
Benefit from the combination of Grade 0 accuracy, a lightweight aluminium‑magnesium alloy construction and integrated relief holes for reliable alignment in assembly operations; order the assembly straightedge directly via Metav Werkzeuge or consult our specialists if additional information is required. Assembly straightedge M214.745 — 1,000 mm, Grade 0, AlMg alloy (Metav IndustryLine) The Assembly straightedge M214.745 is a precision alignment tool for workshop and production settings, designed to support repeatable positioning and checking of components up to 1,000 mm in length. Grade 0 accuracy for precise alignment Aluminium‑magnesium alloy, lightweight 3 kg Relief holes for easier handling and fixing Flatness 0.008 mm for repeatable measurements Precision where alignment matters The assembly straightedge delivers Grade 0 accuracy across its full span, making it suitable for alignment and inspection tasks that demand tight tolerances. Manufactured from an aluminium‑magnesium alloy, the tool combines low mass with structural stiffness so that handling remains straightforward without compromising measurement stability. The specification of flatness 0.008 mm ensures that planar references and mating surfaces can be checked reliably, reducing rework and set‑up time on the shop floor. Designed for practical workshop use At a net weight of 3 kg, the straightedge is easy to manoeuvre and position, while the integrated relief holes reduce overall weight and provide clamping points for fixtures or temporary fastenings. The compact cross‑section (height 100 mm, width 40 mm) balances rigidity against ergonomic handling, so assembly tasks and in‑process checks can be performed by a single operator where appropriate. The combination of a robust alloy and practical features supports quicker set‑ups and less operator fatigue during repetitive alignment work. Material specification and durability The 1,000 mm rule features a material hardness of HV 80, giving the profile resistance to knocks and wear in an industrial environment while preserving dimensional integrity. Yield and tensile values provided indicate suitability for workshop handling and routine use; the corrosion characteristics of an aluminium‑magnesium alloy also contribute to long service life with minimal maintenance. For users seeking a reliable alignment reference, this straightedge provides a cost‑effective balance of repeatable alignment and everyday durability. Contact Metav Werkzeuge today to secure the Metav IndustryLine assembly straightedge M214.745 for dispatch from Emmerich or to discuss application‑specific requirements with our team Technical Data Article number: M214.745 GTIN: 4054469184524 Facts Length: 1,000 mm Height: 100 mm Width: 40 mm Weight: 3 kg Flatness: 0.008 mm Parallelism: 0.008 mm Hardness: HV 80 Special features Material: Aluminium‑magnesium alloy Grade: 0 Relief holes Yield strength: 110 kg/mm² Tensile strength: 47 kg/mm² EClass: 21170122 FAQ What is the intended use of this straightedge? The assembly straightedge M214.745 is intended for alignment, assembly checks and planar verification of components up to 1,000 mm in length in workshop and production environments. Is the profile suitable for routine workshop handling? Yes, the aluminium‑magnesium construction and a weight of 3 kg make the tool suitable for regular workshop use while maintaining the dimensional stability required for accurate alignment. Can the straightedge be clamped or fixed during setup? The integrated relief holes allow temporary fastening points and facilitate secure clamping during alignment and assembly operations. What level of accuracy does the product provide? The device is specified to Grade 0, with a declared flatness of 0.008 mm and parallelism of 0.008 mm for dependable, repeatable measurements. Which manufacturer supplies this product? This assembly straightedge is offered under the Metav IndustryLine range and supplied via Metav Werkzeuge for European workshop and industrial customers. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Flexible Bending Scale 18x0.5mm Dual Graduations 1/2mm Top, 1mm Bottom, Stainless Steel - Metav IndustryLine
Benefit from the combination of flexible design, stainless-steel construction and dual-sided graduations for reliable profile measurements; order the bending scale directly via Metav Werkzeuge or ask our consultants if needed. Bending scale M214.198 — Flexible stainless-steel 1,000 mm dual-scale The Bending scale M214.198 is a flexible stainless-steel measuring strip designed for profiling and template work on curved and flat surfaces, offering dual graduations for both fine and coarse measurement tasks. Flexible stainless-steel measuring strip 1000 mm Dual-sided graduation: 1/2 mm and 1 mm Slim cross-section 18 x 0.5 mm for surface contact Suitable for curved templates and sheet profiling Accurate profiling on curved surfaces A flexible measuring strip converts a flat rule into a tool that follows contours without losing reference. The flexible construction of this strip allows consistent contact along curves, which leads to fewer transfer errors when creating templates or marking sheet work. The dual-sided graduation (upper 1/2 mm, lower 1 mm) supports both detailed marking and quicker coarse measurements, so one instrument covers multiple steps in the workshop process. This reduces tool changes and streamlines layout tasks where repeatability matters. Robust build for everyday workshop demands Manufactured from stainless steel, the strip resists corrosion and retains a reliable edge even after extended use in humid or oily environments. The slim 18 x 0.5 mm cross-section provides close surface conformity while keeping overall stiffness adequate for a 1,000 mm measuring length. At approximately 0.2 kg, the measuring strip is light enough for handheld profiling yet substantial enough to lie flat during transfer work. The construction balances durability with tactile handling, so the tool endures frequent use without compromising precision. Practical handling and typical applications With a measuring range of 1,000 mm, this strip sits in the Large (500–1,000 mm) class, making it suitable for medium to large templates, sheet-metal profiling, and mould or pattern work where measurement over long radii is required. The flexible format is particularly useful in carpentry, metal fabrication and model making for tracing contours directly from curved parts. Marking and transfer become more efficient because the dual-sided scale allows a choice between fine and coarse increments without swapping tools, supporting a rational workflow that saves time and reduces error. Choose Metav IndustryLine’s bending scale for dependable, flexible measurement — contact Metav Werkzeuge for product details and prompt delivery from Emmerich. Technical data SKU: M214.198 GTIN: 4054469107189 Tariff number: 90178010 Manufacturer: Metav IndustryLine Facts Length: 1,000 mm Measuring range: 0–1,000 mm Cross-section: 18 x 0.5 mm Weight: 0.2 kg Material: stainless steel Special features Dual-sided graduation — upper 1/2 mm, lower 1 mm Flexible design for curved surfaces Corrosion-resistant stainless-steel construction Applications: template making, sheet profiling, contour transfer FAQ What materials is the bending scale suitable for? The bending scale M214.198 is made of stainless steel and is suitable for marking and profiling on common workshop materials such as sheet metal, timber templates and plastics where a flexible measuring strip is required. Can the strip follow tight radii without distortion? The flexible execution of the M214.198 allows it to conform to moderate radii used in template and profiling work; for extremely tight radii a smaller specialist strip may be more appropriate. How are the graduations arranged on the scale? Graduations are dual-sided: the upper edge is marked in 1/2 mm steps for finer layout, while the lower edge uses 1 mm increments for quicker alignment and coarse measurement. Is the measuring strip delivered calibrated? This product is supplied as a measuring tool; no calibration certificate is included unless expressly specified. The M214.198 is a workshop measuring instrument intended for layout and profiling tasks. What typical workshop tasks suit this bending scale? The M214.198 is designed for template production, sheet-metal profiling, model and mould marking, and any application where accurate transfer of curved outlines over a 1,000 mm length is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Flexible PET Measuring Tape 0.25mm Scale, Transparent, 25x0.1mm Cross-Section - Metav IndustryLine
Take advantage of a lightweight, transparent PET film scale with a fine 0.25 mm graduation and a full 1,000 mm measuring length — ideal where flexible, accurate length and circumference checks are needed. Order directly via Metav Werkzeuge or contact our consultants for application advice. Flexible PET Measuring Tape — 1000 mm, 0.25 mm scale (Metav IndustryLine) The Flexible PET Measuring Tape is a transparent, rollable 1 m scale for length, distance and circumference measurement in workshops, prototyping and quality checks. Flexible PET film, transparent Precise 0.25 mm scale 1,000 mm length, compact and rollable Cross-section 25 x 0.1 mm, low profile Accurate gradation for detailed measurement tasks The thin division of 0.25 mm provides a closer visual read than standard 1 mm scales, making the tape well suited for tasks that require fine alignment or quick comparative checks. Manufactured from PET film, the scale remains flexible and resistant to kinking while offering a clear, readable surface; this supports consistent readings when measuring edges, contours or circumferences. As a measuring aid in general metrology and workshop fitting, the product brings a practical compromise between tactile handling and visible precision. Flexible construction that adapts to complex shapes A transparent, rollable design allows the scale to follow curved surfaces and tight radii where rigid rules cannot reach. The slim 25 x 0.1 mm cross-section ensures a low profile that slips into restricted gaps and maintains contact across the measured feature, reducing parallax and enhancing repeatability. Because the material is flexible, the tool is easy to store and transport within a tool kit or drawer, yet robust enough for repeated everyday use in assembly or layout stages. Classification and where it fits in the workshop With a measuring length of 1,000 mm, this product is classified in the large‑range category for workshop measuring aids, bridging the gap between short hand tools and full-length beam systems. Its combination of reach and pliability makes it suitable for layout work on panels, pipe circumferences and model building where a long, conforming scale is required. The fine 0.25 mm graduation supports visual checks and setup tasks without replacing precision instruments used for calibration. Practical benefits and procurement reliability Sourcing from Metav IndustryLine ensures a dependable supply chain and direct access to European fulfilment from Emmerich. The tape combines straightforward usability with measurable benefits: quick deployment for checks, low storage footprint, and a scale that reads more finely than many common workshop tapes. For buyers looking to standardise workshop tooling, the scale is a