Precision rulers for accurate alignment
Precision rulers are specialised measuring tools used to check flatness and straightness in metalworking and inspection processes, providing reliable alignment and verification for assemblies and machined surfaces. They are typically made from stainless steel or precision metals and serve machining, optics, electronics and quality control applications where tight tolerances are required; using a precision ruler improves repeatability and reduces non‑conformances. Common synonyms include straight edge and flatness gauge, and the durable construction alongside fine graduations ensures the tool remains accurate over years of workshop use.
5m Tape Measure 19mm Yellow Steel Blade Automatic Retract, Metric EG Class II - TECWERK
Combining a 5 m, 19 mm yellow lacquered steel blade with an automatic rewind and stop button, this tape measure offers fast, visible measurements and secure blade handling for everyday workshop tasks; order directly via Metav Werkzeuge or contact our consultants for tailored advice. TECWERK Retractable Pocket Tape Measure 5 m × 19 mm — automatic rewind, EC Class II The retractable pocket tape measure 5 m × 19 mm from TECWERK is a compact measuring tool for general workshop and trade use, featuring a yellow lacquered steel blade and a robust ABS housing. Yellow lacquered steel tape Automatic rewind with stop button Ergonomic ABS housing with belt clip EC Class II accuracy Clear, durable blade for fast, reliable readings The yellow lacquered steel tape resists wear and improves contrast for quick reading of the mm/cm graduations, while the 19 mm blade width provides sufficient rigidity for one-person measuring over the full 5 m range. The EC Class II designation indicates a measurement tolerance suitable for most trade and workshop tasks; this means repeatable results for fitting, carpentry and general installation work without the need for specialised calibration. The visible finish and standard graduations reduce reading errors and speed up routine checks. Ergonomic design and simple control reduce downtime An ABS housing shaped for grip, together with a belt clip and carrying strap, keeps the tool accessible and safe on-site. The automatic rewind mechanism returns the blade quickly, while the stop button and integrated lock allow controlled measurement and prevent the tape snapping back unexpectedly — a practical safety and efficiency benefit. The lightweight casing and one-handed operation support continuous use in busy workflows, so measuring tasks are completed faster with less effort and lower fatigue. Practical applications and straightforward maintenance Built for trade and workshop environments, this compact measure is suitable for quick layouts, on-site checks and everyday assembly tasks where robust handling and clear graduations matter. The ABS housing and lacquered blade require minimal upkeep: a wipe to remove debris and occasional inspection of the locking mechanism ensure long service life. Its combination of precision, visible markings and ergonomic features makes it a reliable choice for technicians, carpenters and maintenance personnel who need rapid, repeatable measurements in varied conditions. For dependable everyday precision choose the TECWERK retractable tape measure — contact Metav Werkzeuge for ordering or technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: 2000855008NW SKU: 2000855008NW Brand: TECWERK Product type: Retractable pocket tape measure Packaging unit: 1 Facts Length: 5,000 mm (5 m) Blade width: 19 mm Graduation: mm/cm Accuracy: EC Class II Special features Yellow lacquered steel tape Automatic rewind with stop button and lock Ergonomic design with belt clip and carrying strap Housing material: ABS plastic FAQ Is this tape suitable for professional trade work? The TECWERK retractable pocket tape measure 5 m × 19 mm (SKU 2000855008NW) is designed for trade and workshop applications and meets EC Class II requirements for reliable everyday measurements. What does EC Class II mean for practical use? EC Class II indicates a defined tolerance band appropriate for most construction and installation tasks; the TECWERK tape measure delivers repeatable results suitable for general professional use. Can the tape be used for both millimetres and centimetres? Yes, the blade shows graduations in mm/cm, allowing precise readings in millimetres and easy reference in centimetres for common layout and fitting tasks. How does the automatic rewind and stop button improve safety? The automatic rewind speeds up blade return, while the stop button and lock allow controlled measurement and prevent rapid retraction, reducing the risk of blade damage and operator injury. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
5m Tape Measure BM 100 Yellow Coated Steel Band, Metric Graduation EG Class II - STABILA
Compact, robust and precise: the combination of a 5 m measuring range, a 19 mm yellow lacquered steel blade and an automatic rewind with locking brake ensures rapid, dependable measurements and safe on‑site handling. Order the STABILA BM 100 directly via Metav Werkzeuge or consult our specialists for tailored advice. STABILA BM 100 pocket tape measure — 5 m, 19 mm blade The BM 100 is a compact pocket tape measure for precise metric measuring up to 5 m, designed for tradespeople and workshop applications where clear markings and quick handling save time. 5 m measuring range, 19 mm wide steel blade Automatic rewind with locking brake ABS/TPE shock‑resistant housing Integrated belt clip and lanyard eyelet Precise results with clearly visible metric graduations Reliability begins with measurement accuracy. The EC accuracy class II rating combined with a single-sided metric scale and mm division provides defined tolerances for everyday professional use. The yellow lacquered steel blade improves contrast and reduces glare on site, while the integrated nail eye in the hook and a standard hook ensure the blade can be anchored for one‑person work. These features translate into fewer re‑measures and consistent outcomes across routine cutting, layout and installation tasks. Faster work thanks to ergonomic handling and secure locking A smooth workflow is supported by the automatic rewind mechanism and a locking brake that secures the blade at length for hands‑free measurements. The compact housing, reinforced with ABS/TPE, and the belt clip plus lanyard eyelet allow secure storage and rapid access on the job. With a net weight of only 0.22 kg and compact dimensions, the measure fits comfortably in a pocket yet withstands daily use — a practical way to reduce task time and minimise interruption. Built to withstand workshop and site conditions Durability is engineered into the design: an impact‑absorbing housing and a shock absorber protect internal components when the tape is dropped or used in busy environments. Compliance marks such as CE, REACH and RoHS confirm conformity with relevant European requirements. The combination of protective housing and a lacquered steel blade means the tool endures abrasive conditions while maintaining readable graduations for longer service life. Practical choice for everyday professional needs Intended for carpenters, electricians, installers and general workshop use, the compact measure offers a balance of precision, speed and robustness. The practical feature set reduces the risk of measurement errors and supports efficient work routines. If supplementary technical data or clarification is required to confirm fit for a particular application, Metav Werkzeuge is available to advise and supply detailed information. For reliable metric measuring on site, request the STABILA BM 100 via Metav Werkzeuge — contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for specification guidance and procurement support. Technical data Article number: 8000911832NW Type: BM 100 Product: Pocket tape measure Brand: STABILA Scale: mm/mm Max. measuring range: 5 m Blade width: 19 mm Facts Measuring range: 5 m Blade width: 19 mm Accuracy: EC class II Net weight: 0.22 kg Dimensions (H × W × L): 7 cm × 4 cm × 7.5 cm Special features Yellow lacquered steel blade Automatic rewind and brake button Single-sided metric scale Integrated nail eye in hook Standard hook ABS/TPE housing with shock absorber Belt clip and lanyard eyelet CE marked; REACH and RoHS compliant Analog display; approved construction design FAQ What is the measuring accuracy of this tape measure? The STABILA BM 100 pocket tape measure is rated EC accuracy class II, which defines tolerances suitable for standard professional workshop and building tasks. Can the blade be locked at a specific length? Yes, the measure features a locking brake that secures the blade in position for hands‑free measuring and safer marking. What materials are the blade and housing made from? The blade is a yellow lacquered steel tape and the housing is made from ABS/TPE with a shock absorber for enhanced durability. Is the scale metric and one‑ or two‑sided? The measure has a single-sided metric scale with mm division, designed for clear metric readings on one face of the blade. Which SKU should be ordered for the STABILA pocket tape measure? Order using SKU 8000911832NW for the STABILA BM 100 pocket tape measure to ensure the correct 5 m × 19 mm model is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5m Tape Measure Two-Component Case ABS Automatic Rewind Stopper EG Class II - BMI
Combine the compact twoComp pocket tape measure with its impact-resistant ABS housing and automatic rewind to achieve fast, repeatable measurements with EG Class II accuracy; order the item directly via Metav Werkzeuge or contact our consultants for application advice. twoComp pocket tape measure L 5 m B 19 mm (mm/mm) — compact pocket tape measure with automatic rewind by BMI A twoComp pocket tape measure designed for workshop and trade use, offering a 5 m tape, 19 mm blade width and EG Class II accuracy for routine measuring tasks. Impact-resistant ABS casing with soft-touch insert Automatic rewind with integrated stopper 5 m tape, 19 mm wide, dual mm/mm scale Belt clip for secure workplace attachment Reliable measurements for everyday workshop tasks The compact measuring tool is built around a robust band mechanism and an ABS housing with a grippable soft-touch component, ensuring consistent performance on the shop floor. The 5 m blade with a 19 mm width provides a stable, straight span that reduces sag when measuring medium distances, while the EG Class II rating documents the permitted tolerance for commercial use. These technical qualities translate into fewer repeat measurements and a predictable workflow, which supports productivity in assembly, maintenance and installation tasks. Faster handling and safer use reduce downtime An automatic rewind combined with an integrated stopper speeds up single-handed operation and prevents accidental overrun of the blade, so measuring cycles become quicker and cleaner. The presence of a belt clip keeps the tape available at the operator’s side, reducing search time and minimising interruptions. Together, these features support efficient processes and a tidier workspace — practical advantages for workshops, installation teams and service technicians who value repeatability and ease of handling. Practical specification and material benefits explained The casing material, ABS, offers impact resistance and dimensional stability, which helps protect internal components and extend service life under normal workshop conditions. The blade’s dual mm/mm graduation suits metric workflows and allows direct reading without conversion, simplifying documentation and reducing the risk of transcription errors. Where a certified tolerance is required, the EG Class II designation provides a recognised basis for procurement and quality control decisions. Support, guidance and supply reliability If additional technical details are required or if this measuring tool needs to be matched to a specific application, Metav Werkzeuge is available to advise on suitability and integration. Metav’s supply network complements the product with consistent availability and industrial purchasing support; contact via info@metav-werkzeuge.com or on +49 2822 7131930 for further specification data or ordering guidance. The combination of practical design and supplier reliability makes this compact tape measure a dependable choice for routine metrology tasks. Request this BMI twoComp pocket tape measure through Metav Werkzeuge for a dependable workshop solution and contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice Technical data Article number: 4000855885NW SKU: 4000855885NW Product: Pocket tape measure, twoCOMP Label: Taschenrollbandmaß twoComp L.5m B.19mm mm/mm EG II ABS Automatic SB BMI Brand: BMI Packaging unit: 1 Facts Length: 5 m Blade width: 19 mm Scale: mm/mm Accuracy: EG Class II Special features Casing material: ABS with soft-touch component Mechanism: robust band mechanism Rewind: automatic with integrated stopper Attachment: belt clip included FAQ What material is the casing made from? The casing of the twoComp pocket tape measure is made from impact-resistant ABS with a soft-touch component for improved grip and protection. What blade length and width does this measuring tape offer? The measuring tape provides a 5 m blade with a 19 mm width, offering a balance between reach and stiffness for routine workshop measuring. Which accuracy class applies to this tape? This measuring tool complies with EG Class II accuracy, making it suitable for standard commercial and workshop applications requiring documented tolerances. Does the tape feature automatic rewind and a stopper? Yes, the tool includes an automatic rewind mechanism with an integrated stopper to control the blade and speed up single-handed operation. Is there a way to keep the tape close at hand during work? A belt clip is supplied with the tape, allowing secure attachment to clothing or tool belts for immediate accessibility. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5m Tape Measure Two-Component Case Magnetic Hook EG Class II - BMI
