Precision rulers for accurate alignment
Precision rulers are specialised measuring tools used to check flatness and straightness in metalworking and inspection processes, providing reliable alignment and verification for assemblies and machined surfaces. They are typically made from stainless steel or precision metals and serve machining, optics, electronics and quality control applications where tight tolerances are required; using a precision ruler improves repeatability and reduces non‑conformances. Common synonyms include straight edge and flatness gauge, and the durable construction alongside fine graduations ensures the tool remains accurate over years of workshop use.
500mm Working Scale With Mm Graduation, DIN 866/B - Metav IndustryLine
Take advantage of a DIN 866/B‑compliant measuring rule made from ground special steel with a clear mm graduation and a stable 500 mm profile for reliable layout and inspection work; order directly via Metav Werkzeuge or consult the technical team for specification support. Working steel rule 500 x 40 x 5 mm DIN 866/B (mm graduation) — Metav IndustryLine The Working steel rule 500 x 40 x 5 mm DIN 866/B is a robust, workshop‑grade ruler designed for precise linear measurement, marking and quality checks across metalworking and general fabrication tasks. DIN 866/B compliant rule Ground special steel construction Precise mm graduation 500 mm working length, stable profile Reliable standard compliance for repeatable results Built to DIN 866/B, this steel rule gives a verifiable basis for routine measurement tasks and shop inspection. The mm graduation is machined for clarity and repeatability, supporting accurate marking and rapid visual checks. As a standardised item, it integrates easily into inspection routines and technical documentation, reducing interpretation errors and supporting consistent production quality. Durable construction that keeps its edge The rule's special steel substrate is ground to a fine finish, which improves wear resistance and reduces the risk of surface deformation during daily use. This stability matters when measurements must remain consistent over time: the hardened and ground face preserves the graduation and resists nicks from tool contact. The result is lower replacement frequency and dependable performance in a busy workshop environment. Practical handling and workshop applications With a 500 mm working length and a 40 mm wide profile, the scale balances reach and stiffness for layout, scribing and quick inspection tasks. The robust profile reduces flex when laying the rule across parts, improving measurement reliability on flat components and assemblies. Suited to general fabrication, maintenance, and setup work, the steel rule is a compact tool that complements vernier and digital instruments for daily shop use. For DIN 866/B precision and dependable supply, contact Metav Werkzeuge in Emmerich for tailored advice and procurement. Technical data SKU: M214.712 GTIN: 4054469109541 Tariff number: 90178010 Core technical data Dimensions: 500 x 40 x 5 mm Weight: 0.8 kg Special features Material: Special steel, ground Standard: DIN 866/B Graduation: mm division FAQ What is the exact length and profile of the rule? The working steel rule is 500 x 40 x 5 mm (SKU M214.712), offering a stable profile suited to layout and inspection tasks. Which standard does this rule comply with? This rule conforms to DIN 866/B, ensuring measurement consistency in workshop and inspection settings. What material and finish are used for the scale? Manufactured from ground special steel, the scale provides wear resistance and a consistently legible mm graduation. Is a calibration certificate supplied with the rule? No specific calibration certificate is detailed for this working steel rule; its conformity to DIN 866/B defines its measurement standard. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Workshop Rule 40mm Width, Bevelled Edge, Millimetre Graduation - Metav IndustryLine
The combination of a 500 mm measuring length, ground special-steel construction and a facetted edge ensures reliable, repeatable workshop measurements and long‑term durability; order this robust workshop rule directly via Metav Werkzeuge or contact our consultants for tailored advice. Workshop rule M214.732 — 500 x 40 x 5 mm, facetted edge, millimetre graduations (Metav IndustryLine) The Workshop rule M214.732 is a 500 mm long, 40 mm wide, ground special‑steel measuring rule with a facetted edge and clear millimetre graduations, engineered for routine workshop measurement and layout tasks across metalworking and general fabrication. 500 mm length, 40 mm width Ground special-steel construction Facetted edge for precise alignment Clear millimetre graduations Precision where it matters: consistent, measurable results A straight measuring bar gives a predictable baseline for layout and inspection; the 500 mm length provides a practical balance between reach and stiffness for most workshop tasks. The ground special steel surface reduces surface irregularities that can alter readings, so measurements remain consistent over repeated use. Millimetre graduations are laser‑sharp and easy to read, supporting rapid decisions on the shop floor and reducing rework. The measurable nature of the rule supports traceable work practices and straightforward integration into quality processes. Built for daily use: durability and handling benefits The rule’s ground finish and engineered profile deliver robustness in a compact form. The 40 mm width improves handling and prevents excessive bending during marking or when used as a straight edge. The facetted edge is hardened by the manufacturing process to maintain a crisp corner for scribing and alignment, which helps keep layout marks accurate and durable. These hardware choices mean less time replacing worn tools and more predictable production throughput, contributing directly to operational efficiency. Practical advantage of the facetted edge and graduation layout A facetted edge simplifies visual alignment and creates a small, repeatable contact line when scribing or checking edges; this is particularly useful when transferring datum lines across parts. Clear millimetre graduations with a vivid contrast reduce reading errors and speed up multiple measurements. For non‑specialists, “facetted edge” denotes a bevelled or chamfered border that gives a precise point of contact rather than a blunt surface, improving repeatability in everyday marking and measuring tasks without extra training. Typical uses and who benefits most The workshop rule suits machinists, fabricators, toolmakers and maintenance technicians who require a rugged, accurate straight edge for layout, marking and quick checks. Its dimensions and finish make it ideal for general metalworking, sheet fabrication and workshop assembly where a dependable, easy‑to‑read rule improves both speed and confidence. The compact size also fits into tool drawers and portable kits for mobile maintenance teams, offering a straightforward, low‑complexity solution that supports reliable results. For robust, workshop‑grade measurement choose the Metav IndustryLine workshop rule and contact Metav Werkzeuge in Emmerich for technical advice and reliable supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M214.732 GTIN: 4054469109688 Dimensions: 500 x 40 x 5 mm Material: Special steel, ground Label: Workshop rule 500 x 40 x 5 mm, facetted edge, mm graduations Core specifications Length: 500 mm Width: 40 mm Thickness: 5 mm Tariff number: 90178010 eClass: 21170122 Features & finish Ground surface finish Facetted (bevelled) edge for alignment Millimetre graduations Category: Rulers / Lineale Brand: Metav IndustryLine FAQ What materials is the rule made from and how is it finished? The Workshop rule M214.732 is manufactured from special steel with a ground surface finish, providing a flat and durable measuring face suitable for workshop use. Is the 500 mm length suitable for general workshop layout? Yes, the 500 mm length on this workshop rule strikes a balance between reach and stiffness, making it a practical choice for most layout, marking and inspection tasks. How does the facetted edge improve measurement and marking? The facetted edge produces a defined contact line for scribing and alignment; on the Workshop rule M214.732 this increases repeatability and reduces parallax when transferring datum lines. Does the rule include clear graduations for fast reading? The rule features precise millimetre graduations with high contrast engraving to support quick, reliable readings in busy workshop environments. Which professions or applications benefit most from this rule? Machinists, fabricators, toolmakers and maintenance technicians will find the rule useful for layout, marking, quick checks and as a reliable straight edge in fabrication and assembly tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500x40x5 mm Workshop Rule Ground Steel, Polished - Metav IndustryLine
Take advantage of the combination of a 500 mm measuring length, ground special steel construction and a flat 40 x 5 mm profile for stable, repeatable layout work; order the tool directly via Metav Werkzeuge or consult the team for application advice. Workshop ruler 500 x 40 x 5 — flat steel rule for robust workshop layout (Metav IndustryLine) The Workshop ruler 500 x 40 x 5 is a flat steel rule designed for precise marking and measuring in metalworking, fabrication and general workshop use. 500 mm length for extended reach Ground special steel surface for durability Flat profile 40 x 5 mm for stable measurements No chamfer for full-length reference edge Precision and a reliable reference edge for layout work The flat, ground special steel construction offers a consistent, wear-resistant measuring surface that supports accurate marking and repeatable checks. With a full length of 500 mm and a profile of 40 x 5 mm, the rule provides a rigid reference that resists bending during hand-held use, which is essential when transferring lines across plates or setting out assemblies. The absence of a chamfer means the full edge can be used as a datum, simplifying tasks where a continuous reference is required. The combination of a ground finish and stable cross-section reduces edge wear and maintains measurement integrity over long service intervals. Designed for dependable handling and workshop efficiency The flat geometry and modest mass (approximately 0.8 kg) deliver a balance between heft for stability and manoeuvrability for frequent use. The 40 mm width increases contact area, improving lateral stability when scribing or checking straightness on components. Classified for large-format workshop measuring at the 500 mm range, this tool suits layout work on medium-sized parts, jigs and fixtures where a robust, easy-to-read reference rule speeds up production tasks. The ruled profile lends itself to repeatable marking and quick comparative measurements without the need for complex setups. Built for durability and smooth integration into the workshop A ground surface finish provides resistance to abrasion and straightforward cleaning after cutting or filing operations, extending service life and reducing downtime for maintenance. The robust build aligns with Metav’s approach to accessible precision: durable tools that suit both industrial environments and busy workshops. As a straightforward steel rule, it integrates seamlessly into standard layout kits and tool stations, offering a low-complexity solution for repeatable results and clear reference lines across common fabrication applications. For robust, accurate layout tasks choose the Metav IndustryLine workshop ruler—contact Metav Werkzeuge in Emmerich for specification details or purchasing guidance at info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M214.702 GTIN: 4054469109473 SKU: M214.702 Facts Length: 500 mm Cross section: 40 x 5 mm Weight: 0.8 kg Tariff code: 90178010 Special features Material: ground special steel No chamfer (full-length reference edge) Category: Rulers / Lineale FAQ Is this ruler suitable for heavy fabrication layout work? The workshop ruler 500 x 40 x 5 from Metav IndustryLine is intended for medium to large workshop tasks; its 500 mm length and flat 40 x 5 mm profile provide the stiffness required for reliable layout on many fabrication jobs. Can the rule be used as a datum edge for repeated scribing? Yes. The absence of a chamfer gives a continuous reference edge that is suitable for repeated scribing and transfer marking with consistent results. What material is the ruler made from and how does that affect durability? Manufactured from ground special steel, the ruler resists abrasion and maintains edge integrity over prolonged use, reducing the need for frequent replacement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50m Capsule Tape Measure 13mm Blade 2 Mm/cm Start A - TECWERK
