Efficient shaft cutters and ball nose cutters for versatile milling
Shaft cutters and ball nose cutters serve as robust rotating tools for roughing, face milling, corner milling and slotting, offering economical replacement of indexable inserts rather than whole solid tools. Available in versions with internal coolant to feed lubricant directly to each cutting edge or without internal coolant relying on external nozzles, these cutters ensure effective chip evacuation and thermal control suited to standard materials or deep pocket and cavity work. By preventing chip re-cutting and protecting cutting edges, they deliver higher feed rates, improved surface finish and extended tool life in demanding metalworking applications.
20mm 90° Solid Carbide End Mill For ADMT 1204 Indexable Inserts, 2 Flutes, 40mm Cutting Length - Teknik Makina
Take advantage of a robust 90° indexable insert solution combined with a 20 mm shank for greater rigidity and a 40 mm cutting length for deeper engagement; order directly via Metav Werkzeuge or consult the team for tailored guidance. Teknik Makina Shank milling cutter S498TM — 90° for ADMT 1204 indexable inserts, 20 mm shank Shank milling cutter S498TM designed for shoulder milling and general face operations with ADMT 1204 indexable inserts, suited to production and workshop environments 90° cutting angle for sturdy shoulder milling 20 mm shank for rigid attachment Compatible with Walter ADMT 1204 inserts 40 mm cutting length for deeper engagement Precision and compatibility for reliable machining The S498TM is built around the efficiency of indexable inserts, a cost-effective concept that separates cutting edges from the tool body. By accepting Walter ADMT 1204 inserts, the cutter allows quick replacement of worn edges without regrinding the tool, reducing machine downtime and lowering lifetime tooling costs. The fixed insert geometry ensures predictable chip formation and surface quality, which supports consistent cycle times and repeatable results in small to medium batch production. This configuration is particularly beneficial where predictable tool life and simple inventory management are priorities. Rigidity and geometry for stable shoulder cuts A 20 mm shank and a 90° cutting angle combine to give the tool the stability required for shoulder milling and face operations. The compact shank diameter increases clamping stiffness, which reduces vibration and improves surface finish when working on castings or machined blocks. With two cutting edges, the cutter balances material removal rate and heat distribution to maintain edge integrity across moderate feeds, supporting consistent part tolerances in standard CNC and milling applications. Fast tool changes and secure clamping Insert retention is handled via a Torx M3x7 screw tightened with a T8 key, enabling secure clamping and quick index changes on the shop floor. The tool’s 120 mm overall length and 40 mm cutting length provide a useful reach while keeping overhang moderate to preserve rigidity. Indexable systems mean operators can maintain productivity: worn inserts can be rotated or replaced within minutes, restoring cutting performance without rebalancing the holder or removing the entire assembly from the spindle. Supply assurance and workshop advantages from a trusted partner Sourcing this cutter through Metav Werkzeuge combines reliable product availability with a practical supply chain: a European quality filter in Emmerich ensures consistent standard checks before dispatch. Metav’s wide offering and established customer base deliver procurement simplicity for workshops and production facilities, making high-precision tooling accessible without compromising on verification or logistics. The combination of a proven insert system and dependable supply reduces procurement complexity and helps maintain production continuity. For expert advice on integrating the Teknik Makina S498TM into production or to arrange prompt delivery from Metav Werkzeuge in Emmerich, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — tailored recommendations and fast dispatch are readily available Technical data Article number: S498TM Brand: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Facts Shank diameter: 20 mm Cutting length: 40 mm Overall length: 120 mm Number of cutting edges: 2 Cutting angle: 90° Weight: 0.275 kg Special features Fits indexable inserts ADMT 1204 Compatible insert manufacturer: Walter Torx screw: M3x7 Torx key size: T8 Intended use: shoulder milling / face milling FAQ Which inserts are compatible with this cutter? The cutter accepts ADMT 1204 indexable inserts; the design is matched to the ADMT 1204 specification for secure seating and predictable geometry. What shank size and overhang are offered? This shank milling cutter features a 20 mm shank with a 120 mm overall length and a 40 mm cutting length for moderate reach while maintaining rigidity. How are the inserts secured? Inserts are clamped using an M3x7 Torx screw; the appropriate key size for mounting and removal is T8. Is this tool suitable for heavy roughing? The tool is optimised for shoulder and face milling with two cutting edges and a 90° cutting angle; it is suitable for many general milling tasks but selection should match the application’s cutting data and machine capability. Who manufactures this cutter and who supplies it? The product is from Teknik Makina and is distributed via Metav Werkzeuge; the SKU for ordering is S498TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Cutter For ADKT 10T3 Indexable Inserts With Internal Coolant, L100mm - Teknik Makina
Take advantage of precise, stable machining with a compact design: the 20 mm shank and internal coolant combine rigidity and thermal control for consistent results, while compatibility with ADKT 10T3 indexable inserts ensures quick tool changeovers. Order directly via Metav Werkzeuge or consult our specialists for seamless integration into the production line. Indexable End Mill S077TM (20 mm shank) by Teknik Makina — internal coolant, for ADKT 10T3 Indexable End Mill S077TM engineered for secure clamping and coolant-fed machining with ADKT 10T3 indexable inserts, suitable for workshop and production environments 20 mm shank for stable tool clamping Internal coolant for effective chip evacuation Compatible with ADKT 10T3 inserts (Korloy) Three cutting edges, 35 mm cutting length Maximise rigidity and thermal control for reliable milling A compact tool geometry with a 20 mm shank and a total length of 100 mm delivers a high degree of rigidity at the toolholder interface, reducing chatter and improving surface finish in interrupted and continuous milling operations. The integrated internal coolant supplies coolant directly to the cutting zone, which reduces heat build-up, improves insert life and supports consistent cutting conditions. By pairing this cutter with ADKT 10T3 indexable inserts, the system combines economical insert replacement with maintained process stability. Short cutting length and multiple edges for efficient material removal With a 35 mm cutting length and three cutting edges, the cutter balances metal removal rate and tool life: the multi-edge configuration spreads cutting forces across several teeth, lowering individual edge load and smoothing chip flow. The modest cutting length preserves stiffness while enabling modest stepovers and pocketing operations where rigidity is critical. The result is predictable productivity gains and reduced rework thanks to steady dimensional performance and predictable wear behaviour. Fast insert changes and workshop compatibility The tool uses standard screw fixation (Torx T8, screw M2.5x5.5) for secure and repeatable clamping of inserts, enabling quick exchange during shift changes and minimising downtime. Compatibility with Korloy ADKT 10T3 inserts offers access to a wide range of grades and geometries, allowing adaptation to different materials and cut conditions without replacing the body. The cutter’s compact mass (approx. 0.25 kg) and standard shank diameter facilitate use in common toolholders and CNC spindle interfaces, making it a flexible choice for many machining centres. For reliable integration or tailored advice on Teknik Makina’s 20 mm indexable end mill S077TM, contact Metav Werkzeuge for supply and technical guidance from Emmerich: info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: S077TM Manufacturer: Teknik Makina Product: Indexable insert end mill Core technical data Diameter: 20 mm Shank diameter: 20 mm Total length: 100 mm Cutting length: 35 mm Number of cutting edges: 3 Weight: 0.25 kg Torx key: T8 Torx screw: M2.5x5.5 Special features Internal coolant For ADKT 10T3 indexable inserts Compatible insert manufacturer: Korloy FAQ Which inserts fit this cutter? This cutter accepts ADKT 10T3 indexable inserts; the body is compatible with Korloy-manufactured inserts in that size. Is the cutter coolant-fed? Yes, the tool features internal coolant, which supplies cutting fluid directly to the insert zone for improved thermal control and chip evacuation. What is the shank diameter and overall length? The tool has a 20 mm shank diameter and a 100 mm overall length. How many cutting edges does the tool have and what is the cutting length? The cutter is configured with three cutting edges and a 35 mm cutting length. Which screw and key are required for insert clamping? Insert clamping uses a Torx T8 key and screws sized M2.5x5.5. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Cutter For ANHX 1004-1206 Indexable Inserts 2 Flutes, 30mm Cutting Length, 100mm Overall Length - Teknik Makina
Take advantage of a compact, indexable-insert cutter that combines firm clamping with a long effective cutting reach; the design delivers consistent chip control and reliable repeatability across series production. Order directly via Metav Werkzeuge or consult the Metav specialists for process-matched recommendations. Shank Cutter S776TM – Indexable-insert cutter, 20 mm shank, 30 mm cutting length (Teknik Cutting Tools) The Shank Cutter S776TM is a robust cutter body designed for milling with ANHX-series indexable inserts; it suits light to medium-duty roughing and finishing tasks in workshop and production settings. 20 mm shank diameter for secure clamping 30 mm effective cutting length Compatible with ANHX 1004-1206 inserts Torx fixing screw M3x7 with T8 key Stable clamping for repeatable results The central benefit of a 20 mm shank diameter is improved toolholder stability. A stiffer connection between spindle and tool significantly reduces vibration, which leads to more consistent surface finishes and longer insert life. The cutter's design keeps the insert seat rigid so that each pass maintains geometry; when paired with high-quality holders, the result is repeatable production rather than occasional rework. Efficient machining with an indexable system Equipped for ANHX 1004-1206 indexable inserts, the cutter enables rapid insert changes and predictable cutting behaviour. The two-flute configuration with a 90° cutting angle provides a balance between chip evacuation and axial engagement, so material removal remains efficient without excessive radial loading. For operations where setup time and tool-change speed matter, this approach reduces non-productive time and supports consistent cycle times. Practical compatibility and straightforward service Compatibility with inserts from Palbit and the supplied Torx fixing arrangement (screw M3x7, key T8) simplifies procurement and maintenance. The fixing system is familiar to workshop technicians and allows secure clamping of the insert with minimal torque. Regular inspection and correct screw torque restore clamp integrity quickly, offering low-maintenance uptime and predictable performance per shift. Designed for workshop-to-light-production environments With an overall length of 100 mm and a compact mass of 0.247 kg, the tool body is sized for flexible use in smaller spindles and manual setups as well as automated cells. The 30 mm cutting length grants a comfortable axial reach for stepped pockets and shoulder milling while keeping deflection low. For shops consolidating tool inventories, the indexable approach reduces total tooling costs by extending insert life and simplifying regrinding needs. Why this cutter benefits process planners By combining a stiff shank, an indexable-insert concept and straightforward fixing hardware, the configuration favours predictable machining results and easier tool management. Process engineers will value the ability to standardise on a cutter body that accepts widely available ANHX inserts, which streamlines stockkeeping and shortens procurement lead times. For tailored advice and procurement support from Metav Werkzeuge—rely on our specialists in Emmerich to match the S776TM to the machining task and to supply inserts or holders that suit the application. Technical data Article number: S776TM Manufacturer: Teknik Makina Brand: Teknik Cutting Tools Compatible inserts: ANHX 1004-1206 Indexable Inserts Suitable insert maker: Palbit Facts Shank diameter: 20 mm Cutting length: 30 mm Overall length: 100 mm Number of cutting edges: 2 Weight: 0.247 kg Cutting angle: 90° Special features Torx fixing screw M3x7 Torx key size T8 For ANHX 1004 inserts Indexable-insert cutter body Compact, production-capable design FAQ What insert types fit this cutter? The cutter accepts ANHX 1004-1206 indexable inserts; compatibility is stated for ANHX 1004 series and extended sizes in the ANHX family. Is the shank diameter suited to standard collets and holders? Yes, the 20 mm shank diameter matches common 20 mm toolholders and collets, providing secure clamping for improved stability. How is the insert secured in the cutter body? Inserts are retained with a Torx fixing screw M3x7; the required key is T8, enabling quick and secure insert changes. Can this cutter be used for finishing operations? With its two-flute geometry and 90° cutting angle, the cutter is suitable for light finishing as well as roughing, depending on cutting data and insert grade. Which manufacturers supply compatible inserts? Palbit is listed as a compatible insert manufacturer; the cutter is designed to work with ANHX-format inserts from established suppliers. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Cutter For APKT 1003 Indexable Inserts With Internal Coolant, 3 Flutes - Teknik Makina
