Efficient shaft cutters and ball nose cutters for versatile milling
Shaft cutters and ball nose cutters serve as robust rotating tools for roughing, face milling, corner milling and slotting, offering economical replacement of indexable inserts rather than whole solid tools. Available in versions with internal coolant to feed lubricant directly to each cutting edge or without internal coolant relying on external nozzles, these cutters ensure effective chip evacuation and thermal control suited to standard materials or deep pocket and cavity work. By preventing chip re-cutting and protecting cutting edges, they deliver higher feed rates, improved surface finish and extended tool life in demanding metalworking applications.
16mm Solid End Mill For APMT 0602 Indexable Inserts With Internal Coolant, 120mm - Teknik Makina
Take advantage of a compact, service-friendly tool that combines internal coolant delivery, a 16 mm shank and compatibility with APMT 0602 indexable inserts for stable machining and reduced downtime; order directly via Metav Werkzeuge or consult our specialists for application advice. Insert milling cutter for APMT 0602 indexable inserts — 16 mm shank, internal coolant (Teknik Makina) Insert milling cutter for APMT 0602 indexable inserts designed for reliable medium-duty milling in production and workshop environments 16 mm shank diameter Internal coolant supply Designed for APMT 0602 indexable inserts 120 mm overall length Improved chip control and consistent tool life The tool is built around an internal coolant channel that directs cutting fluid straight to the cutting zone, reducing heat and improving chip evacuation; this results in longer insert life and more consistent surface quality. With a 16 mm shank and a compact 120 mm overall length, the cutter supports stable clamping in standard collets and holders, which helps to decrease vibration and enhances repeatability in serial production. The use of indexable inserts means maintenance is limited to periodic insert replacement rather than full-tool resharpening, improving uptime and lowering running costs. Fast insert changes and secure fixing for short set-up times The cutter accepts APMT 0602 indexable inserts, secured with a Torx T6 screw (M1.8x4.1), enabling quick, repeatable insert changes with common workshop tools. The configuration with 4 cutting edges provides balanced cutting action and smoother load distribution across the tool body, which supports higher feed rates under stable conditions. Clear, standardised fixing parts mean spares and replacement inserts from established suppliers such as Korloy can be fitted without modification, simplifying supply-chain management and reducing tool-change errors. Practical design for everyday production use A modest 25 mm cutting length offers a compromise between reach and rigidity, suitable for pocketing and shoulder milling where stiffness and accessibility are required. The tool’s design focuses on straightforward integration into existing toolsets: compact dimensions, standardised connection interfaces and a measurable weight that supports predictable toolholder dynamics. For machining operations where efficient cooling and straightforward maintenance are priorities, this indexable-insert cutter delivers a balance of performance and serviceability tailored to busy workshops and industrial settings. Speak with Metav Werkzeuge for tailored application support on Teknik Makina’s insert milling solutions and to confirm suitability for specific production tasks — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: S029-1TM Manufacturer: Teknik Makina Product type: Insert milling cutter Designation: Shaft milling cutter for APMT 0602 indexable inserts Facts Shank diameter: 16 mm Overall length: 120 mm Cutting length (shank length of cut): 25 mm Number of cutting edges: 4 Weight: 0.164 kg eClass: 21180806 Special features Internal coolant supply Compatible with APMT 0602 indexable inserts Compatible insert manufacturer: Korloy Torx key size: T6 Torx screw: M1.8x4.1 FAQ Which inserts fit this milling cutter? The cutter is designed for APMT 0602 indexable inserts; Korloy inserts in this designation are compatible with the clamping system of the S029-1TM. Does the tool offer coolant to the cutting zone? Yes, the S029-1TM features internal coolant delivery to support cooling and chip evacuation directly at the cutting edge. What are the main dimensions to consider when selecting a holder? Key dimensions are a 16 mm shank diameter, 120 mm overall length and 25 mm cutting length, which help determine suitable collets and toolholders. How are the inserts secured and what tools are needed? Inserts are fixed with a Torx screw (M1.8x4.1); a Torx T6 key is required to tighten and remove the screw. Is this cutter suitable for high-volume shop-floor use? The S029-1TM is designed with serviceability and repeatability in mind, offering quick insert changes and internal coolant for consistent performance in regular production environments. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Solid End Mill For APXT 1003 Indexable Inserts, 2 Flutes 70mm Cutting Length, 90° Cutting Angle - Teknik Makina
Benefit from a robust combination of precise toolholding and quick insert changes: the 16 mm shank and 70 mm cutting length ensure stable deep cuts, while compatibility with APXT 1003 indexable inserts reduces downtime and tooling costs. Order directly via Metav Werkzeuge or consult our specialists for application advice. Shank milling cutter S190TM – for APXT 1003 indexable inserts, Ø16 mm, 2 cutting edges (Teknik Makina) The Shank milling cutter S190TM is a shank-mounted milling body engineered for secure, repeatable milling with APXT 1003 indexable inserts, designed for workshop and light industrial milling tasks where fast insert changes and consistent results are required. Ø16 mm shank for stable toolholding 70 mm cutting length for deeper passes Compatible with APXT 1003 inserts (Korloy) Secured with M2.5x5.5 Torx screw, T8 key Stable geometry for predictable metal removal The central design focus is consistent, vibration‑resistant performance during milling operations. With a 16 mm shank and an overall length of 250 mm, the tool body provides solid clamping and run‑out control that supports repeatable machining. The 70 mm cutting length gives scope for deeper engagement while the two cutting edges balance material removal rate and surface finish. The specified 90° cutting angle suits face and peripheral milling tasks, offering a straightforward approach to slotting and shoulder work without complex setup changes. Quick insert handling and economical downtime reduction Tooling efficiency is achieved through the use of APXT 1003 indexable inserts, a standard size that simplifies inventory management. The cutting edge geometry on these inserts is easily indexed or replaced, which reduces tool change time and overall production downtime. The cutter is fastened with an M2.5x5.5 Torx screw operated with a T8 key, enabling secure clamp‑up and quick servicing at the machine. For operations that value throughput and predictable consumable costs, this arrangement delivers a clear cost‑benefit through lower per‑cut tooling expense and simplified reconditioning. Compatibility and workshop advantages Compatibility with Korloy manufactured inserts and the standard APXT 1003 system makes the cutter a flexible component for existing insert stocks and procurement workflows. The body’s nominal 16 mm diameter and balanced weight of 0.415 kg keep handling straightforward while supporting a steady centre of gravity in the spindle. For shops converting from solid tool solutions to insert systems, this shanked cutter offers a pragmatic route to faster changeovers and improved process control, without extensive retrofitting. Technical staff will appreciate the clear specification set for integration into existing tool lists and CAM setups. For tailored technical guidance or to source the S190TM directly from Metav Werkzeuge, contact our Emmerich‑based specialists by phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical Data Article number: S190TM Name: Shank milling cutter for APXT 1003 indexable inserts Manufacturer: Teknik Cutting Tools / Teknik Makina Facts Shank diameter: 16 mm Cutting length: 70 mm Diameter: 16 mm Overall length: 250 mm Cutting edges: 2 Weight: 0.415 kg Cutting angle: 90° Special features For APXT 1003 indexable inserts Compatible with Korloy inserts Torx screw: M2.5x5.5 Torx key: T8 FAQ Which insert type fits this milling cutter? The cutter accepts APXT 1003 indexable inserts; the specification on the S190TM is matched to that insert format for secure seating and correct cutting geometry. Is the S190TM compatible with Korloy inserts? Yes, the product is specified as compatible with Korloy APXT 1003 inserts, enabling use of widely available insert options. How is the insert secured in the cutter body? Inserts are clamped and secured with an M2.5x5.5 Torx screw, tightened using a T8 key, providing firm retention and straightforward replacement. What are the main dimensions to consider when setting up the tool? Key dimensions are a 16 mm shank diameter, 70 mm cutting length and an overall length of 250 mm, which should be considered for tool projection and machine spindle clearance. Can the cutter be used for both face and peripheral milling? Yes, the 90° cutting angle and the two cutting edges make the tool suitable for both face and peripheral milling tasks where indexable inserts are preferred. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Solid Shaft Cutter for LNMX 0603 Indexable Inserts With Through Coolant, 110mm Length - Teknik Makina
