Accurate depth measurement for precision metalworking
Depth measurement tools such as depth gauges and depth callipers are designed to determine the exact depth of blind holes, internal grooves and similar features, providing machinists with reliable results for quality control and fitting tasks. Made from stainless steel or rust‑resistant steel, these gauges ensure durability and long‑term stability while maintaining measurement accuracy across repeated use. Available in analogue and digital variants, users can choose robust vernier instruments or digital models with a 0.01 mm resolution and features like unit switching, preset functions and IP67 protection for harsh environments. With interchangeable probes, hook or double‑hook tips and varying stem lengths and measuring ranges, depth gauges adapt to applications from shallow grooves to deep bores, improving process repeatability and assembly precision.
200mm Digital Depth Gauge Asymmetric 120mm Bridge, Digital Display mm/inch, DIN 862 - Metav IndustryLine
Take advantage of precise depth measurement, a robust stainless steel, hardened construction and an asymmetric 120 mm bridge that reaches stepped features with ease; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Digital depth gauge M218.072 — 0–200 mm range, asymmetric 120 mm bridge, Metav IndustryLine The Digital depth gauge M218.072 is a standard-range digital depth gauge with an asymmetric 120 mm bridge, designed for reliable depth checks in workshop and metalworking environments. 0–200 mm measuring range Asymmetric 120 mm bridge for stepped depths Digital mm/inch readout with ON/OFF and Zero Stainless steel, hardened construction Consistent measurement accuracy for routine quality control The instrument offers a resolution of 0.01 mm (0.0005 in) on a clear digital display, providing quick, unambiguous results for production and inspection tasks. Constructed to the requirements of DIN 862, this depth gauge fits the Standard category (measuring range up to 300 mm), which is the workshop baseline for a balance of reach and rigidity. For comparative orientation, digital devices in this class typically exhibit an error limit of about ±0.03 mm up to 300 mm; the combination of fine resolution and standard conformity supports dependable dimensional control in series production and maintenance work. Robust design that eases everyday handling The asymmetric bridge (120 mm, configured 90 + 12) allows access to recessed or stepped features without sacrificing stability; such geometry is useful when measuring depths behind shoulders or inside housings. The body is made from stainless steel, hardened and protected by a metal housing, which reduces wear and preserves measuring accuracy in busy workshops. At approximately 0.57 kg, the gauge is substantial enough for stable measurements while remaining manageable for single‑operator use. Delivery includes a protective case for transport and safe storage, preserving the instrument between jobs. Efficient digital features to speed up workflows A concise digital readout with ON/OFF, Zero and mm/inch functions simplifies switching between metric and imperial workflows and removes reading ambiguities associated with analogue scales. Rapid zeroing and unit conversion reduce cycle time per measurement and cut administrative friction when recording results. Built for machine shops, toolrooms and inspection benches, the unit supports faster decision‑making in setup and check routines and pairs well with standard quality documentation practices. Choose the Metav IndustryLine depth gauge for repeatable depth measurements and contact Metav Werkzeuge for tailored procurement or technical clarification at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M218.072 GTIN: 4054469111537 Brand: Metav IndustryLine ECLASS: 21170349 Facts Measuring range: 0–200 mm Bridge length: 120 mm (90 + 12) Resolution: 0.01 mm / 0.0005 in Weight: 0.57 kg Norm: DIN 862 Tariff number: 90173000 Special features Digital display with ON/OFF, Zero and mm/inch conversion Asymmetric 120 mm bridge for stepped-depth access Material: stainless steel, hardened; metal housing Delivered in a protective case for transport Classification: Standard range depth gauge FAQ How precise is the depth measurement with this gauge? The Digital depth gauge M218.072 provides a resolution of 0.01 mm (0.0005 in) and conforms to DIN 862; typical error limits for devices in this class are around ±0.03 mm up to 300 mm. Can this depth gauge measure stepped features and recesses? Yes, the asymmetric 120 mm bridge (90 + 12) is specifically designed to reach into stepped depths and recessed areas while maintaining stability. Is the instrument suitable for everyday workshop use? Its stainless steel, hardened construction and metal housing make this depth gauge durable for regular workshop and metalworking applications. Does the display allow switching between metric and imperial units? The digital readout includes mm/inch conversion plus ON/OFF and Zero functions, enabling quick unit changes and straightforward zeroing on reference surfaces. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Depth Gauge Inductive IP67, MODE/INC/HOLD Display, CR2032 Battery - Metav IndustryLine
Take advantage of the combination of robust IP67 protection, an inductive measuring system and workshop‑grade hardened stainless steel for dependable depth measurement across routine production tasks; order the depth gauge directly via Metav Werkzeuge or ask our consultants if needed. Digital depth gauge M218.121.D — 200 mm range, IP67 protection (Metav IndustryLine) A Digital depth gauge M218.121.D for precise depth measurement in machine shops and maintenance work, featuring an inductive sensor and full dust‑ and splash‑proof protection. 200 mm measurement range, workshop standard IP67 waterproof and dustproof protection Inductive measuring system for reliable readings DIN 862 compliance, hardened stainless steel Durable protection that keeps measurements reliable The instrument is built for the workshop environment: IP67 sealing prevents dust ingress and protects against temporary immersion, while the hardened stainless steel body resists corrosion and everyday wear. This combination reduces downtime and maintenance needs, delivering a stable measuring platform that retains calibration through regular use. The build also keeps weight manageable at 0.4 kg, supporting handheld operation without excessive fatigue and ensuring the tool is practical for repeated checks on the production line. Precise, repeatable depth readings with inductive sensing Equipped with an inductive measuring system and a display resolution of 0.01 mm, this depth gauge provides clear, repeatable values suitable for standard quality control tasks. The unit meets DIN 862 conventions for caliper‑type instruments and covers a 0–200 mm range, classified as a Standard workshop size that balances reach and stiffness for typical machine‑shop components. Readout functions (MODE, INC, HOLD and 0/ON) support simple workflows, while the absence of a data output means readings are taken directly from the display for immediate decisions on the shop floor. Practical operation and service features for everyday use Operation is designed for clarity: the large digital readout and tactile buttons enable fast zeroing, incremental measurements and value hold for transfer to inspection records. Power is supplied by a 3 V CR2032 battery, a common and easy‑to‑replace cell that keeps service straightforward. The compact form factor and robust construction make the gauge well suited to bench work and on‑machine checks, offering a reliable tool for machinists, maintenance staff and inspection personnel who require a durable, manual depth measuring instrument. Consider the Metav IndustryLine depth gauge for robust, IP67‑rated depth measurement and contact Metav Werkzeuge for ordering details or technical advice. Technical data Article number: M218.121.D GTIN: 4054469182940 Brand: Metav IndustryLine Facts Measurement range: 0–200 mm Resolution: 0.01 mm Weight: 0.4 kg Battery: 3 V CR 2032 Bridge: 100 mm Special features Material: hardened stainless steel Protection class: IP67 Measuring system: inductive Display functions: MODE, INC, HOLD, 0/ON Standard: DIN 862 No data output (manual readout) FAQ What measurement range does the depth gauge cover? The instrument provides a measurement range of 0–200 mm, placing it in the Standard caliper class (100–300 mm), which suits general machine‑shop and metalworking tasks. How accurate are the readings and what resolution is shown? The digital readout offers a resolution of 0.01 mm; the device follows DIN 862 conventions for caliper instruments and is intended for standard workshop quality control. Is the gauge suitable for use at the machine or on the shop floor? Yes. IP67 protection and a hardened stainless‑steel body make the tool resistant to dust and splash exposure, making it appropriate for workshop environments and on‑machine checks. Does the depth gauge provide a data interface for SPC systems? This model is supplied without data output; readings are taken directly from the display and recorded manually. What powers the display and how easy is maintenance? The unit uses a 3 V CR2032 battery, a widely available cell that is simple to replace, reducing maintenance complexity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Depth Gauge Stainless Body 3V Display, DIN 862, Supplied In Case - Metav IndustryLine
Take advantage of the combination of 0.01 mm digital resolution, robust hardened stainless-steel construction and a practical RB 5 data output for seamless measurement logging. Order the digital depth gauge directly via Metav Werkzeuge or ask our consultants if needed. Digital depth gauge M218.025.N — 0–200 mm digital depth gauge, stainless-steel, Metav IndustryLine The Digital depth gauge M218.025.N is a workshop-ready measuring instrument for reliable depth measurement in production, inspection and assembly contexts Digital readout 0.01 mm resolution Measuring range 0–200 mm Hardened stainless-steel construction Data output RB 5 for transfer Precision for everyday workshop control The instrument is designed to meet the practical needs of machine shops and quality departments: with a measuring range of 0–200 mm it falls into the Standard class of calipers, offering an effective balance between reach and stiffness for most routine tasks. The digital readout provides 0.01 mm increments, making measurements easy to read and reducing interpretation errors compared with analogue scales. Compliance with DIN 862 guarantees that the gauge follows recognised geometric and performance criteria, which aids repeatability in production environments and simplifies QC documentation. Robust construction and data-ready operation Constructed from hardened stainless steel and housed in a metal case, the depth gauge resists shop-floor wear while maintaining measuring fidelity. The 100 mm probe length ensures access to medium-depth recesses and slots without compromising stability. Electronic functions include ON/OFF, ZERO, UNIT and HOLD for straightforward operation; the RB 5 data output enables numeric transfer to data collection systems or handheld loggers, reducing transcription errors and speeding up inspection cycles. The tool is powered by a 3 V cell and weighs approximately 0.55 kg, offering a solid but manageable feel during repetitive measuring tasks. Practical benefits for quality assurance and production The gauge delivers reproducible depth readings for mould making, fixture verification and general component inspection. The compact design helps maintain measuring ergonomics during long inspection runs, and the clear display with holding function simplifies readings from awkward angles. For workshops seeking dependable metrology without complex integration, this device provides a straightforward way to digitise selected measurements and to standardise processes across teams. Metav’s approach to democratising precision further ensures that customers receive consistent product quality and supply chain support from a European base. Contact Metav Werkzeuge for tailored advice on the Metav IndustryLine digital depth gauge M218.025.N — call +49 2822 7131930 or email info@metav-werkzeuge.com for product matching and order assistance Technical data Article number: M218.025.N GTIN: 4054469160085 Label: Digital depth gauge 200 x 100 mm, metal housing, 3 V INOX, DIN 862 Facts Measuring range: 0–200 mm Resolution: 0.01 mm / 0.0005 in Weight: 0.55 kg Probe length: 100 mm Special features Material: hardened stainless steel, metal housing Standard: DIN 862 Display functions: ON/OFF, ZERO, UNIT, HOLD Data output: RB 5 Power supply: 3 V FAQ What measurement accuracy can be expected from this depth gauge? The gauge offers a display resolution of 0.01 mm, providing the standard digital accuracy required for workshop inspection and routine quality control procedures. Is the device compliant with recognised standards? Yes, the instrument is specified to DIN 862, which defines the geometric and performance requirements for calipers and comparable measuring tools. Can measurement values be exported to a data logger or PC? Readings can be transferred via the RB 5 data output, enabling integration with external data collectors or logging systems for reduced manual entry. What power source does the gauge use and how is it maintained? The depth gauge is powered by a 3 V battery cell; replacement is straightforward and ensures continued reliable electronic operation. For which workshop tasks is this gauge particularly suited? With its 0–200 mm range and 100 mm probe, the instrument is ideal for depth checks in mould making, fixture inspection and day-to-day production metrology. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Depth Gauge With Auto Power Off, IP67, Stainless Hardened Steel - Metav IndustryLine