Take advantage of the combination of reliable coolant feed, a rigid 20 mm shank and compatibility with APKT 1003 indexable inserts for steady productivity and low operating costs. Order this coolant-fed cutter body directly via Metav Werkzeuge or contact our specialists for tailored advice. Schaftfräser – shank milling cutter body with internal coolant, 20 mm shank (Teknik Makina) The Schaftfräser is a shank-mounted milling cutter body designed for use with APKT 1003 indexable inserts, engineered for workshop and light industrial milling where quick insert changes and coolant-fed cutting improve process stability. 20 mm shank diameter Internal coolant supply Compatible with APKT 1003 inserts Three cutting edges for stable cutting Improved tool life and surface quality through internal coolant The integrated internal coolant channel directs cutting fluid precisely to the cutting zone, reducing heat build-up and flushing chips away from the insert edge. This targeted cooling lowers thermal stress on the insert and cutting body, which results in longer insert life and more consistent surface finishes across batches. For shops aiming to reduce unplanned downtime, the coolant feed is a measurable enhancement: fewer thermal tool failures and a reduced need for early index changes translate into improved machine availability and predictable production output. Rigid shank and secure clamping for accurate, vibration‑resistant cuts A 20 mm shank combined with an overall length of 120 mm and a cutting length of 40 mm gives the tool a balanced stiffness-to-reach ratio. The three cutting edges contribute to smooth chip load distribution, reducing chatter and improving dimensional stability. Insert retention is secured with an M2.5x5.5 screw tightened with a Torx T8 key, ensuring consistent seating of APKT 1003 indexable inserts from manufacturers such as Korloy. The low mass (approx. 0.278 kg) further aids tool handling and changeover, making the cutter body practical for both short runs and repetitive production cycles. Economical, workshop-friendly design for efficient insert milling The indexable-insert concept keeps running costs low: worn edges are quickly rotated or replaced instead of replacing the whole cutter head, which yields immediate cost benefits for small and medium-sized workshops. The cutter body is intended for rapid insert changes and repeatable mounting, supporting lean workflows and reduced setup time. Supplied as a purpose-built tool body by Teknik Makina and identified as S166-1TM, it fits into existing tool holders for conventional milling machines and offers straightforward integration into standard machining processes. For complex material questions or process optimisation, technical assistance is available via Metav Werkzeuge to support selection and application. Contact Metav Werkzeuge today to request further technical details on Teknik Makina’s coolant-fed cutter body S166-1TM or to discuss matching APKT 1003 inserts for a reliable production setup — Metav Werkzeuge provides expert advice and fast supply from Emmerich. Technical specifications SKU: S166-1TM Product type: Shank milling cutter body Brand: Teknik Makina Facts Cutter diameter: 20 mm Shank diameter: 20 mm Overall length: 120 mm Cutting length: 40 mm Number of cutting edges: 3 Weight: 0.278 kg Special features Internal coolant For APKT 1003 indexable inserts Compatible insert manufacturer: Korloy Insert screw: M2.5x5.5 Torx key size: T8 FAQ What insert types fit this cutter body? The cutter body accepts APKT 1003 indexable inserts, which are widely available and compatible with the S166-1TM from Teknik Makina. Is internal coolant supplied through the shank? Yes, the S166-1TM features an internal coolant channel that delivers fluid directly to the cutting zone to improve tool life and surface finish. Which torque tool is required for insert mounting? An appropriate Torx T8 key is required to tighten the M2.5x5.5 insert screw used with this cutter body. Is this tool suitable for short overhang applications? With a 20 mm shank and an overall length of 120 mm, the cutter body offers good rigidity for moderate overhangs while maintaining stability for accurate milling. Can Korloy inserts be fitted without modification? Yes, the tool is designed for compatibility with Korloy APKT 1003 inserts and standard mounting hardware as specified. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Cutter for APMT 11T3 Indexable Inserts With Internal Coolant, 30mm Cutting Length - Teknik Makina
A robust, indexable shank milling cutter offering internal coolant and a 20 mm shank for stable clamping; its compatibility with APMT 11T3 inserts and Korloy tooling provides a flexible solution for heavy-duty face and shoulder milling. Order the cutter directly via Metav Werkzeuge or consult the technical team for application-specific guidance. Shank milling cutter for APMT 11T3 indexable inserts — 20 mm shank, internal coolant (Teknik Makina) The shank milling cutter for APMT 11T3 indexable inserts is designed for industrial face and shoulder milling where tool stability and effective cooling are essential *Compatibility with APMT 11T3 inserts *20 mm shank for rigid clamping *Internal coolant channels for chip evacuation *Torx T8 screw connection M2.5x5.5 Improved machining stability for consistent surface quality The tool body features a 20 mm shank and a compact cutting head that together reduce deflection during interrupted cuts, resulting in a more consistent surface finish and longer insert life. The robust interface and precise seating ensure repeatable clamping forces, which is especially valuable when milling shoulder faces or heavy engagement passes. Engineers and production planners benefit from predictable performance and fewer reworks thanks to the cutter’s structural design and balance. Optimised cooling and chip flow for higher productivity Equipped with internal coolant, coolant is delivered directly to the cutting zone for improved heat control and efficient chip evacuation. This targeted cooling reduces thermal wear on the inserts and helps maintain cutting-edge geometry under sustained loads. For workshops aiming to increase cycle time reliability, the internal coolant reduces the need for frequent tool changes and supports more stable cutting parameters in medium- to high-feed operations. Secure assembly and straightforward maintenance The cutter uses a Torx T8 screw and an M2.5x5.5 fastener for insert retention, providing a secure, repeatable clamp that simplifies insert changes and reduces set-up time. The indexable design accepts APMT 11T3 inserts supplied by Korloy, allowing immediate replacement without regrinding. Maintenance routines become quicker and less error-prone, supporting continuous production and lowering downtime associated with complex fastening systems. Versatile compatibility for workshop flexibility With a design focused on industrial milling tasks, the body accepts standard APMT 11T3 inserts from Korloy and others, enabling easy integration into existing tool inventories. The combination of a 20 mm shank, 210 mm overall length and a compact cutting head makes the tool suitable for a range of milling fixtures and machine spindle interfaces. For procurement teams, this compatibility reduces the number of special tools required and simplifies spare-part management. For technical specification advice or to secure Teknik Makina indexable milling cutters with internal coolant, contact Metav Werkzeuge for tailored recommendations and order placement. Technical data SKU: S234-1TM Product type: Shank milling cutter Manufacturer: Teknik Makina Core specifications Diameter: 20 mm Total length: 210 mm Shank diameter: 20 mm Cutting length (shank): 30 mm Number of cutting edges: 2 Weight: 0.523 kg Special features Internal coolant channels Compatible with APMT 11T3 indexable inserts Insert supplier: Korloy Torx key: T8 Torx screw: M2.5x5.5 FAQ What inserts does this milling cutter accept? The cutter accepts APMT 11T3 indexable inserts; compatibility has been verified with Korloy inserts for consistent fit and performance. Is the coolant internal or external? The body is equipped with internal coolant channels that deliver cutting fluid directly to the cutting edge for improved heat control and chip evacuation. What is the shank diameter and overall length? The tool has a 20 mm shank and a total length of 210 mm, providing stable clamping and sufficient reach for many milling setups. How many cutting edges does the tool have? The milling body is configured with two cutting edges, designed to balance material removal rate and surface quality for face milling operations. Which fastener standard secures the inserts? Inserts are secured using a Torx T8 connection with an M2.5x5.5 screw for reliable mechanical clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Cutter for BOMT 1304 Indexable Inserts With Internal Coolant, 150mm - Teknik Makina
Take advantage of the combination of rigid 20 mm shank stability, targeted cooling at the cutting edge, and compatibility with BOMT 1304 inserts for consistent, high-quality milling results — order directly via Metav Werkzeuge or consult our specialists for application advice. Shank milling cutter for BOMT 1304 indexable inserts — 20 mm shank, internal coolant (Teknik Makina) Shank milling cutter designed as an indexable-insert milling solution for precise CNC face and slot operations, compatible with BOMT 1304 inserts and engineered for secure clamping and coolant-fed performance. 20 mm shank diameter Internal coolant supply Compatible with BOMT 1304 inserts Includes T10 Torx screw M3.5x8.5 Increased rigidity for repeatable machining and reduced runout The tool's 20 mm shank combined with a 150 mm overall length delivers a balance between reach and rigidity that supports repeatable machining cycles. A stiffer shank reduces vibration and runout, which in turn helps to maintain insert geometry and surface integrity on the workpiece. For production environments where consistent tolerance adherence matters, the robust shank dimension translates directly into fewer scrap parts and more predictable tool life. The compact mass of 0.356 kg keeps toolholder loads moderate while supporting reliable spindle dynamics. Fast insert changes and secure clamping to keep downtime low Designed for BOMT 1304 inserts and accepted by Ingersoll systems, the cutter uses a proven indexable-insert concept that separates cutting edge expenditure from the tool body. The two cutting edges and the 40 mm cutting length enable effective material engagement with reduced cutting forces per tooth. Clamping is secured with a T10 Torx drive and M3.5x8.5 screw, providing a straightforward and repeatable tightening procedure; spare screws and the specified Torx key simplify maintenance. This configuration shortens tool-change intervals and limits operator time spent at the machine, improving overall equipment effectiveness. Coolant-fed cutting for extended insert life and improved surface finish The integrated internal coolant channel supplies cutting fluid directly to the insert seat and cutting edge, which assists chip evacuation and reduces thermal loading on the carbide grade. Direct cooling helps to prevent premature insert wear and to maintain consistent cutting geometry over longer cycles, supporting better surface finishes and tighter tolerances. For mixed-shop environments where switching between roughing and finishing passes is common, the coolant-fed design offers process reliability and reduces the frequency of unscheduled maintenance. Practical compatibility and workshop integration This milling solution arrives as a ready-to-fit shank tool that aligns with standard indexable-insert workflows. The tool body integrates with common tooling systems and is suitable for use in serial production and job-shop contexts where fast insert replacement and reliable clamping matter. Documentation on insert orientation and screw torque should be followed to ensure optimal performance. For technical clarifications on insert grades, clamping torque or specific machining strategies, advisory support is available. Contact Metav Werkzeuge for availability and tailored application advice on this Teknik Makina shank milling cutter — eMail info@metav-werkzeuge.com or call +49 2822 7131930 for concise technical support and next-step ordering. Technical data Article number: S851-1TM SKU: S851-1TM Manufacturer: Teknik Makina ECLASS: 21180806 Label: 20mm Schaftfräser BOMT 1304 L150mm mit Innenkühlung Data Diameter: 20 mm Overall length: 150 mm Shank diameter: 20 mm Cutting length: 40 mm Number of cutting edges: 2 Weight: 0.356 kg Torx key: T10 Torx screw: M3.5x8.5 Special features Internal coolant supply Compatible with BOMT 1304 indexable inserts Insert manufacturer compatibility: Ingersoll Indexable-insert system for fast tool changes Designed for CNC face and slot milling FAQ What insert type does this cutter accept? The cutter accepts BOMT 1304 inserts, a widely used indexable insert format compatible with the specified clamping screw and seat geometry. Is the tool coolant-fed and what advantage does that provide? Yes, the tool features internal coolant, which directs fluid to the cutting zone to improve chip evacuation, reduce heat at the insert and extend insert life. Which shank diameter and overall length are provided? The tool is supplied with a 20 mm shank and 150 mm overall length, offering a compromise between reach and stiffness for stable machining. How are the inserts secured and what drive is required? Inserts are secured with a M3.5x8.5 screw tightened using a T10 Torx driver, ensuring repeatable clamping and straightforward maintenance. Is this tool compatible with Ingersoll inserts? The tool is compatible with inserts supplied by Ingersoll when the BOMT 1304 geometry is specified by the insert manufacturer. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Cutter For LNMT 0804 Indexable Inserts With 3 Flutes, 40mm Cutting Length - Teknik Makina