Take advantage of the combination of rigid 16 mm shank, integrated internal coolant and compatibility with LNMX 0603 indexable inserts for reliable chip control and consistent cycle times. Order the shank milling cutter directly via Metav Werkzeuge or request advice from our consultants for application-specific selection. Shank milling cutter S284-1TM — 16 mm shank, internal coolant (Teknik Makina) Shank milling cutter S284-1TM engineered for indexable milling with LNMX 0603 inserts, offering a compact tool body for stable, repeatable machining in small to medium cutters. 16 mm shank diameter for rigid clamping Integrated internal coolant for chip evacuation Compatible with LNMX 0603 inserts (Korloy) Torx T8 screw M3x7 for secure insert retention Higher throughput from a compact, rigid design The combination of a 16 mm shank and a hardened tool body delivers improved rigidity and vibration resistance, which translates directly into more reliable surface finish and longer insert life. For short to medium overhangs the compact geometry reduces bending moments and enables higher metal removal rates compared with non-shank tooling of the same diameter. Built for indexable milling, the tool accepts LNMX 0603 inserts, allowing rapid insert changes and minimal downtime while maintaining consistent cutting performance. Improved process stability with internal coolant and positive clamping Integrated internal coolant directs cutting fluid close to the cutting edge, supporting efficient coolant delivery, reduced built-up edge and improved chip breaking. The design includes a Torx T8 drive and M3x7 screw for secure clamping of the insert, ensuring repeatable seating and safe operation under higher cutting pressures. These features together reduce thermal stress on the insert and help maintain cutting geometry, so the machining process remains stable across batch runs. Flexible workshop integration and straightforward replacement strategy Compatibility with Korloy LNMX 0603 indexable inserts simplifies procurement and stocking: the same insert family can be used across comparable cutters, lowering inventory complexity. The shank cutter’s modest overall length and a 30 mm cutting length enable integration in confined tool changers and versatile setups. For workshops seeking predictable tool changes, the indexable system reduces regrinding effort and supports quick replacement procedures, contributing to measurable uptime improvements on the shopfloor. For procurement or technical advice on Teknik Makina tools such as the S284-1TM, contact Metav Werkzeuge for personalised consultation and reliable delivery from our Emmerich hub. Technical data SKU: S284-1TM Brand: Teknik Makina Product type: Shank milling cutter Compatible inserts: LNMX 0603 (Korloy) Label: 16mm Schaftfräser LNMX 0603 L110mm mit Innenkühlung Core specifications Diameter: 16 mm Overall length: 110 mm Shank diameter: 16 mm Cutting length (shaft): 30 mm Number of cutting edges: 2 Weight: 0.172 kg Article class: 21180806 Design & special features Internal coolant supply Torx T8 drive, screw M3x7 Indexable system for LNMX 0603 inserts Compact shank geometry for rigid clamping Compatible insert manufacturer: Korloy FAQ What materials can be machined with this shank milling cutter? The shank milling cutter S284-1TM by Teknik Makina is designed for general indexable milling and accepts LNMX 0603 inserts; material suitability depends on the chosen Korloy insert grade and cutting data. How is coolant supplied to the cutting edge? Coolant is supplied via internal channels; the S284-1TM’s internal coolant directs fluid to the insert seat to aid chip evacuation and temperature control. Which insert and screw are required for this cutter? This tool uses LNMX 0603 indexable inserts and secures them with a Torx T8 screw (M3x7); the SKU is S284-1TM for reference when ordering spare parts. Is this cutter suitable for high-speed machining? Process suitability for high-speed milling depends on the insert grade and machine capability; the S284-1TM provides a rigid platform and internal coolant that support higher cutting parameters when paired with appropriate Korloy inserts. What advantages does the 16 mm shank offer in production? A 16 mm shank improves clamping rigidity and reduces deflection compared with smaller shanks, helping to maintain surface finish and extend insert life during repeated operations. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Solid Shank Cutter For RPMT 0803 Indexable Inserts With Internal Coolant, 200mm L - Teknik Makina
Take advantage of the combination of internal coolant, a 16 mm shank and compatibility with RPMT 0803 inserts to maintain stable cutting conditions and predictable tool life; order this tool directly via Metav Werkzeuge or consult our specialists for application advice. Shank milling cutter for RPMT 0803 indexable inserts — 16 mm shank, through‑coolant A shank milling cutter for RPMT 0803 indexable inserts designed for secure clamping and controlled chip evacuation in general milling operations where insert changeover and coolant delivery are essential Internal through‑coolant for improved chip evacuation 16 mm shank diameter for rigid clamping Compatible with RPMT 0803 Korloy indexable inserts 200 mm overall length with 40 mm cutting length Stability and rigidity for consistent machining results The solid 16 mm shank and compact geometry provide a stiff tool connection that reduces vibration and run‑out, improving surface finish and tool life under moderate to heavy machining. With two cutting edges and a 40 mm cutting length, this milling tool offers a balance between engagement area and stability, suitable for slotting and shoulder milling where consistent cutting conditions matter. The tool body is optimised for secure clamping in standard collets and holders, delivering repeatable results across batch production. Controlled cooling and chip evacuation to protect inserts Equipped with internal coolant, the cutter supplies fluid directly to the cutting zone, which lowers tool temperature and assists chip removal from the insert pocket. This targeted coolant feed reduces thermal stress on the insert seating and can extend the life of RPMT 0803 indexable inserts while maintaining a more consistent cutting force. For operations using Korloy inserts, the through‑coolant arrangement helps to reduce built‑up edge and improves surface integrity on the workpiece, translating into fewer stoppages for manual cleaning or premature insert changes. Practical interface and simple serviceability for reduced downtime Fast insert changes are supported by standard fixing hardware: the tool uses a T8 Torx key and M3x7 screws for secure insert clamping, allowing quick replacement on the shop floor. The cutter, produced by Teknik Makina, is supplied as SKU R310-2TM, which simplifies reordering and inventory management. The compact overall length of 200 mm keeps the tool overhang conservative while the design allows straightforward access to the insert pocket for maintenance tasks, reducing non‑productive time between operations. Contact Metav Werkzeuge today to discuss application suitability for the Teknik Makina shank milling cutter with internal coolant and to arrange a specification check tailored to the production task Technical data Article number: R310-2TM Manufacturer: Teknik Makina Compatible insert: RPMT 0803 (Korloy) Dimensions & performance Diameter: 16 mm Overall length: 200 mm Cutting length: 40 mm Shank diameter: 16 mm Number of cutting edges: 2 Features & compatibility Internal through‑coolant Torx screw: M3x7 Torx key: T8 Product type: shank milling cutter Suitable for RPMT 0803 indexable inserts FAQ What applications is this cutter best suited for? This shank milling cutter is intended for general slotting and shoulder milling where a compact tool with internal coolant and compatibility with RPMT 0803 indexable inserts is required. Which inserts fit this cutter? The cutter accepts RPMT 0803 indexable inserts; use Korloy‑specified RPMT 0803 grades for best seat fit and performance with this tool. How is coolant supplied to the cutting zone? Coolant is delivered through the tool body via the internal coolant channel, directly reaching the insert interface to improve chip evacuation and thermal control. What hardware is required to replace an insert? Insert retention uses an M3x7 Torx screw tightened with a T8 Torx key, enabling quick and standardised insert changes on the shop floor. Can this cutter be identified for reordering? Yes — the tool is listed as SKU R310-2TM, which should be used when reordering or requesting technical data. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Solid Shank Cutter For VDKT 11T2 Indexable Inserts With Internal Coolant, 90mm Length - Teknik Makina