Benefit from long-range measuring capability combined with a stable, narrow blade and precise metric graduation for efficient site work and repeatable results — order the TECWERK tape measure directly via Metav Werkzeuge or ask our consultants if needed. TECWERK 50 m capsule tape measure — 13 mm blade, 2 mm/cm graduation The TECWERK capsule tape measure offers a resilient measuring solution for construction, surveying and workshop tasks where long reach and clear metric markings are required. 50 m measuring length for long runs 13 mm wide blade for stable unwinding 2 mm/cm metric graduation for precise readings ABS case with nylon-fibre blade for durability Extended reach with controlled blade behaviour for faster workflows The 50 m blade delivers long measuring ranges without the need for splices or additional tapes, reducing handling time on larger jobs. The relatively narrow 13 mm blade improves roll-up precision and minimises oscillation when extended, which keeps measurements steady on ladders and scaffolding. This combination reduces retracing and re-measuring, supporting faster task completion and fewer material interruptions while maintaining a professional pace on site. Clear metric graduation that supports reliable results The 2 mm/cm division provides five clear marks per centimetre, enabling straightforward interpolation between centimetre values and improved repeatability for routine layout work. With the tape classified as Class II, users can rely on industry-standard tolerances for many trade applications. The graduation scheme is particularly useful where quick, unambiguous readings are required under time pressure, translating technical specification into consistent on-the-job accuracy. Robust materials that resist workshop wear and extend service life A tough ABS case protects the reel mechanism from knocks and drops, while the nylon-fibre coating on the blade adds abrasion resistance and reduces reflective glare when reading the scale. The reinforced construction lowers the likelihood of blade deformation and helps preserve the printed graduation over repeated use. The measured band start is prepared as a factory-specified beginning (measure start A), ensuring repeatable reference points for integration with templates and jigs. Practical handling features to integrate into daily operations The compact capsule design combines compact storage with quick deployment, so frequent measuring tasks become less disruptive to workflow. The stable blade profile and clear markings support fast visual checks and transfer measurements directly to drawings or cut lists. For teams that value predictability, the tape’s balanced handling reduces small errors that accumulate over multiple measurements, helping to maintain quality across a project without adding complexity to routine procedures. For robust, long-range measuring with proven material endurance, contact Metav Werkzeuge for tailored advice and supply options — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the TECWERK tape measure and logistics from Emmerich Technical data Article number: 2000855807NW Description: Capsule tape measure, 50 m Manufacturer: TECWERK Packaging unit: 1 Facts Length: 50 m Blade width: 13 mm Graduation: 2 mm/cm SKU: 2000855807NW Special features ABS case Nylon-fibre coated blade Measurement start: A Accuracy class: EG II FAQ What environments is this tape suitable for? The TECWERK capsule tape measure is suitable for construction sites, workshop floors and general trade use where long-range metric measurement and robust handling are required. How fine are the graduations on the blade? The tape features a 2 mm/cm metric graduation, providing five markings per centimetre for clear interpolation and repeatable readings. Does the tape resist abrasion and glare? Yes — the blade is finished with a nylon-fibre coating that improves abrasion resistance and reduces reflective glare under bright conditions. What does the measurement start “A” indicate? Measurement start A denotes the factory-configured band beginning, enabling consistent reference points when aligning the tape with edges or templates. Is the accuracy standard suitable for trade work? The blade is marked to Class II (EG II) tolerances, which are appropriate for many professional trade and construction applications. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
50m Ergoline Frame Tape Measure 13mm Band Width Mm/Cm A Start Aluminium White Steel BMI
Take advantage of the combination of long-range measurement, durable construction and clear graduations for reliable site and workshop work; order the ERGOLINE frame tape measure directly via Metav Werkzeuge or ask our consultants for application advice. ERGOLINE frame tape measure – 50 m, 13 mm tape width (BMI) ERGOLINE is a robust frame tape measure designed for long-distance measurement tasks on site and in the workshop, combining a compact aluminium frame with a steel measuring tape and clear mm/cm graduations. 50 m measuring length 13 mm tape width for stability mm/cm graduation for precise reads Aluminium frame with white finish Long-range measurement that stays accurate on every job The 50 m measuring length allows for extended runs without repositioning, reducing measuring time on building sites and large assemblies. The tape’s mm/cm graduations provide familiar, machine-readable subdivisions, so dimensioning and transfer measurements remain precise. Thanks to the reinforced steel tape, the measuring element resists bending and wear during repeated use, which supports consistent results over time. Robust design for daily workshop and site demands A compact aluminium frame in a white finish houses the tape to protect the measuring band from impact and dirt while remaining lightweight to carry. The 13 mm tape width increases lateral stability during pulls, minimises sag on long runs and improves readability at greater distances. The construction supports frequent handling and transport without compromising functionality, extending service life and reducing replacement intervals. Clear handling and proven accuracy for professional use Marked as accuracy class II (EG II), this frame tape measure balances durability and measurement reliability for routine professional measurements. The tape start marked as A ensures a defined measuring origin for straightforward measurement transfer and layout work. The solid mechanics and easy-to-read scale speed up workflows and reduce the risk of rework caused by unclear readings. Practical advantages that support everyday workflows The design focuses on usability: a stable frame for two-handed operation, a tape width that remains rigid during extended pulls and a visible graduation system that suits both construction and workshop contexts. As a BMI product, the tool is intended for tradespeople and technicians who require a dependable, readily portable measuring solution with simple, verifiable performance. Choose the BMI ERGOLINE frame tape measure for dependable long-distance measuring and contact Metav Werkzeuge for expert guidance and supply from Emmerich – phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 4000855434NW Type: ERGOLINE Brand: BMI Product: Frame tape measure Length: 50 m (50,000 mm) Tape width: 13 mm Numeric data Graduations: mm/cm Accuracy class: EG II Tape start: A Packaging unit: 1 UID: 4000855434NW Special features Aluminium frame, white finish Steel measuring tape Designed for long-range measurement Compact, sturdy frame for site use FAQ What is the total measuring length of the tape? The tape has a total length of 50 m; the ERGOLINE frame tape measure is supplied with a 50,000 mm band suitable for long runs. How wide is the measuring tape and why does that matter? The tape is 13 mm wide, which increases rigidity on extended pulls and improves stability and readability during measurement. Which graduations are printed on the tape? The band is graduated in mm/cm, giving standard fine divisions for precise layout and transfer measurements. Is this tape suitable for heavy site use? Yes — the steel tape within an aluminium frame is engineered for frequent handling and site environments, offering resistance to wear and accidental knocks. What do the tape start 'A' and EG II mean? The tape start indicated as A specifies the measuring origin on the band; EG II denotes the accuracy classification applicable to this frame tape measure. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50m Ergoline Frame Tape Measure 13mm Band Width mm/cm Aluminium White Steel Case - BMI
Take advantage of the combination of reliable precision, robust construction and clear mm/cm graduations for dependable length measurement on site. Benefit from the long 50 m range and the stable 13 mm tape for fast, repeatable readings. Order the product directly via Metav Werkzeuge or ask our consultants if needed. ERGOLINE Frame Tape Measure — 50 m, 13 mm width (BMI) The ERGOLINE frame tape measure is a heavy-duty 50 m measuring tool with mm/cm graduations, designed for precise linear measurement on construction sites and in workshops. Heavy-duty 50 m measuring range Precise mm/cm graduations 13 mm wide tape for stability White aluminium frame, durable construction Reliable long-range measurement for site work The 50 m measuring capacity delivers a practical balance between reach and handling, making the tape suitable for layout, levelling and distance checks. The mm/cm graduations allow both fine millimetre readings and quick centimetre estimates, reducing the need for conversions on site. A clearly readable scale speeds up routine tasks and minimises measuring errors, which contributes directly to process efficiency and fewer reworks. Robust construction that keeps going With a white aluminium frame and a steel-format tape, the design focuses on durability and protection against knocks and weathering typical on building sites. The 13 mm tape width increases rigidity during unwound measurements, reducing sag and improving straight-line readings over long distances. This construction supports reliable daily use and lowers the total cost of ownership through longer service life. Practical features for faster workflows The tape's measured divisions in mm/cm provide versatile readability: millimetre precision for detailed work and centimetre marks for rapid alignment tasks. The indicated measuring start labelled as B defines the tape origin used in this model, ensuring consistent reference points when transferring measurements. A single-piece packaging unit simplifies stock handling for workshops and trade suppliers. Who benefits and where it excels This frame tape is aimed at tradespeople, survey teams and workshop managers who need a dependable long-range measuring instrument. Its combination of stability, clear graduations and sturdy frame makes it especially suitable for outdoor layout, site set-out and industrial measurements where repeatability and readability matter. The product supports a workflow that values predictable, measurable results. Contact Metav Werkzeuge today for tailored advice on the ERGOLINE frame tape measure and fast delivery from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 4000855436NW Type: ERGOLINE Product: Frame tape measure Label: Rahmenbandmaß ERGOLINE L.50m Band-B.13mm B mm/cm EG II Alu.weiß Stahlmaßband BMI Numbers / Core technical data Length: 50 m (50,000 mm) Graduation: mm / cm Tape width: 13 mm Packaging unit: 1 Designs / Special features White aluminium frame Steel-format tape Measuring start: B SKU: 4000855436NW FAQ What is the measuring range of this frame tape? The frame tape offers a measuring range of 50 m, suitable for long runs and site layout tasks. How fine are the graduations on the tape? The tape is graduated in mm/cm, enabling millimetre-accurate readings as well as quick centimetre checks. What does the tape width mean for measurement stability? A 13 mm tape width increases straightness and reduces sag over distance, improving readability during long measurements. Is the frame suitable for outdoor use? The white aluminium frame provides robust protection for site conditions; the steel-format tape enhances mechanical resilience in regular outdoor applications. What does the measuring start marked 'B' indicate? The marking B denotes the defined tape origin for this model, ensuring consistent reference when transferring or comparing measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50m Ergoline Frame Tape Measure 13mm Fibreglass Blade Aluminium Yellow B-Start - Bayerische Maß-Industrie Arno Keller GmbH