Take advantage of precise machining and secure clamping with a compact design that suits indexable-insert applications; the 20 mm shank and 40 mm cutting length deliver stability and effective cutting, while compatibility with LNMT 0804 inserts and ISCAR systems keeps tool setups simple. Order the S299TM directly via Metav Werkzeuge or ask our consultants if needed. S299TM shank cutter — 20 mm shank, 3‑flute milling tool (Teknik Makina) A robust S299TM shank cutter engineered for milling operations with LNMT 0804 indexable inserts, designed to combine reliable clamping with efficient material removal in workshop and production environments 20 mm shank for stable clamping 40 mm effective cutting length Designed for LNMT 0804 indexable inserts Compatible with ISCAR inserts and M2.5 screw Stable clamping for repeatable results The tool is built around a 20 mm shank, which provides a secure fit in standard toolholders and reduces runout. This stability translates into predictable cutting behaviour and consistent tolerances across serial production. With a 3‑flute geometry, the cutter balances chip evacuation and engagement to maintain tool life while sustaining surface quality. The combination of a rigid shank and optimised flute count reduces vibrations and helps maintain dimensional accuracy during longer passes. Efficient cutting with indexable inserts Designed specifically for LNMT 0804 indexable inserts, the cutter accepts established insert geometries to offer a cost‑effective approach to finishing and semi‑roughing. The 40 mm cutting length allows effective material contact for many common milling tasks, while the Torx fastening (M2.5x7 with T8 key) ensures reliable insert clamping and quick index changes. Using industry‑standard inserts such as those from ISCAR reduces tooling inventory complexity and makes it easier to match grades and chipbreakers to the workpiece material, improving process control and throughput. Practical workshop integration and low handling effort With an overall length of 120 mm and a weight of approximately 0.313 kg, the cutter integrates smoothly into existing tool sets without adding unnecessary bulk. Quick insert changes and a familiar fastening system support fast maintenance routines, reducing machine downtime. The tool’s straightforward interface with common toolholders and inserts helps streamline tooling management, allowing production planners to concentrate on cycle time and surface finish rather than special fixtures or bespoke tooling solutions. For reliable milling with LNMT 0804 inserts, contact Metav Werkzeuge for tailored advice and order handling — Metav Werkzeuge supports fast, transparent delivery from Emmerich to the workshop. Technical data Article number: S299TM Product name: Schaftfräser for LNMT 0804 Indexable Inserts Manufacturer: Teknik Makina Core dimensions Shank diameter: 20 mm Cutting length: 40 mm Overall length: 120 mm Weight: 0.313 kg Number of flutes: 3 Versions & compatibility For LNMT 0804 indexable inserts Compatible insert supplier: ISCAR Fastening screw: Torx M2.5x7 Torx key size: T8 FAQ What inserts does this cutter accept? The S299TM shank cutter is designed for LNMT 0804 indexable inserts; it is compatible with standard grades and geometries used for this insert format. Is the tool compatible with ISCAR inserts? Yes, the cutter is listed as compatible with ISCAR inserts and accepts the LNMT 0804 insert type used by that supplier. Which fastening hardware is required for insert changes? Insert clamping uses a Torx screw (M2.5x7) with a T8 key, enabling quick and secure insert replacement. What shank size and overall length does the tool have? The shank diameter is 20 mm and the overall length is 120 mm, providing a compact, stable tool suitable for many standard toolholders. What advantages does the 3‑flute geometry provide? The 3‑flute layout offers a balance between chip evacuation and cutting engagement, supporting consistent surface finish and extended insert life in many milling applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Cutter For LNMU 0303 Indexable Inserts With Internal Coolant, 150mm Overall Length - Teknik Makina
Combine the rigidity of a 20 mm shank, internal coolant and compatibility with LNMU 0303 indexable inserts to maintain consistent cycle times and extend insert life; order the cutter directly via Metav Werkzeuge or consult our specialists for application advice. 20 mm Shank Milling Cutter for LNMU 0303 Indexable Inserts – Internal Coolant, L150 mm Shank milling cutter for LNMU 0303 indexable inserts designed for stable, repeatable milling in general machining and finishing operations 20 mm shank diameter for stable clamping Integrated internal coolant for efficient chip evacuation Compatible with LNMU 0303 indexable inserts 150 mm overall length for extended reach Improved accuracy through a rigid shank and balanced geometry A robust 20 mm shank and carefully balanced body deliver reduced runout and high concentricity, which translates into more consistent surface finishes and tighter tolerances during milling. The tool’s three cutting edges distribute cutting forces evenly, lowering vibration and improving tool life. For manufacturing environments where repeatability matters, this stability reduces scrap rates and rework, while also enabling more predictable feed and speed settings on CNC milling heads. Internal coolant and chip control that protect inserts and workpieces The integrated internal coolant supplies lubricant directly to the cutting zone, improving heat management and flushing chips away from the cutting edge. This targeted cooling reduces thermal wear on indexable tips and helps maintain cutting-edge integrity under continuous operation. As a result, replacement intervals are extended and downtime for insert changes is reduced, contributing to a more economical machining cycle and fewer interruptions on production lines. Simplified insert changes and wide compatibility for production continuity Compatibility with LNMU 0303 indexable inserts and endorsement for use with Tungaloy inserts make the cutter versatile across common insert grades. Fast securement via the M2.5x7 screw and access with a T8 Torx key enable swift insert changes and straightforward service routines at the machine. With a 150 mm overall length and 50 mm cutting length, the design supports deeper engagement while keeping the clamped shank as rigid as possible. The result is a practical balance between reach and stiffness that suits batch production and small-series work alike. For tailored technical advice or to secure supply of this Teknik Makina shank milling cutter from Metav Werkzeuge, contact our Emmerich specialists who can confirm suitability and delivery times Technical data SKU: S673-1TM Type: Shank milling cutter for indexable inserts Manufacturer: Teknik Makina Dimensions & core data Shank diameter: 20 mm Overall length: 150 mm Cutting length (shank): 50 mm Number of cutting edges: 3 Weight: 0.381 kg Screw: M2.5x7 Torx key: T8 Features & compatibility Internal coolant Compatible with LNMU 0303 indexable inserts Compatible insert manufacturer: Tungaloy Category: Shank cutters FAQ Which insert type fits this cutter? The cutter accepts LNMU 0303 indexable inserts; it is configured for standard insert geometry used by Tungaloy and similar suppliers. Is internal coolant supplied through the shank? Yes, the tool features internal coolant delivery routed to the cutting zone for improved chip evacuation and thermal control. How is an insert secured and what tool is required? Inserts are fixed with an M2.5x7 screw accessed using a T8 Torx key, allowing quick and secure insert replacement. What machining tasks is this cutter best suited to? With its rigid 20 mm shank and three cutting edges, the tool is suitable for medium-duty face milling and shoulder milling where repeatability and surface finish are priorities. Can Tungaloy inserts be used reliably with this cutter? Yes, the cutter is listed as compatible with Tungaloy inserts and works with established LNMU 0303 grades for a wide range of materials. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Cutter For LNMX 1006 Indexable Inserts 3 Flutes 25mm Cutting Length, 90° - Teknik Makina
Take advantage of a compact, indexable insert holder that combines stable clamping, swift insert changes and broad compatibility for efficient milling operations; order directly via Metav Werkzeuge or consult our specialists for application advice. Shank milling cutter LN100TM (20 mm) by Teknik Makina — for LNMX indexable inserts The Shank milling cutter LN100TM is a precision milling holder designed to accept LNMX indexable inserts for reliable face and slot milling in metalworking and production environments. 20 mm shank diameter for stable clamping Compatible with LNMX 1006 indexable inserts Three cutting edges for efficient material removal Quick insert change via M3x7 Torx screw Stable clamping and consistent cutting quality for series work A robust holder construction delivers reduced runout and predictable cutting performance. The 20 mm shank provides secure clamping in common toolholders and is engineered to maintain concentricity during medium-to-heavy milling cycles. Compatibility with LNMX 1006 indexable inserts means the cutting geometry is defined by industry-standard inserts, allowing tool life and grade selection to be adapted to the workpiece material. The 90° cutting angle yields a reliable face contact for flat surfaces and shoulders, while the overall balance—at roughly 0.285 kg—supports steady spindle dynamics during continuous operation. Faster cycle times through quick insert changes and efficient geometry Operational efficiency is supported by the simple clamping mechanism: replacement inserts are fastened with an M3x7 Torx screw tightened with a T8 key, so downtimes for insert changes are minimised. The holder accepts inserts that present multiple cutting edges in sequence; together with the three cutting edges on the head, this configuration reduces tool-change frequency and keeps machining uninterrupted. The accessible mounting interface is suited to workshop workflows where repeatable, fast insert indexing is required, translating into measurable productivity gains on batch and single-part runs. Versatile use and easy integration with common insert brands Designed for use with Korloy and other LNMX-compatible insert families, the toolholder integrates smoothly into existing tooling suites. The 120 mm overall length and a cutting reach of 25 mm give sufficient reach for face milling and shallow slotting without excessive overhang. Because the head accepts indexable inserts, the operational philosophy is cost-effective: worn edges are indexed rather than replacing an entire solid tool, which lowers consumable costs and simplifies stockkeeping. The holder’s geometry and standardised fixing method make it straightforward to specify when configuring modular tool assemblies for production lines. For technical clarification or to arrange supply from Metav Werkzeuge — leveraging our Emmerich quality filter and fast logistics — contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for personalised advice and order support Technical data Article number: LN100TM Manufacturer: Teknik Makina Product type: Shank milling cutter (indexable insert holder) Intended inserts: LNMX 1006 Compatible insert brand: Korloy Fixing screw: M3x7 Torx Core data Shank diameter: 20 mm Number of cutting edges: 3 Overall length: 120 mm Cutting length (shank side): 25 mm Weight: 0.285 kg Cutting angle: 90° Special features For LNMX indexable inserts M3x7 Torx screw; T8 key required Designed for face and slot milling tasks Supplied as holder only; inserts sold separately FAQ Is this holder compatible with standard LNMX inserts? The holder is specified for LNMX 1006 inserts and is compatible with LNMX-grade indexable inserts from Korloy and other manufacturers that match the LNMX 1006 form. Which toolholder or boring bar accepts the 20 mm shank? The 20 mm shank is intended for toolholders and adaptors that accept metric 20 mm shanks; compatibility should be confirmed against the machine’s tool clamping system and the required overhang. How is the insert secured in the cutting head? Inserts are fastened with an M3x7 Torx screw; an appropriate T8 key must be used to achieve the correct clamping torque and secure the insert reliably. What machining tasks suit this holder best? The holder is suited for face milling and shallow slotting where LNMX 1006 inserts provide the required cutting geometry and grade—typical for production and jobbing environments. Are inserts included with the holder LN100TM? The LN100TM is supplied as the shank milling cutter (holder) only; LNMX 1006 inserts must be ordered separately to match the required grade and application. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Cutter For RPMW 10T3 Indexable Inserts, M3.5x7 Torx Screw - Teknik Makina