complementary measuring aid that simplifies routine length and circumference measurements. For order enquiries or to discuss how this Metav IndustryLine measuring tape fits specific workflows, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com — our consultants will advise on suitability and delivery options. Technical data SKU: M203.143 Name: Biegs. Maßstab aus PET-Folien, 100 cm mit 0,25 mm Skalierung Brand: Metav IndustryLine Material: PET film Length: 1,000 mm Scale division: 0.25 mm Cross-section: 25 x 0.1 mm Transparent, flexible design Intended use: distance, length and circumference measurement Facts Measuring range: 1,000 mm Graduation: 0.25 mm Cross-section dimensions in mm: 25 x 0.1 Special features Rollable and compact for easy storage Low-profile edge for gap access Suitable for layout and circumference checks Large-range workshop category (500–1,000 mm) FAQ Is the tape suitable for measuring curved surfaces? Yes. The rollable PET construction allows the measuring tape to conform to curved and irregular surfaces for reliable circumference and contour checks. What resolution does the scale provide and how does that help? The scale features a 0.25 mm graduation, which permits finer visual estimation than 1 mm divisions and aids in precise layout and alignment tasks. Which materials is the tape intended to measure? The tape is a general measuring aid for lengths and circumferences and can be used on metals, plastics and composite parts where a conforming, transparent scale is beneficial. What is the product code for ordering? The product is listed under SKU M203.143 and marketed within the Metav IndustryLine range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Self-Adhesive Scale Tape 13mm Width, Metric Graduation Black/White - Metav IndustryLine
Practical, durable and easy to fit: the combination of a self-adhesive backing and a 1 m, 13 mm band steel profile gives fast, repeatable positioning and clear millimetre measurement. The accuracy class II rating and featherlight construction make this tape an efficient daily tool in the workshop. Order the scale tape directly via Metav Werkzeuge or ask our consultants for application advice. Scale tape M203.170 — Self-adhesive 1 m / 13 mm (Metav IndustryLine) The Scale tape M203.170 is a self-adhesive, millimetre‑graduated steel tape designed for quick marking and short-range measurement tasks in production and workshop environments Self-adhesive steel tape, 1 m length Millimetre graduation in high-contrast black/white 13 mm width for compact marking Accuracy class II for routine workshop use Reliable short-range measuring and marking The self-adhesive measuring strip combines a 1 m measuring range with a narrow 13 mm profile, making it suitable where space is limited and clear millimetre readings are required. Manufactured from band steel, the strip resists common workshop wear and keeps the printed scale legible under frequent handling. The accuracy class II designation places the tape in the standard workshop category for routine checks and marking tasks; it provides predictable results for layout and assembly processes without the complexity of laboratory-grade instruments. Quick application and durable readability A pressure-sensitive backing simplifies attachment: the self-adhesive surface secures the tape to flat substrates, avoiding temporary clamps for short measurements and repetitive marking. The black‑on‑white mm graduation offers high contrast for fast visual alignment and reduces the chance of reading errors under workshop lighting. At just 0.04 kg, the measuring strip is exceptionally light and easy to handle, so it integrates smoothly into existing jigs, templates or operating procedures where a compact, permanent scale is preferred. Practical stock integration and traceability for production use Compact packaging and a recognisable item identity facilitate inventory control: the product is listed as SKU M203.170 with GTIN 4054469181851, which supports traceability in procurement and quality records. Its modest size and durable steel construction make it economical for fitting to machine guards, fixtures or inspection templates where a short, reliable scale is needed. The scale’s design prioritises clarity and repeatability, helping to speed routine marking operations while maintaining consistent measurement references across production batches. Contact Metav Werkzeuge for tailored advice on integrating the M203.170 into existing workflows or to request specification details from our Emmerich team Technical Data Article number: M203.170 GTIN: 4054469181851 Brand: Metav IndustryLine Facts Measuring range: 0–1000 mm Width: 13 mm Weight: 0.04 kg Accuracy: Class II eCl@ss: 21160103 Special features Material: band steel Finish: black/white millimetre graduation Adhesion: self-adhesive backing Category: rulers / scale tape Lightweight and compact design FAQ What is the measuring range of the tape? The measuring range is 0–1000 mm (1 metre); the product is listed as the scale tape M203.170 from Metav IndustryLine. What material and width does the tape have? The tape is made from band steel and has a width of 13 mm with millimetre graduation in black/white. How precise is the scale printing? Marked to accuracy class II, the printed divisions are intended for routine workshop measurement and marking tasks. How is the tape applied to a surface? The strip features a self-adhesive backing for secure attachment to clean, flat surfaces; ensure the surface is dry and free from oil for best adhesion. Which identifiers assist traceability? Traceability is supported by SKU M203.170 and GTIN 4054469181851, useful for stock control and procurement records. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Steel Precision Straightedge, Fully Hardened, Ground And Lapped, Black Oxide Finish, DIN 874/0 - Metav IndustryLine
Benefit from the combination of DIN 874/0 conformity, a 1,000 mm measuring length and fully hardened tool steel for reliable alignment and inspection across large components. Order the Hairline straightedge 1000 mm DIN 874/0 directly via Metav Werkzeuge or consult our specialists for application advice. Hairline straightedge 1000 mm DIN 874/0 — hardened tool steel, ground and lapped A Hairline straightedge 1000 mm DIN 874/0 designed for precise alignment, flatness checks and machine set‑up in workshop and inspection environments. 1,000 mm length for large-format measurements Fully hardened, ground and lapped surface Conforms to DIN 874/0 for precision control Black-blued finish reduces glare and wear Engineered for reproducible alignment and inspection The straightedge is manufactured from tool steel, fully hardened and finished by grinding and lapping to deliver a consistently flat reference edge over its entire 1,000 mm length. Conformity with DIN 874/0 provides an objective benchmark for straightness and flatness, which makes the instrument immediately usable for comparative inspections, run‑out checks and alignment tasks. The combination of a long measuring length and a precision ground face reduces the need for repeated adjustments, improving throughput in quality control routines and minimizing rework. Robust construction that keeps measurements repeatable A substantial cross‑section and the dense material ensure the rule remains stable during handling; the mass of the instrument contributes to measurement stability and reduces vibration during use. The black-blued finish lowers surface glare while offering additional surface protection against light wear, so the reference edge remains legible and usable in daily workshop conditions. These mechanical characteristics translate directly into repeatable results when setting up jigs, checking machine beds or validating straightness over longer components. Designed to fit into professional quality workflows The instrument integrates easily into inspection benches and set‑up stations, serving as a trusted reference for layout, machining checks and assembly control. As a precision tool, it supports systematic procedures: establish the datum with the straightedge, verify with gauges and document results for traceability. Metav’s role as a European quality filter means access to a broad product range and advisory support, ensuring the right variant and preparation for each application. The rule’s robust finish and standardised tolerance class make it well suited to both workshop use and controlled inspection areas. Contact Metav Werkzeuge for availability, bespoke advice and rapid delivery from Emmerich to ensure the right straightedge is specified for the intended inspection task Technical data Article number: M214.028 GTIN: 4054469106212 Standard: DIN 874/0 Facts Length: 1,000 mm Weight: 6 kg Special features Material: tool steel, fully hardened, ground and lapped Finish: black-blued Category: precision straightedge / hairline rule FAQ Is this straightedge suitable for machine-bed alignment? The Hairline straightedge 1000 mm DIN 874/0 is intended for machine‑bed alignment and long‑format straightness checks where a rigid, precise reference is required. What does DIN 874/0 mean for accuracy? DIN 874/0 denotes the tolerance class for straightness and flatness; the 1000 mm Hairline straightedge meets this standard for workshop and inspection comparisons. Can the finish withstand regular workshop use? Yes, the black‑blued finish on the tool steel surface provides improved resistance to glare and light wear, making it suitable for frequent use. Is the rule heavy to handle for single operators? At approximately 6 kg the straightedge benefits from mass‑induced stability; handling may require care, and two‑person handling is recommended for safe transportation and precise placement. What documentation is supplied with the product? Product identification and specification are provided; for additional documentation or certificates, Metav Werkzeuge can advise on any available test reports. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Steel Rule 30x1mm Double-Sided Scales Top 1/2mm Bottom 1mm Stainless Steel - Metav IndustryLine
