Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
100mm Vertical Clamp With Safety Lock, 1.5kN Thrust, 5kN Hold Force, Blackened - Kukamet
Take advantage of the combination of compact design, high retention force and a secure safety lock to speed up fixture cycles without compromising on workplace safety. Order the clamp direct from Metav Werkzeuge or consult our specialists for application advice. Vertikalspanner 242 – Vertical toggle clamp with safety lock, 1,500 N clamping force (Kukamet) The Vertikalspanner 242 is a vertical toggle clamp designed for secure, repeatable holding in jig and fixture applications across metalworking and assembly stations Vertical base foot for stable mounting Safety lock prevents unintended release 1,500 N clamping force for firm hold Holds up to 5,000 N retention force Consistent holding power for production environments The clamp delivers a clear performance advantage through its 1,500 N rated clamping capability combined with a 5,000 N maximum retention force. This ratio of clamping to holding force provides a secure grip on parts during machining or assembly, reducing rework and stoppages. The mechanism locks positively, so the safety lock maintains engagement under vibration and intermittent loads. For production planners the result is a measurable improvement in process stability and fewer manual interventions. Robust construction that speeds up cycle times A compact, blackened finish body and a vertical base mounting allow rapid integration into existing fixtures while offering corrosion-resistant surface protection. The lever-driven action of this type of clamp shortens the motion path, enabling quicker part securing and release compared with multi-component systems. At a lightweight 1.47 kg the unit is easy to position during jig building yet substantial enough to withstand repeated cycles, supporting higher throughput without adding bulk to the fixture. Safety and installation advantages for workshop fixtures Designed as a classic lever clamp, the device opens to a 100° travel angle, giving good access for loading and unloading components while maintaining a compact footprint. The integrated safety lock prevents accidental opening, which is beneficial where unattended machines or automated feeders are in use. Clear mechanical behaviour and straightforward mounting on a vertical foot make it suitable for clamping, assembly and testing fixtures where repeatability and operator safety are priorities. The model is supplied as a single, ready-to-install clamp with a defined SKU for traceability. Contact Metav Werkzeuge for tailored technical advice and to specify the Kukamet Vertikalspanner 242 (SKU 242-4-L) for reliable fixture integration in your workshop Technical data Article number: 242-4-L GTIN: 8680731505696 SKU: 242-4-L Facts Weight: 1.47 kg Max clamping force: 1,500 N Max holding force: 5,000 N Angle: 100° Special features Material: blackened finish Mounting: vertical base foot Safety lock: yes Category: Spanner eClass: 21041717 ETIM: EC011973 FAQ What is the primary application for this vertical clamp? The Vertikalspanner 242 from Kukamet is intended for use in jigs, fixtures and assembly fixtures where secure, repeatable clamping and compact mounting are required. Can the clamp be mounted on production fixtures with limited space? Yes. The vertical base foot and compact design of the Vertikalspanner 242 (SKU 242-4-L) allow straightforward installation in confined fixture layouts. How does the safety lock improve workshop safety? The integrated safety lock prevents unintended release under vibration or incidental impact, so the clamp keeps a positive hold until deliberately released. Is the lever action suitable for high-cycle automation? The lever-driven mechanism offers short actuation and reliable engagement, making this model suitable for higher cycle rates in manual or semi-automated processes. What finish does the clamp have and what does it mean for maintenance? The unit features a blackened finish that provides basic surface protection; this reduces the need for frequent touch-up while supporting standard workshop maintenance routines. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertical Clamp 2,500 N Zinc-Plated Vertical Hold-Down Clamp - Kukamet
Take advantage of reliable 2,500 N clamping force and a compact, low-weight design to secure workpieces efficiently in jigs and assemblies; the horizontal foot allows stable mounting while the toggle action delivers repeatable pressure for production use. Order the vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. Vertical clamp 221 — Kukamet vertical toggle clamp with 2,500 N force and horizontal foot Vertical clamp 221 provides secure vertical clamping for assembly, welding and fixture applications where reliable, repeatable holding is required 2,500 N maximum clamping force Horizontal foot for stable mounting Compact design, low weight 0.24 kg Boosted throughput with dependable clamping performance The 2,500 N maximum clamping force of this toggle device ensures secure workpiece retention under repeated cycles, reducing stoppages and rework. The vertical toggle mechanism converts a short manual lever travel into a high holding force, which is especially useful for assembly and fixturing tasks where consistent pressure is essential. The robust action of the clamp offers measurable productivity advantages in serial operations while remaining straightforward to integrate into existing jigs. Easy integration and compact fixture design Weighing just 0.24 kg, the component is intentionally compact to keep fixture mass low and simplify handling during installation. The horizontal foot enables a stable, low-profile mounting on standard plates or rails and reduces the need for elaborate subframes. For engineers planning fixture layouts, this means less material, faster set-up and a smaller footprint on the assembly bench without sacrificing holding capability. Versatile toggle action and practical geometry The clamp provides a generous 120° opening angle, offering an extended range for part insertion and removal while maintaining firm clamping at the end of travel. The toggle action delivers a positive mechanical lock when closed, which prevents creep under vibration or thermal load. This makes the device appropriate for light-to-medium industrial applications where repeatable positioning and resistance to accidental release are priorities. For reliable toggle clamping with 2,500 N force, request Kukamet’s Vertical clamp 221 through Metav Werkzeuge — technical advice and ordering assistance are available from Metav Werkzeuge via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data SKU: 221-2 GTIN: 8682843520352 Manufacturer: Kukamet Core technical data Clamping force: 2,500 N Weight: 0.24 kg Opening angle: 120° Mounting: horizontal foot ECLASS: 21041717 ETIM: EC011973 Special features Toggle (lever) clamp action Compact, low-mass design No special additional features specified FAQ What is the maximum holding force of this clamp? The clamp delivers a maximum clamping force of 2,500 N, which provides secure retention for many assembly and fixture tasks when used as intended. How is the clamp mounted in a fixture? Mounting is via a horizontal foot, allowing the clamp to be fixed to plates or fixture bases for stable installation in jigs and assemblies. Is the opening range suitable for larger parts? The device offers a 120° opening angle, giving an extended insertion range that supports workpieces with moderate height before clamping. How heavy is the clamp and what does that mean for fixture design? At 0.24 kg the clamp is lightweight, simplifying fixture balancing and reducing the need for heavy support structures while enabling swift manual handling during assembly. Can this clamp resist vibration and accidental release? Yes; the toggle mechanism provides a positive mechanical lock in the closed position, increasing resistance to vibration and accidental opening during operation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Kukamet 66mm Extension Lever Metal - Kukamet
Take advantage of the compact metal design and minimal weight to extend reach and improve leverage in lever-clamping setups; order the part via Metav Werkzeuge or ask the technical team for compatibility advice. Extension lever 220 — metal accessory for lever clamps (Kukamet) The Extension lever 220 is a compact metal accessory designed to extend the handle of lever clamps and support precise clamping in fixtures and jigs. Solid metal construction Compact dimensions 66 × 11 × 5 mm Lightweight at 0.025 kg Compatible with lever clamps Built for dependable clamping performance The extension is produced in robust metal, providing a stiff and wear-resistant interface that preserves clamping accuracy under repeated operation. By increasing lever length in a controlled manner, the component improves mechanical advantage and enables the same clamping force with reduced operator effort. The simple geometry minimises stress concentrations and supports a consistent contact point, which is beneficial for repeatable positioning and longer tool life. Fits into existing fixtures with minimal adjustment With compact dimensions of 66 × 11 × 5 mm and a lightweight profile of 0.025 kg, the Extension lever 220 integrates into jigs and toggle-clamp assemblies without significantly affecting balance or cycle dynamics. The small footprint allows close mounting to toggle mechanisms and reduces interference in confined workstations. If uncertainty about fitment exists, Metav’s technical advisers can review compatibility with specific clamp models and fixture layouts. Reliable sourcing and workshop-ready supply Sourcing this Kukamet accessory through Metav ensures access to a curated supply chain and consistent part quality. Metav combines a broad product range with central stock management from Emmerich, supporting stable delivery for production and maintenance needs. The combination of Kukamet engineering and Metav’s distribution helps reduce downtime and simplifies procurement for workshops and industrial buyers seeking dependable clamping components. Contact Metav Werkzeuge to request compatibility details or to source the Kukamet Extension lever 220 for reliable clamping upgrades — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 220-2-06 GTIN: 4061905074882 Brand: Kukamet Facts Dimensions: 66 × 11 × 5 mm Weight: 0.025 kg ECLASS: 21170613 Special features Material: metal Category: spanner / clamping accessory Suitable for lever clamps and toggle-clamp applications FAQ What is the primary application of this extension lever? The extension lever is intended as a handle extension for lever clamps and toggle-clamp fixtures, providing increased reach and leverage for clamping tasks with the Kukamet accessory (SKU 220-2-06). What are the exact dimensions and weight? Dimensions are 66 × 11 × 5 mm and the weight is 0.025 kg, which keeps added mass to a minimum while extending handle reach. Which material is used for the lever? The part is manufactured from metal, selected for its stiffness and wear resistance suited to repetitive clamping operations. Is the component compatible with standard lever clamps? Yes, the design is compatible with lever clamps and toggle mechanisms; Metav can confirm fitment against specific clamp models where required. Can this lever be used in compact fixtures with limited clearance? The compact footprint and low weight make it suitable for confined jigs and fixtures where space and balance are important. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
