Milling & Turning

Turning Holder (Klemmhalter) SVJCR 1616 by Teknik Makina The Turning Holder (Klemmhalter) is a precision Toolholder for Right‑Hand Turning, designed to accept VCMT 1103 Indexable Inserts for reliable metalcutting in workshop and production environments. Compatible with VCMT 1103 Indexable Inserts ISO Designation SVJCR 1616 for standard interfaces Overall Length 100 mm for stable overhang 93° Cutting Angle for accurate Right‑Hand turning Precision Clamping for Consistent Turning Results The Turning Holder delivers Precision Clamping through its SVJCR 1616 geometry, ensuring stable Insert retention and repeatable Cutting Performance. Users benefit from reduced Vibration and consistent Tool Life when machining facing and finishing operations. This stability translates into predictable surface quality and fewer interruptions for insert changes, which supports higher Productivity on both single parts and small batch runs. Designed for VCMT 1103 Inserts and Robust Operation Built specifically for VCMT 1103 Indexable Inserts, the holder’s seat and clamping concept make insert seating and replacement straightforward. The toolholder accommodates the insert geometry so that the effective Cutting Angle of 93° and Right‑Hand orientation generate reliable chip control and axial engagement. For customers unfamiliar with indexable tooling: an Indexable Insert is a replaceable cutting tip that provides cost‑efficient regrinding avoidance and fast changeover. Who benefits from this Toolholder Workshops, Job Shops, and Production Lines that require dependable turning solutions will find this holder suited to medium‑duty turning tasks. The combination of standardized ISO designation, compact Cross‑Section (16 mm × 16 mm), and a 20 mm Cutting Head Width makes the product particularly suitable for setups where tool rigidity and quick Insert swaps matter. Operators looking for predictable finishes and minimal setup time will appreciate the straightforward compatibility. Easy Integration, Clear Specifications, and Service Support Integration into existing turret systems is simplified by the standard SVJCR 1616 form factor and the 100 mm Overall Length that balances Reach and Rigidity. The compact dimensions enable close tool spacing while preserving stiffness. For technical questions or to confirm fitment, METAV Werkzeuge provides expert consultation and dimensional support to ensure correct selection and installation. Documentation and technical drawings are available on request to assist Machine Setup and Process Planning. Choose the Teknik Makina Turning Holder (Klemmhalter) for precise, repeatable turning — contact METAV Werkzeuge for personalised technical advice via info@metav-werkzeuge.com or +49 2822 7131930. Bezeichnung: Klemmhalter Brand: Teknik Makina SKU: D241TM Compatible Inserts: VCMT 1103 Overall Length: 100 mm Weight: 0.204 kg ISO Designation: SVJCR 1616 Secondary Designation: H11 Width: 16 mm Height: 16 mm Cutting Head Width: 20 mm Cutting Angle: 93° Cutting Direction: Right GTIN: 4061905153860 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina and which operations are suitable? The Teknik Makina Turning Holder (Klemmhalter) is compatible with VCMT 1103 Indexable Inserts and is ideal for facing, light roughing and finishing where a 93° Cutting Angle and Right‑Hand orientation are required. How is the insert secured in the SVJCR 1616 holder and can I reuse existing inserts? The SVJCR 1616 form relies on a precise seat and clamping mechanism; users can reuse standard VCMT 1103 Inserts as long as they match the required geometry and are not worn beyond recommended limits. I need help confirming fitment for my lathe — can METAV assist with technical details? Yes. METAV Werkzeuge offers competent advice for tooling selection and will provide dimensional support for the Teknik Makina Turning Holder; contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised assistance. 100mm SVJCR 1616 Turning Holder for VCMT 1103 Indexable Inserts, 93° Cut Angle, Right-Hand - Teknik Makina

