Precision specialist calipers for inaccessible measurements
Specialist calipers are engineered to measure fine grooves, deep bores and complex contours with reproducible accuracy down to the micrometre, delivering reliable results where standard calipers reach their limits. Designed with customised jaw shapes and robust materials such as carbide or ceramic tips, these calipers excel in measuring thin-walled aerospace structures, medical implants and intricate toolroom cavities while resisting coolants and abrasion. Available as digital, analogue and inductive variants, they offer options from quick-read displays and data transfer to extreme accuracy of ±0.001 mm for laboratory use. By combining tailored jaw geometries with durable construction, these precision tools improve inline quality control and support both prototype and series production.
310mm Digital Caliper For Bore Centre Measurement, USB, IP54, ISO 17025 Calibrated - Microtech Metrology
Take advantage of precise workshop measurement with ISO 17025 traceability and a reliable USB data interface; the combination of robust protection and a 10–310 mm measuring range ensures reproducible results for medium-sized assemblies. Order the instrument directly via Metav Werkzeuge or ask the consultants for application advice. Digital Caliper 10–310 mm by Microtech Metrology — USB output, ISO 17025 calibrated Digital Caliper 10–310 mm is a medium-range precision instrument for internal, external and depth measurements in toolrooms and production control. ISO 17025 calibration certificate included Measurement range 10–310 mm USB data output for direct recording IP54 splash and dust protection Accurate measuring for production control and quality checks The caliper provides a measuring range of 10–310 mm with a display resolution of 0.01 mm and an indicated accuracy of ±0.03 mm, which supports consistent quality control across batches. The USB data output enables direct transfer of measurement values to data-collection systems, reducing manual transcription errors and saving time during inspection rounds. The ISO 17025 calibration and accompanying certificate make traceability immediately available for audit trails, which is especially relevant when measurements feed into quality documentation. Robust design that suits the workshop environment With an IP54 rating, the instrument tolerates workshop conditions where splash and non-corrosive dust are present, so routine use at machine benches is practical without compromising reliability. The clear digital readout (display height 11 mm) keeps values legible at a glance, supporting faster decision-making on the shop floor. The included measuring cones (Ø20 mm and Ø35 mm) extend the instrument’s versatility for bore or stepped measurements, reducing the need for multiple dedicated gauges. Practical benefits for machinists and inspection teams Classified in the medium range for calipers, this tool bridges handiness and reach: long enough for larger components yet stiff enough for single-person handling. The USB interface and compact digital electronics integrate smoothly with data-collection workflows, enabling immediate logging of results and simpler SPC uptake. The delivered calibration certificate removes setup ambiguity and means the instrument is ready for use in regulated environments. Why this caliper matters for procurement and maintenance Choosing a calibrated, data-capable caliper minimises process interruptions and supports traceable measurement practices in manufacturing and maintenance. The unit’s combination of repeatable accuracy and digital output reduces downstream rework caused by measurement uncertainty. For operations aiming to improve documentation and throughput, the instrument represents a practical step towards digitised measurement and consistent production quality. For ISO-traceable measurements and advice on integration, contact Metav Werkzeuge in Emmerich — Metav’s experts will advise on the right measuring equipment and order options via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 141730301 GTIN: 4061905452468 Manufacturer: Microtech Metrology Core specifications Measuring range: 10–310 mm Resolution: 0.01 mm Indicated accuracy: ±0.03 mm Display height: 11 mm Protection class: IP54 Data output: USB Calibration: ISO 17025 certificate included Features & accessories Digital display Included measuring cones Ø20 mm and Ø35 mm Medium-range caliper (Mittel, 300–500 mm class) suitable for larger assemblies Ready for workshop and inspection use FAQ What is the measurement range and resolution of this caliper? The digital caliper from Microtech Metrology covers 10–310 mm with a resolution of 0.01 mm, making it suitable for standard shop and toolroom measurements. Is the instrument delivered calibrated and with paperwork? Yes, the device is supplied with an ISO 17025 calibration certificate; the documentation accompanies the caliper for audit-ready traceability. How are measurement values exported from the instrument? Values are transmitted via USB output, allowing the caliper to feed data directly into recording software or inspection spreadsheets for efficient documentation. Can the caliper be used in a busy workshop environment? The instrument’s IP54 rating and robust electronics make it resistant to splashes and dust, so it is suitable for routine use at machine benches and inspection stations. Which accessories are included for specialised measurements? The caliper includes measuring cones Ø20 mm and Ø35 mm, extending its capability for bore and stepped measurements without additional gauges. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
310mm Digital Precision Caliper Colour Touchscreen, Wireless USB, ISO 17025 Calibrated, IP54 - Microtech Metrology
Take advantage of precision calibration, secure data transfer and an intuitive touchscreen for reliable medium-range measurements in production and quality control. The instrument is supplied fully calibrated to ISO 17025 with a calibration certificate and offers Wireless and USB data output for seamless integration. Order the unit directly via Metav Werkzeuge or ask Metav's consultants for application advice. Precision caliper — Microtech Metrology digital caliper with 1.5" colour touchscreen and Wireless+USB Precision caliper is a digital measuring instrument designed for accurate linear and bore measurements in workshop, toolroom and production environments, particularly suited to medium-range component work. ISO 17025 calibration certificate included Wireless and USB data output 1.5" colour touchscreen display IP54 splash and dust protection Traceable accuracy for quality assurance The caliper is delivered fully calibrated to ISO 17025, which guarantees traceability and a documented measurement baseline suitable for internal quality systems and audits. The device reads in 0.005 mm steps, so measurement tasks that demand sub‑standard digital resolution are supported with improved repeatability compared with conventional 0.01 mm displays. This level of precision shortens inspection cycles and reduces rework by providing reliable numeric evidence for acceptance decisions. Effortless data transfer and simple on‑instrument control Integrated Wireless and USB outputs remove the need for manual transcription and make process data collection straightforward. The 1.5" colour touchscreen provides an immediate visual confirmation of readings and basic menus for unit selection and zeroing, enabling faster handovers between measurement and data capture. These features support digital workflows and facilitate documentation in production or metrology software without compromising cycle time. Built for medium‑range workshop and fixture applications With a measuring span of 10–310 mm, this caliper falls into the medium category for toolroom instruments, offering a balance of reach and stiffness that suits fixtures, mould components and medium‑sized assemblies. The instrument is rated IP54 for splash and dust resistance and operates at a measurement force 1–20 N, so it withstands typical workshop conditions while maintaining contact stability. Robust construction and clear readout reduce operator influence on results and contribute to consistently reproducible measurements. Practical benefits for procurement and shopfloor integration Choosing this instrument brings measurable advantages: certified calibration reduces administrative overhead for inspection plans, digital outputs simplify traceability, and a compact touchscreen interface accelerates routine controls. Metav's role as a precision partner ensures local stock and a quality filter from Emmerich, supporting reliable supply and fast response for industrial buyers and specialist distributors. For calibrated precision with integrated data transfer, contact Metav Werkzeuge to discuss the Microtech Metrology precision caliper and arrange procurement or application support. Technical data SKU: 141730307 GTIN: 4061905037054 Brand: Microtech Metrology ECLASS: 21170344 Core specifications Measuring range: 10–310 mm Resolution: 0.005 mm Measurement force: 1–20 N Protection class: IP54 Display: 1.5" colour touchscreen Special features Data output: Wireless + USB Digital instrument (electronic readout) Supplied calibrated to ISO 17025 with certificate Suitable for workshop and production use FAQ Is the instrument delivered calibrated and traceable? Yes. The precision caliper from Microtech Metrology is supplied fully calibrated to ISO 17025 and includes a calibration certificate for traceability and audit purposes. What measurement range and resolution does this caliper provide? The device measures from 10 to 310 mm with a display resolution of 0.005 mm, making it appropriate for medium‑range workshop and toolroom tasks. How can measurement data be exported from the caliper? Readings are available via Wireless transmission and a USB connection, enabling direct transfer into inspection software or data logging systems. Is the caliper suitable for use in a production environment? Yes. The IP54 rating and robust digital design of this digital caliper make it suitable for routine production and quality control environments where splash and dust resistance are needed. Can this instrument replace dial or analogue calipers for documentation workflows? The combination of a high‑resolution display and electronic outputs allows the instrument to integrate into digital documentation processes, reducing manual transcription and improving data reliability. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