Benefit from precise chip control, fast insert changes and secure clamping thanks to the compact 16 mm shank and internal coolant; these features combine to improve cycle stability and reduce downtime. Order the shank milling cutter directly via Metav Werkzeuge or consult our specialists for application-specific advice. Shank milling cutter S398TM — 16 mm shank, internal coolant (Teknik Makina) The shank milling cutter S398TM is a compact milling-body designed for indexable milling with VDKT 11T2 inserts, ideal for CNC side and face milling where quick insert changes and reliable coolant supply are required 16 mm shank diameter for secure clamping Internal coolant for improved chip evacuation Compatible with Korloy VDKT 11T2 inserts 90 mm overall length with 25 mm cutting length Precision and tool-life through internal coolant and compact design The S398TM body pairs a 16 mm shank with a focused internal coolant channel to keep the cutting zone clear and the insert edge cooler under load. This controlled coolant delivery reduces built-up edge and supports consistent cutting conditions, which in turn extends insert life and minimises rejects. The compact 90 mm overall length and 25 mm effective cutting length deliver rigidity at the toolholder, improving dimensional stability in interrupted and continuous milling operations. Fast serviceability and standardised fixing for minimal downtime Changeovers are straightforward: the cutter accepts VDKT 11T2 indexable inserts from Korloy and secures them with the supplied M2.5x5.5 Torx screws tightened using a T8 key. The two cutting edges are indexed quickly, allowing rapid restoration of cutting performance without complex calibration. Standardised fixing hardware and the short cutting length make the tool well suited for production environments where repeatability and fast intervention are priorities. Practical application and economical operation in the workshop Designed as a versatile milling body, the tool is suitable for general-purpose milling tasks on modern CNC equipment where indexable insert systems are preferred for cost efficiency. The combination of reliable clamping from the 16 mm shank, the internal coolant advantage and the lightweight body (approx. 0.135 kg) supports higher machine throughput with lower per-cutting-hour costs. For application queries or specification matches, Metav Werkzeuge provides technical guidance and can advise on optimal insert grades and cutting parameters by phone or e‑mail. Contact Metav Werkzeuge for tailored application advice and to secure the S398TM shank milling cutter with internal coolant from our Emmerich stock Technical Data SKU: S398TM Product type: Shank milling cutter for VDKT 11T2 Manufacturer: Teknik Makina Weight: 0.135 kg Core data Shank diameter: 16 mm Overall length: 90 mm Cutting length (shank): 25 mm Number of cutting edges: 2 Special features Internal coolant Compatible with Korloy VDKT 11T2 indexable inserts Torx key: T8 Torx screw: M2.5x5.5 FAQ Are Korloy VDKT 11T2 inserts compatible with this cutter? Yes. The S398TM is designed specifically to accept VDKT 11T2 indexable inserts and is compatible with Korloy insert variants. Does the cutter provide internal coolant to the insert seat? Yes. The internal coolant channel delivers coolant directly to the cutting zone to aid chip evacuation and reduce thermal wear on the insert. What shank size is required for mounting? The tool has a 16 mm shank, suitable for holders and collets rated for a 16 mm diameter. How are the inserts fixed and which tools are required? Inserts are secured using M2.5x5.5 Torx screws and a T8 key for tightening, enabling quick and standardised insert changes. Which applications suit this milling body best? This milling body is suited to indexable milling operations on CNC machines where short overhang and reliable coolant supply are required; the two cutting edges and 25 mm cutting length help maintain rigidity and repeatable performance. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
17mm Back Counterbore For CCMT 060204 Inserts, 20mm Shank 132mm Overall - Teknik Makina
Take advantage of stable mounting, straightforward indexable insert replacement and a compact overall length for reliable rear-facing countersinking — order directly via Metav Werkzeuge or consult our technical advisors for application guidance. Back countersink C104TM by Teknik Makina — 20 mm shank, compatible with CCMT 060204 inserts The Back countersink C104TM is an indexable tool designed for rear-facing countersinking and light back-boring tasks on turning centres and lathes Compatible with CCMT 060204 inserts 20 mm shank diameter 26 mm max cutting diameter Torx M2,5x5,5 clamping screw Secure mounting for repeatable rear countersinking The body is engineered to provide a stable tool position during back-facing operations, with a 20 mm shank and a 132 mm overall length that balance reach and stiffness. The single cutting edge construction with 1 cutting edge promotes predictable chip evacuation and a controlled surface finish, which is particularly useful when reversing onto a workpiece shoulder. The modest mass of the tool contributes to less vibration during machining, resulting in improved concentricity and consistent process control. Fast insert changes and reliable clamping The tool accepts indexable inserts CCMT 060204, allowing quick replacement without complex regrinding. The insert is secured with a Torx M2,5x5,5 clamping screw and requires a T8 key for tightening, simplifying maintenance routines and reducing downtime. Indexable systems like this separate the cutting geometry from the body, which lowers per-cutting-edge cost and speeds up setup when different edge geometries are needed for varying materials. Precise cutting range for typical turning tasks With a 26 mm cutting diameter as the specified maximum and a nominal 17 mm diameter body dimension, the tool covers a practical range for rear countersinks and small back-boring operations. The defined cutting diameter helps in process planning and toolpath programming, enabling efficient cycle-time estimates and predictable material removal. The straightforward geometry reduces the need for complex coolant strategies while maintaining a reliable surface quality. Predictable performance and workshop benefits Weighing 0.261 kg, the tool offers an easy balance between rigidity and manoeuvrability, which is advantageous for shops seeking repeatable results without excessive tool mass. The indexable system minimises inventory complexity by allowing a single holder to serve multiple insert types for varied operations. Supplied as a compact tool body, it supports a streamlined tooling setup and contributes to consistent part tolerances across production runs. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Cutting Tools Back countersink C104TM into existing workflows or to arrange a supply from our Emmerich warehouse — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: C104TM Manufacturer: Teknik Makina ECLASS: 21180208 Core measurements Shank diameter: 20 mm Overall length: 132 mm Max cutting diameter: 26 mm Nominal diameter: 17 mm Cutting edges: 1 Weight: 0.261 kg Design & compatibility Indexable inserts: CCMT 060204 Clamping screw: Torx M2,5x5,5 Torx key size: T8 Application: back countersinking / rear-facing operations FAQ Which inserts fit the tool? The tool accepts CCMT 060204 indexable inserts; this insert type is specified for the Back countersink C104TM and allows rapid replacement. What size shank does the body have? The holder is supplied with a 20 mm shank, suitable for toolposts and adaptors that accept 20 mm tool shanks. What is the maximum cutting diameter? The maximum cutting diameter is 26 mm, which defines the upper limit for countersinking and small back-boring tasks with this holder. Which screw and key are used for clamping the insert? Insert clamping is performed with a Torx M2,5x5,5 screw and requires a T8 key for tightening and removal. Is the tool suitable for CNC turning centres? Yes, the design of the holder and its indexable insert system make it appropriate for use on lathes and CNC turning centres in rear-facing countersinking applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
17mm End Mill for LOGU 0303 Indexable Inserts Internal Coolant, 150mm Length - Teknik Makina
Combining LOGU 0303 indexable insert compatibility with built-in internal coolant, this shank milling cutter provides improved chip evacuation and consistent surface finish for compact machining setups; its 16 mm shank and 150 mm overall length ensure stable clamping and reliable runout. Order the cutter directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. Shank milling cutter S676-1TM – 17 mm diameter, internal coolant (Teknik Makina) A robust shank milling cutter S676-1TM designed for LOGU 0303 indexable inserts, ideal for compact milling and precise slotting in production and workshop environments 17 mm diameter for compact setups Internal coolant for effective chip evacuation Compatible with LOGU 0303 inserts (Kyocera) 16 mm shank, 150 mm overall length Consistent metal removal with optimised coolant flow Designed for reliable material removal, this shank cutter combines a 17 mm diameter with a 50 mm cutting length to balance accessibility and cutting stability. The integrated internal coolant channel directs coolant precisely to the cutting zone, which reduces built-up edge and promotes uniform surface quality. With 2 cutting edges, the tool offers predictable engagement and simplified feed strategies, making it suitable for repetitive milling operations where consistent part finish and predictable tool life are priorities. Fast insert changes and secure fastening for high uptime Compatibility with LOGU 0303 indexable inserts and standard fastenings reduces downtime. The insert seat accepts Kyocera-format inserts and is secured by an M3x7 Torx screw tightened with a T8 key, enabling quick, repeatable insert replacement. This design minimises setup time and simplifies maintenance, translating to measurable productivity gains on jobs requiring frequent index changes or batch processing of similar components. Compact design that supports stable clamping in CNC setups A modest 150 mm overall length combined with a 16 mm shank delivers a compact tool geometry that reduces overhang and improves axial stiffness. The low mass and balanced geometry, together with precise seating for inserts, contribute to reduced vibration and improved concentricity in milling spindles. Supplied by Teknik Makina, the cutter is intended for workshop and industrial contexts where space-efficient tooling must still deliver repeatable results and straightforward handling. For procurement and technical advice on the Teknik Makina S676-1TM with internal coolant and LOGU 0303 compatibility, contact Metav Werkzeuge in Emmerich for fast, expert guidance Technical data SKU: S676-1TM Product type: Shank milling cutter Manufacturer: Teknik Makina Label: 17mm shank milling cutter LOGU 0303 L150mm with internal coolant Weight: 0.219 kg Dimensions & core specifications Diameter: 17 mm Shank diameter: 16 mm Overall length: 150 mm Cutting length (shank of cutting): 50 mm Number of cutting edges: 2 Torx key: T8 Torx screw: M3x7 Designs & special features Internal coolant: Yes Compatible inserts: LOGU 0303 Compatible insert manufacturer: Kyocera Product designation: Shank milling cutter for indexable inserts FAQ What inserts fit this cutter? The cutter accepts LOGU 0303 indexable inserts; it is compatible with Kyocera-format inserts for straightforward integration with existing tooling systems. Does the tool supply coolant to the cutting edge? Yes, the S676-1TM features internal coolant that channels fluid directly to the insert seat for improved chip control and cooling. What are the shank and overall lengths? The tool has a 16 mm shank and a 150 mm overall length, offering a compact geometry for reduced overhang. How many cutting edges does the tool use? This cutter uses 2 cutting edges, providing a balance between cutting stability and efficient material removal. Which torque tool is required to change inserts? Insert clamping uses an M3x7 Torx screw which is tightened with a T8 Torx key for secure and repeatable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17mm End Mill for Taegutec BLMP 0603 inserts - Teknik Makina
