Precision specialist calipers for inaccessible measurements
Specialist calipers are engineered to measure fine grooves, deep bores and complex contours with reproducible accuracy down to the micrometre, delivering reliable results where standard calipers reach their limits. Designed with customised jaw shapes and robust materials such as carbide or ceramic tips, these calipers excel in measuring thin-walled aerospace structures, medical implants and intricate toolroom cavities while resisting coolants and abrasion. Available as digital, analogue and inductive variants, they offer options from quick-read displays and data transfer to extreme accuracy of ±0.001 mm for laboratory use. By combining tailored jaw geometries with durable construction, these precision tools improve inline quality control and support both prototype and series production.
13mm Internal Groove Measuring Insert For Caliper Adapter 1.2mm Width - Metav IndustryLine
Take precision where space is restricted: the combination of compact design, a secure Ø5 mm shank interface and defined groove geometry allows reliable, repeatable internal-groove checks from 40 mm. Benefit from a lightweight 70 mm probe that minimises operator fatigue and keeps set-up fast. Order the internal-groove measuring insert directly via Metav Werkzeuge or ask our consultants if needed. Internal groove measuring insert M240.326 — caliper adapter probe, 1.2 mm width (Metav IndustryLine) The Internal groove measuring insert M240.326 is a specialist measuring tip for use with caliper adapters, engineered to inspect internal grooves from 40 mm with a maximum depth of 13 mm and a nominal groove width of 1.2 mm. For internal grooves from 40 mm Max groove depth 13 mm Groove width 1.2 mm Ø5 mm shank for adapter Lightweight 50 g Accurate groove measurement where space is limited The insert converts a standard caliper into a dedicated groove probe, allowing precise checks of recesses without the need for larger, more complex fixtures. With a defined groove width 1.2 mm and a max groove depth 13 mm, the tip delivers repeatable contact geometry that reduces measurement scatter and improves comparability between readings. The geometry is optimised to sit securely in the groove flank so that a single, controlled contact produces a verifiable reading rather than a variable result caused by inconsistent probing angles. Secure mounting and repeatable handling for fast inspection cycles A Ø5 mm shank ensures a tight, wobble‑free connection to compatible caliper adapters, while the 70 mm length gives enough reach for most assemblies without sacrificing stiffness. The low weight (0.05 kg) makes handling light and reduces the effect of operator force during manual measurement. Together these attributes support short set‑up times and repeatable positioning, which is particularly valuable for batch inspections and spot checks on the production line. Practical use cases and workshop advantages Designed as an accessory for inspection and quality control, the probe is suitable for groove verification in components and assemblies where access is restricted. The compact measuring tip is ideal for checking grooves in housings, bearing seats and small machined components. As an accessory class product within the metrology toolkit, it complements standard calipers and adapters to extend measuring capability without the need for dedicated groove gauges, helping to keep the tool inventory efficient and adaptable. Contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to confirm adapter compatibility and arrange supply of the M240.326 internal groove insert Technical data Article number: M240.326 GTIN: 4054469159584 Category: Accessories Tariff number: 90178090 Core measurements Length: 70 mm Weight: 0.05 kg Shank diameter: Ø5 mm Max groove depth: 13 mm Groove width: 1.2 mm Special features For internal grooves from 40 mm Intended for use with caliper adapters Analog accessory for manual inspection Lightweight probe for reduced handling fatigue FAQ What groove dimensions can this insert measure? The insert is designed for internal grooves from 40 mm in diameter, with a maximum depth of 13 mm and a nominal groove width of 1.2 mm; these parameters define the intended measurement range for the M240.326. Which adapters and calipers are compatible? Compatibility is achieved via the Ø5 mm shank interface; the insert fits standard caliper adapters that accept a Ø5 mm probe shank and is intended for manual caliper-based inspection setups. How does the insert improve repeatability compared with ad‑hoc probing? By providing a defined contact geometry and a stable Ø5 mm connection, the probe reduces lateral play and inconsistent contact angles, leading to more repeatable readings during routine checks. What applications are typical for this measuring tip? Typical uses are groove inspection in housings, bearing seats and small machined components where access is limited and a compact, repeatable measuring tip is required for quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
140mm Digital Inside Caliper Short Jaw Preset 3V Stainless Steel In Plastic Case - Metav IndustryLine
Take advantage of the combination of precise internal measurement capability, a compact short jaw for groove work, and a durable stainless steel build for reliable workshop performance; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. M240.032.N – Digital internal caliper, short jaw, 3–140 mm (Metav IndustryLine) The M240.032.N is a digital internal caliper designed for accurate measurement of internal grooves and bores in standard workshop and machine‑building environments. Short 4 mm jaw for internal grooves Measuring range 3–140 mm for workshop use Hardened stainless steel with metal housing Digital preset with ON/OFF and SET/PRESET Accurate internal gauging for everyday workshop tasks The short, 4 mm jaw is engineered for tight internal spaces and groove geometries, delivering repeatable results where full-length jaws would be obstructive. With a measuring range of 3–140 mm the instrument sits in the Standard class for calipers, offering an optimum balance between reach and rigidity for typical machine‑shop and metalwork tasks. The 0.01 mm display resolution supports routine quality checks and production inspections without overcomplicating handling or data interpretation. Fast digital workflow with preset convenience Digital operation simplifies zeroing and comparative measures: the integrated digital preset and SET/PRESET function allow a reference value to be stored quickly, while the ON/OFF control conserves power. The device includes a dedicated RB 5 data output to transfer readings into inspection protocols or SPC systems, reducing transcription errors and accelerating documentation. This combination of features supports measurable time savings across repetitive inspection tasks and facilitates integration into existing quality workflows. Robust construction for a dependable toolroom partner Constructed from hardened stainless steel with a protective metal housing, the caliper tolerates regular workshop use and resists corrosion in industrial environments. The compact design and balanced weight make single‑hand handling straightforward, while the solid materials ensure long service life and minimal maintenance. Delivered to industrial standards, the instrument provides the mechanical integrity required for daily production checks and toolroom measuring duties. For reliable internal measuring in metalwork and precision workshops, request Metav IndustryLine guidance or place your order via Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and next steps Technical data SKU: M240.032.N GTIN: 4054469159904 Article group: Messschieber (calipers) Label: Digital internal caliper, 3–140 mm, short jaw, 3 V with preset, INOX, factory standard Facts Measuring range: 3–140 mm Minimum range: 3 mm Maximum range: 140 mm Resolution: 0.01 mm Jaw length: 4 mm Power supply: 3 V Weight: 0.44 kg Customs tariff number: 90173000 Special features Short jaw optimised for internal groove measurement Digital display with ON/OFF and SET/PRESET Data output: RB 5 Material: hardened stainless steel with metal housing Factory standard (Werksnorm) Digital instrument suitable for routine quality control FAQ What measurement range does this caliper cover? The caliper covers a measuring range of 3–140 mm and is therefore classified in the Standard range for workshop use. Is the instrument suitable for internal groove measurement? Yes, the short 4 mm jaw is specifically suited to internal groove and tight‑space measurements, making the M240.032.N practical for bores and grooves. How precise are the readings from this digital caliper? The digital display provides a resolution of 0.01 mm, which is appropriate for standard machine‑shop inspections and production checks. Can measurement data be transferred to a computer or SPC system? The caliper is equipped with an RB 5 data output to enable transfer of readings into inspection software or documentation systems. What is the construction material and how durable is it? The instrument is made from hardened stainless steel with a metal housing, designed for robust performance in workshop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1450mm Electronic Scale With Ø41mm Magnifier, Proximity Output, mm/inch Reset/Preset, Carbon Body, Supplied In Case - Metav IndustryLine
Take advantage of a long measuring range, light carbon construction and digital readout that streamlines large-format inspection. The combination of robust design and proximity data output supports efficient measurement workflows; order the measuring rule directly via Metav Werkzeuge or consult our advisors for specification matching. Measuring rule M838.718 — carbon, 1,450 mm range, digital readout (Metav IndustryLine) The Measuring rule M838.718 is a long-format, digitally equipped measuring rule designed for precise linear measurement of large components in workshop and inspection environments. Carbon-bodied rule, low weight and high stiffness 1,450 mm measurement range for large components Digital mm/inch display with 0.01 mm resolution Integrated Ø41 mm magnifier for fine readings Precise long-range measurement for workshop and inspection This long-format measuring rule delivers a measuring range of 0–1,450 mm with a resolution of 0.01 mm, enabling reliable readings across extended spans. The specified accuracy of 0.06 mm ensures measurements remain within tight tolerances over the full length, reducing the need for repeated checks and rework. The clear mm/inch display with Reset/Preset functions simplifies conversions and setup for different workflows, while the relatively low mass helps maintain steady handling during an extended inspection cycle. Seamless data integration to speed up traceability Equipped with a Proximity data output, the device supports straightforward integration into data-capture stations and inspection software, removing manual transcription and the associated error risk. The electronic readout and preset features enable quick switchovers between measurement tasks, and the power provided by a single 1x CR2023 battery keeps maintenance simple. These capabilities together increase throughput in serial inspection and support digital quality records without complex retrofit. Robust, lightweight design for repeatable handling Constructed from carbon, the rule combines stiffness with reduced weight, making it easier to manoeuvre over long components while maintaining measurement stability; the overall length is 1,720 mm, optimised to cover the measuring span plus end clearance. An integrated Ø41 mm magnifier enhances legibility for fine graduations, and the instrument is supplied delivered in a protective transport case, which helps preserve calibration and finish during storage and transit. The compact electronics and ergonomic form reduce operator fatigue, improving reproducibility over long measurement sessions. Suited to large-format tasks and reliable provenance Classified within the long-range segment, the device is intended for large components and assemblies where reach and repeatability matter: sheet-metal fixtures, housings and longer shafts benefit from this format. Backed by the Metav quality filter in Emmerich, this product forms part of an offering that brings industrial-grade precision to workshops and production lines, combining proven technical performance with dependable supply and service. The practical result is fewer measurement interruptions and a smoother production flow. Contact Metav Werkzeuge for a tailored quote or specification sheet citing SKU M838.718 — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M838.718 GTIN: 4061905449079 Manufacturer: Metav IndustryLine Facts Measuring range: 0–1,450 mm Overall length: 1,720 mm Resolution: 0.01 mm Accuracy: 0.06 mm Weight: 3.7 kg Magnifier diameter: Ø41 mm Battery: 1x CR2023 Special features Material: Carbon Digital mm/inch display with Reset/Preset Proximity data output for integration Delivered in a protective transport case Digital electronic readout FAQ How accurate is the Measuring rule M838.718 for long-span checks? The measuring rule M838.718 from Metav IndustryLine offers an accuracy of 0.06 mm across its 0–1,450 mm measuring range, suitable for workshop-level tolerances on large components. Can the device interface with inspection software or data loggers? Yes, the measuring rule includes a Proximity data output that enables connection to compatible data-collection systems for automated logging and traceability. Is the display switchable between metric and imperial units? The electronic readout supports mm/inch and features Reset/Preset controls, allowing quick switching between unit systems and fast setup for different tasks. What protection is provided for transport and storage? The instrument is supplied delivered in a protective transport case to safeguard the rule and electronics during transit and storage, preserving measurement consistency. What materials and handling benefits does this rule provide on the shop floor? Made from carbon, the rule balances stiffness and reduced weight, improving handling for long-span measurements; the integrated Ø41 mm magnifier aids precise reading of graduations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14–200mm Digital Internal Caliper Long Jaw Preset Display Stainless Steel Plastic Case - Metav IndustryLine
