Accurate depth measurement for precision metalworking
Depth measurement tools such as depth gauges and depth callipers are designed to determine the exact depth of blind holes, internal grooves and similar features, providing machinists with reliable results for quality control and fitting tasks. Made from stainless steel or rust‑resistant steel, these gauges ensure durability and long‑term stability while maintaining measurement accuracy across repeated use. Available in analogue and digital variants, users can choose robust vernier instruments or digital models with a 0.01 mm resolution and features like unit switching, preset functions and IP67 protection for harsh environments. With interchangeable probes, hook or double‑hook tips and varying stem lengths and measuring ranges, depth gauges adapt to applications from shallow grooves to deep bores, improving process repeatability and assembly precision.
200mm Depth Caliper Digital Swiss Digit Display 0.01mm Resolution IP67 ISO 17025 Calibrated - Microtech Metrology
This depth caliper combines ISO 17025 traceability, a clear Swiss Digit display and robust IP67 protection for dependable depth measurement in demanding workshop environments. Order the depth caliper directly via Metav Werkzeuge or ask our consultants for technical advice. Microtech Depth Caliper — Digital depth gauge with Swiss Digit display and IP67 protection A depth caliper designed for standard workshop and quality‑control tasks, offering a 0–200 mm measurement range and a rugged, dust‑ and water‑resistant construction. ISO 17025 calibration with certificate IP67 dust- and water-resistant Swiss Digit 11 mm digital display Hand-finished measuring jaws Traceable accuracy for quality control Calibrated to ISO 17025, this instrument supplies a documented basis for traceable inspections and audit‑ready measurements. The digital system provides a resolution of 0.01 mm on a Swiss Digit display with 11 mm high digits, while the specified accuracy of ±0.03 mm aligns with common shop‑floor tolerances for components up to 200 mm. For production control and incoming inspection, this combination reduces uncertainty and supports consistent decision‑making in acceptance testing. Built to withstand workshop conditions Designed with an IP67 rating, the caliper tolerates dust exposure and temporary immersion, making it suited to harsher environments where coolant splash or particulate matter are present. Hand‑finished measuring jaws ensure true seating on the measured surface, improving repeatability for depth measurements and reducing probing errors. The construction favours routine use and long‑term durability, helping to maintain calibration intervals and lower lifecycle costs. Efficient handling that speeds inspections The depth gauge layout and digital readout simplify repetitive tasks: readings are taken and recorded faster than with analog scales, which improves throughput in inspection routines. The 0–200 mm range covers the typical needs of metalworking and general engineering workshops, providing a practical balance of reach and rigidity. Clear digit visibility and straightforward operation cut cycle times and reduce operator strain, contributing to smoother quality workflows. For traceable depth measurement backed by Microtech precision, contact Metav Werkzeuge in Emmerich for tailored advice and to place an order — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 1432010203 GTIN: 4061905039164 Manufacturer: Microtech Metrology eClass: 21170344 Digital display: Swiss Digit, 11 mm IP protection: IP 67 Key figures Measurement range: 0–200 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Display height: 11 mm Special features Digital depth caliper ISO 17025 calibration and certificate included Hand-finished measuring jaws Suitable for standard workshop and quality control applications FAQ Is the instrument delivered calibrated? The depth caliper from Microtech Metrology is delivered fully calibrated to ISO 17025 and includes a calibration certificate, ensuring measurement traceability. What are the range and display resolution? The instrument offers a 0–200 mm measuring range with a digital resolution of 0.01 mm, and an accuracy specification of ±0.03 mm. Can this caliper be used on the shop floor? Yes; the IP67 rating and robust construction make the Microtech depth caliper suitable for workshop environments with dust and occasional liquid exposure. What kind of display does it use? The depth caliper features a Swiss Digit digital display with 11 mm high digits for clear legibility in typical inspection settings. Is this instrument suitable for routine quality control? With ISO 17025 calibration and documented accuracy, the caliper is appropriate for routine quality checks and traceable inspection workflows; refer to SKU 1432010203 for ordering. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200mm Depth Caliper Digital Touchscreen, Wireless USB, IP54, ISO 17025 Calibration - Microtech Metrology
Take advantage of a precision instrument that combines ISO 17025 traceable calibration, robust IP54 protection and flexible Wireless + USB data export; the combination ensures reliable workshop throughput and documented measurement results. Order the calibrated depth caliper directly via Metav Werkzeuge or consult the Metav specialists for application advice. Depth Caliper — digital depth gauge with colour touchscreen and wireless + USB transfer (Microtech Metrology) The Depth Caliper is a digital depth gauge designed for standard workshop and laboratory use, pairing a colour 1.54" touch display with wireless and USB connectivity for fast, documented depth measurements. Colour 1.54" touchscreen display Wireless and USB data output Calibrated to ISO 17025 with certificate IP54 protection against dust and splashes Precision and traceability for routine quality control This depth measuring instrument delivers 0.02 mm accuracy with a fine 0.005 mm reading step, making it suitable for industrial quality tasks while remaining easy to handle. Calibrated and supplied with an ISO 17025 certificate, the device supports traceable measurements and audit requirements; calibration documentation is included with the tool to simplify quality records. The solid technical basis reduces rework and supports faster inspection cycles in production environments. Robust design for the workshop environment Designed for everyday use, the instrument features IP54 protection and hand‑finished measuring jaws, combining environmental resilience with true contact geometry. The guarded slider and sturdy frame maintain measurement stability across repeated cycles, while the surface treatment helps resist contaminants in busy shops. This balance of durability and precision maintains consistent measurement results across shifts and operators. Faster data flow, fewer transcription errors Equipped with Wireless + USB data output and a colour touchscreen, the gauge enables direct transfer of readings to inspection software or a PC, reducing manual entry and associated errors. The intuitive display accelerates routine checks and the wireless option supports semi‑automated data capture on the shop floor. For traceability and statistical process control, this direct data path streamlines documentation and shortens measurement-to-decision time. Range classification and typical applications With a measuring range of 0–200 mm, the instrument falls into the standard category for machine and metalworking tasks — a common choice for 150/200/300 mm shop bases. It is intended for depth measurements on components, fixtures and housings where a blend of reach and stiffness is required. The calibrated unit is well suited for workshop quality control, component inspection and maintenance tasks that demand documented, repeatable depth readings. For traceable, workshop‑ready depth measurement choose the Microtech Metrology depth caliper calibrated to ISO 17025 — contact Metav Werkzeuge in Emmerich for purchasing and application guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: 1432010207 GTIN: 4061905039065 Brand: Microtech Metrology Calibrated: ISO 17025 certificate included Facts Measuring range: 0–200 mm Reading step: 0.005 mm Accuracy: ±0.02 mm Display: Colour 1.54" touchscreen Special features Data output: Wireless + USB Protection class: IP54 Hand‑finished measuring jaws Digital depth gauge / calibrated instrument eClass: 21170344 FAQ Is the gauge delivered calibrated? Yes. The depth caliper from Microtech Metrology is delivered fully calibrated with an ISO 17025 calibration certificate included. What is the usable measuring range and typical application? The instrument covers 0–200 mm and is classified as a standard caliper range, suitable for machine‑shop depth measurements, fixture checks and component inspection. How are measurements exported to a PC or inspection system? Readings can be exported via the built‑in Wireless interface or the USB connection for direct capture into inspection software or spreadsheets. What protection does the housing provide in a workshop? The unit is rated IP54, offering reliable resistance against dust ingress and water splashes commonly encountered in production environments. Are the measuring jaws suitable for repeated workshop use? Yes. The caliper features hand‑finished measuring jaws designed to retain geometry and ensure consistent contact across repeated measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200mm Depth Caliper Double-Stepped Measuring Beam, Lock Screw, Laser-Engraved Scale - Mahr GmbH HELIOS-PREISSER
Take advantage of precise depth, width and spacing measurement combined with a robust, workshop-ready design and easily secured readings; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Depth Caliper 200 mm – double-offset 8 x 3 mm measuring blade (Helios‑Preisser) The Depth Caliper 200 mm is a precision depth and distance measuring instrument for workshop inspection and setup tasks, featuring a reversible, double-offset measuring blade for narrow access and stable guidance Double-offset 8 x 3 mm measuring blade Combined width, spacing and depth measurement Locking screw for secure readings Laser-etched vernier and scale, matt chrome finish Reliable depth, width and spacing measurement for production use The Depth Caliper 200 mm delivers consistent results by combining a classic vernier readout with a laser-etched scale. The double-offset blade allows measurement in recessed or obstructed areas while maintaining parallel guidance, so depth and spacing checks remain repeatable. The matt chrome finish on scale and vernier reduces glare and improves legibility under workshop lighting. Because the scale is permanently marked by laser, measurement clarity is preserved through frequent use and cleaning. Stiff, compact design that withstands routine workshop handling The measuring blade's 8 x 3 mm cross-section and the double-offset configuration provide a slim profile without sacrificing rigidity, permitting access into slots and grooves where a bulkier gauge would not reach. A locking screw secures the slider for transfer measurements and reduces the risk of lost readings during handling. The reversible blade concept enables quick adaptation to different measuring directions, which speeds up repetitive inspection tasks and reduces setup time at the bench. Clear advantages for inspection and quality control workflows Precision marking of the scale and vernier by laser supports traceable readings and simplifies documentation in quality processes. The instrument is marked as inspection-required, signifying that it is intended for use within calibrated measurement chains; this supports compliance with internal quality systems and external audits. By using a calibrated manual depth caliper, shops benefit from straightforward verification of depths, steps and clearances without reliance on complex or powered systems, which speeds decision-making on the shop floor. Practical handling, target groups and workshop benefits Maintenance is straightforward: the matt chrome surfaces resist common workshop wear and the mechanical construction requires no batteries, ensuring readiness at every inspection. The caliper suits machinists, toolmakers, quality inspectors and maintenance technicians who demand a compact, dependable tool for routine depth, width and spacing checks. For customers seeking a single supplier with dependable delivery and technical guidance, Metav Werkzeuge offers this instrument as part of a comprehensive measurement range aligned with workshop requirements. Contact Metav Werkzeuge in Emmerich for detailed technical advice or to arrange supply of this Helios‑Preisser depth caliper; technical questions can be sent to info@metav-werkzeuge.com or discussed by phone on +49 2822 7131930 Technical Data Article number: 4000851191NW SKU: 4000851191NW Product type: Depth caliper Manufacturer: Mahr GmbH HELIOS‑PREISSER Facts Measuring range: 200 mm Measuring blade cross-section: 8 x 3 mm Scale: Vernier and scale, matt chrome Calibration requirement: inspection required Special features Double-offset, reversible measuring blade Locking screw Laser-etched scale and vernier Suitable for width, spacing and depth measurement FAQ What measuring tasks is this instrument suited for? This depth caliper is designed for depth, width and spacing measurements in workshop and inspection contexts; its double-offset blade makes it suitable for recessed and narrow features. Is the scale readable under bright workshop lights? Yes, the matt chrome finish and the laser-etched vernier minimise reflections and improve legibility for consistent readings. Does the instrument require calibration? The tool is marked as inspection-required and should be integrated into a calibration routine to ensure traceability in quality control processes. Manufacturer / Responsible: Mahr GmbH Helios-Preisser Vertrieb; Ölbergstraße 19; 72501 Gammertingen; Germany; +49 7574 400-60
