Precise T-slot cutters for reliable fixture machining
T-slot cutters are engineered to produce the undercut head of a T-shaped slot in machine tables and fixture plates, providing secure, adjustable clamping for workpieces while the cutter shaft runs in a pre-machined guide. Using cutters with internal coolant channels ensures consistent delivery of high-pressure coolant directly to the cutting edges, which effectively removes chips from the enclosed cutting zone and dissipates process heat to prevent chip jamming and tool breakage. These tools are essential when machining hardened or long-duration setups where external coolant is ineffective, offering improved tool life, repeatable slot geometry and reduced downtime through reliable chip evacuation. The category also covers matching variants and complementary tooling such as twist drill adapters and precision caliper-referenced setups for precise positioning.
25mm T-Slot Cutter 4 Flutes 32.5mm Cutting Length, 20mm Shank - Teknik Makina
Take advantage of precise T‑slot machining combined with reliable indexable‑insert compatibility and robust shank retention for uninterrupted production. Order the tool directly via Metav Werkzeuge or contact their specialists for technical advice and delivery from Emmerich. T-Nut Fräser — 25 mm, 4‑cut T‑slot cutter (Teknik Makina) The T-Nut Fräser is a purpose‑built T‑slot cutter for milling T‑grooves using indexable CCMT 0602 inserts, suitable for standard milling machines and powered toolholders. 25 mm cutting diameter, 4 flutes Compatible with CCMT 0602 inserts 20 mm shank diameter for secure clamping 100 mm overall length, 11 mm cutting height High‑precision T‑slot machining for consistent results This cutter delivers repeatable slot geometry through a stable flute configuration and a defined cutting height. The combination of a 25 mm diameter and 4 flutes ensures balanced chip evacuation and steady radial engagement, reducing vibration and runout. For workshops seeking reproducible T‑slot profiles, the tool provides a measurable improvement in surface consistency and setup reliability, supporting higher first‑pass yields and fewer reworks. Insert system and productivity benefits Designed for use with CCMT 0602 indexable inserts, the cutter reduces downtime by enabling fast insert changes without regrinding. The insert format offers established wear behaviour and a wide selection of grades, which translates into tailored solutions for typical industrial feeds and speeds. As a result, cycle times can be optimised while maintaining edge life, supporting a favourable cost‑per‑slot calculation in batch and series production. Secure mounting and cutting geometry that aids stability A 20 mm shank diameter with precisely machined interfaces improves clamping confidence in standard collets and chucks, lowering the risk of slippage under load. The tool provides a 32.5 mm cutting length on the shank and an 11 mm cutting height, enabling confident depth control for common T‑slot dimensions. This geometry simplifies process planning: a compact overall length of 100 mm helps reduce overhang, thereby improving dynamic rigidity during plunge and peripheral passes. Practical workshop advantages and handling With a mass of 1.232 kg, the cutter is substantial enough for stable cutting dynamics yet easy to handle during insert changes and setup. The tool accepts standard fastenings (Torx screw M2.5 x 3.5, Torx key T8) for secure insert retention, streamlining maintenance routines. Clear specification of shank and cutting dimensions supports CNC programme parameterisation and tool data entry in ERP or tool management systems, aiding a predictable production workflow. Contact Metav Werkzeuge today to discuss delivery options for the Teknik Makina T‑slot cutter TKC100TM or to request tailored machining advice directly from their Emmerich facility: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: TKC100TM Manufacturer: Teknik Makina Designation: T‑Nut Fräser Facts Cutting diameter: 25 mm Number of cutting edges: 4 Overall length: 100 mm Shank diameter: 20 mm Shank cutting length: 32.5 mm Cutting height: 11 mm Weight: 1.232 kg Special features Compatible inserts: CCMT 0602 Torx screw: M2.5 x 3.5 Torx key size: T8 Shank cutting diameter: 15 mm FAQ What type of inserts does the cutter use? The cutter is specified for CCMT 0602 indexable inserts, a common format that allows quick replacement and a wide selection of grades for different materials. Which machine setup is suitable for this T‑slot cutter? The tool is intended for standard milling machines and rigid toolholders where a 20 mm shank can be securely clamped; the compact 100 mm overall length helps minimise overhang. What are the key dimensions to enter in a tool manager? Relevant entries are cutting diameter 25 mm, overall length 100 mm, shank diameter 20 mm, and cutting height 11 mm for correct tool‑path calculation. How is insert retention handled on this cutter? Insert retention uses a Torx screw M2.5 x 3.5 tightened with a T8 key, providing stable clamping and easy maintenance without special tools. What is the product code for ordering or referencing? Refer to the SKU TKC100TM when ordering or requesting technical details from Teknik Makina or Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm T-Slot Cutter for SPMG 05 Indexable Inserts L100mm, 4 Flutes - Teknik Makina
Combining a robust 25 mm shank with compatibility for SPMG 05 indexable inserts, this cutter offers repeatable T-slot geometry and straightforward insert changes. The four cutting edges and a 5 mm cutting height support steady material removal and predictable performance. Order the tool directly via Metav Werkzeuge or consult their technical advisors for application guidance. T-slot cutter TKC049TM — 25 mm Ø, compatible with SPMG 05 indexable inserts (Teknik Makina) A T-slot cutter designed for efficient production of T-slots using SPMG 05 indexable inserts, suited to industrial workshop and fixture machining 25 mm diameter T-slot cutter Compatible with SPMG 05 indexable inserts 100 mm overall length, 20 mm cutting shank Four cutting edges, 5 mm cutting height Robust design for consistent T-slot geometry The design centres on a 25 mm shank that provides rigidity and vibration resistance, which supports consistent groove form during repetitive operations. With a 20 mm cutting shank and an overall length of 100 mm, the assembly balances accessibility with stability, helping to maintain dimensional repeatability in serial production. The indexable concept, based on SPMG 05 indexable inserts, reduces non-productive time: inserts can be rotated or replaced quickly, so tool life management becomes predictable and machining cycles remain uninterrupted. Efficient cutting and predictable tool life Equipped with four cutting edges, the cutter delivers an even load distribution that reduces peak stresses and promotes smooth chip evacuation. The 5 mm cutting height is matched to commonly required T-slot profiles, enabling reliable material engagement without excessive axial load. Because the insert system is an established standard, compatible inserts from suppliers such as Taegutec are usable, which simplifies procurement and supports cost-effective maintenance. The balanced geometry and standardised fastenings contribute to lower downtime and improved throughput per production shift. Practical handling and straightforward maintenance Maintenance is simplified by the indexable design and standard fasteners: the insert is secured with an M2x4.2 Torx screw and serviced using a T6 Torx key, enabling quick, repeatable insert changes without specialised tools. The cutter’s moderate mass (approx. 0.412 kg) and standard shank diameter facilitate secure clamping in conventional toolholders while allowing safe handling during setup. The modular concept ensures that worn cutting edges are replaced rather than the whole tool, which supports sustainability and reduces consumable costs over time. Contact Metav Werkzeuge for availability, application advice and order handling for the Teknik Makina TKC049TM T-slot cutter — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: TKC049TM Label: 25mm T-Nut Fräser SPMG 05 L100mm Product type: T-slot cutter Manufacturer: Teknik Makina Facts Diameter: 25 mm Overall length: 100 mm Shank diameter: 25 mm Cutting shank length: 20 mm Cutting edges: 4 Cutting height: 5 mm Weight: 0.412 kg eClass: 21180605 Special features Compatible with SPMG 05 indexable inserts Compatible insert manufacturer: Taegutec Torx screw: M2x4.2 Torx key: T6 SKU: TKC049TM FAQ Which insert type fits this cutter? The cutter accepts SPMG 05 indexable inserts; compatible inserts from Taegutec can be used with the Teknik Makina TKC049TM. What is the shank diameter and overall length? The tool has a 25 mm shank diameter and an overall length of 100 mm. How many cutting edges does it have and what is the cutting height? The cutter is equipped with four cutting edges and a 5 mm cutting height. Which fastening system secures the inserts? Inserts are secured with an M2x4.2 Torx screw, tightened and loosened using a T6 Torx key for consistent clamping. For what tasks is this tool intended? The TKC049TM is intended for producing T-slots using the SPMG 05 insert system, suitable for fixture and table slot machining where indexable insert solutions are preferred Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26mm T-Nut Cutter For CCMT 09T3 Indexable Inserts L180mm With Internal Coolant - Teknik Makina
Take advantage of a robust combination of 26 mm diameter, internal coolant and compatibility with CCMT 09T3 indexable inserts for reliable T‑slot machining. Order the cutter directly via Metav Werkzeuge or consult our team for integration advice. T‑Nut Cutter — 26 mm diameter, internal coolant, for CCMT 09T3 (Teknik Makina) A T‑Nut Cutter engineered for accurate T‑slot milling with CCMT 09T3 indexable inserts, suitable for production environments and precision workshop tasks 26 mm cutting diameter for standard T‑slots Integrated internal coolant for tool life and chip control Compatible with CCMT 09T3 indexable inserts 25 mm solid shank for secure clamping Easy insert fastening with Torx T15 Precision T‑slot machining with standard indexable inserts This T‑slot cutter provides a cost‑efficient approach to producing clean, repeatable T‑slots by using industry‑standard CCMT 09T3 indexable inserts. The combination of a 26 mm diameter and a controlled cutting geometry means that slot profiles remain consistent across batches, reducing secondary operations and rework. The use of indexable inserts allows quick replacement of worn cutting edges, lowering per‑cut costs and simplifying stock control for maintenance teams. The cutter is identifiable as TKC158TM for ordering and inventory. Stable setup and improved process reliability Designed with a 25 mm shank and an 180 mm overall length, the tool balances reach and rigidity to suit milling heads and machining centres. A 50 mm cutting length and 2 cutting edges deliver steady material removal rates while keeping required spindle power modest. Integrated internal coolant channels feed cutting zones directly, improving lubrication and chip evacuation; this reduces heat‑related wear and extends insert life, therefore increasing uptime in continuous production cycles. The tool’s compact mass (approx. 0.575 kg) supports dynamic handling without compromising stability. Simple maintenance and shopfloor integration Insert retention uses a Torx T15 key and M3.5x8.5 fastening screws for secure, repeatable clamping and straightforward replacement procedures. The cutter is compatible with standard toolholders for T‑slot operations, enabling quick swaps within existing toolsets. Alongside the robust mechanical design, the cutter’s specification simplifies procurement and inventory processes through the clear SKU TKC158TM and manufacturer designation. For teams consolidating tooling suppliers, this cutter integrates seamlessly into routines that prioritise efficiency and predictable performance. For advice on integrating Teknik Makina T‑slot cutters into production or to request an order via Metav Werkzeuge, contact our specialists at Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 — our consultants will assist with technical suitability and delivery options Technical data Article number: TKC158TM Product type: T‑Nut Cutter Manufacturer: Teknik Makina Label: 26mm T‑Nut Fräser CCMT 09T3 L180mm mit Innenkühlung Facts Cutting diameter: 26 mm Overall length: 180 mm Shank diameter: 25 mm Cutting length: 50 mm Number of cutting edges: 2 Weight: 0.575 kg Insert type: CCMT 09T3 Fastening screw: M3.5x8.5 Torx key: T15 Special features Internal coolant Compatible with CCMT 09T3 indexable inserts Solid shank for secure clamping Standardised insert fixing for fast maintenance SKU: TKC158TM FAQ What material scope is this T‑slot cutter designed for? The T‑slot cutter is specified for general milling with CCMT 09T3 indexable inserts; material suitability depends on the chosen insert grade rather than the cutter body alone. How does internal coolant improve performance? Internal coolant supplies lubricant and cooling directly to the cutting zone, which helps the CCMT 09T3 inserts maintain cutting edges longer and improves chip evacuation during T‑slot milling. What toolholder is required for secure clamping? A standard holder accepting a 25 mm shank is required; the cutter’s solid shank ensures stable clamping in conventional milling arbors and extensions. How are inserts fastened and replaced? Inserts are secured with M3.5x8.5 screws tightened using a Torx T15 key, enabling quick and repeatable replacement on the shopfloor. Can this cutter be used in a machining centre for batch production? Yes, the cutter’s design — including internal coolant, solid shank and repeatable insert clamping — makes it suitable for both single‑part and batch production when fitted with appropriate CCMT insert grades Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26mm T-Nut Cutter For CCMT 09T3 With Internal Cooling, 25mm Shank - Teknik Makina
