Precision specialist calipers for inaccessible measurements
Specialist calipers are engineered to measure fine grooves, deep bores and complex contours with reproducible accuracy down to the micrometre, delivering reliable results where standard calipers reach their limits. Designed with customised jaw shapes and robust materials such as carbide or ceramic tips, these calipers excel in measuring thin-walled aerospace structures, medical implants and intricate toolroom cavities while resisting coolants and abrasion. Available as digital, analogue and inductive variants, they offer options from quick-read displays and data transfer to extreme accuracy of ±0.001 mm for laboratory use. By combining tailored jaw geometries with durable construction, these precision tools improve inline quality control and support both prototype and series production.
300mm Digital Depth Gauge Inductive Sensor IP67, 0.01mm Resolution, Stainless Hardened, Supplied in Case - Metav IndustryLine
The combination of robust IP67 protection, an inductive measuring system and a 0.01 mm display resolution delivers dependable depth measurement for everyday workshop control; benefit from fast, repeatable readings and corrosion‑resistant construction. Order via Metav Werkzeuge or contact our consultants for specification advice and prompt supply. Digital depth gauge M218.122.D — 0–300 mm range, IP67 protection Digital depth gauge M218.122.D provides precise depth measurement for machine shops and quality control, designed as a rugged industrial instrument for standard workshop tasks IP67 protection against dust and water immersion Inductive measuring system for long service life 0.01 mm display resolution for fine control Hardened stainless steel construction Complies with DIN 862 for workshop metrology Precise readings that fit the workshop routine The instrument is built around an inductive measuring system and a standard 0–300 mm range, classifying it as a workshop‑standard depth gauge that balances reach and stiffness. With a display resolution of 0.01 mm, the device supports repeatable checks in production and incoming‑goods inspection; the numeric step size is explained on the display and allows operators to distinguish between tolerances comfortably. Compliance with DIN 862 ensures the unit meets recognised dimensional metrology requirements, so results integrate easily into existing QC procedures. Durable construction for harsh working environments A hardened stainless steel body and an IP67 rating protect the instrument from coolant, chips and dust, reducing measurement downtime and prolonging service life. The digital readout runs from a replaceable 3 V CR 2032 battery and the control panel offers MODE, INC, HOLD and 0/ON keys for straightforward handling during repetitive tasks. At approximately 0.6 kg, the gauge is substantial enough to feel stable while remaining portable for bench or on‑machine checks. Simple operation, tailored to industrial use The depth gauge is supplied without data output, which suits inspection stations that record values manually or with stand‑alone documentation procedures. The inductive sensor reduces sliding contact wear compared with mechanical racks, maintaining accuracy over prolonged use. As a Standard class instrument, it is particularly well suited to general metalworking, fixture checks and routine quality control where robust, quick depth measurements are required without the complexity of automatic data transmission. Contact Metav Werkzeuge for specialist advice on integrating the M218.122.D into your workshop workflow and to arrange supply from our Emmerich warehouse Technical data Article number: M218.122.D GTIN: 4054469182957 Label: Digital-Tiefenmaß 300 x 150 mm, IP67 Ohne Datenausgang Brand: Metav IndustryLine Facts Measurement range: 0–300 mm Resolution: 0.01 mm Protection rating: IP67 Weight: 0.6 kg Battery: 3 V CR 2032 Bridge: 150 mm Measuring system: inductive Compliance: DIN 862 Special features Hardened stainless steel construction Digital display with MODE, INC, HOLD, 0/ON buttons No data output (without interface) Robust sensor technology for extended service life FAQ How accurate is the measurement on this digital depth gauge? The device provides a display resolution of 0.01 mm and conforms to DIN 862, offering accuracy and repeatability suitable for routine workshop inspection with clear numeric feedback. Is the gauge suitable for use on a busy shop floor? Yes. The IP67 rating and hardened stainless steel construction make the unit resistant to dust and coolant exposure, so it is appropriate for machine‑shop environments. Can measurement data be exported to a computer or SPC system? This model is supplied without data output, so readings are intended for manual recording or integration into non‑automated inspection processes. What battery does the instrument use and is it easy to replace? The gauge uses a standard 3 V CR 2032 coin cell, which is easily replaced in the field to minimise downtime. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Outside Caliper Flat Tips 0.01mm Resolution, Hardened Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of the 300 mm measuring range, 0.01 mm resolution and hardened stainless construction for consistent shop‑floor results; order directly via Metav Werkzeuge or consult our specialists for application advice. Digital External Caliper M240.052.N – 300 mm range, flat jaws, stainless hardened steel (Metav IndustryLine) The Digital External Caliper M240.052.N is a workshop‑grade digital caliper designed for precise external, internal and depth measurements in standard machine‑shop and inspection tasks. 300 mm measuring range 0.01 mm digital resolution Hardened stainless steel construction Flat 100 mm jaws for groove measurement Precision that fits everyday workshop needs The caliper is configured to the Standard measuring class with a 0–300 mm range, offering an ideal balance between reach and rigidity for general engineering and metalworking. With a display resolution of 0.01 mm, the instrument provides clear numeric feedback suitable for quality control and setup work; in the context of DIN 862, digital calipers in this class typically operate with an expected error band up to ±0.03 mm across the full range, which helps to set realistic tolerances for routine checks. The presented measurement system reduces interpretation time and speeds decision‑making on the bench, improving throughput without sacrificing traceability. Built for repeatability and robust handling Constructed from stainless hardened steel, the caliper resists wear and preserves jaw alignment under frequent use, supporting repeatable measurements across shifts. The flat jaws with a 100 mm length are optimised for groove and slot verification, enabling stable contact on narrow profiles while the overall instrument mass (approx. 0.8 kg) contributes to steadiness during manual measurement. Ergonomic control via dedicated keys keeps routine tasks efficient: the unit includes ON/OFF, ZERO, UNIT and HOLD functions for quick reference capture and mode switching, which is particularly helpful when inspecting batches or transferring values to process documentation. Data output, standards and workshop integration The device provides a RB 5 data output option for connection to inspection stations or data loggers, simplifying the digital transfer of readings into quality management systems and reducing transcription errors. Power is supplied via a 3 V cell, ensuring long operational life between replacements. The caliper is supplied to factory standard (Werksnorm), delivering a dependable baseline for dimensional control in production environments. For customers seeking integration support or bespoke advice on using the interface in an inspection workflow, Metav IndustryLine offers technical guidance and product matching to existing measurement systems. Contact Metav Werkzeuge for tailored advice and secure the Metav IndustryLine digital caliper M240.052.N with 300 mm range for reliable, repeatable measurement results on the shop floor Technical data Article number: M240.052.N GTIN: 4054469160337 eClass: 21170344 Tariff code: 90173000 Facts Measuring range: 0–300 mm Resolution: 0.01 mm Jaw length: 100 mm Weight: 0.8 kg Special features Material: stainless hardened steel Tip style: flat jaws Display: digital with ON/OFF, ZERO, UNIT, HOLD Power: 3 V supply Data output: RB 5 Supplied to factory standard (Werksnorm) FAQ How accurate is the caliper across its range? The Digital External Caliper M240.052.N has a display resolution of 0.01 mm; as a standard digital caliper with a 0–300 mm range, typical error limits for instruments in this class are in the order of ±0.03 mm, providing suitable accuracy for general machining and inspection tasks. Can the caliper measure grooves and narrow slots? Yes, the flat 100 mm jaws are designed to access grooves and slots, enabling stable contact for reliable groove and external measurements with acceptable repeatability. Is data transfer possible to a PC or measurement system? The caliper offers an RB 5 data output option that supports connection to inspection stations or data loggers, facilitating digital capture of readings and integration into quality workflows. What material is the caliper made from and how does that help? Constructed from hardened stainless steel, the instrument resists wear and maintains jaw alignment under frequent use, which helps to preserve measurement accuracy and prolong service life. Does the caliper come ready for inspection work on delivery? The tool is supplied to factory standard (Werksnorm), giving a dependable baseline for measurements; for traceable laboratory calibration certificates, please enquire about additional calibration services. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Outside Caliper With 100mm Depth Rods, Stainless Steel, 0.01mm Resolution, IP54, Plastic Case - Metav IndustryLine
Take advantage of the combination of high-resolution digital readout, a 0–300 mm measuring range and a hardened stainless-steel construction for reliable workshop measurement. Order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. Digital external caliper M240.062.N — 0–300 mm, probe pins (Metav IndustryLine) Digital external caliper M240.062.N is a 0–300 mm precision caliper designed for robust external and groove measurements in general machine and metal workshops High-resolution 0.01 mm digital display Hardened stainless steel construction Integrated probe pins for groove measurement Supplied in a protective transport case Precision and repeatability for everyday workshop control The 0–300 mm measuring range places this instrument in the Standard class, offering the best balance of reach and rigidity for routine machine‑shop and maintenance tasks. The digital readout with a resolution of 0.01 mm (and 0.0005 in display step) provides clear numeric results suitable for production checks and quality control. The instrument is driven by a 3 V power system and features ON/OFF, ZERO, UNIT and HOLD keys for straightforward operation. The combination of a precise display and solid construction reduces interpretation time and increases throughput on the shop floor. Robust design that supports repeatable handling A hardened stainless steel frame with a metal housing ensures corrosion resistance and long service life under workshop conditions. The extended jaw length of 100 mm allows access to deeper external profiles and grooves; the included probe pins are specifically arranged for groove and slot measurement, improving contact reliability in those applications. At 1.05 kg overall mass the tool feels substantial without being cumbersome, and the supplied protective case keeps the instrument safe during transport between workstations or to inspection points. Data-ready features and practical integration With a dedicated RB 5 data output format, the caliper can be integrated into data-collection routines or linked to inspection software for digital logging of measurement series. The instrument’s factory standard configuration supports straightforward use in production environments where quick transfer of results is essential. Ergonomic controls and a readable display cut down cycle time, while the durable build reduces downtime from tool replacement — a practical efficiency gain for small and medium workshops. Contact Metav Werkzeuge in Emmerich to discuss how the M240.062.N can be integrated into your inspection routines, request delivery in a transport case or obtain tailored technical advice from our specialists Technical Data Article number: M240.062.N GTIN: 4054469160351 Manufacturer: Metav IndustryLine Data Measuring range: 0–300 mm Resolution: 0.01 mm / 0.0005 in Weight: 1.05 kg Jaw length: 100 mm Power: 3 V Customs tariff number: 90173000 eCl@ss: 21170344 Special features Hardened stainless steel, metal housing Integrated probe pins for groove measurement Digital display with ON/OFF, ZERO, UNIT, HOLD keys Data output: RB 5 Supplied in a protective transport case Factory standard configuration FAQ What measurement tasks is this caliper best suited to? The M240.062.N digital external caliper from Metav IndustryLine is ideal for general machine‑shop external and groove measurements within the 0–300 mm Standard range, where a balance of reach and rigidity is required. What accuracy and resolution can be expected? The instrument provides a resolution of 0.01 mm (0.0005 in) suitable for standard workshop quality control; results are displayed on the digital readout for quick interpretation. Does the caliper support digital data transfer? Yes — the caliper offers an RB 5 data output for connection to data‑acquisition systems or inspection software to capture measurement series. Are groove and slot measurements possible with this tool? Groove measurement is supported via the integrated probe pins; the M240.062.N is configured specifically to improve contact in slots and narrow profiles. How is the caliper supplied and protected during transport? The caliper is supplied in a protective transport case to prevent damage during handling and transit Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Precision Caliper 0.01mm Resolution, IP54, ISO 17025 Calibrated - Microtech Metrology