70° Pneumatic Clamp Heavy Duty Without Handle, Horizontal Base Modular Piston, 1,600 N Thrust - Kukamet
Take advantage of a combination of robust clamping force, compact installation options and a corrosion-resistant finish for reliable cycle times in production environments. Order the Kukamet Pneumatikspanner directly via Metav Werkzeuge or ask Metav's consultants for application advice. Kukamet Pneumatikspanner – heavy-duty pneumatic clamp with horizontal foot and modular piston The Pneumatikspanner is a heavy-duty pneumatic clamp designed for industrial workholding and automated fixturing in production and assembly lines. Heavy-duty pneumatic clamping 1,600 N Holding force up to 5,600 N Horizontal foot, modular piston mount Black blued finish for corrosion resistance Consistent clamping performance that reduces rework The clamp delivers a defined actuation force of 1,600 N and a holding force of 5,600 N, providing reproducible workpiece fixation that helps to reduce rejects and rework. Repeatability is achieved through the pneumatic piston design and the robust construction, which together ensure consistent stroke behaviour under cyclical loads. This level of force control is particularly beneficial for machining, welding and assembly operations where fixture stability directly affects part quality. The compact mass of the unit contributes to minimal inertial effects during rapid cycling. Compact mounting and low-maintenance operation for automated lines Designed with a horizontal foot and a modular piston mounting, the device is suitable for tight fixture layouts and straightforward integration into automated tooling. The black blued finish improves surface durability and provides basic corrosion protection in workshop environments. The spanner is supplied without a handle, a deliberate choice that favours machine-vision access and prevents accidental interference in automated cells. Service requirements are limited to routine pneumatic and seal checks; the simple mechanical layout facilitates quick replacement of wear components where needed. Improved throughput and safe handling for industrial workflows By shortening clamp cycle times and providing secure locking, the unit contributes directly to higher throughput and reduced operator handling time. Secure fixation lowers the risk of workpiece movement during machining, improving tool life and dimensional accuracy. The Pneumatikspanner's heavy-duty version and robust finish make it appropriate for continuous use in demanding production settings; documentation and dimensional data support rapid integration into existing fixtures. For further technical matching to specific machines or fixtures, Metav's technical consultants can supply supplementary data and engineering guidance. Contact Metav Werkzeuge for tailored integration advice and reliable supply of the Kukamet Pneumatikspanner (SKU 683-4) from Emmerich. Technical data Article number: 683-4 GTIN: 8682843521731 Manufacturer: Kukamet Facts Max actuation force: 1,600 N Max holding force: 5,600 N Weight: 4.9 kg Angle: 70° eCl@ss: 21021004 ETIM: EC011973 Special features Mounting: horizontal foot, modular with piston Finish: black blued Design: heavy-duty version Feature: supplied without handle FAQ What is the maximum clamping force of this pneumatic clamp? The Kukamet Pneumatikspanner offers an actuation force of 1,600 N and a holding force up to 5,600 N (SKU 683-4). Can the clamp be integrated into automated fixtures? Yes, the horizontal foot and modular piston design permit compact integration into automated tooling and production cells. What surface treatment does the spanner have? The unit is supplied with a black blued finish, providing improved surface durability and basic corrosion resistance. Is a handle included with the clamp? No, the Kukamet Pneumatikspanner is supplied without a handle to facilitate automation and avoid accidental interference. What information is available for CAD integration? Dimensional and technical data are provided for the Kukamet Pneumatikspanner (683-4); Metav can supply further drawings on request. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
14mm Push Rod Clamp Horizontal Foot 7,000 N Push Force, 11,000 N Hold Force, Zinc Coated Cast Body - Kukamet
Take advantage of the combination of robust holding force, compact weight and corrosion-resistant construction for efficient, reliable clamping in production and assembly. Order the Kukamet 533 push-rod clamp directly via Metav Werkzeuge or ask the consultants for application advice. Kukamet 533 Push-rod clamp — horizontal-foot mounting, galvanised cast body Kukamet 533 Push-rod clamp designed for secure fixture and repeatable clamping in workshop and light industrial applications 7,000 N pressing force 11,000 N holding force Galvanised cast-body construction Horizontal-foot mounting, M8x50 spindle Reliable clamping where consistent force matters The construction delivers a defined 7,000 N maximum pressing capacity and a 11,000 N maximum holding capability, enabling secure fixation for common assembly and machining tasks. The force figures are stated as measurable values to aid selection for specific processes; they support decisions where consistent clamping force reduces rework and improves cycle reproducibility. The device’s compact nature and measured weight contribute to straightforward fixture design and lower dynamic loads during automated sequences. Durable design that reduces downtime Manufactured with a galvanised finish and a cast body, the unit resists corrosion and mechanical wear in demanding shop-floor environments. The choice of materials ensures longevity under frequent use, which in turn reduces replacement intervals and maintenance effort. The pressure spindle specified as M8x50 allows simple integration into existing fixtures while keeping the mechanism accessible for routine inspection and lubrication, helping maintain performance with minimal service input. Fast and precise installation for production efficiency The horizontal-foot mounting offers a stable base for panel or fixture attachment and simplifies alignment during installation. With a 14 mm piston diameter and an overall mass of 0.84 kg, the component balances compactness with sufficient mechanical leverage, allowing designers to position clamps close to the workpiece without excessive support structures. Clear numeric specifications enable planners to model clamping loads and safety margins in CAD or calculation sheets, supporting efficient process planning and safer operations. Contact Metav Werkzeuge for procurement and technical guidance on the Kukamet 533 push-rod clamp; order from our Emmerich stock or request application advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 533-4-Q14 GTIN: 8680731506129 Designation: Push-rod clamp 533 Category: Spanner (clamp) Manufacturer: Kukamet Facts Max pressing force: 7,000 N Max holding force: 11,000 N Piston diameter: 14 mm Weight: 0.84 kg Pressure spindle: M8x50 ECLASS: 21041716 ETIM: EC011973 Special features Material: galvanised with cast body Mounting: horizontal foot Application: fixture and clamping tasks in workshop or light industrial settings Compact design for close-proximity mounting FAQ How much clamping force does the device provide? The Kukamet 533 push-rod clamp is specified with a maximum pressing force of 7,000 N and a holding capacity up to 11,000 N, values that support secure fixation in many assembly and machining operations. Which mounting arrangement is required? This clamp uses a horizontal-foot mounting, allowing straightforward attachment to flat fixture plates or jigs; the horizontal-foot design assists in stable alignment. What material and finish are used for durability? The body is cast and galvanised, providing corrosion resistance and robust mechanical behaviour suitable for frequent use on the shop floor. Is the spindle standardised for easy replacement or adjustment? The pressure spindle is specified as M8x50, a common dimension that simplifies replacement and integration into existing fixtures. What are the key dimensions relevant for fixture design? Key measurable values include a piston diameter of 14 mm and a total weight of 0.84 kg; these figures support load calculations and spatial planning. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1200 N Pneumatic Clamp Horizontal Base 95° Swing, Zinc-Plated, 1400 N Holding Force - Kukamet
Reliable, compact clamping with a 1,200 N pneumatic actuation and a zinc-plated finish delivers consistent holds and long service life, supporting steady production cycles and reduced setup times. Order the Pneumatic clamp 611 directly via Metav Werkzeuge or ask our consultants if needed. Pneumatic clamp 611 — Kukamet · 1.2 kN actuation · horizontal-foot mounting A Pneumatic clamp 611 designed for secure workpiece clamping in production and workshop settings, combining controlled pneumatic actuation with a corrosion-resistant finish and a compact horizontal-foot mount. Max. clamping force 1,200 N Holding force up to 1,400 N Zinc-plated corrosion resistance Horizontal-foot mounting, 95° angle Consistent actuation for predictable cycle times The pneumatic drive delivers a controlled actuation of 1,200 N, providing a repeatable closing movement that reduces variation between cycles and minimises manual adjustment. With a separate holding force of 1,400 N, the device secures parts reliably once clamped, which helps to prevent slippage during machining or assembly. The clear separation of actuation and holding values makes performance easy to specify for jigs and fixtures, supporting process planning and quality assurance in series production. Durable finish and compact installation save space A zinc-plated finish provides corrosion protection appropriate for workshop environments, while the low mass (approx. 0.535 kg) keeps the clamp compact and easy to integrate into fixtures. The horizontal-foot mounting with a 95° angle allows direct attachment to plates or subframes and supports low-profile installations where clearance is limited. These design choices reduce the need for additional brackets and simplify retrofits, lowering installation time and material handling effort. Seamless integration into clamping systems and fixtures Engineered for fixture-level use, the clamp is compatible with standard clamping arrangements and can be arranged in arrays for multi-station jigs. The compact pneumatic actuator allows straightforward connection to existing compressed-air supplies, enabling controlled operation without extensive electrical integration. Identification by SKU and GTIN supports inventory management and procurement tracking for production planners and purchasers seeking reproducible component sourcing. For tailored advice on integrating the Kukamet Pneumatic clamp 611 into workshop fixtures, contact Metav Werkzeuge for delivery from Emmerich and expert consultation at +49 2822 7131930 or info@metav-werkzeuge.com Technical data SKU: 611-2 GTIN: 8680731502893 Article designation: Pneumatic clamp / 611 Manufacturer: Kukamet Facts Max. actuation force: 1,200 N Max. holding force: 1,400 N Weight: 0.535 kg Angle: 95° Special features Zinc-plated finish Horizontal-foot mounting Mounting type: waagerechter Fuß Category: Clamps eCl@ss: 21021004 ETIM: EC011973 FAQ What clamping and holding forces does the clamp provide? The Kukamet Pneumatic clamp 611 offers a maximum actuation force of 1,200 N and a holding force of 1,400 N, values intended for reliable part retention in fixtures. How is the clamp mounted to a fixture? Mounting is via a horizontal foot (waagerechter Fuß); the clamp’s design and 95° angle suit low-profile attachment to plates and subframes. Is the surface finish suitable for workshop environments? The clamp features a zinc-plated finish, providing corrosion resistance suitable for typical production and workshop conditions. How compact is the device for multi-station fixtures? With a weight of approximately 0.535 kg and a compact actuator, the clamp is well suited for installation in arrays or confined fixture spaces. Can the clamp be integrated into existing pneumatic systems? Yes; the clamp’s pneumatic actuation is designed for straightforward connection to standard compressed-air supplies and can be incorporated into existing clamping circuits. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
