Precise angle measurement for reliable machining setups
Angle measuring instruments and their variants such as inclinometers, goniometers and protractors provide exact determination of inclinations to ensure dimensional accuracy and process stability in metalworking and machine building. Designed for workshop use or laboratory quality control, these devices enable precise alignment of components and transfer of angle values onto workpieces, with options ranging from robust mechanical protractors to high-resolution digital inclinometers. Features like zeroing, hold and reverse display modes support efficient serial inspection and machine setup, while materials such as matt-chromed special steel or anodised aluminium ensure durability and resistance to coolants and workshop conditions.
4x90° Digital Inclinometer With Laser And Rechargeable Battery, 61x61mm Aluminium Housing, Auto-Off - Metav IndustryLine
Benefit from a compact, robust design combined with laser-guided alignment and a rechargeable lithium battery for dependable tilt measurement in workshop environments; the permanent magnet and directional display further speed repetitive tasks. Order the Digital Inclinometer 4×90° (M215.217) directly via Metav Werkzeuge or ask our consultants if needed. Digital Inclinometer 4×90° (M215.217) — compact aluminium inclinometer with laser and magnet Digital Inclinometer 4×90° (M215.217) is a compact electronic tilt gauge for rapid, repeatable angle checks across four 90° faces, suited to machine shops, assembly benches and site inspection. Compact 61 × 61 mm aluminium housing Built-in laser for fast alignment Permanent magnetic base for secure mounting Rechargeable 3.7 V lithium battery High precision that keeps production moving The instrument delivers a reliable accuracy of 0.2° and a readable graduation of 0.05°, making it a practical choice where quick verifiable angles matter. The ABS/REL function enables zeroing on an offset plane and performing relative angle checks without complex calculations, reducing setup time. For workshops that balance speed and repeatability, the combination of a clear digital readout and a fine resolution supports efficient quality control processes and fewer reworks. Designed for efficiency at the bench and on site A small, rigid aluminium housing (61 × 61 × 30.8 mm) and a permanent magnetic base mean the device holds steady on ferrous surfaces during measurement sequences, improving hands‑free operation. The laser provides a visual reference that speeds alignment of components and fixtures, which is particularly useful when checking perpendicularity or aligning machine tables. These features together result in measurable time savings during repetitive tasks and faster throughput. Intuitive display and dependable power management The digital display gives a directional readout and supports absolute and relative modes, so measurements are straightforward and understandable for operators with varying experience. Power is supplied by a rechargeable lithium battery (3.7 V) with automatic switch‑off after approximately three minutes of inactivity to conserve charge. The device is engineered to provide consistent indications so that angle data can be recorded quickly without ambiguity. Built for everyday workshop demands At just 0.2 kg, the tool is light enough for portable use yet solid enough to resist handling errors. The external surfaces are robust and the compact footprint fits tight workspaces and fixtures. The overall design emphasises repeatability and ease of use rather than unnecessary complexity, making it suitable as a routine inspection tool in production, assembly and maintenance environments. For precise, compact tilt measurement rely on Metav IndustryLine’s M215.217 — contact Metav Werkzeuge for ordering and application advice and benefit from local stock and technical consultancy in Emmerich. Technical data Article number: M215.217 GTIN: 4054469182506 Label: Digital-Neigungsmessgerät 4 x 90°, Laser, 61 x 61 mm Alu-Gehäuse+Laser+Magnet Core specifications Measuring range: 4 × 90° Accuracy: 0.2° Reading: 0.05° Dimensions: 61 × 61 × 30.8 mm Weight: 0.2 kg Battery: Rechargeable lithium battery 3.7 V Features and materials Material: Aluminium housing Digital display with ABS/REL function and directional indication Built-in laser for visual alignment Permanent magnet base for secure mounting Automatic switch-off after approximately 3 minutes FAQ What measuring range does this inclinometer cover? The Digital Inclinometer 4×90° (M215.217) measures across four 90° faces, enabling angle checks in each quadrant for alignment and squareness tasks. How accurate is the instrument for workshop inspections? This model offers an accuracy of 0.2° with a readable graduation of 0.05°, suitable for routine machine‑shop and assembly inspections. Can the device be used hands‑free on machine tables? Yes, the permanent magnetic base and compact aluminium housing allow the M215.217 to secure to ferrous surfaces for hands‑free measurements. How is the battery managed and what power supply does it use? The inclinometer uses a rechargeable 3.7 V lithium battery and includes an automatic switch‑off after about three minutes to conserve charge. Is the display capable of zeroing or relative measurements? The digital display supports ABS/REL functionality, enabling absolute readings and relative angle comparisons without external calculations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4x90° Digital Inclinometer With Permanent Magnet, 0.5° Accuracy, Plastic Housing - Metav IndustryLine
Take advantage of precise, repeatable angle checks with a compact, magnet-mounted device that combines 0.5° accuracy, an auto-orienting digital display and lightweight handling for fast alignment tasks; order directly via Metav Werkzeuge or ask the consultants for application advice. M215.207.A3 — Digital inclinometer with permanent magnet (Metav IndustryLine) The M215.207.A3 is a compact digital inclinometer designed for rapid angle checks on ferrous surfaces, combining a secure magnetic base with an auto-orienting display for clear readings in confined setups 4 x 90° measurement range 0.5° accuracy and 0.5° resolution Permanent magnet for secure attachment Compact plastic housing, lightweight 0.2 kg Accurate angle control for workshop and inspection The device delivers 0.5° accuracy, making it well suited to alignment, setup and quality checks where repeatable angular information is required. The digital, auto-orienting display ensures the reading is presented the right way up regardless of how the unit is mounted, reducing interpretation errors and saving time during repetitive tasks. In industrial metrology contexts this combination supports faster setup cycles and more reliable process control. Secure mounting and ease of measurement A built‑in permanent magnet provides immediate attachment to steel surfaces, enabling hands‑free measurement that stabilises the instrument and minimises operator influence on the result. The unit’s lightweight plastic housing (0.2 kg) and compact dimensions make it easy to position in tight assemblies or on machine beds, while the clear digital readout removes ambiguity common with analogue indicators. These features increase throughput by simplifying repetitive alignment tasks. Practical design for everyday use Power is supplied by an AAA battery (included) for straightforward field use without special chargers. The instrument’s 4 x 90° measurement range covers all quadrants typically required in mechanical and assembly work, while the moderate resolution supports quick assessment and decision making on the shop floor. For procurement teams seeking a cost‑effective metrology tool, the unit offers a balance of portability, repeatability and functional clarity. Contact Metav Werkzeuge today for tailored advice or to reserve the M215.207.A3 for your workshop; their specialists can confirm compatibility with specific applications and delivery options Technical Data Article number: M215.207.A3 GTIN: 4054469146201 Manufacturer: Metav IndustryLine Facts Weight: 0.2 kg Dimensions: 55 x 56 x 19 mm Measurement range: 4 x 90° Accuracy: 0.5° Resolution / reading: 0.5° Display type: Digital, auto-orienting Power supply: AAA battery (included) ECLASS: 21170321 Tariff number: 90318080 Special features Housing material: plastic Permanent magnet base for attachment Compact, portable form factor Ideal for alignment and setup tasks FAQ How precise is the inclinometer for alignment tasks? The M215.207.A3 provides an accuracy of 0.5° with a 0.5° reading increment, suitable for standard alignment and workshop inspection tasks where that tolerance meets process requirements. Can the device be used hands‑free on machine beds? Yes, the built‑in permanent magnet secures the unit to ferrous surfaces, allowing hands‑free measurements and stabilised readings during setup or inspection. What power source does the inclinometer use and is it supplied? The instrument uses an AAA battery, which is supplied with the device for immediate use on delivery. Is the display legible in tight or rotated positions? The inclinometer features an auto-orienting digital display that automatically rotates the readout so the value appears the right way up, improving legibility in confined or rotated mounting positions. Which applications is this device best suited to? The design and feature set make it appropriate for general machine setup, fixture alignment and on‑site inspection where compact, repeatable angular checks are required; Metav IndustryLine positions it as a practical shop‑floor inclinometer. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4x90° Inclinometer Digital Display With On/Off, %/Hold, ABS/Zero Buttons, Stainless Steel Frame - Metav IndustryLine
Combine compact dimensions, a stainless steel frame and a clear digital display with ABS/ZERO and HOLD for repeatable angle checks. Benefit from precise readings across a 4 × 90° measurement range and order the inclinometer directly via Metav Werkzeuge or consult our advisors for specification support. M215.209 Digital inclinometer — compact, high-resolution angle gauge (Metav IndustryLine) A M215.209 digital inclinometer designed for accurate angle measurement in workshop and inspection environments, offering a robust stainless-steel frame and simple digital controls for reliable alignment tasks. Digital display with ABS/ZERO and HOLD Resolution 0.1° for clear readings Stainless steel frame for lasting durability Compact 54 x 54 x 20 mm footprint Accurate measurement for reliable set-up and verification The device delivers high repeatability thanks to its electronic sensing and a resolution of 0.1°, which provides unambiguous readouts for alignment and setup work. Accuracy is specified as 0.2° up to 15° and 0.5° from 15° to 90°, allowing a clear classification of expected measurement uncertainty for both small tilt checks and larger angular adjustments. This degree of precision supports rational decision-making in assembly and inspection processes, reducing rework and downtime. Clear digital functions that speed up inspection workflows A straightforward control layout with ABS/ZERO, HOLD, percentage readout and ON/OFF functions simplifies repeated measurements and data capture. The ABS/ZERO key allows quick switching between absolute and relative measurement modes, so comparative tasks and multi-step alignments are completed faster. The HOLD function freezes the reading for documentation or comparison, which is particularly useful when working in confined or awkward positions. Robust construction suited to daily workshop use Built with a stainless steel frame, the instrument resists shop-floor wear and maintains mechanical integrity over long service intervals. The compact 54 × 54 × 20 mm footprint and a weight of 0.2 kg make the unit easy to handle and position, while the corrosion-resistant frame supports use in varied environments. These design choices translate into lower total cost of ownership through extended service life and fewer replacements. Versatile measurement range for alignment tasks The inclinometer covers 4 × 90° sectors, effectively providing full angular coverage as required for many alignment and fixturing applications. The compact form factor and readable display make it well suited