Take advantage of the long 75 mm jaw and the digital preset function to speed up internal dimension checks while keeping reproducibility high; the stainless, hardened construction ensures durability in workshop environments. Order the Digital internal caliper M240.023.N directly via Metav Werkzeuge or ask our consultants if needed. Digital internal caliper M240.023.N – 14–200 mm, long jaw 75 mm (Metav IndustryLine) Digital internal caliper M240.023.N offers precise internal measurements for workshop quality control and production inspection, optimised for repeatable checks in metalworking and assembly operations Long 75 mm jaw for deep inside measurements Digital display with ON/OFF and SET/PRESET Stainless hardened steel with metal housing Delivered in protective case, works standard included Reliable precision for everyday workshop control Classified in the Standard range (maximum measuring length 14–200 mm), this instrument delivers the sweet spot between reach and stiffness required in machine and metalworking environments. The instrument’s 0.01 mm resolution on the digital readout supports routine quality control tasks with clear, numeric readouts that reduce interpretation errors and speed up inspection cycles. The longer jaw keeps the measuring faces engaged in recesses and bore-like features, helping to maintain consistent contact geometry and minimise measurement scatter. This leads to fewer re-measures and a smoother production flow when integrated into standard inspection routines. Faster checks thanks to preset and clear digital controls The electronic display is fitted with practical keys — ON/OFF and SET/PRESET — so common reference positions can be stored and reused, cutting set-up time for repeated tasks. The instrument is powered by a 3 V system and provides a data output (RB 5) for simple transfer to data-logging devices or quality software, enabling streamlined documentation in production environments. Presetting a reference dimension before a batch run reduces operator steps, increasing throughput while maintaining reliable traceability of measured values. Robust build designed for workshop use Constructed from stainless, hardened steel with a metal housing, the caliper resists everyday knocks and resists corrosion in workshop atmospheres. The long jaw (75 mm) is specifically shaped to reach into deeper bores and recesses without compromising rigidity. The tool ships in a protective case to assist safe transport and storage and is supplied to works standard (Werksnorm), reflecting factory-checked conformity before dispatch. The instrument’s 0.6 kg mass contributes to a feeling of solidity in the hand, helping to stabilise measurements where a firmer grip is required. Practical application and operator guidance This digital internal caliper is optimised for internal dimension control tasks in machine shops, jig production and assembly inspection where consistent, repeatable results are essential. The SET/PRESET feature is useful for checking batches against a go/no‑go dimension or for rapid verification during mounting and alignment operations. The digital readout simplifies readings under workshop lighting and the data output option supports integration into routine documentation workflows. For users less familiar with electronic calipers, presetting a zero position on a gauge block or reference plug is recommended to establish a consistent baseline for subsequent checks. For dependable internal measurement capability from the Metav IndustryLine, contact Metav Werkzeuge in Emmerich to order the M240.023.N or request tailored advice from our consultants at info@metav-werkzeuge.com Technical data SKU: M240.023.N GTIN: 4054469159874 Category: Messschieber Facts Measuring range: 14–200 mm Jaw length: 75 mm Resolution: 0.01 mm Weight: 0.6 kg Power supply: 3 V Data output: RB 5 Special features Material: stainless, hardened steel; metal housing Digital display with ON/OFF and SET/PRESET Long jaw optimised for internal measurements Delivered in protective case for transport Supplied to works standard (Werksnorm) FAQ What measuring tasks is this caliper designed for? The Digital internal caliper M240.023.N from Metav IndustryLine is designed primarily for precise internal dimension checks within the 14–200 mm range and for applications where a longer jaw is needed. What accuracy and resolution does the instrument offer? The instrument provides a digital resolution of 0.01 mm, suitable for standard workshop quality control where clear numeric read‑outs and repeatable readings are required. Is the caliper supplied ready for use out of the box? The Digital internal caliper M240.023.N is delivered to works standard and shipped in a protective case; basic set-up such as battery insertion and zeroing on a reference is required before the first measurement. How is measurement data exported from the caliper? This instrument offers a data output labelled RB 5 to enable connection to compatible data‑logging or quality systems for straightforward transfer of measured values. Which materials and environments is the caliper suited to? With its stainless, hardened steel construction and metal housing, the M240.023.N is suited to workshop and production environments where corrosion resistance and mechanical robustness are needed Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150 mm Digital Caliper With Small Tips, Metal Housing, 0.01 mm Resolution, Battery Operated, Supplied In Case - Metav IndustryLine
Take advantage of the combination of 5–150 mm measuring range, 0.01 mm resolution and a hardened stainless-steel metal housing for reliable, workshop-grade measurements. Order the caliper directly via Metav Werkzeuge or contact the technical team for integration advice. M240.024 Digital Caliper (5–150 mm) by Metav IndustryLine — Hardened Stainless Steel, Metal Housing The M240.024 Digital Caliper is a standard-range precision instrument for workshop and machine‑shop metrology, offering a robust metal housing and a clear digital readout for repeatable dimensional checks. Measuring range 5–150 mm Resolution 0.01 mm for precise checks Hardened stainless-steel metal housing RB 5 data output, ON/OFF and SET/PRESET Accurate measurements that speed up inspection This caliper provides a measuring range of 5–150 mm with a readout resolution of 0.01 mm, placing it firmly in the standard category for general machine‑shop and metal‑working tasks. The fine display step makes comparative and pass/fail checks straightforward, while the compact design supports quick handling for repetitive measurements. As a result, throughput in quality control can be improved since each measurement is both rapid and traceable. Robust construction for daily workshop use Built with hardened stainless steel and a protective metal housing, the tool resists the knocks and contaminants common in industrial environments. The small jaw geometry (noted in the product description) enables access to narrow features and internal profiles without sacrificing stability. A lightweight feel at approximately 0.4 kg keeps the instrument manoeuvrable during extended use, reducing operator fatigue and maintaining consistent measurement technique over long shifts. Digital features that integrate with production systems The clear digital display includes ON/OFF and SET/PRESET functions for fast zeroing and comparative measurement routines. Data transfer is supported via the RB 5 interface, allowing straightforward connection to data loggers or SPC stations for documentation and process control. These capabilities turn a handheld caliper into a reliable node in a larger quality‑assurance workflow, helping to reduce documentation errors and save time at the inspection stage. For dependable workshop precision and seamless data capture, choose the Metav IndustryLine M240.024 — contact Metav Werkzeuge in Emmerich for purchasing or for specific integration guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M240.024 GTIN: 4054469112633 Manufacturer: Metav IndustryLine ECLASS: 21170344 Numbers / Core technical data Measuring range: 5–150 mm Resolution / display: 0.01 mm Power supply: 3 V Weight: 0.4 kg Tariff number: 90173000 Special features / Versions Material: hardened stainless steel, metal housing Digital readout with ON/OFF and SET/PRESET buttons Data output: RB 5 Small jaw geometry for narrow features FAQ What measurement range does the caliper cover? The M240.024 digital caliper covers a range from 5 to 150 mm, making it suitable for standard workshop and machine‑shop tasks. What resolution and display features are available? The instrument offers a 0.01 mm resolution and a digital display with ON/OFF and SET/PRESET functions for zeroing and comparative checks. Can measurement data be exported? Yes. The caliper includes an RB 5 data output for connection to data loggers or SPC systems to streamline documentation. Is the caliper suitable for harsh workshop environments? The caliper is manufactured from hardened stainless steel and housed in metal to withstand everyday workshop conditions while maintaining measurement reliability. Does the caliper require any special calibration on delivery? The caliper is supplied ready for routine use with factory zeroing and preset functions; any traceable calibration requirements should be discussed with Metav Werkzeuge if needed. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1500mm Digitaler Messschieber, 0,01mm Auflösung, IP 67, ISO 17025 kalibriert - Microtech Metrology
Das Microtech Messschieber verbindet Genauigkeit und Praxistauglichkeit: Mit einer Ablesung von 0,01 mm, einer reproduzierbaren Genauigkeit von 0,07 mm und IP 67 Schutz ist er ideal für präzise Längenmessungen an großen Bauteilen. Die Auslieferung einschließlich Kalibrierzeugnis nach ISO 17025 schafft Rechtssicherheit für Prüfprotokolle. Nutzen Sie die Kombination aus Reichweite, robuster Konstruktion und nachweisbarer Kalibrierung und bestellen Sie direkt über Metav Werkzeuge oder kontaktieren Sie unsere Beratung. Messschieber 0–1500 mm von Microtech Metrology Der Messschieber ist ein digitaler Messschieber für präzise Längenmessungen bis 1500 mm und richtet sich an Fertigung, Vorrichtungsbau und Laboranwendungen. ISO 17025 Kalibrierzeugnis inklusive Schutzart IP 67 für staub- und wassergeschützten Einsatz Messbereich bis 1500 mm für großformatige Bauteile Swiss electric Display 11 mm gut ablesbar ABS Messsystem mit Ablesung 0,01 mm Präzision und Messkennwerte für die Fertigung Die Kombination aus Ablesung von 0,01 mm und einer angegebenen Genauigkeit von 0,07 mm ermöglicht schnelle und vergleichbare Messungen in der Serienprüfung. Das ABS Messsystem sorgt für zuverlässige Nulldaten auch bei wechselnden Temperaturbedingungen, während die lesefreundliche Anzeige das Ablesen beschleunigt. Für Messaufgaben, bei denen Messunsicherheit minimiert werden muss, bietet dieses Gerät eine solide Basis für Prüfschritte und Dokumentation. Robuste Bauart und Schutz für den rauen Werkstatteinsatz Der Messschieber verfügt über die Schutzart IP 67, was staubdichten Betrieb und Schutz gegen zeitweiliges Untertauchen bedeutet; dadurch eignet sich das Werkzeug für feuchte oder verschmutzte Produktionsumgebungen. Der stabil dimensionierte Querschnitt von 42x8 sowie die lange Schneide von 300 mm bieten die notwendige Steifigkeit für reproduzierbare Messwerte an längeren Werkstücken. Die digitale Anzeige vom Typ Swiss electric Display mit 11 mm Ziffernhöhe verbessert die Ergonomie bei schnellen Messfolgen. Einsatzbereiche und Handhabung in der Praxis Mit einem Messbereich von 0–1500 mm fällt das Gerät in die Lang-Klasse der Schiebelehren, wodurch es die Balance zwischen Reichweite und Bedienbarkeit wahrt. Das macht den Schieber besonders geeignet für Rohr- und Behälterbau, Vorrichtungs‑ und Formenbau sowie für die Endkontrolle großer Baugruppen. Die einfache Einhandbedienung und die klaren Skalen reduzieren Messzeiten und fördern effiziente Arbeitsabläufe in Werkstatt und Produktion. Kalibrierung, Nachweis und Lieferumfang Die Lieferung beinhaltet ein vollständiges Kalibrierzeugnis nach ISO 17025, womit Messungen dokumentierbar und auditfähig sind. Für Anwender, die Messergebnisse in Prüfberichten benötigen, reduziert dies administrative Nacharbeit und erhöht die Akzeptanz im Audit. Die digitale Technik mit ABS Messsystem sorgt zudem für stabile Referenzwerte über lange Messzyklen. Empfehlung: Für Anwendungen mit großem Messbereich und hohem Dokumentationsbedarf empfiehlt sich der Einsatz des Microtech Messschiebers mit ISO‑Kalibrierung; kontaktieren Sie Metav Werkzeuge per eMail info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 für Beratungsbedarf und Beschaffung. Produktmerkmale Artikelnummer: 141073815 GTIN: 4061905454455 Marke: Microtech Metrology Bezeichnung: Messschieber Messsystem: ABS Daten Messbereich: 0–1500 mm Messbereich maximal: 1500 mm Ablesung: 0,01 mm Genauigkeit: 0,07 mm Schnabellänge: 300 mm Querschnitt: 42x8 Besonderheiten ISO 17025 Kalibrierung: Kalibrierzeugnis wird mitgeliefert IP 67: Staubdicht, kurzzeitiges Untertauchen möglich Swiss electric Display: 11 mm Ziffernhöhe, gute Ablesbarkeit ABS Messsystem: stabile Referenzdaten bei Temperaturschwankungen FAQ Wie genau ist die Messung mit diesem Messschieber? Die angegebene Genauigkeit beträgt 0,07 mm bei einer Ablesung von 0,01 mm; der Microtech Messschieber eignet sich damit für viele industrielle Prüfaufgaben, bei denen Wiederholbarkeit und Nachvollziehbarkeit gefordert sind. Wird der Messschieber kalibriert geliefert? Ja, der Messschieber wird mit einem Kalibrierzeugnis nach ISO 17025 ausgeliefert, sodass Messergebnisse auditfähig sind und sich direkt in Prüfprotokolle einbinden lassen. Für welche Anwendungen eignet sich der Messbereich bis 1500 mm? Der Messbereich bis 1500 mm platziert das Gerät in der Lang-Klasse und ist ideal für Rohr‑ und Behälterbau, Vorrichtungs‑ und Formenbau sowie für die Endkontrolle großer Baugruppen. Ist das Gerät für den Einsatz in feuchten Umgebungen geeignet? Mit der Schutzart IP 67 ist der Microtech Messschieber gegen Staub geschützt und bietet Schutz gegen zeitweiliges Untertauchen, was den Einsatz in feuchten oder verschmutzten Produktionsbereichen erleichtert. Wie gut lässt sich das Display ablesen? Die Digitalanzeige Swiss electric Display verfügt über 11 mm hohe Ziffern und ist damit auch bei schneller Arbeit gut ablesbar, wodurch Messzyklen beschleunigt werden. Hersteller: Microtech Metrology; Microtech, Nizhneyurkovska str., 45a; 04080 Kyiv; Ukraine; tool@microtech.tools