Take advantage of the combination of high corrosion resistance, reliable IP67 protection and fine 0.01 mm resolution for consistent depth measurement in routine quality checks; order the gauge via Metav Werkzeuge for dependable delivery and advice. Digital depth gauge M218.142.N — 200 x 100 mm, IP67, Metav IndustryLine The Digital depth gauge M218.142.N is a robust, workshop-ready instrument for depth measurement in machining and inspection according to DIN 862. IP67 protection for harsh environments 0–200 mm depth range for standard tasks 0.01 mm resolution, inch display 0.0005 Hardened stainless steel construction Industrial accuracy that fits the workshop The gauge combines a clear digital display with an industry-proven measuring range of 0–200 mm, making it the standard solution for general machine‑shop depth checks. Compliance with DIN 862 ensures traceable geometry and reliable measuring behaviour on the shop floor, while the 0.01 mm resolution provides the distinction needed for routine quality control without overcomplicating readout and documentation. The hardened stainless steel construction resists wear at the contact surfaces and preserves calibration stability during repetitive use. Built to withstand coolant and chips Protected to IP67, this depth instrument tolerates exposure to liquids and swarf that occur in industrial environments, so measurements remain dependable even at the machine. The combination of sealed electronics and a solid frame reduces the risk of downtime and service calls; in practice this translates to fewer interruptions in production and more reproducible results. A compact form and modest mass (approx. 0.4 kg) keep handling easy for single‑handed operation and frequent repositioning during fixture or mould checks. Practical functions that save time and reduce errors Practical features include a digital display with MODE and SET keys for quick switching between metric and imperial units and convenient zeroing. The instrument’s automatic switch‑off preserves battery life between uses, while the inch resolution of 0.0005 in supports legacy drawings and cross‑checks. These functions reduce manual conversions and transcription errors, so inspection cycles become more efficient. The design focuses on core benefits: straightforward operation, robust sealing and material choice that together support consistent results across daily measurement tasks. Contact Metav Werkzeuge for personalised technical advice or to request stock information for the Metav IndustryLine Digital depth gauge M218.142.N — reliable measurement from Emmerich to your workshop. Technical data Article number: M218.142.N GTIN: 4054469178974 Manufacturer: Metav IndustryLine Weight: 0.4 kg Facts Measuring range: 0–200 mm Resolution (metric): 0.01 mm Resolution (inch): 0.0005 in Protection class: IP 67 Standard: DIN 862 Special features Hardened stainless steel construction Digital display with MODE and SET keys Automatic switch‑off to save battery Digital instrument suitable for routine quality control FAQ What measuring range does the depth gauge cover? The instrument covers a 0–200 mm measuring range, suitable for standard workshop and metalworking depth checks. Is the gauge water and dust resistant for machine‑shop use? Yes, the product is rated IP67, protecting electronics and mechanics from dust ingress and temporary immersion, which makes it appropriate for wet or swarf‑prone environments. Can the display show inches as well as millimetres? The digital readout supports both units; inch resolution is 0.0005 in and switching is handled via the MODE key on the display. Does the gauge comply with a recognised standard? The tool is manufactured in accordance with DIN 862, ensuring conformity with established caliper and depth gauge geometry and measuring practice. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Depth Gauge With Double Hook, Metal Body, 0.01mm Resolution, Supplied In Case - Metav IndustryLine
Take advantage of precise depth measurement and workshop-grade durability: the gauge combines a digital display with 0.01 mm resolution, a 0–200 mm measurement range, and a hardened stainless steel construction for repeated everyday use. Order directly via Metav Werkzeuge or consult our specialists for application advice. Metav IndustryLine Digital Depth Gauge M218.095.N — Digital depth gauge with 0–200 mm range and double‑hook probe Metav IndustryLine Digital Depth Gauge M218.095.N is a compact, workshop-ready depth gauge for routine and quality‑control tasks, designed as a durable measuring tool for metalworking and maintenance environments. Digital display, 0.01 mm resolution Measurement range 0–200 mm Hardened stainless steel construction Double‑hook probe for secure measurement Precise, measurable results for daily workshop checks The digital depth gauge offers a clear digital display with a standard resolution of 0.01 mm (also 0.0005 in), enabling repeatable readings that meet common inspection routines. The 0–200 mm span classifies this instrument as a standard workshop caliper length, balancing reach with rigidity for stable one‑hand operation. The gates and probe geometry minimise flex during measurement, which improves reproducibility compared with longer, less stiff devices. Readout functions include zero, unit and hold, simplifying incremental measurements and unit conversions while reducing transcription errors. Robust build for industrial handling and long service life Constructed from stainless steel, hardened, with a metal housing, the depth gauge resists corrosion and stands up to the mechanical stresses of a production environment. The double‑hook probe provides a secure seating in narrow recesses and against step edges, reducing slippage during depth probing. With a compact mass of 0.55 kg, the instrument is firm in the hand and stable on flat surfaces without being cumbersome. The overall design supports frequent use in machine shops, maintenance bays and inspection benches where durability and consistent results are required. Practical interface and data connectivity for traceable work The instrument runs from a 3 V power supply and the readout offers intuitive controls: ON/OFF, ZERO, UNIT and HOLD. A defined data output labelled RB 5 is available for integration into data collection workflows where digital capture is needed. The unit follows factory calibration standards (Werksnorm) for immediate use in routine checks; traceable calibration certificates can be supplied where specified. Clear labelling, a sturdy probe and an easy‑to‑operate display combine to speed up measurement tasks while reducing operator error through straightforward, measurable functions. For reliable depth measurement in standard workshop applications, choose the Metav IndustryLine M218.095.N and contact Metav Werkzeuge for tailored technical advice and fast supply from Emmerich. Technical Data Article number: M218.095.N GTIN: 4054469160245 eClass: 21170349 Tariff number: 90173000 Core data Measurement range: 0–200 mm Resolution: 0.01 mm (0.0005 in) Weight: 0.55 kg Power: 3 V Special features Material: stainless steel, hardened; metal housing Display: digital with ON/OFF, ZERO, UNIT, HOLD Probe: double‑hook depth probe Data output: RB 5 Calibration: works standard (Werksnorm) FAQ How accurate is the depth reading on this gauge? The Metav IndustryLine depth gauge provides a display resolution of 0.01 mm with a consistent readout suitable for standard workshop inspection tasks. Is the gauge suitable for everyday machine‑shop use? Yes — the 0–200 mm range positions the instrument as a standard workshop depth gauge, combining reach and stiffness for routine machining and maintenance measurements. What materials is the instrument made from? The device is manufactured from hardened stainless steel with a metal housing for improved durability in industrial environments. Does the gauge offer data output for documentation? A data output marked RB 5 is provided, enabling integration into digital data logging or quality‑control systems. Is the gauge supplied calibrated? The unit is delivered to factory calibration standard (Werksnorm); calibration certificates can be provided where required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Depth Gauge With Pointed Probe, 0.01mm Resolution, Stainless Hardened, DIN 862, In Case - Metav IndustryLine
Combine reliable 0–200 mm measuring range with a hardened stainless steel construction and a precise 0.01 mm digital readout to ensure consistent depth control in production and workshop environments. Order the instrument directly via Metav Werkzeuge or contact their consultants for application advice and availability. Metav IndustryLine digital depth gauge M218.087.N (200 mm) — hardened stainless, digital display Metav IndustryLine digital depth gauge M218.087.N is a compact, workshop-ready instrument for precise depth measurements in compliance with DIN 862 Digital display with 0.01 mm resolution Hardened stainless steel construction Measuring range 0–200 mm for standard tasks ON/OFF, zero, unit and hold functions Precise depth control for everyday workshop and production tasks The instrument is designed for the Standard measuring class (maximum range up to 300 mm), which provides an optimal balance of reach and rigidity for general metalworking and machine construction. With a measuring range of 0–200 mm and a display resolution of 0.01 mm, the gauge supports repeatable depth checks on housings, slots and machining fixtures. The construction conforms to DIN 862, making it a dependable choice for routine quality checks and process control where stable, verifiable readings are required. Robust materials and a practical measuring bridge for long service life Built from hardened stainless steel, the depth gauge resists workshop wear and maintains geometric integrity over time, reducing measurement drift and downtime for maintenance. The 150 mm measuring bridge gives a stable reference and improved handling when measuring deeper recesses, while the pointed tip supports narrow or restricted access points. With a weight of 0.86 kg, the instrument feels solid in hand without being unwieldy, which contributes to consistent contact pressure and reproducible results. Digital functions that speed up inspection workflows The digital readout features ON/OFF, ZERO, UNIT and HOLD controls for flexible operation and quick unit changes between millimetres and inches (displayed inch resolution 0.0005"). A dedicated data output listed as RB 5 enables straightforward integration into measurement collection routines where digital transfer is required. Power is supplied via a 3 V cell for reliable operation on the shop floor. Together, these features reduce entry errors, shorten measurement cycles and support a clear audit trail for quality documentation. Contact Metav Werkzeuge for tailored specification advice and to secure the Metav IndustryLine digital depth gauge for workshop and production use Technical Data Article number: M218.087.N GTIN: 4054469159836 Tariff number: 90173000 Norm: DIN 862 Facts Measuring range: 0–200 mm Display resolution: 0.01 mm Inch resolution: 0.0005" Measuring bridge: 150 mm Weight: 0.86 kg Power supply: 3 V Data output: RB 5 Special features Material: stainless steel, hardened Tip: pointed measuring tip for confined spaces Digital display with ON/OFF, ZERO, UNIT and HOLD functions Conformity: suitable for standard workshop and production tasks FAQ Is this depth gauge suitable for general machining and workshop use? The Metav IndustryLine digital depth gauge M218.087.N is designed for standard workshop and production tasks; its 0–200 mm range and hardened stainless construction make it suitable for routine depth measurements on housings, slots and fixtures. What resolution and accuracy can be expected from the display? The instrument offers a display resolution of 0.01 mm (0.0005" in inches). As a digital standard device, typical error limits are in line with industry practice (for example ±0.03 mm for ranges up to 300 mm), enabling reliable shop-floor control. Does the product include a calibration certificate? No ISO 17025 calibration certificate is specified in the product data. If calibration to a specific standard or an accredited certificate is required, please enquire with Metav Werkzeuge for available options. How is data output handled for documentation or SPC systems? Data output is provided as RB 5, which allows connection to compatible data collection setups; the digital readout and hold function also support manual recording and measurement traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Depth Gauge With Pointed Probe, Metal Body, 0.01mm Resolution, DIN 862, Supplied In Case - Metav IndustryLine
