Precision specialist calipers for inaccessible measurements
Specialist calipers are engineered to measure fine grooves, deep bores and complex contours with reproducible accuracy down to the micrometre, delivering reliable results where standard calipers reach their limits. Designed with customised jaw shapes and robust materials such as carbide or ceramic tips, these calipers excel in measuring thin-walled aerospace structures, medical implants and intricate toolroom cavities while resisting coolants and abrasion. Available as digital, analogue and inductive variants, they offer options from quick-read displays and data transfer to extreme accuracy of ±0.001 mm for laboratory use. By combining tailored jaw geometries with durable construction, these precision tools improve inline quality control and support both prototype and series production.
170mm Digital Internal Caliper With Stem, Preset, Stainless Steel, Plastic Case - Metav IndustryLine
Take advantage of the combination of reliable standard-range measurement, a dedicated probe for internal grooves and user-friendly digital presetting for smoother inspection routines — order the instrument directly via Metav Werkzeuge or consult our technical advisers for tailored advice. Digital Internal Caliper M240.041.N — 20–170 mm range, probe, stainless hardened steel (Metav IndustryLine) The Digital Internal Caliper M240.041.N is a workshop-ready stainless steel digital caliper designed for precise internal and groove measurements across machine shops and production benches. Digital display with preset function Measurement range 20–170 mm Hardened stainless steel construction Probe for internal groove measurement Reliable standard-range measurement for everyday workshop tasks The instrument is a Standard‑class caliper with a measurement range of 20–170 mm, offering the best compromise between reach and rigidity for general machining and metalwork. Its 0.01 mm display resolution corresponds to typical digital calipers used in production control, enabling repeatable internal measurements and simple comparison checks. Built to a factory norm, the device features a compact probe that facilitates groove and internal slot measurement while preserving jaw stiffness for consistent results. Practical digital functions that accelerate inspection work Equipped with an electronic display including ON/OFF and ZERO/PRESET controls, the caliper reduces setup time for repetitive tasks and supports quick reference measurements. The preset function simplifies transfer of a master dimension, cutting adjustment cycles on the shopfloor. A dedicated data output (RB 5) provides an option for traceable measurement recording where a digital link to SPC systems is required. At around 0.5 kg, the instrument balances robustness with ergonomic handling and is supplied in a transport case for safe storage and workshop mobility. Built for durability and consistent production quality Constructed from stainless hardened steel with a metal housing, the tool resists workshop wear and maintains measurement integrity under frequent use. The probe design is particularly suited to internal notches and grooves common in fixtures and assemblies, reducing the need for improvised gauges. Delivered to the Metav quality standard and tested for practical use in industry, this caliper supports lower rework rates and steadier quality inspection throughput — aligning with Metav’s emphasis on accessible precision for workshops and small industrial operations. For internal measuring tasks that require repeatability and a dedicated probe, contact Metav Werkzeuge for guidance on the Metav IndustryLine Digital Internal Caliper; technical consultants at Metav Werkzeuge can advise on suitability and delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M240.041.N GTIN: 4054469159959 Category: Calipers / Measuring instruments Facts Measurement range: 20–170 mm Resolution: 0.01 mm Weight: 0.5 kg Commodity code: 90173000 Special features Hardened stainless steel construction Metal housing Probe for internal groove measurement Digital display with ON/OFF and ZERO/PRESET buttons Data output: RB 5 Supplied in a transport case Factory standard compliance FAQ What measurement range does the caliper cover? The caliper covers an internal range of 20–170 mm, making it a standard workshop instrument for most internal and groove measurements. What display resolution is provided and how precise are readings? The instrument features a 0.01 mm digital resolution, suitable for production control and routine dimensional checks. Is the device suitable for measuring internal grooves and slots? Yes. The caliper is supplied with a probe designed specifically for internal groove measurement, improving accessibility and repeatability in such applications. Does the caliper offer data output for documentation or SPC? The caliper includes an RB 5 data output for digital data transfer, enabling integration with data-collection workflows where required. Is the caliper delivered ready for workshop use and how is it supplied? The caliper is delivered with a metal housing and is supplied in a transport case to protect the instrument during storage and transport. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2-20mm Thread Measuring Attachment 30° Tr Pitch Gauge Set, 12 Pieces - Microtech Metrology
The set of interchangeable 30° measuring inserts for thread inspection delivers consistent, repeatable results across a thread range of 2–20 mm while simplifying on‑tool changeovers. Take advantage of compact probe geometry, modular handling and traceable identification; order directly via Metav Werkzeuge or consult their technical advisers for compatibility and supply. Measuring attachment — TR 30° thread measurement, 2–20 mm | Microtech Metrology The measuring attachment is a modular set of 30° probe inserts designed for precise inspection of threads from 2–20 mm, suited to metrology benches and inspection fixtures in industrial workshops Thread range 2–20 mm 30° probe tip geometry Set of 12 interchangeable inserts Precise thread inspection for metrology Precise thread checks with compact probe geometry The 30° probe tip geometry is engineered for reliable contact with flank forms while keeping the measuring head compact. With a declared thread range of 2–20 mm, the attachment supports inspection of small to medium thread forms without compromising accessibility in confined fixtures. The compact design reduces probe overhang and helps maintain repeatability by lowering lever effects during measurement, which translates into fewer reworks and improved process reliability. Modular set reduces machine downtime and speeds workflows Delivered as a set of 12 interchangeable inserts, the system allows swift replacement of worn tips or rapid configuration changes between batch runs. The modular concept minimises fixture downtime and simplifies inventory handling, because identical insert geometries can be stocked and exchanged quickly. Traceable markings on each insert and the central SKU aid in process documentation and ensure that measurement routines remain consistent across shifts and operators. Documented identification and workshop integration The attachment is supplied with clear identification (GTIN and SKU) for inventory and traceability, facilitating integration into existing inspection protocols. The combination of compact tip geometry and a standardised set format supports straightforward mounting on common metrology fixtures and thread gauges. Technical documentation and compatibility details are available to support device selection and to align the component with quality assurance workflows. Contact Metav Werkzeuge for delivery and technical advice on integrating Microtech Metrology measuring attachments; Metav Werkzeuge can advise on suitability for specific inspection systems and ensure prompt supply from their Emmerich quality centre. Technical data Article number: 141377300T GTIN: 4061905458675 Manufacturer: Microtech Metrology Pieces per set: 12 Numbers Thread range: 2–20 mm Tip angle: 30° Pieces per set: 12 Special features Set of interchangeable measuring inserts Designed for thread measurement applications SKU included for traceability FAQ What thread sizes can be inspected with this attachment? The measuring attachment covers threads from 2–20 mm, making it suitable for small to medium thread inspection tasks in workshop and production environments. How is the product supplied and what is included? The product is supplied as a set containing 12 interchangeable inserts intended for thread measurement; the set is identified by SKU 141377300T (Microtech Metrology). What is the tip geometry and why does it matter? The probes use a 30° tip geometry, which is selected to make accurate flank contact while preserving accessibility in confined measurement setups, supporting repeatable readings. Can this attachment be used with standard metrology fixtures? Yes, the design is intended for straightforward integration with common metrology benches and inspection fixtures; refer to the technical documentation for specific mounting interfaces. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2-40mm Digital Five-Point Pocket Caliper Stainless Hardened Steel, 0.01mm Resolution, With On/Off mm/inch/Set Buttons, In Case - Metav IndustryLine
Take advantage of precise five-point checks, compact handling and a clear digital readout for efficient inspection workflows; order directly via Metav Werkzeuge or request specialist advice from our consultants. Digital Five-Point Pocket Caliper M240.142 — compact stainless steel caliper with digital display and 2–40 mm range (Metav IndustryLine) The Digital Five-Point Pocket Caliper M240.142 is a compact measuring instrument designed for rapid five-point inspection of small components and multi-edged tools in workshop and inspection environments Five-point measurement for multi-surface checks Measuring range 2–40 mm for small components Stainless hardened steel construction Digital display with mm/inch and SET button Precision where small dimensions decide quality The instrument combines a dedicated five-point measurement geometry with a 0.01 mm display resolution to deliver repeatable checks on polygonal and multi-flank features. This arrangement reduces the need for multiple setups: a single instrument captures several contact points to verify diameters and concentricity quickly. The compact contact heads are beneficial when handling small cutters, inserts or precision parts where dimensional certainty prevents downstream rework and scrap. Robust, compact design for everyday workshop use Engineered from stainless hardened steel, the caliper balances corrosion resistance and stiffness in a pocket-sized format that suits bench and mobile inspection tasks. With a 2–40 mm measuring span it fits the class of a micro caliper, offering the right trade-off between reach and torsional rigidity for fine‑mechanical work. The hardened beam and wear-resistant jaws extend service life under frequent use and contribute to a stable measuring baseline in production environments. Fast digital operation to speed up quality control The clear digital display includes mm/inch switching, an on/off function and a SET button for zeroing, enabling quick comparison measurements and simple data capture steps during inspection rounds. Readability at 0.01 mm supports standard workshop tolerances and helps to streamline sampling without elaborate fixtures. The five-point routine simplifies control of multi-edge tools by consolidating several readings into one operation, improving throughput and lowering inspection time per part. For dependable five-point checks choose the Metav IndustryLine digital pocket caliper and contact Metav Werkzeuge for tailored advice or ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M240.142 GTIN: 4054469112930 Brand: Metav IndustryLine Label: Digital-FünfpunkTaschen-Messschieber, 2 - 40 mm rostfrei, 0,14 kg Key figures Measuring range: 2–40 mm Resolution: 0.01 mm Display inch resolution: 0.0005 in Weight (as stated on label): 0.14 kg Features & materials Material: stainless hardened steel Measurement method: five-point measurement Display functions: ON/OFF, mm/inch, SET Application: five-point inspection of small components and multi-edged tools FAQ What kinds of measurements does this caliper perform? The caliper performs five-point measurements suitable for checking multiple contact points on polygonal profiles and small cutting tools; the integrated digital display provides the reading in 0.01 mm increments for consistent inspection. Is the device suitable for use in a production environment? Yes, the compact stainless hardened construction and the digital display with mm/inch switching make the instrument suitable for routine quality control and mobile inspection tasks in production. How is the caliper best used for multi-edged tools? By using the five-point measurement routine the instrument reduces setup steps: the profile can be assessed across several contact points in one sequence to detect runout and dimensional deviations efficiently. Does the caliper offer inch measurements? Yes, the display supports mm/inch switching and shows an inch resolution equivalent to 0.0005 in for cross‑unit checks. Which Metav product line supplies this caliper and how is it identified? This caliper belongs to Metav IndustryLine and is listed under article number M240.142 for ordering and inventory purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20 mm Bore Distance Measuring Insert 60° Length 70 mm, For Caliper Adapter - Metav IndustryLine