200mm Depth Caliper E‑Ink Display, 0.02mm Accuracy, IP54, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of certified accuracy, robust protection and low‑power readability for reliable depth measurements in production and quality control. Order the depth caliper directly via Metav Werkzeuge or ask the consultants for application advice. Depth Caliper — E‑Ink Display, ISO 17025 Calibrated (Microtech Metrology) The Depth Caliper is a digital depth gauge designed for standard workshop and machine‑tool measurements with a measuring range up to 200 mm, combining rugged protection and laboratory‑grade traceability. E‑Ink display for clear, long battery life ISO 17025 calibration with certificate included IP54 splash and dust protection Hand‑finished measuring jaws for stable contact Certified traceability for production quality The instrument is supplied fully calibrated to ISO 17025 standards and includes a calibration certificate, which supports traceability in documented quality processes. With a stated accuracy of 0.02 mm and a fine 0.005 mm reading, the device meets the demands of standard workshop inspection and routine quality assurance. The calibration by a recognised laboratory reduces uncertainty and simplifies acceptance into inspection routines, making the tool suitable for documented incoming inspection, process checks and traceable measurement records. Clear legibility and robust operation on the shop floor An E‑Ink display provides high contrast and excellent readability under workshop lighting while consuming very little power, so the display remains readable even after long intervals in storage. The housing meets IP54 protection, providing reliable resistance against dust ingress and splashes that commonly occur in production environments. Hand‑finished measuring jaws ensure consistent contact geometry, which reduces measurement scatter when assessing recessed features or deep bores. Practical range and handling for everyday tasks Classified in the Standard category for calipers, the 0–200 mm measuring span balances reach and stiffness for typical machine‑shop and metalwork applications. The depth‑oriented measuring design is optimised for flat surfaces and stepped features; the slim slider and compact beam profile maintain handling comfort and minimise deflection during measurement. The combination of the 200 mm range and the instrument’s mechanical refinement supports repeatable results across a broad set of workshop tasks. Integration into inspection routines and documentation The digital output and established calibration protocol facilitate incorporation into quality workflows and documentation. The included calibration certificate documents conformity to measurement standards, which is beneficial for internal audits and supplier qualification. The robust construction and precise sliding elements reduce rework and sampling frequency by improving first‑pass measurement reliability, thereby supporting efficient production monitoring and quality control. Contact Metav Werkzeuge for technical comparison, calibration options or to request the ISO 17025 certificate for this depth caliper; ordering and specialist advice are available from Metav Werkzeuge. Technical data Article number: 1432010208 GTIN: 4061905455797 Manufacturer: Microtech Metrology E‑class: 21170344 Facts Measuring range: 0–200 mm Resolution / reading: 0.005 mm Accuracy: 0.02 mm Protection rating: IP54 Special features Digital caliper with E‑Ink display Hand‑finished measuring jaws Supplied with ISO 17025 calibration certificate Depth measuring function Category: Digital calipers FAQ What measurement accuracy can be expected from this caliper? The depth caliper from Microtech Metrology is specified with an accuracy of 0.02 mm and a reading resolution of 0.005 mm, suitable for standard workshop and quality‑control tasks. Is a calibration certificate supplied with the instrument? Yes — the delivery includes an ISO 17025 calibration certificate documenting traceability and conformity to recognised laboratory standards. How does the E‑Ink display benefit everyday use? The E‑Ink display offers clear contrast and very low power consumption, improving legibility on the shop floor and extending battery life for the Microtech Metrology depth gauge. Can this instrument be used in damp or dusty environments? The depth gauge is rated IP54, providing protection against dust intrusion and splashes, making it well suited for typical workshop conditions. Which product identifiers are relevant for ordering or inventory? Refer to SKU 1432010208 and GTIN 4061905455797 for ordering and inventory management of the Microtech Metrology depth caliper. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200mm Depth Gauge 0.02mm Resolution Stainless Steel Matt Chrome Scale, DIN 862 In Case - Metav IndustryLine
The robust stainless-steel construction combined with 0.02 mm vernier resolution and a locking screw ensures reliable, repeatable depth readings for everyday workshop and inspection tasks; delivery in a protective case protects the instrument in transit. Order the depth gauge directly via Metav Werkzeuge or ask our consultants if needed. Depth Gauge M204.041 — stainless steel depth gauge, 0.02 mm vernier (Metav IndustryLine) Depth Gauge M204.041 is an analogue depth measuring instrument designed for general workshop and quality-control tasks with a 200 mm measuring range and DIN 862 conformity Stainless steel construction with matt-chrome scale Vernier accuracy 0.02 mm (1/50 mm) Locking screw for repeatable readings Delivered in a protective case Consistent, traceable depth measurements for production control The instrument delivers 0.02 mm resolution through a bottom vernier, meeting the expectations of fine mechanical measurement where repeatability matters. The DIN 862 conformity signals that the design follows familiar metrological standards, which simplifies integration into existing inspection routines. The matt‑chrome scale and vernier improve contrast under workshop lighting, while the locking screw secures readings for transfer and documentation. This combination reduces measurement error and shortens time spent on rechecks, supporting a more efficient inspection workflow. Built to withstand daily workshop demands Manufactured from stainless steel with a matt‑chromed scale and vernier, the gauge resists corrosion and maintains readable graduations in mixed shop environments. The 200 mm measuring range places the instrument in the Standard class (measuring ranges up to 100–300 mm), offering the best balance of reach and stiffness for typical machining, metalworking and assembly tasks. A compact mass of approx. 0.18 kg and a practical bridge dimension of 100 mm keep the tool manoeuvrable while providing the structural rigidity needed for reproducible depth checks on fixtures and components. Practical handling that speeds up routine checks The analogue vernier mechanism is immediate and does not require batteries, providing dependable operation at the workbench. The bottom vernier layout offers clear reference for depth measurements and, together with the locking screw, enables stable readings during transfer or recording. Supplied in a protective case, the instrument is ready for secure storage and safe transport between workstations or to the inspection bench. This simplicity supports fast adoption by operators and ensures that calibration cycles focus on instrument traceability rather than day‑to‑day reliability. For reliable, workshop-ready depth checks choose the Metav IndustryLine Depth Gauge M204.041 — contact Metav Werkzeuge in Emmerich for ordering and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M204.041 GTIN: 4054469164007 Category: Messschieber Standard: DIN 862 Facts Measuring range: 0–200 mm Bridge: 100 mm Resolution: 0.02 mm (1/50 mm) Weight: 0.18 kg Instrument type: analogue (vernier) Special features Material: stainless steel; scale and vernier matt‑chromed Locking screw included Delivered in protective case Designed for standard workshop and inspection tasks Classified as Standard measuring range (100–300 mm) FAQ What is the measuring range of the depth gauge? The depth gauge M204.041 has a measuring range of 0–200 mm, suitable for Standard class workshop measurements. What resolution and vernier does the instrument offer? The instrument provides 0.02 mm resolution via a bottom vernier (1/50 mm), giving precise analogue readings for depth checks. Is the gauge suitable for use in a corrosive environment? The M204.041 is made from stainless steel with a matt‑chrome scale and vernier, offering good corrosion resistance for general workshop conditions. Does the depth gauge come with a protective case? Yes, the depth gauge is delivered in a protective case to safeguard the instrument during storage and transport. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Depth Gauge 0.05mm Vernier Stainless Steel Matt Chrome Scale, DIN 862, Supplied in Case - Metav IndustryLine
Take advantage of the combination of robust stainless steel construction, 0.05 mm vernier resolution and a secure locking screw for dependable depth measurement across routine workshop and inspection tasks — available directly via Metav Werkzeuge or by consultation with our experts. Depth Gauge M204.049 (Metav IndustryLine) — 200 × 100 mm, 0.05 mm vernier, stainless steel The Depth Gauge M204.049 is a stainless steel depth gauge for workshop and inspection use, compliant with DIN 862 and designed for reliable depth measurement in general machining and quality control. Stainless steel construction 0.05 mm resolution (1/20 mm vernier) DIN 862 compliant depth gauge Locking screw for repeatable readings Protective case for transport Reliable depth measurement for everyday workshop tasks This depth gauge is aimed at the workshop bench where repeatability and simple operation matter. The analog vernier reading with 0.05 mm resolution (1/20 mm) delivers a clear, battery‑free result that is easy to interpret on the matt‑chromed scale and vernier. Classified in the standard class (100–300 mm), the instrument balances reach with stiffness, making it suitable for everyday tasks such as checking bore depths, recesses or component shoulders where reproducible results speed up inspection routines. Precision and standards for reproducible results Constructed to meet DIN 862, the instrument provides a recognised reference for metrological checks in small to medium assemblies. The vernier system, which resolves to 0.05 mm, is a proven mechanical method: the user aligns the vernier lines with the main scale to read depths directly. This approach combines robust accuracy with straightforward traceability for shop‑floor documentation, supporting consistent quality control without relying on electronic systems. Robust build and user-friendly handling Made from stainless steel with a matt‑chrome finish on scale and vernier, the gauge resists routine workshop wear and remains legible under oil or light soiling. A dedicated locking screw secures the slider after measurement, reducing user‑induced variation and easing transfer of a reading. The bridge length of 100 mm provides stable contact across the gauge depth, while the compact form factor simplifies storage and handling during assembly work. Practical delivery and workshop integration The gauge is supplied in a protective case suitable for transport, which aids safe storage between uses and on the move. As a mechanically operated depth instrument it requires no batteries and integrates easily into conventional inspection processes. For procurement and recurring supply the association with Metav IndustryLine ensures access to spare parts and compatible measuring equipment, helping to maintain an uninterrupted inspection workflow. Contact Metav Werkzeuge for a specification check and reserve the M204.049 depth gauge for consistent, workshop‑ready depth measurement Technical Data Article number: M204.049 GTIN: 4054469102535 Standard: DIN 862 Type: Analog vernier depth gauge Resolution: 0.05 mm (1/20 mm) Measurement range: 0–200 mm Bridge length: 100 mm Locking screw: Yes Material: Stainless steel; scale and vernier matt chromium plated Delivery: Protective case included Facts Measurement range: 0–200 mm Resolution: 0.05 mm Nonius: 1/20 mm Classification: Standard class (100–300 mm) ECLASS: 21170349 Tariff number: 90173000 Special features Analog operation — no battery required Matt‑chrome scale and vernier for improved legibility Locking screw for repeatable readings Protective case for transport and storage Suitable for routine workshop and inspection tasks FAQ How precise is the instrument for routine inspection tasks? The M204.049 depth gauge offers 0.05 mm resolution via a 1/20 mm vernier, providing the repeatability expected for standard workshop checks and quality control within the 0–200 mm range. Is the depth gauge suited to both machining and assembly inspection? Yes, the instrument’s stainless steel construction and 100 mm bridge give the mechanical stability required for depth checks on machined parts and assembly fixtures. How is a measurement secured once taken? A locking screw is provided to fix the slider after taking a reading, which reduces variation during transfer and supports reproducible documentation. Does the instrument require batteries or electronic maintenance? No — the device is an analog vernier instrument and operates mechanically, eliminating the need for batteries and simplifying shop‑floor maintenance. What does the protective case mean for workshop use? The supplied protective case is intended for secure transport and storage, helping to keep the gauge protected from knocks and contamination between uses. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Depth Gauge 10x4.5mm Bridge Length 100mm 0.05mm Resolution - TECWERK