Take advantage of a robust tape mechanism and a shock‑resistant ABS housing with a grippy soft component for safe handling; the integrated magnetic hook and automatic recoil with stopper speed up routine measurement tasks. Order the tool directly via Metav Werkzeuge or consult our specialists for specification checks and availability. twoComp L.5m B.19mm mm/mm EG II ABS m.Magnet SB BMI — Pocket tape measure with 5 m blade and magnetic hook The twoComp L.5m B.19mm mm/mm EG II ABS m.Magnet SB BMI is a compact pocket tape measure designed for reliable on‑site measuring in workshops and construction, combining a sturdy ABS housing with a magnetic start hook for secure attachment to ferrous surfaces. Robust tape mechanism Shock‑resistant ABS housing with soft grip Automatic recoil with stop function Belt clip for secure carry Magnetic hook at tape start Reliable accuracy for everyday measuring tasks The tape delivers EG class II accuracy, which provides reproducible millimetre readings for typical workshop and trade applications; this level of precision is suitable when consistent, verifiable measurements are required without laboratory conditions. The magnetic hook secures the tape to steel profiles and sheet material, reducing the need for a second pair of hands and allowing single‑person operation. The scale is printed in mm/mm, making it straightforward to read and compare values on site. Designed for practical, comfortable use A housing made from ABS with a soft tactile component ensures a firm grip even when handling tools with oily hands; this reduces slippage and increases operator confidence during repetitive measuring. The unit features an automatic recoil combined with a stopper mechanism that prevents sudden retraction when measuring long spans, protecting the blade and improving safety. A spring‑sturdy tape mechanism prolongs service life and keeps maintenance demands low, helping to reduce downtime in busy workshop environments. Compact convenience that speeds up workflows The compact pocket format and integrated belt clip make the measure easy to carry and ready for immediate use, so measurement tasks start and finish faster. The tape's robust construction resists impacts from daily handling and the magnetic hook speeds alignment on structural steel, saving time during layout and verification. For facilities that value practical, durable tools, this pocket tape measure supports smoother procedures and a clear reduction in small‑scale measurement errors. For availability and technical advice on the BMI twoComp pocket tape measure, contact Metav Werkzeuge for tailored support from our Emmerich location and assistance with procurement or compatibility checks. Technical data Article number: 4000855889NW Type: twoCOMP Product type: Pocket tape measure Brand: BMI Facts Length: 5 m Blade width: 19 mm Scale: mm/mm Accuracy: EG class II Special features Housing: ABS with soft grip component Robust tape mechanism Automatic recoil with stopper Belt clip Magnetic hook at tape start Packaging: SB FAQ What level of accuracy can be expected from this tape measure? The tape measure meets EG class II accuracy, which ensures consistent millimetre readings for general workshop and trade tasks. Is the housing suitable for rough workshop use? Yes, the ABS housing with a grippy soft component is built for daily handling and resists common impacts encountered in workshop environments. Can the magnetic hook be used on thin sheet metal? The magnetic hook is intended to aid attachment to ferrous materials; on thin or non‑ferrous sheets, performance will depend on the substrate and may require a second operator. What is the article number for ordering or reference? This pocket tape measure is listed as SKU 4000855889NW and marketed under the BMI twoComp type for quick identification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5m Tape Measure Vario 16mm Dual-Scale EG Class II ABS Automatic Stop Button - BMI
Data conflict for SKU 4000855013NW: the housing material is listed as both "glass‑fibre reinforced polyamide" and "ABS". Please verify the correct material before further processing, as this discrepancy could lead to potential issues in manufacturing, quality control, or supply chain management, and it is essential to ensure that the correct material is identified and confirmed to avoid any misunderstandings or errors that might arise during production or assembly; additionally, clarifying this information will help maintain consistency in documentation and prevent any delays or complications in meeting customer requirements or regulatory compliance standards.
600 mm Working Scale 40 x 5 mm With Millimetre Graduation DIN 866/B - Metav IndustryLine
Take advantage of a 600 mm working length, ground special steel construction, and clear millimetre graduation for reliable large‑format layout and marking. Order the working scale directly via Metav Werkzeuge or consult our team for application advice and availability. Metav IndustryLine Working Scale M214.713 – 600 x 40 x 5 mm, DIN 866/B, millimetre graduation The Metav IndustryLine working scale M214.713 is a heavy‑duty, ground steel rule designed for precise layout and marking of larger components in metalworking and fabrication. 600 mm working length Ground special steel profile Conforms to DIN 866/B Precise millimetre graduation Precision for repeatable layout on large components The 600 mm length combined with a ground special steel profile provides a straight, stable reference for scribing and marking. Compliance with DIN 866/B guarantees that the scale meets established flatness and graduation standards, so measurements and transfer marks remain reliable over repeated use. The mm graduation is optimised for quick, unambiguous readings during layout operations, reducing rework and cycle time in the workshop. Robust construction that endures shop use A ground surface finish and solid profile give the scale mechanical resistance and long service life under typical workshop conditions. At approximately 1.2 kg, the rule is heavy enough to lie flat during marking yet light enough for single‑person handling. Its build quality suits plant‑level tasks and assembly‑line layout where a Large (500–1,000 mm) measuring range is required, combining reach with the rigidity necessary to maintain accuracy across the full length. Practical handling that speeds up daily work The millimetre divisions are clearly engraved and contrasted for rapid visual recognition when marking or checking dimensions. The robust edges are suitable for use with scribers and layout punches, and the flatness of the rule supports accurate baseline transfers. For workshops that require traceable calibration or integration into quality procedures, Metav Werkzeuge can advise on available services and documentation to match internal control systems. Contact Metav Werkzeuge in Emmerich to confirm stock status and discuss how the Metav IndustryLine working scale M214.713 fits specific layout or inspection workflows Technical data SKU: M214.713 GTIN: 4054469109558 Label: Arbeitsmaßstab 600 x 40 x 5 mm DIN 866/B, mit mm-Teilung Material: Spezialstahl, geschliffen Standard: DIN 866/B Facts Length: 600 mm Width: 40 mm Thickness: 5 mm Weight: 1.2 kg Tariff number: 90178010 Special features Millimetre graduation Ground surface for flatness Conforms to DIN 866/B Classified for Large (500–1,000 mm) measuring range FAQ What material is the rule made from? The Metav IndustryLine working scale M214.713 is made from special steel, ground, which gives a stable reference edge and good wear resistance. Is this scale suitable for metal layout and scribing? Yes, the M214.713 is intended for layout work on metal and other robust materials; the flat, ground profile and clear mm graduation support precise scribing and marking. Does the scale meet any industrial standards? The working scale conforms to DIN 866/B, ensuring standardised graduation spacing and surface flatness for reproducible measurements. How long is the working range and what does that imply? With a 600 mm working range, the rule falls in the Large (500–1,000 mm) category, offering the reach needed for larger components while retaining stiffness for accurate transfers. How should the rule be stored to preserve accuracy? Store the Metav IndustryLine working scale flat or hung by a protective edge to avoid bending; keep it dry and away from corrosive environments to maintain the ground surface. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600 mm Workshop Rule 40 x 5 mm Ground Special Steel - Metav IndustryLine
Taking advantage of a ground special steel construction and a compact 600 mm working length results in reliable, repeatable layout work and easy handling on the shop floor; precise alignment and robust contact surfaces minimise rework and downtime. Order the workshop ruler directly via Metav Werkzeuge or contact the sales team for application advice. Workshop ruler 600 x 40 x 5 (M214.703) — Ground special steel, 600 mm measuring bar by Metav IndustryLine The Workshop ruler 600 x 40 x 5 is a durable, ground special-steel measuring bar designed for precision layout, marking and simple dimensional checks in general workshop and production environments. Ground special steel construction 600 mm working length 40 mm width for rigidity Flat finish for stable contact Precise layout and repeatable results for everyday tasks The ground special-steel surface delivers a consistently flat reference that supports repeatable layout and marking tasks. Thanks to the 600 mm working length and 40 mm profile, the rule combines reach with stiffness, reducing deflection during use and ensuring that measurements remain consistent across repeated operations. The flat finish provides reliable contact for scribes, punches and dial gauges, making the tool suitable for routine workshop quality checks and setup tasks where speed and dependability matter. Built for robustness and straightforward handling A workshop-focused design means the ruler tolerates the rougher conditions of a production environment without compromising function. The special steel, ground construction resists wear on the contact surfaces and maintains straightness over time, which lowers the frequency of replacement and reduces unplanned downtime. The absence of a chamfer keeps one edge fully usable as a reference face for marking and clamping, while the compact cross-section facilitates single-person handling and quick positioning on benches or fixtures. Practical integration into shop workflows This measuring bar supports rapid measurements and marking without complicated setup: its clear geometry aids fast alignment and it fits standard workshop tool racks and storage. The robust format is compatible with visual inspection, layout operations and simple comparative gauging; calibration is straightforward when required and identification via the M214.703 SKU and GTIN assists inventory management. For teams seeking a dependable, low-maintenance reference bar, the product offers a pragmatic balance of stability and usability. Request Metav Werkzeuge’s supply information for the Metav IndustryLine workshop ruler M214.703 and receive guidance from the Emmerich-based team to ensure the ruler matches specific workshop requirements Technical data Article number: M214.703 GTIN: 4054469109480 EClass: 21170122 Tariff number: 90178010 Manufacturer: Metav IndustryLine Facts Length: 600 mm Width: 40 mm Thickness: 5 mm Material: special steel, ground Special features Ground surface for stable reference Without chamfer for full-edge use Workshop-optimised geometry Category: Lineale FAQ What is the primary application of this ruler? The workshop ruler M214.703 from Metav IndustryLine is intended for layout, marking and basic dimensional checks in workshop and production settings. Is the ruler suitable as a reference for scribing and clamping? Yes, the ground special-steel face of the Metav IndustryLine workshop ruler provides a stable reference surface suitable for scribing, clamping and comparative checks. How is the ruler identified for inventory and procurement? Identification is via the article number M214.703 and GTIN 4054469109480, which are printed or recorded for ordering and stock control. Can the ruler be used on a hard-wearing shop floor without rapid wear? The ground special-steel construction of the workshop ruler is designed to resist normal workshop wear and maintain functional flatness over extended use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Steel Scratch Gauge Hardened Ground Lapped DIN 874/0, 2kg - Metav IndustryLine