Take advantage of a robust, workshop-ready stainless steel scale with rigid construction and clear dual graduations to maintain repeatable measurements across long components; order directly via Metav Werkzeuge or consult the Metav team for specification matching. Stainless Steel Scale M214.185 — 1,000 mm rigid ruler, double‑sided graduations (Metav IndustryLine) The Stainless Steel Scale M214.185 is a rigid, long‑range measuring bar for general workshop and heavy‑duty fabrication, offering double‑sided graduations for faster coarse and intermediate readings. Stainless steel construction Rigid execution for stable measuring Double-sided graduations ½ mm and 1 mm 1,000 mm length with 30×1.0 mm cross-section Robust long‑range measurement for heavy components The long, 1,000 mm measuring bar is designed for tasks where profile stiffness and reproducible readings matter. With a 30 × 1.0 mm cross‑section the scale resists bending and vibration better than thin rule blanks, so measurements over a metre retain repeatability even when handled in a busy workshop. The rigid design reduces deflection during alignment and positioning, which improves process reliability for jig and fixture set‑up, sheet‑metal layout and pipe or housing inspections. Clear dual graduations speed up routine checks Employing double‑sided graduations — a half‑millimetre division on the upper edge and a full‑millimetre division on the lower edge — the bar combines fine intermediate reading with fast primary marking. The finer ½ mm marks help estimate half‑step positions without resorting to auxiliary tools, while the 1 mm scale supports quick dimension transfers and layout work. The stainless finish provides a glare‑resistant contrast so markings remain legible under workshop lighting, helping to reduce reading errors and save inspection time. Low upkeep and durable material for daily use Made from stainless steel, the scale resists corrosion and abrasion in machining and fabrication environments, reducing maintenance cycles and ensuring long‑term legibility of the graduations. The simple, solid construction makes it a robust layout tool that requires no calibration routine beyond routine visual checks. Its moderate mass (approx. 0.2 kg) balances handiness with the inertia needed to stay put during marking operations, which benefits one‑person handling on benches and layout tables. For reliable long‑format measurement from a trusted line, contact Metav Werkzeuge to discuss application details or to request the M214.185 as part of a workshop supply package. Technical Data Article number: M214.185 GTIN: 4054469107097 Brand: Metav IndustryLine Material: stainless steel Facts Measuring range: 0–1000 mm Cross-section: 30 × 1.0 mm Length: 1,000 mm Width: 30 mm Thickness: 1 mm Weight: 0.2 kg Tariff number: 90178010 Special features Rigid execution for stable measuring Double-sided graduations: top ½ mm, bottom 1 mm Corrosion-resistant stainless steel finish Category: Lineale (measuring rules) FAQ What applications suit this long stainless steel scale? The stainless steel scale M214.185 (Metav IndustryLine, SKU M214.185) is intended for workshop layout, jig and fixture checks, sheet‑metal marking and other tasks requiring stable long measurements. How does the double‑sided graduation help in daily work? Dual graduations on the M214.185 allow faster coarse measurements with the 1 mm scale and finer intermediate readings using the ½ mm scale, improving marking accuracy without additional tools. Is the material suitable for corrosive workshop environments? Yes, the stainless steel construction of the M214.185 offers good corrosion resistance and maintains legible graduations under normal workshop conditions. Does the rigid cross‑section reduce measurement error over one metre? The 30 × 1.0 mm profile increases stiffness so the scale bends less during handling, which contributes to more reproducible readings across its 1,000 mm length. Can the scale be used for precision metrology tasks? While the M214.185 provides stable, repeatable layout measurements, it is primarily a workshop measuring bar rather than a precision instrument; for metrology applications, purpose‑built calibrated devices are recommended. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Steel Straightedge Hardened, Ground And Lapped, DIN 874/0 - Metav IndustryLine
Take advantage of a fully hardened stainless‑steel reference that delivers stable flatness and long service life; the straightedge's ground and lapped surface and DIN 874/0 conformity ensure repeatable alignment and inspection results. Order this precision tool directly via Metav Werkzeuge for reliable supply and expert advice. Hairline straightedge 1000 mm, stainless (DIN 874/0) — Metav IndustryLine precision straightedge Hairline straightedge is a hardened stainless‑steel reference tool designed for alignment, inspection and visual straightness checks in workshop and metrology environments, compliant with DIN 874/0 Stainless‑steel, fully hardened construction Ground and lapped measurement surface Conforms to DIN 874/0 standard Robust profile for repeatable alignment Flat, wear‑resistant surface for trustworthy reference measurements A straight, stable reference eliminates uncertainty in alignment and inspection tasks. The polished surface, produced by grinding and lapping, reduces microscopic surface variation and wear, maintaining flatness over repeated use. This results in a dependable datum for checking machine beds, guides and assemblies; inspectors and setup technicians profit from fewer rechecks and consistent pass/fail decisions. The stainless construction also lowers corrosion risk in humid workshop conditions. Stable cross‑section for reproducible positioning and reduced measurement error A rigid profile minimises torsion and local deformation, which preserves geometric fidelity when used as a reference. The combination of material hardening and surface finishing leads to improved repeatability during repetitive tasks such as squaring fixtures or inspecting long rails. For production environments where cycle time and traceability matter, the straightedge speeds setup and reduces variability between operators, supporting faster throughput and fewer assembly reworks. Traceable standard compliance that integrates into quality processes Conformity to DIN 874/0 gives a clear specification for tolerance and use as a standard reference, making the tool suitable for incoming inspection, workshop calibration routines and shop‑floor quality checks. The straightedge serves as a stable comparator for visual straightness and parallelism checks, and it fits well into documented inspection procedures that require defined references and reproducible methods. Where documentation and auditability are required, the standardised specification simplifies acceptance and internal quality assurance. Contact Metav Werkzeuge for technical advice or to secure the Metav IndustryLine hairline straightedge for reliable alignment and inspection; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M214.128 GTIN: 4054469163277 Category: Measuring instruments › Lineals Facts Length: 1000 mm Weight: 6 kg Tariff number: 90173000 eClass: 21170120 Special features Material: stainless steel, fully hardened, ground and lapped Standard: DIN 874/0 Purpose: reference straightedge for alignment and inspection Finish: polished measurement surface for low wear and high repeatability FAQ Is the straightedge suitable for workshop inspection and machine setup? The hairline straightedge from Metav IndustryLine is intended for alignment, visual straightness checks and reference inspections in workshop and metrology contexts, offering a hardened, ground and lapped surface for reliable use. What does DIN 874/0 mean for accuracy and use? DIN 874/0 specifies the tolerance class and intended use as a precision straightedge; using a tool that conforms to this standard supports documented inspection routines and consistent comparative measurements. Can the stainless surface resist workshop humidity and light contamination? The stainless‑steel construction combined with the hardened and polished finish provides enhanced resistance to corrosion and surface degradation, helping the straightedge remain a stable reference in typical workshop atmospheres. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Working Rule 40 x 5mm With Millimetre Graduation DIN 866/B - Metav IndustryLine
Take advantage of a robust, workshop-grade measuring rule that combines ground special steel construction with a clear millimetre graduation for reliable, repeatable measurement across long components; order via Metav Werkzeuge or consult the team for purchasing guidance. Working scale 1000 x 40 x 5 mm DIN 866/B — 1,000 mm ground special steel measuring rule with millimetre graduation (Metav IndustryLine) The Working scale 1000 x 40 x 5 mm DIN 866/B is a one-metre, ground steel measuring rule designed for workshop and toolroom use, providing a stable reference length for layout, inspection and setup tasks 1 m length, DIN 866/B compliant Ground special steel construction Millimetre graduation for precise reading Robust design, workshop-ready Precise, repeatable measurements for production control The long, 1,000 mm rule offers a dependable reference for inspection and layout work where consistent dimensional control matters. Manufactured to DIN 866/B, the scale's millimetre graduation provides straightforward, traceable readings that align with common machining tolerances. For quality control and set‑up tasks, a stable measuring baseline reduces rework and helps maintain process capability. The solid, ground profile minimises flex and ensures that repeated measurements along the full length remain comparable, supporting efficient in‑process checks and batch verification. Built for everyday workshop durability and accuracy Constructed from ground special steel, the rule resists wear at the scale face and maintains legibility over prolonged use. The cross section of 40 x 5 mm and an overall weight of 2 kg give the rule the stiffness required for longer runs without excessive bending while remaining manageable for single‑person handling in a machine shop. The robust finish and precise grinding reduce the need for frequent replacement, delivering a reliable tool for routine marking out, jig setting and workshop inspection where surface quality and straightness matter. Clear graduation and simple handling to speed workflows A clean millimetre graduation on a one-metre scale promotes rapid visual checks and shortens inspection cycles compared with fractional or less‑detailed markings. The straightforward graduations simplify communication between set‑up and inspection teams and reduce interpretation errors during transfers from drawing to component. In practice, the rule functions as a practical extension of the machine operator’s toolkit: it is well suited to long‑part layout, checking runout or verifying mounting distances, helping to keep production flowing with fewer measurement interruptions. For reliable, workshop-grade long-scale measurement choose the Metav IndustryLine working scale; contact Metav Werkzeuge in Emmerich for procurement and specialist advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M214.715 GTIN: 4054469109572 Tariff number: 90178010 Facts Length: 1,000 mm Width: 40 mm Thickness: 5 mm Weight: 2 kg Graduation: millimetre Standard: DIN 866/B Special features Ground special steel Millimetre graduation Workshop‑ready rigid profile Category: Measuring rule / Lineal FAQ What standard does this measuring rule conform to? The working scale conforms to DIN 866/B, ensuring the graduation and dimensions meet recognised workshop rule standards for one‑metre steel rules. Is the scale suitable for routine workshop layout and inspection? Yes, the ground special steel construction and millimetre graduation make the scale well suited for routine layout, inspection and set‑up work in machine shops. What are the principal dimensions and weight of the tool? The scale measures 1,000 mm × 40 mm × 5 mm and weighs approximately 2 kg, offering a stiff profile for long‑length measuring tasks. Can this rule be used for calibration or is it solely a layout tool? The rule is intended as a workshop measuring and layout instrument; for formal calibration tasks, reference standards with documented calibration certificates are recommended. What is the item reference for ordering or stock checks? The item is listed as M214.715 (Working scale 1000 × 40 × 5 mm, Metav IndustryLine) Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Rule 40 x 5 Without Bevel - Metav IndustryLine