Compact, precise and workshop-ready: the insert for 20 mm bore spacing at 60° with a 70 mm insertion length enables reproducible checks of hole patterns and straightforward adapter fitment — order the component via Metav Werkzeuge or consult our specialists for compatibility. Bore-spacing measuring insert 20 mm — measuring insert for caliper adapter, 60°, 70 mm length (Metav IndustryLine) Bore-spacing measuring insert 20 mm for caliper adapter — a compact metrology accessory tailored to check hole centres and angular offsets on small assemblies with a rigid 70 mm reach For Ø20 mm bore spacing at 60° 70 mm insertion length for extended reach Ø5 mounting shank for standard adapters Lightweight 0.05 kg for easy handling Reproducible bore-centre checks for small assemblies This measuring insert turns a standard caliper adapter into a dedicated tool for verifying 20 mm bore spacing at 60°, providing a quick and repeatable method to confirm hole patterns without bespoke fixtures. The accessory is designed for straightforward alignment with an adapter, so typical inspection tasks in quality control or assembly become more efficient. By avoiding improvised gauging solutions, production checks gain in repeatability and throughput, while measurement uncertainty is reduced through consistent mechanical fit. Compact design that reaches where it matters With a 70 mm insertion length and an Ø5 mounting shank, the component offers access into recesses and across small assemblies while remaining simple to handle. The modest mass (0.05 kg) contributes to easy mounting and minimal loading on the caliper adapter, keeping the measuring chain stable during manual checks. The compact form factor is especially useful in bench-level inspections and during set-up of jigs where a slim, rigid probe is preferable to larger instruments. Practical fitment and workshop applications Suited for use with caliper adapters that accept an Ø5 shank, this insert is a practical addition for workshops and inspection benches that perform repeated hole-centre verifications. Typical applications include component incoming inspection, prototype checks and fast in-line spot checks where a dedicated gauge would be impractical. Metav IndustryLine supplies this accessory as part of a broader range that aims to make high-quality metrology accessible for the workshop environment, supporting reliable supply and transparent order handling from Emmerich. Contact Metav Werkzeuge to confirm adapter compatibility or to request delivery from our Emmerich warehouse; our specialists will advise on integration and availability Technical information Article number: M240.324 GTIN: 4054469159560 ECLASS: 21170324 SKU: M240.324 Core data Length: 70 mm Weight: 0.05 kg Mounting diameter: Ø5 Analog: yes Special features For Ø20 mm bore spacing at 60° For caliper adapter (20 mm) Category: Measuring devices / Accessories Tariff number: 90178090 FAQ What bore spacing and angle does the insert check? The insert is designed for a 20 mm bore spacing at 60°, enabling direct verification of that hole pattern. Which mounting interface is required for use with adapters? The component uses an Ø5 mounting shank and is intended for caliper adapters that accept that diameter. Is the insert suitable for handheld caliper inspections? Yes — the lightweight design (0.05 kg) and 70 mm reach make it appropriate for bench and handheld checks when used with a compatible adapter. Can this insert be used with analogue calipers? The accessory is compatible with caliper adapters for analogue and digital calipers, provided the adapter accepts an Ø5 shank and the caliper provides stable seating. What is the article number or SKU for ordering? The article number and SKU is M240.324 for ordering and stock reference. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20-1020mm Digital Precision Caliper With Wireless Output, Swiss Digit Display 11mm, IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of a robust, long-range measuring instrument that combines wireless data output, an IP67-protected build and ISO 17025 calibration for dependable traceability on large components; order directly via Metav Werkzeuge or consult the Metav team for application advice. Microtech Metrology digital caliper — 20–1,020 mm, Wireless, IP67 The Microtech Metrology digital caliper is a long-range, workshop-grade measuring instrument designed for precise inspection of large assemblies and fixtures in production and toolmaking. Wireless data output IP67 dust and water protection ISO 17025 calibration certificate included Measuring range 20–1,020 mm Measure large components with reproducible accuracy A measuring range of 20–1,020 mm places this instrument in the long-range category, engineered to handle large components while limiting measurement uncertainty due to deflection. The extended span suits inspection of sizable housings, fixtures and long shafts where reach and repeatability matter. The supplied measurement cones Ø20 mm and Ø35 mm adapt the jaws for bore and stepped measurements, making the caliper versatile for inside and outside dimensions as well as stepped features. Capture data quickly and integrate with quality systems Equipped with a Swiss Digit display (height 11 mm) for clear readout, the caliper offers resolution 0.01 mm and an accuracy ±0.04 mm, enabling efficient digitisation of routine checks. The wireless data output simplifies transfer to inspection software or SPC systems, reducing transcription errors and accelerating documentation. For production environments this means fewer manual entries, faster batch reports and an overall improvement in process control. Built for the shop floor — robust and easy to handle An IP67 rating ensures the instrument withstands dust, coolant splash and the hazards of everyday workshop use. The sealed electronics and rugged slider enable reliable operation in less-than-ideal conditions, while the long-format design follows light-construction principles to keep deflection manageable during handling. The result is a durable metrology tool that remains serviceable over repeated use and transport. Traceable calibration for audit-ready measurement This instrument is delivered fully calibrated with an ISO 17025 calibration certificate, providing traceability for internal QA and external audits. The certificate documents measurement conformity and simplifies acceptance into inspection routines; it also reduces initial setup time for laboratory and production acceptance. For supply chains that demand documented proof of measurement capability, the calibrated instrument supports quality assurance and supplier validation processes. Contact Metav Werkzeuge for a tailored consultation on how Microtech Metrology long-range digital calipers with ISO 17025 calibration can be integrated into inspection workflows — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 141731014 GTIN: 4061905452604 Manufacturer: Microtech Metrology Display: Swiss Digit, height 11 mm Data output: Wireless Accessories: Measurement cones Ø20 mm and Ø35 mm Facts Measuring range: 20–1,020 mm Resolution: 0.01 mm Accuracy: ±0.04 mm IP rating: IP67 Special features ISO 17025 calibration certificate included Long-range caliper category (≥1,000 mm) Digital readout for fast measurement capture Suitable for workshop and production environments FAQ What is the measuring range of the instrument? The measuring range is 20–1,020 mm for the Microtech Metrology digital caliper (SKU 141731014), suitable for large components and assemblies. Is a calibration certificate supplied with the caliper? Yes, the caliper is supplied fully calibrated with an ISO 17025 calibration certificate, enabling traceability for quality assurance. How precise is the digital readout? The instrument offers a resolution of 0.01 mm and an accuracy of ±0.04 mm, combining clear readout with reliable repeatability for workshop inspection. Can measurement data be transferred electronically? Yes, the caliper features wireless data output, designed to simplify transfer to inspection software and reduce manual data entry. Which accessories are included for specialised measurements? The delivery includes measurement cones Ø20 mm and Ø35 mm to extend the caliper’s capability for bore, step and specialised internal measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
20-170mm Digital Precision Caliper Colour 1.5" Touchscreen, Wireless+USB, IP54 - Microtech Metrology
The combination of high-resolution 0.005 mm measurement, Wireless + USB data transfer and IP54 protection ensures reliable results on the shop floor and in the inspection room; benefit from precise readings and straightforward data capture. Order the caliper directly via Metav Werkzeuge or consult the Metav team for application advice. Digital Caliper by Microtech Metrology — 1.5" colour touchscreen, Wireless + USB Digital Caliper is a compact precision measuring instrument for external measurements across general workshop, metalworking and quality‑control tasks. 1.5" colour touchscreen display Wireless and USB data output Measurement range 20–170 mm IP54 splash and dust protection Precision and performance tailored to common workshop needs This precision instrument covers a 20–170 mm range, placing it in the Standard class for machine and metalworking tasks where reach, stiffness and one‑hand operation must be balanced. The 0.005 mm readout gives finer resolution than typical digital calipers, reducing uncertainty in routine inspections and enabling tighter tolerance checks without moving to larger, more specialised devices. Shorter jaws and a compact carriage support repeatable contact geometry, helping to keep measurements consistent across batches. Seamless data capture that speeds quality routines Integrated Wireless and USB outputs allow immediate transfer of readings to spreadsheets or quality‑management systems, cutting transcription errors and accelerating documentation. The 1.5" touchscreen provides a clear, fast interface for zeroing, unit changes and quick checks, while the digital electronics maintain stable readings for efficient sampling. These characteristics translate into measurable productivity gains when logging part dimensions or compiling inspection reports. Robust build for everyday shop use An IP54 rating guards against dust ingress and splashing coolant or cutting fluids, extending reliable service life in workshop environments. The caliper’s 25 mm jaw length provides secure contact for typical external measurements, while the compact frame aids handling in confined set‑ups. Materials and finish are chosen for routine wear resistance; the construction focuses on reproducibility and low maintenance rather than fragile lab‑only features. Practical integration into inspection workflows The measuring tool is designed as a pragmatic interface between bench measurement and digital quality systems. With the combined data outputs and a readable colour display, the device becomes a bridge for fast traceability and batch documentation. For engineering teams and quality departments seeking a dependable measuring device for standard parts, the instrument delivers a solid compromise of accuracy, connectivity and ruggedness, helping to streamline inspection steps and reduce rework. For reliable, connected measurement solutions from our Emmerich stock, contact Metav Werkzeuge about the Microtech Metrology digital caliper (SKU 141430157) for expert advice and rapid dispatch. Technical Data Article number: 141430157 GTIN: 4061905037917 Manufacturer: Microtech Metrology Facts Measuring range: 20–170 mm Resolution: 0.005 mm Display: 1.5" colour touchscreen Jaw length: 25 mm Special features Data output: Wireless + USB Protection class: IP54 Digital device for external measurements Digital display model FAQ How accurate is the instrument for workshop inspections? The caliper from Microtech Metrology delivers a resolution of 0.005 mm, which improves repeatability for standard workshop inspections and smaller tolerance checks. Can measurements be exported to a PC or inspection software? Yes, the device supports Wireless and USB data transfer so readings can be exported directly to spreadsheets or quality‑management systems. Is the caliper suitable for use at machine benches with coolants present? The IP54 rating offers protection against dust and splashing liquids, making the instrument suitable for typical machine‑shop environments. What measurement range does the tool cover and what class is it? The instrument measures from 20–170 mm, which places it in the Standard class for everyday machine and metalworking tasks. Which manufacturer produces this caliper and what is the article number? The caliper is supplied by Microtech Metrology; the article number is 141430157 and the GTIN is 4061905037917. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
20-2020mm Digital Precision Caliper For Bore Spacing With Wireless USB, Colour 2.4" Display, IP54, ISO 17025 Calibrated - Microtech Metrology
