Accurate depth measurement for precision metalworking
Depth measurement tools such as depth gauges and depth callipers are designed to determine the exact depth of blind holes, internal grooves and similar features, providing machinists with reliable results for quality control and fitting tasks. Made from stainless steel or rust‑resistant steel, these gauges ensure durability and long‑term stability while maintaining measurement accuracy across repeated use. Available in analogue and digital variants, users can choose robust vernier instruments or digital models with a 0.01 mm resolution and features like unit switching, preset functions and IP67 protection for harsh environments. With interchangeable probes, hook or double‑hook tips and varying stem lengths and measuring ranges, depth gauges adapt to applications from shallow grooves to deep bores, improving process repeatability and assembly precision.
300mm Depth Caliper Straight Bar 12x4mm Matt Chrome Nonius Laser-Engraved - Mahr GmbH HELIOS-PREISSER
Benefit from precise, repeatable depth measurement thanks to the combination of a 300 mm range and a rigid straight measuring beam. Order the instrument directly via Metav Werkzeuge or consult our specialists for procurement and verification advice. Tiefenmessschieber DIN 862 300mm ger.Schiene 12x4mm H.PREISSER — Depth caliper with 300 mm range and 12 x 4 mm straight beam The Tiefenmessschieber DIN 862 300 mm is a precision depth caliper designed for workshop and inspection use, offering a rigid straight measuring beam and a matt‑chrome vernier and scale for durable, legible readings 300 mm measuring range Straight 12 x 4 mm measuring beam Matt‑chrome vernier and scale Laser‑etched high‑precision graduation Precise depth measurement for critical inspection tasks The instrument follows DIN 862, providing a 300 mm measuring range that supports a wide variety of depth measurements in production and quality control. The vernier-equipped design delivers high precision readings, while the laser-etched graduation ensures long-lasting legibility and minimal wear under regular use. For metrology and inspection departments, the combination of standard compliance and durable marking reduces measurement uncertainty and supports traceable record keeping. Durable beam construction for repeatable results A straight 12 x 4 mm measuring beam gives the caliper the required stiffness to resist bending during contact measurements, improving repeatability on repetitive tasks. The integrated locking screw secures the slider for stable readings during transfer or marking operations, and the matt‑chrome surface of vernier and scale reduces glare to aid interpretation under workshop lighting. These design choices minimise rework and accelerate inspection cycles by offering reliable, reproducible results. Readable scale and vernier for faster decision making The matt finish combined with laser-etched markings maintains contrast and sharpness over time, so scale divisions remain clear even after extended use. The vernier (Nonius) provides an additional subdivision for fine readings without reliance on electronics, making the tool robust in harsh environments. As the caliper is subject to inspection, regular verification preserves measurement integrity and supports quality documentation in line with internal or regulatory requirements. Built for workshop efficiency and confidence in results By delivering straightforward depth measurement with low maintenance requirements, the gauge streamlines routine checks and reduces process interruptions. The combination of mechanical reliability and clear graduation supports fast acceptance testing and in‑process controls. Metav Werkzeuge brings procurement competence and a broad range of metrology solutions to complement this tool, enabling centralised sourcing and consistent quality across the workshop floor. For assured precision and supply, request specification sheets or procurement advice from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss delivery and verification options Technical Data Article number: 4000851186NW Product type: Depth caliper (Tiefenmessschieber) Standard: DIN 862 Measuring range: 300 mm Core data Measuring range: 300 mm Measuring beam cross‑section: 12 x 4 mm A: 12 mm B: 4 mm C: 4 mm Packaging unit: 1 Inspection required: yes Special features Straight measuring beam Locking screw Matt‑chrome vernier and scale Laser‑etched graduation Verification/inspection required FAQ What measuring range does this depth caliper cover? The depth caliper covers a 300 mm measuring range and is designed in accordance with DIN 862 for standardised depth measurements. Is the scale durable for workshop environments? Yes, the matt‑chrome vernier and laser‑etched graduation on the caliper provide long‑lasting contrast and wear resistance suitable for routine workshop use. What is the benefit of the 12 x 4 mm beam cross‑section? The 12 x 4 mm straight beam increases stiffness and reduces deflection during measurement, improving repeatability for serial checks and in‑process inspection. Does the tool require regular verification? The caliper is marked as inspection required; periodic verification is recommended to maintain traceability and ensure measurement accuracy over time. Which SKU identifies this model for ordering and documentation? This model is listed under SKU 4000851186NW, referenced as a depth caliper conforming to DIN 862 for procurement and documentation purposes. Manufacturer / Responsible: Mahr GmbH Helios-Preisser Vertrieb; Ölbergstraße 19; 72501 Gammertingen; Germany; +49 7574 400-60
300mm Depth Caliper Swiss Digit Display IP67, 0.01mm Resolution, Calibrated Certificate - Microtech Metrology
Take advantage of the combination of robust environmental protection, clear Swiss Digit readability and workshop-grade measurement accuracy for reliable depth checks across production and inspection tasks. Order the instrument directly via Metav Werkzeuge or consult their specialists for application advice. Digital Depth Caliper — Microtech Metrology; IP67, 0–300 mm The Digital Depth Caliper is a precision depth-measuring instrument for workshop and quality‑control applications, designed to deliver repeatable measurements on machine parts and assemblies. IP67 protection for harsh environments Swiss Digit 11 mm high-contrast display 0–300 mm range with 0.01 mm readout Precise depth readings that support production decisions The caliper offers a 0–300 mm measuring span with a reading resolution of 0.01 mm and an accuracy of ±0.03 mm, enabling confident decisions during incoming inspection and in-process checks. The fine resolution reduces interpretation errors compared with coarser instruments, while the documented accuracy helps classify tolerances and reduce scrap rates. This makes the tool particularly suitable for routine dimensional control where small deviations affect assembly fit or function. Robust construction for demanding workshop environments With IP67 protection, the instrument resists dust ingress and brief immersion, so measurement capability is maintained at the machine bench even where coolant mist or metal swarf is present. The Swiss Digit display, with an 11 mm character height, ensures readings remain legible under varied lighting and angles, cutting measurement time and reducing transcription mistakes. The sealed electronics and rugged slider design translate into fewer service interruptions and longer periods between maintenance. Streamlined inspection workflow and practical benefits Classified within the Standard range (100–300 mm) of calipers, the instrument balances reach and stiffness for typical machine‑shop work. The clear digital readout speeds checks compared with non-digital alternatives and simplifies documentation of results. For shops introducing digital measurement into routine quality control, the instrument provides an immediate uplift in process reliability without the complexity of larger metrology systems. For dependable depth measurement in production and inspection, choose the Microtech Metrology digital depth caliper and contact Metav Werkzeuge in Emmerich for tailored advice, delivery details or to discuss suitability for specific applications. Technical data SKU: 1432030303 GTIN: 4061905459801 Manufacturer: Microtech Metrology Category: Digital depth caliper Display: Swiss Digit, 11 mm character height Protection class: IP 67 Facts Measuring range: 0–300 mm Resolution (reading): 0.01 mm Accuracy: ±0.03 mm Digital: yes Special features Standard range classification: Standard (100–300 mm) Robust slider and sealed electronics Suitable for workshop and quality‑control use FAQ What measurement range does the caliper cover? The Microtech Metrology digital depth caliper covers a measuring range of 0–300 mm (SKU 1432030303), suitable for most general workshop and machine‑shop depth checks. What resolution and accuracy can be expected? The instrument provides a resolution of 0.01 mm and an accuracy of ±0.03 mm, making it suitable for standard dimensional control tasks in production and inspection. Is the device resistant to coolant and dust? Yes. The caliper is rated IP67, offering dust-tight construction and protection against temporary immersion, so it performs reliably at the machine bench. How readable is the display under workshop lighting? The caliper is fitted with a Swiss Digit display featuring 11 mm-high characters for high‑contrast legibility, reducing read errors and speeding measurements. Is this caliper suitable for routine quality control in a small shop? Absolutely. The balance of 0–300 mm reach, fine 0.01 mm resolution and robust protection suits small to medium workshops seeking reliable, fast depth measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Depth Digital Caliper Double Hook, 0.001mm Resolution, IP54, USB Output - Microtech Metrology
Combining USB data output, IP54 protection and ±0.03 mm repeatability, this digital depth instrument delivers reproducible depth measurement across the standard 0–300 mm workshop range. Order the digital depth caliper directly via Metav Werkzeuge or ask our consultants if needed. Digital Depth Caliper — Microtech Metrology, USB, 0–300 mm The Digital Depth Caliper is a precision depth gauge for inspection and workshop measurement, designed for standard 0–300 mm tasks with a clear digital readout. USB data output for traceable logging IP54 protection for workshop environments 0–300 mm range for standard workshop tasks ±0.03 mm accuracy for reliable control Precise, repeatable depth measurement that fits the workshop The depth gauge is configured for standard workshop applications with a 0–300 mm measuring range, placing it squarely in the universal workshop class where reach and stiffness are balanced for everyday use. With a display resolution of 0.001 mm and an indicated accuracy of ±0.03 mm, the instrument supports reliable decision-making in quality control and routine inspections. The high-resolution readout reduces interpolation errors common to analog instruments and ensures that recorded values remain comparable across shifts and operators. Traceable data capture to speed up quality routines Equipped with USB output, the caliper removes manual transcription and simplifies data logging for inspection protocols. The 13 mm display offers high legibility to speed readings and reduce operator error during repetitive tasks. Exported files can be integrated into common quality-management software or spreadsheets, supporting statistical process control and audit documentation. This capability enhances throughput by shortening inspection cycles and by providing a direct data path from measurement to documentation. Built for workshop conditions with clear handling benefits The instrument’s IP54 rating gives reliable protection against dust ingress and splashing liquids, making it suitable for production-floor environments. The digital readout and compact depth beam allow straightforward positioning in confined spaces where visual access is limited. The overall design prioritises fast, repeatable operation so that the focus remains on measurement quality rather than instrument handling. For buyers seeking dependable, documented depth measurement, this digital device from Microtech Metrology combines workshop toughness with the data features needed for modern quality workflows. Choose Microtech Metrology’s digital depth caliper for reliable, logged depth measurement — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for specialist purchasing advice and rapid supply. Technical Data Article number: 1432020302 GTIN: 4061905456275 Brand: Microtech Metrology Digital: yes Data output: USB Protection class: IP 54 Display height: 13 mm Facts Measuring range: 0–300 mm Resolution: 0.001 mm Accuracy: ±0.03 mm Display height: 13 mm Special features Digital depth caliper design USB data output for traceable logs IP54 splash and dust resistance FAQ How accurate is the depth measurement? The digital depth caliper achieves an indicated accuracy of ±0.03 mm with a resolution of 0.001 mm, making it suitable for routine inspection and workshop control. Which measurement tasks is this instrument intended for? This depth gauge is designed primarily for depth and step measurements within the standard workshop range of 0–300 mm. Can measurement values be exported for documentation? Yes, measurements can be exported via the USB data output for integration into inspection records and quality-management systems. Is the instrument suitable for use on the shop floor? With an IP54 protection rating, the caliper is resistant to dust and splashes and is therefore suited to industrial workshop environments. What is the product reference for ordering or spare parts? The product is listed under article number 1432020302 and is supplied by Microtech Metrology. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Depth Digital Caliper Double Hook, Swiss Digit Display 11mm, IP67 - Microtech Metrology