Reliable long‑reach measurement with robust construction: the 1,000 mm length, special steel material and a 40 mm flat profile combine to give stable, repeatable layout and inspection capability. Order this workshop ruler directly via Metav Werkzeuge or consult our advisors for specification support. Workshop ruler 1000 x 40 x 5 without chamfer (Metav IndustryLine) Workshop ruler 1000 x 40 x 5 without chamfer — a sturdy length gauge for layout, inspection and marking tasks in metalworking and general workshop environments. 1,000 mm measurement length Ground special steel construction 40 mm flat profile for stiffness No chamfer for undistorted edges Long reach and reproducible measurements for heavier components A 1,000 mm measuring span paired with a 40 mm by 5 mm profile offers an excellent balance of reach and rigidity for workshop tasks. The elongated, flat section reduces bending and ensures stiffness over the full length, so linear measurements and layout lines remain consistent across repeated checks. This reduces rework and speeds up set‑ups where a single long rule replaces multiple shorter gauges, benefiting fabrication and machine‑shop workflows by improving throughput and repeatability. Ground finish and material choice that support lasting precision Manufactured from special steel and supplied with a ground finish, the rule resists wear on its measuring edge and keeps graduation marks true for longer service life. Surface grinding yields a flatness that stabilises contact geometry during scribing or inspection, which contributes to overall accuracy in routine checks. For operators who require a robust hand tool that maintains its geometry under frequent use, the combination of material and finish translates directly into fewer calibration interventions and steadier quality control. Practical handling and edge geometry suited to layout work The ruler’s flat profile and the deliberate choice to supply it without chamfer provide an uninterrupted edge for marking and guiding scribes or cutting lines, avoiding offset that can occur with bevelled edges. At approximately 2 kg, the component is manageable for single‑person handling while retaining the mass that limits vibration during marking. Designed as a simple, durable workshop ruler, it is ideal where a reliable straight edge and clear graduations are needed for assembly, inspection or transfer measurements in everyday industrial use. Contact Metav Werkzeuge for a specification match or order guidance and benefit from local stock and practical expertise at the Emmerich location Technical data Article number: M214.705 GTIN: 4054469109503 Dimensions: 1000 x 40 x 5 mm Weight: 2 kg Material: Special steel, ground Tariff number: 90178010 Category: Messgeräte › Lineale Facts Length: 1,000 mm Width: 40 mm Thickness: 5 mm Weight: 2 kg GTIN: 4054469109503 Special features Supplied without chamfer (no chamfered edge) Ground measuring surface Robust workshop design Suitable for layout and inspection tasks FAQ Is the workshop ruler suitable for layout and marking tasks? Yes. The workshop ruler 1000 x 40 x 5 without chamfer is designed with an uninterrupted edge and a flat profile, making it suitable for precise layout and scribing work. What material and finish are used for the rule? The rule is made from special steel with a ground finish, which preserves edge geometry and supports long‑term measurement accuracy. What is the article number and how can it be ordered? The article number is M214.705. Orders and enquiries can be placed via Metav Werkzeuge; the product is listed under the Metav IndustryLine range. How heavy is the ruler and is it easy to handle in the workshop? With a weight of approximately 2 kg, the ruler balances stability and manual handling, remaining practical for most single‑operator layout and inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Rule 40mm Wide, 5mm Thick, Bevel Edge With mm Scale - Metav IndustryLine
Take advantage of the combination of a ground special steel construction, a chamfered edge and clear mm graduations for dependable workshop layout and marking; order the rule directly via Metav Werkzeuge or consult our advisers for specification support. Workshop ruler M214.735 — 1,000 mm steel rule, chamfered with mm graduations (Metav IndustryLine) The Workshop ruler M214.735 is a robust, precision measuring and marking guide designed for everyday layout, scribing and inspection work in metal and general workshops. *1,000 mm steel rule with chamfered edge *Ground special steel for flatness and durability *Metric mm graduations for precise layout *2.0 kg weight for stable bench and hand use Accurate surface and clear graduations for reliable results The ruler is manufactured from ground special steel, a process that creates a consistently flat surface and minimises local deviations that cause measurement error. The mm graduations are clearly scribed for immediate readability during layout and marking; combined with the chamfered edge, this reduces burrs and protects the graduation from premature wear. For workshops where repeatability matters, the combination of a flat measuring face and precise metric divisions speeds up setup and reduces rework. Stable profile and durable construction for daily use A wider profile and a 5 mm thickness contribute to overall stability, so the rule resists unwanted bending during handling or when used as a straight edge. The substantial mass—about 2 kg—helps the rule sit securely on workpieces, reducing movement while scribing or checking alignment. The 40 mm width gives a larger contact area for more consistent results across the length of the tool, making it suitable for repeated use in fabrication, inspection benches and pattern marking. Practical handling, marking and inspection applications The straight, ground face serves as a reliable straight edge for scribing, cutting guides and visual checks, while the chamfer simplifies edge alignment against profiles and prevents catching on rough surfaces. As a metric steel rule, it integrates cleanly into existing workshop procedures for layout, transfer measurements and quick inspection tasks. Its robust finish ensures longevity under workshop conditions and supports rapid, repeatable workflows that save time on every job. Contact Metav Werkzeuge in Emmerich for expert advice and to secure the M214.735 workshop ruler with ground special steel for precise layout tasks Technical data Article number / SKU: M214.735 GTIN: 4054469109718 Manufacturer: Metav IndustryLine Facts Dimensions: 1,000 x 40 x 5 mm Weight: 2 kg Customs tariff number: 90178010 Special features Material: Special steel, ground Chamfered edge Metric mm graduations FAQ What materials is this ruler suitable for marking and checking? The M214.735 workshop ruler is intended for general workshop use and is suitable for layout and marking on metals, composites and many workshop surfaces where a straight, flat reference is required. How does the ground finish benefit measurement tasks? A ground surface improves flatness and reduces local deviations; this means more consistent contact with the workpiece and fewer measurement errors when using the rule as a reference or straight edge. Is the edge protected against wear? The chamfered edge reduces the risk of burr formation and shields the graduation line from direct impact, extending the useful life of the metric mm divisions. Can the ruler be used as a straight edge for cutting guides? Yes, the robust profile and flat contact face make it suitable as a straight edge for marking and as a temporary guide for manual cutting or scribing operations. What distinguishes this workshop ruler from a lightweight scale? The heavier profile and ground special-steel construction of the M214.735 prioritise stability and durability over portability, providing a reference that resists bending and keeps measurements consistent during repetitive tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Ruler With Mm Scale, Anodised Aluminium - Metav IndustryLine
Combine millimetre graduations with an anodised aluminium profile to secure fast, repeatable layout work and minimise handling fatigue thanks to a lightweight design; order via Metav Werkzeuge or consult our specialists for further advice. Workshop Rule M203.055 (Anodised Aluminium, 1,000 mm) The Workshop Rule M203.055 is an anodised aluminium measuring rule with millimetre graduation and a non‑glare finish, built for reliable layout and measurement tasks across general workshop applications Anodised aluminium for corrosion resistance Millimetre graduations for exact layout Non‑glare surface reduces reflections Lightweight yet stable for manual handling Precision for everyday workshop tasks The rule’s millimetre graduations and straight, rigid profile provide a dependable reference for marking and measuring. The anodised aluminium construction combines durability with low weight, so repetitive layout operations remain precise without unnecessary fatigue. In practice, the clear graduations reduce visual strain and speed up dimension transfer between drawing and workpiece, supporting efficient throughput in routine machining and assembly tasks. Practical finish and handling benefits A non‑glare finish enhances readability under workshop lighting and reduces measurement errors caused by reflections. The surface treatment also improves scratch resistance and eases cleaning, prolonging service life in demanding environments. The slim profile ensures good edge contact for accurate scribing, while the low mass allows single‑handed handling for quick checks and line transfers on benches or portable fixtures. Integration into the workplace and quality assurance As a simple, robust measuring tool, this rule supports shop workflows where speed and repeatable references matter more than ultra‑fine metrology. The combination of anodised surface and millimetre scale makes it well suited for layout, carpentry, sheet metal and general fabrication tasks. For buyers seeking a reliable base instrument, the measure serves as a low‑maintenance standard that complements digital calipers and other precision instruments in the toolset. Contact Metav Werkzeuge today for tailored advice on fitting this anodised aluminium rule into production workflows — Metav Werkzeuge can advise on availability and compatibility with existing shop equipment Technical data SKU: M203.055 GTIN: 4054469183381 Material: Aluminium, anodised Finish: Non‑glare / mm graduation Facts Dimensions: 1,000 × 50 × 5 mm (L × W × H) Weight: 0.2 kg Special features Workshop rule (length 1,000 mm) Millimetre graduation Eloxiert (anodised) surface Lightweight design for manual handling FAQ What material is the rule made from? The rule is manufactured from anodised aluminium; the anodised surface gives corrosion resistance and a non‑glare finish for easier reading. Is the scale suitable for precision layout work? Yes, the millimetre graduations on the Workshop Rule M203.055 provide clear, repeatable reference lines suitable for most workshop layout and marking tasks. Can the rule be used in metalworking and carpentry? The anodised aluminium construction and straight profile make this rule versatile for metalworking, carpentry and general fabrication tasks where reliable length references are required. How should the rule be cleaned and maintained? Cleaning with a soft cloth and mild detergent is sufficient; the anodised surface resists corrosion and light wear, aiding long‑term usability. Does the rule require calibration? This workshop rule is a layout instrument; for traceable calibration needs, consult Metav Werkzeuge for suitable precision measuring equipment and services. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Scale 40x5mm Bevelled Edge No Graduation - Metav IndustryLine