Take advantage of the combination of stainless steel construction, DIN 874/0 flatness, and a stable 600 mm working length for reliable workshop inspection and layout tasks; order the hairline straight edge directly via Metav Werkzeuge or contact our consultants for application advice. Hairline Straight Edge M214.126 — stainless steel, DIN 874/0, 600 mm (Metav IndustryLine) The Hairline Straight Edge M214.126 is a hardened, ground and lapped stainless steel reference tool designed for flatness checks, layout work and inspection tasks in workshop and metrology environments. Hardened stainless steel construction Lapped and ground flatness surface Conforms to DIN 874/0 accuracy Precise flatness control for inspection benches The straight edge is manufactured from stainless steel, fully hardened, ground and lapped to provide a consistently flat reference over its length. Conformity with DIN 874/0 signals the highest tolerance class for straight edges, which translates into repeatable visual and feeler‑gauge checks during acceptance testing or daily inspection routines. The measured flatness and surface finish reduce measurement uncertainty when comparing workpieces or setting up inspection fixtures, offering a pragmatic way to maintain quality without requiring specialised laboratory equipment. Robust construction that supports daily workshop use A robust mass of 2 kg and the choice of stainless steel provide both stability and corrosion resistance for routine handling on the shop floor. The hardened construction resists wear from scribing and light contact, while the lapped surface ensures minimal local deviation when performing lay‑out scribing or edge alignment. This combination of durability and stable geometry helps to shorten setup times and reduces the frequency of rework caused by unreliable references, improving throughput in production and maintenance workflows. Practical dimensions and traceable identification for quality processes With a working length of 600 mm, the tool bridges bench‑scale inspection and larger format layout tasks, making it suitable as a universal reference for many machine‑shop applications. The item is identified as SKU M214.126 with GTIN 4054469106762, which supports traceability in procurement and stock systems. The straight edge functions as a comparative reference for flatness checks and alignment; for documented calibrations or laboratory standards, integration into a traceable measurement chain is recommended to complement workshop checks and maintain quality records. Enquire with Metav Werkzeuge for application guidance or to request the Metav IndustryLine Hairline Straight Edge M214.126 for your inspection bench — our specialists in Emmerich can advise on fitment and use. Technical data SKU: M214.126 GTIN: 4054469106762 ECLASS: 21170120 Customs tariff: 90173000 Facts Length: 600 mm Weight: 2 kg Standard: DIN 874/0 Special features Material: stainless steel, fully hardened, ground and lapped Category: rulers / straight edges Intended use: flatness checks, layout, inspection FAQ Is this straight edge suitable for precision inspection work? The Hairline Straight Edge M214.126 from Metav IndustryLine meets DIN 874/0 and is intended for workshop‑level flatness checks and layout tasks where a high‑quality visual reference is required. How should the straight edge be maintained to preserve accuracy? Regular cleaning, avoidance of knocks and storage in a dry area preserve the ground and lapped surface; minor handling wear can be monitored with feeler gauges and routine visual inspection of the reference edge. Can the tool be used for alignment and scribing? Yes — the weight and straightness of the 600 mm edge make it suitable for scribing, alignment and comparative checks on machine beds and assemblies. Is the material corrosion‑resistant for use in humid workshops? Constructed from stainless steel, the straight edge offers good resistance to corrosion for typical workshop environments; standard care further extends service life. How is the product identified for procurement and inventory? The item is listed as SKU M214.126 with GTIN 4054469106762 to support ordering and traceability in stock systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Steel Straightedge Blackened Ground Lapped, DIN 874/0 - Metav IndustryLine
Combine DIN 874/0 reference accuracy with a hardened, ground and lapped tool-steel blade and a compact 600 mm length for dependable alignment and inspection. Order the Precision Straightedge 600 mm DIN 874/0 directly via Metav Werkzeuge or ask our consultants if needed. Precision Straightedge 600 mm DIN 874/0 — hardened tool steel, blackened finish (Metav IndustryLine) The Precision Straightedge 600 mm DIN 874/0 is a hardened, ground and lapped reference blade intended for alignment, inspection and workshop metrology tasks. DIN 874/0 certified reference accuracy Hardened, ground and lapped tool steel 600 mm measuring length for workshop tasks Blackened finish reduces glare and corrosion Accurate reference for alignment and inspection The straightedge serves as a stable reference for run‑out checks, squareness verification and surface alignment thanks to its DIN 874/0 classification. This class denotes the highest tolerance within the DIN 874 standard for straightness, which translates into a measurable reduction in setup time and rework during assembly and inspection. By providing a verified straight datum, the blade supports reproducible results in both manual checks and comparison procedures. Robust construction for everyday workshop use Constructed from hardened tool steel that is ground and lapped, the blade combines stiffness with a finely finished measuring face to resist wear under frequent handling. The mass—approximately 2 kg—adds stability during contact measurements and helps maintain consistent contact pressure when used against heavy parts. The combination of heat treatment and lapping ensures the tool keeps its flatness over time, reducing the need for frequent reconditioning. Practical dimensions that suit standard metrology tasks At 600 mm, this straightedge covers the most common inspection range in mechanical workshops and small jig and fixture assembly. The length offers an optimal balance between reach and rigidity, making the blade easy to manoeuvre while still suitable for checking medium‑sized components and tables. The preserved datum edge allows for quick comparison checks against machine beds, vises and gauge blocks without excessive handling. Visibility and longevity designed into the finish The blackened finish reduces surface glare under workshop lighting and provides a degree of corrosion protection for the steel substrate, extending service life in everyday environments. Precision lapping of the measuring face improves tactile feedback during contact measurements and minimises the risk of introducing measurement errors. For storage, a clean, dry environment is recommended to preserve the finish and the flatness of the reference faces. Choose the Metav IndustryLine Precision Straightedge for reliable workshop references and contact Metav Werkzeuge in Emmerich for detailed specifications and supply Technical data SKU: M214.026 GTIN: 4054469106175 Manufacturer: Metav IndustryLine Standard: DIN 874/0 Facts Length: 600 mm Weight: 2 kg Special features Material: Tool steel, fully hardened, ground and lapped Finish: Blackened (schwarz bruniert) Category: Straightedge / Lineal Tariff number: 90173000 FAQ What level of straightness tolerance does this straightedge provide? The Precision Straightedge 600 mm DIN 874/0 meets the straightness tolerance defined by DIN 874/0, providing the highest class accuracy for visual and tactile reference measurements. Is the blade suitable for use on heavy machine beds and fixtures? Yes. The hardened, ground and lapped construction of the straightedge ensures durable flatness for use as a reference against machine beds, vises and fixtures; the 600 mm length is appropriate for medium‑sized components. What protective properties does the blackened finish offer? The blackened finish on the straightedge reduces glare under bright workshop lighting and offers basic corrosion resistance to protect the steel surface during regular use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Wooden Case For Hairline Scale For 500 And 600 Hairline Scales - Metav IndustryLine
Take advantage of a robust wooden transport case that protects delicate hairline rulers, combines lightweight handling with secure workshop storage and ensures organised tool management; order the item directly via Metav Werkzeuge or consult our specialists for availability and procurement advice. Wooden Case for 600 mm Hairline Ruler (fits 500/600 mm) — Metav IndustryLine Wooden Case for 600 mm Hairline Ruler — a protective storage and transport solution for precision hairline rulers used in workshop and inspection environments. Fits 500 and 600 mm hairline rulers Robust wooden transport case Secure storage for precision instruments Protects precision instruments during transport and storage A purpose-made wooden case delivers reliable protection for measurement tools that demand careful handling. Constructed to house standard hairline rulers up to 600 mm, the box reduces the risk of shocks and knocks in transit and prevents surface damage that can impair measurement accuracy. The combination of robust construction and compact design makes the case a practical choice for workshops and inspection benches where tool preservation and repeatable accuracy matter. Keeps the workshop organised and instruments ready for use Clear organisation reduces downtime: a designated wooden storage box creates a defined place for hairline rulers so they are readily accessible when needed. The low weight of the box (approx. 2 kg) supports easy two-handed handling and straightforward placement on shelving or in vehicles. By keeping instruments protected between uses, the case contributes to longer service life of precision items and minimises the frequency of repairs or replacements, delivering a tangible efficiency improvement to routine measurement workflows. Practical material choice with long-term usability Wood was selected as the enclosure material for its combination of durability and repairability compared with many lightweight synthetics. The plain, solid construction supports simple maintenance and contributes to a professional workshop appearance. For businesses that prioritise reliable storage without complex packaging, this wooden case presents a straightforward solution that complements other precision equipment and aligns with standard workshop logistics. For procurement, availability checks and tailored advice on incorporating this Metav IndustryLine wooden case into workshop tool management, contact Metav Werkzeuge for prompt support and ordering information. Technical Data Article number: M214.026.K GTIN: 4054469106182 Facts Weight: 2 kg Compatible length: fits up to 600 mm Special features Material: wood Suitable for: hairline rulers 500 mm and 600 mm Category: rulers / measuring instruments FAQ Is this case suitable for 500 mm hairline rulers? Yes. The wooden case is designed to accommodate both 500 mm and 600 mm hairline rulers and offers protection during storage and transport. What is the weight of the wooden case? The case weighs approximately 2 kg, providing a balance between sturdy protection and manageable handling. Can the case be used for other measuring tools? The case is intended for hairline rulers up to 600 mm; other slim measuring tools of similar dimensions may also be stored, provided they fit without forcing the lid closed. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Workshop Aluminium Ruler With Mm Graduation, Anodised - Metav IndustryLine