Take advantage of robust IP67 protection, a high-contrast Swiss Digit display and a fine 0.001 mm reading to secure reproducible depth measurements across the workshop; order the depth caliper directly via Metav Werkzeuge or contact our consultants for application-specific advice. Depth Caliper — Digital depth caliper with Swiss Digit display and IP67 protection (Microtech Metrology) Depth Caliper for fast, reliable depth measurement in machine shops and inspection bays with a clear Swiss Digit display and durable enclosure Swiss Digit 11 mm display IP67 dust and water protection Precise 0–300 mm measuring range Resolution 0.001 mm reading High-resolution measurement for demanding shop-floor tasks The instrument delivers a 0.001 mm reading, making it suitable where fine depth distinctions matter. With a measuring span of 0–300 mm, the tool fits the standard caliper class used across general engineering and metalworking. The combination of a fine digital readout and a robust construction reduces repeat-measurement scatter, supporting faster decision-making on the production line. The clear Swiss Digit display (11 mm high digits) speeds reading and reduces transcription errors during inspection rounds, while the stable digital electronics allow quick capture of values for process control. Durable design that withstands industrial environments Engineered for frequent use, the caliper is rated IP67, which protects internal electronics against dust ingress and short-term immersion. This level of protection extends service intervals and minimises downtime caused by contaminants or coolant mist common in machining cells. The sealed digital unit and rugged slider ensure consistent performance in mixed environments, from bench inspection to on‑machine checks, and support long-term reliability under routine shop stresses. Practical handling and integration for everyday use Ergonomic balance and a concise display layout allow rapid depth measurements on workpieces, gauges and toolsetups. As a dedicated depth instrument, it simplifies tasks that otherwise require improvised fixtures or repeated manual checks. The device suits maintenance, quality control and in-process verification tasks where traceable, repeatable depth data are required. For procurement and inventory planning, listing the product as a digital depth caliper ensures compatibility with workshop tooling lists and inspection procedures. For tailored advice and reliable supply of this Microtech Metrology depth caliper (SKU 1432020303), contact Metav Werkzeuge in Emmerich for local stock information and technical guidance. Technical data Article number: 1432020303 GTIN: 4061905456299 Manufacturer: Microtech Metrology Category: Digital caliper IP protection: IP67 Display: Swiss Digit, 11 mm Digital: yes Facts Measuring range: 0–300 mm Resolution / reading: 0.001 mm Display height: 11 mm eClass: 21170344 Special features Swiss Digit display IP67 dust and water protection Digital depth caliper for workshop use Standard range classification: Standard (max 100–300 mm) FAQ What measuring range does the depth caliper cover? The Microtech Metrology depth caliper covers a 0–300 mm measuring range (SKU 1432020303), matching standard workshop requirements for components and fixtures. What is the smallest increment readable on the display? The instrument provides a 0.001 mm reading resolution via the Swiss Digit display, enabling fine depth discrimination for inspection tasks. Is the caliper suitable for damp or dusty environments? Yes — the caliper is rated IP67, which protects against dust ingress and temporary immersion, making it suitable for many shop-floor conditions. Which display does the device use and how readable is it? The unit features a Swiss Digit display with 11 mm high digits for improved legibility during fast inspection cycles. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Depth Digital Caliper With Double Hook, Swiss Digit Display 11mm, IP67 Wireless - Microtech Metrology
Combine high-resolution measurement (0.001 mm) with wireless data transfer and IP67 protection to keep inspection workflows efficient and reliable. Order the depth caliper directly via Metav Werkzeuge or contact our consultants for tailored advice. Depth Caliper — Digital, Wireless Output, IP67 (Microtech Metrology) The Depth Caliper is a digital depth-measuring instrument for workshop and inspection use, offering a 0–300 mm measuring range and robust wireless data output. Digital display Swiss Digit 11 mm Wireless data transfer for traceability IP67 protection for wet environments Range 0–300 mm for standard workshop tasks Faster inspections with laboratory-grade resolution This depth-measuring instrument combines a 0–300 mm measuring range with a fine 0.001 mm resolution to accelerate routine checks while keeping measurement uncertainty low. The exceptionally small display increment makes subtle deviations visible at a glance, reducing rework and inspection time. With wireless data output, measured values are transferred without manual transcription, which reduces human error and speeds up documentation for production control or quality records. Built to withstand workshop conditions Designed for standard workshop applications, the caliper sits in the Standard class (measuring range up to 300 mm), which balances reach and rigidity for everyday machine‑shop tasks. The IP67 rating means the sliding sections and electronics are protected against dust ingress and short immersion in water, so the instrument tolerates coolant splashes and cleaning routines. This durability preserves measurement stability and lowers the frequency of unplanned replacements in harsh environments. Clear readout and straightforward data handling The unit features a Swiss Digit display with an 11 mm digit height for rapid legibility in dimly lit benches and on busy production floors. Combined with the wireless interface, the caliper supports digital workflows by enabling direct transfer to inspection software or data loggers, cutting administrative steps between measurement and evaluation. The intuitive digital readout simplifies training for operators while maintaining traceable measurement chains. Practical confidence from a reputable maker and supplier Manufactured by Microtech Metrology, the instrument matches industry expectations for repeatability and component quality, making it suitable for assembly shops, toolrooms and quality departments. Supplied through Metav’s European distribution, customers benefit from a reliable stock and a clear procurement channel that supports consistent quality across workshops and smaller industrial operations. Contact Metav Werkzeuge today for technical advice and secure this Microtech depth caliper with wireless output and IP67 protection for your inspection setup Technical Data Article number: 1432020304 GTIN: 4061905456312 Manufacturer: Microtech Metrology Facts Measuring range: 0–300 mm Resolution: 0.001 mm Display height: 11 mm Protection class: IP 67 Special features Digital display: Swiss Digit Data output: Wireless Category: Digital depth caliper Application: Depth measurement for workshop and inspection FAQ What measuring range does the depth caliper cover? The depth caliper has a measuring range of 0–300 mm, making it a Standard‑class caliper suitable for general workshop and machine‑shop tasks. What resolution and accuracy can be expected from this digital caliper? The instrument provides a resolution of 0.001 mm, allowing for fine detection of dimensional deviations during inspection routines. How is measurement data transferred from the caliper? Measurement values are transmitted via the device’s wireless data output for direct integration into inspection software or data collection systems. Is the caliper suitable for use in damp or coolant-prone environments? Yes, the caliper is rated IP67, which protects against dust ingress and temporary immersion, making it robust for shop‑floor conditions. Who manufactures the caliper and where does it ship from? The caliper is manufactured by Microtech Metrology and is supplied via Metav Werkzeuge to ensure consistent availability and distribution across Europe. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Depth Gauge 0.02mm Stainless Steel, DIN 862, Supplied in Case - Metav IndustryLine
Combine 0.02 mm resolution with a robust stainless steel build and DIN 862 conformity for dependable, repeatable depth measurement in everyday workshop and inspection tasks. Order the depth gauge directly via Metav Werkzeuge or ask our consultants if needed. Depth gauge M204.042 — Analogue vernier depth gauge, 0–300 mm, 0.02 mm (Metav IndustryLine) Depth gauge M204.042 is an analogue depth measuring instrument for routine workshop and inspection tasks up to 300 mm, designed to deliver precise readings in accordance with DIN 862. Analogue vernier with 0.02 mm resolution Measuring range 0–300 mm for workshop use Stainless steel body, matt chrome scale and vernier Fine locking screw for repeatable readings Supplied in a protective case for transport Dependable precision for standard workshop requirements An analogue vernier calibrated to 0.02 mm (nonius 1/50 mm) provides a high level of mechanical accuracy suitable for fine metrology tasks. The instrument adheres to DIN 862, which sets clear expectations for dimensional gauges in industrial environments. With a measuring span of 0–300 mm, this tool sits in the standard caliper class — the preferred balance of reach and stiffness for most machining and metal‑working operations. The mechanical design avoids reliance on batteries, offering long‑term stability and straightforward maintenance while delivering repeatable depth readings. Built materials and handling that suit daily use Constructed from stainless steel with the scale and vernier matt chrome‑plated, the gauge withstands regular workshop exposure while remaining easy to read. A dedicated locking screw secures the slide for reproducible measurements and safe transport. The instrument is supplied in a protective case, ensuring safe storage and transport between job sites or on the shop floor. A 150 mm base/bridge provides a stable reference for depth measurement and supports consistent alignment against workpieces. Simple operation with a precise mechanical readout The vernier layout, specified as 1/50 mm, allows fast visual determination of the result: align the zero and read the vernier line that coincides with the main scale for the 0.02 mm increment. Compared with digital alternatives, the mechanical readout reduces susceptibility to electronic faults and offers immediate, intuitive readings for experienced operators. Proper handling — measured contact, clean reference faces and light, consistent seating of the base — ensures the mechanical precision is translated into reliable measurement data for quality control tasks. Practical applications and workshop fit This depth gauge is ideal for machine shops, toolrooms and metal‑fabrication plants where depth measurements must be robust and repeatable. As part of the standard 0–300 mm instrument set, it complements micrometres and callipers, covering tasks such as recess depth checks, slot depths and fixture set‑up. The combination of DIN 862 compliance, corrosion‑resistant materials and a secure locking mechanism supports efficient inspection routines and reduces rework caused by inconsistent measurement practice. The instrument is supplied as SKU M204.042 by Metav IndustryLine, reflecting a focus on accessible, durable metrology for everyday industrial use. Speak with Metav Werkzeuge for specification advice and supply from our Emmerich hub — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M204.042 GTIN: 4054469164014 Brand: Metav IndustryLine Standard: DIN 862 EClass: 21170349 Numbers / Core technical data Measuring range: 0–300 mm Resolution: 0.02 mm (nonius 1/50 mm) Bridge / base length: 150 mm Analogue instrument Materials / Special features Material: stainless steel Scale and vernier: matt chrome‑plated Locking screw included Supplied in protective case Category: depth gauge / caliper FAQ How precise is the depth measurement with this instrument? The depth gauge M204.042 offers a mechanical resolution of 0.02 mm (nonius 1/50 mm) and meets DIN 862, delivering high repeatability suitable for precise workshop and inspection tasks. Is the instrument suitable for harsh workshop environments? The M204.042 uses stainless steel with a matt chrome scale and vernier and is supplied in a protective case, which together improve resistance to typical workshop wear and help preserve measurement integrity. Can this tool be used for measurements other than depth? This model is designed specifically as a depth gauge; its geometry and scale are optimised for depth measurement rather than external diameter or internal bore checks. How is the vernier read and what does 1/50 mm mean? Read the main scale first, then add the vernier line that aligns with the main scale; 1/50 mm denotes the vernier subdivision that yields 0.02 mm increments for precise manual readings. Does the instrument include a calibration certificate? The standard delivery does not include an ISO 17025 certificate; any specific calibration requirements should be verified at the point of order or through the product listing. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Depth Gauge 0.05mm Nonius Stainless Steel, DIN 862, Supplied in Case - Metav IndustryLine