Benefit from laboratory-grade traceability together with workshop-ready robustness: ISO 17025 calibration and USB data output ensure reliable quality control and seamless data capture; the IP54-rated construction keeps the tool operable in typical production environments. Order the Microtech Metrology digital caliper directly via Metav Werkzeuge or contact our consultants for application advice. Digital Caliper by Microtech Metrology — 0–300 mm range, USB output, ISO 17025 calibration Digital Caliper from Microtech Metrology for standard workshop and laboratory measurement tasks, combining traceable calibration with robust ingress protection and clear digital readout Factory-calibrated to ISO 17025 USB data output for traceable logs IP54 protection against dust and splash 0–300 mm standard workshop range 9 mm high-contrast digital display Laboratory traceability that supports audit-ready measurement The instrument is delivered fully calibrated to ISO 17025, including a calibration certificate, which provides direct traceability for quality assurance and audit processes. That formal certificate minimises uncertainty in inspection records and supports compliance with internal quality systems. With this level of documented accuracy, routine checks and incoming inspection tasks can be standardised, reducing rework and strengthening supplier confidence in measurement results. Robust performance where workshop conditions matter Designed for everyday use, the caliper combines a 0–300 mm measuring range with an IP54 rating to resist dust ingress and splashed liquids, making it suitable for shop-floor measurement as well as bench inspection. The device achieves an accuracy of ±0.03 mm and a display resolution of 0.01 mm, which meets common industrial tolerances while remaining straightforward to operate. Classified in the standard range for mechanical and metalworking tasks, it balances reach and stiffness for reliable one-hand operation. Direct data capture to streamline quality workflows Equipped with a USB data output and a high‑contrast 9 mm digital display, the instrument simplifies documentation and reduces transcription errors during batch inspection. Measurements can be exported directly to data-collection software or spreadsheets, accelerating reporting and enabling statistical process control. This connectivity is particularly useful where traceable measurement logs are required for production records or process qualification. Ergonomic design and practical features for consistent results The caliper’s jaw geometry and a jaw length of 43 mm support both external and internal measurements with comfortable handling. The electronic slide provides smooth, repeatable readings without additional measuring force, which helps protect delicate surfaces. Delivered ready for immediate use with its calibration certificate, the tool is a pragmatic choice for workshops and laboratories seeking dependable, measurable results with minimal setup. For ISO 17025-traceable measurement and practical integration advice, contact Metav Werkzeuge in Emmerich—our specialists will advise on suitability for specific applications and provide the calibration documentation required for quality systems Technical data SKU: 141430300 GTIN: 4061905459443 Manufacturer: Microtech Metrology ECLASS: 21170344 Calibration: ISO 17025 certificate included Facts Measuring range: 0–300 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Display height: 9 mm Jaw length: 43 mm IP rating: IP54 Special features USB data output Digital display Delivered calibrated to ISO 17025 No measuring force Category: Standard (100–300 mm range) FAQ Is the instrument supplied with a calibration certificate? Yes. The Microtech Metrology digital caliper is supplied fully calibrated to ISO 17025 and includes the calibration certificate required for traceability. Can measurement values be transferred directly to a PC? Yes. The caliper has a USB data output that enables direct transfer of measurement data to data-collection software or spreadsheets. What accuracy and resolution can be expected across the measuring range? The instrument provides a resolution of 0.01 mm and an accuracy of ±0.03 mm across the 0–300 mm range. Is this caliper suitable for shop-floor use? Yes. With an IP54 rating and a robust build, the caliper is suitable for workshop environments while providing laboratory-grade calibration. Which SKU identifies this model for ordering? Order reference: SKU 141430300, GTIN 4061905459443 for the Microtech Metrology digital caliper. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Digital Precision Caliper For Internal Grooves, 13mm Display, USB, IP54, ISO 17025 Calibrated - Microtech Metrology
Take advantage of traceable calibration, reliable USB data capture and robust IP54 protection to keep measurement routines efficient and auditable; order the calibrated instrument directly via Metav Werkzeuge or ask the consultants for specification support. Microtech Metrology digital caliper (USB output, IP54, 300 mm) The Microtech Metrology digital caliper is a workshop-grade measuring instrument for precise external, internal and depth measurements across a 9–300 mm range, designed for production and quality‑control environments. ISO 17025 calibration certificate included USB data output for direct SPC collection IP54 splash and dust protection Large 13 mm digital readout for quick inspection Consistent workshop performance with a standard‑range caliper This instrument sits in the Standard class of calipers (measuring range up to 300 mm), which balances reach with rigidity for general machine‑shop and metalworking tasks. The 9–300 mm top‑jaw and 17–300 mm lower‑jaw ranges extend the usable span for common inspection points while keeping the slide stable enough for reproducible results. Classification as a standard‑range tool means familiar handling and one‑hand operation on typical 150/200/300 mm workshop setups. Traceable accuracy and legible digital output for quality control Calibration to ISO 17025 ensures that the caliper is delivered with a traceable calibration certificate, making it suitable for documented inspection routines. The instrument provides a display resolution of 0.01 mm with an accuracy of ±0.04 mm, values that support routine dimensional checks and first‑article inspections. The 13 mm digital readout improves legibility on the shop floor, reducing interpretation errors and speeding up repetitive measurement tasks. Fast data transfer and durable protection for production workflows Integrated USB data output enables direct transfer of readings into statistical process control (SPC) software or measurement logs, removing manual transcription and lowering the risk of logging errors. The tool’s IP54 rating gives protection against workshop dust and water spray, extending reliable operation in tougher environments. Jaw lengths of 30/70 mm provide practical access to deeper grooves or internal features without compromising handling. How this caliper supports inspection and documentation Delivered calibrated to ISO 17025, the device simplifies audit trails and conformity checks for internal quality systems. The combination of reliable measurement figures, clear digital display and wired data export creates an efficient path from measurement to documentation and analysis. As a product intended for everyday metrology tasks, it fits into assembly, incoming‑goods inspection and routine in‑process checks where documented accuracy and data capture are required. For traceable, workshop-ready measuring capability request the Microtech Metrology digital caliper with ISO 17025 certificate from Metav Werkzeuge—our advisers in Emmerich can confirm technical details and arrange prompt delivery. Technical Data SKU: 141220300 GTIN: 4061905082047 Manufacturer: Microtech Metrology Digital display height: 13 mm Data output: USB Protection class: IP54 Accuracy: ±0.04 mm Resolution: 0.01 mm Measuring range top jaw: 9–300 mm Measuring range lower jaw: 17–300 mm Jaw lengths: 30/70 mm ISO 17025 calibration certificate: included Numbers / Core technical data Resolution (display): 0.01 mm Stated accuracy: ±0.04 mm Maximum measuring range: 300 mm Minimum measuring range: 9 mm Display digit height: 13 mm Special features / Versions USB data output for direct SPC and logging IP54 splash and dust protection Delivered with ISO 17025 calibration certificate Suitable for external, internal and depth measurements FAQ What measuring range does this digital caliper cover? The Microtech Metrology digital caliper covers 9–300 mm on the main jaw and 17–300 mm on the lower jaw, placing it in the standard workshop range up to 300 mm. Is the caliper supplied calibrated and with a certificate? Yes — the caliper is supplied fully calibrated with an ISO 17025 calibration certificate, which supports traceable inspection records. How are readings transferred to a PC or data logger? Measurements are exported via the integrated USB data output, allowing direct capture into SPC software or measurement logs for efficient documentation. What level of protection does the instrument offer for workshop use? The instrument has an IP54 rating, protecting against dust ingress and splashing water typical in a workshop environment. What resolution and accuracy can be expected from the display? The digital display resolves to 0.01 mm, with an overall stated accuracy of ±0.04 mm, suitable for routine quality control and shop‑floor inspection. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Digital Precision Caliper For Internal Grooves, Swiss Digit Display 11mm, IP67, ISO 17025 Calibrated - Microtech Metrology
Benefit from fully traceable measurement results thanks to ISO 17025 calibration, robust IP67 protection and wireless data transfer; these features ensure repeatable quality checks and efficient data capture on the shop floor. Order the precision digital caliper directly via Metav Werkzeuge or ask our consultants if needed. Precision digital caliper by Microtech Metrology – IP67, ISO 17025 calibrated The precision digital caliper is a rugged, shop‑floor capable measuring instrument with a high‑contrast Swiss Digit display and wireless output, designed for reliable inspection and production measurement tasks. ISO 17025 calibrated delivery IP67 dust and water protection 11 mm Swiss Digit high-contrast display Wireless data output for traceable logging Reliable, traceable measurements for production control Delivering fully accredited calibration, this instrument is supplied with an ISO 17025 calibration certificate, which formalises measurement traceability and reduces uncertainty in quality records. The combination of wireless data transmission and a robust enclosure rated IP67 removes common process bottlenecks: measurements can be transferred directly to inspection software without manual re‑entry, while the environmental protection minimises downtime from contamination or coolant exposure. With an accuracy ±0.04 mm, the caliper meets many workshop and production control tolerances, making it a practical choice for recurring dimensional checks and incoming inspection. Practical design that speeds up everyday tasks A clear Swiss Digit display (11 mm height) and compact jaw geometry (30/70 mm) make the gauge straightforward to read and handle in confined or busy workstations. The measurement range of 9–300 mm places the tool in the standard class for machine and metalworking shops, offering the best balance between reach and stiffness for general fabrication and maintenance tasks. Because the readout resolution is 0.01 mm, the instrument provides precise numerical feedback while remaining fast to operate; this reduces cycle time for batch checks and simplifies documentation of conformity. Integration and quality assurance made simple Wireless data output supports seamless logging and quality documentation, enabling efficient batch traceability and statistical process control. The instrument’s combination of a digital readout, robust housing and an accredited calibration certificate reduces interpretation errors and audit risks: recorded values are reproducible and verifiable. For procurement and workshop managers this means fewer interventions, faster inspection loops and a clearer audit trail—advantages that translate directly into improved throughput and lower rework rates. For tailored advice on integrating the Microtech Metrology calibrated caliper into existing inspection workflows, contact Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com — to discuss specifications and system compatibility Technical data Article number: 141220304 GTIN: 4061905459641 Manufacturer: Microtech Metrology Digital display: Swiss Digit, 11 mm Data output: Wireless Protection class: IP 67 Calibrated: ISO 17025 certificate included Facts Measurement range: 9–300 mm Minimum measurement: 9 mm Maximum measurement: 300 mm Resolution (reading): 0.01 mm Accuracy: ±0.04 mm Jaw lengths: 30/70 mm Special features IP67 dust‑ and water‑resistant design Wireless data transmission for direct logging Swiss Digit high‑contrast display for quick readings Fully ISO 17025 calibrated with certificate Digital caliper category (Messschieber Digital) Suited to workshop and inspection environments FAQ What measurement range does the caliper cover? The caliper covers a measurement range of 9–300 mm and is classed as a standard workshop instrument; details refer to the precision digital caliper by Microtech Metrology (SKU 141220304). Is the instrument delivered calibrated? Yes — the device is supplied fully calibrated according to ISO 17025 and includes the traceable calibration certificate with delivery. Can the caliper be used on the shop floor near coolants or dust? Yes. The caliper’s IP67 rating provides dust and water resistance suitable for harsh workshop conditions while maintaining stable performance. How are measured values recorded and exported? Measured values can be transmitted wirelessly for direct logging into inspection software, enabling efficient documentation and reducing manual transcription errors. Which applications are best suited for this caliper? Typical applications include incoming inspection, in‑process checks and general workshop measurements where a reliable, calibrated digital instrument is required for reproducible results. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Digital Precision Caliper For Pipe Wall Thickness Measurement Color Touchscreen, IP54, ISO 17025 Calibrated - Microtech Metrology