Take advantage of a 0–200 mm measuring range with 0.01 mm readout and a hardened stainless-steel construction for reproducible depth checks; the robust metal housing and DIN 862 conformity support workshop reliability. Order directly via Metav Werkzeuge or contact the consultants for specification matching. M218.035.N digital depth gauge — 0–200 mm, stainless steel, DIN 862 (Metav IndustryLine) The M218.035.N digital depth gauge is a compact, workshop-grade instrument for precise depth and slot measurement in machining, toolmaking and quality control environments. 0–200 mm measuring range 0.01 mm resolution digital display Hardened stainless-steel construction Complies with DIN 862 Precision that speeds up inspection routines The instrument combines a clear digital display with a standard 0.01 mm resolution, enabling quick, repeatable readings that reduce inspection time and ambiguity. The electronic readout is operated via ON/OFF, ZERO, UNIT and HOLD keys, which simplifies comparative checks and temporary value retention during repetitive tasks. Classified within the standard measuring-range category (max 100–300 mm), this device offers the best compromise between reach and rigidity for general machining and metalwork, making it suitable for bench inspection and production-line sampling. Durable design for daily workshop use A hardened stainless-steel frame and a protective metal housing deliver longevity and resistance to workshop wear. Compliance with DIN 862 indicates that mechanical dimensions and tolerances match well-established metrology norms, so measurements remain traceable and comparable across inspections. The pointed measuring tip supports targeted depth probing in grooves and recesses while the compact construction aids handling and storage. Built for regular use, the gauge balances robustness with manageable mass for single-person operation. Functional features that support quality workflows The device is powered by a 3 V supply and provides a formatted data output via RB 5, facilitating integration into documentation routines or simple data collection setups where compatible. With a bridge dimension of 100 mm and a total weight of 0.55 kg, the instrument is stable during measurement yet straightforward to manoeuvre. The metal housing protects the electronics while the layout of the keypad supports fast zeroing and unit changes, improving efficiency in series inspections and first-article checks. For procurement advice, technical matching or to order the stainless-steel digital depth gauge from Metav IndustryLine, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for dedicated consultancy and supply options. Technical Data Article number: M218.035.N GTIN: 4054469160122 Norm: DIN 862 Data output: RB 5 Numbers / Core technical data Measuring range: 0–200 mm Resolution: 0.01 mm Bridge: 100 mm Weight: 0.55 kg Tariff number: 90173000 ECLASS: 21170349 Special features / Designs Material: hardened stainless steel Metal housing Digital display with ON/OFF, ZERO, UNIT, HOLD Power: 3 V Pointed measuring tip Digital instrument, compliant with workshop inspection use FAQ What is the measuring range and resolution of this instrument? The M218.035.N digital depth gauge offers a measuring range of 0–200 mm with a 0.01 mm digital resolution suitable for standard workshop inspections. Is the instrument compliant with any standards? Yes. The depth gauge conforms to DIN 862, ensuring mechanical dimensions and general performance align with recognised metrology practice. Can measurement values be exported for documentation? The gauge provides a data output labelled RB 5, which can be used where compatible collection or logging systems are available. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Depth Gauge With Tip, 0.01mm Resolution, Stainless Hardened, DIN 862, Supplied In Case - Metav IndustryLine
A compact, workshop-ready digital depth gauge that pairs stainless hardened construction with a 0–200 mm measuring range and a 0.01 mm digital resolution for dependable inspection results; order this gauge directly via Metav Werkzeuge or consult our specialists if additional advice is needed. Digital depth gauge M218.085.N — 0–200 mm, stainless hardened (Metav IndustryLine) Digital depth gauge M218.085.N is a robust, DIN 862–compliant instrument for precise depth measurement in everyday workshop and quality‑control tasks with a 0–200 mm measuring range. 0–200 mm measuring range for standard workshop tasks Digital display 0.01 mm resolution, inch/mm selectable Stainless hardened construction to DIN 862 Includes probe tip and protective case for transport Precision that supports reliable quality control The digital depth gauge delivers measurable, repeatable results thanks to its 0–200 mm range and 0.01 mm resolution, making it suitable for standard machine‑shop inspection and production checks. Compliance with DIN 862 ensures the instrument meets recognised tolerances and handling principles; this reduces interpretive variance when comparing results across shifts or locations. The compact, instrument‑style design keeps the measuring faces stable during use, which supports consistent readings and reduces rework. Built to withstand routine workshop conditions Constructed from hardened stainless steel, the gauge resists corrosion and everyday wear, extending service life and maintaining measuring face integrity. The robust build reduces maintenance intervals and preserves measurement accuracy over time, which contributes to predictable inspection cycles and lower total cost of ownership in a busy shop environment. The included protective case further shields the instrument during transport and storage, preventing accidental damage between jobs. Practical digital features for efficient data capture The clear digital display is equipped with ON/OFF, ZERO, UNIT and HOLD functions to simplify operations and avoid transcription errors. The instrument is battery‑powered at 3 V, providing straightforward field use without fixed power connections. A data output (RB 5) is provided to facilitate electronic recording and integration into traceable inspection routines; this streamlines documentation and supports faster quality decisions on the shop floor. Workshop classification and user benefits Classified as a standard measuring tool (0–300 mm category), the gauge balances reach and stiffness for the most common workshop tasks, especially measuring steps, recesses and bore depths on medium‑sized components. The combination of compact handling, repeatable digital readout and durable materials reduces setup time for routine checks and improves throughput. The instrument’s features focus on practical benefit: faster inspections, clearer records and durable performance in daily use. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine digital depth gauge can optimise inspection workflows and to arrange supply or technical advice from Emmerich. Technical data SKU: M218.085.N GTIN: 4054469159812 Manufacturer: Metav IndustryLine Weight: 0.5 kg Measuring range: 0–200 mm Resolution: 0.01 mm (0.0005 in) Standard: DIN 862 Facts Measuring range min: 0 mm Measuring range max: 200 mm Bridge: 100 mm Battery: 3 V Tariff number: 90173000 Special features Material: hardened stainless steel Data output: RB 5 Digital display with ON/OFF, ZERO, UNIT, HOLD Probe tip included Delivered in protective case for transport FAQ What measuring range does the gauge cover? The instrument covers a 0–200 mm measuring range suitable for standard workshop and inspection tasks. How accurate is the digital readout? The digital display provides a 0.01 mm resolution (0.0005 in) for clear and precise depth readings. Is the gauge suitable for routine shop use? Yes; the hardened stainless construction and compact form make it durable for everyday machine‑shop measurements and quality checks. Does the instrument offer electronic data transfer? Yes; a data output (RB 5) is available for electronic recording and integration into inspection workflows. Is a protective case supplied? A protective case is included to safeguard the gauge during transport and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Digital Height And Depth Gauge With 25 x 12.5mm Anvil, 0.01mm Readout - Metav IndustryLine
The combination of high resolution (0.01 mm) and industrial-grade accuracy (< ±0.02 mm) makes this gauge a practical choice for tight-tolerance workshop tasks; its compact 20 mm range and 25 x 12.5 mm contact stop keep handling simple and repeatable. Order the instrument directly via Metav Werkzeuge or consult the Metav team for application advice. Digital height and depth gauge M219.010 — 20 mm range, 25 x 12.5 mm contact stop (Metav IndustryLine) The Digital height and depth gauge M219.010 is a compact measuring instrument for precise height and depth checks in small components and assembly work 20 mm measuring range for micro work High resolution 0.01 mm display Replaceable sliding measuring tip Contact stop 25 x 12.5 mm Accuracy that reduces rework and ensures conformity The gauge delivers an industrial-relevant accuracy < ±0.02 mm, combined with a 0.01 mm readout that supports concise decision-making at the bench. Such resolution is typical where small deviations influence fit or function; the tight tolerance helps to reduce scrap and rework by catching deviations early. The solid numeric values provide a clear basis for quality documentation, enabling consistent pass/fail criteria for production or maintenance tasks. Compact form for micro components and repeatable setups Designed for the micro-measurement band, this instrument’s 20 mm range places it in the compact category used for fine mechanical parts and delicate assemblies. The short measuring span keeps the slide rigid and handling straightforward, which benefits repeatability when inspecting small fittings, sockets or precision housings. A replaceable sliding measuring tip and the contact stop 25 x 12.5 mm support stable referencing on uneven surfaces, making the device suitable for both height and depth tasks where consistent datum contact is essential. Workflow integration, traceability and practical handling With a clear digital display and a compact footprint, the gauge integrates into inspection routines without adding complexity. The concise readout format speeds up checks on the production line or in a maintenance bay, improving throughput without sacrificing quality control. Metav IndustryLine’s product selection reflects workshop realities: instruments that are straightforward to operate, easy to store and robust enough for frequent use. Where traceable measurement records are required, numerical stability and repeatable contact geometry simplify documentation and reduce interpretive error. For precise, compact height and depth measurement choose the Metav IndustryLine Digital height and depth gauge M219.010 — contact Metav Werkzeuge for tailored advice or ordering at info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M219.010 Manufacturer: Metav IndustryLine Name: Digital height and depth gauge 20 mm, contact stop 25 x 12.5 mm SKU: M219.010 Facts Measuring range max: 20 mm Measuring range min: -20 mm Resolution/readout: 0.01 mm Accuracy: < ±0.02 mm Contact stop dimensions: 25 x 12.5 mm Special features Height and depth measurement capability Sliding, replaceable measuring tip Compact micro-range instrument for small parts Digital display for fast readout FAQ What is the smallest increment the gauge displays? The Digital height and depth gauge M219.010 shows measurements with a resolution of 0.01 mm, suitable for fine workshop tolerances. Can the instrument be used for both height and depth measurements? Yes. The device is designed for both height and depth checks and includes a 25 x 12.5 mm contact stop and a sliding tip that supports both functions. Is the measuring tip replaceable for specialised applications? The gauge features a replaceable sliding measuring tip, allowing adaptation to different reference geometries or wear replacement. Which measurement class does this gauge belong to? With a 20 mm maximum range, the instrument fits the compact "micro" category used for delicate or fine mechanical parts where rigidity and short spans aid precision. What identifier should be used when ordering or specifying the instrument? Use the article number M219.010 and the product designation Digital height and depth gauge when ordering or referencing the item. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
245 cm USB Interface For Digital Calipers 0.01/0.001 mm, PC Data Output - Metav IndustryLine