120° Vertical Clamp Horizontal Foot 1.5 kN Thrust, 5 kN Hold, Blackened Steel - Kukamet
Secure production with robust 5,000 N holding force, compact installation and a low weight for quick machine integration. Benefit from the lever-operated design and corrosion-resistant surface; order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Vertical clamp 225 — lever-operated vertical hold-down, 5,000 N holding force (Kukamet) The Vertical clamp 225 is a lever-operated vertical hold-down designed for fixture, assembly and light industrial clamping, mounted via a horizontal foot for stable positioning 5,000 N maximum holding force 1,500 N clamping force capacity Horizontal-foot for stable mounting Blackened finish for corrosion resistance Performance that keeps production moving The lever-operated design delivers a clear mix of force and speed: 5,000 N maximum holding force with a 1,500 N pressing capacity provides secure retention for repetitive operations. Short actuation travel reduces cycle time and improves throughput, while the lever-operated mechanism ensures immediate, audible engagement for visual confirmation of a locked state. This combination of measurable force and quick action supports efficient jigs and fixtures, translating technical values directly into operational reliability. Compact mounting and durable surface for workshop use A horizontal foot allows direct fastening to plates or fixture bases, giving a low-profile attachment that saves vertical space and simplifies fixture layouts. The body is finished with a blackened finish that offers enhanced corrosion resistance compared with bare steel, maintaining appearance and function in busy workshop environments. With an engagement angle of 120° and a net mass of 1.12 kg, the unit is easy to integrate into existing tooling while remaining sufficiently robust for daily use. Repeatable clamping that supports quality and safety The 225 model provides repeatable locking force for consistent part positioning, improving process stability and reducing rework. The lever action offers positive mechanical locking and a clear locked position which aids operator safety and process control. Fewer moving parts mean straightforward maintenance and long service intervals, supporting uninterrupted production and predictable performance in small-series production or manual assembly stations. Request the Kukamet Vertical clamp 225 from Metav Werkzeuge for reliable 5,000 N holding in a compact package; contact Metav Werkzeuge for ordering and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 225-4 GTIN: 8680731502619 Brand: Kukamet ECLASS: 21041717 ETIM: EC011973 Facts Holding force: 5,000 N Clamping (pressing) force: 1,500 N Angle: 120° Weight: 1.12 kg Design and special features Horizontal foot mounting Blackened finish Lever-operated hold-down Compact vertical clamping orientation FAQ What holding force and clamping force does this clamp provide? The Kukamet vertical clamp 225 (SKU 225-4) delivers a maximum holding force of 5,000 N and a clamping (pressing) force of 1,500 N. How is the clamp mounted? Mounting is via a horizontal foot; the vertical orientation is designed for secure attachment to fixture plates and bases. What is the engagement angle of the clamping arm? The clamping arm engages at an angle of 120° for the specified locking geometry. What is the surface finish and weight of the unit? The unit has a blackened finish for corrosion resistance and weighs 1.12 kg. Under which classification codes is this product listed? The product is listed under ECLASS 21041717 and ETIM EC011973 Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
12mm Pneumatic Plunger Clamp 1,500N Push Force, 3,700N Holding Force, Zinc Cast Body - Kukamet
The combination of a zinc‑plated cast body, dependable 1,500 N thrust and high 3,700 N holding force delivers secure, repeatable clamping for assembly and machining fixtures; the compact 1.09 kg design keeps integration effort low. Order the Pneumatic Push‑rod Clamp 673 directly via Metav Werkzeuge or ask our consultants if needed. Pneumatic Push‑rod Clamp 673 — Zinc‑plated cast body, 1,500 N thrust (Kukamet) The Pneumatic Push‑rod Clamp 673 is a compact pneumatic clamping solution for production lines, jigs and repeatable fixture applications. Zinc‑plated cast body for industrial durability 1,500 N thrust with quick pneumatic actuation 3,700 N maximum holding force for secure clamping Horizontal foot mounting, 12 mm piston diameter Consistent clamping force for reliable throughput The actuator delivers a controlled 1,500 N thrust combined with a 3,700 N holding force, ensuring that workpieces remain fixed even under machining loads. By separating the pushing and holding metrics, the design provides predictable performance: thrust initiates the clamping stroke while holding force resists movement during processing. For production planners this means fewer rejects and reduced rework, as fixture repeatability improves cycle‑to‑cycle. The mechanism is suitable for frequent cycling thanks to pneumatic actuation that reduces manual effort and increases process speed. Robust construction that simplifies installation Built with a zinc‑plated cast body, the unit resists workshop wear and offers corrosion protection in standard industrial environments. The horizontal foot mounting enables straightforward attachment to fixed plates or modular fixture systems, keeping the clamp’s centre of gravity low for stable assemblies. At 1.09 kg, the component is lightweight enough to position easily yet substantial enough to absorb dynamic loads. The 12 mm piston diameter provides a compact actuator profile without sacrificing force output, allowing integration into confined fixture areas where space is at a premium. Practical advantages for workshops and fixture builders Designed for repetitive operations, the clamp supports automated and semi‑automated workflows by offering quick engagement and disengagement through pneumatic control. The compact actuator reduces the need for large valve banks and, when combined with standard compressed air systems, lowers installation complexity. The mechanical simplicity translates to low service requirements and long operational life under regular maintenance intervals. For engineers specifying clamps for jigs or assembly stations, the unit’s predictable metrics and straightforward mounting reduce engineering time and improve uptime. For reliable supply and technical advice on Kukamet clamping solutions, contact Metav Werkzeuge in Emmerich for tailored consultation and prompt delivery of the Pneumatic Push‑rod Clamp 673. Technical data Article number: 673-3-Q12 SKU: 673-3-Q12 GTIN: 8682843521700 Manufacturer: Kukamet ECLASS: 21041716 ETIM: EC011973 Facts Maximum thrust: 1,500 N Maximum holding force: 3,700 N Piston diameter: 12 mm Weight: 1.09 kg Special features Material: zinc‑plated with cast body Mounting: horizontal foot Category: Spanner UID: 673-3-Q12 FAQ What clamping force can be expected from this pneumatic clamp? The Pneumatic Push‑rod Clamp 673 provides a maximum thrust of 1,500 N and a holding force of 3,700 N, allowing secure positioning during machining and assembly. Is the clamp suitable for fixture integration in small spaces? Yes, the compact actuator with a 12 mm piston diameter and moderate weight of 1.09 kg permits installation in confined fixture arrangements and modular clamping systems. What material and surface treatment does the clamp have? The clamp features a zinc‑plated cast body, offering mechanical strength and corrosion resistance for standard industrial environments. Which SKU identifies this model for ordering and spare parts? The product is listed under SKU 673-3-Q12 (GTIN: 8682843521700) for procurement and parts ordering. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
12mm Pneumatic Pushrod Clamp 1.5kN Thrust, Zinc-Plated Horizontal Foot - Kukamet
Take advantage of the combination of robust clamping performance and corrosion-resistant construction to secure fixtures reliably in serial production or workshop jigs. Benefit from a compact, lightweight design together with clear technical data for straightforward integration — order the clamp directly via Metav Werkzeuge or ask our consultants for application advice. 661 Pneumatic Push-Rod Clamp by Kukamet — galvanised, 1,500 N thrust 661 is a compact pneumatic push-rod clamp designed for workshop and industrial fixtures, offering fast actuation and stable horizontal-foot mounting for repeatable clamping tasks Galvanised corrosion protection 1,500 N pneumatic thrust 2,960 N maximum holding force Horizontal-foot mounting stability Reliable power where it matters The clamp delivers a maximum piston thrust of 1,500 N, supported by a peak holding capacity of 2,960 N, which makes it suitable for medium-duty clamping in production jigs and assembly fixtures. The device’s 12 mm piston diameter is specified to clarify actuation geometry; piston size and supplied air pressure together determine force output, providing a predictable relationship between supply conditions and clamping performance. The galvanised surface ensures resistance to workshop contaminants and damp environments, helping to maintain consistent force transmission over time. Compact installation and durable construction With a weight of just 0.88 kg and a horizontal-foot mounting arrangement, the unit is designed for easy integration into existing fixture plates and conveyor-mounted stations. The galvanised construction reduces corrosion risk without the need for regular surface treatment, lowering maintenance intervals. The low mass minimises additional load on moving fixtures and enables quicker cycle times in automated sequences, while the horizontal foot offers a secure, repeatable attachment point for alignment-critical applications. Ready for fixture integration and series use The design emphasises straightforward compatibility with standard clamping layouts: the compact housing and clear force figures simplify layout calculations for jigs and automated systems. The clamp is appropriate for batch production, inspection fixtures and assembly lines where reproducible clamping and