Take advantage of a robust combination of precise cutting geometry and integrated coolant for longer insert life and steady production. The 26 mm cutting diameter together with a 25 mm shaft and 135 mm overall length delivers both reach and rigidity — order or request advice via Metav Werkzeuge for fast procurement and application support. T-slot cutter for CCMT 09T3 indexable inserts — 26 mm, internal coolant (Teknik Makina) The T-slot cutter is designed for producing accurate T-shaped grooves using CCMT 09T3 indexable inserts, combining stability and coolant-fed performance for workshop and light production use. 26 mm cutting diameter Internal coolant delivery Compatible with CCMT 09T3 inserts 25 mm shaft diameter Reproducible T-slot geometry for consistent results The cutter ensures repeatable slot profiles by using proven indexable insert geometry. With a 26 mm cutting diameter and compatibility with CCMT 09T3 inserts, the tool secures dimensional consistency across batches. The two cutting edges balance material removal and surface finish, reducing rework and setup time. This controlled removal rate supports predictable cycle times and makes the tool suitable for jobbing shops and production lines where identical slot dimensions are required. Integrated coolant and rigid shank for longer tool life Internal coolant delivery targets the cutting zone directly, improving chip evacuation and cooling at the insert edge. The internal feed, identified as internal coolant, helps extend insert life and maintain surface quality under higher cutting speeds. Combined with a 25 mm shaft diameter and a 135 mm overall length, the design provides the necessary rigidity for stable cutting, lowering vibration and the risk of premature edge wear. These mechanical properties translate into fewer tool changes and less unplanned downtime. Simple insert service and system compatibility Insert changes are quick and standardised: the cutter accepts CCMT 09T3 indexable inserts and secures them with a Torx screw. The supplied fastening uses a Torx T15 interface and M3.5x8.5 Torx screw, enabling straightforward replacement with common workshop tools. Identified as TKC156TM, the tool integrates easily into existing toolholders and production processes, providing immediate compatibility with indexable-insert systems and keeping maintenance predictable and efficient. For procurement or detailed application advice on the Teknik Makina T-slot cutter with internal coolant, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss suitability for specific materials and setups. Technical data SKU: TKC156TM Label: 26mm T-Nut Fräser CCMT 09T3 L135mm mit Innenkühlung Manufacturer: Teknik Makina ECLASS: 21180605 Weight: 0.415 kg Core data Cutting diameter: 26 mm Shaft diameter: 25 mm Total length: 135 mm Cutting/shaft cutting length: 50 mm Number of cutting edges: 2 Materials & features Internal coolant: Yes Compatible inserts: CCMT 09T3 Torx key: T15 Torx screw: M3.5x8.5 Product type: T-slot cutter UID/SKU: TKC156TM FAQ How accurate is the slot geometry produced with this cutter? The cutter, designed for CCMT 09T3 indexable inserts, delivers repeatable slot geometry thanks to its 26 mm diameter and stable shank, offering consistent dimensional results in series production. Can this tool be cooled internally with standard plant coolant systems? Yes, the internal coolant configuration provides directed coolant flow to the cutting edge; the cutter is intended to be used with standard soluble or synthetic coolants as available in workshop systems. Which inserts and fastening parts are required for operation? The cutter accepts CCMT 09T3 indexable inserts and secures them with a Torx screw (M3.5x8.5) using a Torx T15 driver; these are standard items in most tooling inventories. Is the shank dimension suitable for conventional toolholders? The 25 mm shaft diameter is compatible with holders and arbors that accept a 25 mm shank, providing the rigidity expected for T-slot milling tasks. What is the product reference for ordering and stock queries? Order or reference TKC156TM (Teknik Makina) for procurement and stock checks; Metav Werkzeuge can confirm availability and delivery options. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26mm T-Nut Cutter For RD-- 12 Indexable Inserts L120mm, 25mm Shank - Teknik Makina
Take advantage of a robust combination of compatibility, rigid shank design and concise cutting capacity to ensure consistent T-slot seats and efficient insert changes on the shop floor; order the T-nut cutter directly via Metav Werkzeuge or consult our technical team for application advice. T-nut cutter TKC178TM — 26 mm diameter, for RD-- 12 indexable inserts (Teknik Makina) The T-nut cutter TKC178TM is a precision T-slot milling tool designed to machine reliable T-slot profiles using RD-- 12 indexable inserts, suitable for fixture plates and tooling applications. 26 mm diameter for standard T-slots Compatible with RD-- 12 indexable inserts 120 mm overall length for deeper slots 25 mm shank for rigid clamping Consistent T-slot geometry for repeatable assemblies The cutter produces a stable T-slot profile thanks to its 26 mm diameter and controlled geometry, delivering repeatable seating for nuts and fixtures. The use of RD-- 12 indexable inserts simplifies chip control and seat restoration after regrinding or replacement. With an effective cutting length of 30 mm and an overall tool length of 120 mm, the design balances accessibility with stability to maintain consistent dimensions across series production. This leads to fewer rejects and reduced rework in assembly operations. Secure mounting and vibration control for precision milling A 25 mm shank ensures secure clamping in standard toolholders and minimises runout, which improves edge life and surface finish. The cutter secures inserts with a Torx T15 drive and M3.5x8.5 clamping screws, enabling reliable seating and repeatable torque during maintenance. The two cutting edges lower cutting forces per tooth, which helps reduce chatter and maintains concentricity when machining T-slots in batches. These features combine to give a predictable, high-quality milling process that supports tighter tolerances. Efficient handling and straightforward insert changes on the shop floor Indexable design accelerates maintenance cycles: worn cutting edges are replaced rather than the entire tool, shortening downtime and improving throughput. The tool’s moderate weight of 0.415 kg and its compact profile make handling simple during tool changes, while the TKC178TM label supports clear inventory tracking. For production planners, this cutter represents a pragmatic balance between serviceability and machining performance, supporting continuous operation with minimal intervention and clear parts identification for replenishment. For reliable T-slot milling with Teknik Makina quality and Metav’s precision supply chain, contact Metav Werkzeuge for availability and technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TKC178TM Label: 26mm T-Nut Fräser RD-- 12 L120mm Product type: T-Nut Fräser Manufacturer: Teknik Makina Facts Diameter: 26 mm Overall length: 120 mm Shank diameter: 25 mm Cutting length: 30 mm Cutting edges: 2 Weight: 0.415 kg Special features For RD-- 12 indexable inserts Torx key: T15 Torx screw: M3.5x8.5 SKU: TKC178TM FAQ Which insert type fits this cutter? The cutter uses RD-- 12 indexable inserts; the system is designed for straightforward replacement and chip control with that insert family. What shank diameter is required for secure clamping? A 25 mm shank is specified for stable clamping and reduced runout when the tool is held in a compatible holder. How deep can the cutter machine a T-slot? The tool has a cutting length of 30 mm and an overall length of 120 mm, which determines the practical slot depth and access in most fixture setups. How many cutting edges does the tool have and why does that matter? The cutter has 2 cutting edges, which balances material removal rate and cutting force per tooth to reduce vibration and improve surface finish. Is this cutter suitable for series production and quick maintenance? Yes; the indexable insert concept and simple clamping with Torx T15 / M3.5x8.5 screws enable fast insert changes and sustained productivity in production environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26mm T-Nut Cutter for TCMT 1102 Indexable Inserts With Internal Coolant, 55° Cutting Angle - Teknik Makina
With a secure Ø20 mm shank and coolant-through capability, this cutter produces repeatable, clean T-slot profiles while reducing tool change downtime; its compatibility with TCMT 1102 indexable inserts ensures economical insert replacement. Order the tool directly via Metav Werkzeuge or ask our consultants for tailored advice if needed. T-slot cutter — 26 mm diameter, internal coolant, for TCMT 1102 (Teknik Makina) T-slot cutter designed for precision T-slot milling using TCMT 1102 indexable inserts; ideal for stable, repeatable slot production in industrial machining environments 26 mm cutting diameter Internal coolant through shank Shank Ø 20 mm for secure clamping Compatible with TCMT 1102 inserts Consistent slot geometry and controlled chip formation The cutter delivers a stable machining result thanks to its 26 mm diameter and 3 flutes, combined with a 55° cutting angle that balances cutting force and surface finish. By accepting TCMT 1102 indexable inserts, the tool reduces overall tooling costs because inserts can be rotated or replaced individually without changing the holder. The geometry supports controlled chip breakage and predictable material removal, which contributes to repeatable T-slot profiles and minimised rework. Robust mounting and coolant support for longer tool life Designed with a Ø20 mm shank and a 150 mm overall length, the tool offers secure clamping and sufficient reach for most T-slot operations. The 50 mm cutting length provides the necessary engagement for common slot depths while keeping overhang and vibration low. The internal coolant feed improves lubrication at the cutting edge, enhancing insert life and reducing heat-related wear. This combination lowers maintenance intervals and keeps production lines running smoothly. Workflow efficiency and compatibility with workshop setups Lightweight yet sturdy construction (approx. 0.328 kg) keeps handling and tool changes straightforward while maintaining rigidity in the spindle. The item marked TKC166TM from Teknik Makina integrates into standard indexing systems for insert milling and uses a Torx screw M2.5x5.5 tightened with a T8 key for rapid, secure insert changes. For workshops aiming to streamline operations, the cutter supports quick insert changes and consistent results, contributing to higher first-pass yield and lower cycle-time variability. Contact Metav Werkzeuge for a technical consultation and fast supply from Emmerich — request further details on the Teknik Makina T-slot cutter TKC166TM with internal coolant. Technical Data SKU: TKC166TM Product type: T-slot cutter Designation: T-slot cutter for TCMT 1102 indexable inserts Brand: Teknik Makina Facts Diameter: 26 mm Overall length: 150 mm Shank diameter: 20 mm Cutting length: 50 mm Cutting edges: 3 Cutting angle: 55° Weight: 0.328 kg Torx key: T8 Torx screw: M2.5x5.5 Internal coolant: yes Special features Compatible with TCMT 1102 indexable inserts Coolant-through shank for improved lubrication Suitable for indexable insert T-slot milling SKU reference TKC166TM Manufacturer: Teknik Makina FAQ Which insert type is required for this cutter? The cutter accepts TCMT 1102 indexable inserts; TKC166TM is designed around that insert geometry for reliable seating and correct cutting clearance. Is coolant-through available on this tool? Yes — the tool features internal coolant delivered through the shank to the cutting zone to improve lubrication and extend insert life. What clamping size is required in the toolholder? A toolholder with a 20 mm bore is required; the shank diameter is Ø20 mm, ensuring a rigid connection for stable milling. How are the inserts fixed and which key is required? Inserts are secured with a Torx screw M2.5x5.5; a T8 Torx key is used for tightening and replacement of the inserts. What are the main cutting geometry specifications? The tool has a 26 mm cutting diameter, 3 flutes, and a 55° cutting angle, providing a balance between material removal rate and surface finish. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