Take advantage of precise workshop control through the combination of a 0–300 mm measuring range, assured 0.005 mm reading resolution, and seamless Wireless + USB data transfer; order directly via Metav Werkzeuge or consult our specialists for integration into inspection routines. Precision Caliper — Digital measuring instrument with Colour 1.5" touchscreen and Wireless + USB The Precision Caliper is a workshop-grade digital caliper designed for general machine‑shop and quality‑control tasks with a measuring range up to 300 mm, offering robust connectivity and ISO‑traceable calibration. Colour 1.5" touchscreen display Wireless and USB data output Delivered calibrated to ISO 17025 with certificate High‑accuracy control for everyday production This digital measuring instrument brings industrial accuracy to routine inspections: the 0–300 mm measuring range covers standard workshop needs while the 0.005 mm display resolution supports fine tolerance checks. A predictable measurement force 1–20 N reduces variability during manual measuring, which translates into fewer rejected parts and faster go/no‑go decisions. The result is greater process reliability and a reduced need for rework. Fast data capture to speed up quality workflows Integrated Wireless + USB data output ensures measurement values enter inspection software or spreadsheets without manual transcription, cutting administration time and human error. The Colour 1.5" touchscreen provides clear readouts and simple operation on the shop floor, while the digital format supports traceable batch documentation. This connectivity directly improves throughput by simplifying data logging and analysis. Durable construction for workshop conditions Built to withstand everyday use, the instrument carries an IP54 protection rating for resistance against dust and splash‑water. A robust jaw design with a 50 mm jaw length and 4 mm probe diameter provides stable contact and repeatable results on medium‑sized components. The caliper’s construction supports reliable handling in production environments without compromising measurement integrity. Traceable calibration and quality assurance Delivered fully calibrated to ISO 17025, the instrument arrives with an official calibration certificate for immediate use in quality assurance workflows and audits. This formal traceability shortens qualification times for incoming inspection tools and gives procurement confidence in measurement validity. For regulated environments, the included certificate simplifies compliance and documentation. Contact Metav Werkzeuge to discuss how the Microtech Metrology precision caliper, delivered with an ISO 17025 calibration certificate, can be integrated into inspection or production processes at your facility Technical Data Article number: 141230307 GTIN: 4061905037740 Manufacturer: Microtech Metrology ECLASS: 21170344 Digital display: Colour 1.5" touchscreen Facts Measuring range: 0–300 mm Resolution / reading: 0.005 mm Measurement force: 1–20 N Jaw length: 50 mm Probe diameter: 4 mm Protection class: IP54 Data output: Wireless + USB Special features Delivered calibrated to ISO 17025 with certificate Standard workshop caliper category (100–300 mm) Digital interface for direct data capture Suited for machine‑shop and quality control applications FAQ What measuring range does the instrument cover? The precision caliper covers a measuring range of 0–300 mm, which places it in the standard workshop category suitable for general machine‑shop and inspection tasks. Is the caliper delivered calibrated? Yes, the instrument is supplied fully calibrated and includes an ISO 17025 calibration certificate from Microtech Metrology. How are measurement values exported? Measurement data can be transferred via Wireless + USB outputs for direct capture into inspection software or data tables. What environmental protection does the device offer? The caliper has an IP54 rating, providing dust protection and splash‑water resistance appropriate for typical workshop conditions. What reading resolution and repeatability can be expected? The digital readout provides a 0.005 mm resolution with repeatable measurements when used with a consistent measurement force in the specified 1–20 N range. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Digital Precision Caliper for Pipe Wall Thickness Measurement Swiss Digit Display 11mm IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of a robust combination of IP67 ingress protection, ISO 17025 calibration with certificate and a clear Swiss Digit display to secure reliable measurements on the shop floor; the instrument’s ±0.03 mm accuracy across its 0–300 mm range keeps quality control efficient and reproducible. Order via Metav Werkzeuge or consult the team for specification advice. Messschieber — digital caliper with Swiss Digit display and IP67 protection Messschieber provides a durable, calibrated measuring instrument for industrial and workshop dimensional control, optimised for standard-range tasks up to 300 mm. IP67 protection for harsh environments ISO 17025 calibration with certificate Swiss Digit display, 11 mm height High accuracy ±0.03 mm, 0–300 mm range Proven traceability for dependable measurement results This digital caliper is supplied fully calibrated under ISO 17025, which guarantees traceability and a documented calibration certificate with the instrument. The accredited calibration reduces uncertainty in acceptance testing and quality control, making the device suitable for regulated production and incoming inspection. The ±0.03 mm specification across the full 0–300 mm span aligns with common industrial tolerances and supports consistent pass/fail decisions without repeated adjustments. Designed for workshop use and rougher conditions Equipped with IP67 protection, the caliper withstands dust and water exposure typical on the shop floor, preserving electronics and mechanical accuracy. The Swiss Digit display with 11 mm character height ensures rapid readability in busy environments, speeding up inspection loops and reducing handling time. Together, robust sealing and a high-contrast display contribute to faster throughput and fewer measurement interruptions during daily production. Precision contact surfaces and reduced maintenance Hand-finished measuring faces improve seating and contact repeatability, while a self-lubricating slide reduces wear and keeps movement smooth over long service intervals. These workmanship details translate into sustained measurement reliability and lower lifecycle maintenance. The instrument’s durable construction and refined contact geometry help maintain calibration stability between checks, conserving inspection resources and lowering total cost of ownership. Practical benefits that aid production control Compact enough for bench or portable use yet offering the reach of a standard-length instrument, this caliper suits routine machining and assembly checks where reach, stiffness and single-handed handling are balanced. The clear digital readout reduces transcription errors and shortens inspection cycles, supporting lean workflows and faster feedback to operators. For procurement, the combination of factory calibration, industrial protection and precise readout provides a practical, verification-ready tool for quality assurance. For tailored advice about the Microtech Metrology caliper or to confirm compatibility with specific inspection routines, contact Metav Werkzeuge’s technical team in Emmerich for product matching and delivery options. Technical Data SKU: 141230303 GTIN: 4061905037399 Manufacturer: Microtech Metrology Display: Swiss Digit, 11 mm height Protection class: IP67 Calibration: ISO 17025 certificate included Facts Measuring range: 0–300 mm Resolution (display): 0.01 mm Accuracy: ±0.03 mm Beak length: 50 mm Measuring cone diameter: 4 mm Special features Digital caliper (digital: true) Handmade measuring jaws Self-lubricating slide E-class: 21170344 FAQ What level of calibration is supplied with this caliper? The caliper is delivered fully calibrated to ISO 17025 standards and includes the corresponding calibration certificate for traceability. Is the instrument suitable for use on the shop floor? Yes, the IP67 protection and robust electronics make the instrument suitable for industrial and workshop environments where dust and splash resistance are required. What is the measuring accuracy over the full range? The instrument provides an accuracy of ±0.03 mm across the 0–300 mm measuring range, matching standard industrial quality requirements. Does the caliper include a clear digital readout for quick inspections? A high-contrast Swiss Digit display with 11 mm character height ensures rapid legibility for inspection tasks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Digital Precision Caliper For Pipe Wall Thickness Measurement, Swiss Digit Display 11mm, IP67, ISO 17025 Calibrated - Microtech Metrology
Reliable, traceable measuring for workshop and inspection: combine wireless data transfer, IP67 protection and ISO 17025 calibration for consistent quality control. Order the digital caliper directly via Metav Werkzeuge or ask our consultants if needed. Digital Caliper by Microtech Metrology — Wireless data, IP67 protection The Digital Caliper is a 0–300 mm precision measuring instrument for machining and quality inspection, offering wireless data output and laboratory-grade calibration. Wireless data transfer (real‑time) IP67 dust and water protection ISO 17025 calibrated with certificate High‑contrast 11 mm Swiss Digit display Resolution 0.01 mm, accuracy ±0.03 mm Speed and traceability for production and inspection With a resolution of 0.01 mm and an accuracy of ±0.03 mm, this measuring tool enables reliable quality checks across typical workshop tasks. The combination of wireless data transfer and an included ISO 17025 calibration certificate removes manual transcription steps and documents traceability for audit trails. For users who run repeat inspections or batch checks, the electronic readout and wireless output reduce operator-related variance and accelerate data capture, improving throughput without compromising measurement integrity. Robust construction for demanding shop‑floor use Designed for the standard workshop band of 0–300 mm, this caliper strikes a balance between reach and stiffness, making it ideal for general engineering and metalwork measurements. The IP67 rating means the instrument tolerates dust and temporary immersion, so measurements remain dependable even in damp or oily environments. A 50 mm jaw length supports secure grip on larger features while maintaining accessibility for typical part geometries. This robustness translates into fewer tool changes and reduced downtime in daily production. Clear readout and seamless data integration The large 11 mm Swiss Digit display ensures quick, unambiguous readings in varied lighting, while the wireless data output simplifies connection to data loggers and inspection software. This reduces transcription errors and speeds up quality‑control documentation. Supplied with laboratory calibration to ISO 17025, the instrument is ready for traceable use in incoming inspection, in‑process checks and final acceptance testing. Metav’s product selection is aimed at making accurate metrology accessible across workshops; technical advisors can assist with integrating measurement data into existing workflows. Choose Microtech Metrology’s calibrated digital caliper for dependable, auditable measurements — contact Metav Werkzeuge in Emmerich for specialist advice or to place an order: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 141230304 GTIN: 4061905457883 Manufacturer: Microtech Metrology Facts Measuring range: 0–300 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Display height: 11 mm Jaw length: 50 mm Special features Wireless data output IP67 protection ISO 17025 calibration certificate included Swiss Digit display Digital caliper, standard workshop range FAQ Is the digital caliper delivered calibrated? The digital caliper from Microtech Metrology (SKU 141230304) is supplied fully calibrated to ISO 17025 and includes a calibration certificate. Can the caliper be used in wet or dusty conditions? Yes. The Microtech Metrology digital caliper has an IP67 rating, providing protection against dust ingress and temporary immersion in water. What level of precision can be expected in routine checks? Expect a resolution of 0.01 mm and an accuracy of ±0.03 mm with the Microtech Metrology digital caliper, suitable for standard quality‑control tasks in machining and inspection. How can measurement data be collected from the instrument? The caliper offers wireless data transfer for direct capture into data loggers or inspection software, minimising manual entry and accelerating reporting. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Digital Precision Caliper Long Inside Jaws IP54, ISO 17025 Calibrated - Microtech Metrology