short cycle times are required. Technical documentation and dimension sheets are available to support integration; custom advice can be provided for adapting the device to specific pneumatic controls or manifold systems. Contact Metav Werkzeuge for tailored fixture recommendations and to arrange supply of the Kukamet 661 via the Emmerich team by email or phone Technical Data SKU: 661-3-Q12 GTIN: 8680731503111 Manufacturer: Kukamet Facts Weight: 0.88 kg Piston diameter: 12 mm Max thrust (druckkraft): 1,500 N Max holding force (haltekraft): 2,960 N Special features Material/finish: galvanised Mounting: horizontal foot Category: Spanner Classification: eClass 21041716, ETIM EC011973 FAQ What clamping force can be expected from this pneumatic device? The Kukamet 661 provides a piston thrust of up to 1,500 N and a maximum holding force of 2,960 N, suitable for medium-duty clamping in jigs and fixtures. Is the clamp suitable for humid or workshop environments? Yes, the galvanised finish on the 661 offers corrosion resistance that helps maintain function in typical workshop or damp conditions. How is the clamp mounted in a fixture? The unit uses a horizontal-foot mounting configuration, allowing stable attachment to fixture plates and alignment with linear or rotary tooling. What are the key dimensions relevant for integration? Piston diameter is 12 mm and the overall unit is lightweight at 0.88 kg; detailed dimension sheets are available to support exact layout planning. Can the clamp be used in automated assembly lines? The compact design and clear force specifications make the clamp suitable for integration into automated systems, where repeatable actuation and low inertial load are required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
12mm Pneumatic Push‑Rod Clamp 1.5kN Push Force, Zinc-Plated, 0.88kg - Kukamet
Take advantage of the combination of robust pneumatic actuation, a compact 12 mm piston and high holding force for dependable fixture clamping. Order the clamp directly via Metav Werkzeuge or consult their specialists for integration advice and delivery from Emmerich. Pneumatic Pushrod Clamp 662 — zinc-plated, 12 mm piston (Kukamet) The Pneumatic Pushrod Clamp 662 is a compact clamping solution designed for horizontal mounting in production fixtures and jigs, offering fast pneumatic actuation and corrosion-resistant zinc plating. Pneumatic actuation with quick response Zinc-plated for corrosion resistance High holding force up to 2,960 N Engineered for dependable fixture clamping The clamp delivers a defined push force of 1,500 N and a holding force of 2,960 N, values that translate into secure workpiece retention for many routine machining and assembly tasks. Pneumatic actuation means the device operates with compressed air and provides a concise linear movement via a 12 mm piston, a specification that balances stroke control and compactness. For purchasers unfamiliar with actuator terminology: push force refers to the force applied during the active clamping motion, while holding force indicates the residual resistance the clamp provides once engaged. The zinc-plated finish increases service life in workshop environments where moisture or cutting fluids are present. Easy integration into production jigs and fixtures A horizontal foot mounting simplifies installation on plates and fixture bases, enabling rapid placement without elaborate adapters. At around 0.88 kg, the actuator remains light enough to be used in modular tooling while retaining the mechanical stability expected in industrial settings. The compact format and consistent actuation make it suitable for semi-automated stations and manual fixtures alike, reducing changeover time and contributing to improved cycle efficiency. The combination of quick pneumatic response and a defined holding specification supports repeatable clamping sequences and less rework. Proven supply and workshop support for long-term use Manufactured by Kukamet and distributed through Metav Werkzeuge, the unit benefits from a reliable supply chain and product range focused on practical workshop requirements. Metav’s role as a precision partner means access to comprehensive assortments and parts, ensuring compatibility across fixtures and replacement cycles. Choosing this clamp supports a pragmatic purchasing strategy: robust component selection, straightforward mounting, and straightforward technical data to aid specification in tender documents or CAD layouts. The product’s straightforward design also facilitates routine inspection and predictable maintenance intervals. For expert advice on fixture design or to arrange delivery of the Kukamet Pneumatic Pushrod Clamp 662 via Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored technical guidance and prompt supply. Technical Data Article number: 662-3-Q12 GTIN: 8680731505931 eClass: 21041716 ETIM: EC011973 Facts Maximum push force: 1,500 N Maximum holding force: 2,960 N Piston diameter: 12 mm Weight: 0.88 kg SKU: 662-3-Q12 Special features Zinc-plated Horizontal foot mounting Pneumatic pushrod actuator Material: zinc-plated finish FAQ What materials is this clamp suitable for? The Pneumatic Pushrod Clamp 662 is a general-purpose clamping device; suitability depends on fixture design rather than material type, and the clamp’s forces (1,500 N push, 2,960 N hold) suit many metal and polymer workpieces when correctly fixtured. Can the clamp be mounted vertically instead of horizontally? The product is specified with a horizontal foot for base mounting; vertical installation would require an adapted fixture or consultation to ensure secure support and correct pneumatic connection. How does the 12 mm piston affect operation? A 12 mm piston provides a compact stroke and reliable linear motion, giving precise actuation suitable for confined fixture spaces while maintaining consistent clamping pressure. Is the clamp suitable for automated production cells? Yes, the pneumatic actuation and repeatable forces make the device a practical choice for semi-automated and automated fixtures when integrated with appropriate pneumatic valves and control logic. What identification details are provided for spare parts and ordering? Use the SKU 662-3-Q12 and GTIN 8680731505931 when specifying the Kukamet Pneumatic Pushrod Clamp for ordering and spare-part queries. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
12mm Push Rod Clamp Horizontal Base 1,500N Thrust, Zinc-Plated Cast Body 0.63kg - Kukamet
Dependable holding force of 1,700 N combined with a compact 0.63 kg body ensures fast fixture changes and stable clamping in workshop environments; the galvanised cast construction increases corrosion resistance and service life. Order the push-rod clamp 535 directly via Metav Werkzeuge or ask our consultants if needed. Push-rod clamp 535 – Horizontal-foot clamp with 1,500 N pressing force (Kukamet) Push-rod clamp 535 is a compact mechanical clamp for horizontal mounting, designed for repetitive fixture and workholding operations in workshops and light industry. Horizontal-foot mounting for stable installation Galvanised cast body for corrosion resistance Maximum pressing force 1,500 N Compact weight 0.63 kg for easy handling Consistent clamping performance for repeatable workflows The clamp delivers a maximum pressing force of 1,500 N and a holding force of 1,700 N, providing a clear performance margin for many assembly and machining tasks. These figures translate into reliable part retention during short-cycle operations and manual machining, reducing rework and misalignment. The mechanism converts operator action into a reproducible axial push, which is preferable where consistent clamping pressure is required. Such predictable behaviour supports planning of cycle times and tool paths in production processes. Durable construction that keeps the workshop running Built with a galvanised exterior and a cast body, the device resists routine wear and corrosive workshop atmospheres better than uncoated components. Galvanising protects exposed surfaces from oxidisation, while the cast main body provides the rigidity necessary to maintain alignment under load. Together these features help to extend mean time between replacements and limit unscheduled maintenance, supporting a steady production flow and lower lifetime operating costs. Fast mounting and compact handling for flexible setups The horizontal-foot design enables secure attachment to machine tables or fixture plates and supports a low-profile installation where space is restricted. The integrated pressure spindle (M8 x 50) allows fine adjustment of contact point and stroke, while the 12 mm piston diameter ensures an efficient transfer of force. At 0.63 kg, the unit is small enough to be repositioned quickly during fixture changes, which speeds set-up times and reduces downtime between jobs. Clear specifications to aid procurement and integration Technical clarity simplifies stocking and replacement planning: the clamp is supplied in a compact, ready-to-install format with standardised connection dimensions and a familiar mounting footprint. The combination of measured performance data—pressing force, holding force, piston diameter—and the robust build makes specification for jigs and fixtures straightforward. For purchasing and inventory control the product is listed under SKU 535-3-Q12-R with GTIN 8682843521236, facilitating traceability and reorder processes. For reliable workshop clamping choose the Kukamet push-rod clamp 535—contact Metav Werkzeuge for procurement advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 535-3-Q12-R GTIN: 8682843521236 SKU: 535-3-Q12-R EClass: 21041716 ETIM: EC011973 Facts Maximum pressing force: 1,500 N Holding force: 1,700 N Piston diameter: 12 mm Weight: 0.63 kg Special features Material: galvanised with cast body Mounting: horizontal foot Pressure spindle: M8 x 50 Category: Clamping FAQ What is the maximum pressing force of this clamp? The clamp provides a maximum pressing force of 1,500 N, enabling secure retention for many manual and light machining operations. Which mounting option does the clamp use? The unit is supplied with a horizontal foot for stable attachment to worktops and fixture plates. Is the clamp suitable for use in corrosive workshop atmospheres? With a galvanised cast body, the clamp offers improved resistance to oxidisation and general workshop humidity compared with uncoated components. What are the connection and adjustment specifications? Adjustment is via a M8 x 50 pressure spindle and the actuator uses a 12 mm piston diameter to deliver the specified force. How is the product identified for ordering and inventory? The product is listed under SKU 535-3-Q12-R and GTIN 8682843521236 for procurement and stock management. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
12mm Push Rod Clamp Horizontal Base 2,500N Thrust, Zinc Plated 2960N Hold Force - Kukamet