Turning Holder (Klemmhalter) by Teknik Makina Turning Holder is a clamping tool for VCMT 1604 indexable inserts designed to deliver precise, stable right-hand turning performance in professional lathe applications. For VCMT 1604 indexable inserts 100 mm overall length 93° cutting angle for stable cuts Right-hand cutting direction ISO designation SVJCR 1616 compatible Precision Clamping for Consistent Turning Results The Turning Holder secures VCMT 1604 indexable inserts with a stable clamping interface that reduces vibration and improves Surface Finish. By combining a rigid body with a defined 93° cutting angle, this toolholder minimises tool deflection during heavy cuts, which results in more consistent Diameters and longer Insert Life. The clear mechanical setup makes it easy to swap inserts without compromising alignment. Simple Compatibility That Saves Setup Time Designed for direct use with VCMT 1604 inserts, the holder’s standardised geometry and ISO SVJCR 1616 designation speed up tooling selection and changeover. For workshops that run multiple jobs, the compatibility with common inserts reduces inventory complexity and shortens machine downtime. The 100 mm Overall Length provides a balanced reach suitable for many turning tasks without unnecessary overhang. Tailored for Professional Workshops and CNC Lathes This clamping holder is intended for machinists and production shops requiring repeatable, right-hand turning operations. Its right-hand cutting direction and 20 mm Cutting Head Width support reliable chip control and process stability on medium-duty turning cycles. For operators who value predictable results, the holder offers a practical combination of robustness and predictable tool behaviour. Clear Technical Design, Easy to Understand If “cutting angle” or “indexable insert” are new terms, the cutting angle refers to the geometric relationship between the insert and workpiece that influences chip flow and surface quality, while an indexable insert is a replaceable cutting tip that can be rotated or exchanged when worn. This holder’s straightforward design makes these advantages accessible even in less complex setups, allowing users to focus on machining rather than complicated adjustments. Secure Teknik Makina’s Turning Holder for dependable turning accuracy and contact METAV Werkzeuge for expert advice and application support — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Turning Holder (Klemmhalter) Brand: Teknik Makina SKU: D244TM Compatible Inserts: VCMT 1604 Overall Length: 100 mm Weight: 0.195 kg ISO Designation: SVJCR 1616 Alternate Designation: H16 Width: 16 mm Height: 16 mm Cutting Head Width: 20 mm Cutting Direction: right Cutting Angle: 93° GTIN: 4061905153891 Condition: new Availability: in Stock Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder by Teknik Makina and what benefit do they provide? The Turning Holder from Teknik Makina is made for VCMT 1604 indexable inserts, which allow quick replacement and consistent cutting geometry for improved Surface Finish and lower downtime. Can the Turning Holder by Teknik Makina be used on CNC lathes for batch production? Yes, the Turning Holder by Teknik Makina is suitable for CNC lathe operations; its 100 mm Length and rigid clamping make it appropriate for repeated right-hand turning cycles in production environments. How does the 93° cutting angle of the Teknik Makina Turning Holder affect machining? A 93° cutting angle on the Teknik Makina Turning Holder promotes stable chip evacuation and reduces radial cutting forces, helping to achieve consistent diameters and extend Insert Life. Who should I contact if I need help choosing the correct Turning Holder from Teknik Makina? If you are unsure whether the Teknik Makina Turning Holder meets your requirements, METAV Werkzeuge offers expert advice — eMail: info@metav-werkzeuge.com or Tel: +49 2822 7131930. 93° SVJCR 1616 Turning Holder for VCMT 1604 Indexable Inserts, 100mm Length - Teknik Makina