Take advantage of a robust 50 m measuring range combined with a glass-fibre blade and a protective aluminium frame for dependable outdoor distance measurement; order the unit directly via Metav Werkzeuge or contact a consultant for advice. ERGOLINE frame tape measure L 50 m (13 mm) by Bayerische Maß-Industrie — glass-fibre tape, aluminium frame The ERGOLINE frame tape measure L 50 m is an open-reel measuring instrument designed for outdoor distance measurement and site surveying, combining a glass-fibre blade with a compact aluminium frame for long-range stability and weather resilience. 50 m measuring range on glass-fibre tape 13 mm wide blade for stable measurement Lightweight aluminium frame, yellow finish Centimetre graduations for quick readings Durable long-range accuracy for outdoor work The 50 m measuring capability paired with a glass-fibre blade provides reliable distance measurement on construction sites and landscaping projects. Glass-fibre tape resists stretching and is non-corrosive, so readings remain consistent even after repeated use in wet or dirty conditions. The 13 mm blade width improves rigidity along long spans, reducing sag and helping to preserve true length over extended pulls. These technical properties translate into fewer re-measures and faster progress on tasks that depend on dependable linear data. Practical handling and protected tape start for everyday use An open-frame format keeps weight low while the yellow aluminium frame offers visual contrast on site and basic impact protection for the reel. The reinforced measuring start indicated as 'B' ensures a secure tape anchorage at the reel, supporting repeatable zero points and reducing tear risk at the blade tip. Ergonomic winding and a balanced design simplify single-operator workflows when measuring along kerbs, across trenches or during topographical surveys. The combination of stable blade and compact frame makes the measuring reel suitable for mobile work without sacrificing operational control. Recommended applications and simple upkeep Designed primarily for site surveying and civil applications, the measuring reel is also suitable for utilities, landscaping and infrastructure inspection where long-range manual measurement is required. The centimetre graduations allow quick, precise readings without auxiliary tools. Maintenance is straightforward: wipe the blade clean of grit and moisture after use and store the reel in a dry place to retain the blade’s performance. For specialised environments or compatibility questions, the technical team at Metav Werkzeuge can provide supplementary specifications and advice. Contact Metav Werkzeuge for technical consultation and local supply of the ERGOLINE 50 m frame tape; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss delivery from Emmerich and application-specific guidance Technical Data Article number: 4000855866NW Product label: ERGOLINE frame tape measure L 50 m (13 mm) Manufacturer: Bayerische Maß‑Industrie Arno Keller GmbH Packaging unit: 1 Facts Length: 50 m Tape width: 13 mm Graduation: centimetre Measuring start: B UID: 4000855866NW Special features Glass-fibre tape Aluminium frame, yellow finish Open-reel / frame tape measure Reinforced tape start FAQ Is the tape suitable for outdoor use on construction sites? The ERGOLINE frame tape with a glass-fibre blade is designed for outdoor use and maintains stable measurements in damp or dirty conditions due to its non-corrosive properties. How precise are the graduations on the measuring reel? The reel is graduated in centimetres, enabling quick, practical readings suitable for site surveying and general construction tasks where centimetre-level resolution is required. Can the tape withstand frequent winding and extended pulls? The 13 mm blade width improves rigidity for long pulls and the glass-fibre material resists stretching, supporting repeated use without notable loss of accuracy. Is this measuring reel appropriate for single-person operation? The open-frame design and balanced reel make it well suited for single-operator measurement tasks commonly encountered in landscaping and utilities work. What maintenance keeps the tape performing well? After use, clean abrasive dirt from the blade and dry before storage; this preserves the glass-fibre surface and prolongs the life of the reel. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50m Frame Measuring Tape 13mm Band Width Centimetre Scale A Start Point - TECWERK
Ensure consistently accurate long-distance measurement with a 50 m steel tape housed in a robust aluminium frame and a 13 mm blade for stable readings; order the frame tape directly via Metav Werkzeuge or consult our advisers for application advice. TECWERK frame tape measure — 50 m, 13 mm blade The TECWERK frame tape measure is a long-range measuring instrument designed for site layout and workshop distance checks, providing clear centimetre graduations and a reliable measuring start. 50 m measuring range 13 mm blade for improved rigidity Steel tape with cm graduations Aluminium open frame, white finish EG II accuracy class specification Precise long-distance measurement for layout and surveying The combination of a 50 m measuring range and centimetre graduations makes this open-frame tape well suited to both external site work and internal workshop layout tasks. The steel tape provides consistent elongation characteristics under normal tension, which helps maintain repeatable readings over longer spans. The recorded specification "measurement start A" is included as a defined datum on the product data and should be considered when planning successive measurements. This configuration reduces the need for multiple shorter tapes and streamlines workflow when marking out trenches, foundations or long runs. Built for stability and regular use A 13 mm blade width increases lateral stiffness, supporting straighter pulls across moderate distances and reducing the risk of blade whip when extending the tape. The open aluminium frame with a white finish offers a lightweight yet protective housing that keeps the reel and tape accessible for quick use. The declared EG II accuracy class gives an indication of expected measurement tolerance for general construction and surveying tasks where class II performance is acceptable. These attributes together contribute to lower downtime and fewer replacements in daily use, delivering measurable efficiency gains for routine measuring jobs. Practical handling and specification clarity Handling is straightforward thanks to the open-frame design and clearly printed graduations in centimetres, enabling rapid reading and marking. The tape is supplied as a single unit, which simplifies inventory and issue control on the shop floor. Durability is enhanced by the steel blade and protective frame, while the plain specification details provided allow planners to integrate the item into tooling lists and measurement protocols without ambiguity. If additional technical clarifications are required, Metav's advisers can supply further details based on the provided product data. Contact Metav Werkzeuge for personalised advice and reliable delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the TECWERK frame tape measure and its suitability for specific applications Technical data Article number: 2000855430NW Item designation: Frame tape measure Manufacturer: TECWERK Length: 50 m Graduation: cm Blade width: 13 mm Measurement start: A Packaging unit: 1 Measures and data Length: 50 m Blade width: 13 mm Graduation: cm Materials and features Aluminium frame, white finish Steel measuring tape Open-frame design EG II accuracy class FAQ What is the measuring range of this frame tape measure? The TECWERK frame tape measure offers a measuring range of 50 m, suitable for long-distance layout and site work. What graduations are printed on the tape? The tape is graduated in centimetres, providing clear metric readings for layout and marking tasks with the TECWERK frame tape measure. What does "measurement start A" refer to? "Measurement start A" is the specified measurement start datum noted in the product data; it is supplied as the defined tape start for the TECWERK frame tape measure. Which accuracy class applies to this measuring tool? The product is listed with an EG II accuracy class specification, indicating the expected tolerance level for common construction and workshop applications. Is the construction suitable for regular site use? Yes, the combination of a steel tape and aluminium open frame gives robust handling characteristics appropriate for regular use in both site and workshop environments. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
50m Frame Measuring Tape 13mm Width Metric Markings, A Start - TECWERK
Taking advantage of a robust framed design and a 50 m measuring range with cm graduations delivers reliable long-range measurement for site work and surveying; combine the 13 mm tape width and clear scale for fast readings. Order the frame tape measure directly via Metav Werkzeuge or ask the consultants for tailored advice. TECWERK frame tape measure – 50 m, 13 mm TECWERK frame tape measure 50 m (13 mm) offers a framed measuring solution for long-range tasks in construction, land surveying and general workshop measurement 50 m measuring range 13 mm tape width Metric scale in cm Framed design for long-range use Accurate long-range measurement for site workflows The framed design delivers consistent alignment across long distances and reduces sagging that distorts readings, making the tool well suited for site levelling and layout tasks. The 50 m tape with cm division provides a straightforward, metric-based scale that supports precise measurements without the need for conversion. Because the graduated scale is laid out in centimetres, material take-offs and layout sketches are quicker and less error-prone, which supports efficient planning and reduced rework on the job. Clear, quick readings thanks to optimal tape width A 13 mm tape width combines portability with legible marking: the wider tape reduces flutter when extended and gives room for bolder numerals and graduations. This improves read‑off speed and lowers the risk of misreading a mark when working at distance. The result is faster measurement cycles and fewer interruptions to workflow, particularly where repeated measurements are required for alignment or verification on site. Built for practical use and handling The framed construction secures the tape during transport and use, while the compact frame keeps handling straightforward on busy sites. The tool’s white casing (Ku.weiß) offers high visibility against workshop and outdoor backdrops, aiding quick retrieval. The designation of measurement start A indicates the tape’s reference point for zeroing and ensures compatibility with common layout procedures, simplifying integration into existing measurement routines. Designed to support everyday professional needs This frame tape measure is intended as a reliable, no-nonsense measuring instrument that fits into a professional toolkit. It is packaged as a single unit for immediate use and is suitable where straightforward metric measurement over extended distances is required. The combination of long-range capability and clear scale reduces downtime and supports consistent results across trades such as plumbing, landscaping, and structural work. For procurement or technical consultation regarding the TECWERK frame tape measure, contact Metav Werkzeuge for advice and reliable supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 2000855411NW Product type: Frame tape measure Label: Rahmenbandmaß 50m 13mm Acm EG II Ku.weiß TECWERK Facts Measuring range: 50 m Tape width: 13 mm Scale division: cm Packaging unit: 1 Materials / Special features Casing colour: white (Ku.weiß) Measurement start: A Brand: TECWERK FAQ What is the measuring range of this frame tape measure? The TECWERK frame tape measure has a measuring range of 50 m and is graduated in centimetres for metric read‑outs. How wide is the tape and why does it matter? The tape is 13 mm wide; this width improves stability when extended and allows for clearer, easier-to-read markings during long-range measurements. Is the scale metric or imperial? The scale is metric with cm divisions, designed to support standard site and workshop metric workflows. Can this tape be used for surveying and layout work? Yes, the framed construction and 50 m range make the tape suitable for surveying, layout and various construction applications where long, precise measurements are needed. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
50m Frame Tape LBM 1000 Steel 13mm Band Width, Metric Start B - STABILA