Take advantage of reliable PC logging and high-resolution capture by combining direct USB data transfer with selectable 0.01 mm / 0.001 mm resolution and an extended cable for flexible bench use; order or request advice through Metav Werkzeuge for a dependable supply chain and expert consultancy. USB Interface M220.250.2 — USB data adapter for digital calipers and micrometers, 0.01/0.001 mm, approx. 2.45 m cable (Metav IndustryLine) USB Interface M220.250.2 provides direct measurement logging to a PC for fast recording and audit-ready data files Direct USB transfer to PC for logging Choice of 0.01 mm or 0.001 mm resolution Compatible with RB 2 and RB 5 instrument outputs Saves measurements as text file and Excel table Faster, error‑free data capture from the workbench The interface converts measurement pulses into a stable USB data stream, enabling direct transfer of measurement values to a connected PC and reducing manual transcription errors. With selectable readouts at 0.01 mm or 0.001 mm, the adapter suits both standard quality checks and finer inspection tasks. Data can be stored as a text file or exported to Excel, creating an immediate audit trail and simplifying downstream reporting and process documentation. Seamless integration with existing measuring tools and software Designed for connection to instruments equipped with RB 2 or RB 5 outputs, the module pairs with digital calipers, depth calipers and micrometers used in many workshops and inspection stations. The device is supplied without the instrument connection cable, so the appropriate cable for the specific gauge must be used. Once connected, the system feeds measurements straight into spreadsheets or logging software, supporting traceable workflows and consistent quality-control routines. Compact, robust and easy to position at the bench Weighing approximately 0.06 kg and supplied with a cable of roughly 2.45 m, the unit is compact enough for portable use while offering enough reach for flexible bench layouts. The modest footprint and USB connectivity make it straightforward to add digital logging to existing benches without reworking the measurement set-up. The simple hardware reduces training time and keeps inspection processes efficient and repeatable, supporting steady throughput in routine and spot-check applications. For procurement or technical advice on integrating the Metav IndustryLine USB Interface M220.250.2 into inspection workflows, please contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M220.250.2 GTIN: 4054469163116 Weight: 0.06 kg Cable length: approx. 2.45 m Resolution: 0.01 mm / 0.001 mm Customs tariff: 90179000 eClass: 19050111 Facts Connection: USB to PC Instrument outputs supported: RB 2, RB 5 File formats: text file, Excel table Delivery: without connection cable to caliper/micrometer Special features Direct PC logging for audit-ready data Suitable for digital calipers, depth calipers, micrometers Compact, lightweight design for bench use Compatible with common spreadsheet software FAQ Is the interface compatible with standard digital calipers? Yes. The USB interface M220.250.2 (Metav IndustryLine) accepts measurement outputs from instruments with RB 2 or RB 5 interfaces and is suitable for most digital calipers used in workshop and inspection environments. What resolution options are available and when to use them? The adapter supports 0.01 mm and 0.001 mm resolution settings. Use 0.01 mm for routine shop-floor checks and 0.001 mm for finer inspection tasks that demand higher repeatability. Is a connection cable to the measuring instrument included? No. The M220.250.2 is supplied without the instrument connection cable; the correct cable for the specific caliper or micrometer must be obtained separately to connect the device to the interface. Which file formats are produced when logging measurements? Measurement values are exported as a text file and can be saved directly as an Excel table, enabling rapid import into quality-control reports and traceability records. Can the interface be used with depth callipers and micrometers? Yes. The device is intended for digital calipers, depth calipers and digital micrometers that provide RB 2 or RB 5 output signals; compatibility depends on the instrument's output standard. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Depth Gauge With Flat Tip 25×5×2mm, 0.01mm Resolution, Stainless Steel Housing, DIN 862 - Metav IndustryLine
Take advantage of the combination of 0.01 mm resolution, hardened stainless steel construction and a compact 0–25 mm measuring range for dependable depth measurement in tight assemblies. Order the instrument directly via Metav Werkzeuge or consult the specialists for assistance. Digital Depth Gauge M218.089 — 0–25 mm range, 0.01 mm resolution (Metav IndustryLine) The Digital Depth Gauge M218.089 is a compact, DIN 862‑compliant depth gauge designed for precise depth checks and inspection work in workshops and quality departments. Digital readout 0.01 mm resolution Hardened stainless steel construction Flat measuring probe 25×5×2 mm DIN 862 standard compliance Precision where confined spaces demand repeatable results The gauge delivers a resolution of 0.01 mm and a specified accuracy of ±0.03 mm, offering a clear balance between fine resolution and industrial robustness. With a measuring range of 0–25 mm, the instrument falls into the micro category for compact calipers, making it particularly suitable for fine mechanical and watchmaking tasks where short measuring faces remain torsion‑resistant. The small footprint and slim probe allow measurements in narrow recesses while maintaining a repeatable contact geometry, so measurement uncertainty is kept low even on small components. Robust construction to withstand workshop use Manufactured from hardened stainless steel and fitted with a metal housing, the gauge combines corrosion resistance with mechanical stability. The flat measuring tip (25×5×2 mm) provides a stable contact surface for shallow bores and stepped features, reducing rocking at the contact point. The overall weight of approximately 0.35 kg gives a reassuring feel in hand without compromising manoeuvrability. These design choices ensure that the device remains a practical tool for everyday inspection rather than a delicate laboratory instrument. Clear results and straightforward data handling A large digital display offers intuitive operation via ON/OFF, ZERO, UNIT and HOLD buttons for immediate readings and unit switching. The unit is powered by a 3 V battery for long service life under typical workshop conditions. For documentation or further processing, the gauge is equipped with an RB 5 data output, enabling connection to recording equipment or data loggers where traceable measurement records are required. This combination of readable output and data interface supports both single checks and documented inspection routines. Standards, practical features and workshop benefits Built to DIN 862, the instrument meets a recognised standard for depth measuring equipment, easing integration into quality procedures. The hardened stainless construction supports frequent use without rapid wear, and the compact dimensions suit confined assembly spaces. The gauge is supplied complete with the basic accessories and labelled identification (GTIN: 4054469163932), simplifying inventory and traceability for production or service departments. The robust design and standard compliance contribute to lower rework rates and more reliable assembly checks. Contact Metav Werkzeuge for tailored advice on the Metav IndustryLine depth gauge M218.089 and to confirm suitability for specific measurement tasks; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M218.089 GTIN: 4054469163932 Tariff number: 90173000 Standard: DIN 862 Manufacturer: Metav IndustryLine Facts Measuring range: 0–25 mm Resolution/readout: 0.01 mm Specified accuracy: ±0.03 mm Weight: 0.35 kg Bridge/foot length: 60 mm Special features Material: hardened stainless steel, metal housing Flat probe: 25×5×2 mm Display functions: ON/OFF, ZERO, UNIT, HOLD Power: 3 V battery Data output: RB 5 FAQ What is the measuring range and resolution of the depth gauge? The depth gauge offers a measuring range of 0–25 mm with a resolution of 0.01 mm and a specified accuracy of ±0.03 mm, suitable for micro‑range depth checks. Is the instrument compliant with recognised standards? Yes, the instrument is manufactured in accordance with DIN 862, ensuring it meets common workshop and inspection requirements. What material is used for the gauge and the probe? The gauge is made from hardened stainless steel and features a metal housing with a flat probe of 25×5×2 mm for stable contact. Can measurement data be exported from the gauge? The gauge includes an RB 5 data output for external recording or integration with data loggers and documentation systems. What power source does the unit require? The instrument operates from a 3 V battery, providing reliable operation for routine inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Digital Depth Gauge With Round 2.5mm Probe, Auto Power-Off, 0.01mm Resolution - Metav IndustryLine
Take advantage of a compact, workshop‑ready design with a 0–25 mm measuring range and a Ø 2.5 mm round probe for accessible bore measurement; the integrated automatic switch‑off conserves the 3 V battery. Order the Digital depth gauge M218.091 directly via Metav Werkzeuge or ask our consultants if technical advice is needed. Digital depth gauge M218.091 – 0–25 mm, Ø 2.5 mm round probe (Metav IndustryLine) The Digital depth gauge M218.091 is a compact, battery‑powered instrument for precise depth measurement tasks in small‑part inspection and workshop use. Digital display with mm/inch and ABS function Automatic power-off to conserve battery Round Ø 2.5 mm depth probe for small bores Compact 0–25 mm range with 53 mm bridge Precise, compact depth measurement for fine tasks The instrument combines a clear digital display with a standard resolution of 0.01 mm and a stated accuracy of ±0.05 mm, making it suitable for routine workshop checks and quality control where repeatable results are required. The 0–25 mm measuring range places the device in the micro category for measuring tools, which is ideal for fine‑mechanical work and components with limited access. The round Ø 2.5 mm depth probe provides entry to narrow bores and recesses, while the 53 mm bridge supports stable alignment during measurement. The electronics include mm/inch, ABS and zero functions to facilitate quick conversion and reference setting. Lightweight handling and access to confined features Made from robust plastic, the gauge is deliberately lightweight at 0.35 kg, easing one‑handed operation and reducing operator fatigue during repetitive checks. The curved measuring faces and the small‑diameter probe permit measurements in confined cavities and stepped features without the need for additional fixtures. The compact dimensions and ergonomic form mean faster set‑up times on the shop floor and simpler handling for bench and assembly tasks. Where space is limited, the rounded probe and short measuring range enable accurate depth readings without overextending the instrument. Efficient operation, low running costs and dependable results Operation is straightforward thanks to a dedicated ON/OFF key and an automatic switch‑off that extends battery life; the gauge runs from a 3 V battery that is easy to replace. The ABS mode locks the reading to prevent drift when repositioning, saving time during comparative measurements. Routine cleaning of the measuring faces and careful handling of the probe maintain measurement quality; abrasive cleaning agents should be avoided to protect surfaces. Backed by Metav’s approach to accessible precision, the instrument offers a reliable combination of usability and measured performance for workshops and inspection stations. Contact Metav Werkzeuge for a tailored quotation or technical advice on the Metav IndustryLine M218.091; our Emmerich team is ready by e‑mail or phone. Technical data Article number: M218.091 GTIN: 4054469181431 Brand: Metav IndustryLine Facts Measuring range: 0–25 mm Resolution: 0.01 mm Accuracy: ±0.05 mm Bridge length: 53 mm Weight: 0.35 kg Special features Material: plastic Measuring faces: curved Measuring tip: Ø 2.5 mm round probe Power supply: 3 V battery Display functions: ON/OFF, ZERO, mm/inch, ABS Extra: automatic switch‑off FAQ What is the measuring range of this depth gauge? The Digital depth gauge M218.091 measures from 0 to 25 mm, classifying it in the micro range for fine‑mechanical and small‑part work. How accurate and precise are the readings? Readings are displayed with 0.01 mm resolution and the instrument specification lists an accuracy of ±0.05 mm for routine inspection tasks. Can the gauge measure inside small bores? Yes. The Ø 2.5 mm round probe is designed to access narrow bores and recesses for reliable depth checks with the Metav IndustryLine gauge. What functions are available on the digital display? The unit includes ON/OFF, ZERO, mm/inch conversion and ABS mode to lock reference readings, simplifying comparative and multi‑step measurements. Is the gauge suitable for repetitive workshop use? The lightweight plastic construction and automatic switch‑off make the gauge practical for frequent use; regular cleaning of the measuring faces is advised to ensure consistent results. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Small Depth Gauge Digital IP67 0.01mm Resolution, Bridge Length 48mm - HELIOS-PREISSER