Take advantage of traceable calibration and robust workshop performance: the instrument combines an extended 0–300 mm measuring range with a clear digital readout and an ISO 17025 calibration certificate for guaranteed measurement reliability. Order through Metav Werkzeuge or consult our technical advisers for specification matching and delivery. Digital Precision Caliper (0–300 mm, ISO 17025 calibrated) — Microtech Metrology Digital Precision Caliper for general workshop and quality control tasks, offering a wide standard range and protected electronics for robust everyday use ISO 17025 calibration certificate included 0–300 mm measurement range Digital display with 0.01 mm resolution IP54 splash protection Consistent, traceable results for shop-floor quality control The caliper delivers reproducible readings across common workshop tasks thanks to its 0–300 mm range and a clear digital display with 0.01 mm resolution. The stated measurement accuracy of ±0.04 mm supports routine dimensional checks where fast, reliable decisions are required. These characteristics reduce rework and downtime by enabling quicker pass/fail assessments at control stations and on assembly benches. The instrument is suitable for both component inspection and setup verification in mechanical and metalworking environments. Calibrated for compliance and audit readiness Supplied with a full ISO 17025 calibration certificate, the measuring tool meets formal traceability requirements for quality systems and audits. The calibration documentation records the instrument’s performance against national standards and simplifies incorporation into internal quality records. For procurement and inspection processes that demand documented traceability, the included calibration certificate removes ambiguity and saves administrative effort during incoming inspection or periodic verification rounds. Robust design that copes with workshop conditions Protected to IP54, the caliper’s electronics are resistant to dust ingress and splashing fluids commonly encountered at machine tools and preparation benches. The slider and jaws are engineered for frequent handling: long measuring jaws (40 / 41.5 mm) extend access for internal measurements while maintaining jaw stiffness for repeatability. The combination of practical ergonomics and ingress protection supports prolonged service life in daily industrial use. Practical efficiency and application focus As a digital measuring instrument from Microtech Metrology, the caliper is tailored to standard machine‑shop needs: rapid readout, straightforward operation and a rugged specification minimise measurement interruptions. Typical applications include incoming part checks, set-up measurements and quick dimensional validation on the shop floor. The instrument’s features help streamline inspection routines and reduce the time spent transferring values into quality reports or process control systems. Contact Metav Werkzeuge for delivery details, calibration documentation and advice on integrating the Microtech Metrology digital precision caliper into existing inspection procedures Technical data SKU: 141130301 GTIN: 4061905452376 Manufacturer: Microtech Metrology ECLASS: 21170344 Numbers / Core technical data Measurement range: 0–300 mm Resolution (display): 0.01 mm Stated accuracy: ±0.04 mm Display height: 11 mm Jaw lengths: 40 / 41.5 mm Protection class: IP54 Calibration: ISO 17025 certificate supplied Special features / Designs Digital caliper design for workshop and quality control Long measuring jaws for internal measurements Robust slider and ergonomic thumb roll Supplied with traceable calibration documentation FAQ Is an official calibration certificate supplied with the caliper? Yes. The Microtech Metrology digital precision caliper is delivered with an ISO 17025 calibration certificate, documenting traceability and measured values. What measurement resolution and accuracy can be expected? The instrument provides a 0.01 mm display resolution with a stated accuracy of ±0.04 mm, suitable for routine workshop and inspection tasks. Is the caliper protected against coolant or dust? The caliper carries an IP54 rating, offering protection against dust ingress and splashing liquids typical in machine-shop environments. Can the caliper handle internal measurements reliably? Yes. The long measuring jaws (40 / 41.5 mm) are designed to facilitate internal measurements while maintaining jaw stiffness for repeatable results. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Digital Precision Caliper Long Internal Measuring Tips, IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of a robust, workshop-grade digital measuring instrument with IP67 protection and a 0–300 mm measuring range for dependable everyday use; the caliper arrives fully calibrated under ISO 17025 with a traceable calibration certificate. Order the instrument directly via Metav Werkzeuge or consult the Metav team for technical advice. Digital Caliper (0–300 mm) by Microtech Metrology — IP67, ISO 17025 The Digital Caliper (0–300 mm) is a rugged, precision measuring instrument designed for general machine‑shop and metalworking tasks where repeatable results and environmental resistance are required. IP67 protection for wet and dusty environments Delivered with ISO 17025 calibration certificate 0–300 mm range, 0.01 mm resolution 11 mm high digital display for clear readout Consistent measurement performance for production environments With a measuring range of 0–300 mm and an electronic resolution of 0.01 mm, this digital caliper is sized for the standard workshop needs of maintenance, production inspection and toolroom use. The instrument’s specified accuracy of 0.04 mm ensures that checks on finished parts, fixtures and assemblies remain within practical tolerance bands for everyday mechanical and metalworking tasks. The large 11 mm digital display improves legibility in busy workplaces, reducing reading errors and speeding routine checks. Built to withstand workshop conditions and daily handling Rated IP67, the caliper is protected against dust ingress and short‑term water immersion, which adds reliability in harsher production environments or near coolants and oils. The unit’s robust construction and long internal measuring tips (40/41.5 mm) extend the useful jaw reach for deeper internal features while preserving jaw stiffness. This combination of environmental protection and extended jaw geometry reduces rework caused by damaged instruments and supports longer service intervals. Ergonomics and practical operation that save time The instrument’s intuitive digital function and crisp display make measurement faster than interpreting nonius scales, while the electronic reading reduces subjective reading error. The long tip geometry provides better access for internal measurements without needing specialized gauges, and the smooth slide action with secure locking allows repeatable set‑ups. For calibration-sensitive workflows the included ISO 17025 certificate documents traceability and simplifies quality‑management records for incoming inspections or in‑house audits. Traceability and quality assurance for serial production Delivered fully calibrated according to ISO 17025, the caliper comes with a traceable calibration certificate suitable for integration into formal inspection routines. This guarantees documented measurement performance and supports compliance with quality systems. As a standard-range instrument, it covers the most common workshop tasks while offering data suitable for statistical process control and operator checks, increasing confidence in pass/fail decisions on the shop floor. For traceable, workshop-ready measurements contact Metav Werkzeuge to order the Microtech digital caliper with ISO 17025 calibration and to discuss immediate delivery from Emmerich. Technical data Article number: 141130303 GTIN: 4061905452390 Brand: Microtech Metrology Facts Measuring range: 0–300 mm Resolution: 0.01 mm Specified accuracy: 0.04 mm Display height: 11 mm Protection class: IP67 Long measuring tips: 40 / 41.5 mm Special features Digital caliper, workshop grade Delivered with ISO 17025 calibration certificate Robust, sealed electronics Large, high‑contrast digital display FAQ What measuring range does the caliper cover? The Microtech digital caliper covers a measuring range of 0–300 mm, suitable for standard workshop and machine‑shop applications. Is the instrument delivered calibrated and traceable? Yes, the caliper is supplied fully calibrated according to ISO 17025 and includes a calibration certificate for traceable documentation. Can the caliper be used near coolants or in dusty areas? With an IP67 rating, the instrument is protected against dust ingress and temporary immersion, making it suitable for challenging workshop conditions. How legible is the display for rapid checks? The caliper features a clear 11 mm high digital display, designed for quick and reliable readings during repetitive inspection tasks. Do the long internal tips improve access for internal measurements? The extended tip lengths of 40 / 41.5 mm increase reach for internal features, enabling measurements in deeper bores and recesses without specialised fixtures. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Digital Precision Caliper Long Internal Measuring Tips, IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of traceable laboratory calibration and robust shopfloor protection combined with wireless data transfer for reliable measurement workflows; benefit from an ISO 17025 calibration certificate and IP67 ruggedness. Order the instrument via Metav Werkzeuge or consult our advisers for application-specific advice. Digital Caliper — Microtech Metrology wireless caliper with ISO 17025 calibration and IP67 protection Digital Caliper is a precision measuring instrument for workshop and inspection use, designed for standard-range measurements up to 300 mm with robust ingress protection and wireless data transfer. ISO 17025 calibration certificate included Wireless data output for painless logging IP67 protection for harsh environments Swiss Digit 11 mm display, 0.01 mm readout Traceable precision for everyday quality control The instrument is supplied as a Standard‑class caliper (measuring range up to 300 mm), which balances reach and stiffness for general machine‑shop tasks. Its delivery includes a full ISO 17025 calibration certificate, providing a documented measurement chain that simplifies internal audits and acceptance testing. With a display resolution of 0.01 mm and a stated accuracy ±0.04 mm, the device supports routine dimensional checks and helps keep process tolerances under control without over‑engineering test equipment. Reliable data capture and workshop resilience A Swiss Digit display with 11 mm-high digits ensures clear readings at the bench, while wireless data output speeds up traceability and reduces transcription errors during batch inspections. The caliper's IP67 rating protects electronics from coolant, chips and dust, increasing uptime in demanding production environments. The relatively long jaw length (40 / 41.5 mm) enhances access for interior measurements, making the instrument suitable for a variety of internal and external gauging tasks where consistent readout and data transfer are required. Practical benefits that simplify measurement routines Designed for fast handling and repeatable results, the measuring tool offers an ergonomic feel and immediate digital feedback for pass/fail decisions. The combination of robust construction, clear display and wireless connectivity reduces cycle time for inspection steps and supports integration with digital quality systems. Supplied by a manufacturer experienced in metrology components, the device is a pragmatic choice for workshops that need accredited calibration and straightforward data handling without complex setup. For accredited precision and practical workshop integration, contact Metav Werkzeuge in Emmerich for tailored advice and ordering; Metav's specialists will assist with technical details and ensure the right configuration for the application. Technical Data Article number: 141130304 GTIN: 4061905452444 Manufacturer: Microtech Metrology Measuring range: 0–300 mm Resolution: 0.01 mm Accuracy: ±0.04 mm Jaw length: 40 / 41.5 mm Display digit height: 11 mm Wireless data output Swiss Digit display IP67 protection ISO 17025 calibration certificate included FAQ Is the caliper delivered with a calibration certificate? The Digital Caliper from Microtech Metrology is supplied with an ISO 17025 calibration certificate confirming traceable calibration results (SKU 141130304). What measurement range and resolution does the instrument offer? The unit covers 0–300 mm and provides a display resolution of 0.01 mm, suitable for standard workshop and inspection tasks. Can the caliper be used in wet or dusty environments? Yes, the caliper has an IP67 rating which protects electronics against dust and temporary immersion, making it resilient in harsh shop conditions. How is measurement data transferred to systems? This model features wireless data output, enabling direct transfer of readings into data loggers or quality software to reduce manual entry. What is the stated accuracy for routine checks? The instrument has a stated accuracy of ±0.04 mm, appropriate for general machine‑shop quality control when combined with the included ISO 17025 calibration. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Digital Precision Caliper Swiss Digit Display 0.01mm Resolution IP67, ISO 17025 Calibrated - Microtech Metrology