27mm Adjustable Chamfer Cutter TCMT 1102 Indexable Inserts, 10–80° Angle, 20mm Shank - Teknik Makina
Benefit from flexible, precise chamfering thanks to the adjustable angle range and compatibility with standard indexable inserts; combine the 10–80° angle adjustability with the use of TCMT 1102 inserts for rapid changeovers and consistent edge quality — order the AH10TM directly via Metav Werkzeuge or consult our application specialists for optimum integration. Adjustable Chamfer Cutter AH10TM – TCMT 1102 compatible, 10–80° adjustable angle (Teknik Makina) The Adjustable Chamfer Cutter AH10TM provides a compact, angle-variable solution for chamfering and edge preparation tasks across turning and small milling set-ups. Adjustable chamfering angle 10–80° Accepts TCMT 1102 indexable inserts 20 mm shank for standard toolholders Max cutting diameter 27 mm, weight 0.241 kg Greater machining flexibility with a wide angle range The AH10TM delivers a wide adjustment range (10–80°), enabling one tool to replace multiple fixed chamfer cutters and so reduce tool changes and inventory. The adjustable angle is set and secured via a simple clamping mechanism, which shortens set-up time and ensures repeatable edge geometry. For production environments where cycle time and part consistency matter, this flexibility translates directly into fewer interruptions and a more streamlined workflow. Secure insert system for predictable performance Designed for indexable TCMT 1102 inserts, the toolhead accommodates commonly used carbide grades, allowing the cutting geometry to be tailored to different workpiece materials by selecting the appropriate insert specification. The insert is retained with an M2.5×7 Torx screw and is served by a T8 Torx key, providing a secure, low-maintenance clamping arrangement that minimises vibration and thermal movement during cutting. This results in stable cutting forces and consistent chamfer profiles across batches. Compact shank and robust cutting capacity for easy integration With a 20 mm shank diameter and a maximum cutting diameter of 27 mm, the cutter is sized to fit standard toolholders while delivering sufficient reach for many chamfering operations. The modest weight of 0.241 kg reduces spindle load and contributes to easier handling during tool changes. The compact design supports integration into both manual and CNC-driven workflows where space is limited but precision is required. Practical maintenance and shop-floor advantages Maintenance is straightforward: replacement inserts and the Torx screw are standardised components, reducing downtime and simplifying spares management. The tool’s acceptance of TCMT 1102 plates allows existing insert stocks to be reused, cutting procurement complexity. Clear, repeatable set-up and easy access to the fastening screw contribute to lower process variation and predictable output quality, which is particularly valuable for small-series production and repair tasks. Contact Metav Werkzeuge for tailored chamfering advice and to order the Teknik Makina AH10TM via Metav's specialists at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: AH10TM Manufacturer: Teknik Makina Article name: Adjustable chamfer cutter (verstellbar) Compatible inserts: TCMT 1102 Facts Angle range: 10–80° Max cutting diameter: 27 mm Shank diameter: 20 mm Weight: 0.241 kg Diameter: 5 mm ECLASS: 21180801 ETIM: EC011860 Flex mounting designation: S1473 Special features M2.5×7 Torx screw for insert retention Torx key size T8 Indexable insert system for rapid change Compact, lightweight construction FAQ Which inserts fit the cutter? The cutter uses TCMT 1102 indexable inserts; the AH10TM is specified for that insert geometry and will accept standard TCMT 1102 grades. How is the chamfer angle adjusted and secured? The chamfer angle is adjusted across the 10–80° range and locked by the cutter’s clamping mechanism to maintain repeatability during production. What toolholder shank is required? A toolholder that accepts a 20 mm shank is required; the compact shank diameter supports a broad range of standard holders. Is specialised maintenance required for the fastening hardware? Insert changes and screw checks are maintenance tasks carried out with a T8 Torx key and the M2.5×7 screw; these are standardised parts that simplify routine upkeep. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
28mm T-Nut Cutter for SCMT 09T3 Indexable Inserts 40mm Cutting Length, 16mm Shank - Teknik Makina
Take advantage of the 28 mm cutting diameter and compatibility with SCMT 09T3 indexable inserts for consistent, repeatable T-slot production; the robust 16 mm shank and Torx-fastened inserts ensure secure clamping and fast tooling changes. Order the T-slot cutter directly via Metav Werkzeuge or request advice from our consultants for application-specific setup. T-slot cutter TKC192TM — 28 mm diameter, for SCMT 09T3 indexable inserts (Teknik Makina) A T-slot cutter for SCMT 09T3 indexable inserts, designed to produce precise T-slots in standard milling operations with efficient insert replacement and dependable clamping. 28 mm cutting diameter for precise T-slots Accepts SCMT 09T3 indexable inserts 16 mm shank diameter for secure clamping Faster slotting with consistent cutting geometry The 28 mm cutting diameter combined with a 55° cutting angle provides a stable engagement geometry, which reduces vibration and promotes consistent slot profiles across runs. With two cutting edges, the tool balances load distribution and simplifies machining strategies, enabling shorter cycle times on repetitive tasks. The compatibility with SCMT 09T3 indexable inserts allows the use of established grades for varied workpiece requirements while maintaining predictable performance. Secure mounting and quick insert maintenance A 16 mm shank with an overall length of 100 mm offers rigid support for standard collets and holders, improving concentricity during operation. The insert is secured with a M3.5x8.5 Torx screw, tightened with a T15 Torx key, which standardises service procedures and minimises downtime. The low mass of the assembly (approx. 0.132 kg) aids rapid acceleration and deceleration when employed in automated cycles, while the straightforward screw‑retention system keeps maintenance time to a minimum. Built for productive workshops with reliable sourcing Designed for use in professional milling environments, this cutter body accepts industry-standard inserts and fits established toolholder systems, simplifying inventory management. The combination of precise geometry and standardised fastening supports reproducible results batch after batch. Backing from an experienced supplier ensures consistent availability and traceable quality control, supporting continuous production without unnecessary interruptions. For secure procurement and application guidance on the Teknik Makina TKC192TM T-slot cutter, contact Metav Werkzeuge for order coordination and technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: TKC192TM Manufacturer: Teknik Makina EClass: 21180605 Facts Cutting diameter: 28 mm Overall length: 100 mm Shank diameter: 16 mm Cutting length (shaft): 40 mm Cutting edges: 2 Cutting angle: 55° Weight: 0.132 kg Special features For SCMT 09T3 indexable inserts Torx screw M3.5x8.5 for insert clamping Torx key: T15 Product type: T-slot cutter Label: 28mm T-Nut Fräser SCMT 09T3 L100mm FAQ What insert type is required for this cutter? The cutter accepts SCMT 09T3 indexable inserts; this designation is specified for the TKC192TM body and matches common triangular insert families. Which toolholder systems suit the cutter's shank? The 16 mm shank is compatible with standard collets and holders designed for 16 mm tool shanks; ensure correct clamping for optimal concentricity. How are inserts secured and changed? Inserts are clamped with a M3.5x8.5 Torx screw and a T15 Torx key is used for tightening and removal, allowing rapid and repeatable insert changes. Is the cutter balanced for high-speed milling? The two‑edge design and compact mass (approx. 0.132 kg) support stable operation; however, balance checks and holder compatibility checks are recommended for high peripheral speeds. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
28mm T-Nut Cutter for SCMT 09T3 Indexable Inserts 55° Cutting Angle, L200mm - Teknik Makina
Take advantage of precise T-slot cutting with a 28 mm diameter tool and reliable compatibility with SCMT 09T3 indexable inserts to maintain consistent slot geometry and production tempo; order directly via Metav Werkzeuge or consult our specialists for application advice. T-slot cutter for SCMT 09T3 indexable inserts — 28 mm, L200 mm (Teknik Makina) T-slot cutter for precise machining of T-slots and T-nuts using SCMT 09T3 indexable inserts, designed for secure clamping and repeatable slot geometry in production environments. 28 mm diameter for deep T-slots Designed for SCMT 09T3 indexable inserts 16 mm shank for secure clamping T15 Torx fixing, M3.5x8.5 screw Consistent slot geometry through precise cutting mechanics The cutter provides a reliable solution for producing uniform T-slots, with a 28 mm nominal diameter and a 55° cutting angle that together ensure predictable chip flow and stable slot profiles. Using SCMT 09T3 indexable inserts allows fast seat-and-run replacement, reducing downtime and keeping cycle times low. The two cutting edges deliver a balanced cut that minimises vibration and results in repeatable dimensions across a batch, which is vital when tolerance control and interchangeability are required on jigs, fixtures and component assemblies. Stable clamping and tool life for uninterrupted machining A 16 mm shank and a compact overall length of 200 mm combine to deliver good rigidity for slotting operations from the arbor or holder. Secure fastening is achieved with a T15 Torx drive and an M3.5x8.5 screw, providing repeatable insert retention under moderate cutting forces. The modest tool mass supports reduced spindle load and controlled runout, contributing to longer insert life and predictable maintenance intervals. This mechanical reliability translates into fewer interventions at the machine and steadier production throughput. Indexable system benefits and integration into tooling strategies Adopting an indexable T-slot cutter simplifies tooling logistics: the insert-based concept allows stocking fewer cutters while keeping a supply of SCMT 09T3 inserts for fast replenishment. The tool is suited to series production where changeover speed and consistent surface finish matter; replacing inserts is quicker and more economical than regrinding solid tools. Paired with a coherent holder strategy, the cutter supports a cost-effective route to maintaining quality across multiple workpieces, while the compatible design from Teknik Makina aligns with standard holder interfaces for straightforward integration. Contact Metav Werkzeuge for tailored application support and to discuss suitable insert grades or machining parameters for specific materials. Technical data Article number: TKC195TM Label: 28mm T-Nut Fräser SCMT 09T3 L200mm Manufacturer: Teknik Makina Numerical data Diameter: 28 mm Overall length: 200 mm Weight: 0.272 kg Shank diameter: 16 mm Cutting length (shank): 32 mm Cutting edges: 2 Cutting angle: 55° Torx key: T15 Torx screw: M3.5x8.5 Special features Compatible with SCMT 09T3 indexable inserts Indexable insert system for fast replacement Two cutting edges for balanced machining Designed for T-slot / T-nut profile production FAQ What insert type does the cutter accept? The cutter accepts SCMT 09T3 indexable inserts, which are standard triangular inserts suitable for the intended T-slot geometry. Is the shank suitable for standard tool holders? Yes, the 16 mm shank is specified for secure clamping in compatible holders, providing good rigidity for slotting tasks. What is the nominal diameter and overall length? The tool is specified with a 28 mm diameter and an overall length of 200 mm, intended for T-slot production with adequate reach. How many cutting edges are fitted and what is the cutting angle? The cutter uses two cutting edges and a 55° cutting angle, optimised to balance chip evacuation and slot accuracy. Manufacturer: Teknik Cutting Tools; Buyukkayacık OSB Mah. 422 Nolu Sokak No:9, Selcuklu/KONYA/TURKEY; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
30mm T-Nut Cutter for TCMT 1102 Indexable Inserts 4-Flute 55° Cutting Angle Internal Coolant 150mm - Teknik Makina