Available Technical Details: Item: End Mill Brand: Teknik Makina Order Number: S478TM usable with BLMP 0603 Indexable Inserts of Taegutec Diameter: 17mm Total length: 150mm Cutting Edges: 2 Weight: 0.244kg Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
17mm End Mill for XNEX 0403 Indexable Inserts With Internal Coolant, 30mm Cutting Length - Teknik Makina
Take advantage of reliable indexable milling performance with internal coolant and a compact 17 mm diameter for consistent chip control and reduced tool change frequency; order or request technical advice directly via Metav Werkzeuge for tailored support. Shank Milling Cutter S194-1TM — 17 mm diameter with internal coolant, for XNEX 0403 indexable inserts by Teknik Makina The Shank Milling Cutter S194-1TM is an indexable insert holder designed for precision milling tasks in production environments, combining compact geometry with coolant-fed insert seating for stable cutting and straightforward insert changes 17 mm diameter with 16 mm shank Internal coolant for stable chip evacuation Compatible with XNEX 0403 inserts (SECO) Two cutting edges for efficient removal Stable cutting performance through coolant-fed insert design The cutter's defining advantage is the internal coolant feed directly to the insert seat, which improves lubrication at the cutting zone and supports controlled chip formation. With a 17 mm diameter and a 16 mm shank, the tool offers a compact footprint while maintaining rigidity; this is particularly useful in confined tool setups or where minimal overhang is required. Internal coolant reduces heat build-up and can contribute to more consistent surface finish and longer insert life, thereby lowering tooling costs over multiple production cycles. Designed to increase productivity and reduce downtime Carrying two cutting edges and a 30 mm cutting length, the holder allows efficient material removal while keeping insert changes fast and predictable. The use of XNEX 0403 indexable inserts means worn cutting edges are replaced rather than the entire tool, which shortens maintenance intervals and keeps machines running. The secure fixing via a Torx T8 key and M2.5x6.5 Torx screw ensures repeatable seating torque and reliable clamping force, limiting the risk of insert movement under load and supporting consistent cycle times. Compatibility, handling and workshop integration The shank profile with a 16 mm shank diameter fits standard holders and collet systems, simplifying integration into existing tool magazines and reducing adapter complexity. The tool's overall length of 150 mm and modest weight of 0.225 kg make it suitable for automated tool changers and multi-op setups where balance and repeatability matter. Compatibility with inserts from the SECO family expands the available geometries and grades for different workpiece materials and machining strategies, enabling tailored cutting solutions for a range of applications. For machining reliability backed by expert advice and European logistics, contact Metav Werkzeuge to discuss the Teknik Makina S194-1TM shank milling cutter and arrange purchase or technical consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: S194-1TM Product type: Shank milling cutter For inserts: XNEX 0403 indexable inserts Compatible insert manufacturer: SECO Core specifications Diameter: 17 mm Shank diameter: 16 mm Overall length: 150 mm Cutting length: 30 mm Number of cutting edges: 2 Weight: 0.225 kg Features & compatibility Internal coolant Torx key: T8 Torx screw: M2.5x6.5 Label: 17mm shank cutter XNEX 0403 L150mm with internal cooling SKU: S194-1TM Manufacturer: Teknik Makina FAQ What inserts are compatible with this shank milling cutter? The shank milling cutter accepts XNEX 0403 indexable inserts; the tool is specified to be compatible with inserts from SECO for a wide choice of grades and geometries. How is coolant supplied to the cutting edge? Coolant is fed internally to the insert seat on the S194-1TM, providing targeted lubrication and improved chip evacuation at the cutting zone. Which toolholders are suitable for this cutter? Holders or collets that accept a 16 mm shank diameter are suitable; the design supports common chucking systems used in milling spindles and toolholders. What fastener is used to secure the inserts? Inserts are clamped with a Torx screw specified as M2.5x6.5, tightened using a T8 Torx key to ensure repeatable clamping and seating. Can this cutter be used in automated tool changers? Yes. With an overall length of 150 mm and a weight of 0.225 kg, the cutter is compatible with automated tool-change systems where compact, balanced tools are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
17mm Shank Cutter For 4NKT 0603 Indexable Inserts 2 Flutes 22mm Cutting Length 150mm Overall - Teknik Makina
Take advantage of a compact, rigid shank design combined with secure Torx clamping and proven compatibility with 4NKT 0603 indexable inserts for consistent productivity on CNC machines. Order through Metav Werkzeuge for reliable European supply and expert advice. Teknik Makina Shank milling cutter S472TM — 17 mm diameter, 2 flutes, for 4NKT 0603 indexable inserts The Shank milling cutter S472TM is a solid shank cutter designed for use with 4NKT 0603 indexable inserts, optimised for stable slotting and profile milling in CNC and machining-centre applications. Compatible with Taegutec 4NKT06 inserts 17 mm cutting diameter for mid-range routing 16 mm shank for high rigidity Secure Torx M3x6,5 clamping with T8 key Reliable clamping and insert compatibility for fast changeovers The Teknik Makina tool is engineered around fast, reproducible insert clamping. The combination of a Torx M3x6,5 clamping screw and a T8 key ensures secure seat retention and simple replacement of the indexable inserts. As the cutter accepts Taegutec type 4NKT06 inserts, shops benefit from broad insert availability and flexible grade choice, reducing downtime and simplifying inventory management for repetitive series production. Precision geometry that improves chip control and surface finish With a 17 mm cutting diameter and 2 flutes, this milling tool delivers a balance between material removal rate and surface quality. The geometry is optimised to promote consistent chip evacuation and reduced cutting forces, which helps to maintain cycle-time stability. A 22 mm cutting length provides sufficient engagement for common slotting and shoulder operations while avoiding excessive overhang that would compromise accuracy. Built for rigidity and repeatable accuracy in CNC set-ups A 16 mm shank diameter and a total length of 150 mm overall length provide a compact, stiff toolholder interface that reduces runout and deflection during heavier passes. The assembly’s modest mass — approximately 0.241 kg — makes it easier to handle during tool changes and minimises inertial loading on high-speed spindles. This mechanical stability translates into predictable tool life and repeatable dimensional results across batches. Supply reliability and expert backing from Metav Delivered via Metav’s European distribution network, the cutter benefits from a stocked and quality-filtered supply chain centred in Emmerich. Metav’s long-standing presence and broad product range support workshop consolidation and make it straightforward to source matching inserts, spares and complementary tooling. Confidence in supply helps maintain planned production schedules and reduces the risk of unplanned machine downtime. Contact Metav Werkzeuge to discuss suitability for specific materials and machining strategies, or to arrange supply of Teknik Makina cutting tools — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: S472TM Manufacturer: Teknik Makina Product: Shank milling cutter for 4NKT 0603 indexable inserts ECLASS: 21180806 ETIM: EC011860 Facts Cutting diameter: 17 mm Shank diameter: 16 mm Cutting length: 22 mm Overall length: 150 mm Number of flutes: 2 Weight: 0.241 kg Torx screw: M3x6,5 Torx key: T8 Special features Compatible with Taegutec 4NKT06 inserts Suitable for indexable insert machining Files available: 62de7e510f56dbb4de4dbf07, 62de7ee6bd24461b3d5f7a72 SKU: S472TM FAQ What inserts fit this shank milling cutter? The cutter accepts 4NKT06 indexable inserts and is listed as compatible with Taegutec inserts for that size. Is the clamping screw type industry standard? Yes, the tool uses a Torx M3x6,5 clamping screw operated with a T8 key for standardised, secure insert retention. What are the key dimensions to check for holder compatibility? Confirm a 16 mm shank holder and a toolholder able to accommodate a 150 mm overall length; these dimensions match the cutter’s design. Can this tool be used for slotting and profile milling? The 17 mm diameter and 22 mm cutting length make the cutter suitable for typical slotting and shoulder milling operations in CNC environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