Take advantage of a durable steel band and precision class II accuracy for consistent site measurements; the compact frame design with a 13 mm band ensures stability over long runs. Order the STABILA LBM 1000 STEEL directly via Metav Werkzeuge or consult our specialists for specification support. STABILA LBM 1000 STEEL — frame measuring tape with 50 m steel band, 13 mm width The LBM 1000 STEEL is a robust frame measuring tape designed for reliable outdoor and workshop measuring tasks; ideal for construction, surveying and workshop layout work where a long, stable steel band and clear millimetre graduations are required. 50 m steel tape for long runs 13 mm band width for reduced sag Accuracy class II for dependable results Reinforced frame design for rough use Reliable long-range measurement for consistent workflows A long steel measuring band combines reach with stable behaviour: the 50 m length lets one measure extended distances without joining tapes, while the 13 mm band width reduces lateral bending and improves straight laying. The tape is graduated in mm, enabling fine subdivisions that support layout, setting out and verification processes in construction and fabrication. Where speed and repeatability matter, the steel tape offers a predictable stiffness that reduces measurement error caused by sag or lateral flex. The specification of accuracy class II provides an objective benchmark for comparability with other instruments and supports informed procurement decisions in professional environments. Practical frame design that eases handling on site The frame format makes storage and transport straightforward on busy sites and in workshops, and the overall construction prioritises durability and ease of use. The frame measuring tool is intended to be both compact and robust, protecting the band during handling and reducing downtime due to damage. The combination of steel band and a sturdy frame supports repeated deployment across different job sites, with resilient performance under typical mechanical stress. For teams that require dependable measuring equipment that survives everyday wear, this design reduces interruptions and contributes to a steady workflow. Transparent technical characteristics for precise planning The specification includes a clear statement of the measuring start as measuring start B, which affects how internal dimensions and offsets are taken and should be considered when planning set-outs. The tape’s mm division and accuracy class II rating are practical indicators of expected measurement tolerance; class II instruments suit many routine layout and construction tasks where laboratory-grade precision is not essential but documented traceability and repeatability are. Clear graduations on a steel band facilitate fast, unambiguous readings and support QA procedures on site. For procurement and tool-park planning, these measurable data points enable straightforward comparison and lifecycle estimation. Contact Metav Werkzeuge for a tailored supply recommendation or request further technical clarification on the STABILA LBM 1000 STEEL to ensure exact fit for the intended application. Technical data SKU: 8000911851NW Type: LBM 1000 STEEL Label: Rahmenbandmaß LBM 1000 STEEL L.50m Band-B.13mm mm EG II Stahlband Manufacturer: STABILA Facts Length: 50 m Scale division: mm Band width: 13 mm Packaging unit: 1 UID: 8000911851NW Special features Product type: frame measuring tape Steel band Accuracy class: EG II Measuring start: B FAQ What length does the tape measure provide and for which tasks is it suitable? The tape delivers a 50 m reach and is suitable for long-distance site layout, surveying and workshop layout where a durable steel band and millimetre graduations are required. How accurate is the instrument and what does class II mean? Accuracy class II indicates a measured tolerance suitable for routine construction and layout tasks; the STABILA LBM 1000 STEEL meets these practical tolerances for dependable on-site measurements. What is the significance of the measuring start B? The measuring start B denotes the reference point from which external and internal measurements are taken and should be accounted for when recording offsets or fitting dimensions. Is the band resistant to bending and suitable for straight-line measurements over long distances? The 13 mm band width and steel construction reduce sag and lateral flex, providing a straighter run and more repeatable measurements across long distances. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50m Frame Tape Measure 13mm Band Width mm/cm Aluminium Yellow Steel Case - BMI
Take advantage of the combination of 50 m reach, a 13 mm steel blade and clear mm/cm graduations for reliable long-range measurement on site or in the workshop. Order the ERGOLINE frame tape measure directly via Metav Werkzeuge or ask our consultants if additional technical data is required. ERGOLINE frame tape measure by BMI — 50 m, 13 mm blade The ERGOLINE frame tape measure is a robust 50 m open-reel measuring tape intended for site and workshop use, offering mm/cm graduations for precise linear measurement and an aluminium yellow frame for durable handling 50 m measuring range 13 mm steel blade mm/cm clear graduations Aluminium yellow frame Built for reliable long-distance measurement The ERGOLINE frame tape measure delivers a long measuring range of 50 m, combined with a narrow 13 mm blade that remains manageable during extended runs. The steel blade provides a balance of stiffness and flexibility, keeping the line taut and reducing sag over long distances; this translates directly into consistent accuracy on jobs such as site surveys, utility laying and façade work. The mm/cm scale ensures fine resolution for technical tasks while remaining easy to read at a glance. Overall, the construction supports efficient measuring processes and fewer re-measurements, helping to save time on each assignment. Designed for practical site and workshop use A lightweight aluminium frame finished in yellow gives the reel enhanced visibility and corrosion resistance, while the open-reel design facilitates quick payout and a controlled rewind. The frame design improves handling when measuring across uneven ground or climbing ladders, and the compact reel supports rapid transport between tasks. Durable materials and a straightforward mechanism mean less downtime for maintenance and faster handover between operators. The measure's format is tailored to the demands of professionals who require both mobility and dependable performance. Clear handling, low maintenance and regulatory orientation Marked mm/cm graduations and a defined measure start (Marking: B) simplify measurement protocols and documentation, reducing interpretation errors when transferring values to plans or digital records. The simple mechanical construction limits service needs; routine checks of the rewind and visual inspection of the blade are usually sufficient to maintain functionality. The tool's robust construction and class marking (EG II) indicate suitability for many everyday industrial and construction tasks, offering a pragmatic blend of precision and resilience without complex calibration routines. For procurement and expert advice on the ERGOLINE 50 m frame tape measure, contact Metav Werkzeuge in Emmerich — Metav’s specialists will advise on compatibility with existing equipment and ensure reliable supply to the workshop Technical data SKU: 4000855856NW Type: ERGOLINE Product: Frame tape measure Manufacturer: BMI Packaging unit: 1 Facts Length: 50 m Blade width: 13 mm Graduation: mm/cm Special features Aluminium yellow frame Steel measuring tape Open-reel/frame design Measure start: B Class: EG II FAQ What is the measuring range of this tape measure? The ERGOLINE frame tape measure offers a measuring range of 50 m, suitable for extended runs on site and larger workshop layouts. Is the blade suitable for precise technical work? Yes, the steel blade with mm/cm graduations provides clear, fine resolution that supports precise linear measurement for technical tasks. What does the measure start 'B' mean for use? The measure start marked as B denotes the tape's reference point for external measurement workflows and should be used consistently when recording values. How robust is the frame in outdoor conditions? The aluminium yellow frame enhances corrosion resistance and visibility, designed to withstand regular outdoor use and transport between job locations. Can this tape measure be used for survey and construction site tasks? Yes, the 50 m reach and clear graduations make this frame tape measure well suited to many survey and construction applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50m Frame Tape Measure 13mm White Stainless Steel A-Start - TECWERK
Take advantage of the combination of a 50 m measuring range, a stable 13 mm tape width and clear cm graduations to speed up site measurements and reduce rework. Order this measuring solution directly via Metav Werkzeuge or ask the Metav consultants for application advice. Frame tape measure 50 m, 13 mm – TECWERK long-range measuring tape The Frame tape measure 50 m 13 mm is designed for long-distance measurement tasks in workshops, construction and surveying where corrosion resistance and clear graduations matter 50 m measurement range 13 mm tape width for stability cm graduation for clear readings Corrosion-resistant frame Measure longer distances with confidence and fewer interruptions A 50 m measuring range enables longer, uninterrupted runs on site and in larger workshop layouts without repeated repositioning of the tape. The specification of a long measuring range reduces time spent on setup and supports efficient workflow planning. As a frame tape measure, this tool stores the tape in a protective housing that helps maintain the tape’s condition between uses, supporting consistent performance over repeated measurements. Clear centimetre graduations for reliable documentation The tape features cm graduations, providing direct decimal-based readings that simplify documentation and reduce conversion errors in drawings and bills of materials. The listed 13 mm tape width contributes to legibility: markings remain visible at a distance and are less prone to deformation during tensioning. These characteristics make the tape suitable for tasks where clear numeric readout and repeatable results are required for handover or quality records. Corrosion resistance and practical suitability for varied environments Marked as corrosion-resistant, the tape is intended to perform where exposure to moisture or dirty conditions is possible. Corrosion resistance extends service life and reduces maintenance, which is particularly relevant for outdoor applications and busy workshop conditions. The combination of a protective frame and rust-resistant construction supports dependable use across jobsite and industrial contexts. For reliable long-range measurement and expert ordering advice, contact Metav Werkzeuge for supply and consultation from Emmerich – info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 2000855414NW Product: Frame tape measure Brand: TECWERK Packaging unit: 1 Facts Measurement range: 50 m Tape width: 13 mm Graduation: cm Measure start: A Special features Corrosion-resistant Frame design for tape protection FAQ Is the tape suitable for outdoor use? The TECWERK frame tape measure is described as corrosion-resistant, making the tool suitable for many outdoor applications where moisture or contamination is present. What graduations are shown on the tape? The tape is graduated in centimetres (cm), which simplifies direct measurement and documentation in metric workflows. How wide is the measuring tape and why is that important? The tape width is 13 mm; a wider tape helps maintain readable markings and contributes to stable behaviour during extended measurements. What is the article number for ordering or reference? The article number is 2000855414NW, which identifies the TECWERK frame tape measure for procurement and stock management. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
50m Frame Tape Measure Ergoline 13mm Band Width mm/cm Start A IP20 - BMI
