Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
165mm Setting Ring Form C Hardened Gauge Steel DIN 2250/DIN 286 JS 3 - Metav IndustryLine
Take advantage of the combination of hardened, lapped gauge steel, precise DIN 2250 / DIN 286 JS 3 tolerance and the stable 165 mm diameter to secure reproducible measurement results. Order the master ring gauge directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Setting ring gauge M313.165 — 165 mm master ring gauge, hardened and lapped (Metav IndustryLine) The Setting ring gauge M313.165 serves as a durable, traceable master for internal dimensional control in production and inspection environments. Hardened and lapped gauge steel DIN 2250 / DIN 286, tolerance JS 3 Form C profile 165 mm nominal diameter Accurate master standard for inline quality control The ring is manufactured from hardened and lapped gauge steel, delivering a wear-resistant contact surface that preserves the reference dimension over repeated use. Compliance with DIN 2250 and DIN 286 at tolerance JS 3 ensures the ring functions as a reliable master for setting internal gauges and verifying bore sizes, reducing measurement uncertainty and speeding up inspection cycles. As a stable calibration artefact, it supports consistent pass/fail decisions on the production line and helps to lower scrap rates. Stable geometry for repeatable measurements The Form C profile and substantial mass contribute to geometrical stability during handling and measurement, so readings remain repeatable across multiple operators and shifts. The lapped finish minimises surface irregularities that can affect contact geometry, while the overall construction resists deformation. This stability translates into fewer adjustments during routine checks and a more predictable process capability for medium and long production runs. Designed for practical workshop integration With its 165 mm nominal diameter and robust construction, the master ring integrates readily into inspection benches and gauge sets. The ring functions as a fixed reference for calibrating internal measuring equipment and can be used alongside plug and dial gauges to build a traceable control chain. For specialised setups or large-volume applications, the ring’s conformity to recognised standards simplifies documentation and audit processes, supporting quality management systems without adding administrative complexity. For a robust, traceable master from Metav IndustryLine, request the M313.165 via Metav Werkzeuge — our Emmerich team can advise on delivery options and suitable pairing with existing gauge equipment through Metav Werkzeuge. Technical data Article number: M313.165 GTIN: 4054469121192 Eclass: 21170104 Manufacturer: Metav IndustryLine Diameter: 165 mm Weight: 6.6 kg Tariff number: 90173000 Material: gauge steel, hardened and lapped Standards: DIN 2250 and DIN 286, tolerance JS 3 Form: Form C profile FAQ What tolerance does this ring meet? The setting ring gauge M313.165 meets DIN 2250 and DIN 286 with tolerance JS 3, providing a clearly defined manufacturing and inspection limit. What material is the master ring made from? The M313.165 is manufactured from hardened and lapped gauge steel, chosen for dimensional stability and resistance to wear. For which applications is this ring intended? This master ring is intended as a traceable reference for internal gauge calibration, bore verification and workshop inspection routines in production and metrology stations. How should the ring be handled to maintain accuracy? Handle the master ring with clean gloves, store it in a dry, dust-free environment and avoid direct impacts; regular visual inspection and controlled storage prolong the lapped surface condition. Can the M313.165 be used as a portable reference? Its robust design and mass allow controlled use as a shop-floor master; however, transport should be performed in suitable packaging to avoid surface damage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16–17mm Gauge Pin Set 101pcs 0.01mm Step With Pin Holder In Plastic Case - Metav IndustryLine
Take advantage of the combination of 0.01 mm graduations, robust special steel construction and a complete 16.0–17.0 mm range for dependable inspection cycles. Order the gauge pin set directly via Metav Werkzeuge or consult our specialists for application-specific advice. M318.586 Gauge Pin Set — 16.0–17.0 mm, 0.01 mm increments (Metav IndustryLine) The M318.586 gauge pin set is a precision inspection kit designed for accurate bore and hole verification in the 16.0–17.0 mm range. 101 precision gauge pins 16.00–17.00 mm 0.01 mm step for fine adjustment Hardened special steel construction Includes removable pin holder Accurate clearance and fit verification for serial inspection The set delivers a continuous range from 16.0 to 17.0 mm with 0.01 mm steps, enabling fine-grained assessment of hole diameters and fit tolerances. The close graduations support repeatable pass/fail decisions during incoming inspection and production sampling; combined with the documented accuracy ±0.004 mm, this range reduces uncertainty when comparing measured clearances to drawing tolerances. By using discrete gauge pins rather than progressive taper gauges, measurement resolution is improved and the inspection workflow becomes more deterministic. Durable design for workshop environments Manufactured from special steel and heat-treated for surface hardness, the pins resist wear while preserving dimensional stability across repeated use. The set's construction prioritises repeatability, meaning the same pin used across multiple checks will exhibit minimal dimensional drift. The physical robustness suits routine machine‑shop handling and supports longer maintenance intervals. Where traceable inspection is required, the set’s stable material and precise stepping make it suitable for laboratory verification as well as on-bench control tasks. Practical organisation and handling that speeds inspection The kit groups 101 individually graduated pins in an organised layout and includes a removable pin holder, which simplifies selection and temporary clamping during gauging. The consistent 50 mm pin length provides sufficient engagement depth for most through‑holes and blind bores without introducing excessive flex; this balance between length and rigidity improves measurement reliability. Lightweight handling of individual pins and a clear layout reduce time spent searching for the correct dimension, supporting faster throughput during batch checks. Suitable applications and complementary use cases This gauge set covers common workshop needs such as bore verification, mandrel checks and go/no-go confirmation in metalworking, toolmaking and assembly lines. The dimensional span is particularly well matched to components where the micro category of measurement applies — compact, high-precision tasks where short jaws or pins are required. The kit is compatible with optical comparators and micrometres for cross‑verification if traceable documentation of results is needed; it is also convenient for quality inspectors who require fixed, discrete references rather than continuously variable measuring instruments. For precise bore inspection and robust workshop performance, request the M318.586 through Metav Werkzeuge’s Emmerich hub or contact our experts for guidance on integrating the set into existing inspection routines. Technical data SKU: M318.586 GTIN: 4054469156231 ECLASS: 21170231 Tariff code: 90173000 Core specifications Measurement range: 16.0–17.0 mm Step size: 0.01 mm Declared accuracy: 0.004 mm Pin length: 50 mm Pieces per set: 101 Set weight: 11.7 kg Materials & features Material: Special steel Special feature: with pin holder Set type: graduated gauge pins Label: Prüfstift-Satz, 101-tlg. 16 - 17 mm Abstufung 0,01 mm FAQ What is the smallest increment in the set? The kit provides 0.01 mm increments between successive pins for precise stepwise checks. Can the pins be used for blind bore measurements? Yes. With a 50 mm pin length many blind bores can be assessed; longer engagement may require complementary probes. What tolerance can be expected from the gauges? The set is specified with an accuracy of 0.004 mm, supporting reliable pass/fail inspection within close tolerances. Is the material suitable for workshop use? The pins are made of special steel, heat-treated to resist wear and preserve dimensional stability in routine shop environments. How does this set assist serial inspection workflows? Discrete steps and clear organisation speed up selection and reduce interpretation time, enabling efficient batch checking and traceable verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17 mm Gauge Ball Pair Hardened Chrome Steel 0.003 mm Accuracy, Tolerance 0.00008 mm - Metav IndustryLine
Combine high geometric fidelity, wear resistance and compact form factor to secure reproducible reference measurements. The pair is ready for immediate use in calibration benches and inspection fixtures — order directly via Metav Werkzeuge or contact our consultants for specification support. Pair of precision gauge balls M318.427 — 17 mm, 0.003 mm accuracy (Metav IndustryLine) A pair of precision gauge balls M318.427 for reference measurements, calibration tasks and fixture alignment in metrology and inspection environments. 17 mm precision gauge balls Diameter tolerance 0.00008 mm Hardened chrome steel, >HRC 62 Dependable accuracy for reference work The pair delivers a declared accuracy of 0.003 mm, making it suitable as a reference artefact for comparative checks and bench calibration. Thanks to the compact 17 mm diameter, the components provide stable point contact on tactile probes and optical comparators, helping to reduce uncertainty in repeat measurements. The tight diameter tolerance of 0.00008 mm ensures consistent contact geometry, which simplifies interpretation of deviation reports and shortens inspection cycles. Robust material and surface quality for long service life Manufactured from hardened chrome steel with hardness above HRC 62, the spheres resist wear under repeated contact loads, maintaining form accuracy through many measurement cycles. The very low surface roughness Ra 0.00001 supports reliable probe touch and reduces surface-induced variation when used as a datum or reference point. These material and finish properties together contribute to predictable instrument performance and fewer re-measurements, supporting productivity in production and quality control. Practical handling, traceability and integration into workflows Supplied as a set of two, the balls enable quick comparative checks and fixture setting without additional accessories. The modest combined mass (0.08 kg) allows straightforward placement on stands or adapters used in laboratories and shop-floor inspection stations. The item is identifiable by SKU M318.427 and GTIN 4054469184159, facilitating inventory control and documentation. For traceable routines, these spheres act as compact reference standards that integrate with coordinate measuring machines and gauge blocks to validate probe systems and alignments. For traceable reference standards from Metav IndustryLine, contact Metav Werkzeuge in Emmerich to specify the right gauge ball set and arrange fast delivery or technical clarification Technical data SKU: M318.427 GTIN: 4054469184159 Designation: Pair of precision gauge balls Core specifications Diameter: 17 mm Accuracy: 0.003 mm Diameter tolerance: 0.00008 mm Weight: 0.08 kg Hardness: >HRC 62 Surface roughness Ra: 0.00001 Materials & features Material: Chrome steel, hardened Supplied as: Set of two balls Category: Gauges / Inspection FAQ Are these balls suitable as a tactile reference on a CMM? Yes. The M318.427 pair is suitable for use as compact tactile reference spheres on coordinate measuring machines, providing a defined contact geometry and tight dimensional tolerance. What does the stated accuracy of 0.003 mm mean in practice? An accuracy of 0.003 mm indicates the maximum permissible deviation from the nominal diameter for each sphere; this supports reliable reference checks and reduces uncertainty in comparative measurements. Can these gauge balls withstand repeated probe contacts? The hardened chrome steel construction with hardness above HRC 62 and the very fine surface finish are chosen to provide long-term resistance to wear under normal inspection use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17 mm Limit Go/No-Go Plug Gauge Wear Allowance On Good Side, DIN 7162 - Filetta