Taking advantage of a wide measurement range up to 2020 mm, reliable Wireless + USB data transfer and full ISO 17025 calibration, this instrument supports precise, traceable inspection of large components. Order directly via Metav Werkzeuge or contact our consultants for application advice and delivery options. Digital Caliper 20–2020 mm with Wireless + USB and 2.4" colour display by Microtech Metrology The digital caliper is a long‑span measuring instrument designed for dimension checks on large components and assemblies in workshop and plant environments Wireless and USB data output Colour 2.4" display for clear readouts Delivered calibrated to ISO 17025 with certificate Measuring range up to 2020 mm Precision over extended spans for reproducible results With a measuring range from 20 to 2020 mm, this Extra‑Long caliper closes the gap between bench instruments and heavy‑duty length gauges. The specified accuracy of 0.06 mm reflects the instrument’s tolerance band and is suited to many assembly, jig and fixture tasks where centimetre‑to‑metre accuracy is required. The built‑in measurement control and a measuring force range of 1–20 N help to reduce operator variability: a consistent contact pressure makes repeated measurements more reproducible, which speeds up inspection cycles and lowers rework rates. Faster reporting and fewer transcription errors Data capture is simplified by the combined Wireless and USB outputs, allowing measured values to be transferred directly to inspection software or spreadsheets without manual entry. The 2.4" colour display gives immediate visual confirmation of values and units, reducing interpretation mistakes on the shopfloor. IP54 protection maintains readout reliability in dusty or slightly damp environments, so transfer and logging remain uninterrupted during routine production checks and audits. Ready for audit trail and quality documentation This caliper is supplied fully calibrated to ISO 17025, including a calibration certificate for traceability and quality records. That documented conformity supports supplier audits and internal quality control procedures and removes an administrative step from incoming‑inspection or first‑article reporting. The delivery also includes two measuring cones, Ø20 mm and Ø35 mm, to aid accurate bore‑to‑bore and offset measurements on shafts and housings. Workshop durability with practical handling features Designed for use with larger components, the device balances long measuring capacity and ergonomic handling to aid single‑operator workflows where feasible. The IP54 rating shields critical electronics from typical workshop contaminants, while the rugged construction sustains repeated use across production shifts. Supplied accessories and robust data interfaces support integration into existing measurement routines, making the instrument a practical choice for manufacturing, toolroom and inspection departments that require traceable long‑length measurements. Contact Metav Werkzeuge in Emmerich for tailored application advice, a copy of the calibration certificate or to arrange delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: 141732017 GTIN: 4061905452420 Manufacturer: Microtech Metrology Numbers / Core Technical Data Measuring range: 20–2020 mm Accuracy: 0.06 mm Measuring force: 1–20 N Display size: 2.4 inches (colour) Protection class: IP54 Special features Digital caliper with Wireless + USB data output Delivered calibrated to ISO 17025 with calibration certificate Accessories included: measuring cones Ø20 mm and Ø35 mm Ideal for long‑length component inspection FAQ What calibration documentation is delivered with the instrument? The digital caliper (SKU 141732017) by Microtech Metrology is delivered fully calibrated to ISO 17025 and includes a calibration certificate suitable for audit and traceability purposes. Is the measuring range suitable for large components such as housings or long shafts? Yes; the instrument’s measuring range extends to 2020 mm, making it appropriate for large housings, shafts and assemblies where a caliper‑based measurement is required. How are measured values exported to inspection software? Measured values can be exported via the built‑in Wireless interface or through USB, enabling direct transfer to spreadsheets or quality management systems without manual re‑entry. What level of workshop protection does the device offer? The caliper carries an IP54 rating, providing protection against dust ingress in typical workshop conditions and splashing water, which helps maintain reliable readings on the shopfloor. Which accessories are included for specialised measurements? The delivery contains measuring cones Ø20 mm and Ø35 mm to facilitate bore and offset measurements on cylindrical components and features. What is the expected measurement uncertainty for routine checks? The nominal accuracy is 0.06 mm; actual measurement uncertainty in your process will depend on fixturing, operator technique and environmental conditions—consistent measuring force and the supplied calibration certificate help to quantify and document that uncertainty. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
20-2020mm Digital Precision Caliper Wireless Three-Point Readout, IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of ISO 17025 traceable calibration, a 20–2020 mm measuring range and wireless data transfer to speed up inspection and reduce rework; order the caliper directly via Metav Werkzeuge or consult our specialists for integration advice. Digital Caliper by Microtech Metrology — Wireless, ISO 17025 calibrated, 20–2020 mm Digital Caliper is a high‑range precision measuring instrument designed for large components and traceable inspection workflows Wireless data output for digital workflows ISO 17025 calibration with certificate Wide range 20–2020 mm for large components IP67 protection for harsh workshop environments Precise, traceable measurements for production control This instrument delivers reliable measurements across a very large span, with a measuring range of 20–2020 mm that classifies it among extra‑long calipers for large components. The factory calibration is carried out to ISO 17025 standards and is supplied with a calibration certificate, which provides documented traceability for quality systems and audit trails. The stated accuracy of 0.06 mm gives a clear expectation for inspection tolerances and supports decision‑making in final inspection and incoming goods control. Integrates with digital quality systems to save time Equipped with wireless data output and a clear Swiss Digit display (11 mm digit height), the instrument is tailored to modern metrology workflows where measurement data must be captured reliably and without transcription errors. Wireless transfer reduces cycle time between measurement and logging, minimises manual input errors and accelerates statistical process control. The digital readout and remote data capture combine to improve throughput while maintaining documented measurement integrity. Robust build and accessories for workshop conditions Constructed for workshop use, the caliper features IP67 protection to resist particulate ingress and temporary immersion, making it suitable for harsher environments. Two measuring cones (Ø20 mm and Ø35 mm) are included for internal and bore‑to‑bore distance checks, expanding the tool’s usability for assemblies and large housings. The robust design supports reproducible positioning over long spans, which is essential when measuring heavy or awkward components where stiffness and handling stability matter. Practical classification and application guidance With a maximum measuring range above two metres, this caliper falls into the class intended for extra‑long measurements and large‑format parts—examples include large flanges, pipe sections and heavy castings. For workshops that need a single instrument capable of internal, external and step measurements across large assemblies, the combination of range, calibration and ruggedness makes this instrument a practical alternative to multiple specialised gauges. Contact Metav Werkzeuge to discuss how this Microtech Metrology digital caliper fits into existing inspection processes or to arrange purchase and delivery from Emmerich. Technical Data Article number: 141732014 GTIN: 4061905452314 Brand: Microtech Metrology Data output: Wireless Digital display: Swiss Digit, 11 mm IP protection: IP67 ISO 17025 calibration: included with certificate Measuring range: 20–2020 mm Accuracy: 0.06 mm Included accessories: measuring cones Ø20 mm and Ø35 mm ECLASS: 21170344 Facts Measuring range min: 20 mm Measuring range max: 2020 mm Display digit height: 11 mm Accuracy value: 0.06 mm GTIN numeric: 4061905452314 Special features Wireless data transfer for direct logging Supplied with ISO 17025 calibration certificate Ruggedised for workshop use Two internal measuring cones included Suitable for large components and assemblies Digital readout optimised for readability FAQ Is the caliper delivered with a calibration certificate? Yes. The Microtech Metrology digital caliper is delivered fully calibrated to ISO 17025 and includes the calibration certificate for traceable documentation. What measuring tasks is this instrument suitable for? This digital caliper covers internal, external and step measurements across a 20–2020 mm span, making it suitable for large housing, flange and pipe inspections where extra‑long range is required. Can measurement data be exported directly to QA software? Yes. The caliper offers wireless data output for direct capture into inspection or SPC systems, reducing manual entry and improving data integrity. What environmental protection does the instrument provide? The device is rated IP67, which protects against dust ingress and temporary immersion—suitable for many workshop environments. Are any accessories supplied for bore measurements? The caliper includes two measuring cones (Ø20 mm and Ø35 mm) to facilitate internal and bore‑to‑bore distance checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
20-220mm Digital Precision Caliper Color 1.5" Touchscreen Wireless USB IP54 - Microtech Metrology
Take advantage of a combination of high-resolution measurement, robust workshop protection and fast digital data transfer to streamline quality checks. The integrated wireless and USB outputs reduce logging time while the sturdy design and colour touchscreen keep routine measurements efficient. Order the device directly via Metav Werkzeuge or request application advice from our consultants. Digital Caliper 20–220 mm — Microtech Metrology, 1.5" Colour Touchscreen, Wireless + USB The Digital Caliper 20–220 mm is a workshop-grade measuring instrument for precise external, internal, depth and step measurements in machine shops and quality control stations. Colour 1.5" touchscreen display Wireless and USB data output Resolution 0.005 mm for fine readings IP54 splash and dust protection Precise readings within the standard workshop range Designed for the common shop lengths that balance reach and rigidity, this caliper sits in the Standard measuring class with a 20–220 mm range — ideal for general engineering and metalwork tasks where 150–200 mm sizes are typically employed. The device delivers a reading step of 0.005 mm, enabling finer discrimination than many conventional digital gauges; this improves decision-making in part acceptance and reduces rework. A compact jaw profile (25 mm length) supports access to smaller features while preserving mechanical stability during routine checks. Fast, secure data capture for traceable documentation Data transfer is handled via Wireless + USB, allowing measurement values to be transmitted directly to inspection software or spreadsheets without manual entry. The 1.5" colour touchscreen offers clear legibility and rapid mode changes, shortening cycle times in incoming inspection and production control. By reducing paperwork and transfer errors, the integrated outputs support more efficient processes and clearer audit trails, which is essential for repeatable production and quality assurance regimes. Built to endure the workshop environment Constructed for regular use, the caliper carries an IP54 rating to resist fine dust and splashes commonly encountered on the shop floor. The instrument’s controls and display are laid out for single‑hand handling and quick orientation in busy workflows. These practical features combine to lower downtime and keep measurement tasks moving — a pragmatic choice for maintenance benches and inspection rooms where robustness and uptime matter most. Practical fit for manufacturing and inspection workflows As a digital measuring tool with simple connectivity and fine resolution, this caliper bridges handheld flexibility with modern data handling expectations. It supports standard measurement tasks — external, internal, depth and step readings — while speeding data collection for process control. The combination of workshop durability, precise resolution and direct data export positions it as an efficient instrument for production-oriented metrology and routine quality control. Contact Metav Werkzeuge for targeted application advice and rapid supply of Microtech Metrology digital calipers — email info@metav-werkzeuge.com or call +49 2822 7131930 for immediate assistance Technical data Article number: 141430207 GTIN: 4061905037924 Brand: Microtech Metrology Data Measuring range: 20–220 mm Resolution (reading): 0.005 mm Display: Colour 1.5" touchscreen Jaw length: 25 mm Protection class: IP54 Special features Digital instrument (electronic display) Data output: Wireless + USB Standard-range caliper classification suitable for workshop use Suitable for external, internal, depth and step measurements FAQ Is this caliper delivered calibrated? The delivery does not include an ISO 17025 certificate by default; the Microtech Metrology digital caliper is supplied in ready-to-use condition and standard factory calibration applies unless a specific calibration option is requested. Which measurement tasks does this instrument cover? This caliper supports external, internal, depth and step measurements, making the Microtech Metrology digital caliper 20–220 mm suitable for a wide range of workshop and inspection tasks. How are measurement values transferred to a PC or inspection system? Values are transmitted via the caliper’s Wireless + USB interfaces, enabling direct logging to software or spreadsheets and eliminating manual transcription. Is the instrument robust enough for the shop floor? Yes. The IP54 rating provides protection against dust ingress and water splashes typically encountered in workshops, supporting reliable daily use. Can the caliper be used for high-precision laboratory tasks? With a resolution of 0.005 mm the caliper offers finer readings than many standard digital gauges; for submicron laboratory requirements, purpose-built high‑precision instruments would be recommended. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
20-3020 mm Digital Precision Caliper For Bore Distances With Ø20/Ø35 Probes, IP67, ISO 17025 Calibrated - Microtech Metrology