Take advantage of the combination of long-range measuring capability, clear mm/cm graduation and a 13 mm wide tape for stable readings — ideal for site work and surveying. Order directly via Metav Werkzeuge or consult our advisers for specification matching and delivery. ERGOLINE Frame Tape Measure — 50 m, 13 mm band (BMI) The ERGOLINE frame tape measure is a robust, professional 50 m measuring tape with a 13 mm wide, high-visibility yellow tape graduated in mm/cm, designed for reliable long-distance measurement on construction sites and in workshops 50 m measuring range 13 mm wide high-visibility tape Graduated in mm/cm for precise readings Aluminium frame with yellow tape Reliable long-distance measurement for professional tasks The long measuring range of 50 m supports tasks that require extended coverage without frequent repositioning, which speeds up layout and surveying work. The clear mm/cm graduation enables precise intermediate readings: centimetre marks for quick approximate values and millimetre divisions for fine measurements. This combination reduces rework and improves efficiency on jobs where accuracy over distance matters. The tape’s specification and engraved scale provide a straightforward, verifiable basis for procurement decisions and site documentation. Built for durability and stable handling on site A 13 mm tape width contributes to reduced sag and improved reading stability when measuring across long spans; this makes the product suited to both horizontal and inclined runs. The construction indicated by the label — including an aluminium frame and high-visibility yellow finish — enhances resistance to day-to-day wear and improves visibility in low-light conditions. Robust materials and a compact frame design facilitate handling and storage in busy environments while maintaining service life under frequent use. Clear scale start and professional marking for consistent results The tape is supplied with a measurement start marked as A, which denotes the defined zero point at the tape head for consistent repeatability between users. Marking EG II on the product identifies its intended use in regulated measurement applications. For operators less familiar with industry notation, a measurement start ensures that all readings refer to the same physical reference point on the tape, avoiding offset errors and simplifying transfer of measurements into plans or digital workflows. Who benefits and why it fits into a lean workshop supply chain This frame tape measure is suitable for surveyors, site engineers, installers and workshop teams requiring a reliable 50 m reliable measuring tool that balances reach and readability. Metav’s positioning as a precision partner supports efficient procurement: a broad product range and consolidated logistics from Emmerich reduce supplier complexity and help secure steady availability. The tool’s combination of reach, clear graduation and durable construction supports faster job cycles and dependable results in repetitive measurement tasks. Contact Metav Werkzeuge for tailored advice on the ERGOLINE frame tape measure and to arrange prompt delivery from Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: 4000855854NW Type: ERGOLINE Product: Frame tape measure Brand: BMI Article label: Rahmenbandmaß ERGOLINE L.50m Band-B.13mm A mm/cm EG II Alu.gelb Stahlmaßband Numbers / core technical data Length: 50 m Tape width: 13 mm Graduation: mm/cm Packaging unit: 1 UID: 4000855854NW Special features / materials Measurement start: A Marking: EG II Frame: aluminium (label indication) Tape colour: high-visibility yellow FAQ How long is the measuring range of the tape? The tape offers a 50 m measuring range, suitable for long runs in surveying and site layout tasks. What graduation does the tape use and how does it help? The tape is graduated in mm/cm, allowing both quick centimetre readings and precise millimetre measurements for detailed work. What does the measurement start "A" mean in practice? Measurement start A indicates the defined zero point at the tape head so that all readings are taken from the same reference and are repeatable. Is the tape suitable for outdoor construction use? The combination of a visible yellow tape and an aluminium frame (as indicated on the label) supports durability and visibility on site, making it appropriate for outdoor applications. How wide is the tape and why does that matter? With a 13 mm tape width, the measure offers improved stability over distance, reducing sag and easing accurate reading across longer spans. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50m Frame Tape Measure ERGOLINE 13mm Fibreglass Blade, Centimetre Graduation - Bayerische Maß-Industrie Arno Keller GmbH
Take advantage of a durable combination of 50 m range, 13 mm fibreglass tape and a highly visible yellow aluminium frame for consistent measuring on site; order the product directly via Metav Werkzeuge or ask the consultants for application advice. ERGOLINE frame tape measure — 50 m, 13 mm fibreglass tape, yellow aluminium frame ERGOLINE is a long-range frame tape measure designed for robust on-site measurement tasks in construction, surveying and workshop environments. 50 m measuring length 13 mm fibreglass tape for enhanced stability Yellow aluminium frame for high visibility Precision over long distances for fewer re-measures The 50 m fibreglass measuring tape delivers a dependable measuring range that reduces the need for repeated setups. The 13 mm tape width increases straightness and reduces sag compared with narrower tapes, which supports more accurate readings over long runs. Graduated in cm, the scale permits straightforward metric readings on both short and extended measurements. The specification "measuring start A" denotes that the scale begins at the tape end, enabling direct external measurements from the tape tip without manual offset calculation, which speeds up workflows and lowers the risk of human error. Durable construction for demanding site conditions A yellow aluminium frame provides visual contrast on busy sites and protects the tape from impact and abrasion during transport. The fibreglass construction resists stretching and offers corrosion-free performance where metal tapes may deteriorate; this combination results in a low-maintenance measuring tool that stays true over repeated use. The design type listed as a capsule tape start offers a protected tape entry point, helping to reduce wear at the tape origin and extending service life. The result is a practical measuring solution that supports continuous operation under everyday workshop and site stresses. Practical benefits for trades and surveying teams For tradespeople and surveyors who require efficient, repeatable measurement, the frame tape’s length and stable tape geometry translate into fewer interruptions and faster progress on tasks such as site layout, landscaping or building work. The clear cm division and robust tape material make distance transfer and marking quicker; less time is spent re-checking measurements, which improves overall job throughput. Supplied as a single unit, the tool integrates easily with standard measuring routines and pairs well with common handheld marking and levelling equipment, making it an effective addition to a professional tool kit. Contact Metav Werkzeuge today to confirm suitability for the intended application or to request procurement assistance for the ERGOLINE frame tape measure; Metav Werkzeuge provides expert advice and fast delivery from Emmerich to workshops and sites. Technical data Article number: 4000855864NW UID: 4000855864NW Product type: Bandanfang Kapselbandmaß Label: Rahmenbandmaß ERGOLINE L.50m Band-B.13mm Acm EG II Alu.gelb Glasfaser BMI Facts Length: 50 m Tape width: 13 mm Scale division: cm Measuring start: A Packaging unit: 1 Special features Fibreglass tape Yellow aluminium frame Capsule tape start Measuring class: EG II Manufacturer: Bayerische Maß-Industrie Arno Keller GmbH FAQ Is the tape suitable for outdoor site work? The ERGOLINE frame tape measure is equipped with a fibreglass tape and a yellow aluminium frame, making it well suited to outdoor site environments and visible in varied lighting conditions. How is the scale graduated and read? The tape is graduated in cm, allowing straightforward metric readings for both short- and long-distance measurements with reduced interpolation effort. What does measuring start A mean in practice? Measuring start A indicates that the scale begins at the tape end, so external measurements can be taken directly from the tape tip without adding an offset. Will the tape resist stretching and corrosion? The fibreglass material used for the tape minimises stretching and is inherently corrosion-resistant, which helps the measuring accuracy remain stable over repeated use. Who benefits most from this frame tape? Construction workers, surveyors and workshop teams benefit from the long 50 m range and the stable 13 mm tape width, which together reduce re-measuring and increase daily productivity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50m Rahmenbandmaß Glasfaserband 13mm Maßanfang B, Teilung cm - STABILA
LBM 1000 FIBREGLASS Rahmenbandmaß von STABILA Das LBM 1000 FIBREGLASS ist ein robustes Rahmenbandmaß zur schnellen und präzisen Längenmessung auf der Baustelle und in der Werkstatt Rahmenbandmaß von STABILA Glasfaserband, besonders reißfest Bandbreite 13 mm für stabile Führung Teilung in cm für einfache Ablesung Maßanfang B für exakte Messstarts Robuste Konstruktion für den harten Einsatz Das Rahmenbandmaß überzeugt durch sein Glasfaserband, das hohe Reißfestigkeit mit geringem Gewicht verbindet. Die Bandbreite von 13 mm sorgt für eine stabile Führung auch bei größeren Auszügen, wodurch das Band weniger verwindet und länger präzise bleibt. Die kompakte Rahmenkonstruktion schützt das Band vor Schlägen und Schmutz und reduziert Ausfallzeiten bei rauen Einsatzbedingungen. Präzision und einfache Handhabung beschleunigen Messabläufe Mit Teilung in cm und klarer Skalierung ermöglicht dieses Bandmaß schnelle, nachvollziehbare Messungen ohne aufwändige Umrechnung. Der Maßanfang B sorgt für reproduzierbare Startpunkte bei Übertragungsaufgaben und erleichtert Vermaßungen an Kanten. Dadurch lassen sich Messfehler minimieren und Arbeitsabläufe effizienter gestalten, besonders bei wiederholten Messungen im Bau und bei Montagearbeiten. Vielseitige Einsatzfelder und passende Zielgruppen Das Gerät richtet sich an Handwerk, Bau und Industrie, die zuverlässige, portable Messmittel benötigen. Elektriker, Zimmerer und Vermesser profitieren von der Robustheit des Glasfaserbandes und der handlichen Bauform. Durch die einfache Bedienung eignet sich das Bandmaß auch für Auszubildende und Fachkräfte, die wiederkehrende Längenaufgaben schnell und akkurat abwickeln müssen. Langlebigkeit und Wirtschaftlichkeit im Praxisalltag Weniger Bandbrüche und geringerer Verschleiß reduzieren Wartungsaufwand und Ersatzinvestitionen. Das widerstandsfähige Material kombiniert mit einfacher Pflege macht das Bandmaß zu einer wirtschaftlichen Lösung für Betriebe, die dauerhaft auf verlässliche Messmittel setzen. Die klare Skalierung unterstützt zudem eine schnellere Arbeitsorganisation und damit kürzere Durchlaufzeiten bei Projekten. Empfehlung: Das robuste Rahmenbandmaß von STABILA gezielt über Metav Werkzeuge anfragen; bei technischen Fragen steht der Metav Service per E-Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 zur Verfügung Produktmerkmale Artikelnummer: 8000911849NW Marke: STABILA Typ: LBM 1000 FIBREGLASS Produktart: Rahmenbandmaß Verpackungseinheit: 1 Daten Länge: 50 m Bandbreite: 13 mm Teilung: cm Besonderheiten Material: Glasfaser Maßanfang: B (Messanfang am Bandende) Eichklasse: EG III (geeignet für industrielle Messzwecke) FAQ Wie widerstandsfähig ist das Glasfaserband gegenüber Bruch? Das LBM 1000 FIBREGLASS von STABILA nutzt ein Glasfaserband, das speziell für hohe Belastung und häufiges Ausziehen entwickelt wurde. Im Vergleich zu klassischen Stahlbändern reduziert das Glasfaserband das Risiko von Rissen und Bruchstellen deutlich. Ist das Bandmaß für präzise Innemaße geeignet? Ja, die Teilung in cm und der definierte Maßanfang B ermöglichen exakte Messungen bei Innen- und Außenmaßen. Für kalibrierpflichtige Messungen empfiehlt sich eine Prüfung gemäß den EG-III-Vorgaben. Für welche Anwender ist dieses Rahmenbandmaß besonders geeignet? Das Bandmaß richtet sich an Handwerk und Bau sowie an Montage- und Installationsbetriebe, die ein robustes, leichtes und einfach zu handhabendes Messmittel benötigen. Auch Vermessungsaufgaben im einfachen Baustellenalltag lassen sich damit effizient lösen. Welche Vorteile bietet die Bandbreite von 13 mm? Die Bandbreite 13 mm sorgt für stabile Führung und reduziert das Verwinden des Bandes beim Auszug. Das erhöht die Messgenauigkeit bei langen Strecken und erleichtert die Bedienung durch eine bessere Ablesbarkeit. Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Glass Rule For Microscope Calibration With 0.1mm Scale, Supplied In Case - Metav IndustryLine