Take advantage of a stable Ø20 mm shank and two cutting edges to speed up insert changes and maintain consistent results on the shop floor. The combination of precise clamping, indexable RPMW 10T3 compatibility and robust construction supports uninterrupted production — order directly via Metav Werkzeuge or consult the team for application advice. Insert Milling Cutter R316TM — for RPMW 10T3 indexable inserts with Ø20 mm shank The Insert Milling Cutter R316TM is a shank-mounted milling tool engineered for use with Korloy RPMW 10T3 indexable inserts, offering a compact 120 mm overall length for accurate tool projection in machining centres Shank Ø20 mm for secure toolholder fit Compatible with RPMW 10T3 indexable inserts Two cutting edges for efficient material removal Torx screw M3.5×7 with T15 key for fast clamping Stable shank and compact length for repeatable machining The solid Ø20 mm shank and 120 mm overall length provide a compact, rigid setup that reduces vibration and improves repeatability during milling cycles. A shorter tool projection keeps the cutting geometry stable, which translates into consistent surface finishes and reduced tool wear. For operations where clamping reliability and predictable runout matter, this shank-mounted design supports dependable toolholder engagement and easier set-up checks on the machine spindle. Indexable insert system for economical tool management Designed for the RPMW 10T3 insert family, the cutter accepts widely available indexable inserts, enabling quick replacement of cutting edges without regrinding or complex reconditioning. The insert-based approach lowers per-cutting-edge costs and minimises machine downtime: when one edge is worn, the insert is indexed or replaced, restoring cutting performance immediately. This practical strategy supports high utilisation of milling assets and simplifies stockkeeping of consumables. Secure fastening and straightforward maintenance Fastening is handled with a Torx M3.5×7 screw and a T15 key, providing positive clamping torque and repeatable seat pressure for each insert. The two cutting edges balance removal rate with stability, making the tool suitable for a range of general-purpose milling tasks where insert economy and quick changeovers are priorities. Routine maintenance is minimal: check seat cleanliness, confirm screw torque, and replace inserts as required to maintain cutting accuracy. Partnered supply and workshop reliability Supplied by Teknik Makina and distributed by Metav Werkzeuge, the cutter is part of a focused range meant to democratise precision in workshops and production facilities. Metav’s inventory and advisory service help integrate the tool into existing machining strategies, offering clear delivery pathways and practical stocking options. For customers seeking straightforward, reliable tooling solutions, this insert cutter supports efficient tooling workflows and predictable production planning. Contact Metav Werkzeuge for tailored application advice on the Teknik Makina R316TM insert milling cutter and access pragmatic supply from Emmerich for fast integration into production Technical data Article number: R316TM Product name: Insert Milling Cutter R316TM Brand: Teknik Makina Facts Diameter: 20 mm Shank diameter: 20 mm Overall length: 120 mm Cutting edges: 2 Special features Compatible inserts: RPMW 10T3 Compatible insert manufacturer: Korloy Torx screw: M3.5×7 Torx key size: T15 SKU: R316TM FAQ What inserts fit this cutter? The cutter accepts RPMW 10T3 indexable inserts; Korloy-made RPMW 10T3 inserts are specified for use with the R316TM. How is the insert secured in place? An M3.5×7 Torx screw secures each insert; the seat is tightened with a T15 key to ensure repeatable clamping. What shank size is required for the toolholder? A toolholder that accepts a Ø20 mm shank is required; the cutter’s Ø20 mm shank ensures a rigid fit in standard collet or shrink-fit systems designed for that diameter. How many cutting edges does the cutter provide? The tool is equipped with two cutting edges, enabling balanced chip removal while keeping the insert change process efficient. Can Metav Werkzeuge advise on integrating the cutter into an existing toolset? Metav Werkzeuge can provide application guidance and stocking advice to help integrate the Teknik Makina R316TM into current tooling strategies. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Cutter For XEKT 1904 Indexable Inserts With Internal Coolant, 200mm Overall Length - Teknik Makina
Deliver consistent machining results thanks to internal coolant and a standard 20 mm shank, paired with compatibility for XEKT 1904 indexable inserts; order the end mill directly via Metav Werkzeuge or consult the in-house specialists for application guidance. 20 mm end mill for XEKT 1904 indexable inserts — L200 mm, internal coolant (Teknik Makina) 20 mm end mill for XEKT 1904 indexable inserts is a long-reach milling arbor with internal coolant designed for industrial metalworking tasks that require quick insert changes and reliable chip control. Internal coolant for improved tool life 20 mm shank for standard holders Compatible with XEKT 1904 Korloy inserts 200 mm overall length, 61 mm cutting reach Torx T15 fastening with M4x8.5 screw Run-to-run consistency with indexable inserts The combination of a standard 20 mm shank and an indexable insert system provides a cost-effective approach to machining where repeatable geometry is essential. The insert seat accepts XEKT 1904 style cutters, allowing a rapid exchange of the cutting edge without regrinding. This reduces non-productive time and simplifies inventory management, since individual inserts can be stocked independently of the arbor. The result is stable process control and measurable efficiency gains on the shop floor. Cooling at the cutting edge for longer tool life An integrated internal coolant channel delivers lubricant and coolant directly to the cutting zone, lowering temperatures and improving chip evacuation. Lower thermal load extends insert life and helps maintain dimensional accuracy over longer runs. In applications where heat build-up leads to premature wear, this targeted coolant supply enhances surface finish and reduces the frequency of insert changes, supporting uninterrupted production cycles. Secure clamping and straightforward maintenance The tool is secured with a Torx T15 drive and an M4x8.5 fastening screw for reliable clamping of the single cutting insert. With a 200 mm overall length and a 61 mm cutting reach, the arbor balances accessibility with rigidity for a broad range of milling tasks. The compact mass (approx. 0.412 kg) and standard interface allow quick integration into existing tool holders. Regular servicing is limited to routine insert replacement and torque checks on the fastening screw, keeping downtime to a minimum. Contact Metav Werkzeuge today for tailored advice and to order the Teknik Makina 20 mm end mill with internal coolant (SKU S384TM) — fast dispatch from Emmerich and technical support available for specification matching. Technical Data Article number: S384TM ECLASS: 21180806 SKU: S384TM Core dimensions Shank diameter: 20 mm Overall length: 200 mm Cutting length: 61 mm Weight: 0.412 kg Number of inserts: 1 Features & compatibility Internal coolant: yes Compatible inserts: XEKT 1904 Compatible insert manufacturer: Korloy Torx key: T15 Fastening screw: M4x8.5 Product type: end mill FAQ What insert type does this arbor use? The arbor accepts XEKT 1904 indexable inserts; insert changes are straightforward and fast. Is coolant supplied directly to the cutting edge? Yes — the integrated internal coolant channel supplies fluid to the cutting zone to improve tool life and chip evacuation. Which shank size and overall length are specified? The tool has a 20 mm shank and a 200 mm overall length, with a 61 mm cutting reach. What fastening components are required for assembly? Assembly uses a Torx T15 driver and an M4x8.5 fastening screw supplied with the tool. Can the arbor be used with Korloy inserts? Compatibility is specified for Korloy XEKT 1904 inserts, enabling interchangeability with that insert family. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Cutter For XNEX 0403 Indexable Inserts 3 Flutes, M2.5x7 Torx Screw - Teknik Makina
Benefit from a modular, productivity-focused milling system that combines compatibility with SECO XNEX 0403 indexable inserts, a secure 20 mm shank for stable clamping and quick Torx fastening; order directly via Metav Werkzeuge or consult our specialists for application support. Indexable Milling Cutter S195TM — for XNEX 0403 inserts, 20 mm shank (Teknik Makina) The Indexable Milling Cutter S195TM is a precision cutter body engineered for modular milling with SECO XNEX 0403 indexable inserts, designed to simplify insert changes and maintain consistent machining accuracy in production environments. Compatible with SECO XNEX 0403 inserts 20 mm shank diameter for secure clamping Three cutting edges for stable material removal Torx M2.5×7 screws, T8 key for quick change Increase machining uptime with modular indexable tooling The S195TM cutter body is built around the proven benefits of indexable inserts, allowing rapid edge replacement rather than full-tool changes. The modular concept reduces tool change time and lowers consumable costs while maintaining process stability. With a 20 mm shank and a 150 mm overall length, the holder offers a balanced combination of reach and rigidity, helping to sustain higher metal-removal rates without sacrificing repeatability. For operations seeking predictable throughput improvements, the interchangeable insert system is a practical step towards leaner tooling logistics. Secure fastening and straightforward maintenance for consistent performance Fastening is handled by Torx M2.5×7 screws, tightened with a T8 key, which ensures reliable clamping of the inserts and simplifies service routines. The three-edge configuration delivers an even load distribution across the cutting circle, enhancing stability during peripheral milling. Maintenance cycles are shortened because consumables are limited to the inserts and the Torx screws; the cutter body itself remains in service longer, reducing total cost of ownership. The robust fastening system also reduces the risk of insert movement under intermittent loads. Practical dimensions that suit standard toolholders and setups Key dimensions—20 mm diameter and 150 mm overall length—are chosen for compatibility with common toolholders used in modern workshops and small production lines. The option to use widely available XNEX 0403 inserts from SECO makes sourcing straightforward and supports rapid replenishment. The three cutting edges are optimised for a compromise between cutting efficiency and surface integrity, providing steady chip evacuation and manageable cutting forces for routine machining tasks. Reliable origin and industrial compatibility Manufactured by Teknik Makina, the S195TM is intended for industrial and trade customers who value modularity, repeatability and simplified inventory. The cutter body is designed to pair with standard insert geometries and clamping concepts, enabling seamless integration into established tooling systems. Where process reliability and supply transparency matter, such modular holders contribute to predictable lead times and consistent part quality. Contact Metav Werkzeuge for customised advice on integrating the Teknik Makina S195TM into existing toolsets or to discuss compatible insert options; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S195TM Manufacturer: Teknik Makina Product: Indexable milling cutter for XNEX 0403 inserts Compatible inserts: XNEX 0403 (SECO) Torx screw: M2.5x7 Torx key: T8 Core dimensions Diameter: 20 mm Shank diameter: 20 mm Overall length: 150 mm Cutting edges: 3 eClass: 21180806 ETIM: EC011860 Features & compatibility For XNEX 0403 indexable inserts Secure Torx fastening Suitable for standard toolholders with 20 mm shank SKU: S195TM FAQ Which inserts fit this cutter? The S195TM is compatible with XNEX 0403 indexable inserts from SECO; this pairing enables straightforward procurement and replacement. What are the key dimensions to check for toolholder compatibility? Verify a 20 mm shank capacity and sufficient tool length for a 150 mm overall length when fitting the cutter body to a toolholder. How many cutting edges does the cutter body accommodate? The cutter body is configured for three cutting edges, providing balanced cutting action and consistent chip removal. Which fastening elements are required for insert clamping? Insert clamping uses Torx M2.5×7 screws tightened with a T8 key to ensure secure and repeatable attachment. Who manufactures the cutter body? The cutter body is produced by Teknik Makina and supplied under SKU S195TM for industrial applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Cutter For XNKT 0604 Indexable Inserts With Internal Coolant, 150mm L - Teknik Makina