Robust compliance with DIN 7162 and the use of hardened steel combine to deliver repeatable go/no-go checks and reduced downtime. The built‑in wear allowance of the good side extends service life and simplifies acceptance routines. Order the gauge directly via Metav Werkzeuge or consult our specialists for application-specific advice. Limit plug gauge (Go/No-Go) – 17 mm, hardened steel by Filetta Limit plug gauge for standard-compliant bore inspection and fast acceptance testing in production and quality control DIN 7162 compliant gauge Hardened steel construction Wear allowance on the good side Consistent compliance for production and inspection The limit plug gauge is designed for rapid, repeatable verification of bore tolerances on the shop floor. Manufactured from hardened steel and produced to DIN 7162, the gauge provides a clear go/no‑go result that speeds up acceptance checks and reduces subjective judgement. The incorporated wear allowance on the good side compensates for gradual material loss, helping to preserve repeatability over many cycles and to maintain inspection accuracy without frequent replacements. Practical robustness that suits serial testing Built for routine use, this gauge combines a simple go/no‑go principle with durable construction. A nominal diameter of 17 mm makes it suitable for nominal bore inspections where quick verification is required rather than dimensional metrology with calipers. The hardened steel material resists abrasion and deformation, ensuring the long service life of the tool even under continuous handling. Traceable marking and the compact form factor support integration into inspection benches and go/no‑go stations. Efficiency through reduced rework and predictable maintenance Using a limit plug gauge aligned to DIN 7162 reduces the time spent on individual measurements and the risk of false rejections, which supports higher throughput and lower rework rates. The explicit wear allowance on the good side gives a predictable maintenance interval, simplifying inventory planning and calibration scheduling. As a Filetta product, the gauge is a pragmatic choice where robust, standards‑based acceptance testing is required and where operational consistency matters more than micrometric adjustment. Contact Metav Werkzeuge in Emmerich for assistance in selecting the right DIN 7162 limit plug gauge and for support with order and delivery: info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: MS911.221 Type: Limit plug gauge (Go/No-Go) Manufacturer: Filetta Facts Nominal diameter: 17 mm Standard: DIN 7162 Material: hardened steel Special features Wear allowance of the good side Designed for go/no-go acceptance testing Suitable for serial inspection routines FAQ What is the primary application of this limit plug gauge? The limit plug gauge is intended for rapid acceptance testing of bores; the Filetta limit plug gauge performs go/no-go checks to confirm conformity with nominal bore criteria. Which standard does the gauge comply with? The gauge is manufactured to DIN 7162, ensuring compatibility with common industrial acceptance procedures. What material is the gauge made from and why is that important? Constructed from hardened steel, the gauge resists wear and deformation, preserving the go/no-go function and extending service life under repetitive use. How does the wear allowance affect inspection routines? The included wear allowance on the good side provides a defined margin that delays rejection due to minor surface wear, enabling predictable maintenance and replacement intervals. Is the 17 mm size suitable for serial production checks? Yes; the 17 mm nominal diameter is suited to routine serial inspections where fast go/no-go verification is required rather than detailed dimensional reporting. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
17 mm Limit Plug Gauge H7 DIN 2245 Hardened Gauge Steel, 0.2 kg - Metav IndustryLine
The product data contains contradictory entries—specifically conflicting weight information and inconsistent condition indicators—which make it impossible to generate a reliable product description. These discrepancies in the source data create confusion and prevent accurate representation of the item. To ensure the product description is both precise and trustworthy, it is essential to address these issues. Please review the source data thoroughly, correct any conflicting weight details, and standardise the condition indicators. Once the data has been updated and verified for accuracy, kindly resubmit the item details for processing. Accurate and consistent data is crucial for generating dependable product descriptions.
17 mm Setting Ring Form C, Hardened Gauge Steel, DIN 2250/DIN 286 JS 3 - Metav IndustryLine
Benefit from a compact reference that combines hardened and lapped gauge steel, conformity to DIN 2250 / DIN 286 JS 3, and a stable Form C geometry to ensure repeatable set‑ups; order the setting ring directly via Metav Werkzeuge or ask our consultants for application advice. Setting ring 17 mm — Gauge ring, hardened and lapped, Form C (Metav IndustryLine) The Setting ring 17 mm is a precision reference ring for setting and checking internal diameters and for use as a workshop master when calibrating small bore gauges and measuring instruments. Hardened and lapped gauge steel Conforms to DIN 2250 and DIN 286 JS 3 Form C for stable seating and repeatability Precise 17 mm reference diameter Reliable reference for workshop and inspection A well‑executed reference simplifies routine metrology. The gauge ring is manufactured from hardened and lapped gauge steel, providing a wear‑resistant contact surface that keeps tolerance drift to a minimum during frequent use. Thanks to its compact diameter, the ring serves as a straightforward setting standard for bore gauges and dial bore indicators, enabling consistent adjustment of measuring instruments and supporting rapid checks in production and inspection areas. The design reduces measurement uncertainty by offering a stable reference surface that interfaces cleanly with common metrology probes. Traceable tolerances and what they mean for quality control Conformity to DIN 2250 in combination with DIN 286 JS 3 tolerance grading guarantees a clearly defined dimensional class for the ring. The JS 3 designation indicates a tight tolerance band suitable for precision workshop tasks where snug fit and reliable interchangeability are required. For production control this translates into predictable set‑up behaviour and fewer adjustment cycles when transferring nominal sizes from drawing to machine. The standardised specification simplifies documentation and audit trails within quality systems and supports routine verification against other calibrated references. Design details that improve repeatability and handling Form C geometry gives a stable seating surface and a compact contact area, helping to avoid rocking or misalignment when placing the ring on a fixture or when engaging measuring probes. The finished, lapped bore surface reduces local contact stress and minimises in‑use wear, extending the effective life of the reference. Robust processing and controlled hardening ensure the component maintains its form under normal workshop conditions; the result is a reference that supports repeatable readings and reduces downtime caused by recalibration needs. Practical advantages from a trusted metrology partner Sourcing the ring from Metav IndustryLine provides more than a single component: it adds a supply chain partner experienced in precision tools. Metav’s approach emphasises dependable stock and clear delivery processes so that workshop planning remains uninterrupted. For teams that manage multiple gauging tasks, having standardised, durable references reduces the number of ad‑hoc measurements and speeds up inspection loops — a pragmatic efficiency gain that supports overall process reliability. Contact Metav Werkzeuge for specific delivery options and technical guidance on the Metav IndustryLine setting rings and their integration into existing inspection routines Technical data Article number: M313.017 GTIN: 4054469120553 ECLASS: 21170104 Customs tariff number: 90173000 Facts Diameter: 17 mm Form: C Norms: DIN 2250; DIN 286 JS 3 Material designation: gauge steel, hardened and lapped Special features Hardened and lapped gauge steel surface Form C geometry for stable seating Suitable as a workshop reference and for instrument setting Manufacturer brand: Metav IndustryLine FAQ What is the primary use of this setting ring? The setting ring is intended as a precision reference for setting and checking internal diameters and for calibrating small bore gauges in workshop and inspection environments. Which standards does the ring comply with? Manufactured to the requirements of DIN 2250 and DIN 286 JS 3, the ring meets recognised tolerance and design classes for precision gauge rings. What does Form C mean for practical use? Form C denotes the ring’s seating geometry; it provides a stable contact interface that improves repeatability when placing the ring on fixtures or engaging measuring probes. Is the material suitable for frequent use? Yes. The component is made from hardened and lapped gauge steel, offering a wear‑resistant surface and prolonged service life under normal inspection conditions. Can Metav provide technical advice for integrating the ring into a quality system? Metav IndustryLine representatives can advise on best practices for using the ring in calibration and control routines to ensure consistent measurement processes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.01mm Gauge Pin Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of the combination of high repeatability and workshop-grade robustness for reliable in-process checks; the tight tolerance of ±0.002 mm and the stable 50 mm engagement ensure consistent final-size verification. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge Pin M323.H01 — 17.01 mm diameter, 50 mm length (Metav IndustryLine) The Gauge Pin M323.H01 is a workshop-grade precision plug gauge designed for final-size inspection and go/no-go checks in production and quality control. Workshop-grade construction for daily use Diameter 17.01 mm with ±0.002 mm tolerance Stable 50 mm engagement for repeatable seating Supplied in a protective transport case Precision that protects quality and reduces rework The plug gauge delivers the decisive advantage of consistent pass/fail decisions thanks to its exceptionally tight tolerance of ±0.002 mm. With a diameter of 17.01 mm, this test pin performs final-size verification where small deviations have large consequences; the narrow error band reduces scrap and minimises costly rework. The dimensional stability offered by the design converts a single measurement into a reliable production control point, helping maintain process capability across batches. Durable design built for the workshop environment Manufactured from special steel and specified as a workshop-grade item, the pin withstands repeated use on shop floors without rapid wear. The 50 mm length provides secure engagement in fixtures and jigs, improving alignment and reducing wobble during insertion. Supplied in a protective transport case, the gauge arrives ready for safe storage and handling between uses; this packaging prevents nicks and preserves the calibration state for longer service intervals. Simple integration into existing inspection routines The plug gauge is immediately usable in go/no-go fixtures and manual inspection benches as a straightforward physical standard. Its compact form and clear dimensional definition make it suitable for assembly lines, incoming inspection and rapid final checks. Traceability is supported by the included SKU and GTIN identifiers, allowing easy logging into quality records and inventory systems; the solid construction means repeatability and tactile feedback during checks, which is useful where quick, reliable decisions are required. For purchase enquiries or technical advice regarding the Metav IndustryLine gauge pin M323.H01, contact Metav Werkzeuge to discuss specification fit and availability Technical data Article number: M323.H01 GTIN: 4061905071386 Manufacturer: Metav IndustryLine Facts Diameter: 17.01 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop version Supplied in protective transport case Category: gauge pin (Messstifte) FAQ What tolerance does this gauge pin offer? The Metav IndustryLine gauge pin M323.H01 is specified with an accuracy of ±0.002 mm, suitable for tight final-size checks and high repeatability in workshop environments. Is the pin suitable for use in handheld go/no-go checks? Yes, the 50 mm length and robust construction make the pin suitable for handheld or fixture-mounted go/no-go checks on assembly and inspection benches. What is the material and how does it affect wear? Constructed from special steel, the plug gauge provides improved wear resistance compared with softer materials, extending service life under frequent use. How should the gauge pin be stored between uses? The gauge pin is supplied in a protective transport case; storing it in that case when not in use prevents surface damage and helps maintain measurement integrity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.02mm Gauge Pin, Workshop Version, 50mm Length - Metav IndustryLine
Take advantage of a 17.02 mm gauge pin with ±0.002 mm tolerance and a robust 50 mm shank to secure repeatable end-measure checks and minimise rework. The combination of a precise diameter, workshop-grade construction and compact length supports reliable in-process gauging; order the part directly via Metav Werkzeuge or consult the technical team for specification matching. Gauge pin M323.H02 — single gauge pin, 17.02 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin M323.H02 is a single end-measure pin designed for accurate bore and fit testing in routine workshop inspection tasks. Workshop design for everyday inspection Diameter held to ±0.002 mm tolerance 50 mm shank for stable probing Made from special steel for wear resistance Ensure repeatable pass/fail checks with tight diameter control A precisely held 17.02 mm diameter is the defining characteristic for trustworthy plug‑style gauging. With a declared tolerance of ±0.002 mm, this item is suited to applications where consistent go/no‑go decisions and tight fits are required. The short, rigid 50 mm length reduces deflection during insertion and provides a stable contact for end‑measure tasks, translating directly into fewer measurement variations and less rework on production parts. The declared accuracy supports routine dimensional control in machining and assembly operations, where reproducible outcomes are critical. Robust material and workshop construction for daily use Constructed from special steel, the pin offers a balance between hardness and surface finish that prolongs service life under regular use. The workshop design indicates a tool built for frequent handling and inspection cycles rather than delicate laboratory-only use, making it a pragmatic choice for quality inspectors and shop floor technicians. The relatively low mass (0.15 kg) combined with the compact 50 mm shank simplifies handling while maintaining the stability needed for precise contact measurements. Simple fit into established inspection workflows Marked with SKU M323.H02 and a GTIN for inventory control, the pin integrates easily into traceable stock systems and tooling sets. Its specification suits end measurement ("endmasse") applications such as bore checking, alignment verification and fit testing of mating parts. The compact format means it can be stored alongside common workshop gauges and swapped quickly during inspection rounds, supporting efficient throughput without complex setup or extra fixtures. Choose the Metav IndustryLine gauge pin for dependable end‑measure verification and contact Metav Werkzeuge in Emmerich for delivery and specification support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.H02 GTIN: 4061905071393 Category: Gauge pins SKU: M323.H02 Facts Diameter: 17.02 mm Length: 50 mm Accuracy / tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Design: Workshop execution Intended use: End measurements (endmasse) FAQ What tolerance does this gauge pin maintain? The gauge pin M323.H02 is specified with a tolerance of ±0.002 mm for diameter control. For which tasks is this pin suitable? This pin is intended for end‑measure checks such as bore gauging, fit verification and simple pass/fail inspection in machining and assembly environments. What material is the pin made from? The pin is manufactured from special steel, giving a durable contact surface appropriate for routine workshop inspection. Is calibration status indicated for this product? Calibration status is not specified in the product data provided. Which sectors commonly use this type of gauge pin? Typical applications include general engineering, toolmaking, quality control in metalworking and production lines where repeatable dimensional checks are required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.03mm Gauge Pin, Single, 50mm Length Workshop Version - Metav IndustryLine
Taking advantage of ±0.002 mm tolerance and a compact 50 mm overall length, this workshop-grade gauge pin combines high repeatability with robust construction for reliable end‑measurement tasks. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.H03 — single precision pin, Ø 17.03 mm, 50 mm length (Metav IndustryLine) The Gauge pin M323.H03 is a single precision pin for end‑measurements and dimensional reference checks in workshop and inspection contexts. Single precision gauge pin, Ø 17.03 mm Tolerance ±0.002 mm for fine checks 50 mm overall length, workshop design Special steel construction with transport case Precision that secures quality control The gauge pin delivers a nominal diameter of 17.03 mm with a stated accuracy of ±0.002 mm, a tolerance that supports fine dimensional verification and tight process control. Such a small tolerance reduces uncertainty when checking bores, plug fits or reference gauges, enabling clear go/no‑go decisions on the shop floor. The high repeatability of the reference surface means fewer remeasurements and a more predictable inspection workflow, which is particularly valuable where component interchangeability and assembly tolerances are critical. Compact format that eases handling and alignment Classified in the Micro range (measurement range up to 100 mm), the compact 50 mm length keeps the pin rigid and easy to position in confined set‑ups. Shorter overall length minimises lever‑arm deflection, simplifying alignment in jigs and small assemblies. The workshop configuration supports repetitive checking of small parts, gauges and final dimensions where space is limited yet precision cannot be compromised. Delivered in a protective transport case, the unit is ready for secure storage and safe movement between inspection benches. Robust construction for everyday workshop use Manufactured from special steel, the pin is designed as a durable, single‑piece reference suitable for routine inspection duties. The workshop version prioritises practicality and longevity: sturdy material selection and a compact form factor make it a dependable tool for maintenance, incoming inspection and production control. Lightweight at 0.15 kg, the pin balances portability with sufficient mass to be stable during manual gauging operations, supporting consistent measurement outcomes over repeated use. Choose Metav IndustryLine precision pins for dependable end‑measurement — Metav Werkzeuge in Emmerich supplies technical details and stock information for the M323.H03 Technical Data Article number: M323.H03 GTIN: 4061905071409 Label: Prüfstift, einzeln, 17,03 mm Länge 50 mm SKU: M323.H03 Brand: Metav IndustryLine Dimensions & Weight Diameter: 17.03 mm Length: 50 mm Weight: 0.15 kg Accuracy: ±0.002 mm Features & Materials Material: Special steel Workshop design Delivered in transport case Single gauge pin Intended use: end measurements FAQ What accuracy can be expected from this gauge pin? The stated accuracy is ±0.002 mm; this level of precision makes the M323.H03 suitable for fine dimensional checks and repeatable reference measurements. Which applications suit this precision pin? The pin is intended for end‑measurements, bore checks and plug‑fit verifications in workshop inspection, assembly control and quality assurance tasks where compact reference gauges are required. Is the gauge pin supplied ready for transport and storage? The workshop version is supplied in a protective transport case to safeguard the reference surfaces during movement and storage. What material is the pin made from and how does that affect use? Made from special steel, the pin offers robust wear resistance appropriate for routine workshop inspection; material choice supports long‑term dimensional stability under normal use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.04 mm Gauge Pin Length 50 mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of a robust workshop design combined with a precise Ø 17.04 mm measuring diameter and a tight tolerance of ±0.002 mm to ensure reproducible end‑measurements; the 50 mm overall length facilitates reliable probing in confined assemblies. Order directly via Metav Werkzeuge or consult the specialists for application advice. Test pin M323.H04 — workshop test pin, Ø 17.04 mm, 50 mm length (Metav IndustryLine) A Test Pin M323.H04 designed for precision end‑measurements and component verification in workshop metrology Workshop version for robust use Diameter Ø 17.04 mm for end‑measurements Length 50 mm for deep probing tasks Tolerance ±0.002 mm for high precision Precision for routine end‑measurement tasks The M323.H04 is engineered as a compact, micro‑range measuring pin intended for accurate end‑measurements and reference checks in production