Benefit from the combination of reliable internal coolant, a 25 mm shank and a 30 mm cutting diameter for consistent T‑slot production; order the item directly via Metav Werkzeuge or consult our specialists for application advice. T-slot cutter for TCMT 1102 indexable inserts — 30 mm, internal coolant (Teknik Makina) T-slot cutter for precision machining of T‑slots and keyways, designed for industrial milling with TCMT 1102 indexable inserts. 30 mm diameter for robust T-slot cutting Internal coolant for improved tool life 25 mm shank for stable spindle clamping Four cutting edges for consistent material removal Increase machining uptime with coolant-through tool design The tool combines a 30 mm diameter cutting head with built‑in internal coolant, enabling uninterrupted evacuation of heat and chips at the cutting zone. This design reduces thermal stress on inserts and the machine spindle, translating into longer intervals between indexings and fewer process interruptions. For production environments that prioritise cycle stability and repeatable slot geometry, the coolant‑through capability supports higher feed consistency and improved surface finish compared with external coolant alone. The result is measurable productivity gains for repetitive T‑slot operations. Robust shank and insert interface for secure clamping Equipped with a 25 mm shank and a dedicated fastening design for TCMT 1102 indexable inserts, the cutter provides a rigid connection to the toolholder and a secure seat for the insert screw (Torx T8, M2.5 x 5.5). The cutter’s four cutting edges and a 55° cutting angle balance chip formation and cutting forces, promoting even wear across the insert and predictable tool life. The specified 50 mm cutting length on the shaft and total length of 150 mm support a range of slot depths while maintaining stability in chucks and collets. These mechanical attributes reduce vibration and enhance dimensional control in series production. Practical application guidance and supply reliability Designed and manufactured by Teknik Makina and stocked by Metav Werkzeuge, the cutter fits into standard production workflows where TCMT inserts are preferred. The tool’s specifications—compact mass (0.521 kg) and standard Torx drive—allow straightforward insert changes on the shop floor. For customers seeking supply continuity and clear procurement, Metav offers consolidated sourcing and expert consultation from Emmerich, ensuring that high‑precision tools arrive traceable and ready for installation. The combination of component robustness and logistical support helps to lower the overall cost of ownership through reduced downtime and predictable replenishment. Contact Metav Werkzeuge for tailored technical advice on Teknik Makina T‑slot cutters with internal coolant and to discuss suitable inserts and clamping options for specific applications. Technical Data Item: T-slot cutter for TCMT 1102 indexable inserts SKU: TKC168TM Manufacturer: Teknik Makina Label: 30mm T-Nut Fräser TCMT 1102 L150mm mit Innenkühlung eClass: 21180605 Facts Diameter: 30 mm Total length: 150 mm Shank diameter: 25 mm Cutting length (shaft): 50 mm Weight: 0.521 kg Cutting edges: 4 Cutting angle: 55° Torx key: T8 Torx screw: M2.5 x 5.5 Special features Internal coolant (coolant‑through) Compatible with TCMT 1102 indexable inserts Designed for stable spindle clamping Four cutting edges for even wear FAQ Which inserts are compatible with this cutter? The cutter is compatible with TCMT 1102 indexable inserts; the geometry and pocket are optimised for these insert types to ensure correct seating and chip control. Does the tool support coolant-through operation? Yes — this T‑slot cutter features internal coolant, enabling direct coolant delivery to the cutting zone for improved tool life and chip evacuation. What shank size and clamping are required for secure use? A 25 mm shank is specified; secure clamping in a matched collet or hydraulic chuck is recommended to maintain stability when using the TKC168TM cutter. How many cutting edges and what angle does the cutter use? The tool has four cutting edges and a 55° cutting angle, a combination that balances cutting force and chip formation for consistent T‑slot machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah. 422 Nolu Sokak No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
31mm Chamfer Cutter 45°/90° For TCMT 16T3 Inserts 16mm Shank 35mm Cutting Height - Teknik Makina
Take advantage of an indexable solution that combines quick insert changes, precise 45° and 90° chamfering and a robust 16 mm shank for stable machining — order the tool directly via Metav Werkzeuge or consult the team for application advice. Chamfer Mill S336TM — Indexable chamfer cutter, Ø31 mm, 45°/90° (Teknik Makina) A Chamfer Mill S336TM engineered for economical chamfering with replaceable carbide inserts, ideal for production use where consistent edge preparation is required Indexable inserts TCMT 16T3 Two cutting edges for smooth chamfers 45° and 90° chamfer angles Ø31 mm cutting diameter, 16 mm shank Faster chamfering with economical insert tooling The S336TM is designed around indexable inserts (compatible with TCMT 16T3) to reduce per-edge cost and limit downtime when compared with solid tools. The insert system enables rapid seat changes and predictable wear cycles, which translates into measurable productivity gains on repetitive jobs. With a Ø31 mm cutting diameter and two cutting edges, the tool balances material removal with surface finish, allowing clearer planning of cycle times and tool budgets. Rigidity and repeatability for routine production A solid 16 mm shank and a 35 mm cutting height provide the mechanical stability needed to maintain consistent chamfer geometry across batches. The combination of shaft stiffness and the tool’s overall length (100 mm) reduces vibration and helps deliver repeatable chamfer dimensions in serial production. This stability supports predictable process control and lowers scrap rates by ensuring each chamfer meets dimensional expectations. Practical maintenance and assembly on the shop floor The clamping system uses a Torx screw M3.5x8.5 secured with a T15 key, allowing straightforward insert replacement without specialised fixtures. Fewer spare tools are required thanks to replaceable carbide tips, which keeps inventory lean and tool management simple. For customers seeking application data or adaptation to specific machines, Metav Werkzeuge provides technical documentation and advice to align the tool’s performance with workshop conditions. Contact Metav Werkzeuge for tailored advice on Teknik Cutting Tools’ Chamfer Mill S336TM — rely on local stock and application expertise from Emmerich; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: S336TM Manufacturer: Teknik Makina Insert type: TCMT 16T3 Cutting diameter: 31 mm Shank diameter: 16 mm Total length: 100 mm Cutting height: 35 mm Number of cutting edges: 2 Chamfer angles: 45° / 90° Torx screw: M3,5x8,5 Torx key size: T15 Weight: 0.204 kg Facts Ø31 mm 16 mm shank 100 mm total length 35 mm cutting height 2 cutting edges 45° / 90° angles 0.204 kg Special features For indexable inserts TCMT 16T3 Two cutting edges Chamfer angles 45° and 90° Torx screw M3,5x8,5 (T15) FAQ Which inserts fit the chamfer mill S336TM? The S336TM is specified for TCMT 16T3 indexable inserts; these inserts are the intended fit for Teknik Makina’s chamfer cutter. What chamfer angles can be produced? This chamfer cutter offers fixed 45° and 90° geometries, enabling standard edge preparation and countersink-style chamfers where required. What are the shank and cutting diameter dimensions? The tool has a 16 mm shank and a Ø31 mm cutting diameter, providing a balance of rigidity and cutting capacity for common machining set-ups. How is the insert secured and replaced? Inserts are clamped using a Torx screw M3.5x8.5 tightened with a T15 key, allowing quick replacement and secure retention during machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
31mm Chamfer Cutter 60/120° For TCMT 16T3 Tips, 16mm Shank 35mm Cutting Height - Teknik Makina
Take advantage of the combination of precise chamfer geometry, a robust 16 mm shank and compatibility with standard indexable inserts for consistent results in series production — order the Chamfer cutter S339TM directly via Metav Werkzeuge or ask our consultants if needed. Chamfer cutter S339TM – indexable chamfering cutter, Ø31 mm, 16 mm shank (Teknik Makina) The Chamfer cutter S339TM is a compact indexable cutter designed for accurate chamfering on milling machines; it supports TCMT 16T3 inserts and offers selectable chamfer angles for versatile component finishing. Ø31 mm diameter, 2 cutting edges Shank ø16 mm for secure clamping 35 mm cutting height for deep chamfers Compatible with TCMT 16T3 indexable inserts Delivering precise chamfers with stable clamping The tool is built around a 16 mm shank that ensures secure clamping in standard toolholders, which reduces runout and contributes to repeatable edge quality. With a Ø31 mm cutting body and 2 cutting edges, the design focuses on balance between material removal and surface finish. The combination of diameter and shank dimension makes the cutter suitable for stable setups on vertical and horizontal milling machines, where vibration damping and concentricity are decisive for consistent chamfer geometry. Flexible chamfer angles for application variety Two chamfer geometries—60° and 120°—are available through the cutter's insert arrangement, enabling a choice between sharper and broader chamfers without changing the tool body. The 35 mm cutting height gives scope for deeper chamfers in fewer passes, improving cycle times. Using TCMT 16T3 indexable inserts standardises tool maintenance: worn inserts are replaced quickly, restoring tool performance with minimal downtime and predictable operating costs. Simple serviceability and low downtime The cutter uses a single clamping screw configuration (Torx screw M3.5x8.5 secured with T15) for insert retention, which simplifies changeover and reduces tool-change times on the shop floor. The indexable insert concept avoids grinding or rehoning operations and supports fast, reliable maintenance routines. The modest tool mass of 0.213 kg lowers inertia during spindle acceleration and deceleration, which can contribute to smoother machining cycles and reduced spindle load during frequent stops and starts. Why supply chain reliability matters for production Sourcing the cutter through an established partner brings operational advantages beyond the tool's geometry: central warehousing and a tested quality filter reduce the risk of inconsistent batches and delivery delays. Metav’s provision of technical information and stocked accessories supports planning and ensures the cutter is ready for immediate use in standard setups. Confidence in supply continuity is critical when replacing inserts or scaling production runs. Contact Metav Werkzeuge for tailored technical advice on integrating the Chamfer cutter S339TM into existing toolsets or to arrange a purchase via their Emmerich warehouse; phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: S339TM Manufacturer: Teknik Makina Product name: Chamfer cutter (Fasenfräser) eCl@ss: 21180806 ETIM: EC011860 Core data Diameter: 31 mm Shank diameter: 16 mm Cutting height: 35 mm Overall length: 100 mm Number of cutting edges: 2 Weight: 0.213 kg Chamfer angles: 60° / 120° Special features For indexable inserts: TCMT 16T3 Torx screw: M3.5x8.5 Torx key size: T15 Designed for quick insert replacement Two-angle chamfer capability FAQ What type of inserts does the cutter use? The Chamfer cutter S339TM accepts TCMT 16T3 indexable inserts, enabling rapid replacement and standardised insert sourcing. Which chamfer angles are available with this tool? The cutter provides chamfer geometries of 60° and 120°, allowing selection between narrow and wide chamfers without changing the tool body. What are the key dimensions to check for holder compatibility? Check the 16 mm shank diameter and the overall length of 100 mm when selecting a compatible toolholder for the S339TM. How many cutting edges does the tool have and what is the impact? The tool has 2 cutting edges, which balance material removal rate and surface finish while keeping the design compact for stable machining. Is specialised tooling required to change inserts? Insert changes require a Torx T15 key and the specified Torx screw M3.5x8.5, which simplifies maintenance on the shop floor. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm T-Nut Cutter 45° Indexable Inserts SPMG 0904, 25mm Shank 30mm Cutting Length - Teknik Makina