Take advantage of the combination of rigidity from the 20 mm shank, internal coolant for consistent chip control, and compatibility with industry-standard XNKT 0604 Korloy inserts to maintain steady production and minimise downtime — order via Metav Werkzeuge or consult the team for integration advice. Shank milling cutter for XNKT 0604 indexable inserts — 20 mm shank with internal coolant by Teknik Makina Shank milling cutter for XNKT 0604 indexable inserts designed for precise indexable milling operations where stable clamping and effective cooling improve productivity. 20 mm shank diameter for rigid clamping Internal coolant for improved chip evacuation Compatible with XNKT 0604 Korloy inserts 150 mm overall length with 40 mm cutting length Consistent machining performance through rigid design and coolant This shank milling cutter combines a 20 mm shank with a 150 mm overall length and a 40 mm cutting length to deliver mechanical stability in indexable milling applications. The rigid 20 mm shank minimises deflection under load, which translates into more consistent surface finishes and longer tool life for the cutting system. The tool carries two cutting edges, appropriate for balanced material removal rates while maintaining process reliability. Specified dimensions and geometry help to integrate the cutter into standard holders without unexpected clearance issues. Controlled chip flow and thermal management for longer operating windows Equipped with internal coolant, the tool channels cutting fluid directly to the cutting zone, supporting stable temperatures and controlled chip evacuation. This feature reduces the risk of built-up edge and improves insert life in continuous production. Compatibility with XNKT 0604 indexable inserts from Korloy allows the use of widely available inserts, reducing inventory complexity and enabling quick reconditioning cycles. The internal cooling option is particularly advantageous during extended cuts or when working with tougher materials where thermal control affects cycle time and repeatability. Practical handling, fast indexable changeover and secure fastening The cutter is fitted for secure insert clamping using an M3x7 Torx screw and is serviced with a T8 Torx key for insertion and replacement. These standardised fastenings permit rapid indexable changes, limiting machine downtime during shift changes or maintenance. The tool’s design supports straightforward assembly into common toolholders while the accessible fastening system simplifies routine checks and torque-controlled insert seating. Together, these attributes reduce procedure time and contribute to a dependable production routine. Select the Teknik Makina shank milling cutter for reliable indexable milling and contact Metav Werkzeuge for tailored advice or ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: S834-1TM ECLASS: 21180806 Brand: Teknik Makina Facts Shank diameter: 20 mm Overall length: 150 mm Cutting length: 40 mm Number of cutting edges: 2 Weight: 0.365 kg Special features Internal coolant Compatible with XNKT 0604 indexable inserts Compatible insert manufacturer: Korloy Torx screw: M3x7 Torx key: T8 FAQ Which indexable inserts fit this cutter? The cutter is designed for XNKT 0604 indexable inserts; compatibility with Korloy XNKT 0604 inserts is specified for the Teknik Makina shank milling cutter (SKU S834-1TM). Does the tool require an external coolant supply? Yes, the tool features internal coolant and requires a compatible coolant line in the toolholder to deliver fluid to the cutting zone. How are the inserts secured and what tool is needed? Inserts are fastened with an M3x7 Torx screw and tightened using a T8 Torx key for secure and repeatable clamping. Is the 20 mm shank suitable for standard holders? A 20 mm shank matches common collet and chuck systems intended for this shank size and provides the rigidity expected for indexable milling cutters. How many cutting edges does the cutter have and what does that mean for feed rates? The cutter has two cutting edges, which offers a balance between material removal and surface finish; cutting parameters should be set according to machine capacity and insert recommendations. What is the article number for ordering or reference? The product is listed as SKU S834-1TM, Teknik Makina shank milling cutter for XNKT 0604 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Cutter For XOMX 0602-1204 Indexable Inserts, 3 Flutes 40mm Cutting Length, 90° - Teknik Makina
The combination of a 20 mm shank and a 40 mm cutting length delivers stable, high‑feed machining with precise indexable insert replacement; benefit from reduced cycle times and predictable tool life. Order the cutter via Metav Werkzeuge or contact our consultants for application advice. Schaftfräser S626TM — 20 mm shank, 40 mm cutting length (Teknik Makina) A robust indexable insert milling cutter designed for medium‑to‑heavy milling tasks, suitable for XOMX 0602‑1204 indexable inserts 20 mm shank diameter for high rigidity 40 mm cutting length for extended engagement Compatible with SECO‑style indexable inserts Three cutting edges for efficient material removal Rigid clamping for stable machining and higher feeds With a 20 mm shank diameter and a total length of 120 mm, the tool is engineered to provide mechanical rigidity that reduces vibration and improves surface finish. The larger shank allows the cutter to be held more securely in standard toolholders, which in turn enables higher feed rates and longer uninterrupted spindle runs. Because the mass is modest at 0.297 kg, handling at the machine and index plate changes remain straightforward while maintaining the stiffness required for demanding operations. Cost‑effective productivity using indexable inserts The cutter is designed for use with indexable inserts, allowing rapid insert changes and predictable tool costing. Fitted inserts minimise downtime: when an edge wears, the insert is rotated or replaced rather than the whole tool being discarded. The combination of three cutting edges and compatibility with common insert formats provides a balance between material removal rate and insert economy, reducing per‑part tooling costs while maintaining consistent cut quality across batches. Quick maintenance and secure insert clamping Insert retention is secured with a Torx M2.5x5.5 screw, accessed using a T8 key, which simplifies service and reduces setup time at the machine. This standardised screw format means maintenance can be completed with widely available tools and clear torque procedures, ensuring repeatable seating of the inserts and reliable cutting performance. The cutter’s geometry, with a 90° cutting angle, is intended to produce predictable chip flow and straightforward programming for CAM operations, making it suitable for both workshop and production environments. Versatility across typical milling tasks Although tailored for XOMX 0602‑1204 indexable inserts and compatible insert systems such as those from SECO, the cutter’s overall specification—20 mm diameter, 40 mm effective cutting length, and three flutes—makes it suitable for a range of materials when paired with the appropriate insert grade. The design supports efficient slotting and peripheral milling where a compact, indexable solution is preferred over solid carbide tools for economics and insert flexibility. For application guidance or to request technical clarification about the Teknik Makina S626TM indexable milling cutter, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, expert advice. Technical data Article number: S626TM Manufacturer: Teknik Makina SKU: S626TM Core data Shank diameter: 20 mm Cutting length (shank): 40 mm Overall length: 120 mm Diameter: 20 mm Number of cutting edges: 3 Weight: 0.297 kg Design & features Compatible with XOMX 0602‑1204 indexable inserts Torx screw: M2.5x5.5 Torx key size: T8 Suitable for SECO‑style inserts FAQ What insert types fit this milling cutter? The S626TM is specified for XOMX 0602‑1204 indexable inserts and is compatible with SECO‑style insert formats when the matching seat and clamping parts are used. How is the insert fixed in the cutter? Insert retention on the S626TM is achieved by a Torx screw (M2.5x5.5) tightened with a T8 key to provide secure and repeatable clamping. Is the cutter suitable for heavy milling? The combination of a 20 mm shank and a 120 mm overall length gives the S626TM the rigidity required for medium‑to‑heavy milling when set up correctly in an appropriate holder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm End Mill For 4NKT 0603 Indexable Inserts, 3 Flutes 25mm Cutting Length, 120mm Overall Length - Teknik Makina
Take advantage of the combination of a robust 20 mm shank, reliable compatibility with 4NKT06 indexable inserts and a compact overall length of 120 mm for efficient, repeatable milling operations; order the Teknik Makina shank milling cutter directly via Metav Werkzeuge or consult our specialists for application matching. Teknik Makina Shank Milling Cutter S473TM — Ø20 mm, for 4NKT 0603 Indexable Inserts Teknik Makina Shank Milling Cutter S473TM is a compact shank-mounted milling solution designed for indexable insert milling with short cutting length applications. Shank Ø20 mm for stable clamping Three cutting edges for balanced cutting Compatible with 4NKT06 indexable inserts Torx M3x6.5 screw; key T8 included Consistent removal rates with a compact, rigid design The S473TM is engineered as a shank milling cutter with a 20 mm shank and a total length of 120 mm, offering a compact tool that reduces overhang and improves rigidity. Reduced deflection leads to steadier cutting conditions and consistent surface finish across repeated part runs. The combination of a short cutting length (25 mm) and a rigid shank suits operations where stability and tool life are priorities, such as finishing passes or light shoulder milling. The balanced three-flute geometry provides smooth chip evacuation while maintaining material removal rates, which helps to increase process reliability on CNC milling centres. Easy insert management and industry compatibility This indexable cutter accepts 4NKT06 inserts and is specified for use with Taegutec-style plates, enabling straightforward toolset standardisation in mixed fleets. Indexable inserts allow rapid edge changes and predictable tool costs: worn inserts are replaced rather than regrinding the tool body. The clamping system uses a Torx M3x6.5 screw secured with a T8 key, providing a reliable, repeatable insert seat that simplifies changeover procedures and reduces downtime. For buyers consolidating tooling platforms, the compatibility with widely used insert formats offers logistical advantages and faster maintenance routines. Application-focused benefits: predictable quality and operator convenience With three cutting edges and a compact geometry, the cutter delivers a compromise between high metal removal capability and smooth cutting behaviour. The design minimises vibration and supports controlled chip flow, which is particularly beneficial when machining steels and general-purpose alloys where tool stability affects dimensional accuracy. The tool’s modest weight of 0.306 kg and standard shank diameter facilitate secure clamping in conventional toolholders, enabling seamless integration into existing production setups without specialised arbors. For shops aiming to improve throughput without complex retooling, this cutter offers a pragmatic efficiency gain. Contact Metav Werkzeuge for tailored setup advice and secure the Teknik Makina shank milling cutter S473TM with Ø20 mm shank for immediate integration into production workflows Technical Data Article number: S473TM Manufacturer: Teknik Makina Product: Shank milling cutter for 4NKT 0603 indexable inserts Facts Shaft diameter: 20 mm Cutting length: 25 mm Overall length: 120 mm Diameter: 20 mm Number of cutting edges: 3 Weight: 0.306 kg Torx screw: M3x6.5 Torx key: T8 Special features Compatible inserts: 4NKT06 Compatible insert manufacturer: Taegutec Indexable, replaceable cutting edges Compact shank for reduced overhang FAQ What inserts fit this cutter? The cutter is designed for 4NKT06 indexable inserts; compatibility with Taegutec-format plates is specified for straightforward replacement. Can this tool be used for finishing passes? Yes. With a short cutting length of 25 mm and a rigid 20 mm shank, the cutter is suitable for finishing operations that require stability and good surface quality. What clamping hardware is supplied? The tool uses a Torx M3x6.5 screw secured with a T8 key, providing a repeatable insert seat and easy insert changes. Is the S473TM suitable for long overhangs? The S473TM’s compact overall length (120 mm) and Ø20 mm shank are optimised to reduce deflection; extended overhangs should be avoided to maintain dimensional accuracy. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm End Mill For ADKT 10T3 Indexable Inserts With Internal Coolant, 35mm Cutting Length - Teknik Makina
Take advantage of the combination of robust stability and efficient coolant supply for consistent milling performance; the 20 mm shank and compatibility with ADKT 10T3 indexable inserts ensure straightforward integration into existing setups. Order the cutter directly via Metav Werkzeuge or consult our specialists for selection support. Shaft milling cutter S078TM — 20 mm shank, internal coolant (Teknik Makina) Shaft milling cutter S078TM designed as an indexable insert milling body for ADKT 10T3 inserts, offering a 20 mm shank and integrated internal coolant for demanding industrial milling tasks. 20 mm shank diameter Internal coolant supply Compatible with ADKT 10T3 inserts 200 mm overall length Stable machining with a compact shank for repeatable results The milling body delivers a rigid 20 mm shank that reduces vibration and improves surface finish during interrupted and continuous cuts. As a precision toolholder for ADKT 10T3 indexable inserts, the design prioritises concentricity and run-out control, which translates to fewer rejects and more predictable process windows. The modest mass of the assembly supports fast spindle acceleration without compromising stability, contributing to efficient cycle times and consistent repeatability across batches. Coolant-fed insert seat extends tool life and process reliability Integrated internal coolant routes cutting fluid directly to the cutting zone, improving chip evacuation and cutting-edge cooling at higher metal-removal rates. Direct coolant flow lowers edge temperatures and helps prevent build-up, which preserves insert geometry and reduces flank wear. In practice, this means longer tool life for the inserts and fewer unscheduled changeovers—an economical advantage for production runs that require sustained throughput. Quick maintenance and secure clamping for minimal downtime The cutter uses standard fixings for simple service: Torx T8 key compatibility and M2.5x5.5 fastening screws allow rapid insert changes and reliable clamp force. With three indexed cutting edges per position, users benefit from quick rotations of inserts to fresh cutting corners; the modest cutting-head length supports efficient access for maintenance tasks. These features reduce tool change time and make the assembly practical for busy workshop routines. Broad applicability and integration into existing tool systems Engineered to accept inserts from Korloy and conform to ADKT geometry, the tool body is a practical choice for shops standardised on indexable tooling. The 200 mm overall length and 35 mm cutting head length provide reach for a range of milling operations while keeping the tool assembly compact enough for tight setups. Where stable, coolant-assisted milling is required, this cutter delivers a balance of accessibility, performance and adaptation to common industrial toolholders. Contact Metav Werkzeuge for tailored application advice and fast delivery from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: S078TM Manufacturer: Teknik Makina Product type: Shaft milling cutter Suitable for inserts: ADKT 10T3 Facts Shank diameter: 20 mm Overall length: 200 mm Cutting-head length: 35 mm Number of cutting edges: 3 Weight: 0.49 kg Special features Internal coolant Compatible insert supplier: Korloy Torx key: T8 Fastening screw: M2.5x5.5 FAQ What inserts fit this cutter? The shaft milling cutter accepts ADKT 10T3 indexable inserts and is specified for inserts from Korloy. Is the tool coolant-fed? Yes — the cutter features internal coolant to direct fluid to the cutting zone for improved chip control and longer insert life. How many cutting edges are available per position? The tool body accommodates positions with three cutting edges, allowing quick indexation for extended usage before replacement. Which shank diameter and overall length are specified? This cutter has a 20 mm shank and a 200 mm overall length, offering a compact yet capable configuration. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm End Mill For ADKT 1204 Indexable Inserts With Internal Coolant, 100mm - Teknik Makina