310mm Digital Precision Caliper for Bore Distance Measurement Swiss Digital Display, IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of reliable ISO 17025 calibration, robust IP67 protection and wireless data output to speed up inspection workflows and reduce traceability effort; order the instrument via Metav Werkzeuge or consult our specialists for technical matching. Precision Caliper — Microtech Metrology (Digital, Wireless, IP67) A Precision Caliper designed for workshop and metrology tasks, offering a clear Swiss digital readout, wireless data transfer and rugged IP67 protection for demanding environments Swiss digital display, 11 mm height Wireless data output for seamless logging IP67 protection for dust and water resistance ISO 17025 calibrated with certificate High confidence through laboratory-grade calibration and repeatable readings This instrument arrives fully ISO 17025 certified and calibrated, supplying a traceable calibration certificate that documents measurement quality. The digital readout with a resolution of 0.01 mm supports consistent recording of dimensional data, which shortens inspection cycles and reduces rework. By combining laboratory-grade calibration with a clearly legible Swiss digital display, the caliper aids reliable decision-making on the shop floor and in quality-control stations alike. Built for tough environments and reliable data capture With an IP67 rating, the caliper withstands dust ingress and temporary immersion, making it suitable for production areas where contamination or coolant exposure is a risk. The wireless data output eliminates manual transcription and accelerates data collection into inspection software or measurement logs, reducing clerical errors and boosting throughput. Handcrafted measuring jaws ensure stable contact geometry, while the 10–310 mm measuring range classifies this tool as a medium-range caliper, ideal for components and assemblies that require more reach without sacrificing stiffness. Ergonomic handling, low maintenance and consistent results Self-lubricating slides and refined jaw geometry lower maintenance intervals and support consistent closure force for repeatable measurements. The instrument's combination of tactile quality and digital convenience enhances daily productivity in machine shops, fixture production and incoming goods inspection. The robust construction and precision finish deliver dependable long-term repeatability, so inspection routines remain fast and documented, supporting continuous process control. Contact Metav Werkzeuge for a technical consultation on integrating the Microtech Metrology Precision Caliper with existing inspection systems — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: 141730304 GTIN: 4061905037023 Manufacturer: Microtech Metrology Facts Measuring range: 10–310 mm Resolution: 0.01 mm Display: Swiss digital, 11 mm height Protection class: IP67 Special features Wireless data output ISO 17025 calibration with certificate Handcrafted measuring jaws Self-lubricating slide Digital display (Swiss) FAQ Is the caliper delivered with a calibration certificate? Yes. The Precision Caliper from Microtech Metrology (SKU 141730304) is supplied fully calibrated to ISO 17025 and includes the corresponding calibration certificate. Can the wireless output be connected to inspection software? The caliper supports wireless data transfer; the Microtech Metrology device can be integrated into data-logging workflows to reduce manual entry and improve traceability. What environments is the instrument suitable for? With IP67 protection, the instrument tolerates dusty conditions and temporary immersion, making it suitable for many production and workshop settings where contamination or coolant exposure occurs. Which measurement tasks suit the 10–310 mm range? The 10–310 mm range places this caliper in the medium-range category, suitable for larger assemblies, fixture components and parts that require more reach while maintaining stiffness and ease of handling. How are the measuring jaws made and why does it matter? The measuring jaws are handcrafted to ensure consistent contact geometry; this increases repeatability and improves reliability for recurring dimensional checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
310mm Digital Precision Caliper For Bore-to-Bore Measurements, Swiss Digital 11mm Display, IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of accurate, shop‑ready measurement with a calibrated, dust‑ and water‑resistant instrument that combines a 10–310 mm measuring range, 0.01 mm resolution and an ISO 17025 calibration certificate for immediate use in quality control. Order directly via Metav Werkzeuge or contact their consultants for technical guidance. Digital Precision Caliper 10–310 mm by Microtech Metrology (IP67, ISO 17025) A Digital Precision Caliper 10–310 mm designed for medium‑range workshop and inspection tasks, offering a robust IP67 housing and a factory calibration to ISO 17025 for traceable results. High‑resolution 0.01 mm display IP67 dust‑ and water‑resistant construction ISO 17025 calibrated with certificate Hand‑finished measuring jaws for repeatability Accurate reach for fixtures and medium assemblies The caliper covers a 10–310 mm measuring range, placing it in the medium measuring range class that balances reach with stiffness — ideal for vices, larger components and moulded parts where repeatable guidance is essential. With a display resolution of 0.01 mm, the instrument suits standard workshop quality control and component inspection; the fine digital step reduces reading uncertainty and supports efficient pass/fail decisions in production and incoming‑goods checks. Built to withstand the shopfloor A robust IP67 enclosure and self‑lubricating slide surfaces ensure reliable operation where coolant, dust or occasional splashes are present. The clear Swiss Digital readout, with 11 mm high digits, speeds up measurement cycles and minimises transcription errors, while hand‑finished jaws deliver consistent contact geometry for external and step measurements. These features reduce downtime and maintenance needs, improving throughput in daily metrology tasks. Traceable calibration for quality assurance Delivered fully calibrated to ISO 17025, the instrument includes a calibration certificate that documents traceability and measurement uncertainty. This certified status removes an initial verification step for internal quality systems and supports audits or supplier acceptance procedures. The included documentation helps integrate the caliper into formal inspection routines and reduces the administrative burden associated with new measuring equipment. Practical handling and workshop integration Ergonomic sizing and a medium‑length beam make the instrument easy to handle for single‑operator checks while retaining the stiffness required for reproducible readings. The combination of robust protection, precise readout and hand‑finished contact faces supports confident decision‑making across toolrooms, maintenance departments and quality labs. Metav’s distribution offers a practical supply channel and additional technical advice to align the tool with production workflows. Choose Microtech Metrology’s calibrated caliper for dependable medium‑range measurement and contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored ordering and technical consultation Technical data Article number: 141730303 GTIN: 4061905037016 Manufacturer: Microtech Metrology Digital display: Swiss Digital, digit height 11 mm Protection class: IP67 Calibration: ISO 17025 (certificate included) Facts Measuring range: 10–310 mm Display resolution: 0.01 mm Diameter of measuring cone: 10 mm Special features Hand‑finished measuring jaws Self‑lubricating slide Digital instrument suitable for workshop and inspection use Delivered calibrated with ISO 17025 certificate FAQ Is the caliper delivered ready for inspection use? Yes. The Digital Precision Caliper is supplied fully calibrated to ISO 17025 and includes the calibration certificate for immediate integration into inspection routines. What does IP67 protection mean for everyday use? IP67 indicates dust tightness and protection against temporary immersion; this caliper resists splash and coolant exposure common on the shopfloor without compromising the electronics. Can the instrument measure internal, external and step features? The instrument is equipped with hand‑finished jaws and appropriate probe geometry to perform external, internal and step measurements reliably for medium‑range components. What resolution and readability can be expected? The caliper provides a digital resolution of 0.01 mm and a Swiss Digital display with 11 mm high digits for clear, fast readings in busy environments. Which measuring tasks is the caliper best suited to? Designed for medium‑range tasks, the caliper is well matched to fixtures, moulded parts and assembly components where a combination of reach and stiffness is required; it supports routine quality control and workshop measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
33-300mm Digital Internal Groove Caliper With Preset, Stainless Hardened Body, Plastic Case - Metav IndustryLine
The combination of precise 0.01 mm readout, a 33–300 mm measuring span and robust stainless construction makes this instrument a dependable choice for workshop quality control; its RB 5 data output streamlines process documentation. Order the Digital internal-groove caliper M240.038.N directly via Metav Werkzeuge or ask our consultants if needed Digital internal-groove caliper M240.038.N — Metav IndustryLine, 33–300 mm, hardened stainless The Digital internal-groove caliper M240.038.N is a workshop-class digital caliper engineered for repeatable measurement of internal grooves and slots across a 33–300 mm span, combining easy readability with industrial robustness *Digital display with ON/OFF and zero/preset *33–300 mm range for standard workshop needs *Hardened stainless steel with metal housing *RB 5 data output for measurement integration Reliable measurement for everyday workshop tasks Classified in the Standard range, the instrument covers the most common workshop requirements with a 33–300 mm measuring span that balances reach and stiffness for routine machine‑shop inspections. The caliper provides a 0.01 mm display increment, the established resolution for digital workshop calipers and suitable for typical quality checks and production control. The relatively compact jaw length of 110 mm helps to access grooves while keeping the measuring faces stable, reducing user‑induced error and improving repeatability in serial tasks. Digital convenience and process integration The digital readout is equipped with ON/OFF and zero/preset functions to speed setup and reduce cycle times when comparing features or transferring reference points. The integrated RB 5 data output enables straightforward connection to inspection systems or data loggers, supporting traceable documentation and faster downstream analysis. Powered by a 3 V measuring system, the device is ready for immediate use and preserves readings during brief interruptions; the preset function further shortens the time-to-measure by eliminating manual recalculation or conversion. Durable construction for industrial environments Constructed from hardened stainless steel with a protective metal housing, the caliper resists corrosion and everyday workshop wear, ensuring long service life and consistent measurement geometry. The robust build also supports frequent handling and reduces the risk of deformation under regular use. Supplied to works standard, the instrument is aimed at machine shops, toolrooms and production lines where reliable, low-maintenance measuring tools contribute to predictable process control and less downtime. Contact Metav Werkzeuge today to specify the Metav IndustryLine M240.038.N for precise internal groove measurement and receive tailored advice from our specialists at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M240.038.N GTIN: 4054469159942 Label: Digital-Innen-Nuten-Messschieber, 33-300 mm, 3 V mit Preset, INOX, Werksnorm Manufacturer: Metav IndustryLine Facts Measuring range: 33–300 mm Resolution (reading): 0.01 mm Weight: 1.05 kg Jaw length: 110 mm Tariff number: 90173000 Special features Material: hardened stainless steel, metal housing Display: digital with ON/OFF and zero/preset button Data output: RB 5 Measuring system: 3 V Supplied to works standard FAQ What types of measurements can this caliper perform? The caliper performs internal groove and slot measurements as its primary function; the design is optimised for internal features and tight recesses. Is the readout suitable for quality-control documentation? Yes. The device offers a 0.01 mm resolution and an RB 5 data output to support measurement logging and integration into quality workflows. Which materials is the caliper intended for use with? The caliper measures geometry, not material properties, and is suitable for measuring components across typical workshop materials where internal grooves need verification. How does the preset function benefit measurement routines? The zero/preset function reduces setup time by allowing quick reference setting and repeat checks without manual recalculation, improving throughput during serial inspections. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4000mm Digitaler Messschieber, 0,01mm, IP 67, ISO 17025 Kalibrierung - Microtech Metrology