and maintenance environments. With a defined measuring diameter of Ø 17.04 mm and an overall length of 50 mm, the pin suits applications where repeatable contact geometry and short‑reach probing are required. The workshop configuration emphasises durability and straightforward handling, enabling consistent results during incoming inspection, setup checks and quick verification runs. Tight tolerance for reproducible results A declared tolerance of ±0.002 mm positions this test pin in the high‑precision segment for workshop gauges. This level of precision reduces uncertainty in comparative checks and is especially beneficial where small dimensional deviations have functional consequences. The pin is manufactured from special steel, providing dimensional stability under normal workshop conditions. Where measurement traceability is required, the component dimension and tolerance allow clear pass/fail criteria to be defined for quality control procedures. Practical handling and storage benefits Delivered in a protective transport case, the pin remains protected from damage and contamination between uses, supporting long‑term reliability. At a mass of 0.15 kg, the component is easy to manoeuvre and integrate into fixture assemblies or portable inspection sets. The compact format and workshop specification make the item suitable for technician‑level use: rapid substitution, minimal setup time and straightforward incorporation into standard testing jigs or bench fixtures. How this pin supports production reliability As part of the Metav IndustryLine, this test pin contributes to a predictable measurement workflow: consistent contact geometry, defined tolerance and durable material reduce the rate of rework and support faster go/no‑go decisions on the shopfloor. Metav’s quality filtering and broad product range ensure that the component integrates with established inspection procedures and complements existing measuring equipment in small and medium‑sized workshops alike. For workshop measurement reliability choose the Metav IndustryLine M323.H04 via Metav Werkzeuge — contact the Emmerich team at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice Technical data Article number: M323.H04 Manufacturer: Metav IndustryLine GTIN: 4061905071911 Facts Diameter: 17.04 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Special features Material: special steel Workshop version Delivered in protective case Category: Test pins (Messstifte) Application: end measurements FAQ Is this test pin suitable for precision end‑measurements in a workshop environment? Yes. The M323.H04 test pin from Metav IndustryLine is designed for workshop end‑measurements, offering a defined contact diameter of 17.04 mm and a tolerance of ±0.002 mm suitable for reliable comparative checks. What materials is the pin compatible with during inspection tasks? The M323.H04 is made from special steel and is intended as a reference or contact pin rather than a machining tool; it is suitable for measuring interfaces on components manufactured from typical workshop materials. How is the pin delivered and protected during transport? The test pin is supplied in a protective transport case to prevent damage and contamination during storage and movement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.05mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of workshop-ready durability, ±0.002 mm tolerance and compact handling for reliable end-dimension verification; order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.H05 — single gauge pin, Ø 17.05 mm, 50 mm length (Metav IndustryLine) A Gauge pin M323.H05 designed for precise end‑dimension checks and reference measurements in workshop and quality‑control environments. Workshop version for daily use Tolerance ±0.002 mm Special steel construction Precision that reduces rework and rejects Built for repeatable reference measurements, this gauge pin delivers a verified tolerance of ±0.002 mm, which translates into consistently tight pass/fail decisions on inspection benches. The nominal diameter 17.05 mm and length 50 mm make it suitable as a master pin for go/no‑go plug tests and for set‑up verification in small‑batch production. By converting dimensional uncertainty into a clear numerical limit, this tool supports faster quality decisions and reduces downstream rework. Robust construction for everyday workshop demands The workshop specification is reflected in a special steel construction that balances hardness with dimensional stability. The compact geometry minimises bending and handling error during insertion and removal, while the moderate mass contributes to stability without cumbersome weight. These attributes combine to provide a durable inspection artefact that withstands frequent use in machineshops, jigs and gauging fixtures, keeping inspection cycles short and dependable. Practical integration into inspection routines As an end‑dimension reference, the pin is straightforward to incorporate into existing gauges, fixture arrays and manual checks. Marked identification (SKU: M323.H05) simplifies traceability within calibration logs and process documentation. The compact format aids ergonomic handling and rapid alignment on test benches, supporting efficient throughput in small to medium‑scale quality processes while maintaining the required metrological clarity. Choose Metav IndustryLine gauge pins for consistent end‑dimension checks — contact Metav Werkzeuge in Emmerich for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data SKU: M323.H05 GTIN: 4061905069604 Manufacturer: Metav IndustryLine Description: Gauge pin, single, Ø 17.05 mm, length 50 mm Material: Special steel Tolerance: ±0.002 mm Weight: 0.15 kg Facts Diameter: 17.05 mm Length: 50 mm Mass: 0.15 kg ECLASS: 21170231 Label: Gauge pin, single, 17.05 mm length 50 mm Special features Workshop version (robust build) Intended for end‑dimension verification Suitable as reference/master pin for plug gauging FAQ What tolerance can be expected from this gauge pin? The gauge pin delivers a nominal tolerance of ±0.002 mm, allowing tight go/no‑go evaluations and repeatable reference measurements. Is the pin suitable for use as a master in gauging fixtures? Yes — the gauge pin M323.H05 is designed for use as a master or reference pin in plug‑gauging and fixture checks where a 17.05 mm diameter is required. Which material is used for the pin and how does it affect performance? The pin is made from special steel, selected to provide dimensional stability and wear resistance for frequent workshop use. How is the part identified for traceability? The item is listed under SKU M323.H05 and GTIN 4061905069604 to support calibration records and inventory tracking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.06mm Gauge Pin, Single, 50mm Length, Workshop Version, Special Steel - Metav IndustryLine
Benefit from ±0.002 mm repeatability, robust special steel construction and a compact 50 mm length for consistent end‑gauging in workshop and inspection setups. Order the gauge pin directly via Metav Werkzeuge or consult the team for application guidance. Gauge pin Ø 17.06 mm, length 50 mm — workshop gauge pin by Metav IndustryLine A gauge pin Ø 17.06 mm, length 50 mm for precise end‑measurements and fit checks in production and inspection environments Workshop-grade construction Special steel, wear-resistant Diameter Ø 17.06 mm precision Tolerance ±0.002 mm accuracy Precision where it matters The test pin is designed for high‑accuracy end‑gauging and reference measurements, offering a tight tolerance of ±0.002 mm that supports reliable go/no‑go checks and dimensional verification. With a nominal diameter of Ø 17.06 mm, the component is suited to fine fits and small bore inspections where repeatability and traceable tolerances are required. The numerical specification simplifies integration into inspection protocols and provides a clear basis for process capability assessments. Durable workshop construction for everyday use Manufactured in special steel with a workshop finish, the pin balances wear resistance and handling convenience for routine use at the bench or on the shop floor. The 50 mm length provides a stable insertion depth for fixtures while remaining compact enough for rapid handling and storage. The workshop execution prioritises robustness under frequent contact, so maintenance intervals are extended and measurement throughput remains steady in production environments. Integration into quality workflows and procurement Supplied as a single precision gauge pin, the component is ready for direct use in fixture checks, assembly control and bore verification. Traceability is supported by the listed identifiers and procurement data, which enable straightforward stock keeping and replacement: SKU M323.H06 and GTIN 4061905069611. The single‑piece format simplifies spares management and minimises batch variability in inspection routines, promoting consistent measurement results across shifts. For a reliable supply of Metav IndustryLine gauge pins, request a technical quote from Metav Werkzeuge GmbH in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Manufacturer: Metav IndustryLine Article number / SKU: M323.H06 GTIN: 4061905069611 Facts Diameter: 17.06 mm Length: 50 mm Tolerance / accuracy: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop-grade execution Single piece supply Category: gauge pin / test pin FAQ What accuracy can be expected from this gauge pin? The gauge pin offers an accuracy of ±0.002 mm, making it suitable for demanding end‑gauging and fit checks where tight repeatability is required; reference SKU M323.H06 for ordering. Which material is used for the pin? This Metav IndustryLine pin is made from special steel with a workshop finish to improve wear resistance and durability under frequent use. What typical applications suit this test pin? The pin is intended for end‑measurements, bore checks and fixture verification in production and inspection workflows, where a nominal Ø 17.06 mm reference is required. Is the component supplied individually or in sets? The product is supplied as a single gauge pin (single piece); use SKU M323.H06 when specifying a replacement or spare. How can the pin be integrated into existing inspection fixtures? The compact 50 mm length and precise diameter allow direct insertion into jigs, templates and go/no‑go assemblies, enabling straightforward retrofit into quality control stations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.07mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of pinpoint dimensional control and a robust workshop grade design to maintain consistent inspection results; order the test pin directly via Metav Werkzeuge or consult our specialists for application advice. Test pin M323.H07 – single gauge pin, Ø 17.07 mm, 50 mm length (Metav IndustryLine) The Test pin M323.H07 is a single precision gauge pin designed for end‑measure and inspection tasks in workshop and inspection environments, offering stable contact geometry for repeatable results. Precision diameter 17.07 mm Length 50 mm for confined measurements Tolerance ±0.002 mm for fine control Made from special steel for workshop use Precision that keeps production on target The core strength of this inspection pin is its dimensional fidelity: a diameter of 17.07 mm held to a tight ±0.002 mm deviation ensures that gauge checks and go/no‑go assessments remain reliable in routine quality control. Such accuracy reduces downstream rework and supports