Take advantage of a 1,000 mm straightedge that combines ground special steel construction and a precise facetted edge for robust layout work; the non‑graduated surface delivers an unobstructed scribing line and a stable reference for large components. Order the ruler directly via Metav Werkzeuge or consult the team for inventory and technical advice. Workshop ruler 1000 x 40 x 5 mm — Facetted edge, ground special steel (no graduations) | Metav IndustryLine A Workshop ruler 1000 x 40 x 5 mm designed as a stable, non‑graduated straightedge for layout, marking and alignment tasks in machine shops and fabrication work 1,000 mm length for large components Ground special steel for high straightness Facetted edge for precise marking Smooth, non‑graduated surface for scribes Accurate reference for large‑format layout and marking The straightedge’s 1,000 mm overall length provides the reach required for layout on sizable workpieces while maintaining profile stiffness. Manufactured from ground special steel, the rule resists twisting and preserves a true edge across its span; the mass contributes to stable placement during scribing and alignment tasks. The facetted edge acts as a defined marking surface, enabling repeatable lines without the visual clutter of graduations. This construction benefits workshops seeking a reliable, repeatable reference for cutting guides, panel layout and machine set‑up. Clear benefits for precision and shop productivity A non‑graduated design removes potential parallax and marking errors when a continuous straight line is needed rather than incremental measurement. The facetted edge provides a crisp contact line for scribes and pens, while the ground finish reduces burrs and irregularities that could impair accuracy. At approximately 2 kg, the rule balances solidity with manageable handling, reducing the need for constant repositioning and thereby saving time on repetitive marking tasks. For applications where a visual scale is unnecessary, this shop rule simplifies workflows and reduces the risk of misreading scale markings. Handling, maintenance and integration into the workshop Surface treatment and machining ensure a smooth, durable working face that tolerates normal shop use; light wiping and periodic protection from aggressive coolants will extend service life. The straightedge is well suited to clamp mounting or use alongside layout jigs and parallel blocks; the flat, ground underside assists in achieving full‑length contact on flat surfaces. The robust profile also makes the rule appropriate as a temporary guide for cutting or as a screening straightedge during assembly operations. Where traceability or supply queries arise, Metav IndustryLine documentation and stock information are available. Contact Metav Werkzeuge for availability, delivery options and technical clarification on the Metav IndustryLine workshop ruler M214.725 Technical data Article number: M214.725 GTIN: 4054469109640 Tariff number: 90178010 Facts Dimensions: 1000 x 40 x 5 mm Weight: 2 kg Materials and special features Material: ground special steel Edge: facetted edge for precise marking Surface: non‑graduated / without divisions Category: workshop ruler / straightedge SKU: M214.725 FAQ Is the ruler suitable for layout and marking on large panels? Yes. The workshop ruler M214.725 is 1,000 mm long and provides a stable straightedge for panel layout, cutting guides and large‑format marking. Does the rule have any graduations or scale markings? No. The surface of this Metav IndustryLine workshop ruler is non‑graduated, offering a smooth edge intended for scribes and unobstructed marking. What material is used and how does it affect accuracy? Constructed from ground special steel, the rule maintains straightness and resists deformation, ensuring repeatable reference lines across the full length. Is the ruler heavy to handle and how should it be cared for? At approximately 2 kg, the ruler is solid yet manageable; routine cleaning and protection from aggressive fluids will preserve the ground finish and edge integrity. Can the ruler be clamped for fixed layout work? Yes. The flat, ground underside and sturdy profile make it suitable for clamping to benches or jigs to serve as a temporary guide during assembly or cutting operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Glass Rule 0.5mm Graduations 1.5+2L/1000µm Accuracy, Sodium Glass, Supplied In Case - Metav IndustryLine
Take advantage of precise optical checking with a compact, durable soda‑lime glass body and a clear 0.5 mm engraved scale — the combination delivers repeatable microscope verification in a small footprint. Order directly via Metav Werkzeuge or consult our specialists for application advice. Glass ruler – compact verification gauge for microscopes, 130 mm, 0.5 mm scale (Metav IndustryLine) The Glass ruler is a compact verification gauge for microscopes and optical benches, designed for fine visual calibration and routine optical checks in workshops and laboratories. 130 mm total length for compact benches Soda‑lime glass body for stable optics 0.5 mm engraved scale for clear reading Supplied in protective transport box Accurate small‑format verification for optical instruments The measuring strip is engineered for consistent, repeatable checks on optical equipment. With a total length of 130 mm and a fine 0.5 mm scale, this compact gauge provides the reach required for conventional microscope stages while remaining rigid enough for bench use. The specified accuracy expression (1,5+2L/1000) µm gives a transparent statement of measurement behaviour across the length, enabling technicians to assess measurement uncertainty when documenting inspection results. As a micro‑range device (max 100 mm), it fits the typical needs of precision visual inspection and fine mechanical work. Optical stability and easy readability for reliable results Constructed from soda‑lime glass, the rule combines low thermal expansion and good surface stability to maintain its graduation legibility over time. The 0.5 mm engraving is mechanically resistant and contrasts well against a variety of surfaces, which simplifies alignment under low magnification on a microscope stage. These properties reduce rework and shorten inspection cycles by improving the speed and confidence of visual checks. The low mass and flat geometry also help to minimise handling errors during repeated staging operations, supporting consistent outcomes in routine quality control. Compact handling, protected delivery and workshop practicality Weighing just 0.05 kg and measuring 30 mm width with a 5 mm thickness, the instrument is easy to position and store without compromising stability. Delivery includes a protective transport box to safeguard the glass during transit and workshop handling, making it suitable for both production floors and mobile sets. Marked with a clear SKU (M910.521) and GTIN for stock management, the gauge integrates straightforwardly into inspection protocols and documentation workflows, supporting traceability and inventory control. For precise optical verification choose the Metav IndustryLine Glass ruler (SKU M910.521) — contact Metav Werkzeuge in Emmerich for technical advice or to arrange supply: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: M910.521 GTIN: 4061905449000 Manufacturer: Metav IndustryLine Facts Total length: 130 mm Measurement range: 0–100 mm Width: 30 mm Thickness: 5 mm Weight: 0.05 kg Scale: 0.5 mm Accuracy: (1,5+2L/1000) µm Special features Material: soda‑lime glass Micro‑range gauge (max 100 mm) Engraved, corrosion‑resistant graduations Supplied in protective transport box FAQ How is the gauge best used to check a microscope stage alignment? The Glass ruler (Metav IndustryLine, SKU M910.521) is placed on the stage so that the graduations align with the optical axis; observations through the optics verify straightness and parallelism of stage movement. Can the rule be used for measurements other than microscope checks? Yes, the compact format and clear 0.5 mm graduations make the gauge suitable for any small‑format visual inspection or alignment task where a rigid, flat reference is required. What does the accuracy notation mean for practical use? The accuracy (1,5+2L/1000) µm indicates the expected deviation relative to length; it allows technicians to estimate uncertainty for each measurement and to include that value in inspection reports. Is the material suitable for routine workshop environments? The soda‑lime glass construction offers stable optical properties and abrasion‑resistant engravings; the supplied protective transport box reduces risk of damage during regular handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Glass Rule For Microscope Verification, 0.1mm Scale, Soda‑Lime Glass, Supplied In Case - Metav IndustryLine
Take advantage of the combination of high measuring precision, a clear 0.1 mm graduation and a compact 0–100 mm range to speed up optical set‑up and routine checks. Order the item directly via Metav Werkzeuge or contact the consultants for advice on integration into laboratory or workshop workflows. Glass ruler M910.255 — Soda‑lime glass, 0–100 mm measuring range The Glass ruler serves as a compact reference gauge for precise optical alignment and small‑part measurement in laboratories and fine‑mechanical workshops. Soda‑lime glass construction 0.1 mm graduation scale Measurement range 0–100 mm Compact overall length 130 mm High precision that scales with the measured length The instrument offers a specified accuracy of (1.5 + 2L/1000) µm, a formula that indicates how permissible deviation increases with the measured length L; this makes the device particularly suited where repeatable, short‑range checks are required. Made from soda‑lime glass, the ruler provides a stable, flat reference surface with a clear 0–100 mm span and a fine 0.1 mm graduation. Such specification supports efficient optical verification tasks by delivering numerical certainty rather than visual estimation. Compact format for easy handling and rapid checks With an overall length of 130 mm, a width of 30 mm and a thickness of 5 mm, the gauge combines reach and manoeuvrability for everyday use. Its lightweight construction (approx. 