Kompakte Extra‑Lang Reichweite, kabellose Datenausgabe und ISO 17025-Kalibrierung sorgen für reproduzierbare Messungen und hohe Nachvollziehbarkeit; profitieren Sie von der Kombination aus robuster Bauweise, großer Messreichweite und sofort einsatzbereiter Kalibrierung über Metav Werkzeuge oder lassen Sie sich fachkundig beraten. Messschieber Digitaler Messschieber von Microtech Metrology (141073415) Der Messschieber liefert präzise Längenmessungen über große Strecken und eignet sich speziell für großformatige Komponenten in Werkstatt und Fertigung. Extra‑Lang: Messreichweite bis 4000 mm Digitale Anzeige: Swiss electric Digit Höhe 14 mm Kabellose Datenübertragung per Wireless IP 67 Schutz gegen Staub und zeitweiliges Untertauchen Lieferumfang mit Kalibrierzeugnis nach ISO 17025 Präzision und Rückverfolgbarkeit für großformatige Messaufgaben Das Instrument wurde für Anwendungen mit großer Reichweite konstruiert und adressiert damit den Bedarf an stabilen, reproduzierbaren Messwerten bei langen Messstrecken. Die Messreichweite von 4000 mm kombiniert mit einem groß dimensionierten Schenkelquerschnitt sorgt für erhöhte Steifigkeit und reduziert durchbiegungsbedingte Messfehler. Anwender profitieren von klaren Messergebnissen, die sich ohne aufwendige Nachbearbeitung in Prüfprotokolle übernehmen lassen. Messdatenverarbeitung und Laborbereitschaft Die integrierte Swiss electric Anzeige mit 14 mm Höhe ermöglicht eine schnelle Ablesung auch bei ungünstigen Lichtverhältnissen, während die Wireless-Schnittstelle die Datenaufnahme in Messprotokolle und Prüfsoftware vereinfacht. Die Lieferung erfolgt inklusive Kalibrierung nach ISO 17025 und beiliegendem Kalibrierzeugnis, sodass das Gerät sofort für abnahmefähige Prüfungen eingesetzt werden kann. Das reduziert Einrichtungszeiten und erhöht die Planungssicherheit in der Produktion. Robustheit und Praxistauglichkeit im Arbeitsalltag Mit dem Schutzgrad IP 67 ist das Gerät gegen Staub geschützt und verträgt zeitweiliges Untertauchen, wodurch die Lebensdauer in rauen Fertigungsumgebungen steigt. Die robuste Konstruktion und die überdimensionierten Messschenkel verbessern die Handhabung bei großen Werkstücken; dadurch sinkt der Zeitaufwand pro Messung und die Effizienz in der Fertigung steigt. Einsatzbereiche und Zielgruppe Das Gerät richtet sich an Anwender im Vorrichtungs‑ und Formenbau, in der Schwerzerspanung sowie an Messlabore, die großdimensionierte Bauteile prüfen. Durch die Kombination aus Extra‑Langem Messbereich, digitaler Anzeige und kalibrierter Auslieferung ist das Instrument besonders geeignet für Prüffelder, die Nachvollziehbarkeit und industrielle Messprotokolle verlangen. Jetzt die Präzisionskompetenz von Microtech Metrology nutzen: Für verlässliche Messungen mit großer Reichweite empfehlen wir die Bestellung über Metav Werkzeuge. Bei Fragen zur Einsatzfähigkeit oder zur Integration in Ihre Prüfprozesse steht der technische Vertrieb gerne zur Verfügung – per eMail: info@metav-werkzeuge.com oder Telefon: +49 2822 7131930, WhatsApp: +49 170 2837271. Produktmerkmale Artikelnummer: 141073415 Marke: Microtech Metrology ECLASS: 21170344 Messsystem: ABS Digitalanzeige: Swiss electric Digit Höhe 14 mm Messbereich: 0-4000 mm Querschnitt: 53x8 Daten Ablesung: 0,01 mm Genauigkeit: 0,13 mm Messbereich Min: 0 mm Messbereich Max: 4000 mm Schnabellänge: 300 mm Besonderheiten IP 67: Schutz gegen Staub und zeitweiliges Untertauchen Datenausgang: Wireless (kabellose Datenübertragung) Digitale Anzeige: gut ablesbare 14 mm Ziffern ISO 17025: Kalibrierung nach ISO 17025, Kalibrierzeugnis liegt bei Digital: für einfache Datenübernahme in Prüfprozesse FAQ Welche Messgenauigkeit erreicht das Gerät bei langen Messstrecken? Die Genauigkeit liegt bei ±0,13 mm, gemessen an den technischen Angaben des Microtech Metrology digitalen Messgeräts (Artikelnummer 141073415), wodurch es für viele Fertigungs‑ und Prüfaufgaben mit großem Messbereich einsetzbar ist. Ist die Kalibrierung für abnahmefähige Prüfungen ausreichend? Ja, der Messschieber von Microtech Metrology wird kalibriert nach ISO 17025 ausgeliefert; das beiliegende Kalibrierzeugnis bestätigt die Labornachweisführung und erleichtert die Integration in Prüfabläufe. Wie werden Messdaten aus dem Gerät übernommen? Der Datenausgang erfolgt Wireless, sodass Messwerte direkt in Prüfsoftware oder Datenerfassungssysteme übertragen werden können; die digitale Anzeige mit 14 mm Ziffern unterstützt zusätzlich die schnelle manuelle Erfassung. Für welche Anwendungen eignet sich das Instrument besonders? Das Gerät ist speziell für großformatige Bauteile konzipiert und empfiehlt sich für Vorrichtungsbau, Formenbau und Schwerzerspanung, wo lange Messstrecken und robuste Handhabung gefragt sind. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
4000mm Lang-Messschieber, digitale Swiss Electric Anzeige 11mm, IP 67, ISO 17025 kalibriert, ABS Messsystem - Microtech Metrology
Der Microtech Metrology Messschieber überzeugt durch seinen Extra‑Langen Messbereich von 4.000 mm und die werkstattgerechte Robustheit mit IP 67 Schutz sowie durch die ISO 17025 Kalibrierung mit Kalibrierzeugnis; diese Kombination liefert verlässliche Messergebnisse und erleichtert die Integration in Qualitätsprozesse. Bestellen Sie das Gerät direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei technischen Details an. Messschieber – Digitaler Messschieber von Microtech Metrology Der Messschieber ist ein digitaler, robust ausgelegter Präzisionsschieber für großformatige Messaufgaben mit hohem Anspruch an Lesbarkeit und Rückführbarkeit. Extra‑Langes Messspektrum bis 4.000 mm IP 67 Schutz für nasse und staubige Umgebungen ISO 17025 Kalibrierung mit Kalibrierzeugnis Swiss electric Digit Anzeige, Höhe 11 mm, gut ablesbar ABS Messsystem für sofortige Positionsinformation Große Reichweite und stabile Bauweise für schwere Teile Der Schieber richtet sich an Anwender, die wiederholbare Messungen an großformatigen Bauteilen benötigen. Der Messbereich 4.000 mm macht dieses Instrument zur passenden Wahl für Rohr‑ und Behälterbau, Schwerzerspanung oder Vorrichtungsbau, wo lange Messwege gefragt sind. Durch den Querschnitt von 53 × 8 mm und eine Schnabellänge von 300 mm bleibt die Tiefenführung stabil, was die Reproduzierbarkeit von Aussen‑ und Stufenmessungen verbessert. Diese Ausführung ist auf robuste Praxisbedingungen ausgelegt und erleichtert das Handling großer Komponenten. Messgenauigkeit, Ablesbarkeit und Kalibrierung erklärt Zur Messwertinterpretation sind Ablesung 0,01 mm und Genauigkeit 0,13 mm zentrale Kenngrößen: Die Ablesung beschreibt die Auflösung des Displays, die eine Differenzierung von Hundertsteln ermöglicht, die Genauigkeit gibt die zu erwartende Messabweichung an. Dank ISO 17025 Kalibrierung wird das Werkzeug mit einem Kalibrierzeugnis ausgeliefert, das Rückführbarkeit und Prüfnachweis für Qualitätsmanagementsysteme gewährleistet. Die digitale Anzeige vom Typ Swiss electric Digit mit 11 mm Höhe sorgt für ergonomische Ablesbarkeit auch bei anspruchsvoller Werkstattbeleuchtung. Geeignet für industrielle Anwendungen und klare Zielgruppen Dieses Messgerät ist konzipiert für Fertigungsbetriebe, Qualitätssicherung und Werkzeugbau, die große Maßstäbe verifizieren müssen. Anwender profitieren von der Kombination aus Reichweite, Schutzklasse und Kalibrierbarkeit, wodurch der Schieber in Prüfplänen und Fertigungsdokumentationen direkt einsetzbar ist. Für Laboranwendungen mit extremen Präzisionsanforderungen empfiehlt sich die Prüfung der geforderten Fehlergrenzen; für viele Werkstattaufgaben bietet dieses Gerät eine praktikable Lösung. Bedienkomfort, Messsystem und Schutzmerkmal Das ABS‑Messsystem liefert sofortige Positionsdaten ohne erneutes Referenzfahren, was Zeit spart und Bedienfehler reduziert. Die Digitalanzeige ist großformatig ausgeführt, sodass Messergebnisse schnell und sicher abgelesen werden. Mit IP 67 Schutz ist der Schieber gegen Eindringen von Staub und zeitweiliges Untertauchen geschützt, wodurch er sich in rauen Umgebungen bewährt. Die robuste Fertigung und die ISO‑Kalibrierung unterstützen die Integration in Prüfprozesse und sorgen für langfristige Einsatzfähigkeit. Empfehlung: Der Microtech Metrology Messschieber mit 4.000 mm Messbereich und ISO 17025 Kalibrierung bietet die zuverlässige Grundlage für großformatige Messaufgaben – bestellen Sie direkt bei Metav Werkzeuge oder kontaktieren Sie unsere Technische Beratung per E‑Mail info@metav-werkzeuge.com. Produktmerkmale Artikelnummer: 141073405 Marke: Microtech Metrology Bezeichnung: Messschieber GTIN: 4061905454516 Messsystem: ABS Daten Messbereich: 0–4.000 mm Messbereich maximal: 4.000 mm Ablesung: 0,01 mm Genauigkeit: 0,13 Schnabellänge: 300 mm Querschnitt: 53×8 mm Anzeigehöhe: 11 mm Besonderheiten IP 67: Schutz gegen Staub und zeitweiliges Untertauchen ISO 17025 Kalibrierung: Kalibrierzeugnis liegt bei Swiss electric Digit: Digitale Anzeige, 11 mm Höhe ABS: Absolutmesssystem, sofortige Positionsinformation Extra‑Lang: Messbereichskategorie für 2.000–5.000 mm, geeignet für großformatige Komponenten FAQ Wie genau ist der Messschieber in der Praxis? Der Messschieber von Microtech Metrology (SKU 141073405) verfügt über eine Ablesung von 0,01 mm und eine angegebene Genauigkeit von 0,13, wodurch er für viele industrielle Anwendungen mit mittlerer bis großer Messlänge verlässliche Ergebnisse liefert. Wird das Gerät kalibriert geliefert? Ja, der Microtech Metrology Messschieber wird nach ISO 17025 kalibriert ausgeliefert; das Kalibrierzeugnis liegt dem Lieferumfang bei und erlaubt die direkte Nutzung in rückführbaren Messabläufen. Für welche Einsätze ist der Schieber mit 4.000 mm geeignet? Mit seinem Extra‑Langen Messbereich eignet sich das Gerät besonders für Rohr‑ und Behälterbau, Schwerzerspanung und Vorrichtungsbau, also überall dort, wo lange Messstrecken reproduzierbar erfasst werden müssen. Wie wetterfest ist das Messgerät? Der Schieber ist mit IP 67 klassifiziert, das schützt vor Eindringen von Staub und erlaubt zeitweiliges Untertauchen, wodurch der Einsatz in nassen oder staubigen Produktionsbereichen möglich ist. Welche Vorteile bietet das ABS Messsystem? Das ABS‑Messsystem von Microtech Metrology liefert sofortige Positionsinformationen ohne Referenzfahrt, was den Bedienaufwand reduziert und die Messzyklen beschleunigt. Hersteller: Microtech, Nizhneyurkovska str., 45a; 04080 Kyiv; Ukraine; tool@microtech.tools
400mm Digital Messschieber mit langem Messschnabel, 0,01mm, IP 67 - Microtech Metrology
Bereits im Jahr 2014 wurde von Microtech Metrology der Messschieber mit Messkraftkontrolle eingeführt. Seit dem besteht die Marktführerschaft und stetige Innovation in dem Bereich. HIGHLIGHTS für 400mm Messschieber von Microtech Metrology mit langem Messschnabel Messbereich: bis 400mm Ablesung: 0,01mm Ausführung: digital Datenausgang: Ohne Groß gedacht, sauber gemessen0 bis 400mm Bis 400mm Messbereich bedeutet: Bauteile dürfen ruhig größer sein, der Messfluss bleibt einfach. Längere Strecken, breite Auflager, weit auseinanderliegende Kanten – alles lässt sich direkt und nachvollziehbar prüfen. Ideal für Vorrichtungen, Formrahmen und Prüflehren, bei denen es auf wiederholbare Abstände und klare Bezugspunkte ankommt. Das Ergebnis: weniger Handgriffe, weniger Unterbrechungen, mehr Orientierung entlang der Linie – von der ersten Anlegekante bis zur letzten Kontrolle. Unsere Definition der EInteilung der Messbereiche. Klassifizierung Messbereiche beim Messschieber. Expertenhinweis: Wie stelle ich planparallelen Kontakt sicher? Messschenkel müssen vollständig anliegen; kippt der Schieber, entsteht ein systematischer Kippfehler. Bei Innenmessungen zusätzlich prüfen, ob beide Kreuzschnäbel anliegen. Produktmerkmale zumdigitalen Messschieber von Microtech Metrology: Bestellnummer: 141072411 Messbereich: 0 bis 400mm Marke: Microtech Metrology Bezeichnung: Messschieber Ausführung: digital Schnabellänge: 100mm Ablesung: 0,01mm Anzeige: Swiss electric Digit Höhe 11mm Datenausgang: Ohne Messsystem: ABS Genauigkeit: 0,03mm IP-Schutz: IP 67 mit langem Messschnabel mit ISO 17025 Kalibrierzertifikat Querschnitt: 17x5mm Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Worauf beim Erwerb eines Messschiebers Wert gelegt werden sollte: Während der Genauigkeit und dem Messbereich Beachtung geschenkt werden muss, sind auch Funktionen wie Dateneingabe-Optionen und Kontrolle der Messkraft von maßgeblicher Relevanz. Der Einsatz eines Messschiebers mit kontrollierter Messkraft ist besonders in der Qualitätssicherung und in Laborumgebungen vorteilhaft. Ebenso sollte man überlegen, ob die Kalibrierung des Messschiebers erforderlich ist. Man kann die Kalibrierung bei Lieferung vornehmen und aus Gründen der Prozesskontinuität alle 12 Monate erneuern.