to machine tool set-up, jig and fixture verification, and in-process checks where quick, rational measurement results are required to keep production moving. Integration into existing quality routines is straightforward thanks to familiar display functions and stable mechanical construction. For precise angle checks in the workshop, request the Metav IndustryLine M215.209 from Metav Werkzeuge or contact our consultants for tailored advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M215.209 GTIN: 4054469109985 eClass: 21170321 SKU: M215.209 Facts Measurement range: 4 × 90° Resolution: 0.1° Accuracy: 0.2° up to 15°; 0.5° from 15° to 90° Dimensions: 54 x 54 x 20 mm Weight: 0.2 kg Special features Digital display with ON/OFF, %-, HOLD and ABS/ZERO keys Frame made from stainless steel Digital instrument (electronic sensing) Compact footprint for confined work areas FAQ What angular range does this instrument cover? The M215.209 inclinometer from Metav IndustryLine measures across 4 × 90° sectors, providing effective full-angle coverage for alignment and set-up tasks. How precise are the readings? Precision is specified as 0.2° for angles up to 15° and 0.5° for angles between 15° and 90°, with a display resolution of 0.1° to aid repeatable measurements. Which display functions are available for measurement tasks? The unit features ON/OFF, percentage readout, HOLD and ABS/ZERO functions to support absolute and relative measurements and to freeze values for documentation. Is the instrument suitable for regular workshop use? Yes. The stainless-steel frame and compact form factor make the device durable and easy to handle on the shop floor for routine alignment and inspection. How large and heavy is the inclinometer for handling and mounting? The footprint is 54 x 54 x 20 mm and the weight is 0.2 kg, allowing straightforward positioning in confined spaces and simple manual handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Bubble Vial 10 Arc Minutes, External Diameter - Bayerische Maß-Industrie Arno Keller GmbH
Take advantage of precise levelling with a compact, 50 mm circular spirit level that delivers 10 arc minute sensitivity for reliable alignment in fixtures and panels; order direct from Metav Werkzeuge or ask the consultants for application advice. Circular spirit level – 50 mm, 10 arc minute sensitivity Circular spirit level "Dosenlibelle 50mm 10 min BMI" for quick horizontal indication in assemblies and instruments Compact 50 mm outer diameter 10 arc minute sensitivity Circular spirit level design Precision alignment where small deviations matter The circular spirit level provides a clear, central bubble indication for horizontal alignment. With a sensitivity of 10 arc minutes (one sixth of a degree), small inclination differences are made visible, allowing precise positioning of machinery components and jigs. The sensitivity is explained in practical terms: finer graduations mean smaller angular deviations are detectable, which reduces rework and improves assembly repeatability. This level is especially suited where repeatable, verifiable levelling is required rather than approximate orientation. Space-saving form for compact installations A reduced outer diameter of 50 mm allows the unit to be integrated into control panels, instrument housings and small fixtures without compromising readability. The compact format supports installation in tight locations and on curved surfaces where larger vials are impractical. Ease of integration is supported by the circular geometry, which centres the indication and simplifies visual checks during machine set-up or calibration tasks. Clear indication and dependable use in production The central bubble is designed for quick visual interpretation, which streamlines adjustment cycles on the shop floor and in workshop fixtures. The device is a dedicated levelling aid intended for alignment tasks in assembly, inspection fixtures and instrumentation panels; its form factor and sensitivity make it a practical choice for repetitive alignment work. For further technical clarification or to confirm suitability in a specific application, additional data can be provided on request via Metav Werkzeuge. For specification guidance or to order this circular spirit level directly, contact Metav Werkzeuge for tailored assistance from Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000857465NW SKU: 4000857465NW Product type: Circular spirit level Key specifications Outer diameter: 50 mm Sensitivity: 10 arc minutes Packaging unit: 1 Features Label: Dosenlibelle 50mm 10 min BMI Manufacturer: Bayerische Maß-Industrie Arno Keller GmbH UID: 4000857465NW FAQ What level of sensitivity does this unit provide? The circular spirit level offers a sensitivity of 10 arc minutes, enabling detection of small angular deviations for accurate alignment. What is the diameter of the vial? The outer diameter is 50 mm, which supports integration into compact panels and fixtures. For which applications is this spirit level suitable? The product is intended for horizontal alignment tasks in assemblies, inspection fixtures and instrument housings where compact, repeatable levelling is needed. Is this product identified by a specific article number? Yes, the item is listed under article number 4000857465NW and labelled as Dosenlibelle 50mm 10 min BMI Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Digital Inclinometer 0.1° Resolution, Aluminium Housing With Permanent Magnet, IP54 - Metav IndustryLine
Benefit from precise angle measurements, a compact 50 mm contact face and a robust IP54 aluminium housing with a permanent magnet — ideal for repeatable alignment tasks. Order the Metav IndustryLine inclinometer directly via Metav Werkzeuge or consult our specialists for application advice. Digital inclinometer M215.207 — 50 mm contact face, 0.1° resolution, IP54 aluminium housing (Metav IndustryLine) A compact Digital inclinometer M215.207 for fast angle checks and machine set‑up across four 90° ranges, designed for workshop and maintenance use. High‑resolution 0.1° digital display Robust IP54 aluminium housing Integrated permanent magnet mounting Quick ABS/ZERO and HOLD functions Faster, traceable angle checks with industrial accuracy The compact inclinometer delivers a 0.1° resolution and defined accuracy bands — ±0.2° up to 15° and ±0.5° from 15° to 90° — enabling reliable decisions during alignment and inspection. The four 90° segments (4 × 90°) give effective coverage for most fixturing and machine‑tool positions without complicated reorientation. These measurable parameters reduce setup time and increase the reproducibility of correction steps, making the tool suitable for routine quality checks and maintenance cycles. Workshop‑proof mounting and protection for everyday use Built around an aluminium housing with an integrated permanent magnet, the instrument fastens securely to steel surfaces for hands‑free operation, improving safety and consistency in measurements. Rated IP54, the construction resists dust ingress and splash water, so occasional exposure in a busy shop does not compromise function. The lightweight design (approx. 0.2 kg) and compact footprint support use on portable jigs as well as fixed machinery, offering a practical balance between durability and manoeuvrability. Clear controls and efficient inspection workflow The digital display is operated via straightforward keys (ON/OFF, HOLD, ABS/ZERO), simplifying zeroing on angled references and freezing readouts for transfer to check sheets. The readable numeric output expedites handover between setup and production, while the short‑cycle operation lowers downtime during repetitive adjustments. Supplied as a Metav IndustryLine product, the gauge complements modular tool sets for workshops aiming to standardise measurement routines and maintain consistent process quality. Contact Metav Werkzeuge to obtain the Metav IndustryLine M215.207 for robust workshop alignment or to request tailored application advice from our consultants in Emmerich Technical data SKU: M215.207 GTIN: 4054469109961 Tariff number: 90318080 Category: Angle measuring instruments Core data Measurement range: 4 x 90° Resolution: 0.1° Accuracy: ±0.2° (≤15°); ±0.5° (15°–90°) Dimensions: 50 x 51 x 33 mm Weight: 0.2 kg Protection class: IP54 eCl@ss: 21170321 Features Frame material: aluminium Special feature: permanent magnet Display: digital with ON/OFF, HOLD and ABS/ZERO keys Digital device: yes Story trigger / application hint: angle FAQ What level of precision can be expected from this inclinometer? The inclinometer achieves a resolution of 0.1° with specified accuracies of ±0.2° up to 15° and ±0.5° from 15°–90°, making it suitable for workshop alignment and routine inspection tasks using the Metav IndustryLine M215.207. Can the device be mounted on machine surfaces? Yes, the instrument includes an integrated permanent magnet that secures the unit to ferrous machine parts and fixtures for hands‑free measurements. Is the inclinometer suitable for use in a production environment with occasional splashes? The device has an IP54 rating, providing protection against dust and splashing water, so it is appropriate for standard shopfloor conditions but not for immersion. What is the effective measurement coverage of the gauge? The measurement range is organised in four 90° segments (4 × 90°), providing practical coverage for most alignment and tilt checks without complex reorientation. Which controls are available for zeroing and holding readings? The digital display offers ON/OFF, HOLD and ABS/ZERO functions to freeze measurements and set reference zero points quickly during setup. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Digital Inclinometer V-Base, Rotatable, 0.1° Resolution, Aluminium Housing, IP54, Magnetic - Metav IndustryLine
Benefit from precise 0.1° digital resolution and a magnetic V‑base for stable mounting; the compact aluminium housing with IP54 protection keeps readings reliable in workshop environments. Purchase the M215.210 directly from Metav Werkzeuge or contact our consultants for application advice. M215.210 Digital inclinometer – 50 mm V‑base, 0.1° resolution (Metav IndustryLine) A Digital inclinometer M215.210 designed for fast angle checks on shafts, fixtures and machine setups, featuring a V‑base with permanent magnet and a transverse prism for secure seating on flat and cylindrical surfaces. 50 mm V‑base with integral magnet Resolution 0.1° digital readout Aluminium housing, IP54 protection ON/OFF, HOLD and ABS/ZERO controls Stable mounting for fast, repeatable angle checks The compact V‑base and built‑in permanent magnet provide a secure mechanical interface that reduces movement during measurement, which speeds up repetitive checks and improves reproducibility on ferrous workpieces. The included transverse prism ensures stable contact on cylindrical parts such as shafts or pipes, so alignment and setup tasks can be completed with fewer repositionings. With a measurement configuration spanning 4×90°, the instrument covers full‑rotation applications without the need for frequent re‑clamping. Accurate digital readout with intuitive functions for production work Equipped with a digital display and tactile ON/OFF, HOLD and ABS/ZERO buttons, this tool allows quick zeroing and toggling between absolute and relative measurements for assembly and set‑up tasks. The 0.1° display resolution is paired with a declared accuracy of ±0.2° (from 0.2° to 15°) and ±0.5° (from 15° to 90°), delivering verifiable results for typical workshop tolerances. The straightforward controls reduce operator training time and minimise the risk of reading errors, supporting consistent process quality on the shop floor. Robust construction and workshop suitability for daily use A lightweight aluminium housing (approx. 