Taking advantage of an extra‑long measurement range and IP67 protection, this caliper delivers reproducible results for large components while remaining robust in workshop environments; supplied fully ISO 17025 calibrated with certificate, it is available through Metav Werkzeuge for immediate integration into production or quality control workflows. Digital Caliper by Microtech Metrology — extra‑long range, IP67 protection The Digital Caliper is an extra‑long, workshop‑grade measuring instrument for large components and assemblies, designed to combine extended reach with robust environmental protection and traceable calibration. Extra‑long 3,020 mm measuring range IP67 dust and water protection ISO 17025 calibrated with certificate Swiss Digit display, 11 mm height Reliable reach for large parts and assemblies The instrument is tailored to measurement tasks that exceed standard workshop limits: with an extra‑long measuring capacity of 3,020 mm it addresses large shafts, housings and assemblies that otherwise require multiple setups. The long beam is engineered for a balance of reach and rigidity, reducing deflection over distance and enabling more consistent readings on sizeable components. This makes the caliper suitable for heavy‑duty applications in fabrication, tooling and machine assembly where single‑pass measurements save time and reduce cumulative error. Traceable accuracy and robust readout for production use Accuracy and documentation are prioritised: the device is delivered fully ISO 17025 calibrated and includes the calibration certificate for quality records and audits. The electronic system offers a resolution of 0.01 mm while the stated accuracy is 0.07 mm, parameters that support reliable dimensional control across the instrument's range. The Swiss Digit display with 11 mm character height ensures clear readout at bench or workshop lighting levels, and the IP67 protection rating keeps electronics safe from coolant, chips and dust, extending service life in demanding environments. Practical accessories and workshop integration Practical features reduce setup time and broaden applicability: the caliper comes with measuring cones Ø20 mm and Ø35 mm, enabling precise bore and spacing checks on large parts without improvised fixtures. The instrument’s digital interface and robust housing simplify handling and storage in production contexts, while consistent mechanical design supports repeatable contact geometry. For inspection tasks that require documented traceability and resistance to shop conditions, this unit provides a ready‑to‑use solution that links long‑range capability with workshop durability. Contact Metav Werkzeuge for a specialist consultation on integrating the Microtech Metrology extra‑long digital caliper into measurement routines; our Emmerich team can advise on compatibility with existing jigs and order fulfilment via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141733013 GTIN: 4061905452581 Manufacturer: Microtech Metrology Facts Measuring range: 20–3,020 mm Min measuring range: 20 mm Max measuring range: 3,020 mm Resolution: 0.01 mm Accuracy: 0.07 mm Display height: 11 mm Special features Protection class IP67 ISO 17025 calibration certificate included Swiss Digit display Accessories: measuring cones Ø20 mm and Ø35 mm Digital caliper for extra‑long components FAQ What measurement lengths are covered by this caliper? The caliper covers a measuring span from 20 mm up to 3,020 mm, making it suitable for very large components and assemblies. Is the instrument delivered with calibration documentation? Yes, the unit from Microtech Metrology is supplied fully calibrated to ISO 17025 and includes the calibration certificate for traceability and quality records. How resistant is the caliper to shop environments? With an IP67 rating, the caliper is protected against dust ingress and temporary immersion, offering robust performance in workshops with coolants and debris. What is the display and resolution of the readout? The digital readout uses a Swiss Digit display with 11 mm characters and a resolution of 0.01 mm for clear, precise readings. Which accessories are included for bore and spacing checks? The delivery includes measuring cones Ø20 mm and Ø35 mm, facilitating bore and centre‑distance measurements on larger parts. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
20-520mm Digital Precision Caliper With Wireless Output, Swiss Digit Display 11mm, IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of precise, traceable measurement with ISO 17025 calibration, robust IP67 protection and wireless data transfer for faster documentation and fewer errors — order via Metav Werkzeuge or consult our specialists for tailored integration. Precision Caliper — Digital caliper 20–520 mm, IP67, Microtech Metrology The Precision Caliper is a wireless digital measuring instrument for external, internal and depth measurements across workshop environments and inspection benches, designed for long-range checks up to 520 mm. ISO 17025 calibrated certificate included Measuring range 20–520 mm, large-range caliper IP67 dust- and water-resistant design Wireless data output for streamlined logging Traceable accuracy for quality assurance The caliper delivers an accuracy of ±0.03 mm, making it suitable for standardised quality control and production checks where reproducibility matters. Supplied with ISO 17025 calibration, the instrument arrives with a formal calibration certificate, ensuring measurement results are traceable and accepted in audit procedures. The Swiss Digit display (11 mm height) provides clear readout at the inspection bench, while the 0.01 mm reading step supports fine resolution for routine metrology. Built for tough shop-floor conditions Rated IP67, the instrument resists dust ingress and temporary immersion, which reduces downtime from accidental contamination and enables reliable use in harsher environments. The robust carriage and hardened measuring faces ensure long service life under frequent handling; the large-range design (20–520 mm) provides the reach required for sizeable components without sacrificing stiffness. This balance of durability and reach supports consistent results across daily measurement tasks. Efficient data capture and process integration Equipped with wireless data output, the caliper minimises transcription errors and accelerates data logging into inspection software or spreadsheets. The combination of clear digital readout and wireless transfer reduces paperwork, shortens inspection cycles and supports traceable batch documentation. Supplied measuring cones (Ø20 mm and Ø35 mm) extend functionality for specific bore and hole-distance checks, enabling rapid adaptation between different measurement tasks at the bench. Practical benefits for workshops and QC labs As a large-range digital caliper, the instrument is tailored to sectors that require both reach and repeatability, such as fixture assembly, housing inspection and medium-size component fabrication. The ergonomics of the slider and the readable display simplify frequent use, while the ISO 17025 certificate underpins supplier and customer confidence during acceptance. For shops aiming to modernise data flow, the wireless capability provides an immediate productivity gain, supporting faster decisions and fewer manual transcription faults. For traceable, workshop-ready measurement with ISO 17025 calibration and wireless data transfer, contact Metav Werkzeuge to arrange supply of the Microtech Metrology Precision Caliper and discuss integration into inspection routines. Technical data SKU: 141730514 GTIN: 4061905452598 Brand: Microtech Metrology Facts Measuring range: 20–520 mm Resolution (reading): 0.01 mm Stated accuracy: ±0.03 mm Protection class: IP67 Display: Swiss Digit, 11 mm height Data output: Wireless Calibration: ISO 17025 certificate included Special features Measuring cones Ø20 mm and Ø35 mm included Digital readout for external, internal and depth measurement Large-range caliper suitable for components up to 520 mm Robust construction for workshop and inspection use FAQ Is this caliper delivered with a calibration certificate? Yes. The Microtech Metrology Precision Caliper is supplied fully calibrated with an ISO 17025 calibration certificate, ensuring traceability for inspection and audit purposes. What does IP67 mean for daily use? IP67 indicates protection against dust ingress and temporary immersion, so the caliper tolerates typical shop-floor exposure to coolant mist or accidental splashes without compromising function. Can measurement data be transferred directly to inspection software? The caliper’s wireless data output enables direct transfer of measurement values to compatible systems or data loggers, reducing manual entry and speeding up documentation. Is the measuring range suitable for larger assemblies? With a measuring range of 20–520 mm, this large-range caliper covers many medium to large components and fixtures while maintaining stiffness appropriate for reliable results. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2000 mm Digitaler Messschieber, 0,01mm Auflösung, IP 67, ISO 17025 Kalibrierzertifikat - Microtech Metrology
Präzision und lange Reichweite verbinden sich bei diesem Messschieber mit praktischer Datenschnittstelle und werthaltiger Kalibrierung; profitieren Sie von präziser Messgenauigkeit, robustem IP 67 Schutz und direkter Datenübertragung. Bestellen Sie den Messschieber direkt über Metav Werkzeuge oder fragen Sie unsere Beratung an. Messschieber — Digitaler Messschieber von Microtech Metrology Der Messschieber ist ein digitaler Messschieber mit 2.000 mm Messbereich für Langmessungen in Werkstatt und Fertigung, ausgeliefert mit vollständiger ISO 17025 Kalibrierung. Digitalanzeige Swiss Electric 14 mm hoch Messbereich bis 2000 mm für Langteile Ausgeliefert mit ISO 17025 Kalibrierzeugnis Wireless Datenausgang für Datenerfassung IP 67 Schutz für raue Werkstattumgebung Präzise Langmessungen für große Bauteile und Vorrichtungen Für Bauteile mit größerer Länge bietet der Messschieber mit Messbereich bis 2000 mm die notwendige Reichweite; diese Ausführung fällt in die Kategorie Lang und kombiniert Reichweite mit noch handhabbarer Steifigkeit. Durch den langen Messschenkel und die ausgelegte Formgebung lassen sich Längsmaße an Profilen, Rohren und Aufnahmen sicher und reproduzierbar erfassen, ohne dass die Handhabung unverhältnismäßig komplex wird. So profitieren Anwender von eindeutigen Messergebnissen bei großen Baugruppen. Kalibrierte Messgenauigkeit und klare Anzeige Die Anzeige arbeitet mit einer feinen Ablesung 0,01 mm; die technische Genauigkeit wird durch die angegebene Kennzahl unterstützt. Der Messschieber wird vollständig kalibriert ausgeliefert; ein ISO 17025 Kalibrierzeugnis liegt bei, sodass Messungen sofort in Prüfprozessen verwendet werden können. Dies reduziert Einrichtungsaufwand und steigert die Nachvollziehbarkeit in Qualitätsprozessen, insbesondere bei Prüfungen und Fertigungsfreigaben. Robuste Elektronik, Schutz und Datenausgabe für Industrieeinsatz Die Konstruktion ist für den rauen Werkstattalltag ausgelegt: IP 67 Schutz bewahrt Elektronik und Gleitschiene vor Staub und Strahlwasser, die Swiss Electric Anzeige mit 14 mm Ziffernhöhe sorgt für schnelle Ablesbarkeit. Für digitale Prozesse steht ein Wireless Datenausgang zur Verfügung, der Messwerte direkt in Prüfsoftware oder Datenerfassungssysteme übergeben kann. Das ABS Messsystem gewährleistet zuverlässige Positionserfassung und einfache Nullsetzung. Bedienkomfort, Materialangaben und typische Einsatzbereiche Die lange Schnabellänge 300 mm und der Querschnitt 42x8 schaffen eine stabile Führung über die Messlänge; das erleichtert Innen‑ und Außenmessungen an längeren Werkstücken und Spannmitteln. Entwickler und Fertiger im Vorrichtungsbau, Formenbau sowie in der Metallbearbeitung profitieren von der Kombination aus Reichweite, Handhabung und digitaler Anbindung. Wartung und Bedienung bleiben dank klarer Anzeige und robusten Komponenten überschaubar. Empfehlung: Den digitalen Messschieber von Microtech Metrology mit ISO 17025 Kalibrierung über Metav Werkzeuge beziehen; bei technischen Fragen erreichen Sie uns per eMail info@metav-werkzeuge.com, Telefon +49 2822 7131930 oder WhatsApp +49 170 2837271. Produktmerkmale Artikelnummer: 141073995 Marke: Microtech Metrology Bezeichnung: Messschieber, mit langem Messschnabel GTIN: 4061905454721 Daten Messbereich: 0-2000 mm Ablesung: 0,01 mm Genauigkeit: 0,08 Schnabellänge: 300 mm Querschnitt: 42x8 Besonderheiten IP 67 (Schutz gegen Staub und zeitweiliges Untertauchen) Datenausgang: Wireless Digitalanzeige: Swiss Electric Digit Höhe 14mm Messsystem: ABS ISO 17025 Kalibrierung: Kalibrierzeugnis wird mitgeliefert FAQ Wie groß ist der maximale Messbereich dieses Messschiebers? Der Messschieber von Microtech Metrology bietet einen Messbereich bis 2000 mm und fällt damit in die Kategorie Lang, ideal für längere Werkstücke und Aufnahmen. Wird der Messschieber kalibriert geliefert? Ja, der Messschieber wird vollständig kalibriert ausgeliefert; ein Kalibrierzeugnis nach ISO 17025 liegt dem Produkt bei und dokumentiert die Prüfergebnisse für die Qualitätssicherung. Welche Anzeige- und Auflösungsdaten hat das Gerät? Die Digitalanzeige arbeitet mit einer Ablesung von 0,01 mm; die Swiss Electric Anzeige hat eine Ziffernhöhe von 14 mm für gute Lesbarkeit auch bei Serienprüfungen. Ist der Messschieber für den Einsatz in rauer Umgebung geeignet? Dank IP 67 Schutz ist der Messschieber gegen Staub und zeitweiliges Untertauchen geschützt, wodurch er sich für Werkstattbedingungen und anspruchsvolle Fertigungsbereiche eignet. Wie werden Messdaten übertragen? Der Messschieber verfügt über einen Wireless Datenausgang, der eine direkte Übertragung von Messwerten in Prüfsoftware oder Datenerfassungssysteme ermöglicht und so manuelle Fehler reduziert. Hersteller: Microtech, Nizhneyurkovska str., 45a; 04080 Kyiv; Ukraine; tool@microtech.tools
2000mm Digital Depth Caliper Colour 2.4" Touchscreen, Wireless/USB, IP54, ISO 17025 Calibrated - Microtech Metrology