Take advantage of the combination of compact design, robust IP67 protection and high measuring resolution for reliable depth checks in production and inspection. The small footprint and a 48 mm bridge length ensure stable measurements, while the 0.01 mm reading step supports fine tolerance control. Order the DIGI‑MET directly via Metav Werkzeuge or ask our consultants if needed. DIGI‑MET Mini Depth Caliper IP67 25 mm — Helios‑Preisser DIGI‑MET is a compact digital depth caliper for precise depth measurements up to 25 mm in workshop and metrology environments Compact 25 mm measuring range High resolution 0.01 mm Robust IP67 protection 48 mm bridge length for stable support Precise measurement to support consistent quality The instrument delivers a 0.01 mm reading increment, enabling fine depth control where repeatability matters. As a digital depth gauge, it replaces manual depth checks with a clear numeric readout, reducing interpretation errors and accelerating inspection routines. The combination of a small measuring span and a precise display is particularly valuable for tasks where micrometre-level adjustments affect assembly fit or functional tolerances. This accuracy supports efficient process decisions and reduces rework. Reliable operation under harsh conditions Built with an IP67 rating, the device withstands dust ingress and temporary immersion, making it suitable for shop-floor use and harsher production environments. The sealed design protects the measuring system from particulate contamination and coolant splashes, which preserves calibration intervals and reduces downtime. The 48 mm bridge length gives the gauge a stable contact surface, helping to maintain consistent contact geometry and thus reliable depth readings even on uneven workpieces. Compact handling that fits busy workflows The small form factor makes the instrument practical for bench inspection and close-quarter checks in machining cells. The compact construction minimises interference when measuring inside restricted assemblies or mould cavities. Data acquisition becomes more straightforward with a clear digital display, and the solid build reduces sensitivity to hand movement during measurement, supporting reproducible results across different operators. The instrument integrates easily into a quality routine where speed and repeatability are required. Contact Metav Werkzeuge today to discuss the DIGI‑MET Mini Depth Caliper, arrange technical advice or request delivery from Emmerich for reliable supply to the workshop. Technical data Article number: 4000851180NW Type: DIGI‑MET Product: Mini depth caliper Brand: Helios‑Preisser Facts Measuring range: 25 mm Resolution: 0.01 mm Bridge length: 48 mm Packaging unit: 1 Special features IP67 protection Digital measuring system (DIGI‑MET) Compact depth caliper design FAQ What is the maximum measuring range of the DIGI‑MET depth caliper? The measuring range is 25 mm for the DIGI‑MET mini depth caliper (Helios‑Preisser, SKU 4000851180NW). How fine is the display resolution on this depth gauge? The instrument provides a reading increment of 0.01 mm, allowing precise depth control for inspection tasks. Is the device suitable for use in workshop environments with coolant or dust? Yes, the IP67 rating ensures protection against dust ingress and temporary immersion, making it suitable for demanding workshop conditions. Manufacturer / Responsible: Mahr GmbH Helios‑Preisser Vertrieb; Ölbergstraße 19; 72501 Gammertingen; Germany; +49 7574 400-60
25mm Tire Tread Depth Digital Caliper 60mm Bridge, 0.01mm Resolution, mm/inch Display - Metav IndustryLine
Take advantage of fast, repeatable readings with a digital display and 0.01 mm resolution, combined with a stable 60 mm bridge for consistent tyre‑tread checks; order the caliper directly via Metav Werkzeuge or contact our consultants for tailored advice. Digital tyre tread caliper M218.084 — compact digital caliper, 0–25 mm range, plastic housing (Metav IndustryLine) The Digital tyre tread caliper M218.084 is a compact, workshop‑oriented digital caliper designed for rapid tyre‑tread depth checks and small‑part inspection within the micro measurement class Digital display with mm/inch switching Compact plastic housing for easy handling 60 mm bridge for stable contact Repeatable, measurable accuracy for tyre inspection The instrument provides clear digital read‑out with a standard 0.01 mm resolution and an inch equivalent of 0.0005 in, so measurements are immediately comparable across inspection protocols. The 60 mm bridge ensures stable seating on a tread groove, reducing wobble and improving repeatability during quick checks. With a defined measurement span in the micro class, this caliper is optimised for fine‑scale tasks: it delivers the quick numeric evidence required for quality checks and maintenance records, translating raw readings into reliable decision data. Designed for fast workshop workflows A dedicated control layout — on/off, zero and mm/inch buttons — enables single‑handed operation and fast conversion between units, cutting the time needed for each inspection. The lightweight plastic housing keeps handling comfortable during repeated use while the digital interface removes interpretation errors inherent to analogue scales. The result is a practical balance of speed and precision: routine tyre checks become a reliable step in maintenance cycles rather than a bottleneck. Practical robustness with focused measurement scope Built for focused tasks rather than general heavy‑duty metrology, this caliper suits inspection benches and service bays that prioritise agility and easy storage. The construction concentrates on the requirements of tyre and small component measurement: compact profile, a measurable span that fits the micro category (10–100 mm class), and a bridge for consistent contact. The device supports clear pass/fail decisions and integrates easily into existing inspection routines without complex setup. Contact Metav Werkzeuge today for consultation and to secure the Metav IndustryLine digital tyre tread caliper M218.084 — a compact measuring tool for reliable, fast tread assessments. Technical data Article number: M218.084 GTIN: 4054469111629 ECLASS: 21170349 Customs tariff number: 90173000 Manufacturer: Metav IndustryLine Facts Measurement range: 0–25 mm Resolution: 0.01 mm / 0.0005 in Bridge length: 60 mm Digital display: on/off, zero, mm/inch Accuracy: 0.2 Special features Housing material: Plastic Measurement type: Digital caliper for tread and small parts Classification: Micro class (max 10–100 mm) Compact format for bench and mobile inspections FAQ What measurement range does this caliper cover? The caliper covers a measurement span from 0 to 25 mm, suitable for tyre‑tread depths and small component checks. How fine is the display resolution? The instrument displays measurements with a 0.01 mm resolution (0.0005 in), providing clear numeric feedback for inspection records. Does the caliper read in inches as well as millimetres? Yes — the digital read‑out supports quick switching between mm and inch via the dedicated control button. Is the device suitable for professional workshop use? Designed for workshop workflows, the caliper offers stable contact via its 60 mm bridge and a user‑friendly digital interface for efficient, repeatable checks. Which materials is the housing made from? The housing is manufactured from plastic, chosen for ergonomic handling and lightweight inspection tasks. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.5 mm Socket Adapter for 2.5 mm Foot Switch, PC Data Transfer Compatible - Metav IndustryLine
Take advantage of the combination of compatibility with Interface 220.281, direct PC data transfer and a compact, lightweight form factor to streamline measurement workflows; order the adapter directly via Metav Werkzeuge or consult our technical team for application advice. Jack adapter M220.255.A — footswitch connector, 2.5 mm to 3.5 mm (Metav IndustryLine) The Jack adapter M220.255.A adapts a 2.5 mm footswitch plug to a 3.5 mm jack for seamless connection to the Interface 220.281, enabling PC-based capture of measurement events in industrial metrology setups. *Converts 2.5 mm footswitch plug to 3.5 mm *Compatible with Interface 220.281 for PC transfer *Measurement data savable as text and Excel *Compact adapter, lightweight 0.18 kg Seamless integration with existing measurement systems The adapter is designed for straightforward integration into digital measuring workflows where a footswitch must be connected to a data-acquisition interface. By converting a 2.5 mm footswitch plug to a 3.5 mm jack and pairing with Interface 220.281, measurement events can be captured and recorded directly at the workstation. This eliminates manual transcription, reduces error sources and accelerates documentation, while the ability to save data as text or Excel files supports immediate further processing in quality control systems. Practical design that reduces downtime A compact and lightweight adaptor reduces strain on connector assemblies and keeps bench space clear. The simple mechanical function — secure jack conversion — means fewer failed connections and quicker changeovers between instruments. For workshops and production lines where minimising interruptions is key, this accessory supports continuous operation by resolving a common connectivity mismatch without the need for bespoke cabling or modifications to existing instruments. Quick setup and compatible operation notes Set-up requires the Interface 220.281 for PC communication; once connected, measurement triggers from the footswitch are transmitted via the interface and may be exported as text or Excel files for traceable records. The adapter suits accessory-level use in metrology and inspection environments and is classified under measuring-device accessories. For bespoke integration into measurement software or PLC systems, consult the interface documentation and consider the standard PC ports supported by the Interface 220.281. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine jack adapter M220.255.A with existing equipment or to discuss delivery and compatibility at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M220.255.A GTIN: 4054469146935 Eclass: 19050111 Customs tariff number: 90178090 Numbers / Core data Weight: 0.18 kg Connector sizes: 2.5 mm → 3.5 mm Special features Compatible with Interface 220.281 Measurement data transferable to PC; savable as text and Excel Category: Accessories (Measuring devices → Accessories) FAQ Is this adapter suitable for converting a 2.5 mm footswitch to a 3.5 mm jack? Yes. The adapter is specifically designed to convert a 2.5 mm footswitch plug to a 3.5 mm jack for use with Interface 220.281 in metrology setups. Can measurement triggers be stored on a computer? Yes. When used with Interface 220.281, measurement events passed through the adapter can be saved as text files and Excel spreadsheets for documentation and analysis. Does the adapter include the Interface 220.281 or other cables? No. The jack adapter M220.255.A is an accessory for connector conversion; the Interface 220.281 and any required cables are supplied separately. Will this adapter work with standard metrology software? The adapter itself performs physical conversion; compatibility with software depends on the Interface 220.281 and the receiving application. Data exported as text or Excel is compatible with common quality and spreadsheet programmes. How portable is the adapter for workshop use? With a weight of 0.18 kg and compact dimensions, the adapter is easy to fit into tool kits or bench assemblies and is intended for routine workshop and inspection use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3000mm Depth Caliper Colour Touchscreen Wireless USB IP54, ISO 17025 - Microtech Metrology
Take advantage of the combination of extra‑long reach, reliable digital data transfer and traceable calibration to standardise large‑component inspection. The included ISO 17025 calibration certificate and integrated Wireless+USB output ensure reproducible results and efficient data capture; order via Metav Werkzeuge or consult our specialists for application advice. Depth Caliper — extra‑long digital depth measuring instrument with 2.4" colour touchscreen (Microtech Metrology) The Depth Caliper is a purpose‑built digital depth measuring instrument for long‑range measurements up to 3,000 mm, designed for workshop and heavy‑duty machining environments. 2.4" colour touchscreen display Wireless and USB data output ISO 17025 calibrated with certificate Extra‑long 3,000 mm measuring range Measure large components with consistent repeatability With a measuring range of 3,000 mm, this instrument targets large assemblies where conventional calipers fall short. The extra‑long classification addresses measurements in pipe, vessel and heavy‑machining contexts where reach and profile stiffness are decisive for reproducible results. The device’s specified accuracy 0.09 mm and display resolution 0.01 mm give a clear technical basis for accept/reject decisions in production and incoming inspection. For quality managers this means predictable measurement uncertainty across extended lengths, while workshop teams benefit from a single tool that reduces the need for multiple gauges. Modern interface and seamless data capture for efficient workflows A bright 2.4" colour touchscreen presents readings clearly even under workshop lighting, while Wireless+USB connectivity removes manual transcription and accelerates data logging into SPC systems. Integration of digital transfer supports traceable quality records and lowers the risk of human error during shift changes or batch inspections. The caliper’s IP54 protection rating and hand‑finished measuring jaws ensure robust contact and resistance to dust and splashes, so the instrument remains dependable on the shop floor and in fixture setups. Traceable calibration and dependable construction for critical tasks Delivered with an ISO 17025 calibration certificate, the instrument provides documented traceability suitable for accredited quality processes and audit requirements. The manufacturer’s focus on precision manufacturing and finishing reduces setup variance and improves measurement reproducibility for serial inspection tasks. The combination of long reach, documented accuracy and solid workshop protection makes this digital depth gauge a pragmatic choice when long‑range measurement must be both accurate and auditable. Choose Microtech Metrology’s depth caliper for reliable long‑range measurement — contact Metav Werkzeuge in Emmerich for specification support, delivery options and application guidance: info@metav-werkzeuge.com / +49 2822 7131930. Technical Data Article number: 1432013007 GTIN: 4061905459726 Manufacturer: Microtech Metrology Facts Measuring range: 0–3000 mm Resolution: 0.01 mm Accuracy: 0.09 mm Display: Colour 2.4" touchscreen Protection class: IP54 Special features ISO 17025 calibration with certificate Data output: Wireless + USB Hand‑finished measuring jaws Digital depth caliper Extra‑long measurement classification FAQ Is a calibration certificate supplied with the instrument? Yes. The Depth Caliper from Microtech Metrology is supplied fully calibrated to ISO 17025 and includes the calibration certificate for traceability. What measuring tasks is this caliper suitable for? The instrument is intended for extra‑long measurements up to 3,000 mm, making it suitable for large components such as pipes, housings and heavy‑machined parts where extended reach and repeatability are required. How are measurements exported for quality documentation? Measurements are transmitted via the integrated Wireless and USB data output options; the Microtech Metrology depth caliper supports direct capture into measurement logging or SPC systems. What resolution and accuracy can be expected in use? The device provides a resolution of 0.01 mm and a stated accuracy of 0.09 mm, appropriate for long‑range workshop inspection where reach is prioritised alongside practical precision. Is the caliper protected against workshop conditions? Yes. The depth caliper features an IP54 protection rating and robust, hand‑finished measuring jaws to withstand typical dust and splash exposure on the shop floor. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