400mm Digitaler Messschieber, 0,01mm Auflösung, IP 67, Wireless, Swiss electric Display, ISO 17025 Kalibriert - Microtech Metrology
Die Kombination aus ISO 17025‑Kalibrierung, robustem Querschnitt und kabelloser Datenübertragung sorgt für verlässliche Messergebnisse und reibungslose Prozessintegration; bei Bedarf berät Metav Werkzeuge gern persönlich und liefert das Messwerkzeug direkt an Ihre Werkbank. Messschieber Digital von Microtech Metrology Der Messschieber Digital von Microtech Metrology bietet präzise Werkstatt‑ und Prüfmesstechnik für den Mittelbereich und eignet sich für vielseitige Messaufgaben im Maschinenbau und Formenbau. Microtech Metrology Messschieber Digital mit Wireless Datenübertragung Mittelbereich: 0–400 mm Reichweite, gute Steifigkeit Auflösung 0,01 mm, Messgenauigkeit 0,03 mm Swiss electric Anzeige, Ziffernhöhe 14 mm für klare Ablesung ISO 17025 Kalibrierung inklusive Prüfzeugnis Robuste Bauweise für reproduzierbare Messungen Dank des Querschnitts 17x5 und der langen Backen mit 100 mm Schnabellänge bleibt das Messgerät verwindungsarm und stabil in der Handhabung. Diese Konstruktion reduziert Messfehler bei Außen‑ und Stufenmessungen und ermöglicht reproduzierbare Ergebnisse auch bei wiederholten Prüfabläufen. Für Anwender im Vorrichtungs‑ und Formenbau bedeutet das: weniger Nacharbeit und bessere Maßtreue. Präzision, Ablesbarkeit und Messsicherheit Die Kombination aus Ablesung 0,01 mm und einer dokumentierten Genauigkeit 0,03 mm sorgt für eine belastbare Basis in der Qualitätskontrolle. Die Swiss electric Anzeige mit 14 mm Ziffernhöhe unterstützt schnelles Ablesen bei wechselnden Lichtbedingungen. So lassen sich sowohl Einzelmessungen als auch serielle Prüfungen effizient dokumentieren, ohne aufwendige Nachmessungen durchführen zu müssen. Moderne Schnittstellen und Schutz für den Werkstatteinsatz Mit der Wireless Datenausgabe können Messwerte direkt an Datenerfassungssysteme übermittelt werden, was manuelle Fehler beim Übertragen reduziert und Messprozesse automatisiert. Der IP 67 Schutz erhöht die Einsatzsicherheit in staubiger oder feuchter Umgebung und macht das Messgerät tauglich für anspruchsvolle Fertigungsbedingungen. Kalibrierungsnachweis und Einsatzempfehlung für Prüfprozesse Das Messwerkzeug wird mit ISO 17025‑Kalibrierung ausgeliefert, inklusive Kalibrierzeugnis, wodurch Prüfprozesse nachvollziehbar und auditfähig bleiben. Dadurch eignet sich das Gerät sowohl für firmeninterne Prüfmittelüberwachungen als auch für Lieferantenprüfungen, bei denen ein offizieller Kalibrierschein verlangt wird. Empfehlung: Für präzise Messaufgaben in Produktion und Labor den Microtech Metrology Messschieber mit ISO 17025‑Kalibrierung und Wireless Datenübertragung wählen; bei technischen Fragen oder Bestellwunsch erreichen Sie Metav Werkzeuge per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 141072491 Marke: Microtech Metrology Bezeichnung: Messschieber GTIN: 4061905454608 Fakten Messbereich: 0–400 mm Ablesung: 0,01 mm Genauigkeit: 0,03 mm Schnabellänge: 100 mm Querschnitt: 17x5 Besonderheiten Datenausgang: Wireless Messsystem: ABS IP Schutz: IP 67 (Staubdicht, Schutz gegen zeitweiliges Untertauchen) Digital Anzeige: Swiss electric, Ziffernhöhe 14 mm ISO 17025 Kalibrierung: Kalibrierzeugnis inklusive FAQ Wie genau ist die Messung mit dem Messschieber von Microtech Metrology? Der Messschieber von Microtech Metrology erreicht eine Ablesung von 0,01 mm und eine angegebene Genauigkeit von 0,03 mm, womit er für viele Qualitätskontrollen im Maschinenbau und Formenbau geeignet ist. Wird der Messschieber kalibriert geliefert? Ja, der Microtech Metrology Messschieber wird mit ISO 17025‑Kalibrierung und zugehörigem Kalibrierzeugnis ausgeliefert, sodass die Prüfmittelverwaltung direkt dokumentierbare Nachweise erhält. Ist die Anzeige auch in schlecht beleuchteten Bereichen gut ablesbar? Die Swiss electric Anzeige mit 14 mm Ziffernhöhe sorgt für gute Lesbarkeit auch bei weniger optimaler Beleuchtung, was die Ablesesicherheit in Werkstattumgebungen erhöht. Kann man Messdaten direkt in ein Datenerfassungssystem übertragen? Der Messschieber verfügt über Wireless Datenübertragung, wodurch Messwerte einfach an Datenerfassungssysteme weitergeleitet werden können und manuelle Übertragungsfehler vermieden werden. Für welchen Messbereich ist dieses Gerät am besten geeignet? Mit einem Messbereich bis 400 mm gehört das Gerät in die Mittelklasse und eignet sich besonders für Werkstatt‑ und Fertigungsaufgaben, bei denen Reichweite und Handhabung gleichermaßen wichtig sind. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
450mm Electronic Scale With Ø41mm Magnifier, Carbon Body, mm/inch Display, Proximity Output, Battery CR2023, Supplied In Case - Metav IndustryLine
Combine lightweight carbon construction, high 0.01 mm resolution and convenient proximity data output for efficient, reproducible workshop measuring. Order the scale directly via Metav Werkzeuge or consult our specialists for application advice. M838.715 measuring scale — Electronic rule with magnifier, carbon body (0–450 mm), Metav IndustryLine The M838.715 measuring scale is an electronic workshop ruler with an integrated magnifier and proximity data output, designed for precise component measurement and straightforward digital transfer in production and inspection tasks. Electronic scale with integrated Ø41 mm magnifier Carbon construction for reduced weight and high stiffness Dual mm/inch display with Reset/Preset function Proximity data output for efficient data capture Precision where mid-range measurements matter The instrument belongs to the mid measurement class (300–500 mm), making it ideal for medium-sized components in fixture and mould construction. With a nominal measuring range of 0–450 mm, the design balances reach and rigidity: longer than compact rulers yet still manageable as a single-handed tool. The combination of 0.01 mm resolution and a stated accuracy of 0.03 mm allows reliable repeatability for workshop quality control, reducing rework and inspection time. This measurable performance supports faster decision-making on the shop floor and tighter process control. Clear readout and digital-ready workflow A clear digital display with mm/inch selection and Reset/Preset ease repetitive tasks and cross-team communication. The Proximity data output enables non-contact transfer to compatible data loggers or inspection software, streamlining documentation and traceability. Battery operation via 1× CR2023 keeps the instrument mobile; the compact power supply supports intermittent use without bulky cabling. These features make the device a practical bridge between manual measurement practice and digital record-keeping, improving throughput in small-batch and series production. Designed for practical workshop handling Constructed from carbon, the instrument combines low weight with sufficient stiffness for reproducible reading over its length; the overall length of 720 mm and a listed weight of 1 kg keep handling comfortable while preserving stability. The integrated Ø41 mm magnifier enhances readability of fine graduations and decimal values, reducing operator strain and speeding up routine checks. The robust interpretation of scales and tactile ergonomics minimise measurement variability, supporting consistent quality without complex training. Suitability and application benefits This measuring instrument is particularly suited to general machine and metalworking environments where medium-range precision is required: component mounting, sample checks, and inspection of intermediate assemblies. The mix of digital clarity, lightweight carbon construction and proximity output reduces cycle times and aids data capture for SPC or basic automation. For operations seeking to improve documentation and cut manual transcription errors, integration of this rule into existing workflows yields immediate efficiency gains and more reliable quality records. Contact Metav Werkzeuge for a tailored specification check and procurement advice for the carbon measuring scale with proximity output and magnifier Technical data Article number: M838.715 GTIN: 4061905450044 Manufacturer: Metav IndustryLine Material: Carbon Measuring range: 0–450 mm Total length: 720 mm Weight: 1 kg Resolution: 0.01 mm Accuracy: 0.03 mm Display: mm/inch with Reset/Preset Data output: Proximity Power supply: 1× CR2023 Magnifier diameter: Ø41 mm Digital: Yes SKU: M838.715 Core data Measuring range max: 450 mm Measuring range min: 0 mm Total length: 720 mm Weight: 1 kg Resolution: 0.01 mm Accuracy: 0.03 mm Magnifier: Ø41 mm Battery: CR2023 Special features Integrated magnifier for improved readability Dual mm/inch readout with Preset/Reset function Proximity output for non-contact data transfer Carbon construction for low weight and stiffness Suitable for mid-range workshop measurement tasks Digital instrument for straightforward documentation FAQ What is the effective measuring range of this instrument? The rule offers an effective measuring range of 0–450 mm, placing it in the mid-range class suitable for fixtures, housings and medium-sized components. Does the display support imperial units? Yes, the digital readout switches between mm/inch and includes Reset/Preset functions for repeatable workflows. How precise is the measuring result? The instrument provides a 0.01 mm resolution with a stated accuracy of 0.03 mm, suitable for standard workshop quality control. Can measurement data be transferred to a computer or logger? Data is output via a Proximity interface, allowing non-contact transfer to compatible data acquisition systems. What power source does the device use? The instrument is powered by a single CR2023 cell, keeping the unit compact and portable. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 mm Bore Distance Measuring Insert With Conical Measuring Faces For Digital Uni Caliper Series 240.201–240.205 - Metav IndustryLine
Take advantage of the combination of Ø 5 mm cone measuring faces and stainless-steel durability for fast, repeatable bore‑centre checks; order the accessory directly via Metav Werkzeuge or consult our specialists if required. M240.251 Hole‑distance measuring insert Ø 5 mm — cone measuring faces for Digital Uni calipers (series 240.201–240.205) | Metav IndustryLine M240.251 is a hole‑distance measuring insert with Ø 5 mm cone measuring faces, engineered for precise centre‑to‑centre measurement of bores when used with the Digital Uni caliper series 240.201–240.205. Ø5 mm cone tips for precise bore centres Stainless steel construction for corrosion resistance Compatible with Digital Uni calipers 240.201–240.205 Precise bore‑centre measurement for reliable inspection results The cone geometry with Ø 5 mm tips converts radial contact into a reproducible datum for centre‑to‑centre checks, reducing alignment errors that commonly occur with flat probes. Fitted to a digital caliper, the insert enables rapid verification of hole patterns and pitch, supporting consistent pass/fail decisions on the shop floor. The measured signal is as dependable as the mechanical contact; the shaped faces centre reliably in round bores and minimise lateral play, which improves traceability of measurements across batches. Robust stainless‑steel design that endures workshop conditions Constructed from stainless steel, the accessory resists corrosion and maintains form under regular handling, ensuring sustained accuracy over time. The compact 35 mm length and low mass (approx. 0.04 kg) make the insert easy to mount and manoeuvre without adding appreciable inertia to the caliper, preserving the instrument’s handling characteristics. Long service life and low maintenance reduce downtime and support continuous inspection routines in production or maintenance environments. Seamless integration to speed up measurement workflows Prepared for direct attachment to the Digital Uni calipers (series 240.201–240.205), the insert streamlines setup and reduces cycle times in repetitive checks. By converting a standard caliper into a specialised bore‑distance gauge, the accessory leverages existing tools and removes the need for dedicated jigs, which is a cost‑efficient approach for small to medium production runs. The result is improved throughput and a lower risk of rework thanks to quicker, more repeatable measurements. For precision bore‑centre inspections, choose the M240.251 from Metav Werkzeuge — contact our Emmerich team for tailored advice or compatibility checks via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M240.251 GTIN: 4061905053832 Brand: Metav IndustryLine Data Diameter: 5 mm Length: 35 mm Weight: 0.04 kg ECLASS: 21170324 Special features Cone measuring faces for bore‑centre measurement Compatible with Digital Uni calipers series 240.201–240.205 Material: stainless steel FAQ How does the insert measure hole distances accurately? The M240.251 uses Ø 5 mm cone measuring faces to centre inside a bore; when mounted on a Digital Uni caliper, it converts radial contact into a stable datum that yields repeatable centre‑to‑centre readings. Which calipers are compatible with this accessory? Compatibility is designed for the Digital Uni caliper series 240.201–240.205; the M240.251 mounts directly to those models to create a calibrated solution for bore‑pitch checks. Is the material suitable for regular workshop use? Yes, the insert is made from stainless steel, offering corrosion resistance and dimensional stability appropriate for frequent handling in production and inspection areas. Can the accessory reduce measuring time in serial inspections? By transforming a general‑purpose caliper into a specialised bore‑distance gauge, the M240.251 shortens setup and measurement cycles, improving throughput for repetitive quality checks. Does the insert affect caliper handling or weight significantly? With a length of 35 mm and a mass of approximately 0.04 kg, the accessory preserves the caliper’s handling characteristics while adding the necessary geometry for reliable bore measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50-300mm Digital Internal Caliper With Preset, Stainless Hardened Steel, RB5 Output, Supplied In Case - Metav IndustryLine