17mm Shank Milling Cutter for LNMU 0303 Indexable Inserts, 150mm Overall Length, 2 Cutting Edges - Teknik Makina
Take advantage of a compact, indexable milling solution that combines secure insert clamping, straightforward integration into existing toolholders and dependable repeatability for batch work. Benefit from the combination of precise compatibility with LNMU 0303 inserts and robust shank dimensions for stable machining — order directly via Metav Werkzeuge or consult our specialists for tailored advice. Shank cutter S672TM – indexable insert milling cutter, Ø17 mm, shank Ø16 mm (Teknik Makina) The Shank cutter S672TM is a purpose-built indexable milling head for machining tasks that require rapid insert changes and consistent cutting performance across production runs Compact Ø17 mm cutter diameter Shank Ø16 mm for secure toolholder fit Compatible with LNMU 0303 indexable inserts Torx screw M2.5x7 with T8 key for reliable clamping Engineered for consistent, repeatable cutting performance This indexable milling head is designed around the proven LNMU 0303 insert system, delivering controlled chip formation and predictable cutting forces through its 2 cutting edges. The replaceable-insert concept reduces downtime because only the insert needs replacing once worn, rather than the entire cutter, which improves overall tool economy. A secure clamping arrangement using a Torx screw M2.5x7 tightened with a T8 key gives a repeatable seat and minimises insert movement under load, supporting stable cutting results and consistent surface finish in serial production. Built to integrate quickly into existing setups With a cutter diameter of Ø17 mm, a shank Ø16 mm and an overall length of 150 mm, this tool fits common toolholders and offers the rigidity required for precision milling tasks. The close fit between shank and holder reduces runout and vibration, translating into improved concentricity and longer insert life. Compatibility with the TNGLY-OKE insert family ensures straightforward procurement of replacement inserts and predictable tool change procedures, making the unit a practical choice for workshop and light industrial CNC applications where quick set-up and repeatability matter. Supply reliability and technical support from Metav Distributed by Metav Werkzeuge, this indexable cutter benefits from a supply chain grounded in the company’s commitment to democratise precision. Metav’s experience across more than 48,000 customers and an extensive range of over 250,000 products means streamlined procurement and dependable stock handling from Emmerich. For buyers seeking predictable delivery and factual product information, Metav acts as a practical partner for integration, offering technical clarification and parts sourcing to keep production moving without unnecessary complexity. For secure, compatible milling with LNMU 0303 inserts, request the Teknik Makina S672TM via Metav Werkzeuge or contact our specialists at Metav Werkzeuge for precise application advice — Metav Werkzeuge, Emmerich Technical data Article number: S672TM Manufacturer: Teknik Makina Type: Shank cutter for LNMU 0303 indexable inserts eClass: 21180806 ETIM: EC011860 Facts Cutter diameter: 17 mm Shank diameter (Ø): 16 mm Overall length: 150 mm Cutting edges: 2 Special features Compatible inserts: LNMU 0303 Compatible insert manufacturers: TNGLY-OKE Clamp screw: M2.5x7 Torx key size: T8 FAQ What inserts does this milling head accept? The shank cutter S672TM accepts LNMU 0303 indexable inserts; it is also listed as compatible with inserts from the TNGLY-OKE family. Which toolholder size is required for installation? This cutter has a shank Ø16 mm, so a toolholder or collet rated for a 16 mm shank is required for secure mounting. How is the insert secured to the cutter? An M2.5x7 Torx screw secures the insert; the screw is tightened using a T8 Torx key to ensure a repeatable and reliable clamp. Is the cutter suitable for high-volume production runs? Yes — the replaceable-insert design and the robust shank-to-holder fit support repeatability and reduced downtime, making it suitable for serial production and frequent tool changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
18mm Cutter For APXT 1003 Indexable Inserts 2 Flutes 45mm Cutting Length, 90° - Teknik Makina
Take advantage of the combination of insert compatibility, a robust 16 mm shank and an Ø18 mm cutting diameter to secure stable, repeatable milling performance; order directly via Metav Werkzeuge or consult our specialists for holder matching and delivery options. S164TM — Shank cutter for APXT 1003 indexable inserts, Ø18 mm, 16 mm shank (Teknik Cutting Tools) The S164TM is a shank cutter designed for mounting APXT 1003 indexable inserts, offering a compact solution for short-to-medium length milling operations in production and workshop settings. Compatible with APXT 1003 indexable inserts Ø18 mm cutting diameter 16 mm shank for standard toolholders Two cutting edges for stable milling Precision and stability for consistent milling results The cutter is engineered to deliver predictable chip control and repeatable geometry through its two-flute layout and a true 90° cutting angle. The combination of an Ø18 mm diameter with a 16 mm shank reduces overhang and vibration when mounted in standard holders, which translates into improved surface finish and extended insert life. For operations where cycle time and part quality are critical, this design enhances process reliability by supporting consistent engagement and stable cutting forces. Fast insert changes minimise downtime The clamping solution uses a Torx screw (M2.5x5.5) tightened with a T8 key, enabling rapid and secure indexable insert changes. This mechanical simplicity reduces changeover times and lowers the chance of incorrect seating compared with more complex clamping systems. When paired with APXT 1003 inserts from suppliers such as Korloy, the tool enables quick restoration of cutting performance on the shop floor, making it suitable for both frequent maintenance cycles and uninterrupted production runs. Practical design for workshop and production use With an overall length of 120 mm and a cutting length of 45 mm, the shank cutter balances reach with rigidity for many common milling tasks. The modest weight of 0.19 kg contributes to easier handling during tool setup and fewer balance concerns in high-speed spindles. This shank-mounted solution is particularly useful where inventory simplicity is valued: the same holder families and clamping fixtures used for other 16 mm shank tooling can be retained, simplifying toolroom logistics and reducing tooling stock complexity. For assured performance with this Teknik Cutting Tools shank cutter, contact Metav Werkzeuge for matching toolholders and fast delivery from Emmerich; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: S164TM Designation: Shank cutter for APXT 1003 indexable inserts Brand: Teknik Cutting Tools Key measurements Diameter: 18 mm Shank diameter: 16 mm Cutting length: 45 mm Overall length: 120 mm Cutting edges: 2 Weight: 0.19 kg Features & compatibility For APXT 1003 indexable inserts Compatible insert supplier: Korloy Torx screw: M2.5x5.5 Torx key size: T8 Cutting angle: 90° FAQ What types of inserts fit this cutter? The cutter is intended for APXT 1003 indexable inserts; it is compatible with inserts from vendors listed as suitable, for example Korloy. How is the insert secured in the cutter? An M2.5x5.5 Torx screw secures each insert; a T8 key is required for clamping and removal on the S164TM shank cutter. What are the primary advantages of this shank-mounted solution? The primary benefits are reduced overhang with a 16 mm shank, stable cutting from the two-flute geometry and fast insert changes that help keep production uptime high. Is the cutter suitable for production environments? Yes. The combination of an Ø18 mm diameter, short cutting length and robust clamping makes the tool appropriate for repetitive production tasks where changeover speed and consistency matter. What should be checked before fitting the tool to a holder? Verify holder compatibility with a 16 mm shank and confirm the correct seating for APXT 1003 inserts; ensure the Torx screw torque is applied according to workshop best practice. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
18mm Cutter For APXT 1003 Indexable Inserts 2 Flutes 90° Cutting Angle 30mm Cutting Length, 16mm Shank - Teknik Makina