Reliable, ISO 17025‑calibrated measuring and IP67 protection combine to deliver a robust workshop instrument with a flexible 0–300 mm range and clear digital readout. Order the calibrated unit directly from Metav Werkzeuge or contact our consultants for application advice. Digital Caliper by Microtech Metrology — IP67 protection, ISO 17025 calibration The Digital Caliper from Microtech Metrology is a rugged, shop‑ready measuring tool designed for inspection and everyday machining tasks with a 0–300 mm measuring range. ISO 17025 calibration certificate included IP67 dust‑ and water‑resistant construction Swiss Digit 11 mm clear digital display 0–300 mm measuring range for general use Precision and range tailored for workshop use This caliper offers a 0–300 mm measuring span that places it squarely in the standard category for machine shops and metalworking—balancing reach with rigidity for reliable single‑hand operation. The instrument’s resolution of 0.01 mm and a declared accuracy of ±0.04 mm provide repeatable results for production quality control and maintenance tasks. The 130/60 mm jaw geometry supports a variety of external and step measurements while maintaining stable contact, reducing measurement scatter and improving throughput for routine inspection sequences. Traceable calibration for confident inspection Delivered with an ISO 17025 calibration certificate, the caliper is prepared for use in calibrated inspection routines and formal quality systems. The traceable certificate confirms the measuring chain and simplifies documentation for incoming inspections, in‑process checks and final acceptance tests. Because the device is calibrated to an accredited standard, downtime for initial setup is minimised and measurement data can be entered into quality records with confidence. Built to endure the shop floor without compromising usability A sealed design rated IP67 defends internal electronics against dust and temporary immersion, making the caliper suitable for demanding environments where coolant splash or dusty conditions occur. The Swiss Digit 11 mm display ensures figures remain legible at a glance, supporting faster decisions on the bench and reducing operator fatigue. Durable construction and straightforward controls translate into fewer interruptions, improving operational efficiency across repetitive measurement tasks. Choose Microtech Metrology’s calibrated digital caliper for dependable, shop‑rated measurement and contact Metav Werkzeuge to confirm suitability or request delivery details Technical data Article number: 141740303 GTIN: 4061905457401 Manufacturer: Microtech Metrology Measuring range: 0–300 mm Resolution: 0.01 mm Accuracy: ±0.04 mm Display: Swiss Digit, height 11 mm Protection class: IP67 Jaw length: 130/60 ECLASS: 21170344 Digital: yes ISO 17025: calibration certificate included Facts SKU: 141740303 Ablesung: 0.01 Genauigkeit: 0.04 Messbereich_max_mm: 300 Special features Calibrated to ISO 17025 with certificate Robust, sealed electronics suitable for shop floors Clear digital readout for fast readings Standard‑range caliper fitting routine QC tasks Manufacturer listed: Microtech Metrology FAQ Is the caliper supplied with a calibration certificate? Yes. The Microtech Metrology digital caliper is delivered fully calibrated and includes an ISO 17025 calibration certificate for traceable measurements. What environments is the caliper suitable for? The unit’s IP67 rating protects the electronics from dust and temporary immersion, making it suitable for standard workshop and inspection environments where splash and contamination are present. What accuracy and resolution can be expected? The instrument provides a resolution of 0.01 mm and a specified accuracy of ±0.04 mm, appropriate for routine machine‑shop quality control and maintenance checks. How readable is the display under workshop lighting? The Swiss Digit display, with an 11 mm digit height, offers high legibility for quick readings on the bench or in low‑light conditions. Does the caliper cover inside and outside measurements? Yes. The Digital Caliper supports standard inside, outside, step and depth measurements common to workshop calipers. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Digital Precision Caliper Swiss Digital Display 11mm, IP67 - Microtech Metrology
The combination of a high-contrast Swiss Digital display, IP67 protection and a workshop-oriented 0–300 mm measuring range ensures dependable results for everyday metalworking tasks. Benefit from robust construction and low-maintenance jaws for consistent throughput on the shop floor. Order the instrument directly via Metav Werkzeuge or consult our advisors for specification support. Digital Caliper — 0–300 mm, Swiss Digital display (Microtech Metrology) The Digital Caliper is a rugged, workshop-ready measuring instrument designed for general machining and quality-control tasks across the metalworking trade. Swiss Digital 11 mm high-contrast display IP67 protection against dust and water 0.01 mm resolution with ±0.03 mm accuracy Self-lubricating jaws for long service life Dependable precision where it matters The caliper delivers a measuring range of 0–300 mm, placing it in the Standard class commonly used across machine shops and metal fabrication. With a resolution of 0.01 mm and an indicated accuracy of ±0.03 mm, the instrument provides measurement results that are both readable and repeatable for routine inspection and production control. The large 11 mm Swiss Digital display reduces read errors and speeds up checks, while the specified accuracy should be considered together with measuring technique and fixturing to guarantee the required tolerances. Built for tough workshop use and low upkeep Durability is emphasised by IP67 protection, which keeps dust and coolant sprays away from the electronics—an advantage in harsher environments. The jaws are self-lubricating, reducing the need for frequent maintenance and preserving sliding action over time. A jaw length of 43 mm supports reliable contact on small and medium components, improving stability during external and step measurements. These features combine to minimise downtime and rework, helping maintain smooth production cycles. Practical benefits for process reliability Integration into everyday workflows is straightforward: the robust display and clear graduations accelerate routine checks, and the instrument’s construction reduces handling-related measurement scatter. For procurement strategies that prioritise consistent quality, the caliper is a rational choice thanks to its balanced mix of practical accuracy, environmental protection and mechanical resilience. When combined with Metav’s supply chain reliability, this measuring tool supports repeatable inspection routines and dependable stock management. Speak to Metav Werkzeuge for tailored advice on Microtech Metrology digital calipers and to arrange supply directly from Emmerich. Technical Data Article number: 141430303 GTIN: 4061905037818 Manufacturer: Microtech Metrology ECLASS: 21170344 Display: Swiss Digital, height 11 mm Protection: IP 67 Digital: Yes Facts Measuring range: 0–300 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Jaw length: 43 mm Measuring force: none Special features Self-lubricating jaws High-contrast display Standard caliper class (0–300 mm) Robust, workshop-suitable design FAQ What measuring range and resolution does this caliper offer? The Microtech Metrology digital caliper covers 0–300 mm with a resolution of 0.01 mm; the stated accuracy is ±0.03 mm and it is sold under SKU 141430303. Is the instrument protected against dust and coolant? Yes, the device is rated IP67, providing protection against dust ingress and temporary immersion—suitable for many workshop conditions. How much maintenance do the jaws require? The jaws are self-lubricating, which reduces routine maintenance and helps preserve smooth sliding action during long production runs. Is the display suitable for quick readings in busy environments? The caliper features a Swiss Digital high-contrast display with 11 mm characters, optimised for fast and reliable readings on the shop floor. Which applications are best suited to this caliper? As a Standard-class caliper (0–300 mm), it is ideal for general machine building, metalworking and incoming goods inspection where a balance of reach, stiffness and one-handed handling is required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Digital Precision Caliper Three-Point Readout Swiss Digit 11mm, IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of a robust IP67 protection together with ISO 17025 traceable calibration and a clear Swiss Digit display to secure reproducible measurements in everyday workshop routines. The combination of a wide 0.01 mm resolution and a standard 300 mm range supports efficient quality checks and reduces rework. Order the digital caliper directly via Metav Werkzeuge or ask our consultants if additional specifications are required. Digital caliper by Microtech Metrology — IP67, ISO 17025-calibrated Digital caliper for reliable workshop measuring across a standard 300 mm range, designed for machine shops and quality control stations IP67 dust and water protection ISO 17025 calibration certificate included Swiss Digit 11 mm display for clear readings Measuring range up to 300 mm with 0.01 mm resolution Reliable performance for workshop measurement routines This instrument is built for repeatable results in everyday production and inspection tasks. The combination of a 0.01 mm resolution and a specified accuracy of 0.04 mm makes it suitable for routine checks where speed and comparability are important. With a measuring span that reaches 300 mm, the caliper covers the common workshop sizes classified as the standard range, offering an effective compromise between reach and stiffness. The clear numeric readout reduces interpretation errors and speeds up batch control. Traceable calibration and quality assurance Delivered fully ISO 17025-calibrated, the caliper arrives with a calibration certificate that documents traceability to recognised standards. This certificate supports internal quality procedures and audits by providing documented measurement uncertainty. The calibration status is particularly relevant for production control and incoming inspection tasks where documented traceability is required. The presence of an independent calibration report demonstrates the tool’s suitability for regulated environments and systematic quality assurance. Robust design and readable display for practical use Engineered for daily workshop conditions, the device features an IP67 rating, which protects against dust ingress and temporary immersion. The sealed electronics extend service life in harsher shops and simplify cleaning routines. The Swiss Digit display with an 11 mm character height ensures fast legibility even under poor lighting, reducing measurement time per part. Jaw lengths of 30/70 mm improve access to internal and external features, while dual upper and lower jaw ranges (9–300 mm and 17–300 mm respectively) allow flexible application across varied components. Integration into inspection routines and ergonomics Designed for efficient handling, the caliper’s form factor supports one-handed operation and fast repetitive measurements, helping to reduce cycle time during sampling. The digital readout and standardised measurement behaviour promote consistent entries into inspection logs and enable straightforward comparisons across shifts. As part of a Metav-equipped workshop, the instrument aligns with an ecosystem of calibrated tools, simplifying procurement and ensuring continuity of measurement quality across suppliers. Contact Metav Werkzeuge in Emmerich for tailored advice or to purchase the Microtech Metrology digital caliper (SKU 141220303) with ISO 17025 calibration certificate Technical data Article number: 141220303 GTIN: 4061905459597 Brand: Microtech Metrology Digital display: Swiss Digit, character height 11 mm IP rating: IP67 ISO 17025: Calibrated; calibration certificate included Numbers / Core technical data Resolution: 0.01 mm Stated accuracy: 0.04 mm Measuring range: 9–300 mm (top jaws), 17–300 mm (bottom jaws) Jaw lengths: 30 / 70 mm Special features Digital caliper (standard range) Robust, sealed electronics Clear numeric display for fast readings Delivered calibrated to ISO 17025 FAQ Is the caliper supplied with a calibration certificate? Yes. The Microtech Metrology digital caliper is delivered fully calibrated to ISO 17025 and includes the corresponding calibration certificate for traceability and audits. What protection does the caliper offer against coolant and dust? The caliper has an IP67 rating, providing dust-tight protection and resistance to temporary immersion, which helps in wet or contaminated workshop environments. Which measurement ranges are available on the jaws? The upper jaws cover 9–300 mm and the lower jaws cover 17–300 mm, enabling both internal and external measurements across the standard 300 mm span. How fine are the readings on the display? The instrument displays measurements at 0.01 mm resolution on a Swiss Digit screen with 11 mm-high digits for rapid, unambiguous reading. Is the accuracy suitable for production control? With a stated accuracy of 0.04 mm and ISO 17025 calibration, the caliper is appropriate for standard production control and incoming inspection tasks where documented traceability is required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Digital Precision Caliper Touchscreen, Wireless USB, IP54, ISO 17025 Calibrated - Microtech Metrology