Take advantage of a compact, zinc‑plated clamp that combines robust holding power and space‑saving installation for reliable fixture work; its 2,500 N clamping capacity and horizontal mounting foot make it suitable for repetitive operations in jigs and fixtures. Order directly via Metav Werkzeuge or contact the consultants for tailored specification advice. 521 Push‑rod Clamp (Horizontal foot, 2.5 kN) – Kukamet The 521 is a compact push‑rod clamp designed for horizontal mounting in fixtures and assembly jigs, delivering consistent clamping up to 2,500 N with a corrosion‑resistant zinc finish. Quick‑action clamping mechanism Horizontal mounting foot for fixture use Zinc‑plated for corrosion resistance 12 mm piston diameter for compact force transfer Robust holding where space is tight The compact design of this push‑rod clamp supports reliable fixture layouts where flange or rail space is limited. The horizontal mounting foot allows the unit to be secured close to the workpiece, reducing leverage and improving stability during repetitive cycles. With a zinc‑plated finish, the unit withstands humid workshop conditions while remaining easy to integrate into existing tooling. The small footprint and light weight lend themselves to both fixed production jigs and portable assembly rigs, enabling precise positioning without bulky attachments. Consistent clamping force for repetitive tasks Engineered for predictable performance, the device delivers a maximum clamping force of 2,500 N and a maximum holding capacity of 2,960 N, giving a clear safety margin between applied and retained forces. The 12 mm piston transfers clamping energy efficiently, which shortens cycle times and reduces the need for readjustment. For process planners this means fewer stoppages for re‑clamping and a measurable improvement in throughput when the clamp is used in repetitive assembly or inspection stations. Durable materials and practical mounting options Constructed with a zinc‑plated body, the clamp resists corrosion without requiring specialised maintenance. The horizontal foot fixing simplifies alignment and allows the use of common fasteners for installation. The robust thread spindle specification (M8x50) provides secure attachment with standard hardware. These features together lower total lifecycle effort and support predictable service intervals in busy workshops and small production lines. Integration, safety and workshop benefits The clamp’s compact actuation and clearly defined force ratings make it suitable for automated or manual applications where controlled clamping is essential. Because the design separates actuation and holding capacities, planners can select appropriate safety margins for different fixture tasks. For buyers seeking straightforward installation and straightforward spare‑part management, the unit’s standardised dimensions and familiar fastening mean shorter downtimes and easier stock management for maintenance teams. For durable, space‑efficient clamping choose Kukamet’s 521 and contact Metav Werkzeuge for specification support and reliable supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 521-3-Q12 GTIN: 8680731502756 Brand: Kukamet Weight: 0.39 kg Material: zinc‑plated Facts Maximum clamping force: 2,500 N Maximum holding force: 2,960 N Piston diameter: 12 mm Thread spindle: M8x50 ECLASS: 21041716 ETIM: EC011973 Special features Horizontal foot mounting Compact push‑rod actuation Suitable for fixture and jig work SKU: 521-3-Q12 FAQ What is the maximum clamping force of this clamp? The Kukamet 521 push‑rod clamp provides a maximum clamping force of 2,500 N, with a maximum holding capacity of 2,960 N for secure retention in fixture applications. Which mounting orientation is recommended for installation? The unit is supplied with a horizontal mounting foot designed for installation on flat fixture surfaces; the horizontal foot ensures stable engagement and straightforward alignment in jigs. What is the piston diameter and why does it matter? The piston has a 12 mm diameter, which concentrates force transfer in a small form factor and supports compact fixture designs while maintaining effective clamping power. Is the clamp protected against corrosion in workshop environments? Yes, the body is zinc‑plated, offering basic corrosion resistance suitable for standard workshop and assembly conditions without specialised coatings. Can this clamp be used in automated assembly lines? The clamp’s predictable force characteristics and compact actuation make it suitable for integration into automated or semi‑automated assembly stations where fixed clamping cycles are required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
12mm Push Rod Clamp Horizontal Foot 2.5kN Thrust, Zinc Plated Cast Body 0.635kg - Kukamet
Take advantage of the combination of robust holding power, simple mounting and corrosion-resistant construction for reliable clamping in serial production. Order the Kukamet push-rod clamp directly via Metav Werkzeuge or consult our specialists for application advice. Push-rod clamp 531 — Kukamet horizontal-base clamp with 3.7 kN holding force The Push-rod clamp 531 is a horizontal-base push rod clamp designed for secure workholding in workshop and light industrial applications Horizontal base for stable mounting Holding force up to 3,700 N Zinc-plated cast body for long life Pressure spindle M8×50 for adjustable contact Consistent clamping for repeatable production A clamp that delivers measurable results reduces scrap and downtime. With a maximum holding force of 3,700 N and a maximum pressing force of 2,500 N, this device secures components reliably during machining, assembly or testing. The adjustable pressure spindle M8×50 permits fine contact pressure setting, making repeatable setups faster to achieve. Translating specification into benefit: fewer re-clamps and more consistent tolerances across batches. Built to withstand workshop environments Robust construction matters where tools are used daily. The unit features a zinc-plated cast body that combines structural rigidity with corrosion resistance, extending service life even in humid or oily surroundings. At approximately 0.635 kg, the clamp offers a favourable weight-to-stability ratio, simplifying handling during fixture changes while maintaining a solid feel when engaged. The material choice minimises maintenance and supports long-term reliability. Faster set-up and safe operation on the shop floor Fast, repeatable clamping reduces cycle time. The horizontal base allows secure bolting to fixtures or workbenches for immediate use, while the compact actuation mechanism and piston diameter 12 mm ensure a direct transfer of force with limited deflection. The mechanical principle is straightforward, enabling quick operator familiarisation and a lower risk of incorrect use compared with more complex systems. The compact design keeps the clamped area clear and accessible for machining operations. Versatile use across fixtures and applications This clamp is suited to general workshop fixturing, assembly stations and jigs where dependable lateral clamping is required. Its form factor and mounting style make it compatible with existing clamping arrays or bespoke fixtures. Where several identical clamps are required for series production, consistent performance supports process stability and predictable throughput. For procurement channels seeking an assured blend of functionality and stock availability, the supply via Metav Werkzeuge offers the additional reassurance of a European quality filter. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet push-rod clamp 531 into existing fixtures and to request technical compatibility information from Emmerich’s quality specialists Technical Data SKU: 531-3-Q12 GTIN: 8680731502800 Weight: 0.635 kg Material: zinc-plated with cast body Facts Maximum pressing force: 2,500 N Maximum holding force: 3,700 N Piston/rod diameter: 12 mm Pressure spindle: M8×50 Special features Horizontal base mounting Category: clamp / spanner Compact design for fixture integration Suitable for workshop and light industrial use FAQ What is the maximum holding force of this clamp? The Kukamet push-rod clamp 531 provides a maximum holding force of 3,700 N for secure workpiece retention. How is the clamp mounted to a fixture? Mounting is performed via the horizontal base; the design is intended for bolting to jigs, fixtures or workbench plates for stable installation. Is the finish resistant to workshop corrosion? Yes, the zinc-plated cast body offers corrosion resistance suitable for typical workshop environments. What adjustments are available for contact pressure? Contact pressure is adjusted using the M8×50 pressure spindle, allowing fine setting of pressing force for different workpieces. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Toggle Clamp Vertical Base Zinc Plated With Hook, 1500N Thrust/1800N Hold - Kukamet
Take advantage of the combination of robust holding performance, corrosion-resistant zinc-plated construction and easy adjustability for reliable, repeatable clamping in production and workshop fixtures; order directly via Metav Werkzeuge or consult our technical team for application support. Kukamet 412 Latch Clamp — Vertical-foot, zinc-plated with hook engagement, 1.8 kN holding force Kukamet 412 is a compact latch clamp designed for secure fastening in fixtures and jigs, combining a vertical-foot mounting with a hooked engagement for rapid, repeatable closures. Vertical-foot mounting for stable installation Zinc-plated finish for basic corrosion protection 1,800 N holding force for secure locking 50 mm adjustable threaded spindle Proven performance for secure fixtures The latch unit delivers measurable reliability: a 1,500 N clamping force paired with a 1,800 N holding force provides a clear safety margin for repeatable closures in production environments. The 50 mm threaded spindle allows straightforward fine adjustment of the clamping gap, enabling consistent contact pressure across workpieces. Such quantifiable performance reduces rework and supports a predictable setup time on assembly stations. Simple installation and fast, repeatable operation Engineered for efficient mounting, the vertical-foot configuration provides a compact footprint and stable attachment to fixture plates. The clamp is supplied with hook, ensuring positive engagement and preventing unintended release under vibration. At 0.21 kg, the unit is lightweight yet robust, simplifying handling during installation and facilitating modular fixture designs where rapid reconfiguration is required. Durable, low-maintenance design for daily workshop use A zinc-plated finish gives the clamp basic resistance to surface corrosion, extending service life in standard workshop conditions while keeping maintenance demands low. The straightforward mechanical design supports longevity and uncomplicated repair when required, making this latch an effective choice for production lines and small-batch manufacturing where reliability and rapid repeatability matter. Metav Werkzeuge’s supply from Emmerich ensures consistent product quality and dependable stock availability. Contact Metav Werkzeuge for tailored technical advice and dependable supply of the Kukamet 412 latch clamp — email info@metav-werkzeuge.com or call +49 2822 7131930 for specification support and fast delivery from Emmerich Technical data Article number: 412-2 GTIN: 8680731502558 Designation: Latch clamp 412 by Kukamet Mounting: vertical foot Facts Weight: 0.21 kg Max clamping force: 1,500 N Max holding force: 1,800 N Thread length: 50 mm Special features Material: zinc-plated steel With hook eClass: 21041718 ETIM: EC011973 Category: Clamping tools FAQ What clamping and holding forces are specified for this clamp? The Kukamet 412 latch clamp (SKU 412-2) specifies a clamping force of up to 1,500 N and a holding force of up to 1,800 N. How is the clamp mounted and adjusted? Mounting is via a vertical foot; adjustment is made using the 50 mm threaded spindle supplied for fine tuning of the clamping position. Is the clamp suitable for use in humid workshop conditions? The clamp is zinc-plated, which provides basic corrosion protection for typical workshop environments; for aggressive or outdoor exposures additional protection is recommended. Does the clamp include a hook for positive engagement? Yes, the unit is supplied with a hook engagement to ensure secure latching and resistance to unintentional release. How heavy is the clamp and what does that mean for fixture design? At 0.21 kg the clamp is lightweight, which supports modular fixture layouts and simplifies handling during installation or reconfiguration. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500 N Druckkraft, 12 mm Kolbendurchmesser, waagerechter Fuß, verzinkt mit Gusskörper, Haltekraft 3700 N - Kukamet