consistent batch acceptance criteria. The controlled tolerance and cylindrical form make the pin suitable for repeatable contact with reference surfaces and for use as a reference master in inspection fixtures. Robust workshop design for daily use Manufactured from special steel and specified as a workshop version, this single test pin is built to withstand regular handling and contact cycles typical of measurement benches. The 50 mm length provides reach into deeper bores or fixtures while keeping the contact area accessible; the modest mass of approximately 0.15 kg contributes to easy manual handling and fast placement in pin blocks or test jigs. The construction balances wear resistance with maintainable geometry for extended service life. Practical integration with inspection workflows Delivered as a single precision pin with an identifiable SKU and GTIN, the item fits into established pin sets, fixture pockets and bespoke test appliances where a single, high‑accuracy gauge element is required. Labelling and dimensional specification support traceability in inspection protocols, while the straightforward geometry eases repeat measurement planning. For shops maintaining comprehensive inventory control, the clear specification simplifies substitution and replenishment planning. Secure the M323.H07 from Metav Werkzeuge for dependable gauge control—contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored application advice and stocking information. Technical data Article number: M323.H07 GTIN: 4061905069628 Label: Test pin, single, 17.07 mm length 50 mm Category: Gauge pins Manufacturer: Metav IndustryLine Dimensions & accuracy Diameter: 17.07 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Materials & features Material: Special steel Workshop version Single test pin FAQ What tolerance does the pin provide? The test pin M323.H07 is specified with a tolerance of ±0.002 mm, suitable for fine measurement control in inspection routines. What are the exact dimensions of the pin? Diameter is 17.07 mm and overall length is 50 mm for the single gauge pin, offering reach for moderate‑depth checks. What material is used for the pin and how does it perform? Constructed from special steel and supplied in a workshop grade finish, the pin offers good wear resistance and stability under frequent inspection use. Is this pin suitable for use in pin blocks and fixtures? Yes; the single precision geometry is compatible with common pin blocks and fixture pockets where a defined gauge element is required. How can the product be identified for ordering or stock control? Refer to article number M323.H07 and GTIN 4061905069628 to match the exact test pin and ensure correct replenishment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.08mm Gauge Pin Workshop Version, 50mm Length - Metav IndustryLine
Take advantage of the combination of ±0.002 mm accuracy, a Ø17.08 mm nominal diameter and a compact 50 mm length for reliable end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or ask our consultants if further verification is needed. Gauge pin, single, Ø17.08 mm × 50 mm — Metav IndustryLine workshop version with ±0.002 mm accuracy Gauge pin, single, Ø17.08 mm × 50 mm is a workshop‑grade inspection pin engineered for fast, repeatable verification of end dimensions and clearance gauges in routine production environments. Workshop-execution for robust use Diameter Ø17.08 mm nominal Length 50 mm for compact checks Tolerance ±0.002 mm for fine control Ensure consistent part quality with compact precision The compact design of this gauge pin provides a straightforward means of verifying end‑dimensions and plug fits without complex fixtures. With a nominal diameter of Ø17.08 mm and a measured length of 50 mm, the component is sized for tight insertion checks and quick go/no‑go trials. The specified ±0.002 mm indication describes the manufacturing deviation that can be expected from the part; in practice this level of control allows confident acceptance or rejection decisions on small to medium components where dimensional conformity is critical. The special steel construction adds stability to the contact surface and reduces the risk of rapid wear in regular use. Robust construction to reduce rework and downtime Built as a workshop‑execution item, the pin combines a hardwearing material choice with a geometry that resists deformation during handling and repeated measurement cycles. The stainless finish and dense steel core provide a balance between surface resilience and dimensional stability; this reduces the frequency of replacement and the likelihood of measurement‑induced adjustment loops on the shop floor. In applications such as batch inspection, tool set‑up validation or simple assembly checks, the compact length and consistent diameter minimise handling time and support faster throughput in production cells. Practical integration into inspection routines and fixtures The gauge pin serves as a simple reference for manual gauging and as a precision datum when mounted in jigs or test fixtures. Its compact footprint makes it suitable for confined verification points and for use in comparative checks against master gauges. Traceable identification via GTIN and SKU supports inventory control and process documentation, while the robust material choice ensures the pin holds geometry through repetitive engagement. For inspection departments seeking a cost‑effective, low‑complexity solution for end‑dimension checks, this test pin delivers reliable performance with minimal ancillary equipment. Contact Metav Werkzeuge to discuss whether the Metav IndustryLine gauge pin suits the specific inspection task and to arrange supply through our Emmerich specialists Technical Data Article number: M323.H08 GTIN: 4061905070013 SKU: M323.H08 Brand: Metav IndustryLine Material: Special steel Length: 50 mm Nominal diameter: 17.08 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special designation: Workshop version Facts Nominal diameter: 17.08 mm Length: 50 mm Manufacturing deviation: ±0.002 mm Weight: 0.15 kg GTIN: 4061905070013 Special features Single gauge pin format Suitable for end‑dimension and plug checks Robust steel construction for enhanced wear resistance Compact form for confined inspection points FAQ What tolerance does this gauge pin hold? The Metav IndustryLine gauge pin M323.H08 is manufactured to a tolerance of ±0.002 mm, enabling fine acceptance decisions in production checks. Is the pin suitable for fixture mounting? Yes. The single gauge pin format and compact 50 mm length make the M323.H08 suitable for integration into jigs and test fixtures as a reference datum. What material is used for the pin? The inspection pin is made from special steel, chosen to balance surface durability with dimensional stability under routine use. Can this pin be used for quick plug checks on production parts? Absolutely. With a nominal diameter of Ø17.08 mm and workshop execution, the M323.H08 is designed for fast go/no‑go and clearance verifications in a production environment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.09mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Combining ±0.002 mm accuracy with a special steel construction and a compact Ø17.09 mm / 50 mm form, this probe pin delivers repeatable end‑measure checks in workshop environments; order the component directly via Metav Werkzeuge or contact our consultants for application guidance. Test Pin M323.H09 — Single probe pin, Ø17.09 mm, 50 mm length (Metav IndustryLine) The single Test Pin M323.H09 is a workshop‑grade inspection pin designed for end‑dimension checks and gauge fixtures in production and quality control environments. High-precision ±0.002 mm tolerance Diameter 17.09 mm, length 50 mm Special steel, workshop version Supplied as a single probe pin Precision where it matters: reliable end‑measure checks The M323.H09 is engineered for consistent, repeatable measurements in inspection and gauge assemblies. With a certified geometry of 17.09 mm diameter and a length of 50 mm, the probe pin offers a declared position tolerance of ±0.002 mm, which places it in the high‑precision bracket for workshop inspection tools. Such accuracy reduces uncertainty in go/no‑go tests and end‑measure verifications, supporting tighter production tolerances and fewer downstream reworks. The compact form factor keeps handling straightforward while maintaining the stiffness required for short‑range control tasks. Robust workshop construction for everyday use Built in a workshop version specification from special steel, this inspection pin resists routine handling and the typical rigours of shop‑floor assembly. The material choice balances hardness and toughness to prevent premature wear while keeping the surface finish suitable for contact gauges and master rings. At approximately 0.15 kg, the component is easy to position in fixtures and remains stable during short measurement cycles. The single‑piece supply format simplifies inventory management for gauge makers and maintenance departments who require individual replacement pins rather than pre‑assembled sets. Integration and traceability for production control This probe pin is aimed at quality control and fixture construction where traceable, repeatable dimensions are essential. The item is listed under SKU M323.H09 and GTIN 4061905070020, facilitating procurement and inventory traceability in ERP systems. Its geometry and tolerance make it suitable as a reference element in plug gauges, limit pins and custom inspection jigs where precise end‑measure values are required. Where necessary, Metav’s advisers can assist in matching the pin to existing gauge housings or suggesting protective housings to preserve the contact surface over long production runs. Contact Metav Werkzeuge today to discuss procurement of the M323.H09 single probe pin from Metav IndustryLine and to receive tailored advice on fitment and delivery from our Emmerich specialists Technical Data Article number: M323.H09 GTIN: 4061905070020 Category: Messstifte Facts Diameter: 17.09 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop version Supplied single (individual probe pin) High‑precision inspection use FAQ What tolerance does the probe pin offer? The probe pin M323.H09 is specified with a tolerance of ±0.002 mm, suitable for high‑precision end‑measure checks. Which material is used for this test pin? This inspection pin is made from special steel in a workshop configuration, optimised for durability in routine inspection tasks. Is the item supplied individually or in sets? The product is supplied as a single probe pin (single item), intended for direct replacement or individual use in gauge assemblies. What are the product identifiers for ordering? Order using SKU M323.H09; the GTIN is 4061905070020 for system entry and traceability. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.11mm Gauge Pin 50mm Length Workshop Finish, ±0.002 Accuracy - Metav IndustryLine