1500mm Digitaler Messschieber, 0,01mm Auflösung, IP 67, ISO 17025 Kalibriert - Microtech Metrology
Kombinieren Sie die Messgenauigkeit von 0,01 mm Ablesung mit der zuverlässigen ISO 17025 Kalibrierung und der Reichweite bis 1.500 mm für reproduzierbare Ergebnisse in der Fertigung. Bestellen Sie den Messschieber direkt über Metav Werkzeuge oder fragen Sie die technische Beratung bei Bedarf an. Messschieber Digital von Microtech Metrology Der Messschieber Digitaler Präzisionsschieber für Messaufgaben mit hoher Reichweite und nachgewiesener Kalibrierqualität. Messschieber »Digital« von Microtech Metrology Gut ablesbare Swiss electric Digit Anzeige Messbereich bis 1.500 mm für große Bauteile Auflösung 0,01 mm, Genauigkeit 0,05 mm ISO 17025 Kalibrierung mit Kalibrierzeugnis Präzision und Nachweisbarkeit für Fertigungsprozesse Der digitale Schieber liefert dank 0,01 mm Auflösung zuverlässige Messergebnisse, die Prüfprozesse effizient machen. Die dokumentierte ISO 17025 Kalibrierung sorgt für Nachvollziehbarkeit bei Prüfprotokollen und reduziert Nacharbeit in der Produktion. Für Qualitätssicherung bedeutet das: weniger Nachprüfungen, schnellere Freigaben und ein klarer Nachweis für Auditoren. Große Reichweite, reproduzierbare Messungen Mit einem Messbereich bis 1.500 mm fällt der Schieber in die Kategorie Lang und eignet sich daher für größere Bauteile im Vorrichtungs‑ und Formenbau. Die lange Schenkelgeometrie wurde so ausgelegt, dass die Steifigkeit erhalten bleibt und Messungen über die gesamte Länge reproduzierbar bleiben. Anwender profitieren von einer Balance aus Reichweite und Handhabung. Robuste Bauweise für die Werkstattumgebung Die IP‑Schutzklasse IP 67 macht das Messgerät unempfindlich gegen Spritzwasser und kurzzeitiges Eintauchen, wodurch der Schieber auch in anspruchsvollen Werkstattumgebungen eingesetzt werden kann. Der Querschnitt 42x8 stabilisiert den Balken, während die Schnabellänge 150 mm flexible Zugänglichkeit bei Innen- und Außenmessungen erlaubt. Datenerfassung und Schnittstellen für moderne Abläufe Der integrierte Wireless Datenausgang ermöglicht schnelle Übertragung von Messwerten in Prüfsoftware und Messprotokolle. Dies reduziert Tippfehler, beschleunigt Dokumentationsprozesse und integriert das Messgerät nahtlos in digitale Fertigungsprozesse. Die gut ablesbare Swiss electric Digit Anzeige mit 14 mm Höhe vereinfacht die Erfassung manueller Messungen. Zielgruppe und praktische Anwendungsempfehlung Der Schieber richtet sich an Fertigungsbetriebe, Prüfstellen und Werkzeugbauer, die präzise Längenmessungen an größeren Bauteilen benötigen. Die Kombination aus hoher Auflösung, robuster Schutzklasse und kalibrierter Auslieferung macht das Instrument zur verlässlichen Ergänzung in Prüfständen, Messräumen und Fertigungslinien. Bestellen Sie den Microtech Metrology Messschieber mit ISO 17025 Kalibrierung direkt bei Metav Werkzeuge oder fordern Sie weitere technische Daten per eMail an: info@metav-werkzeuge.com / Telefon +49 2822 7131930. Technische Daten Artikelnummer: 141073892 Marke: Microtech Metrology Bezeichnung: Messschieber mit langem Messschnabel Fakten Messbereich: 0–1500 mm Genauigkeit: 0,05 mm Ablesung: 0,01 mm Schnabellänge: 150 mm Querschnitt: 42x8 Digitalanzeige: Swiss electric Digit Höhe 14mm Besonderheiten IP 67 Schutz: staubdicht und kurzzeitiges Eintauchen Wireless Datenausgang: kabellose Datenübertragung ABS Messsystem: absolute Positionsspeicherung ISO 17025 Kalibrierung: Lieferung mit Kalibrierzeugnis Messbereich Kategorie: Lang (1.000–2.000 mm) FAQ Wie genau ist die Messung mit diesem Messschieber? Der Messschieber von Microtech Metrology bietet eine Ablesung von 0,01 mm und eine Genauigkeit von 0,05 mm, geeignet für präzise Werkstatt‑ und Fertigungsprüfungen. Wird der Messschieber kalibriert geliefert? Ja, der Microtech Metrology Messschieber wird nach ISO 17025 kalibriert ausgeliefert und kommt mit einem Kalibrierzeugnis. Für welche Anwendungen eignet sich der 1.500 mm Messbereich? Der große Messbereich macht den Schieber ideal für Vorrichtungsbau, Gehäusemessungen und größere Spannmittel in der Serienfertigung. Welche Schnittstellen stehen für die Datenerfassung zur Verfügung? Das Gerät verfügt über einen Wireless Datenausgang, der eine einfache Integration in Prüfsoftware und Messdatenerfassung erlaubt. Ist das Gerät in feuchten Werkstattumgebungen einsetzbar? Durch die IP 67 Schutzklasse ist der Schieber gegen Spritzwasser geschützt und für den Einsatz in anspruchsvollen Werkstattbedingungen geeignet. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv; Ukraine; tool@microtech.tools
1500mm Digitaler Messschieber, 0,01mm Auflösung, IP 67, ISO 17025 kalibriert – Microtech Metrology
Kombinieren Sie Präzision, ISO‑17025‑Kalibrierung und robusten IP‑Schutz für verlässliche Messergebnisse; beziehen Sie den Messschieber direkt über Metav Werkzeuge oder fragen Sie die technische Beratung an. Messschieber Digitaler Messschieber von Microtech Metrology Messschieber von Microtech Metrology, digital für präzise Längenmessungen im großformatigen Bereich Digitalanzeige Swiss Electric, 11 mm Ziffernhöhe ISO‑17025 Kalibrierzeugnis inklusive IP67 Schutz gegen Staub und Wasser Messbereich 0–1.500 mm für große Bauteile ABS Messsystem für zuverlässige Messwerte Präzision und Reproduzierbare Messwerte für Produktion und Labor Der Messschieber liefert eine Ablesung von 0,01 mm und eine dokumentierte Genauigkeit 0,05 mm, wodurch er sich für präzise Prüfaufgaben in Fertigung und Werkstatt eignet. Die integrierte Digitalanzeige mit 11 mm Ziffernhöhe sorgt für schnelle Ablesbarkeit, während das ABS‑Messsystem positionssichere Ergebnisse ohne Referenzverlust ermöglicht. Durch die mitgelieferte ISO‑17025‑Kalibrierung wird die Messspurführung nachvollziehbar und auditfähig gemacht. Ergonomie und Handling bei langen Messfeldern Mit einem Messbereich bis 1.500 mm und einer Schnabellänge von 150 mm ist der Schieber für große Spannmittel und Bauteile ausgelegt. Der Querschnitt von 42x8 wurde so gewählt, dass Steifigkeit und Handhabung im Einklang stehen; das reduziert Messfehler durch Durchbiegung und erleichtert Einhandmessungen an längeren Werkstücken. Die robuste Bauweise unterstützt wiederholte Einsätze in rauer Umgebungsbedingungen. Einsatzbereiche und Zielgruppe für Lang‑Messungen Dieses Messwerkzeug ist für Anwendungen im Vorrichtungs‑ und Formenbau, in der Maschinenmontage und in der Qualitätskontrolle großer Baugruppen konzipiert. Die Auslegung auf lange Messstrecken verbindet Reichweite mit praxisgerechter Handhabung; somit ist das Gerät ideal für Anwender, die großformatige Bauteile routinemäßig prüfen und reproduzierbare Toleranzüberwachungen benötigen. Schutz, Dokumentation und Serviceaspekte Der Schieber erfüllt IP67‑Anforderungen und bietet damit Schutz gegen Staub und zeitweiliges Untertauchen, was Reinigung und Einsatz in anspruchsvollen Produktionsbereichen erleichtert. Das mitgelieferte Kalibrierzeugnis gemäß ISO‑17025 reduziert Prüfaufwand bei Erstanschaffung und erleichtert die Integration in betriebliche Qualitätsdokumentationen. Für weiterführende technische Auskünfte steht Metav mit Beratung und schneller Versorgung zur Seite. Empfehlung: Den Microtech Metrology Messschieber mit 1.500 mm Messbereich und ISO‑17025‑Kalibrierung über Metav Werkzeuge beziehen; bei technischen Fragen eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 kontaktieren. Produktmerkmale Artikelnummer: 141073812 Marke: Microtech Metrology Bezeichnung: Messschieber Messsystem: ABS GTIN: 4061905454448 Fakten Messbereich: 0–1500 mm Genauigkeit: 0,05 mm Ablesung: 0,01 mm Querschnitt: 42x8 Displayhöhe: 11 mm Besonderheiten IP‑Schutz: IP 67 (Schutz gegen Staub und Wasser) ISO 17025 Kalibrierung: Kalibrierzeugnis liegt bei (Laborstandard) Digitalanzeige: Swiss Electric Digit, Ziffernhöhe 11 mm Schnabellänge: 150 mm ABS: Absolutmesssystem, kein Referenzverlust FAQ Ist der Messschieber für den Einsatz in rauer Produktionsumgebung geeignet? Der Microtech Metrology Messschieber verfügt über IP67 Schutz und ist somit gegen Staub und zeitweiliges Untertauchen geschützt, was den Einsatz in anspruchsvollen Produktionsumgebungen unterstützt. Wird der Messschieber kalibriert geliefert? Ja, der Messschieber wird mit einem Kalibrierzeugnis nach ISO‑17025 ausgeliefert, sodass die Messergebnisse dokumentiert und auditfähig sind. Welche Auflösung und Genauigkeit liefert das Gerät? Die Digitalanzeige bietet eine Auflösung von 0,01 mm, die dokumentierte Genauigkeit beträgt 0,05 mm, geeignet für präzise Prüfungen in der Fertigung und Qualitätskontrolle. Eignet sich das Gerät für große Bauteile und Montagen? Der Messbereich von 0–1.500 mm und die robuste Bauweise machen den Schieber passend für große Bauteile, Montagearbeiten und Vorrichtungsprüfungen. Welche Anzeigeeigenschaften hat die Digitalanzeige? Die Swiss Electric Digitalanzeige hat eine Ziffernhöhe von 11 mm für gute Lesbarkeit und unterstützt schnelle, eindeutige Messergebnisse. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
1500mm Digitaler Messschieber, 0,01mm, IP 67, Wireless, ISO 17025 Kalibriert - Microtech Metrology
Der lange Messbereich, die ISO 17025‑Kalibrierung und der kabellose Datenausgang bieten eine praxisnahe Lösung für die Qualitätskontrolle großer Bauteile; bestellen Sie den Messschieber direkt über Metav Werkzeuge oder lassen Sie sich telefonisch und per E‑Mail beraten. Messschieber — Digitaler Messschieber von Microtech Metrology Der Messschieber ermöglicht präzise Längenmessungen bis 1 500 mm und ist für Werkstatt, Vorrichtungsbau und Fertigung konzipiert. Lange Messreichweite bis 1 500 mm Kalibriert nach ISO 17025 mit Kalibrierzeugnis Kabellose Datenübertragung (Wireless) Swiss Electric Display, Ziffernhöhe 14 mm Schutzart IP 67 für rauen Einsatz Praxisgerecht konzipiert für großformatige Messaufgaben Die Schieblehre wurde für Messaufgaben entwickelt, bei denen Reichweite und Handhabung zusammenkommen. Mit einem Messbereich bis 1 500 mm fällt das Gerät in die Kategorie Lang, die speziell für längere Messstrecken ausgelegt ist. Die lange Backengeometrie und die Schnabellänge von 300 mm erlauben Innen‑ und Außenmessungen großer Bauteile, ohne dass mehrfaches Umsetzen nötig wird. Das reduziert Messfehler und beschleunigt Abläufe in der Werkstatt. Präzision und geprüfte Kalibrierung für die Qualitätskontrolle Für reproduzierbare Ergebnisse sorgt eine Ablesung von 0,01 mm und eine angegebene Genauigkeit von 0,07 mm; diese Kennwerte ermöglichen verlässliche Prüfungen in der Serienfertigung. Die Auslieferung erfolgt vollständig kalibriert und umfasst ein Kalibrierzeugnis nach ISO 17025, was die Einsatzbereitschaft für Prüfmittelüberwachung und Dokumentation erleichtert. Damit eignet sich das Messgerät für Audit‑gerechte Messprozesse und die lückenlose Rückverfolgbarkeit. Elektronik, Anzeige und Schutz für den rauen Werkstattalltag Die Anzeige basiert auf einer Swiss Electric Anzeige mit 14 mm Ziffernhöhe, die auch bei schlechten Lichtverhältnissen gut ablesbar bleibt. Die Elektronik ist gegen Staub und zeitweiliges Untertauchen geschützt (IP 67), sodass der Einsatz direkt an Fertigungslinien und in produktionsnahen Bereichen möglich ist. Das robuste Profil mit einem Querschnitt von 42x8 mm sorgt für Stabilität über lange Messlängen und für eine sichere Führung bei manuellen Messungen. Datenübertragung und Integration in digitale Workflows Der kabellose Datenausgang ermöglicht die einfache Übertragung von Messwerten an Auswertesysteme oder Handcomputer und reduziert Übertragungsfehler. Die Kombination aus digitaler Anzeige und Wireless‑Schnittstelle erleichtert die Integration in Prüfprotokolle und Fertigungssteuerung. Für Anwender, die Messdaten automatisch erfassen möchten, bietet das Gerät somit einen klaren Effizienzvorteil gegenüber rein analogen Lösungen. Empfehlung: Für präzise Langmessungen das ISO‑17025‑kalibrierte Microtech Messschieber direkt bei Metav Werkzeuge anfragen — E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930; alternativ WhatsApp +49 170 2837271. Produktmerkmale Artikelnummer: 141073895 Marke: Microtech Metrology Bezeichnung: Messschieber Messsystem: ABS GTIN: 4061905454677 Fakten Messbereich: 0–1500 mm Messbereich Max: 1500 mm Ablesung: 0,01 mm Genauigkeit: 0,07 mm Schnabellänge: 300 mm Digital Anzeige Höhe: 14 mm Querschnitt: 42x8 mm Besonderheiten IP 67 (Staubdicht, Schutz gegen zeitweiliges Untertauchen) Datenausgang: Wireless (kabellose Datenübertragung) Swiss Electric Anzeige (helle, gut ablesbare Ziffern) ISO 17025 Kalibrierung mit Kalibrierzeugnis Digitale Schieblehre für großformatige Werkstattanwendungen FAQ Ist das Gerät für die Messung großer Werkstücke geeignet? Ja. Der Messbereich bis 1 500 mm qualifiziert den Schieber für großformatige Messaufgaben; die Ausführung in der Kategorie Lang erleichtert stabile Messungen an langen Bauteilen. Wird der Messschieber kalibriert geliefert? Ja. Der Microtech Messschieber wird vollständig kalibriert ausgeliefert und enthält ein Kalibrierzeugnis nach ISO 17025, sodass das Messgerät sofort auditfähige Messergebnisse liefert. Wie genau sind die Messwerte und wie fein ist die Anzeige? Die Ablesung beträgt 0,01 mm, die angegebene Genauigkeit liegt bei 0,07 mm; die Swiss Electric Anzeige mit 14 mm Ziffernhöhe sorgt für klare Ablesbarkeit auch bei schneller Prüfung. Kann man Messwerte digital weiterverarbeiten? Die kabellose Datenübertragung (Wireless) ermöglicht die Übertragung von Messwerten an Auswertegeräte und Prüfsoftware, was die Integration in digitale Workflows erleichtert. Ist das Gerät für den Einsatz in rauer Umgebung geeignet? Durch die Schutzart IP 67 ist das Messgerät gegen Staub und zeitweiliges Untertauchen geschützt und für produktionsnahe Umgebungen geeignet. Hersteller: Microtech Metrology; Microtech, Nizhneyurkovska str., 45a; 04080 Kyiv; Ukraine; tool@microtech.tools