Turning Holder (Klemmhalter) — SVVBN for VBMT Indexable Inserts by Teknik Makina A robust Turning Holder designed to clamp VBMT 1604 indexable inserts securely for precision turning and finishing operations. SVVBN 1616 design for VBMT 1604 inserts 100 mm overall length for stable reach 16 mm width and height for rigid support 72.5° cutting angle for consistent chip control Suitable for precision turning and finishing Maximise Turning Precision with Reliable Clamping The Turning Holder provides consistent, repeatable clamping for VBMT 1604 indexable inserts, delivering high positional stability during cuts. Its SVVBN 1616 geometry ensures correct seating of the insert and reduces micro-movements that create chatter. For workshops focused on tight tolerances, this tool holder translates insert performance into predictable part quality, making setup reproducible and reducing scrap rates. Compact Design That Boosts Rigidity and Accessibility With an overall length of 100 mm and a cross-section of 16 mm by 16 mm, the holder balances reach and stiffness to minimise tool deflection. The 8 mm cutting-head width concentrates support where it matters most, while the 72.5° cutting angle promotes controlled chip flow and consistent surface finishes. An indexable insert is a replaceable cutting tip; using such inserts with a stable holder reduces downtime and simplifies maintenance for less experienced operators. Designed for Workshops and Precision Machine Shops This clamping solution is aimed at professional users who require dependable tool performance during finishing and medium-turning operations. The H16 shank designation supports secure mounting and simple replacement routines, lowering setup times. As a result, operators gain efficiency: fewer adjustments, more parts per shift, and improved consistency across production runs. The overall construction supports both manual and CNC lathes when matched to appropriate toolposts. Easy Handling, Low Maintenance, Proven Manufacturer Support The holder's straightforward clamping principle allows fast insert changes and minimal tooling overhead, contributing to lower lifecycle costs. The SVVBN configuration and material choices from Teknik Makina are designed for long-term dimensional stability, which reduces frequency of regrinding or replacement of adjacent components. For complex applications or specific material challenges, the robust design simplifies troubleshooting and tool selection. We recommend Teknik Makina’s Turning Holder for reliable, precision clamping — for expert advice and ordering, contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271). Bezeichnung: Klemmhalter Brand: Teknik Makina SKU: D132TM Suitable Inserts: VBMT 1604 ISO Designation: SVVBN 1616 Secondary Designation: H16 Overall Length: 100 mm Width: 16 mm Height: 16 mm Cutting Head Width: 8 mm Cutting Angle: 72.5° Weight: 0.184 kg GTIN: 4061905153754 Condition: new Availability: in Stock ECLASS: 21181004 Product Type: VARIANT Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder by Teknik Makina? The Turning Holder (Klemmhalter) from Teknik Makina is designed specifically for VBMT 1604 indexable inserts, ensuring secure seating and optimal cutting alignment when used with the matching insert geometry. What are the key dimensions I should check for compatibility? For the Turning Holder (Klemmhalter) by Teknik Makina check the overall length of 100 mm, the 16 mm width and height, and the H16 designation to confirm fit with your toolpost and machine setup. How does the 72.5° cutting angle affect machining? The 72.5° cutting angle on the Teknik Makina Turning Holder promotes consistent chip control and a stable cutting edge engagement, which helps achieve smoother surface finishes in finishing operations. Where can I get technical advice or order the Turning Holder? If you need application support or further technical data for the Turning Holder (Klemmhalter) by Teknik Makina, METAV Werkzeuge provides expert consultation — contact info@metav-werkzeuge.com, call +49 2822 7131930, or message via WhatsApp at +49 170 2837271. 72.5° SVVBN 1616 Turning Holder for VBMT 1604, 100mm Length - Teknik Makina

Turning Holder — Clamping Tool for DN-- 1506 Indexable Inserts by Teknik Makina The Turning Holder is a precision clamping tool designed for secure mounting of DN-- 1506 indexable inserts, optimised for stable turning operations in metalworking. Turning Holder DDHNL 2020 for DN-- 1506 inserts Robust clamping design with 107.5° cutting angle 125 mm overall length for stable tool engagement 25 mm cutting head width for secure insert support Left-hand machining orientation for turning operations Precision Clamping for Consistent Surface Finish Thanks to the DDHNL 2020 clamping concept, this holder provides a firm and repeatable grip for DN-- 1506 indexable inserts, reducing