Take advantage of precise, workshop-ready depth measurement with a stainless-steel construction and a vernier resolution of 0.05 mm for reliable part set-up and inspection; order directly via Metav Werkzeuge or consult the technical advisors for specification matching and delivery from Emmerich. Depth Gauge M204.050 — 300 mm range, 0.05 mm vernier, Metav IndustryLine A Depth Gauge M204.050 for accurate depth measurement in machine and metal workshops, designed to the requirements of DIN 862 and built for repeatable, corrosion-resistant use. 300 mm measuring range, standard workshop length 0.05 mm vernier resolution DIN 862 Stainless steel construction with matt chrome scale Locking screw for repeatable depth readings Industrial precision for everyday workshop measurement The analogue depth gauge is engineered as a practical metrology tool for routine depth checks and setting operations. With a 300 mm measuring range it falls into the workshop standard category, offering an optimum balance of reach and rigidity for common tasks such as checking bore depths, shoulder positions and component recesses. The integrated vernier provides a 0.05 mm reading step in accordance with DIN 862, which corresponds to the industrial standard for mechanical gauges; this makes the instrument suitable for general machine‑shop quality control where dependable repeatability and clear visual reading are required. Durable materials and a stable measuring base for reproducible results Constructed from stainless steel with the scale and vernier matt chrome finished, the gauge resists workshop wear and reduces reflective glare under bright lighting. A 100 mm bridge supplies a stable foot for depth support, improving contact consistency across the measuring surface and reducing measurement scatter. The inclusion of a locking screw secures the slider once the reference is set, enabling rapid, repeatable transfers of the same depth to multiple workpieces or fixtures and thus speeding up inspection cycles while maintaining traceability of results. Clear analogue operation that supports efficient workflows As a manually read instrument with a conventional vernier, the tool combines straight‑forward operation with minimal setup time: the vernier scale gives immediate visual feedback without battery dependence, while the simple mechanical design supports long service life and easy maintenance. The gauge is supplied in a protective transport case to preserve calibration and finish during storage and shipment. Its compliance with recognised workshop standards makes it a practical choice for production lines, jigs and fixture inspection where robustness and uncomplicated handling take priority over electronic features. For durable, DIN 862‑compliant depth measurement choose Metav IndustryLine’s Depth Gauge M204.050 — contact Metav Werkzeuge for procurement assistance and prompt delivery from Emmerich Technical Data SKU: M204.050 GTIN: 4054469102559 Category: Messschieber Norm: DIN 862 Facts Measuring range: 300 mm Bridge/base: 100 mm Resolution/vernier: 0.05 mm (1/20 mm) Analogue/vernier instrument Special features Material: stainless steel Scale and vernier: matt chrome plated Locking screw for slider fixation Supplied in transport case FAQ What measuring range does this depth gauge cover? The depth gauge covers a 300 mm measuring range and is classified as a standard workshop instrument suitable for general machine and metalworking tasks; the Depth Gauge M204.050 provides this reach with robust support. What reading accuracy can be expected from the gauge? The instrument uses a vernier with a reading step of 0.05 mm in line with DIN 862, representing the typical industrial mechanical resolution for this class of analogue gauge. Is the gauge suitable for use in corrosive workshop environments? Yes, the construction in stainless steel and the matt chrome scale reduce corrosion and surface wear, improving longevity for the Depth Gauge M204.050 in demanding shop conditions. Does the product include any fastening or repeat‑measurement aids? A locking screw is included to secure the slider after setting, which enables repeatable depth transfers and consistent inspection routines without drift. How is the depth gauge delivered and protected during transport? The instrument is supplied in a protective transport case to safeguard the finish and measuring surfaces during storage and shipment. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Depth Gauge 0.05mm Vernier Stainless Steel Matt Chrome Scale, DIN 862, Box - Metav IndustryLine
Take advantage of the combination of stainless steel construction, DIN 862 conformity and a 0.05 mm vernier for dependable workshop depth measurement; order the depth gauge directly via Metav Werkzeuge or consult our technical advisors for specification support. Depth Gauge 300 x 150 mm (0.05 mm, stainless, DIN 862) – Metav IndustryLine The Depth Gauge 300 x 150 mm is a DIN 862 depth gauge designed for precise workshop and mechanical measurements, offering a lower vernier with 0.05 mm resolution for straightforward analogue readings Stainless steel construction for corrosion resistance 0.05 mm vernier resolution for clear readings DIN 862 standard for traceable comparability Locking screw for stable measurement settings Reliable accuracy for everyday workshop control This depth gauge provides 0.05 mm resolution via a lower vernier, giving a simple mechanical reading that is both fast and reliable for routine checks. Constructed from stainless steel, the instrument resists workshop contaminants and maintains dimensional stability over repeated use. Conformity to DIN 862 ensures the results can be compared against industry standards; this reduces guesswork during tolerance checks and supports consistent production decisions. The analogue format requires no batteries and excels where quick, repeatable depth checks are needed before, during and after machining operations. Practical handling that speeds inspection routines Featuring a 0–300 mm measuring range with a 150 mm bridge, this gauge belongs to the standard range of calipers suited to general machine‑shop and metalworking tasks. The moderate span balances reach and rigidity, enabling single‑hand operation for frequent spot checks. A secure locking screw fixes the slider once the measurement is taken, preventing readjustment while marking or recording values. The simple mechanical operation shortens inspection time and minimises stoppages caused by uncertainty, contributing to steadier throughput on the shop floor. Robust finish and protected transport The scale and vernier are matt‑chrome plated for glare‑reduced reading and improved wear resistance, while the stainless‑steel body tolerates the knocks of daily workshop use. Delivery includes a protective case suitable for transport, which keeps the gauge shielded between uses and on site. This practical packaging helps preserve calibration and prolongs service life, so the tool remains a reliable part of the inspection kit rather than a consumable item. Fits into quality workflows with minimal overhead As an analogue depth gauge designed to DIN 862, the instrument integrates smoothly into established quality procedures and documentation schemes. The direct mechanical readout supports rapid decision‑making during process control, reducing rework and scrap by catching deviations early. For specialized requirements or integration into a broader measuring set, Metav IndustryLine instruments offer consistent form and function that simplify procurement and inventory management. Choose the Metav IndustryLine depth gauge for dependable DIN 862 measurement; contact Metav Werkzeuge in Emmerich for technical clarification or to request an individual quotation Technical Data SKU: M204.051 GTIN: 4054469102573 Designation: Depth gauge 300 x 150 mm Standard: DIN 862 Type: Analogue depth gauge (vernier) Core data Measuring range: 0–300 mm Bridge length: 150 mm Resolution: 0.05 mm (vernier 1/20 mm) Tariff number: 90173000 Special features Material: stainless steel; scale and vernier matt chrome‑plated Locking screw for slider fixation Delivered in protective case for transport and storage Analogue vernier positioned on the lower scale for clear reading FAQ Is this gauge suitable for general machine‑shop work? Yes. The depth gauge is a standard‑range instrument (0–300 mm) designed for everyday machine‑shop and metalworking inspection tasks and follows DIN 862. What resolution and reading method does the gauge use? The instrument uses a lower vernier with a 0.05 mm resolution, providing direct analogue readings without electrical components. Does the delivery include protective packaging? A protective case is included with the depth gauge to safeguard the instrument during transport and between uses. Can the slider be locked to hold a measurement? Yes. A locking screw secures the slider, enabling stable measurement transfer and marking without drift. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Depth Gauge Caliper Digital Color Touchscreen Wireless USB IP54 - Microtech Metrology
Take advantage of the combination of precise measurement capability, flexible data transfer and robust protection for reliable workshop results; order the instrument directly via Metav Werkzeuge or ask the Metav consultants for additional technical advice. Depth Caliper — Digital depth caliper, 0–300 mm, 1.54" colour touchscreen (Microtech Metrology) Depth Caliper — a digital depth-measuring caliper designed for standard workshop and quality-control applications, offering reliable data transfer and robust IP54 protection for intermittent dusty or damp environments. Digital depth caliper, 0–300 mm range 1.54" colour touchscreen display Wireless and USB data output IP54 protection for workshop use Precision and dependable measurement for routine inspection The Depth Caliper combines a clear 1.54" colour touchscreen with a finely tuned measurement system to deliver repeatable depth readings across the 0–300 mm span. With a stated accuracy of 0.025 mm and a reading increment of 0.005 mm, the instrument suits standard machine‑shop tolerances and component inspection tasks. The digital display simplifies reading and reduces interpretation errors compared with analogue scales, while the device’s digital interface supports efficient downstream documentation. Efficient data capture and process integration Equipped with Wireless + USB data output, the caliper supports fast transfer of measured values into inspection protocols and spreadsheets, reducing manual entry and associated errors. The combination of onboard display and external data channels enables both standalone checks and integration into digital quality workflows; this makes the instrument suitable for workshop benches and small-series production lines where traceable data capture speeds up throughput and auditability. Durable design for everyday workshop conditions Built to IP54 standards, the measuring device resists dust ingress and water splashes commonly encountered on the shop floor, extending service life and ensuring consistent operation. The construction balances handling convenience with the rigidity required for depth measurement in the standard range (0–300 mm), offering a dependable tool for general metalworking, assembly jigs and fixture checks. The manufacturer’s reputation further supports sustained use in industrial settings. For tailored advice on integrating this Microtech Metrology depth caliper into existing inspection routines, contact Metav Werkzeuge—local expertise and workshop-proven parts supply from Emmerich are available to assist with specifications and procurement. Technical Data Article number: 1432020307 GTIN: 4061905456329 Manufacturer: Microtech Metrology Facts Measurement range: 0–300 mm Reading increment: 0.005 mm Accuracy: 0.025 mm Display: Colour 1.54" touchscreen Data output: Wireless + USB Protection class: IP54 Digital instrument: yes Special features Standard workshop class caliper (0–300 mm) Colour touchscreen interface Wireless data transmission option USB data connection FAQ What measurement range does the caliper cover? The caliper offers a measurement range of 0–300 mm, classifying it in the standard workshop category suitable for routine machine‑shop and assembly measurements. What accuracy and resolution can be expected from this instrument? The instrument provides an accuracy of 0.025 mm with a reading increment of 0.005 mm, which meets typical quality‑control needs for standard components. How can measurement values be exported? Measurement values can be transferred via Wireless connection or USB, allowing quick documentation and integration into inspection records. Is the instrument protected against dust and coolant splashes? Yes; the caliper is rated IP54, offering resistance to dust ingress and water splashes common in workshop environments. Who manufactures this caliper and where can further product details be obtained? The caliper is produced by Microtech Metrology; further technical details can be provided by Metav Werkzeuge for application advice and procurement. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Depth Gauge Caliper Digital Wireless Swiss Digit Display IP67 - Microtech Metrology