The combination of high repeatability and a 0.05 mm reading accuracy makes for reliable depth measurement in everyday workshop work; the solid guide rail and 100 mm bridge length further ensure stable, repeatable results. Order the instrument directly via Metav Werkzeuge or consult the Metav team for application advice. Depth Caliper DIN 862 200 mm (0.05 mm) — TECWERK Depth Caliper DIN 862 200 mm (0.05 mm) is a precision depth gauge tailored for workshop and industrial depth measurements, offering a clear vernier reading and robust guide rail for routine metrology tasks 200 mm measuring range 0.05 mm reading resolution 10 x 4.5 mm sturdy guide rail 100 mm bridge length for stable support Reliable precision that speeds quality checks The Depth Caliper DIN 862 200 mm provides a verifiable 0.05 mm reading increment, making it suitable for dimensional control where small deviations matter. The instrument complies with DIN 862, a practical standard for depth gauging, so results are immediately comparable across production and inspection processes. Faster acceptance of parts and fewer repeat operations are the direct benefits of reduced measurement uncertainty. Robust guide rail for consistent repeatability A 10 x 4.5 mm guide rail and a 100 mm bridge length give the gauge a steady contact surface and improved lateral stability. This structural configuration reduces flex during measurement and supports reproducible depth readings on flat and stepped workpieces. The sturdy construction is aimed at frequent workshop use, where mechanical stability translates into fewer measurement-related stoppages. Designed for smooth integration into workshop routines With a 200 mm measuring span the caliper covers typical depth tasks without tool changes, shortening cycle times and simplifying tooling inventories. The straightforward vernier principle keeps operation intuitive while ensuring traceable results for quality records. Supplied as a single unit, the depth gauge is ready for immediate deployment on the bench or in routine inspection stations, supporting a pragmatic workflow in small to medium-sized production environments. Contact Metav Werkzeuge for tailored advice on the TECWERK depth caliper and ensure precise depth measurement at the workshop bench; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000851218NW Label: Tiefenmessschieber DIN 862 200mm ger.Schiene 10x4,5mm TECWERK SKU / UID: 2000851218NW Facts Measuring range: 200 mm Reading resolution: 0.05 mm Guide rail cross-section: 10 x 4.5 mm Bridge length: 100 mm Packaging unit: 1 Special features Standard: DIN 862 Product type: Depth caliper Brand: TECWERK FAQ What measuring range does the caliper cover? The depth caliper offers a 200 mm measuring range, suitable for most workshop depth checks. What is the reading accuracy of the instrument? The instrument provides a 0.05 mm vernier reading resolution for fine depth measurements. Is the gauge compliant with an established standard? Yes, the tool is specified to DIN 862, ensuring standardised depth measurement practice. How is the stability of measurements ensured? Stability is achieved via the 10 x 4.5 mm guide rail and a 100 mm bridge length that reduce flex and improve repeatability Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
200mm Depth Gauge Digital Inductive Display mm/inch IP67, Hardened Stainless Steel in Case - Metav IndustryLine
Take advantage of fast, reproducible depth measurements thanks to the inductive measuring system and 0.01 mm resolution; robust, hardened stainless-steel construction and IP67 protection ensure reliable service in workshop and production environments. Order the instrument directly via Metav Werkzeuge or contact the consultants for tailored application advice. M218.121 — Digital depth caliper with inductive system and IP67 protection (Metav IndustryLine) The M218.121 is a digital depth caliper designed for standard workshop and quality‑control tasks, offering precise depth measurement up to 200 mm with an inductive measuring system and sealed protection for use in demanding environments. Digital inductive measurement, mm/inch selectable IP67 protection for dust and water resistance Hardened stainless-steel construction 0.01 mm resolution for reliable depth readings Durable construction for dependable depth measurement Hardened stainless steel construction and a sealed sensor housing combine to provide a stable measuring platform that resists wear and corrosion. The inductive measuring system reduces mechanical contact at the sensing element, lowering maintenance needs while delivering consistent readings. Conformance with DIN 862 confirms workshop‑grade design and suitability for routine inspection tasks. This combination of material quality and sensor design supports durable performance in both machine shops and inspection benches. Practical operation and measurement confidence Classified as a standard range instrument (0–200 mm), the caliper balances reach and stiffness for everyday metalworking and assembly tasks. The digital display offers mm/inch switching and a zero function, while the 0.01 mm resolution yields clear, comparable depth values for process control. A compact instrument weight of 0.4 kg aids handling at the bench, and the IP67 rating protects the electronics from coolant splashes and dust, reducing downtime from environmental exposure and improving throughput. Application versatility and integration into workflow The device serves as a reliable tool for depth checks on housings, bore steps and fitted parts where repeatable measurements matter. The inductive system minimises signal drift, so inspection data remain traceable against quality standards over time. For customers seeking a robust workshop caliper that fits existing inspection routines, this depth measuring instrument fulfils typical metrology requirements while remaining straightforward to operate and interpret. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine M218.121 depth caliper fits specific production needs or to request a detailed specification for procurement. Technical data SKU: M218.121 GTIN: 4054469146171 Manufacturer: Metav IndustryLine Facts Measuring range: 0–200 mm Resolution: 0.01 mm (0.0005 in) Weight: 0.4 kg Protection class: IP67 Standard: DIN 862 ECLASS: 21170349 Special features Material: hardened stainless steel Measuring system: inductive Digital display: mm/inch selectable, 0/ON/OFF and zero function Category: Depth caliper (standard range) FAQ What measurement range does this caliper cover? The depth caliper covers 0–200 mm and is classified as a standard‑range instrument suitable for everyday workshop and quality‑control tasks. How fine is the resolution and how stable are readings? Readings are shown with a resolution of 0.01 mm (0.0005 in). The inductive measuring system helps maintain stability and reduces drift during repetitive measurements. Is the caliper suitable for wet or dusty environments? Yes, the instrument is IP67 rated; the IP67 protection ensures resistance to dust ingress and temporary immersion, making it appropriate for harsher shop conditions. What material is the caliper made from? The frame and measuring faces are manufactured from hardened stainless steel, providing wear resistance and long service life in industrial use. Does the instrument comply with recognised standards? The design and specification reference DIN 862, reflecting adherence to established workshop measurement norms for calipers. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Depth Gauge Digital IP67 0.01mm Resolution Hardened Guide Rail 12 x 4 mm - HELIOS-PREISSER
Take advantage of 0.01 mm resolution across a 200 mm measuring range and proven IP67 protection for reliable shop‑floor depth measurement — order the depth caliper directly via Metav Werkzeuge or consult our specialists for application advice. DIGI‑MET Depth Caliper (DIN 862) 200 mm, IP67, Helios‑Preisser A DIGI‑MET depth caliper for precise industrial depth measurement, combining a 200 mm range with a sealed construction suited to workshop environments. 200 mm measuring range and 0.01 mm resolution IP67 dust and water protection for workshop use Cross‑section 12 x 4 mm, bridge length 100 mm Precision where tight tolerances matter The instrument delivers 0.01 mm reading increments across a 200 mm measuring span, meeting the expectations of quality control and precision engineering. Such fine resolution reduces inspection uncertainty: small deviations are immediately visible, allowing corrective action before further machining steps. Compliance with DIN 862 provides a familiar reference for standardised depth measurement, and the clear numerical resolution supports traceable documentation in production reports. For operations requiring repeatable, verifiable dimensions, this measuring device offers a measurable improvement in process control and yield. Robust design for routine workshop use Constructed to withstand demanding environments, the device carries an IP67 ingress protection rating, which means dust-tightness combined with temporary immersion resistance for enhanced reliability at the bench. The cross‑section 12 x 4 mm depth rod and bridge length 100 mm contribute to mechanical stability during measurement, reducing bending and ensuring consistent contact with the measured surface. These design elements minimise measurement noise and increase confidence when working on parts that demand repeatable depth readings. The result is a durable tool suitable for both production lines and service benches where contamination and splash are common. Practical integration and operational benefits As a digital depth gauge, the unit streamlines inspection workflows by providing immediate numerical readouts that speed decision making and reduce transcription errors. The compact measuring instrument is appropriate for workshops, maintenance departments and toolrooms where clear, fast depth checks are required. By replacing slower manual methods, the gauge shortens inspection cycles and supports faster throughput without compromising accuracy. For teams seeking dependable measurements and straightforward integration into existing quality procedures, the calibrated measuring device offers both technical precision and everyday usability. Contact Metav Werkzeuge today to discuss Helios‑Preisser measuring solutions and find the right depth caliper for specific applications — email: info@metav-werkzeuge.com or Tel: +49 2822 7131930 Technical Data SKU: 4000851176NW Type: DIGI‑MET Product: Depth caliper (Tiefenmessschieber) Brand: HELIOS‑PREISSER Standard: DIN 862 Facts Measuring range: 200 mm Resolution: 0.01 mm Cross‑section: 12 x 4 mm Bridge length (addition): 100 mm Packaging unit: 1 Special features IP67 rated Digital readout format (DIGI‑MET) Designed for industrial and workshop use FAQ How accurate is the depth measurement with this caliper? The DIGI‑MET depth caliper from Helios‑Preisser provides a reading resolution of 0.01 mm, enabling precise depth checks for quality control and machining verification (SKU 4000851176NW). What does IP67 mean for everyday use? IP67 indicates dust-tight construction and protection against temporary immersion, so the depth gauge withstands common workshop contaminants and accidental exposure to liquids. Is this instrument suitable for production inspection? Yes, the combination of 200 mm range and fine resolution makes the measuring instrument appropriate for routine production inspections and dimensional control tasks. What role does the bridge length play in measurement stability? The bridge length 100 mm increases contact stability and support when measuring deeper features, reducing deflection of the depth rod and improving repeatability. Can this caliper be used in maintenance workshops as well as toolrooms? Designed for industrial and workshop environments, the depth gauge is suitable for maintenance, toolroom checks and assembly‑line inspections where robust, repeatable depth measurement is required. Manufacturer / Responsible: Mahr GmbH Helios‑Preisser Vertrieb; Ölbergstraße 19; 72501 Gammertingen; Germany; +49 7574 400-60
200mm Depth Gauge Digital Wireless Swiss Digit Display IP67, Calibrated to ISO 17025 - Microtech Metrology