Take advantage of the combination of precise compatibility with APXT 1003 indexable inserts and a compact, shank-mounted design to maintain consistent machining accuracy. The robust clamping with a Shank Ø16 mm and Ø18 mm cutting diameter ensures stable performance and repeatable results. Order directly via Metav Werkzeuge or consult the Metav team for application advice. Shaft milling cutter S142TM – Indexable insert cutter, Ø18 mm, for APXT 1003 The Shaft milling cutter S142TM is a shank-mounted milling tool developed for use with APXT 1003 indexable inserts, suited to general milling operations where fast insert changes and secure clamping are required. Ø18 mm cutting diameter Shank Ø16 mm for secure clamping Fits APXT 1003 indexable inserts Two cutting edges, 90° cutting angle Consistent insert compatibility and quick servicing The holder is designed specifically for APXT 1003 inserts, providing a standardised interface that simplifies tool management in mixed fleets. Compatibility with Korloy indexable inserts reduces the need for multiple tool holders and streamlines inventory. The clamping fastener specification—M2.5x5.5 Torx screw with a T8 key—guarantees repeatable seating of inserts and straightforward replacement, so downtime for maintenance is minimised while process stability is maximised. Stable shank design for repeatable accuracy A solid Shank Ø16 mm provides secure seating in compatible toolholders, reducing runout and improving surface finish consistency. The Ø18 mm cutting diameter and 30 mm cutting length balance accessibility and rigidity for a range of milling tasks. With two cutting edges and a 90° cutting angle, the tool delivers predictable chip formation and stable cutting forces, which supports more consistent component quality and easier process parameter definition. Workshop efficiency through simple integration With an overall length of 100 mm and a compact mass of 0.162 kg, the cutter is straightforward to handle and fits most standard shank clamping systems of the appropriate size. The design focuses on ease of insert replacement and predictable maintenance intervals, helping to reduce tooling logistics overhead. As a result, purchasing the S142TM supports operational continuity and a lower total cost of ownership where rapid insert changes and reliable positioning are priorities. For technical matching or to arrange supply of the Teknik Cutting Tools S142TM through Metav Werkzeuge, please contact Metav Werkzeuge for professional advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S142TM Designation: Shaft milling cutter Secondary designation: for APXT 1003 indexable inserts Manufacturer: Teknik Makina Data Cutting diameter: 18 mm Shank diameter: 16 mm Cutting length: 30 mm Overall length: 100 mm Number of cutting edges: 2 Cutting angle: 90° Weight: 0.162 kg Special features Fits APXT 1003 indexable inserts Compatible with Korloy indexable inserts Torx screw M2.5x5.5; Torx key T8 FAQ Which insert type does this cutter accept? The cutter is designed for APXT 1003 indexable inserts; the interface matches the APXT 1003 geometry for reliable seating. Is the S142TM compatible with Korloy inserts? Yes, the tool is listed as compatible with Korloy indexable inserts that conform to the APXT 1003 specification. What size shank is required for clamping? A 16 mm shank clamping system is required; the cutter has a Shank Ø16 mm to ensure correct mounting and stable performance. Which fastening components are used to secure the insert? Insert retention uses an M2.5x5.5 Torx screw and requires a T8 Torx key for secure and repeatable attachment. What are the key dimensions to consider for fixture planning? Important dimensions include the Ø18 mm cutting diameter, 30 mm cutting length and 100 mm overall length, which should be considered during fixture and toolholder selection. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
18mm Cutter For APXT 1003 Indexable Inserts 2 Flutes 90° Cutting Angle 60mm Cutting Length, 16mm Shank - Teknik Makina
Combining an indexable-insert system with a robust 18 mm cutting diameter and a 16 mm shank delivers fast cycle times and dependable tool stability; order via Metav Werkzeuge for dependable supply or consult our specialists for application-specific guidance. Shank Milling Cutter S184TM — for APXT 1003 indexable inserts, Ø18 mm, 60 mm cutting length (Teknik Makina) The Shank Milling Cutter S184TM is a precision shank cutter designed for productive milling with APXT 1003 indexable inserts, suited to roughing and semi-finish operations where rapid insert changes and consistent geometry are required. Indexable system for APXT 1003 inserts 18 mm cutting diameter for versatile milling 16 mm shank for stable clamping Two cutting edges with 90° cutting angle Increased machining efficiency through insert technology The combination of an indexable-insert system and a defined 18 mm cutting diameter reduces downtime for regrinding and keeps spindle utilisation high. Using replaceable APXT 1003 inserts means the cutting edge is renewed within seconds, so cycle times are shortened and process consistency improves. The available 60 mm cutting length supports deeper passes than shorter tools, enabling effective material removal without frequent tool changes. The design focuses on predictable performance on repetitive milling tasks, making the cutter a practical choice where throughput and consistency matter. Stable toolholding and precise geometry for repeatable results A solid 16 mm shank gives the necessary rigidity for stable clamping in standard collets or shrink-fit holders, which helps to reduce chatter and improve surface finish. The cutter's relatively low mass (approx. 0.35 kg) and balanced form assist with runout control and tool life. The 90° cutting angle and two cutting edges provide a straightforward cutting geometry that is simple to set up and predictable in behaviour, so technicians can rely on repeatable results across batches without complex parameter tuning. Fast assembly and clear compatibility for workshop use Assembly and indexable-insert replacement are kept simple: the cutter uses a Torx screw M2.5x5.5 secured with a T8 torx key, allowing quick, reliable clamping of inserts and minimal downtime during changeover. Compatibility with APXT 1003 inserts — commonly supplied by Korloy — means inserts are readily available from standard distributors, simplifying logistics and inventory management. The design emphasises practical serviceability, making it suitable for both jobbing shops and production environments where quick maintenance is essential. Practical applications and when to specify this cutter This shank cutter is intended for general milling tasks that benefit from indexable-insert systems: shoulder milling, pocketing, and medium- to heavy-duty passes where removal rates and fast edge replacement are priorities. Specify the cutter where tooling strategies favour insert-based solutions to reduce tooling cost per edge and to keep machine uptime high. The combination of diameter, cutting length and insert format makes it a flexible option for production lines and workshop setups seeking efficient, repeatable milling without special tooling changes. Contact Metav Werkzeuge for tailored technical advice and reliable supply of the Teknik Cutting Tools Shank Milling Cutter S184TM; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: S184TM Brand: Teknik Makina Product: Shank milling cutter for APXT 1003 indexable inserts ECLASS: 21180806 ETIM: EC011860 Files: 62de7eecbd24461b3d5f7a7d, 62de7e5c0f56dbb4de4dbf0f Dimensions & core data Diameter: 18 mm Shank diameter: 16 mm Cutting length: 60 mm Overall length: 200 mm Number of cutting edges: 2 Cutting angle: 90° Weight: 0.35 kg Compatibility & assembly Compatible inserts: APXT 1003 Compatible insert manufacturer: Korloy Torx screw: M2.5x5.5 Torx key: T8 Indexable-insert format for quick replacement FAQ Which inserts are compatible with this cutter? The cutter accepts APXT 1003 indexable inserts; Korloy-manufactured APXT 1003 inserts are commonly used with this shank milling cutter S184TM (Teknik Makina). How is the tool secured in the spindle and how is the insert fixed? The tool has a 16 mm shank for standard clamping systems; inserts are secured with a Torx screw M2.5x5.5 tightened using a T8 torx key for reliable seating. What are the main cutting dimensions to consider for programming? Key dimensions are Ø 18 mm cutting diameter, 60 mm cutting length, and 200 mm overall length; these values guide depth of cut and reach planning for the S184TM cutter. How many cutting edges does the cutter have and what is the cutting angle? The cutter is equipped with two cutting edges and a 90° cutting angle, providing a balanced geometry for shoulder and face milling operations. Is insert replacement quick and suitable for production environments? Yes — the indexable design and Torx screw fastening enable rapid insert changes, making the Teknik Cutting Tools shank cutter S184TM appropriate for production settings that require short tool-change times. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
18mm End Mill for ADKT 10T3 Indexable Inserts with Internal Coolant, 100mm Length - Teknik Makina
Take advantage of the combination of precise insert clamping, targeted coolant delivery and a compact shank design for reliable milling performance in production environments — order directly via Metav Werkzeuge or consult the sales team for application support. Schaftfräser for ADKT 10T3 – 18 mm shank milling cutter with internal coolant (Teknik Makina) A robust Schaftfräser engineered for stable indexable-insert milling in workshop and light industrial applications 18 mm cutting diameter Internal coolant channel Compatible with ADKT 10T3 inserts 16 mm shank diameter for secure clamping High productivity through an indexable-insert concept The cutter is built around the ADKT 10T3 indexable-insert system, which allows fast insert changes and consistent cutting performance. By using replaceable inserts rather than regrinding a solid tool, the solution reduces downtime and lowers per-part tooling cost. The two-edged configuration supports steady chip load distribution while the compatible insert geometry, endorsed for use with Korloy inserts, simplifies stock management for maintenance teams. Improved tool life and thermal control with internal coolant An integrated internal coolant channel directs cutting fluid precisely to the insert tip, which moderates cutting temperatures and improves chip evacuation. This targeted cooling helps maintain cutting edge integrity over longer cycles and reduces the risk of heat-related wear. For operations where cycle time and repeatability matter, the coolant feed contributes directly to process stability and predictable reconditioning intervals for the insert system. Secure mounting and practical handling in the machine tool Designed with a 16 mm shank diameter and an overall length of 100 mm, the cutter balances rigidity with reach for typical milling set-ups. The 35 mm cutting length offers a defined engagement zone for slotting and peripheral milling