Take advantage of a compact, soda‑lime glass reference that combines a fine 0.1 mm engraved scale with a measurement range suited to precision optical checks; its low weight and stable material support repeatable microscope verification. Order directly via Metav Werkzeuge or consult our specialists for application advice. Glass ruler by Metav IndustryLine — 0–50 mm, 0.1 mm scale Glass ruler for quick verification and alignment tasks in optical inspection and microscopy; a compact, high‑contrast reference tool for laboratories and inspection benches. Made from soda‑lime glass 0–50 mm measurement range 0.1 mm engraved scale High precision: (1.5+2L/1000) µm Precise, stable reference for optical checks Constructed from soda‑lime glass, this compact reference offers a stable, non‑reactive surface that keeps markings sharp and readable. The 0–50 mm measurement range places the tool in the micro class for fine mechanical work, where short jaws and minimal flexure deliver the best repeatability. The engraved 0.1 mm graduations provide a clear visual reference for alignment and calibration tasks, while the stated accuracy formula (1.5+2L/1000) µm indicates a tolerance that increases predictably with length—making uncertainty easier to quantify for quality documentation. Practical benefits for laboratory and workshop use The low mass (approximately 0.03 kg) and slim profile support quick handling during routine checks without adding thermal or mechanical load to delicate setups. Optical verification tasks benefit from the glass’s transparency and contrast against microscope reticles, improving positional accuracy when setting or checking scales. For inspection benches focused on small components or watchmaking, the combination of compact design and reliable graduations speeds up processes and reduces rework, offering a tangible efficiency advantage in daily quality routines. Handling guidance and integration into workflows Careful handling preserves the reference surface: clean with a lint‑free cloth and mild glass cleaner, avoid abrasive pads and sudden temperature shifts. The ruler’s dimensions (total length 80 mm, width 30 mm, thickness 5 mm) mean it fits comfortably into inspection jigs or alongside other optical references. For traceable measurement chains, discuss calibration options with Metav Werkzeuge; the tool is designed to serve as a stable visual and dimensional check within existing quality procedures and documentation practices. Contact Metav Werkzeuge for tailored advice on using the Metav IndustryLine glass ruler in microscope verification and to discuss calibration or batch requirements — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M910.321 GTIN: 4061905450037 Material: sodium glass Total length: 80 mm Measurement range: 0–50 mm Facts Width: 30 mm Thickness: 5 mm Weight: 0.03 kg Scale: 0.1 mm Accuracy: (1.5+2L/1000) µm Special features Application: verification of microscopes Category: Rulers (Lineale) Engraved, high‑contrast graduations Lightweight, compact design FAQ What material is the ruler made from and why is it suitable for microscopes? The ruler is made from sodium glass; this material offers stable, non‑reactive surfaces and good contrast, which helps when aligning and checking microscope scales with the Metav IndustryLine glass ruler (SKU M910.321). How precise is the measurement reference? Precision is given as (1.5+2L/1000) µm, a tolerance that grows with length; this predictable behaviour makes the glass ruler suitable as a repeatable reference in optical checks and documentation. Is the ruler suitable for watchmaking and micro components? Yes. With a 0–50 mm range and fine 0.1 mm graduations, the tool fits micro‑class applications where compactness and minimal flexure support accurate, repeatable checks. How should the ruler be cleaned and stored? Use a lint‑free cloth and mild glass cleaner; avoid abrasive agents and sharp impacts. The Metav IndustryLine glass ruler should be stored flat and protected from hard knocks to preserve the engraved scale. Can the ruler be used as part of a calibrated measurement chain? The ruler serves as a stable reference for visual and dimensional checks; for traceability or specific calibration certificates, consult Metav Werkzeuge to arrange suitable calibration services. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Glass Ruler For Microscope Verification, 0.5mm Scale, Packed In Case - Metav IndustryLine
Take advantage of the combination of compact format, reliable accuracy and stable soda‑lime glass construction for precise visual inspection and verification tasks; order the Glass ruler directly via Metav Werkzeuge or ask our consultants if needed. Glass ruler M910.322 — Soda‑lime glass, 0.5 mm scale (Metav IndustryLine) The Glass ruler M910.322 is a compact inspection ruler for microscope verification and fine measurement tasks in the micro measurement range. Compact 80 mm overall length for fine tasks 0.5 mm etched scaling for clear readings Soda‑lime glass for dimensional stability Low mass 0.03 kg for easy handling Precision tailored to small parts and optical checks The instrument is designed for micro-range measurement work, with a measuring span up to 50 mm, which places it in the category for extremely compact, high-resolution inspection tools. The 0.5 mm etched scale gives clear visual graduations, while the quoted accuracy formula of (1.5 + 2L/1000) µm describes the typical deviation behaviour across the length — a concise way to estimate tolerances when comparing or calibrating small features. Together, these attributes support repeatable readings on small components and optical instruments without introducing excessive handling complexity. Stable material and compact geometry for repeatable readings Made from soda‑lime glass, the ruler combines dimensional stability with a smooth reading surface, reducing the risk of wear that can obscure fine graduations. With an overall length of 80 mm, a width of 30 mm and a thickness of 5 mm, the geometry keeps the instrument stiff enough for short-span measurements while remaining easy to position under optics. The low mass (0.03 kg) minimises movement during inspection and helps when aligning the scale under a microscope or camera, simplifying routine verification work in laboratories and inspection benches. Practical integration into inspection workflows Marked with a clear 0.5 mm scale and identified by SKU M910.322 and GTIN 4061905448980, the ruler is suited to visual verification, reference marking and comparative inspection tasks. Its compact format makes it suitable for watchmaking, micro‑assembly or quality control benches where short, precise reference lengths are required. Metav’s supply chain and local presence in Emmerich ensure dependable availability and a consistent quality filter for the European market, supporting workshops and small labs that require dependable, easy‑to‑use measurement aids. Contact Metav Werkzeuge in Emmerich for technical advice and fast supply of the Metav IndustryLine Glass ruler M910.322 Technical data Article number: M910.322 GTIN: 4061905448980 Name: Glass ruler M910.322 Core dimensions Overall length: 80 mm Measuring range: 0–50 mm Width: 30 mm Thickness: 5 mm Mass: 0.03 kg Materials & features Material: soda‑lime glass Scale: 0.5 mm etched Accuracy: (1.5 + 2L/1000) µm Category: micro‑range inspection ruler FAQ What measurement span does the ruler cover? The glass ruler covers a measuring range from 0 to 50 mm and is therefore classified for micro‑range inspection tasks suitable for fine parts. Is the material suitable for optical work and microscope checks? Yes, the soda‑lime glass surface is dimensionally stable and provides a clear, wear‑resistant scale ideal for microscope verification and visual comparison. How is accuracy specified for the instrument? Accuracy is given as (1.5 + 2L/1000) µm, which indicates the expected deviation related to length; this allows assessment of suitability for small‑part inspection. Can the ruler be used for dimensioning tiny components on the bench? The compact format and clear 0.5 mm graduations make the ruler suitable for bench reference, marking and quick comparative checks of small components. Which identifiers help with stock and ordering? Use SKU M910.322 or GTIN 4061905448980 to identify the exact Metav IndustryLine glass ruler when ordering or checking stock. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5m Pocket Tape Measure BM 300 27mm Blade Metric/Metric Easy-Clip PC-ABS/TPE - STABILA
Take advantage of the compact 5 m blade, 27 mm wide graduation and robust PC‑ABS/TPE housing for reliable everyday measuring — order the STABILA BM 300 directly via Metav Werkzeuge or ask our consultants for tailored advice. STABILA BM 300 pocket tape measure — 5 m, 27 mm blade, Easy‑Clip BM 300 is a compact pocket tape measure designed for straightforward length checks in workshops, on construction sites and for general trade applications. Robust PC‑ABS/TPE housing for daily use 27 mm wide blade with mm/mm graduations Easy‑Clip belt attachment for fast handling Class II accuracy for reliable readings Dependable construction for repetitive measurement tasks The housing, moulded from PC‑ABS/TPE, offers a durable shell that resists knocks and everyday wear while keeping the instrument lightweight and manageable. With a 5 m blade and 27 mm width, the measuring ribbon remains stable during stretching, which reduces bending and increases reading reliability. The clear mm/mm graduations and Class II designation support consistent results across routine jobs, making this tape a practical choice where repeatable, documented measurements are required. Practical handling and secure carry for on‑site work A low‑profile Easy‑Clip fastening keeps the tape readily accessible on a belt or pocket, minimising downtime between measurements. The blade width contributes to better rigidity when measuring across spans, improving one‑person operation. The compact design of the cassette simplifies storage on busy workbenches and in tradespeople’s pockets, combining portability with everyday robustness to support efficient workflows. Suited to trades, maintenance and quick checks Engineered for contractors, installers and workshop technicians, this pocket tape provides a balance of precision and convenience. The construction materials ensure resistance to routine exposures encountered on site, while the format supports fast switching between measuring tasks. For workshops that demand a dependable, no‑frills measuring device, the combination of blade length, readable graduations and secure clip makes this model an efficient tool to keep at hand. Contact Metav Werkzeuge today to request the STABILA BM 300 from stock, or consult our specialists for application advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 8000911839NW Type: BM 300 Brand: STABILA Product type: Pocket tape measure Facts Length: 5 m Blade width: 27 mm Graduation: mm/mm Accuracy class: Class II (EG II) Special features Housing: PC‑ABS/TPE Attachment: Easy‑Clip belt clip Packaging unit: 1 UID: 8000911839NW FAQ What are the blade length and width of this tape measure? The STABILA BM 300 features a 5 m blade with a 27 mm width, offering a good balance between reach and stability for most trade and workshop measurements. Which graduations are marked on the blade? The measuring ribbon on the BM 300 is graduated in mm/mm, providing fine millimetre readings suitable for precise length checks. What material is the casing made from? The cassette of this pocket tape measure is made from PC‑ABS/TPE, chosen for impact resistance and a comfortable grip under frequent use. Is this tape suitable for professional on‑site use? Yes — the BM 300 is Class II rated and built for regular workshop and site tasks, combining readable markings and a robust housing for dependable daily measurements. How does the Easy‑Clip attachment benefit workflow? The Easy‑Clip allows quick, secure fastening to belts or pockets so the tape is always to hand, reducing time lost searching for tools and improving on‑site efficiency. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5m Pocket Tape Measure PowerLock® 19mm Steel Blade mm/cm, Mylar® Coated, Auto Lock - STANLEY
Benefit from the combination of a chrome-plated, impact‑resistant housing, a Mylar®-protected blade and automatic rewind with stop for reliable, long-lasting site measurements; order the tape measure directly via Metav Werkzeuge or ask the consultants for detailed advice. PowerLock® 5 m Pocket Tape Measure – 19 mm blade, automatic rewind (STANLEY) The PowerLock® pocket tape measure combines a compact housing with robust measuring performance for general workshop and site use Chrome-plated, impact-resistant plastic housing Mylar®-coated blade for extended wear Automatic rewind with stop and controlled return Triple-riveted end hook, adjustable for inside/outside measures Robust casing that protects daily performance A polished, chrome-plated housing made from impact‑resistant plastic provides mechanical protection and an easy-to-clean surface for workshop environments. The compact case design includes a secure belt clip for safe carriage on site and a smooth external finish that reduces corrosion risk. This construction helps to maintain consistent operation after repeated drops and handling, prolonging the service life of the measuring tool while retaining a professional appearance. Blade construction for stable, readable measurements The tape’s Mylar®-coated blade resists abrasion and paint build-up, which keeps graduations legible over prolonged use. With a 19 mm blade width and clear mm/cm graduations, the blade offers a stable extension for linear measuring tasks and comfortable readability on dim construction sites. The adjustable end hook is riveted for durability (double-riveted for shorter spans, triple-riveted at extended reach) and slides for precise internal and external measurements, ensuring reliable contact and consistent zero points during repetitive work. Safe, efficient rewind and handling on site Operation is simplified by the automatic rewind mechanism with an integrated stop button, enabling controlled retraction and temporary blade hold during marking or transfer of measurements. A controlled return at high extension protects the end hook from sudden impacts and reduces stress on the blade when retracted from long distances. These features speed up