Take advantage of precise, traceable depth measurement with reliable shop‑floor protection and wireless data transfer; the instrument arrives calibrated to ISO 17025 and is ready for immediate quality‑control use. Order the Depth Caliper directly via Metav Werkzeuge or ask the consultants for assistance with integration and delivery. Depth Caliper (0–200 mm) by Microtech Metrology — Wireless, ISO 17025 calibrated The Depth Caliper (0–200 mm) is a robust digital depth gauge intended for workshop and inspection‑bench use, offering wireless data output and IP67 sealing for dependable measurements in harsh production environments. Wireless data output ISO 17025 calibration certificate included IP67 dust and water protection Swiss Digit display, 11 mm digits Reliable precision for daily quality checks The instrument covers a 0–200 mm measuring range, placing it in the Standard class that best balances reach and rigidity for general engineering tasks. With a display resolution of 0.01 mm and an accuracy of ±0.03 mm, the device provides repeatable depth readings that satisfy routine machining and assembly tolerances. Resolution specifies the smallest incremental change visible on the display, while the stated accuracy denotes the maximum expected deviation under standard conditions—together they enable fast, defensible measurements during set‑ups and incoming inspection. Faster documentation and protected operation on the shop floor Equipped with wireless data output and a high‑contrast Swiss Digit display (11 mm), the instrument reduces transcription errors and speeds transfer to digital records or SPC systems, supporting efficient traceability. The IP67 rating ensures protection against coolant, chips and dust, permitting use close to machining operations without compromising electronics. Handmade measuring jaws increase contact reliability and maintain measurement integrity where repeated probing occurs, so the gauge endures daily workshop handling. Traceable calibration and supplier reliability Delivered with a full ISO 17025 calibration certificate, the depth gauge can be integrated into formal quality processes immediately and referenced in audits. The manufacturer’s focus on metrology and the product’s sealed design make it suitable for both production control and laboratory checks. For customers seeking supply stability and a single‑source partner for calibration and logistics, Metav’s European distribution and quality‑filter approach ensures consistent availability and documented conformity. Contact Metav Werkzeuge for delivery, calibration documentation and integration advice at info@metav-werkzeuge.com or +49 2822 7131930 — Metav’s consultants support specification checks and order handling from Emmerich to the workshop floor. Technical Data Article number: 1432010204 GTIN: 4061905039171 Product: Depth caliper Manufacturer: Microtech Metrology Facts Measuring range: 0–200 mm Resolution (display): 0.01 mm Accuracy: ±0.03 mm Display: Swiss Digit, 11 mm high digits Protection class: IP67 Data output: Wireless Calibration: ISO 17025 certificate included Special features Digital depth gauge Handmade measuring jaws Suitable for workshop and inspection use Ready for immediate integration into quality processes FAQ What measuring tasks is this depth caliper best suited for? The depth caliper by Microtech Metrology is intended for everyday depth measurements on components, fixtures and housings where a 0–200 mm range and industrial durability are required. Is the instrument delivered with a calibration certificate? Yes, the depth gauge is supplied calibrated to ISO 17025 and includes the corresponding calibration certificate for traceable quality assurance. How precise are the readings from this digital depth gauge? The device provides a display resolution of 0.01 mm and an accuracy of ±0.03 mm, suitable for standard machine‑shop quality control and setup tasks. Can the caliper be used close to machining centres where coolant is present? With an IP67 rating, the instrument is sealed against dust and water ingress, making it suitable for use near machining operations and in damp shop environments. How is measurement data transferred from the depth caliper? Measurement values are transmitted via the gauge’s wireless data output for direct logging into digital records or compatible data collection systems. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200mm Depth Gauge Stainless Steel Matt Chrome Scale And Vernier 1/50mm, DIN 862 In Plastic Case - Metav IndustryLine
Take advantage of the combination of stainless steel construction, DIN 862 conformity and a 200 mm measuring range for reliable workshop measurement. Order the instrument directly via Metav Werkzeuge or contact our consultants for application advice and supply. Depth Gauge FE 200×100×0.02 mm (stainless) – analogue depth gauge, DIN 862 The Depth Gauge FE 200×100×0.02 mm is an analogue depth gauge intended for workshop and inspection tasks, providing a 200 mm measuring range and vernier resolution suited to standard machine‑shop control. Stainless steel construction 200 mm measuring range Nonius 1/50 mm bottom vernier Conforms to DIN 862 Precision where repeatability counts The instrument delivers a clear 0.02 mm reading via a 1/50 mm nonius, which corresponds to the engraved resolution on the scale. This mechanical vernier design ensures dependable, repeatable readings without reliance on batteries or electronics; the analogue principle is particularly robust in harsher shop environments. Fine‑thread fine adjustment allows controlled approach to the measuring surface, reducing user‑induced variation and helping to maintain consistent results during serial checks or tool set‑up. Built for practical workshop use Constructed from stainless steel, with the scale and vernier matt chrome‑plated for reduced glare and improved contrast, the instrument resists corrosion and keeps legibility over long service intervals. The 200 mm reach places this tool in the standard measuring class used across machining and metalwork: a balance of range and stiffness that suits typical jobs such as fixture inspection, component depth checks and maintenance tasks. The compact bridge dimension supports stable placement while maintaining manoeuvrability on the shop floor. Clear standards and traceable performance Designed to meet DIN 862, the instrument aligns with familiar workshop documentation and quality routines. The bottom vernier layout provides intuitive reading for technicians accustomed to traditional calipers and gauges; when combined with the fine adjustment, it enables controlled measurement of recessed features and stepped depths. For operations requiring digital data capture, this analogue depth gauge complements sensor systems as a rugged reference tool in quality control chains. Choose the Metav IndustryLine depth gauge for robust, standard‑compliant depth measurement and contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply Technical Data Article number: M204.086 GTIN: 4054469102757 Norm: DIN 862 Material: stainless steel; scale and vernier matt chrome plated Measuring range: 0–200 mm Resolution: 0.02 mm (1/50 mm) Fine adjustment: yes Instrument type: analogue (vernier) ECLASS: 21170349 Tariff number: 90173000 Facts Measuring range max: 200 mm Measuring range min: 0 mm Bridge: 100 Nonius: 1/50 mm (bottom) Analog: true Special features DIN 862 compliance Matt chromed scale and vernier Fine adjustment mechanism Stainless steel construction Manufacturer: Metav IndustryLine FAQ How accurate is the reading on this depth gauge? The depth gauge provides a vernier resolution of 0.02 mm (1/50 mm), delivering the repeatability expected for standard workshop metrology and aligning with DIN 862 guidance. Is this instrument suitable for daily workshop use on oily or humid jobs? Yes—the stainless steel construction and matt chrome finish on the scale and vernier make the instrument robust against common workshop conditions and preserve legibility. Can the depth gauge be used for measuring recessed depths and steps? The combination of a 200 mm measuring range and the fine‑adjustment feature allows controlled, reproducible measurement of recessed features and steps in fixtures and housings. Which category does this instrument fall into for measuring range classification? With a 200 mm maximum range, the tool is classified in the standard range, suitable for general machine‑shop and metalwork tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Depth Gauge Straight Slide 8x3mm With Locking Screw, Matt Chrome Scale - Mahr GmbH HELIOS-PREISSER
Combine the 8 x 3 mm straight measuring beam with a laser‑etched matt‑chrome vernier for reliable, repeatable depth readings; the caliper’s locking screw and DIN 862 conformity support inspection-led quality workflows. Order the depth caliper directly via Metav Werkzeuge or contact our consultants for technical advice. Depth Caliper DIN 862 200 mm — straight 8×3 mm beam, laser‑etched scale (Helios‑Preisser) The Depth Caliper DIN 862 200 mm is a precision instrument for depth measurement in workshop and inspection environments, designed for repeatable results and straightforward integration into quality control routines Straight 8 x 3 mm measuring beam Laser‑etched scale and matt‑chrome vernier Locking screw for secure measurement DIN 862 standard, inspection required Stable, high‑precision depth readings for production control The combination of a rigid 8 x 3 mm measuring beam and a laser‑etched scale provides high legibility and long‑term marking durability, which reduces re‑reading errors during repetitive tasks. The DIN 862 designation indicates the instrument is manufactured to a recognised metrology standard, ensuring that measurements are taken to a comparable industrial norm. The matt‑chrome finish on the vernier and main scale minimises reflections under workshop lighting and preserves contrast between graduations, making the unit suitable for both bench and machine‑side measurement. Such attributes support reliable data capture when documenting depth values for process control. Secure handling and repeatable setups for inspection routines A locking screw secures the slider once a depth is set, preventing slippage during transfer or marking operations and enabling repeatable setups for series work. The caliper’s straight beam geometry stabilises the measuring action and reduces lateral play, which is particularly beneficial when measuring narrow recesses or stepped features. Because the instrument is marked as inspection required, it aligns with routine calibration cycles and traceability demands within accredited quality systems, simplifying inclusion in audit‑ready measurement procedures. Practical design that fits everyday workshop use The tool’s construction focuses on practical durability rather than unnecessary complexity: the matt‑chrome surfaces are easy to clean and maintain, while the vernier format delivers a tactile, analogue reading that remains independent of batteries or electronics. The clear, laser‑etched graduations allow users with varying levels of metrology experience to interpret measurements confidently, and the slim profile is suited for confined areas where depth measurement is needed. The caliper performs consistently in typical industrial settings without the need for additional accessories. Integrating the caliper into a quality workflow When introduced into a workshop’s measurement protocol, the instrument supports quick checks during machining or assembly and provides a physical reference for deeper inspection steps. Its compatibility with standard inspection practices makes it straightforward to document results and retain proof of measurement. For teams scaling up process control, the caliper’s solid mechanical design offers a pragmatic, low‑maintenance solution that complements more advanced digital metrology equipment. Contact Metav Werkzeuge today for tailored advice on the Helios‑Preisser depth caliper and its suitability for specific applications — technical consultants are available by eMail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 4000851185NW Type: Depth caliper DIN 862 Measuring range: 200 mm Packaging unit: 1 Dimensions & core data Measuring beam cross‑section: 8 x 3 mm A: 8 mm B: 3 mm C: 3.5 mm Special features Straight measuring beam Locking screw Vernier and scale matt‑chrome plated High‑precision division by laser marking Inspection required (prüfpflichtig: yes) FAQ What measuring range does the instrument cover? The Depth Caliper DIN 862 200 mm (Helios‑Preisser, SKU 4000851185NW) covers a measuring range of 200 mm, suitable for most workshop depth checks. Is the scale durable for frequent workshop use? Yes — the caliper’s graduations are laser‑etched and the vernier and scale are matt‑chrome plated, so markings resist wear and remain legible under regular use. Does the caliper need to be included in calibration cycles? The instrument is marked as inspection required; therefore the Depth Caliper DIN 862 200 mm should be incorporated into the workshop’s calibration and traceability schedule. How does the locking screw affect measurement repeatability? The locking screw secures the slider to prevent movement after setting a depth, improving repeatability for series measurements and transfer tasks. Is the instrument compliant with an industrial standard? Yes — the caliper is manufactured to DIN 862, which denotes an established standard for vernier calipers used in industrial measurement. Manufacturer / Responsible: Mahr GmbH Helios‑Preisser Vertrieb; Ölbergstraße 19; 72501 Gammertingen; Germany; +49 7574 400-60
200mm Depth Gauge With Angle Attachment And Measuring Tip, DIN 862, Chrome Finish - Metav IndustryLine