Der Pneumatische Schubstangenspanner kombiniert verzinkten Gusskörper, kompakte Bauform und 1500 N Schubkraft für zuverlässige Spannlösungen in der Werkstatt; die hohe Haltekraft von 3700 N sorgt für sichere Fixierung, der waagerechte Fuß erleichtert den Einbau. Bestellen Sie das Gerät direkt über Metav oder kontaktieren Sie unsere Beratung bei technischen Fragen. Pneumatischer Schubstangenspanner von Kukamet Der Pneumatische Schubstangenspanner ist ein pneumatisch betätigter Spannkörper für wiederholte Spannvorgänge in Fertigung und Montage und eignet sich insbesondere für robuste Werkstattanwendungen. Verzinkter Gusskörper für lange Lebensdauer Waagerechter Fuß für einfache Montage Druckkraft 1500 N für schnellen Vorschub Haltekraft 3700 N für sichere Fixierung Kompaktes Gewicht 1,37 kg für flexible Einbaustandorte Robuste Bauweise reduziert Wartungsaufwand und Ausfallzeiten Der verzinkte Gusskörper bietet effektiven Korrosionsschutz und mechanische Stabilität bei häufiger Beanspruchung. Durch die Oberflächenveredelung wird die Lebensdauer erhöht, somit sinken Wartungsaufwand und Stillstandszeiten. Anwender profitieren von geringeren Instandsetzungskosten und verlässlicher Wiederholgenauigkeit bei Serienprozessen. Präzise Kraftverteilung für sichere Spannvorgänge Mit einer Druckkraft von 1500 N und einer Haltekraft von 3700 N gewährleistet das Gerät kraftvolle Bewegung und zuverlässige Verriegelung der Spannposition. Der Kolbendurchmesser von 12 mm sorgt für direkte Kraftübertragung, wodurch wiederholte Spannzyklen kontrolliert und reproduzierbar ablaufen. Pneumatische Betätigung bedeutet zudem schnelle Reaktionszeiten und einfache Anbindung an vorhandene Druckluftinstallationen. Einbaufreundliche Konstruktion und vielseitige Einsetzbarkeit Die Befestigungsart mit waagerechtem Fuß vereinfacht die Montage auf Vorrichtungen und Spannvorrichtungen; das geringe Gewicht von 1,37 kg ermöglicht den Einsatz auch in beengten Einbausituationen. Das Gerät ist als Hebelspanner konzipiert und eignet sich für Werkstattautomation, Prüffelder und Fertigungsstraßen, wo kompakte, zuverlässige Spanntechnik gefragt ist. Bestellen Sie den Kukamet Pneumatischen Schubstangenspanner über Metav und sichern Sie sich robuste Spannkraft, schnelle Verfügbarkeit sowie kompetente Beratung per eMail (info@metav-werkzeuge.com) oder Telefon (+49 2822 7131930) Produktmerkmale Artikelnummer: 641-3-Q12 Marke: Kukamet Bezeichnung: Pneumatischer Schubstangenspanner, 641 Fakten Druckkraft (max): 1500 N Haltekraft (max): 3700 N Durchmesser Kolben: 12 mm Gewicht: 1,37 kg Besonderheiten Material: Verzinkt mit Gusskörper Befestigungsart: waagerechter Fuß Hebelspanner FAQ Für welche Anwendungen eignet sich der Spannkörper am besten? Der Pneumatische Schubstangenspanner von Kukamet eignet sich für wiederholte Spannvorgänge in Montage, Prüftechnik und Fertigung, SKU 641-3-Q12, und bietet durch seine robusten Eigenschaften hohe Prozesssicherheit. Welche Unterschiede bestehen zwischen Druckkraft und Haltekraft? Die Druckkraft beschreibt die Schubbewegung des Kolbens (bei diesem Modell 1500 N), die Haltekraft (3700 N) gibt an, wie stark die Fixierung im verriegelten Zustand wirkt; diese Werte gewährleisten beim Kukamet Pneumatischen Schubstangenspanner sichere Spannvorgänge. Wie wird der Spanner montiert und ausgerichtet? Die Montage erfolgt über den waagerechten Fuß; beim Kukamet Schubstangenspanner 641 empfiehlt sich eine feste Befestigung auf der Vorrichtung, um präzise Wiederholpositionen zu gewährleisten. Ist das Gerät für den Einsatz in feuchten Umgebungen geeignet? Der verzinkte Gusskörper bietet einen grundsätzlichen Korrosionsschutz, wodurch der Pneumatische Schubstangenspanner von Kukamet für normale Werkstattbedingungen gut geeignet ist; bei aggressiven Medien sind zusätzliche Schutzmaßnahmen zu prüfen.
1500 N Toggle Clamp Horizontal Base, 50 mm Thread Length, Zinc Plated, With Hook - Kukamet
Robust galvanised construction combined with a compact 0.21 kg body provides dependable clamping and holding performance — 1,500 N clamping force and 1,800 N holding force ensure secure fixtures on production lines and jigs. Order the Kukamet 411 latch clamp directly via Metav Werkzeuge or ask our consultants for technical clarification. Kukamet 411 horizontal toggle latch clamp — galvanised, with hook Kukamet 411 is a horizontal-base toggle latch clamp designed for secure, repeatable fastening in industrial and workshop fixtures Galvanised steel for corrosion resistance Stable horizontal base for easy mounting Clamping force up to 1,500 N Holding force up to 1,800 N Consistent, measurable performance that keeps production moving Engineered for reliable engagement, this horizontal toggle clamp delivers a defined clamping force of 1,500 N and a holding force of 1,800 N, values that translate into repeatable fixture pressure and reduced rework. The difference between clamping and holding forces is important: clamping force denotes the active closing pressure applied during locking, while holding force indicates the continued resistance against vibration and external loads. For assembly and welding jigs where repeatability and predictable load capacity matter, the clamp’s rated forces provide a clear basis for fixture design and risk assessment. The galvanised finish supports long-term dimension stability in common shop environments. Space-saving installation and adjustable reach for versatile fixtures The compact construction at 0.21 kg and the horizontal base make this latch clamp suitable where space is limited or multiple clamps are clustered. The thread length 50 mm allows for adjustable latch engagement so the closure can be fine-tuned for different panel thicknesses or mating plates. A small mass reduces dynamic loads on moving assemblies and simplifies handling during fixture setup. The integrated hook secures the mating part with minimal play, making the device appropriate for repetitive indexing operations and small-batch production where quick manual actuation is required. Galvanised surface and straightforward materials choice for durability A galvanised finish provides corrosion resistance in typical workshop atmospheres and helps maintain surface appearance and function without specialised coatings. Constructed for simple robustness rather than complex maintenance, the clamp is suitable for use on steel, aluminium and similar substrates when combined with appropriate fasteners. The horizontal-foot mounting enables direct attachment to flat plates or rails, reducing the need for additional brackets. Supplied through Metav Werkzeuge’s distribution in Emmerich, the component benefits from a reliable European supply chain and clear logistical traceability. Request a technical quote or delivery schedule from Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice on the Kukamet 411 latch clamp and assured European stock supply. Technical data Article number: 411-2 GTIN: 8680731502527 ECLASS: 21041718 ETIM: EC011973 Facts Weight: 0.21 kg Clamping force: 1,500 N Holding force: 1,800 N Thread length: 50 mm Special features Material: galvanised steel Fastening type: horizontal base With hook Category: spanner / clamp Brand: Kukamet FAQ What maximum forces can the clamp handle? The Kukamet 411 latch clamp is rated for a clamping force of 1,500 N and a holding force of 1,800 N, suitable for many light- to medium-duty fixture tasks. How is the clamp mounted? Mounting is via the horizontal base; the design allows direct attachment to flat plates or rails and was created to simplify positioning in jigs and fixtures. Is the finish suitable for mildly corrosive environments? Yes, the galvanised surface provides basic corrosion resistance appropriate for standard workshop conditions and indoor production areas. Can the hook be adjusted for different panel thicknesses? The device includes a 50 mm thread length for adjustment, enabling fine-tuning of engagement to match panel or plate variations. Which materials pair well with this toggle clamp? The clamp’s construction and fastening options make it compatible with steel and aluminium assemblies when used with appropriate fasteners; selection depends on the specific fixture design and load assumptions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500 N Pneumatic Pushrod Clamp Horizontal Base, Zinc-Plated Cast Body, 12 mm Piston - Kukamet
Take advantage of the robust galvanised cast body combined with 3,700 N holding force and a compact 1.09 kg mass for dependable clamping in repetitive production tasks. Order the Pneumatic push‑rod clamp directly via Metav Werkzeuge or consult the Metav team for application advice. Pneumatic Push‑rod Clamp 671 by Kukamet — 1,500 N thrust, 3,700 N holding force A versatile pneumatic push‑rod clamp, 671, designed for secure workholding in assembly lines, fixtures and automated jigs. Galvanised cast body Max holding force 3,700 N Piston diameter 12 mm Thrust force up to 1,500 N Compact design, weight 1.09 kg Consistent clamping that keeps production moving The Pneumatic push‑rod clamp 671 delivers reproducible clamping with a holding force of 3,700 N and a thrust force of 1,500 N, making it suitable for short-cycle production and fixture applications where repeatability matters. The piston diameter 12 mm balances force and stroke control, enabling precise engagement without excessive air consumption. For production planners, this combination translates into fewer rejects and steadier throughput, as the pneumatic actuation provides fast, reliable motion that integrates into pick-and-place sequences or repeated part positioning. Built to endure daily use with low maintenance Constructed with a galvanised cast body, the unit resists corrosion and mechanical wear in workshop and industrial environments, reducing maintenance intervals. The compact weight of 1.09 kg supports lightweight fixture designs while contributing to durable performance under continuous cycling. The horizontal foot mounting ensures a secure mechanical connection to frames and plates, and the robust housing protects internal components from impact and contamination, thereby extending service life and lowering running costs over multiple production campaigns. Simple integration for automated systems and fixtures Engineered for pneumatic installations, this clamp features a standard actuation style and mounting that eases mechanical and pneumatic