repetitive measuring cycles while reducing the likelihood of accidental damage during fast-paced tasks. Accuracy class and typical applications Classified as EG Class II for accuracy, this tape measure is suitable for tradespeople, carpenters and general workshop use where reliable everyday precision is required rather than laboratory calibration standards. The design supports a wide range of measuring tasks on site and in the workshop, from framing and joinery to basic layout and inspection work. Further technical details and application guidance are available from Metav Werkzeuge for those specifying measuring equipment for production or training environments. Contact Metav Werkzeuge today to arrange supply of the STANLEY PowerLock® pocket tape measure with Mylar®-coated blade and controlled rewind — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data SKU: 4000855120NW Brand: STANLEY Product type: Pocket tape measure Facts Length: 5 m Blade width: 19 mm Graduations: mm/cm Accuracy: EG Class II Special features Chrome-plated plastic housing Mylar® blade protection Automatic rewind with stop button Controlled blade return at 10 m Adjustable, riveted end hook (double/triple riveted) Belt clip Packaging unit: 1 FAQ What is the blade length of this tape measure? The STANLEY PowerLock® pocket tape measure provides a 5 m blade (SKU 4000855120NW) suitable for standard site and workshop measuring tasks. Is the blade protected against wear and paint? Yes, the blade is Mylar®-coated, which increases resistance to abrasion and surface contamination and helps keep the graduations legible over extended use. How is the end hook secured and how does it affect accuracy? The end hook is riveted for durability, with double rivets for shorter spans and triple rivets at extended reach; the hook is adjustable for internal and external measurements, supporting consistent zero-point behaviour. Does the rewind mechanism include a way to stop the blade? The device features an automatic rewind with an integrated stop button and a controlled return function to protect the end hook and improve handling speed. For which tasks is this tape measure best suited? This pocket tape measure is intended for tradespeople and general workshop use where EG Class II accuracy and robust everyday performance are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5m Tape Measure 13mm Blade Self‑Locking Start Left - TAJIMA
Benefit from the combination of practical range and dependable handling: the 5 m tape length and 13 mm tape width deliver precise reach and readable markings, while the self-locking function ensures steady measurements; order the TAJIMA PIT MEASURE via Metav Werkzeuge or ask our consultants if needed. TAJIMA PIT MEASURE — 5 m Measuring Tape, 13 mm Tape Width, Self‑locking The TAJIMA PIT MEASURE is a compact tape measure designed for accurate linear measurement in workshops and on-site environments, offering a 5 m reach and a 13 mm wide tape with a left-hand measurement start. 5 m measuring range 13 mm tape width Self‑locking mechanism Long reach with reliable accuracy A 5 m measuring range extends capability beyond short tapes while maintaining manageable handling in confined workshop spaces. The 13 mm tape width supports a flatter, more stable projection that reduces sag when measuring longer distances, which in turn improves reading accuracy. For production or maintenance tasks where repeatable, verifiable measurements matter, this instrument provides a consistent basis for alignment, marking and simple inspection work. The clear numeric graduations on the steel tape combine with the tape’s width to make measurements faster and less error‑prone. Secure measurements and clear start point The integrated self‑locking function secures the tape at the required length, preventing accidental retraction and enabling hands‑free marking or alignment operations. The tape’s measurement start is set to the left, simplifying edge and inside measurements without additional conversion steps. This mechanical convenience reduces interruptions during workflow and helps to maintain focus on the task rather than on handling the tool. The result is an observable efficiency gain in everyday shop tasks and a reduction in small measurement errors. Practical fit for workshop routines Designed as a straightforward measuring instrument rather than a complicated device, this tape measure emphasises usability and dependable operation. The combination of a medium‑range tape and a robust locking mechanism suits tradespeople and workshop technicians who repeatedly measure parts, fixtures or installation points. Backed by the TAJIMA reputation for tool reliability and available through Metav’s distribution, the product supports a supply chain that aims to keep workshops equipped and running without surprises. Choose the TAJIMA PIT MEASURE for dependable 5 m measurements and contact Metav Werkzeuge for expert advice and procurement support Technical data SKU: 4000855618NW Product type: PIT MEASURE Product label: Bandmaß PIT MEASURE L.5m Bandbr.13mm selbstkl.TAJIMA Manufacturer: TAJIMA Packaging unit: 1 UID: 4000855618NW Key figures Length: 5 m Tape width: 13 mm Special features Self‑locking mechanism Measurement start: left FAQ What measuring range does this tape offer? The TAJIMA PIT MEASURE provides a measuring range of 5 m (SKU 4000855618NW), suitable for medium‑distance tasks in workshops and on site. Is the tape width suitable for extended measurements? Yes, the 13 mm tape width offers better stability and readability over longer pulls, improving measurement accuracy. Does the instrument lock in position during measurements? The tape incorporates a self‑locking mechanism that secures the blade at the required length for steady, hands‑free marking. Where is the measurement start located on the tape? The measuring start is positioned on the left, which facilitates edge and internal measurements without conversion. Is this tape intended for professional use? The tape measure is designed for workshop and trade applications where reliable, repeatable linear measurement is needed and is distributed via Metav Werkzeuge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5m Tape Measure 19mm Blade mm/cm Belt Clip - Stanley Black & Decker Deutschland GmbH
Take advantage of reliable Class II accuracy, a stable 19 mm blade and a compact design for fast, repeatable measurements on the workbench; order the tape measure directly via Metav Werkzeuge or consult our specialists for application advice. Stanley 5 m Tape Measure – 19 mm blade, Class II, belt clip Stanley 5 m tape measure for precise routine measuring in workshops and on-site jobs, combining a robust 19 mm blade with an easy-to-use belt clip and an mm/cm scale 5 m measuring length, mm/cm scale 19 mm blade for greater stability Class II accuracy for standard tasks Plastic housing with belt clip for portability Accurate measurements that speed up everyday workflows A compact measuring tool with a 5 m range and an mm/cm scale brings measurable efficiency to repetitive tasks. The slightly wider 19 mm blade reduces bending and gives a steadier readout over longer spans, which cuts rework and saves time in production and maintenance. The device’s Class II specification indicates conformity with common European tolerance classes, making it suitable for standard workshop and service applications where consistent, verifiable results are required. Practical design for mobility and convenience The unit’s plastic case keeps the mechanism lightweight while protecting the tape from knocks; the integrated belt clip ensures the measure is always within reach on-site. This combination supports quicker routines during installation or inspection work and reduces the likelihood of misplacement between jobs. Loose packaging simplifies storage for trade counters and helps fit the tool directly into existing workshop workflows without unnecessary wrapping. Simple specification, clear purchasing choice With few moving parts and a focus on core measuring features, this pocket tape offers a cost-effective solution for shops and service teams that need dependable basic metrology. The straightforward mm/cm graduation and the 19 mm blade width are easy to interpret for operators with varying experience levels, while the compact design supports handheld use and rapid measuring cycles. For users requiring advice on compatibility with particular tasks, technical clarification is available from Metav Werkzeuge. Contact Metav Werkzeuge for tailored ordering and application guidance on this Stanley tape measure; call +49 2822 7131930 or email info@metav-werkzeuge.com and benefit from Metav’s expertise and supply reliability Technical data Article number: 4000787070NW Label: Taschenrollbandmaß L.5m B.19mm mm/cm EG II Ku.Gürtelclip STANLEY Manufacturer: Stanley Black & Decker Deutschland GmbH Packaging: loose Numbers Length: 5 m Blade width: 19 mm Scale: mm/cm Packaging unit: 1 UID: 4000787070NW Special features Class II accuracy (EG II) Plastic case Belt clip FAQ What is the measuring range of this tape measure? The tape offers a measuring range of 5 m, indicated on the Stanley 5 m tape measure with an mm/cm scale. How wide is the blade and why does that matter? The blade is 19 mm wide, which increases rigidity during measurement and supports more stable readings over longer spans. Is this tape appropriate for standard workshop tasks? Yes, the tape’s Class II specification suits common workshop and service tasks where standard accuracy and repeatability are required. Does the product include a belt clip for transport? Yes, the practical design includes a belt clip and a plastic housing for easy portability and everyday handling. How is the product supplied for trade counters? The item is supplied loose in packaging with a packaging unit of 1 and the article number 4000787070NW. Stanley Black & Decker Deutschland GmbH / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5m Tape Measure 19mm Blade mm/cm Self-Locking ABS Case Magnetic Hook EG II - TECWERK
Take advantage of a robust steel tape with matt yellow lacquer, the self‑locking rewind and the dual‑magnet end hook to speed up routine measurements while retaining EC Class II precision; order the TECWERK pocket tape measure directly via Metav Werkzeuge or contact our consultants for tailored advice. TECWERK Pocket Tape Measure – 5 m, 19 mm, self‑locking, ABS case TECWERK Pocket Tape Measure for workshop and site measuring tasks, combining a 5 m steel tape with mm/cm graduation and a compact ABS housing for everyday use 5 m steel tape, matt yellow lacquered Self-locking with push‑button rewind End hook with two integrated magnets ABS housing with belt clip and strap Precision and visibility for repeatable measurements The 5 m length and 19 mm tape width deliver a stable measuring blade that resists bending during frequent use. A matt‑yellow lacquer finish increases contrast for the mm/cm gradation, improving read‑off speed and reducing errors in production or maintenance settings. The tool meets EC Class II accuracy, which provides a verifiable tolerance suitable for many industrial and trade applications; this level of precision supports consistent quality control without the need for specialised instruments. Faster workflows through secure locking and controlled rewind The built‑in self‑locking mechanism holds the blade at the required length, eliminating tape flutter and allowing one‑hand operation when setting out or checking dimensions. Rewind is activated by a push‑button, enabling controlled return of the blade and reducing wear on the tape edge. These features shorten cycle times for repetitive tasks and lower the risk of accidental damage, contributing to operational efficiency and safer handling in busy workshops. Robust, ergonomic design for on‑the‑move use An ABS housing combined with a belt clip and carrying strap keeps the tape measure close at hand while protecting the mechanism from knocks. The end hook, fitted with two integrated magnets, secures the blade to ferrous surfaces for single‑person measurements on metal parts or structures. The compact construction and practical fittings make this instrument suitable for tradespeople and engineers who need a reliable, portable measuring solution that balances durability with everyday convenience. For reliable shop and site measuring, choose the TECWERK 5 m self‑locking pocket tape measure and contact Metav Werkzeuge for expert advice and fast supply from Emmerich: info@metav-werkzeuge.com · +49 2822 7131930 Technical Data Article number: 2000855038NW Brand: TECWERK Product type: Pocket tape measure Facts Length: 5 m (5,000 mm) Tape width: 19 mm Scale: mm / cm Accuracy: EC Class II Packaging unit: 1 Special features Steel tape, matt yellow lacquered Self‑locking system, push‑button rewind End hook with two integrated magnets Housing material: ABS Belt clip and carrying strap FAQ How accurate is this tape measure for workshop tasks? The TECWERK pocket tape measure complies with EC Class II, providing industry‑standard accuracy suitable for many workshop and trade applications. Can the tape be fixed to metal parts during measurement? Yes, the end hook contains two integrated magnets so the blade can be secured to ferrous surfaces for single‑handed measuring. Is the rewind controlled to protect the blade? The instrument features a self‑locking mechanism and a push‑button rewind for controlled blade return, which reduces wear and improves handling safety. What graduations does the tape use? The blade is graduated in mm/cm, printed on a matt‑yellow lacquered steel tape to enhance legibility in workshop lighting. Is the housing suitable for daily site use? The casing is made from ABS and includes a belt clip and carrying strap, offering robustness and portability for routine site and shop use. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