Take advantage of precise depth measurement and a durable special‑steel build for consistent workshop results; the depth gauge with angle attachment 200×100 mm combines DIN 862 compliance with a fine 1/50 mm (0.02 mm) vernier for dependable readings. Order the depth gauge directly via Metav Werkzeuge or ask our consultants if needed. Depth Gauge with Angle Attachment — 200×100 mm, DIN 862 (Metav IndustryLine) Depth Gauge with Angle Attachment — a robust mechanical instrument for depth and step measurements in metalworking and general workshop environments, compliant with DIN 862. Precise 1/50 mm vernier resolution DIN 862 standardised construction Special‑steel body with matt‑chrome scale Suitable for standard 200 mm measuring range Accurate depth measurement for dependable results The depth gauge with angle attachment delivers repeatable depth readings by combining a long, stable measuring beam with a finely graduated vernier. The instrument’s 1/50 mm (0.02 mm) vernier provides a level of precision commonly required in workshop quality control and toolmaking; this corresponds to the highest mechanical precision available for analogue callipers. Compliance with DIN 862 ensures the gauge meets recognised manufacturing and inspection standards, which supports reliable acceptance during in‑house checks and incoming inspection. The analogue layout permits immediate, battery‑free operation and straightforward reading once the vernier alignment is understood. Robust construction and clear scale for everyday use A body forged from special steel and a matt‑chrome scale and vernier combine corrosion resistance with low‑glare readability. The matt‑chrome finish reduces reflections under strong workshop lighting, making the scale easier to read during repetitive tasks. The engineered contact surfaces and angle attachment are designed to sit square to edges and steps, reducing measurement error from misalignment. Together, these features reduce rework and measurement uncertainty, supporting a steadier production flow and fewer inspection disputes. Practical measuring range and handling for the shop floor With a 200 mm measuring range the gauge falls into the Standard class for calipers and depth gauges — a size that balances reach with stiffness for most machine‑shop and metal‑fabrication tasks. The included measuring stop and angle attachment enable reliable depth and step measurements on housings, bores and fixtures without the need to improvised jigs. The instrument’s geometry and weight distribution aid one‑handed handling while the vernier slide runs smoothly for controlled approach to the measurement point. These practical advantages translate into faster set‑up times and more consistent quality checks in daily production. For robust, DIN‑compliant depth measurement from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M204.044 GTIN: 4054469102498 Standard: DIN 862 Analog: yes Nonius: 1/50 mm (bottom) Facts Measuring range: 0–200 mm Maximum measuring range: 200 mm Bridge: 100 mm Tariff number: 90173000 Special features Material: special steel Scale and vernier: matt‑chrome plated Measuring stop included Angle attachment for edge and step measurements Analogue vernier operation FAQ What measurement accuracy does the instrument achieve? The depth gauge uses a 1/50 mm (0.02 mm) vernier, giving mechanical resolution suitable for fine workshop tasks; the design follows DIN 862 for consistent measurement behaviour. Is this gauge suitable for general machine‑shop use? Yes. With a 200 mm range it is classified in the Standard group, offering a practical balance of reach and stiffness for typical metal‑working, fixture and component measurements. How does the angle attachment improve measurements? The angle attachment provides a square contact to edges and steps, allowing the beam to register depths and offsets reliably without the need for additional fixturing; this reduces alignment errors during measurement. Is the instrument digital or analogue and what does that mean for use? The instrument is analogue with a bottom vernier; readings are taken visually from the scale and vernier which requires no batteries and gives immediate, low‑maintenance operation. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Depth Gauge With Double Hook And Removable Measuring Rod 0.02mm Nonius, DIN 862 - Metav IndustryLine
The combination of DIN 862 conformity, a 200 mm range and 0.02 mm vernier resolution makes this instrument a reliable choice for routine workshop depth checks and quality control. Benefit from a robust stainless‑steel build and an adjustable double‑hook measuring rod for versatile setups. Order the depth gauge directly via Metav Werkzeuge or request advice from our technical consultants if clarification is required. Depth Gauge M204.076 — depth gauge with reversible double‑hook, 200 mm, DIN 862 (Metav IndustryLine) The Depth Gauge M204.076 is a workshop depth gauge designed for precise depth, step and recess measurements in machinery, metal fabrication and general engineering applications Precision vernier 0.02 mm resolution Conforms to DIN 862 standard Adjustable double‑hook measuring rod Stainless steel with matt‑chrome scale Reliable metrology for everyday workshop tasks The instrument is built to supply reproducible results where consistent accuracy matters. Classified as a workshop‑standard depth gauge, it combines a 200 mm range with an analogue vernier that provides 0.02 mm graduations (nonius 1/50 mm), enabling fine readings for general machine‑shop tolerances. Compliance with DIN 862 ensures comparability with established measuring routines, so measurements can be integrated into inspection records and routine QC checks without ambiguity. The compact design keeps handling straightforward while preserving measurement integrity. Robust construction that reduces downtime Constructed from stainless steel with the scale and vernier matt‑chrome plated, the device resists corrosion and keeps scale legibility under workshop conditions. The reversible double‑hook measuring rod and removable measuring rod arrangement grant flexible fixturing on steps and recesses, simplifying setup for repetitive checks. At 0.16 kg the instrument is light to manoeuvre yet sufficiently rigid for stable contact, shortening inspection cycles and reducing the need for repeated measurements. Practical integration for productive inspection workflows With clear mechanical operation and no reliance on batteries, the gauge supports continuous use in production areas and inspection benches. The analogue vernier retains a tactile familiarity for technicians accustomed to classic calipers, while the DIN standardisation aids tool interchangeability across departments. The instrument is suited for standard‑range tasks in metalworking and mechanical assembly, delivering a pragmatic balance of reach, stiffness and readout precision that supports efficient process control. For workshops seeking a dependable workshop‑grade depth gauge, select the Metav IndustryLine Depth Gauge M204.076 and contact Metav Werkzeuge for tailored purchasing advice and specification support. Technical Data Article number: M204.076 GTIN: 4054469164106 Standard: DIN 862 Category: Messschieber SKU: M204.076 Facts Measuring range: 0–200 mm Resolution: 0.02 mm Nonius: 1/50 mm (bottom) Bridge: 100 mm Weight: 0.16 kg Special features Analog depth gauge (vernier) Reversible double‑hook measuring rod Stainless steel construction Scale and vernier matt‑chrome plated FAQ How precise is the depth measurement with this gauge? The Depth Gauge M204.076 provides a 0.02 mm vernier resolution (nonius 1/50 mm), suitable for standard workshop tolerances and conforming to DIN 862 for repeatable results. Can the instrument measure steps and recesses as well as depth? Yes, the adjustable double‑hook measuring rod and the gauge geometry allow measurement of depths, steps and recesses, making the tool versatile for common machining and assembly tasks. Is the gauge suitable for heavy workshop use? The depth gauge is made from stainless steel with a matt‑chrome scale and vernier, providing corrosion resistance and robust handling appropriate for regular workshop use. Does the product require calibration before use? The instrument is supplied as a precision mechanical measuring device; routine verification against a reference gauge is recommended to maintain traceability in quality systems. Which standards ensure compatibility with existing inspection procedures? The device is manufactured to DIN 862, ensuring compatibility with standard workshop inspection methods and documentation practices. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Depth Gauge With Dual Hook And Removable Probe 0.05mm Vernier, DIN 862 - Metav IndustryLine
Take advantage of exact depth measurement, robust stainless‑steel construction and a practical double‑hook with switchable measuring rod for consistent workshop results; order the instrument directly via Metav Werkzeuge or consult the Metav advisors for application-specific guidance. Depth Gauge M204.074 — analogue depth gauge, 200 mm range, 0.05 mm graduation (Metav IndustryLine) A Depth Gauge M204.074 designed for standard workshop depth measurements, offering a double‑hook and switchable measuring rod for versatile inspection tasks in metalworking and machine shops. Analogue depth gauge with 0.05 mm resolution Double-hook, switchable measuring rod Stainless steel body, matt-chromed scale Includes protective carrying case Precise, repeatable depth measurements for routine quality control The instrument delivers reliable readings thanks to its 0.05 mm graduation via an analogue vernier (1/20 mm), meeting the requirements of DIN 862. With a measuring range of 0–200 mm, this tool sits in the workshop standard category, balancing reach and rigidity for everyday tasks in machining and metal fabrication. The vernier principle enables direct visual reading without batteries, providing consistent results for depth checks where electrical devices would be unnecessary. Robust construction and adaptable measuring geometry Built from stainless steel with a matt-chromed scale and vernier, the gauge resists corrosion while maintaining legibility under workshop conditions. The double-hook design and switchable measuring rod permit straightforward conversion between plain depth measurement and hook‑engaged applications, reducing the need for additional fixtures. The compact, balanced form supports single-handed operation and quick set‑up, which saves time on repetitive measuring sequences. Practical handling, transport and routine use Lightweight and manageable at approximately 0.16 kg, the tool is easy to position and manoeuvre when inspecting pockets, bores or stepped features in assemblies. Delivered in a protective carrying case, the instrument stays protected in transit and storage, helping to preserve scale accuracy and surface finish. For routine shop use the analogue design provides resilient performance with minimal maintenance requirements compared with electronic alternatives. Who benefits and why Metav supplies make sense This depth gauge is aimed at machinists, maintenance technicians and quality controllers who need trustworthy, repeatable measurements without overcomplication. The instrument is particularly useful for workshop setups, jigs and fixtures where a robust mechanical gauge is preferred. Metav’s offering combines an extensive product range and European distribution reliability, helping workshops access precision tools with clear supply lines and longstanding sector expertise. Contact Metav Werkzeuge for tailored advice on the Depth Gauge M204.074 and to arrange supply from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com for application support and ordering information Technical Data Article number: M204.074 GTIN: 4054469102719 Manufacturer: Metav IndustryLine Facts Measuring range: 0–200 mm Resolution: 0.05 mm (vernier 1/20 mm) Bridge/rod length: 100 mm Weight: 0.16 kg Standard: DIN 862 Special features Stainless steel, scale and vernier matt-chromed Double-hook with switchable measuring rod Delivered in protective carrying case Analogue vernier (1/20 mm) Tariff number: 90173000 FAQ What accuracy can be expected from this depth gauge? The Depth Gauge M204.074 provides a resolution of 0.05 mm via an analogue vernier and is manufactured to comply with DIN 862 tolerances for workshop instruments. Is the instrument suitable for everyday machine-shop checks? Yes; the 0–200 mm range and robust stainless‑steel construction make the gauge appropriate for routine depth measurements in machining and metalworking environments. Does the delivery include protective packaging? The instrument is supplied with a protective carrying case to safeguard the scale and measuring surfaces during transport and storage. Can the gauge measure stepped features and bores as well as plain depths? Yes; the double‑hook and switchable measuring rod enable depth measurement of plain surfaces and engagement with stepped or recessed features. Is any calibration certificate included with the delivery? The product description does not indicate a supplied calibration certificate; calibration status should be confirmed if traceable calibration is required for quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Depth Gauge With Fine Adjustment, Stainless Steel Matt Chrome Scale, DIN 862 In Plastic Case - Metav IndustryLine
The combination of stainless steel construction, DIN 862 compliance and a fine‑adjustment screw ensures repeatable depth readings with industrial reliability; order the M204.084 depth gauge directly via Metav Werkzeuge or consult our specialists for application advice. M204.084 Depth Gauge (stainless steel, 200 mm) – Metav IndustryLine A M204.084 depth gauge for accurate depth checks in machining and workshop quality control, designed to meet DIN 862 requirements. Stainless steel body, matt‑chrome scale Fine adjustment screw for controlled contact Vernier resolution 0.05 mm (1/20) DIN compliant Dependable accuracy for daily shop measurement needs The 200 mm measuring range places this instrument in the standard class prized by machine shops for its balance between reach and stiffness. With a mechanical vernier designed to the DIN 862 norm and a resolution of 0.05 mm, the gauge provides a clear, quantifiable basis for acceptance decisions and set‑up checks. The fine‑adjustment feature keeps contact forces consistent during depth readings, which reduces measurement scatter and helps to prevent rework — an efficiency gain that translates directly into fewer production delays and more reliable quality control. Built to withstand workshop use while remaining easy to read Constructed from stainless steel with a matt‑chrome scale and vernier, the instrument resists corrosion and maintains legibility in demanding environments. The matt finish reduces glare under workshop lighting, improving contrast at the scale and supporting quicker, less error‑prone readings. Supplied in a protective case for transport, the gauge is ready for use on the bench or at the machine — robust handling and compact storage minimise downtime and protect the instrument between shifts. Mechanical design for low maintenance and continuous availability As an analogue depth gauge with a classic vernier mechanism, the tool requires no batteries or electronic upkeep, so operational readiness is immediate and predictable. The fine‑adjustment screw enables reproducible seating against the measured surface, which is especially useful during repetitive inspections or jig set‑ups. This simplicity makes the device a reliable companion for workshops, maintenance teams and toolrooms where durability and immediate availability are