Precision specialist calipers for inaccessible measurements
Specialist calipers are engineered to measure fine grooves, deep bores and complex contours with reproducible accuracy down to the micrometre, delivering reliable results where standard calipers reach their limits. Designed with customised jaw shapes and robust materials such as carbide or ceramic tips, these calipers excel in measuring thin-walled aerospace structures, medical implants and intricate toolroom cavities while resisting coolants and abrasion. Available as digital, analogue and inductive variants, they offer options from quick-read displays and data transfer to extreme accuracy of ±0.001 mm for laboratory use. By combining tailored jaw geometries with durable construction, these precision tools improve inline quality control and support both prototype and series production.
150mm Digital Precision Caliper With Long Inside Measuring Tips, IP54, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of ISO 17025 calibration with certificate, robust IP54 protection and long internal measuring tips for reproducible shop‑floor measurements. Order the calibrated digital caliper directly via Metav Werkzeuge or ask our consultants if needed. Digital caliper — Microtech Metrology (long internal measuring tips, IP54) Digital caliper for precise workshop and inspection use with extended internal‑measurement jaws and splash protection High-precision digital display 0.01 mm ISO 17025 calibrated with certificate IP54 splash and dust protection Long tips for secure internal measurements Precision and traceability for routine inspection The calibrated instrument delivers a reliable measurement chain thanks to its ISO 17025 calibration and supplied certificate, which ensures traceability for quality control procedures. With a measuring range of 0–150 mm classified as Standard, the device balances reach and rigidity for everyday machine‑shop tasks. The electronic readout offers a resolution of 0.01 mm, while the specified accuracy of ±0.03 mm matches expectations for calipers in this range, so measured data can be used with confidence in production documentation. Robust design that suits the workshop environment Built for regular use on the shop floor, the slider is self‑lubricating and the unit meets IP54 for splash and dust resistance, reducing the risk of downtime due to contamination. The display is easy to read with an 11 mm digit height, supporting rapid checks under overhead lighting. Handmade measuring jaws and the longer tip geometry (40 / 41.5 mm) provide a firmer contact when taking internal dimensions, lowering measurement scatter and improving repeatability for bore and recess checks. Practical benefits and ease of integration The compact electronic format allows immediate digitised readings for faster process checks and reduced transcription errors. The combination of robust mechanical design and clear electronics shortens inspection cycles and streamlines quality routines. As a Standard‑range caliper it is ideal for benchwork and fixture checks where both reach and stiffness matter; the calibrated status simplifies incoming inspection and audits by providing documented accuracy from the first use. Contact Metav Werkzeuge for tailored advice on the calibrated Microtech Metrology digital caliper and to arrange purchase or further technical data Technical data Article number: 141130151 GTIN: 4061905036330 Manufacturer: Microtech Metrology Digital display height: 11 mm Protection class: IP54 Dimensions & accuracy Measuring range: 0–150 mm Resolution (display): 0.01 mm Accuracy: ±0.03 mm Measuring tip length: 40 / 41.5 mm Features ISO 17025 calibrated — calibration certificate included Handmade measuring jaws Self‑lubricating slide system Long tips for internal measurements Digital caliper (electronic readout) FAQ Is the instrument delivered calibrated to a recognised standard? Yes. The Microtech Metrology digital caliper is delivered fully calibrated to ISO 17025 and includes the calibration certificate with the shipment. What are the resolution and stated accuracy for the 0–150 mm range? The electronic readout provides a 0.01 mm resolution and the caliper specification lists an accuracy of ±0.03 mm for the 0–150 mm measuring range. Can the caliper be used in a busy workshop environment? Yes. The device offers IP54 protection against dust and splashes and a rugged, self‑lubricating slide designed for frequent use on the shop floor. Are the jaws suitable for internal dimension measurement? The extended measuring tips (40 / 41.5 mm) and handmade measuring jaws give improved stability and contact when measuring internal diameters and recesses. Which model identifier should be quoted when ordering? Please refer to SKU 141130151 when enquiring about the calibrated Microtech Metrology digital caliper. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Digital Precision Caliper With Long Internal Measuring Probes, IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of a robust inspection tool that combines IP67 protection, precise ±0.03 mm accuracy and wireless data transfer for efficient quality control. Supplied fully calibrated to ISO 17025 with certificate, the instrument ensures traceability and immediate integration into digital workflows — order directly via Metav Werkzeuge or contact our consultants for specification support. Digital Caliper (0–150 mm) by Microtech Metrology — IP67, Wireless data The Digital Caliper is a workshop-grade measuring instrument for general machine‑shop and quality‑control tasks, designed for reliable external and internal measurements across the standard 0–150 mm range. IP67 dust and water protection Delivered calibrated to ISO 17025 Wireless data output for SPC integration Swiss Digit display, 11 mm height Reliable measurements for everyday workshop control This instrument addresses routine dimensional checks by combining a measuring range of 0–150 mm with a resolution of 0.01 mm and an accuracy of ±0.03 mm, which corresponds to standard expectations for digital calipers used in mechanical engineering and shopfloor quality checks. The comparatively large Swiss Digit display (11 mm height) improves read‑out speed and reduces interpretation errors, supporting faster decision cycles on the production line. The component is classified in the Standard caliper category, offering the best compromise between reach, stiffness and one‑hand usability for typical 150/200/300 mm workshop baselines. Durable build and seamless data capture for efficient processes Rated IP67, the instrument withstands chips, coolant splash and brief immersion — a clear benefit for demanding shop environments where contamination and moisture are common. The built‑in wireless data output simplifies capture of measurement results, cutting manual transcription and enabling direct transfer to SPC systems or inspection software. That reduction in administrative steps accelerates process control and reduces the risk of data entry errors, delivering a measurable productivity gain in inspection routines. Traceability and conformity for professional quality assurance The caliper is supplied fully calibrated according to ISO 17025, including a calibration certificate that documents traceability and measurement uncertainty — essential for accredited inspection and internal quality records. This formal calibration step gives purchasing departments and QC teams confidence that the instrument meets reproducible standards from day one and can be integrated into audit‑ready measurement programmes. The combination of traceable calibration and wireless data capability makes the tool suitable for shops that expect consistent documentation and long‑term data logging. Contact Metav Werkzeuge for a technical consultation or a tailored supply proposal for the Microtech Metrology digital caliper (SKU 141130154) and its wireless integration — our specialists in Emmerich will advise on compatibility with existing inspection systems. Technical data Article number: 141130154 GTIN: 4061905452406 Brand: Microtech Metrology EClass: 21170344 Facts Measuring range: 0–150 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Display height: 11 mm Protection class: IP67 Special features Wireless data output Digital display: Swiss Digit (11 mm) Supplied calibrated to ISO 17025 with certificate Category: Standard caliper (0–300 mm) SKU: 141130154 GTIN: 4061905452406 FAQ How accurate is the device for routine quality checks? The Digital Caliper from Microtech Metrology offers an accuracy of ±0.03 mm and a resolution of 0.01 mm, suitable for standard workshop and machine‑shop inspection tasks. Does the caliper come with a calibration certificate? Yes — the instrument is delivered fully calibrated to ISO 17025 and includes the calibration certificate for traceability and documentation. Can measurement data be exported directly to inspection software? Wireless data output allows the caliper to transmit readings for integration into SPC systems and inspection software, reducing manual transfer steps. Is the caliper robust enough for use at the machine? With an IP67 rating, the caliper is protected against dust ingress and temporary immersion, making it suitable for shopfloor conditions with coolant splash and debris. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Digital Precision Caliper With Offset Jaws, 13mm Display, ISO 17025 Calibration, IP54, USB Data Output - Microtech Metrology
Take advantage of ISO 17025 traceability and a USB data output for seamless quality documentation; the combination of workshop‑grade robustness and calibrated accuracy keeps production checks reliable and efficient. Order the Microtech Metrology precision caliper directly via Metav Werkzeuge or consult Metav's specialists for application advice. Microtech Metrology Precision Caliper with Offset Jaws — 150 mm, USB data output The Microtech Metrology Precision Caliper with offset jaws is a 150 mm digital caliper for workshop and quality‑control use, offering IP54 protection and a USB interface for direct data capture. ISO 17025-calibrated with certificate USB data output for direct logging IP54 splash and dust protection 13 mm high-contrast digital display Calibrated measurement for traceable quality control Delivered fully calibrated to ISO 17025 standards, this digital caliper arrives with a calibration certificate, enabling immediate use in regulated inspection routines and documented quality checks. The calibrated delivery removes ambiguity over measurement validity, which is particularly important for internal audits or customer inspections. The combination of certified accuracy and workshop durability supports repeatable results across production batches and reduces the need for time‑consuming external verification. Accuracy and resolution tuned to workshop needs Engineered as a Standard (100–300 mm) caliper, this gauge balances reach and stiffness for everyday machining and metrology tasks. The 0.01 mm display resolution and stated accuracy of ±0.03 mm make it suitable for routine quality control in metalworking and general engineering. These specifications translate into measurable benefits: reliable part acceptance decisions, fewer rework cycles and smoother production flow. Technical terms: resolution refers to the smallest increment shown on the display; accuracy denotes the maximum deviation expected under normal use. Robust design that simplifies tricky measurements The offset jaw geometry (jaw lengths 110/40 mm) provides improved access to stepped profiles and recessed features without awkward handling, while a 13 mm high‑contrast digital display remains readable at working distance. The caliper’s IP54 rating guards against workshop dust and splashwater, extending service life in demanding environments. These design choices minimise handling complexity and help technicians perform faster, more confident measurements on components and assemblies. Data workflow integration to reduce transcription errors Equipped with USB data output, the instrument supports direct transfer of readings into spreadsheets and inspection software, reducing manual entry errors and speeding up reporting cycles. The 150 mm measuring range and digital interface make this caliper a practical tool for inline sampling and batch documentation. Microtech Metrology’s digital gauge is therefore well suited to workshops and small labs seeking a dependable, connected measuring solution that dovetails with existing quality processes. For traceable, connected measurement solutions ask Metav Werkzeuge about the Microtech Metrology precision caliper with ISO 17025 calibration and USB output — Metav Werkzeuge in Emmerich can advise on suitability and deliver directly to the workshop. Technical Data Article number: 141740150 GTIN: 4061905457340 Manufacturer: Microtech Metrology IP rating: IP54 Interface: USB Facts Measuring range: 0–150 mm Resolution (display): 0.01 mm Stated accuracy: ±0.03 mm Display height: 13 mm Special features Digital caliper, offset jaws 110/40 mm ISO 17025 calibration with certificate Designed for workshop and quality control Category: Digital caliper FAQ Is the tool delivered calibrated? Yes. The Microtech Metrology precision caliper (SKU 141740150) is delivered fully calibrated and includes an ISO 17025 calibration certificate. What measurement resolution and accuracy can be expected? The instrument displays readings at 0.01 mm resolution and is specified with an accuracy of ±0.03 mm, suitable for standard workshop quality control. Can measurement data be exported directly to a PC? Yes. Readings can be exported via the USB data output for direct capture into spreadsheets or inspection software. Is the caliper suitable for dusty or damp workshop conditions? The caliper carries an IP54 rating, providing protection against dust ingress and splashing water typical of workshop environments. What makes the offset jaws useful? Offset jaws (110/40 mm) improve access to stepped or recessed features, enabling easier and more repeatable measurements on complex profiles. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Digital Precision Caliper With Offset Jaws, Swiss Digit Display 11mm, Wireless, IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of a compact, certified measuring instrument that combines ISO 17025 calibration, wireless data output and an IP67 rating for reliable workshop use; order directly via Metav Werkzeuge or contact the consultants for application advice. Digital Caliper 0–150 mm — Microtech Metrology, wireless, IP67 A Digital Caliper 0–150 mm designed for industrial measurement tasks and workshop quality control, providing certified precision and easy data transfer for production environments ISO 17025 calibrated with certificate Wireless data output for digital recording IP67-rated protection against dust and water Swiss Digit 11 mm display for clear readouts Certified precision for reliable quality control This instrument delivers certified accuracy for everyday inspection tasks: with a measuring range of 0–150 mm, a resolution of 0.01 mm and an accuracy of ±0.03 mm, the caliper meets the demands of machine and metalwork quality control. The included ISO 17025 calibration and accompanying certificate document traceability and allow immediate use in QA procedures. Stated tolerances provide a clear base for decision-making in incoming inspection and in-process checks, reducing uncertainty and rework. Streamlined data capture to speed up workflows Equipped with wireless data output, the caliper eliminates manual transcription and accelerates recording into measurement systems or spreadsheets. The large Swiss Digit 11 mm display ensures quick visual checks on the shop floor, while wireless transfer reduces errors and supports traceable data collection in production runs. The combination of clear readouts and direct data export improves throughput in repetitive measuring tasks and simplifies integration into digital quality workflows. Robust build that suits daily workshop demands Protected to IP67, the instrument tolerates dust exposure and temporary immersion, making it suited to busy workshop conditions where coolant mist or chips are present. The compact, standard-range form balances reach and stiffness — classified as a standard caliper — which is ideal for typical workshop components and fixtures. The digital mechanics and sealed electronics reduce downtime and maintenance needs, delivering stable performance over extended use. Practical advantages for procurement and use The instrument supports fast inspection cycles thanks to its clear display and reliable wireless link; its measured accuracy and calibration status provide a defensible basis for quality records. For operations that require documented traceability, the supplied calibration certificate streamlines compliance with internal and external audit requirements. The caliper is therefore a practical choice where measured data must be both reliable and easily transferred into production reporting. Contact Metav Werkzeuge for certified measuring equipment from Microtech Metrology — request the ISO 17025 certificate and wireless integration options for a seamless quality-control setup Technical data Article number: 141740154 GTIN: 4061905457753 Manufacturer: Microtech Metrology Facts Measuring range: 0–150 mm Resolution (display): 0.01 mm Accuracy: ±0.03 mm Display height: 11 mm Protection class: IP67 Special features Digital display Swiss Digit 11 mm Wireless data output ISO 17025 calibration with certificate Standard caliper category (0–150 mm) FAQ Is the caliper delivered with a calibration certificate? Yes. The Microtech Metrology digital caliper is supplied fully calibrated to ISO 17025 and includes the corresponding calibration certificate for traceability. How is measurement data transferred from the instrument? Data is transmitted via the wireless output; the digital caliper supports direct digital recording to compatible data-collection systems. What does the IP67 rating mean for daily use? An IP67 rating indicates the instrument is protected against dust ingress and can withstand temporary immersion, making it suitable for typical workshop environments. Is the display easy to read on the shop floor? The Swiss Digit display with an 11 mm height provides high-contrast numerals for improved legibility during fast inspection tasks. Which inspection range classification applies to this caliper? With a 0–150 mm range, the instrument falls into the standard class, offering a practical balance between reach and rigidity for general machine-shop measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Digital Precision Caliper With Small Inside Jaws, Swiss Digit Display 11mm, IP67 - Microtech Metrology
The combination of robust ingress protection, workshop-grade measuring force control and a clear Swiss Digit display delivers reliable, repeatable readings for everyday quality checks. Benefit from a 0–150 mm measuring range and 0.02 mm accuracy that support fast decision-making on the shop floor. Order or request specification advice via Metav Werkzeuge for seamless procurement and delivery. Microtech Metrology Digital Caliper — 0–150 mm, IP67 The Microtech Metrology digital caliper is a workshop-ready measuring instrument designed for precise internal and external measurements across general machine‑building and metalworking tasks. *Digital Swiss Digit display, 11 mm height *IP67 protection for workshop use *0–150 mm range, 0.02 mm accuracy *Dual measuring force for consistent results Robust precision for everyday quality control Designed for the common requirements of machining and maintenance, this instrument offers precision where it matters most. The 0–150 mm range places the caliper firmly in the Standard range category, giving the best balance between reach and rigidity for routine component checks. With an indicated accuracy of 0.02 mm and a display resolution of 0.01 mm, measurements are both comparative and actionable, reducing rework and inspection time. The sturdy construction and clear readout support repeatable results in serial checks, incoming goods inspection and fixture set‑up. Clear readouts and dependable handling in harsh conditions A high‑contrast Swiss Digit display with an 11 mm digit height ensures readings are legible at a glance, accelerating throughput in busy environments. The IP67 rating protects the electronics from dust and temporary immersion, making the tool suitable for workshop bays and production cells. Small, dedicated measuring jaws improve access for narrow interior features, while dual measuring force (external 8 N / internal 4 N) reduces variation caused by operator pressure, improving consistency across multiple operators and shifts. Integration into inspection routines and simple upkeep The electronic nature of this digital caliper supports straightforward inclusion in routine metrology workflows: quick checks, tool set‑up and pass/fail assessments. The instrument’s resolution of 0.01 mm matches standard digital calipers for machine‑shop use, while the specified accuracy of 0.02 mm provides confidence for standard quality control tasks. Maintenance is limited to keeping measuring faces clean and protecting the slide from shocks; the IP67 protection further reduces downtime related to contamination. For specialised calibration certificates or traceability requirements, Metav Werkzeuge can advise on options to match company quality systems. Contact Metav Werkzeuge today to discuss how the Microtech Metrology digital caliper fits current inspection needs or to arrange delivery from Emmerich with advice on suitable accessories and calibration options Technical data Article number: 141830153 GTIN: 4061905036453 Manufacturer: Microtech Metrology ECLASS: 21170344 Facts Measuring range: 0–150 mm Internal measuring range: 3–150 mm Resolution / display: 0.01 mm (Swiss Digit, 11 mm) Accuracy: 0.02 mm Protection class: IP67 Measuring force: external 8 N, internal 4 N Special features Small measuring jaws for interior measurements Digital electronic caliper IP67-rated electronics for workshop environments Standard range device for machine and metalworking inspection FAQ Is this caliper suitable for daily workshop use? The Microtech Metrology digital caliper is designed for daily workshop use, combining an IP67 rating and robust mechanics to withstand common shop conditions. What level of accuracy and resolution does the instrument provide? The instrument offers a resolution of 0.01 mm and an accuracy of 0.02 mm, meeting standard requirements for machine‑shop inspection and routine quality checks. Can the caliper measure internal and external dimensions reliably? Yes; the caliper features small measuring jaws for improved access to internal features and dual measuring force settings for consistent external and internal measurements. Does the display remain readable in bright or dim conditions? The 11 mm Swiss Digit display is engineered for high legibility so that readings remain clear in typical workshop lighting. Is the device protected against dust and coolant splashes? The IP67 protection class shields the electronics from dust ingress and temporary immersion, making it suitable for many production environments. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Digital Precision Caliper With Swiss Digit Display 11mm, Double Measuring Force 8N/4N, IP67, ISO 17025 Calibrated - Microtech Metrology
Benefit from workshop-grade repeatability and a compact footprint: high 0.001 mm resolution, protected IP67 housing and an ISO 17025 calibration certificate ensure reliable quality control with minimal downtime. Order the Digital Caliper 0–150 mm directly via Metav Werkzeuge or consult our specialists for application advice. Digital Caliper 0–150 mm — Microtech Metrology (IP67, ISO 17025) The Digital Caliper 0–150 mm from Microtech Metrology is a robust, calibrated measuring instrument for general machine and metalworking use, offering fine-resolution digital readout and sealed protection for workshop environments 0.001 mm resolution for fine measurements ISO 17025 calibration certificate included IP67 protection against dust and water Dual measuring force 8N / 4N for repeatability Accuracy and process reliability that reduce rework The compact instrument delivers a 0–150 mm measuring range with an exceptional 0.001 mm resolution and a manufacturer-stated ±0.015 mm accuracy, making it suitable for standard workshop quality control. The combination of fine resolution and traceable calibration under ISO 17025 provides a verifiable measurement chain that supports incoming inspection, in-process checks and final inspection tasks. When measurement uncertainty matters, this level of documentation and repeatability limits costly rework and contributes to a stable production flow. Workshop-ready ergonomics and reproducible measurements Designed for daily use, the caliper features a readable Swiss Digit display with 11 mm-high digits and a sealed housing rated IP67, which protects the electronics from coolant and fine dust in machining environments. The dual measuring force (8 N externally, 4 N internally) reduces operator-induced variation by standardising contact pressure for both external and internal measurements. A jaw length of 46 mm improves access for deeper grooves or stepped features, while the compact overall design keeps handling straightforward during repeated checks. Traceability and classification for practical deployment Delivered fully calibrated with an ISO 17025 certificate, the instrument ensures documented traceability to recognised laboratory standards, simplifying audit preparation and quality-system compliance. Classified in the Standard caliper range (100–300 mm class), it strikes a balance between reach and stiffness that fits most machine‑shop and maintenance tasks. The sealed digital electronics and the included calibration documentation make this caliper a practical choice for production lines and inspection benches where documented performance and uptime are priorities. For calibrated, workshop-grade precision backed by ISO 17025 documentation, contact Metav Werkzeuge in Emmerich for purchasing advice and fast delivery: info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 141230156 GTIN: 4061905457852 Manufacturer: Microtech Metrology Facts Measuring range: 0–150 mm Resolution: 0.001 mm Accuracy: ±0.015 mm Display height: 11 mm Jaw length: 46 mm Measuring cone diameter: 4 mm Measuring force: 8 N external / 4 N internal Protection class: IP67 Calibration: ISO 17025 certificate included Special features Digital caliper with Swiss Digit display Standard class caliper (100–300 mm range) Dual measuring force for consistent contact Delivered calibrated with certificate Suitable for routine workshop and inspection use FAQ Is the caliper delivered calibrated? Yes. The Digital Caliper 0–150 mm from Microtech Metrology is delivered fully calibrated with an ISO 17025 calibration certificate for traceable measurement results. What protection does IP67 provide for this caliper? IP67 means the instrument’s housing is dust-tight and protected against temporary immersion, so the caliper remains functional in environments with coolant splashes or fine particles. What accuracy and resolution can be expected in daily use? The caliper provides a 0.001 mm display resolution and a stated accuracy of ±0.015 mm, which supports reliable dimensional checks in standard machine‑shop applications. How does the dual measuring force help with repeatability? The dual measuring force (8 N external, 4 N internal) standardises contact pressure for different measurement types, reducing operator-induced variability and improving repeatability across repeated checks. Is the instrument suitable for routine workshop inspection? Yes. As a Standard-range digital caliper with sealed electronics and ISO 17025 documentation, it is tailored to routine inspection tasks in manufacturing and maintenance. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Digital Precision Caliper With Wireless Output, Swiss Digit Display 11mm, IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of a robust, workshop-ready measuring tool that combines wireless data transfer, an IP67 protection rating and precise digital reading; the result is reliable, repeatable measurements for production and quality control. Order directly via Metav Werkzeuge or contact our advisors for tailored technical support. Digital Caliper (Messschieber) – 0–150 mm, Wireless, IP67 by Microtech Metrology Digital Caliper (Messschieber) for industrial workshop and field measurement, offering rugged protection and traceable calibration for quality assurance Wireless data output, ready for measurement networks Delivered calibrated to ISO 17025 with certificate Swiss Digit display, high-contrast 11 mm digits 0–150 mm range with 0.01 mm resolution Reliable precision for routine inspection The 0–150 mm measuring range places this instrument in the Standard class, ideal for everyday tasks in machine and metal workshops where reach and stiffness must be balanced. With a resolution of 0.01 mm and an indicated accuracy of ±0.03 mm, the digital gauge ensures measurements that meet common production tolerances while remaining simple to interpret. The high-contrast Swiss Digit display (11 mm) reduces reading errors and speeds up inspection routines; operators benefit from clear numeric feedback rather than interpreting a vernier scale, which supports faster throughput and fewer rechecks. Built to withstand workshop and field conditions Designed for demanding environments, the instrument carries an IP67 rating, protecting internal electronics from dust and temporary immersion. The sealed construction combined with wireless data output makes the device suitable for wet or oily conditions and simplifies integration into digital workflows without exposing connectors. Robust jaws and a 46 mm jaw length provide reliable contact geometry and repeatability, while the compact overall size keeps the caliper easy to handle for single-handed measurement tasks on components, flanges and assemblies. Traceable calibration and quality assurance This caliper is supplied fully calibrated to ISO 17025, accompanied by a calibration certificate, which documents traceability and supports internal quality systems and audits. The included certification removes uncertainty at first use and streamlines incoming inspection or shop-floor certification routines. For production environments where documentation matters, the delivered proof of calibration is a practical advantage that shortens qualification time and supports compliance initiatives. Practical workflow and operator advantages Wireless data transfer facilitates rapid logging of values into inspection software or measurement logs, reducing transcription errors and accelerating sample collection. The absence of significant measuring force helps avoid deformation on delicate parts during contact measurements, and the compact measuring cone (4 mm) enhances access to tight internal features. Together, these characteristics mean fewer measurement steps and a smoother handover from inspection to production decisions, while the instrument’s repeatable display and ergonomics reduce operator fatigue during repetitive tasks. For acquisition or technical consultation on the Microtech Metrology digital caliper, contact Metav Werkzeuge for a straightforward purchasing process and expert advice tailored to workshop requirements Technical Data Article number: 141230154 GTIN: 4061905457869 Brand: Microtech Metrology Category: Digital caliper Data output: Wireless Facts Measuring range: 0–150 mm Resolution/display: 0.01 mm Indicated accuracy: ±0.03 mm Display height: 11 mm Jaw length: 46 mm Measuring cone diameter: 4 mm Protection class: IP67 Special features Digital display: Swiss Digit Delivered calibrated to ISO 17025 with calibration certificate No measuring force Standard class caliper (suitable for machine and metal workshops) Wireless data transmission FAQ What accuracy can be expected from this digital caliper? The caliper provides an indicated accuracy of ±0.03 mm with a display resolution of 0.01 mm, suitable for standard industrial inspection tasks. Is the instrument delivered with traceable calibration? Yes, the digital caliper is supplied calibrated to ISO 17025 and includes a calibration certificate for quality assurance and audit purposes. Can the caliper be used in wet or dusty environments? With an IP67 rating, the instrument is dustproof and protected against temporary immersion, making it appropriate for many workshop and field conditions. How is measurement data transferred from the device? Measurement values are transmitted via the integrated wireless data output, allowing direct logging into compatible inspection systems. Does the caliper suit measurements of small internal features? The compact measuring cone (4 mm diameter) and 46 mm jaw length support access to narrow internal bores and tight features while maintaining stable contact geometry. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Digital Radius Caliper With 0.01mm Resolution, Stainless Steel, 3V Battery, Supplied In Case - Metav IndustryLine
A robust blend of digital accuracy, a 3–150 mm measuring range and a hardened stainless‑steel construction delivers dependable radius measurement across workshop and inspection tasks; the unit also supports process connectivity via RB 5. Order the Digital Radius Caliper M240.093.N directly via Metav Werkzeuge or consult the specialists for application advice. Digital Radius Caliper M240.093.N — 3–150 mm, stainless steel, digital Digital Radius Caliper M240.093.N is a compact workshop instrument for measuring arcs and radii in mechanical and metalworking environments, designed for everyday use where repeatable results and data output are required *Digital radius measurement 3–150 mm *Resolution 0.01 mm and 0.0005 in display *Hardened stainless steel with metal housing *RB 5 data output for process integration Accurate measurement where it matters The Digital Radius Caliper M240.093.N combines a wide measuring range (3–150 mm) with a fine resolution of 0.01 mm (displayed also as 0.0005 in), delivering measurands that are both clear and directly comparable. Classified in the Standard range for calipers, it balances reach and rigidity for typical machine‑shop and quality‑control tasks. The instrument’s digital display with On/Off, Zero, Unit and Hold functions reduces readout errors and accelerates routine checks; the RB 5 interface provides a reliable channel for transferring measurements into an inspection or SPC system, emphasising efficiency and traceability in production workflows. Built for repeatability and workshop use Constructed from hardened stainless steel with a sturdy metal housing, this radius calliper resists wear and maintains jaw geometry under regular use, which helps to keep results reproducible over time. The solid build and balanced mass (approx. 0.52 kg) give stable handling during single‑handed measurements, while the end‑shapes are designed for consistent contact with curved surfaces. Such mechanical robustness, combined with the instrument’s digital readout, turns manual radius gauging into a dependable inspection task rather than a daily compromise. Practical integration that speeds processes The electrical supply is provided as a 3 V cell for straightforward maintenance and long service intervals, and the instrument’s electronics are optimised for clear presentation and rapid unit switching between millimetres and inches. The RB 5 data output enables integration into measuring stations and data collection chains, reducing transcription errors and supporting quality documentation. For workshops that value both hands‑on measurement and digital documentation, this radius caliper links precise single‑point checks with modern traceability and process control. For reliable radius measurement and smooth integration into production data flows, choose the Metav IndustryLine Digital Radius Caliper M240.093.N and contact Metav Werkzeuge in Emmerich for tailored advice and supply arrangements. Technical Data Article number: M240.093.N Name: Digital radius caliper, 3–150 mm Manufacturer: Metav IndustryLine Facts Measuring range: 3–150 mm Resolution (metric): 0.01 mm Resolution (inch): 0.0005 in Weight: 0.52 kg Power: 3 V Tariff number: 90173000 Special features Material: hardened stainless steel, metal housing Display: On/Off, Zero, Unit, Hold Data output: RB 5 Workshop standard Digital caliper FAQ What measuring range does the caliper cover? The caliper measures from 3–150 mm, suitable for standard workshop radius and arc measurements. What resolution and readout options are available? The display shows 0.01 mm resolution and 0.0005 in for inch readings, with a unit toggle on the digital display. Is the instrument suitable for integration with data systems? Yes — the device provides RB 5 data output for connection to data acquisition or SPC systems, enabling automated logging. What materials and construction ensure durability? The gauge is made from hardened stainless steel and features a metal housing, intended for robust daily use in machining and inspection environments. Is this caliper supplied with a calibration certificate? The product is specified as workshop standard and supplied accordingly; an ISO 17025 certificate is not indicated for this item. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digitaler Messschieber, 0,01mm Auflösung, IP 67, doppelte Messkraft, ohne Messaufsatz, ISO 17025 kalibriert - Microtech Metrology
Messschieber von Microtech Metrology – digitaler Messschieber Der Messschieber bietet präzise Längenmessung bis 150 mm mit klarer Swiss Digit Anzeige und ist für Maschinenbau und Qualitätskontrolle konzipiert. Digitalanzeige Swiss Digit 11 mm Messbereich bis 150 mm Ablesung 0,01 mm für hohe Präzision IP 67 Schutz gegen Staub und Spritzwasser Kalibriert nach ISO 17025 mit Zeugnis Höchste Präzision für wiederholbare Messergebnisse Der digitale Messschieber überzeugt durch eine feine Ablesung von 0,01 mm, eine deutlich lesbare Swiss Digit Anzeige und eine marktgerechte Mechanik, die Messfehler reduziert. Die Kombination aus konstanter Messkraft und digitaler Anzeige sorgt für schnelle, reproduzierbare Messungen. Die Messkraft ist doppelt ausgeführt mit 8N extern und 4N intern, was die Einflussnahme durch Handdruck minimiert und somit die Ergebnissicherheit erhöht. Schutz und Alltagstauglichkeit für die Werkstatt Mit Schutzklasse IP 67 ist das Instrument gegen Eindringen von Staub und gegen zeitweiliges Untertauchen geschützt, was den Einsatz in rauen Werkstattumgebungen erleichtert. Die Lieferung erfolgt ohne Messaufsatz, wodurch flexible Adaption an spezielle Prüfaufgaben möglich bleibt. Durch den Messbereich von 0 bis 150 mm gehört das Gerät zur Standardklasse für Werkstatt und Fertigung und bietet das beste Verhältnis aus Reichweite und Handhabung für Routineprüfungen. Messbereich und Kalibrierung als Sicherheit für die Qualitätssicherung Der Messbereich bis 150 mm macht das Werkzeug zur universellen Basis für Bauteilprüfungen und Montagekontrolle. Die ISO 17025 Kalibrierung wird mitgeliefert und dokumentiert durch ein Kalibrierzeugnis, was die Inbetriebnahme in Prüfabläufe und die Rückverfolgbarkeit in Qualitätsmanagementsystemen erleichtert. Dadurch eignet sich der Schieber sowohl für interne Prüfungen als auch für Arbeiten mit Lieferantenfreigaben. Effizienzsteigerung in Prüfvorgängen und Datennutzung Die klare Ablesung und die robuste Bauweise reduzieren Messzeiten und Nacharbeit. Durch die digitale Anzeige werden Messwerte schneller erfasst und Prozessschritte verkürzt, was die operative Effizienz erhöht. Die kompakte Ausführung unterstützt den flexiblen Einsatz an Prüfplätzen, an Montagebänken und bei mobilen Prüfungen, sodass die Investition in diesen Messschieber unmittelbar zur Fehlervermeidung und Zeitersparnis beiträgt. Empfehlung: Für präzise Werkstatt‑ und Prüfaufgaben wählen Sie den Microtech Metrology Messschieber mit ISO 17025 Kalibrierung; bei technischen Fragen erreichen Sie Metav per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 141078122T Marke: Microtech Metrology GTIN: 4061905454684 ECLASS: 21170344 Bezeichnung: Messschieber Daten Messbereich: 0-150 mm Messbereich_min_mm: 0 mm Messbereich_max_mm: 150 mm Ablesung: 0,01 mm Digitalanzeige: Swiss Digit Höhe 11 mm Besonderheiten IP Schutz: IP 67 (Schutz gegen Staub und zeitweiliges Untertauchen) Messkraft: Doppelt (8N extern und 4N intern) Besonderheit: Ohne Messaufsatz ISO 17025 Kalibriert: Kalibrierzeugnis wird mitgeliefert Digital: true FAQ Wie genau ist die Messung mit diesem Messschieber? Der Microtech Metrology Messschieber erreicht eine Ablesung von 0,01 mm und bietet damit die Genauigkeit, die in vielen Fertigungs‑ und Prüfprozessen gefordert wird. Die werkseitige ISO 17025 Kalibrierung sorgt zusätzlich für nachweisbare Messsicherheit. Eignet sich das Gerät für den rauen Werkstatteinsatz? Ja, dank IP 67 Schutz ist der Messschieber gegen Staub und zeitweiliges Untertauchen geschützt, wodurch er für anspruchsvolle Umgebungen in Werkstatt und Produktion geeignet ist. Wird der Messschieber kalibriert geliefert? Der Messschieber von Microtech Metrology wird komplett kalibriert ausgeliefert; das dazugehörige Kalibrierzeugnis gemäß ISO 17025 liegt dem Produkt bei. Welche Vorteile bringt die doppelte Messkraft? Die doppelte Messkraft (8N extern, 4N intern) reduziert den Einfluss variierender Anpresskräfte durch den Anwender und verbessert dadurch die Reproduzierbarkeit von Messergebnissen bei wiederkehrenden Prüfungen. Ist eine Erweiterung für spezielle Messaufgaben enthalten? Das Produkt wird ohne Messaufsatz geliefert, so dass Anwender flexibel entscheiden können, welche Aufsätze oder Adapter für spezielle Messaufgaben benötigt werden. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
150mm Digitaler Universal-Messschieber, 0,001mm, IP 54, Force Control, Color Touchscreen, Wireless+USB, kalibriert nach ISO 17025 - Microtech Metrology