Take advantage of a 600 mm straight edge that combines anodised aluminium resilience with a clear mm scale and a non-reflective finish for dependable everyday measuring; order directly via Metav Werkzeuge or consult our specialists for application advice. Workshop ruler M203.054 — Anodised 600 mm aluminium, mm scale (Metav IndustryLine) The Workshop ruler M203.054 is a robust, anodised aluminium measuring rule intended for general workshop marking, setup tasks and quick length checks across metalworking and woodworking applications Anodised aluminium profile Precise mm graduation Non-reflective satin finish Lightweight 600 mm length Reliable measurements for daily workshop tasks The straight profile provides a stable reference for everyday marking and checking tasks. Made from anodised aluminium, the rail resists corrosion and retains its appearance under regular use, while the mm scale delivers straightforward, easily readable graduations for quick verification of lengths up to 600 mm. The combination of a clear scale and a rigid section reduces measuring uncertainty compared with improvised straight edges, which supports faster, more reliable set-ups on the shop floor and at inspection benches. Practical handling that reduces errors and speeds work A matt, non-reflective finish minimises glare under workshop lighting, making it easier to read the graduations without eye strain. The compact cross-section (50 × 5 mm) keeps the rule lightweight (approximately 0.2 kg) yet sufficiently stiff for routine marking and transfer measurements. These qualities translate into time savings: fewer repeated checks, simpler alignment against edges and fixtures, and consistent results when used for layout, scribing or as a partner for square and gauge work. Integration, sourcing and confidence for the production line As part of the Metav IndustryLine, the rule fits a pragmatic procurement strategy focused on reliable stock and predictable delivery. The compact, durable design is suitable for workbenches, tool trolleys and inspection kits, and the clearly specified dimensions simplify inventory and tool lists. Metav’s position as a dependable supplier underlines the product’s role in democratising precision: high-quality measuring aids available to small shops and large workshops alike, backed by a documented supply chain and customer base that values consistency. Contact Metav Werkzeuge for availability, technical details and to secure the Metav IndustryLine 600 mm anodised workshop ruler, SKU M203.054. Technical Data Article number: M203.054 GTIN: 4054469183374 Manufacturer: Metav IndustryLine Facts Length: 600 mm Width: 50 mm Thickness: 5 mm Weight: 0.2 kg Special features Material: Anodised aluminium Scale: mm division Finish: Non-reflective (matt) Category: Rulers ECLASS: 21170122 FAQ What material is the rule made from? The rule is manufactured from anodised aluminium, which delivers corrosion resistance and a durable surface suited to everyday workshop use. How precise is the printed scale? The printed mm scale provides clear graduations for general-purpose measuring and marking; the format is intended for rapid length checks rather than traceable calibration-required measurement tasks. Is the surface reflective under typical workshop lighting? No; the ruler has a non-reflective, satin finish to reduce glare and improve legibility in bright or angled light conditions. Can the rule be used for scribing and layout on metal and wood? Yes; the straight, rigid profile and clear mm division make it suitable for scribing, marking and layout operations on common workshop materials. Which SKU should be referenced when ordering? Reference SKU M203.054 or the GTIN 4054469183374 when enquiring about this anodised 600 mm workshop ruler. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Workshop Rule 40mm Wide 5mm Thick Bevelled Edge Ungraduated, Special Steel - Metav IndustryLine
Combine the 600 mm working length, the ground special steel construction and the faceted edge to secure reliable alignment and long service life; order the workshop ruler directly via Metav Werkzeuge or consult our advisors for further specifications. Workshop ruler M214.723 — 600 × 40 × 5 mm, faceted, ground special steel (Metav IndustryLine) The Workshop ruler M214.723 is an ungraduated, heavy-duty straightedge designed for layout, marking and alignment tasks in busy workshops and toolrooms. 600 mm working length for large-format layouts Ground special steel for long-term durability Faceted edge for reliable alignment and stop Solid 5 mm thickness for stiffness and stability Stable reference over long runs for consistent layout results The 600 mm length combined with a 5 mm thickness and 40 mm face provides a rigid reference that resists bending during marking and scribing. Manufactured from ground special steel, the bar keeps a flat, wear-resistant surface that secures repeatable contact across its full length. The listed mass of 1.2 kg gives the rule useful inertia when used as a straightedge or clamping reference, reducing the tendency to shift during scribing or transfer operations. Faceted edge and ungraduated design for versatile workshop use A faceted edge simplifies alignment against stops and faces, enabling quick transfer of edges and concise layout lines without distraction from scale markings. The absence of graduations makes the bar particularly suitable as a precision straightedge, layout rule or inspection reference where a clean, uninterrupted bearing surface is required. The ground finish further minimises burrs and ensures a secure seating against workpieces and fixtures, supporting accurate marking on steel, wood or composite materials. Engineered for everyday industrial demands with Metav quality control This solid workshop rule is built for repetitive use in fabrication, maintenance and jig-making environments where durability and a reliable datum are essential. The ground special steel construction balances toughness with dimensional stability so that routine handling, clamping and light impacts do not compromise its reference function. Supplied under the Metav IndustryLine, the component benefits from the company’s quality filter in Emmerich, which supports consistent availability and traceability for professional buyers. Secure the Metav IndustryLine workshop ruler through Metav Werkzeuge for dependable layout precision; contact our advisors at info@metav-werkzeuge.com or call +49 2822 7131930 for technical clarifications and ordering support Technical data Article number: M214.723 GTIN: 4054469109626 Tariff number: 90178010 Weight: 1.2 kg Material: ground special steel Facts Length: 600 mm Width: 40 mm Thickness: 5 mm Special features Faceted edge Without graduations (ungraduated) Ground surface finish Category: rulers (Lineale) Brand: Metav IndustryLine FAQ Is the ruler graduated for direct measurement? The workshop ruler M214.723 is supplied without graduations; it is intended as an ungraduated straightedge and layout tool rather than a scale for direct measurements. What material and finish does the bar have? The bar is made of ground special steel, which provides a wear-resistant, flat bearing surface suitable for layout and marking tasks. Is this ruler suitable for heavy workshop use? Yes, the construction and 5 mm thickness deliver stiffness and robustness for daily use in fabrication, maintenance and jig-making applications. Can the ruler be used as a reference for clamping or fixturing? The faceted edge and rigid profile make the M214.723 suitable as a datum for alignment, clamping and transfer operations where a straight, unmarked bearing is required. What is the exact product identifier for ordering? Order under SKU M214.723 / GTIN 4054469109626; the item is part of the Metav IndustryLine range and is supplied via Metav Werkzeuge. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Workshop Rule With Bevel And Millimetre Scale, Ground Special Steel - Metav IndustryLine
Take advantage of a robust measuring tool that combines ground special steel, a chamfered edge and clear millimetre graduation for reliable layout and verification in metalworking. Order the workshop ruler directly via Metav Werkzeuge or consult our specialists for application advice. Workshop ruler M214.733 — 600 x 40 x 5 mm, chamfered, ground special steel The Workshop ruler M214.733 is a heavy-duty steel rule designed for precise linear measurement and layout work in general fabrication and metal workshops. Durable ground special steel construction Precise millimetre graduation for clear readings Chamfered edge for accurate alignment and reduced burrs Solid 600 x 40 x 5 mm profile for workshop tasks Lasting accuracy from robust construction The ruler is manufactured from ground special steel, a choice that gives a stable, wear-resistant measuring edge and consistent flatness over time. The 600 x 40 x 5 mm cross-section provides a stiff profile that reduces flex and improves repeatability when marking or checking parts on a bench. Thanks to the ground finish, reflections are minimised and the scale stays legible under workshop lighting, ensuring reliable results across routine inspection and layout tasks. Clear graduations and practical edge geometry A straight, chamfered edge with millimetre graduation supports quick, unambiguous measurements and clean scribing along the line. The chamfer (facetted) edge helps to avoid catching on burrs and makes it easier to align the rule against edges and faces, which speeds up marking operations and reduces the chance of misalignment. The combination of readable divisions and a low‑distortion surface reduces measurement uncertainty in everyday tasks. Designed for the workshop environment The overall format and finish suit hard‑wearing use in assembly, maintenance and general fabrication. The tool’s mass and profile give it a stable hand feel during layout work and it integrates easily with other measuring aids and marking tools. As part of a workshop kit, the ruler supports efficient workflows by providing a dependable reference for straightness, length checks and scribing operations without requiring specialised fixtures. For project-specific advice or to secure the Workshop ruler M214.733 from Metav IndustryLine for routine layout and inspection tasks, contact Metav Werkzeuge in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: M214.733 GTIN: 4054469109695 Brand: Metav IndustryLine Category: Lineale Material: Ground special steel Facts Length: 600 mm Width: 40 mm Thickness: 5 mm Weight: 1.0 kg Special features Chamfered edge (facetted) Millimetre graduation Ground surface finish Workshop ruler for layout and inspection FAQ What is the exact length and cross section of the ruler? The Workshop ruler M214.733 has a length of 600 mm with a cross section of 40 x 5 mm, providing a stiff profile suitable for workshop layout. Which material is used for this ruler and why does it matter? The M214.733 is made from ground special steel; the ground finish improves flatness and legibility, which helps maintain measurement reliability in daily use. Is the scale readable in standard workshop lighting? Yes, the millimetre graduation combined with the ground surface of the Workshop ruler M214.733 delivers clear contrast and low reflection for easier reading during marking and inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
750mm Assembly Ruler Double-T Aluminium‑Magnesium Alloy Grade 0, 60mm Height, 30mm Width, HV80 Hardness - Metav IndustryLine