tasks. Insert retention is accomplished with a Torx screw ( M2.5x5.5 ) secured via a T8 Torx key, enabling quick, reliable clamp changes during maintenance and minimising handling errors on the shop floor. Practical benefits for workshop procurement and maintenance Compact and lightweight, with a mass of 0.12 kg, the tool is easy to store and swap in multi‑cutter toolholders. The modular design and compatibility with widely available ADKT 10T3 inserts simplify inventory and support predictable replacement schedules. For procurement teams seeking a balance of serviceability and machining performance, this shank milling cutter provides a pragmatic option without requiring bespoke insert types. For enquiries about application suitability or to arrange procurement via Metav Werkzeuge, contact Metav Werkzeuge for tailored advice on Teknik Makina cutters and compatible inserts. Technical Data Article number: S076TM Manufacturer: Teknik Makina Product type: Shank milling cutter SKU: S076TM Dimensions & core data Cutting diameter: 18 mm Overall length: 100 mm Shank diameter: 16 mm Cutting length (shank): 35 mm Number of cutting edges: 2 Weight: 0.12 kg Materials & special features Internal coolant: yes Compatible inserts: ADKT 10T3 Compatible insert manufacturer: Korloy Insert screw: M2.5x5.5 Torx key: T8 FAQ Which insert types fit this cutter? The cutter accepts ADKT 10T3 indexable inserts; Korloy-manufactured inserts in this geometry are compatible with the clamping system. How is coolant delivered to the cutting edge? Internal coolant is fed through the tool body to the insert pocket, ensuring directed cooling at the cutting zone and aiding chip removal during machining. What are the key mounting dimensions to check before ordering? Confirm the 16 mm shank diameter and 100 mm overall length match the machine holder specifications; the SKU for reference is S076TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
18mm End Mill for BDMT 11T3 Indexable Inserts Internal Coolant, 150mm Overall - Teknik Makina
Take advantage of a compact, insert-based milling solution that combines the ease of indexable insert changes with internal coolant for improved tool life and surface finish; order directly via Metav Werkzeuge or request tailored advice from our specialists. S566-1TM — 18 mm shank milling cutter for BDMT 11T3 indexable inserts (internal coolant) by Teknik Makina S566-1TM is a shank milling cutter designed for BDMT 11T3 indexable inserts, offering internal coolant and a compact geometry for reliable face and slot milling in production and toolroom settings. 18 mm diameter for compact milling Internal coolant for optimised chip evacuation Compatible with BDMT 11T3 indexable inserts 16 mm shank with 44 mm cutting length Increased throughput with insert-based milling The S566-1TM delivers a pragmatic route to higher productivity through its indexable design. Using BDMT 11T3 inserts allows rapid insert replacement without reclamping the tool, reducing machine downtime and simplifying inventory of cutting edges. The combination of an 18 mm cutter diameter and a 16 mm shank makes the tool suitable for tight setups while maintaining stability, and the incorporation of internal coolant improves heat management to extend insert life and maintain consistent surface quality. Consistent results and simplified maintenance A clear benefit of the insert system is predictable maintenance cycles. The tool’s geometry—notably the 44 mm cutting length and the two cutting edges—supports controlled chip formation and even wear distribution, which helps sustain dimensional accuracy over runs. The internal coolant feed reduces thermal distortion at the cutting zone and assists chip evacuation, lowering the risk of built-up edge and improving repeatability across batches. Fast fastenings using a Torx T8 key and M2.5x5.5 screws ensure service tasks are straightforward. Practical workshop integration and tool handling Designed for integration with common insert suppliers, the cutter is explicitly compatible with Kyocera-manufactured inserts for BDMT 11T3, simplifying procurement and replacement. The tool’s modest weight (0.241 kg) and shank form ease handling and tool changes, while the robust indexable approach supports both occasional and continuous use in diverse milling tasks. For scenarios where process parameters need refinement, technical advice is available to match insert grade and cutting data to the material and cutting strategy. For availability and process recommendations on the Teknik Makina S566-1TM with internal coolant, contact Metav Werkzeuge for personalised guidance and stock information. Technical data Article number: S566-1TM Product type: Shank milling cutter Manufacturer: Teknik Makina SKU: S566-1TM Facts Diameter: 18 mm Overall length: 150 mm Shank diameter: 16 mm Cutting length (shank): 44 mm Number of cutting edges: 2 Weight: 0.241 kg Special features Internal coolant: yes Insert type: BDMT 11T3 Compatible insert manufacturer: Kyocera Torx key: T8 Torx screw: M2.5x5.5 FAQ Which inserts fit this milling cutter? The S566-1TM accepts BDMT 11T3 indexable inserts; Kyocera-manufactured BDMT 11T3 inserts are specified as compatible. Is the cutter suitable for through-coolant applications? Yes, the tool features internal coolant to support improved chip evacuation and thermal control at the cutting edge. What shank size is required in the toolholder? The cutter has a 16 mm shank; choose a matching holder or collet system that secures a 16 mm shank. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
18mm End Mill for Korloy RPMW 0803 inserts - Teknik Makina
Product Information: Order Number: R311TM Item: End Mill usable with RPMW 0803 Indexable Inserts the Hersteller's Korloy Brand: Teknik Makina Metric Information: Diameter: 18mm Cutting Edges: 2 Total length: 150mm Diameter Connection: 16mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
18mm End Mill For LNMX 0603 Indexable Inserts Internal Coolant, 16mm Shank - Teknik Makina
Increase machining efficiency with the combination of internal coolant and compatibility with LNMX 0603 indexable inserts, delivering consistent chip control and prolonged insert life. Benefit from the stable 16 mm shank and 40 mm cutting length for reduced vibration and reliable production. Order the shaft cutter directly via Metav Werkzeuge or request advice from Metav's consultants. Shaft cutter S284-4TM for LNMX 0603 indexable inserts — 18 mm, internal coolant (Teknik Makina) The Shaft cutter S284-4TM is a robust indexable milling tool designed for workshops and production lines using LNMX 0603 inserts, combining coolant-through performance with a compact 18 mm tool body for versatile metalworking tasks 18 mm cutter diameter with 16 mm shank Internal coolant supply for improved chip evacuation Compatible with LNMX 0603 indexable inserts 40 mm cutting length for stable engagement Faster cycles through controlled coolant and chip flow The integration of internal coolant directly to the cutting zone enables effective cooling and chip evacuation, which reduces thermal load on the insert and lowers the risk of built-up edge. With an 18 mm tool diameter and 2 cutting edges, the cutter supports higher metal removal rates while maintaining surface quality. This combination of coolant-through design and optimised geometry translates into shorter cycle times and a reduced frequency of insert changes, improving overall throughput without compromising dimensional accuracy. Rigid shank design for repeatable accuracy and minimal deflection A 16 mm shank provides a secure clamping interface that reduces torsional displacement during heavy cuts, while the 40 mm cutting length limits overhang to help sustain cutting stability. Fast insert securing is achieved with the supplied M3x7 Torx screw and T8 key, enabling quick replacement of LNMX 0603 inserts and minimal downtime. The result is a milling solution that supports consistent surface finishes and repeatable results across batch runs, helping production planners reduce scrap and rework. Easy integration into existing indexable systems and workshop workflows Designed for compatibility with Korloy LNMX 0603 inserts, the tool slots directly into toolholders and systems already standardised on this insert family. The compact mass of the tool and clearly defined mechanical interfaces simplify inventory management and tooling setups. Backed by Metav's experience as a precision partner, the cutter can be specified with confidence for jobs that demand predictable performance and straightforward maintenance, making it a pragmatic option for machining centres and subcontract workshops alike. Contact Metav Werkzeuge for a tailored technical consultation regarding the Teknik Makina shaft cutter and to arrange supply from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and delivery options Technical data Article number: S284-4TM Product: Shaft cutter for LNMX 0603 indexable inserts Manufacturer: Teknik Makina Diameter: 18 mm Shank diameter: 16 mm Overall length: 100 mm Cutting length: 40 mm Number of cutting edges: 2 Weight: 0.14 kg Torx screw: M3x7 Torx key: T8 Internal coolant: yes Special features Compatibility: LNMX 0603 indexable inserts (Korloy) Coolant-through design Compact tool body for reduced overhang Quick insert change with Torx fastening FAQ Which inserts fit this shaft cutter? The shaft cutter accepts LNMX 0603 indexable inserts and is specified for inserts from Korloy in standard configurations. Is the cutter suitable for coolant-through applications? Yes, the tool features internal coolant to feed coolant directly to the cutting edge, improving tool life and chip control. What is the shank size and how does it affect rigidity? The cutter has a 16 mm shank, which offers a secure clamping interface that helps reduce deflection during machining. How are the inserts secured and what tools are needed? Inserts are fastened with an M3x7 Torx screw tightened using a T8 key for quick and reliable replacement. Can the cutter be used in existing toolholder systems? The cutter is designed to integrate into holders compatible with an 18 mm body and a 16 mm shank, facilitating straightforward adoption into current setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