Take advantage of the combination of 45° cutting geometry, compatibility with SPMG 0904 indexable inserts and a 25 mm shank for stable, repeatable T-slot machining — a compact solution for production and workshop use. Order the T-slot milling cutter directly via Metav Werkzeuge or ask our consultants if needed. T-slot milling cutter – 32 mm diameter, 45° cutting angle (Teknik Makina) T-slot milling cutter for machining precise T-slots and grooves in industrial fixtures and machine tables 45° cutting angle for precise T-slots Accepts SPMG 0904 indexable inserts 25 mm shank for rigid clamping 32 mm diameter, 2 cutting edges Precision slotting with indexable inserts for consistent results The T-slot milling cutter combines a defined 45° cutting angle with compatibility for SPMG 0904 indexable inserts, delivering consistent slot geometry across series production. Using replaceable inserts reduces downtime compared with solid cutters: worn cutting edges are exchanged quickly, restoring original performance without regrinding. The insert system also enables controlled chip formation and predictable tool life, which supports higher throughput and reliable cycle-time planning in CNC and conventional machining environments. Rigid tool body and secure fixation for improved surface quality A substantial 25 mm shank and a 32 mm cutter diameter give the tool the stiffness required for stable operation, while the overall length of 150 mm and a 30 mm cutting length provide an accessible working envelope for typical T-slot depths. The cutter is secured with an M3.5x8.5 Torx screw tightened with a T15 key, ensuring repeatable clamping of the insert pocket. Reduced vibration from the rigid design improves surface finish and extends insert life, which contributes to lower per-part costs and fewer secondary operations. System compatibility designed for workshop productivity Designed to accept inserts from established manufacturers — notably Taegutec — the cutter integrates easily into existing tooling kits and spare-part strategies. With 2 cutting edges and a balanced geometry, the tool is suitable for repetitive T-slot production where uniformity is essential for assembly and fixture alignment. If additional technical details are required to match specific machines or workpieces, advisory support is available; Metav Werkzeuge combines broad stock depth with decades of metrology and tooling expertise to help select the right tool combination for the job. For reliable T-slot machining choose the Teknik Makina T-slot milling cutter — contact Metav Werkzeuge in Emmerich for specific application advice or spare-part guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S060TM Manufacturer: Teknik Makina Designation: T-slot milling cutter Facts Diameter: 32 mm Shank diameter: 25 mm Cutting length: 30 mm Overall length: 150 mm Number of cutting edges: 2 Cutting angle: 45° Weight: 0.589 kg Special features Suitable for insert: SPMG 0904 Compatible insert manufacturer: Taegutec Torx screw: M3.5x8.5 Torx key size: T15 FAQ Which inserts fit the cutter best? The cutter accepts SPMG 0904 indexable inserts; Taegutec inserts in this designation are compatible with the Teknik Makina T-slot milling cutter (SKU S060TM). How is the insert secured and which key is required? Inserts are secured with an M3.5x8.5 Torx screw; use a T15 key to achieve the specified clamping. What shank diameter is required for the holder? The cutter has a 25 mm shank, so machine holders or collets must accommodate a 25 mm shank diameter for secure clamping. Can the cutter be used on different machines? Yes — the tool is suitable for CNC milling machines and conventional mills where a 32 mm diameter T-slot cutter is required; machine spindle capability and holder rigidity should be checked to match speeds and feeds. How many cutting edges does the tool have and what is the benefit? The tool features 2 cutting edges, providing a predictable chip load and simplified insert replacement, which helps maintain consistent slot geometry over production runs. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm T-Nut Cutter for TCMT 16T3 Indexable Inserts L150mm Internal Cooling - Teknik Makina
Combining a 32 mm cutting diameter with internal coolant and compatibility with TCMT 16T3 indexable inserts delivers efficient chip control and consistent T-slot geometry; this improves uptime and reduces tool changes. Order the cutter directly via Metav Werkzeuge or consult our specialists for application-specific guidance. T-slot cutter for TCMT 16T3 — 32 mm, internal coolant (Teknik Makina) A T-slot cutter for TCMT 16T3 indexable inserts, engineered for precise T-slot machining in fixtures and workholding applications. 32 mm diameter for precise T-slots Internal coolant for improved chip evacuation Compatible with TCMT 16T3 indexable inserts 25 mm shank for stable clamping Enhanced cutting performance for precise T-slots The T-slot cutter TKC170TM combines a 32 mm diameter with a 25 mm shank and a 55° cutting angle to deliver stable, repeatable T-slot profiles. Two well-balanced cutting edges ensure even load distribution and reduced vibration, which supports consistent surface finish and dimensional fidelity. The design concentrates on material removal efficiency and process reliability, making it suitable for repetitive fixture work where tolerance adherence is essential. Optimised coolant routing reduces thermal load and wear Equipped with internal coolant, the tool channels coolant directly to the cutting zone to aid chip evacuation and reduce heat generation at the insert edge. This targeted cooling helps maintain cutting edge integrity and prolong tool life, particularly in continuous or high-feed operations. For workshops seeking measurable improvements in machining stability, the coolant routing translates into fewer unplanned stops and a steadier production flow. Secure insert clamping and straightforward service for fast changeovers Insert retention uses a T15 Torx key and an M3.5x8.5 fastening screw to secure TCMT 16T3 inserts reliably. The cutter’s 150 mm overall length and 50 mm cutting length provide sufficient reach while remaining compact enough for rigid clamping. Maintenance and insert replacement are straightforward, minimising downtime during routine service. Clear mechanical fixation supports repeatable seating and consistent cutting conditions. Purpose-built for fixtures, jigs and repetitive milling tasks At a manageable weight of 0.508 kg, the body balances rigidity with handling convenience, making the tool suitable for both production and repair tasks in workshop environments. With 2 cutting edges, the cutter offers a compromise between efficient chip removal and economical insert usage. Technical advice is available for adapting cutting parameters to specific materials and setups, ensuring the cutter delivers dependable results in regular T-slot milling operations. For reliable T-slot machining choose the Teknik Makina T-slot cutter TKC170TM and contact Metav Werkzeuge for tailored advice and fast delivery; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TKC170TM Manufacturer: Teknik Makina Product type: T-slot cutter Numbers / Core technical data Diameter: 32 mm Overall length: 150 mm Weight: 0.508 kg Shank diameter: 25 mm Cutting length: 50 mm Cutting edges: 2 Cutting angle: 55° Special features Internal coolant For TCMT 16T3 indexable inserts Torx key: T15 Torx screw: M3.5x8.5 eClass: 21180605 FAQ Which indexable inserts fit this cutter? The cutter is designed for TCMT 16T3 indexable inserts; TKC170TM accepts the TCMT 16T3 geometry for secure seating and efficient cutting. Does the cutter provide internal coolant? Yes, the TKC170TM features internal coolant, routed to the cutting zone to aid chip evacuation and reduce thermal load. What shank size is required for the holder? A 25 mm shank is specified for this cutter; ensure the toolholder accepts a 25 mm shank for proper clamping. How are inserts fastened to the cutter? Inserts are retained with a T15 Torx key and an M3.5x8.5 screw, providing secure and repeatable clamping for TCMT 16T3 inserts. What length and reach does the cutter offer? The tool has a 150 mm overall length with a 50 mm cutting length, offering good reach for typical fixture and workholding tasks. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm T-Slot Cutter CCMT 0602 Insert Compatible, 15mm Shank Cutting Ø 40mm Shank Length - Teknik Makina
Take advantage of a precision T‑slot cutter that combines replaceable CCMT indexable inserts, a robust 20 mm shank and a compact overall length for efficient setup and consistent production results; order directly via Metav Werkzeuge or ask our consultants for machining recommendations. T-Nut Cutter TKC102TM by Teknik Makina — 32 mm diameter, for indexable CCMT 0602 inserts The T-Nut Cutter TKC102TM is designed for accurate T‑slot machining on CNC milling machines and modular fixtures, offering a replaceable‑insert concept for economical series production. T-slot cutter »TKC102TM« by Teknik Makina Compatible with CCMT 0602 indexable inserts 32 mm cutting diameter, 4 flutes 20 mm shank diameter for secure clamping Consistent production from replaceable indexable inserts The replaceable indexable inserts system is the core benefit of this tool: CCMT 0602 inserts are used, so wear is managed by logistically simple plate changes rather than full‑tool replacement, reducing downtime and consumable costs. The insert geometry is chosen to deliver a precision slot profile with minimal vibration; users unfamiliar with indexable tooling will find that changing a seat of inserts is significantly quicker than re‑grinding solid cutters. This approach keeps tolerances stable across batches and makes surface finish reproducible without complex re‑setting procedures. Stable clamping and geometry for higher feed rates A 20 mm shank ensures secure clamping in standard holders and collets, improving concentricity and reducing runout during high‑feed operations. The body features 4 flutes matched to a 32 mm external diameter and a 40 mm cutting length, which together balance chip evacuation and engagement length to permit elevated material removal rates while maintaining tool life. The cutter’s 12 mm effective cutting height is engineered to suit typical T‑slot profiles; this geometry reduces deflection and allows for steady surface quality, which is particularly advantageous when machining longer runs or harder alloys. Quick insert changes and workshop practicality Assembly and maintenance are simplified: the insert is secured with a Torx screw M2.5x3.5 and standard Torx key T8, enabling fast, repeatable insert replacement without specialised tooling. The tool’s overall length of 100 mm and light weight (0.3 kg) make it straightforward to handle during set‑up and inspection. Supplied as an indexable cutter compatible with CCMT plates, the design supports predictable service life budgeting and straightforward inventory management — an attractive operational advantage for busy production shops and contract manufacturers alike. Contact Metav Werkzeuge today for tailored machining guidance or to arrange procurement of the Teknik Cutting Tools T‑slot cutter — expert advice and reliable supply direct from Emmerich. Technical Data Article number: TKC102TM Manufacturer: Teknik Cutting Tools Type: T-slot cutter Facts Diameter: 32 mm Number of flutes: 4 Overall length: 100 mm Shank diameter: 20 mm Cutting length: 40 mm Cutting height: 12 mm Weight: 0.3 kg Special features Compatible with CCMT 0602 indexable inserts Torx screw M2.5x3.5 for insert clamping Torx key size T8 Designed for CNC milling and fixture slotting FAQ How are inserts secured on this cutter? Insertion plates are fixed with a Torx screw M2.5x3.5; a T8 key is used for tightening and replacement on the TKC102TM. Which insert type is required for replacement? Replacement requires CCMT 0602 indexable inserts, chosen for their economy and repeatable cutting geometry in T‑slot profiles. What clamping size is recommended for stable operation? A 20 mm shank provides secure clamping in standard holders and collets, improving runout and enabling higher feed rates. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm T-Slot Cutter L65mm 3 Flute M12 Shank - Teknik Makina