Die Kombination aus ISO 17025 Kalibrierung, Auflösung 0,001 mm und flexiblem Wireless+USB Datenausgang macht dieses Messgerät zu einer verlässlichen Lösung für präzise Messabläufe. Die Schutzart IP54 und die einstellbare Messkraft sorgen für Robustheit und reproduzierbare Ergebnisse im Alltag der Werkstatt. Beziehen Sie den Schieber über Metav Werkzeuge oder kontaktieren Sie unsere Beratung für technische Abstimmung. Universal-Messschieber von Microtech Metrology Der Universal-Messschieber kombiniert ein Color 1.5" Touchscreen mit Wireless+USB Datenausgang für präzise Werkstatt‑ und Laboranwendungen Universal-Messschieber mit ISO 17025 Kalibrierung Auflösung 0,001 mm für hochpräzise Messwerte Wireless und USB Datenausgang für Datenerfassung Schutzart IP54 schützt vor Staub und Spritzwasser Lieferumfang: 3 Paar Aufsatzbacken Präzision sichern durch Kalibrierung und feine Auflösung Mit einer Auflösung von 0,001 mm liefert das Gerät Messwerte im hochpräzisen Bereich, die für differenzierte Prüfaufgaben geeignet sind. Die Kalibrierung nach ISO 17025 gewährleistet rückführbare Referenzwerte und ein zugehöriges Kalibrierzeugnis wird mitgeliefert, wodurch sich die Einbindung in Qualitätsmanagement und Prüfprotokolle vereinfacht. Anwender profitieren von nachvollziehbarer Messunsicherheit und verbesserter Prozessstabilität bei der Freigabe von Bauteilen. Effiziente Bedienung und sichere Datenübertragung Das Color 1.5" Touchscreen bietet eine übersichtliche Anzeige und erleichtert die Bedienung auch bei häufiger Nutzung. Der kombinierte Wireless+USB Datenausgang ermöglicht direkte Übertragung in Messdatenerfassungs‑Systeme und vermeidet manuelle Eingabefehler. Diese Schnittstellen reduzieren den administrativen Aufwand in der Dokumentation und beschleunigen den Prüfablauf, ohne dass zusätzliche Adapter erforderlich sind. Robustheit und passende Klassifizierung für die Werkstatt Mit einem Messbereich bis 150 mm gehört das Gerät zur Standard‑Klasse für Maschinen‑ und Metallbau und bietet das beste Verhältnis aus Reichweite und Handhabung. Die Schutzart IP54 schützt vor Staub und Spritzwasser, während die einstellbare Messkraft von 1–20 N die Reproduzierbarkeit bei empfindlichen Oberflächen verbessert. Damit eignet sich der Schieber für die Einsatzfelder Endkontrolle, Werkzeugbau und präzise Fertigungsprozesse. Zubehör, Zielgruppe und Anwendungsfelder Im Lieferumfang sind 3 Paar Aufsatzbacken enthalten, die den Einsatz an unterschiedlichen Werkstückgeometrien erleichtern. Der Schieber richtet sich an Prüfpersonal in Fertigung und Labor, an Feinmechaniker sowie an Qualitätsverantwortliche, die auf rückführbare Kalibrierung und digitale Datenübertragung Wert legen. Die Kombination aus Kalibrierzertifikat und Datenausgang macht das Gerät zur sinnvollen Investition für werkstattnahe Qualitätskontrolle. Für planbare Präzision empfiehlt Metav Werkzeuge den Erwerb dieses Universal‑Messschiebers; bei technischen Fragen erreichen Sie uns per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 141630158 Marke: Microtech Metrology Bezeichnung: Universal-Messschieber GTIN: 4061905037641 Daten Messbereich: 0–150 mm Auflösung: 0,001 mm Messkraft: 1–20 N IP Schutz: IP 54 Besonderheiten Digitales Display: Color 1.5" Touchscreen Datenausgang: Wireless+USB Zubehör: mit 3 Paar Aufsatzbacken Kalibriert ausgeliefert: Kalibrierung nach ISO 17025 mit Kalibrierzeugnis Digital: Digitale Anzeige für einfache Ablesung FAQ Wie genau ist die Messung mit diesem Schieber? Die Messung erfolgt mit einer Auflösung von 0,001 mm; durch die ISO 17025 Kalibrierung des Universal‑Messschiebers von Microtech Metrology sind die Ergebnisse für viele Qualitätsprozesse nachvollziehbar und dokumentierbar. Welche Schnittstellen bietet der Messschieber für die Datenerfassung? Der Universal‑Messschieber verfügt über Wireless und USB Datenausgang, sodass Messdaten direkt an Auswertesoftware oder Datenerfassungssysteme übertragen werden können. Ist das Gerät für den Einsatz in rauer Werkstattumgebung geeignet? Ja, die Schutzart IP54 schützt vor Staub und Spritzwasser, sodass der Schieber den Anforderungen typischer Werkstattbedingungen gerecht wird. Welche Vorteile bieten die mitgelieferten Aufsatzbacken? Die 3 Paar Aufsatzbacken erweitern die Anwendbarkeit des Schiebers für unterschiedliche Werkstückformen und erleichtern präzise Innen‑ und Außenmessungen ohne zusätzlichen Aufwand. Hersteller: Microtech, Nizhneyurkovska Str. 45a; 04080 Kyiv; Ukraine; tool@microtech.tools
150mm Digitaler Universal-Messschieber, 0,01mm Auflösung, IP 67, ISO 17025 kalibriert, mit Aufsatzbacken und Zubehör - Microtech Metrology
Der Universal-Messschieber kombiniert ISO 17025 Kalibrierung, robuste IP 67 Schutzklasse und eine feine Ablesung von 0,01 mm zu einer verlässlichen Basis für Qualitätsprüfungen; dadurch entstehen reproduzierbare Messwerte und reduzierte Nacharbeit. Bestellen Sie das Messgerät direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Universal-Messschieber von Microtech Metrology Der Universal-Messschieber ist ein digitales Messwerkzeug für präzise Innen‑ und Außenmessungen im Werkstatt‑ und Fertigungsalltag. Messbereich 0–150 mm, ideal für Standardanwendungen Digitale Anzeige Swiss Digital, Höhe 11 mm Ablesung 0,01 mm für reproduzierbare Ergebnisse IP 67 Schutz gegen Staub und zeitweiliges Untertauchen Lieferung mit ISO 17025 Kalibrierschein Präzision und Messsicherheit für den Maschinenbau Aufgrund der Ablesung 0,01 mm und der angegebenen Genauigkeit 0,03 mm liefert dieses Messgerät konzise Ergebnisse, die sich in der Serienfertigung auszahlen. Anwender profitieren von klaren Zahlen, die Prüfpläne und Toleranzvorgaben zuverlässig stützen. Durch die mechanische Auslegung und die handgefertigten Messbacken entsteht eine belastbare Schnittstelle zur Werkstückmessung, die Nacharbeit reduziert und Prüfzeiten verkürzt. Bedienkomfort durch klare Anzeige und robuste Ausführung Die Swiss Digital Anzeige mit 11 mm Ziffernhöhe sorgt für schnelle Ablesung auch bei dichter Arbeitsumgebung; dadurch werden Messzyklen beschleunigt und Fehler durch Schätzwerte vermieden. Zusätzlich bietet die selbstschmierende Konstruktion langfristig gleichbleibende Gleitverhältnisse und reduziert Wartungsaufwand. Diese Eigenschaften erhöhen die Arbeitseffizienz bei wiederkehrenden Messaufgaben. Eignung für Werkstatt und Fertigung – Standardklasse Mit einem Messbereich von 0–150 mm gehört dieses Gerät zur Standardklasse und deckt die typischen Anforderungen im Maschinen‑ und Metallbau ab. Für Prüfvorrichtungen, Montagekontrollen und Qualitätssicherung bietet der Schieber das beste Verhältnis aus Reichweite, Steifigkeit und Bedienbarkeit, sodass häufige Messungen mit einer Hand durchgeführt werden können. Kalibrierung, Dokumentation und Zubehör Das Gerät wird mit vollständiger ISO 17025 Kalibrierung ausgeliefert und enthält ein Kalibrierzeugnis, was die Nachvollziehbarkeit von Messketten vereinfacht. Das mitgelieferte Zubehör umfasst Aufsätze für Innen‑ und Außennuten (5 mm), Innen‑ und Außenpunkt Ø3x5 mm sowie einen MessÂteller Ø30 mm, was die Vielseitigkeit bei speziellen Messaufgaben erhöht. Metav Werkzeuge empfiehlt den Microtech Universal‑Messschieber mit ISO 17025 Kalibrierung als zuverlässige Wahl für präzise Messaufgaben; bei Fragen zur Anwendung erreichen Sie unsere Fachberatung unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930. Produktmerkmale Artikelnummer: 141630153 GTIN: 4061905037443 Marke: Microtech Metrology Bezeichnung: Universal-Messschieber Fakten Messbereich: 0–150 mm Messbereich maximal: 150 mm Ablesung: 0,01 mm Genauigkeit: 0,03 mm IP Schutz: IP 67 Besonderheiten Digitalanzeige: Swiss Digital, Höhe 11 mm ISO 17025 Kalibrierung: Kalibrierzeugnis liegt bei Selbstschmierend Handgefertigte Messbacken Aufsätze: Innen- und Außennuten 5 mm Aufsätze: Innen- und Außenpunkt Ø3x5 mm Aufsatz: Teller Ø30 mm Messkraft: Keine FAQ Wie genau ist die Messung mit dem Universal‑Messschieber? Die Genauigkeit des Universal‑Messschiebers beträgt 0,03 mm bei einer Ablesung von 0,01 mm; diese Kombination ermöglicht zuverlässige Ergebnisse für Standardprüfungen in der Fertigung. Wird der Messschieber kalibriert geliefert? Ja, der Universal‑Messschieber von Microtech Metrology wird vollständig kalibriert geliefert und enthält ein Kalibrierzeugnis nach ISO 17025. Für welche Anwendungen eignet sich der Messbereich 0–150 mm? Der Messbereich 0–150 mm ist ideal für allgemeine Werkstatt‑ und Fertigungsaufgaben im Maschinen‑ und Metallbau sowie für Montage‑ und Qualitätskontrollen. Welches Zubehör ist im Lieferumfang enthalten? Im Lieferumfang sind Aufsätze für Innen‑ und Außennuten 5 mm, Innen‑ und Außenpunkt Ø3x5 mm sowie ein MessÂteller Ø30 mm enthalten. Welche Schutzklasse hat das Gerät und was bedeutet das praktisch? Der Schieber besitzt die Schutzklasse IP 67, was Staubdichtigkeit und Schutz gegen zeitweiliges Untertauchen bedeutet; dadurch eignet sich das Gerät auch für anspruchsvollere Produktionsumgebungen. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
150mm Precision Caliper Digital Touchscreen With Offset Jaws, IP54, ISO 17025 Calibrated Wireless+USB - Microtech Metrology
High-resolution 0.02 mm accuracy combined with ISO 17025 calibration and a Touchscreen interface ensures traceable, reliable measurements and fast data capture; the Wireless + USB outputs enable direct integration into production data workflows. Order the digital caliper directly via Metav Werkzeuge or ask our consultants if needed. Microtech Metrology digital precision caliper — 0–150 mm, touchscreen The Microtech Metrology digital precision caliper is a touchscreen caliper designed for workshop and quality-control use, offering wireless and USB data output for easy measurement logging. Calibrated to ISO 17025 with certificate Touchscreen display for fast readings Wireless and USB data output IP54 protection against dust and spray Traceable calibration for confident quality control The caliper arrives fully calibrated according to ISO 17025, with a calibration certificate included, which simplifies acceptance in internal audits and external supplier assessments. This documented traceability reduces administrative overhead and shortens the time from purchase to productive use. By relying on a verified standard, inspection routines gain immediate credibility and repeatability, which supports consistent quality across production batches. Rapid, error‑reducing data capture for production A responsive Touchscreen and dual Wireless + USB data outputs speed up measurement cycles and reduce transcription errors in quality reports. The instrument displays readings with a 0.005 mm step and an accuracy of 0.02 mm, which is sufficient for standard workshop control tasks. Direct digital transfer to SPC or measurement software eliminates manual entry, improving throughput and enabling faster statistical analysis of process capability. Robust design tailored to everyday workshop conditions Built for active shop floors, the unit carries an IP54 rating that protects against dust ingress and light spray, extending service life in practical environments. The 0–150 mm measuring range places this tool in the standard range category — the versatile baseline for general mechanical and metalworking tasks where reach and stiffness are balanced. The specified measuring force 1–20 N helps maintain more consistent contact pressure during readings, which supports reproducible results in routine checks. Practical handling and measurement access that saves time Longer outer jaws and compact inner jaws (measured as 110/40 mm) provide access to small recesses and external surfaces with stable support, aiding repeatable positioning. The digital interface and robust data ports mean measurements can be recorded directly into inspection sheets or production databases without additional adapters. These features combine to reduce rework and inspection bottlenecks, making the instrument a pragmatic choice for shops seeking measurable productivity gains. Contact Metav Werkzeuge today to discuss integrating this digital caliper into your inspection workflow or to request a purchase recommendation from our specialists at the Emmerich site. Technical data Article number: 141740157 GTIN: 4061905457418 Manufacturer: Microtech Metrology Facts Measuring range: 0–150 mm Accuracy: ±0.02 mm Resolution (display): 0.005 mm Protection class: IP54 Special features Display type: Touchscreen Data output: Wireless + USB Measuring force: 1–20 N Jaw lengths: 110/40 mm Digital caliper: yes ISO 17025 calibration: included (certificate supplied) FAQ Is the caliper delivered with a calibration certificate? Yes. The Microtech Metrology digital precision caliper is supplied fully calibrated to ISO 17025, and a calibration certificate is included with the delivery. Can measurement data be transferred directly to inspection software? Yes. The caliper supports Wireless + USB data output, enabling direct transfer to SPC systems or measurement software without manual transcription. What level of precision can be expected for workshop checks? The instrument offers 0.02 mm accuracy with a display resolution of 0.005 mm, which is suitable for typical machine‑shop and production quality control tasks. Is the caliper suitable for workshop use with occasional coolant or dust exposure? The tool has an IP54 rating, providing protection against dust and light spray; it is therefore appropriate for standard workshop environments, though heavy immersion should be avoided. How do the jaw dimensions affect usability in confined spaces? With jaw lengths of 110/40 mm, the caliper provides extended external reach while retaining compact inner jaws for confined internal checks, aiding access to recesses and stepped features. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
150mm Precision Caliper For Pipe Wall Thickness Measurement Color 1.5" Touchscreen, IP54 - Microtech Metrology