0.05 kg) reduces handling fatigue and facilitates quick positioning on stages or small fixtures. The compact form factor suits bench work where space is limited and a short, rigid reference is preferable to longer, more cumbersome instruments. Material and readability designed for measurement routines The choice of glass ensures excellent surface flatness and optical transparency, which helps when aligning measuring microscopes or inspecting small components under magnification. The fine 0.1 mm graduation is ideal for visual comparison and coarse sizing prior to micrometre or caliper follow‑up, providing a reliable intermediate step in quality workflows. The material also allows straightforward cleaning and low sensitivity to marking abrasion, supporting sustained readability in regular use. Practical identification and workshop integration The gauge is supplied with a distinct article code and GTIN for inventory and procurement control, making procurement and stock keeping simple. Integration into existing inspection routines is straightforward: the short measuring range and clear scale support quick decisions during set‑up and first‑article inspections, while the compact design favours storage alongside microscopes and measuring stands. Contact Metav Werkzeuge today to confirm suitability for optical calibration tasks or to request delivery directly from Emmerich. Technical data Article number: M910.255 GTIN: 4061905448997 Manufacturer: Metav IndustryLine Material: Soda‑lime glass Measurement range: 0–100 mm Overall length: 130 mm Width: 30 mm Thickness: 5 mm Weight: 0.05 kg Graduation: 0.1 mm Accuracy: (1.5 + 2L/1000) µm Intended use: Optical alignment, reference measuring Surface: Glass flat reference Packaging: Transport packaging suitable for small instruments Category: Rulers / Lineales FAQ What kind of tasks is this glass ruler best suited for? The glass ruler is ideal for optical alignment, coarse sizing and set‑up checks in laboratories and fine‑mechanical workshops, where a short, flat reference with a 0–100 mm range is required. How precise is the measurement and what does the accuracy formula mean? Accuracy is given as (1.5 + 2L/1000) µm, which means permissible deviation increases slightly with the length L being measured; the specification is intended to clarify expected performance across the working range. Can the ruler be used together with a microscope for calibration checks? Yes, the gauge’s transparent, flat glass surface and fine 0.1 mm graduation make it suitable as a reference for optical checks and alignment procedures under microscopes. How is the item identified for procurement and stock control? The product is identifiable by article number M910.255 and GTIN 4061905448997, facilitating ordering and inventory management. Is the material suitable for routine workshop use? Soda‑lime glass offers good surface flatness and ease of cleaning, providing sustained readability and durability for regular inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Rule Magnifier 10x With Guided Lens Parallax-Free Reading In Case - Metav IndustryLine
Take advantage of compact, workshop-ready precision combined with clear magnified reading and robust stainless-steel construction for dependable small-format measurement. Order the measuring instrument directly via Metav Werkzeuge or consult our specialists for application-specific advice. Measuring Ruler with 10× Magnifier — Metav IndustryLine A Measuring Ruler with 10× Magnifier designed for precise small-format measurements in workshops, inspection benches and fine-mechanical assembly. Parallax-free reading for reliable results 10× magnifier for fine-detail inspection Precision ±0.02 mm accuracy Durable stainless-steel construction Compact precision for fine-mechanical work Designed for tasks that demand exactitude in a small footprint, this measuring magnifier combines a measurement range 0–100 mm with an overall length of 150 mm, placing it in the micro-class for precision instruments. The guided magnifier delivers 10× magnification, which together with the parallax-free reading reduces reading errors and speeds up inspection of small components. The scale division of 0.1 mm provides an intuitive base reading; the stated ±0.02 mm accuracy indicates suitability for detailed quality checks and repeatable production controls in toolrooms, watchmaking and fine assembly. Robust construction that endures workshop use The instrument is made from stainless steel, ensuring resistance to routine workshop wear and moderate corrosion, which supports a long service life under normal industrial conditions. The solid material and compact geometry reduce flexing during handling, maintaining reproducible contact when measuring small parts or features. This mechanical reliability translates into fewer rechecks, faster process cycles and generally more efficient quality assurance on the shop floor. Clear reading and practical handling for everyday inspection The guided magnifier and parallax-compensated scale make visual interpretation straightforward even under workshop lighting; the enlarged view highlights edges and graduations for faster decision-making during inspection and setup. As a compact measuring tool, it is easy to handle and stow, while its accuracy and durable finish ensure it remains a dependable reference for routine checks. The combination of optical assistance and a solid stainless-steel frame delivers both measurement clarity and practical robustness for repetitive tasks. For consistent small-format measurement, contact Metav Werkzeuge in Emmerich for bespoke advice or to purchase the Metav IndustryLine measuring ruler — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M903.205 GTIN: 4061905449086 Category: Rulers Facts Measurement range: 0–100 mm Overall length: 150 mm Magnification: 10× Accuracy: ±0.02 mm Scale division: 0.1 mm Parallax-free reading: Yes Special features Material: stainless steel Guided magnifier Compact micro-range instrument Ideal for fine-mechanical inspection FAQ What measurement range does the instrument cover? The instrument covers a 0–100 mm range, classifying it as a micro-range measuring device suitable for fine-mechanical and small-component inspection. What accuracy and scale resolution can be expected? Accuracy is specified as ±0.02 mm with a scale division of 0.1 mm, while optical magnification aids precise reading of the graduations. Is the tool suitable for daily workshop use? Yes. Constructed from stainless steel, the measuring ruler with magnifier withstands routine workshop handling and is intended for regular inspection and assembly tasks. How does the magnifier improve measurement reliability? The 10× magnifier enlarges scale markings and edges, and combined with parallax-free reading it reduces interpretation errors and speeds up visual inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10x Auxiliary Inspection Loupe - Metav IndustryLine
Take advantage of the combination of 10× magnification and a compact slide-on design to improve scale readability and reduce reading errors; precise results with minimal workflow interruption. Order the Second sliding magnifier directly via Metav Werkzeuge or ask our consultants if needed. Second sliding magnifier — 10× auxiliary magnifier for calipers (Metav IndustryLine) The Second sliding magnifier is an auxiliary optical aid for improving the legibility of vernier and dial graduations on precision measuring tools in workshop and inspection environments. 10× magnification for fine scale reading Compact slide-on mounting for verniers Clear optical contrast for reduced eye strain Read finer graduations with greater confidence A 10× magnification lens provides a clear enlargement of scale markings, allowing finer divisions to be read with reduced ambiguity. This enlargement makes it easier to identify the exact graduation on a vernier or scale, which in turn reduces the likelihood of transcription errors during measurement logging. The optical aid is especially helpful where lighting conditions or small graduations limit visual clarity, supporting consistent precision in routine quality checks. Simple integration into existing measuring setups The accessory is designed for quick retrofitting to compatible measuring slides, offering a discreet, slide-on attachment that does not obstruct normal handling of the gauge. Installation and alignment are straightforward, enabling inspection tasks to continue with minimal interruption. The compact construction keeps the optical element close to the scale, preserving the reading angle and reducing parallax effects that can otherwise introduce small but consequential deviations. Practical benefits across workshop and inspection tasks This auxiliary loupe suits inspection benches, assembly stations and maintenance routines where clear scale reading increases throughput and reduces rework. The device supports faster decisions during measurement sequences and decreases operator fatigue by improving contrast and focus on fine markings. It is provided under the Metav IndustryLine designation M903.209, making it easy to reference when specifying tools or ordering spare accessories. For improved measurement reliability choose the Metav IndustryLine Second sliding magnifier — contact Metav Werkzeuge GmbH in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for product guidance and availability Technical data Article number: M903.209 GTIN: 4061905450051 Manufacturer: Metav IndustryLine Product: Second sliding magnifier Magnification: 10× Facts Magnification: 10× GTIN: 4061905450051 SKU: M903.209 Special features Auxiliary magnifier for calipers and vernier scales Slide-on optical aid for improved readability Suitable for workshop inspection and quality control FAQ Is the magnifier compatible with standard calipers? The Second sliding magnifier is designed as an auxiliary loupe for use with vernier-style and similar scale-based calipers; compatibility depends on the slide geometry of the instrument. Does the magnifier alter the calibration of the instrument? The accessory does not change the measurement datum; it is an optical aid only and does not affect the calibrated condition of the measuring instrument. How does 10× magnification improve measurement results? A 10× lens enlarges scale markings so that smaller graduations can be discriminated more reliably, which reduces reading uncertainty and supports consistent measurement documentation. Which environments benefit most from this magnifier? Inspection benches, assembly stations and any workstation where fine graduations must be read reliably benefit from the improved contrast and reduced eye strain provided by this optical aid. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125 mm Stainless Steel Hairline Rule DIN 874/00 Hardened, Ground and Lapped - Metav IndustryLine