150mm Caliper Jaw Adapter For 3.5mm Max Jaw Thickness, Attachment For Caliper Measuring Faces - Metav IndustryLine
Take advantage of precise retrofitting and compact design to expand measuring capability on standard calipers; compatibility with 150 mm instruments and a maximum jaw thickness of 3.5 mm make this accessory a practical workshop upgrade. Order the attachment directly via Metav Werkzeuge or consult the Metav team for integration advice. Measuring adapter for calipers M240.310.1 — retrofit for 150 mm calipers (Metav IndustryLine) A Measuring adapter for calipers M240.310.1 that converts standard caliper jaws into a focused contact point for small or awkward measurements, intended for workshop and inspection use. Adapter for 150 mm calipers Accepts jaw thickness up to 3.5 mm Lightweight, approx. 50 g Retrofits to analogue caliper jaws Improve measurement capability with a compact retrofit This adapter extends the usefulness of standard calipers by providing a secure contact point where the original jaws are too broad for fine features. Designed for compatibility with calipers that measure up to 150 mm, the attachment keeps additional mass to a minimum (approx. 0.05 kg), so measuring behaviour and hand balance remain close to normal. The limited jaw-thickness allowance of 3.5 mm ensures a snug fit on common caliper jaws and reduces the risk of lateral play, supporting more repeatable contact and faster setup when switching between general and fine measurements. Save time through straightforward installation and consistent results Fitting the adapter is a quick retrofit that integrates with analogue calipers without the need for special tools. The adapter’s mounting interface (mounting Ø 5 mm) aligns with standard jaw geometries, enabling a reliable mechanical coupling that speeds up routine checks and reduces handling time. As a simple accessory, it preserves the original instrument’s measuring sequence while extending its reach into smaller-diameter bores or narrow grooves, delivering a direct workflow benefit in everyday machine‑shop and inspection tasks. Dependable workshop accessory backed by Metav quality Manufactured for practical use and frequent handling, the attachment supports sustained inspection cycles while remaining unobtrusive in the tool kit. The design emphasises stable contact over decorative features, helping to avoid measurement artefacts caused by uneven jaw contact. Metav’s role as a precision partner means the accessory is part of a broader range aimed at making precise measurement affordable and reliable for workshops; the M240.310.1 is therefore a straightforward choice when consistent contact points and quick retrofits are required. Contact Metav Werkzeuge for tailored advice or to reserve the M240.310.1 measuring adapter for workshop use; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: M240.310.1 GTIN: 4054469167527 ECLASS: 21131720 Category: Accessory Facts Suitable for calipers up to 150 mm Max jaw thickness 3.5 mm Mounting diameter Ø5 mm Weight 0.05 kg Harmonised tariff code 90178090 Special features Attachment for caliper jaws Designed for analogue calipers Lightweight retrofit accessory Intended for workshop inspection tasks FAQ How is the adapter attached to a caliper? The adapter is clamped onto the caliper jaw and secured using the standard jaw geometry; the M240.310.1 is designed to fit jaws up to 3.5 mm in thickness and aligns via a Ø5 mm mounting interface. Is the adapter suitable for digital calipers? The accessory is primarily specified for analogue calipers; it can fit some digital models if the jaw form and thickness comply, but compatibility should be verified against the caliper jaw profile before use. What measurements become easier with this accessory? By providing a focused contact point, the attachment helps when measuring small bores, grooves or external features that are otherwise difficult to reach with full-width jaws, improving repeatability in these tasks. What are the identifying details for ordering? The product is listed as M240.310.1 (SKU M240.310.1) with GTIN 4054469167527 and a net weight of approximately 0.05 kg. Is the adapter delivered with a calibration certificate? This is an accessory for caliper jaws and is supplied without a calibration certificate; calibration considerations apply to the primary measuring instrument rather than the attachment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Depth Caliper Digital Colour 1.54" Touchscreen, IP54 Wireless USB - Microtech Metrology
Take advantage of high-resolution depth measurement and convenient data transfer via Wireless+USB, combined with IP54 protection and a clear 1.54" colour touchscreen for reliable inspection results; order directly through Metav Werkzeuge or consult our specialists for application advice. Microtech Metrology Depth Caliper with 1.54" colour touchscreen and Wireless+USB The Depth Caliper from Microtech Metrology is a digital depth gauge designed for precision workshop and inspection tasks, offering a compact standard-range solution for measurements up to 150 mm Touchscreen colour display 1.54" Wireless and USB data output IP54 protection against dust and splash Accuracy ±0.015 mm for precise depth measurement Precision where it matters: reliable depth readings for production control The digital depth gauge delivers measurable improvements in repeatability thanks to a reading resolution of 0.005 mm and an accuracy of ±0.015 mm, which together reduce uncertainty in depth measurements of grooves, shoulders and bores. The electronic measurement chain stabilises values that are otherwise sensitive to hand pressure or visual interpolation, so inspection protocols and process control routines gain consistency. As a standard-range instrument (measuring range up to 150 mm), it balances reach and rigidity for routine tasks in machining and metalwork without compromising handling. Streamlined data flow: integrate measurements into digital documentation Equipped with Wireless+USB output and a colour 1.54" touch display, the instrument makes it straightforward to capture, verify and transfer measurement data to inspection software or logbooks. The touchscreen simplifies on-tool checks and parameter changes, while wireless connectivity supports paperless workflows and reduces transcription errors. For manufacturing environments where traceable data and auditability count, this configuration shortens inspection cycles and supports quality documentation with fewer manual steps. Robust design for workshop conditions and frequent use With an IP54 rating, the depth gauge tolerates workshop dust and light splashing, prolonging service life in everyday industrial settings. The instrument’s compact construction suits the common demands of mechanical workshops and maintenance departments: good ergonomics for single-handed operation, sufficient profile stiffness for repeatable depth measurements and a footprint that fits into established inspection benches. The overall specification is tailored to the most common measuring tasks in the machine shop, offering a practical compromise between range and measurement stability. Practical application and workshop fit Designed for routine checks and first-off inspections, the caliper covers the typical measurement needs of toolrooms, assembly lines and quality control stations. The digital depth gauge is particularly useful where frequent documentation is required or where results must be uploaded to an inspection system. The combination of high resolution, dependable accuracy and digital output aids quicker decisions on part conformity and reduces downstream rework, supporting lean production practices and more efficient process control. For purchase enquiries or detailed application guidance, contact Metav Werkzeuge — Metav’s specialist team in Emmerich provides tailored advice and secure supply for precision measuring tools Technical Data Article number: 1432020157 GTIN: 4061905456213 Manufacturer: Microtech Metrology Facts Measuring range: 0–150 mm Resolution: 0.005 mm Accuracy: ±0.015 mm Protection class: IP54 Display: Colour 1.54" touchscreen Data output: Wireless+USB Digital: yes eClass: 21170344 Special features Digital depth caliper Standard-range instrument Compact workshop design Colour touchscreen interface FAQ What level of accuracy can be expected from this depth gauge? The depth gauge from Microtech Metrology provides an accuracy of ±0.015 mm with a reading resolution of 0.005 mm, delivering repeatable results suitable for standard workshop inspection and quality control tasks. How can measurement data be exported from the instrument? Measurement values are transmitted via Wireless+USB output, enabling direct transfer to documentation systems or PC-based inspection software without manual re-entry. Is the caliper suitable for use at the machine or in a production hall? Yes, the device features an IP54 protection rating, which offers resistance to workshop dust and light splashing, making it appropriate for use at machines and on the shop floor. Which measuring range category does this instrument belong to? With a maximum measuring range of 150 mm, the instrument falls into the standard category, providing a balanced combination of reach, stiffness and ease of handling for general machining and metalwork. Does the depth gauge support touchscreen operation for on-site settings? The caliper includes a 1.54" colour touchscreen that simplifies parameter entry and on-device verification, reducing the need for external tools during routine checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Depth Caliper Digital Height 13mm, USB, IP54 - Microtech Metrology
Benefit from workshop-grade reliability and straightforward data transfer: the caliper combines a 0–150 mm measuring range with ±0.02 mm accuracy and a USB data output for traceable results; order via Metav Werkzeuge or consult our specialists for integration advice. Depth caliper — digital depth measurement with USB and IP54 protection by Microtech Metrology Depth caliper for precise depth measurement in general machine and metalwork applications, offering robust protection and direct data export for process documentation Digital display with 13 mm height Resolution 0.001 mm, accuracy ±0.02 mm USB data output for traceability IP54 protection against dust and splash Precision that supports reliable quality control The instrument is a digital depth caliper configured for routine inspection and workshop use. With a measuring range of 0–150 mm it falls into the Standard category, delivering the most practical balance of reach and stiffness for general engineering and metalworking tasks. The combination of a high display resolution (0.001 mm) and an expressed accuracy of ±0.02 mm reduces reading ambiguity and supports repeatable results, which in turn streamlines quality checks and minimises rework. Designed to keep measuring on the shop floor Built for regular handling, the device features IP54 protection to resist dust ingress and splashing fluids during normal workshop operations. The 13 mm display ensures readings remain legible under varied lighting conditions, reducing downtime caused by misreads. This pragmatic construction means fewer interruptions in daily measuring routines and a longer interval between maintenance checks. Integrated data transfer for faster documentation Equipped with USB data output, the caliper enables direct transfer of measurements to spreadsheets or quality-control systems, cutting manual transcription errors and saving administrative time. The digital display together with hosted data export supports traceability in production records and facilitates quicker feedback loops between measuring and machining operations, increasing overall shop-floor efficiency. A versatile choice for standard workshop tasks As a Standard-class instrument, the device is particularly suited to the everyday needs of machine shops and metalworking departments that require a dependable depth measuring tool with straightforward connectivity. The format and feature set provide a useful compromise between compact handling and sufficient reach, making it a practical addition to inspection benches where reproducible, documented measurements are required. For a reliable supply of Microtech Metrology depth calipers and tailored integration help, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for consultancy and order support Technical data Article number: 1432020152 GTIN: 4061905456206 Manufacturer: Microtech Metrology Data output: USB Digital display height: 13 mm Facts Measuring range: 0–150 mm Resolution: 0.001 mm Accuracy: ±0.02 mm Protection class: IP54 Special features Digital readout for direct reading USB data output for traceable transfer High-contrast 13 mm display for clear readings Standard-class caliper suitable for machine and metalwork FAQ How accurate is the depth caliper? The depth caliper from Microtech Metrology (SKU 1432020152) has an accuracy of ±0.02 mm, providing the precision expected for standard workshop inspection tasks. What measuring range does this instrument cover? The measuring range is 0–150 mm, which places the instrument in the Standard category for common machine‑shop and metalworking measurements. Can measurement data be exported directly to a computer? Yes. The caliper provides a USB data output for direct transfer of readings to spreadsheets or quality‑control software, reducing manual entry. Is the instrument suitable for everyday workshop use? Designed with IP54 protection and a clear 13 mm display, it is intended for regular shop‑floor usage where dust and splash resistance and legibility matter. What resolution can be expected from the readout? The digital readout offers a resolution of 0.001 mm, enabling finer visual increments than standard 0.01 mm displays. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Depth Caliper Digital Touchscreen Colour 1.54" IP54 Calibrated ISO 17025 Wireless USB - Microtech Metrology