A robust, workshop-ready solution that pairs IP67 protection with wireless data transfer and a clear Swiss Digit display for dependable depth measurement; benefit from reliable readings and seamless digital capture. Order the depth caliper directly via Metav Werkzeuge or ask our consultants if needed. Depth caliper — wireless digital instrument, IP67 protection (Microtech Metrology) The Depth caliper is a wireless digital measuring instrument for reliable depth measurements in machine shops and production environments up to 300 mm. Wireless data output for traceable measurements IP67 protection against dust and water ingress Swiss Digit display 11 mm for clear readings Accuracy ±0.03 mm, resolution 0.01 mm Precise measurements that reduce rework and downtime The instrument delivers a measuring range of 0–300 mm, placing it in the Standard class for workshop and machine‑shop use where reach and stiffness must be balanced. With a display resolution of 0.01 mm and an stated accuracy of ±0.03 mm, the device supports routine quality checks and dimensional control across common production tasks. The Swiss Digit display (11 mm digit height) improves read‑off speed and reduces interpretation errors; this combination of resolution, accuracy and legibility helps to avoid rework and maintain throughput in repetitive measurement cycles. Built to withstand shop conditions while simplifying data capture Designed for industrial conditions, the instrument carries an IP67 rating, which protects against dust ingress and temporary immersion in water — a practical advantage on busy shop floors. The Wireless data output enables direct capture of measurement values into data logging or SPC systems, reducing manual transcription and the associated risk of errors. These features support faster inspection routines and seamless integration into digital quality processes, contributing to consistent documentation and traceability of measurement results. Integration into daily workflows and the Metav advantage As a compact digital depth gauge, the tool is well suited to repetitive depth checks and fixture verifications in toolrooms and assembly. Its Standard measuring range offers the best compromise between reach and rigidity for general metalworking tasks, while the robust housing and clear display focus on uptime and operator efficiency. Supplied by Microtech Metrology through Metav Werkzeuge, the instrument benefits from Metav’s European supply and quality‑filtering approach: dependable availability, broad product ranges and specialist support tailored to industry requirements. For supply and integration advice from Metav Werkzeuge — ask about system compatibility and delivery from our Emmerich location Technical data Article number: 1432030304 GTIN: 4061905459887 Brand: Microtech Metrology Type: Digital depth caliper Facts Measuring range: 0–300 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Display height: 11 mm Protection rating: IP67 Special features Wireless data output Swiss Digit digital display Digital instrument Category: Standard (100–300 mm) class Measuring function: Depth measurement FAQ What measuring range does the caliper cover? The depth caliper covers a range of 0–300 mm, categorising it as a Standard class instrument suitable for common workshop and machine‑shop tasks. What resolution and accuracy are specified? Resolution is 0.01 mm and accuracy is ±0.03 mm, with a Swiss Digit display (11 mm) for clear read‑off on the Microtech Metrology depth caliper (SKU 1432030304). Is the instrument suitable for use on the shop floor? Yes — the IP67 rating provides protection against dust and temporary immersion, making the instrument appropriate for industrial workshop environments. How are measurement values transferred? Values are sent via the wireless data output, enabling direct capture into data logging, SPC or inspection software for traceable records. What measurement function does this tool perform? The instrument is designed specifically for depth measurement as a digital depth caliper, focusing on precise and repeatable depth checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Depth Gauge Digital 0.01mm Resolution IP54 ISO 17025 Calibrated Data USB - Microtech Metrology
Take advantage of ISO 17025 traceable calibration, USB data output and robust IP54 protection to keep depth measurements precise and reliably documented; order directly via Metav Werkzeuge or contact our consultants for specification checks. Depth Caliper by Microtech Metrology — digital depth gauge with USB and ISO 17025 calibration The Depth Caliper is a digital measuring instrument for depth measurements up to 300 mm, designed for workshop metrology and routine quality-control tasks where traceable results and rugged handling are required. ISO 17025 calibrated with certificate USB data output for traceable records IP54 protection against dust and splashes Handcrafted measuring jaws for sustained accuracy Traceable precision for everyday quality control This digital instrument combines a workshop-friendly measuring range with laboratory-grade verification: ISO 17025 calibration is supplied with the delivery, which guarantees a traceable calibration certificate and reduces uncertainty in acceptance testing. With a stated accuracy of 0.03 mm and a readout resolution of 0.01 mm, the caliper supports standard-machine shop tolerances and routine inspection tasks. Classified as a standard caliper (measuring range to 300 mm), it offers the best compromise between reach and stiffness for common components such as housings, shafts and fixtures. Fast data capture and robust construction for the production floor Equipped with a USB data interface and a clear digital display (height 13 mm), this digital depth gauge enables straightforward data transfer to inspection software or spreadsheets, speeding up documentation and reducing transcription errors. The IP54 rating provides protection against dust and splashing liquids, making the instrument suitable for busy workshop environments rather than only controlled labs. Handcrafted measuring jaws improve contact geometry and wear behaviour, maintaining measurement repeatability over extended use. Practical benefits that reduce cycle time and documentation effort The instrument supports an efficient inspection workflow by combining a durable mechanical design with digital convenience: fast readouts and direct data export lower administrative overhead, while the delivered ISO 17025 certificate simplifies audit preparation and supplier acceptance. The robust construction and protective rating also mean fewer replacements and less downtime, which translates into measurable savings in throughput and quality assurance time. For everyday metrology tasks, this depth gauge offers a balance of reliability, traceability and ease of integration into existing quality procedures. For calibrated, traceable depth measurement and reliable data output, contact Metav Werkzeuge in Emmerich to arrange procurement or technical clarification via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 1432010302 GTIN: 4061905039133 eClass: 21170344 Core specifications Measuring range: 0–300 mm Accuracy: 0.03 mm Readout resolution: 0.01 mm Display height: 13 mm Protection class: IP54 Data output: USB Features Digital caliper for depth measurement ISO 17025 calibration certificate included Handcrafted measuring jaws Robust workshop protection rating Category: Digital calipers FAQ Is a calibration certificate included with the instrument? Yes. The depth caliper is delivered fully calibrated and includes an ISO 17025 calibration certificate. Can measurement data be exported directly to inspection software? Yes. The caliper provides a USB data output for direct transfer of measured values to a computer or data-collection system. What environments is the caliper suited to? The IP54 rating makes the tool suitable for workshop floors where dust and occasional splashes occur; it is not intended for continuous immersion. What tolerance range is the caliper designed to inspect? With an accuracy of 0.03 mm and a resolution of 0.01 mm, the instrument is appropriate for standard machine-shop and quality-control tolerances. Are the measuring faces durable and precise over time? The caliper features handcrafted measuring jaws that provide stable contact geometry and improved wear resistance for prolonged repeatability. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Depth Gauge Digital 150mm Blade, Stainless Steel Body, 0.01mm Resolution, DIN 862, Supplied in Case - Metav IndustryLine
Precise depth measurement meets workshop robustness: the hardened stainless steel construction, DIN 862 conformity and a 0.01 mm digital readout ensure repeatable results for quality control and assembly checks. Order the (Digital depth gauge M218.026.N) directly via (Metav Werkzeuge) or ask our consultants if needed. Digital depth gauge M218.026.N — 300 mm range, hardened stainless steel housing (Metav IndustryLine) The Digital depth gauge M218.026.N is a compact, DIN‑862 depth gauge designed for workshop inspection and general mechanical measuring tasks, offering a standard 300 mm measuring range with a long 150 mm probe for deeper recesses. DIN 862 compliant depth gauge Resolution 0.01 mm, inch 0.0005 display Hardened stainless steel housing and probe ON/OFF, ZERO, UNIT and HOLD functions Measure deeper components with repeatable precision The instrument provides a 300 mm measuring range that places it in the Standard class for workshop and machine‑tool inspection. The 0.01 mm resolution ensures measurements that meet common quality control tolerances, while the long probe (150 mm) allows access to deeper bores and recesses without sacrificing rigidity. This combination reduces rework and inspection time and supports consistent parts acceptance across batches. Built to withstand everyday shop conditions A hardened stainless steel construction and a protective metal housing increase resistance to knocks and contamination typical in production environments. Conformity with DIN 862 documents the gauge’s intended metrological behaviour, making it suitable for routine checks on jigs, fixtures and machined components. A robust build contributes to long service life and stable measurement results over time. Faster reading and traceability for process control The clear digital readout includes ON/OFF, ZERO, UNIT and HOLD functions for straightforward operation and faster measuring cycles. Inch mode is available with a displayed resolution of 0.0005 in, enabling mixed‑unit workflows. The device also offers an RB 5 data output for downstream logging or SPC integration where applicable, supporting productivity and traceability in serial inspection routines. Practical handling that reduces operator error Thoughtful ergonomics and a precisely ground probe minimise the influence of handling on results; readable digits and a HOLD function make measurement transfer easier. The power is provided via a 3 V supply compatible with standard workshop batteries, ensuring ready availability of spares and low downtime. Together, these aspects simplify everyday use and help maintain measurement reliability. Choose Metav IndustryLine's M218.026.N for dependable depth measurement and contact Metav Werkzeuge for product guidance or to arrange supply direct from Emmerich. Technical data SKU: M218.026.N GTIN: 4054469160092 ECLASS: 21170349 Specifications Measuring range: 0–300 mm Resolution: 0.01 mm / 0.0005 in Probe length: 150 mm Weight: 1.16 kg Power: 3 V Data output: RB 5 Standard: DIN 862 Features and materials Material: hardened stainless steel, metal housing Display functions: ON/OFF, ZERO, UNIT, HOLD Application: workshop inspection, machine shop measuring FAQ What measuring range does this depth gauge cover? The depth gauge covers a measuring range of 0–300 mm, making it suitable for standard workshop and machine‑tool inspection tasks. What resolution and display modes are available? The instrument offers a resolution of 0.01 mm and an inch mode with 0.0005 in resolution; the display includes ON/OFF, ZERO, UNIT and HOLD functions. Is the construction suitable for industrial workshops? Yes. The hardened stainless steel construction and metal housing provide robustness for everyday workshop use and inspection routines. Does the device provide a data interface for logging? The depth gauge provides an RB 5 data output for connection to logging or SPC systems where integration is required. How long is the probe and what applications does that support? The probe length is 150 mm, which allows measurement of deeper bores and recesses commonly encountered in fixtures and assemblies. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Depth Gauge Digital Inductive Display mm/inch 0.01mm Resolution IP67 Plastic Case - Metav IndustryLine