Reliable shop‑grade measurement with built‑in connectivity and traceable calibration: the combination of ±0.03 mm accuracy, 0.005 mm resolution and Wireless & USB data output delivers reproducible results and faster inspection cycles — order directly via Metav Werkzeuge or ask our consultants for application support. Digital caliper — Microtech Metrology, 0–300 mm, Wireless & USB A digital caliper for machine shops and quality control, offering a 0–300 mm measuring range with a clear touchscreen readout and shop‑ready data transmission. Wireless & USB data output Touchscreen display for fast readings ISO 17025 calibration with certificate Accurate range and reproducible results for routine inspection The 0–300 mm measuring span places this instrument in the standard caliper class, combining reach with stiffness for everyday workshop use. With an indicated accuracy of ±0.03 mm and a display resolution of 0.005 mm, the instrument supports reliable dimensional checks across common components. The specified measurement characteristics make it suitable for machine and metal fabrication tasks where repeatability and concise tolerances matter, while the clear readout reduces the risk of transcription errors during manual logging. Fast data capture and process integration to save time Equipped with Wireless & USB interfaces and a touchscreen display, the device simplifies transfer of measurement data into inspection protocols and SPC software. Wireless transfer removes repetitive entry steps; USB provides a wired backup for secure logging. The integrated data output accelerates throughput in serial inspection routines and helps to maintain traceability, so measurement results are available for immediate analysis without manual re‑keying. Robust features for workshop conditions Designed for daily use, the caliper carries an IP54 protection rating to withstand dust and splash in a production environment and features jaw lengths of 130/60 mm that improve access to both outside and inside measuring positions. The specified measuring force range of 1–20 N supports consistent contact pressure, promoting reproducible readings across operators. The overall construction and protection level ensure that routine handling in a busy shop does not compromise performance. Delivered calibrated and ready for traceable quality assurance This instrument is supplied fully calibrated in accordance with ISO 17025, and a calibration certificate is included with delivery, providing documented traceability for quality systems and audits. The factory calibration, combined with the device’s connectivity and resolution, supports integration into established inspection processes and reduces the time between receipt and productive use. For tasks that require documented conformity and auditability, the digital caliper arrives ready for immediate deployment. Contact Metav Werkzeuge for tailored advice on application and integration — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 141740307 GTIN: 4061905457425 Brand: Microtech Metrology ECLASS: 21170344 Facts Measuring range: 0–300 mm Resolution (display): 0.005 mm Accuracy: ±0.03 mm Measuring force: 1–20 N Jaw length: 130/60 mm Protection class: IP54 Data output: Wireless & USB Special features Touchscreen display Digital caliper (standard class) ISO 17025 calibration with certificate Wireless and USB interfaces Suitable for machine and metal workshop inspection FAQ Is the caliper supplied with a calibration certificate? Yes. The digital caliper from Microtech Metrology (SKU 141740307) is delivered fully calibrated to ISO 17025 standards and includes the calibration certificate for traceability. How is measurement data exported from the instrument? Measurement values can be transmitted via Wireless or USB interfaces, allowing direct integration into inspection systems or local data capture solutions. What accuracy and resolution can be expected in standard use? The instrument specifies an accuracy of ±0.03 mm with a display resolution of 0.005 mm, suitable for routine quality control in workshops and production. Can the caliper be used in a production environment with coolant splash or dust? Yes. The caliper has an IP54 rating, providing protection against limited dust ingress and splashing water common in shop environments. Does the instrument support consistent measuring pressure? The specified measuring force range of 1–20 N helps to maintain contact consistency and minimise operator‑related variation during inspections. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Digital Precision Caliper Wireless Display 0.01mm Resolution IP67, ISO 17025 Calibrated - Microtech Metrology
Benefit from a workshop-grade instrument that combines wireless data transfer, robust IP67 protection and traceable calibration to ISO 17025 for reliable quality control. The calibrated unit with a clear Swiss Digit display and 0–300 mm range supports efficient inspection workflows — order via Metav Werkzeuge or consult our specialists for configuration advice. Microtech Digital Caliper — 0–300 mm, Wireless, IP67 The Digital Caliper from Microtech Metrology provides wireless data output and rugged IP67 protection for precise measurement tasks in machine shops and inspection benches. Wireless data output for seamless recording IP67 dust and water protection Calibrated to ISO 17025 with certificate 0–300 mm range with 0.01 mm resolution Precise workshop control with a standard measuring range The caliper’s 0–300 mm measuring range places it in the Standard category for everyday machine‑shop and metal‑working tasks, offering the best compromise between reach and rigidity. The instrument’s compact jaw geometry and 43 mm jaw length allow stable contact on typical parts while remaining manoeuvrable for routine checks. For workshop QC this means fewer set‑ups, faster part inspection and reproducible dimensional logging compared with ad‑hoc hand measurements. Readable, traceable results for quality systems A high‑contrast Swiss Digit 11 mm display and a resolution of 0.01 mm deliver clear readings at the bench, while the instrument’s stated accuracy of ±0.03 mm matches typical industrial expectations for a 0–300 mm digital caliper. Delivered fully calibrated to ISO 17025, the package includes a calibration certificate, enabling direct integration into inspection protocols and audit trails. This traceability reduces documentation work and supports compliance with internal and external quality standards. Robust handling and efficient data capture Rated IP67, the housing and slider resist dust ingress and short‑term immersion, making the caliper suitable for tougher workshop environments where coolants or swarf are present. The built‑in Wireless data interface simplifies transfer to data loggers or SPC systems, eliminating manual entry errors and speeding up documentation. Together, these features reduce rework and accelerate decision cycles in production monitoring or first‑article inspection. Practical benefits for everyday measurement tasks The instrument is optimised for quick repetition: a fast, legible display, cordless data transfer and a familiar single‑hand operation save cycle time during batch checks. As the tool is supplied fully calibrated to ISO 17025, it arrives ready for immediate use in accredited processes or internal quality checks. For buyers seeking a dependable measuring instrument that balances shop robustness with laboratory traceability, this digital caliper represents a practical upgrade over basic mechanical gauges. For traceable, workshop-ready measurement with wireless data output and ISO 17025 calibration, contact Metav Werkzeuge in Emmerich for expert advice and procurement of Microtech Metrology digital calipers Technical data Article number: 141430304 GTIN: 4061905459481 Manufacturer: Microtech Metrology SKU: 141430304 Data Measuring range: 0–300 mm Resolution (display): 0.01 mm Accuracy: ±0.03 mm Display height: 11 mm Jaw length: 43 mm Protection class: IP67 Special features Wireless data output Delivered calibrated to ISO 17025 with calibration certificate Swiss Digit display Standard category caliper for machine and metalwork No specified measuring force FAQ What is the measuring range of the instrument? The caliper covers a measuring range of 0–300 mm, making it a Standard category instrument suitable for general machine‑shop and quality‑control applications. What resolution and accuracy can be expected? The digital readout provides a resolution of 0.01 mm and an accuracy of ±0.03 mm, appropriate for routine inspection and workshop metrology. Is the caliper suitable for use in wet or dusty environments? Yes, the IP67 rating protects the device against dust ingress and short‑term immersion, allowing use in harsher shop conditions. Does the caliper support data capture for SPC or inspection systems? The instrument features wireless data output, enabling straightforward transfer of measured values to SPC software or data loggers. Is the caliper delivered with a calibration certificate? The caliper is supplied fully calibrated to ISO 17025 and includes a calibration certificate for traceability and audit purposes. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Digital Precision Caliper With 0.01mm Resolution, IP67, Rechargeable Lithium Battery, LCD Colour Display, Storage Case - Filetta
Take advantage of a tough, workshop-ready design combined with precise digital measurement and straightforward maintenance: the IP67 protection and rechargeable lithium power source ensure reliable use in challenging environments, while the ±0.03 mm accuracy and 0.01 mm display resolution deliver repeatable results for production and QA. Order the Filetta caliper directly via Metav Werkzeuge or consult our specialists for technical advice. Filetta MS910.473 Digital Caliper — IP67 protection, 300 mm range The Filetta MS910.473 digital caliper is a robust precision measuring instrument designed for everyday workshop and production use, offering a 0–300 mm measurement range with an easy‑to‑read colour display. IP67 waterproof and dustproof protection Rechargeable lithium battery for continuous use Colour LCD with day/night and tolerance modes High accuracy ±0.03 mm Reliable reach and practicality for general engineering This instrument sits in the Standard class of calipers, covering the common workshop span up to 300 mm and delivering the best balance between reach and rigidity for routine machining and assembly work. The solid jaw length and overall construction reduce flex during handling, which helps preserve measurement repeatability across medium-sized components. The design is suited to metalworking, toolrooms and general mechanical maintenance where one-handed operation and quick checks are part of the daily workflow. Precise digital readout for fast quality decisions Equipped with a colour LCD that supports day/night viewing and a built‑in tolerance function, the instrument reports dimensions in mm/inch and provides ABS/INC switching plus a reset key for zeroing in any position. The electronic display reads at 0.01 mm resolution while the specified accuracy is ±0.03 mm, which translates into dependable pass/fail decisions on the shop floor and fewer unnecessary reworks. The digital features speed up inspection sequences and minimise transcription errors compared with analogue methods. Durable build and ergonomic handling to speed tasks Protection to IP67 and a rechargeable lithium battery make the caliper resilient against coolant mists, dust and intermittent wet conditions often encountered in production environments. A fine‑feed thumb wheel (drive wheel) and a locking screw secure measurements during transfer, and an integrated depth gauge extends the tool’s utility beyond simple jaw measurements. These usability features reduce cycle times and improve operator comfort, supporting efficient throughput in repetitive inspection tasks. Contact Metav Werkzeuge for tailored procurement advice on the Filetta MS910.473 IP67 digital caliper — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: MS910.473 Manufacturer: Filetta Product type: Digital caliper Measurement range: 0–300 mm IP protection: IP 67 Display type: Colour LCD with day/night and tolerance function Numbers / Core technical data Resolution: 0.01 mm Accuracy: ±0.03 mm Jaw length: 60 mm Measurement range (max): 300 mm Special features mm/inch, On/Off, ABS/INC and Reset buttons Depth measurement function Thumb wheel fine adjustment (drive wheel) Locking screw for secure readings Rechargeable lithium battery FAQ Is this caliper suitable for use in a workshop environment? Yes. The Filetta MS910.473 digital caliper is designed for workshop and production conditions, with IP67 protection and a robust mechanical layout suitable for routine metalworking checks. What measurement accuracy and resolution does the instrument offer? The instrument provides a display resolution of 0.01 mm and an accuracy of ±0.03 mm, which is adequate for standard workshop quality control tasks with the Filetta MS910.473. Can the caliper measure depth and internal dimensions? Yes. The tool includes a depth measurement blade and standard jaw geometry for internal and external measurements, enabling a full range of common caliper tasks with the Filetta MS910.473. How is the display configured and what functions are available? The colour LCD supports day/night visibility and a tolerance mode; the unit offers mm/inch switching, ABS/INC operation and a reset key to zero the display at any point. What powers the caliper and how is it recharged? The caliper uses a rechargeable lithium battery, allowing extended use between charges and eliminating frequent disposable battery changes in production settings. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
300mm Digital Precision Caliper With Offset Jaws, 0.01mm Readout, IP54, ISO 17025 Calibrated - Microtech Metrology