0.22 kg) combines corrosion resistance with handy portability, while the IP54 ingress rating protects the electronics against dust and splashing water commonly found in industrial environments. The compact dimensions (50×65×33 mm) make the instrument easy to stow in tool kits or on inspection trolleys, while the solid build supports frequent handling and transport. The combination of mechanical stability, digital convenience and protective design makes the device a practical choice for fitters, tool‑room staff and quality inspectors who require rapid, repeatable angle verification. Contact Metav Werkzeuge for tailored advice on integrating the M215.210 into production workflows or to request application support from our Emmerich‑based specialists Technical data Article number: M215.210 GTIN: 4054469109992 Manufacturer: Metav IndustryLine ECLASS: 21170321 Customs tariff: 90173000 Facts Measuring range: 4×90° Resolution: 0.1° Accuracy: ±0.2° (0.2–15°), ±0.5° (15–90°) Weight: 0.22 kg Dimensions: 50×65×33 mm Protection class: IP54 Special features V‑base with transverse prism Permanent magnet Aluminium housing Digital display with ON/OFF, HOLD, ABS/ZERO Compact format for portable use FAQ What surfaces can the inclinometer measure reliably? The M215.210 measures reliably on flat ferrous surfaces via the V‑base and magnet; the transverse prism also allows stable contact on cylindrical parts such as shafts and pipes. How precise are the readings for assembly work? The instrument provides a 0.1° display resolution with an accuracy of ±0.2° in the 0.2°–15° range and ±0.5° from 15°–90°, suitable for routine workshop and machine‑setup tolerances. How does the ABS/ZERO function support repetitive tasks? The ABS/ZERO key lets the display be re‑zeroed quickly for relative measurements, enabling stepwise alignment and the direct comparison of angles without manual calculation. Is the inclinometer protected against workshop conditions? Yes; the aluminium housing and IP54 rating protect the instrument against dust ingress and splashing water typical in industrial environments, supporting daily use on the shop floor. Can the inclinometer be used for full‑rotation measurements? The device covers a measuring configuration of 4×90°, which provides the equivalent of full‑rotation capability for angle checks without repeated re‑clamping. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Digital Inclinometer V-Prism 0.1° Readout IP54 Aluminium Housing Magnet - Metav IndustryLine
Compact accuracy and workshop durability meet in this compact instrument: precise 0.1° resolution combined with a 50 mm V‑prism and permanent magnet base ensures rapid, repeatable angle checks on round and flat components. Order the Digital Inclinometer M215.208 directly via Metav Werkzeuge or ask our consultants if additional specifications are required. Digital Inclinometer M215.208 — 50 mm V‑prism, IP54 (Metav IndustryLine) Digital Inclinometer M215.208 for quick angle and tilt verification on shafts, fixtures and machined components with V‑prism seating and magnetic fixing 50 mm V‑prism for round and flat surfaces Resolution 0.1° digital readout Permanent magnet base for secure fixing IP54 aluminium housing for workshop use Fast, repeatable angular checks on shafts and fixtures The compact V‑prism seating and magnetic base turn manual alignments into a one‑step process: the V‑profile centres on cylindrical shafts while the magnet holds the unit securely on steel surfaces, enabling consistent repositioning without time‑consuming clamping. The device measures across a 4×90° range and provides a 0.1° resolution, which, together with the specified accuracy bands (±0.2° up to 15°; ±0.5° from 15°–90°), supports routine setup and acceptance checks in metalworking and maintenance tasks. This combination reduces rework and speeds up machine set‑ups. Digital functions that reduce measurement time and uncertainty A clear digital display with ON/OFF, HOLD and ABS/ZERO controls simplifies repeated or comparative measurements: the HOLD key locks a reading for transfer, while ABS/ZERO enables quick relative readings from a chosen reference plane. These functions cut measurement steps and minimise transcription errors during batch inspections. The instrument’s electronics are optimised for practical workshop use, delivering immediate numeric results that replace subjective bubble levels and visual estimates, so alignment tasks become measurable and traceable. Built for the workshop — robust, precise and portable The lightweight aluminium housing and IP54 rating protect internal components from dust and splashing coolant, preserving accuracy in everyday production environments. At approximately 0.22 kg and compact dimensions, the unit is easy to position and carry between stations, supporting portable inspection routines. The permanent magnet and longitudinal prism arrangement make the tool especially suitable for checks on lathe work, jig beds and assembly fixtures, providing a dependable combination of stability and accessibility that benefits both bench and on‑machine measurements. Contact Metav Werkzeuge for a tailored quotation or technical advice on the Digital Inclinometer M215.208 and discover how its magnetic V‑prism design can speed up alignment tasks at your shopfloor. Technical data Article number: M215.208 GTIN: 4054469109978 Category: Angle measuring devices Key specifications Measurement range: 4×90° Resolution: 0.1° Accuracy: ±0.2° up to 15°; ±0.5° from 15°–90° Dimensions: 50×60×33 mm Weight: 0.22 kg Protection class: IP54 Features Frame material: aluminium V‑prism (longitudinal) Permanent magnet base Digital display with ON/OFF, HOLD, ABS/ZERO Suitable for workshop and portable use FAQ How precise is the inclinometer for routine alignment? The Digital Inclinometer M215.208 delivers a 0.1° resolution with specified accuracy of ±0.2° up to 15° and ±0.5° from 15°–90°, suitable for standard machine‑shop and maintenance alignments. Can the tool be used on round shafts and flat surfaces? Yes, the V‑prism seating combined with the permanent magnet base allows secure positioning on both cylindrical shafts and flat ferrous surfaces for stable measurements. What display functions support comparative measurements? The instrument offers HOLD to freeze readings and ABS/ZERO to set a temporary reference, enabling relative measurements and quick comparative checks during inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Digital Inclinometer With Bubble Level, Permanent Magnet, IP54 - Metav IndustryLine
Take advantage of precise angle control, a compact 50 mm aluminium frame and practical mounting with a permanent magnet for repeatable alignment; order directly through Metav Werkzeuge or contact our consultants for technical advice. Digital inclinometer 50 mm — compact angle meter with 0.1° resolution and magnetic base (Metav IndustryLine) The Digital inclinometer 50 mm is a compact, workshop-ready angle measuring instrument for layout, alignment and quality checks across metalworking and installation tasks. Compact 50 mm aluminium frame High resolution 0.1° digital readout Permanent magnet and spirit level IP54 splash and dust protection Compact precision for tight setups and fixtures The small footprint and rigid aluminium frame deliver measured stability where space is limited, making the unit ideal for jigs, machine setups and on‑the‑bench checking. The sensor covers 4 x 90°, so angles across all four quadrants are measurable without repositioning the unit, and the 0.1° resolution ensures clear numerical feedback. This combination of compact design and fine readability reduces rework time and helps keep alignment tolerances consistent on small assemblies. Clear digital feedback and useful measurement controls A bright digital display with ON/OFF, HOLD and ABS/ZERO functions supports both absolute and relative measurements. The ABS/ZERO feature resets the reference to a new baseline which simplifies comparative checks and slope transfers; HOLD freezes a reading for easier recording when access is constrained. For users unfamiliar with digital inclinometers, the relative mode is especially helpful: it lets the device show deviations from a set starting angle rather than only absolute degrees, streamlining many alignment tasks. Designed for everyday workshop durability Rated IP54, the housing tolerates splashes and fine dust typical in metalworking environments, while a built‑in permanent magnet and a traditional spirit level (libella) provide versatile mounting and quick visual checks. The robust build supports frequent handling and rapid repositioning on ferrous surfaces, so measurement routines remain efficient. The instrument’s dimensions (50 x 64 x 33 mm) balance reach and manoeuvrability, enabling measured results where larger instruments would be unwieldy. Supports process reliability and documentation Accuracy is specified as 0.2° up to 15° and 0.5° between 15° and 90°, which aligns the tool with typical workshop tolerances and inspection tasks; the numeric readout improves traceability compared with purely analogue indicators. The device is particularly suitable for quality control steps that prioritise repeatability and quick verification rather than lab‑grade sub‑micron precision. Integrating this inclinometer into routine checks reduces downtime caused by misalignment and contributes to a smoother production flow. Contact Metav Werkzeuge for a detailed specification sheet or to arrange procurement of the Metav IndustryLine digital inclinometer M215.205 — our consultants will advise on compatibility with existing fixtures and measurement routines. Technical Data Article number: M215.205 GTIN: 4054469109954 Category: Winkelmessgeräte (angle measuring instruments) Data Dimensions: 50 x 64 x 33 mm Measurement range: 4 x 90° Resolution (readout): 0.1° Accuracy: 0.2° up to 15°; 0.5° from 15°–90° Protection class: IP54 Digital: yes eClass: 21170321 Customs tariff number: 90318080 Special features Frame material: aluminium Permanent magnet for mounting Integrated spirit level (libella) Digital display with ON/OFF, HOLD and ABS/ZERO Compact, workshop‑oriented design FAQ What is the smallest angle increment the inclinometer shows? The device displays angles at 0.1° increments; the Metav IndustryLine digital inclinometer M215.205 therefore provides fine readability for typical alignment tasks. Can the tool be used on vertical and inverted surfaces? Yes, the magnetic base and the 4 x 90° measurement range allow measurements in all four quadrants, and the spirit level helps with fast visual alignment before taking a digital reading. Is the instrument protected against workshop dirt and splashes? The unit is rated IP54, offering splash and dust protection suitable for standard workshop environments. How do the ABS and ZERO functions help in practice? ABS/ZERO sets a new reference angle for relative measurements, which is useful when transferring slopes or comparing parts; HOLD freezes the current reading for easier documentation. Which material is the housing made from? The frame is manufactured from aluminium, combining low weight with structural stiffness for repeatable readings. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
520mm 270° Angle Measuring Rule 20mm Leg Length, 270° Range - SOLA-Messwerkzeuge GmbH & Co KG
Product data conflict detected: the model designation is inconsistent — the field "typ" states "WMD 200", while the product label refers to "WMD 500". Additionally, leg length values contradict one another: the label specifies a leg length of 520 mm, but the supplementary entry indicates 20 mm. These discrepancies prevent creation of a reliable product description; please provide corrected or confirmed data to enable an accurate specification. It is crucial to resolve these inconsistencies to ensure the product information is accurate, as errors in data can lead to confusion, miscommunication, or potential issues in manufacturing, sales, and customer satisfaction.
55mm Digital Inclinometer 0.1° Foldable Display With Permanent Magnet, Dual Absolute/Relative Readout - Metav IndustryLine
Data inconsistency detected: the product information indicates that AAA batteries are included, while the product label explicitly states that batteries are not included. This discrepancy creates confusion for potential customers and may lead to misunderstandings regarding the product's features. It is essential to clarify whether the batteries are provided with the product or if customers need to purchase them separately. Please resolve this contradiction promptly to ensure that a complete and accurate product description can be produced. Providing clear and consistent information will help maintain customer trust and prevent any issues related to incorrect expectations about the product's contents.