Benefit from certified measurement traceability, wireless data transfer and robust IP54 protection for reliable depth measurements up to 2,000 mm; these characteristics ensure consistent results and efficient data capture on the shop floor. Order the depth caliper directly via Metav Werkzeuge or consult our specialists for technical advice. Depth Caliper by Microtech Metrology – ISO 17025 calibrated, Wireless + USB The Depth Caliper is a long-range, workshop-grade measuring instrument for depth measurement up to 2,000 mm, combining a colour touchscreen with wireless and USB data transfer for fast, error-reduced documentation. ISO 17025 calibrated for traceable results Colour 2.4" touchscreen display Wireless and USB data output IP54 protection for workshop environments Certified accuracy for dependable decision‑making The instrument is supplied fully calibrated in accordance with ISO 17025, which means a documented traceable baseline and a calibration certificate are included. With a display resolution of 0.01 mm and an operational accuracy of ±0.07 mm, the caliper provides measurable, comparable values that support quality control decisions and process adjustments. The difference between resolution and accuracy is explained in the certificate: resolution refers to the smallest increment shown on the display, while accuracy describes the expected deviation from a true value. Together, these specifications turn measured figures into reliable production data rather than approximate indicators, reducing rework and inspection uncertainty. The addition of handcrafted measuring jaws improves contact quality at the measurement points and supports consistent repeatability. Faster data flow and durable workshop performance Integrated Wireless and USB outputs enable direct export of measurement data into inspection software, spreadsheets or data-collection systems, cutting manual transcription time and the risk of input errors. The 2.4" touchscreen provides clear readout and uncomplicated menu navigation for rapid setting changes on the shop floor. Built to withstand everyday use, the caliper carries an IP54 rating, indicating protection against limited dust ingress and splashing water — a practical advantage where coolant mist or airborne dust is present. These features combine to accelerate inspection routines and integrate the instrument into digital quality workflows without complex retrofitting. Long‑range design for large components and fixtures Designed for measurements up to 2,000 mm, the instrument belongs to the long-range class of depth calipers and is suited to larger assemblies such as housings, fixtures and long shafts. The extended measuring range balances reach with the need for sufficient rigidity so that readings remain reproducible across the span; the crafted measuring jaws and robust slide mechanics help mitigate deflection effects during handling. For production environments that handle sizeable components, this solution reduces the need for multiple shorter devices and simplifies setup. The digital interface and standardised data output make it straightforward to document measurements for traceability and process control, supporting a smooth production flow and quicker decision cycles. Contact Metav Werkzeuge in Emmerich for personalised advice on the Microtech Metrology depth caliper (SKU 1432012007) with ISO 17025 calibration and to arrange delivery; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 1432012007 GTIN: 4061905459719 Manufacturer: Microtech Metrology Facts Measuring range: 0–2000 mm Resolution: 0.01 mm Accuracy: ±0.07 mm Display: Colour 2.4" touchscreen Special features Digital device (colour touchscreen) Wireless + USB data output IP54 protection Handcrafted measuring jaws ISO 17025 calibration and certificate included Category: digital caliper FAQ Is the instrument delivered calibrated? Yes. The Depth Caliper from Microtech Metrology is delivered fully calibrated to ISO 17025 and includes the calibration certificate for traceability. What measuring range does the caliper cover? The device measures depths from 0 to 2000 mm and is classified as a long‑range depth caliper suitable for larger components. How is measurement data exported? Measurement data can be exported via the caliper's Wireless connection or through the USB port; the Microtech Metrology unit supports direct transfer to inspection software. What accuracy and resolution can be expected? The caliper offers a display resolution of 0.01 mm and an operational accuracy of ±0.07 mm, as stated in the technical data and calibration certificate. Is the instrument suitable for workshop use? Yes. The Depth Caliper features IP54 protection and a robust build with handcrafted measuring jaws, making it appropriate for standard workshop environments. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2000mm Digitaler Messschieber, 0,01mm Auflösung, IP 67, Swiss Electric Display 11mm, ISO 17025 kalibriert - Microtech Metrology
Profitieren Sie von der Kombination aus ISO 17025‑Kalibrierung, Schutzart IP 67 und dem langen Messbereich bis 2000 mm für reproduzierbare Messwerte unter Industriebedingungen. Bestellen Sie das Produkt direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Messschieber von Microtech Metrology – Digitaler Messschieber Messschieber von Microtech Metrology zur präzisen Längenmessung in Werkstatt und Produktion, ausgelegt für lange Messstrecken und industrielle Einsatzbedingungen. Digitalanzeige Swiss electric 11 mm für klare Ablesung Schutzart IP 67, staubdicht und kurzzeitige Untertauchung möglich Vollständig kalibriert nach ISO 17025 mit Kalibrierzeugnis Messbereich bis 2000 mm, geeignet für lange Bauteile Querschnitt 42x8 für stabile Führung und geringe Durchbiegung Präzise Messwerte dank kalibrierter Elektronik Der digitale Schieber liefert eine Ablesung von 0,01 mm und eine angegebene Genauigkeit von 0,06 mm, was ihn für viele industrielle Messaufgaben praxistauglich macht. Die integrierte Swiss electric Anzeige mit 11 mm Ziffernhöhe sorgt für schnelle Erfassung der Messwerte auf der Werkbank. Da das Gerät vollständig ISO 17025‑kalibriert ausgeliefert wird, liegt ein Kalibrierzeugnis bei, das die Rückführbarkeit der Messwerte sichert und Audit‑Anforderungen unterstützt. Diese Kombination aus Messauflösung und Kalibrierzertifikat reduziert Reklamationsrisiken und beschleunigt Prüfprozesse. Robustheit und Eignung für raue Umgebungen Mit der Schutzart IP 67 ist das Messgerät gegen Staub geschützt und für kurzzeitiges Untertauchen geeignet, sodass Reinigungsprozesse oder feuchte Umgebungen die Funktion nicht beeinträchtigen. Der robuste Querschnitt von 42x8 und die lange Schnabellänge von 150 mm ermöglichen stabile Messungen an längeren Werkstücken. Dadurch bleiben Messungen über die gesamte Länge reproduzierbar, was insbesondere bei Bauteilen mit größerer Spannweite Zeit und Aufwand in der Qualitätskontrolle spart. Einsatzbereich und Anwendernutzen Dieser Schieber ist für Anwender entwickelt, die Reichweite und Wiederholgenauigkeit benötigen: Werkzeug‑ und Formenbauer, Vorrichtungsbau sowie die Produktion großformatiger Komponenten profitieren vom 0–2000 mm Messbereich. Durch die digitale Anzeige und die robuste Ausführung lassen sich Messungen zügig durchführen und Dokumentationsschritte vorbereiten. Anwender erhalten so eine praxistaugliche Lösung, die Messabläufe verkürzt und Fehlerquellen durch unsichere Handhabung minimiert. Bedienkomfort, Schnittstellen und Messsystem Das Messsystem arbeitet mit ABS für zuverlässige Positionsspeicherung beim Ausschalten, was den Arbeitsfluss erleichtert. Die gut ablesbare Anzeige reduziert Fehlablesungen, und die ergonomische Führung unterstützt einhändige Bedienung bei längeren Messserien. Für Prüfaufgaben, die wiederkehrende Messdaten verlangen, liefert die Kombination aus Auflösung, Stabilität und Kalibrierung eine sichere Basis für standardisierte Prüfprotokolle. Für eine ISO‑konforme Ausstattung und persönliche Beratung kontaktieren Sie Metav Werkzeuge per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 – wir unterstützen bei Auswahl, Kalibrierung und schneller Lieferung. Produktmerkmale Artikelnummer: 141073912 Marke: Microtech Metrology Bezeichnung: Messschieber GTIN: 4061905454462 Messsystem: ABS Daten Messbereich: 0–2000 mm Ablesung: 0,01 mm Genauigkeit: 0,06 mm Schnabellänge: 150 mm Querschnitt: 42x8 Besonderheiten IP 67: Staubdicht, kurzzeitiges Untertauchen möglich ISO 17025: Vollständig kalibriert; Kalibrierzeugnis wird mitgeliefert Digitalanzeige: Swiss electric Digit, Ziffernhöhe 11 mm Eignung: Langer Messbereich für großformatige Bauteile FAQ Wie genau ist der digitale Schieber in der Praxis? Der Microtech Metrology Messschieber bietet eine Ablesung von 0,01 mm und eine angegebene Genauigkeit von 0,06 mm, was für viele Qualitätskontrollen in Produktion und Werkstatt ausreichend ist. Wird der Messschieber mit Kalibrierzeugnis geliefert? Ja, der digitale Schieber wird vollständig ISO 17025‑kalibriert ausgeliefert; das zugehörige Kalibrierzeugnis liegt dem Gerät bei. Ist das Gerät für feuchte Arbeitsumgebungen geeignet? Die Schutzart IP 67 schützt das Gerät vor Staub und ermöglicht kurzzeitiges Untertauchen, sodass Reinigung und feuchte Umgebungen die Messfähigkeit nicht beeinträchtigen. Für welche Messlängen ist das Gerät besonders geeignet? Mit einem Messbereich bis 2000 mm eignet sich das Gerät für lange Bauteile und Komponenten im Vorrichtungs‑ und Formenbau sowie im Rohr‑ und Behälterbau. Welche Anzeige kommt zum Einsatz und wie gut ist die Ablesbarkeit? Die Anzeige ist eine Swiss electric Digitalanzeige mit 11 mm Ziffernhöhe, die eine klare und schnelle Ablesung selbst bei längeren Messserien ermöglicht. Hersteller: Microtech, Nizhneyurkovska str., 45a; 04080 Kyiv; Ukraine; tool@microtech.tools
2000mm Digitaler Messschieber, 0,01mm Auflösung, IP 67, Wireless, Swiss Electric Display, ISO 17025 Kalibrierzeugnis inklusive - Microtech Metrology
Kombinieren Sie die ISO 17025‑Kalibrierung mit einer feinen Auflösung 0,01 mm und dem großzügigen Messbereich 0–2000 mm für verlässliche Serienmessungen; die Lieferung erfolgt komplett kalibriert, mit Kalibrierzeugnis, direkt über Metav Werkzeuge oder auf Anfrage über die technische Beratung. Microtech Messschieber Digital (Langbereich 0–2000 mm) Der Microtech Messschieber Digital ist ein robustes, langreichweitiges Messgerät für präzise Werkstatt‑ und FertigungsÂmessungen mit digitaler Anzeige. Langbereich bis 2.000 mm Auflösung 0,01 mm für detaillierte Messungen ISO‑17025 Kalibrierung mit Kalibrierzeugnis Wireless Datenübertragung für digitale Prozesse Robustes Profil 42x8 mm mit IP 67 Schutz Präzision, die Produktionssicherheit erhöht Durch die Kombination aus Auflösung 0,01 mm und einer gemessenen Genauigkeit 0,06 mm bietet der Schieber verlässliche Ergebnisse für Prüfprozesse und Fertigungsprüfungen. Die ISO 17025‑Kalibrierung sorgt dafür, dass Messergebnisse nachvollziehbar und prüfbar sind; ein Kalibrierzeugnis wird mitgeliefert, sodass Prüfreihe und Dokumentation sofort nutzbar sind. Nutzer profitieren von standardisierter Messsicherheit, die Audit‑ und Qualitätsanforderungen direkt unterstützt. Langer Messbereich trifft auf verwindungsarme Konstruktion Als Vertreter der Lang‑Klasse mit einem Messbereich 0–2000 mm verbindet dieses Messgerät Reichweite und Steifigkeit für großformatige Bauteile. Die Schnabellänge 150 mm und das Querschnitt 42x8 mm des Trägers erhöhen die Biegesteifigkeit, was Messunsicherheit über längere Strecken reduziert. Für Messungen an Rahmen, Aufnahmen oder Gehäusen ist die Kombination aus Reichweite und stabiler Mechanik ein klarer Vorteil bei wiederholbaren Ergebnissen. Digitaler Workflow und nahtlose Datenerfassung Die Swiss electric Anzeige mit 14 mm Ziffernhöhe gewährleistet gute Ablesbarkeit, während das ABS Messsystem Positionsdaten zuverlässig verwaltet. Der integrierte Wireless‑Datenausgang ermöglicht die direkte Ãœbertragung von Messwerten in Prüfsoftware oder Datenerfassungssysteme und reduziert Tippfehler sowie Nacharbeit. In Fertigungsabläufen sorgt diese digitale Anbindung für kürzere Zykluszeiten und bessere Nachverfolgbarkeit. Robustheit und Einsatzbereiche mit Praxisnähe Der Schieber ist gegen Eindringen geschützt (IP 67) und eignet sich daher auch für anspruchsvolle Werkstattumgebungen oder den Einsatz in leicht feuchten Produktionsbereichen. Durch die lange Messlänge empfiehlt sich der Einsatz in Montage‑, Vorrichtungs‑ und Formenbau‑Prozessen, wo große Bauteile präzise zu prüfen sind; bei Bedarf erleichtert zweipersoniges Handling die Arbeit mit langen Schiebern. Die robuste Ausführung macht das Gerät zu einer langlebigen Investition für anspruchsvolle Anwender. Empfehlung: Für präzise Langmessungen das Microtech Messschieber Digital mit ISO‑17025‑Kalibrierung über Metav Werkzeuge beziehen — bei Fragen eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930; WhatsApp +49 170 2837271 Produktmerkmale Artikelnummer: 141073992 Marke: Microtech Metrology Bezeichnung: Messschieber ECLASS: 21170344 GTIN: 4061905454714 Fakten Messbereich: 0–2000 mm Messbereich maximal: 2000 mm Ablesung: 0,01 mm Genauigkeit: 0,06 mm Schnabellänge: 150 mm Querschnitt: 42x8 Besonderheiten IP 67: Staub‑ und Strahlwasserschutz Messsystem: ABS (Positionsspeicherung) Datenausgang: Wireless (Datenübertragung) Digitale Anzeige: Swiss electric Anzeige, Ziffernhöhe 14 mm ISO 17025: Kalibrierung mit Kalibrierzeugnis Digital: Elektronische Messwertanzeige FAQ Wie genau ist die Messung mit dem Microtech Messschieber Digital? Die Messung erreicht eine Auflösung von 0,01 mm bei einer angegebenen Genauigkeit von 0,06 mm; die gelieferten Werte entsprechen den Messbedingungen des Geräts und werden durch die ISO 17025‑Kalibrierung belegt. Wird der Messschieber kalibriert geliefert? Ja, der Microtech Messschieber Digital wird vollständig kalibriert ausgeliefert; die Kalibrierung erfolgte nach ISO 17025 und das entsprechende Kalibrierzeugnis wird mitgeliefert. Welche Schnittstellen stehen zur Verfügung, um Messdaten zu übertragen? Das Gerät bietet einen Wireless‑Datenausgang zur direkten Ãœbertragung der Messwerte in Prüfsoftware und Datenerfassungssysteme, was manuelle Ãœbertragungsschritte überflüssig macht. Für welche Anwendungen ist der Messschieber besonders geeignet? Durch den Messbereich 0–2000 mm und das verwindungsarme Profil eignet sich das Gerät für Montage‑, Vorrichtungs‑ und Formenbau sowie für Prüfvorrichtungen an größeren Bauteilen. Wie widerstandsfähig ist der Messschieber gegenüber Umgebungsbedingungen? Der Schieber ist mit IP 67 klassifiziert und bietet Schutz gegen Staub und zeitweiliges Untertauchen, sodass er in anspruchsvollen Werkstattumgebungen zuverlässig einsetzbar ist. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
2000mm Messschieber Digital, 0,01mm Auflösung, IP 67, ISO 17025 Kalibriert - Microtech Metrology