The combination of ISO 17025 calibration, wireless data transfer and a clear 1.54" colour touchscreen ensures reproducible depth measurements and fast documentation. Choose this calibrated solution for reliable workshop inspection and order via Metav Werkzeuge or contact the consultants for tailored advice. Depth Caliper — Digital depth measuring instrument with 1.54" colour touchscreen and Wireless+USB The Depth Caliper is a digital measuring instrument designed for precise depth determination in general workshop use and quality control, offering traceable calibration and rapid digital data export. ISO 17025 calibration and certificate included Wireless + USB data output for traceable records 1.54" colour touchscreen for clear readings IP54 protection against dust and splash Hand-finished measuring jaws for reliable contact Consistent measurement accuracy for everyday inspection The depth gauge delivers a measured accuracy of 0.015 mm with a display resolution of 0.005 mm, providing the numeric certainty required in production control or incoming inspection. The instrument's digital measuring chain reduces human reading errors typical of mechanical gauges, while the touch display simplifies value reading and mode changes. This combination supports faster decision-making on the shop floor and a higher throughput of verified measurements compared with non-digital tools. Fast, reliable data capture and traceability Equipped with Wireless + USB output, the device enables immediate transfer of measurement values to data-collection systems or spreadsheets for statistical process control. The inclusion of an ISO 17025 calibration certificate at delivery establishes a verifiable baseline and simplifies audit trails; calibration details are recorded and reproducible, supporting quality documentation and reducing administrative effort. These features make the caliper suitable for environments where traceability and digital reporting are priorities. Built for rougher environments and standard workshop lengths Classified in the Standard range for a measuring span of 0–150 mm, the caliper balances reach and rigidity for common workshop tasks. With IP54 protection against dust and splash and hand-finished measuring jaws for precise contact, the unit resists everyday shop influences while maintaining repeatability. The touch display is readable under typical workshop lighting, and the solid build reduces the need for frequent re‑alignment, which benefits routine inspection cycles and production spot checks. Streamlined workflow and compatibility with established toolsets Integration into existing workflows is eased by common digital interfaces and the compact form factor typical of standard calipers. The instrument supports rapid depth checks without complex setup, while the factory ISO 17025 calibration and certificate reduce initial calibration workload for procurement and quality teams. For traceable measurement records and straightforward process documentation the caliper is a practical addition to measuring benches and QA stations. For calibrated, traceable depth measurement from Microtech Metrology, contact Metav Werkzeuge to request the depth caliper with ISO 17025 certificate and integrated Wireless + USB output. Technical data Article number: 1432010157 GTIN: 4061905039058 Brand: Microtech Metrology Data output: Wireless+USB Display: Color 1.54" Touchscreen IP protection: IP 54 Calibration: ISO 17025 certificate included Facts Measuring range: 0–150 mm Display resolution: 0.005 mm Specified accuracy: 0.015 mm Display size: 1.54 inches SKU: 1432010157 ECLASS: 21170344 Special features Digital depth measuring instrument Wireless and USB data interfaces Colour touchscreen operation Hand-finished measuring jaws Delivered with ISO 17025 calibration certificate IP54 splash and dust resistance FAQ Is the caliper delivered with a calibration certificate? Yes. The depth caliper from Microtech Metrology is supplied with an ISO 17025 calibration certificate, so calibration traceability is established at delivery. How are measurement values exported from the instrument? Values can be sent via the device's Wireless + USB interfaces to recording systems or a PC for documentation and SPC workflows. What measuring range and accuracy can be expected? The instrument covers 0–150 mm and is specified with an accuracy of 0.015 mm and a resolution of 0.005 mm, suitable for standard workshop and inspection tasks. Is the device suitable for use at the workshop bench? Yes. With IP54 protection and robust, hand-finished jaws, the caliper is designed to withstand typical workshop conditions while providing repeatable depth measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Depth Caliper E-Ink Display IP54 Calibrated ISO 17025 Certificate - Microtech Metrology
Benefit from precise, repeatable depth measurements thanks to the combination of a low‑power E‑Ink display and delivered ISO 17025 calibration; the instrument covers 0–150 mm with a readability of 0.005 mm and an accuracy of ±0.015 mm for reliable shop‑floor checks. Order directly via Metav Werkzeuge or ask our consultants for application advice. Depth Caliper by Microtech Metrology — E‑Ink display, ISO 17025 The Depth Caliper is a digital depth gauge designed for standard workshop and inspection tasks, offering robust protection and traceable calibration for quality control. E‑Ink display for clear, low‑power reading ISO 17025 calibration certificate included Hand‑finished measuring jaws for repeatability IP54 protection against dust and splashes Consistent precision for everyday shop checks The instrument is classed in the Standard measuring‑range category (best for 100–300 mm tasks) and covers 0–150 mm, delivering a practical balance between reach and rigidity. The combination of a high‑contrast E‑Ink display and a readability of 0.005 mm reduces reading errors and minimises rework, while the stated accuracy of ±0.015 mm provides a clear numerical basis for process decisions. Hand‑finished measuring faces reduce point wear and contribute to repeatable results, so depth checks on assembled components or fixture set‑ups become reproducible and auditable. Built to withstand the workshop environment A protection class of IP54 means the caliper tolerates typical dust exposure and splash‑prone conditions on the shop floor, extending usable life and reducing downtime. The low energy consumption of the E‑Ink display keeps the display legible even after long storage periods without frequent battery changes. Mechanical design choices—such as carefully machined, hand‑finished contact faces—improve stability during measurement and make single‑person operation comfortable when checking bores, shoulders or recess depths. Traceable calibration for quality assurance and documentation Delivered fully calibrated to ISO 17025, the depth caliper includes a formal calibration certificate that supports incoming inspection, first‑piece approval and routine quality audits. This traceability lets the tool be incorporated directly into documented measurement procedures and reduces uncertainty in acceptance decisions. For organisations seeking consistent shop‑floor metrology without complex integration, the calibrated instrument provides a ready‑to‑use solution with clear measurement characteristics and documented conformity. Contact Metav Werkzeuge for tailored advice and supply of Microtech Metrology depth calipers — call +49 2822 7131930 or email info@metav-werkzeuge.com for specification matching and ordering support Technical Data Article number: 1432010158 GTIN: 4061905455315 Manufacturer: Microtech Metrology Facts Measuring range: 0–150 mm Readability: 0.005 mm Accuracy: ±0.015 mm Protection class: IP54 Display type: E‑Ink Special features Hand‑finished measuring jaws Delivered calibrated to ISO 17025 with certificate Digital depth measurement Category: Standard (100–300 mm) FAQ Is the depth caliper delivered with traceable calibration? Yes. The Microtech Metrology depth caliper (SKU 1432010158) is supplied fully calibrated to ISO 17025 and includes the calibration certificate for quality documentation. What are the measurement accuracy and resolution? The instrument features a readability of 0.005 mm and an accuracy of ±0.015 mm, suitable for routine inspection and shop‑floor quality control within its 0–150 mm range. Can the caliper be used reliably on the shop floor? Yes. The IP54 rating and robust construction make it suitable for typical workshop environments where dust and occasional splashes occur. What advantages does the E‑Ink display offer in daily use? The E‑Ink display provides high contrast in varied lighting, very low power consumption and retains the last reading without continuous battery draw, simplifying intermittent measurement tasks. Which applications are appropriate for this depth gauge? It is ideal for depth checks on assemblies, moulds, housings and fixture set‑ups in machine shops and inspection stations where traceable, repeatable depth measurements are required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Depth Digital Caliper Double Hook, Swiss Digit Display IP67 - Microtech Metrology
Take advantage of fast, repeatable depth checks with a Swiss Digit display and IP67 protection; the robust digital readout and fine resolution ensure smoother inspection cycles. Order the depth caliper directly via Metav Werkzeuge or consult our specialists for application advice. Depth Caliper — Digital depth gauge with Swiss Digit display and IP67 protection by Microtech Metrology A Depth Caliper designed for precise depth measurements in workshop and inspection settings, featuring a clear digital readout and sealed construction for dusty or wet environments Swiss Digit display, 11 mm height Measuring range 0–150 mm Accuracy ±0.02 mm IP67 protection Precise measurements for everyday workshop control The measuring span of 0–150 mm classifies this instrument as Standard, making it ideal for the routine demands of machine and metalworking shops where reach, rigidity and single‑hand operation need to be balanced. With a resolution of 0.001 mm and an accuracy of ±0.02 mm, the caliper provides numerical detail that supports tight tolerances without overcomplicating routine checks. Explaining the figures: resolution indicates the smallest increment the display shows, while stated accuracy describes the expected measurement deviation under standard conditions — together they permit confident pass/fail decisions during incoming inspection or process control. Durable design that reduces rework and downtime Sealed to IP67, the unit withstands dust ingress and temporary immersion so measurement capability is retained even in harsher shop‑floor conditions. The Swiss Digit display with its 11 mm character height improves legibility at arm’s length, which speeds up repetitive checks and reduces reading errors. These practical advantages translate directly to fewer interrupted measurement cycles and a steadier production flow, since protected electronics and clear visual feedback minimise the need for repeat measurements. Clear data and fast inspection routines for better throughput A concise digital readout and robust construction streamline depth gauging tasks during assembly, fixture set‑up and quality sampling. The compact form and responsive electronics support quick comparisons against set tolerances, lifting throughput without sacrificing control. Stocked and distributed through Metav’s European quality channel, the instrument benefits from a tested logistics path that prioritises consistency — a practical moral advantage for buyers who prefer transparent supply and predictable availability. Contact Metav Werkzeuge for a specification check or to request a tailored quotation for the Microtech Metrology digital depth caliper Technical data Article number: 1432020153 GTIN: 4061905456282 Manufacturer: Microtech Metrology Facts Measuring range: 0–150 mm Resolution: 0.001 mm Accuracy: ±0.02 mm Display height: 11 mm Protection rating: IP67 Special features Digital readout: Swiss Digit Sealed construction for wet/dusty environments Digital instrument suitable for standard workshop inspection Category: Standard measuring range caliper FAQ What measurement range does the depth caliper cover? The Microtech Metrology depth caliper covers 0–150 mm, placing it in the Standard class suitable for general machine‑shop and metalworking tasks. What resolution and accuracy can be expected? The instrument offers a resolution of 0.001 mm and an accuracy of ±0.02 mm, delivering fine increments on the readout with industrially relevant precision. Is the display readable on the shop floor? Yes. The Swiss Digit display with 11 mm character height provides clear readability during routine checks and speeds up inspection cycles. Can the caliper be used in dusty or wet environments? The caliper is rated IP67, which protects its electronics from dust ingress and temporary immersion, making it robust for many shop‑floor conditions. Is this depth gauge suitable for production control? With its Standard measuring range, fine resolution and sealed design, the Microtech Metrology digital depth gauge is well suited to repetitive production checks and incoming inspection. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Depth Gauge Caliper Digital Swiss Digit 0.001mm Resolution IP67 Wireless, Double Hook - Microtech Metrology