Take advantage of a compact, rigid milling solution that combines a 20 mm shank, internal coolant and compatibility with ADKT 1204 indexable inserts for reliable chip control and consistent surface finish; order through Metav Werkzeuge or consult our specialists for application-specific guidance. Shaft milling cutter S051TM – 20 mm shank, internal coolant, for ADKT 1204 inserts (Teknik Makina) Shaft milling cutter S051TM designed for indexable-insert milling with ADKT 1204 inserts; built to provide rigid clamping, efficient coolant delivery and straightforward insert changes in production environments. Internal coolant for improved chip evacuation 20 mm shank for high clamping rigidity Compatible with ADKT 1204 inserts by Korloy High rigidity for steady, productive machining The compact design with a 20 mm shank delivers elevated rigidity, reducing vibration and enabling stable cutting even in interrupted cuts. A rigid connection between spindle and tool decreases deflection, which in turn improves dimensional repeatability and surface quality; the result is fewer reworks and a smoother production flow. The tool's balanced geometry is optimised for predictable behaviour in light-to-medium machining tasks, supporting consistent cycle times. Coolant integration that enhances tool life and surface finish Integrated internal coolant directs lubricant and coolant to the cutting zone, promoting efficient heat dissipation and improved chip control. By keeping the cutting edge cooler and flushing chips away from the insert seat, the tool reduces the risk of built-up edge and scoring. For operations where thermal stability and surface integrity matter, the coolant feed helps maintain longer insert life and steadier tolerances, lowering effective tooling costs per component. Flexible indexable-insert concept for quick servicing Designed for ADKT 1204 indexable inserts and compatible with Korloy inserts, the cutter uses a simple screw retention system (M3x7 with a T8 Torx key) for fast, repeatable insert changes. The two cutting edges arrangement balances cutting forces while offering a compact cutting zone; this makes insert replacement and reconditioning straightforward, reducing machine downtime and simplifying spare-part logistics for production schedules. Practical dimensions and workshop ergonomics With an overall length of 100 mm and a 35 mm cutting length, the tool fits confined setups while still offering adequate engagement for a variety of slotting and face-milling tasks. The modest weight supports easy handling at the tool crib and during changeover. Clear specification of the fastening parts and access via the T8 Torx key ensures routine maintenance is quick and safe, supporting continuous workshop throughput without complex procedures. Contact Metav Werkzeuge for tailored application advice on the Teknik Cutting Tools S051TM and to discuss availability from Emmerich; technical consultants are ready to assist by phone or email. Technical data SKU: S051TM Product type: Shank milling cutter Compatible inserts: ADKT 1204 Suitable insert manufacturer: Korloy Facts Diameter: 20 mm Shank diameter: 20 mm Overall length: 100 mm Cutting length: 35 mm Number of cutting edges: 2 Weight: 0.192 kg Insert screw: M3x7 Torx key: T8 Special features Internal coolant Indexable-insert system Compact 100 mm length Compatible with Korloy ADKT 1204 inserts FAQ Which inserts fit this cutter? The S051TM accepts ADKT 1204 indexable inserts and is specified to work with Korloy-manufactured ADKT 1204 inserts for predictable fit and performance. How does the internal coolant affect performance? Internal coolant on the S051TM delivers fluid directly to the cutting edge, improving heat control and chip evacuation and thereby extending insert life and stabilising surface finish. What are the key dimensions to consider for fixturing? Important dimensions for setup are the 20 mm shank diameter and the 100 mm overall length; the 35 mm cutting length defines the maximum axial engagement. How are inserts secured and replaced? Inserts are secured with an M3x7 screw accessed by a T8 Torx key, allowing repeatable insert changes and straightforward maintenance. Is this cutter suitable for heavy roughing operations? The S051TM is optimised for rigid, stable machining with good chip control; for heavy roughing, assessment of cutting parameters and machine capability is advised to ensure optimal performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm End Mill for APKT 1003 Indexable Inserts Internal Coolant, 30mm Cutting Length - Teknik Makina
Benefit from a robust indexable-insert milling solution with internal coolant and a 20 mm shank for stable toolholding; the combination of coolant-fed performance and secure Torx fastening keeps cycle times low and tool life predictable. Order directly via Metav Werkzeuge or consult the specialists for application advice. Shank milling cutter S032-1TM – 20 mm shank with internal coolant (Teknik Makina) Shank milling cutter S032-1TM designed for slotting and face milling with APKT 1003 indexable inserts, suited to workshop and production environments 20 mm shank for stable toolholding Internal coolant for improved chip evacuation Compatible with APKT 1003 indexable inserts Secure Torx fastening M2.5x5.5, key T8 High-efficiency indexable-insert milling for consistent productivity The shank milling cutter delivers repeatable performance by combining a rigid 20 mm shank with a short, stiff overall design. Because the tool accepts APKT 1003 indexable inserts, toolchanging is swift and economical: worn edges are replaced instead of the entire cutter, reducing downtime. The three cutting edges support balanced cutting forces and uniform load distribution, which helps to reduce vibration and extend spindle life. For production runs where predictable cycle time and low per-part cost matter, this cutter is engineered to contribute directly to throughput improvements. Direct coolant feed and secure fastening for dependable machining Equipped with internal coolant, the tool channels cutting fluid to the cutting zone, improving chip evacuation and thermal control. This targeted coolant supply reduces built-up edge and helps maintain consistent surface finish on ferrous and non-ferrous materials. The insert is retained by a Torx screw M2.5x5.5 tightened with a T8 key, providing a repeatable and secure clamping interface that minimises the risk of chatter or insert movement under load. These features together support longer insert life and fewer unplanned stops, translating into measurable savings on consumables and machine hours. Seamless workshop integration and compatibility advantages Designed to accept inserts from established manufacturers, the cutter is compatible with YG-1-type APKT 1003 inserts, simplifying procurement and stockholding. The combination of a 100 mm overall length and a 30 mm cutting length makes the tool suitable for a range of common milling tasks where reach and rigidity must be balanced. Lightweight at 0.342 kg, the tool contributes minimal additional inertia while remaining robust in clamping. For engineering buyers and production planners, the cutter offers a pragmatic balance between flexibility, maintainability and operational reliability, supported by Metav’s distribution and technical advisory services. Contact Metav Werkzeuge for bespoke application advice on the Teknik Makina S032-1TM and to discuss compatible inserts or delivery options. Technical Data Article number: S032-1TM Manufacturer: Teknik Makina Product type: Shank milling cutter Compatible inserts: APKT 1003 Compatible insert manufacturer: YG-1 Internal coolant: yes Facts Shank diameter: 20 mm Overall length: 100 mm Cutting length: 30 mm Cutting edges: 3 Weight: 0.342 kg Torx screw: M2.5x5.5 Torx key: T8 ECLASS: 21180806 Special features Internal coolant feed Indexable-insert design Secure Torx fastening Suited for workshop and production use FAQ What types of inserts fit this cutter? The cutter accepts APKT 1003 indexable inserts and is compatible with inserts from YG-1, enabling straightforward sourcing and replacement. Is the tool suitable for heavy roughing operations? The tool’s rigid 20 mm shank and three cutting edges offer good stability for moderate roughing; for heavy stock removal, assess fixture rigidity and spindle power alongside the Teknik Makina cutter’s specifications. How does the internal coolant benefit machining results? Internal coolant directed to the cutting zone improves chip evacuation and temperature control, which helps maintain consistent surface finish and insert life when using the S032-1TM. Which key and screw are required for insert changes? Insert retention uses a Torx screw M2.5x5.5, tightened or loosened with a T8 Torx key for reliable clamping. Can the cutter help reduce tooling costs? By using indexable inserts such as APKT 1003, the cutter reduces the need to replace whole tools; replacing individual insert edges lowers per-part tooling cost and downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm End Mill for APKT 1003 Indexable Inserts L100mm With Internal Coolant - Teknik Makina
Take advantage of the combination of reliable internal coolant, 20 mm shank rigidity, and compatibility with APKT 1003 indexable inserts to streamline milling operations and reduce setup time; order directly through Metav Werkzeuge or ask the consultants for compatibility guidance. Teknik Makina 20 mm shank milling cutter for APKT 1003 indexable inserts with internal coolant The Teknik Makina milling cutter for APKT 1003 indexable inserts is a shank-mounted indexable milling solution intended for precision material removal in industrial and workshop environments. 20 mm shank diameter Internal coolant supply Compatible with APKT 1003 Korloy inserts Overall length 100 mm Improved machining stability and consistent surface quality The cutter is built around a 20 mm shank and an overall length of 100 mm, which together provide a favourable balance between accessibility and stability. The solid shank diameter reduces vibration and runout, resulting in more consistent surface finish and extended insert life. By combining geometric stiffness with a compact length, the tool is well suited to short-to-medium overhang milling tasks where repeatability and dimensional control are priorities. Controlled cooling for higher material removal rates Equipped with internal coolant, the tool directs cutting fluid close to the cutting zone, which supports thermal control and chip evacuation during heavy or interrupted cuts. For workpieces that demand increased material removal, internal coolant aids in maintaining insert edge integrity and reduces the risk of heat-related wear. This targeted cooling enables higher sustained cutting parameters while protecting both the insert geometry and the workpiece microstructure. Versatile insert system and straightforward maintenance Designed for use with APKT 1003 indexable inserts from Korloy, the cutter accommodates a widely used insert form that simplifies inventory and tooling strategies. The three cutting edges configuration provides a balance between cutting economy and surface refinement. Fast insert changes are achieved using the supplied Torx fastening (T8) and M2.5×5.5 screw, making maintenance efficient and predictable for production environments where minimising downtime matters. Clear technical fit and workshop integration The tool’s specification—20 mm shank, 30 mm cutting length, and three cutting edges—matches common milling set-ups and collet/chuck systems without excessive modification. Where process planners require a dependable indexable solution that integrates with existing Korloy APKT insert stocks, this cutter provides straightforward compatibility and repeatable clamping. The modest mass and compact design also facilitate handling during tool change cycles. Request expert advice from Metav Werkzeuge to confirm fitment and availability of the Teknik Makina indexable milling cutter; contact info@metav-werkzeuge.com or call +49 2822 7131930 to arrange technical clarification or procurement assistance. Technical Data SKU: S144-1TM Product type: Indexable milling cutter Label: 20mm shank cutter APKT 1003 L100mm with internal coolant Manufacturer: Teknik Makina Facts Shank diameter: 20 mm Overall length: 100 mm Cutting length (shank-mounted): 30 mm Number of cutting edges: 3 Weight: 0.231 kg Torx key: T8 Torx screw: M2.5×5.5 Special features Internal coolant supply Compatible with APKT 1003 indexable inserts Suitable for Korloy APKT 1003 inserts FAQ What insert type is required for this cutter? The cutter is designed for APKT 1003 indexable inserts, compatible with Korloy APKT 1003 specifications and seating. Is internal coolant available and how does it help? Yes, the tool features internal coolant, which delivers fluid to the cutting zone to improve chip evacuation, reduce thermal wear and extend insert life. What are the key dimensional features to check before ordering? Confirm the 20 mm shank diameter, 100 mm overall length and the 30 mm cutting length to ensure correct clamping and sufficient reach for the intended application. How many cutting edges does the tool have and what is the benefit? The cutter has three cutting edges, offering a compromise between cutting economy and surface finish while enabling steady chip loads during milling. Which screw and key are used for insert fixation? Insert retention uses an M2.5×5.5 Torx screw, tightened with a T8 Torx key, facilitating quick and secure insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm End Mill for APKT 1003 Indexable Inserts With Internal Coolant, 150mm - Teknik Makina