Zuverlässige Messungen mit großer Reichweite und Laborqualität durch ISO‑kalibrierung, IP67‑Schutz und eine fein auflösende Digitale Anzeige. Bestellen Sie den Messschieber direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Messschieber Digitaler Messschieber von Microtech Metrology Messschieber ist ein digitaler Messschieber für präzise Längenmessungen im Langbereich und eignet sich für Werkstatt, Formenbau und Fertigungskontrolle ISO‑Kalibrierung mit Kalibrierzeugnis IP67 Schutz gegen Staub und zeitweiliges Untertauchen Digitale Anzeige Swiss electric Höhe 11mm Lange Messschnabel: 300 mm für tiefe Innenmessungen Messbereich bis 2000 mm für großformatige Komponenten Präzision und Messbereich für reproduzierbare Ergebnisse Die Konstruktion dieses digitalen Messgeräts wurde auf Langmessungen bis 2 000 mm ausgelegt und verbindet Reichweite mit Handhabung. Durch das ABS‑Messsystem bleibt die Anzeige bei Positionswechsel zuverlässig stabil, während die Anzeigeauflösung von 0,01 mm eine feine Ablesung ermöglicht. Anwender profitieren von einer messbaren Verbesserung der Prozesssicherheit bei Aufmaßen an Gehäusen, Spannmitteln oder großen Formteilen. Robustheit und lange Einsatzdauer dank Schutzklasse Das Gerät bietet IP67‑Schutz, was Staubdichtigkeit und Schutz gegen zeitweiliges Untertauchen bedeutet und damit Einsatz in anspruchsvollen Umgebungen erlaubt. Die robuste Balkenquerschnittsgeometrie trägt zur Steifigkeit bei, die lange Messschnäbel mit 300 mm erlauben sichere Innenmessungen an tiefen Bohrungen oder Nuten. Diese Merkmale reduzieren Ausfallzeiten durch Beschädigung und erhöhen die Zuverlässigkeit im Werkstattalltag. Kalibrierung, Dokumentation und Nachvollziehbarkeit Der Messschieber wird mit vollständiger ISO 17025‑Kalibrierung ausgeliefert; ein Kalibrierzeugnis liegt bei und sichert die Rückführbarkeit der Messergebnisse. Diese Dokumentation erleichtert Prüfprotokolle, Lieferantenaudits und interne Qualitätsprozesse und bietet Planungs- und Nachweisvorteile für Fertigungsbetriebe und Labore. Geeignet für Handwerk, Maschinenbau und Qualitätssicherung Durch den großen Messbereich und die robuste Ausführung richtet sich dieses Messmittel an Anwender, die großformatige Bauteile prüfen müssen, ohne auf Genauigkeit zu verzichten. Typische Einsatzfelder sind Vorrichtungsbau, Formenbau, Rohr‑ und Behälterfertigung sowie die Wareneingangsprüfung in metallverarbeitenden Betrieben. Die Kombination aus Reichweite, Schutzklasse und Kalibrierung macht das Gerät zur praktikablen Werkstattlösung mit Laborstandard. Mit Microtech Präzision: Den ISO‑kalibrierten, IP67‑geschützten Messschieber mit 2‑m Reichweite über Metav Werkzeuge anfordern — Fragen per eMail an info@metav-werkzeuge.com Produktmerkmale Artikelnummer: 141073915 Marke: Microtech Metrology Bezeichnung: Messschieber Messsystem: ABS Daten Messbereich maximal: 2000 mm Ablesung: 0,01 mm Genauigkeit: 0,08 mm Schnabellänge: 300 mm Querschnitt: 42x8 Besonderheiten IP67 Schutz (staubdicht, zeitweiliges Untertauchen) Digitale Anzeige: Swiss electric Höhe 11mm ISO 17025 Kalibrierung inklusive Kalibrierzeugnis Digitale Ausführung (Digitale Anzeige) FAQ Wie genau ist die Messung mit diesem Messschieber? Der Microtech Metrology Messschieber bietet eine Ablesung von 0,01 mm; die in den Produktdaten angegebene Genauigkeit beträgt 0,08 mm und macht das Gerät für viele Fertigungsprüfungen und Werkstattaufgaben geeignet. Wird der Messschieber kalibriert geliefert? Ja, der Messschieber von Microtech Metrology wird vollständig kalibriert nach ISO 17025 ausgeliefert; ein entsprechendes Kalibrierzeugnis ist im Lieferumfang enthalten. Eignet sich das Gerät für den Einsatz im Außenbereich oder nasser Umgebung? Dank IP67 Schutzklasse ist der digitale Messschieber gegen Staub geschützt und für zeitweiliges Untertauchen geeignet, somit ist der Einsatz in feuchten Werkstattbereichen möglich. Welche Messaufgaben unterstützen die langen Messschnäbel? Die 300 mm langen Messschnäbel ermöglichen sichere Innenmessungen in tiefen Bohrungen und Nuten sowie das Erfassen schwer zugänglicher Stellen an großen Bauteilen. Ist die Anzeige gut ablesbar bei hellem Umgebungslicht? Die Digitale Anzeige Swiss electric mit 11 mm Ziffernhöhe sorgt für gute Ablesbarkeit auch bei standardmäßigen Werkstattbeleuchtungen und vereinfacht die schnelle Datenerfassung. Hersteller: Microtech, Nizhneyurkovska Str. 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
200mm Depth Caliper Digital Touchscreen, Wireless USB, IP54, ISO 17025 Calibration - Microtech Metrology
Take advantage of a precision instrument that combines ISO 17025 traceable calibration, robust IP54 protection and flexible Wireless + USB data export; the combination ensures reliable workshop throughput and documented measurement results. Order the calibrated depth caliper directly via Metav Werkzeuge or consult the Metav specialists for application advice. Depth Caliper — digital depth gauge with colour touchscreen and wireless + USB transfer (Microtech Metrology) The Depth Caliper is a digital depth gauge designed for standard workshop and laboratory use, pairing a colour 1.54" touch display with wireless and USB connectivity for fast, documented depth measurements. Colour 1.54" touchscreen display Wireless and USB data output Calibrated to ISO 17025 with certificate IP54 protection against dust and splashes Precision and traceability for routine quality control This depth measuring instrument delivers 0.02 mm accuracy with a fine 0.005 mm reading step, making it suitable for industrial quality tasks while remaining easy to handle. Calibrated and supplied with an ISO 17025 certificate, the device supports traceable measurements and audit requirements; calibration documentation is included with the tool to simplify quality records. The solid technical basis reduces rework and supports faster inspection cycles in production environments. Robust design for the workshop environment Designed for everyday use, the instrument features IP54 protection and hand‑finished measuring jaws, combining environmental resilience with true contact geometry. The guarded slider and sturdy frame maintain measurement stability across repeated cycles, while the surface treatment helps resist contaminants in busy shops. This balance of durability and precision maintains consistent measurement results across shifts and operators. Faster data flow, fewer transcription errors Equipped with Wireless + USB data output and a colour touchscreen, the gauge enables direct transfer of readings to inspection software or a PC, reducing manual entry and associated errors. The intuitive display accelerates routine checks and the wireless option supports semi‑automated data capture on the shop floor. For traceability and statistical process control, this direct data path streamlines documentation and shortens measurement-to-decision time. Range classification and typical applications With a measuring range of 0–200 mm, the instrument falls into the standard category for machine and metalworking tasks — a common choice for 150/200/300 mm shop bases. It is intended for depth measurements on components, fixtures and housings where a blend of reach and stiffness is required. The calibrated unit is well suited for workshop quality control, component inspection and maintenance tasks that demand documented, repeatable depth readings. For traceable, workshop‑ready depth measurement choose the Microtech Metrology depth caliper calibrated to ISO 17025 — contact Metav Werkzeuge in Emmerich for purchasing and application guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: 1432010207 GTIN: 4061905039065 Brand: Microtech Metrology Calibrated: ISO 17025 certificate included Facts Measuring range: 0–200 mm Reading step: 0.005 mm Accuracy: ±0.02 mm Display: Colour 1.54" touchscreen Special features Data output: Wireless + USB Protection class: IP54 Hand‑finished measuring jaws Digital depth gauge / calibrated instrument eClass: 21170344 FAQ Is the gauge delivered calibrated? Yes. The depth caliper from Microtech Metrology is delivered fully calibrated with an ISO 17025 calibration certificate included. What is the usable measuring range and typical application? The instrument covers 0–200 mm and is classified as a standard caliper range, suitable for machine‑shop depth measurements, fixture checks and component inspection. How are measurements exported to a PC or inspection system? Readings can be exported via the built‑in Wireless interface or the USB connection for direct capture into inspection software or spreadsheets. What protection does the housing provide in a workshop? The unit is rated IP54, offering reliable resistance against dust ingress and water splashes commonly encountered in production environments. Are the measuring jaws suitable for repeated workshop use? Yes. The caliper features hand‑finished measuring jaws designed to retain geometry and ensure consistent contact across repeated measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200mm Depth Caliper E‑Ink Display, 0.02mm Accuracy, IP54, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of certified accuracy, robust protection and low‑power readability for reliable depth measurements in production and quality control. Order the depth caliper directly via Metav Werkzeuge or ask the consultants for application advice. Depth Caliper — E‑Ink Display, ISO 17025 Calibrated (Microtech Metrology) The Depth Caliper is a digital depth gauge designed for standard workshop and machine‑tool measurements with a measuring range up to 200 mm, combining rugged protection and laboratory‑grade traceability. E‑Ink display for clear, long battery life ISO 17025 calibration with certificate included IP54 splash and dust protection Hand‑finished measuring jaws for stable contact Certified traceability for production quality The instrument is supplied fully calibrated to ISO 17025 standards and includes a calibration certificate, which supports traceability in documented quality processes. With a stated accuracy of 0.02 mm and a fine 0.005 mm reading, the device meets the demands of standard workshop inspection and routine quality assurance. The calibration by a recognised laboratory reduces uncertainty and simplifies acceptance into inspection routines, making the tool suitable for documented incoming inspection, process checks and traceable measurement records. Clear legibility and robust operation on the shop floor An E‑Ink display provides high contrast and excellent readability under workshop lighting while consuming very little power, so the display remains readable even after long intervals in storage. The housing meets IP54 protection, providing reliable resistance against dust ingress and splashes that commonly occur in production environments. Hand‑finished measuring jaws ensure consistent contact geometry, which reduces measurement scatter when assessing recessed features or deep bores. Practical range and handling for everyday tasks Classified in the Standard category for calipers, the 0–200 mm measuring span balances reach and stiffness for typical machine‑shop and metalwork applications. The depth‑oriented measuring design is optimised for flat surfaces and stepped features; the slim slider and compact beam profile maintain handling comfort and minimise deflection during measurement. The combination of the 200 mm range and the instrument’s mechanical refinement supports repeatable results across a broad set of workshop tasks. Integration into inspection routines and documentation The digital output and established calibration protocol facilitate incorporation into quality workflows and documentation. The included calibration certificate documents conformity to measurement standards, which is beneficial for internal audits and supplier qualification. The robust construction and precise sliding elements reduce rework and sampling frequency by improving first‑pass measurement reliability, thereby supporting efficient production monitoring and quality control. Contact Metav Werkzeuge for technical comparison, calibration options or to request the ISO 17025 certificate for this depth caliper; ordering and specialist advice are available from Metav Werkzeuge. Technical data Article number: 1432010208 GTIN: 4061905455797 Manufacturer: Microtech Metrology E‑class: 21170344 Facts Measuring range: 0–200 mm Resolution / reading: 0.005 mm Accuracy: 0.02 mm Protection rating: IP54 Special features Digital caliper with E‑Ink display Hand‑finished measuring jaws Supplied with ISO 17025 calibration certificate Depth measuring function Category: Digital calipers FAQ What measurement accuracy can be expected from this caliper? The depth caliper from Microtech Metrology is specified with an accuracy of 0.02 mm and a reading resolution of 0.005 mm, suitable for standard workshop and quality‑control tasks. Is a calibration certificate supplied with the instrument? Yes — the delivery includes an ISO 17025 calibration certificate documenting traceability and conformity to recognised laboratory standards. How does the E‑Ink display benefit everyday use? The E‑Ink display offers clear contrast and very low power consumption, improving legibility on the shop floor and extending battery life for the Microtech Metrology depth gauge. Can this instrument be used in damp or dusty environments? The depth gauge is rated IP54, providing protection against dust intrusion and splashes, making it well suited for typical workshop conditions. Which product identifiers are relevant for ordering or inventory? Refer to SKU 1432010208 and GTIN 4061905455797 for ordering and inventory management of the Microtech Metrology depth caliper. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200mm Digital Caliper 80mm Long Jaw, 0.01mm Resolution, Data Output RB5, Plastic Case - Metav IndustryLine