3000mm Depth Caliper Digital Swiss Digit 11mm Display, IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of long-range capability, dust‑ and water‑resistant protection, and factory calibration for reliable metrology of large components; the device’s Swiss Digit display and fine resolution support clear readings across its full span. Order the instrument directly via Metav Werkzeuge or consult the Metav specialists for application advice. Depth Caliper — Digital, 0–3000 mm, IP67 (Microtech Metrology) Depth caliper for precision depth measurement of large-format components and heavy‑duty workshop metrology 0–3000 mm measuring range IP67 protection for harsh environments ISO 17025 calibration with certificate Swiss Digit 11 mm display, 0.01 mm resolution Accurate long‑range measurement for large parts This instrument is engineered for measurement tasks that extend beyond standard workshop sizes: the 0–3000 mm span places it in the Extra‑Long class, which is suited to large housings, long shafts and sizeable assemblies. The large measuring range combined with a fine display resolution of 0.01 mm and a clearly readable Swiss Digit 11 mm readout reduces reading errors and speeds up inspection routines. The combination of range and display clarity delivers reproducible depth data across long distances, helping to maintain process stability when measuring large components. Calibrated traceability and metrology-grade build Delivered fully calibrated to ISO 17025, the caliper arrives with an official calibration certificate that documents traceability and measurement uncertainty. This certified calibration supports quality assurance and conformity checks in regulated production environments. Precision contact faces are hand‑crafted measuring faces, a detail that improves seating on measured surfaces and reduces tilt-induced error. Although the nominal accuracy is specified as 0.1 mm, the high display resolution and certified calibration make the instrument a dependable tool for large‑format inspections where documented traceability is required. Robust protection and workshop usability Designed for use on the shop floor, the unit carries an IP67 rating for dust-tight and temporary immersion resistance, which keeps the electronics and slider protected in demanding conditions. The digital electronics are housed behind the Swiss Digit display for fast, unambiguous readout; the robust construction minimises flex over long spans, aiding repeatability. For handling and measurement planning this Extra‑Long category instrument benefits from deliberate handling procedures and suitable supports to ensure stable measurements along its full length. Clear labelling and the durable readout support efficient integration into incoming, in‑process and final inspection workflows. Contact Metav Werkzeuge for application-specific advice and ordering; the Metav team in Emmerich can confirm suitability for particular large‑format tasks and provide the required documentation. Technical data Article number: 1432013003 GTIN: 4061905459832 Brand: Microtech Metrology Model type: Digital depth caliper Display: Swiss Digit height 11 mm Facts Measuring range: 0–3000 mm Resolution: 0.01 mm Accuracy: 0.1 mm Protection class: IP67 Display height: 11 mm Special features Delivered calibrated to ISO 17025 with certificate Hand‑crafted measuring faces Digital readout Classified as Extra‑Long measuring range (2000–5000 mm) FAQ Is the caliper supplied with a calibration certificate? Yes. The depth caliper is delivered fully calibrated to ISO 17025 and includes an official calibration certificate for traceability. What environments is the instrument suitable for? The IP67 protection class ensures the instrument resists dust ingress and temporary immersion, making it suitable for demanding workshop and shop‑floor conditions. What accuracy and resolution can be expected for large measurements? The readout provides a 0.01 mm resolution; the specified accuracy is 0.1 mm, and the ISO 17025 calibration documents the measurement uncertainty across the stated range. Can the device be used for very long workpieces such as shafts or housings? Yes. With a measuring range up to 3,000 mm, the caliper is designed for long components; stable support and correct handling are recommended to ensure reproducible results. Which manufacturer produced this instrument and what is the article number? The instrument is produced by Microtech Metrology; article number 1432013003 is listed for ordering and documentation purposes. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
3000mm Depth Gauge Digital Wireless Swiss Digit Display 11mm, IP67, ISO 17025 Calibration - Microtech Metrology
Take advantage of robust IP67 protection, wireless data transfer and an ISO 17025 calibration certificate for reliable, reproducible depth measurements over long spans; order the instrument via Metav Werkzeuge or consult our technical team for project-specific recommendations. Depth Caliper — Digital depth gauge with wireless data output by Microtech Metrology The Depth Caliper is a wireless digital depth gauge designed for extra‑long measurements in fabrication, inspection and heavy‑duty workshop environments. Digital display Swiss Digit 11mm Wireless data output IP67 protection for wet environments Delivered calibrated to ISO 17025 Reproducible long‑range depth measurement for large components The instrument is built for extra‑long measurement tasks and covers a measuring range up to 3,000 mm, combining reach with a profile intended to retain stiffness across the span. This construction reduces deflection and supports reproducible depth readings on large housings, pipes and welded assemblies where standard calipers lack reach. The robust measuring beam translates into fewer setup steps and lower rework rates for prototype and series production. Durable construction and environmental protection for shop floors Designed to tolerate demanding conditions, the gauge features IP67 ingress protection and handcrafted measuring jaws that improve contact consistency and resist wear. The sealed electronics and corrosion‑resistant components make the tool suitable for coolantsprayed workstations or dusty fabrication areas, while precise jaw finishing sustains measuring accuracy over prolonged use. These characteristics support dependable operation in both inspection benches and mobile workshop setups. Traceable calibration and clear digital readout for quality assurance Delivered with an ISO 17025 calibration certificate, the depth gauge provides a documented reference for internal audits and supplier acceptance testing. The high‑contrast Swiss Digit display (11 mm) offers immediate legibility, and the instrument’s stated accuracy of 0.1 mm is backed by the calibration documentation. Wireless data output simplifies transfer of readings to SPC systems or inspection logs and reduces manual transcription errors, speeding up quality control cycles without compromising traceability. Workflow benefits that reduce errors and save time Integration of the wireless interface and clear numeric display supports faster measurement sequences and a smoother handover to digital inspection routines. The combination of a long measuring range, sealed construction and factory calibration makes the device a practical choice where long‑span depth checks are frequent and documentation is required. The instrument therefore acts as a reliable link between on‑floor measurement and central quality records, helping to standardise inspection across shifts and teams. Contact Metav Werkzeuge for tailored advice on Microtech Metrology depth gauges and to arrange delivery from our Emmerich quality centre; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 1432013004 GTIN: 4061905459863 Manufacturer: Microtech Metrology Numbers / Core technical data Measuring range: 0–3000 mm Display type: Swiss Digit, height 11 mm Accuracy: 0.1 mm Data output: Wireless Protection class: IP67 Special features / Design Digital depth caliper construction Handcrafted measuring jaws Delivered calibrated to ISO 17025 (certificate included) Suitable for heavy‑duty fabrication and inspection environments FAQ What measuring range is covered by this depth caliper? The depth caliper from Microtech Metrology covers a range from 0 up to 3,000 mm, making it appropriate for extra‑long depth checks on large components and assemblies. Is the instrument suitable for damp or coolant‑exposed environments? Yes; the device is rated IP67, which protects electronics against dust ingress and temporary immersion, supporting use at production benches where coolant or fine particulates are present. Does the tool come with calibration documentation? The depth caliper is supplied with an ISO 17025 calibration certificate, providing traceable documentation for quality systems and audit requirements. How are measurement values transferred to inspection software? Readings are output via a wireless interface to compatible data collection systems, reducing manual entry and accelerating statistical process control workflows. What level of accuracy can be expected during routine inspections? The instrument specifies an accuracy of 0.1 mm, supported by the factory calibration; the Swiss Digit display ensures readings are easy to read and record. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Depth Caliper 0.01mm Resolution Hardened Guide Rail IP67 - HELIOS-PREISSER
Take advantage of the combination of robust protection and fine 0.01 mm resolution for reliable depth measurement in production and inspection. Order the instrument via Metav Werkzeuge or consult Metav's specialists for technical questions and fast delivery from Emmerich. DIGI‑MET Depth Caliper DIN 862 — IP67 protection, 300 mm range (Helios‑Preisser) DIGI‑MET depth caliper for precise workshop and inspection use, combining a digital readout with industrial protection and a stable measuring beam DIN 862 compliant depth caliper IP67 dust and immersion protection 0.01 mm resolution for fine measurement Robust 12 x 4 mm measuring beam Precision that reduces rework and shortens inspection time The DIGI‑MET depth caliper offers a high-precision 0.01 mm resolution across a 300 mm measuring span, enabling reliable detection of small deviations that otherwise cause rework. Compliance with DIN 862 provides a recognised metrology standard for depth gauges, which supports consistency in quality documentation. The clear, immediate digital readout reduces reading errors and speeds up inspection cycles, so measurement tasks integrate smoothly into production processes without unnecessary delays. Built to withstand workshop conditions and maintain calibration Designed for demanding environments, the instrument carries an IP67 rating; this denotes full protection against dust ingress and temporary immersion, maintaining reliable function where coolant, chips and contaminants are present. The 12 x 4 mm measuring beam offers a compact but stable profile that resists bending during routine use. These features translate into less downtime and fewer calibration checks, which benefits workshops that need dependable tools for daily quality control. Digital convenience with industrial reliability The digital interface provides immediate numerical results suitable for fast decision-making on the shop floor. The electronic readout is engineered to support rapid measurement workflows while preserving repeatability expected in professional metrology. The instrument’s simple operation pairs well with statistical process control routines, so measurement data can be recorded or transferred into existing quality procedures without complex handling or interpretation. A supplier relationship that supports precision long term Metav Werkzeuge acts as a practical partner for workshops and distributors, ensuring supply continuity from Emmerich. Metav’s role as a quality filter for the European market and a broad offering of precision instruments make it straightforward to centralise procurement and maintain consistent tool standards. With an established customer base and a large product range, Metav supports secure logistics and professional advice for integration into any inspection bench. Contact Metav Werkzeuge today to discuss supply, suitability and delivery of the Helios‑Preisser DIGI‑MET depth caliper and secure fast, reliable shipment from Emmerich. Technical Data Article number: 4000851177NW UID: 4000851177NW Manufacturer: HELIOS-PREISSER Type: DIGI-MET Product: Depth caliper Facts Measuring range: 300 mm Resolution: 0.01 mm Measuring beam cross-section: 12 x 4 mm Bridge length (addition): 150 mm Packaging unit: 1 Special features DIN 862 standard compliance IP67 protection class Digital readout (DIGI‑MET) FAQ What accuracy can be expected from the instrument? The instrument provides a 0.01 mm resolution; this level of accuracy is suitable for routine workshop and laboratory depth measurements with high repeatability. Is the gauge suitable for use in oily or wet environments? Yes. The IP67 rating indicates protection against dust ingress and temporary immersion, making the gauge resistant to common workshop fluids. Does the tool comply with any standard? The gauge is specified to meet DIN 862, ensuring conformity with recognised depth gauge requirements for industrial metrology. Manufacturer / Responsible: Mahr GmbH Helios-Preisser Vertrieb; Ölbergstraße 19; 72501 Gammertingen; Germany; +49 7574 400-60