Achieve reliable material removal with the combination of a 20 mm shank for stable clamping and internal coolant for consistent chip evacuation; the three cutting edges enable efficient engagement and smooth surface results. Order the insert milling cutter directly via Metav Werkzeuge or ask our consultants if needed. 20 mm shank milling cutter for APKT 1003 indexable inserts — internal coolant, L150 mm A 20 mm shank milling cutter designed for APKT 1003 indexable inserts, offering internal coolant and a 150 mm overall length for robust production and workshop milling tasks. 20 mm shank diameter Internal coolant for improved chip control Compatible with APKT 1003 inserts (YG-1) 60 mm cutting length for deeper engagement Stable clamping and efficient cutting for production use The tool combines a 20 mm shank with a 150 mm overall length to deliver a stable connection to the machine spindle, reducing vibration and improving repeatability. Fitted for APKT 1003 indexable inserts and configured with three cutting edges, the cutter is suited to medium-duty milling operations where stability and predictable tool life matter. The use of indexable inserts keeps tooling costs lower over time, as worn edges can be indexed or replaced without discarding the complete tool body. Internal coolant and secure insert retention for longer life Integrated internal coolant channels direct cutting fluid to the insert pocket, supporting effective heat dissipation and chip flushing at the cutting zone. This targeted cooling reduces thermal load on the insert and workpiece, helping to maintain cutting geometry and extend insert life. Insert retention is achieved with a Torx-mounted clamping screw (M2.5x5.5) driven with a T8 key, providing secure seating and simple serviceability during changeover or maintenance. Broad compatibility and streamlined maintenance to reduce downtime Designed to accept APKT 1003 indexable inserts and compatible with the YG-1 insert family, the cutter offers flexible material coverage for general workshop and light industrial applications. The arrangement of three cutting edges balances material removal rate with surface finish, and the accessible mounting system shortens changeover times. With a compact mass of 0.368 kg, the tool is easy to handle during setup while still providing the rigidity required for repeatable milling cycles. Contact Metav Werkzeuge today for supply and technical guidance on the Teknik Makina shank milling cutter S036-1TM; our consultants can advise on insert selection and machining parameters and are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: S036-1TM eClass: 21180806 Product type: Shank milling cutter Label: 20mm shank cutter APKT 1003 L150mm with internal coolant Facts Diameter: 20 mm Overall length: 150 mm Shank diameter: 20 mm Cutting length: 60 mm Number of cutting edges: 3 Weight: 0.368 kg Torx screw: M2.5x5.5 Torx key: T8 Special features Internal coolant For APKT 1003 indexable inserts Compatible insert manufacturer: YG-1 Three cutting edges for balanced engagement FAQ Which insert type fits this cutter? The cutter is designed for APKT 1003 indexable inserts and is compatible with inserts from YG-1 as specified for this shank milling cutter (SKU S036-1TM). Is internal coolant available and how does it help? Yes, the built-in internal coolant supplies cutting fluid directly to the insert pocket to assist chip evacuation and thermal control, which can improve insert life and process consistency for this Teknik Makina cutter. What is the cutting length and how does it affect machining? The tool offers a 60 mm cutting length, enabling deeper engagement per pass where machine and setup rigidity permit, while the 20 mm shank helps maintain clamping stability. How are the inserts secured and serviced? Inserts are secured with a Torx-mounted clamping screw (M2.5x5.5) tightened using a T8 key; this provides straightforward changeover and reliable retention during milling. For which applications is this cutter intended? This shank milling cutter is intended for general workshop and light industrial milling tasks where indexable inserts and internal coolant are advantageous for efficient chip control and repeatable results. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm End Mill for APMT 0602 Indexable Inserts Internal Coolant, 5 Flutes, 120mm - Teknik Makina
Take advantage of the combination of precise insert compatibility, internal coolant, and compact 20 mm shank design to maintain stable chip evacuation and consistent cycle times. Order the milling cutter directly via Metav Werkzeuge or consult the technical team for application-specific advice. Shank milling cutter S030-1TM — 20 mm shank, internal coolant (Teknik Makina) S030-1TM is a shank milling cutter designed for indexable insert applications, optimised for compact-diameter milling with APMT 0602 inserts 20 mm shank diameter Internal coolant for improved chip control Designed for APMT 0602 indexable inserts 30 mm cutting length for deeper passes Five cutting edges for balanced cutting High-efficiency machining through insert compatibility and coolant The design of the S030-1TM targets productivity in small-diameter milling: compatibility with APMT 0602 indexable inserts enables rapid insert changes and consistent cutting geometry, while the internal coolant channel supplies coolant directly to the cutting zone to assist chip evacuation and edge cooling. These features reduce cycle interruptions and support stable cutting forces, which is particularly useful where machine uptime and repeatable results are critical. The compact 20 mm shank keeps the tool rigid in tight setups and helps preserve spindle life. Secure clamping and service-friendly assembly for reliable shifts Five precisely positioned insert pockets provide a balanced cutting pattern that reduces vibration and extends insert life. The clamping system uses a T6 Torx key with M1.8x4.1 screws for reproducible torque and safe seating of each insert; this standardised fastening ensures repeatable clamping and quick replacement during shift changes. The arrangement supports repeatability in production batches and simplifies maintenance procedures without specialist tooling. Cutting engagement and application flexibility in confined setups With a 30 mm cutting length and overall length of 120 mm, the tool body allows deeper axial engagement while maintaining a compact envelope. The combination of cutting length and shank diameter makes the cutter suitable for a range of milling tasks where tool access is limited but axial depth is required. The modest mass (approx. 0.263 kg) contributes to lower centrifugal loads at moderate speeds, aiding dynamic stability in small‑diameter operations. Simplified procurement and supply-chain advantages for workshops Compatibility with Korloy-manufactured APMT 0602 inserts reduces the need for bespoke insert sourcing and supports fast replenishment. The shank milling cutter’s standardised fastening parts and common insert form factor allow workshop planners to keep fewer SKUs in stock while covering multiple part families. For further technical clarifications or application matching, Metav Werkzeuge provides targeted advice to align the cutter selection with machining strategy and production constraints. Contact Metav Werkzeuge for tailored procurement and technical guidance on the Teknik Makina S030-1TM with internal coolant to ensure the optimum setup for small-diameter milling tasks Technical data Article number: S030-1TM ECLASS: 21180806 Manufacturer: Teknik Makina Core specifications Diameter: 20 mm Overall length: 120 mm Shank diameter: 20 mm Cutting length: 30 mm Weight: 0.263 kg Number of cutting edges: 5 Materials & features Internal coolant: yes Compatible inserts: APMT 0602 Compatible insert manufacturer: Korloy Torx key: T6 Torx screw: M1.8x4.1 Product type: Shank milling cutter FAQ Which insert type fits this milling cutter? The cutter accepts APMT 0602 indexable inserts; Korloy inserts in that form factor are compatible with the S030-1TM. How is coolant delivered to the cutting zone? Coolant is supplied via the integrated internal coolant channel to the cutting area to assist chip control and edge cooling. How many cutting edges or inserts are fitted to the cutter body? The tool body is configured with five cutting edges, providing a balanced cutting pattern for improved stability. What are the shank size and overall length of the cutter? Shank diameter is 20 mm and overall length is 120 mm, with a cutting length of 30 mm. Which torque key and screw type are required for insert clamping? Insert clamping uses a T6 Torx key and M1.8x4.1 screws for reproducible fastening. Is the S030-1TM suitable for tight-access machining tasks? Yes, the combination of a 20 mm shank and a 30 mm cutting length makes the cutter well suited to confined milling operations where rigidity and axial engagement are needed. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm End Mill for APMT 0602 Indexable Inserts With Internal Cooling, 30mm Cutting Length - Teknik Makina
Taking advantage of its combination of 20 mm shank, internal coolant and compatibility with APMT 0602 indexable inserts, this cutter promotes stable machining and efficient chip control; order the tool directly via Metav Werkzeuge or consult our advisors for application support. Shank milling cutter S006-1TM — 20 mm shank, internal coolant (Teknik Makina) A Shank milling cutter S006-1TM designed for versatile milling operations using APMT 0602 indexable inserts, suitable for medium-duty finish and semi-roughing tasks where coolant-fed chip control and secure clamping are required. 20 mm shank diameter for secure clamping Internal coolant for improved chip evacuation Compatible with APMT 0602 indexable inserts 110 mm overall length, 30 mm cutting length Stable machining and enhanced process reliability The S006-1TM is engineered as an indexable insert milling cutter with a 20 mm shank and internal coolant channels to maintain cutting temperatures and reduce built-up edge formation. Internal feed reduces thermal load at the cutting zone, which extends insert life and supports consistent surface finish. Combining coolant delivery with a compact overall length results in improved chip evacuation, fewer interruptions for rework and reduced cycle-time variation—advantages that translate directly into predictable, efficient production runs. Secure clamping, quick insert changes and predictable results With a 30 mm cutting length and five cutting edges, the tool balances productive material removal and stability. The insert pocket and fastening use a T6 torx key and a M1.8x4.1 torx screw, enabling swift, repeatable insert changes and a reliable seat for each index. This reduces tool change downtime and contributes to reproducible part quality. The cutter is compatible with inserts from Korloy and accepts standard APMT 0602 grades, simplifying inventory and allowing the selection of coatings or substrates optimised for the workpiece material. Practical versatility for workshop and production environments Designed for routine integration into established toolsets, the holder supports a range of common machining tasks where coolant supply is available. The relatively light mass and compact form factor aid concentricity and minimise vibration on smaller machines while still delivering the rigidity needed for general milling. Supplied as a finished tool with a clear specification of 110 mm overall length and a weight of 0.241 kg, it is straightforward to assess balance, clamping requirements and toolholder compatibility during process planning, helping to streamline tool management in mixed-production environments. Contact Metav Werkzeuge for availability and tailored advice on Teknik Makina tooling; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: S006-1TM Manufacturer: Teknik Makina Product type: Shank milling cutter Article description: for APMT 0602 indexable inserts Label: 20mm shank mill APMT 0602 L110mm with internal coolant Facts Diameter / shank: 20 mm Overall length: 110 mm Cutting length: 30 mm Number of cutting edges: 5 Weight: 0.241 kg Torx key: T6 Torx screw: M1,8x4,1 eClass: 21180806 Special features Internal coolant Compatible with APMT 0602 indexable inserts Suitable for Korloy inserts Indexable insert milling cutter design Compact form for improved concentricity FAQ What inserts fit this cutter? The shank milling cutter S006-1TM accepts APMT 0602 indexable inserts and is compatible with inserts from Korloy, allowing use of commonly available grades for finishing and semi-roughing. Is the tool suitable for through-coolant delivery? Yes, the tool features internal coolant channels to support through-coolant injection for improved chip control and extended insert life. How many cutting edges does the cutter have? The S006-1TM is configured with five cutting edges to balance material removal and stability during milling operations. Which fastening hardware is required for the inserts? Insert clamping uses a T6 torx key and M1.8x4.1 torx screw for secure and repeatable fastening of the APMT 0602 inserts. What are the critical dimensions to check for toolholder compatibility? Key dimensions are a 20 mm shank diameter, 110 mm overall length and 30 mm cutting length; verify toolholder clamping and projection against these values. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm End Mill for APMT 11T3 Indexable Inserts 30mm Cutting Length, 3 Flutes - Teknik Makina