Delivered fully calibrated to ISO 17025 with a traceable calibration certificate, this instrument combines high-resolution measurement and flexible data transfer for reliable quality control. Benefit from the colour touchscreen, Wireless + USB output and IP54 protection for fast, documented inspections — order via Metav Werkzeuge or contact their consultants for technical advice. Digital caliper — Microtech Metrology, colour touchscreen and wireless data output A digital caliper designed for workshop and laboratory use, offering a 1.5" colour touchscreen and both wireless and USB data transfer for streamlined measurement workflows. ISO 17025 calibrated instrument Colour 1.5" touchscreen display Wireless and USB data output Measuring range 0–150 mm, 0.005 mm resolution Traceable calibration that reduces measurement uncertainty Delivered with an ISO 17025 calibration certificate, this instrument ensures traceable measurements suitable for incoming inspection and process control. A documented calibration reduces audit effort and supports compliance with quality management systems; the supplied certificate confirms that the device was verified against recognised standards, enabling immediate use in documented testing routines without additional laboratory downtime. Fast data capture to speed up quality routines Equipped with Wireless and USB interfaces combined with a colour 1.5" touchscreen, the caliper simplifies data acquisition and transfer into inspection software or spreadsheets. Digital readout and direct export minimise transcription errors and accelerate batch testing, which translates to a measurable increase in throughput during repetitive measurement tasks while maintaining reliable data integrity for reporting. Robust design for daily shop-floor and lab use Rated IP54 for dust and splashing protection and classified as a standard caliper based on its 0–150 mm range, the instrument balances reach and stiffness for everyday mechanical and metalworking measurements. With a reading step of 0.005 mm and a measurement force range of 1–20 N, it supports precise external, internal and depth measurements while standing up to routine handling on the shop floor. The compact jaw geometry and 46 mm measuring faces make it suitable for confined spaces without compromising stability. For traceable precision and efficient data handling choose Microtech Metrology's calibrated digital caliper — contact Metav Werkzeuge for procurement or technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 141230157 GTIN: 4061905037542 Manufacturer: Microtech Metrology Facts Measuring range: 0–150 mm Resolution/reading: 0.005 mm Measurement force: 1–20 N Jaw length: 46 mm Protection class: IP54 Display: Colour 1.5" touchscreen Special features Data output: Wireless + USB Delivered fully calibrated with ISO 17025 certificate Digital instrument for workshop and laboratory use Category: Standard caliper (0–300 mm class) FAQ Is the instrument supplied with a calibration certificate? Yes. The digital caliper from Microtech Metrology (SKU 141230157) is delivered fully calibrated and includes an ISO 17025 calibration certificate. How accurate is the measurement and what is the resolution? The device provides a reading step of 0.005 mm and is intended for high-precision workshop and lab tasks where sub-hundredth millimetre resolution is required. Can measurement data be transferred directly to inspection software? Yes. The caliper supports both Wireless and USB data output for direct integration with inspection software and data-logging systems. What does IP54 protection mean in practice? IP54 indicates protection against limited dust ingress and against water splashes; suitable for normal workshop conditions but not for full immersion. Is the measuring range suitable for general metalworking tasks? The 0–150 mm range places this instrument in the standard class, offering a practical balance of reach and rigidity for most machine-shop and maintenance measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Precision Caliper For Pipe Wall Thickness Measurement Digital 13mm Display IP54, ISO 17025 Calibrated - Microtech Metrology
Take advantage of traceable ISO 17025 calibration together with an accurate 0–150 mm measuring range and USB data output for seamless documentation; this combination supports dependable pipe wall thickness control and efficient workshop workflows. Order the instrument directly via Metav Werkzeuge or contact our consultants for application advice. Digital caliper 0–150 mm – Microtech Metrology with USB output and IP54 protection Digital caliper 0–150 mm – Microtech Metrology designed for quick, reliable pipe wall thickness measurement in industrial and workshop settings, offering traceable calibration and robust data transfer. ISO 17025 calibrated and traceable USB data output for simple logging 0–150 mm measuring range, standard class IP54 protection for workshop conditions Traceable precision that supports inspection and production The calibrated instrument delivers a readable resolution of 0.01 mm and an operational accuracy of ±0.03 mm, enabling consistent wall‑thickness checks across batches. Supplied with an ISO 17025 calibration certificate, the device removes doubts about measurement traceability and supports quality documentation. This level of measured certainty reduces rework and helps maintain process stability in machine shops and quality departments. Fast data capture to reduce administrative effort Equipped with a USB data output and a clear 13 mm digital display, the caliper removes manual transcription from measurement routines. Direct digital transfer accelerates logging into inspection protocols or SPC systems, so measurement records are both faster to create and less prone to human error. The instrument therefore integrates smoothly into existing data workflows and supports efficient reporting for traceable quality control. Built for workshop conditions and pipe applications With an IP54 rating, the caliper withstands workshop dust and routine exposure to coolant splashes, so measurements remain reliable in demanding environments. The measuring cone has a diameter of 4 mm and the jaw length is 46 mm, optimised for assessing pipe wall thickness where access can be restricted. No additional measuring force mechanism is specified, which simplifies the handling concept and keeps the tool compact for regular inspection tasks. Contact Metav Werkzeuge for advice on this calibrated measuring instrument, request the ISO 17025 certificate or discuss integration into existing test procedures — Metav Werkzeuge supports buyers from Emmerich with a reliable supply chain and expert consultancy Technical data Article number: 141230150 GTIN: 4061905457692 Manufacturer: Microtech Metrology Facts Measuring range: 0–150 mm Resolution: 0.01 mm Accuracy: 0.03 mm Display height: 13 mm Measuring cone diameter: 4 mm Jaw length: 46 mm Protection class: IP54 Data output: USB Calibrated according to: ISO 17025 Special features Digital instrument for pipe wall thickness measurement Standard‑class caliper suitable for machine and metal workshops Supplied with ISO 17025 calibration certificate No specified measuring force Robust design for industrial use FAQ What measurement range does this caliper cover? The caliper covers a measuring range of 0–150 mm, making it a standard‑class instrument for general workshop and machine‑shop tasks. Is the instrument calibrated and traceable? Yes, the instrument is supplied fully calibrated with an ISO 17025 certificate issued by the manufacturer (Microtech Metrology), ensuring traceable measurements. How is measurement data transferred? Measurement values can be exported via USB for direct logging into inspection software or spreadsheets, enabling efficient documentation. Is the caliper suitable for use in a workshop environment? The caliper has an IP54 rating, which protects against dust ingress and splashes, making it suitable for typical workshop conditions. Which features support pipe wall thickness measurement specifically? A compact measuring cone (4 mm diameter) and a jaw length of 46 mm facilitate access to pipe interiors and thin walls for reliable thickness checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
1520mm Digital Precision Caliper For Bore Spacing With Colour Display, IP54, ISO 17025 Calibrated - Microtech Metrology
Take advantage of a long measuring range, reliable workshop protection and full traceability: this caliper combines 1,520 mm reach, Wireless + USB data transfer and ISO 17025 calibration for reproducible results in heavy machining. Order the tool through Metav Werkzeuge or consult our specialists for application and delivery options. Microtech digital caliper — long-range, Wireless + USB, ISO 17025 calibrated The Microtech digital caliper is a long-range precision measuring instrument designed for large-component measurement in toolrooms, fixture construction and heavy machining environments. Long measuring range up to 1,520 mm Wireless + USB data output for process integration ISO 17025 calibrated with certificate IP54 protection suitable for workshop conditions Efficient data capture for large components The long-range digital caliper offers a measuring span from 20 mm to 1,520 mm, enabling dimensional checks on sizeable assemblies without multiple setups. The instrument provides a clear 2.4" colour display and a display resolution of 0.01 mm, while the stated accuracy of 0.05 mm is optimised for workshop metrology on large parts. Integration is simplified by Wireless + USB data transfer, allowing fast logging into inspection software or SPC systems and reducing manual transcription errors. This combination of range, readable display and digital output supports faster inspection cycles and better process control. Robust construction and workshop suitability Built for heavy use, the caliper features an IP54 ingress rating that resists dust and splash water commonly encountered at the bench. The specified measuring force range of 1–20 N accommodates different operator handling while keeping readings consistent. Classified as a Long caliper (measuring range category: 1,000–2,000 mm), it balances rigidity and reach so measurements remain reproducible along extended jaws. Included measuring cones Ø20 mm and Ø35 mm extend functionality for bore-centre and hole-spacing checks, reducing the need for separate fixtures when verifying larger components. Traceable calibration for quality assurance The instrument is delivered fully calibrated under ISO 17025, with an accompanying calibration certificate that documents traceability to national standards. This certification supports internal quality processes and external audits by providing verifiable measurement uncertainty and calibration data. For procurement and quality departments, the ISO 17025 report reduces incoming-inspection work and simplifies documentation for regulatory compliance and supplier quality control. Practical handling and application integration Practical features aid day-to-day use: the 0.01 mm display resolution gives straightforward readouts while the overall stated accuracy of 0.05 mm aligns with the tolerances frequently required for large assemblies and fixture alignment. The digital interface (Wireless + USB) enables direct data capture into inspection routines, and the robust design lowers the risk of downtime in busy workshops. Accessories supplied with the instrument, including the measuring cones Ø20/Ø35, make the device immediately usable for common bore and centre-to-centre measurements without additional tooling. Contact Metav Werkzeuge in Emmerich for application advice and supply of the Microtech long-range digital caliper with ISO 17025 certificate Technical data Article number: 141731517 GTIN: 4061905452413 Brand: Microtech Metrology Digital display: Colour 2.4" Data output: Wireless + USB Calibration: ISO 17025 (certificate included) Numbers / Core technical data Measuring range: 20–1,520 mm Display resolution: 0.01 mm Accuracy: 0.05 mm Measuring force: 1–20 N Protection class: IP54 Special features / Versions Digital caliper, long-range class (1,000–2,000 mm) Measuring cones Ø20 mm and Ø35 mm included Colour display for clear readout Wireless + USB for process integration Delivered with ISO 17025 calibration certificate FAQ Is the caliper supplied with a calibration certificate? Yes. The Microtech digital caliper is supplied fully calibrated under ISO 17025 and includes the corresponding calibration certificate. How is measurement data transferred from the instrument? Data can be exported via Wireless and USB interfaces, enabling direct capture into inspection software or SPC systems. What measuring range does this caliper cover? The instrument covers a range from 20 mm up to 1,520 mm, placing it in the long-range caliper category for large-component measurement. Is the caliper suitable for use in a workshop environment? The caliper has an IP54 protection rating, which provides resistance against dust and splashing water typical in workshop conditions. Which accessories are included with the caliper? The delivery includes measuring cones Ø20 mm and Ø35 mm to support bore and centre-to-centre measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