Take advantage of a dependable combination of precise 0.01 mm resolution, sturdy stainless hardened construction and extended 80 mm jaws for reliable measurements across the workshop. Order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. Digital caliper 200 mm (extra-long 80 mm jaws) — Metav IndustryLine Digital caliper 200 mm (extra-long 80 mm jaws) is a robust stainless-steel measuring instrument designed for general machine‑shop and quality‑control tasks, offering fine resolution and versatile measurement modes for everyday use High-resolution 0.01 mm digital readout Extra-long 80 mm measuring jaws Stainless hardened steel construction Four-function measurement capability Reliable precision for daily workshop use The Digital caliper 200 mm (extra-long 80 mm jaws) is built to provide consistent precision for standard workshop tasks. With a resolution of 0.01 mm (and 0.0005 in on the inch scale), readings are detailed enough for machining and inspection where small deviations matter. The 0–200 mm measuring span places this instrument in the standard class, the common choice in metalworking for the best balance between reach and rigidity; it is therefore well suited to general machine‑shop measurement tasks and routine quality checks that demand reproducible results. Robust design that endures workshop environments Construction from stainless hardened steel and a protective metal housing ensures durability against knocks, coolant splash and daily handling. The 80 mm jaws extend reach into deeper or recessed features without compromising stability, while the instrument’s compact mass (approx. 0.66 kg) keeps it easy to manoeuvre for one‑handed work. These design choices reduce flex and operator error, contributing to repeatable readings over many production cycles and minimising downtime for tool replacement. Versatile measurement modes for varied applications The instrument supports four-function measurement for outside, inside, depth and step measurements, simplifying the inspection of complex workpieces without tool changes. The digital display includes ON/OFF, ZERO, UNIT and HOLD functions so that values can be stabilised, zeroed at any position and switched between millimetres and inches quickly. Inch mode reads to 0.0005 in, facilitating cross‑checking of imperial specifications without manual conversion and helping to speed up inspection routines. Data handling and practical operation to aid workflow A dedicated RB 5 data output enables straightforward transfer of measurement data to SPC or data‑collection devices for traceable documentation and process control. The caliper is powered by a 3 V supply and the user interface is optimised for rapid readings and minimal button presses (ON/OFF, ZERO, UNIT, HOLD). These features support efficient, auditable workflows and make the tool a practical asset on the shop floor where timely data capture and process transparency are required. For workshop‑ready precision from Metav IndustryLine, contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: M240.012.N GTIN: 4054469160276 Category: Calipers Numbers / Core technical data Measuring range: 0–200 mm Resolution: 0.01 mm / 0.0005 in Weight: 0.66 kg Jaw length: 80/28 mm Power supply: 3 V Materials & special features Stainless hardened steel Metal housing Digital display with ON/OFF, ZERO, UNIT, HOLD Four‑function measurement: outside, inside, depth, step Data output: RB 5 Works standard FAQ What measuring range does the caliper cover? The caliper covers a measuring range of 0–200 mm; the Metav IndustryLine device (SKU M240.012.N) is therefore classified in the standard range for machine‑shop use. How fine is the displayed measurement? Display resolution is 0.01 mm (0.0005 in), providing the fine granularity needed for routine precision checks and general workshop inspection. Which measurement types can be performed with this instrument? The instrument supports outside, inside, depth and step measurements via its four‑function measurement capability, eliminating the need for multiple tools for common measurement tasks. Is the caliper suitable for harsh workshop conditions? Yes. Construction in stainless hardened steel with a metal housing gives the caliper robustness for frequent use in typical workshop environments. How can measurement data be exported for documentation? The caliper offers an RB 5 data output for connection to data‑loggers or SPC systems, enabling direct transfer of readings for traceability and process control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Caliper for Pipe Wall Thickness Measurement Digital Readout 0.01mm, IP54, ISO 17025 Calibrated - Microtech Metrology
Take advantage of high measurement fidelity, convenient data capture and robust shop‑floor protection to keep quality checks efficient and traceable; order directly via Metav Werkzeuge or consult the Metav team for tailored integration and calibration documentation. Digital Caliper — Microtech Metrology, 0–200 mm, USB, IP54 Digital Caliper for standard workshop and quality‑control applications, offering calibrated traceability and easy data export. Digital display 13 mm for clear readings USB data output for easy data transfer IP54 dust and splash protection ISO 17025 calibrated with certificate included High accuracy and documented traceability for reliable decisions The digital caliper combines a 0–200 mm measuring range with a display resolution of 0.01 mm and an accuracy of ±0.03 mm, providing a reliable basis for dimensional checks in production and inspection. The delivery includes full calibration performed to ISO 17025 standards and an accompanying calibration certificate, ensuring traceability for audits and conformity assessments. This documented accuracy reduces uncertainty in pass/fail decisions and supports consistent quality control without repeated rework. Seamless data handling and durable operation on the shop floor Equipped with USB data output and a bold 13 mm display, the instrument streamlines data capture and reduces transcription errors during batch inspections. The IP54 rating protects the electronics from dust and water splashes commonly encountered at workstations, while the measuring cone Ø 4 mm and jaw length 50 mm provide practical contact geometry for a variety of components. Together these features speed up inspection cycles and simplify integration with data‑logging workflows. Practical range and handling for everyday workshop use Classified as Standard class (measuring range up to 300 mm), the caliper strikes a balance between reach and stiffness that suits most machine‑shop tasks; the 0–200 mm span covers the universal workshop sizes while remaining easy to manoeuvre single‑handed. The construction supports repeatable measurements and straightforward operation, making this instrument a dependable choice for routine checks, incoming inspections and assembly verification without excessive bulk. Contact Metav Werkzeuge for expert advice, calibration documentation and procurement assistance for this Microtech Metrology digital caliper (SKU 141230200) via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 141230200 GTIN: 4061905457838 ECLASS: 21170344 Facts Measuring range: 0–200 mm Resolution (display): 0.01 mm Accuracy: ±0.03 mm Display height: 13 mm Measuring cone Ø: 4 mm Jaw length: 50 mm Protection class: IP54 Special features Digital display USB data output ISO 17025 calibration with certificate Standard class measuring range (0–200 mm) FAQ Is the instrument delivered with a calibration certificate? The Microtech Metrology digital caliper (SKU 141230200) is supplied fully calibrated to ISO 17025 and includes the calibration certificate with delivery. What accuracy and resolution can be expected? Resolution is 0.01 mm and declared accuracy is ±0.03 mm for the Microtech Metrology digital caliper, suitable for standard workshop and quality checks. Can measurement data be exported to a PC or data logger? Yes, the caliper features a USB data output to enable straightforward transfer of measurements to PCs or data‑collection systems. Is the device suitable for use in a busy production environment? With an IP54 rating and a clear 13 mm display, the instrument is designed for robust shop‑floor use and quick read‑outs during repetitive inspections. What makes this caliper a good fit for general workshop use? Its 0–200 mm range, compact handling and ISO 17025 traceability make the Microtech Metrology digital caliper a reliable, easy‑to‑integrate tool for routine dimensional control. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200mm Digital Caliper Sharp Probe Tips, 0.01mm Resolution, Data Hold & Unit, Four‑Function Measurement, Stainless Steel, Supplied in Case - Metav IndustryLine
Take advantage of the combination of precise pointed jaws, a clear digital display and robust stainless hardened construction for reliable workshop measurement; order the caliper directly via Metav Werkzeuge or ask our consultants for application advice. Digital caliper 200 mm M240.018.N — pointed jaws, stainless hardened (Metav IndustryLine) The Digital caliper 200 mm provides exact measurements for confined and detailed components, combining a compact jaw geometry with a sturdy metal body for everyday workshop and inspection work. Precise digital display with ON/OFF ZERO UNIT HOLD Pointed jaws for narrow and internal measurements Hardened stainless steel with metal housing Four measurement modes: inside, outside, depth, step Narrow features, clear gains for fine work The pointed jaws are designed for access to tight bores, grooves and narrow features where standard jaws struggle; this geometry reduces contact uncertainty and simplifies alignment on small parts. Classified as a Standard caliper (measurement range 0–200 mm), the instrument balances reach and stiffness, making it well suited for general engineering and metalwork. The gauge supports the four common measurement methods—inside, outside, depth and step—so a single tool covers multiple tasks and reduces tool changes. Intuitive digital handling to speed up inspection A concise digital display with dedicated ON/OFF, ZERO, UNIT and HOLD functions allows fast readings and straightforward unit switching without guesswork. The metal housing protects the electronics while the hardened stainless steel construction withstands daily workshop use and maintains measurement geometry under mechanical stress. At about 0.45 kg, the instrument is lightweight enough for single‑hand operation yet solid enough to resist unintended flexing during normal handling. Workshop-ready design and trusted factory standard The instrument is supplied to factory standard (Werksnorm) and is designed for routine quality checks, fixture setup and precision component inspection. The pointed jaw length specification 50/24 mm gives a practical reference for micro‑features, and the metal housing enhances durability in harsher environments. Built for repeatable results in production and maintenance contexts, this caliper offers a pragmatic combination of accessibility, robustness and clear digital readout to support efficient measuring processes. Choose the Metav IndustryLine digital caliper for reliable narrow‑feature measurement and contact Metav Werkzeuge in Emmerich for technical details at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: M240.018.N Label: Digital-Messschieber 200 mm, spitzer Schnabel, 3 V INOX, Werksnorm GTIN: 4054469160313 Eclass: 21170344 Data output: RB 5 Facts Measurement range: 0–200 mm Weight: 0.45 kg Jaw length (long/short): 50/24 mm Tariff number: 90173000 Special features Material: stainless steel, hardened, metal housing Pointed jaws for narrow/internal measurements Digital display with ON/OFF, ZERO, UNIT and HOLD buttons Four measurement modes: inside, outside, depth, step Delivered to factory standard (Werksnorm) FAQ Which measurement methods are supported? The caliper supports four measurement modes—inside, outside, depth and step—so both external dimensions and internal or stepped features can be measured with one instrument. Is this caliper suitable for confined bores and narrow parts? Yes, the pointed jaws and the specified jaw geometry (50/24 mm) make the caliper especially suitable for narrow bores, grooves and fine components that require precise contact points. What is the construction and durability of the instrument? Constructed from hardened stainless steel with a protective metal housing, the gauge is designed for routine workshop use and offers robustness against mechanical wear. How is measurement data output provided? This model includes a data output option listed as RB 5, enabling integration with compatible data collection systems or readout devices. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Caliper Sliding Jaw Stainless Steel Metal Body 0.01mm Resolution Plastic Case - Metav IndustryLine