The combination of Grade 0 flatness and a lightweight Aluminium‑magnesium alloy body ensures consistent alignment results and easy handling on the shop floor. Benefit from precise 0.005 mm flatness and parallelism for reliable fixture set-up; order the straightedge directly via Metav Werkzeuge or contact the technical team for application advice. Assembly straightedge M214.743 — 750 × 60 × 30 mm, AlMg alloy, Grade 0 (Metav IndustryLine) A precise Assembly straightedge M214.743 designed for flatness-critical alignment and repeatable fixture set-up in industrial metrology and assembly work. 750 × 60 × 30 mm aluminium-magnesium alloy Grade 0 flatness 0.005 mm tolerance Hardness HV 80 for wear resistance Lightweight design at 1.2 kg for handling Consistent alignment through measurable precision The straightedge delivers repeatable positioning thanks to its Grade 0 specification, with both flatness and parallelism rated at 0.005 mm. These measurable tolerances make the tool suitable for quality control and alignment tasks where traceable reproducibility reduces rework and saves production time. The strict geometric specifications support fast decision-making in inspection steps and help to maintain a defined reference across multiple set-ups. Lightweight alloy construction with industrial endurance Constructed from an Aluminium‑magnesium alloy, the beam balances low mass and structural rigidity for workshop use. At 1.2 kg, the component is easy to manoeuvre while the surface hardness of HV 80 provides resistance to wear in regular handling. The stated yield strength (110 kg/mm²) and tensile strength (47 kg/mm²) indicate a material chosen for dimensional stability under typical assembly loads, offering longevity without significant weight penalties. Practical benefits for fixture set-up and inspection With overall dimensions of 750 × 60 × 30 mm, this straightedge spans medium-format assemblies and fixturing tasks while remaining compact enough for frequent repositioning. The design supports rapid visual and tactile checks when establishing datum lines or checking mating surfaces. In environments where consistent reference geometry shortens alignment cycles, the tool functions as a dependable workshop standard and integrates well into existing inspection procedures. Contact Metav Werkzeuge today to discuss how the Assembly straightedge M214.743 fits into current set-ups or to request detailed specifications and procurement assistance from the Emmerich team Technical data Article number: M214.743 GTIN: 4054469184517 ECLASS: 21170122 Core specifications Dimensions: 750 × 60 × 30 mm Weight: 1.2 kg Flatness: 0.005 mm Parallelism: 0.005 mm Hardness: HV 80 Features & materials Material: Aluminium‑magnesium alloy Yield strength: 110 kg/mm² Tensile strength: 47 kg/mm² Category: Lineal / measuring device FAQ What applications is this straightedge suited for? The Assembly straightedge M214.743 is suitable for fixture alignment, reference checks and flatness verification in machining and assembly tasks where Grade 0 tolerances are required. Does the product include a calibration certificate? The product description does not state calibrated delivery; calibration options and certificates can be provided on request by Metav Werkzeuge for shop-floor or laboratory requirements. How does the alloy construction affect handling and durability? The Aluminium‑magnesium alloy combines low weight with good stiffness, enabling simple handling at 1.2 kg while the HV 80 surface hardness helps resist wear during routine use. Can the straightedge be used as a reference for inspection gauges? Yes, the specified 0.005 mm flatness and parallelism make the tool suitable as a working reference for comparative checks and set-up verification in quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75mm Hairline Gauge Stainless Steel, Hardened, Ground And Lapped, DIN 874/00 - Metav IndustryLine
Take advantage of a compact, workshop-ready solution that combines DIN 874/00 conformity with fully hardened, ground and lapped INOX stainless steel for consistent layout and vernier tasks; order directly via Metav Werkzeuge or consult the specialists for application advice. Hairline ruler INOX 75 mm DIN 874/00 — compact precision hairline ruler (Metav IndustryLine) A Hairline ruler INOX 75 mm DIN 874/00 designed for fine mechanical measurement and layout work where a slim, corrosion‑resistant straight edge and clear hairline definition are required. Hardened, ground and lapped INOX steel Compact 75 mm length for fine work Conforms to DIN 874/00 Precision where small dimensions matter The compact straight edge is manufactured from INOX stainless steel that is hardened, ground and lapped, producing a stable reference surface with minimal runout. The short length and refined finish make this hairline gauge ideal for tasks that demand repeatable marking and inspection in restricted spaces. Because the metallic surface is corrosion‑resistant, the tool maintains accuracy over time with straightforward cleaning, giving a reliable baseline for layout, comparison and vernier measurements in workshops and inspection benches. Why the DIN standard and surface treatment improve results Conformity with DIN 874/00 signals a measured approach to dimensional and surface tolerances; this standard ensures the hairline edge meets expected flatness and finish criteria for workshop use. The combination of surface lapping and grinding reduces microscopic irregularities that could otherwise shift a mark or reading. In practice, this means fewer rechecks, reduced scrap and faster throughput on small assemblies where the definition of the hairline itself becomes the decisive factor. Designed for everyday workshop integration A short straight edge excels in repeatable, one‑hand layout operations and precision marking on small housings, shafts and fittings. The compact format fits in tool trays and pockets, simplifying workflow by keeping a precision reference at hand. For production environments that value predictable processes, this type of instrument supports quick visual checks and fine adjustments without the overhead of larger metrological equipment. As a practical benefit, the rust‑resistant steel eliminates common concerns about surface deterioration that can compromise markings and measurements. Contact Metav Werkzeuge to discuss the Metav IndustryLine INOX hairline ruler and secure the compact precision tool tailored to fine measurement tasks Technical data SKU: M214.119 GTIN: 4054469106670 Brand: Metav IndustryLine Tariff code: 90173000 Core measurements Length: 75 mm Standard: DIN 874/00 Special features Material: INOX stainless steel, hardened, ground and lapped Finish: precision lapped surface for defined hairline Application: layout, marking and vernier comparison tasks FAQ What sizes are available for similar hairline rulers? This item is the 75 mm version; comparable products from the same range are typically offered in longer lengths for larger assemblies. Is the surface resistant to corrosion? Yes, the INOX stainless steel construction gives the hairline ruler good corrosion resistance while preserving the precision finish. Can this ruler be used for vernier or comparative measurements? The hardened and lapped reference edge is suitable for vernier comparisons and layout checks where a defined straight edge is required. What does DIN 874/00 guarantee for this tool? Compliance with DIN 874/00 indicates adherence to accepted flatness and finish standards for small straight edges, ensuring consistent performance for shop use. Is the product suitable for use in assembly jigs and fixtures? The compact size and stable hardened surface make the instrument well suited for fixture setup and fine alignment tasks in small assemblies. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75mm Hairline Ruler Blackened Tool Steel, Hardened Ground And Lapped, DIN 874/00 - Metav IndustryLine
Take advantage of a compact 75 mm format combined with DIN 874/00 standardisation and a fully hardened, ground and lapped tool-steel construction for reliable layout and repeatable reference lines; order the hairline ruler directly via Metav Werkzeuge or ask our consultants if needed. Hairline ruler M214.019 — 75 mm, hardened tool steel (DIN 874/00) A hairline ruler intended for precise scribing and inspection tasks in metalworking and fine assembly, offering a durable reference edge in a compact format. DIN 874/00 standardised measuring rule Fully hardened, ground and lapped Compact 75 mm length for fine work Blackened finish for corrosion resistance Reliable standard compliance for repeatable markings The DIN 874/00 conformity ensures that the rule serves as a stable reference for layout and inspection tasks, reducing variability when transferring measurements. With a 75 mm usable length and a fully hardened, ground and lapped surface, the tool provides a flat, wear-resistant edge that maintains accuracy over many cycles. This construction minimises burr formation and keeps scribed lines consistent, which is essential for quality control in small-part production. Robust finish and compact handling for workshop use A blackened finish gives the rule improved resistance to corrosion while reducing surface reflections during marking operations. The compact dimensions make the instrument easy to position and handle in confined spaces, enabling steady, precise work on small components. The combination of hardness and surface finishing reduces the need for frequent replacement, supporting continuous operation in busy workshops and inspection benches. Practical applications and dependable build quality Ideal for precision marking, visual inspection and fine mechanical assembly, the hairline ruler is suited to tool rooms, maintenance shops and electronics assembly where a reliable reference line is required. The hardened and lapped edge resists deformation, supporting repeatable layout work and contributing to faster inspection cycles. Traceability is supported by the clear labelling and standard conformity, helping integrate the tool into routine quality processes. Contact Metav Werkzeuge for procurement advice or to request the Metav IndustryLine hairline ruler M214.019 for your workshop Technical data Article number: M214.019 GTIN: 4054469106076 Standard: DIN 874/00 Length: 75 mm Material: tool steel, fully hardened, ground and lapped, blackened Facts Customs tariff number: 90173000 eClass: 21170120 Special features Category: rulers Finish: blackened (schwarzbruniert) Construction: hardened, ground and lapped surface Intended use: precision scribing and inspection FAQ What is the usable length of this hairline ruler? The ruler provides a 75 mm measuring edge, suitable for fine marking and short-range inspection tasks. Is the edge durable enough for repeated scribing? Yes. The fully hardened, ground and lapped tool-steel edge is designed to resist wear and maintain a reliable reference over prolonged use. What standard does the ruler comply with? This instrument is manufactured to DIN 874/00, ensuring standardised form and function for workshop layout and inspection. Does the finish protect against corrosion? The blackened finish offers improved resistance to surface corrosion and reduces glare during marking operations. Can this ruler be used for precision assembly work? Yes. Its compact format and wear-resistant edge make it well suited to precise assembly and inspection tasks in tool rooms and fine-mechanical workshops. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8 m Twist Tape Measure 25 mm Steel Tape With Belt Clip And Lock, Class II - Metav IndustryLine