Combining wireless data transfer, IP67 protection and ±0.02 mm accuracy ensures dependable depth measurement in daily production. Benefit from clear readings on the Swiss Digit display and precise 0.001 mm resolution for traceable results — order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Depth Caliper (0–150 mm) by Microtech Metrology — Digital, Wireless, IP67 A Depth Caliper designed for workshop and production use, offering wireless data output and robust IP67 protection for reliable on‑shop performance. Wireless data transfer Robust IP67 protection 0.02 mm measurement accuracy Precise depth measurement that supports quality control The instrument delivers ±0.02 mm accuracy with a fine 0.001 mm resolution, making it suitable for standard workshop metrology and routine quality checks. This level of precision reduces rework and speeds up inspection loops by providing consistently reproducible depth values. The measurement range of 0–150 mm places the tool in the standard class for machine‑shop tasks, offering a practical compromise between reach and rigidity. Clear numerical results on the display simplify pass/fail decisions and minimise interpretation errors during serial measurements. Smooth digital workflow and data integrity Equipped with wireless data output, the device enables direct transfer of measurements into SPC systems or spreadsheet workflows, cutting manual transcription and the associated error risk. The Swiss Digit display (11 mm character height) ensures legible readouts even under strong workshop lighting, while the digital interface supports traceable documentation of inspection routines. Integration into a digital reporting chain improves throughput and allows faster reaction to process trends, delivering a tangible efficiency gain for production lines and inspection benches. Durable design for challenging environments Built to withstand shopfloor conditions, the caliper features IP67 protection, sealing sensitive electronics against dust and temporary immersion. The robust construction ensures stable readings across repeated use and reduces downtime for maintenance. As a standard‑range depth gauge, it is well suited to machining, tooling and assembly checks where both reach and handling comfort matter. The Microtech Metrology electronics combine rapid response with compact ergonomics, offering a dependable measuring solution for everyday industrial tasks. For a practical, wireless depth‑measurement solution from Microtech Metrology, contact Metav Werkzeuge for product availability and tailored technical guidance from our Emmerich site. Technical data Article number: 1432020154 GTIN: 4061905456305 Manufacturer: Microtech Metrology Display: Swiss Digit, character height 11 mm Data output: Wireless Protection rating: IP67 Accuracy: ±0.02 mm Resolution: 0.001 mm Measuring range: 0–150 mm Digital device: Yes Core data Measuring range: 0–150 mm Resolution: 0.001 mm Accuracy: ±0.02 mm Display height: 11 mm Protection class: IP67 Features Wireless data output Swiss Digit display, 11 mm height Digital depth caliper for standard workshop use Standard measurement class (100–300 mm) FAQ What is the measuring range of this caliper? The depth gauge measures from 0 to 150 mm, corresponding to the standard measurement class for workshop metrology. How accurate are the readings? The device provides an accuracy of ±0.02 mm with a resolution of 0.001 mm, suitable for routine quality control. Can measurements be transferred directly to a PC? Yes. Wireless data output allows direct transfer of measurement values into digital systems for logging and analysis. Is the caliper protected against dust and coolant? The unit is rated to IP67, offering protection against dust ingress and temporary immersion in liquids. Which display is fitted and is it easy to read? A Swiss Digit display with 11 mm character height is fitted to ensure clear, legible readings on the shopfloor. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Depth Gauge Digital Touchscreen Nail Tip, Wireless USB, IP54 - Microtech Metrology
Benefit from precise depth measurement, robust IP54 protection and seamless data transfer with wireless and USB outputs; these attributes combine to support consistent quality control and efficient documentation. Order the depth calliper directly via Metav Werkzeuge or ask the consultants for integration advice. Depth calliper with nail point and microcomputer — Digital depth calliper with wireless + USB, Microtech Metrology The depth calliper with nail point and microcomputer is a digital instrument for fast, reliable depth measurement in workshop inspection and assembly tasks. Colour 1.54" touchscreen display Wireless and USB data output IP54 protection against dust and splash Precision ±0.015 mm with 0.005 mm resolution Precise depth readings that improve inspection throughput The instrument delivers ±0.015 mm accuracy, backed by a fine resolution of 0.005 mm, which reduces rework and speeds up decision-making in production. High repeatability is achieved through a responsive 1.54" colour touchscreen, which simplifies visual checks and reduces operator interpretation errors. As a result, routine depth audits and batch inspections become more predictable, enabling measurable improvements in process reliability and traceability. Data capture and workflow integration without compromise Equipped with both wireless and USB data outputs, the calliper transfers measured values directly into measurement logs or SPC systems, cutting manual transcription and the risk of input errors. The integrated microcomputer and touchscreen enable immediate review of readings before export, supporting just-in-time documentation. Combined with the compact digital interface, these connectivity options make the tool suitable for bench inspection as well as mobile quality rounds across the workshop. Built for workshop conditions and practical measurement use Designed for everyday use, the device carries an IP54 rating for splash and dust resistance and a dedicated nail point probe suited to deep-hole depth checks where a flat blade cannot reach. With a measuring range of 0–150 mm, it falls into the Standard class for callipers, offering an optimal balance of reach and rigidity for machine and metalworking applications—particularly at common lengths such as 150 mm. The robust construction and clear display support fast, confident measurements at the point of need. Why this digital depth solution pays off in practice Practical advantages combine: reliable electronic readout for clear pass/fail decisions, flexible data export for quality systems, and a rugged design that tolerates workshop environments. These attributes reduce inspection time and paperwork while improving documentation quality. For workshops seeking to democratise precision measurement, the combination of connectivity, protected design and fine resolution provides a tangible uplift in daily efficiency. For procurement or technical queries regarding the Microtech Metrology depth calliper (SKU 1432030157), contact Metav Werkzeuge in Emmerich to discuss specification matching and order placement. Technical data Article number: 1432030157 GTIN: 4061905452291 Manufacturer: Microtech Metrology Facts Measuring range: 0–150 mm Accuracy: ±0.015 mm Resolution: 0.005 mm Display: Colour 1.54" touchscreen Data output: Wireless, USB Protection class: IP54 Special features Digital depth calliper Nail point for deep-hole measurement Standard class (measuring range 100–300 mm) Microcomputer with touchscreen Wireless data transfer and USB interface FAQ What measurement range does the calliper cover? The depth calliper measures from 0–150 mm, placing it in the Standard class for workshop use (suitable for common inspection tasks). How accurate are the depth readings from the instrument? The device provides an accuracy of ±0.015 mm with a display resolution of 0.005 mm, delivering repeatable depth readings for routine quality control. Which data interfaces are available for exporting measurements? Measurements can be exported via the built-in wireless link or the USB interface, enabling direct transfer to inspection software and data-logging systems. Is the tool suitable for use at the workshop bench? Yes, the calliper features an IP54 protection rating and a robust nail-point probe, making it suitable for bench and light shop-floor inspection duties. Which brand and SKU should be referenced when ordering? Refer to Microtech Metrology depth calliper, SKU 1432030157, in procurement and documentation. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Depth Gauge Digital With Nail Probe Swiss Digit Display IP67, Calibrated ISO 17025 - Microtech Metrology
Reliable precision and robust protection combine to keep inspection cycles predictable: exact readings to ±0.02 mm and a clear Swiss Digit display with 0.01 mm resolution ensure fast decision-making, while IP67 protection preserves functionality in harsh workshop environments. Order the depth caliper directly via Metav Werkzeuge or consult our specialists for tailored advice. Depth caliper — digital depth gauge, IP67 protection, Swiss Digit display by Microtech Metrology Depth caliper for precise depth measurement in machining and inspection, designed as a digital depth gauge for standard workshop use Robust IP67 protection for harsh environments High resolution 0.01 mm display clarity Industrial accuracy of ±0.02 mm Measuring range 0–150 mm, standard size Precision where it counts: dependable metrology on the shop floor Built for consistent measuring performance, the digital depth caliper provides an accuracy of ±0.02 mm and a display resolution of 0.01 mm, enabling reliable pass/fail decisions in routine quality checks. The Swiss Digit display, with an 11 mm digit height, presents measurements at a glance so operators can keep throughput high without sacrificing traceability. These characteristics reduce rework and accelerate inspection loops, offering a measurable efficiency gain for production and maintenance workflows. Designed for the industrial environment and everyday use This instrument is classified in the Standard range (measuring span up to 150 mm), providing the optimal balance of reach and rigidity for general machinery, metalworking and component assembly tasks. The IP67 rating protects electronics from dust and temporary immersion, so readings remain reliable in coolant mist and oily conditions. With a compact, industrial-grade design and clear numeric display, the tool supports long shifts and repeatability — an assurance of lower downtime and predictable inspection results. Faster readings, simpler integration into quality routines The depth caliper simplifies depth measurement tasks such as pocket and bore depths, slot depths and step gauges by delivering instant digital readouts that are easy to record. The pronounced digit height and crisp contrast of the display cut operator error and speed up data capture, improving throughput in quality control. As a digital instrument intended for workshop and inspection benches, it supports standard measurement procedures and can be included in inspection plans as a dependable depth-measuring device. Contact Metav Werkzeuge for expert guidance on the Microtech Metrology depth caliper and to arrange prompt delivery from Emmerich. Technical data Article number: 1432030153 GTIN: 4061905459399 Manufacturer: Microtech Metrology Core specifications Measuring range: 0–150 mm Display resolution: 0.01 mm Accuracy: ±0.02 mm Display height: 11 mm Protection rating: IP67 Special features Digital Swiss Digit display Depth caliper version Category: Digital caliper (depth measurement) ECLASS: 21170344 FAQ What is the measuring range of this depth caliper? The depth caliper from Microtech Metrology covers a measuring range of 0–150 mm (standard range), suitable for common workshop and assembly measurements. What accuracy and display resolution can be expected? The instrument delivers an accuracy of ±0.02 mm with a display resolution of 0.01 mm, shown on a Swiss Digit display with 11 mm digits for quick reading. Is the caliper protected against coolant and dust? Yes, the device carries an IP67 rating, which protects electronics against dust ingress and temporary immersion, maintaining measurement reliability in demanding environments. Can this depth gauge be used for production quality checks? Absolutely — the Microtech Metrology digital depth caliper (SKU 1432030153) is designed for routine inspection tasks and offers consistent readings suitable for shop-floor quality control. Does the unit include manufacturer identification for traceability? Manufacturer details are provided with the product and can be used for traceability and procurement records as required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
150mm Depth Gauge Digital With Nail Tip, Swiss Digit 11mm Display, IP67 Wireless - Microtech Metrology