Combine robust machining performance with straightforward tool integration: the 32 mm cutting diameter, secure M12 thread and compatibility with Korloy indexable inserts deliver reliable T-slot production and predictable cycle times. Order directly via Metav Werkzeuge or consult our specialists for specification support. T-slot cutter TKC266TM — 32 mm diameter, 65 mm overall length | Teknik Makina A T-slot cutter designed for precise machining of T-slots and grooves in production and workshop environments, suitable for use with indexable inserts. 32 mm cutting diameter 65 mm overall length Three cutting edges for smooth cuts Compatible with Korloy indexable inserts Consistent T-slot results for repetitive production The cutter achieves repeatable groove geometry thanks to its 32 mm diameter and three cutting edges, which distribute cutting forces and reduce vibration. The defined 2 mm cutting edge height supports stable insert seating and predictable chip flow, helping to maintain slot dimensions throughout long runs. This configuration reduces the need for rework and supports consistent part quality in serial milling tasks. Secure mounting and easy machine integration A robust M12 thread together with an 18 mm shank provides a compact, secure connection to the toolholder, assisting reliable torque transfer during plunge and slotting operations. The relatively light mass (0.108 kg) simplifies handling and tool changes while keeping spindle load modest. These features make integration into existing setups straightforward and minimise downtime during insert replacement or tool swaps. Practical compatibility and workshop benefits Designed for use with Korloy inserts, the cutter streamlines tooling logistics by using widely available indexable grades. The model is supplied under the designation TKC266TM by Teknik Makina, offering an industrial-grade option for workshops seeking repeatable T-slot machining without complex tool preparation. The compact overall length of 65 mm supports access in constrained fixtures while preserving rigidity for accurate slot profiles. For procurement or specification advice on Teknik Makina T-slot cutters such as the TKC266TM, contact Metav Werkzeuge for delivery options and technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: TKC266TM Product type: T-slot cutter Manufacturer: Teknik Makina Numbers / Core technical data Diameter: 32 mm Overall length: 65 mm Shank diameter: 18 mm Cutting edges: 3 Cutting edge height: 2 mm Thread: M12 Weight: 0.108 kg Special features / Compatibility Compatible with Korloy indexable inserts Label: 32 mm T-slot cutter L65 mm SKU: TKC266TM FAQ What is the cutting diameter of this T-slot cutter? The cutting diameter is 32 mm; the TKC266TM is specified for T-slot machining with a 65 mm overall length. Which inserts fit this cutter? This cutter is compatible with Korloy indexable inserts for straightforward insert replacement. How is the cutter mounted to the toolholder? The design uses an M12 thread and an 18 mm shank to secure the cutter for machining operations. How many cutting edges does it have and what is their height? The tool features three cutting edges with a cutting edge height of 2 mm. Who manufactures this cutter? The cutter is manufactured by Teknik Makina and sold under the SKU TKC266TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm T‑Slot Cutter 4 Flutes 33mm Cutting Length, 25mm Shank - Teknik Makina
Robust and precise machining for repeatable T‑groove production: the combination of a 32 mm cutting diameter, secure 25 mm shank and compatibility with standard CCMT 09T3 inserts delivers steady material removal and reduced downtime. Benefit from fast insert changes and reliable clamping for continuous workshop operation — order or request application advice via Metav Werkzeuge. T-slot cutter TKC103TM — indexable milling cutter, Ø 32 mm (Teknik Makina) A T-slot cutter TKC103TM engineered for accurate T‑groove and T‑nut milling on CNC and conventional milling heads; compatible with CCMT 09T3 indexable inserts for efficient production use. Ø 32 mm cutting diameter Shank Ø 25 mm for firm clamping Compatible with CCMT 09T3 inserts Four cutting edges for steady removal Precision T‑grooves with consistent results This indexable milling tool delivers repeatable T‑slot geometry by combining a clear cutting diameter with a balanced cutter body. The 32 mm diameter and the design for CCMT 09T3 inserts ensure that each pass removes material evenly, which reduces the need for rework and shortens cycle times. The cutter’s four cutting edges distribute cutting forces across multiple flutes, lowering vibration and improving surface finish. For production environments, this translates into predictable throughput and less tool handling between operations. Fast maintenance and secure clamping for uninterrupted workflow A stable connection between tool and spindle is essential for precise milling; the cutter’s 25 mm shank provides a solid clamping interface for common toolholders, improving rigidity during plunge and side cuts. Insert retention is handled with an M3.5x9 Torx screw, and a T15 key secures the carbide plates quickly and safely. The practical arrangement of screw and key speeds up insert changes and minimises machine downtime, allowing rapid restoration of cutting capacity after resharpening or replacement of inserts. The tool’s moderate mass (0.434 kg) helps to balance rigidity with manageable tool handling in the workshop. Built for production and workshop flexibility With an overall length of 100 mm and a compact cutting-shank arrangement, the cutter offers reach without excess overhang, making it suitable for typical T‑slot and T‑nut operations on milling machines and machining centres. Compatibility with widely available CCMT plates keeps tooling costs predictable and supports a range of grades for different workpiece materials. The design suits both batch production and jobbing environments where quick changeovers and consistent results matter. Applied correctly, the tool contributes to streamlined processes and reliable part quality across repeated runs. For supply, technical matching and reliable delivery of Teknik Makina cutting tools, contact Metav Werkzeuge in Emmerich by eMail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored advice and order handling Technical data Article number: TKC103TM Brand: Teknik Makina Product name: T-slot cutter Core specifications Diameter: 32 mm Shank diameter: 25 mm Cutting-shank diameter: 16 mm Cutting height: 14 mm Number of cutting edges: 4 Shank length (cutting): 33 mm Overall length: 100 mm Weight: 0.434 kg Features and compatibility Compatible with CCMT 09T3 inserts Insert screw: M3.5x9 Torx Torx key size: T15 Indexable milling cutter for T‑grooves Four-flute cutting geometry FAQ What inserts does this cutter use? The cutter is designed for CCMT 09T3 indexable inserts; those inserts are widely available in several grades to match different workpiece materials. How is the insert secured? Insert retention uses an M3.5x9 Torx screw; a T15 key is required to tighten or loosen the screw for replacement. Which shank diameter is required for the toolholder? The cutter has a 25 mm shank diameter and should be mounted in a compatible collet or holder that provides sufficient clamping length for rigidity. What applications suit this milling cutter? This tool is intended for producing T‑slots and T‑nuts in general machining applications where indexable insert solutions are preferred for cost efficiency and quick servicing. Is the cutter suitable for automated production environments? Yes, the cutter’s stable geometry, four cutting edges and standard insert compatibility make it suitable for CNC production runs that require repeatability and efficient tool changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
33mm T-Nut Cutter for CCMT 09T3 Indexable Inserts 135mm Overall Length with Internal Coolant - Teknik Makina
Take advantage of the combination of compatibility with CCMT 09T3 indexable inserts, internal coolant and a robust 32 mm shank to maintain stable production and minimise rework; order directly via Metav Werkzeuge or consult our technical team for application-specific guidance. T-Nut Fräser — 33 mm T‑slot cutter with internal coolant by Teknik Makina The T-Nut Fräser is a precision T‑slot cutter designed for machining accurate T‑slots using CCMT 09T3 indexable inserts in CNC milling and fixture manufacture. *33 mm diameter for medium‑sized T-slots *Internal coolant for improved chip evacuation *32 mm robust shank for stable clamping *Compatible with CCMT 09T3 indexable inserts Delivering repeatable slot geometry for reliable assembly A stable toolholder and consistent cutter geometry reduce corrective machining and assembly delays. The combination of a 32 mm shank and a well‑balanced head ensures low runout and consistent engagement, which translates into better tolerance control. Fitted with CCMT 09T3 indexable inserts, the cutter offers predictable cutting behaviour and simple insert changes, enabling straightforward restoration of cutting performance without complex regrinding procedures. Coolant‑through design that improves tool life and process uptime The integrated internal coolant channel directs cutting fluid precisely to the cutting zone, aiding chip evacuation and reducing thermal load on the insert edges. This targeted cooling lowers flank wear and extends the useful life of cutting edges, while also supporting higher metal removal rates where process conditions allow. Using coolant effectively reduces built‑up edge and improves surface finish, helping to keep machining cycles consistent and downtime to a minimum. Modular maintenance and secure clamping for efficient production With only two cutting edges and a simple Torx T15 fastening system (screw M3.5×8.5), insert replacement is rapid and repeatable, decreasing tool change time on the shop floor. The tool’s overall design, including a 135 mm overall length and a dedicated 65 mm cutting length, suits inline tool management and inventory control. The model SKU TKC160TM is supplied by Teknik Makina and integrates smoothly into modular tooling strategies, supporting a predictable spare‑parts approach and controlled tooling costs. Discuss application requirements with Metav Werkzeuge for an optimised tool set‑up or request tailored technical advice on Teknik Cutting Tools' T‑slot cutters like the TKC160TM by contacting Metav Werkzeuge directly Technical data SKU: TKC160TM Product type: T-slot cutter Brand: Teknik Makina Label: 33mm T-Nut Fräser CCMT 09T3 L135mm mit Innenkühlung Facts Diameter: 33 mm Overall length: 135 mm Weight: 0.678 kg Shank diameter: 32 mm Cutting length: 65 mm Cutting edges: 2 Special features Internal coolant Compatible with CCMT 09T3 indexable inserts Torx key T15 Torx screw M3.5×8.5 FAQ Which inserts are compatible with this cutter? The cutter accepts CCMT 09T3 indexable inserts; the modular design facilitates fast insert replacement and consistent cutting geometry. Does the tool support coolant‑through operation? Yes, the tool features internal coolant which directs fluid to the cutting zone for improved chip evacuation and tool life. What shank size is required for the holder? The tool has a 32 mm shank, designed for robust clamping in standard heavy‑duty holders to ensure minimal runout. How are the inserts secured and replaced? Inserts are fixed using a Torx T15 screw (M3.5×8.5), allowing quick and repeatable replacement with common workshop tools. What is the product SKU for ordering or stock control? The item is listed as TKC160TM, which identifies the 33 mm T‑slot cutter with internal coolant from Teknik Makina Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
33mm T-Slot Cutter For CCMT 09T3 Indexable Inserts With Internal Coolant, 180mm Total Length - Teknik Makina
Take advantage of a robust combination of 33 mm cutting diameter, internal coolant and a firm 32 mm shank to achieve consistent T-slot quality and reduced tooling costs; order this cutter via Metav Werkzeuge or consult our specialists for tailored machining recommendations. T-slot cutter TKC162TM — 33 mm diameter, internal coolant, for CCMT 09T3 indexable inserts The T-slot cutter TKC162TM is a CNC milling tool designed for machining precise T-slots using CCMT 09T3 indexable inserts, offering stable clamping and reliable coolant delivery for longer tool life 33 mm diameter for deep T-slots Internal coolant for improved chip evacuation Compatible with CCMT 09T3 indexable inserts 32 mm shank for stable clamping Consistent slot geometry through replaceable inserts and sturdy design The cutter combines a 33 mm diameter with a geometry optimised for T-slot profiles, enabling stable material removal with minimal rework. By accepting CCMT 09T3 indexable inserts, the milling tool allows fast insert changes and predictable cutting performance, which reduces downtime and lowers per-part tooling cost. The use of replaceable carbide inserts means edge quality can be restored without regrinding the body, translating into continuous production and repeatable slot dimensions. Improved cooling and chip control for longer cutting intervals Built-in internal coolant supplies cutting fluid directly to the insert area, supporting heat dissipation and helping to clear chips from the slot cavity. This targeted coolant feed reduces thermal loading on the cutting edge and improves surface finish, particularly in deeper or narrow T-slots. Better chip evacuation also lowers the risk of recutting swarf, enhancing tool life and preserving dimensional accuracy over extended runs. Secure clamping and straightforward maintenance for efficient setups A 32 mm shank and a total length of 180 mm provide the rigidity needed for stable milling, while a 65 mm cutting length offers the reach required for common T-slot depths. The assembly uses a T15 Torx key and M3.5x8.5 Torx screws, enabling quick insert changes and secure fixation. With two cutting edges per head, the tool balances material removal with smoothness of cut, making it suitable for workshop and production contexts where consistent results and straightforward serviceability matter Contact Metav Werkzeuge for an expert assessment of machining parameters or to arrange supply of the Teknik Makina T-slot cutter equipped with internal coolant; eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 Technical data SKU: TKC162TM Manufacturer: Teknik Makina Data Diameter: 33 mm Total length: 180 mm Shank diameter: 32 mm Cutting length (shaft): 65 mm Number of cutting edges: 2 Weight: 0.947 kg Special features For inserts: CCMT 09T3 Inner cooling: Yes Torx key: T15 Torx screw: M3.5x8.5 FAQ What insert type is required for this cutter? The cutter is designed for CCMT 09T3 indexable inserts, which provide economical replacement and consistent cutting geometry for T-slot milling. Is the cutter suitable for deep T-slots in production environments? Yes, the combination of a 33 mm diameter, a 65 mm cutting length and internal coolant makes the tool appropriate for deeper T-slot operations in a production setting. How is coolant delivered to the cutting edge? Coolant is supplied through the tool body via internal coolant, directing fluid to the insert seat to aid heat control and chip evacuation. What shank size is required for secure clamping? A 32 mm shank ensures stable clamping in standard toolholders and helps reduce vibration during milling cycles. Which fastener is used to secure the inserts? Inserts are fixed with M3.5x8.5 Torx screws, tightened using a T15 Torx key for reliable and repeatable fixation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