Take advantage of a robust, workshop-ready digital depth caliper that pairs an inductive measuring system with IP67 protection for reliable results in daily production and inspection. The hardened stainless steel construction and DIN 862 conformity ensure long service life and traceable measurement practice — order the instrument directly via Metav Werkzeuge or ask the consultants for assistance. M218.122 Depth Caliper — Digital depth gauge, 300 mm, IP67 (Metav IndustryLine) The M218.122 Depth Caliper is a digital depth gauge designed for workshop and machine‑shop quality control, offering a 0–300 mm measuring range and a sealed enclosure for use in demanding production environments. IP67 dust and water protection Inductive measuring system for stable readings Hardened stainless steel construction Digital mm/inch display with 0.01 mm resolution Consistent accuracy that speeds up inspection routines The instrument provides a 0.01 mm resolution on a clear digital readout, reducing interpretation time and helping to avoid rework. The inductive measuring system minimises mechanical play and contact variability, which translates into fewer measurement errors and faster quality checks on the shop floor. Conformity with DIN 862 gives a standardised baseline for internal procedures and documentation, enabling comparability across batches and suppliers while supporting efficient process control. Built to withstand workshop conditions and heavy use A hardened stainless steel frame resists wear and maintains jaw geometry over time, so reproducibility is preserved even under frequent handling. The sealed construction rated IP67 protects the electronics from coolant, chips and dust, lowering downtime for maintenance. Supplied in a protective transport case, the gauge stays safe during storage and transfer between workstations — a practical detail that supports uninterrupted measurement workflows in production or maintenance settings. Practical design for everyday metrology and traceability With a 300 mm measuring range the tool fits the Standard caliper category, balancing reach and rigidity for common machine‑shop tasks such as checking bores, recess depths and component seats. The digital display toggles between mm/inch, simplifying cross‑standard checks and documentation. Lightweight at approximately 0.6 kg, the device is easy to position for repetitive depth measurements while providing the stability required for reliable results. For robust depth measurement in production and inspection, choose the Metav IndustryLine M218.122 and contact Metav Werkzeuge in Emmerich for personalised advice and rapid supply — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: M218.122 GTIN: 4054469146188 Manufacturer: Metav IndustryLine Measuring range: 0–300 mm Resolution (display): 0.01 mm / 0.0005 in Weight: 0.6 kg Protection rating: IP67 Material: hardened stainless steel Measuring system: inductive Display: digital with mm/inch and 0/ON/OFF button Standard: DIN 862 Tariff number: 90173000 FAQ What measuring tasks is this depth caliper best suited for? This depth caliper is optimised for standard workshop tasks such as depth checks on bores, recesses and seats up to 300 mm, offering a practical balance between reach and stiffness. How does the inductive measuring system improve results? The inductive measuring system reduces mechanical play and stabilises the signal, so readings from the M218.122 are less affected by operator contact forces and repeat more reliably. Is the caliper protected against coolant and dust? Yes, the device is rated IP67, which protects the electronics from dust ingress and temporary immersion, making it suitable for harsher production environments. Can measurements be read in inches as well as millimetres? The digital readout switches between mm/inch, enabling straightforward checks and documentation for mixed‑unit workflows. Does the device comply with recognised measurement standards? The instrument is compliant with DIN 862, providing a consistent basis for workshop metrology and internal quality procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Depth Gauge Digital Swiss Digit Display IP67, Calibrated to ISO 17025 - Microtech Metrology
Take advantage of precise depth measurement, robust IP67 protection and a factory-issued ISO 17025 calibration certificate for reliable quality control. Combine the clear Swiss Digit readout and hand‑finished measuring jaws to reduce rework and speed up inspection. Order directly via Metav Werkzeuge or consult the specialists for integration advice. Depth caliper (digital) – Swiss Digit display, IP67 – Microtech Metrology The Depth Caliper is a digital instrument designed for accurate depth measurement in standard workshop and inspection tasks across mechanical and metalworking environments. Digital Swiss Digit display, 11 mm height Calibrated to ISO 17025 with certificate IP67 dust‑ and water‑resistant Precision ±0.03 mm for standard workshop use Consistent measurement accuracy for everyday quality control The instrument delivers an assured ±0.03 mm accuracy with a 0.01 mm reading step, providing a balance between sensitivity and robustness that suits shop‑floor and inspection‑bench routines. The combination of clear numeric resolution and defined error bounds means fewer ambiguous readings and a lower rate of corrective work. Because the device is classified in the standard measuring range of 0–300 mm, it covers the typical span needed for components, housings and fixturing elements without sacrificing stiffness or handling. Built to withstand industrial conditions and frequent use Sealing to IP67 protects the electronics from dust ingress and temporary immersion, reducing downtime from contamination or coolant exposure. The display uses a Swiss Digit module with an 11 mm character height for fast reading under workshop lighting. The caliper’s hand‑finished measuring jaws ensure true contact geometry and repeatability across many cycles; the finished surfaces reduce the risk of scoring delicate parts while maintaining long service life. This robust construction supports reliable measurements in harsher production environments. Traceability and integration into quality processes Delivered fully calibrated under ISO 17025, the tool arrives with a traceable calibration certificate suitable for incorporation into formal quality systems. This calibration step documents measurement uncertainty and supports audits and quality records without additional in‑house calibration. The device’s digital output and standardised labelling simplify documentation in inspection reports and allow straightforward comparison with other instruments supplied via Metav’s quality filter for the European market. For procurement or traceable calibration of this Microtech Metrology depth caliper (SKU 1432010303), contact Metav Werkzeuge in Emmerich for personalised advice and delivery arrangements: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 1432010303 GTIN: 4061905039027 Manufacturer: Microtech Metrology Type: Digital depth caliper Display: Swiss Digit, height 11 mm Protection class: IP 67 Accuracy: ±0.03 mm Measuring range: 0–300 mm Facts Resolution: 0.01 mm Display height: 11 mm Measuring range: 0–300 mm Accuracy: 0.03 mm eClass: 21170344 Special features Hand‑finished measuring jaws IP67 sealed electronics Delivered calibrated to ISO 17025 with certificate Digital interface: Swiss Digit display SKU: 1432010303 FAQ What measurement accuracy can be expected from this instrument? The depth caliper from Microtech Metrology provides an accuracy of ±0.03 mm, with a display resolution of 0.01 mm, making it suitable for standard workshop inspection and metalworking tasks. Is the caliper supplied with a calibration certificate? Yes, the instrument is delivered calibrated under ISO 17025 and comes with a calibration certificate for traceability and inclusion in quality documentation. Can the caliper be used in wet or dusty environments? The device is rated IP67, so the sealed electronics withstand dust ingress and temporary immersion, supporting use in machining areas with coolant or residual particulate. What measuring range does the instrument cover and which applications suit it best? The caliper covers 0–300 mm, the standard workshop range, and is ideal for component depth checks, housing inspections and general metalworking measurement tasks. Are the measuring faces suitable for repeated contact with machine parts? Yes, the unit features hand‑finished measuring jaws, offering durable contact geometry and repeatable results across frequent use. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Depth Gauge With 100mm Angle Attachment And Measuring Anvil, DIN 862, Chrome Finish - Metav IndustryLine
Take advantage of a DIN 862‑compliant depth gauge that pairs robust construction with fine mechanical resolution; the matt‑chrome scale and 1/50 mm nonius (0.02 mm) resolution deliver repeatable readings for routine shop tasks. Order the depth gauge directly via Metav Werkzeuge or consult the Metav team for application advice. Depth gauge with angled base M204.045 — 300 mm measuring range, DIN 862 (Metav IndustryLine) A depth gauge with an angled base designed for reliable depth and step measurements in metalworking and general workshop applications Measuring range up to 300 mm Nonius resolution 0.02 mm for fine readings Compliant with DIN 862 measurement standard Special steel construction with matt‑chrome scale finish Consistent workshop measurements with measurable benefits The instrument is built for everyday metrology tasks where reproducible results matter. With a measuring span of 0–300 mm, this unit sits in the Standard (100–300 mm) class, which provides the best compromise between reach and stiffness for general machine‑ and metalwork. The mechanical vernier (lower nonius, 1/50 mm) produces an effective reading step of 0.02 mm, enabling clear distinction of small depth differences without electronics. This reduces downtime for routine checks and supports quality control routines that depend on stable, traceable results. Robust materials and finishing for long service life The main profile is manufactured from special steel, while scale and vernier are matt‑chrome plated to resist glare and surface wear during repeated use. Such surface treatment improves legibility in workshop lighting and slows corrosion on sliding faces, which in turn keeps measurement uncertainty low over many cycles. The angled base and included measuring foot provide a firm seating on both flat and recessed components, helping to avoid tilt‑related errors and ensuring that each depth measurement starts from a known, stable datum. Simple to read, simple to integrate into workflows This mechanical depth gauge follows the familiar vernier principle described in DIN 862, so operators accustomed to analogue calipers will recognise the reading technique immediately. The lower nonius configuration supports rapid, one‑hand operation while maintaining high visibility of the scale. For shops preferring a low‑maintenance, battery‑free tool, the analogue design combines tactile feedback with proven robustness—ideal where routine checks and process control demand dependable instruments without electronic dependencies. Contact Metav Werkzeuge for a specification match or application recommendation — Metav’s consultants provide technical guidance and swift supply from Emmerich Technical Data Article number: M204.045 GTIN: 4054469102504 ECLASS: 21170349 Category: Caliper (depth gauge type) SKU: M204.045 Facts Measuring range: 0–300 mm Bridge/overhang: 100 mm Weight: 0.53 kg Resolution (nonius): 1/50 mm (0.02 mm) Customs tariff number: 90173000 Special features Material: Special steel Scale and nonius: Matt‑chrome plated Standard: DIN 862 compliant Design: Depth gauge with angled base and measuring foot Drive: Analogue vernier system FAQ What measurement range does the instrument cover? The depth gauge M204.045 covers a measuring range of 0–300 mm, making it suitable for standard workshop and machine‑shop tasks. How fine are the readings and what does the nonius mean? Readability is achieved with a lower nonius of 1/50 mm, equivalent to 0.02 mm; the vernier allows direct analogue reading to this step size without electronics. Is the tool appropriate for daily shop use? Yes; classified in the Standard (100–300 mm) bracket, the gauge balances reach and stiffness, so it is well suited for everyday inspections in metalworking and general fabrication. Which materials and surface finish are used for longevity? The main profile is made from special steel with scale and vernier matt‑chrome plated, enhancing wear resistance and legibility under workshop conditions. How should the instrument be cared for to preserve accuracy? Keep sliding faces clean and lightly oiled after use, store flat and protected from heavy loads, and handle the vernier surfaces with care to maintain the repeatability of readings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Depth Gauge With Double Hook Removable Rod 0.05mm Nonius DIN 862, Supplied In Case - Metav IndustryLine