55mm Longitudinal Spirit Level 38 Arc Minutes - Bayerische Maß-Industrie Arno Keller GmbH
Take advantage of the combination of compact size, measurable sensitivity and straightforward integration for accurate alignment in confined assemblies. Order the vial directly via Metav Werkzeuge or consult the specialists for compatibility and delivery from Emmerich. Longitudinal vial L 55 mm, 38 arc minutes – precision spirit level insert for alignment tasks Longitudinal vial L 55 mm, 38 arc minutes is a compact spirit level insert designed for precise alignment and levelling in jigs, fixtures and measuring assemblies 55 mm longitudinal vial insert Sensitivity 38 arc minutes Compact design for precision alignment Precision where space is limited The 55 mm length and 38 arc minutes sensitivity make this insert especially suitable for small fixtures and tight mounting positions where standard levels are too large. The measured sensitivity—expressed in arc minutes—indicates how far the bubble moves relative to angular deviation; 38 arc minutes corresponds to a reliable resolution for typical workshop alignment tasks. As a compact spirit level insert, the component enables repeatable alignment checks and reduces set-up time on assembly jigs and test rigs, helping to maintain throughput without sacrificing positional accuracy. Easy integration into tools and fixtures This longitudinal spirit level is intended as an insert for instrument housings, machine guards or bespoke fixtures, so design teams benefit from a compact footprint and straightforward incorporation into assemblies. The vial’s profile supports secure seating in recesses and can be used as a visual reference during machine alignment or component inspection. The functional design converts small angular errors into a clear bubble shift, allowing operators and technicians to make quick adjustments without complex instrumentation, thereby improving workflow efficiency in production and maintenance environments. Traceability, supply and workshop confidence Traceability is supported by the included identification data: label information and unique identifiers facilitate stock keeping and quality control in the supply chain. Supplied as single units, this insert suits workshops that require selective replacement or retrofitting. Partnership with an established distributor ensures consistent availability and shipment from a central European hub. Metav’s role as distributor further guarantees a reliable procurement channel and access to technical consultation when project specifications require confirmation or adaptation. Contact Metav Werkzeuge for specification checks and to arrange supply of the longitudinal vial L 55 mm, 38 arc minutes directly from Emmerich, including guidance on fixture integration and ordering options Technical data Article number: 4000857513NW Label: Dosenlibelle L.55mm 38 min Manufacturer: Bayerische Maß-Industrie Arno Keller GmbH Facts Length: 55 mm Sensitivity: 38 arc minutes Packaging unit: 1 Special features Longitudinal vial Intended for fixture and instrument insertion SKU / UID: 4000857513NW FAQ What level of sensitivity does the vial offer? The vial provides a sensitivity of 38 arc minutes, which allows the vial to detect relatively small angular deviations suited to workshop alignment and fixture levelling. Is the vial suitable for tight mounting positions? Yes, the 55 mm longitudinal format is designed as a compact insert for applications with limited installation space and for retrofit into existing fixtures. How is the product supplied and identified? The item is supplied as a single unit with label and identifiers; the article number 4000857513NW is used for traceability and stock management. Can the vial be used for routine machine alignment checks? The longitudinal spirit level insert is suitable for visual alignment and routine checks where a clear bubble indication of angular deviation is sufficient for adjustment decisions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60 x 12 mm Spirit Level With Round Vial And 0.29° (5/1000) Reading - Metav IndustryLine
Benefit from the combination of compact dimensions and fine sensitivity for reliable levelling in confined spaces; the round vial with graduation and a reading of 5/1000 (0.29°) supports fast, repeatable checks. Order the item directly via Metav Werkzeuge or consult their specialists for application advice. Spirit level 60 x 12 mm with graduated scale (Metav IndustryLine) The Spirit level 60 x 12 mm with scale is a compact precision vial intended for quick levelling and angle checks in workshops, maintenance and assembly tasks. Round vial with graduated scale Reading 5/1000 (0.29°) sensitivity Compact 60 x 12 mm dimensions Ideal for quick angle checks Precision where space is limited The compact format of this spirit level makes it suitable where surface area is restricted. The combination of a round vial and a graduated scale provides a clear visual reference while the instrument's small footprint—60 x 12 mm—allows access to narrow bores, edges and tight assembly points. The 5/1000 (0.29°) reading denotes a fine sensitivity that assists in detecting small deviations from true horizontal or vertical; this level of detail translates into more accurate setups and fewer iterative adjustments during installation or fabrication. Faster checks, improved repeatability A graduated vial simplifies comparative measurements and angle marking, reducing the need for repeated setups. The graduated scale enables quick transfer of an angle from one component to another and supports straightforward visual verification without auxiliary tools. Portability and a concise display make the instrument well suited for routine inspections, saving time in multi-step workflows and contributing to consistent results when similar measurements are carried out across multiple parts or stations. Practical fit for workshop routines Compact levelling tools of this type are commonly used in finishing, machine setup and small-part assembly where access is limited but precision remains essential. The straightforward design focuses on the measurement task: a clear vial, visible graduation and robust dimensions for handheld use. As part of Metav IndustryLine, the item benefits from the supplier’s role as a European quality filter, offering dependable stock and an industrially minded product range that supports both the trade and production environments. For a compact, high-sensitivity vial from Metav IndustryLine, order the spirit level directly from Metav Werkzeuge in Emmerich or contact their consultants for tailored application advice Technical data Article number: M203.022 (SKU) Manufacturer: Metav IndustryLine Description: Spirit level 60 x 12 mm with graduated scale UID: M203.022 Facts Reading: 5/1000 (0.29°) Dimensions: 60 x 12 mm Special features Round vial Graduated scale for angle comparison Compact format for confined spaces Intended use: quick levelling and angle checks FAQ What sensitivity does the spirit level provide? The spirit level provides a reading of 5/1000 (0.29°), enabling detection of small angular deviations for precise alignment. Where is this compact vial most useful? This compact vial is designed for confined spaces such as narrow machine parts, fittings and tight assembly areas where a standard level cannot be positioned. How is the graduated scale used in practice? The graduated scale allows comparative angle checks and transfer of set angles between components; centring the bubble against the graduation yields repeatable reference points. Is this product suitable for routine workshop inspections? Yes, the compact format and clear graduation make it well suited to routine inspections, machine setup and finishing tasks in production and maintenance environments. What are the dimensions and article number for ordering? Dimensions are 60 x 12 mm and the article number (SKU) is M203.022 Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Digital Spirit Level With Backlight, Magnetic Frame, 0.1°/99mm/m, Auto-Orient Display - Metav IndustryLine
Combining a 600 mm aluminium profile with a magnetic base and a bright, auto‑orienting digital display, this spirit level ensures rapid, repeatable angle checks on metal and structural assemblies. Order the instrument directly via Metav Werkzeuge or consult the sales team for application-specific advice. Digital spirit level M203.025 — 600 mm aluminium frame (Metav IndustryLine) The Digital spirit level M203.025 is a workshop and site instrument for precise angle and inclination measurement, featuring a 600 mm aluminium profile, magnetic attachment and a backlit, auto‑orienting display. 600 mm aluminium profile Digital display with backlight Magnetic base for secure attachment Precise measurement for productive workflows The instrument delivers ±90° measurement capability and an inclination specification expressed as 99 mm/m, combined with a readout granularity of 0.1°, which supports efficient setup and verification tasks. The digital display with INC/ABS functions simplifies transfer and differential measurements, while the HOLD button secures transient values for documentation. For routine shop and on‑site work, these features reduce rework and speed inspection cycles by making angular data immediately comparable and storable via the device controls. Secure placement and robust handling A magnetic base ensures stable fixing to steel surfaces and improves repeatability when checking frames, profiles and mounted assemblies. The 600 mm aluminium frame balances reach with rigidity: long enough for typical alignment work, yet stiff and compact enough for single‑person handling. At a mass of around 0.42 kg the instrument is lightweight without sacrificing the structural stability needed for reproducible readings in production and maintenance environments. Readability in low light and awkward positions The level is equipped with a backlit display that always shows data in the correct orientation, ensuring clear legibility whether the tool is held, clamped or inverted. The control set (ON/OFF, INC/ABS, HOLD and Light) makes the unit adaptable to different measuring routines: absolute and incremental modes allow direct comparison between reference and test positions, while the hold and light functions support documentation in poorly lit areas and during complex adjustments. Designed for everyday industrial use Constructed with an aluminium frame and a compact electronics package, the device combines portability with industrial usability. Batteries are standard consumer types (2x AAA, not supplied), which keeps running costs predictable and replacement simple at any site. The instrument is a practical choice for assembly shops, maintenance teams and installation crews that require a durable level with clear digital feedback and magnetic mounting for hands‑free checks. Contact Metav Werkzeuge today for tailored advice on Metav IndustryLine measuring tools and assistance selecting the right spirit level for specific applications — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M203.025 GTIN: 4054469165479 Eclass: 21160113 ETIM: EC000145 Tariff number: 90318080 Facts Length: 600 mm Weight: 0.42 kg Measurement range: ±90° / 99 mm/m Resolution / readout: 0.1° Material: Aluminium frame Features Magnetic base Digital display with ON/OFF, INC/ABS, HOLD and Light Backlight with auto‑orientation of display Batteries: 2x AAA (not included) Category: Angle measuring instruments FAQ Is the display readable in poor lighting conditions? The unit includes a backlit digital display and a Light button; the backlight plus the auto‑orientation feature keeps readings clear in low light. Which battery type does the instrument use and are batteries included? The device uses 2x AAA batteries; batteries are not supplied with the spirit level. Can the level be fixed to steel surfaces during measurement? Yes, the magnetic base secures the level to ferrous surfaces for stable, hands‑free measurements. What accuracy and resolution can be expected for angular readings? Angular values are shown with a readout step of 0.1°; the instrument covers ±90° and indicates inclination as 99 mm/m for slope comparisons. Is this instrument suitable for workshop and site use? The combination of a robust aluminium profile, magnetic mounting and a bright, auto‑orienting digital display makes the level suitable for both workshop and on‑site applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Digital Spirit Level With Magnet, Laser Marking Line, Backlit Display 4x90° Readout - Metav IndustryLine