micro-movement during cuts. Reduced vibration improves Surface Finish and extends Insert Life by minimising wear. The secure seating also simplifies setup checks, so operators achieve consistent results with less rework. For users who value repeatability, this toolholder brings measurable process reliability. Compact Length with Enhanced Rigidity With an overall length of 125 mm and a cutting head width of 25 mm, the design balances accessibility and stiffness for many turning applications. The 20 mm x 20 mm shank dimensions provide a rigid connection to the toolpost, supporting heavier cuts without excessive deflection. This compact geometry makes the holder suitable for medium-duty internal and external turning where stable cutting conditions are required. Designed for Left-Hand Turning and Effective Chip Control The Turning Holder is specified for left-hand turning and features a 107.5° cutting angle that supports predictable chip flow and cutting forces. The specified angle helps direct chips away from the workpiece and tool, improving operational safety and reducing the need for manual intervention. Compatibility with standard DN-- 1506 inserts simplifies tooling selection and changeover in mixed-machine environments. Suited for Workshops and Precision Turning Tasks This holder is aimed at professional workshops and manufacturers that rely on indexable tooling for productivity. It is particularly useful where repeatable positioning, straightforward insert replacement and robust clamping are priorities. The straightforward ISO designation and standard interfaces allow easy integration into existing tool inventories, helping reduce setup time and tooling complexity. We recommend Teknik Makina's Turning Holder for precision left-hand turning operations — for technical advice or to confirm suitability for your application, contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930; WhatsApp +49 170 2837271. Turning Holder Brand: Teknik Makina SKU: D295TM For Indexable Inserts: DN-- 1506 Compatible Inserts: DN-- 1506 Overall Length: 125 mm Weight: 0.428 kg ISO Designation: DDHNL 2020 Secondary Designation: K15 Width: 20 mm Height: 20 mm Cutting Head Width: 25 mm Cutting Angle: 107.5° Cutting Direction: Left GTIN: 4061905150814 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Turning Holder from Teknik Makina is designed specifically for DN-- 1506 indexable inserts, ensuring correct seating and clamping for that insert family. Is the Turning Holder suitable for heavy-duty turning? The Teknik Makina Turning Holder offers a rigid 20 mm x 20 mm shank and a 125 mm overall length which supports medium-duty turning; for extreme heavy cuts, review machine and insert specifications with METAV Werkzeuge. How does the 107.5° cutting angle affect performance of the Turning Holder? A 107.5° cutting angle on the Teknik Makina Turning Holder promotes controlled chip flow and predictable cutting forces, which can enhance surface finish and reduce tool interference. Can METAV Werkzeuge advise on whether the Turning Holder fits my tooling setup? Yes, METAV Werkzeuge provides comprehensive consulting for the Teknik Makina Turning Holder — contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised support. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D295TM","sku":"D295TM","mpn":"DDHNL 2020","gtin13":"4061905150814","name":"Klemmhalter DDHNL 2020 107.5° DN-- 1506","description":"Turning holder for DN-- 1506 indexable inserts, 125 mm length, ISO DDHNL 2020; robust 20x20 mm body with 25 mm cutting head width; left-hand cut; weight 0.428 kg.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/05/8d/e2/62/62e28d05a9cff922f4706cc6/d295tm-main.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/da/7e/de/62/62de7eda33927e49dbf32783/d295tm-technische-zeichnung.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/3e/7e/de/62/62de7e3e148ec6b71020ff83/d295tm-artikelliste.