Take advantage of the combination of high repeatability (±0.002 mm), durable special‑steel construction and a compact 50 mm length for consistent end‑measure checks; order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single, 17.11 mm, 50 mm length – Precision test pin with workshop design (Metav IndustryLine) A gauge pin, single, 17.11 mm, 50 mm length supplied for workshop inspection and end‑measure verification, suitable for routine dimensional checks and assembly controls Workshop-grade finish for routine inspection Tight tolerance: ±0.002 mm for reliable checking Special steel construction for long-term durability Supplied in protective transport case Consistent precision for repeatable checks The inspection pin delivers measurable confidence through its ±0.002 mm specification and a nominal diameter of 17.11 mm. This tolerance level places the component in a high‑precision bracket for typical workshop gauging tasks, where repeatability and clear accept/reject criteria are essential. The compact 50 mm length provides a stable reference surface that resists bending under normal handling, enabling consistent results during dimensional verification and end‑measure controls. The fine tolerance supports reliable decision‑making in quality routines without adding complexity to the measuring process. Robust design that suits everyday workshop use Designed as a workshop version, this single test pin pairs practical handling with corrosion‑resistant performance provided by special steel. The construction balances stiffness and service life so that frequent insertion and removal do not rapidly degrade the gauge surface. Supplied in a protective transport case, the pin remains safeguarded during storage and transit, which reduces the risk of nicks or contamination that would otherwise compromise measurement certainty. At a weight of 0.15 kg, the component is easy to position by hand or mount in simple jigs for repetitive checks. Clear identification and integration into inventory For straightforward procurement and traceability, the article is registered with clear identifiers and packing details that simplify stock management and process documentation. The single‑piece supply format reduces inventory complexity while the compact geometry enables integration into handheld testing sets or fixed inspection benches. Measurable data such as the diameter, length and stated tolerance provide a concise technical basis for calibration records and inspection plans, supporting consistent quality control across production batches. For precision inspection components from Metav IndustryLine purchase via Metav Werkzeuge; contact the Emmerich team at info@metav-werkzeuge.com or call +49 2822 7131930 for specification support and supply information Technical data Article number: M323.H11 GTIN: 4061905070709 SKU: M323.H11 Facts Diameter: 17.11 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Special features Material: Special steel Workshop version Supplied single piece Protective transport case FAQ What is the primary application for this test pin? The gauge pin M323.H11 from Metav IndustryLine is intended for end‑measure checks, dimensional verification and routine inspection tasks in workshop environments. What are the exact dimensions of the pin? The inspection pin has a nominal diameter of 17.11 mm and an overall length of 50 mm. Which tolerance does this gauge pin achieve? This test pin is specified with a tolerance of ±0.002 mm for high repeatability in measuring applications. Is the pin suitable for frequent workshop handling? Yes, the Metav IndustryLine gauge pin is a workshop version made from special steel and supplied in a protective transport case to withstand routine use. How is the product supplied and identified for ordering? The item is supplied as a single piece and identified as SKU M323.H11 with GTIN 4061905070709 for ordering and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.12mm Test Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of exacting dimensional control and robust workshop design for dependable end‑measurement checks; order the gauge pin directly via Metav Werkzeuge or consult the team for application advice. M323.H12 gauge pin – 17.12 mm diameter, 50 mm length (Metav IndustryLine) The M323.H12 gauge pin is a single test pin with a nominal diameter of 17.12 mm, designed for precise end‑measurement tasks and inspection fixtures in workshop environments. Workshop execution for robust use Nominal diameter 17.12 mm for precise fits High accuracy ±0.002 mm for repeatable checks Precision that supports reliable inspection routines The cylindrical test element provides a defined reference diameter, enabling consistent end measurements and fit verification. With an indicated accuracy of ±0.002 mm, the component supplies a level of dimensional stability suitable for fine inspection tasks where small deviations matter. This degree of accuracy reduces uncertainty in routine checks and assists in maintaining process tolerances across production runs. The nominal size 17.12 mm is presented as a fixed reference, simplifying comparative measurements against mating bores and plug gauges. The function of a gauge pin is to deliver a stable, repeatable datum rather than to perform multi‑feature measurement; this focus makes it a straightforward tool for tightening quality control limits. Built for repetitive handling in workshop conditions Engineered as a workshop execution, the item combines compact geometry with handling convenience: a length of 50 mm and a mass of approximately 0.15 kg allow easy placement into fixtures and measuring rigs. Constructed from special steel, the pin is intended for repeated seating and withdrawal in test setups, helping to preserve seating accuracy over many cycles. The short, controlled length supports stable clamping in holders and reduces the effects of bending or misalignment that can occur with longer pins. Where reliable seating and mechanical robustness are required, this execution offers a pragmatic balance between durability and dimensional fidelity. Integration into inspection processes and documentation Supplied as a single item, the component is identifiable by SKU M323.H12 and GTIN 4061905070716, which aids stock control and traceability within inspection workflows. As a standard reference element, the pin can be used in bench checks, fixture validation and as a quick verification tool during assembly or maintenance operations. Its clear nominal diameter and stated tolerance simplify decision‑making in pass/fail evaluations and support reproducible results when combined with fixed‑stop holders or gauge blocks. The focused specification reduces interpretative steps in measurement procedures and helps align inspection templates across similar production stations. For reliable end‑measurement checks with the Metav IndustryLine gauge pin M323.H12, contact Metav Werkzeuge in Emmerich for ordering and technical guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M323.H12 GTIN: 4061905070716 Manufacturer: Metav IndustryLine Facts Diameter: 17.12 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Version: Workshop execution Category: Gauge pins (Messstifte) Application: End measurements FAQ What tolerance can be expected from this test pin? The stated tolerance for the gauge pin is ±0.002 mm, which defines its suitability for fine inspection work and repeatable dimensional checks. Is this part supplied as a single item or in sets? The product is supplied as a single item under the SKU M323.H12, intended for immediate use in fixtures or as a spare reference element. Which applications is this gauge pin intended for? The pin is intended primarily for end measurements, fit verification and quick reference checks in workshop inspection and assembly processes. What material is used for the pin and what does that imply? The pin is made from special steel, offering a robust running surface for repeated seating and stable mechanical behaviour under normal workshop handling. How is the product identified for inventory and traceability? Identification is supported by GTIN 4061905070716 and SKU M323.H12, enabling straightforward integration into stock and inspection documentation systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.13mm Gauge Pin Single 50mm Length Workshop Finish - Metav IndustryLine
Reliable workshop inspection starts with a compact, purpose‑built pin: special steel construction, ±0.002 mm tolerance and a 50 mm shank length provide reproducible end‑measurement checks and stable handling; order via Metav Werkzeuge or consult the technical team for application guidance. Gauge pin 17.13 mm, 50 mm length (Metav IndustryLine) The Gauge pin 17.13 mm, 50 mm length is a single inspection pin designed for precise end‑measure verification and tight‑space checks in workshop and production settings. Workshop‑grade special steel construction Diameter 17.13 mm for end‑measure checks Tolerance ±0.002 mm for precise inspection Compact 50 mm shank for confined spaces High precision for repeatable inspection results The measuring pin delivers a ±0.002 mm tolerance, a level of accuracy suited to fine inspection tasks and quality control where small deviations matter. Such a tolerance means the pin can reliably confirm end dimensions and fits, reducing the need for destructive rework. The combination of tight nominal diameter control and a short, rigid shank minimises deflection during seating; this ensures that readings taken during plug‑style checks or alignment operations remain reproducible. The result is fewer rejected parts and a more predictable inspection routine. Robust design built for everyday workshop use Constructed from special steel and specified as a workshop version, the pin resists wear while keeping a compact footprint for use in jigs and fixtures. The 50 mm shank offers good accessibility in confined assemblies without sacrificing stiffness, making the item suitable for bench inspection and integration into manual gauging stations. The moderate mass supports stable seating in apertures and prevents excessive bounce when used for rapid go/no‑go checks, while the smooth finish reduces scoring on mating components. Practical application and handling guidance Designed for end‑measurement checks, the pin suits tasks such as reference probing, assembly verification and comparative gauging. Best practice is to store the pin in a clean environment and remove debris before each reference use to maintain the specified tolerance. When combined with calibrated length standards or digital readouts, the pin becomes part of a reliable inspection chain that documents conformity during incoming inspection or final checks. Traceability is supported by the provided identifiers and clear marking, so the component can be referenced in quality records and inspection plans. For procurement or to discuss how this Metav IndustryLine gauge pin can be integrated into existing inspection routines, contact Metav Werkzeuge in Emmerich for technical advice and delivery details at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.H13 GTIN: 4061905070723 Label: Gauge pin, single, 17.13 mm, 50 mm length Facts Length: 50 mm Diameter: 17.13 mm Tolerance/accuracy: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop execution Category: Gauge pins Application: End‑measurement checks FAQ What materials is the pin made from? The pin is manufactured from special steel, selected for wear resistance and dimensional stability in Metav IndustryLine gauge pins. What tolerance can be expected during inspection? Inspection and verification are performed to a tolerance of ±0.002 mm, which is typical for fine inspection pins used in workshop gauging. Is the pin suitable for tight or recessed holes? Yes, the 50 mm shank and compact form make the pin suitable for access to recessed or confined apertures during end‑measurement checks. How is traceability provided for this item? Traceability is supported by the article number (M323.H13) and GTIN (4061905070723), allowing clear reference in inspection records and inventory. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.14mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of precise dimensional control and robust workshop construction to reduce inspection time and rework. With a nominal diameter of 17.14 mm, a length of 50 mm and a verified positional accuracy of ±0.002 mm, this single gauge pin ensures reliable pass/fail checks and repeatable end‑measurement setups; order directly via Metav Werkzeuge or consult our specialists for batch enquiries. Gauge pin, single, 17.14 mm, length 50 mm (Metav IndustryLine) Gauge pin, single, 17.14 mm, length 50 mm is a precision cylindrical test pin designed for quick dimensional verification, reference plunging and end‑measure setups in workshop metrology. Workshop‑grade design Diameter 17.14 mm with ±0.002 mm accuracy Length 50 mm for versatile probing Made from special steel Consistent measurements that cut inspection time This cylindrical reference pin delivers a repeatable mechanical fit for go/no‑go checks and comparative gauging, thanks to a tight tolerance of ±0.002 mm. The clearly defined diameter of 17.14 mm reduces uncertainty when setting end faces or checking bore seating, meaning fewer ambiguous rejects and less downstream rework. For production environments where fast, measurable decisions are required, the reliable physical dimension of the test element speeds throughput while preserving traceability and process control. Durable construction for everyday workshop use Engineered as a workshop‑grade component, the pin is manufactured from special steel chosen for resistance to wear and stable surface finish under repeated contact. The 50 mm shank length provides secure engagement in pin holders and fixtures while remaining compact enough for handheld checks. At approximately 0.15 kg, the item balances mass and handling comfort, reducing operator fatigue during frequent routine checks. The robust material and finish extend service life and maintain dimensional integrity across repeated use. Simple integration into quality workflows Supplied as an individually identified test element (SKU M323.H14), the pin is suitable for rapid inventorying and process assignment within existing gauge stacks or dedicated fixtures. The product’s straightforward geometric form makes it compatible with standard collets, mandrels and holder systems used in workshop inspection benches. Clear labelling and a traceable GTIN help maintain audit trails and support quality documentation needs, facilitating consistent results in incoming inspection, in‑process checks and final verification. For workshop measurement reliability choose Metav IndustryLine gauge pins — contact Metav Werkzeuge for tailored advice or to place a production enquiry and ensure the correct specification for your process Technical data Article number: M323.H14 GTIN: 4061905070730 Manufacturer: Metav IndustryLine SKU: M323.H14 Facts Diameter: 17.14 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Version: Workshop execution Category: Gauge pin / test pin FAQ What measurement tasks is this pin suited for? The gauge pin is intended for dimensional verification, reference plunging and end‑measurement setups; the 17.14 mm diameter and ±0.002 mm accuracy are tailored to precise go/no‑go and seating checks. Is the pin compatible with standard holders and collets? Yes, the cylindrical geometry and 50 mm length make the pin compatible with common holders, mandrels and fixture systems used in workshop inspection benches. How is the item identified for traceability? The product is supplied with SKU M323.H14 and GTIN 4061905070730 to support inventory control and quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.15mm Test Pin, Single, 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of precision tolerance ±0.002 mm, robust special steel construction and a compact 50 mm length for reliable end‑size checks; order this gauge pin directly via Metav Werkzeuge or contact our consultants for application advice. Gauge pin, single – 17.15 mm dia, 50 mm length (Metav IndustryLine) The Gauge pin, single 17.15 mm is a workshop-grade test pin for fast, repeatable end‑size verification and fit checks in mechanical assembly and quality control. High-precision tolerance ±0.002 mm Diameter 17.15 mm for end‑size checks Hardened special steel, workshop grade Consistent end-size verification for production control A compact test pin of 17.15 mm diameter and 50 mm overall length provides a straightforward method for end‑size verification on shafts, bores and mating components. The defined tolerance of ±0.002 mm supports tight acceptance criteria and reduces the risk of assembly faults. In practice, the pin is used as a go/no‑go reference during incoming inspection or process control, delivering a rapid indication of conformity without complex setup. Design that supports repeatability and durability Manufactured from special steel and supplied in a workshop execution, the pin balances surface hardness with corrosion resistance to maintain dimensional stability over repeated use. The short, rigid geometry ensures minimal deflection during insertion, improving measurement repeatability compared with longer probe bodies. These characteristics translate into fewer rejects, shorter inspection cycles and more predictable production throughput. Practical handling, traceability and specification clarity At 0.15 kg and a 50 mm length, the pin is easy to handle on the shop floor and suitable for handheld checks or fixture integration. The product is identified by SKU M323.H15 and GTIN 4061905070747 for traceable procurement and stock control. The declared accuracy (±0.002 mm) is a clear specification for quality documentation and helps to align inspection limits with process capability data. For specialised metrology workflows, the simple geometry also eases cleaning and maintenance. For secure procurement and tailored advice on Metav IndustryLine gauge pins, contact Metav Werkzeuge for ordering support and application guidance. Technical data SKU: M323.H15 GTIN: 4061905070747 Label: Gauge pin, single, 17.15 mm diameter, 50 mm length Measurements Diameter: 17.15 mm Length: 50 mm Tolerance / accuracy variation: ±0.002 mm Weight: 0.15 kg Materials & features Material: special steel Version: workshop execution Category: gauge pin / test pin Intended use: end‑size verification and fit checks FAQ What is the declared accuracy of this gauge pin? The declared accuracy is ±0.002 mm, specified for the Metav IndustryLine gauge pin (SKU M323.H15) and intended to support strict tolerance inspections. Which material is used for the pin and how does it affect use? The pin is made of special steel; this material provides the hardness and wear resistance required for repeated workshop use while maintaining dimensional stability. Can this test pin be used for both shafts and bores? Yes, the geometry and surface finish of the gauge pin make it suitable for quick go/no‑go checks on shafts and matching bores as part of routine quality control. Is the product delivered with a calibration certificate? No calibration certificate is stated in the product data; calibration status is not indicated for this gauge pin, so calibration should be requested separately if traceable certification is required. How is the product identified for ordering and stock purposes? The gauge pin is listed under SKU M323.H15 and GTIN 4061905070747 for clear identification in procurement and inventory systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.16 mm Gauge Pin, Single, 50 mm Length, Workshop Version - Metav IndustryLine
Robust workshop performance and dependable inspection results arise from the combination of a workshop-grade design, Ø 17.16 mm nominal diameter and a tight ±0.002 mm tolerance; the 50 mm length keeps deflection low for repeatable checks and the item is supplied in a protective case. Order the gauge pin directly via Metav Werkzeuge or request advice from our consultants for application-specific guidance. Precision Gauge Pin M323.H16 — Ø 17.16 mm, 50 mm length (Metav IndustryLine) the Precision Gauge Pin M323.H16 serves as a single test pin for end-dimension inspection and fixture set‑up in workshop environments Workshop-grade construction Ø 17.16 mm nominal diameter Tolerance ±0.002 mm Supplied in protective case Consistent inspection through measured accuracy A tight ±0.002 mm tolerance delivers measurable confidence for routine dimensional checks and reduces downstream rework. Manufactured from special steel, the pin offers the hardness and surface finish necessary for reliable contact points; this combination supports repeatability when used for end‑dimension inspection or as a locating element in jig and fixture tasks. The calibrated geometry ensures a snug fit in bores and helps to standardise test routines, so process control is strengthened without complex setup. Designed for fixture alignment and quick verification The compact 50 mm length and the Ø 17.16 mm nominal size minimise bending moment while providing sufficient reach for most locating and verification tasks. As a single, workshop-oriented test pin, it simplifies fixture set‑up and spot checks on production lines, enabling faster cycle times and fewer measurement interruptions. The item’s balance of stiffness and manageable length makes it suitable for repeated insertion and withdrawal, supporting efficient quality routines in mechanical workshops and small-series production. Practical handling, transport and identification Delivered in a protective case, the pin is protected against transit damage and contamination, preserving its functional surface and dimensional integrity. The Metav IndustryLine designation signals availability through Metav Werkzeuge’s European distribution and quality filtering in Emmerich. Identification is straightforward: article number M323.H16 and GTIN ensure traceability within inventory systems, while the modest weight supports ease of handling during frequent use. Request tailored advice from Metav Werkzeuge to specify the right Metav IndustryLine gauge pins for precise fixture set‑up and inspection tasks — contact our specialists by phone or e‑mail for detailed information. Technical data Article number: M323.H16 GTIN: 4061905070754 Manufacturer: Metav IndustryLine Category: Gauge pin / Test pin Label: Precision Gauge Pin, single, Ø 17.16 mm, length 50 mm Facts Nominal diameter: 17.16 mm Length: 50 mm Dimensional tolerance: ±0.002 mm Weight: 0.15 kg Special features Workshop version (Werkstatt‑Ausführung) Material: special steel Supplied in protective case for transport Single test pin for end‑dimension inspection FAQ What is the nominal diameter and tolerance of the pin? The Precision Gauge Pin M323.H16 from Metav IndustryLine has a nominal diameter of 17.16 mm with a tolerance of ±0.002 mm, suitable for tight inspection tasks. Is the pin supplied ready for use in workshop environments? Yes, the workshop‑grade test pin is supplied in a protective case and manufactured from special steel, allowing immediate use for locating and verification in workshop settings. Can this pin be used for fixture set‑up and routine checks? The M323.H16 gauge pin is intended for fixture alignment and quick verification; its 50 mm length and reduced deflection provide reliable repeatability for such applications. How is the item identified for ordering and inventory? The article is listed as M323.H16 