Take advantage of the combination of a magnetic base, a backlit digital display and a robust aluminium frame for reliable alignment and fast, repeatable results; order the digital spirit level directly via Metav Werkzeuge or consult our specialists for application advice. Digital spirit level 60 cm with magnet and laser (M203.035) — Metav IndustryLine A Digital spirit level 60 cm with magnet and laser designed for precise alignment and angle verification across workshop and site applications Magnetic base for secure attachment Backlit display for low-light work Switchable laser for distance alignment Robust aluminium frame, 600 mm length Precise alignment that reduces rework and downtime The instrument delivers repeatable, precise readings for typical workshop and installation tasks by combining a digital readout with two traditional vials. The integrated magnetic base secures the level to steel surfaces, reducing slippage during measurement and cutting down the need for rechecks. The device supports measurements across four 90° positions, allowing quick orientation checks without repositioning. This combination of features translates into fewer installation errors and a measurable improvement in workflow efficiency on both production floors and site jobs. Clear digital feedback for fast decision-making A backlit display and a set of dedicated controls (ON/OFF, INC/ABS, HOLD and LIGHT) provide immediate numerical feedback alongside the visual vials, so alignment decisions can be made quickly and confidently even in dim conditions. The display is engineered to orient correctly relative to the user, eliminating confusion when the level is used vertically or horizontally. The instrument runs on 3x AAA cells (not included), offering a familiar and easily replaceable power source that keeps downtime to a minimum. These digital functions accelerate checks and support consistent, documented results across repetitive tasks. Robust design for everyday industrial use The body is built around a 600 mm aluminium frame, which balances stiffness and portability: long enough for stable runs yet light enough for single-person handling at 0.6 kg. The device includes a switchable laser marking line to extend alignment capability over distance and two precision vials for quick visual verification. The combination of a solid frame and practical handling features ensures durability in workshop environments, while the magnetic attachment keeps the tool reliably positioned on ferrous components, improving repeatability across multiple measurements. Choose the Metav IndustryLine digital spirit level for consistent alignment across workshop and site tasks — contact Metav Werkzeuge for tailored advice and reliable supply: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M203.035 GTIN: 4054469182537 Length: 600 mm Weight: 0.6 kg Material: Frame made from aluminium Power supply: 3x AAA (not included) Digital display functions: ON/OFF, INC/ABS, HOLD, Light Facts Measuring range: 4 x 90° Digital: yes Display orientation: always correct Background illumination: yes Special features Magnetic base Two vials Laser marking line Robust aluminium frame Weight: 0.6 kg FAQ How accurate is the level for on-site alignment checks? The digital spirit level M203.035 from Metav IndustryLine provides reliable alignment via its digital readout and vials; typical use delivers repeatable results suitable for installation and workshop tasks. Can the laser be used in bright conditions? The switchable laser marking line on the Metav IndustryLine spirit level is intended for distance alignment; visibility depends on ambient light and recommended use is in moderate light or with a target surface for best results. What power source does the device require and is it included? The instrument operates on 3x AAA batteries, which are not included; this choice simplifies field battery replacement and reduces downtime. Is the level suitable for vertical and horizontal measurements? Yes — the unit provides measurements in four 90° positions and features two vials plus a digital display that orients correctly for both vertical and horizontal use. What makes this Metav IndustryLine level robust for workshop use? A 600 mm aluminium frame, a magnetic base and protected vials ensure mechanical resilience and stable attachment to ferrous workpieces, supporting repeatable measurements in everyday industrial environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60cm Angle Electronic Protractor 0.05° Resolution 0.1° Accuracy, IP54 - BMI
Take advantage of precise angle measurement, a clear illuminated display and user-friendly handling to speed up setup and inspection tasks; order the device directly via Metav Werkzeuge or consult the Metav specialists for advice. Winkeltronic electronic angle meter (Winkelmessgerät) – 0–355°, 60 cm arms (BMI) A Winkeltronic electronic angle meter designed for precise measuring and transferring of angles across a near-full circle, ideal for workshop alignment and layout tasks Large illuminated display for clear readings High resolution of 0.05° for fine adjustments Symmetrical 60 cm arms for stable positioning Hold function and zeroing in any arm position High-precision measurement for reliable alignment The device provides a measuring range of 0–355° with a finely graduated resolution of 0.05° and an accuracy of ±0.1°, which together ensure measurements that meet demanding tolerance requirements. These specifications make the instrument suitable for precise layout, alignment and inspection operations where small angular deviations matter. Because the instrument records and transfers angles directly, setup time is reduced and repeated adjustments incur fewer cumulative errors, supporting more efficient and predictable workflows. Clear display and intuitive controls for faster work A large display with display illumination ensures readings remain legible under workshop lighting or in shadowed positions, reducing reading errors and rechecks. The integrated Hold function allows pausing of displayed values while repositioning the arms, and the ability to zero in any arm position simplifies relative measurements and comparative checks. An automatic shut-off after 3 minutes conserves power during intermittent use, while the option to use 4 x AA batteries or rechargeable 1.2 V cells keeps the device ready for on-site tasks with minimal interruption. Stable mounting and practical features for transfer tasks The instrument’s symmetrical 60 cm arms permit easy and stable placement against workpieces and fixtures, aiding accurate angle transfer between templates, machine beds and components. Built-in horizontal and vertical spirit levels support correct plumb and level during positioning, helping to avoid cumulative alignment faults. Durable construction and workshop-oriented functions translate the device’s technical specifications into everyday benefits: fewer setup iterations, clearer handovers between operators and a lower risk of alignment-related scrap. Contact Metav Werkzeuge for personalised advice on integrating the BMI Winkeltronic into workshop workflows or to request detailed technical clarification from the Metav team Technical data Article number: 4000857621NW Type: Winkeltronic Product type: Angle measuring device Brand: BMI Facts Measuring range: 0–355° Resolution: 0.05° Accuracy: ±0.1° Arm length: 60 cm Power supply: 4 x 1.5 V (AA) or 4 x 1.2 V rechargeable cells Auto-off: after 3 minutes Special features Large illuminated display Hold function Zeroing in any arm position Symmetrical arm arrangement for easy contact Integrated horizontal and vertical spirit levels Designed for measuring and transferring angles FAQ How accurate is the Winkeltronic for precision layout work? The Winkeltronic offers a resolution of 0.05° and an accuracy of ±0.1°, providing the precision required for fine alignment and layout tasks in workshop environments. Can the instrument transfer angles directly to a workpiece? Yes. The device is intended for both measuring and transferring angles, aided by its 60 cm symmetrical arms and integrated spirit levels for stable contact. What power options are available for the angle meter? The instrument accepts 4 x 1.5 V AA batteries or 4 x 1.2 V rechargeable cells, allowing flexible power choices depending on workshop preferences. Is the display readable in low-light conditions? The large display includes display illumination so measurements remain legible in shadowed areas or under poor ambient lighting. How does zeroing work on this angle measuring device? The device allows nulling in any arm position, enabling quick relative measurements and simplified comparative checks without complex reorientation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60cm Angle Measuring Device 0-180° Range Precision Measurement - NEDO GmbH & Co. KG
Take advantage of the combination of full-range 0–180° measurement, a generous 60 cm leg span and repeatable readings for efficient layout and inspection tasks; order the device via Metav Werkzeuge or contact our consultants for application advice. Winkelfix – Angle measuring instrument with 0–180° range and 60 cm legs (NEDO) The Winkelfix is a rugged angle measuring instrument designed for general workshop and on-site layout tasks, offering a full 0–180° measuring range and long legs for stable alignment. Full-range 0–180° measurement 60 cm leg length for extended reach Clear, repeatable graduations for reliable readings Compact, workshop-ready angle gauge Fast, verifiable angle measurement for production use The device provides a continuous 0–180° scale, which eliminates repeated repositioning and speeds up common alignment and marking operations. The long 60 cm legs increase contact area and stability, leading to repeatable readings and reduced rework. The construction and scale layout prioritise simple verification: the measuring range and graduations are immediately legible, enabling quicker decision-making on the shop floor and fewer measurement steps in the production chain. Practical benefits for assembly, layout and inspection By combining a full-angle range with long legs, the gauge reduces the need for multiple specialised jigs. The design supports fast alignment of components, scribing of reference lines and preliminary checks before machining or welding. These practical advantages translate directly into time savings and lower process variability, which are particularly relevant for production teams and maintenance technicians aiming to keep throughput consistent while maintaining tolerances. Trusted supply and application support from Metav Metav stands for the democratisation of precision: procurement teams benefit from straightforward access to reliable measuring tools and a transparent supply chain out of Emmerich. The distribution approach focuses on dependable availability and application advice, backed by a long-standing customer base and practical spare-part handling. For specialised requirements, Metav’s consultants can advise on integration into existing workflows and on complementary metrology equipment. For accurate angle setting and durable shop-floor performance, request the NEDO Winkelfix via Metav Werkzeuge or consult our specialists at info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: 4000857615NW Product type: Angle measuring instrument Brand: NEDO GmbH & Co. KG Model/Execution: maßxi Facts Measuring range: 0–180° Leg length: 60 cm Packaging unit: 1 UID: 4000857615NW Special features Full-range angle measurement 0–180° Long legs for improved stability (60 cm) Clear graduations for repeatability Suitable for workshop layout and inspection tasks FAQ How precise are readings with this instrument? Readings are reliably repeatable thanks to the clear graduations and the long legs; the Winkelfix is intended for layout and inspection where visual scale reading and stable contact are required. Is the device suitable for on-site construction layout? Yes. The full 0–180° range and 60 cm legs make the instrument well suited to on-site alignment and marking tasks in construction and assembly contexts. Can the gauge replace specialised protractors in the workshop? For general layout, marking and preliminary inspection the angle gauge offers a practical, time-saving alternative; specialised high-precision inspection may still require dedicated metrology tools. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60×120cm Angle Measuring Device 0-270° Range, Long Legs - STABILA