300mm Depth Caliper 10 x 4.5mm Bridge Jaw 0.05mm Resolution - TECWERK
Benefit from precise depth measurement together with a rigid guiding profile and a practical 300 mm range for consistent inspection results; order directly via Metav Werkzeuge or request guidance from our consultants. TECWERK Depth Caliper (DIN 862) — 300 mm, 0.05 mm resolution The TECWERK Depth Caliper DIN 862 is a workshop-grade depth gauge for reliable depth checks, inspection tasks and routine quality control across mechanical and metalworking environments. 300 mm measuring range for deep bores 0.05 mm resolution for precise depth readings Rigid 10 x 4.5 mm flat guide Compliant with DIN 862 standard Dependable accuracy for production and inspection A robust measuring instrument designed for repeatable depth measurement across a wide working range. With a 300 mm measuring span and a readout resolution of 0.05 mm, the caliper supports fine depth control for components and fixtures where tolerance adherence matters. Conformity to DIN 862 provides a verifiable specification basis and eases documentation in inspection routines. The clear numeric resolution reduces interpretation time and supports faster decision-making on the shop floor, improving process throughput and lowering rework risk. Stable guide for repeatable results The straight guide bar, with a cross-section of 10 x 4.5 mm, provides the necessary stiffness to minimise lateral play during measurement. A rigid flat guide reduces skewing and ensures the probe contacts the measured surface squarely, which increases repeatability when measuring multiple features. The additional bridge length of 150 mm enables reach into deeper pockets and recesses while maintaining support close to the measuring point, which is particularly beneficial for repetitive checks in assembly and quality control environments. Practical integration into workshop routines Designed for straightforward handling and quick checks, the instrument suits busy workshops and inspection benches where rapid, reliable readings are required. The compact measuring concept and the robust guiding profile allow fast setup and consistent results without elaborate fixtures. For procurement and supply chain reliability, Metav Werkzeuge provides centralised sourcing and distribution from Emmerich, combining broad product selection with a transparent fulfilment process that supports stable workshop inventory planning. Contact Metav Werkzeuge to discuss the TECWERK Depth Caliper (SKU 2000851219NW) and arrange supply directly from Emmerich for dependable depth measurement in everyday production. Technical data Article number: 2000851219NW Description: Depth caliper DIN 862, 300 mm, straight guide 10 x 4.5 mm, TECWERK Manufacturer: TECWERK Facts Measuring range: 300 mm Resolution: 0.05 mm Cross-section: 10 x 4.5 mm Bridge length: 150 mm Packaging unit: 1 Special features Compliance: DIN 862 Straight guide rail (gerade Schiene) Designed for workshop and inspection use FAQ How precise are the measurements taken with this depth caliper? The TECWERK Depth Caliper (DIN 862, SKU 2000851219NW) offers a resolution of 0.05 mm, enabling fine depth control suitable for routine inspection and production checks. Is this caliper suitable for measuring deep recesses and pockets? Yes. The 300 mm measuring range combined with a bridge length of 150 mm allows access into deeper bores and recesses while maintaining stable guidance for consistent readings. What makes the guiding profile reliable for repetitive checks? The straight guide with a 10 x 4.5 mm cross-section provides stiffness that reduces lateral play, improving repeatability when performing repeated depth measurements with the TECWERK depth gauge. Does the instrument meet recognised standards for workshop measuring tools? The device is specified to DIN 862, which supports traceable documentation and familiar calibration frameworks commonly used in industrial quality processes. How is the product supplied and what is the unit quantity? The item is supplied as a single unit (packaging unit 1) under SKU 2000851219NW, suitable for direct integration into workshop inventories. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
300mm Depth Caliper Digital Touchscreen Wireless USB IP54, ISO 17025 Calibrated - Microtech Metrology
Combining ISO 17025 calibration, reliable ±0.025 mm accuracy and wireless data transfer delivers traceable, shop-ready results and faster documentation. Order the calibrated depth caliper directly via Metav Werkzeuge or request advice from our consultants. Depth Caliper (Digital) by Microtech Metrology — 1.54" colour touchscreen, Wireless + USB The Depth Caliper is a digital depth gauge designed for standard machine‑shop and workshop measurements up to 300 mm, offering a compact, robust tool for quality control and production tasks. Factory ISO 17025 calibration with certificate 0–300 mm standard measuring range Colour 1.54" touchscreen display Wireless + USB data output Traceable accuracy for production control The instrument is delivered fully calibrated to ISO 17025, which guarantees measurement traceability and acceptance in regulated workflows. With an indicated accuracy of ±0.025 mm and a reading step of 0.005 mm, the device supports reliable pass/fail decisions and reduces rework caused by uncertain measurements. This level of performance positions the caliper as a dependable tool for statistical process control and routine inspection where documented measurement uncertainty is required. Faster documentation and fewer transcription errors Equipped with Wireless + USB data output and a 1.54" colour touchscreen, the gauge streamlines data capture and transfer into measurement systems or SPC software. The responsive digital display shortens cycle time for repetitive depth checks, while direct export avoids manual entry errors that slow production. The combination of touchscreen controls and digital connectivity increases throughput and simplifies traceability in batch production environments. Robust design for everyday workshop use Built with handmade measuring jaws and an IP54 protection rating, the caliper withstands typical workshop conditions while preserving measuring faces from abrasion. Classified in the Standard range (0–300 mm), it balances reach and rigidity—suitable for metalworking and general mechanical tasks where one‑hand operation and repeatability matter. The depth gauge design delivers clear contact geometry for slot, bore and recess measurements, making it a versatile addition to a quality‑focused toolbox. For calibrated precision and integration support from Microtech Metrology, contact Metav Werkzeuge in Emmerich for tailored advice and delivery options Technical Data SKU: 1432010307 GTIN: 4061905039072 Manufacturer: Microtech Metrology Category: Digital caliper (depth gauge) Facts Measurement range: 0–300 mm Accuracy: ±0.025 mm Resolution / reading step: 0.005 mm Display: Colour 1.54" touchscreen Protection class: IP54 Data output: Wireless + USB Calibration: ISO 17025 certificate included Special features Handmade measuring jaws Digital depth measurement instrument Colour touchscreen interface Wireless data transfer and USB connectivity Standard‑range caliper for workshop and machine‑shop use FAQ Is the depth caliper supplied with a calibration certificate? Yes. The Microtech Metrology depth caliper (SKU 1432010307) is delivered fully calibrated to ISO 17025 and includes the calibration certificate. What measurement range does the instrument cover and where is it best applied? The instrument covers 0–300 mm and is classified as a Standard‑range caliper, making it ideal for machine‑shop and general workshop measurements such as recess, bore and slot depths. What accuracy and resolution can be expected from the device? The depth caliper achieves ±0.025 mm accuracy with a 0.005 mm reading step, suitable for shop‑floor quality control and production documentation. How can measurement data be exported from the caliper? Data can be exported via Wireless connection or USB; the colour touchscreen facilitates quick configuration and transfer to PCs or data‑logging systems for SPC workflows. Is the instrument suitable for use in dusty or humid workshop environments? The caliper has an IP54 rating, offering protection against dust ingress and splashes—appropriate for standard workshop conditions but not for immersion. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Depth Caliper Digital Wireless Swiss Digit Display 0.01mm Resolution IP67, ISO 17025 Calibration - Microtech Metrology
Take advantage of a calibrated measuring instrument that combines ISO 17025 traceability, wireless data transfer and IP67 protection to streamline inspection tasks; request details or order the depth caliper directly via Metav Werkzeuge for fast delivery and expert advice. Depth Caliper — Digital depth caliper with wireless data and IP67 protection by Microtech Metrology The Depth Caliper is a digital measuring instrument designed for precise depth measurements in workshop and inspection environments, covering a measuring range up to 300 mm and suited to standard machining and metalworking tasks. Wireless data transfer for fast measurement logging 11 mm Swiss Digit display for clear readings IP67 protection for dust and water resistance ISO 17025 calibration included with certificate Precise, traceable readings that support quality control The instrument delivers a reading resolution of 0.01 mm and an accuracy of ±0.03 mm, providing reproducible results for routine inspection and workshop measurement tasks. Calibrated according to ISO 17025, the device is supplied with a calibration certificate, which supports audit trails and quality documentation in production and laboratory environments. The large Swiss Digit display (11 mm height) improves legibility on the shop floor and reduces interpretation errors during fast-paced measuring routines. Built for standard workshop use with robust protection Classified within the Standard range (max 300 mm), this caliper offers the best compromise between reach and rigidity for everyday applications in machining and metalworking. The IP67 rating ensures reliable operation in dusty or wet conditions, while hand-finished measuring jaws increase contact quality and repeatability for depth probing. These design choices translate into fewer remeasurements, faster setup times and steadier throughput on the production line. Digital workflow compatibility and practical benefits Equipped with wireless data output, the caliper integrates smoothly into digital inspection workflows and reduces manual transcription errors. Traceability is enhanced by the combination of digital logging and the supplied ISO 17025 calibration certificate, which together support compliance and process control. The robust construction and clear display also contribute to user confidence and lower long-term measurement uncertainty, making the instrument a cost-effective tool for standardised quality routines. Choose the Microtech Metrology depth caliper for traceable, workshop-ready precision — contact Metav Werkzeuge in Emmerich for personalised advice and to arrange supply or calibration services at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 1432010304 GTIN: 4061905039034 Manufacturer: Microtech Metrology Display: Swiss Digit, 11 mm height Data output: Wireless Range: 0–300 mm Accuracy: 0.03 mm Protection class: IP67 Calibrated: ISO 17025 calibration with certificate Measuring jaws: hand-finished Facts Resolution (display): 0.01 mm Maximum measuring range: 300 mm Reading height: 11 mm Accuracy: ±0.03 mm Protection rating: IP67 Special features Digital instrument with wireless data transfer ISO 17025 calibration certificate included Hand-finished measuring jaws for improved contact Swiss Digit display for enhanced legibility Classified as Standard range (max 300 mm) FAQ What level of accuracy can be expected from this depth caliper? The caliper achieves an accuracy of ±0.03 mm; combined with its 0.01 mm resolution, it is suitable for standard industrial inspection tasks where this tolerance is required. Is the instrument delivered calibrated and documented? Yes — the depth caliper is supplied fully calibrated to ISO 17025 standards and includes the corresponding calibration certificate for traceability. Can measurement data be exported to quality-control software? The wireless data output allows the instrument to transmit readings directly to compatible data-collection systems, facilitating digital logging and reducing transcription errors. Is the caliper suitable for use in harsh workshop environments? With an IP67 rating and robust construction, the caliper withstands dust and temporary immersion, making it appropriate for demanding shop-floor conditions. Which measuring range does this caliper cover and what category does it fall into? The device covers 0–300 mm and is classified in the Standard range, balancing reach and stiffness for general machine-shop applications. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Depth Caliper E‑Ink Display, IP54, ISO 17025 Calibrated - Microtech Metrology