integration into conveyors, jigs or assembly fixtures. The straightforward mechanical interface and stable clamping behaviour help to shorten setup time for tooling changes and accelerate commissioning in automated lines. The reliable actuation characteristics minimise process variability, supporting consistent part quality and a measurable improvement in operational efficiency for engineering and production teams. For specification advice and assured delivery, rely on Kukamet quality through Metav Werkzeuge — contact Metav Werkzeuge for detailed compatibility checks and supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 671-3-Q12 GTIN: 8680731503166 Manufacturer: Kukamet Facts Weight: 1.09 kg Thrust force (max): 1,500 N Holding force (max): 3,700 N Piston diameter: 12 mm Special features Galvanised with cast body Horizontal foot mounting Category: Spanner eClass: 21041716 ETIM: EC011973 FAQ What clamping forces does the clamp provide? The Pneumatic push‑rod clamp 671 from Kukamet provides a holding force of 3,700 N and a thrust force up to 1,500 N (SKU 671-3-Q12). How is the clamp mounted to fixtures? The unit is supplied for horizontal foot mounting, allowing secure fixation to plates or jig frames for stable workholding. What is the unit weight and how does that affect fixture design? The clamp weighs 1.09 kg, which supports compact fixture design while maintaining mechanical stability during repeated cycles. Can this clamp be used in automated pneumatic systems? Yes, the pneumatic actuation with a 12 mm piston diameter is suitable for automated sequences and can be integrated into assembly lines and jigs where rapid, repeatable movement is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500 N Pneumatic Push‑Rod Clamp Horizontal Base, Zinc Plated, 12 mm Piston - Kukamet
Take advantage of a compact, zinc‑plated clamp that delivers reliable, repeatable clamping: 2,960 N holding force and 1,500 N push force ensure secure fixation in automated fixtures. Order the pneumatic push‑rod clamp directly via Metav Werkzeuge or consult its specialists for integration advice. Pneumatic Push‑Rod Clamp 621 — Kukamet clamp with 1,500 N push force and Ø12 mm piston A Pneumatic Push‑Rod Clamp 621 engineered for secure, repeatable clamping in industrial jigs, assembly stations and automated fixtures Zinc-plated corrosion protection Max holding force 2,960 N Push force 1,500 N piston Ø12 mm Horizontal foot for secure mounting Consistent, measurable clamping performance for production lines The pneumatic push‑rod clamp provides a clearly defined mechanical output that supports process stability: max push force 1,500 N (pushing) and holding force 2,960 N (retention). The difference between push and holding forces is explained by the clamp’s mechanical advantage and internal geometry; the actuator produces the specified push force while the clamping geometry and contact area determine the holding capability. Delivered with a 12 mm piston diameter, the actuator is suited to medium‑force fixture tasks where repeatability and cycle speed matter. Specified values allow straightforward calculation of fixture loads and cycle requirements for machine designers and fixture engineers. Robust construction and straightforward mounting for long service life Built from zinc‑plated components, the clamp resists surface corrosion in typical workshop and production environments, reducing the need for frequent replacement. The horizontal foot mounting ensures stable attachment to subplates and tooling plates, simplifying alignment in modular fixture systems. At 1.14 kg the unit is compact enough for dense fixture layouts while remaining substantial enough for rugged use. Corrosion protection and solid mounting reduce downtime and maintenance effort, supporting continuous operation in series production or demanding jobbing environments. Integration, procurement and traceable specifications for engineering teams Technical classification and identifiers are provided for procurement and system integration: eClass 21041716, ETIM EC011973 and GTIN 8682843521601 allow clear matching in BOMs and ERP systems. The clamp is supplied under SKU 621-3-Q12, facilitating ordering and inventory management. Where control or sequencing is required, the actuator can be incorporated into pneumatic valve circuits; piston dimension and force data support valve sizing and cycle timing calculations. The product’s compact profile and measurable output make it suitable for retrofitting existing fixtures as well as new automation designs. Contact Metav Werkzeuge to discuss integrating the Kukamet pneumatic push‑rod clamp 621 into production equipment and to arrange fast delivery and technical documentation from Emmerich Technical data SKU: 621-3-Q12 GTIN: 8682843521601 Manufacturer: Kukamet Facts Max holding force: 2,960 N Max push force: 1,500 N Piston diameter: 12 mm Weight: 1.14 kg eClass: 21041716 ETIM: EC011973 Special features Material: zinc‑plated Mounting: horizontal foot Category: clamp Rapid dispatch noted in product listing FAQ What clamping forces are specified for this clamp? The Kukamet pneumatic push‑rod clamp 621 specifies a push force of 1,500 N and a holding force of 2,960 N, values suitable for medium‑force fixture applications. Is the clamp suitable for integration into automated jigs? Yes, the clamp’s compact build, 12 mm piston, and horizontal foot mounting make it suitable for automated jigs and modular fixture systems. Which identifiers help with procurement and parts management? Use SKU 621-3-Q12, GTIN 8682843521601, eClass 21041716 and ETIM EC011973 for BOM and ERP matching. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Horizontalspanner 112 mit senkrechtem Fuß
Technical Overview:Manufacturer: KukametModel: Horizontal toggle clampOrder now Horizontal toggle clamp Online.
15° 842 Horizontal Foot Quick-Acting Clamp Screw-Type, Zinc-Plated, 3.5 kN Thrust / 4 kN Hold - Kukamet
Product data contains contradictory information: the item is described as both a screw-clamp type and a lever clamp. This inconsistency makes it difficult to determine the correct clamp type and provide a clear, comprehensive product description. Accurate product details are essential to ensure customers understand the item's functionality and suitability for their needs. Please clarify whether the clamp type is screw-clamp, lever clamp, or another variation. Resolving this ambiguity will allow for the creation of a complete and accurate product description that aligns with the item's actual specifications and intended use.
3700N Holding Force 2500N Thrust Rod Clamp Horizontal Base Zinc Plated Cast Body - Kukamet
Take advantage of the combination of compact design, 2,500 N pressing force and a zinc-plated cast body for reliable fixture performance; order the clamp directly via Metav Werkzeuge or contact our consultants for specification advice. Push‑rod clamp 532 — horizontal foot, 2.5 kN pressing force (Kukamet) The Push‑rod clamp 532 is a compact push‑rod clamping element for fixture and workholding applications, engineered for horizontal‑foot mounting and reliable repetitive operation. Kukamet push‑rod clamp 532 Horizontal‑foot mounting for stable fixing 2,500 N pressing force for secure clamping Zinc‑plated cast body for corrosion resistance Secure hold for production and jigging The clamp delivers a pressing force of 2,500 N and a holding force of 3,700 N, values that are decisive for dependable positioning and stability during machining or assembly cycles. The 12 mm piston diameter concentrates force with a compact footprint, making the unit suitable where space is limited but consistent clamping is required. Built to provide reproducible contact pressure, the device reduces cycle variability and supports efficient downstream processing through stable workpiece retention. Fast integration and reduced setup time Fitted with a horizontal foot and a pressure spindle sized M8x50, the component is designed for straightforward attachment to standard fixture plates and compatible bases. The clamp’s low mass (0.59 kg) simplifies handling during jig assembly and limits additional load on moving fixtures. As a result, set‑up time is shortened and fixtures can be modified or reconfigured with minimal effort, improving machine availability and contributing to leaner production flows. Durable construction for long service life A zinc‑plated cast body combines mechanical strength with corrosion protection, ensuring the clamping element withstands workshop conditions and routine handling. Surfaces are treated to resist wear and environmental influence, so maintenance intervals are extended and replacement cycles are reduced. The straightforward mechanical design supports uncomplicated inspection and servicing; common adjustments can be made without specialist tools, supporting a dependable, low‑effort maintenance routine. Contact Metav Werkzeuge today for detailed technical guidance, compatibility checks or a tailored quotation for the Kukamet push‑rod clamp 532 — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 532-3-Q12 GTIN: 8680731504446 Manufacturer: Kukamet Facts Pressing force max: 2,500 N Holding force max: 3,700 N Piston diameter: 12 mm Weight: 0.59 kg Pressure spindle: M8x50 eClass: 21041716 ETIM: EC011973 Materials and features Material: zinc‑plated with cast body Mounting: horizontal foot Category: Spanner Story trigger: lever clamp FAQ What maximum clamping and holding forces does the clamp provide? The clamp provides a maximum pressing force of 2,500 N and a holding force of 3,700 N, as specified for the Kukamet push‑rod clamp 532 (SKU 532-3-Q12). How is the clamp mounted in a fixture? Mounting is via a horizontal foot; the unit is delivered for horizontal‑foot installation and is compatible with standard fixture plates using the M8x50 pressure spindle. What is the weight and how does it affect fixture design? The unit weighs 0.59 kg, which minimises added mass to moving assemblies and simplifies manual handling during fixture assembly. Is the clamp suitable for harsh workshop conditions? The clamp’s zinc‑plated cast body provides corrosion resistance and mechanical robustness, supporting reliable operation in typical workshop environments. How large is the piston and why does this matter? The piston diameter is 12 mm, which concentrates clamping force in a compact form and contributes to consistent contact pressure across repeated cycles. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500 N Push Rod Clamp 12 mm Piston Diameter Horizontal Foot Zinc-Plated Cast Body, 3700 N Hold Force - Kukamet