Take advantage of the combination of a wide 0–270° measuring range and long 60 x 120 cm arms for efficient inspection of large components; the robust STABILA design supports consistent, repeatable angle checks. Order the WINKELSTAR directly via Metav Werkzeuge or consult our specialists for precise application advice. WINKELSTAR angle measuring device by STABILA — 0–270° range, 60 x 120 cm arms The WINKELSTAR is an angle measuring device for workshop and site use, built to check and set angles up to 270° on large components with long, rigid arms. 0–270° measuring range for wide angle checks 60 x 120 cm rigid arms for large workpieces STABILA build for stability and repeatability Faster inspection of large parts through an extended measuring range The combination of a 0–270° measuring range and long arm length significantly reduces the need to reposition components during inspection. This increases throughput in production and repair workflows by limiting setup time and potential handling errors. The extended range enables checks beyond a simple flat or right-angle measurement, which is particularly useful when working on complex assemblies or irregular geometries. The clear numeric span simplifies planning of sequential checks and supports a rational measurement routine in small and medium-sized workshops. Stable construction for repeatable results and fewer rechecks A rigid arm geometry and purpose-built angle mechanism provide stability and consistent contact with the workpiece, which translates into improved repeatability across successive measurements. Repeatable setups reduce scrap and rework and support quality control documentation. For teams that integrate angle verification into production steps, the sturdy configuration helps maintain alignment under modest handling, ensuring a reliable baseline for further machining or assembly tasks without introducing excessive measurement uncertainty. Designed to integrate into workshop metrology workflows The instrument suits carpentry, metalworking and general maintenance contexts where larger parts require quick, reliable angle verification. Supplied as a single unit, it can be stored with minimal fuss and incorporated into existing inspection routines. Clear labelling and straightforward geometry make it easy for trained staff to include angular checks in final inspection processes, helping to avoid assembly errors and ensuring components meet design intent. For procurement, the device is a practical choice when the emphasis is on efficient angle control and consistent results. Contact Metav Werkzeuge for tailored advice on integration and to secure a STABILA WINKELSTAR directly from our Emmerich facility on the Rhine Technical Data SKU: 4000857625NW Type: WINKELSTAR Product: Winkelmessgerät Brand: STABILA Label: Winkelmessgerät WINKELSTAR Messber.0-270Grad Schenkel-L.60x120cm BMI Facts Measuring range: 0–270° Arm dimensions: 60 x 120 cm Packaging unit: 1 Special features Large-range angle measurement Long, rigid arms for large workpieces Identifier: 4000857625NW Additional reference: 0-270: 4000 857 630 FAQ What angles can be measured with this instrument? The device covers a 0–270° range, enabling checks from flat to obtuse angles without frequent repositioning. What are the arm dimensions of the angle gauge? The gauge features arms of 60 x 120 cm, suitable for larger components and assemblies. Is the instrument intended for workshop use on large components? Yes; the long, rigid arms and wide measuring range make the product suitable for measuring and setting angles on larger workpieces typically found in workshops. How is the product identified for ordering or inventory? The item is listed under SKU 4000857625NW and does carry the label information shown in the product data. How is the device supplied? The product is supplied as a single unit (packaging unit: 1), ready for integration into existing inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75cm Angle Measuring Device 0.05° Resolution 0.1° Accuracy IP65 - BMI
Take advantage of precise angle transfer, a clear illuminated display and a robust 75 cm arm length to speed up layout and assembly tasks; order directly via Metav Werkzeuge or contact their consultants for technical advice. Winkeltronic angle gauge 0–355° — 75 cm arms, 0.1° accuracy A Winkeltronic angle measuring device for accurate measuring and transferring of angles in workshops and industrial layout work. Precise 0.05° resolution and ±0.1° accuracy Large illuminated display for clear readings Symmetrical 75 cm arms for easy placement Integrated horizontal and vertical spirit levels Precision that keeps production on target Highly exact measurement values minimise rework and improve assembly repeatability. The 0.05° resolution paired with a stated ±0.1° accuracy provides a reliable basis for alignment and angular transfer tasks in fabrication and maintenance. Where tight tolerances matter, the fine resolution reduces interpretation errors and shortens inspection cycles, which contributes directly to consistent throughput and fewer adjustments on subsequent operations. Designed for straightforward positioning and readout A clear, large display with display illumination ensures readings remain legible in dim workshops or on-site environments, reducing eye strain and misreads. The device’s symmetrical arms (75 cm) simplify contact with workpieces and enable stable positioning; the built-in horizontal and vertical spirit levels help maintain plumb and level while taking or transferring an angle. These features combine to make angle measurement faster and more dependable during assembly, layout and set-up tasks. Practical operation for everyday workshop use Operational convenience reduces downtime: the digital meter includes a hold functionand auto power-off after three minutes , and allows zeroing in any arm position, which aids repeated measurements and comparative checks. Power is supplied by four AA cells (1.5 V) or rechargeable AA cells (1.2 V), ensuring easy replacement and compatibility with common workshop batteries. The broad 0–355° range covers nearly a full circle, making the instrument versatile for most angular measurement requirements. Contact Metav Werkzeuge to discuss how the Winkeltronic angle gauge can integrate into current workflows and to arrange delivery or technical consultation — Metav Werkzeuge provides expert advice from Emmerich and reliable supply across Europe (info@metav-werkzeuge.com, +49 2822 7131930) Technical data SKU: 4000857639NW Type: Winkeltronic Product: Angle measuring device Measuring range: 0–355° Arm length: 75 cm Packaging unit: 1 UID: 4000857639NW Facts Resolution: 0.05° Accuracy: ±0.1° Power supply: 4 × 1.5 V AA or 4 × 1.2 V rechargeable AA Automatic shut-off: after 3 minutes Measuring range numeric: 0–355° Special features Large illuminated display Hold function Zeroing in any arm position Symmetrical arm arrangement for easy placement Integrated horizontal and vertical spirit levels Suitable for measuring and transferring angles FAQ What measuring range does the instrument cover? The measuring range is 0–355° for the Winkeltronic angle gauge (SKU 4000857639NW), allowing nearly full-circle measurements for most workshop tasks. How precise is the angle reading on this device? The device offers a 0.05° resolution with an accuracy of ±0.1°, giving highly precise readings suitable for layout and alignment work. Can the angle reading be locked for transfer? Yes, the unit includes a hold function so readings can be frozen and transferred without losing the measured value. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Digital Angle Gauge Glass-Fibre Reinforced Red ±0.05° Resolution, Digital Display - SOLA-Messwerkzeuge GmbH & Co KG
Take advantage of precise alignment and robust build in one compact tool: the combination of 0.05° accuracy, a digital display and a glass-fibre reinforced PA housing ensures fast, reliable angle measurement with minimal rework. Order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Digital inclinometer GO! smart — digital display, compact 8 cm, SOLA The Digital inclinometer GO! smart is a compact digital inclinometer designed for quick angle measurements in workshops and installation tasks, combining a clear digital readout with a sturdy, glass‑fibre reinforced polyamide housing. *Compact 8 cm length for confined spaces *Digital display with readable angle values *High accuracy 0.05° for precise alignment *Glass-fibre reinforced PA housing, impact-resistant Faster, measurable alignment thanks to high precision A dependable alignment workflow begins with repeatable measurements: the instrument delivers high accuracy (0.05°) which reduces iterative adjustments and shortens setup time. The digital display supplies clear numeric readouts rather than ambiguous bubble positions, enabling teams to document and compare results quickly. Readings are available in several formats — degrees, percent, and linear fall units such as mm/m and in/ft — which simplifies interpretation across trades and drawings. By converting technical precision into operational speed, the device helps maintain production schedules and cuts the risk of component misalignment in metalwork, carpentry and installation tasks. Small form factor with workshop‑grade durability The compact 8 cm length and low profile make the tool suitable for confined spaces and fixtures where larger instruments cannot sit. The glass‑fibre reinforced PA housing provides structural resilience against knocks and abrasion commonly found on shop floors, while the bright finish improves visibility on cluttered benches. Lightweight yet robust, the construction balances portability with longevity, so the inclinometer can be stowed in tool pouches or mounted temporarily without adding significant bulk. This durable design minimises downtime caused by fragile instruments and supports a long service life under routine workshop conditions. Practical handling and integration into daily workflows Ergonomic layout and a straightforward digital readout mean measurements are taken and recorded with minimal training, supporting a consistent approach across teams. The compact format allows placement on small profiles, machine beds or drift-prone assemblies to verify angle measurement rapidly. For specification checks, alignment jobs or quick verification tasks the unit provides a reliable numeric reference that integrates easily with inspection routines. If additional clarification is required on compatibility or measurement modes, Metav Werkzeuge offers technical guidance from Emmerich — enabling confident selection and immediate operational use of the device. Contact Metav Werkzeuge today for tailored advice on the SOLA GO! smart digital inclinometer and fast availability from Emmerich: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: 4000857000NW Product: Digital inclinometer GO! smart Display: Digital display Brand: SOLA Facts Accuracy: 0.05° Length: 8 cm Packaging unit: 1 Special features Glass-fibre reinforced PA housing Readouts in degrees, percent, mm/m and in/ft Compact design for confined spaces Colour: red FAQ What level of accuracy can be expected from this inclinometer? The Digital inclinometer GO! smart provides an accuracy of 0.05°, making it suitable for precise alignment tasks where small angular deviations must be detected. Which measurement units are available on the display? The device supports readouts in degrees, percent, and linear fall units such as mm/m and in/ft, allowing flexible interpretation for different trades and documentation standards. Is the instrument suitable for use in confined or awkward spaces? Yes, the compact 8 cm length and low profile permit use on narrow profiles and tight fixtures, enabling reliable angle checks where larger tools would not fit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80x60cm Angle Measuring Device 0–270° Range Precision Reading, Durable Construction - STABILA