Take advantage of precise 0.01 mm readout, hardened stainless steel construction and a compact sliding jaw for reliable workshop measurement; order directly via Metav Werkzeuge or contact our consultants for application advice. Digital Caliper M240.082.N — 200 mm digital caliper, hardened stainless steel (Metav IndustryLine) The Digital Caliper M240.082.N is a 200 mm digital measuring instrument for workshop and production use, featuring an adjustable sliding jaw and robust metal housing for routine dimensional control Hardened stainless steel construction 0.01 mm resolution and 0.0005 in display Sliding jaw with 120/50 mm jaw length Delivered in protective transport case Precision where it matters The caliper delivers a 0.01 mm resolution on a clear digital readout, making it suitable for standard workshop quality control and machine‑shop tasks. With a measuring span of 0–200 mm the tool sits in the standard measuring range category, which balances reach and rigidity for most fixtures, housings and machined components. The factory standard specification ensures consistent performance across repeated measurements, reducing rework and improving throughput by providing reliable, comparable data every time. Built to withstand daily workshop use Constructed from hardened stainless steel with a metal housing, the instrument resists wear and maintains jaw alignment under regular handling. The adjustable sliding jaw (120/50 mm) adds flexibility for different parts while the overall design keeps the instrument easy to manoeuvre during one‑handed checks. The moderate weight (0.58 kg) reflects a robust build without compromising handling; this balance reduces measurement uncertainty caused by flexing or slip and supports stable, repeatable results on the shop floor. Practical digital functions for faster inspection The large digital display includes ON/OFF, ZERO, UNIT and HOLD keys for quick conversions and temporary value retention, simplifying common inspection routines. A data output port (RB 5) allows integration with data loggers or inspection software for traceable records and batch documentation, speeding up reporting and reducing transcription errors. Supplied in a protective transport case, the instrument is ready for safe storage and mobile use across workstations, preserving calibration and preventing accidental damage. Contact Metav Werkzeuge for a tailored consultation on Metav IndustryLine measuring equipment, request a technical datasheet or obtain a quotation by phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical Data Article number: M240.082.N GTIN: 4061905038372 Brand: Metav IndustryLine Measuring range: 0–200 mm Resolution: 0.01 mm / 0.0005 in Weight: 0.58 kg Power supply: 3 V Numbers Jaw length: 120/50 mm Display functions: ON/OFF, ZERO, UNIT, HOLD Material: Hardened stainless steel, metal housing Data output: RB 5 Special features Sliding (adjustable) jaw Protective transport case for delivery Factory standard specification (werksnorm) Suitable for standard workshop measurement category FAQ What measuring range does the caliper cover? The instrument covers 0–200 mm and is classified in the standard measuring range suitable for general machine‑shop and workshop tasks. What resolution and display functions are provided? The caliper provides a 0.01 mm resolution (0.0005 in) and features ON/OFF, ZERO, UNIT and HOLD keys for straightforward operation. Is the tool ready for data logging? Yes. The caliper includes an RB 5 data output for connection to data loggers or inspection systems to support traceable measurement records. Does the delivery include protective packaging? The product is supplied in a protective transport case to safeguard the instrument during transport and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Caliper With 80mm Depth Rod, 5mm Bore, Preset Display, Stainless Steel, Plastic Case - Metav IndustryLine
Take advantage of precise, repeatable readings thanks to the 0.01 mm resolution and the convenient preset function; the robust INOX construction and metal housing support everyday workshop use. Order the caliper directly via Metav Werkzeuge or consult the Metav team for application advice. Digital-Uni-MS200 mm x 80 mm — digital precision caliper with INOX construction and preset function Digital-Uni-MS200 mm x 80 mm is a workshop caliper designed for reliable internal and external measurement tasks in metalworking and quality control. Digital display with 0.01 mm resolution 200 mm measuring range for standard workshop tasks INOX stainless construction and metal housing Preset function with ON/OFF and SET/PRESET buttons Faster, traceable readings for production environments Built around a clear digital display with a 0.01 mm reading step, this instrument reduces reading errors and speeds up inspection routines. The integrated preset (SET/PRESET) lets operators store a zero reference quickly, which improves reproducibility during batch checks. With a simple ON/OFF control, the instrument supports efficient changeover between parts and short cycle inspections, delivering measurable time savings in repetitive measurement tasks while maintaining industrial-grade precision. Robust mechanics and practical interfaces for the workshop Constructed in INOX with a solid metal housing, the caliper offers mechanical durability for daily use. The 200 mm measuring range places it in the Standard class for machine‑shop and metalwork applications, combining reach and stiffness for general-purpose measurement. The jaws extend 85 mm, the unit weighs 0.55 kg and includes a Ø5 mm bore for mounting measuring inserts or fixtures, enabling versatile fixturing options. A compact power solution (measuring system powered by 3 V) and a data output via RB 5 support integration into digital measurement workflows. Designed for quality workflows and dependable delivery As a factory‑standard instrument made for workshop inspection, the caliper supports rapid documentation and quality control steps. The RB 5 data output eases transfer to data collection systems, helping to reduce transcription errors and streamline traceability in inspection logs. Metav’s distribution combines practical availability with a commitment to consistent supply for industry: a proven partner for workshops and small-scale production that values straightforward, reliable measuring equipment. Contact Metav Werkzeuge for application guidance and to obtain the Digital-Uni-MS200 mm x 80 mm from Metav IndustryLine — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: M240.208.O GTIN: 4054469151960 Label: Digital-Uni-MS200 mm x 80 mm, Bohrung Ø=5 mm, without inserts, preset, INOX, factory standard Material: metal housing, stainless construction Data output: RB 5 Facts Measuring range: 0–200 mm Resolution / reading: 0.01 mm Jaws length: 85 mm Weight: 0.55 kg Measuring system power: 3 V Special features Digital display with ON/OFF and SET/PRESET buttons Preset (zeroing) function for repeatable measurements Bore for measuring inserts Ø 5 mm for fixture mounting Factory standard delivery Designed for internal and external measurement tasks FAQ What is the smallest increment readable on this caliper? The instrument reads in 0.01 mm increments; the Digital-Uni-MS200 mm x 80 mm is therefore suitable for standard workshop quality checks requiring this resolution. Is the caliper suitable for general mechanical workshop use? Yes; with a 0–200 mm range the tool falls into the Standard class for machine and metalwork tasks and balances reach with rigidity for everyday measurement needs. How can measurement data be exported from the caliper? Data is provided via the RB 5 output; the Digital-Uni-MS200 mm x 80 mm therefore supports connection to compatible data capture systems for streamlined logging. Is the caliper supplied calibrated to an accredited standard? The caliper is delivered to factory standard; no ISO 17025 calibration certificate is included with this item unless explicitly specified in the product label. Which materials and environments is the caliper built for? Constructed in stainless material with a metal housing, the instrument is robust for workshop environments and routine handling typical in inspection and production areas. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Depth Gauge Inductive IP67, MODE/INC/HOLD Display, CR2032 Battery - Metav IndustryLine
Take advantage of the combination of robust IP67 protection, an inductive measuring system and workshop‑grade hardened stainless steel for dependable depth measurement across routine production tasks; order the depth gauge directly via Metav Werkzeuge or ask our consultants if needed. Digital depth gauge M218.121.D — 200 mm range, IP67 protection (Metav IndustryLine) A Digital depth gauge M218.121.D for precise depth measurement in machine shops and maintenance work, featuring an inductive sensor and full dust‑ and splash‑proof protection. 200 mm measurement range, workshop standard IP67 waterproof and dustproof protection Inductive measuring system for reliable readings DIN 862 compliance, hardened stainless steel Durable protection that keeps measurements reliable The instrument is built for the workshop environment: IP67 sealing prevents dust ingress and protects against temporary immersion, while the hardened stainless steel body resists corrosion and everyday wear. This combination reduces downtime and maintenance needs, delivering a stable measuring platform that retains calibration through regular use. The build also keeps weight manageable at 0.4 kg, supporting handheld operation without excessive fatigue and ensuring the tool is practical for repeated checks on the production line. Precise, repeatable depth readings with inductive sensing Equipped with an inductive measuring system and a display resolution of 0.01 mm, this depth gauge provides clear, repeatable values suitable for standard quality control tasks. The unit meets DIN 862 conventions for caliper‑type instruments and covers a 0–200 mm range, classified as a Standard workshop size that balances reach and stiffness for typical machine‑shop components. Readout functions (MODE, INC, HOLD and 0/ON) support simple workflows, while the absence of a data output means readings are taken directly from the display for immediate decisions on the shop floor. Practical operation and service features for everyday use Operation is designed for clarity: the large digital readout and tactile buttons enable fast zeroing, incremental measurements and value hold for transfer to inspection records. Power is supplied by a 3 V CR2032 battery, a common and easy‑to‑replace cell that keeps service straightforward. The compact form factor and robust construction make the gauge well suited to bench work and on‑machine checks, offering a reliable tool for machinists, maintenance staff and inspection personnel who require a durable, manual depth measuring instrument. Consider the Metav IndustryLine depth gauge for robust, IP67‑rated depth measurement and contact Metav Werkzeuge for ordering details or technical advice. Technical data Article number: M218.121.D GTIN: 4054469182940 Brand: Metav IndustryLine Facts Measurement range: 0–200 mm Resolution: 0.01 mm Weight: 0.4 kg Battery: 3 V CR 2032 Bridge: 100 mm Special features Material: hardened stainless steel Protection class: IP67 Measuring system: inductive Display functions: MODE, INC, HOLD, 0/ON Standard: DIN 862 No data output (manual readout) FAQ What measurement range does the depth gauge cover? The instrument provides a measurement range of 0–200 mm, placing it in the Standard caliper class (100–300 mm), which suits general machine‑shop and metalworking tasks. How accurate are the readings and what resolution is shown? The digital readout offers a resolution of 0.01 mm; the device follows DIN 862 conventions for caliper instruments and is intended for standard workshop quality control. Is the gauge suitable for use at the machine or on the shop floor? Yes. IP67 protection and a hardened stainless‑steel body make the tool resistant to dust and splash exposure, making it appropriate for workshop environments and on‑machine checks. Does the depth gauge provide a data interface for SPC systems? This model is supplied without data output; readings are taken directly from the display and recorded manually. What powers the display and how easy is maintenance? The unit uses a 3 V CR2032 battery, a widely available cell that is simple to replace, reducing maintenance complexity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision where standard calipers reach their limits
Specialised calipers (also available as specialist calipers and precision calipers) are engineered for measurements that conventional calipers cannot perform reliably. With custom‑shaped jaws, extended measuring ranges and advanced materials, these tools deliver reproducible results down to the micrometre range, making them indispensable for difficult‑to‑access features such as fine grooves, deep bores and complex contours.
How these calipers tackle demanding measurement tasks
Specialised calipers work by adapting jaw geometry and sensing technology to the application: pointed, blade‑shaped, round or offset jaws capture inside and outside dimensions in confined geometries, while digital, analogue and inductive sensing cover different shop and lab requirements. Digital variants offer quick readouts and data transfer via Bluetooth/USB; analogue models remain reliable in humid or rough workshop environments; inductive versions provide extreme accuracy of ±0.001 mm (1 μm), suited to inspection rooms and laboratories. Wear‑resistant materials such as carbide or ceramic tips withstand coolants, abrasion and corrosion for sustained accuracy.
Measurable benefits for production and inspection
- Faster, repeatable measurements in constrained geometries, reducing inspection time.
- Reproducible results to the micrometre range, raising process reliability.
- Longer service life thanks to carbide or ceramic tips, lowering tool replacement frequency.
- Seamless data integration: digital specialised calipers can feed results directly into CAQ systems via Bluetooth/USB, supporting inline quality control.
- Robust performance across environments—from workshop floors to clean labs—thanks to analogue and inductive options.
Metav as a dependable partner for precision measurement
Metav combines decades of expertise with a comprehensive selection for industry, craft and trade. From Emmerich, Metav operates as a quality filter for the European market, supplying high‑precision tools across more than 250,000 product lines. Trusted by over 48,000 customers, Metav makes high accuracy accessible to every workshop while ensuring reliable fulfilment and consistent product quality.
FAQ
What accuracy can I expect from specialised calipers?
Inductive specialised calipers achieve extreme accuracy of ±0.001 mm (1 μm); digital models enable quick readout and transfer, while analogue versions provide reliable shop‑floor stability.
Which jaw shapes are available and what are they best for?
Specialised calipers come with pointed, blade‑shaped, round and offset jaws designed to measure features such as wall thickness of glass ampoules, gear tooth profiles and O‑ring grooves that standard calipers cannot access.
Can specialised calipers be used for inline quality control?
Yes. Digital specialised calipers with Bluetooth/USB support direct data transfer to CAQ systems, enabling inline testing and automated documentation in series production.
Are there variants suited to harsh workshop environments?
Analogue specialised calipers are less sensitive to moisture and rough handling, and units fitted with carbide or ceramic tips resist coolants, abrasion and corrosion for durable, accurate performance.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com