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"For Indexable Inserts","value":"DN-- 1506"},{"@type":"PropertyValue","name":"Overall Length","value":"125 mm"},{"@type":"PropertyValue","name":"Weight","value":"0.428 kg"},{"@type":"PropertyValue","name":"ISO Designation","value":"DDHNL 2020"},{"@type":"PropertyValue","name":"Designation 2","value":"K15"},{"@type":"PropertyValue","name":"Width","value":"20 mm"},{"@type":"PropertyValue","name":"Height","value":"20 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"25 mm"},{"@type":"PropertyValue","name":"Cutting Direction","value":"Left"},{"@type":"PropertyValue","name":"Cutting Angle","value":"107.5°"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What inserts does this holder accept?","acceptedAnswer":{"@type":"Answer","text":"Compatible with DN-- 1506 indexable inserts."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 125 mm."}},{"@type":"Question","name":"What is the ISO designation?","acceptedAnswer":{"@type":"Answer","text":"ISO designation DDHNL 2020."}},{"@type":"Question","name":"What is the cutting direction?","acceptedAnswer":{"@type":"Answer","text":"Left-hand cutting direction."}},{"@type":"Question","name":"What are the main dimensions?","acceptedAnswer":{"@type":"Answer","text":"Body width 20 mm, height 20 mm, cutting head width 25 mm; weight 0.428 kg."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/klemmhalter-ddhnl-2020-107.5-dn--1506","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder"},{"@type":"Thing","name":"Indexable Inserts DN-- 1506"},{"@type":"Thing","name":"Left-Hand Cutting Tools"}],"mentions":[{"@type":"Thing","name":"Teknik Makina"},{"@type":"Thing","name":"ISO DDHNL 2020"},{"@type":"Thing","name":"K15 designator"}]}]}

Clamp Holder SDHC for DCMT Indexable Inserts — Turning Holder by Teknik Makina The Clamp Holder SDHC for DCMT Indexable Inserts is a robust Turning Holder engineered for secure clamping and precise 107.5° cutting performance in professional turning operations. Clamp holder for DCMT 11T3 inserts 107.5° cutting angle for accurate surfaces Removable screws enable quick insert change 125 mm overall length for versatile setups Stable clamping reduces vibration and rework Boost Productivity with Precise 107.5° Cutting The Clamp Holder SDHC for DCMT Indexable Inserts delivers measurable gains in Productivity by providing a consistent 107.5° cutting geometry that supports repeatable machining results. The defined cutting angle reduces manual adjustments and scrap rates, which translates into lower production costs and less rework. For workshops that measure output in cycle times and first-pass yield, this holder helps keep processes predictable and efficient. Fast Tool Changes and Reliable Clamping for Continuous Operation Designed with Quick Change in mind, the holder features easily removable screws that allow fast replacement of DCMT 11T3 inserts. This minimises machine downtime during regrinds or insert swaps and supports lean workflows on the shop floor. The Stable Clamping and precise seat alignment ensure the insert remains fixed during heavy cuts, reducing micro-movements that cause tool wear and poor surface finish. Versatile Use Across Materials and Turning Tasks This SDHC Clamp Holder is suitable for a broad range of turning applications, from finishing to semi‑roughing, and accepts the widely available DCMT 11T3 indexable inserts. Its 125 mm overall length and well-defined cutting-head width make it compatible with many turret and toolpost configurations, offering flexibility in set-up and part handling. Technical teams and operators will value the combination of adaptability and consistent cutting behaviour. Practical Advantages and What Indexable Inserts Mean for You Indexable inserts allow replacing only the cutting edge rather than the entire tool, which reduces tooling costs and shortens setup time. The holder’s compatibility with ISO-standard inserts provides access to a wide variety of grades and geometries for different workpiece materials. Choosing a system with standardised inserts supports predictable tool-life planning and easier inventory management, improving overall workshop economics. Highly recommended: For dependable turning performance and reduced setup time, choose the Teknik Makina Clamp Holder SDHC for DCMT Indexable Inserts — for expert advice and order support contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271). Technical Data Bezeichnung: Klemmhalter SDHC für DCMT Wendeplatten Marke: Teknik Makina SKU: D250TM For Indexable Inserts: DCMT 11T3 Compatible Inserts: DCMT 11T3 Overall Length: 125 mm Weight: 0.411 kg ISO Designation: SDHCR 2020 Secondary Designation: K11 Width: 20 mm Height: 20 mm Cutting-Head Width: 25 mm Cutting Angle: 107.5° Cutting Direction: right GTIN: 4061905153488 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Clamp Holder SDHC for DCMT Indexable Inserts from Teknik Makina? The Clamp Holder SDHC for DCMT Indexable Inserts by Teknik Makina is designed for standard DCMT 11T3 indexable inserts; using the specified insert type ensures correct seating, reliable clamping, and the intended 107.5° cutting geometry. How do I change the insert on the Teknik Makina Clamp Holder SDHC for DCMT Indexable Inserts? To replace an insert, loosen the removable clamping screw, remove the worn DCMT 11T3 insert, seat the new insert correctly and re-tighten the screw; this straightforward process minimises downtime and keeps the Turning Holder ready for immediate production. Which applications are best suited for the Clamp Holder SDHC for DCMT Indexable Inserts? The Clamp Holder SDHC for DCMT Indexable Inserts is suited to a wide range of turning tasks—finishing and semi‑roughing—across various materials; its stable clamping and standard insert compatibility make it a practical choice for demanding workshop environments. Need help selecting the right variant or further technical data for this Turning Holder? METAV Werkzeuge offers competent advice for tooling selection; if you’re unsure whether this Clamp Holder SDHC for DCMT Indexable Inserts matches your requirements, contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271 for personalised support. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D250TM","sku":"D250TM","mpn":"D250TM","gtin13":"4061905153488","name":"Clamp Holder SDHCR 2020 107.5° DCMT 11T3","description":"Clamp holder SDHC for DCMT indexable inserts, 107.5° cutting angle, 125 mm overall length, compatible with DCMT 11T3; robust aluminium construction; fast tool changes for high productivity.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/60/13/35/64/64351360edeb9298707ad344/d250tm-main.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/2c/7e/de/62/62de7e2c0f56dbb4de4dbeeb/d250tm-artikelliste.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/cf/7e/de/62/62de7ecf0f56dbb4de4dbf3d/d250tm-technische-zeichnung.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"For indexable inserts","value":"DCMT 11T3"},{"@type":"PropertyValue","name":"Cutting angle","value":"107.5°"},{"@type":"PropertyValue","name":"Overall length","value":"125 mm"},{"@type":"PropertyValue","name":"Cutting head width","value":"25 mm"},{"@type":"PropertyValue","name":"Width","value":"20 mm"},{"@type":"PropertyValue","name":"Height","value":"20 mm"},{"@type":"PropertyValue","name":"ISO designation","value":"SDHCR 2020"},{"@type":"PropertyValue","name":"Manufacturer","value":"Teknik Makina"},{"@type":"PropertyValue","name":"Weight","value":"0.411 kg"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What inserts fit this clamp holder?","acceptedAnswer":{"@type":"Answer","text":"Compatible with DCMT 11T3 indexable inserts."}},{"@type":"Question","name":"What is the cutting angle?","acceptedAnswer":{"@type":"Answer","text":"The clamp holder features a 107.5° cutting angle for precise surface finishes."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 125 mm."}},{"@type":"Question","name":"What is the cutting head width?","acceptedAnswer":{"@type":"Answer","text":"Cutting head width is 25 mm."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Manufacturer: Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/d250tm","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Clamp holder SDHC for DCMT indexable inserts"},{"@type":"Thing","name":"Allround turning applications"},{"@type":"Thing","name":"High productivity through quick insert change"}],"mentions":[{"@type":"Thing","name":"DCMT 11T3 inserts"},{"@type":"Thing","name":"107.5° cutting angle"},{"@type":"Thing","name":"SDHCR 2020 designation"},{"@type":"Thing","name":"Teknik Makina clamp holder"}]}]}