Take advantage of a hardened stainless-steel build and a 50–300 mm measuring range for reliable internal measurements across the workshop. The built-in digital preset and RB 5 data output combine precise readout and traceable data transfer for seamless quality control. Order directly via Metav Werkzeuge or consult the specialists for integration advice. Digital internal caliper M240.033.N — 50–300 mm, INOX hardened The Digital internal caliper M240.033.N is a hardened stainless-steel measuring instrument with digital preset and RB 5 interface, designed for precise internal and groove measurements in standard workshop and production use. Stainless, hardened construction for robust service Measuring range 50–300 mm for standard workshop use Digital preset with 0.01 mm resolution display RB 5 data output for integration and traceability Precision tailored to everyday workshop control This instrument delivers repeatable internal measurements thanks to a clear 0.01 mm display and a factory preset function that speeds up routine checks. Classified in the standard 50–300 mm range, it balances reach and rigidity to cover most machining and inspection tasks without unwieldy handling. The digital preset reduces operator steps: set a reference, perform the measure, and record the result. For quality procedures that demand digital traceability, the RB 5 output enables direct data capture into measuring software or data loggers, improving process documentation and reducing transcription errors. Built to withstand daily use while remaining easy to handle The slide and jaws are made from hardened stainless steel and the instrument features a robust metal housing for the display electronics, making it suitable for the shop floor environment. A jaw length of 86 mm and a total weight of about 0.94 kg provide a reassuring feel without compromising manoeuvrability during internal or groove measurements. The delivery in a protective transport case safeguards the caliper in transit and on busy benches. These construction choices extend tool life and keep calibration intervals predictable, supporting a stable inspection routine. Ready for digital workflows and fast measurement cycles Equipped with a 3 V power system and a compact control layout with on/off, set and incremental buttons, the caliper supports fast measurement cycles and simple operator training. The RB 5 interface is intended for direct connection to data collection systems, enabling immediate transfer of values for SPC or documentation purposes. Where traceability is required, the device integrates into traceable metrology chains without additional adapters, making the tool a practical component of modern production and inspection lines. The combination of a hardened feel, clear digital readout and data output helps reduce measurement uncertainty and speeds up decision-making on the shop floor. Contact Metav Werkzeuge for tailored technical advice and to arrange integration of the Metav IndustryLine digital internal caliper with RB 5 output into existing measurement systems. Technical data Article number: M240.033.N GTIN: 4054469159911 Manufacturer: Metav IndustryLine Facts Measuring range: 50–300 mm Display resolution: 0.01 mm Power supply: 3 V Weight: 0.94 kg Jaw length: 86 mm Tariff number: 90173000 Special features Hardened stainless-steel construction Metal housing for display electronics Digital preset function RB 5 data output for direct integration Delivered in transport case for secure handling Factory standard (Werksnorm) compliance FAQ What types of measurements is this caliper suited for? The caliper is optimised for internal measurements and groove checks; the Digital internal caliper M240.033.N covers internal, step and similar inside-dimension tasks within the 50–300 mm range. How accurate is the readout and what is the resolution? The instrument provides a display resolution of 0.01 mm and a stable digital readout suitable for standard workshop quality control procedures. Can the caliper export measurement data to a PC or logger? Yes, the caliper includes an RB 5 data output that permits direct transfer of measured values to compatible data capture systems for SPC and documentation. Is the instrument protected for workshop use? The hardened stainless-steel construction and metal display housing give robust protection, and the caliper is supplied in a transport case to reduce risk during handling. Does the device include a preset function and how does it help? The built-in digital preset allows a reference value to be set quickly, which speeds repetitive measurement tasks and reduces operator steps when checking multiple components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50-300mm Digital Internal Caliper With Probe, Preset Function, Stainless Hardened Body, Supplied In Case - Metav IndustryLine
Take advantage of a hardened stainless‑steel construction and a 50–300 mm measuring range with a clear digital readout and data output; the design ensures repeatable internal and groove measurements for routine quality control. Order the Digital Internal Caliper M240.042.N directly via Metav Werkzeuge or consult the team for application advice. Digital Internal Caliper M240.042.N — stainless, hardened, 50–300 mm range Digital Internal Caliper M240.042.N provides reliable internal and groove measurements for everyday workshop and machine‑shop tasks with a compact probe and preset function. Digital readout with preset and ON/OFF control Hardened stainless steel construction Data output via RB 5 interface Precision that matches workshop demands The Digital Internal Caliper is engineered for the standard workshop class, covering a 50–300 mm measuring range that balances reach and stiffness for consistent one‑hand operation. With a resolution of 0.01 mm on the display, the instrument supports routine quality checks and production sampling where clear numeric feedback speeds decision‑making. The hardened stainless steel profile and metal housing reduce wear and maintain alignment over repeated use, which improves traceability and lowers rework rates in a production environment. Purpose-built for internal and groove measurements A dedicated pin probe enables confident measurement of internal grooves and narrow bores where conventional jaw faces cannot reach. The unit’s preset function and ZERO setting simplify repetitive tasks by allowing quick datum resets, reducing operator time per measurement and improving process throughput. The clear ON/OFF and ZERO/PRESET controls are arranged for efficient operation on the shop floor, so cycle times are shortened while measurement consistency is increased. Durable integration and data capture for quality workflows Durability meets connectivity: the caliper’s metal housing and hardened construction resist workshop impacts, while the RB 5 data output enables capture of measured values for statistical process control or electronic documentation. Powered by a 3 V cell, the instrument is ready for extended inspection shifts without complex power management. At approximately 0.9 kg, the tool is robust yet manageable for routine handling and inspection tasks, smoothing the flow between measuring station and production line. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the M240.042.N into inspection routines — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M240.042.N GTIN: 4054469159966 Category: Messschieber Weight: 0.9 kg Facts Measuring range: 50–300 mm Resolution: 0.01 mm Power: 3 V Customs tariff: 90173000 Special features Hardened stainless steel, metal housing Pin probe for internal/groove measurement ON/OFF and ZERO/PRESET buttons Data output: RB 5 Works standard (Werksnorm) FAQ How does this caliper handle groove measurements? The M240.042.N includes a pin probe designed for internal and groove measurements; the instrument’s geometry and hardened stainless‑steel build provide stable contact and repeatable results. Can measured values be exported to a PC or data logger? Yes, the caliper offers a data output via the RB 5 interface for direct value transfer into documentation or SPC systems. What display resolution and typical accuracy can be expected? The instrument provides a display resolution of 0.01 mm, suitable for standard workshop inspections within the designated measuring range. Is the caliper suitable for continuous shop‑floor use? The metal housing, hardened stainless‑steel construction and simple ON/OFF control make the caliper robust enough for regular shop‑floor inspection cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50-500mm Digital Internal Caliper Preset Button Stainless Steel Metal Housing, With ON/OFF mm/inch - Metav IndustryLine
Take advantage of a wide 50–500 mm measuring range together with a clear 0.01 mm resolution and robust stainless-steel construction to keep internal dimension checks fast and reproducible; order the device directly via Metav Werkzeuge or consult the specialists for integration advice. Digital Inside Caliper M240.035 — 50–500 mm, stainless steel, preset function (Metav IndustryLine) The Digital Inside Caliper M240.035 is a precision instrument for internal measurements in workshop and production settings, designed for medium-range components and repeatable shop-floor inspection. 50–500 mm measuring range 0.01 mm resolution digital display Hardened stainless steel construction Preset / ZERO function and mm/inch selection Consistent precision that speeds up inspection This caliper combines a wide 50–500 mm measuring range with a clear 0.01 mm resolution, enabling quick decisions during routine quality checks. The medium-range design bridges bench and jigs, offering a balance between reach and stiffness that reduces measurement variability on assemblies and fixtures. Built for internal measurement tasks, the instrument shortens inspection cycles while maintaining repeatable results, which supports higher throughput and fewer rejected parts when implemented in standard shop workflows. Reliable digital read-out and data transfer for traceability A large digital display with ON/OFF, mm/inch, ABS/INC and ZERO/PRESET control ensures fast visual readings and the ability to set reference values instantly. The preset function enables predetermined offsets for gauging operations, reducing manual calculation errors. For process documentation, the caliper provides an RB 2 data output suitable for logging measurement sequences or connecting to data-collection devices, helping to integrate shop-floor checks into traceability chains without complex retrofitting. Durable build tailored to everyday workshop use Manufactured from hardened stainless steel with a protective metal housing, the instrument withstands the mechanical demands of production environments and resists corrosion from coolant exposure. The 105 mm jaw length supports deeper internal checks while remaining rigid enough for consistent readings. Classified as a medium-range caliper (measuring range up to 500 mm), it is well suited for mechanical engineering, maintenance and tooling departments that require robust, repeatable internal measurement capability without specialised laboratory equipment. Contact Metav Werkzeuge today for application guidance or to order the M240.035 directly from Metav Werkzeuge GmbH in Emmerich; expert advice and integration support are available by phone or e‑mail Technical data Article number: M240.035 GTIN: 4054469112619 Category: calipers Brand: Metav IndustryLine Facts Measuring range: 50–500 mm Resolution: 0.01 mm (0.0005 in) Jaw length: 105 mm Power: 3 V Data output: RB 2 Special features Material: hardened stainless steel, metal housing Display functions: ON/OFF, mm/inch, ABS/INC, ZERO/PRESET Digital instrument for internal measurements Suitable for medium-range inspection tasks FAQ What accuracy can be expected with this caliper? The caliper provides a resolution of 0.01 mm; combined with stable handling and the hardened construction, this yields repeatable shop-floor accuracy suitable for standard quality control tasks. Is the preset function useful for gauging setups? Yes—the preset/ZERO option allows the M240.035 to be set to a reference value quickly, simplifying comparative measurements and reducing setup time during repetitive gauging. Can measurement data be exported to a PC or data logger? The instrument includes an RB 2 data output which supports external data collection and process documentation when paired with compatible logging equipment. For which applications is the caliper best suited? Designed as a medium-range caliper, it is ideal for internal measurements on components such as housings, bores and fixtures commonly encountered in mechanical engineering and tooling. What maintenance is required to keep measurements stable? Routine cleaning of measuring faces and careful storage minimise wear; the hardened stainless steel surfaces and metal housing help preserve accuracy under normal workshop use. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500 mm Digital Caliper With 150 mm Jaws, Ø5 mm Holder, Preset Function, Delivered In Case - Metav IndustryLine