Take advantage of a workshop-ready measuring tool that combines ISO 17025 calibration, robust IP54 protection and reliable USB data transfer for seamless inspection workflows; order the precision instrument directly via Metav Werkzeuge or consult our technical advisors for application guidance. Precision caliper (digital) by Microtech Metrology — 0–300 mm, USB data output A Precision caliper (digital) designed for standard workshop and quality-control tasks, offering traceable calibration and rugged everyday use across machining and inspection environments. Robust IP54 protection against dust and splash Delivered with ISO 17025 calibration certificate USB data output for direct measurement transfer High-contrast 13 mm digital display for easy reading Reliable accuracy and traceability for quality control A measuring solution that brings measurable benefits to production control: the digital caliper offers a measuring range of 0–300 mm, a display resolution of 0.01 mm and an indicated accuracy of 0.04 mm, making it suitable for standard machining and assembly inspections. The tool is supplied with a full ISO 17025 calibration certificate, which documents traceable measurement uncertainty and supports quality records. This combination reduces rework and speeds up acceptance testing by providing verifiable readings that integrate into existing QA processes. Built to handle workshop conditions without compromise Engineered for everyday industrial use, the instrument features IP54 ingress protection and a reinforced jaw geometry (130/60 mm jaw length) that balances reach with stiffness. The rated protection keeps the electronics safe from coolant mist and fine dust, extending service life and reducing unplanned downtime. The robust digital readout and solid slider mechanics ensure repeatable measurements on components, jigs and fixtures commonly found in metalworking and maintenance shops. Efficient data capture for inspection and documentation Integrated USB data output enables direct transfer of measurements into spreadsheets or inspection software, accelerating data logging and eliminating manual transcription errors. The 13 mm high-contrast display delivers legible digits at a glance, while the standard resolution of 0.01 mm supports routine shop-floor precision. For customers needing documented traceability, the included ISO 17025 certificate and digital export capability create a straightforward path from measurement to quality record. Practical handling and operator benefits Ergonomic slider control and clear visual feedback reduce operator variability and make one-handed measuring duties more reliable. With a practical jaw design and balanced weight distribution, the caliper is easy to position on both workbench and portable inspection tasks. The instrument is classified in the workshop “Standard” size range, providing an optimal balance between reach and stiffness for general-purpose use across machining, fabrication and maintenance operations. Secure traceable measurements with Microtech Metrology’s precision caliper — contact Metav Werkzeuge for tailored advice and delivery from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141740300 GTIN: 4061905457388 Manufacturer: Microtech Metrology Facts Measuring range: 0–300 mm Resolution (display): 0.01 mm Indicated accuracy: 0.04 mm Display height: 13 mm Jaw length: 130/60 mm Protection rating: IP54 Special features Digital display (13 mm) USB data output Supplied calibrated to ISO 17025 with certificate Standard workshop classification (0–300 mm) Robust slider and reinforced jaws FAQ What measuring range does this caliper cover? The digital caliper covers a measuring range of 0–300 mm, making it a standard workshop instrument suitable for most machining and assembly tasks. Is the instrument delivered calibrated? Yes, the caliper is delivered fully calibrated to ISO 17025 and includes a calibration certificate for traceable quality documentation. How accurate is the digital readout? The instrument provides a display resolution of 0.01 mm with an indicated accuracy of 0.04 mm, appropriate for general industrial inspection. Can measurement data be exported electronically? Measurement values can be transferred directly via the USB data output for efficient logging and integration into inspection workflows. Is the caliper suitable for harsher environments? The tool is rated IP54, offering protection against dust ingress and splashing liquids, which supports durability in typical workshop conditions. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Digital Precision Caliper With Offset Jaws, Swiss Digit Display 11mm, Wireless, IP67, ISO 17025 Calibrated - Microtech Metrology
The robust combination of wireless data transfer, IP67 protection and an ISO 17025 calibration certificate ensures reliable, traceable measurements for everyday workshop use; order the device via Metav Werkzeuge or consult Metav’s specialists for tailored advice. Digital Caliper by Microtech Metrology — Wireless, IP67 protection The Digital Caliper delivers workshop-ready, wireless measurement for standard 0–300 mm tasks, combining a clear 11 mm Swiss Digit display with laboratory-grade calibration. Wireless data output for integration IP67 dust and water protection Supplied with ISO 17025 calibration 11 mm Swiss Digit high-contrast display Precision and traceability for quality control This measuring instrument pairs a 0–300 mm measuring range with a practical resolution of 0.01 mm and an indicated accuracy of ±0.04 mm, making it suitable for general engineering and routine quality checks. The tool is classified as a standard length caliper, which strikes the best balance between reach and rigidity for workshop tasks such as component inspection, fixture setting and production sampling. Because the device is delivered with an ISO 17025 calibration certificate, results are traceable and acceptable for audits and internal quality procedures. Reliable measurement in harsh environments Rated IP67, the caliper sustains exposure to dust and temporary immersion, reducing downtime and maintenance in busy shops. Wireless data output allows direct transfer to data-loggers or quality software, cutting transcription errors and speeding up documentation. The Swiss Digit 11 mm display ensures readings remain legible under workshop lighting, while the digitised interface simplifies intermittent checks during machine setups — an efficiency gain that translates to fewer stoppages and more consistent throughput. Ergonomics and integration for daily use Engineered for one-handed operation, the instrument’s slide and locking mechanism support repeatable positioning, while the wireless interface supports downstream measurement systems and SPC workflows. The compact display and tactile control mean rapid sampling without sacrificing stability. For procurement teams the clear technical profile and included ISO 17025 certificate reduce validation effort when integrating the tool into existing metrology chains, supporting faster machine acceptance and process validation. Contact Metav Werkzeuge today to discuss Microtech Metrology digital calipers and secure an ISO 17025 calibrated instrument for immediate use in production and inspection. Technical data SKU: 141740304 GTIN: 4061905457760 Manufacturer: Microtech Metrology Data Measurement range: 0–300 mm Resolution: 0.01 mm Indicated accuracy: ±0.04 mm Display height: 11 mm Features IP67 protection Wireless data output Digital display (Swiss Digit) Delivered with ISO 17025 calibration certificate FAQ What measurement range does this caliper cover? The Digital Caliper covers a measuring range of 0–300 mm and is classified as a standard-length caliper suitable for workshop and machine‑shop use. Is the instrument calibrated on delivery? Yes, the Microtech Metrology Digital Caliper is supplied fully calibrated with an ISO 17025 calibration certificate for traceable results. Can measurement data be exported directly to software? Wireless data output enables direct transfer of readings into data acquisition systems and SPC software for streamlined documentation. How resistant is the caliper to workshop conditions? The instrument is rated IP67, offering dust-tight protection and resistance to temporary immersion, which increases reliability in demanding environments. Which display format and visibility can be expected? The caliper uses a Swiss Digit display with an 11 mm digit height, providing clear, high-contrast readings ideal for fast, repeatable checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Digital Precision Caliper With Preset, Stainless Hardened, Removable Measuring Inserts, Supplied In Case - Metav IndustryLine
Take advantage of a compact, workshop-ready measuring instrument that combines a 300 mm measuring range, 0.01 mm resolution and a robust stainless‑steel build for reliable everyday inspection; order directly via Metav Werkzeuge or consult our specialists for application advice. Digital Uni Caliper M240.202.N — 300 mm stainless steel caliper with preset A Digital Uni Caliper M240.202.N for versatile interior, exterior, tube wall and bore‑spacing measurements in routine machine shop and quality‑control tasks 300 mm measuring range, workshop standard 0.01 mm resolution for precise readings Preset function with ON/OFF and SET buttons Hardened stainless steel with metal housing Consistent accuracy for production and inspection The caliper delivers reproducible measurements thanks to a finely tuned digital system with 0.01 mm resolution, making it suitable for standard workshop quality‑control where repeatability is required. The fixed 300 mm measuring range places it in the standard class for machine and metalworking, offering an optimal balance between reach and stiffness. The preset feature (SET/PRESET and ON/OFF) speeds up repetitive tasks by allowing a known reference to be stored, reducing cycle time during batch inspections. Practical handling and versatile measuring modes Designed for everyday use, the instrument supports interior, exterior, step and tube‑wall measurements with measuring inserts that can be mounted either on the top or bottom, increasing accessibility in confined spaces. The metal housing protects the electronics while the hardened stainless‑steel frame resists wear and keeps jaw geometry stable. A jaw length of 20 mm helps engage small features without losing stability, and the clear digital display with simple controls reduces reading errors and operator fatigue. Robust supply and workshop readiness Delivered in a practical transport case, the caliper arrives protected and ready for immediate use at the bench. The solid construction and metal casing make it suitable for industrial environments where tools are handled often; the compact form and weight (approx. 1.4 kg) make handling straightforward while preserving the stiffness needed for reproducible results. The data output interface RB 5 is provided for integration into data capture systems where traceable records are required. Efficiency and confidence in daily workflows As a digital measuring instrument built to a factory standard, it supports efficient inspection routines: the preset function reduces setup time, the robust stainless assembly reduces maintenance, and the instrument’s resolution keeps measurement uncertainty low for standard quality checks. For operations that demand consistent throughput, this caliper contributes to shorter inspection cycles and clearer pass/fail decisions. Contact Metav Werkzeuge today to specify measurement requirements and secure the Metav IndustryLine 300 mm stainless digital caliper with preset for workshop‑grade precision and reliable integration into quality processes Technical data Article number: M240.202.N GTIN: 4054469159980 EClass: 21170344 Facts Measuring range: 0–300 mm Resolution: 0.01 mm Weight: 1.4 kg Jaw length: 20 mm Tariff number: 90173000 Special features Material: hardened stainless steel with metal housing Preset function; ON/OFF and SET/PRESET buttons Measuring inserts mountable top or bottom Supplied in transport case for protection during transport Data output: RB 5 Digital display caliper; factory standard FAQ What measuring tasks is this caliper best suited for? This Digital Uni Caliper M240.202.N is aimed at standard machine‑shop and metalworking tasks, covering interior, exterior, step and tube‑wall measurements across a 0–300 mm range. What level of precision can be expected from the instrument? The caliper offers a 0.01 mm resolution, making it suitable for routine quality control and workshop inspection where DIN‑style digital accuracy is required. Is the caliper ready for immediate use upon delivery? Yes. The instrument is supplied in a transport case and includes the digital display with preset capability; additional calibration certificates are provided only if specified by order. Can measurement data be exported for documentation? Data output is available via the RB 5 interface, allowing connection to compatible data‑collection systems for traceable records. What material is the caliper made from and how durable is it? The frame and jaws are made from hardened stainless steel with a metal housing for increased resistance to wear and harsh workshop conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digitaler Messschieber, 0,01mm Auflösung, IP 67, ISO 17025 kalibriert - Microtech Metrology
Kompakte, geprüfte Präzision: Der Messschieber vereint Auflösung 0,01 mm, ISO 17025‑Kalibrierung und IP67‑Schutz zu einem messbereiten Werkzeug für Werkstatt und Prüffeld. Die Kombination aus verlässlicher Kalibrierung, robuster Dichtung und digitaler Anzeige gewährleistet reproduzierbare Messergebnisse. Bestellen Sie den Messschieber direkt über Metav Werkzeuge oder kontaktieren Sie unsere Beratung bei technischen Fragen. Messschieber von Microtech Metrology (digitaler Messschieber, 0–300 mm) Der Messschieber ist ein digitaler Präzisionsschieber für Werkstatt‑ und Qualitätskontrollen bis 300 mm mit großer Swiss Digit Anzeige zur schnellen Ablesung. Messbereich bis 300 mm für Maschinenbau und Werkstatt Auflösung 0,01 mm für feine Messungen Swiss Digit Anzeige mit 11 mm Ziffernhöhe IP67 Schutz für staub‑ und wassergeschützten Einsatz Kalibriert ausgeliefert mit ISO 17025‑Zertifikat Geprüfte Messgenauigkeit für reproduzierbare Ergebnisse Die ISO 17025‑Kalibrierung sorgt dafür, dass Messergebnisse rückführbar und dokumentiert sind. Mit einer Auflösung von 0,01 mm lässt sich die Anzeige fein ablesen; die angegebene Genauigkeit von 0,04 mm beschreibt die typische Fehlergrenze dieses Modells im Werkstattalltag. Für Betriebe, die Prüfprozesse standardisieren wollen, bietet die geprüfte Auslieferung mit Kalibrierzeugnis klare Nachweisbarkeit gegenüber internen und externen Prüfprotokollen. Robustheit und Schutz für den rauen Arbeitsalltag Die Schutzart IP67 ermöglicht Messungen selbst in staubiger Umgebung oder bei kurzzeitigem Kontakt mit Wasser, ohne dass die Elektronik beeinträchtigt wird. Durch die digitale Anzeige mit 11 mm Ziffernhöhe werden Messwerte schneller erfasst, was die Prozesszeit in der Fertigung reduziert. Die Ausführung richtet sich an Anwender, die neben Präzision auch eine belastbare Einsatzfähigkeit unter wechselnden Bedingungen erwarten. Universelle Einsetzbarkeit in Werkstatt und Prüffeld Als Vertreter der Standard‑Klasse deckt der Schieber den typischen Bereich für Maschinen‑ und Metallbau ab. Typische Einsatzgebiete sind Maßkontrollen an Bauteilen, Einbau‑ und Montageprüfungen sowie Stichproben in der Fertigung. Anwender aus Maschinenbau, Werkstatt und Qualitätssicherung profitieren von der Kombination aus Reichweite, Handhabung und digitaler Ablesbarkeit für effiziente Routineprüfungen. Vorteile der digitalen Anzeige und Praxisnutzen Die Swiss Digit Anzeige verbessert die Bedienergeschwindigkeit und senkt Ablesefehler gegenüber mechanischem Nonius; die digitale Technik unterstützt schnelle Dokumentation und reduziert Nacharbeitsaufwand. Die gelieferte Kalibrierung nach ISO 17025 reduziert den internen Aufwand für Erstprüfungen und sorgt dafür, dass das Werkzeug sofort in normkonformen Abläufen eingesetzt werden kann. Metav Werkzeuge empfiehlt den kalibrierten Messschieber von Microtech Metrology wegen der geprüften Messverläßlichkeit und des IP67‑Schutzes für alle Prüfstellen, die belastbare, reproduzierbare Messergebnisse benötigen — technische Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Artikelnummer: 141650303 Marke: Microtech Metrology Bezeichnung: Messschieber mit 4 auswechselbaren Spitzen GTIN: 4061905451454 Daten Messbereich: 0–300 mm Ablesung: 0,01 mm Genauigkeit: 0,04 mm Besonderheiten IP Schutz: IP 67 (Staub‑ und Wasserschutz) Digitalanzeige: Swiss Digit, Ziffernhöhe 11 mm ISO 17025 Kalibrierung: vollständig kalibriert ausgeliefert; Kalibrierzeugnis eClass: 21170344 Digitale Ausführung FAQ Welche Messbereiche deckt der Schieber ab? Der Messschieber von Microtech Metrology (Artikelnummer 141650303) deckt einen Messbereich von 0–300 mm ab und gehört damit zur Standard‑Klasse für Maschinen‑ und Metallbau. Wie genau ist die Messung mit diesem Messschieber? Die Ausführung bietet eine Ablesung von 0,01 mm und eine praktische Genauigkeit von etwa 0,04 mm, was für viele Fertigungs‑ und Prüfaufgaben ausreichende Präzision liefert. Wird das Werkzeug kalibriert geliefert? Ja, der Messschieber wird vollständig kalibriert ausgeliefert; die Kalibrierung erfolgte nach ISO 17025 und ein entsprechendes Kalibrierzeugnis liegt bei. Was bedeutet IP67 bei diesem Messschieber? IP67 bezeichnet den Schutz gegen Eindringen von Staub und gegen zeitweiliges Untertauchen in Wasser, was den Einsatz in rauen Werkstattumgebungen erleichtert. Wie ist die Anzeige ausgeführt und wie gut ist die Ablesbarkeit? Die Anzeige arbeitet mit einer Swiss Digit Anzeige und einer Ziffernhöhe von 11 mm, was die Ablesung von Messwerten beschleunigt und Ablesefehler reduziert. Hersteller: Microtech, Nizhneyurkovska str. 45a; 04080 Kyiv; Ukraine; tool@microtech.tools