Take advantage of the compact 8 m measuring range, robust 25 mm steel tape and secure positive-lock for dependable daily use; lightweight handling and a belt clip keep the measure at hand on the workfloor. Order the instrument directly via Metav Werkzeuge or consult the specialists for specification advice. Pocket tape measure M203.112 — 8 m x 25 mm, ABS case, belt clip (Metav IndustryLine) A pocket tape measure that combines an 8 m reach with a sturdy ABS housing and a belt clip for workshop and trade applications 8 m measuring range, 25 mm steel blade ABS impact-resistant case with belt clip Positive-lock mechanism for secure measurements Accuracy Class II suitable for workshop use Reliable measuring performance for everyday workshop tasks The compact design delivers a consistent measuring range of 8 m on a 25 mm wide steel tape, balancing reach and stability for routine site and workshop work. The instrument meets Class II accuracy, which permits reliable results for general trade and construction tasks while conforming to recognised measuring standards. The tape’s blade geometry and material reduce flutter on extensions, enabling faster, more repeatable readings and fewer retakes to keep processes efficient. Practical handling and durable construction for frequent use Housed in an ABS case, the measure resists impacts and abrasion typical in workshops and on building sites; the belt clip ensures the tool is immediately available without occupying pockets. A positive-lock system secures the blade during layout or transfer measurements, preventing slip and reducing rework. With a net weight of approximately 0.4 kg, the unit is light enough for handheld convenience yet robust enough to withstand everyday handling, making it a dependable companion for technicians and tradespeople. Where this measure adds value in workflows This tape is ideal for carpentry, general building, fitting and metalworking where quick, repeatable linear checks are required. The steel tape suits indoor and sheltered-site use and is compatible with common workshop practices such as marking, templating and quick verification of component dimensions. Its compact form supports mobility across job locations, while the lock and blade stiffness reduce measurement error, supporting smoother production or installation sequences. Contact Metav Werkzeuge today for detailed technical advice or to arrange fast supply from our Emmerich warehouse — our consultants will help specify the right measuring tools for the task at hand. Technical data Article number: M203.112 GTIN: 4054469181721 Label: Pocket tape measure, EC Class II, 8 m x 25 mm, ABS case, lock + belt clip Facts Measuring range: 8 m (0–8000 mm) Blade width: 25 mm Weight: 0.4 kg Accuracy: Class II Special features Material: steel tape ABS case Belt clip Positive-lock mechanism FAQ What accuracy can be expected from this tape measure? The pocket tape measure M203.112 provides Class II accuracy, suitable for standard workshop and site measurements where repeatable results are required. Is the blade material suitable for professional use? Yes, the steel tape blade of the M203.112 is designed for regular trade and workshop applications and offers good stiffness for extended measurements. Does the measure include a locking mechanism? A positive-lock mechanism is fitted, enabling secure blade fixation during transfer and layout tasks to reduce measurement errors. How portable is the instrument for site work? Weighing about 0.4 kg and equipped with a belt clip, the measure is engineered for portability and quick access on site or in the workshop. Can this tape be used for exterior building measurements? The M203.112 is primarily intended for indoor and sheltered-site use; care is advised against prolonged exposure to harsh weather to preserve blade condition and accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800 x 40 x 5 mm Workshop Rule With Chamfer, Unmarked, Hardened Ground Special Steel - Metav IndustryLine
Take advantage of the 800 x 40 x 5 mm profile and ground special steel construction for a robust marking and referencing tool in workshop layout and fabrication. The bevelled edge and ungraduated face provide a reliable guide for scribing and clamping, while procurement and advice are handled directly via Metav Werkzeuge. Werkstatt-Lineal 800 x 40 x 5 — ground special steel, bevelled edge (Metav IndustryLine) A Werkstatt-Lineal 800 x 40 x 5 designed as a heavy-duty workshop rule for precise alignment, scribing and routing tasks in metalworking and general fabrication. Ground special steel construction for flatness and durability Bevelled edge for clear scribing and guide work Plain, ungraduated face suitable for marking templates Consistent reference for layout and machining The long, flat profile of this workshop rule provides a dependable reference line for layout and machine set-up. The 800 x 40 x 5 mm dimensions combine reach with rigidity, reducing flex during use and improving repeatability when clamping against vices or machine fixtures. The ground special steel finish contributes to a stable contact surface and long-term flatness, which translates into fewer alignment errors and less rework in production environments. Emphasis on measurable stability supports quicker set-up times and predictable results. Designed for accurate scribing and clamping operations A bevelled edge on the rule creates a precise face for scribing, letting operators draw clean lines while maintaining a safe clearance for cutting tools. The intentionally plain, ungraduated face avoids visual clutter, making this tool ideal as a datum or template rather than a measuring instrument; it performs best when used in combination with calibrated gauges or micrometre systems for final inspection. This focused functionality supports efficient workflows: faster marking, secure clamping and reliable transfer of reference lines to workpieces. Built for workshop resilience and procurement clarity Manufactured from ground special steel, the rule offers wear resistance and a robust surface for repeated contact with scribes, squares and cutting edges. The simple, engineered form factor minimises failure modes and eases storage. As part of the Metav IndustryLine range, it benefits from centralised supply and quality control—an asset for purchasing departments that prefer consistent sourcing and dependable lead times. Traceability is supported by the article identifiers provided below, enabling straightforward inventory management. Choose the Metav IndustryLine workshop rule for dependable referencing in production — contact Metav Werkzeuge in Emmerich for procurement advice and delivery coordination via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M214.724 GTIN: 4054469109633 Tariff number: 90178010 ECLASS: 21170122 Facts Dimensions: 800 x 40 x 5 mm Category: Measuring instruments / Rulers File reference image available Special features Material: special steel, ground Bevelled edge for scribing and guidance Plain, ungraduated face for template work FAQ What applications suit this workshop rule best? The workshop rule M214.724 is suited to layout, scribing and clamping tasks in metalworking and fabrication where a flat, robust datum is required rather than a graduated measuring scale. Is the surface finish suitable for precision reference work? Yes. The ground finish on the special steel provides a stable, wear-resistant contact surface that supports repeatable referencing and alignment. Does the rule include graduations or markings? No. This product is supplied without graduations; its plain face is intended for use as a datum or template and for guiding scribing operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8000mm Compact Pro Tape Measure 25mm Blade Armor Coating EG Class II - STANLEY
Take advantage of the Compact Pro's combination of compact handling, reinforced blade protection and reliable EG II accuracy to keep measuring tasks fast and precise; order the tool directly via Metav Werkzeuge or contact our consultants for specification advice. Compact Pro pocket tape measure L 8 m × 25 mm, EG II (±0.5 mm/m) – STANLEY The Compact Pro pocket tape measure is a durable, hand-friendly measuring instrument designed for tradespeople and workshops, offering precise measurements up to 8 m with enhanced blade protection and overhead readability. Compact, lightweight housing for secure grip Double-sided print for easy overhead readings BladeArmor® coating reinforces the first 8 cm Accuracy class EG II (±0.5 mm/m) for reliable results Precise measurement that supports efficient workflows The EG II accuracy rating (±0.5 mm per metre) ensures consistent, measurable results across repetitive tasks, making the tape particularly suitable for site work and workshop production where tolerances matter. With a length of 8 m and a 25 mm blade width printed in mm/cm, the instrument balances reach and stability: the wider blade reduces flex on long spans while the clear gradation supports accurate cuts and installations. Technical terms such as EG II relate to European measuring standards; in practice this means fewer rechecks and a reduced risk of material waste during layout and fitting. Robust construction to reduce downtime and repair costs The hardened portion of the blade benefits from BladeArmor® reinforcement over the first 8 cm, strengthening the area most vulnerable to kinks and wear and extending service life. A double-sided print allows readings from either side of the blade, which speeds up overhead or confined measurements, and the multi-end hook provides secure anchoring on edges while compensating for internal and external dimensions. These features together lower maintenance and replacement frequency, supporting a smoother production rhythm and a better return on tool investment. Compact handling that improves speed and comfort A compact, lightweight casing promotes a secure grip and reduces fatigue during long shifts; the integrated belt clip keeps the tape close at hand and ready for immediate use. The casing design and balanced reel action enable quick blade retraction without jerks, which protects the blade print and mechanism. For users who carry multiple tools, the Compact Pro's form factor and fast operability help streamline measuring tasks so that layout, marking and verification take less time per job. Confidence through reliable supply and specialist advice Metav combines broad product availability with practical technical support, offering rapid access to measuring equipment without compromising quality control. If further technical details are required for a specific application, the instrument's design and measured accuracy make it straightforward to assess suitability for metalworking, carpentry and general construction tasks. Metav's role as a dependable distribution partner means consistent stock levels and a direct line for technical clarification when precision requirements are critical. Contact Metav Werkzeuge to discuss the STANLEY Compact Pro for your workshop needs or to request application guidance; call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com for prompt, expert assistance Technical Data Article number: 8002396249NW Type: Compact Pro Product: Pocket tape measure Brand: STANLEY Packaging unit: 1 Dimensions & Accuracy Length: 8 m Blade width: 25 mm Graduation: mm/cm Accuracy: EG II (±0.5 mm/m) Materials & Features BladeArmor® coating on first 8 cm Double-sided print Multi-end hook Belt clip Compact, lightweight design FAQ What measuring accuracy does the tape provide? The STANLEY Compact Pro pocket tape measure delivers EG II accuracy of ±0.5 mm per metre, suitable for general workshop and on-site tasks. How long and wide is the blade? The measuring blade extends to 8 m and has a width of 25 mm, printed in mm/cm for precise graduations. What prevents the blade from kinking at the end? A BladeArmor® coating on the first 8 cm reinforces the most stressed section of the blade, reducing the risk of kinks and early failure. Is the tape suitable for overhead or awkward-angle measurements? Yes, the double-sided print and a stable blade profile enable legible overhead readings and faster measurements in confined spaces. Does the product include a belt clip and a secure hook? The tool features a belt clip for convenient carrying and a multi-end hook for secure anchoring on edges. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8000mm FatMax BladeArmor Tape Measure 32mm Blade, 0.1mm Graduation, Class II - Stanley Black & Decker Deutschland GmbH