Benefit from the combination of robust stainless-steel construction, precise hairline graduation and DIN 874/00 conformity for reliable workshop measurement. Order the hairline rule directly via Metav Werkzeuge or contact our consultants for application advice. Hairline rule 125 mm (INOX) DIN 874/00 — Metav IndustryLine Hairline rule 125 mm (INOX) DIN 874/00 is a compact stainless-steel measuring instrument for precise layout, inspection and marking tasks in workshops and toolrooms Hardened stainless steel, ground and lapped Hairline graduation for fine measurements Compliant with DIN 874/00 standard Compact 125 mm length for tight spaces Precision that supports reliable decisions This compact instrument delivers consistent, repeatable readings thanks to its stainless steel construction that is fully hardened, then ground and lapped to minimise wear and surface irregularities. The hairline graduation provides clear, fine reference marks that make small adjustments and layout lines straightforward, while conformity to DIN 874/00 ensures the rule meets recognised industrial tolerances. These attributes reduce measurement uncertainty and speed up inspection loops in routine production and quality control. Compact format for tight workspaces and toolroom use At 125 mm, the rule is sized for confined setups where reach must be balanced against stiffness: its short length keeps the profile rigid for precise linear comparisons and marking tasks. The modest weight (0.1 kg) and slim geometry make the instrument practical to handle and position repeatedly without hand fatigue, so small-series assembly, die checks and benchwork benefit from faster cycling times and fewer re-measurements. The clear graduations aid visual alignment and minimise interpretation errors during fast-paced operations. Durable make and traceable identification for workshop logistics Manufactured from hardened, ground and lapped stainless steel, the rule resists corrosion and mechanical wear, extending service life under everyday workshop conditions. Traceability is supported by clear product identifiers such as SKU and GTIN, which simplify stock control and reordering. The combination of robust materials and standardised marking reduces the total cost of ownership by limiting the need for frequent replacements and ensuring consistent measurement quality across multiple workstations. Request a technical consultation from Metav Werkzeuge for application-specific advice or to confirm suitability for specific inspection tasks — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M214.120.2 GTIN: 4054469106694 Label: Haarlineal INOX 125 mm DIN 874/00; 0,1 kg Dimensions & weight Length: 125 mm Weight: 0.1 kg Harmonised system code: 90173000 Materials & features Material: stainless steel, fully hardened, ground and lapped Standard: DIN 874/00 Category: Lineal FAQ What standard accuracy does this rule meet? The hairline rule conforms to DIN 874/00, providing standardised tolerances suitable for workshop and inspection tasks. What is the rule made from and how does that affect durability? This instrument is made from stainless steel that is fully hardened, then ground and lapped, giving enhanced wear resistance and long-term dimensional stability. Is the 125 mm length suitable for fine mechanical work? Yes, the 125 mm format is ideal for confined workspaces and fine layout tasks where stiffness and repeatability are priorities. How can the product be identified for ordering or inventory? Order and inventory entries can use SKU M214.120.2 and GTIN 4054469106694 to ensure the correct hairline rule is supplied. Can this rule be used in production and quality control environments? The rule’s hardened, ground and lapped finish and DIN 874/00 conformity make it well suited for routine production checks and toolroom inspection Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm Hairline Ruler Black Oxide Finish DIN 874/00, Hardened Tool Steel - Metav IndustryLine
Take advantage of the combination of a compact 125 mm working length, hardened tool-steel construction and conformity with DIN 874/00 for a stable reference edge that supports precise layout and inspection tasks; order the hairline ruler directly via Metav Werkzeuge or consult our specialists for technical advice. Hairline ruler 125 mm DIN 874/00 — hardened tool-steel precision rule (Metav IndustryLine) A Hairline ruler 125 mm DIN 874/00 is a compact, hardened tool-steel precision rule intended for workshop measuring, layout and inspection where a stable straight reference is required Hardened, ground and lapped tool steel Complies with DIN 874/00 Compact 125 mm length for fine work Stable reference for fine measurement and layout The compact straightedge is engineered as a precision reference for small components and quick verification tasks. Made from tool steel, fully hardened, ground and lapped, the blade gives a reliably flat datum that reduces measurement uncertainty during visual inspection and scribing. The short 125 mm length combines rigidity with manoeuvrability, making the rule suitable for tool room checks, quality-control benches and fine mechanical workshops. The blackened finish protects the metal surface and improves contrast against engraved or scribed lines, which supports faster, more confident alignment during repetitive tasks. Robust construction for repeatable results in daily use Durability is central to repeatability: the raw material and finishing steps ensure the reference edge resists wear and remains true under normal workshop handling. The hardened tool-steel construction resists nicks and deformation while the ground and lapped surfaces deliver a refined edge suitable for comparative inspection. As a result, the rule performs consistently when used for layout, edge checking or as a sighting aid on small assemblies. The light weight of around 0.1 kg and the compact size facilitate quick transfers between benches and reduce operator fatigue during frequent checks. Practical handling, measurement workflow and care Integration into everyday procedures is straightforward: the precision blade serves as a visual and physical guide for marking, aligning optical measuring devices or verifying straightness. The rule’s size and finish make it well suited for tasks where a full-length straightedge would be unwieldy. Maintenance is minimal — keep the edge free of chips and contamination, store in a protective sleeve or drawer to preserve the lapped surface, and avoid corrosive agents to maintain the blackened finish. For structured inspection routines the rule can be paired with magnified scales or microscopes for improved visual resolution during fine layout operations. For reliable workshop precision choose the Metav IndustryLine hairline ruler—contact Metav Werkzeuge for current availability and delivery from Emmerich Technical data SKU: M214.020.2 GTIN: 4054469106090 Category: Rulers Facts Length: 125 mm Weight: 0.1 kg Tariff code: 90173000 Materials & special features Material: tool steel, fully hardened, ground and lapped, blackened Standard: DIN 874/00 FAQ What is the hairline ruler best used for? The hairline ruler 125 mm DIN 874/00 is designed for fine layout, reference checks and short-range straightness verification in tool rooms and inspection benches. How does the material and finish affect performance? The tool-steel construction, being fully hardened and ground and lapped, provides a wear-resistant reference edge; the blackened finish reduces glare and helps protect against surface corrosion. Is this rule suitable for visual inspection with magnification? Yes — the compact, stable blade is well suited as a datum for magnified visual comparison and fine scribing work where a short, rigid reference is advantageous. How should the ruler be cared for to maintain accuracy? Keep the edge free from nicks and debris, avoid corrosive cleaners, and store the rule in a protective sleeve or drawer to preserve the lapped surface. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150 mm Steel Scriber Rule Blackened, Hardened and Ground According to DIN 874/00 - Metav IndustryLine
Take advantage of the combination of DIN‑standard precision, hardened tool steel construction and a fine hairline edge to speed up layout work and reduce rework. Order the ruler directly via Metav Werkzeuge or contact our advisers for specification guidance. Hairline ruler M214.021 – 150 mm, hardened tool steel (Metav IndustryLine) The hairline ruler M214.021 is a DIN‑874/00 length gauge and scribing aid designed for precise layout and inspection tasks in workshops and toolrooms. DIN 874/00 standard for workshop metrology Fully hardened, ground and lapped tool steel Fine hairline edge for accurate scribing and layout Blackened finish reduces reflections and wear Consistent layout precision for everyday metrology The finely finished hairline edge and adherence to DIN‑874/00 ensure repeatable marking and measurement across routine production tasks. The short 150 mm length provides a balance between reach and rigidity, making it suitable for bench work and small assemblies where uncontrolled flex would reduce accuracy. The result is fewer setup errors and more efficient first‑time fits, supporting measurable improvements in throughput. Robust construction that withstands workshop use Manufactured from fully hardened, ground and lapped tool steel and treated with a blackened finish, the gauge resists abrasion and glare while maintaining a crisp reference edge. This construction translates into long service life under normal workshop conditions and fewer replacements over time. The hardened surface reduces burr formation during scribing, which helps keep tolerances stable and inspection effort minimal. Practical benefits in layout and inspection workflows Compact and straightforward, the ruler integrates easily into standard inspection routines and layout jigs. The plain scale and hairline scribing capability reduce the need for auxiliary marking tools, improving ergonomics and cycle time for repetitive tasks. Where visual contrast is important, the blackened surface improves sighting against bright materials, while the hardened substrate preserves the measuring edge for consistent results. Choose the Metav IndustryLine hairline ruler for precise, durable layout performance and consult Metav Werkzeuge in Emmerich for availability or product matching: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M214.021 GTIN: 4054469106106 Standard: DIN 874/00 Material: tool steel, fully hardened, ground and lapped, blackened Length: 150 mm ECLASS: 21170120 Tariff number: 90173000 Facts Length: 150 mm GTIN: 4054469106106 ECLASS: 21170120 Tariff: 90173000 Special features Blackened finish for reduced reflection Fully hardened, ground and lapped tool steel Fine hairline edge for scribing and layout Conforms to DIN‑874/00 SKU: M214.021 FAQ What applications is this hairline ruler suitable for? The hairline ruler M214.021 is intended for precise layout, scribing and short‑range measuring tasks in workshops, toolrooms and inspection benches. Is the material suitable for heavy workshop use? Yes, the gauge is made from fully hardened tool steel, ground and lapped to maintain a sharp reference edge under normal workshop conditions. How does the blackened finish help during use? The blackened finish on the ruler reduces reflections and improves contrast when sighting the hairline edge against bright or polished parts. Does the ruler comply with recognised standards? The product conforms to DIN‑874/00, ensuring standardised dimensions and reliable reference behaviour for workshop metrology. Can the ruler be used for scribing directly onto workpieces? The fine hairline edge of the M214.021 is designed for accurate scribing; the hardened surface minimises wear and burr formation during marking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1500mm Assembly Square Double‑T Aluminium‑Magnesium Alloy With Relief Holes, Grade 1 - Metav IndustryLine