Take advantage of the combination of reliable 0.02 mm accuracy, IP67 protection and wireless data transfer for smooth inspection routines; order the depth caliper directly via Metav Werkzeuge or consult our specialists for integration advice. Depth Caliper 0–150 mm — digital, wireless, IP67 (Microtech Metrology) A compact digital depth caliper, the Depth Caliper 0–150 mm delivers clear readings and wireless data output for shop‑floor measurement and quality documentation. Swiss Digit 11 mm display for clear readings Wireless data transmission for process integration IP67 dust and water protection for shop‑floor use 0.02 mm accuracy with 0.01 mm resolution Precision that keeps production moving A standard‑range instrument with a measuring span of 0–150 mm, this depth caliper is aimed at everyday workshop and inspection tasks where repeatable results matter. The combination of 0.02 mm stated accuracy and 0.01 mm resolution ensures measurable improvements in quality control compared with coarse gauges, while the Swiss Digit display (11 mm high digits) reduces readout errors on busy benches. The concise electronic measurement output supports traceable data capture and speeds up documentation without complex procedures. Robustness and readiness for the shop floor Built for regular use, the device’s IP67 rating protects electronics against dust ingress and temporary immersion, making it suitable for harsher production environments. The sealed design reduces downtime for maintenance and extends service life, which translates directly into fewer interruptions on the production line. Wireless data transmission allows measurements to be transferred directly into inspection software or data loggers, cutting manual entry and improving process reliability. Practical integration and operator benefits Ergonomics and readability support efficient handling: the clear Swiss Digit readout and compact form factor aid rapid depth checks on components, jigs and assemblies. Wireless connectivity simplifies integration into existing quality workflows, enabling measured values to be centrally logged and reducing administrative overhead. Classified as a Standard caliper by measuring range, it offers a balanced ratio of reach and stiffness that meets the needs of machine shops and metalworking departments without specialised handling. Speak to Metav Werkzeuge about the Microtech Metrology depth caliper with wireless output and IP67 protection for reliable shop‑floor measurement and documented results Technical data Article number: 1432030154 GTIN: 4061905459870 Manufacturer: Microtech Metrology Core measurements Measuring range: 0–150 mm Resolution: 0.01 mm Accuracy: 0.02 mm Features Digital display: Swiss Digit, 11 mm high digits Data output: Wireless IP protection: IP67 Digital instrument FAQ What measuring range does the depth caliper cover? The depth caliper covers a measuring range of 0–150 mm, classified as a Standard range instrument suitable for general machine‑shop and inspection tasks. How precise are the measurements from this instrument? Microtech Metrology’s digital depth caliper offers an accuracy of 0.02 mm with a display resolution of 0.01 mm, providing reliable numerical results for routine quality control. Is the caliper suitable for use at the workbench or in harsher environments? Yes. The caliper is IP67 rated, which protects against dust and temporary immersion, making it appropriate for demanding shop‑floor conditions. Can measurement data be transferred electronically? Yes. The instrument features wireless data transmission for direct transfer of measured values into inspection systems and data loggers, streamlining documentation. Which display does the caliper use and why is it beneficial? The caliper uses a Swiss Digit display with 11 mm high digits, improving readability under workshop lighting and speeding up measurement routines. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Digital Bore Distance Caliper With 5mm Tapered Probe, 60mm Jaw Length, IP64 Protection - Metav IndustryLine
Benefit from reliable centre‑to‑centre measurements with a hardened stainless steel construction and a 0.01 mm digital display; the integrated RB 5 data output speeds documentation. Order the Digital Borehole Distance Caliper M240.291 directly via Metav Werkzeuge or ask the consultants for application advice. Digital Borehole Distance Caliper M240.291 — 150 × 60 mm, 5 mm cone (Metav IndustryLine) A Digital Borehole Distance Caliper M240.291 engineered for precise measurement of bore centre distances in workshop and inspection environments. Digital display with ON/OFF and PRESET Measuring range 5–150 mm Hardened stainless steel construction Delivered in transport case Robust construction for repeatable workshop measurements The instrument combines a hardened stainless steel frame with a compact measuring span of 5–150 mm, classified as a Standard caliper for everyday machine‑shop tasks. The robust material choice ensures resistance to wear and maintains dimensional stability during repeated handling, while the cone tip with a 5 mm diameter enables access to small bore interfaces. With a jaw length of 60 mm and a total weight of 0.5 kg, the device balances stiffness and manoeuvrability, making it suitable for routine quality‑control tasks and assembly‑line checks where consistent readings are essential. Faster readings and straightforward data integration Equipped with a clear digital display and ON/OFF plus PRESET functions, the caliper permits rapid zeroing and immediate readout, reducing cycle time in repetitive measurement work. The instrument offers a display resolution of 0.01 mm, which supports fine discrimination of centre distances without complex interpretation. For traceable data capture, the RB 5 output provides a direct interface to measuring data systems, simplifying documentation and reducing transcription errors during process control. Practical supply and dependable supply chain Delivered in a dedicated transport case, the caliper arrives protected and ready for use on the shop floor. Built to a Werksnorm, the measuring instrument reflects Metav IndustryLine’s focus on reproducible performance across a wide range of industrial applications. Metav’s presence in Emmerich acts as a quality filter for European customers, combining broad product availability with a tested supply chain—advantages that lower procurement risk and ensure steady access to spare and replacement tools when needed. Contact Metav Werkzeuge for tailored advice on the M240.291 and to arrange delivery from Emmerich; consultants are available to discuss integration and application specifics. Technical Data Article number: M240.291 GTIN: 4054469178721 Manufacturer: Metav IndustryLine Facts Measuring range: 5–150 mm Display resolution: 0.01 mm Cone diameter: 5 mm Jaw length: 60 mm Weight: 0.5 kg Customs tariff number: 90173000 Special features Material: stainless steel, fully hardened Digital display with ON/OFF and PRESET Data output: RB 5 Delivery in transport case Norm: Werksnorm eClass: 21170344 FAQ What measuring range does the caliper cover? The caliper covers a measuring range of 5–150 mm, making it a standard‑range instrument for general machine‑shop and inspection tasks. What resolution is available on the display? The digital readout provides a resolution of 0.01 mm, enabling clear, repeatable measurements for centre‑to‑centre checks. Is the instrument suitable for repeated workshop use? Yes, the fully hardened stainless steel construction and compact design ensure durability and repeatability under routine workshop conditions. How can measured data be exported? Measured values can be transmitted via the RB 5 data output for direct logging into a data collection system or inspection software. Does the delivery include protective packaging? The product is supplied in a transport case, protecting the instrument during shipping and making it convenient to store between uses. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper 35mm Extra-Long Tips 0.01mm Resolution Four-Function Measurement, Supplied In Case - Metav IndustryLine
Combine 0.01 mm digital resolution with hardened stainless steel construction and extra‑long 35 mm jaws to achieve consistent, workshop‑grade measurements; order the calibrated‑ready tool directly via Metav Werkzeuge or consult Metav’s advisors for application guidance. Digital caliper 150 mm – extra‑long 35 mm jaws, 0.01 mm display (Metav IndustryLine) Digital caliper 150 mm — a compact, robust precision caliper for standard workshop and quality‑control tasks, offering extended jaw reach for recessed features and reliable data output. Digital display with 0.01 mm resolution Extra‑long 35 mm measurement tips Hardened stainless steel construction Four measurement functions incl. depth and step Precise, reliable measurements for daily workshop use The caliper delivers a 0.01 mm display resolution, making it suitable for routine inspection and process control where repeatability matters. The hardened stainless steel frame and metal housing resist wear, keeping the measuring faces stable during repeated use. With a compact 150 mm measuring range the instrument matches the standard class for workshop calipers, balancing reach, stiffness and single‑hand operation — a practical choice for mechanical workshops and production benches. The integrated digital display supports fast readings and reduces interpretation errors compared to non‑digital scales. Extended reach and versatile measurement capability Equipped with 35 mm extra‑long measuring tips and a longer jaw profile, the caliper is designed to access deep grooves and recessed features that short‑jaw models cannot. The tool supports four measurement functions — external, internal, depth and step — enabling a broad range of tasks with one instrument and cutting setup time. The device includes on/off, zeroing, unit selection and hold functions on the display, which improves efficiency during repetitive checks and when transferring mid‑process values to documentation. Data output and workshop integration for traceable workflows A dedicated RB 5 data output enables straightforward transfer of measurements to inspection software or data collection systems, supporting digital quality records. The caliper runs on a 3 V supply and remains lightweight at around 0.45 kg, which aids handheld operation over long shifts. Supplied to factory standard, the instrument is built for dependability in production environments and fits naturally into established inspection routines, enhancing throughput while maintaining measurement integrity. For applications requiring dependable, workshop‑grade precision, contact Metav Werkzeuge to discuss the Metav IndustryLine digital caliper with extra‑long jaws or request tailored advice from our Emmerich team via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M240.011.N GTIN: 4054469160269 eClass: 21170344 Manufacturer: Metav IndustryLine Facts Measuring range: 0–150 mm Resolution: 0.01 mm / 0.0005 in Weight: 0.45 kg Jaw lengths: 40/35 mm Supply voltage: 3 V Special features Material: hardened stainless steel, metal housing Digital display with ON/OFF, ZERO, UNIT and HOLD Four measurement functions: external, internal, depth, step Data output: RB 5 Label: Factory standard Suitable for standard workshop and quality control applications FAQ What measurement range does the caliper cover? The caliper covers a measuring range of 0–150 mm, placing it in the standard class for general workshop tasks. What resolution and display options are available? The instrument offers a digital 0.01 mm resolution and an inch reading of 0.0005 in, selectable via the UNIT button on the display. Can this caliper measure depth and steps as well as external sizes? Yes — the device supports four measurement modes: external, internal, depth and step measurements. Is there a data interface for recording measurements? Yes — the caliper provides an RB 5 data output for transfer to inspection systems or data loggers. What is the construction and durability of the caliper? Constructed from hardened stainless steel with a metal housing, the caliper is designed for robust, frequent workshop use. Is the instrument supplied ready for use from stock? The tool is supplied to factory standard and includes the features listed; please contact Metav Werkzeuge for details on calibration options. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper 40mm Jaw Depth With Ø5mm Probe Mount, Preset, Stainless Steel, Supplied In Case - Metav IndustryLine
Taking advantage of the combination of robust stainless housing, a 0–150 mm measuring range and the convenience of preset zeroing plus seven pairs of gauge inserts ensures consistent workshop throughput and flexible inspection capability; order directly via Metav Werkzeuge or consult our specialists for integration advice. Digital Uni‑MS 150 mm Precision Caliper — stainless steel, bore Ø 5 mm, preset function (Metav IndustryLine) Digital Uni‑MS 150 mm Precision Caliper is a compact digital measuring instrument designed for standard workshop metrology tasks where repeatable internal and external checks are required; the integral holder for Ø 5 mm gauge inserts extends application flexibility. Digital display with preset function Stainless steel housing for longevity Includes 7 pairs of gauge inserts Measuring range 0–150 mm standard class Reliable measurements for everyday workshop tasks This instrument is built for the standard workshop bracket: a 0–150 mm measuring range paired with a display resolution of 0.01 mm provides a practical balance of reach and fineness for machining and assembly controls. Digital calipers in this class typically adhere to industry tolerances (for reference: around ±0.02 mm up to 100 mm and ±0.03 mm up to 300 mm), which makes the device suitable for routine quality control, setup work and serial checks. The clear digital display and the preset function accelerate repetitive tasks and reduce operator-induced variation, supporting a measurable increase in throughput. Quick setup and flexible gauging for small runs and fixtures Equipped with a preset (SET/PRESET) function and delivered with 7 pairs of gauge inserts, the instrument allows fast changeover between gauge sizes without ad hoc adjustments. The supplied holder accepts probes or inserts via a Ø 5 mm mounting, enabling dedicated internal probing or fixture-based measurements. This configuration shortens cycle times in inspection routines and simplifies adaptation to different part geometries, turning a single measuring tool into a multi‑purpose gauge for both in‑process checks and bench inspection. Robust design, simple power and seamless data transfer A metal housing constructed for workshop environments ensures long service life and resistance to handling wear; at approximately 0.5 kg the instrument is portable yet stable during measurement. Operation runs from a 3 V power source and the unit offers a RB 5 data output for connection to digital readout or data logging systems, permitting traceable measurement records and straightforward integration into existing documentation routines. The device is supplied to factory standard (Werksnorm) and benefits technicians who prioritise dependable, easy‑to‑use measuring equipment. Contact Metav Werkzeuge for tailored advice on integrating the Digital Uni‑MS 150 mm precision caliper into production workflows and to confirm delivery and availability from Emmerich. Technical Data Article number: M240.207.N GTIN: 4054469160016 Tariff number: 90173000 Facts Measuring range: 0–150 mm Resolution: 0.01 mm Weight: 0.5 kg Power supply: 3 V Special features Metal housing (INOX / stainless steel) Preset function with ON/OFF and SET/PRESET buttons Holder for gauge inserts Ø 5 mm Includes 7 pairs of gauge inserts Data output: RB 5 Factory standard (Werksnorm) Digital display FAQ What measuring range and resolution does the instrument offer? The Digital Uni‑MS 150 mm precision caliper from Metav IndustryLine covers 0–150 mm with a display resolution of 0.01 mm, suited to typical workshop inspection tasks. Are gauge inserts included with the caliper? Yes, delivery includes seven pairs of gauge inserts and a Ø 5 mm holder for quick fitting of the supplied probes. How is the caliper powered and can it export measurements? The instrument runs on a 3 V supply and provides an RB 5 data output for connection to readout or data‑logging systems. Is the housing corrosion resistant for workshop use? The caliper features an INOX stainless steel housing that improves resistance to workshop wear and corrosion. Is the instrument delivered with a calibration certificate? The unit is supplied to factory standard (Werksnorm); specific calibration certificates are not indicated with this item Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper Double-Tip Probes 0.01mm Resolution, Data Output RB5, Plastic Case - Metav IndustryLine