Take advantage of precise depth measurement, robust stainless-steel construction and an adjustable double hook that increases versatility for workshop tasks; the combination supports reliable production control and straightforward handling. Order the depth gauge directly via Metav Werkzeuge or ask our consultants if technical advice is needed. Depth Gauge M204.075 — Adjustable double-hook depth gauge, 300 mm (Metav IndustryLine) A Depth Gauge M204.075 designed for standard-range workshop use, offering clear mechanical readings and flexible hook positioning for grooves, bores and stepped surfaces. Adjustable double hook for flexible depth measurement Resolution 0.05 mm vernier for clear readings Stainless steel construction, matt chrome scale Delivered in protective plastic/wooden case Precision and durability for repetitive workshop measurement The M204.075 is a mechanical depth gauge built to provide reliable depth control in metalworking and general workshop environments. The instrument uses a vernier calibrated at 0.05 mm (1/20 mm), which delivers readable graduations for routine quality checks and setup tasks. Constructed from stainless steel with a matt chrome scale, the gauge resists corrosion and abrasion, so dimensional references remain legible over frequent use. Compliance with DIN 862 ensures the tool meets recognised standards for vernier measuring instruments, supporting consistent results across production batches. Clear operation and adaptable measurement geometry The design centres on an adjustable double hook, allowing the measuring rod to be repositioned for different depth scenarios — from shallow grooves to deeper recesses. The mechanical vernier offers direct, battery-free operation and simple interpretation: every division on the vernier corresponds to 0.05 mm, making fast cross-checks and set-ups straightforward without electronic dependency. Classified as a standard-range instrument (measuring up to 300 mm), it balances reach and stiffness, which is advantageous for frequent one-handed checks on machine components and assemblies. Practical use cases and workshop integration Typical applications include depth checks of slots, recesses and drilled holes as well as comparative measurements during fixture assembly. The combination of stainless steel construction and a matt chrome scale provides low reflectivity and durable marking under workshop lighting. Delivery in a protective case (plastic or wooden) simplifies transport between workstations and offers basic protection during storage. For workshop managers seeking a robust mechanical solution that complements digital instruments, this gauge delivers repeatable readings with minimal maintenance. Contact Metav Werkzeuge for tailored advice and to secure the M204.075 depth gauge for the workshop. Technical Data Article number: M204.075 GTIN: 4054469102726 SKU: M204.075 Reference standard: DIN 862 Facts Measurement range: 0–300 mm Resolution: 0.05 mm (1/20 mm vernier) Tariff code: 90173000 Type: Analog vernier depth gauge Special features Material: stainless steel; scale and vernier matt chrome-plated Adjustable double hook for versatile depth measurement Delivered in protective plastic/wooden case Suitable for workshop and machine‑shop use FAQ How precise is the depth reading with this gauge? The depth readings are provided by a mechanical vernier with a resolution of 0.05 mm (1/20 mm), allowing the M204.075 to perform standard workshop measurements with clear graduations. Which standard does the instrument conform to? The instrument is supplied in accordance with DIN 862, ensuring it meets recognised requirements for vernier measuring equipment used in machine and metalworking. Is the depth gauge suitable for measurements in a production environment? Yes. The M204.075 is a standard-range depth gauge up to 300 mm, designed for reliable repetitive checks in production and workshop settings. Does the delivery include a protective case? The depth gauge is supplied in a protective plastic or wooden case to simplify transport between workstations and to provide basic storage protection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Depth Gauge With Dual Offset Measuring Rails, Locking Screw, Matt Chromed Scale - Mahr GmbH HELIOS-PREISSER
Benefit from precise depth, width and spacing measurement thanks to the double‑division, reversible measuring beam and the laser‑engraved vernier scale; the robust 8 x 3 mm rail and locking screw ensure consistent readings in workshop use. Order directly via Metav Werkzeuge or consult our specialists for application advice. Depth Caliper 300 mm — reversible double‑division measuring beam (Helios‑Preisser) The Depth Caliper 300 mm is a handheld precision instrument for depth, width and spacing measurement in workshops and inspection tasks, featuring a reversible measuring beam and a matt chrome vernier for durable, high‑contrast readings Reversible double‑division measuring beam Laser‑engraved high‑precision scale Matt chrome finish with vernier Locking screw for secure readings Reliable, repeatable depth and spacing control for production The design focuses on repeatability: a laser‑engraved scale and a finely graduated vernier provide unambiguous readings, while the dual‑division, reversible measuring beam allows measurement orientation to be adapted to the task. This configuration reduces interpretation error and shortens inspection time, which supports faster decision cycles in production environments and quality control. The instrument thus contributes to consistent part acceptance rates and traceable measurement records. Robust construction for everyday workshop demands A compact measuring beam with an 8 x 3 mm cross‑section combines rigidity with low profile access into narrow features. The matt chrome finish enhances contrast and wear resistance, while the integrated locking screw secures the slider during transfer or repetitive checks. Together these elements reduce the risk of movement‑related deviation and extend the instrument’s service life under regular workshop handling. Practical integration and conformity for inspection routines Designed for width, distance and depth measurement, the tool is marked as inspection required, so it can be integrated into established calibration cycles and documented quality procedures. The reversible beam aids measurement versatility across a range of geometries, while the precise division by laser marking simplifies readout training for staff with varying inspection experience. The result is a straightforward tool for both rapid checks and formal inspection steps. For reliable depth and spacing control choose the Helios‑Preisser depth caliper and contact Metav Werkzeuge for ordering or detailed application guidance — Metav Werkzeuge can provide specialist advice and dispatch from Emmerich to your workshop. Technical Data Article number: 4000851192NW Product: Depth caliper 300 mm Manufacturer: Mahr GmbH HELIOS‑PREISSER Packaging unit: 1 Core measurements Measuring range: 300 mm Measuring beam cross‑section: 8 x 3 mm Inspection required: yes Special features Reversible double‑division measuring beam Depth, width and distance measurement capability Vernier and matt chrome scale Division and scaling by laser engraving Locking screw for secure measurements FAQ How large is the measuring range of the depth caliper? The depth caliper offers a measuring range of 300 mm, suitable for a wide variety of workshop and inspection tasks. Is the scale on the caliper durable and easy to read? Yes, the scale and vernier are laser‑engraved and finished in matt chrome to ensure durable, high‑contrast readings. Can the measuring beam be used in different orientations? The instrument features a reversible, double‑division measuring beam so the measuring orientation can be adapted to the application. Does the caliper require periodic inspection or calibration? The tool is marked as inspection required, so it should be included in regular calibration and quality assurance cycles. Which workshop measurements is this instrument suited for? It is designed for precise depth, width and spacing measurements, making it suitable for general workshop use, quality control and inspection processes. Manufacturer / Responsible: Mahr GmbH Helios‑Preisser Vertrieb; Ölbergstraße 19; 72501 Gammertingen; Germany; +49 7574 400-60
300mm Depth Gauge With Fine Adjustment, Stainless Steel Matt Chrome Scale, DIN 862, In Case - Metav IndustryLine
Combine proven DIN 862 conformity, stainless-steel construction and a precise fine-adjustment vernier (0.02 mm) to ensure dependable depth measurements in everyday workshop and machine‑shop tasks. Order the depth gauge directly via Metav Werkzeuge or consult our specialists for technical advice. Depth Gauge M204.087 – 300 mm range, fine‑adjustment, stainless steel (Metav IndustryLine) A precision Depth Gauge M204.087 engineered for standard machine‑shop depth measurements up to 300 mm, complying with DIN 862 and equipped with a bottom vernier and fine‑adjustment for repeatable results Stainless-steel construction for corrosion resistance DIN 862 standard for traceable measurements Fine-adjustment vernier, 0.02 mm resolution Matt-chromed scale and vernier for clear reading Reliable results for routine depth measurements The analogue design with a bottom vernier delivers 0.02 mm reading steps, positioning this instrument at the upper end of mechanical precision. Built to the DIN 862 specification, the gauge provides a verifiable, industry‑recognised baseline for routine inspection and shop‑floor controls. Its 300 mm measuring range covers the standard workshop requirements where reach and stiffness must be balanced to keep results reproducible. Fine adjustment and vernier handling that reduces measurement uncertainty A dedicated fine‑adjustment mechanism simplifies incremental positioning and prevents over‑travel while the bottom vernier (1/50 mm) enables close readings without electronics. The analogue arrangement means measurements are not dependent on batteries or electronics, which supports uninterrupted operation during production shifts. The vernier principle and the fine feed together reduce operator‑induced variation and aid consistent setting of depth stops. Robust materials and finish for everyday workshop use Constructed from stainless steel with a matt‑chromed scale and vernier, the instrument resists corrosion and maintains legibility under workshop conditions. The compact, rigid design favours standard machine and metalworking tasks where a sturdy depth gauge is required. Thanks to its mechanical simplicity and solid finish, the tool is suited to repeated use in fixtures, jigs and on component inspection benches without elaborate maintenance. Contact Metav Werkzeuge for procurement and technical guidance on the Metav IndustryLine Depth Gauge M204.087 and secure consistent depth measurement performance for the workshop. Technical data Article number: M204.087 Brand: Metav IndustryLine GTIN: 4054469102764 Standard: DIN 862 ECLASS: 21170349 Tariff code: 90173000 Facts Measuring range: 0–300 mm Blade length: 150 mm Resolution: 0.02 mm (1/50 mm vernier) Type: Analogue vernier depth gauge Special features Material: stainless steel Scale and vernier: matt chrome finish Fine adjustment: integrated for precise setting Vernier position: lower (bottom) vernier for depth readings FAQ What measuring range does the gauge cover? The depth gauge covers a measuring range of 0–300 mm, matching standard workshop requirements for general machine and metalworking tasks. What resolution and reading increment are provided? The analogue vernier provides a 0.02 mm reading increment (1/50 mm), offering mechanical precision suitable for high‑accuracy shop measurements. Is the instrument suitable for continuous shop use? Yes—the stainless‑steel construction, matt‑chromed scale and mechanical fine adjustment make the instrument resilient for daily workshop and machine‑shop use. Does the instrument meet recognised metrology standards? The tool is produced to DIN 862, ensuring compatibility with established workshop measurement practices and traceable workmanship. What special handling features are included? A fine‑adjustment mechanism is integrated to facilitate precise depth setting and to reduce operator‑induced variation during repeat measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Depth Gauge With Fine Adjustment, Stainless Steel Matt Chrome Scale, DIN 862, Supplied In Case - Metav IndustryLine
Take advantage of a robust combination of precision, corrosion resistance, and a fine-adjustment screw to ensure repeatable depth measurements in everyday workshop use. Order the depth gauge directly via Metav Werkzeuge or ask the consultants if needed. Depth Gauge M204.085 — Analogue depth gauge, 0–300 mm, stainless steel (Metav IndustryLine) A Depth Gauge M204.085 designed for reliable depth measurement in machine shops and general metalworking, offering a 0–300 mm range and conformity with DIN 862. Precise analogue scale with 0.05 mm resolution Corrosion-resistant stainless steel construction Fine-adjustment screw for controlled positioning Conforms to DIN 862 workshop standard Built for dependable workshop measurement The instrument is aimed at standard workshop tasks where a balance of reach and stiffness matters. Classified as a standard measuring instrument (measuring range up to 300 mm), it is sized to cover the most common machine‑shop requirements while remaining easy to handle. The use of stainless steel for the body and a matt‑chrome finish on the scale and vernier reduces reflection and increases resistance to routine workshop environments. Compliance with DIN 862 gives a recognised reference frame for quality control and ensures the gauge integrates seamlessly into established inspection processes. Accuracy and controlled operation for repeatable results The vernier is graduated as 1/20 mm, corresponding to a reading step of 0.05 mm, which supports precise, reproducible depth readings for production and inspection work. A dedicated fine-adjustment screw allows measured, micro‑movements of the sliding member so the contact point can be positioned without overshoot — particularly useful where careful seating of the depth probe is critical. The analoge vernier arrangement delivers straightforward, maintenance‑free operation and avoids battery dependence while still achieving workshop‑grade accuracy. Practical durability and ergonomic handling Constructed from corrosion‑resistant stainless steel and finished with a matt chrome scale and vernier, the tool resists everyday wear and maintains legibility over time. At approximately 0.36 kg it offers enough mass to sit steadily during measurement without being unwieldy for single‑person handling. The compact bridge dimension supports firm seating against reference faces while the overall construction balances stiffness and reach — an advantage for routine checks on housings, platework and machined components. Integration into quality workflows Designed with machinists and toolroom technicians in mind, the gauge complements calipers and micrometres as part of a coherent inspection kit. Clear vernier reading and the fine‑adjustment feature speed up repetitive measurement tasks and reduce handling variability. For questions about fitment into existing inspection procedures or for assistance with technical specifications, Metav’s consultants can provide further guidance and data sheets to support purchase decisions. Choose the Metav IndustryLine depth gauge for consistent, workshop‑grade depth control — contact Metav Werkzeuge for tailored advice and supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M204.085 GTIN: 4054469102740 Manufacturer: Metav IndustryLine Numbers / Core technical data Measuring range: 0–300 mm Bridge length: 150 mm Resolution (vernier): 0.05 mm Weight: 0.36 kg Standard: DIN 862 Tariff number: 90173000 ECLASS: 21170349 Special features Analogue depth gauge (vernier) Nonius: 1/20 mm (bottom reading) Material: corrosion‑resistant stainless steel Scale and vernier matt‑chrome plated Fine‑adjustment screw for controlled positioning FAQ How accurate is the depth reading on this gauge? The Depth Gauge M204.085 provides a vernier resolution of 0.05 mm (1/20 mm), suitable for standard workshop measurements and routine quality checks. Is the gauge suitable for machine‑shop use and compliance checks? Yes, the device conforms to DIN 862 and is intended for typical machine‑shop and metalworking inspection tasks. What material is the depth gauge made from? The body is manufactured from corrosion‑resistant stainless steel; the scale and vernier are matt‑chrome plated to improve durability and legibility. Does the instrument include a fine‑adjustment mechanism? The depth gauge is equipped with a fine‑adjustment screw to permit controlled positioning of the sliding member for repeatable measurements. What is the product SKU and how can it be referenced in orders? Order references use SKU M204.085 and the product is listed under Metav IndustryLine as an analogue depth gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Depth Gauge With Pin Tip 0.05mm Nonius, Stainless Steel, DIN 862, Supplied In Case - Metav IndustryLine