Taking advantage of a lightweight aluminium‑magnesium alloy and a 1500 mm effective length, this assembly rule delivers Grade 1 planar accuracy and consistent reference surfaces for fixture set‑up, alignment and large‑format assembly tasks. Order directly via Metav Werkzeuge or contact our advisors for specification matching. Assembly rule M214.746 — Grade 1, 1500 mm aluminium‑magnesium The Assembly rule M214.746 is an industrial‑grade alignment straightedge designed for precise positioning and reliable reference across medium‑to‑large assemblies. Grade 1 dimensional accuracy 1500 mm effective length Aluminium‑magnesium construction Integrated relief holes for mounting Engineered precision that speeds set‑up and reduces rework The combination of Grade 1 manufacturing and a guaranteed flatness 0.017 mm gives a stable reference for alignment and inspection tasks. This level of planarity minimises adjustment cycles on jigs and fixtures, so production processes become more predictable and efficient. The straightedge acts as a reliable datum for machining set‑ups and assembly benches where reproducible positioning is essential. Stiffness matched to practical handling A measured weight 4.56 kg over the 1500 mm length balances rigidity and manoeuvrability; the profile provides the stiffness required for long runs while remaining manageable during installation. The 100 mm overall height and 40 mm width contribute to a low bending tendency under normal workshop handling, which supports repeatable measurements and alignment without cumbersome lifting equipment. Material performance that sustains accuracy Made from aluminium‑magnesium alloy, the rule combines low mass with predictable mechanical behaviour: yield strength 110 kg/mm², tensile strength 47 kg/mm² and hardness HV 80. These properties reduce the risk of permanent deformation in everyday workshop use and help preserve reference surfaces after repeated mounting or light knocks. The alloy choice also simplifies handling and transport compared with heavier steel alternatives. Practical details for integration into fixtures Built‑in relief holes allow secure fastening to assembly tables, templates or jigs without compromising the reference edge. The specified parallelism 0.022 mm ensures that the opposing faces remain consistent over the length, which is vital for clamping and multi‑point supports. Delivered as a ready‑to‑install straightedge, it fits common fixture workflows in toolmaking, assembly and quality control applications. For specification advice or to reserve a unit of the Metav IndustryLine assembly rule, contact Metav Werkzeuge for tailored guidance and prompt supply from Emmerich. Technical Data Article number: M214.746 GTIN: 4054469184531 Manufacturer: Metav IndustryLine Core specifications Overall length: 1500 mm Overall height: 100 mm Width: 40 mm Weight: 4.56 kg Flatness: 0.017 mm Parallelism: 0.022 mm Hardness: HV 80 Yield strength: 110 kg/mm² Tensile strength: 47 kg/mm² Special features Material: Aluminium‑magnesium alloy Grade: Güte 1 (Grade 1) Relief holes for mounting Category: Ruler FAQ What accuracy class does the rule meet? The assembly rule meets Grade 1 tolerance and is specified with a flatness of 0.017 mm and parallelism of 0.022 mm, providing a precise reference for alignment and inspection tasks. Is this straightedge suitable for fixture alignment on large assemblies? Yes — the Assembly rule M214.746 with its 1500 mm length and engineered stiffness is intended for positioning, jig alignment and assembly tasks where a long, stable datum is required. What material is the rule made from and how does it behave mechanically? Constructed from an aluminium‑magnesium alloy, the rule offers low weight with defined mechanical properties: yield strength 110 kg/mm², tensile strength 47 kg/mm² and hardness HV 80, ensuring durability and resistance to permanent deformation in daily workshop use. How can the rule be secured within a fixture or on a bench? The rule includes relief holes for direct mounting, allowing secure fastening to tables, templates or jigs without affecting the primary reference edges. Which industries or applications is this product aimed at? The product is suitable for toolmaking, fixture construction, assembly lines and quality control where a long, accurate reference is needed for alignment and measurement. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1500mm Flexible PET Measuring Tape 0.25mm Graduation, Transparent Film Tape - Metav IndustryLine
Take advantage of the combination of flexible PET construction, a fine 0.25 mm graduation and a slim cross‑section to measure long spans with clear, repeatable results; order the flexible PET film scale directly via Metav Werkzeuge or ask our consultants if needed. Flexible PET Film Scale 150 cm — 0.25 mm graduation (Metav IndustryLine) A Flexible PET Film Scale 150 cm designed for measuring distance, length and circumference where a transparent, pliable measure is advantageous in workshops and on-site layout tasks. Transparent, flexible PET film construction Fine 0.25 mm graduation for precise layout 150 cm length for long-span measurements Slim 25 × 0.1 mm cross-section, easy storage Precise long-span layout with fine 0.25 mm graduations The flexible film measure delivers reliable linear readings thanks to its 0.25 mm graduation, which permits detailed marking and transfer of dimensions during layout and pattern work. The clear graduations reduce interpolation error and speed up repetitive tasks, making the tool suitable for technical drawing, textile layout or any application that requires accurate spacing over long spans. The combination of fine scaling and transparent material supports efficient alignment against complex contours and printed guides. Durable PET construction that adapts to complex shapes Manufactured from transparent PET plastic, the measure combines pliability with dimensional stability: the strip conforms to curved profiles while maintaining readable markings. The slim 25 × 0.1 mm cross‑section keeps the weight and bulk minimal for easy handling and storage, yet the film resists common workshop wear when used sensibly. Because the material is transparent, underlying markings remain visible during measurements, which accelerates transfer tasks and reduces handling steps compared with opaque tapes or rigid rulers. Reach and handling tailored for longer components With a measuring range of 1,500 mm (150 cm) this flexible scale falls into the Long category (1,000–2,000 mm), offering the reach required for longer components while remaining manageable by one person. The length is especially practical for carpentry patterns, sheet material layout and measuring circumferences on pipes or ducts where a rigid rule would be impractical. For operations that combine on‑bench and on‑site measurements, the film measure provides a lightweight, low-storage alternative that keeps workflows smooth. For long-span layout tasks and reliable fine graduations, contact Metav Werkzeuge in Emmerich to order the Flexible PET Film Scale 150 cm or request technical advice at info@metav-werkzeuge.com — phone +49 2822 7131930 Technical data Article number: M203.144 Manufacturer: Metav IndustryLine Product: Flexible PET film scale, 150 cm, 0.25 mm graduation Core specifications Measuring range: 1,500 mm Length: 150 cm Graduation: 0.25 mm Cross‑section: 25 × 0.1 mm Features & materials Material: PET plastic, transparent and flexible Measures: distance, length, circumference Slim profile for easy storage Suitable for long‑span layout work FAQ What materials is the scale made from and how does that help in use? The Flexible PET Film Scale 150 cm is made from transparent PET plastic, which provides flexibility for wrapping around curves and clear visibility of underlying marks, aiding precise transfer of dimensions. How accurate is the graduation and what tasks is it suited to? With a 0.25 mm graduation the scale supports fine layout and marking tasks, suitable for textile work, pattern making, carpentry templates and other applications requiring detailed spacing. Is the 150 cm length practical for workshop and on-site use? Yes — the 1,500 mm measuring range places the tool in the Long category (1,000–2,000 mm), giving reach for larger components while remaining lightweight and easy to carry. How should the strip be stored to retain accuracy? Store the film flat or rolled loosely to avoid permanent kinks; the slim 25 × 0.1 mm profile means it fits easily into drawers or tool rolls, reducing the risk of damage in daily use. Which Metav product code identifies this item? The item is listed under SKU M203.144 and can be referenced in orders or enquiries for quick identification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Accurate checks with precision straightedges
Precision straightedges are high-accuracy measuring tools designed to verify flatness and straightness across surfaces. Available in several lengths and finished from durable metals, these instruments provide a simple, repeatable method for alignment and inspection in industrial settings.
How precision straightedges work and where they are used
A precision straightedge is laid against a surface to reveal deviations from true flatness or a straight line, with fine graduations enabling careful assessment of run-out and planar error. Typical applications include mechanical engineering, electronics, optics and microscopy, machine tool build and quality control, where reliable visual or feeler-gauge inspection prevents assembly issues and functional failure.
Key advantages that cut waste and speed up production
- high accuracy and stable construction reduce measurement uncertainty and help maintain production tolerances.
- stainless steel or other precision metals ensure long service life and corrosion resistance.
- fine graduations and etched scales allow precise readings and repeatable checks.
- various lengths suit bench work as well as larger components, shortening setup time.
- simple handling lowers inspection time and contributes to fewer rejects and rework.
Why Metav is the practical choice for precision straightedges
Metav combines decade-long expertise with a broad range of measurement tools, making it a pragmatic partner for workshop and production buyers. With over 48,000 customers and a catalogue exceeding 250,000 products, Metav operates from Emmerich as a quality filter for the european market, offering consistent availability and straightforward order processing. For those seeking a reliable source of precision straightedges and complementary measuring instruments, Metav’s range and technical information help select the correct specification for the intended inspection task.
In brief
Precision straightedges deliver fast, reliable assessments of flatness and straightness across industries, improving quality control and reducing scrap while being simple to use and maintain.
FAQ
What materials are precision straightedges typically made from?
Precision straightedges are commonly manufactured from stainless steel or other precision metals to ensure stability, wear resistance and longevity in industrial use.
In which industries are precision straightedges most valuable?
Precision straightedges are widely used in mechanical engineering, electronics, optics and microscopy, machine tool construction and general quality control where geometric accuracy is critical.
How is a precision straightedge used to check flatness?
Place the precision straightedge on the surface and inspect gaps visually or with feeler gauges; fine graduations and a straight reference edge make deviations from flatness evident for correction or further machining.
Are different lengths available for precision straightedges?
Yes, precision straightedges are offered in various lengths to match bench-top inspections as well as larger component checks, allowing selection of the most efficient tool for each application.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com