Take advantage of the combination of a 500 mm measuring range, 0.01 mm resolution and a robust 150 mm jaw to measure medium‑sized components reliably; order the Digital‑Uni‑MS directly via Metav Werkzeuge or ask our consultants if needed. Digital‑Uni‑MS 500 mm × 150 mm digital caliper – 5 mm mounting bore (Metav IndustryLine) The Digital‑Uni‑MS is a versatile digital caliper designed for medium‑range workshop and production measurements, combining an extended 500 mm measuring range with a compact jaw design and an integrated mounting bore for gauge inserts 500 mm measuring range for mid-size components 0.01 mm resolution digital readout 150 mm jaws with Ø 5 mm mounting bore RB 2 data output and preset functions Accurate mid‑range measurement for production use The instrument delivers a 500 mm measuring range with a standard 0.01 mm display step, making it suitable for many tasks in machine building and toolmaking where reach and stability must be balanced. Classified for medium‑range work, this caliper offers the reach to handle brackets, housings and fixtures while keeping handling and repeatability within practical workshop limits. The combination of extended range and fine resolution supports reliable decisions in incoming inspection and quality control. Fast, traceable digital readings to speed workflows A clear digital interface provides mm/inch switching and ABS/INC operation, while dedicated NULL/PRESET functions allow quick reference setting for comparative measurements. The unit includes RB 2 data output to transfer readings to recording systems or data loggers, reducing transcription errors and accelerating statistical process control. With a concise control layout and smooth slider action, the device reduces cycle time for routine checks and supports traceable measurement protocols. Practical mechanics and functional mounting options The caliper is fitted with 150 mm jaws and a Ø 5 mm mounting bore intended for gauge inserts, enabling flexible fixture or adapter use where repeatable positioning is needed. The construction is conceived for workshop durability while retaining the sensitivity required for precision work; the instrument weighs approximately 3.4 kg, giving it a reassuring feel and stability during longer measurements. Supplied to works standard, the tool is prepared for integration into daily inspection routines without unnecessary complexity. Where this caliper fits into the workflow This digital caliper suits quality inspectors, maintenance workshops and small series production where medium‑sized components are common. Its blend of reach, fine display resolution and data connectivity supports modern inspection routines and reduces manual data handling. Backed by the Metav IndustryLine portfolio, the device benefits from a dependable supply chain and practical documentation for implementation into existing measurement procedures. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine Digital‑Uni‑MS into measurement processes or to request ordering and logistics information Technical data SKU: M240.210.O GTIN: 4054469151984 Measuring range: 0–500 mm Resolution (display): 0.01 mm Weight: 3.4 kg Jaw length: 150 mm Data output: RB 2 Facts Measuring range max: 500 mm Measuring range min: 0 mm Reading step: 0.01 mm Tariff number: 90173000 Special features Digital display with ON/OFF, mm/inch, ABS/INC and NULL/PRESET buttons Mounting bore Ø 5 mm for gauge inserts Delivered to works standard (without preset inserts) FAQ What measuring range and resolution does the caliper offer? The Digital‑Uni‑MS provides a measuring range of 0–500 mm with a display resolution of 0.01 mm. Can the instrument switch between metric and imperial units? Yes, the caliper supports mm/inch switching via its digital display and includes ABS/INC functionality for flexible measurement modes. What is the RB 2 output used for? RB 2 is the data output interface on the Digital‑Uni‑MS for transferring measured values to data loggers or inspection software, enabling digital record keeping. What does "without inserts preset" mean for delivery? The label indicates the caliper is supplied to works standard and does not include preinstalled measuring inserts; adapter or insert fitting is available separately if required. Is the caliper suitable for workshop and production environments? Yes, the combination of a 500 mm range, robust jaw geometry and digital connectivity makes the instrument well suited to routine workshop inspections and small‑batch production control. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5000 mm Digitaler Messschieber, 0,01mm Auflösung, IP 67, ISO 17025 Kalibrierzeugnis, lange Backe 300mm - Microtech Metrology
Die Kombination aus Extra‑Langem Messbereich, robuster Schutzart IP67 und werksseitiger ISO‑17025‑Kalibrierung sorgt für verlässliche Messergebnisse auch bei großformatigen Bauteilen; bestellen Sie den kalibrierten Microtech Messschieber direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Messschieber – Digitaler Messschieber von Microtech Metrology Der Messschieber dient für präzise Längenmessungen über große Reichweiten und eignet sich besonders für anspruchsvolle Industrie‑ und Werkstattanwendungen. Extra‑Lang: Reichweite bis 5.000 mm Digitale Anzeige: Swiss Electric, Ziffernhöhe 11 mm Schutzart IP67 für staub‑ und wasserdichten Einsatz Werkseitig kalibriert nach ISO 17025, Kalibrierzeugnis inklusive Messlösungen für großformatige Komponenten und robuste Handhabung Für Messaufgaben in der Schwerzerspanung, im Rohr‑ und Behälterbau oder beim Formenbau ist die Extra‑Lang‑Ausführung ideal, da sie ein optimiertes Verhältnis aus Reichweite und Profilsteifigkeit bietet. Der lange Schenkel und die Schnabellänge 300 mm ermöglichen sichere Ansätze an tiefen oder schwer zugänglichen Messstellen und reduzieren das Nachmessen. Durch die stabile Bauform wird die Reproduzierbarkeit über längere Längen verbessert, sodass weniger Nacharbeit und eine höhere Fertigungsleistung erreicht werden. Präzision, Ablesbarkeit und digitale Komfortfunktionen Die Anzeige arbeitet mit einer Ablesung von 0,01 mm, was feine Abstufungen sichtbar macht, während das Swiss Electric Display mit 11 mm Ziffernhöhe die Ablesbarkeit am Arbeitsplatz erhöht. Das verwendete ABS‑Messsystem sorgt für zuverlässige Nullpunktreferenzen und einfache Umstellung zwischen Einheiten. Dadurch lassen sich Messdaten schneller erfassen und in dokumentationsfähige Ergebnisse überführen, was Prüfprozesse im Fertigungsalltag beschleunigt. Schutz, Kalibrierung und Messsicherheit für den Profi‑Einsatz Der Schieber ist mit IP67 ausgelegt und hält damit Staub und zeitweiliges Untertauchen stand, was den Einsatz unter rauen Bedingungen erlaubt. Das Werkzeug wird vollständig kalibriert ausgeliefert; ein Kalibrierzeugnis nach ISO 17025 liegt bei und dokumentiert die Messrichtigkeit. Diese Kombination aus Robustheit und nachgewiesener Kalibrierung reduziert Unsicherheiten bei Abnahmen und erleichtert die Integration in geregelte Qualitätsprozesse. Einsatzprofil, Zielgruppe und Bedienkomfort Das Produkt richtet sich an Messtechniker, Vorrichtungsbauer und Qualitätsverantwortliche, die lange Messstrecken zuverlässig abdecken müssen. Bedienfreundlichkeit zeigt sich in der klaren Anzeige, dem robusten Querschnitt von 53x8 und der Möglichkeit, Messungen auch an feuchten oder verschmutzten Bauteilen durchzuführen. Für den Einsatz an langen Bauteilen empfiehlt sich der Schieber als Werkzeug für wiederholbare Prüfabläufe, bei denen Zeitersparnis durch klare Ablesung und gesicherte Kalibrierung im Vordergrund steht. Empfehlung: Für präzise Langmessungen und dokumentierte Qualitätskontrolle empfiehlt Metav Werkzeuge den kalibrierten Microtech Messschieber mit IP67‑Schutz; Bestellfragen und technische Beratung: info@metav-werkzeuge.com, Tel. +49 2822 7131930 Produktmerkmale Artikelnummer: 141073505 Marke: Microtech Metrology Bezeichnung: Messschieber GTIN: 4061905454523 Messsystem: ABS Fakten Messbereich: 0‑5000 mm Ablesung: 0,01 mm Genauigkeit: 0,16 Schnabellänge: 300 mm Querschnitt: 53x8 Besonderheiten IP Schutz: IP 67 Digitale Anzeige: Swiss Electric Digit Höhe 11 mm Digital: Ja ISO 17025 Kalibrierung: Kalibrierzeugnis wird mitgeliefert FAQ Welche Längen kann der Schieber messen? Der Microtech Messschieber ist für Messungen von 0 bis 5.000 mm ausgelegt und deckt damit Anwendungen im Rohr‑, Behälter‑ und Formenbau ab. Wie fein ist die Auflösung der Anzeige? Die digitale Anzeige des Messschiebers bietet eine Ablesung von 0,01 mm, kombiniert mit einem gut lesbaren Swiss Electric Display. Ist der Messschieber sofort einsatzbereit für zertifizierte Prüfungen? Ja, der Microtech Messschieber wird werksseitig kalibriert und mit einem Kalibrierzeugnis nach ISO 17025 ausgeliefert, sodass er sich für geregelte Prüfabläufe eignet. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
500mm Caliper Measuring Jaw Adapter For 5.5mm Jaw Thickness - Metav IndustryLine
Take advantage of a compact, purpose-built accessory that converts standard caliper jaws into a specialised measuring interface: the adapter accepts jaw thicknesses up to 5.5 mm, fits calipers with a measuring range up to 500 mm and mounts on a Ø5 mm fitting for secure attachment. Order the adapter directly via Metav Werkzeuge or consult our specialists for application advice. Caliper jaw adapter (for calipers up to 500 mm) — Metav IndustryLine, Ø5 mounting, 5.5 mm jaw capacity Caliper jaw adapter (for calipers up to 500 mm) is a compact attachment that converts standard caliper jaws into a dedicated measuring interface for medium-range workshop tasks, ideal where quick adaptation is required without changing instruments Fits calipers up to 500 mm Accepts jaw thickness up to 5.5 mm Ø5 mm mounting bore for secure fit Lightweight 50 g for minimal load Consistent precision for medium-range measuring tasks This accessory is engineered as a precision caliper adapter for calipers with a maximum measuring range of 500 mm, placing it in the workshop's medium‑range category. By allowing a defined contact geometry on existing jaws, the adapter reduces variability introduced by improvised fixtures and supports repeatable measurements across production batches. The compact construction and 50 g mass keep the additional load negligible, preserving the instrument's handling and helping to avoid bending or offset errors that can occur with heavier retrofits. Straightforward compatibility and quick fitting The adapter secures onto the caliper jaw via a Ø5 mm mounting interface, a common workshop standard that ensures a tight, concentric fit on compatible jaws. Acceptance of jaw thicknesses up to 5.5 mm means the part suits many standard and robust jaw designs found in industrial and bench calipers. Its role as an attachment for measuring jaws simplifies conversion of an existing analogue instrument into a specialised gauge without the need for new callipers, saving procurement time and reducing downtime in the measuring process. Practical benefits for everyday workshop use Designed as a pragmatic accessory rather than a complete instrument, the adapter enhances workflow by enabling tailored contact forms for specific measurement tasks — for example, reaching into tight grooves or creating a repeatable stop for stepped measurements. The solution supports the shop-floor emphasis on efficiency: one adapted caliper can replace multiple specialised tools, lowering equipment complexity. Traceability and repeatability are improved when the same adapter is used consistently across checks, which is particularly valuable for batch control and fixture set‑ups. Built for durability and predictable handling Although compact, the adapter is manufactured to withstand routine workshop use while maintaining alignment and seat integrity on the caliper jaw. Its low mass minimises influence on the caliper's dynamics during measurement, and the defined mounting geometry reduces play once fitted. As an accessory that complements existing metrology equipment, it contributes to a more organised measurement routine and helps technicians focus on result quality rather than frequent tool changes. Contact Metav Werkzeuge for tailored advice and to obtain the Metav IndustryLine caliper jaw adapter (SKU M240.312) from our Emmerich quality centre Technical data SKU: M240.312 GTIN: 4054469159515 ECLASS: 21131720 Tariff number: 90178090 Weight: 0.05 kg Facts Measuring range compatibility: up to 500 mm Maximum jaw thickness accepted: 5.5 mm Mounting bore: Ø5 mm Mass: 0.05 kg (50 g) Special features Attachment for caliper measuring jaws Suited to analogue calipers Designed for medium-range calipers (up to 500 mm) Compact, lightweight accessory Enables defined contact geometry for repeatable measures FAQ Which calipers are compatible with this adapter? The adapter is compatible with calipers that accept an accessory on a Ø5 mm mounting and have jaw thicknesses up to 5.5 mm; it is intended for calipers with a measuring range up to 500 mm and is supplied as the Metav IndustryLine caliper jaw adapter (SKU M240.312). Can the adapter be used on digital calipers as well as analogue ones? Yes; while the design is intended for analogue calipers, the Metav IndustryLine adapter can be fitted to many digital models provided the jaw geometry and a Ø5 mm mounting are available. Does the adapter affect measurement accuracy? When fitted correctly, the adapter provides a consistent contact geometry that improves repeatability; the low mass (approximately 50 g) minimises influence on the caliper's handling and thus limits additional measurement error. What workshop tasks benefit most from this accessory? The adapter is particularly useful for stepped measurements, internal features accessed via modified jaws and repeat checks where a defined, repeatable contact is required; it adapts standard calipers for medium-range metrology tasks without needing a dedicated gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Depth Caliper Wireless Digital Display Swiss Digit 11mm, IP67 - Microtech Metrology
Take advantage of robust wireless data transfer and an IP67-rated housing combined with a 0–500 mm measurement range and a clear Swiss Digit display for reliable depth measurements in production and workshop environments. Order the depth caliper directly via Metav Werkzeuge or ask our consultants if needed. Depth Caliper — Digital Depth Gauge, Wireless, IP67 Depth Caliper is a wireless digital depth gauge designed for medium-range workshop and production measurements up to 500 mm, offering clear Swiss Digit readout and durable IP67 protection. Wireless data output for digital logging IP67 protection against dust and immersion 0–500 mm medium-range capacity Swiss Digit display, 11 mm high Precision that keeps production moving The digital depth gauge delivers repeatable results with a resolution of 0.01 mm and a stated accuracy of ±0.04 mm, which makes it suitable for many machining and inspection tasks where depth tolerance is critical. Classified as a medium-range instrument (300–500 mm), the instrument balances reach and rigidity so that measurements across larger components remain reproducible. The measurement certainty supports rational production decisions by reducing rework and minimising scrap rates. Built to integrate with digital workflows Equipped with a wireless data output, the instrument simplifies capture of measurement results for statistical process control and documentation without the hassle of cables. The Swiss Digit display (11 mm height) ensures readings remain legible on busy shop floors, improving throughput by reducing read-and-record time. With an IP67 rating, the unit resists dust ingress and temporary immersion, therefore offering dependable operation in harsher shop conditions and lowering downtime caused by environmental contaminants. Practical handling and typical applications As a dedicated depth gauge, this digital caliper performs depth measurements on pockets, bores and steps where precise axial measurement is required. Its 0–500 mm span covers fixtures, housings and medium-sized components commonly found in toolmaking, jigs and fixture assembly. Compact operation and a straightforward digital interface permit efficient use at inspection benches and inline quality checks, making it a pragmatic choice for workshops seeking measurable productivity gains. Contact Metav Werkzeuge for tailored advice on integrating the Microtech Metrology digital depth caliper into production; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 1432030504 GTIN: 4061905459894 Manufacturer: Microtech Metrology Product type: Digital depth caliper Data output: Wireless Facts Measurement range: 0–500 mm Resolution: 0.01 mm Accuracy: ±0.04 mm Display height: 11 mm Protection class: IP67 Special features Wireless data output Swiss Digit display Digital measuring device Medium-range (300–500 mm) classification FAQ Is this depth gauge suitable for workshop use? The Microtech Metrology digital depth caliper (SKU 1432030504) is designed for workshop and production environments, offering a robust IP67 rating and a 0–500 mm range suited to medium-sized components. What measurement precision can be expected? The instrument provides a resolution of 0.01 mm with a stated accuracy of ±0.04 mm, allowing controlled depth measurements for many machining and inspection tasks. How are readings transferred to data systems? Measurement values are sent via the device's wireless data output, enabling integration into data logging and quality control systems without wired connections. Is the display easy to read under workshop lighting? Yes, the device uses a Swiss Digit display with an 11 mm character height, designed for good legibility in busy shop-floor conditions. For which kinds of depth measurements is this caliper intended? This digital depth caliper is optimised for measuring depths of pockets, bores and steps on medium-sized components up to 500 mm, suitable for toolmaking, fixture work and production checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