valued over electronic bells and whistles. Where this gauge adds value in production and inspection Ideal for machinists, maintenance technicians and quality inspectors, the gauge covers the typical measurement envelope used in metalworking and fabrication. The 200 mm range is a practical choice when broader reach is needed without giving up rigidity, fitting well as a complement to 150 mm and 300 mm tools in a calibrated toolset. Backed by Metav’s quality filter in Emmerich and a broad product range, the gauge supports consistent measurement chains across the shop floor and contributes to dependable production outcomes. Contact Metav Werkzeuge for advice on the Metav IndustryLine depth gauges and to arrange supply of the M204.084 from Emmerich. Technical data Article number: M204.084 GTIN: 4054469102733 Standard: DIN 862 Facts Measuring range: 0–200 mm Resolution: 0.05 mm (1/20 vernier) Bridge / depth blade: 100 Special features Material: stainless steel; scale and vernier matt‑chrome plated Fine adjustment screw for controlled contact Analogue vernier mechanism Supplied in protective transport case FAQ What is the smallest increment that can be read with this depth gauge? The depth gauge provides a vernier resolution of 0.05 mm (1/20), allowing repeatable readings suitable for standard workshop tolerances. Is the instrument suitable for daily use in a metalworking shop? Yes, the stainless steel construction, matt‑chrome scale and fine‑adjustment screw make the M204.084 robust and practical for routine shop use and set‑ups. Does the gauge comply with any measurement standards? The instrument is produced to DIN 862, offering a recognised baseline for mechanical measuring tools used in industrial quality control. How is the depth gauge delivered and protected during transport? The gauge is supplied in a protective case for transport, ensuring safe handling and reduced risk of damage between jobs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Depth Gauge With Hook, Digital Display 0.01mm, Stainless Hardened Steel, DIN 862, Supplied In Case - Metav IndustryLine
Take advantage of the combination of hardened stainless‑steel construction, a 0–200 mm measuring range and a clear digital display for fast, reproducible depth checks; order directly via Metav Werkzeuge or consult the specialists for application advice. Digital depth gauge 200 x 100 mm — stainless steel, digital display (Metav IndustryLine) The Digital depth gauge 200 x 100 mm is a compact, DIN 862 compliant instrument for precise depth measurement in metalworking and quality control environments. Digital display with ON/OFF, ZERO, UNIT, HOLD Hardened stainless steel housing 0–200 mm range, DIN 862 compliance Data output RB 5 for documentation Consistent precision where workshop measurement matters This depth gauge delivers a reliable mix of range and stiffness typical for the standard caliper class (max range up to 300 mm), making it well suited to general machine‑shop and metalwork tasks. The instrument’s hardened stainless‑steel construction and metal housing support stable readings and long service life, while compliance with DIN 862 ensures the device meets recognised dimensional measuring norms. With a resolution of 0.01 mm, the instrument provides fine graduation for routine quality checks and setup work without the complexity of laboratory equipment. Fast readings and documented results for efficient workflows A clear digital display with dedicated ON/OFF, ZERO, UNIT and HOLD buttons enables quick, unambiguous readings and easy switching between metric and imperial units. The integrated RB 5 data output permits direct measurement transfer for traceable records and simplified documentation of inspection results. The unit’s modest weight (approx. 0.55 kg) and compact form factor support steady single‑hand operation and rapid repetitive checks, improving throughput on the shop floor and reducing handling time during inspection sequences. Robust design and practical transport for daily use Designed for everyday industrial use, the instrument’s stainless‑steel, hardened slide and metal housing resist wear and maintain calibration stability under normal workshop conditions. The gauge is supplied in a protective case for secure transport and storage, protecting measuring faces during handling and transit. Its compact footprint and practical accessories support direct integration into workshop inspection benches, jig assembly checks or mobile quality rounds, offering a dependable balance of durability and portability. Contact Metav Werkzeuge for stock status, logistic details or assistance matching the Metav IndustryLine digital depth gauge to specific measuring tasks Technical data Article number: M218.075.N GTIN: 4054469160184 Designation: Digital depth gauge 200 x 100 mm, with hook, 3 V INOX, DIN 862 Facts Measuring range: 0–200 mm Resolution: 0.01 mm / 0.0005 in Weight: 0.55 kg Power supply: 3 V Special features Material: stainless steel, hardened, metal housing Display: digital with ON/OFF, ZERO, UNIT, HOLD Data output: RB 5 Delivered in protective transport case Compliant with DIN 862 FAQ What measurement resolution and typical accuracy does this depth gauge offer? The instrument provides a 0.01 mm resolution; as a standard digital measuring device within the 0–200 mm range, typical practical accuracy is consistent with industry norms for this class (commonly around ±0.03 mm for ranges up to 300 mm). Is the device suitable for routine metalworking quality checks? Yes, the Metav IndustryLine digital depth gauge M218.075.N is designed for workshop and machine‑shop inspection tasks, combining a 0–200 mm range with a hardened stainless‑steel build and DIN 862 compliance. Can measurements be transferred to inspection software or data loggers? The gauge features an RB 5 data output for measurement transfer, enabling integration with compatible readout or documentation systems for traceable records. Does the delivery include protective packaging for transport? The tool is supplied in a protective case to safeguard the measuring faces during transport and storage. Are imperial units available on the display? Yes, the digital display supports switching units (metric/imperial) using the UNIT key; the inch resolution is 0.0005 in. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Depth Gauge With Interchangeable Probe 0.05mm Vernier, Matt Chrome Finish, Supplied In Case - Metav IndustryLine
Benefit from a robust stainless steel construction, an interchangeable pin tip for recessed measurements and a precise 0.05 mm nonius for dependable depth checks in routine workshop work; order the depth gauge directly via Metav Werkzeuge or consult our specialists for application advice. Depth Gauge M204.064 — Analogue depth gauge with interchangeable pin tip, 0–200 mm, DIN 862 (Metav IndustryLine) The Depth Gauge M204.064 is an analogue depth caliper designed for machine‑shop and metalworking tasks, offering a 0–200 mm measuring range and a bottom vernier graduation of 0.05 mm for repeatable depth measurements. Stainless steel with matt-chrome scale Interchangeable pin-tip measuring rod Nonius 0.05 mm bottom graduation Conforms to DIN 862 for workshop use Accurate depth control that fits the workshop routine This depth caliper is engineered as a Standard-range instrument (0–200 mm), which covers the everyday requirements of machine and metalworking. The analogue nonius with a bottom graduation of 0.05 mm (1/20 mm) provides clear, verifiable readings for tasks where repeatability matters more than submicron resolution. Compliance with DIN 862 ensures that readings can be compared against recognised workshop tolerances, supporting efficient quality checks and reducing rework. The balanced combination of range and stiffness makes this gauge suitable for common assemblies, fixtures and small to medium components. Practical design for recessed and step measurements Equipped with an interchangeable pin tip and an extendable measuring rod, the tool adapts easily to a variety of recesses, pockets and stepped features. The body is made from stainless steel, while the scale and vernier are matt‑chrome plated, reducing surface glare and improving legibility under workshop lighting. At around 0.2 kg, the instrument is light enough for frequent handheld use yet rigid enough to keep readings stable. These design choices support faster inspection cycles and minimise handling errors during routine depth measurement tasks. Readability, care and benefits for everyday inspection The analogue layout keeps operation straightforward: the main scale indicates millimetres and the bottom vernier resolves to 0.05 mm, allowing technicians to perform quick checks without reliance on batteries or electronics. The simplicity of the mechanism reduces downtime and maintenance, while basic care — keeping the sliding faces clean and avoiding impacts — preserves accuracy. For operations seeking reliable gauging without excessive complexity, this depth caliper delivers consistent results and integrates smoothly into existing inspection workflows. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine M204.064 can streamline depth checks in your workshop or to request tailored application guidance. Technical data SKU: M204.064 GTIN: 4054469102696 Tariff number: 90173000 Standard: DIN 862 Type: analogue depth gauge Material: stainless steel, matt‑chrome plated scale and vernier Facts Range: 0–200 mm Resolution: 0.05 mm (nonius 1/20 mm) Weight: 0.2 kg Bridge length: 100 mm eClass: 21170349 Special features Interchangeable pin‑tip measuring rod Bottom vernier for depth reads Suitable for machine‑shop and metalworking inspection FAQ How precise is the depth measurement with this instrument? The depth caliper provides a bottom vernier resolution of 0.05 mm (nonius 1/20 mm); as an analogue gauge conforming to DIN 862, it is suitable for standard workshop tolerances and repeatable depth checks with clear, verifiable readings. Can the measuring tip be adapted for narrow or deep recesses? Yes — the instrument features an interchangeable pin tip and an extendable measuring rod, enabling measurements in narrow pockets, bores and stepped features without loss of stability. Is this depth gauge suitable for everyday machine‑shop use? The gauge is classified in the Standard range (0–200 mm), covering the common requirements of machine and metalworking and offering a practical balance of reach, stiffness and one‑hand operation. Does the instrument require batteries or electronic calibration? No; this is an analogue depth gauge with a mechanical nonius. Readings are taken visually from the main scale and vernier, avoiding reliance on batteries or electronic components. What identifiers should be used when ordering or specifying this tool? Reference the Metav IndustryLine Depth Gauge M204.064, SKU M204.064, GTIN 4054469102696 for clear identification and procurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Depth Gauge With Pointed Probe 0.02mm Resolution Stainless Steel, DIN 862, Supplied In Case - Metav IndustryLine
Take advantage of the combination of workshop-grade robustness, fine vernier resolution and corrosion-resistant stainless construction for reliable depth control in daily production. Order the depth gauge directly via Metav Werkzeuge or request advice from our consultants for application support. Depth Gauge with Pin Point M204.071 — 200 mm, 0.02 mm vernier (Metav IndustryLine) The Depth Gauge with Pin Point M204.071 is an analogue vernier depth instrument intended for precision depth measurement in machine shops, inspection benches and toolmaking environments. Vernier resolution 0.02 mm 200 mm measuring range for standard workshop tasks Stainless steel construction with matt chrome scale Conforms to DIN 862 vernier gauge standards Trusted precision for everyday workshop measurement The instrument delivers a 200 mm measuring range that places it in the standard class for workshop and metalworking tasks: the best compromise between reach and stiffness for routine inspection. The vernier resolution of 0.02 mm corresponds to the higher end of mechanical precision for analogue gauges and supports detailed depth readings where sub‑0.1 mm accuracy is required. Constructed from stainless steel with a matt chrome scale and vernier, the device resists corrosion and maintains legibility in industrial atmospheres. Conformance with DIN 862 guarantees familiar graduation and reading conventions for machinists and quality inspectors. Practical design that reduces measurement uncertainty A pinpoint measuring probe provides clear contact in small recesses and bores, while the instrument’s beam geometry (100 mm bridge) gives a stable reference for repetitive work. The lower-positioned vernier (1/50 mm bottom) is designed for reliable readings when the gauge is used on flat reference surfaces; the combination of the calibrated vernier and robust beam lowers operator-induced variability. As an analogue instrument, the gauge avoids electronic failure modes and is immediately usable without batteries, making it a dependable choice for on‑bench and in‑shop measurement routines where simple, repeatable depth checks are required. Applications, handling and upkeep Ideal for machine shops, toolmakers, mould and fixture assembly, the depth gauge excels at measuring step depths, slot depths and recesses. The analogue vernier format is straightforward to operate and to verify quickly against master gauges. Routine care consists of keeping contact faces clean and lightly oiled for storage; the stainless steel body simplifies maintenance and prolongs service life. Weighing 0.20 kg, the instrument is light enough for handheld work yet sufficiently solid to give stable readings during normal use. For users who prefer mechanical reading methods or require a rugged, zero‑power solution, this depth gauge offers an economical, durable option. For expert guidance on integrating the Metav IndustryLine depth gauge into inspection routines or to arrange procurement through Metav Werkzeuge, contact our team for tailored advice and ordering support. Technical Data Article number / SKU: M204.071 GTIN: 4054469164052 Manufacturer: Metav IndustryLine Net weight: 0.20 kg Standard: DIN 862 ECLASS: 21170349 Customs tariff number: 90173000 Facts Measuring range: 0–200 mm Bridge length: 100 mm Resolution: 0.02 mm Vernier: 1/50 mm (lower) Analogue operation: vernier (mechanical) Special features Pinpoint measuring probe for recesses and bores Body material: stainless steel Scale and vernier: matt chrome finish Suitable for workshop and inspection use Weight: 0.20 kg FAQ What accuracy can be expected from this analogue depth gauge? The Depth Gauge with Pin Point M204.071 delivers a vernier resolution of 0.02 mm, which represents high mechanical precision for analogue instruments and is suitable for many workshop inspection tasks. Is the depth gauge suitable for use in machine‑tool inspection and mould making? Yes, the Metav IndustryLine depth gauge is designed for standard machine‑shop and mould‑making applications where a 200 mm measuring range and stable beam geometry are required. How should the depth gauge be maintained to ensure long service life? Regular cleaning of contact faces and a light oil film on moving parts will preserve accuracy; the stainless steel construction of the M204.071 reduces corrosion risk and simplifies upkeep. Can the instrument measure depths in narrow bores or recesses? The pin‑point measuring probe is specifically intended to reach into narrow bores and small recesses, enabling reliable depth readings in confined geometries. Does the vernier follow a common standard for ease of reading and verification? The vernier conforms to DIN 862, making it compatible with established workshop reading techniques and straightforward to verify against master gauges. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Depth Gauge With Pointed Probe 0.05mm Nonius Matt Chrome, DIN 862 - Metav IndustryLine
Combine reliable stainless‑steel construction with a precise 0.05 mm nonius and a protective transport case for consistent workshop results; order the depth gauge directly via Metav Werkzeuge or consult our technical team for application advice. M204.061 Depth Gauge with Pin Tip — 200 × 100 mm, 0.05 mm resolution (Metav IndustryLine) The M204.061 depth gauge with pin tip is a robust, analogue measuring instrument for precise depth and step measurements in general metalworking and workshop quality control. Stainless steel construction, matt‑chrome scale 0.05 mm nonius resolution Conforms to DIN 862 standard Delivered in protective case Precise, repeatable depth measurement for routine checks The analogue nonius provides a resolution of 0.05 mm, achieved by the 1/20 mm scale system, which makes the instrument suitable for standard industrial tolerances. Conformity with DIN 862 ensures that readings are comparable within common workshop and production environments. The simple mechanical design eliminates dependency on batteries and electronic calibration routines, offering straightforward, repeatable results when measuring recess depths or step features. The clear nonius scale and robust beam reduce reading errors and provide confidence during repetitive inspection tasks. Corrosion resistance and legible scale for long service life Constructed from stainless steel with a matt‑chromed scale and nonius, the gauge resists workshop contaminants and light corrosion, maintaining readability and dimensional integrity over time. The matt finish reduces reflections under bright inspection lamps, improving visual contrast on the graduations. Supplied with a protective case, the tool is protected during storage and transport, helping to preserve the measuring faces and pin tip from accidental damage. These material choices support sustained accuracy in daily use and reduce the frequency of maintenance interventions. Ideal format for general mechanical and metalworking use With a measuring range of 0–200 mm, this instrument sits in the Standard category for calipers and depth gauges, offering a practical balance between reach and rigidity for most workshop tasks. The 100 mm bridge provides a stable support when probing deeper features, and the modest mass keeps handling comfortable during single‑handed measurements. The unit weight of 0.2 kg makes it manageable for frequent use while retaining sufficient stiffness to avoid excessive deflection on typical components. This format is a versatile choice for machinists, toolmakers and inspection staff who need dependable, everyday measuring capability. Contact Metav Werkzeuge today to secure the Metav IndustryLine M204.061 for dependable 0.05 mm depth measurements — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com for specifications and ordering. Technical Data Article number: M204.061 GTIN: 4054469102689 Manufacturer: Metav IndustryLine Core specifications Measuring range: 0–200 mm Resolution: 0.05 mm (1/20 mm nonius) Bridge: 100 mm Weight: 0.2 kg Customs tariff number: 90173000 Special features Stainless steel body Scale and nonius matt‑chromed Conforms to DIN 862 Analogue nonius readout Supplied in protective case FAQ What measuring range does this depth gauge cover? The depth gauge covers 0–200 mm, making it a standard‑length instrument suited to most workshop depth and step measurements. Is the scale easy to read under workshop lighting? Yes. The matt‑chrome scale and nonius on the M204.061 reduce glare and improve contrast for reliable readings in typical inspection environments. Does the instrument require batteries or electronics? No. The M204.061 is an analogue depth gauge using a mechanical nonius, so it operates without batteries and provides immediate readings. Is the gauge suitable for corrosion‑prone environments? The stainless‑steel construction offers improved corrosion resistance for workshop conditions; regular cleaning and proper storage in the supplied protective case will extend service life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Depth Gauge With Removable Hook 0.02mm Vernier, Matt Chrome Scale, Supplied In Case - Metav IndustryLine
Take advantage of the combination of robust stainless steel construction, an interchangeable hook for versatile depth access and a precise 0.02 mm vernier for repeatable workshop measurements; order the instrument directly via Metav Werkzeuge or consult our specialists for specification support. Depth Gauge with Interchangeable Hook 200×100×0.02 mm (DIN 862) — Metav IndustryLine A Depth Gauge with Interchangeable Hook engineered for standard workshop tasks up to 200 mm, offering reliable mechanical vernier accuracy and conformity with DIN 862. Stainless steel construction, matt chrome vernier Interchangeable hook for varied depth access Mechanical vernier with 0.02 mm resolution Supplied in a protective transport box Reliable depth measurement for everyday workshop use This depth gauge from Metav IndustryLine is designed for the typical demands of machine shops and metalworking departments, classified within the standard measuring range (100–300 mm). The instrument’s stainless steel body and matt‑chrome scale provide corrosion resistance and long service life, so measurements remain consistent even in busy production environments. Conformity with DIN 862 ensures that the gauge meets recognised mechanical calliper standards, which simplifies integration into existing quality procedures and inspection routines. Precision mechanics that support repeatable results A mechanical vernier with 0.02 mm resolution (1/50 mm) delivers fine graduations suited to accurate depth readings; this level corresponds to the higher end of mechanical calliper precision and is ideal when micrometre‑level electronic devices are not required. The interchangeable hook extends access to recessed features and stepped surfaces, reducing setup time and the need for improvised fixtures. Clear graduated markings and a firm sliding action minimise user error and improve throughput in routine inspection tasks. Practical handling, transport and storage benefits Thoughtful ergonomics and a low mass (approx. 0.16 kg) make the instrument easy to handle for single‑operator measurements, while the included protective transport box keeps the gauge secure between uses and during transit. The matt‑chrome finish on the scale and vernier reduces glare under workshop lighting, aiding quick, confident readings. Together, these features lower the risk of accidental damage and support consistent measurement practices across shifts. Contact Metav Werkzeuge for tailored advice on incorporating this depth gauge into production or inspection workflows — Metav Werkzeuge GmbH, Emmerich: info@metav-werkzeuge.com / +49 2822 7131930. Technical data Article number: M204.078 GTIN: 4054469164083 eClass: 21170349 Tariff number: 90173000 Facts Measuring range: 0–200 mm Resolution (vernier): 0.02 mm (1/50 mm) Bridge: 100 mm Weight: 0.16 kg Standard: DIN 862 Special features Material: stainless steel, scale and vernier matt chrome‑plated Interchangeable hook for recessed depths Analog vernier instrument Supplied in a protective transport box FAQ What accuracy can be expected from this depth gauge? The Depth Gauge with Interchangeable Hook 200×100×0.02 mm (DIN 862) provides a mechanical vernier accuracy of 0.02 mm, suitable for precise workshop checks where high mechanical repeatability is required. Is the depth gauge suitable for use in a production quality control routine? Yes — the instrument’s DIN 862 compliance and robust stainless steel construction make the gauge appropriate for routine quality control tasks in machine shops and metalworking environments. Can the interchangeable hook be removed for shallow measurements? The interchangeable hook is designed to be switched out or removed so the gauge adapts to both recessed and shallow measurements, increasing versatility during inspection operations. Does the product include protective packaging for transport? The depth gauge is supplied in a protective transport box to prevent damage during storage and transit, ensuring the instrument arrives ready for immediate use. What is the manufacturer and how can product authenticity be verified? This depth gauge is offered under Metav IndustryLine; the SKU is M204.078 and the GTIN is 4054469164083 for verification against supplier records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Depth Gauge With Removable Hook 0.05mm Vernier, Stainless Steel, DIN 862 - Metav IndustryLine
Take advantage of the combination of dependable precision, robust stainless steel construction and a versatile adjustable hook for consistent depth measurement in the workshop. Order the instrument directly via Metav Werkzeuge or contact our consultants for application advice. Depth Gauge with Adjustable Hook M204.054 — 200 mm range, 0.05 mm graduation (Metav IndustryLine) The Depth Gauge with Adjustable Hook M204.054 is an analogue depth measuring instrument to DIN 862 designed for routine workshop and machine‑shop depth checks. Depth gauge »M204.054« by Metav IndustryLine 200 mm measurement range, standard workshop size 0.05 mm nonius graduation to DIN 862 Stainless steel body, matt-chromed scale and vernier Precision and conformity for reliable depth checks The depth gauge delivers consistent precision thanks to its vernier graduation of 0.05 mm, corresponding to a 1/20 mm nonius. Conformity to DIN 862 ensures the measuring behaviour and tolerances meet recognised workshop standards, which simplifies integration into established quality procedures. The analogue reading is immediate and does not depend on batteries, making the instrument a low‑maintenance option for repeated checks on housings, bores or stepped features where small depth deviations must be avoided. Design and materials built for everyday workshop use Manufactured from stainless steel with the scale and vernier matt‑chromed, the gauge balances corrosion resistance with clear legibility under workshop lighting. At approximately 0.16 kg, the instrument feels sturdy without being cumbersome, supporting single‑hand operation for routine tasks. The construction minimises play and wear at the sliding surfaces, which helps preserve measurement repeatability over time and reduces the need for frequent adjustment. Practical versatility for common depth measuring tasks An adjustable hook expands the range of applications by allowing measurements in recessed or stepped features where a fixed probe would be awkward. With a 200 mm measuring range the instrument falls into the standard category—ideal for most machine‑building and metalworking needs where a balance of reach and rigidity is required. The 100 mm bridge provides a stable reference when measuring deeper pockets or recesses, helping to keep the probe aligned and results reproducible. Simple operation and clear interpretation of results The analogue nonius system is straightforward: the main scale gives the base reading while the vernier adds the precise fraction, here 0.05 mm increments. For workshop staff familiar with vernier instruments, this arrangement is quick to use and avoids electronic failure modes. For those new to mechanical verniers, the method is easy to learn and offers a tactile sense of proper contact force, which supports controlled and repeatable depth measurements without overreliance on electronic aids. For workshop procurement or technical questions about the Metav IndustryLine depth gauge, contact Metav Werkzeuge in Emmerich for tailored advice and supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M204.054 GTIN: 4054469102627 Standard: DIN 862 Type: Analogue depth gauge with adjustable hook Facts Measuring range: 0–200 mm Bridge: 100 mm Graduation: 0.05 mm (nonius 1/20 mm) Weight: 0.16 kg Special features Material: stainless steel Scale and vernier matt-chromed Analogue vernier reading Designed for workshop and machine‑shop use FAQ How accurate is the Depth Gauge with Adjustable Hook M204.054? The instrument provides a vernier resolution of 0.05 mm and complies with DIN 862, giving workshop‑level accuracy suitable for standard quality checks. Is this depth gauge suitable for everyday machine‑shop tasks? Yes—with a 200 mm measuring range and robust stainless‑steel construction, the gauge is intended for routine measurements in machining and metalworking environments. How is the vernier read on this analogue gauge? The main scale gives whole millimetres and partial millimetres while the vernier provides the additional 0.05 mm step; once aligned, the vernier line that matches the main scale indicates the fine fraction. What advantages does the adjustable hook provide? The adjustable hook allows the gauge to reach and reference recessed or stepped surfaces more easily, improving versatility when measuring pockets or internal depths. Which materials is the gauge designed to withstand in workshop conditions? Constructed from stainless steel with matt‑chromed scale and vernier, the gauge resists corrosion and retains legibility in typical workshop atmospheres. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Depth Gauge With Removable Probe And Interchangeable Rod 0.02mm Nonius, Supplied In Case - Metav IndustryLine