34mm Chamfer Cutter 20mm Shank 40mm Cutting Height 30°/60° For TCMT 16T3 Inserts - Teknik Makina
Take advantage of a compact, indexable-insert solution that combines high repeatability, straightforward maintenance and efficient chip control; the measurable benefits are reduced set-up time and consistent chamfer quality. Order the chamfer cutter directly via Metav Werkzeuge or contact the consultants for application advice. Chamfer cutter S345TM – indexable-insert chamfering cutter, Ø 34 mm (Teknik Makina) Chamfer cutter S345TM is a robust indexable-insert tool designed for precise chamfering operations in machining centres and milling machines, suitable for use with standard TCMT 16T3 inserts. Ø 34 mm cutting diameter for broad edges Compatible with TCMT 16T3 indexable inserts 20 mm cylindrical shank for standard holders 30° and 60° chamfer angles for versatile chamfering Consistent chamfer quality with indexable inserts The indexable design ensures repeatable chamfer geometry and fast recovery time after insert changes. With a 34 mm nominal diameter and 40 mm cutting height, the cutter delivers a stable machining platform for chamfers and deburring operations. The use of TCMT 16T3 inserts provides straightforward tool management: worn inserts are replaced rather than re-sharpened, reducing downtime and keeping the production line moving. This configuration supports efficiency improvements in batch production where reproducibility is essential. Reduced set-up complexity and secure clamping A 20 mm shank permits secure mounting in standard collet chucks and toolholders, while the supplied M3.5×8.5 Torx screw (Torx key T15) secures the insert reliably under cutting loads. The double-angled design (available 30° / 60°) enables the selection of the most suitable chamfer geometry without multiple tools, saving tool-change time and simplifying tool inventory. The cutter’s modest weight (0.307 kg) and balanced construction minimise spindle wear and support stable surface finishes. Designed for workshop integration and predictable throughput The modular indexable-insert concept aligns with lean workshop processes: predictable tool life, fewer regrinds and quicker interventions at the machine. The cutter’s compatible insert size and common Torx fastener mean replacement parts are widely available, aiding uninterrupted production flow. For procurement managers and workshop supervisors this tool represents a pragmatic choice where uptime and standardisation across multiple machines are priorities, rather than exotic single-use solutions. Contact Metav Werkzeuge today to discuss how the Teknik Makina Chamfer Cutter S345TM fits into existing tool sets and to arrange delivery from Emmerich; Metav Werkzeuge’s consultants can advise on holder compatibility and insert selection Technical data Article number: S345TM Brand: Teknik Makina Insert type: TCMT 16T3 Core dimensions Cutting diameter: 34 mm Shank diameter: 20 mm Cutting height: 40 mm Overall length: 100 mm Number of cutting edges: 2 Weight: 0.307 kg Features & compatibility Chamfer angles: 30° and 60° Torx screw: M3.5x8.5 Torx key size: T15 Indexable-insert system FAQ Which inserts fit this chamfer cutter? The chamfer cutter S345TM from Teknik Makina is designed for TCMT 16T3 indexable inserts. What shank diameter is required for mounting? The tool has a 20 mm cylindrical shank, compatible with standard collet chucks and holders that accept a 20 mm shank. What chamfer angles are available with this cutter? This cutter is configured for both 30° and 60° chamfering applications, enabling flexible edge geometries. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Chamfer Cutter For Indexable Inserts 45°/90° 35mm Cut Height 35mm, 20mm Shank - Teknik Makina
Take advantage of a robust combination of precise chamfering, fast insert changes and a compact 20 mm shank for stable mounting; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Chamfer cutter S338TM — 35 mm diameter, 20 mm shank (Teknik Makina) A Chamfer cutter S338TM designed for accurate 45° and 90° chamfering in machining operations, compatible with TCMT 16T3 indexable inserts for efficient edge preparation 35 mm cutting diameter 20 mm shank diameter Compatible with TCMT 16T3 inserts 45° and 90° chamfer angles Accurate chamfers with predictable results The S338TM delivers consistent chamfer geometry thanks to its 35 mm nominal diameter and a cutting height of 35 mm, which together enable stable material engagement on flat workpieces. With two cutting edges, the cutter balances material removal and surface finish, reducing the need for secondary operations. The combination of a solid 20 mm shank and a compact overall length of 100 mm ensures low run-out when mounted in standard toolholders, promoting repeatable angles and reduced scrap rates. Where process reliability matters, choosing a cutter with defined dimensions simplifies setup routines and quality documentation. Rapid insert changes and short machine downtime This chamfering solution accepts TCMT 16T3 indexable inserts, enabling quick replacement without complex regrinding. A single Torx fixing (M3.5x8.5) secured with a T15 key keeps clamping straightforward and repeatable; the simple fastening reduces changeover time and lowers the risk of incorrect seating. Using standard indexable inserts allows stock consolidation and predictable cutting performance across batches. For production environments, the result is improved throughput and easier inventory management, as inserts can be rotated or replaced independently from the cutter body. Versatile angles, robust handling and predictable lifecycle Designed to produce both 45° and 90° chamfers, the cutter suits deburring, edge preparation and bevel creation across a range of common tasks. The two-flute configuration contributes to balanced cutting forces and a stable finish on aluminium and steel workpieces in typical workshop applications. At 0.324 kg, the tool body is light enough for safe handling yet substantial enough to resist chatter in regular milling setups. The modular nature of the design—indexable inserts and standard fixing—supports maintenance workflows and keeps toolholding costs manageable over the tool’s lifetime. Contact Metav Werkzeuge for tailored application advice and to source the S338TM chamfer cutter from our Emmerich site — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: S338TM Manufacturer: Teknik Makina Diameter: 35 mm Shank diameter: 20 mm Cutting height: 35 mm Overall length: 100 mm Weight: 0.324 kg Cutting edges: 2 Chamfer angles: 45° / 90° Torx screw: M3.5x8.5 Torx key: T15 Features For indexable inserts: TCMT 16T3 Suitable for 45° and 90° chamfers Two-flute cutter for balanced cutting forces Compact 20 mm shank for standard toolholders FAQ What chamfer angles can be produced with this cutter? The cutter supports both 45° and 90° chamfers; the geometry permits reliable edge creation at these standard angles for deburring and bevel preparation. Which inserts are compatible with the cutter? The tool accepts TCMT 16T3 indexable inserts, which are widely available and easy to replace to restore cutting performance. What are the mounting dimensions for the cutter? The S338TM features a 20 mm shank and an overall length of 100 mm, making it compatible with standard collet and holder systems that accept a 20 mm shank. How many cutting edges does the tool have and what is the effect on finish? The cutter has two cutting edges, offering a compromise between material removal rate and surface finish, resulting in stable cutting forces and good edge quality. Is the fixing hardware included and what tool is required? Fixing is achieved with a Torx screw M3.5x8.5; a T15 key is used for secure and repeatable clamping of the insert. Teknik Makina: Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm T-Nut Cutter for DCMT 11T3 Indexable Inserts L120mm, 60° Cutting Angle - Teknik Makina
Benefit from a compact T-slot milling solution that combines a 35 mm cutting diameter, compatibility with DCMT 11T3 indexable inserts and a rigid 20 mm shank for stable, repeatable results. Order via Metav Werkzeuge or request tailored application advice from our consultants for swift integration into production. T-Nut Cutter TKC248TM — 35 mm diameter, for DCMT 11T3 indexable inserts by Teknik Makina The T-Nut Cutter for DCMT 11T3 indexable inserts is engineered for accurate T-slot milling in workshop and light industrial settings, offering a balance of productivity and easy serviceability. 35 mm cutting diameter Compatible with DCMT 11T3 inserts 20 mm shank for rigid clamping 120 mm overall length for deeper slots Consistent material removal with replaceable inserts The 35 mm cutter diameter and the use of DCMT 11T3 indexable inserts deliver a predictable cutting geometry that supports uniform chip evacuation and surface finish. With two cutting edges and a 60° cutting angle, the tool reduces peak forces per tooth, which improves stability during slot formation. The replaceable insert system lowers per-cutting-edge cost and shortens downtime when an edge is spent, making the tool a rational choice where repeatable slot quality and economical maintenance matter. Secure clamping and straightforward insert replacement A 20 mm shank dimension ensures secure clamping in standard toolholders, reducing vibration and improving run-out behaviour. The cutter’s 120 mm overall length provides reach for deeper T-slots while maintaining rigidity. Insert retention is achieved via an M3.5x8.5 Torx screw; servicing requires a T15 Torx key for reliable torque and repeatable seating. These design aspects combine to minimise setup time and contribute directly to stable cycle times on the shop floor. Flexible tool strategy through insert selection Rather than committing to a single dedicated geometry, the indexable insert concept allows selection of insert grades and coatings matched to the workpiece material and cutting conditions. This flexibility means the milling head can be adapted from roughing to finishing tasks simply by changing the insert grade or geometry, supporting both efficiency gains and cost control. The modular approach enables workshops to plan tooling inventories pragmatically and to react quickly to different production demands. Practical handling and workshop guidance With a compact mass of 0.28 kg and a 30 mm cutting-head length, the cutter is simple to handle and integrates easily into manual and automated tool-change routines. The twin cutting-edge design spreads load across two surfaces, improving cutter life when compared to high-tooth-count alternatives in similar applications. Regular checks of the Torx screw seating and correct mounting torque are advised to secure the insert reliably; keeping a small stock of spare DCMT 11T3 inserts and a T15 key on the bench reduces unplanned stops and supports continuous operation. For application advice or to request a quotation for the Teknik Makina TKC248TM, contact Metav Werkzeuge GmbH in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com for tailored support and rapid delivery. Technical data SKU: TKC248TM Article: 35 mm T-Nut cutter for DCMT 11T3 indexable inserts Manufacturer: Teknik Makina EClass: 21180605 Facts Diameter: 35 mm Overall length: 120 mm Shank diameter: 20 mm Cutting length: 30 mm Number of cutting edges: 2 Cutting angle: 60° Weight: 0.28 kg Torx key: T15 Torx screw: M3.5x8.5 Design & features Compatible inserts: DCMT 11T3 Indexable insert system Replaceable cutting edges Rigid shank for vibration control FAQ Which insert type is required for this cutter? The cutter uses DCMT 11T3 indexable inserts; the TKC248TM head accepts that specific insert shape and seat geometry for correct positioning. What are the key dimensions for planning a tool set-up? The TKC248TM provides a 35 mm cutting diameter, 120 mm overall length and a 30 mm cutting-head length, with a 20 mm shank for holder compatibility. How are the inserts secured and serviced? Inserts are retained with an M3.5x8.5 Torx screw; servicing requires a T15 Torx key to achieve reliable clamping and repeatable assembly. How many cutting edges does the cutter have and what is the angle? The tool features two cutting edges and a 60° cutting angle, which balances chip formation and cutting force distribution. What maintenance is recommended to preserve cutting performance? Routine checks of insert seating and screw torque, combined with timely replacement of worn DCMT 11T3 inserts, will preserve surface quality and prolong tool life. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm T-Nut Cutter For MGMN 200 Indexable Inserts L170mm, 20mm Shank - Teknik Makina