Taking advantage of ISO 17025 calibration, a high‑contrast E‑Ink readout and a 0–300 mm measuring range ensures reliable depth checks with traceable documentation; order the calibrated depth caliper directly via Metav Werkzeuge or consult our specialists for application advice. Depth caliper — digital with E‑Ink display (Microtech Metrology) The depth caliper is a precision instrument for depth measurement in workshop and quality‑control environments, combining a low‑power E‑Ink display with industrial protection for consistent readings up to 300 mm. E‑Ink display for stable readings Calibrated to ISO 17025, certificate included Measuring range 0–300 mm for standard tasks IP54 dust and splash protection Hand‑finished measuring jaws for durability Precision that fits the workshop workflow The instrument is built for the pragmatic demands of machine shops and inspection benches: a measuring range of 0–300 mm places it in the standard class for everyday mechanical and metalworking tasks, offering a practical balance between reach and rigidity. With a stated accuracy of ±0.025 mm and a display resolution of 0.005 mm, the device supports repeatable depth checks on bores, slots and stepped components, reducing rework and accelerating quality decisions. The result is measurable time savings where throughput and traceability are required. Stable readings and robust handling for reliable output A low‑energy E‑Ink readout provides excellent legibility in varied lighting and reduces display drift during long inspection runs, while the IP54 protection class guards against dust ingress and splashes in busy workshop environments. The measuring faces are hand‑finished, improving contact behaviour and extending service life under frequent use. Together these features mean fewer interrupted measurements and more dependable results during production runs or incoming inspection. Traceable calibration and audit readiness This tool is supplied fully calibrated to ISO 17025, with a calibration certificate included, so documentation for internal audits and customer inspections is ready on delivery. Traceable calibration shortens qualification steps for incoming instruments and supports quality management systems with an auditable measurement chain. For operations that prioritise documented accuracy, the delivered certificate removes a procedural hurdle and speeds instrument deployment. Contact Metav Werkzeuge for tailored advice on integrating this Microtech Metrology depth caliper into inspection routines and to receive the ISO 17025 calibration certificate with your order. Technical Data Article number: 1432010308 GTIN: 4061905455803 Manufacturer: Microtech Metrology Display type: E‑Ink Facts Measuring range: 0–300 mm Readout resolution: 0.005 mm Accuracy: ±0.025 mm Protection class: IP54 Special features Digital depth caliper Hand‑finished measuring jaws ISO 17025 calibration with certificate included Category: Digital calipers (Messschieber Digital) FAQ What measurements is this tool intended for? The depth caliper measures depths of bores, slots and stepped features; the Microtech Metrology depth caliper (SKU 1432010308) is optimised for depth measurement tasks up to 300 mm. Is the device delivered calibrated? Yes — the instrument is delivered calibrated to ISO 17025 and includes a calibration certificate for traceability and audit purposes. What accuracy and resolution can be expected? The depth gauge offers an accuracy of ±0.025 mm with a display resolution of 0.005 mm, providing a high level of repeatability for standard workshop and inspection use. How does the E‑Ink display benefit daily use? The E‑Ink readout on this caliper gives clear, stable readings with low power consumption, improving legibility under different lighting conditions and during extended measurement sessions. Is the instrument suitable for harsh shop environments? With an IP54 rating and hand‑finished measuring faces, the depth caliper withstands dust and splashes typical in production environments while maintaining contact quality. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Depth Caliper Nail Tip, Color 1.54" Touchscreen, Wireless/USB, IP54 - Microtech Metrology
Combine precise 0.025 mm accuracy with a 1.54" colour touchscreen and reliable Wireless + USB data transfer for efficient, repeatable depth measurement; order directly via Metav Werkzeuge or ask our consultants for application advice. Depth Caliper — Colour touchscreen and Wireless + USB connectivity (Microtech Metrology) The Depth Caliper is a digital depth gauge designed for workshop and inspection tasks, offering a robust measuring range suited to general machine‑shop requirements up to 300 mm. 1.54" colour touchscreen display Wireless and USB data output IP54 splash‑resistant protection Precision 0.025 mm for depth readings Accurate depth measurement for routine quality control The instrument delivers reliable depth readings across a measuring range of 0–300 mm, placing it in the Standard category for calipers — a practical compromise between reach and stiffness for general machining work. With a stated accuracy of ±0.025 mm (25 µm), this digital device is suitable for everyday dimensional checks where repeatability and clear numeric readout speed up inspection routines. The caliper’s measured tolerance offers a predictable basis for process control and reduces the need for repeated manual interpretation of scale marks. Time‑saving connectivity and an intuitive display Equipped with a 1.54" colour touchscreen, the instrument combines an easily legible display with touch operation that simplifies zeroing and unit selection. Measurement values can be exported via Wireless + USB, allowing integration into data collection workflows and reducing transcription errors during quality documentation. Wireless transfer supports quick logging where cable routing is impractical, while the USB interface enables direct connection to PCs or data loggers for batch processing of measurement series. Built to withstand workshop conditions and everyday handling With an IP54 rating the depth gauge resists dust ingress and splashing, making it robust enough for production environments without requiring special housing. The device’s mechanical design focuses on stable depth probing and consistent contact geometry, which helps preserve measurement integrity over repeated use. For teams that rely on fast, dependable checks during assembly or setup, the combination of a compact digital interface and protective sealing enhances uptime and lowers the risk of damage-related downtime. Contact Metav Werkzeuge for tailored guidance on Microtech Metrology depth calipers and to arrange prompt supply from our Emmerich facility. Technical data Article number: 1432030307 GTIN: 4061905452642 Manufacturer: Microtech Metrology Facts Measuring range: 0–300 mm Accuracy: ±0.025 mm (25 µm) Display: Colour 1.54" touchscreen Special features Wireless + USB data output IP54 splash‑resistant protection Digital depth gauge format Classified as Standard (measuring range up to 300 mm) FAQ What measuring range does this instrument cover? The Microtech Metrology depth caliper covers a measuring range of 0–300 mm and is classified in the Standard range for calipers, making it suitable for most machine‑shop and inspection tasks. How precise are the depth readings? Depth readings are specified with an accuracy of ±0.025 mm (25 µm), providing repeatable measurements for routine quality control work with the Microtech Metrology depth caliper (SKU 1432030307). How can measurement data be exported? Measurement values can be transferred using the caliper’s Wireless capability or via USB, enabling integration into digital reporting systems and reducing manual data entry. Is the device suitable for workshop use? Yes; the instrument is rated IP54, which protects against dust ingress and splashes, making it well suited to the conditions found in industrial workshops and production areas. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Achieve reliable depth measurement with robust depth calipers
Depth calipers, commonly used for depth measurement and depth gauging, are precision tools designed to determine the depth of blind holes, inner grooves and similar features. These instruments use a slender measuring rod which is inserted into the recess so that the depth can be recorded to the underside of the workpiece with high repeatability.
How depth calipers work and where they belong in the workshop
Primarily constructed from stainless steel, depth calipers resist wear and deformation, ensuring stable accuracy even after prolonged use. The measuring rod is guided by a sled or rail and locked in position to read the distance from the reference face to the deepest point. They are indispensable for checking non-through holes, internal grooves and stepped recesses during machining, assembly and quality control processes.
Clear advantages that improve shopfloor efficiency
- Faster, repeatable checks thanks to a guided measuring rod and clear readout, reducing inspection time and rework.
- Wide selection of measuring ranges and leg lengths — from compact 45 mm legs up to 150 mm legs, and measurement capacities from up to 100 mm up to 300 mm, so the right tool fits each task.
- Choice of analogue or digital models: analogue calipers with vernier offer 0.03–0.08 mm accuracy and battery-free operation; digital models provide 0.01 mm / 0.0005 in resolution and typical accuracy of ±0.03 mm.
- Enhanced functionality on digital variants such as preset start, unit conversion (mm/in), automatic on‑off and models with IP67 protection for use in wet or dusty environments.
- Interchangeable measuring tips (flat, spherical, disc) and specialised hooks or double hooks for grooves increase versatility for complex geometries.
Metav as your precision partner in depth measurement
Metav combines decades of sector expertise with a broad, quality-controlled assortment, acting as a practical single source for precision tools. Based in Emmerich, Metav supplies the european market from a centralised quality filter and has built trust with over 48,000 customers. With more than 250,000 products available, Metav simplifies procurement and helps reduce supplier complexity while ensuring consistent availability.
In short: dependable tools for exact depth measurement
Depth calipers and depth measurement tools offer a straightforward, durable solution for precise depth checks across production and maintenance environments, delivering reliable readings and adaptable functionality for diverse workshop demands.
FAQ
What is the difference between analogue and digital depth calipers?
Analogue depth calipers use a vernier and typically achieve 0.03–0.08 mm accuracy without batteries, making them robust for harsh conditions. Digital depth calipers offer 0.01 mm / 0.0005 in resolution, easy unit switching and extras such as preset functions and automatic on‑off, with typical accuracy of ±0.03 mm.
Can depth calipers be used in wet or dusty environments?
Yes. Some digital depth calipers are rated IP67, providing dust-tight and temporary immersion protection so measurements remain reliable under adverse shopfloor conditions.
Which measuring range should I choose for blind hole inspection?
Select a depth caliper with a measuring range that exceeds the maximum blind hole depth you need to check; compact models suit depths up to 100 mm, while larger calipers cover ranges up to 300 mm. Also consider measuring leg length — common options include 45 mm to 150 mm — to ensure accessibility and stability during measurement.
Are there specialised tips for measuring uneven or grooved surfaces?
Yes. Depth calipers can be fitted with flat, spherical or disc‑shaped tips, and there are designs with single or double hooks or a round depth rail specifically for grooves, enabling accurate contact with irregular or recessed features.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com