1520mm Digital Precision Caliper For Bore Spacing With Ø20/Ø35 Probes, IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of ISO 17025 traceability, the extended 20–1520 mm measuring range and IP67 protection for dependable large‑format measurements; order the calibrated instrument directly via Metav Werkzeuge or consult our specialists for application advice. Precision Caliper 20–1520 mm (Digital, IP67) — Microtech Metrology The Precision Caliper from Microtech Metrology is a long‑reach, ISO‑calibrated digital measuring instrument designed for accurate inspection of large components and workshop assemblies. ISO 17025-calibrated with certificate Measurement range 20–1520 mm IP67-rated for dust and water protection Swiss Digit display, 11 mm height Supplied with Ø20 mm and Ø35 mm cones Traceable accuracy that supports quality control The instrument is delivered fully calibrated according to ISO 17025, including a calibration certificate, which ensures measurable traceability for audit‑ready inspection routines. With a stated accuracy of 0.05 mm and a standard display resolution of 0.01 mm, the caliper provides the reproducible results required for production control and incoming inspection. This combination of certified calibration and repeatable resolution reduces uncertainty in acceptance decisions and documentation. Extended reach for large assemblies and fixtures Built for measurements up to 20–1520 mm, this long‑range solution covers large workpieces without resorting to multiple tools. The elongated beam balances reach with stiffness to keep deflection and measurement error low across the span, making it suitable for fixtures, housings and larger machined parts. Supplied Ø20 mm and Ø35 mm measuring cones facilitate bore‑centre and distance measurements, converting the caliper into a versatile instrument for both external and specialised internal tasks. Robust construction and clear readout for everyday use Designed for workshop environments, the caliper carries an IP67 rating that guards internal electronics from dust ingress and temporary immersion. The Swiss Digit display (11 mm character height) delivers high‑contrast numerals that speed up readings and reduce transcription errors on the shop floor. The compact electronic package and sealed Slides ensure that the device remains durable under frequent use while keeping handling intuitive for operators with varying levels of metrology experience. Streamlined workflow integration and practical benefits Integration into inspection routines is straightforward: the instrument’s certified status supports traceable records, while the rugged design and easy‑to‑read display shorten inspection cycles and lower rework rates. For quality engineers and workshop supervisors, the caliper represents an efficient way to combine large measurement capability with laboratory‑grade calibration—supporting consistent production quality and fewer measurement‑related stoppages. For tailored measurement advice or to request the ISO 17025‑calibrated Precision Caliper, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 141731513 GTIN: 4061905452567 Manufacturer: Microtech Metrology ECLASS: 21170344 Facts Measuring range: 20–1520 mm Resolution (reading): 0.01 mm Accuracy: 0.05 mm Display: Swiss Digit, character height 11 mm Protection rating: IP67 Special features ISO 17025 calibration with certificate Supplied with measuring cones Ø20 mm and Ø35 mm Long‑range caliper suitable for large components Digital readout for fast measurement capture Rugged, workshop‑ready construction FAQ Is the caliper supplied with a calibration certificate? Yes. The Precision Caliper from Microtech Metrology is delivered fully calibrated according to ISO 17025 and includes the corresponding calibration certificate. What measurement range does the instrument cover? The instrument measures from 20 mm to 1520 mm, classifying it as a long‑range caliper suitable for larger assemblies and fixtures. What accuracy and resolution can be expected? Declared accuracy is 0.05 mm with a display resolution of 0.01 mm, providing repeatable readings for standard workshop and production control tasks. Can the caliper be used in harsh workshop conditions? Yes. The device has an IP67 rating for dust and temporary immersion protection, making it robust enough for demanding workshop environments. Which accessories are included for special measurements? The delivery includes measuring cones Ø20 mm and Ø35 mm, enabling bore‑centre and specialised internal measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
1520mm Digital Precision Caliper With Wireless Data, Swiss Digit Display 11mm, IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of long-range measurement, wireless data transfer, and ISO 17025 calibration for reliable quality control of large components. Order the device directly via Metav Werkzeuge or ask the consultants for application support. Digital caliper 20–1520 mm by Microtech Metrology — long-range, wireless and IP67 protected Digital caliper 20–1520 mm from Microtech Metrology is a purpose-built instrument for precise dimensional checks across extended components, combining a large measuring range with robust protection and certified calibration. Long 20–1520 mm measuring range Wireless data transmission enabled IP67 dust and water protection Supplied calibrated to ISO 17025 Traceable accuracy for production and inspection The Digital caliper delivers measurable, documented accuracy that supports routine quality tasks and audit trails. Calibrated to ISO 17025, the instrument includes a calibration certificate so results are immediately traceable; the stated measuring accuracy of ±0.05 mm together with a display resolution of 0.01 mm ensures readings meet standard workshop tolerances while providing a verifiable basis for acceptance or adjustment. This combination reduces rework and simplifies compliance documentation. Extended reach without compromising stiffness With a measuring span of 20–1520 mm, the instrument is classified for Long-range measurements and is designed to bridge the gap between bench tools and heavy-duty gauges. The extended span enables checks of large fixtures, housings and assemblies that would otherwise require multiple instruments; engineered profile stiffness maintains repeatability over the length and helps to reduce deflection-related error during two-person handling or when using stands. Rugged build and seamless data workflows Protected to IP67, the caliper resists water and dust ingress for demanding shop-floor environments. The Swiss Digit 11 mm display provides clear numeric readout even under workshop lighting, while Wireless data output allows direct transfer of measured values to SPC or inspection software, cutting transcription time and the potential for human error. The robust electronics and sealed slider simplify daily use and support an efficient metrology workflow. Ready for large-part measurement with practical accessories Delivery includes measuring cones Ø20 mm and Ø35 mm, enabling straightforward measurement of hole centres or distance-to-centre tasks without additional adaptors. The instrument is tailored to machine shops, toolrooms and fixture manufacturers who require long travel and documented results; the combination of wide range, connectivity and certified calibration supports both shop-floor control and formal inspection routines with minimal setup. The integrated features streamline inspection steps and support fast decision-making during production. Choose the Microtech Metrology digital caliper for precise long-range measurement and contact Metav Werkzeuge for personalised advice and supply from Emmerich. Technical Data Article number: 141731514 GTIN: 4061905452307 Manufacturer: Microtech Metrology Facts Measuring range: 20–1520 mm Resolution: 0.01 mm Accuracy: ±0.05 mm Display height: 11 mm Data output: Wireless Protection rating: IP67 Special features Calibrated to ISO 17025; calibration certificate included Accessories: measuring cones Ø20 mm and Ø35 mm Digital display (Swiss Digit) Suitable for large-format components and workshop use FAQ What calibration documentation is supplied with this caliper? The Microtech Metrology digital caliper (SKU 141731514) is delivered fully calibrated to ISO 17025 and includes the official calibration certificate with measurement results. Is the instrument suitable for use at the machine or outdoors? Yes, the device is rated IP67, so it withstands dust and temporary immersion, making it suitable for harsh shop-floor conditions and occasional outdoor use during on-site checks. Can measured values be transferred directly to quality software? Wireless data output enables direct transmission of readings into SPC or inspection systems, reducing manual entry and improving data integrity for statistical process control. What is the usable measuring range and how is the tool classified? The measuring range is 20–1520 mm; this places the instrument in the long-range category, intended for large components where extended reach and maintained stiffness are required. Which accessories are included for specialised measurements? Included are measuring cones Ø20 mm and Ø35 mm, supplied to simplify centre-to-centre and bore-distance measurements without separate adaptors. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
15mm Bore Distance Measuring Insert Cone Measuring Faces For Digital Caliper Series 240.201-240.205 - Metav IndustryLine
Combines Ø 15 mm precision contact, conical measuring faces and stainless-steel robustness for reproducible bore-centre checks; compatible with the digital uni calipers series 240.201–240.205. Order the attachment directly via Metav Werkzeuge or consult our specialists for application support. M240.253 Bore-centre measuring insert Ø 15 mm — Conical faces for digital uni calipers (Metav IndustryLine) A M240.253 bore-centre measuring insert designed as an accessory for digital uni calipers, providing focused contact geometry for reliable centre-to-centre measurements in bores and recesses. Compatible with digital uni calipers 240.201–240.205 Conical measuring faces for bore centres Stainless steel construction Ø 15 mm precision contact diameter Accurate centring for bore-to-bore measurements The attachment is engineered to convert a standard digital caliper into a dedicated bore-centre gauge: the conical measuring faces guide the contact point into the bore, reducing lateral play and improving repeatability. With a defined Ø 15 mm contact diameter the insert supplies a consistent reference area that simplifies the measurement of centre distance between two bores. This rational design reduces measurement scatter and supports faster quality decisions in daily inspection work. Robust, low-mass design for repeatable results Made from stainless steel, the accessory resists corrosion and retains geometric integrity under workshop conditions; its compact 48 mm length and light 0.08 kg mass keep the caliper balanced and easy to handle. The material choice and precise machining ensure long service life and minimal wear at the contact faces, which translates into lower maintenance and steady performance across repeated checks. Integrates into inspection routines and production workflows As a purpose-made caliper attachment, this measuring insert installs quickly on compatible digital units and supports straightforward measurement sequences for production and maintenance tasks. By converting existing calipers into specialised gauges, the component contributes to leaner tooling stocks and faster throughput while preserving measurement confidence. Backed by Metav’s distribution and quality filter in Emmerich, the Metav IndustryLine accessory benefits from established supply reliability and the company’s experience in precision metrology — a practical choice for shops aiming to democratise accurate measurement. For reliable bore-centre checks with the Metav IndustryLine M240.253, contact Metav Werkzeuge for application guidance or to request technical details at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: M240.253 GTIN: 4061905053856 Category: Caliper accessory Facts Diameter: Ø 15 mm Weight: 0.08 kg Length: 48 mm Material standard: stainless steel ECLASS: 21170324 Special features Conical measuring faces for centring in bores Compatible with digital uni calipers series 240.201–240.205 Precise contact geometry for bore-centre measurements Caliper accessory for inspection and workshop use FAQ How is the M240.253 used to measure bore centres? The M240.253 is fitted to a compatible digital uni caliper and uses its conical measuring faces to centre in bores, allowing the caliper to capture accurate centre-to-centre distances. Is the insert suitable for corrosion-prone environments? Yes. The insert is manufactured from stainless steel, so the M240.253 offers enhanced resistance to corrosion in typical workshop conditions. Which caliper models are compatible with this attachment? Compatibility is specified for the digital uni calipers series 240.201–240.205; the insert was designed to integrate with those digital units. Does the measuring insert alter caliper handling significantly? The component is compact and lightweight (0.08 kg, 48 mm), preserving the balance and one-handed usability of the instrument while adding specialised bore-centre capability. Can the accessory be used for non-circular features or shallow bores? The conical contact geometry is optimised for standard bores; for irregular or very shallow features, measurement strategy should be reviewed and, if necessary, Metav Werkzeuge’s technical team can advise on suitability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16-150 mm Digital Internal Caliper With Preset, Stainless Steel, Metal Housing, 0.01 mm Resolution, Data Output RB 5 - Metav IndustryLine
Take advantage of the combination of accurate digital readout, robust stainless construction and practical preset function for efficient internal measurements; order the caliper directly via Metav Werkzeuge or consult the Metav team for application advice. Digital Internal Caliper M240.030.N — internal measuring caliper, 16–150 mm, stainless hardened Digital Internal Caliper M240.030.N is a purpose-built instrument for precise internal and groove measurements in workshop and production environments, featuring a digital preset and robust stainless-steel construction. Digital readout with preset function Hardened stainless-steel construction Measuring range 16–150 mm Data output RB 5 interface High-precision internal measurement for everyday workshop tasks The Digital Internal Caliper M240.030.N delivers reliable numerical control in a compact footprint. With a resolution of 0.01 mm (display) and an inch resolution of 0.0005 in, the instrument meets the expectations of standard digital calipers in machining and quality control. Classified as Standard (measuring range up to 100–300 mm), it provides the balance between reach and stiffness that is essential for routine internal checks on parts, bores and grooves. The integrated preset function allows quick zeroing at a chosen datum, cutting setup time and reducing operator adjustments. The numerical readout and steady jaw guidance minimise subjective reading errors and support consistent, repeatable inspection across production batches. Robust design built for shop-floor durability Constructed from hardened stainless steel with a protective metal housing around the electronics, the caliper is engineered for frequent use in industrial settings. The hardened surfaces resist wear from repeated contact with machined components while the metal casing shields the display and controls from impacts and coolant splash. A jaw length of 36 mm provides secure contact in internal grooves and recesses without excessive deflection; the whole instrument weighs 0.56 kg, offering a reassuring balance between solidity and manoeuvrability. Delivered in a transport case (plastic or wooden case depending on version), the tool arrives ready for safe storage and straightforward transport between measuring stations. Connectivity and controls that speed data capture Data transfer is simplified by the RB 5 data output, enabling compatibility with common data loggers and inspection systems for traceable measurement capture. The digital display features