Combining 0.01 mm resolution, double‑tipped jaws and a hardened stainless‑steel frame delivers dependable, repeatable measurements for workshop and quality‑control tasks; order the M240.010.N directly via Metav Werkzeuge or ask our consultants if needed. M240.010.N — Digital caliper 150 mm, double‑tipped, stainless steel (Metav IndustryLine) The M240.010.N is a precision digital caliper with double tips and a 150 mm measuring range, designed for accurate inside, outside, depth and step measurements in workshop, inspection and production environments. Digital display 0.01 mm resolution Double‑tipped jaws for narrow features Hardened stainless steel with metal housing Four measurement functions: inside/outside/depth/step Precision and measurable confidence for routine inspection The instrument provides a resolution of 0.01 mm (0.0005 in), which places it within the standard digital caliper class for machine‑shop measurement. This resolution, combined with a robust measuring system powered by 3 V, enables clear numeric read‑outs for pass/fail checks and dimensional documentation. The double‑tipped jaws allow access to confined or narrow features that single‑ended calipers cannot reach, so measurements of bores, grooves or slim edges are recorded with the same repeatability as external dimensions. The result is a reliable metrology tool that reduces rework and supports quality assurance processes through consistent, verifiable data. Features that increase throughput and traceability Equipped with an easy‑to‑use digital display and function keys (ON/OFF, ZERO, UNIT, HOLD), the caliper simplifies measurement routines and reduces operator time per inspection. The HOLD function secures the reading for transfer tasks; the ZERO and UNIT keys speed comparative measurements and metric/imperial switching. An integrated RB 5 data output is provided for measurement data capture and process logging, enabling quick transfer to inspection software or manual records that streamline traceability and reporting. These design choices support productivity and a clear audit trail in production and quality departments. Robust construction tailored to workshop conditions Manufactured from hardened stainless steel with a metal case, the caliper resists wear and maintains jaw geometry under frequent use, which safeguards measurement accuracy over time. The instrument’s mass (0.58 kg) contributes to stable handling without compromising portability for bench or on‑machine inspections. As a standard‑range caliper (0–150 mm), it balances reach and stiffness for general machine‑shop and metalworking tasks, offering the workshop a versatile primary measuring tool. For operations that require multiple measurement types in a single instrument, the built‑in capability for inside, outside, depth and step measurements reduces tool changeovers and simplifies fixture setups. Integration and usability in industrial workflows The numeric clarity of the display and the option to hold or zero readings make the caliper practical for repetitive quality checks, while the RB 5 data output supports digital collection and statistical process control. The device is suitable for incoming inspection, first‑article checks and shop‑floor verifications where consistent documentation is required. Caliper operation is straightforward enough for trained technicians and precise enough for use as a benchmark against which other hand tools are compared, helping to maintain overall measurement confidence across the production line. For reliable, everyday precision choose the Metav IndustryLine caliper M240.010.N — order through Metav Werkzeuge or consult the Metav team for specification advice and integration options. Technical data Article number: M240.010.N GTIN: 4054469160252 Manufacturer: Metav IndustryLine Core figures Measuring range: 0–150 mm Resolution: 0.01 mm (0.0005 in) Weight: 0.58 kg Power supply: 3 V Special features Material: hardened stainless steel, metal housing Display functions: ON/OFF, ZERO, UNIT, HOLD Data output: RB 5 Measurement types: inside, outside, depth, step FAQ What measuring range does this caliper cover? The caliper covers 0–150 mm and is classified as a standard‑range instrument suitable for general machine‑shop and metalworking tasks; the M240.010.N supports most everyday inspection needs. Can this instrument measure internal and external dimensions? Yes. The double‑tipped jaw geometry and the device’s design enable inside and outside measurements as well as depth and step readings, providing four measurement functions in one tool. How precise is the digital display on the caliper? The display shows readings to 0.01 mm (0.0005 in), which is the standard resolution for digital calipers used in workshop inspection and quality control. Is data capture possible from the caliper? Yes. The caliper is equipped with an RB 5 data output for connection to data collection systems or inspection software to support traceability and reporting. What materials and construction ensure longevity? The caliper is constructed from hardened stainless steel with a metal housing, providing durability and maintaining jaw geometry under regular shop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper For Wall Thickness Measurement With 0.01mm Resolution, Stainless Steel Body, Supplied In Case - Metav IndustryLine
Take advantage of precise digital measurement, robust hardened stainless steel construction and a practical 4–150 mm measuring range for reliable wall‑thickness checks across workshop and production environments. Order the instrument directly via Metav Werkzeuge or consult Metav’s advisors for specification support. Digital Caliper for Wall Thickness Measurement M240.071.N – 4–150 mm, stainless steel (Metav IndustryLine) The Digital Caliper for Wall Thickness Measurement M240.071.N is a compact, workshop‑grade instrument intended for precise thickness checks on pipes, tubes and thin‑walled components using a clear digital readout. Measuring range 4–150 mm Resolution 0.01 mm (0.0005 in) Hardened stainless steel construction Accurate wall‑thickness readings for routine inspection Built around a fine 0.01 mm display step, the caliper delivers repeatable digital readings suitable for standard quality control and production tasks. The instrument records measurements in both metric and imperial units, with the inch equivalent shown as 0.0005 in, enabling straightforward comparison with legacy documentation. The clear electronic display includes ON/OFF, ZERO, UNIT and HOLD functions for efficient part sampling and interim value capture. For wall‑thickness inspection tasks where throughput and comparability matter, the electrical readout and compact jaw geometry support rapid, verifiable checks without compromising readability. Built to withstand workshop conditions The frame and sliding parts are manufactured from hardened stainless steel and housed in a metal enclosure to resist wear and maintain measurement stability. Classified within the Standard measuring range (best for universal machine‑shop needs), the instrument balances reach and stiffness for everyday use at 150 mm. A transport protective case is provided to simplify handling and to protect the tool during transfer between workstations; this contributes to long‑term dimensional stability and reduced risk of damage when stored or moved on the shop floor. Fast readings and traceable data for quality workflows Practical features include a modest mass of 0.48 kg and a jaw length of 45 mm, which together aid steady handling while measuring curved or thin sections. The caliper is powered by a 3 V cell and offers a data interface labelled RB 5 for integration into documentation workflows where digital output is required. The combination of a concise display increment and an exportable signal enhances repeatability and supports traceable measurement routines in small‑series production or incoming inspection. Wherever reproducible checks are needed, the instrument provides the core functions that streamline measurement logging and decision making. Contact Metav Werkzeuge for tailored advice on the Metav IndustryLine digital caliper M240.071.N and to discuss delivery and configuration options via Metav Werkzeuge GmbH in Emmerich. Technical data Article number: M240.071.N GTIN: 4054469160368 Customs tariff number: 90173000 Facts Measuring range: 4–150 mm Resolution: 0.01 mm / 0.0005 in Weight: 0.48 kg Jaw length: 45 mm Special features Material: hardened stainless steel, metal housing Display functions: ON/OFF, ZERO, UNIT, HOLD Power: 3 V Interface: RB 5 Delivery: protective transport case included Digital display FAQ Is this caliper suitable for measuring pipe wall thickness? The Metav IndustryLine digital caliper M240.071.N is designed specifically for wall‑thickness checks and is suitable for pipes and thin‑walled components within its 4–150 mm range. What is the display resolution and how is it shown? Resolution is 0.01 mm, shown on the digital display; the inch equivalent 0.0005 in is available when switching units on the instrument. Does the instrument include a protective case for transport? Yes, the caliper is delivered in a protective transport case to reduce the risk of damage during handling and transit. Can measurement data be exported to a computer or logger? The instrument provides an RB 5 data output interface for integration into documentation workflows where required. What power source does the caliper use and how long does it typically last? The caliper operates from a 3 V cell; battery life depends on usage and power‑saving behaviour of the display. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision where standard calipers reach their limits
Specialised calipers (also available as specialist calipers and precision calipers) are engineered for measurements that conventional calipers cannot perform reliably. With custom‑shaped jaws, extended measuring ranges and advanced materials, these tools deliver reproducible results down to the micrometre range, making them indispensable for difficult‑to‑access features such as fine grooves, deep bores and complex contours.
How these calipers tackle demanding measurement tasks
Specialised calipers work by adapting jaw geometry and sensing technology to the application: pointed, blade‑shaped, round or offset jaws capture inside and outside dimensions in confined geometries, while digital, analogue and inductive sensing cover different shop and lab requirements. Digital variants offer quick readouts and data transfer via Bluetooth/USB; analogue models remain reliable in humid or rough workshop environments; inductive versions provide extreme accuracy of ±0.001 mm (1 μm), suited to inspection rooms and laboratories. Wear‑resistant materials such as carbide or ceramic tips withstand coolants, abrasion and corrosion for sustained accuracy.
Measurable benefits for production and inspection
- Faster, repeatable measurements in constrained geometries, reducing inspection time.
- Reproducible results to the micrometre range, raising process reliability.
- Longer service life thanks to carbide or ceramic tips, lowering tool replacement frequency.
- Seamless data integration: digital specialised calipers can feed results directly into CAQ systems via Bluetooth/USB, supporting inline quality control.
- Robust performance across environments—from workshop floors to clean labs—thanks to analogue and inductive options.
Metav as a dependable partner for precision measurement
Metav combines decades of expertise with a comprehensive selection for industry, craft and trade. From Emmerich, Metav operates as a quality filter for the European market, supplying high‑precision tools across more than 250,000 product lines. Trusted by over 48,000 customers, Metav makes high accuracy accessible to every workshop while ensuring reliable fulfilment and consistent product quality.
FAQ
What accuracy can I expect from specialised calipers?
Inductive specialised calipers achieve extreme accuracy of ±0.001 mm (1 μm); digital models enable quick readout and transfer, while analogue versions provide reliable shop‑floor stability.
Which jaw shapes are available and what are they best for?
Specialised calipers come with pointed, blade‑shaped, round and offset jaws designed to measure features such as wall thickness of glass ampoules, gear tooth profiles and O‑ring grooves that standard calipers cannot access.
Can specialised calipers be used for inline quality control?
Yes. Digital specialised calipers with Bluetooth/USB support direct data transfer to CAQ systems, enabling inline testing and automated documentation in series production.
Are there variants suited to harsh workshop environments?
Analogue specialised calipers are less sensitive to moisture and rough handling, and units fitted with carbide or ceramic tips resist coolants, abrasion and corrosion for durable, accurate performance.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com