Turning Holder by Teknik Makina The Turning Holder is a precision clamping tool for DN-- 1506 indexable inserts, designed to speed up insert changes and deliver stable, repeatable turning results in professional workshops. Turning Holder for DN-- 1506 Inserts 107.5° Cutting Angle for precise surfaces Quick insert change with easy screw release Robust 125 mm length for stable positioning ISO DDHNR 2020 form, compatible system parts Reduce setup time with fast, reliable insert changes The Turning Holder enables a quick tool change workflow by allowing straightforward loosening and fastening of the clamping screw. This design reduces non-productive time during tool changes and supports higher machine uptime. By replacing only the worn insert instead of the complete tool, workshops achieve measurable savings in tooling costs and preparation time while maintaining consistent process flow. Achieve consistent surface quality and low vibration With a precise 107.5° cutting angle the holder promotes stable contact geometry between insert and workpiece, resulting in improved surface finish and reduced vibration. This advantage benefits high-precision turning tasks and helps maintain repeatability across serial parts. The stable seating of the insert also lowers the risk of micro-movements that can degrade dimensional accuracy during finishing operations. Broad compatibility and compact dimensions for flexible setups Designed for all ISO indexable inserts DN-- 1506, the holder follows the DDHNR 2020 family standard and fits into common tool systems. Key dimensions—125 mm overall length, 20 mm Width and 20 mm Height, with a 25 mm cutting head width—allow compact installation in tight turrets while preserving rigidity. This compatibility simplifies stocking and ensures rapid integration into existing turning centres. Intended for professional turning operations and efficient workflows This clamping solution is aimed at machinists and production engineers who require dependable insert retention and low retooling times. By enabling targeted replacement of cutting edges, the Turning Holder supports lean tool management and contributes to predictable production costs. For complex machining questions or specific set-up requirements, experienced advice is available to tailor the tool to your process. Strong recommendation: For precision turning tasks where changeover speed and surface quality matter, choose the Teknik Makina Turning Holder and consult METAV Werkzeuge for expert support — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical Information Bezeichnung: Klemmhalter Marke: Teknik Makina SKU: D096TM Passende Wendeschneidplatten: DN-- 1506 ISO Bezeichnung: DDHNR 2020 Bezeichnung 2: K15 Gesamtlänge: 125 mm Breite: 20 mm Höhe: 20 mm Schneidkopf Breite: 25 mm Schnittwinkel: 107.5° Schnittrichtung: right Gewicht: 0.428 kg GTIN: 4061905150784 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina and which operations are supported? The Turning Holder by Teknik Makina is compatible with ISO indexable inserts DN-- 1506 and is suitable for a wide range of turning operations including finishing and general turning, offering reliable seating and stable cutting geometry. How quickly can I change an insert on the Teknik Makina Turning Holder? Insert replacement on the Teknik Makina Turning Holder is designed to be fast: screws are accessible and the insert seats securely for rapid swap-out, reducing setup time and increasing machine availability. Is the Turning Holder suitable for high-precision finishing tasks? Yes, the Turning Holder from Teknik Makina, with its 107.5° cutting angle and rigid clamping, supports high-precision finishing by reducing vibration and ensuring repeatable insert positioning. Who can help if I need technical advice for integrating the Turning Holder into my workflow? METAV Werkzeuge provides competent consultation for the Teknik Makina Turning Holder; contact them at info@metav-werkzeuge.com, +49 2822 7131930 or WhatsApp +49 170 2837271 for tailored technical support. 107.5° Turning Holder DDHNR 2020 for DN-- 1506 Indexable Inserts, 125 mm – Teknik Makina