dedicated ON/OFF, SET, P+ and P- buttons for intuitive operation: rapid switching of units, preset adjustments and straightforward zeroing reduce measurement cycle time and help maintain throughput. Powered by a 3 V supply, the measuring system is optimised for low energy consumption and reliable performance during shift work. These technical choices translate into measurable efficiency gains on the shop floor and make the instrument a practical component in quality routines and production checks. Designed for practical inspection workflows For engineers and technicians who require repeatable internal readings without complex setup, this caliper combines a clear digital interface with the mechanical robustness expected from workshop metrology. The stainless-steel build and factory standard specification ensure long-term dimensional stability, while the compact internal-measurement geometry supports tasks from small-bore inspections to groove depth checks. Integration of numerical output means results can be archived or processed automatically, fitting into digital quality processes and reducing manual transcription errors. Choose Metav IndustryLine precision for dependable internal measurements — contact Metav Werkzeuge for ordering or technical guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M240.030.N GTIN: 4054469159881 Manufacturer: Metav IndustryLine Facts Measuring range: 16–150 mm Resolution: 0.01 mm / 0.0005 in Weight: 0.56 kg Jaw length: 36 mm Power supply: 3 V Special features Material: hardened stainless steel, metal housing Digital display with ON/OFF, SET, P+, P- buttons Preset function for fast datum setting Data output: RB 5 Delivered in a transport case (plastic or wooden case) FAQ What types of measurements can be performed with this caliper? The Digital Internal Caliper M240.030.N performs internal, bore and groove measurements within its 16–150 mm range and is designed for precise inside-dimension checks. Is the instrument suitable for production quality control? Yes. With a resolution of 0.01 mm and digital output RB 5, the caliper supports routine quality-control tasks and integration into data collection workflows. What materials is the caliper made from and how durable is it? The instrument is made of hardened stainless steel and features a protective metal housing, providing wear resistance and durability for workshop use. Does the caliper include a case for transport and storage? Yes. The tool is delivered in a transport case (plastic or wooden case depending on the item) to protect the instrument during transport and storage. Can measurement data be exported directly to inspection software? Measurement values can be transferred via the RB 5 interface, enabling connection to compatible data loggers and inspection systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Digital Caliper For Bore Spacing With 11mm Display, IP54, ISO 17025 Calibrated - Microtech Metrology
Benefit from traceable calibration, robust protection and USB data output for faster, reproducible bore-distance measurements; this combination reduces rework and speeds quality checks. Take advantage of the ISO 17025 calibration, IP54 dust protection and the 10–160 mm measuring range. Order the digital caliper directly via Metav Werkzeuge or ask our consultants if needed. Microtech Metrology Digital Caliper – ISO 17025 calibrated, USB output The Microtech Metrology digital caliper designed for precise measurement of bore distances in workshop and production environments, featuring a clear digital readout and data interface for seamless documentation. ISO 17025 calibration included USB data output for traceable records IP54 protection for workshop use Hand-finished measuring jaws Traceable calibration and consistent measurement quality A caliper with an ISO 17025 calibration certificate delivers documented traceability that matters in quality control and incoming inspection. The device’s ±0.03 mm stated accuracy together with a 0.01 mm display increment provides a reliable basis for pass/fail decisions and acceptance tests. Having the calibration certificate included means measurement results can be archived and audited without additional calibration steps, reducing downtime and administrative effort. Robust workshop performance and data workflow integration Built for daily use at the bench, this instrument combines IP54 ingress protection with a large, easy-to-read digital display (height 11 mm) and USB data output for direct transfer into quality-management systems. The dust-resistant construction and clear readout reduce reading errors and the risk of contamination-driven faults, while the USB interface streamlines data capture for statistical process control or documentation, increasing throughput and lowering manual transcription errors. Practical handling and accessories for bore-distance tasks With a measuring range of 10–160 mm, this tool fits the Standard class for general machine‑shop and metalworking tasks, offering a practical balance of reach and rigidity. Hand-finished jaws ensure consistent contact geometry for repeatable readings, and the supplied measuring cones (Ø20 mm and Ø35 mm) simplify accurate bore-distance setups. These features reduce setup time and make the instrument suitable for routine checks on fixtures, housings and bores without sacrificing ease of use. Contact Metav Werkzeuge for expert advice on selecting the right Microtech Metrology digital caliper, request the ISO 17025 certificate or arrange prompt delivery from Emmerich Technical data Article number: 141730151 GTIN: 4061905036347 Brand: Microtech Metrology Category: digital calipers Numbers / Core technical data Measuring range: 10–160 mm Resolution (display): 0.01 mm Stated accuracy: ±0.03 mm Digital display height: 11 mm Protection class: IP54 Special features ISO 17025 calibration and certificate included USB data output Hand-finished measuring jaws Accessories included: measuring cones Ø20 mm and Ø35 mm Digital instrument for bore-distance measurement FAQ Is the caliper delivered with an official calibration certificate? Yes. The Microtech Metrology digital caliper is supplied calibrated to ISO 17025 and includes the calibration certificate for documentation and traceability. What is the usable measuring range and classification of the instrument? The instrument offers a 10–160 mm measuring range, placing it in the Standard class, which is ideal for everyday machine‑shop and metalworking measurement tasks. How accurate are the readings and what is the display resolution? Readings are stated at ±0.03 mm with a display resolution of 0.01 mm, suitable for standard quality-control and workshop inspections. Can measurement data be exported directly to a computer? Yes. The device provides a USB data output for direct transfer of measurements into spreadsheets or quality‑management software. Are there accessories included for bore measurements? The delivery includes measuring cones Ø20 mm and Ø35 mm, which facilitate precise bore-distance setups and reduce preparation time. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
160mm Digital Precision Caliper Colour 1.5" Touchscreen, Wireless USB, IP54, ISO 17025 Calibrated - Microtech Metrology
Take advantage of precise measurement, reliable workshop protection and integrated data transfer to keep inspection workflows fast and traceable. The included ISO 17025 calibration certificate and wireless plus USB output make this caliper a practical choice for production and quality control; order directly via Metav Werkzeuge or ask the consultants for configuration advice. Precision Caliper — Microtech Metrology · 1.5" colour touchscreen · Wireless + USB Precision Caliper is a calibrated digital measuring instrument suited to bore-distance checks and general workshop inspection tasks, combining a compact 10–160 mm range with industrial data connectivity. *Colour 1.5" touchscreen display *Wireless and USB data output *Resolution 0.005 mm for fine readings *IP54 protection for workshop environments Reliable accuracy for routine inspection This digital measuring instrument delivers reproducible results through a fine resolution of 0.005 mm and a controlled measuring force range of 1–20 N, which supports consistent contact pressure during runs. Supplied with an ISO 17025 calibration certificate, the device is traceable to international lab standards and suited to formal quality checks. With a measurement span of 10–160 mm it falls into the Standard range for machine‑shop and metalworking tasks, offering the best compromise between reach and rigidity for everyday inspection. Fast data capture that reduces errors Equipped with both Wireless and USB outputs and a 1.5" touchscreen colour display, the caliper streamlines data collection and minimises transcription mistakes. Live transfer via wireless connectivity or direct USB export enables immediate entry into inspection reports or SPC systems, shortening process cycles. The clear digital readout and touch controls speed up repetitive measurements, helping production teams maintain throughput without sacrificing traceability. Built for the workshop, designed for durability The instrument’s IP54 ingress rating protects against workshop dust and water spray, making it robust enough for routine use near machine tools. The construction and ergonomic slider ensure one‑hand operation while preserving measurement stability over the full 10–160 mm travel. The combination of a sealed housing and a responsive display preserves uptime and reduces maintenance interventions in demanding environments. Practical integration into quality workflows This caliper integrates into inspection protocols as a reliable source of verified dimensional data and is suitable for tasks from first‑article inspection to in‑process checks. Supplied by Microtech Metrology and available through Metav Werkzeuge, the unit benefits from a European distribution hub that emphasises consistent stock and documentation. The delivery includes the calibration certificate, enabling direct entry into quality records and easing audit preparation. Contact Metav Werkzeuge to discuss the Microtech Metrology precision caliper with ISO 17025 calibration and integrated Wireless+USB connectivity for seamless inspection workflows Technical data Article number: 141730157 GTIN: 4061905037030 Manufacturer: Microtech Metrology SKU: 141730157 ECLASS: 21170344 Facts Measurement range: 10–160 mm Resolution: 0.005 mm Measuring force: 1–20 N Display: Colour 1.5" touchscreen Protection class: IP54 Special features Digital data output: Wireless + USB Supplied with ISO 17025 calibration certificate Suitable for standard machine‑shop inspections Compact, calibrated digital caliper for bore distances FAQ Is the caliper delivered calibrated? Yes. The Precision Caliper from Microtech Metrology is supplied with a calibration certificate performed to ISO 17025. What is the usable measurement range? The device measures from 10 to 160 mm, placing it in the Standard class ideal for general machine‑shop and metalworking applications. How accurate are the readings? The caliper provides readings at a resolution of 0.005 mm and uses a controlled measuring force of 1–20 N to aid reproducibility. Can measurement data be exported to a PC or SPC system? Yes. Measurement values can be transferred via Wireless connectivity or via USB for immediate integration into inspection or SPC software. Is the instrument suitable for use at the workshop bench? The IP54 rating and sealed electronics make it suitable for routine workshop environments with dust and occasional spray. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
160mm Digital Precision Caliper For Bore Centres, Swiss Digital 11mm Display, IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of precise measurement, robust protection and an included ISO 17025 calibration certificate to streamline quality control and reduce rework. Order the digital caliper directly via Metav Werkzeuge or ask our consultants if needed. Digital Caliper (10–160 mm) by Microtech Metrology — IP67, ISO 17025 calibrated Digital Caliper (10–160 mm) is a workshop-ready precision instrument for machine and metalworking measurement tasks, featuring a Swiss digital display and dust‑ and water‑resistant construction. High-contrast Swiss digital display 11 mm Measurement range 10–160 mm IP67 dust and water protection Delivered calibrated to ISO 17025 Accurate measurements backed by accredited calibration The instrument delivers a 0.01 mm display resolution on a Swiss digital display (height 11 mm), which supports fast, repeatable readings on the shop floor and inspection bench. Supplied fully calibrated to ISO 17025, a traceable calibration certificate accompanies each unit, which reduces uncertainty in quality control processes and simplifies documentation for audits. This certified calibration is particularly valuable where measurement traceability and documented compliance are required. Robust design for everyday workshop use Designed for the typical needs of machining and metalworking, this caliper covers the 10–160 mm range—classified as Standard—so it balances reach with rigidity for frequent one‑hand measurements. The housing and slide are engineered to withstand workshop conditions; the instrument is IP67 rated for protection against dust and temporary immersion, and lubricated components reduce maintenance. Hand‑finished measuring jaws ensure precise contact geometry while the self‑lubricating slide enhances long‑term smoothness and repeatability. Faster inspection, fewer rejects Consistent readings and accredited calibration accelerate inspection cycles and support inline quality control. The clear digital readout minimises interpretation errors and the ergonomic slide enables quick checks of shafts, bore centres and part steps. Where production throughput and first‑pass yield matter, the combination of readable display, robust protection and factory calibration helps reduce rework and keeps assembly and machining processes on schedule. Built to perform in demanding environments The tool was conceived for regular workshop use: sturdy jaw surfaces, a resilient slide mechanism and splash protection make it suitable for busy benches and light production lines. The precise display and factory finishing provide confidence when measuring small tolerances, while the ISO 17025 certificate documents that the caliper meets formal accuracy requirements. For teams upgrading measurement routines, this instrument offers a pragmatic balance of durability and traceable precision. For certified delivery and detailed technical advice about the Microtech Metrology digital caliper, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to discuss specifications and calibration documentation Technical Data Article number: 141730153 GTIN: 4061905036774 Manufacturer: Microtech Metrology SKU: 141730153 Facts Measurement range: 10–160 mm Resolution / reading: 0.01 mm Display: Swiss Digital, height 11 mm Protection class: IP67 Calibration: ISO 17025 certificate included Special features Hand‑finished measuring jaws Self‑lubricating slide Digital caliper design Standard class measurement range (10–160 mm) FAQ What measurement range does the caliper cover? The digital caliper covers a range of 10–160 mm, making it suitable for standard workshop and machine‑shop tasks (SKU 141730153). Is an official calibration certificate supplied? Yes, the caliper is delivered with a full ISO 17025 calibration certificate issued for the Microtech Metrology digital caliper. How resistant is the instrument to dust and liquids? The unit is rated IP67, which protects against dust ingress and temporary immersion, suitable for harsh workshop environments. What display resolution can be expected? The Swiss digital display provides a 0.01 mm resolution for rapid and precise readings. Are the measuring jaws finished for accuracy? The measuring jaws are hand‑finished, providing precise contact geometry to support repeatable measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