300mm Digitaler Messschieber, 0,01mm Auflösung, IP 67, ISO 17025 kalibriert, ABS Messsystem, lange Backe 100mm - Microtech Metrology
Die Kombination aus hoher Messgenauigkeit, robuster Schutzklasse und ausgeliefertem Kalibrierzeugnis sorgt für verlässliche Messdaten und weniger Nacharbeit in der Fertigung. Profitieren Sie von der digitalen Ablesung mit feiner Auflösung und der Schutzklasse gegen Staub und Spritzwasser; bei Bedarf steht die Beratung durch Metav Werkzeuge zur Verfügung. Messschieber Digital von Microtech Metrology Der Messschieber ist ein digitaler Präzisionsschieber für industrielle Messaufgaben bis 300 mm und eignet sich für Qualitätskontrolle und Werkstattmessungen. Digitale Ablesung 0,01 mm Präzision ±0,03 mm für Standardkontrollen Robust dank IP 67 Schutzklasse Swiss electric Display mit 11 mm Ziffernhöhe Lange Messschnabel-Spitze für tiefe Innenmessungen Präzise Messwerte für routinemäßige Qualitätskontrollen Die 0,01 mm Ablesung ermöglicht schnelle und eindeutige Messergebnisse, während die Genauigkeit von ±0,03 mm den Anforderungen im Maschinenbau und in der Werkstattindustrie entspricht. Das ABS Messsystem bietet den Vorteil stabiler Referenzen ohne Nullverlust beim Batteriewechsel, wodurch Messabläufe effizient bleiben. Anwender profitieren von klaren Ziffern auf dem Swiss electric Display, das auch in weniger optimal beleuchteten Arbeitsumgebungen gut ablesbar ist. Schutz und Mechanik für den rauen Werkstattalltag Der Messschieber wurde mit einem Querschnitt von 17x5 mm und einer Schnabellänge von 100 mm konstruiert, um sowohl Stabilität als auch Reichweite zu gewährleisten. Die Schutzart IP 67 sorgt dafür, dass Staubdichtigkeit und kurzzeitiges Untertauchen die Funktion nicht beeinträchtigen; das reduziert Ausfallzeiten durch Verschleiß oder Umwelteinflüsse. Durch die robuste Ausführung eignen sich die Komponenten besonders für den täglichen Einsatz in Fertigung und Montage. Einsatzbereiche, Kalibrierung und Anwenderkomfort Als Standardausführung mit einem Messbereich bis 300 mm deckt das Gerät typische Werkstattaufgaben und Prüfvorgänge in der Serienfertigung ab. Die Auslieferung erfolgt vollständig kalibriert; ein Kalibrierzeugnis nach ISO 17025 wird mitgeliefert und schafft direkte Nachweisbarkeit für interne und externe Prüfprozesse. Die einfache Bedienung und die digitale Anzeige reduzieren Messfehler und beschleunigen Prüfzyklen, was zu messbarer Effizienzsteigerung in Prüflaboren führt. Nutzen Sie die Präzision von Microtech Metrology: Fordern Sie Ihr Kalibrierzeugnis an und bestellen Sie den Messschieber über Metav Werkzeuge; Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 verfügbar. Produktmerkmale Artikelnummer: 141072311 Marke: Microtech Metrology Bezeichnung: Messschieber Messsystem: ABS Digital Anzeige: Swiss electric Digit Höhe 11mm GTIN: 4061905454837 Fakten Genauigkeit: 0,03 mm Ablesung: 0,01 mm Messbereich: 0-300 mm Messbereich Maximal: 300 mm Messbereich Minimal: 0 mm Schnabellänge: 100 mm Querschnitt: 17x5 mm Besonderheiten IP 67: Staub- und wassergeschütztes Gehäuse für rauen Einsatz ISO 17025 Kalibrierung: Kalibrierzeugnis wird mitgeliefert Digital: Elektronische Anzeige zur schnellen und exakten Ablesung ABS: Absolutes Messsystem, zuverlässige Referenz beim Batteriewechsel FAQ Wie genau ist die Messung mit dem Messschieber? Der Messschieber von Microtech Metrology liefert eine Ablesung von 0,01 mm bei einer Genauigkeit von ±0,03 mm und ist damit für Standardprüfungen im Maschinenbau geeignet. Wird der Messschieber kalibriert geliefert? Ja, der Messschieber wird vollständig kalibriert ausgeliefert; das Kalibrierzeugnis nach ISO 17025 liegt dem Gerät bei. Ist das Display auch in schattigen Arbeitsbereichen gut ablesbar? Das Swiss electric Display mit 11 mm Ziffernhöhe sorgt für gute Lesbarkeit auch bei eingeschränkter Beleuchtung; damit lassen sich Messwerte schnell und zuverlässig dokumentieren. Für welche Anwendungen eignet sich der Messschieber am besten? Der Messbereich bis 300 mm macht den Messschieber ideal für Werkstattmessungen, Prüfstände in der Serienfertigung und Qualitätskontrollen im Metallbau. Welche Schutzklasse hat das Gerät und was bedeutet das für den Einsatz? Mit der Schutzart IP 67 ist das Gerät staubdicht und kurzfristig wasserdicht, wodurch es für anspruchsvolle Umgebungen in Produktion und Montage geeignet ist. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Digitaler Universal-Messschieber, 0,001mm, IP54, Force Control, Kalibriert nach ISO 17025 - Microtech Metrology
Nutzen Sie die Kombination aus hoher Auflösung, drahtloser Datenübertragung und ISO‑17025‑Kalibrierung für verlässliche Serienmessungen. Bestellen Sie den Universal-Messschieber direkt über Metav Werkzeuge oder fragen Sie unsere Beratung an. Universal-Messschieber von Microtech Metrology Der Universal-Messschieber ist ein digitaler Präzisionsschieber mit 0,001 mm Auflösung und Wireless+USB Datenausgang, ideal für Fertigung, Qualitätssicherung und Werkstattmessungen. ISO 17025 Kalibrierzeugnis inklusive Auflösung 0,001 mm für Hochpräzision Color 1.5" Touchscreen für einfache Anzeige Wireless+USB Datenausgang für Industrie 4.0 IP 54 Schutz für Werkstattumgebung Präzision für wiederholbare Produktionsmessungen Die messbare Auflösung von 0,001 mm macht den Messschieber zur Wahl, wenn enge Toleranzen eingehalten werden müssen. In Kombination mit der werkseitigen ISO 17025 Kalibrierung wird die Messunsicherheit dokumentiert und die Rückverfolgbarkeit gewährleistet, was Audit‑ und Lieferantenanforderungen erleichtert. Das geringe Gewicht des Schiebers sorgt für einfache Handhabung bei Serienmessungen, sodass Messzyklen effizient bleiben. Effizienter Datenfluss direkt ins Messprotokoll Der integrierte Wireless+USB Datenausgang ermöglicht das schnelle Übertragen von Messwerten in Prüfsoftware oder Tabellen, wodurch manuelle Übertragungsfehler reduziert werden. Das Color 1.5" Touchscreen erleichtert das Ablesen und Menüführen direkt am Gerät, was Einarbeitungszeiten verkürzt und Messabläufe beschleunigt. So lassen sich Messdaten in der Fertigung unmittelbar verarbeiten und Qualitätssicherungsprozesse optimieren. Robustheit und Eignung für den Werkstatteinsatz Als Standard-Messschieber mit einem Messbereich bis 300 mm bietet das Gerät das bewährte Verhältnis aus Reichweite und Steifigkeit, das in Werkstätten und im Maschinenbau gefragt ist. Der IP 54 Schutz hält Spritzwasser und Staub fern und sichert verlässliche Messergebnisse auch unter rauen Bedingungen. Die messbare Messkraftspanne von 1–20 N unterstützt reproduzierbare Anpressbedingungen bei empfindlichen Bauteilen. Zubehör, Anwendung und Zielgruppe Lieferumfang und Ausstattung berücksichtigen den Montage‑ und Produktionsalltag: Das Set enthält Aufsatzbacken in drei Paaren, die das Messen von Profilen und schwer zugänglichen Flächen erleichtern. Entwickelt für Qualitätsprüfer, Fertigungsleiter und Werkzeugmacher, eignet sich das Gerät für Serienmessungen, Stichprobenprüfungen und dokumentierte Prüfprotokolle in der Werkstatt und am Prüfplatz. Empfehlung: Metav Werkzeuge empfiehlt den Einsatz des Microtech Metrology Universal‑Messschiebers für präzise Prozesskontrolle und dokumentierte Kalibrierbarkeit; bei Fragen steht der Metav Kundenservice zur Verfügung – eMail info@metav-werkzeuge.com, Telefon +49 2822 7131930, WhatsApp +49 170 2837271 Produktmerkmale Artikelnummer: 141630308 GTIN: 4061905036613 Marke: Microtech Metrology Bezeichnung: Universal-Messschieber Messbereich: 0–300 mm Fakten Auflösung: 0,001 mm Messbereich Maximal: 300 mm Messkraft: 1–20 N Besonderheiten Display: Color 1.5" Touchscreen Datenausgang: Wireless+USB Zubehör: mit 3 Paar Aufsatzbacken ISO 17025 Kalibrierung: Kalibrierzeugnis liegt bei IP 54: Schutz gegen Spritzwasser und begrenzte Staubeinwirkung FAQ Wie genau ist die Messanzeige des Messschiebers? Die Anzeige bietet eine Auflösung von 0,001 mm; zusammen mit der ISO 17025 Kalibrierung des Microtech Metrology Universal‑Messschiebers lassen sich Messergebnisse mit dokumentierter Rückverfolgbarkeit erzielen. Ist eine Kalibrierung im Lieferumfang enthalten? Ja, der Universal‑Messschieber wird mit einem Kalibrierzeugnis nach ISO 17025 ausgeliefert, sodass das Gerät sofort für qualitätsrelevante Prüfungen einsetzbar ist. Wie werden Messdaten übertragen? Der Microtech Metrology Universal‑Messschieber verfügt über einen Wireless+USB Datenausgang, der das direkte Übertragen von Messwerten in Prüfsoftware oder Datenerfassungs‑Systeme ermöglicht. Für welche Einsatzbereiche eignet sich der Messschieber? Der Messbereich bis 300 mm klassifiziert das Gerät als Standard‑Messschieber, ideal für Maschinenbau, Werkzeugbau und Qualitätssicherung bei Serien‑ und Stichprobenmessungen. Welche Schutzart und Umgebungsbedingungen sind möglich? Mit IP 54 ist der Messschieber gegen Spritzwasser und begrenzte Staubeinwirkung geschützt und damit für die meisten Werkstattbedingungen geeignet. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Precision where standard calipers reach their limits
Specialised calipers (also available as specialist calipers and precision calipers) are engineered for measurements that conventional calipers cannot perform reliably. With custom‑shaped jaws, extended measuring ranges and advanced materials, these tools deliver reproducible results down to the micrometre range, making them indispensable for difficult‑to‑access features such as fine grooves, deep bores and complex contours.
How these calipers tackle demanding measurement tasks
Specialised calipers work by adapting jaw geometry and sensing technology to the application: pointed, blade‑shaped, round or offset jaws capture inside and outside dimensions in confined geometries, while digital, analogue and inductive sensing cover different shop and lab requirements. Digital variants offer quick readouts and data transfer via Bluetooth/USB; analogue models remain reliable in humid or rough workshop environments; inductive versions provide extreme accuracy of ±0.001 mm (1 μm), suited to inspection rooms and laboratories. Wear‑resistant materials such as carbide or ceramic tips withstand coolants, abrasion and corrosion for sustained accuracy.
Measurable benefits for production and inspection
- Faster, repeatable measurements in constrained geometries, reducing inspection time.
- Reproducible results to the micrometre range, raising process reliability.
- Longer service life thanks to carbide or ceramic tips, lowering tool replacement frequency.
- Seamless data integration: digital specialised calipers can feed results directly into CAQ systems via Bluetooth/USB, supporting inline quality control.
- Robust performance across environments—from workshop floors to clean labs—thanks to analogue and inductive options.
Metav as a dependable partner for precision measurement
Metav combines decades of expertise with a comprehensive selection for industry, craft and trade. From Emmerich, Metav operates as a quality filter for the European market, supplying high‑precision tools across more than 250,000 product lines. Trusted by over 48,000 customers, Metav makes high accuracy accessible to every workshop while ensuring reliable fulfilment and consistent product quality.
FAQ
What accuracy can I expect from specialised calipers?
Inductive specialised calipers achieve extreme accuracy of ±0.001 mm (1 μm); digital models enable quick readout and transfer, while analogue versions provide reliable shop‑floor stability.
Which jaw shapes are available and what are they best for?
Specialised calipers come with pointed, blade‑shaped, round and offset jaws designed to measure features such as wall thickness of glass ampoules, gear tooth profiles and O‑ring grooves that standard calipers cannot access.
Can specialised calipers be used for inline quality control?
Yes. Digital specialised calipers with Bluetooth/USB support direct data transfer to CAQ systems, enabling inline testing and automated documentation in series production.
Are there variants suited to harsh workshop environments?
Analogue specialised calipers are less sensitive to moisture and rough handling, and units fitted with carbide or ceramic tips resist coolants, abrasion and corrosion for durable, accurate performance.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com