with GTIN 4061905070754, which supports clear identification in procurement and stock systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.17mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of high positional accuracy, robust special steel construction and a compact 50 mm length for reliable end‑measure checks in workshop environments. The measured tolerance of ±0.002 mm ensures repeatable reference measurements while the single‑item supply simplifies inventory. Order the gauge pin directly via Metav Werkzeuge or contact our consultants for application advice. M323.H17 gauge pin — 17.17 mm diameter, 50 mm length (Metav IndustryLine) The M323.H17 gauge pin is a workshop‑grade test pin designed for precise end‑measure verification and go/no‑go checking in inspection and jig set‑up tasks. Workshop-grade special steel construction Diameter 17.17 mm, length 50 mm Tolerance ±0.002 mm for tight checks Individual item, SKU M323.H17 Consistent accuracy for dependable quality control The pin provides a tolerance of ±0.002 mm, making it suitable for high‑precision comparative checks and dimensional verification where deviation allowances are minimal. Measured at a diameter of 17.17 mm and a working length of 50 mm, this hardened reference piece reduces uncertainty in fit and clearance inspections. Using a defined gauge pin as a reference minimises rework and improves process yield by ensuring components meet critical end‑measure specifications before assembly. Built for workshop handling and long service life Manufactured in special steel and specified as a workshop‑grade item, the pin balances surface finish and toughness for repeated use on the shop floor. Its compact form and modest mass (0.15 kg) make handling straightforward for single‑operator checks and for integration into gauge sets or fixtures. The construction allows secure seating in receptacles and test rigs, and the visible SKU aids stock control and fast identification during routine inspections. Fits smoothly into inspection workflows and traceability Delivered as an individual item with a clear product identity (SKU M323.H17, GTIN visible in the technical data), the pin is ready for immediate use in calibration benches and inspection sequences. Its repeatability characteristics support batch sampling and go/no‑go routines, and the compact geometry suits use with fixture plates and inspection jigs. The combination of dimensional stability and straightforward handling reduces downtime and streamlines quality documentation. For dependable end‑measure checks choose the Metav IndustryLine M323.H17 gauge pin; contact Metav Werkzeuge in Emmerich for technical advice and procurement guidance. Technical data Article number: M323.H17 SKU: M323.H17 GTIN: 4061905070761 Manufacturer: Metav IndustryLine Facts Diameter: 17.17 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Workshop version Material: Special steel Application: end‑measure checks Supplied as single item FAQ What tolerance does this gauge pin offer? The M323.H17 gauge pin from Metav IndustryLine is specified with a tolerance of ±0.002 mm, suitable for fine comparative checks and tight go/no‑go applications. What are the pin's exact dimensions? Diameter is 17.17 mm and overall length is 50 mm; these dimensions make it suitable for end‑measure verification and fixture seating. Is the item supplied individually or as part of a set? This product is supplied as an individual gauge pin with SKU M323.H17 for single‑piece use or selective inclusion in bespoke gauge sets. Which material is used for this gauge pin? The pin is made from a special steel formulation chosen for dimensional stability and workshop durability. How should the gauge pin be stored to retain accuracy? Keep the pin clean and dry, store in a protective tray or box to avoid knocks; regular inspection and, when necessary, recalibration ensure ongoing measurement reliability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.18mm Gauge Pin Length 50mm Workshop Finish, Special Steel - Metav IndustryLine
Take advantage of the combination of workshop-grade robustness, a precise 17.18 mm nominal diameter and a tight ±0.002 mm tolerance for repeatable end‑measure checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Precision gauge pin M323.H18 — 17.18 mm diameter, 50 mm length (Metav IndustryLine) The Precision gauge pin M323.H18 is a single test pin for accurate end‑measure verification and fixture alignment in workshop metrology, engineered for routine use and repeatable results. Workshop version for everyday industrial use Ø 17.18 mm nominal diameter 50 mm overall length for fixture checks Tolerance ±0.002 mm for high precision Reliable measurement where it matters The gauge pin delivers a consistently tight tolerance of ±0.002 mm, which translates into measurable reliability during set‑up and inspection tasks. Made for the shop floor, this test pin supports quick verification of bores and mating features: the nominal 17.18 mm diameter provides a stable reference, while the 50 mm length ensures sufficient engagement for many fixture and clamp geometries. By converting a dimensional specification into a reproducible physical reference, this component reduces rework and shortens set‑up time. Robust construction for workshop environments Manufactured from special steel, the component is finished as a workshop version to withstand regular handling and routine measurement cycles. The material choice maintains a wear‑resistant surface and preserves concentricity over repeated insertions. Delivered in a protective transport case, the pin arrives ready for storage and safe transit between inspection points, preventing damage and preserving the calibrated condition of the reference surface. Practical benefits for production and quality control Integrating this precision pin into inspection jigs or go/no‑go routines simplifies decision making: the defined diameter and tolerance enable clear pass/fail checks and support traceable set‑ups. The compact single‑piece design minimises handling complexity and speeds up gauging operations in medium‑volume production. For workshops seeking to stabilise process control with minimal investment, the pin offers an economical route to consistent measurements and reduced downtime. For supply and technical matching of Metav IndustryLine's M323.H18, contact Metav Werkzeuge for direct ordering and installation guidance Technical data SKU: M323.H18 GTIN: 4061905070778 Label: Precision gauge pin, single, 17.18 mm, length 50 mm Manufacturer: Metav IndustryLine Facts Nominal diameter: 17.18 mm Overall length: 50 mm Weight: 0.15 kg Tolerance / accuracy: ±0.002 mm Special features Material: special steel Workshop version Delivered in transport case Single test pin for end‑measure checks FAQ What is the nominal diameter and length of this gauge pin? The gauge pin has a nominal diameter of 17.18 mm and an overall length of 50 mm; these are the defining dimensions of the M323.H18. Is the M323.H18 suitable for routine workshop inspection? Yes. The M323.H18 is supplied in a workshop version made from special steel and packaged in a transport case for secure handling during everyday inspection tasks. What accuracy can be expected from this test pin? The test pin is specified with an accuracy of ±0.002 mm, enabling fine positional and end‑measure checks suited to production and quality control workflows. Can the gauge pin be used in fixture set‑up and go/no‑go checks? Absolutely. Its single‑piece design and precise nominal diameter make the pin suitable as a reference for fixture alignment and simple go/no‑go gauging routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.19mm Gauge Pin Single 50mm Length Workshop Version - Metav IndustryLine
Benefit from precise end‑measurement capability combined with robust special‑steel construction and a compact 50 mm body for measurements in confined assemblies. Order the test pin directly via Metav Werkzeuge or consult our specialists for application advice. M323.H19 test pin — 17.19 mm diameter, 50 mm length (Metav IndustryLine) The M323.H19 test pin is a workshop‑grade, single precision probe engineered for reliable end‑measurements in compact components and assembly fixtures. Workshop‑grade special‑steel construction Precise 17.19 mm diameter 50 mm length for confined or recessed measurements Accuracy that keeps production on target This probe delivers a consistently low measurement deviation with a declared tolerance of ±0.002 mm, making it suitable for fine end‑dimension checks and quality control operations where small deviations matter. The 17.19 mm nominal diameter is ground to high fidelity and combined with the hardened special steel body this results in repeatable seating against datum faces and gauges. The obvious benefit is fewer scrapped parts and shorter inspection cycles when integrated into routine checks or fixture verification. Compact form for machines and tight spaces With an overall length of 50 mm and a compact shaft, the component is classified within the Mikro range for calipers and inspection probes, offering the best balance between reach and rigidity for small assemblies. The short form factor reduces bending and improves handling in confined bores or recessed surfaces, so end‑measurements on housings, sleeves or precision dowels can be completed without ancillary extensions. The compact design also simplifies storage and transport within workshop tool sets. Built for workshop use and straightforward handling The workshop execution is reflected in the choice of special steel and a practical overall mass that supports stable manual placement. Supplied in a transport box, the pin is protected during storage and transit and is ready to be integrated into gauge blocks, test fixtures or comparative setups. The robust construction reduces the need for frequent replacements, while the clear numerical tolerance supports traceable inspection protocols and consistent results across production runs. For repeatable end‑measurements choose the Metav IndustryLine M323.H19 test pin — contact Metav Werkzeuge in Emmerich for procurement or technical clarification: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: M323.H19 GTIN: 4061905071478 Manufacturer: Metav IndustryLine Facts Diameter: 17.19 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Special features Material: Special steel Design: Workshop execution Delivery: Supplied in transport box Category: Messstifte Application: End measurements FAQ What level of accuracy does this test pin provide? The M323.H19 test pin is specified with a tolerance of ±0.002 mm, suitable for fine end‑dimension checks in precision workshops. Is the pin suitable for confined bores and recessed measurements? Yes, the 50 mm overall length and compact shaft geometry make the probe appropriate for confined or recessed measurement situations. What material is the probe made from and why does that matter? The probe is manufactured from special steel, providing hardness and wear resistance for repeated contact with datum faces in a workshop environment. How is the product delivered and protected during transport? The probe is supplied in a transport box to protect the finished surfaces and maintain measurement integrity until installation. Can the test pin be used in fixture or gauge applications? The M323.H19 probe is suited to fixture and gauge use where precise end measurements and repeatability are required Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com