Take advantage of precise T-slot production with a 35 mm cutting diameter and compatibility with MGMN 200 indexable inserts, combined with a stable 20 mm shank for reliable clamping and repeatable results. Order the tool via Metav Werkzeuge or contact our consultants for application advice. T-slot milling cutter TKC296TM by Teknik Makina — 35 mm, L170 mm The T-slot milling cutter TKC296TM is designed for efficient machining of T-slots and T-nuts using MGMN 200 indexable inserts, offering a robust solution for fixture and table machining in milling centres. 35 mm cutting diameter Compatible with MGMN 200 indexable inserts 170 mm overall length for deep slots 20 mm shank with simple Allen clamp Accurate slot geometry for consistent assembly The cutter delivers a repeatable slot profile by combining a 35 mm nominal diameter with precisely positioned cutting edges. Using MGMN 200 indexable inserts means the effective cutting geometry is determined by the insert seat and clamping, so each replacement restores original tolerances quickly. This setup reduces scrap and rework, improving first-pass yield. For operations that demand consistent fitment of T-nuts, the rigid 20 mm shank ensures minimal deflection and steadier tool life, supporting reliable production runs. Economical tooling strategy with modular inserts By accepting standard MGMN 200 inserts produced by Korloy, the milling tool minimises overall tooling cost through replaceable cutting tips rather than full-head replacement. The cutter’s L170 mm overall length allows access to deeper slots without compromising rigidity. Such modularity shortens downtime during service intervals: worn inserts can be swapped in minutes, restoring cutting performance and maintaining throughput. This approach supports a predictable cost-per-slot calculation and sensible inventory management for production shops. Fast set-up and predictable maintenance routines Tool change and clamping are straightforward: insert fixing and the cutter body are serviced with a 6 mm Allen key for consistent torque and secure seating. Clear accessibility of the clamping screws simplifies routine checks and reduces set-up time at the machine spindle. With only two cutting edges and defined cutting-edge height, monitoring wear becomes easier and replacement intervals more predictable. The result is less unscheduled maintenance and more machine availability for productive machining cycles. Suited to fixture production and machine-table work This cutter is aimed at workshop applications where accurate T-slots are needed for clamping and assembly, such as fixture fabrication and machine-table refurbishment. The tool’s geometry and indexable concept provide a controlled approach to slot finishing: the insert profile dictates surface quality and dimensional stability, while the solid cutter body maintains alignment. For engineers planning production batches that require identical slot dimensions, this milling solution offers a stable, serviceable option that integrates with common insert stocking practices. For reliable T-slot production, request the Teknik Makina TKC296TM through Metav Werkzeuge — our specialists will advise on insert choice and application parameters; contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations Technical Data Article number: TKC296TM Label: 35mm T-Nut Fräser MGMN 200 L170mm Product type: T-slot milling cutter Manufacturer: Teknik Makina ECLASS: 21180605 Facts Diameter: 35 mm Overall length: 170 mm Shank diameter: 20 mm Cutting edges: 2 Cutting-edge height: 2 mm Special features For MGMN 200 indexable inserts Compatible insert manufacturer: Korloy Hex key: 6 mm Allen SKU: TKC296TM FAQ What insert type does this T-slot cutter use? The cutter accepts MGMN 200 indexable inserts; the TKC296TM is designed around that insert family for precise slot profiles. How is the cutter clamped in the spindle? The TKC296TM features a 20 mm shank for secure clamping in standard toolholders; final seating stability depends on correct holder selection and spindle setup. How are worn cutting edges replaced? Worn tips are exchanged individually: loosen the clamping screw with a 6 mm Allen key, replace the insert, and retorque to the specified setting to restore tool geometry. Is this tool suitable for deep T-slots? The cutter’s 170 mm overall length gives access to deeper slots than short cutters while maintaining adequate rigidity for typical fixture work. Can different insert grades be used with this cutter? Yes — as long as inserts conform to the MGMN 200 form and seat dimensions (Korloy and other manufacturers), different grades can be selected to match material and cutting conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm T-Nut Cutter for MGMN 200 Indexable Inserts L65mm, M16 Thread - Teknik Makina
Take advantage of the combination of precise T-slot geometry, straightforward insert replacement and secure M16 mounting for reliable process stability. Order the cutter through Metav Werkzeuge for a streamlined supply chain and expert procurement support. T-slot cutter TKC276TM – 35 mm, for MGMN 200 indexable inserts (Teknik Makina) The T-slot cutter TKC276TM is a purpose-built milling tool for producing accurate T-slots with MGMN 200 indexable inserts, designed for integration into standard toolholders and high-repeatability production setups. 35 mm cutting diameter for deep T-slots Compatible with MGMN 200 indexable inserts M16 thread for secure attachment to toolholders 25 mm shank diameter for stable clamping Consistent slot geometry for assembly-ready parts The TKC276TM delivers repeatable slot dimensions by combining a stable 25 mm shank with a 35 mm cutting diameter and 2 cutting edges. Using MGMN 200 indexable inserts ensures predictable wear behaviour: once an insert is spent, it is replaced without regrinding, which reduces downtime and keeps cycle times steady. The specified 2 mm cutting edge height provides controlled chip evacuation in many standard T-slot profiles, helping to minimise secondary finishing and ensuring assemblies fit without additional machining. Robust mounting and quick setup for production use Designed for reliable repetition in workshop and industrial environments, the tool features an M16 thread for secure fixation and a compact 65 mm overall length that supports rigidity in the machining zone. The modest mass (0.128 kg) contributes to improved dynamic balance at moderate spindle speeds, while the 6 mm hex interface simplifies clamping operations during tool changes. These attributes combine to lower the risk of chatter and to support consistent surface quality, making the cutter a practical choice for batch production where uptime and predictability are priorities. Broad compatibility and predictable supply chain integration Compatibility with Korloy-type inserts and the standard MGMN 200 geometry allows seamless adoption in existing tooling systems and simplifies spare-part stocking. The tool’s configuration supports common toolholders and cutter blocks used in milling centres, which reduces the need for special adapters. Sourcing via Metav Werkzeuge leverages their European distribution base and quality filter in Emmerich, providing reliable inventory and documentation for procurement departments that require traceability and steady supply. Discuss procurement options for the Teknik Makina T-slot cutter with Metav Werkzeuge for tailored delivery and technical advice — contact info@metav-werkzeuge.com or call +49 2822 7131930 to arrange a specification review and supply plan Technical Data SKU: TKC276TM Product type: T-slot cutter Manufacturer: Teknik Makina Facts Diameter: 35 mm Shank diameter: 25 mm Overall length: 65 mm Weight: 0.128 kg Thread: M16 Cutting edges: 2 Cutting edge height: 2 mm Special features Suitable for indexable inserts: MGMN 200 Compatible insert manufacturer: Korloy Label: 35mm T-slot cutter MGMN 200 L65mm Allen key size: 6 mm FAQ What insert geometry is required for this cutter? The cutter accepts MGMN 200 indexable inserts; this geometry is specified for the TKC276TM and ensures correct seating and chip formation. Is the tool compatible with Korloy inserts? Yes, the TKC276TM is compatible with Korloy inserts matching the MGMN 200 profile. What shank and thread dimensions does the cutter use? The tool has a 25 mm shank and an M16 thread, providing a robust connection to common toolholders. How many cutting edges does the cutter have and what is their height? The cutter is manufactured with 2 cutting edges and a cutting edge height of 2 mm, optimised for standard T-slot profiles. What is the overall length and mass of the cutter? The TKC276TM measures 65 mm overall and weighs 0.128 kg, supporting stable machining dynamics. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Reduce downtime with reliable internal-coolant t-slot cutters
A t-slot cutter is engineered to produce the wider, undercut section of a T-shaped slot commonly used in machine tables, workholding plates and industrial fixtures, while its shank runs through a previously made, narrower guide groove. Where external machine nozzles spray coolant from outside, machining of enclosed T-slots can leave the cutting edges starved of lubricant and the chips trapped; this increases heat, tool wear and the risk of sudden breakage. T-slot cutters with internal coolant avoid these issues by routing cooling fluid through deep shaft channels directly to the cutting edges.
How the tool works and where it is indispensable
The cutter is designed so that the enclosed cutting zone receives coolant under pressure via internal bores, which flush chips out of the narrow, enclosed cavity and remove process heat at the hidden engagement point. This technical design is especially necessary for t-slot milling operations in heavy-duty clamping plates, machine tables and fixtures where the tool is largely surrounded by material and external coolant cannot reach the cutting edges reliably.
Key operational benefits you can expect
- improved tool life through targeted cooling at the cutting edge
- consistent chip evacuation thanks to high-pressure internal coolant flow
- reduced risk of tool breakage by avoiding chip jamming and thermal overload
- better dimensional accuracy because heat and swarf are controlled at the source
- fewer rejects and less rework, increasing throughput in production
Metav as your practical partner for procurement and advice
Metav acts as a precision partner that makes high-accuracy tooling accessible for workshops and industry. From our Emmerich base we combine decades of expertise with a broad range of solutions, supported by over 48,000 customers and more than 250,000 products. For buyers seeking reliable supply and pragmatic technical guidance, Metav provides straightforward advice on selecting the right t-slot cutter or t-nut cutter and can clarify compatibility with existing setups.
FAQ
What is the main advantage of a t-slot cutter with internal coolant compared with external cooling?
A t-slot cutter with internal coolant delivers the coolant directly to the cutting edges through internal bores and channels, which is essential because the cutter works deeply and is largely enclosed by material; this prevents the coolant starvation and chip entrapment that commonly occur when external machine nozzles are used.
In which situations is a t-slot cutter absolutely required?
t-slot cutters are required for milling the undercut portion of T-shaped slots in machine tables, workholding plates and industrial fixtures where reliable chip evacuation and heat removal at the hidden engagement point are critical to prevent tool failure.
How does internal coolant affect chip removal and tool safety?
Internal coolant provides a strong flushing action that carries chips out of the narrow cavity, preventing chip jamming, avoiding overcutting on residual swarf and significantly reducing the likelihood of sudden tool breakage due to overload.
Can Metav advise on choosing the right t-slot milling cutter for a specific clamping system?
Yes. Metav’s technical team can advise on selecting the appropriate t-slot cutter or t-nut cutter for your machine table or fixture configuration and explain how internal coolant channels and shank guidance will interact with your existing guide groove.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com