Take advantage of the 8 m reach and 32 mm blade combined with durable BladeArmor protection for reliable, long-range site measurement; order the FatMax BladeArmor directly via Metav Werkzeuge or ask our consultants for application-specific advice. FatMax BladeArmor pocket retractable tape measure — 8 m, 32 mm blade (Stanley) The FatMax BladeArmor is a heavy‑duty pocket retractable tape measure designed for construction and workshop tasks, offering long reach and reinforced blade protection for repeatable, precise measurements. BladeArmor protection on first 15 cm Full Mylar coating for blade durability DynaGrip bi-material, shockproof case Large three-rivet sliding hook for accuracy Industrial-grade reach and measurable accuracy The 8 m blade with mm/cm graduation provides a practical balance between reach and readability for both site and workshop tasks. With an accuracy class II (EG II) rating, this tape measure supports compliance checks and everyday dimensional control where trace-level calibration is not required but consistent repeatability matters. The combination of a 32 mm blade width and the tape’s stiffness enables longer free‑standing extension, helping to measure across spans with fewer helpers and fewer re‑measurements. Where nominal values and comparison are critical, the clear metric scale and the controlled blade behaviour reduce measurement uncertainty and speed up workflows. Blade protection and long service life Built to resist the knocks and abrasion of daily use, the blade features a BladeArmor film on the first 15 cm which cuts the risk of breakage dramatically, while the full Mylar protective coating preserves print and edge quality along the entire length. These protective layers limit edge wear and ink fading, so scale markings remain legible after prolonged use. For operations that demand continuous uptime, these protective technologies lower the lifetime cost by extending the blade’s usable life and reducing downtime for replacement. Secure handling and error‑reduction on the job Ergonomics and secure measurement are addressed through the DynaGrip bi‑material housing, which is both slip‑resistant and shockproof, and a large, three‑rivet sliding hook that can be repositioned for internal and external measurement. The lock (feststeller) and controlled rewind mechanism protect the hook and blade from impact during retraction, while the belt clip keeps the tool close at hand. These features combine to reduce user error, speed repeated measuring operations and protect the tape from common site hazards. Practical fit for workshop and site workflows Designed for tradespeople, surveyors and maintenance professionals, this pocket tape delivers practical advantages: extended single‑person reach, durable marking readability and robust housing for rough environments. As part of a procurement strategy, selecting a tape with these attributes supports process reliability and reduces the frequency of tool replacement. Metav’s role as a precision partner amplifies this benefit: stock is managed from Emmerich with a focus on consistent quality control and dependable supply for industry and craft — a pragmatic solution for businesses that require repeatable measurement performance. For contractors and workshop managers who need a resilient 8 m tape with reinforced blade protection, purchase the FatMax BladeArmor via Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for specialist advice and reliable supply from Emmerich. Technical data Article number: 4000787123NW Product name: FatMax BladeArmor Label: Taschenrollbandmaß FatMax L.8m B.32mm mm/cm EG II Ku.Festst.SB STANLEY Manufacturer: Stanley Black & Decker Deutschland GmbH Facts Length: 8 m Graduation: mm/cm Blade width: 32 mm Accuracy: EG II Packaging unit: 1 Special features Blade extends horizontally up to 3.35 m without bending First 15 cm coated with BladeArmor film (reduced break risk) Full Mylar protective coating on blade Controlled rewind and automatic return Large, three‑rivet sliding hook for internal/external measurement DynaGrip bi‑material, shockproof case with belt clip and lock FAQ How far does the blade extend before bending? The blade extends horizontally up to approximately 3.35 m before natural bending occurs, enabling longer unsupported measurements with the FatMax BladeArmor. What protection does the blade have against wear? The first 15 cm of the blade are overlaid with BladeArmor film and the entire blade is Mylar coated, which significantly reduces breakage and preserves scale legibility over time. Is the tape precise enough for site verification tasks? Yes. The tape is rated accuracy class II (EG II), suitable for most site and workshop verification tasks that require consistent, repeatable measurements. Can the hook be used for internal and external measurements? The large three‑rivet sliding hook is designed for both internal and external measurement, with controlled movement to maintain measurement accuracy. What features improve handling on busy sites? Ergonomic DynaGrip housing, a belt clip, lock mechanism and controlled rewind combine to improve grip, convenience and tool protection in demanding environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8000mm PowerLock Pocket Tape Measure 25mm Mylar-Coated Blade, Class II - STANLEY
Combining a chromed, impact‑resistant housing with a Mylar®-protected 25 mm blade and a controlled automatic recoil, this tape measure delivers durable, reliable results for everyday workshop and site measurement. Order the product directly via Metav Werkzeuge or contact our consultants for tailored advice. PowerLock® pocket tape measure by STANLEY — 8 m, 25 mm blade, Mylar® protection PowerLock® pocket tape measure for general workshop and site measuring tasks with automatic recoil and belt clip *Chromed impact‑resistant case *Mylar®-protected blade *Automatic recoil with stop button *Controlled recoil to protect end hook Built to last in demanding environments The robust chromed plastic housing and polished finish resist knocks and everyday wear, keeping the tool serviceable for longer. The blade is fully covered with a Mylar® protective layer, which reduces abrasion and preserves the printed graduations for consistent legibility. With an 8 m blade and a 25 mm width, the measuring element balances reach and stiffness: long enough for many site tasks while remaining rigid when extended, which speeds up work and reduces measurement errors. These design choices lower lifetime costs through fewer replacements and less downtime. Accurate readings and secure measurement control Graduated in mm/cm, the blade supports both fine and coarse measurements typical in workshop and trade applications. The tape conforms to accuracy class II, offering reliable reproducibility for general professional use. The end hook is riveted for strength — double riveted up to 3 m and triple riveted beyond 5 m — and it is adjustable for inside and outside measurements to maintain true readings. For safe operation, the tool features automatic recoil with a stop button and a controlled recoil mechanism active from 10 m, preventing sudden snap‑backs and protecting the end hook and tape printing. Designed for efficiency on the job Practical handling features increase productivity on site: a positive lock fixes the blade in place for hands‑free marking, the belt clip secures the tape to clothing or tool bags, and a compact pocket form factor keeps the instrument to hand without interference. The combination of a stiff 25 mm blade and the reinforced hook reduces flex when measuring across gaps, while the stop/release mechanism enables quick one‑handed operation — particularly useful when carrying materials or working at height. The overall package supports faster, safer measurement cycles and steady workflow in workshops and on construction sites. For reliable measuring tools with proven durability, contact Metav Werkzeuge to discuss the STANLEY PowerLock® pocket tape measure for your workshop or order through our specialists today. Technical data Article number: 4000787065NW Brand: STANLEY Product type: Pocket tape measure Model: PowerLock® Length: 8 m Graduation: mm/cm Blade width: 25 mm Housing: Chromed plastic Accuracy: EG II Packaging unit: 1 Facts Length: 8 m Blade width: 25 mm Graduation: mm/cm Special features Mylar®-protected blade Automatic recoil with stop button Controlled recoil at 10 m to protect end hook End hook double-riveted up to 3 m, triple-riveted beyond 5 m Movable end hook for internal and external measurement Belt clip and locking mechanism FAQ Is the blade suitable for precise workshop measurements? The tape’s mm/cm graduation and accuracy class II make it suitable for routine professional measurements in workshops and on site, providing consistent results for general tasks. How does the protective Mylar® layer help in daily use? The Mylar®-protected blade reduces wear on the printed graduations and improves resistance to scratches and solvents, prolonging legibility and service life. Can the end hook be used for both internal and external measurements? Yes, the adjustable end hook is designed for inside and outside measurements and is riveted for added strength to maintain accuracy during use. What safety features prevent the tape from snapping back? The tool includes automatic recoil with a stop button and a controlled recoil mechanism from 10 m, reducing snap-back risk and protecting both the end hook and the user. Is this tape measure suitable for tradespeople who carry tools on a belt? Yes, the integrated belt clip and compact housing make it convenient for tradespeople to carry and access the tape during tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8000mm PowerLock Tape Measure 25mm Mylar Coated Automatic Return, Class II - STANLEY
Take advantage of a robust, Mylar®-protected blade and an automatic rewind with stop button to speed up measuring tasks while protecting the end hook; order the item directly via Metav Werkzeuge or ask our consultants for assistance. PowerLock® Pocket Tape Measure 8 m × 25 mm by STANLEY — automatic rewind, Mylar® blade The PowerLock® Pocket Tape Measure is a compact metric tape, engineered for everyday trade and workshop measuring where durability and reliable readings are required. Chrome-finished, impact-resistant housing Mylar®-coated blade for extended durability Automatic rewind with stop button Movable end hook for inside/outside measurement Built for reliable, repeatable metric measurements The instrument combines a 25 mm wide blade with an 8 m nominal length and mm/cm graduations to support a wide range of general measuring tasks. The EG Class II accuracy assures compliance with common commercial tolerances, which means fewer re-measures and less scrap; this is particularly relevant where part tolerances are judged against statutory measurement classes. The chrome-finished plastic housing offers impact resistance while keeping overall weight low, and the fully Mylar®-coated blade reduces wear on the printed graduations so legibility is retained over prolonged use. Design choices that protect the blade and end hook A controlled rewind mechanism limits blade speed at approximately 10 m to prevent sudden recoil that can damage the hook or distort the tape, while the automatic rewind with stop button gives rapid retraction with an immediate lock when required. The end hook is riveted in a triple pattern beyond mid-span and double-riveted closer to the hook to maintain secure anchoring under tension; the hook itself is adjustable to allow both inside and outside measurements. These measures reduce maintenance needs and help the tape remain serviceable for longer in demanding environments. Practical benefits for workshop and site use Ergonomic features such as a belt clip, an easy-to-operate lock and the compact casing make this tape suitable for continual carry and fast access on jobsites. The Mylar® protective layer slows abrasion and resists moisture, improving lifespan compared with uncoated blades; in practice this reduces replacement frequency and supports a lower total cost of ownership. The combination of readable graduations, rugged casing and a controlled rewind helps maintain workflow efficiency and reduces small errors that add up across many measurements. Who gains the most from this tape Tradespeople, maintenance technicians and workshop operatives will find the combination of durability and dependable metric grading particularly beneficial, whether taking repeated site measures or checking components on the bench. The tape’s build concentrates on practical uptime — quick rewind, secure hook and a protective blade — which directly translates into time saved and fewer interruptions during measurement tasks. For questions about specific applications or compatibility with specialised measuring procedures, Metav’s consultants can advise on matching measuring tools to the task. Contact Metav Werkzeuge today for expert advice on integrating the STANLEY PowerLock® Pocket Tape Measure into the workshop and to request tailored procurement support from our Emmerich hub. Technical data Article number: 4000855130NW Product type: Pocket tape measure Label: PowerLock® Pocket Tape Measure L.8m B.25mm mm/cm EG II Ku.Automatic SB Manufacturer: STANLEY SKU: 4000855130NW Facts Length: 8,000 mm (8 m) Graduation: mm / cm Blade width: 25 mm Packaging unit: 1 Accuracy: EG Class II Special features Chrome-finished plastic housing, impact-resistant and polished Blade fully coated with Mylar® protective layer Automatic rewind with stop button Controlled recoil at 10 m to protect the end hook End hook triple-riveted beyond 5 m, double-riveted up to 3 m Movable end hook for inside and outside measurement Locking mechanism and belt clip Housing material: plastic FAQ Is the tape suitable for professional trade use? The STANLEY PowerLock® Pocket Tape Measure (SKU 4000855130NW) is designed for trade and workshop applications, offering EG Class II accuracy and a robust casing suited to frequent on-site use. What does EG Class II accuracy mean for everyday measuring? EG Class II indicates the tape meets European commercial tolerance classes; for the PowerLock® tape this ensures consistent millimetre-level readings suitable for most workshop and site measurements without the need for specialised laboratory-grade equipment. How does the Mylar® coating benefit longevity? The Mylar® layer protects printed graduations from abrasion and moisture, keeping the markings legible for longer and reducing the need for early replacement of the tape. Can this tape measure internal dimensions as well as external? Yes, the movable end hook on the PowerLock® tape enables reliable inside and outside measurements, with a secure riveted construction to preserve accuracy under load. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8000mm Tape Measure 25mm Yellow Steel Blade Automatic Rewind, Class II - TECWERK