500mm Depth Caliper With Interchangeable Probes, Digital Readout Mm/Inch, ABS, ISO 17025 Calibration, Plastic Case - Filetta
Taking advantage of reliable digital readout, interchangeable probes and a robust transport case supports consistent depth measurement across workshop and fixture tasks. Order the Filetta depth caliper directly via Metav Werkzeuge or consult our specialists for application advice. Filetta Depth Caliper MS910.498 — Digital depth caliper with interchangeable probes, 0–500 mm range The Depth Caliper MS910.498 is a digital depth measuring instrument designed for medium‑range workshop applications such as fixtures, moulds and assembly checks. Digital mm/inch display with ABS/INC Interchangeable probes for diverse recesses 0–500 mm range for medium workshop tasks Supplied in transport case for safe handling Consistent medium-range depth measurement for workshop use The Filetta MS910.498 places medium-range capability at the centre of everyday metrology needs: the 0–500 mm range covers typical machine‑shop and toolroom tasks where reach and stiffness must be balanced. With a clear digital architecture and mechanical design tuned for repeatability, the caliper delivers reliable depth results on components, housings and cavities. The measured values are presented in a straightforward format that supports quality control protocols and reduces rework time. Adaptable probe set for awkward profiles and recesses Interchangeable probes expand the instrument’s practical scope: a hook, double hook, disc probe Ø30 mm and measuring pin Ø3 mm allow measurement of narrow slots, stepped depths, large bore depths and fine grooves respectively. This modular contact system saves time otherwise spent changing tools or adapting fixtures and ensures correct contact geometry for reproducible seating — especially useful when measuring components with mixed detail sizes. Clear digital reading and measurement reliability The electronic system provides mm/inch switching plus ABS/INC modes and Reset/Preset for process control. Key metrological data are 0.01 mm resolution and ±0.03 mm accuracy, which together define the instrument’s capability to resolve fine increments while maintaining industrial‑grade tolerance. The combination of high resolution and stable reading behaviour supports confident decision‑making during inspection and assembly operations. Workshop-ready handling and secure transport A locking screw secures the slider for stable readings and safe handling during transfer between workstations. Power is provided by a single V357 battery, minimising downtime with a common cell type. The depth caliper is supplied in a transport case, protecting the measuring faces and probes in transit and storage. These practical details contribute to dependable uptime and a lower risk of damage in daily workshop use. Contact Metav Werkzeuge to discuss the Filetta MS910.498 and arrange supply from our Emmerich stock — call +49 2822 7131930 or email info@metav-werkzeuge.com to request tailored measurement advice Technical data Article number: MS910.498 Manufacturer: Filetta Product type: Depth caliper Digital display: mm/inch, ABS/INC, Reset/Preset Battery: 1x V357 Facts Measuring range: 0–500 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Display increment: 0.01 mm Special features Interchangeable probes: hook; double hook; disc probe Ø30 mm; measuring pin Ø3 mm Locking screw for stable readings Supplied in transport case for safe handling Digital unit suitable for workshop and inspection use FAQ What measuring range does this caliper cover? The Filetta depth caliper MS910.498 covers a 0–500 mm measuring range, placing it in the medium‑range class for workshop and fixture measurements. Which probe types are included and what are they for? The instrument includes a hook, a double hook, a disc probe (Ø30 mm) and a measuring pin (Ø3 mm); these probes adapt the caliper to measure slots, stepped depths, broad recesses and fine grooves respectively. How precise is the digital readout? The caliper provides a 0.01 mm resolution with an overall stated accuracy of ±0.03 mm, suitable for standard machine‑shop quality control tasks. Is the caliper ready for transport and workshop use? Yes; the device is supplied in a transport case and features a locking screw to secure the slider during movement and storage. What power source does the caliper use? The display is powered by a single V357 battery, which is commonly available and easy to replace. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
500mm Depth Gauge Digital With Nail Probe, Swiss Digit Display 11mm, IP67 - Microtech Metrology
Take advantage of robust IP67 protection, a 0–500 mm measuring range and a high-contrast Swiss Digit display to speed up depth measurement tasks while reducing rework; order the depth caliper directly via Metav Werkzeuge or consult our specialists for application advice. Depth Caliper — Digital depth measuring instrument with Swiss Digit display and IP67 protection (Microtech Metrology) The Depth Caliper is a digital measuring instrument designed for medium-range depth measurements in workshop and production environments, offering clear readout and robust environmental protection. Robust IP67 protection for wet and dusty environments 0–500 mm measuring range for medium applications 0.01 mm resolution, 0.04 mm accuracy Swiss Digit display, 11 mm height for clear reading Faster, more reliable depth measurements for production The digital measuring instrument features a Swiss Digit display with an 11 mm character height, providing highly legible figures that reduce interpretation errors on the shop floor. With a resolution of 0.01 mm and a stated accuracy of ±0.04 mm, the instrument supports routine quality checks and reduces the need for repeat measurements. Clear digital output speeds up inspection steps and contributes directly to improved throughput and lower scrap rates. Built for medium-range workshop and toolroom tasks Classified as a medium-range caliper (measuring capacity up to 500 mm), this device balances reach and rigidity for components such as fixtures, housings and larger assemblies. Its design suits machine shops, jigs and mould construction where extended reach meets the need for manageable handling. The combination of reach and stability helps keep measurements reproducible across multiple operators and setups. Protected operation and dependable performance in harsh conditions The unit’s IP67 ingress protection rating ensures dust-tight sealing and immersion resistance, which allows reliable use in harsher workshop environments. The sealed electronics and robust construction limit downtime due to contamination and maintain measurement integrity over longer service intervals. This durability delivers practical savings in maintenance and replacement costs, supporting continuous production. Clear technical advantages that support decision-making The instrument provides digital readout ergonomics that simplify logging and comparison of depth values during inspection routines. The large-display readout and consistent numeric performance make the caliper an effective tool for standardised measuring procedures and quality control documentation. Its specifications align with typical workshop needs where speed, repeatability and clarity are the primary drivers for selecting inspection tools. Speak to Metav Werkzeuge for tailored advice on using Microtech Metrology depth calipers with IP67 protection and a 0–500 mm measuring range; consultants in Emmerich are available by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to discuss suitability for specific applications Technical Data Article number: 1432030503 GTIN: 4061905459818 Manufacturer: Microtech Metrology ECLASS: 21170344 Digital display: Swiss Digit, 11 mm Protection class: IP67 Facts Measuring range: 0–500 mm Resolution: 0.01 mm Accuracy: ±0.04 mm Display height: 11 mm Special features Digital depth caliper Swiss Digit high-contrast display Robust, sealed electronics Suitable for medium-range workshop measurements FAQ What measuring range does the caliper cover? The depth caliper has a measuring range of 0–500 mm, placing it in the medium-range category suitable for larger fixtures and assemblies. What resolution and accuracy can be expected? The instrument provides a resolution of 0.01 mm with a stated accuracy of ±0.04 mm, suitable for standard workshop quality control tasks. Is the caliper protected against dust and liquids? Yes, the device carries an IP67 rating, offering dust-tight protection and water immersion resistance for use in demanding environments. Does the display offer good legibility in the workshop? The Swiss Digit display with 11 mm character height delivers clear, easy-to-read figures to reduce reading errors and speed inspections. Is the instrument supplied with calibration documentation? The product is delivered with standard calibration; ISO 17025 calibration is not indicated for this item. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
500mm Depth Gauge Digital With Nail Tip, Color Touchscreen, Wireless+USB, IP54 - Microtech Metrology
Take advantage of precise depth measurement with reliable data transfer and robust workshop protection; the combination of ±0.03 mm accuracy, 0–500 mm measuring range and Wireless + USB output supports consistent inspection workflows. Order the digital depth caliper directly via Metav Werkzeuge or consult our specialists for application advice. Digital depth caliper by Microtech Metrology — 0–500 mm, Colour Touchscreen The digital depth caliper from Microtech Metrology is a workshop-grade instrument for accurate depth measurement across medium-sized components, designed for integration into inspection and production processes. Colour 1.54" touchscreen display 0–500 mm measuring range Accuracy ±0.03 mm Wireless + USB data output Precision that reduces rework and speeds inspection The caliper delivers repeatable depth values thanks to a reading resolution of 0.005 mm and a specified accuracy of ±0.03 mm, which together narrow measurement uncertainty for standard machine-shop tasks. This precision is particularly valuable when checking bores, recesses and stepped features where consistent depth data avoids rework and ensures parts meet drawing tolerances. The device is categorised in the medium range (300–500 mm) class, offering a balance between reach and rigidity that suits jig, fixture and general machining applications. Streamlined data capture for quality documentation Equipped with Wireless + USB output and a clear colour 1.54" touchscreen, the instrument simplifies data logging and traceability. Wireless transfer supports real‑time collection on inspection software, while USB offers direct export for manual archiving. These connectivity options reduce transcription errors and speed up quality-control loops, so production decisions are based on reliable numeric evidence rather than manual note taking. Integration into existing metrology chains is straightforward thanks to standard digital interfaces. Built to withstand workshop conditions and frequent use The device meets an IP54 protection rating, which guards against dust ingress and splash water typical in a manufacturing environment, and the robust construction holds alignment over routine handling. The logical digital interface and stable measuring carriage support rapid one-handed operation, making the tool well suited to serial checks on the shop floor. Backed by the Metav distribution and logistics network, the instrument is presented as a pragmatic choice for teams seeking industrial usability without specialist maintenance overhead. Contact Metav Werkzeuge for supply from Emmerich and to discuss technical integration of this Microtech Metrology depth caliper into existing quality workflows Technical data Article number: 1432030507 GTIN: 4061905452659 Brand: Microtech Metrology Category: Digital caliper Key figures Measuring range: 0–500 mm Reading resolution: 0.005 mm Accuracy: ±0.03 mm Display: Colour 1.54" touchscreen Protection class: IP54 Special features Wireless + USB data output Digital operation for depth measurements Medium measuring-range class (300–500 mm) Suitable for workshop and machine‑shop inspection FAQ What measuring range does the caliper cover? The digital depth caliper covers a measuring range of 0–500 mm, placing it in the medium class suitable for fixtures, housings and larger components. How precise are measurements with this instrument? Measurements are delivered with a reading resolution of 0.005 mm and a stated accuracy of ±0.03 mm, appropriate for routine workshop quality control. How can measurement data be exported from the caliper? Data can be transmitted via Wireless connection for live logging or exported over USB for direct transfer to inspection software or spreadsheets. Is the caliper suitable for use on the shop floor? Yes. The device is rated IP54, offering protection against dust and splashes, and built for regular handling in manufacturing environments. Which brand and article number should be referenced for ordering or spare parts? Reference Microtech Metrology and article number 1432030507 when enquiring about the digital depth caliper and available accessories. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
500mm Digital Bore Distance Caliper With 20mm Taper And Fine Adjustment, Supplied In Case - Metav IndustryLine