Take advantage of a stainless steel construction, DIN 862 conformity and a 0.02 mm vernier resolution for reliable, repeatable depth measurement in everyday workshop use; order directly via Metav Werkzeuge or consult the team for application advice. Depth gauge with probe tip and removable measuring rod — 200 mm range, 0.02 mm vernier (Metav IndustryLine) The depth gauge with probe tip and removable measuring rod is a precision analogue instrument designed for workshop and inspection tasks where accurate depth readings up to 200 mm are required. Stainless steel body, matt chrome vernier Measuring range up to 200 mm Vernier scale 0.02 mm resolution Conforms to DIN 862 standard Precision that supports consistent production quality This analogue depth gauge uses a finely graduated vernier to provide a resolution of 0.02 mm (1/50 mm), delivering the kind of repeatable measurement needed for routine quality checks and setup tasks. The vernier arrangement follows the conventions of mechanical metrology, making readings clear and verifiable without electronic dependencies. For maintenance and calibration planning, the instrument’s mechanical design keeps drift minimal and makes it straightforward to verify against a gauge block set or transfer standard. Robust materials for daily workshop demands Manufactured from stainless steel with a matt‑chrome finished scale and vernier, the instrument resists corrosion and surface wear, which preserves scale legibility and measuring reliability over time. The combination of corrosion resistance and a compact, lightweight form factor (approx. 0.2 kg) supports comfortable one‑hand operation while remaining durable enough for a production environment. Conformity to DIN 862 ensures the tool meets recognised German metrology practice, easing documentation and inspection procedures. Practical design for specialised depth tasks The supplied probe tip and the removable measuring rod enable measurements in narrow recesses and adaptable depths, so the instrument is suited to tasks from simple recess depth checks to more specialised jigs and fixtures. The tool’s construction balances stiffness and reach, placing it within the standard class for calipers and depth gauges (measuring range up to 200 mm), which is the workshop sweet spot for reach, rigidity and ease of handling. The analogue format avoids battery dependence and provides an immediate, tactile measurement workflow. Contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss this depth gauge and suitable metrology options Technical data Article number: M204.068 GTIN: 4054469164120 Category: Messschieber Numbers / Core technical data Measuring range: 0–200 mm Resolution: 0.02 mm (1/50 mm) Weight: 0.2 kg Standard: DIN 862 Designs / Special features Material: stainless steel with scale and vernier, matt chrome Measuring principle: analogue vernier Probe: fixed probe tip with removable measuring rod Delivery form: protective packaging included FAQ What is the measuring range of this depth gauge? The depth gauge offers a measuring range of 0–200 mm, placing it in the standard class for workshop metrology where reach and stiffness are balanced. How fine is the resolution and what does 1/50 mm mean? Resolution is 0.02 mm, indicated as 1/50 mm on the vernier. This provides mechanical precision suitable for general industrial measurement and workshop inspection. Is the device suitable for corrosive environments? The body is made from stainless steel with a matt‑chrome finish, which improves resistance to corrosion and wear during everyday use. Can the probe tip be adapted for narrow recesses? Yes; the removable measuring rod and probe tip allow the instrument to access narrow or deep recesses for specialised depth measurements. Does the gauge conform to any standards? The instrument is manufactured to DIN 862, ensuring compatibility with common metrological practices and inspection documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Depth Gauge 150mm Base, Stainless Hardened, Digital Display DIN 862 - Metav IndustryLine
Take advantage of high repeatability and easy data capture for faster inspection cycles; the combination of 0.01 mm resolution and hardened stainless construction supports reliable workshop measurements. Order the instrument directly via Metav Werkzeuge or consult our advisors for integration advice. Digital depth gauge M218.045.N – Digital depth gauge, 200 mm range, hardened stainless steel (Metav IndustryLine) The Digital depth gauge M218.045.N is a DIN 862‑compliant digital depth gauge designed for precise depth, step and recess measurements in workshop and inspection environments. 200 mm measuring range for workshop use Hardened stainless construction for durability 0.01 mm digital resolution with ZERO/UNIT/HOLD DIN 862 compliance for standardised results Accurate depth measurement for consistent quality The instrument delivers a 0.01 mm reading resolution, which is the standard for digital calipers and depth gauges used in machine shops and quality control. Compliance with DIN 862 ensures measurements follow recognised tolerances, so depth and step checks become comparable across shifts and suppliers. The imperial resolution of 0.0005 in is available for mixed‑unit workflows. This level of accuracy reduces rework and supports consistent decision making during production and inspection. Robust construction that withstands daily use Built from hardened stainless steel, the depth gauge is engineered for durability and corrosion resistance in workshop conditions. With a 200 mm measuring range it falls into the standard category for general metalworking and engineering tasks, balancing reach with rigidity to limit deflection during single‑handed operation. The moderate weight of 0.6 kg and compact form make handling straightforward while the hardened surfaces maintain long‑term wear resistance, reducing the need for frequent replacement. Digital handling and seamless data capture The digital display features dedicated ZERO, UNIT and HOLD keys plus an ON/OFF control for straightforward operation and rapid switching between metric and imperial units. The integrated RB 5 data output enables connection to counters or data loggers for automated recording, eliminating transcription errors and speeding up inspection protocols. The instrument runs on a 3 V supply, providing reliable power for extended use while keeping electronics simple and serviceable. Practical for workshop inspection and documentation Designed to support routine inspection, the gauge matches the expectations of workshop technicians and quality engineers who require repeatable, traceable measurements. Its construction and standards compliance make it suitable for production sampling, incoming inspection and assembly checks. Where systematic documentation or statistical process control is required, the digital interface and export capability simplify data collection and archiving without adding complexity to everyday operations. Contact Metav Werkzeuge today to discuss the Metav IndustryLine digital depth gauge M218.045.N and secure a workshop‑ready solution with DIN 862 traceability and RB 5 data output Technical data Article number: M218.045.N GTIN: 4054469159751 Brand: Metav IndustryLine Standard: DIN 862 Facts Measuring range: 0–200 mm Resolution: 0.01 mm / 0.0005 in Weight: 0.6 kg Supply: 3 V Special features Material: hardened stainless steel Digital display with ON/OFF, ZERO, UNIT, HOLD Data output: RB 5 Category: digital depth gauge FAQ What measurement accuracy does the gauge provide? The instrument offers a 0.01 mm resolution and meets DIN 862 tolerances; the M218.045.N delivers consistent precision for standard workshop inspections. Is this device suitable for general machine‑shop use? Yes; the 0–200 mm range places it in the standard class for metalworking, making it well suited to production, assembly and incoming inspection tasks. Can measurement data be exported for documentation? Yes; the gauge includes an RB 5 data output for connection to counters, data loggers or inspection software to simplify documentation. What material is used for the gauge and why does it matter? The gauge is made from hardened stainless steel, providing corrosion resistance and wear durability for reliable readings over time. How is the display controlled and powered? Operation is via a digital display with ON/OFF, ZERO, UNIT and HOLD keys; the unit is powered by a 3 V supply for dependable performance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Achieve reliable depth measurement with robust depth calipers
Depth calipers, commonly used for depth measurement and depth gauging, are precision tools designed to determine the depth of blind holes, inner grooves and similar features. These instruments use a slender measuring rod which is inserted into the recess so that the depth can be recorded to the underside of the workpiece with high repeatability.
How depth calipers work and where they belong in the workshop
Primarily constructed from stainless steel, depth calipers resist wear and deformation, ensuring stable accuracy even after prolonged use. The measuring rod is guided by a sled or rail and locked in position to read the distance from the reference face to the deepest point. They are indispensable for checking non-through holes, internal grooves and stepped recesses during machining, assembly and quality control processes.
Clear advantages that improve shopfloor efficiency
- Faster, repeatable checks thanks to a guided measuring rod and clear readout, reducing inspection time and rework.
- Wide selection of measuring ranges and leg lengths — from compact 45 mm legs up to 150 mm legs, and measurement capacities from up to 100 mm up to 300 mm, so the right tool fits each task.
- Choice of analogue or digital models: analogue calipers with vernier offer 0.03–0.08 mm accuracy and battery-free operation; digital models provide 0.01 mm / 0.0005 in resolution and typical accuracy of ±0.03 mm.
- Enhanced functionality on digital variants such as preset start, unit conversion (mm/in), automatic on‑off and models with IP67 protection for use in wet or dusty environments.
- Interchangeable measuring tips (flat, spherical, disc) and specialised hooks or double hooks for grooves increase versatility for complex geometries.
Metav as your precision partner in depth measurement
Metav combines decades of sector expertise with a broad, quality-controlled assortment, acting as a practical single source for precision tools. Based in Emmerich, Metav supplies the european market from a centralised quality filter and has built trust with over 48,000 customers. With more than 250,000 products available, Metav simplifies procurement and helps reduce supplier complexity while ensuring consistent availability.
In short: dependable tools for exact depth measurement
Depth calipers and depth measurement tools offer a straightforward, durable solution for precise depth checks across production and maintenance environments, delivering reliable readings and adaptable functionality for diverse workshop demands.
FAQ
What is the difference between analogue and digital depth calipers?
Analogue depth calipers use a vernier and typically achieve 0.03–0.08 mm accuracy without batteries, making them robust for harsh conditions. Digital depth calipers offer 0.01 mm / 0.0005 in resolution, easy unit switching and extras such as preset functions and automatic on‑off, with typical accuracy of ±0.03 mm.
Can depth calipers be used in wet or dusty environments?
Yes. Some digital depth calipers are rated IP67, providing dust-tight and temporary immersion protection so measurements remain reliable under adverse shopfloor conditions.
Which measuring range should I choose for blind hole inspection?
Select a depth caliper with a measuring range that exceeds the maximum blind hole depth you need to check; compact models suit depths up to 100 mm, while larger calipers cover ranges up to 300 mm. Also consider measuring leg length — common options include 45 mm to 150 mm — to ensure accessibility and stability during measurement.
Are there specialised tips for measuring uneven or grooved surfaces?
Yes. Depth calipers can be fitted with flat, spherical or disc‑shaped tips, and there are designs with single or double hooks or a round depth rail specifically for grooves, enabling accurate contact with irregular or recessed features.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com