Take advantage of the combination of 0.05 mm vernier precision, robust stainless steel construction and clear DIN 862 traceability for reliable depth control in everyday workshop and production checks. Order the depth gauge directly via Metav Werkzeuge or consult our specialists for application advice. Depth gauge with pin tip M204.062 — 300 mm, 0.05 mm vernier (Metav IndustryLine) The Depth gauge with pin tip M204.062 is a standard‑range analogue depth instrument for precise depth, step and bore measurements in metalworking and general workshop inspection. Stainless steel, matt‑chrome scale and vernier 0.05 mm vernier resolution (1/20 mm) DIN 862 standard for depth gauges Pin tip for narrow recess and bore depths Precise depth measurement that speeds quality checks This analogue depth instrument delivers reproducible results thanks to its 0.05 mm vernier (noted as 1/20 mm on the scale) and adherence to DIN 862, which together support consistent quality control across repeated measurements. The mechanical vernier avoids battery dependence and provides an immediate tactile feedback that many technicians prefer for quick inspection loops. Classified within the Standard range (0–300 mm), the gauge combines useful reach with manageable stiffness, making it suited to routine tasks in machine shops where both throughput and documented accuracy matter. The instrument’s design reduces measurement uncertainty by keeping the measuring stem aligned when probing recesses and steps, so checks are faster and less prone to operator error. Robust construction for everyday workshop use Manufactured from stainless steel with the scale and vernier matt‑chrome plated, the instrument withstands regular workshop conditions while remaining easy to read. The pin tip is shaped for access to narrow bores and deep recesses, enabling precise contact even where flat probes would be obstructed. As an analogue depth gauge, it offers straightforward handling: no electronics to calibrate on the bench and a low maintenance profile that suits busy production environments. The combination of corrosion resistance and a smooth sliding action ensures long service life and stable repeatability for routine inspection tasks. Integrates into shopfloor and inspection workflows Designed for operations that require quick verifications of bore depths, step heights and recessed features, this depth instrument fits seamlessly into established inspection routines. Its DIN 862 conformity means results are comparable across tools and shifts, supporting traceable reporting and supplier communication. The compact, manual format also complements digital measuring equipment by providing a fast, robust alternative for bench work and on‑machine checks. Where documentation is required, readings from the vernier serve as a reliable baseline for pass/fail criteria or subsequent digital recording steps. For purchase or detailed application advice on the M204.062, contact Metav Werkzeuge — Metav IndustryLine product specialists are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to recommend the optimal measurement solution for specific workshop needs. Technical Data Article number: M204.062 GTIN: 4054469164038 Norm: DIN 862 Product type: Analogue depth gauge Manufacturer: Metav IndustryLine Facts Measuring range: 0–300 mm Resolution: 0.05 mm (1/20 mm) Bridge: 100 ECLASS: 21170349 Customs tariff number: 90173000 Special features Stainless steel construction Scale and vernier matt‑chrome plated Analogue vernier (lower position) Pin tip for narrow bores and recesses FAQ Is the gauge suitable for routine workshop depth checks? The M204.062 depth gauge (analogue, Metav IndustryLine, SKU M204.062) is intended for routine workshop and machine‑shop depth checks within its 0–300 mm range and offers industry‑standard precision. What resolution and tolerance can be expected from this instrument? This instrument provides a vernier resolution of 0.05 mm (1/20 mm); as an analogue device it meets the typical industrial expectation for mechanical verniers according to DIN 862. Can the pin tip access small bores and recessed features? Yes, the pin tip on this depth gauge is designed specifically for narrow recesses and bore depths where flat probes are impractical. Is calibration included with delivery? The product complies with DIN 862; any specific calibration certificates are noted only when provided. Standard delivery does not automatically imply ISO 17025 calibration unless explicitly stated for the article. What materials is the gauge made from and how does that affect durability? The gauge is manufactured from stainless steel with a matt‑chrome finish on the scale and vernier, giving resistance to corrosion and wear for dependable workshop performance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Depth Gauge With Pointed Probe 0.02mm Nonius, Stainless Steel, DIN 862, Supplied In Case - Metav IndustryLine
Take advantage of precise mechanical measurement, robust stainless construction and a compact protective case for consistent depth checks across workshop and inspection tasks — order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Depth gauge with pin tip M204.072 — analog depth gauge, 0.02 mm vernier (Metav IndustryLine) The Depth gauge with pin tip M204.072 is an analog depth measuring instrument designed for precise depth and recess measurements in machining, toolmaking and quality control applications. 0.02 mm vernier for fine mechanical precision Stainless steel body for corrosion resistance DIN 862 compliant vernier scale Supplied in a protective transport case Consistent, workshop-grade precision that reduces rework The analogue vernier on this instrument delivers a resolution of 0.02 mm (1/50 mm), placing it among the finer mechanical calipers for workshop use. This level of resolution supports repeatable depth measurements and helps to reduce rework by catching dimensional deviations early in the process. Conforming to DIN 862 ensures that scale layout and measurement procedure follow recognised standards, which simplifies integration into existing quality routines and documentation. Durable build for everyday industrial handling Constructed from stainless steel, with the scale and vernier matt‑chrome plated, the gauge withstands the demands of machine shops and production floors while remaining straightforward to maintain. The pin tip probe is engineered for access into narrow recesses and stepped features, offering practical reach without sacrificing rigidity. The compact form factor and robust materials combine to provide a reliable measuring tool that retains calibration under normal workshop conditions. Practical features to speed up routine measurement tasks With a 0–300 mm measuring range the instrument falls into the Standard class for calipers, offering the ideal balance between reach and stiffness for general metalworking and fixture inspection. Supplied in a protective case for safe transport and storage, the device is ready for immediate use on the bench. The analogue layout makes readings quick and independent of batteries, favouring uninterrupted use during shift operations and in environments where digital displays may be impractical. Request technical advice or a quotation from Metav Werkzeuge for the Metav IndustryLine depth gauge M204.072 — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: M204.072 GTIN: 4054469164069 Standard: DIN 862 Type: Analog depth gauge Material: Stainless steel; scale and vernier matt‑chrome plated Delivery: Protective case for transport Core technical data Measuring range: 0–300 mm Vernier resolution: 0.02 mm (1/50 mm) Bridge / probe length: 100 mm Tariff number: 90173000 ECLASS: 21170349 Special features Analogue operation (vernier/nonius) Pin probe tip for narrow recesses DIN 862 compliance Supplied in plastic or wooden case for transport Robust stainless steel construction FAQ What measuring range does this depth instrument cover? The Metav IndustryLine depth gauge M204.072 covers a measuring range of 0–300 mm, placing it in the Standard class for calipers suitable for general machine‑shop and inspection work. How fine is the vernier reading on this gauge? This analogue depth gauge provides a 0.02 mm vernier resolution (1/50 mm), enabling fine mechanical precision for depth measurements and careful dimensional verification. Is the instrument suitable for use in metalworking environments? Yes, the stainless steel construction and matt‑chrome plated scale make the Metav IndustryLine depth gauge M204.072 resistant to typical workshop conditions and suitable for routine metalworking tasks. Does the design allow measurement in narrow or recessed features? The pin probe tip on the M204.072 is specifically intended for access into narrow recesses, stepped bores and similar features where a flat depth blade would be impractical. Which standard governs this instrument's scale and reading method? The vernier and scale conform to DIN 862, ensuring standardised scale arrangement and measurement practice for analogue calipers. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Depth Gauge With Removable Double Hook 0.02mm Nonius, Supplied In Case - Metav IndustryLine
Take advantage of the combination of robust stainless steel construction, DIN 862 conformity and a fine 0.02 mm nonius for consistent, repeatable depth measurements; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Depth Gauge M204.077 — Depth gauge with double hook, 300 mm range and 0.02 mm nonius A Depth Gauge M204.077 designed to deliver precise depth and step measurement for general workshop and production control, complying with DIN 862 standards Stainless steel body, matt-chromed scale 300 mm measurement range Nonius 1/50 mm (0.02 mm) resolution Detachable double hook and measuring rod Reliable precision for everyday workshop control Designed within the common workshop length class, this depth instrument sits in the Standard category with a 300 mm measuring range — the sweet spot between reach and rigidity. The stainless construction and matt‑chromed scale ensure durable legibility and resistance to wear, while adherence to DIN 862 gives a clear reference for inspection protocols and incoming goods checks. This balance of reach and stiffness supports repeatable results when measuring recesses, steps or bore depths. Mechanical accuracy you can trust The analogue nonius provides a reading step of 0.02 mm (1/50 mm), placing the instrument at the upper end of mechanical vernier precision and making it suitable for tight workshop tolerances. The vernier layout is simple to interpret and requires no batteries, so measurement routines remain fast and uninterrupted. For quality control tasks where robust, low‑maintenance tools are preferred, the analogue design combines longevity with dependable resolution. Practical design for versatile measuring tasks Equipped with a double hook and an adjustable measuring rod, the gauge adapts quickly to different depth and step geometries, improving workflow efficiency on the shop floor. The instrument’s stainless steel body and matt‑chromed scale minimise reflections and surface wear, while the supplied transport case protects the gauge during storage and transit. The compact, tool‑centric layout reduces handling time and helps standardise routine checks across multiple operators. Choose the Metav IndustryLine M204.077 for robust, DIN 862‑compliant depth measurement and contact Metav Werkzeuge in Emmerich for purchase and technical advice Technical data Article number: M204.077 GTIN: 4054469164113 Manufacturer: Metav IndustryLine Standard: DIN 862 Facts Measurement range: 0–300 mm Resolution: 0.02 mm (1/50 mm nonius) Bridge/jaw length: 100 mm Special features Material: stainless steel; scale and vernier matt‑chromed Double hook, removable measuring rod Analog vernier construction Supplied in transport case FAQ What is the measuring range of this depth gauge? The M204.077 offers a measuring range of 0–300 mm, making it suitable for standard workshop and machine‑shop tasks. What precision does the vernier provide? The analogue vernier on the gauge reads to 0.02 mm (1/50 mm), which is appropriate for high‑accuracy mechanical inspections. Is the instrument suitable for production quality checks? Yes, the DIN 862 compliance and robust stainless construction make the depth gauge well suited to routine production and incoming inspection. Does the gauge come with a protective case? The instrument is supplied in a transport case to protect the gauge during storage and movement. What materials is the gauge made from? The body is manufactured from stainless steel; the scale and vernier are matt‑chromed for durability and readability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Depth Gauge With Removable Hook 0.02mm Nonius, Matte Chrome Scale, Plastic Case - Metav IndustryLine