Taking advantage of 2,500 N clamping force and a zinc‑plated cast body, the unit offers dependable fixture performance and long service life; secure the Pushrod clamp directly via Metav Werkzeuge or contact their consultants for tailored advice. Pushrod clamp 536 by Kukamet — 2,500 N clamping force, zinc‑plated cast body The Pushrod clamp 536 is a compact rod clamping unit designed for horizontal mounting in workshop fixtures and jigs, combining compact mass with robust holding characteristics for repetitive production use. 2,500 N maximum clamping force 3,700 N holding capacity Zinc‑plated cast body for durability Horizontal foot for secure mounting Robust clamping for consistent production results The clamping unit delivers a clear technical advantage through its 2,500 N maximum clamping force paired with a 3,700 N holding capacity, ensuring stable fixation during machining and assembly operations. These values describe the active push force and the passive retention the device can provide; the higher holding capacity reduces the risk of workpiece shift under shock loads. The combination of force ratings supports short cycle times and predictable fixture behaviour, which can translate into fewer rejects and more consistent downstream processing. Compact construction that simplifies integration Engineered for easy installation, the clamp features a horizontal foot mounting style and a lightweight construction of 0.59 kg, helping to keep fixture mass low and maintain machine dynamics. The zinc‑plated cast body offers corrosion resistance and mechanical stiffness, reducing deformation under load and extending service intervals. A 12 mm piston diameter and an M8x50 pressure spindle enable fine adjustment of clamp travel and contact pressure, making the component suitable for precise positioning tasks without bulky ancillary parts. Designed for workshop and fixture applications As a dedicated clamping element for jigs and assembly fixtures, the rod clamp provides reliable repeatability and straightforward mechanical operation. The compact profile facilitates use in stacked or multi-point clamping arrangements where space is limited; only minimal additional hardware is required for secure attachment. The robust finish and cast construction support longevity in production environments, while the clear technical specs allow planning for lifecycle and maintenance routines based on measurable performance criteria. Contact Metav Werkzeuge today for expert guidance and to reserve the Pushrod clamp 536 (SKU 536-3-Q12) from stock in Emmerich for immediate fixture upgrades Technical data SKU: 536-3-Q12 GTIN: 8682843521250 eClass: 21041716 ETIM: EC011973 Measured values Maximum clamping force: 2,500 N Holding capacity: 3,700 N Piston diameter: 12 mm Weight: 0.59 kg Materials & features Zinc‑plated with cast body Horizontal foot mounting Pressure spindle: M8x50 Category: Clamps / Spanner FAQ What clamping and holding forces does the unit provide? The Pushrod clamp 536 offers a maximum clamping force of 2,500 N and a holding capacity of 3,700 N, values that support secure fixation in jigs and fixtures. How is the clamp mounted in a fixture? Mounting is via a horizontal foot, allowing the rod clamp to be fastened to plate or fixture bases for stable lateral fixation. What material and finish does the product have? The unit features a zinc‑plated, cast body, giving corrosion resistance and structural rigidity suitable for workshop environments. Which adjustment elements are supplied? The clamp is equipped with a M8x50 pressure spindle and a 12 mm piston diameter, enabling controlled contact pressure and precise clamping travel. What is the item weight and how does that affect fixture design? The clamp weighs 0.59 kg, supporting low overall fixture mass and easier handling during assembly planning. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
17-42mm Closure Clamp Horizontal Foot With Spring, 220N Thrust, Stainless Steel - Kukamet
Combining stainless steel construction with a spring-loaded mechanism and a secure holding force, this clamp ensures reliable, low-maintenance fastening for industrial fixtures. Its adjustable arm and horizontal-foot mounting give versatile fit and simple integration. Order the 311 latch clamp directly via Metav Werkzeuge or ask our consultants if needed. 311 Latch Clamp — Stainless steel, spring-loaded horizontal-foot latch by Kukamet The 311 latch clamp is a spring-loaded stainless steel closure clamp with a horizontal foot, designed for secure fastening of panels, covers and fixtures in industrial and workshop applications. Spring-loaded over-centre action Stainless steel construction Adjustable arm 17–42 mm Holding force up to 325 N Secure, consistent fastening for repeatable processes The spring-loaded over-centre design provides consistent clamping and minimise the risk of loosening under vibration. With a rated holding force of up to 325 N and a maximum clamping force of 220 N, the closure offers dependable retention in repetitive assembly or transport situations. The mechanical action guarantees repeatable results without manual re-tensioning, supporting higher process reliability and reduced downtime. Flexible mounting and quick adjustment for different assemblies An adjustable arm that covers 17–42 mm enables rapid adaptation to varying panel thicknesses or flange gaps, reducing the need for multiple part variants. The horizontal foot mounting allows a compact installation profile where space is limited, while the integrated hook provides a secure engagement point. The specified thread length of 75 mm supports conventional fastenings and fine adjustment during setup, making the clamp suitable for jigs, enclosures and access doors. Corrosion resistance and minimal upkeep in demanding environments Constructed from stainless steel, the latch is suited to environments where corrosion resistance is required, resulting in low maintenance and prolonged service life. The spring element ensures constant preload while absorbing minor misalignments, and the robust hook design withstands repeated cycles. Together, these attributes reduce replacement frequency and support a stable long-term fixture solution. Contact Metav Werkzeuge for expert advice on the Kukamet 311 latch clamp and to request detailed technical information or configuration support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: S311-3-Y GTIN: 8680731505702 Manufacturer: Kukamet Weight: 0.341 kg Core technical data Maximum clamping force: 220 N Maximum holding force: 325 N Arm range: 17–42 mm Thread length: 75 mm Weight: 0.341 kg Materials & features Material: stainless steel Attachment: horizontal foot With hook With spring Category: clamps FAQ What is the primary function of this latch clamp? The Kukamet 311 latch clamp is designed to provide secure, repeatable closure for panels and fixtures, offering a spring-loaded over-centre action and a reliable holding force for industrial applications. Can the clamp accommodate different panel thicknesses? Yes. The adjustable arm range of 17–42 mm allows the 311 latch clamp to be adapted to various gaps and panel thicknesses during installation. Is this clamp suitable for corrosive environments? The 311 latch clamp is made from stainless steel, which offers enhanced corrosion resistance and reduced maintenance in humid or corrosive settings. How is the clamp mounted? The unit is designed for horizontal-foot mounting and includes a hook engagement; a thread length of 75 mm permits standard fastening and fine positional adjustment. What load values should be considered for safety? Reference the maximum clamping force of 220 N and the holding force of 325 N when designing fixtures; these values indicate the clamp’s reliable retention and clamping capability. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
800 N Pushrod Clamp, Zinc Plated, M5x35 Actuating Spindle, 970 N Holding Force, Without Base - Kukamet
Combine compact design, reliable corrosion protection and assured clamping performance — with a maximum holding force of 970 N and a pressing force of 800 N for secure fixturing. Order the push‑rod clamp directly via Metav Werkzeuge or consult our specialists for application guidance. Push‑rod clamp 513 — compact zinc‑plated clamp with M5×35 spindle (Kukamet) The Push‑rod clamp 513 is a compact, zinc‑plated clamping element designed for fixture assembly and light to medium‑duty workholding in workshops and production environments Compact push‑rod clamp 513 by Kukamet Zinc‑plated steel for corrosion resistance Max holding force 970 N M5×35 screw spindle, no base required Secure holding with defined forces for reliable fixtures The push‑rod design delivers a clearly defined holding force and pressing force, ensuring components remain stable during assembly and light machining. The difference between the two values is functional: the pressing force of 800 N describes the maximum actuation load applied by the spindle, while the 970 N holding force indicates the clamp’s resistance against displacement once engaged. This separation of values helps planners specify the clamp within fixture load budgets and select suitable drive or actuation components. The compact actuation mechanism allows precise clamping without large levers or housings, supporting repeatable positioning in serial production. Durable finish and compact footprint for long service life A zinc‑plated surface finish provides corrosion resistance and a consistent appearance across multiple units, which is beneficial where parts are exposed to workshop humidity or coolant mist. The lightweight construction (approx. 0.095 kg) and compact geometry reduce added mass in jigs and do not impose excessive load on movable tooling. The combination of a corrosion‑resistant coating and a straightforward mechanical design results in a maintenance‑friendly clamp that minimises downtime and supports long‑term fixture reliability. Easy integration and adjustment in assembly setups Integration is simplified by the M5×35 spindle, which offers fine mechanical adjustment and compatibility with common fastening hardware. The clamp is supplied without a base, permitting direct mounting to fixtures, plates or custom adaptors and allowing flexible orientation in a clamping station. Its compact form factor makes it suitable for confined spaces where larger clamping elements would interfere with part access. For modular jigs and bespoke assembly equipment, this clamp provides defined bite and repeatability while occupying minimal space. Choose the Kukamet push‑rod clamp 513 for compact, corrosion‑resistant workholding and contact Metav Werkzeuge in Emmerich for specification advice and reliable supply. Technical data SKU: 513-1 GTIN: 8680731502701 Material: Zinc‑plated Weight: 0.095 kg Core specifications Max pressing force: 800 N Max holding force: 970 N Spindle: M5×35 eCl@ss: 21041716 ETIM: EC011973 Design & features Clamping type: push‑rod clamp Finish: zinc‑plated Installation: without base/foot Intended use: fixture assembly and workholding FAQ What is the difference between pressing force and holding force? Pressing force is the maximum actuation load (800 N) applied by the clamp’s spindle, while holding force (970 N) denotes the clamp’s resistance to displacement once engaged; both values are provided for the Push‑rod clamp 513 to aid correct fixture design. Can the clamp be mounted directly to a jig plate? Yes. The Push‑rod clamp 513 is supplied without a base, allowing direct mounting to plates or adaptors; the M5×35 spindle supports common fastening options for integration. What material and surface finish does the clamp feature? The clamp is made with a zinc‑plated finish for improved corrosion resistance and consistent service life in workshop environments. Is the spindle standardised and user‑replaceable? The unit uses an M5×35 spindle, a standard screw size that permits service and replacement with common fasteners as required. Which SKU should be referenced when ordering or specifying? Reference SKU 513-1 (Push‑rod clamp 513 by Kukamet) for ordering and documentation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com