Benefit from precise, dependable measurements and time-saving handling thanks to the 8 m measuring range and the automatic rewind with lock. Order the pocket tape measure directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK Pocket Tape Measure — 8 m, 25 mm blade, EC Class II The TECWERK pocket tape measure is a compact measuring tool designed for routine workshop and site tasks, offering an 8 m range with millimetre/centimetre graduation for precise linear measurement across construction, fabrication and maintenance applications. 8 m measuring range for medium tasks 25 mm wide yellow-painted steel blade Automatic rewind with locking mechanism Chrome-plated housing with belt clip Reliable accuracy for everyday workshop measuring Built to meet EC Class II standards, this pocket tape delivers measurements that are suitable for most professional and trade applications where consistent repeatability is required. The mm/cm graduation provides clear, metric readouts for rapid marking and checks; the compliance with Class II gives a verifiable tolerance band that supports quality control in production and on-site verification. The compact format supports routine inspection tasks without sacrificing measurable precision. Robust construction that reduces downtime The combination of a yellow-painted steel blade and an automatic rewind with locking mechanism reduces wear and speeds up repetitive measuring cycles. The blade’s finish improves contrast for faster reading, while the locking function secures the tape during transfer and marking, preventing retraction accidents and saving time. The chrome-plated plastic housing adds impact resistance and keeps weight low, and the integrated belt clip ensures the tool is readily to hand when moving between workstations. Practical design for a range of trades and tasks With a 25 mm blade, the tape achieves a balance between stiffness and portability: the blade resists bending for straighter pulls on longer spans while remaining compact enough for pockets and tool belts. Millimetre resolution combined with a reliable rewind mechanism makes the tool suitable for carpentry, metalworking and general maintenance tasks where medium-range linear measurement is common. The visible yellow blade and clear graduation assist fast, error‑reduced readings in varied lighting. Low-maintenance usability and standards compliance The tape requires minimal care: keep the blade clean and retract smoothly by using the locking feature to control retraction speed, avoiding abrupt snaps that shorten service life. The plastic housing simplifies handling and can be wiped down after use. Compliance with EC Class II supports traceable measurement practice in small-scale quality workflows and simplifies selection for workshops that require documented measuring accuracy without specialist calibration equipment. For robust, accurate measuring choose the TECWERK pocket tape measure with its 8 m range and EC Class II accuracy — contact Metav Werkzeuge for expert advice from Emmerich or to arrange procurement: info@metav-werkzeuge.com · +49 2822 7131930. Technical Data Article number: 2000855042NW Product: Pocket tape measure L 8 m B 25 mm mm/cm EC II TECWERK Manufacturer: TECWERK Facts Length: 8,000 mm (8 m) Blade width: 25 mm Graduation: mm/cm Accuracy class: EC II Packaging unit: 1 Special features Yellow-painted steel blade Automatic rewind with locking mechanism Chrome-plated plastic housing with belt clip Housing material: plastic FAQ How accurate is this tape measure for workshop tasks? The tape meets EC Class II accuracy, which makes the TECWERK pocket tape measure suitable for routine workshop measurements where consistent, documented tolerances are required. What length and blade width does it offer? The tool provides an 8 m measuring range with a 25 mm blade, combining medium-range coverage with a stiff enough blade for straighter pulls. Is the blade finish durable and easy to read? Yes — the yellow-painted steel blade enhances contrast for rapid reading and offers surface protection that supports longer service life. Does the housing include a carrying option for tradespeople? The chrome‑plated plastic housing includes an integrated belt clip, allowing easy attachment to a belt or pocket for quick access on site. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
8000mm Tape Measure Tylonâ„¢ 25mm Width Metric/cm, Belt Clip - STANLEY
Take advantage of a compact, Tylon™-coated tape that combines an 8 m range with a 25 mm blade for steady stand‑out and accurate readings; order the STANLEY Tylon™ tape measure via Metav Werkzeuge or consult our team for supply and technical clarification. STANLEY Tylon™ 8 m Pocket Tape Measure — 25 mm blade, mm/cm graduations The STANLEY Tylon™ pocket tape measure is designed for workshop and site use, offering metric readability and a durable, wear‑resistant blade for repeated professional measurements Tylon™ coated blade for extended wear 8 m measuring range with mm/cm graduations 25 mm wide blade for stability in spans Robust belt clip and class II accuracy Reliable metric readings for workshop precision The Tylon™ pocket tape is engineered for clear, repeatable measuring: the mm/cm graduations provide fine, metric increments while the tape’s class II designation (EG II) ensures compliance with common accuracy requirements for construction and mechanical tasks. The calibrated scale allows for straightforward transfer of measurements from components to drawings, reducing rework and measurement uncertainty. Measurement data are presented in a way that supports decision‑making on the shop floor and in inspection routines, making the tool a dependable basic instrument in professional environments. Durable blade and stable stand‑out minimise downtime A Tylon™ coating on the blade enhances wear resistance, protecting printed graduations against abrasion and solvents typical in workshop environments. The 25 mm width increases rigidity for better stand‑out when measuring longer spans, reducing the need for a second person and speeding up repetitive tasks. The robust retraction mechanism and corrosion‑resistant finish are intended to prolong service life, lowering replacement frequency and overall operating costs for maintenance departments and small businesses. Pocket format and simple handling for efficient workflows Compact housing and an integrated belt clip provide secure, immediate access during layout, assembly and site work, supporting faster throughput in routine measuring tasks. The lightweight form factor combined with a generous 8 m reach makes the tape versatile for both small workshops and on‑site jobs where portability matters. Clear graduations and a smooth retraction motion reduce handling errors, promoting a consistent measuring rhythm across teams and shifts while keeping toolbox space optimised. For reliable, workshop‑grade measuring tools, rely on Metav Werkzeuge — secure the STANLEY Tylon™ 8 m pocket tape measure through Metav Werkzeuge for fast supply from Emmerich and expert advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4000787023NW Product type: Pocket tape measure Brand: STANLEY Packaging: SB Unit: 1 Facts Length: 8 m Blade width: 25 mm Graduations: mm/cm Packaging unit: 1 Special features Coating: Tylon™ Belt clip included Accuracy: EG II (class II) Retail packaging: SB FAQ What is the measuring range of the STANLEY Tylon™ tape? The STANLEY Tylon™ 8 m pocket tape measure offers an 8 m measuring range with mm/cm graduations for metric applications. How durable is the blade finish on this tape measure? The Tylon™ coating on the blade increases wear resistance and protects printed graduations, extending the useful life of the tape in workshop conditions. Does the tape provide a stable stand‑out for one‑person measuring? With a 25 mm wide blade, the tape offers improved rigidity and better stand‑out for measuring longer spans alone. Is the accuracy suitable for construction and general engineering tasks? Yes, the tape is marked EG II, corresponding to class II accuracy commonly accepted for site measurement and general mechanical work. What is the article number for ordering or referencing this tape? The article number is 4000787023NW for the STANLEY Tylon™ 8 m pocket tape measure. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Accurate checks with precision straightedges
Precision straightedges are high-accuracy measuring tools designed to verify flatness and straightness across surfaces. Available in several lengths and finished from durable metals, these instruments provide a simple, repeatable method for alignment and inspection in industrial settings.
How precision straightedges work and where they are used
A precision straightedge is laid against a surface to reveal deviations from true flatness or a straight line, with fine graduations enabling careful assessment of run-out and planar error. Typical applications include mechanical engineering, electronics, optics and microscopy, machine tool build and quality control, where reliable visual or feeler-gauge inspection prevents assembly issues and functional failure.
Key advantages that cut waste and speed up production
- high accuracy and stable construction reduce measurement uncertainty and help maintain production tolerances.
- stainless steel or other precision metals ensure long service life and corrosion resistance.
- fine graduations and etched scales allow precise readings and repeatable checks.
- various lengths suit bench work as well as larger components, shortening setup time.
- simple handling lowers inspection time and contributes to fewer rejects and rework.
Why Metav is the practical choice for precision straightedges
Metav combines decade-long expertise with a broad range of measurement tools, making it a pragmatic partner for workshop and production buyers. With over 48,000 customers and a catalogue exceeding 250,000 products, Metav operates from Emmerich as a quality filter for the european market, offering consistent availability and straightforward order processing. For those seeking a reliable source of precision straightedges and complementary measuring instruments, Metav’s range and technical information help select the correct specification for the intended inspection task.
In brief
Precision straightedges deliver fast, reliable assessments of flatness and straightness across industries, improving quality control and reducing scrap while being simple to use and maintain.
FAQ
What materials are precision straightedges typically made from?
Precision straightedges are commonly manufactured from stainless steel or other precision metals to ensure stability, wear resistance and longevity in industrial use.
In which industries are precision straightedges most valuable?
Precision straightedges are widely used in mechanical engineering, electronics, optics and microscopy, machine tool construction and general quality control where geometric accuracy is critical.
How is a precision straightedge used to check flatness?
Place the precision straightedge on the surface and inspect gaps visually or with feeler gauges; fine graduations and a straight reference edge make deviations from flatness evident for correction or further machining.
Are different lengths available for precision straightedges?
Yes, precision straightedges are offered in various lengths to match bench-top inspections as well as larger component checks, allowing selection of the most efficient tool for each application.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com