The combination of precise 0.02 mm nonius reading, robust stainless steel construction and an adjustable hook rod makes this depth gauge an efficient choice for everyday workshop metrology; ideal for consistent depth checks and small-batch quality control. Order the instrument directly via Metav Werkzeuge or consult the Metav team for application advice. Depth gauge with adjustable hook, 300 x 150 x 0.02 mm (DIN 862) — Metav IndustryLine The Depth gauge with adjustable hook is a mechanical depth-measurement instrument designed for general machining and metalwork, offering DIN 862 conformity and a 300 mm measuring range in a Standard-class format. DIN 862 conformity and mechanical reliability 0.02 mm nonius for high mechanical precision Stainless steel body with matt chrome-plated scale Adjustable hook rod for versatile depth access Precision that supports repeatable decisions The mechanical vernier delivers a 0.02 mm resolution (1/50 mm nonius), placing this instrument in the highest bracket of mechanical precision for analogue calipers. Conformity with DIN 862 ensures a recognised tolerance framework, which simplifies documentation in inspection routines and quality records. For machine shops and metalworking departments that favour proven, battery-free measuring tools, the fine vernier reading reduces interpretation error and supports consistent depth measurements across repeated operations. Robust design for routine workshop use Constructed from stainless steel with a matt chrome-plated scale and vernier, the gauge resists corrosion and retains legibility under workshop conditions. The adjustable hook rod expands accessibility for recessed and stepped depths while the 150 mm bridge offers stable guidance during measurement. Being analogue, the instrument requires no power source and benefits from straightforward mechanical adjustment and long-term serviceability, reducing downtime and simplifying maintenance schedules. Practical applications and integration into quality workflows Classified as Standard (measuring range up to 300 mm), the gauge suits everyday tasks in machine and metal construction, jig and fixture checks, and component depth verification. The device provides a clear, mechanical readout that integrates easily into existing inspection procedures, and the physical construction supports frequent handling. Supplied in a protective transport case, it is ready for workshop use and safe storage between shifts. Contact Metav Werkzeuge for tailored advice or to request the Metav IndustryLine depth gauge M204.079 for your workshop; technical consultants in Emmerich are available to discuss measurement workflows and compatibility Technical data Article number: M204.079 GTIN: 4054469164090 Standard: DIN 862 Type: Analog (mechanical) Facts Measuring range: 0–300 mm Bridge (jaw span): 150 mm Resolution: 0.02 mm (1/50 mm nonius) Material: Stainless steel; scale and vernier matt chrome-plated Special features Adjustable hook rod for recessed depths Supplied in transport case for safe storage and transport No batteries required (mechanical operation) Suitable for Standard-class workshop metrology FAQ What measurement range does this depth gauge cover? The depth gauge covers a measuring range of 0–300 mm and is classified in the Standard range suitable for typical workshop and machine‑shop tasks. How fine is the reading on the vernier? The vernier provides a resolution of 0.02 mm (1/50 mm), giving the Metav IndustryLine depth gauge M204.079 high mechanical measuring precision for analogue use. Is the instrument suitable for harsh workshop environments? Yes, the device is made from stainless steel with a matt chrome-plated scale and vernier, designed to remain legible and resistant to routine workshop wear. Does the depth gauge require calibration or batteries? The depth gauge operates mechanically and requires no batteries; calibration status depends on the supplied certificate—please enquire if a specific calibration standard is required for the Metav IndustryLine instrument. What makes the adjustable hook rod useful? The adjustable hook rod allows access to recessed or stepped depths that fixed probes cannot reach, increasing the range of practical depth measurements in fixtures and components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Depth Gauge With Removable Hook 0.05mm Nonius, Chrome Scale, Supplied In Case - Metav IndustryLine
The combination of DIN 862 conformity, a 0.05 mm vernier and a robust matt‑chromed stainless steel construction ensures repeatable depth readings for routine workshop tasks; order the depth gauge directly via Metav Werkzeuge or consult our specialists for application advice. Depth gauge with reversible hook (DIN 862) — Metav IndustryLine, 300 mm range, 0.05 mm vernier The Depth gauge with reversible hook is a workshop‑grade analogue depth measuring instrument designed for standard machining and inspection tasks up to 300 mm. Stainless steel construction, matt‑chrome scale and vernier Vernier resolution 0.05 mm to DIN 862 Reversible hook for flexible depth measurement Supplied in a protective transport case Repeatable shop accuracy for everyday measurement This analogue instrument delivers consistent depth readings thanks to a mechanical vernier with 0.05 mm resolution (1/20 mm). The vernier system follows DIN 862, which places the device in the widely accepted industrial standard for mechanical calipers and gauges. For daily quality control and set‑up tasks the gauge reduces rework by providing a reliable reference value; the clear, matt‑chrome scale improves legibility under workshop lighting, so measurements can be taken swiftly and with fewer visual errors. Practical handling and robust construction A stainless steel body combined with a matt‑chromed scale and vernier provides corrosion resistance and a low‑glare finish that endures shop use. The reversible hook extends the functional range of the instrument, allowing both edge‑based and stepped depth measurements without auxiliary tools. The compact bridge length supports stable placement when measuring recesses, and the analogue design avoids battery dependence, offering immediate readiness and minimal maintenance for everyday use. Ready for integration in the workshop environment Classified in the Standard measuring range (up to 300 mm), this depth gauge balances reach with stiffness for routine machine‑shop work. Delivery in a protective transport case preserves calibration and reduces the risk of damage during storage or transit. The instrument is intended as a practical, low‑complexity solution where proven mechanical precision and ease of use matter most — an efficient addition to any toolset focussed on reproducible results. Request expert advice or order supply from Metav Werkzeuge for the Metav IndustryLine depth gauge with DIN 862 accuracy and protective transport case Technical data SKU: M204.055 GTIN: 4054469102634 Norm: DIN 862 Type: analogue depth gauge Material: stainless steel; scale and vernier matt‑chromed Core specifications Measuring range: 0–300 mm Minimum range: 0 mm Vernier resolution: 0.05 mm (1/20 mm) Bridge length: 150 mm Tariff number: 90173000 Special features Reversible / removable hook for flexible depth measuring Supplied in transport case for safe storage and transport Analogue vernier operation, no batteries required Suitable for standard workshop measurement and inspection FAQ What measuring range does this depth gauge cover? The depth gauge covers 0–300 mm and is classified in the Standard measuring range suitable for general machine‑shop and metalworking tasks; reference SKU M204.055. What resolution and reading accuracy can be expected? The vernier provides a resolution of 0.05 mm (1/20 mm) in accordance with DIN 862; this level of resolution is typical for industrial analogue measuring tools used in routine inspection and set‑up. Is a calibration certificate supplied with the instrument? The instrument is supplied as a standard workshop analogue depth gauge; no ISO 17025 calibration certificate is included with the basic delivery. How does the reversible hook affect measurement capability? The reversible hook allows precise depth measurement from edges and over steps without additional fixtures, increasing versatility for different component geometries. Is the instrument protected for transport and storage? Yes, the depth gauge is supplied in a protective transport case to reduce the risk of damage and preserve measurement integrity during handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Achieve reliable depth measurement with robust depth calipers
Depth calipers, commonly used for depth measurement and depth gauging, are precision tools designed to determine the depth of blind holes, inner grooves and similar features. These instruments use a slender measuring rod which is inserted into the recess so that the depth can be recorded to the underside of the workpiece with high repeatability.
How depth calipers work and where they belong in the workshop
Primarily constructed from stainless steel, depth calipers resist wear and deformation, ensuring stable accuracy even after prolonged use. The measuring rod is guided by a sled or rail and locked in position to read the distance from the reference face to the deepest point. They are indispensable for checking non-through holes, internal grooves and stepped recesses during machining, assembly and quality control processes.
Clear advantages that improve shopfloor efficiency
- Faster, repeatable checks thanks to a guided measuring rod and clear readout, reducing inspection time and rework.
- Wide selection of measuring ranges and leg lengths — from compact 45 mm legs up to 150 mm legs, and measurement capacities from up to 100 mm up to 300 mm, so the right tool fits each task.
- Choice of analogue or digital models: analogue calipers with vernier offer 0.03–0.08 mm accuracy and battery-free operation; digital models provide 0.01 mm / 0.0005 in resolution and typical accuracy of ±0.03 mm.
- Enhanced functionality on digital variants such as preset start, unit conversion (mm/in), automatic on‑off and models with IP67 protection for use in wet or dusty environments.
- Interchangeable measuring tips (flat, spherical, disc) and specialised hooks or double hooks for grooves increase versatility for complex geometries.
Metav as your precision partner in depth measurement
Metav combines decades of sector expertise with a broad, quality-controlled assortment, acting as a practical single source for precision tools. Based in Emmerich, Metav supplies the european market from a centralised quality filter and has built trust with over 48,000 customers. With more than 250,000 products available, Metav simplifies procurement and helps reduce supplier complexity while ensuring consistent availability.
In short: dependable tools for exact depth measurement
Depth calipers and depth measurement tools offer a straightforward, durable solution for precise depth checks across production and maintenance environments, delivering reliable readings and adaptable functionality for diverse workshop demands.
FAQ
What is the difference between analogue and digital depth calipers?
Analogue depth calipers use a vernier and typically achieve 0.03–0.08 mm accuracy without batteries, making them robust for harsh conditions. Digital depth calipers offer 0.01 mm / 0.0005 in resolution, easy unit switching and extras such as preset functions and automatic on‑off, with typical accuracy of ±0.03 mm.
Can depth calipers be used in wet or dusty environments?
Yes. Some digital depth calipers are rated IP67, providing dust-tight and temporary immersion protection so measurements remain reliable under adverse shopfloor conditions.
Which measuring range should I choose for blind hole inspection?
Select a depth caliper with a measuring range that exceeds the maximum blind hole depth you need to check; compact models suit depths up to 100 mm, while larger calipers cover ranges up to 300 mm. Also consider measuring leg length — common options include 45 mm to 150 mm — to ensure accessibility and stability during measurement.
Are there specialised tips for measuring uneven or grooved surfaces?
Yes. Depth calipers can be fitted with flat, spherical or disc‑shaped tips, and there are designs with single or double hooks or a round depth rail specifically for grooves, enabling accurate contact with irregular or recessed features.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com