160mm Digital Precision Caliper for Bore Spacing, Swiss Digital Display 11mm, IP67, ISO 17025 - Microtech Metrology
Compact, factory-calibrated performance with rugged protection: the combination of ISO 17025 traceable calibration, IP67 ingress resistance and a Wireless data output ensures dependable measurements in demanding shop-floor conditions. Order the calibrated caliper directly via Metav Werkzeuge or consult our specialists for application advice. Caliper by Microtech Metrology — 10–160 mm, Wireless, ISO 17025 calibrated Caliper by Microtech Metrology is a digitally driven measuring tool designed for standard workshop and machine‑shop tasks, combining a Swiss digital readout with wireless data transfer for efficient quality control. Swiss Digital display, 11 mm height Wireless data output for traceable logging ISO 17025 calibrated with certificate IP67 protection for harsh environments Reliable measurement workflow with industrial connectivity This caliper brings wireless data output into routine measurement tasks, allowing measured values to be transferred directly to logging systems or inspection software without manual transcription. The Swiss Digital display with 11 mm numerals ensures clear legibility even under workshop lighting, while the sealed electronics meet IP67 protection, keeping the unit functional during exposure to coolants or fine particulates. Together, these features reduce transcription errors and speed up inspection loops, which contributes directly to process reliability and traceability. Precision and handling tailored to everyday shop use Classified as a standard caliper for the 10–160 mm range, this instrument balances reach and rigidity for common machining and metalwork requirements. The instrument is equipped with hand-crafted measuring jaws, which improves contact repeatability and reduces measurement scatter on uneven surfaces. The slide is self-lubricating, providing smooth motion and stable zero retention during repeated measurements. These design choices support consistent results in production environments where repeatability matters more than extreme-range capability. Calibration confidence and documentation for quality control Delivered fully calibrated to ISO 17025, the caliper includes a calibration certificate suitable for internal quality records or external audits. This formal calibration level confirms metrological traceability and documents instrument performance against recognised standards. For customers implementing documented inspection procedures, the provided certificate simplifies instrument acceptance and periodic control scheduling, ensuring that measurement data remain auditable and comparable over time. Built for workshop durability and practical use Durable construction and protective sealing combine with a compact form factor to offer a practical inspection tool that keeps pace with everyday production demands. The IP67 rating means the unit withstands dust ingress and temporary immersion, while the robust digits and tactile slide ensure the readout remains usable after routine handling. Wireless transfer capability further reduces handling steps and makes integration into digital quality systems straightforward, enhancing throughput without compromising measurement integrity. Contact Metav Werkzeuge for tailored procurement or application advice on the Microtech Metrology caliper — calibrated to ISO 17025 and ready for immediate use; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: 141730154 Brand: Microtech Metrology GTIN: 4061905036781 ECLASS: 21170344 Core technical values Measurement range: 10–160 mm Resolution: 0.01 mm Display height: 11 mm Protection class: IP67 Calibration: ISO 17025 certificate included Special features Wireless data output Swiss Digital display Hand-crafted measuring jaws Self-lubricating slide Digital caliper design FAQ What measurement range does this caliper cover? The caliper covers a measuring span from 10 mm up to 160 mm, making it suitable for standard machine‑shop and workshop inspections. Is the device delivered with calibration documentation? Yes, the Microtech Metrology caliper is supplied fully calibrated to ISO 17025 and includes the corresponding calibration certificate for traceability and audit purposes. Can measurement data be transferred electronically? Measurement values can be transmitted via the unit's wireless data output, enabling seamless logging into inspection or SPC systems without manual entry. How robust is the caliper for use in a machining environment? The instrument features IP67 protection, a self‑lubricating slide and hand‑crafted jaws, offering resistance to dust and coolant and stable operation during regular shop use. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
170mm Digital Internal Caliper With Preset, Stainless Hardened Steel, 0.01mm Resolution, Case - Metav IndustryLine
Take advantage of the combination of workshop‑grade robustness, precise 0.01 mm digital resolution and handy RB 5 data output to streamline inspection routines; the hardened stainless‑steel construction and supplied protective case support repeatable results and safe transport. Order the Digital internal caliper M240.031.N directly via Metav Werkzeuge or consult our experts for application advice. Digital internal caliper M240.031.N — 22–170 mm, hardened stainless steel, 3 V A Digital internal caliper M240.031.N designed for precise internal and groove measurements in workshop and quality‑control environments, offering factory‑standard delivery and straightforward data transfer. Precise 0.01 mm digital resolution Hardened stainless‑steel construction Measuring range 22–170 mm for standard tasks RB 5 data output for process logging Supplied in protective case Faster, more reliable internal measurements for production control The electronic readout with a resolution of 0.01 mm (≈ 0.0005 in) delivers clear numeric values that reduce interpretation errors and speed up routine inspections. The integrated SET and P+/P‑ functions allow quick preset and incremental adjustments, enabling consistent zeroing and repeated comparative checks. This analytic clarity benefits inspection teams by shortening cycle times and lowering the risk of rework through more reliable measurement records. Built for everyday workshop use: stainless, hardened and transport‑ready Constructed from hardened stainless steel with a metal housing, the instrument resists shopfloor wear and maintains stiffness across the 22–170 mm range, which classifies it as a standard caliper for general machine‑shop and metalworking tasks. A measured jaw length of 36 mm supports secure internal contact for grooves and bores, while the supplied protective case ensures safe transport and storage. These features combine to protect calibration status and extend service life in demanding environments. Integrates with digital workflows and simplifies traceability Equipped with RB 5 data output and powered by a 3 V cell with preset capability, the instrument links measurement tasks to data‑collection systems for statistical process control or digital logging. The compact display with ON/OFF and function keys provides practical operation during inspection runs and the lightweight construction (~0.6 kg) makes single‑operator handling easier during repetitive checks. The factory standard configuration supports consistent starting conditions for series inspection. Enquire with Metav Werkzeuge to confirm compatibility with inspection routines and to arrange delivery from our Emmerich stock Technical data SKU: M240.031.N GTIN: 4054469159898 Label: Digital internal caliper, 22–170 mm, 3 V with preset, INOX, factory standard Manufacturer: Metav IndustryLine Core measurements Measuring range: 22–170 mm Resolution: 0.01 mm Resolution (inch): 0.0005 in Weight: 0.6 kg Jaw length: 36 mm Features Digital display with ON/OFF, SET, P+, P‑ Data output: RB 5 Material: hardened stainless steel, metal housing Supplied in protective case for transport Factory standard delivery FAQ What internal dimensions can be measured with this caliper? The caliper measures internal diameters and groove widths within its 22–170 mm range; the Digital internal caliper M240.031.N is optimised for standard workshop components. Is the caliper suitable for repeated shopfloor use? Yes, the hardened stainless‑steel construction and metal housing make the instrument durable for everyday use, and the supplied protective case reduces transport and storage risks for the M240.031.N. How precise is the digital readout and how is data exported? The display reads to 0.01 mm (≈ 0.0005 in) and supports RB 5 data output for connection to data‑collection systems or SPC workflows. Does the instrument come ready for immediate measurement? The tool is supplied to factory standard with preset functionality and a 3 V power system; initial setup is straightforward for measurement tasks. Which workshop applications suit this caliper best? With its 22–170 mm range and robust build, it serves general machine‑shop quality control, jigs and fixtures inspection, and routine internal or groove measurements. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision where standard calipers reach their limits
Specialised calipers (also available as specialist calipers and precision calipers) are engineered for measurements that conventional calipers cannot perform reliably. With custom‑shaped jaws, extended measuring ranges and advanced materials, these tools deliver reproducible results down to the micrometre range, making them indispensable for difficult‑to‑access features such as fine grooves, deep bores and complex contours.
How these calipers tackle demanding measurement tasks
Specialised calipers work by adapting jaw geometry and sensing technology to the application: pointed, blade‑shaped, round or offset jaws capture inside and outside dimensions in confined geometries, while digital, analogue and inductive sensing cover different shop and lab requirements. Digital variants offer quick readouts and data transfer via Bluetooth/USB; analogue models remain reliable in humid or rough workshop environments; inductive versions provide extreme accuracy of ±0.001 mm (1 μm), suited to inspection rooms and laboratories. Wear‑resistant materials such as carbide or ceramic tips withstand coolants, abrasion and corrosion for sustained accuracy.
Measurable benefits for production and inspection
- Faster, repeatable measurements in constrained geometries, reducing inspection time.
- Reproducible results to the micrometre range, raising process reliability.
- Longer service life thanks to carbide or ceramic tips, lowering tool replacement frequency.
- Seamless data integration: digital specialised calipers can feed results directly into CAQ systems via Bluetooth/USB, supporting inline quality control.
- Robust performance across environments—from workshop floors to clean labs—thanks to analogue and inductive options.
Metav as a dependable partner for precision measurement
Metav combines decades of expertise with a comprehensive selection for industry, craft and trade. From Emmerich, Metav operates as a quality filter for the European market, supplying high‑precision tools across more than 250,000 product lines. Trusted by over 48,000 customers, Metav makes high accuracy accessible to every workshop while ensuring reliable fulfilment and consistent product quality.
FAQ
What accuracy can I expect from specialised calipers?
Inductive specialised calipers achieve extreme accuracy of ±0.001 mm (1 μm); digital models enable quick readout and transfer, while analogue versions provide reliable shop‑floor stability.
Which jaw shapes are available and what are they best for?
Specialised calipers come with pointed, blade‑shaped, round and offset jaws designed to measure features such as wall thickness of glass ampoules, gear tooth profiles and O‑ring grooves that standard calipers cannot access.
Can specialised calipers be used for inline quality control?
Yes. Digital specialised calipers with Bluetooth/USB support direct data transfer to CAQ systems, enabling inline testing and automated documentation in series production.
Are there variants suited to harsh workshop environments?
Analogue specialised calipers are less sensitive to moisture and rough handling, and units fitted with carbide or ceramic tips resist coolants, abrasion and corrosion for durable, accurate performance.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com