5m Tape Measure 19mm Matt Yellow Steel Blade Dual-Gradation, Automatic Self-Lock EG Class II - TECWERK
Take advantage of the robust matt‑yellow steel tape and the compact 2K chrome‑plated housing for reliable, workshop‑grade measurements; the self‑locking mechanism and 19 mm blade width ensure fast, stable measurements on the job. Order the item directly via Metav Werkzeuge or contact our consultants for further specification support. TECWERK Pocket Tape Measure L 5 m, 19 mm — matt‑yellow steel tape, EG class II The TECWERK pocket tape measure L 5 m B 19 mm is a compact retractable measuring tape designed for general workshop and site use, combining clear double‑sided graduations with a durable 2K housing. Matt‑yellow steel tape for improved contrast 19 mm wide blade for stable handling Self‑locking mechanism with push‑button rewind Chrome‑plated 2K housing with rubber overmould Accuracy and performance that support production flow The instrument offers EG class II accuracy, making it suitable for routine workshop measurement tasks where consistent repeatability matters. The 5 m length on a 19 mm blade balances reach and rigidity: the slightly wider tape reduces wobble during single‑handed use and aids accurate marking. The tape is double‑graduated (mm/cm) and printed on both sides with one side presented horizontally and the reverse vertically, allowing quick reading in different orientations. The self‑locking function secures the blade at the required length, while push‑button rewind returns the tape smoothly to the housing, reducing downtime between measurements. Durable construction for everyday handling Designed for continuous use in busy environments, the housing combines a chrome‑plated plastic shell with a partial rubber overmould to protect against knocks and abrasions. The 2K housing provides a firm grip and houses a reliable retraction mechanism rated for frequent cycles. The tape itself is matt‑yellow lacquered steel, chosen for high contrast printing and resistance to wear; the reinforced end feature includes a double end hook for secure anchoring on the workpiece, particularly helpful when measuring edges or awkward surfaces. These design choices reduce the risk of measurement errors and extend service life, contributing to lower total cost of ownership. Designed for efficiency and everyday usability Marking, measuring and transferring dimensions is quicker thanks to the clear dual graduations and the tape’s readable finish. The 19 mm width helps the blade extend further without bending, permitting more accurate single‑person measurements. A belt clip on the housing keeps the tool accessible on the go, while the compact format suits trade professionals, assembly technicians and maintenance staff who require a portable, dependable measuring aid. For users unfamiliar with technical classes, EG class II indicates the tape meets recognised European tolerance bands for tape measures in this category, offering a good balance of precision and robustness for general industrial use. Contact Metav Werkzeuge to source the TECWERK pocket tape measure L 5 m B 19 mm with EG class II accuracy — expert advice and supply from Emmerich is available by phone or email Technical Data Article number: 2000855017NW Product name: Pocket tape measure L 5 m B 19 mm mm/cm EG II 2K Automatic Product type: Pocket tape measure Manufacturer: TECWERK Packaging unit: 1 Numbers / Core technical data Length: 5 m Blade width: 19 mm Graduation: mm/cm (double‑sided) Accuracy class: EG II Special features / Materials Matt‑yellow lacquered steel tape Double‑sided band graduations (one horizontal, one vertical) Self‑locking system, push‑button rewind Double end hook (applies to 5 m version) Chrome‑plated plastic housing with partial rubber overmould 2K housing design Belt clip FAQ What is the length and blade width of this tape measure? The TECWERK pocket tape measure is supplied with a 5 m blade and a 19 mm width, providing a balance between reach and rigidity for workshop tasks. Does the tape have single‑ or double‑sided graduations? The measuring tape features double‑sided graduations with a horizontal print on one side and a vertical print on the other to aid different reading orientations. What does EG class II mean for everyday use? EG class II indicates the tape meets European tolerance standards for this accuracy class; the TECWERK tape is suited to routine industrial and trade measurements where consistent, reliable results are required. Is the housing durable enough for site work? Yes — the housing is a chrome‑plated 2K plastic shell with a rubber overmould to absorb impacts, plus a belt clip for secure portability during site work. How does the locking and rewind mechanism operate? A self‑locking system holds the blade at the required length; the blade is retracted smoothly with a push‑button rewind, reducing wear and speeding up repetitive measuring tasks. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
5m Tape Measure 19mm Yellow Coated Steel Band, Automatic Rewind EG Class II - TECWERK
Take advantage of a compact, workshop-ready measuring tool that combines a 5 m yellow lacquered steel tape with an automatic rewind and lock, delivering reliable, repeatable linear measurement for everyday tasks; order the TECWERK tape directly via Metav Werkzeuge or request advice from our consultants. TECWERK Pocket Retractable Tape Measure — 5 m, 19 mm The TECWERK Pocket Retractable Tape Measure is designed for robust linear measurement in workshops, maintenance and outdoor jobsite use, offering a slim 19 mm blade and EC Class II accuracy. Yellow lacquered steel tape Automatic rewind with lock Chrome-plated plastic housing EC accuracy class II Durable, compact measurement that fits the workflow The compact design combines a 19 mm wide blade with a 5 m measuring length to keep handling simple without sacrificing visibility. The yellow lacquered steel tape improves contrast for the mm/cm graduations, so marks and readings remain clear during repeated use. Built to be mobile, the tool's small footprint reduces drawer clutter and enables quick transport between workstations while maintaining consistent linear measurement performance. Reliable rewind and locking for efficient operation An automatic rewind mechanism with an integrated lock secures the blade after extension, reducing the risk of blade whip and speeding up repetitive measuring tasks. The rewind delivers fast retraction, while the lock ensures stable readings at the required length. This combination supports faster cycle times on measurement routines and minimises handling errors, improving throughput for routine inspection and layout work. Practical housing and on-the-go convenience The chrome-plated plastic housing with a belt clip offers both resistance against everyday knocks and easy carrying at the belt or pouch. The case construction protects the blade and mechanism from dust and light impact, extending service life. With EC accuracy class II declared, the instrument provides a recognised level of precision suitable for general workshop measurement and maintenance checks, balancing affordability with dependable performance. For precise workshop measuring tools and expert guidance on the TECWERK pocket retractable tape measure, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for procurement and technical advice. Technical data Article number: 2000855041NW Label: Taschenrollbandmaß L.5m B.19mm mm/cm EG II Ku.CR TECWERK Product type: Pocket retractable tape measure SKU: 2000855041NW Facts Length: 5 m Blade width: 19 mm Graduation: mm / cm Accuracy class: EC II Packaging unit: 1 Special features Yellow lacquered steel tape Automatic band rewind with lock Chrome-plated plastic housing with belt clip Housing material: Plastic FAQ What is the usable length and blade width of this tape measure? The TECWERK pocket retractable tape measure has a usable length of 5 m and a blade width of 19 mm, suitable for most workshop layout tasks. Is the tape suitable for precise workshop measurements? Yes, the instrument is specified to EC accuracy class II, providing recognised precision for general workshop and maintenance measurement. How does the rewind and lock operate? The automatic rewind retracts the blade quickly, and the integrated lock secures the blade at the chosen length to prevent retraction during marking or checking. What materials and protection features are included? The blade is a yellow lacquered steel tape for improved readability; the case is chrome-plated plastic and includes a belt clip for secure transport. Who supplies this product and how can technical questions be addressed? Metav Werkzeuge supplies the product and can be contacted for technical queries at info@metav-werkzeuge.com or by telephone at +49 2822 7131930. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
Accurate checks with precision straightedges
Precision straightedges are high-accuracy measuring tools designed to verify flatness and straightness across surfaces. Available in several lengths and finished from durable metals, these instruments provide a simple, repeatable method for alignment and inspection in industrial settings.
How precision straightedges work and where they are used
A precision straightedge is laid against a surface to reveal deviations from true flatness or a straight line, with fine graduations enabling careful assessment of run-out and planar error. Typical applications include mechanical engineering, electronics, optics and microscopy, machine tool build and quality control, where reliable visual or feeler-gauge inspection prevents assembly issues and functional failure.
Key advantages that cut waste and speed up production
- high accuracy and stable construction reduce measurement uncertainty and help maintain production tolerances.
- stainless steel or other precision metals ensure long service life and corrosion resistance.
- fine graduations and etched scales allow precise readings and repeatable checks.
- various lengths suit bench work as well as larger components, shortening setup time.
- simple handling lowers inspection time and contributes to fewer rejects and rework.
Why Metav is the practical choice for precision straightedges
Metav combines decade-long expertise with a broad range of measurement tools, making it a pragmatic partner for workshop and production buyers. With over 48,000 customers and a catalogue exceeding 250,000 products, Metav operates from Emmerich as a quality filter for the european market, offering consistent availability and straightforward order processing. For those seeking a reliable source of precision straightedges and complementary measuring instruments, Metav’s range and technical information help select the correct specification for the intended inspection task.
In brief
Precision straightedges deliver fast, reliable assessments of flatness and straightness across industries, improving quality control and reducing scrap while being simple to use and maintain.
FAQ
What materials are precision straightedges typically made from?
Precision straightedges are commonly manufactured from stainless steel or other precision metals to ensure stability, wear resistance and longevity in industrial use.
In which industries are precision straightedges most valuable?
Precision straightedges are widely used in mechanical engineering, electronics, optics and microscopy, machine tool construction and general quality control where geometric accuracy is critical.
How is a precision straightedge used to check flatness?
Place the precision straightedge on the surface and inspect gaps visually or with feeler gauges; fine graduations and a straight reference edge make deviations from flatness evident for correction or further machining.
Are different lengths available for precision straightedges?
Yes, precision straightedges are offered in various lengths to match bench-top inspections as well as larger component checks, allowing selection of the most efficient tool for each application.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com