Combining a 20 mm shank with compatibility for APMT 11T3 indexable inserts delivers a balance of rigidity and productivity for indexable milling operations; the 100 mm overall length and three cutting edges support efficient chip evacuation and consistent results. Order directly via Metav Werkzeuge or ask their specialists for tailored technical advice. 20 mm shank milling cutter S233TM – indexable insert milling cutter for APMT 11T3 (Teknik Makina) A 20 mm shank milling cutter S233TM designed for industrial indexable-insert milling, offering reliable fixing for APMT 11T3 inserts and a compact 100 mm overall length for extended reach in standard machining setups. 20 mm shank diameter for rigid clamping Compatible with APMT 11T3 indexable inserts 100 mm overall length for extended reach Three cutting edges for efficient material removal Greater stability for consistent finishes The combination of a 20 mm shank and a compact geometry reduces run-out and vibration, which improves surface quality and extends insert life. With a mass of 0.278 kg, the cutter provides a stable centre of gravity for routine machining operations. The result is predictable tool performance and fewer interruptions for rework — a rational advantage for production environments aiming to keep cycles consistent and downtimes low. Improved productivity through optimised cutting geometry Designed around the APMT 11T3 insert system, the tool uses three cutting edges and a 30 mm cutting length to balance feed rates and chip control. This configuration supports steady chip evacuation and lower cutting forces when paired with appropriate inserts, enabling higher material removal rates in indexable milling tasks. The 100 mm overall length provides reach without compromising stiffness, which is especially useful for stepped or recessed features where access and rigidity must be balanced. Fast insert changes and secure fixing Insert replacement is straightforward thanks to the dedicated fixing hardware: a Torx T8 key secures inserts with an M2.5x5.5 screw, ensuring quick, repeatable clamping with minimal adjustment time. The cutter is compatible with Korloy APMT 11T3 inserts, allowing flexibility in grade selection for a wide range of applications. Supplied dimensions and standardized fixing mean predictable set-up times and simplified tool inventory management on the shop floor. Contact Metav Werkzeuge today for precise ordering and technical consultation on integrating the Teknik Makina S233TM into production — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S233TM Product: Shank milling cutter Brand: Teknik Makina Compatible inserts: APMT 11T3 Compatible insert manufacturer: Korloy Label: 20mm Schaftfräser APMT 11T3 L100mm eClass: 21180806 Dimensions / Core data Diameter: 20 mm Overall length: 100 mm Shank diameter: 20 mm Cutting length: 30 mm Number of cutting edges: 3 Weight: 0.278 kg Torx key: T8 Fixing screw: M2.5x5.5 Special features For APMT 11T3 indexable inserts Compatible with Korloy inserts Indexable insert fixing via Torx screw SKU: S233TM FAQ How many cutting edges does the tool have? The S233TM shank milling cutter is supplied with three cutting edges, providing a balance between efficient material removal and smooth cutting forces. Which indexable inserts fit this cutter? This cutter accepts APMT 11T3 indexable inserts and is specified to work with Korloy grades, allowing selection of coatings and grades for different materials and cutting conditions. What are the key dimensions to note for setup? Key dimensions are: 20 mm diameter, 100 mm overall length and a 30 mm cutting length; the tool weight is 0.278 kg, which helps when checking toolholder balance and reach. How are the inserts secured? Inserts are fastened with a Torx T8 screw, using an M2.5x5.5 fixing screw, ensuring rapid, repeatable clamping and straightforward insert changes. Is this cutter suitable for extended reach applications? With a 100 mm overall length and a 20 mm shank, the design provides extra reach while maintaining sufficient rigidity for many standard indexable milling tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm End Mill for APMT 11T3 Indexable Inserts L100mm With Internal Coolant - Teknik Makina
Combine internal coolant, a 20 mm shank and compatibility with APMT 11T3 indexable inserts for dependable, repeatable machining in production environments. Robust Torx-clamped insert mounting and a 100 mm overall length make the tool well suited to compact setups; order the shank milling cutter directly via Metav Werkzeuge or consult our technical team if required. Shank milling cutter for APMT 11T3 indexable inserts — 20 mm shank, internal coolant (Teknik Makina) A shank milling cutter designed for coolant-fed milling and secure insert clamping in general cutting-tool applications. 20 mm shank diameter for solid mounting Internal coolant for improved chip removal Compatible with APMT 11T3 indexable inserts Torx T8 clamping screw M2.5x5.5 Enhanced coolant control for stable machining The integrated internal coolant channel delivers cutting fluid directly to the cutting zone, improving chip evacuation and reducing heat at the contact point. This leads to more consistent cutting conditions and helps to maintain tool geometry for longer intervals between indexings, translating into fewer interruptions on the shop floor and improved process reliability. The coolant feed complements the cutter’s compact design to support stable feeds and speeds in shorter overhang setups. Secure clamping and proven insert compatibility With a 20 mm shank and Torx-secured insert fastening, the design prioritises repeatable seating and mechanical stability. The cutter accepts APMT 11T3 indexable inserts and is matched to Korloy insert variants, enabling fast index changes and straightforward inventory management. The Torx T8 screw (M2.5x5.5) secures the insert with defined torque characteristics, reducing movement under load and improving surface finish consistency in production runs. Compact geometry for reliable tool engagement The combination of a 100 mm overall length and a 30 mm cutting length limits overhang while still providing useful reach for many milling tasks. Together with two cutting edges, the cutter offers a balance between chip load capacity and low radial forces, which helps to reduce vibration and improve finish quality on interrupted cuts. The moderate cutting length supports rigidity, making the tool a good choice for operations where stability and repeatability are priorities. Practical integration into workshop workflows The cutter’s straightforward interface with common insert sizes and a standard shank diameter simplifies toolholder selection and fixture planning. Replacement inserts are indexed quickly and the defined clamping method supports consistent set-up times across tool changes. For complex specifications or to confirm fitment with existing holders, Metav Werkzeuge’s technical advisors are available to provide data or recommend matching toolholders and inserts to streamline procurement and minimise downtime. For ordering, technical queries or assistance with application matching for the Teknik Makina shank milling cutter (SKU S232-1TM), contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss integration into the production process Technical data Article number: S232-1TM ECLASS: 21180806 Manufacturer: Teknik Makina Product type: Shank milling cutter Core dimensions Diameter: 20 mm Overall length: 100 mm Shank diameter: 20 mm Cutting length (shank): 30 mm Number of cutting edges: 2 Weight: 0.243 kg Special features Internal coolant channel Compatible with APMT 11T3 indexable inserts Compatible insert manufacturer: Korloy Torx key size: T8 Torx screw size: M2.5x5.5 FAQ Which inserts fit this cutter? The cutter accepts APMT 11T3 indexable inserts; Korloy inserts in this size are compatible with the clamping seat. Is the tool coolant-fed? Yes, the shank milling cutter features an internal coolant channel to supply cutting fluid directly to the cutting edge. What is the shank diameter and overall length? The tool has a 20 mm shank diameter and a 100 mm overall length (SKU S232-1TM). How many cutting edges does the cutter have? The cutter is supplied with two cutting edges, balancing chip evacuation and surface finish. Which Torx key and screw are required for insert clamping? Insert clamping uses a Torx T8 key and a M2.5x5.5 Torx screw for secure fastening. Is the cutter suitable for compact toolholders? The 20 mm shank and standard interface make it compatible with common toolholders designed for that shank size; consult Metav Werkzeuge for holder recommendations. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
High-performance shank cutters and ball nose cutters for efficient milling
Insert shank cutters and ball nose cutters combine flexibility and productivity for a wide range of milling tasks. The category covers steel-bodied shank cutters fitted with indexable inserts for economical roughing, face milling, cornering and slotting, as well as ball nose cutters for contouring and 3D finishing.
How these tools work and where they belong
Shank cutters with indexable inserts use a carrier body made from hardened steel; the cutting edges are provided by removable inserts rather than a solid tool blank. Where tools do not have internal coolant, process heat and chips are managed via external coolant nozzles or compressed air, which is sufficient for open, surface-level and easily accessible milling on standard materials. Shank cutters with internal coolant feature fine internal channels that deliver coolant or blasting air directly to each cutting edge under pressure. This targeted supply is essential for deep pockets, cavities, full slotting and machining of heat-resistant or difficult-to-machine materials, because it prevents chip re-cutting, protects cutting edges from thermal overload and enables higher feed rates and improved surface quality.
Cut cycle times and reduce tooling costs
- Replaceable indexable inserts reduce consumable costs and shorten tool change time.
- Targeted internal coolant improves chip evacuation and extends insert life.
- Robust steel carrier bodies enable heavy-duty roughing without frequent tool replacement.
- Suitable for roughing, planing, corner milling and slot milling as well as precision 3D profiling with ball nose cutters.
A practical choice for purchasing and stocking tools
Metav brings a pragmatic purchasing advantage: a broad range of milling solutions is available from a single European quality hub. Metav’s focus on democratising precision means workshops benefit from a wide assortment, consistent quality control from Emmerich and steady supply — supported by decades of expertise and over 48,000 satisfied customers. Choose Metav for a centralised sourcing strategy that reduces supplier complexity while keeping access to both insert milling cutters (also referred to as insert milling cutters or indexable end mills) and ball nose cutters (also known as ball nose end mills or radius cutters) straightforward.
Quick summary
Insert shank cutters and ball nose cutters deliver flexible, cost-effective milling: replaceable inserts lower running costs, and internal coolant options enable higher performance and longer tool life where chip control is critical.
FAQ
When should I choose a shank cutter with indexable inserts rather than a solid carbide end mill?
Choose shank cutters with indexable inserts for economical roughing and high-stock-removal tasks where replacing inserts is preferable to replacing an entire tool; they are especially effective for face milling, cornering and slotting operations.
Does internal coolant make a measurable difference for ball nose cutters?
Yes. Internal coolant directed to each cutting edge reduces chip re-cutting and thermal stress, which improves surface finish and increases insert life when machining deep pockets, cavities or heat-resistant materials.
Can shank cutters without internal coolant be used for general workshop milling?
Absolutely. Tools without internal coolant rely on external coolant nozzles or compressed air and are well suited to open, superficial and easily accessible milling on standard materials.
What milling operations are shank cutters for indexable inserts typically used for?
Shank cutters with indexable inserts excel at economical roughing, planfräsen (face milling), corner milling and slot milling; ball nose cutters are the preferred choice for 3D profiling and finishing operations.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com