Combine robust hardened stainless steel construction with a wide 20–500 mm measuring range and a clear digital display to ensure dependable bore‑distance readings; order the Digital bore‑distance caliper directly via Metav Werkzeuge or consult our specialists for system integration. Digital bore-distance caliper M240.294 — Digital caliper with 20 mm cone and 500 mm range (Metav IndustryLine) Digital bore‑distance caliper M240.294 is a precision instrument for measuring centre‑to‑centre distances in bores and holes across machine shops and inspection benches. Digital display mm/inch, ABS/INC, preset Hardened stainless steel construction Measuring range 20–500 mm for medium parts RB2 data output for process integration Reliable centre‑to‑centre measurement for medium components This caliper is designed for the workshop length class that bridges handheld convenience and extended reach: the 20–500 mm range suits routine machine‑shop and fixture measurements where reach and rigidity must be balanced. The instrument will access bore depths and centre distances via a 20 mm measurement cone and probe geometry with probe lengths of 61.5 mm and 216.5 mm, making it easier to position the measuring tips inside bores. The built‑in fine adjustment mechanism facilitates controlled closing of the jaws, which reduces operator‑induced error and supports reproducible readings when working on medium‑sized components. Clear digital readout with integration for quality systems A clear digital display provides readings in millimetres or inches and supports ABS/INC and zero/preset functions for quick offsetting and comparative gauging. The display resolution is 0.01 mm (0.0005 inch), which aligns with standard digital caliper practice for workshop metrology and delivers repeatable values suitable for production control. For data capture and process control the unit offers RB2 data output, enabling straightforward connection to SPC or data‑logging devices so measurements can be recorded and analysed without manual transcription. Robust build for shop‑floor durability and metrology quality Constructed from fully hardened stainless steel, the instrument combines corrosion resistance with the profile stiffness required for repeatable measurements over time. At a weight of 3.6 kg the tool has the mass and stability to feel secure during handling while remaining manageable for single‑operator use. Delivered in a protective transport case, the caliper is protected during transit and storage; the factory standard ensures consistent inspection criteria and a ready‑to‑use instrument for daily measurement tasks. Practical benefits for inspection and production workflows As a dedicated bore‑distance measuring device, this caliper reduces setup time for alignments and hole‑pattern verification, shortening inspection loops and lowering the risk of rework. The combination of fine adjustment and digital presetting speeds comparative checks and first‑article inspections, supporting higher throughput in recurring quality routines. Intended for machine shops, toolrooms and quality departments, the instrument provides a balance of accessibility and metrological reliability that helps maintain production momentum. For advice on integrating the M240.294 into inspection processes or to request detailed technical information, contact Metav Werkzeuge in Emmerich by phone or email for a tailored consultation. Technical Data Article number: M240.294 GTIN: 4054469159126 Weight: 3.6 kg Material: hardened stainless steel Factory standard: Werksnorm Numbers / Core technical data Measuring range: 20–500 mm Resolution: 0.01 mm / 0.0005 inch Cone diameter: 20 mm Probe lengths: L1 = 61.5 mm; L2 = 216.5 mm Display functions: mm/inch, ABS/INC, NULL/PRESET Special features Digital display with ON/OFF, mm/inch, ABS/INC, NULL/PRESET Fine adjustment for controlled probing Data output: RB2 for process integration Delivered in protective transport case FAQ What measuring tasks is this caliper best suited for? The caliper is optimised for centre‑to‑centre and bore‑to‑bore distances on medium‑sized components; its 20–500 mm range covers typical machine‑shop and fixture measurements. What accuracy and resolution can be expected from the display? Readings are shown with a resolution of 0.01 mm (0.0005 inch), providing workshop‑level precision suitable for quality‑control and production inspection. How does the RB2 data output support integration? RB2 data output on the instrument allows digital transfer of measured values to data‑collection systems or SPC software, enabling automated logging of results without manual entry. Is the caliper protected against corrosion and heavy use? Yes; the device is manufactured from fully hardened stainless steel, offering both wear resistance and protection against corrosion in typical workshop environments. Does the device include fine adjustment for sensitive measurements? A dedicated fine adjustment control is provided to allow precise approach and secure positioning during bore measurements. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Digital Depth Caliper Colour Touchscreen, Wireless/USB, IP54, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of precise medium-range measuring capability, integrated wireless data transfer and an included ISO 17025 calibration certificate for reliable quality control; order the calibrated depth caliper directly via Metav Werkzeuge or consult our specialists for application support. Depth caliper with microcomputer — 0–500 mm range, colour touch display (Microtech Metrology) The Depth caliper with microcomputer is a precision digital instrument designed for medium-range depth measurements in workshops, toolrooms and quality departments up to 500 mm. 0–500 mm measuring range Colour 1.54" touch display Wireless and USB data output Delivered calibrated to ISO 17025 Accurate medium-range measurement for consistent results This instrument is tailored to the Mittel class of calipers, covering a 0–500 mm range that balances reach and stiffness for everyday machining tasks. With a display resolution of 0.01 mm and a documented accuracy of 0.04 mm, the device delivers repeatable readings that support standard inspection routines and assembly checks. The included ISO 17025 calibration certificate confirms traceable measurement performance, reducing uncertainty in quality reports and simplifying compliance for incoming inspection or production control. Streamlined data capture for faster quality workflows Integrated wireless connectivity alongside USB output and a colour 1.54" touchscreen turns manual readings into digital records quickly, cutting transcription time and lowering the risk of input errors. The digital interface supports efficient logging of depth measurements into inspection software or a spreadsheet, enabling smoother data handling for batch documentation and statistical process control. This technological setup is particularly useful where frequent data transfer and traceability are required. Robust design for shop-floor reliability Built for regular use, the instrument features handcrafted measuring jaws and an IP54 protection rating, offering resistance to dust and splashing liquids commonly encountered in production environments. The construction emphasises tactile quality and longevity, so handling and fixturing remain precise over repeated cycles. These design choices reduce downtime and maintenance needs, helping to keep inspection routines uninterrupted. Ideal deployment and practical benefits in production The caliper suits machine shops, toolmaking and quality laboratories that require dependable depth measurement without the complexity of larger systems. Its combination of medium-range capacity, clear touchscreen readout and digital outputs supports faster part verification, setup checks and incoming goods inspection. For teams aiming to improve throughput and measurement traceability, this instrument provides a pragmatic step towards more efficient metrology at the workbench. Contact Metav Werkzeuge for tailored advice on integrating this ISO 17025‑calibrated depth caliper into existing inspection processes and to arrange purchase or delivery details Technical data Article number: 1432010507 GTIN: 4061905039089 Brand: Microtech Metrology Measurements Measuring range: 0–500 mm Display resolution: 0.01 mm Accuracy: 0.04 mm Display: Colour 1.54" touchscreen Special features Wireless and USB data output Delivered with ISO 17025 calibration certificate IP54 protection class Handcrafted measuring jaws Digital depth measuring instrument (digital caliper) FAQ What calibration documentation is supplied with the depth caliper? The depth caliper is supplied fully calibrated with an ISO 17025 calibration certificate, confirming traceability and documented measurement uncertainty. Which data interfaces are available for measurement transfer? Measurement data can be transferred via wireless connection or through USB, enabling straightforward integration with inspection software or data-collection systems. What accuracy and resolution can be expected in typical use? The instrument provides a resolution of 0.01 mm and an accuracy value of 0.04 mm, suitable for standard workshop and quality-control tasks within the 0–500 mm range. Is the caliper suitable for shop-floor environments? Yes. With an IP54 rating and robust, handcrafted measuring jaws, the device is designed for regular use in production settings where dust and light moisture are present. Which workshop applications is this instrument most suitable for? It is well suited to depth checks on machined components, fixture set-up, incoming inspection and general toolroom measurement where medium-range, repeatable depth data and digital output are required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
500mm Digital Messschieber mit langem Messschnabel, 0,01mm, IP 67 - Microtech Metrology
Microtech Metrology aus der Ukraine steht seit dreissig Jahren für höchste Qualität und Innovation. In diesem Zeitraum hat die Firma mehr als 130 weltweite Patentanmeldungen registriert.. Das wichtigste auf einen Blick für Messschieber mit langem Messschnabel Messbereich: bis 500mm Ablesung: 0,01mm digitale Ausführung Datenausgang: Wireless Mehr Überblick auf langen Strecken0 bis 500mm Mit einem Messbereich von 0–500mm bleiben selbst ausgedehnte Werkstücke überschaubar. Große Flächen, lange Kanten und weit gesetzte Bohrungen lassen sich strukturiert abfahren, ohne das Bauteil zu drehen oder umzusetzen. Das erleichtert das Prüfen von Formplatten, Trägern, Profilen und Rahmenbauteilen im Vorrichtungs‑ und Formenbau. Der Vorteil zeigt sich im Ablauf: Du bleibst im Takt, behältst den Bezug und kommst schneller zu belastbaren Ergebnissen. Schauen Sie hier, wie wir die Messbereiche klassifiziert haben. Klassifizierung Messbereiche beim Messschieber. Expertentip: Was ist bei der Reinigung der Messschenkel wichtig? Ein Fussel- oder Ölfilm von wenigen µm reicht, um Zehntel mm zu verfälschen. Deshalb vor jeder Messung die Messflächen mit einem fusselfreien Tuch abwischen. Informationen zur technischen Ausstattung: Marke: Microtech Metrology Bezeichnung: Messschieber Bestellnummer: 141073595 Daten: Messbereich: 0-500mm Schnabellänge: 300mm Ablesung: 0,01mm Datenausgang: Wireless Genauigkeit: 0,04mm IP-Schutz: IP 67 mit ISO 17025 Kalibrierzertifikat Querschnitt: 23x6mm Besonderheiten Ausführung: digital Anzeige: Swiss electric Digit Höhe 14mm Messsystem: ABS mit langem Messschnabel Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com
Precision where standard calipers reach their limits
Specialised calipers (also available as specialist calipers and precision calipers) are engineered for measurements that conventional calipers cannot perform reliably. With custom‑shaped jaws, extended measuring ranges and advanced materials, these tools deliver reproducible results down to the micrometre range, making them indispensable for difficult‑to‑access features such as fine grooves, deep bores and complex contours.
How these calipers tackle demanding measurement tasks
Specialised calipers work by adapting jaw geometry and sensing technology to the application: pointed, blade‑shaped, round or offset jaws capture inside and outside dimensions in confined geometries, while digital, analogue and inductive sensing cover different shop and lab requirements. Digital variants offer quick readouts and data transfer via Bluetooth/USB; analogue models remain reliable in humid or rough workshop environments; inductive versions provide extreme accuracy of ±0.001 mm (1 μm), suited to inspection rooms and laboratories. Wear‑resistant materials such as carbide or ceramic tips withstand coolants, abrasion and corrosion for sustained accuracy.
Measurable benefits for production and inspection
- Faster, repeatable measurements in constrained geometries, reducing inspection time.
- Reproducible results to the micrometre range, raising process reliability.
- Longer service life thanks to carbide or ceramic tips, lowering tool replacement frequency.
- Seamless data integration: digital specialised calipers can feed results directly into CAQ systems via Bluetooth/USB, supporting inline quality control.
- Robust performance across environments—from workshop floors to clean labs—thanks to analogue and inductive options.
Metav as a dependable partner for precision measurement
Metav combines decades of expertise with a comprehensive selection for industry, craft and trade. From Emmerich, Metav operates as a quality filter for the European market, supplying high‑precision tools across more than 250,000 product lines. Trusted by over 48,000 customers, Metav makes high accuracy accessible to every workshop while ensuring reliable fulfilment and consistent product quality.
FAQ
What accuracy can I expect from specialised calipers?
Inductive specialised calipers achieve extreme accuracy of ±0.001 mm (1 μm); digital models enable quick readout and transfer, while analogue versions provide reliable shop‑floor stability.
Which jaw shapes are available and what are they best for?
Specialised calipers come with pointed, blade‑shaped, round and offset jaws designed to measure features such as wall thickness of glass ampoules, gear tooth profiles and O‑ring grooves that standard calipers cannot access.
Can specialised calipers be used for inline quality control?
Yes. Digital specialised calipers with Bluetooth/USB support direct data transfer to CAQ systems, enabling inline testing and automated documentation in series production.
Are there variants suited to harsh workshop environments?
Analogue specialised calipers are less sensitive to moisture and rough handling, and units fitted with carbide or ceramic tips resist coolants, abrasion and corrosion for durable, accurate performance.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com