Take advantage of the combination of a 0–270° measuring range, long 80 x 60 cm arms and STABILA’s proven layout reliability for faster, more accurate alignment tasks; order the angle gauge directly via Metav Werkzeuge or consult Metav’s technical advisers for assistance. STABILA WINKELSTAR Angle gauge — 0–270° range, 80 x 60 cm arms The WINKELSTAR is a robust angle measuring device designed for precise alignment and layout work across workshop, site and fabrication applications. Wide 0–270° measuring range Long arms 80 x 60 cm for large layouts Reliable layout and alignment accuracy Precise angle control for efficient layout work The angle gauge delivers a clear 0–270° scale that supports a wide range of layout tasks, from setting compound angles to transferring measured values across large components. Thanks to its extended 80 x 60 cm arms, the instrument reduces the need for repeated repositioning, which improves repeatability and shortens setup time. The clear scale and stable legs enable consistent readings, translating technical accuracy into fewer adjustments and faster progress on production and assembly tasks. Designed for practical use in demanding environments Built with workshop and site use in mind, the tool combines a straightforward mechanical design with practical handling properties. The long arms provide reach for large-format panels and structural members while maintaining a compact folded footprint for storage. This balance of reach and manageability supports safer handling during layout operations and contributes to reliable alignment results on timber, sheet material and structural steel tasks where dimensional control is essential. Streamlined work processes and professional results Integrating the angle gauge into routine workflows reduces measurement steps and supports predictable outcomes when setting jigs, marking saw lines or checking installed elements. The instrument’s straightforward indication system assists fast decision making and helps maintain production rhythm in both small workshops and larger fabrication environments. For complex requirements or confirmation of compatibility with specific tasks, Metav Werkzeuge’s technical team provides supplementary information and measurement guidance. Contact Metav Werkzeuge for tailored advice on the STABILA WINKELSTAR angle gauge and to arrange procurement or technical consultation at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: 4000857620NW Label: Winkelmessgerät WINKELSTAR Messber.0-270Grad Schenkel-L.80x60cm BMI Manufacturer: STABILA Product type: Winkelmessgerät SKU: 4000857620NW Core specifications Measuring range: 0–270° Arm length: 80 x 60 cm Packaging unit: 1 Addition/reference: 0-270: 4000 857 630 Features & identification Product name: WINKELSTAR Brand: STABILA Typ: WINKELSTAR UID: 4000857620NW FAQ What measuring range does the tool cover? The WINKELSTAR provides a 0–270° measuring range, enabling versatile angle measurement and transfer across most workshop and site tasks. Are the arms suitable for large-format layout work? With arms of 80 x 60 cm, the gauge is intended for larger layouts and marking operations where extended reach and stable support are required. Which product is referenced by SKU 4000857620NW? SKU 4000857620NW identifies the STABILA WINKELSTAR angle gauge (Winkelmessgerät) with the 0–270° range and 80 x 60 cm arms. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80x67x96 mm Magnetic Measuring and Clamping Prism Pair 90° Cut, Switchable Magnet 100 kg, 0.005 mm - Metav IndustryLine
Combine 0.005 mm measurement accuracy with a compact 80 x 67 x 96 mm footprint and 100 kg switchable magnetic clamping force for dependable angular referencing and secure part holding; order the magnetic measuring and clamping prism pair directly via Metav Werkzeuge or consult our advisors for application guidance Magnetic measuring and clamping prism pair M318.240.1 — 100 kg magnetic force, 0.005 mm accuracy (Metav IndustryLine) The Magnetic measuring and clamping prism pair M318.240.1 is a compact angular reference and clamping aid for precision measurement and setup in workshops and inspection benches 100 kg magnetic clamping force 0.005 mm measurement accuracy 90° V-cut and side stop face Compact 80 x 67 x 96 mm form factor Repeatable angular referencing with sub-millimetre precision The set delivers 0.005 mm accuracy for reproducible angular measurements and alignment tasks. Built for measurement tasks where geometry and stability matter, the prisms provide a defined bearing surface for cylindrical and prismatic parts. The rated parallelism 5 µm supports consistent reference planes during inspection and setup, reducing the need for frequent re‑alignment and improving throughput in routine quality checks. Secure clamping and practical handling for workshop use A 100 kg switchable magnetic system secures components on the V-face and on the side stop, allowing both measurement and machining preparations to be carried out without additional fixtures. The V-cut 90° profile and the dedicated side and face contact surfaces offer quick, repeatable seating of shafts and bars. At 3.7 kg overall weight and a compact 80 x 67 x 96 mm envelope, the prisms are easy to position while retaining sufficient mass for stable clamping in everyday shopfloor conditions. Clear benefits for measurement and set-up workflows By combining magnetic retention with defined reference faces, the pair reduces setup time and minimises handling error during intermediate checks. The switchable magnet force enables controlled placement and safe release of parts, which supports efficient measurement cycles on benches and height gauges. Designed as part of angle-measuring and clamping toolkits, the prisms integrate well into inspection routines and jigs where reliable seating and angular repeatability are required. Contact Metav Werkzeuge for tailored application advice and to arrange supply of the Metav IndustryLine M318.240.1 magnetic measuring and clamping prism pair Technical data Article number: M318.240.1 GTIN: 4054469128276 ECLASS: 21160390 Tariff number: 90172039 Dimensions & performance Dimensions (L x W x H): 80 x 67 x 96 mm Weight: 3.7 kg Magnetic force: 100 kg Accuracy: 0.005 mm Parallelism: 5 µm Features & applications 90° V-cut (angular seating) Side stop face for lateral referencing Front face with switchable magnetic force Category: Angle measuring instruments FAQ What applications is this prism pair designed for? The magnetic measuring and clamping prism pair is intended for angular referencing, seating and clamping of shafts and prismatic parts during measurement, inspection and setup operations on benches and in jigs. How strong and flexible is the magnetic clamping? The set offers a 100 kg rated magnetic clamping force with a switchable magnet, allowing secure retention during measurement and controlled release when repositioning parts. What measurement accuracy can be expected? The pair is specified at 0.005 mm accuracy, with a parallelism value of 5 µm, providing repeatable reference planes for routine quality checks. Are the dimensions and weight suitable for portable use? With overall dimensions of 80 x 67 x 96 mm and a weight of 3.7 kg, the prisms balance portability and mass to remain stable during shopfloor handling. Which types of parts can be clamped and measured? The V-groove and side-stop faces accommodate round bars, shafts and small prismatic components, making the pair useful for machining setups, inspection tasks and fixture validation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
99mm/m Digital Spirit Level With Backlight, Magnetic Aluminium Frame, ±90° Reading, Hold Function - Metav IndustryLine
Benefit from the combination of a precise digital display, robust aluminium frame and integrated magnetic base for consistently dependable alignment work; order the M203.024 via Metav Werkzeuge or consult our technical advisers for application-specific guidance. M203.024 digital spirit level — 400 mm, backlit display, magnetic The M203.024 is a 400 mm digital spirit level designed for accurate angle measurement and secure mounting across metal and workshop surfaces. 400 mm aluminium frame for robust handling Digital display with backlight and auto-orienting display Integrated magnetic base for secure attachment Resolution 0.1° for precise angle readings Precise readings that support reliable production The focal point of this instrument is its digital display, which provides a clear numerical readout with a 0.1° resolution. With a measurement span of ±90° / 99 mm/m, the level converts visual alignment into quantifiable data, reducing interpretation errors and saving rework time. The readout supports both incremental and absolute modes (INC/ABS) so measured angles can be compared or transferred directly into machining or assembly tasks — an objectively measurable improvement in workflow reliability. Robust build and practical handling for everyday tasks Housed in an aluminium frame, the level balances stiffness with manageable weight, the device measuring 400 mm and tipping the scales at 0.42 kg. An integrated magnetic base holds securely to ferrous components for hands-free operation, while the backlight and auto-orienting display ensure the values remain legible and correctly oriented regardless of the workpiece position. Operation is straightforward via ON/OFF, INC/ABS, HOLD and light functions, and power is supplied by 2x AAA batteries (not included), making maintenance simple and predictable. Designed for workshop versatility and operational ease The instrument translates technical capability into practical convenience: numerical results are retained with the HOLD function, quick zeroing and incremental switching speed up repetitive checks, and the sturdy frame survives day-to-day handling in industrial environments. The combination of numeric precision and magnetic fixing makes this solution suitable for alignment tasks in metalworking, installation, carpentry and maintenance applications, where stable, verifiable set-ups are required. For projects that demand repeatable alignment, the device reduces subjective judgement and supports consistent decision-making on the shop floor. Confidence through tested supply and industry focus The M203.024 is offered under the Metav IndustryLine umbrella, which acts as a quality filter for the European market. Metav’s supply chain and product range aim to make precision accessible: a broad catalogue, reliable logistics from Emmerich and a track record of long-term customer relationships underpin the practical value of this instrument. Where dependable measurement is part of the production promise, the combination of solid construction, clear digital feedback and secure magnetic mounting adds up to a tool that supports both immediate tasks and longer-term quality assurance. Contact Metav Werkzeuge in Emmerich for tailored application advice and to order the M203.024 digital spirit level Technical data Article number: M203.024 GTIN: 4054469164403 ECLASS: 21160113 ETIM: EC000145 Numbers Length: 400 mm Weight: 0.42 kg Measurement range: ±90° / 99 mm/m Resolution: 0.1° Special features Frame material: aluminium Integrated magnet Digital display with backlight and auto-orienting display Operation: ON/OFF, INC/ABS, HOLD, light Power: 2x AAA (not included) FAQ What level of accuracy can be expected from this digital spirit level? The M203.024 delivers readings with a resolution of 0.1° and a measurement range of ±90° / 99 mm/m, suitable for precise alignment and verification tasks where quantifiable angle data is required. Can the level remain attached to a metal surface during use? Yes, the integrated magnetic base secures the device to ferrous surfaces for hands-free measurement, enabling stable readings during installation and alignment operations. How is the display kept readable in dim environments? The instrument features a backlight and an auto-orienting display so values remain clear and correctly oriented even in poor lighting or awkward positions. Which power source does the unit use and is it supplied? The M203.024 is powered by 2x AAA batteries; these are not supplied with the instrument and should be sourced separately for immediate use. Is the device suitable for general workshop and metalworking applications? Yes, the combination of a sturdy aluminium frame, magnetic attachment and precise digital readout makes it well suited to alignment, assembly and maintenance work in metalworking and related trades. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
DWL 8500XY 2-Achsen Präzisions-Wasserwaage