Technical Information: Order Number: C100TM Item: Back Face Milling usable with CCMT 060204 Indexable Inserts Brand: Teknik Makina Metric Information: Diameter: 10mm Cutting Edges: 1 Weight: 0.194kg Total length: 110mm Diameter max.: 18mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Comprehensive Technical Specifications: Item: End Mill Brand: Teknik Makina Order Number: S027TM usable with APMT 06 Indexable Inserts of Korloy Diameter: 10mm Angle: 90° Total length: 100mm Cutting Height: 30mm Cutting Edges: 2 Weight: 0.05kg Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Characteristics: Order Number: S009TM Item: End Mill usable with APMT 0602 Indexable Inserts the Hersteller's Korloy Brand: Teknik Makina Structural Details: Diameter: 10mm Cutting Edges: 2 Weight: 0.085kg Total length: 120mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Comprehensive Technical Specifications: Order Number: S003TM Item: End Mill usable with APMT 0602 Indexable Inserts the Hersteller's Korloy Brand: Teknik Makina Quantitative Specifications: Diameter: 10mm Cutting Edges: 2 Weight: 0.041kg Total length: 80mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Detailed Technical Data: Order Number: S222TM Item: End Mill usable with APMT 11T3 Indexable Inserts of Korloy Brand: Teknik Makina Numerical Representations: Diameter: 10mm Cutting Edges: 1 Weight: 0.059kg Total length: 85mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Characteristics: Order Number: S751TM Item: End Mill usable with ADMX 0702 Indexable Inserts of Pramet Brand: Teknik Makina Quantitative Specifications: Diameter: 10mm Cutting Edges: 2 Weight: 0.062kg Total length: 80mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Technical Information: Order Number: S623TM Item: End Mill usable with XOMX 0602 Indexable Inserts the Hersteller's SECO Brand: Teknik Makina Numbers and Data: Diameter: 10mm Cutting Edges: 2 Weight: 0.086kg Total length: 120mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Product Technical Details: Order Number: S010TM Item: End Mill usable with AXMT 0602 Indexable Inserts of Taegutec Brand: Teknik Makina Metric Information: Diameter: 10mm Cutting Edges: 2 Weight: 0.085kg Total length: 120mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Product Technical Specifications: Order Number: R084TM Item: End Mill usable with RDMW 0501 Indexable Inserts the Hersteller's Taegutec Brand: Teknik Makina Numbers and Data: Diameter: 10mm Cutting Edges: 2 Weight: 0.111kg Total length: 120mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Detailed Technical Data: Order Number: R082TM Item: End Mill usable with RDMW 0501 Indexable Inserts the Hersteller's Taegutec Brand: Teknik Makina Metric Information: Diameter: 10mm Cutting Edges: 2 Weight: 0.076kg Total length: 80mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Technical Specifications: Order Number: S372TM Item: End Mill usable with P32 10 Indexable Inserts of Walter Brand: Teknik Makina Numbers and Data: Diameter: 10mm Weight: 0.118kg Total length: 130mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Technical Information: Order Number: U030TM Item: Indexable Drill usable with QC-- 050204 Indexable Inserts of Korloy Brand: Teknik Makina Quantitative Characteristics: Diameter: 10mm Weight: 0.062kg Total length: 74.5mm Diameter Connection: 12mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Technical Data: Order Number: U12TM Item: Indexable Drill usable with XCMT 050204 Indexable Inserts of Korloy Brand: Teknik Makina Quantitative Characteristics: Diameter: 10mm Weight: 0.109kg Total length: 90mm Diameter Connection: 16mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Detailed Technical Data: Order Number: VT220TM Item: Modular End Mill usable with APMT 0603 Indexable Inserts the Hersteller's Korloy Brand: Teknik Makina Quantitative Characteristics: Diameter: 10mm Cutting Edges: 2 Weight: 0.01kg Total length: 40mm Thread: M6 Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Technical Data: Item: Chamfering Mill Angled Angle: 10° Brand: Teknik Makina Order Number: AH10TM usable with TCMT 1102 Indexable Inserts Diameter: 5mm - 27mm Weight: 0.241kg Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Characteristics: Order Number: AH15TM Item: Chamfering Mill Angled usable with TCMT 16T3 Indexable Inserts Brand: Teknik Makina Numbers and Data: Diameter: 5mm Weight: 0.37kg Diameter max.: 34mm Angle: 10° Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Detailed Technical Data: Item: Indexable Drill Brand: Teknik Makina Order Number: U18TM usable with XCMT 060204 Indexable Inserts the Hersteller's Korloy Diameter: 11,5mm Total length: 92mm Diameter Connection: 16mm Weight: 0.113kg Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com