Precision Digital Level — 2-Axis Ultra Precision Digital Level by Digi-Pas Precision Digital Level with 2-Axis capability delivers ultra-accurate levelling, angle and vibration measurement for CNC machines, large-format printers and precision installations. 2-Axis simultaneous digital readout Built-in Vibrometer for vibration analysis Bluetooth and USB data output for PC/Tablets Colour TFT-LCD for graphic and numeric display Calibrated to NIST, JIS, UKAS and DIN standards Fast, accurate levelling that saves time and reduces rework The device provides an immediate 2-Axis Digital Readout that combines high Resolution and rapid feedback, enabling technicians to complete alignment tasks more quickly and with fewer iterations. When installing or adjusting large CNC Machines, the combined angle and straightness measurement capability reduces on-site downtime by avoiding repeated shimming and trial runs. This leads to measurable productivity gains during commissioning and setup without sacrificing measurement reliability. Remote monitoring and clear data for traceable results With integrated Bluetooth and USB connectivity, measurement data can be logged and reviewed on a PC or mobile device in real time. The supplied or optional PC Synchronisation Software (Experts Edition) enables 3D surface geometry plots and detailed angle graphs, so engineers obtain reproducible records for Quality Assurance and documentation. This digital workflow supports comprehensive analysis and makes validation of alignment procedures straightforward for inspection and audit trails. Vibration analysis integrated for structural stability checks A built-in Vibrometer captures oscillation data while the levelling measurement is in progress, presenting both numeric and graphic outputs on the Colour TFT-LCD. Combining tilt and vibration diagnostics helps identify whether performance issues stem from improper levelling or from mechanical instabilities, allowing corrective action targeted to the root cause. This feature is particularly valuable in settings where vibration directly affects measurement fidelity and production quality. Engineered materials and calibration for sustained precision Constructed from PC-ABS, Cast Iron and Titanium, the instrument balances robustness with thermal stability, supporting consistent readings in demanding shopfloor environments. The unit’s metrological credentials are underpinned by independent calibration and verification consistent with NIST, JIS, UKAS and DIN protocols, ensuring confidence in results for high-precision tasks such as wafer foundry alignments, Vision Measurement Equipment setups and high-speed railway maintenance. For precision installations and commissioning, trust Digi-Pas’ Precision Digital Level — contact METAV Werkzeuge for expert advice and support at info@metav-werkzeuge.com, +49 2822 7131930 or WhatsApp +49 170 2837271 Precision Digital Level Brand: Digi-Pas SKU: DWL8500XY Product Type: with 2-Axis functionality Material: PC-ABS, Cast Iron and Titanium Dimensions: 188 x 62 x 37 mm Data Output: Bluetooth, USB Display: Colour TFT-LCD (Graphic and Numeric) Readout Resolution: 1 arc-second and 5 µm/m linear resolution as stated in product information Indicated Readout Value: 0.005 Accuracy: 0.005 Casing Included: true Availability: In Stock Condition: New Manufacturer or Manufacturer for English: Digipas Technologies Inc.; 200 Spectrum Center Drive, Suite 300; Irvine, CA 92618; United State of America; info@digipas.com FAQ What measurements does the Precision Digital Level by Digi-Pas perform? The Digi-Pas Precision Digital Level with 2-Axis capability measures tilt angles, straightness and vibration simultaneously, providing both numeric values and graphical plots for precise levelling and structural assessment. Can the Digi-Pas Precision Digital Level connect to my laptop or tablet for data logging? Yes, the Precision Digital Level supports USB and Bluetooth connections for real-time data capture; optional PC Synchronisation Software enables advanced analysis and 3D surface geometry visualisation for documentation. Is the Precision Digital Level suitable for wafer foundry and metrology equipment setup? The Digi-Pas Precision Digital Level is designed for high-precision tasks and is suitable for aligning precision fixtures, CMM installation and the setup of measurement instruments used in wafer foundries where absolute levelling and positional stability are critical. What calibration standards does the Precision Digital Level comply with? Digi-Pas’ Precision Digital Level is confirmed by independent calibration services and product testing in accordance with NIST, JIS, UKAS and DIN standards to ensure measurement traceability and reliability. Are you unsure whether this tool meets your requirements or need additional technical details? METAV Werkzeuge offers comprehensive, competent advice — contact info@metav-werkzeuge.com, call +49 2822 7131930 or message WhatsApp +49 170 2837271 and the team will assist with application-specific guidance
Winkelmess-Software zum Einsehen und Speichern der Messwerte auf PC - Digi-Pas
Präzise Winkelmessung, unkomplizierte PC-Anbindung und robuste Bauweise sorgen für zuverlässige Ergebnisse in Werkstatt und Produktion. Bestellen Sie das Digi-Pas DWL3000XY-Soft direkt über Metav oder fragen Sie unsere Beratung an, wenn Sie technische Details klären möchten. Digi-Pas DWL3000XY-Soft Digitale Neigungsmessgerät Das Digi-Pas DWL3000XY-Soft ist ein kompaktes, zweiachsiges Neigungsmessgerät mit PC-Schnittstelle zum Einsehen und Speichern von Messwerten für industrielle Anwendung und Werkstattbetrieb. Zweiachsen-Winkelmessung für präzise Ausrichtung PC-Schnittstelle zum Speichern von Messwerten Inklusive Datenerfassungs-Software für Auswertung Robustes Gehäuse für regelmäßigen Werkstatt-Einsatz Einfache Kalibrierung und schnelle Messzyklen Präzise Winkelkontrolle für Fertigung und Montage Mit der Zweiachsen-Winkelmessung liefert dieses Messgerät exakte Winkelangaben, die zur Ausrichtung von Bauteilen und Maschinen erforderlich sind. Die klare Anzeige reduziert Messfehler und erhöht die Prozesssicherheit, weil Abweichungen sofort erkennbar sind. Für Anwender bedeutet das weniger Nacharbeit und bessere Reproduzierbarkeit von Einstellvorgängen. Direkte Verbindung zum PC für lückenlose Datenerfassung Dank der PC-Schnittstelle lassen sich Messwerte direkt auf den Rechner übertragen und langfristig speichern. Die mitgelieferte Software ermöglicht das Erfassen, Interpretieren und Exportieren von Messreihen in gängige Formate. Für Anwender ohne tiefe IT-Kenntnisse wird kurz erklärt: Exportieren heißt, die gespeicherten Messwerte als Datei ablegen und in Tabellenprogrammen weiterverarbeiten zu können. Robustheit und Alltagstauglichkeit für Handwerk und Industrie Das Gerät wurde für den Werkstattalltag konzipiert und kombiniert kompakte Bauform mit widerstandsfähiger Ausführung. Dadurch eignet sich das Messgerät sowohl für den mobilen Einsatz auf Baustellen als auch für stationäre Prüfplätze. Nutzer profitieren von geringer Ausfallzeit und stabilen Messbedingungen selbst unter anspruchsvollen Arbeitsbedingungen. Einfache Handhabung und schnelle Ergebnisse Die Bedienung ist auf Effizienz ausgelegt: Kalibrierung und Messstart erfordern nur wenige Schritte, sodass Messzyklen kurz bleiben. Diese Bedienfreundlichkeit spart Zeit bei wiederkehrenden Prüfungen und macht das Gerät auch für Anwender geeignet, die regelmäßig zwischen Messaufgaben wechseln. Fachbegriffe wie Kalibrierung werden dabei praktisch umgesetzt: einmal einstellen, Kontrolle durchführen, Messwert übernehmen. Profitieren Sie von der Präzision des Digi-Pas DWL3000XY-Soft und fordern Sie die technische Beratung bei Metav an – per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Artikelnummer: DWL3000XY-Soft Marke: Digi-Pas Bezeichnung: zum einsehen und speichern der Messwerte auf PC Fakten Besonderheiten Anwendungsbereich: Winkel PC-Datenspeicherung Datenerfassungs-Software FAQ Wie genau misst das Gerät Winkel? Das Gerät liefert zweiachsige Winkelwerte, die sich für Ausrichtungsaufgaben in Fertigung und Montage eignen. Beim Digi-Pas DWL3000XY-Soft wird die Winkelinformation digital ausgegeben, sodass präzise Korrekturen möglich sind. Kann ich die Messwerte auf dem Rechner speichern und weiterverarbeiten? Ja. Die PC-Schnittstelle des Digi-Pas DWL3000XY-Soft ermöglicht das Einsehen und Speichern von Messwerten; die mitgelieferte Software unterstützt Export in gängige Formate zur Weiterverarbeitung. Eignet sich das Messgerät für den mobilen Einsatz? Das kompakte Design und das robuste Gehäuse machen das Digi-Pas DWL3000XY-Soft tauglich für den mobilen Einsatz in Werkstatt und Baustelle, ohne dass die Messgenauigkeit darunter leidet. Ist die Inbetriebnahme kompliziert? Die Kalibrierung und Bedienung sind auf Anwenderfreundlichkeit ausgelegt. Die einfache Bedienstruktur reduziert Einlernzeit und sorgt für schnelle Messzyklen mit dem Digi-Pas DWL3000XY-Soft. Für welche Anwender wurde das Gerät konzipiert? Das Messgerät richtet sich an Fachkräfte in Industrie, Handwerk und Werkstatt, die zuverlässige Winkelmessung und nachvollziehbare Datenspeicherung benötigen.
Ensure precise alignment across your workflow
Angle measuring instruments, also offered as angle gauges, inclinometers or digital angle finders, provide the foundational accuracy required in modern manufacturing, machine building and professional workshops. These instruments permit reliable angle determination, transferring angular measurements directly to workpieces and verifying geometric conformity during production and inspection.
How these instruments work and where they are essential
Mechanical angle gauges typically consist of a semicircular protractor and a movable arm with a precise vernier, plus a locking screw to fix the measured value for transfer or repeated checks. Digital angle measuring instruments combine robust mechanical legs with electronic sensors and an LCD display, delivering immediate readings that reduce interpretation errors and accelerate routine checks. Digital inclinometers determine angles relative to gravity and can show relative and absolute inclinations simultaneously, making them ideal for aligning machine beds, pipework or axes where gravity-referenced angles matter.
Measurable benefits that improve production efficiency
- Faster setup and fewer rejects thanks to the zero function, which allows the display to be zeroed at any position for quick relative measurements.
- Safer readings in confined or overhead positions using the hold function and rev function for 180° display rotation.
- Reduced downtime and wear by using instruments with chromed special steel housings or anodised aluminium bodies that resist corrosion and maintain profile stiffness.
- Hands-free alignment on ferrous surfaces through a robust magnetic base, enabling single-operator adjustment on steel constructions.
- Dependable analogue options with a high-precision vernier for environments where electronic devices are unsuitable.
Metav: precision made accessible for every workshop
Metav positions itself as a dependable partner for industrial buyers who require both variety and quality. Based in Emmerich, Metav acts as a quality filter for the European market, offering an extensive range of analogue and digital angle measuring instruments alongside comprehensive workshop equipment. With over 48,000 customers and a catalogue exceeding 250,000 products, Metav supplies reliable stock and clear order handling so teams can focus on production rather than logistics. If you require rapid selection advice or product matching, Metav’s curated assortment simplifies procurement decisions for maintenance, toolrooms and quality departments.
Compact summary
Angle measuring instruments, whether analogue or digital, secure repeatable alignment, speed up inspection processes and reduce rework by combining proven mechanical design with modern sensor functions such as zero, hold and rev.
FAQ
What is the advantage of a digital inclinometer over a mechanical angle gauge?
A digital inclinometer delivers immediate numeric readings on an LCD display and often includes functions such as zero, hold and rev, making the device faster and less error-prone for serial inspections than a purely mechanical angle gauge.
When should I choose an instrument with a magnetic base?
Choose an instrument with a magnetic base for alignment tasks on ferrous constructions, such as machine beds or steel frames, where hands-free positioning and stable attachment significantly improve accuracy and safety.
Are anodised aluminium instruments suitable for mobile service work?
Yes. Instruments with anodised aluminium bodies offer low weight with high profile stiffness, making them especially suitable for large-format tools and mobile service engineers who need portability without compromising precision.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com