18mm Shank Cutter for BDMT 11T3 Indexable Inserts 90° 2 Flute 44mm Cutting Length 150mm Overall - Teknik Makina
Reliable milling performance meets straightforward maintenance: compatibility with BDMT 11T3 indexable inserts and a 16 mm shank deliver stable cutting and predictable tool life, while the quick Torx clamping reduces downtime. Order the Shank cutter S566TM directly via Metav Werkzeuge or ask our consultants if needed. Shank cutter S566TM — 18 mm, for BDMT 11T3 indexable inserts (Teknik Makina) The Shank cutter S566TM is a compact milling tool designed for use with BDMT 11T3 indexable inserts, offering a rigid 16 mm shank for reliable workshop integration. Indexable system for BDMT 11T3 inserts 16 mm shank for high rigidity 18 mm diameter with 90° cutting angle Fast insert clamping with Torx M2.5x5.5 Consistent indexable performance for shorter cycle times The tool is built around the BDMT 11T3 indexable system, which simplifies tool management and reduces setup complexity. Thanks to the standardised insert interface and Kyocera compatibility, spare parts and replacements are straightforward. The combination of a compact 18 mm cutting diameter and a secure Torx fastening (Torx M2.5x5.5 with T8 key) delivers predictable clamping force, translating into stable cutting conditions and fewer micro-adjustments between cycles. This consistency supports faster production rhythms and lowers overall process variance. Built for rigidity and predictable surface quality A solid 16 mm shank and a 44 mm cutting length provide the mechanical stiffness required for repeatable machining results. The cutter’s 2-flute geometry and a 90° cutting angle are selected to balance chip evacuation and tool engagement, which helps maintain edge condition over time. As a result, operators benefit from improved surface finish and reduced vibration, meaning less rework and longer intervals between insert changes. The tool’s overall length of 150 mm offers a practical reach while maintaining torsional stability. Designed for quick maintenance and smooth workshop flow Serviceability is a key advantage: insert changes are executed via the Torx clamping screw, minimising downtime and allowing the workshop to maintain throughput. The S566TM’s lightweight construction (approx. 0.24 kg) eases handling during set-up and reduces spindle load during acceleration. Clear, standardised dimensions—16 mm shank, 18 mm diameter, 44 mm cutting length—enable straightforward tool list management and inventory control. Reliable supply and a quality filter from Metav Werkzeuge in Emmerich ensure rapid replenishment so production can continue without lengthy interruptions. Contact Metav Werkzeuge for supply and application advice on the Teknik Cutting Tools S566TM, supplied directly from Emmerich and ready to integrate into workshop production Technical Data SKU: S566TM Manufacturer: Teknik Makina Article name: Shank cutter for BDMT 11T3 indexable inserts Compatible inserts: BDMT 11T3 Compatible insert manufacturer: Kyocera Core specifications Shank diameter: 16 mm Cutting diameter: 18 mm Cutting length: 44 mm Overall length: 150 mm Number of flutes: 2 Cutting angle: 90° Weight: 0.24 kg Features & compatibility Torx screw: M2.5x5.5 Torx key: T8 For BDMT 11T3 indexable inserts Designed for indexable milling applications FAQ Which inserts fit this cutter? The cutter is designed for BDMT 11T3 indexable inserts; compatible inserts from Kyocera are supported. What is the shank diameter and why it matters? The 16 mm shank of the S566TM provides increased rigidity and helps to reduce vibration for more consistent machining results. How is the insert secured? Inserts are clamped with a Torx screw M2.5x5.5, loosened and tightened using a T8 key for quick, repeatable clamping. How many cutting edges are available? The tool features 2 flutes, balancing chip clearance and engagement for typical indexable insert operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
18mm Shank Milling Cutter for APKT 1003 Indexable Inserts L150mm With Internal Coolant - Teknik Makina
Benefit from robust insert clamping, integrated internal coolant and a compact 16 mm shank for consistent milling performance; order the cutter directly via Metav Werkzeuge or consult our tooling specialists for application support. 18 mm Shank Milling Cutter S174-1TM – Shank milling cutter for APKT 1003 indexable inserts, internal coolant (Teknik Makina) The shank milling cutter S174-1TM is designed for secure insert retention and efficient chip evacuation in general workshop and light industrial milling applications. 18 mm cutter diameter with 150 mm overall length Internal coolant for improved chip evacuation Compatible with APKT 1003 indexable inserts (Korloy) Robust 16 mm shank, two cutting edges Longer uninterrupted cycles through optimal coolant routing The integrated internal coolant circuit channels cutting fluid directly to the cutting zone, which reduces heat build-up and supports stable cutting conditions. This targeted cooling shortens tool-change intervals and helps to maintain consistent cutting forces, resulting in longer uninterrupted machining cycles and improved process reliability. For operations requiring sustained contact with the workpiece, the focused coolant supply contributes to more predictable tool life and repeatable results. Secure clamping and reduced vibration for consistent surface quality A rigid 16 mm shank combined with precise insert mounting delivers high torsional stability and reduced vibration during milling. The two-cutting-edge configuration promotes balanced load distribution across the insert seats, improving surface finish and dimensional consistency. These mechanical advantages translate into fewer reworks and a more stable production output when performing slotting, shoulder milling or light face milling tasks. Flexible compatibility for quick integration into existing toolsets Designed to accept APKT 1003 indexable inserts and compatible with Korloy-specified grades, the cutter adapts to diverse machining tasks by simply selecting the appropriate insert geometry and grade. The 150 mm overall length with a 50 mm cutting-head length gives a versatile reach for typical workshop set-ups, while the compact diameter supports tight fixture clearances. This flexibility allows for straightforward tool changeover and rapid adaptation to different machining programmes. Fast insert changes and straightforward maintenance Insert retention uses a Torx system with a T8 key and a standard M2.5×5.5 screw, enabling quick and safe insert replacement with commonly available maintenance tools. The simple fastening method reduces downtime during routine service and supports controlled torque application to maintain clamping reliability. Regular inspection and correct torque on the replacement screws help preserve the cutter’s repeatable performance over multiple insert life cycles. For specification checks, cutter selection or to arrange supply from Emmerich, contact Metav Werkzeuge for expert assistance and fast delivery: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: S174-1TM Manufacturer: Teknik Makina Product: Shank milling cutter for APKT 1003 indexable inserts Dimensions & core data Diameter: 18 mm Overall length: 150 mm Shank diameter: 16 mm Cutting length: 50 mm Number of cutting edges: 2 Weight: 0.246 kg Features & compatibility Internal coolant: yes Compatible inserts: APKT 1003 Compatible insert manufacturer: Korloy Torx key: T8 Torx screw: M2.5×5.5 FAQ How are inserts secured in this cutter? The inserts are secured with a Torx screw (M2.5×5.5) using a T8 tool; the S174-1TM by Teknik Makina uses standardised clamping for quick and reliable changes. Is the coolant internal or external? The cutter is fitted with internal coolant, which directs fluid to the cutting zone to improve chip evacuation and thermal control. Which insert type fits this cutter? This shank milling cutter accepts APKT 1003 indexable inserts and is compatible with inserts from Korloy. What shank diameter is required for the holder? The tool features a 16 mm shank, suitable for holders and collets designed for that diameter. What operations is the cutter best suited to? The design supports a range of milling tasks including light face milling, shoulder milling and slotting where compact diameter and coolant-fed performance are advantageous. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
18mm Solid End Mill for APKT 1003 Indexable Inserts with Internal Coolant, 100mm L - Teknik Makina
Benefit from reliable chip control and compact rigidity thanks to the internal coolant and the tool's 18 mm cutting diameter; this combination improves tool life and process stability. Order the S142-1TM shank milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Shank milling cutter S142-1TM – 18 mm, internal coolant, for APKT 1003 indexable inserts (Teknik Makina) Shank milling cutter S142-1TM designed for indexable-insert face and slot milling in general machining applications 18 mm cutting diameter with 2 cutters Internal coolant for improved chip evacuation Compatible with APKT 1003 indexable inserts 16 mm shank for secure toolholder clamping Torx T8 screw system for fast insert changes Faster stable machining with coolant-fed chip control The coolant-fed design with an integrated internal coolant channel promotes consistent chip evacuation and reduces heat at the cutting zone, leading to more stable cutting conditions and fewer built-up edges. With an 18 mm cutting diameter and 2 cutting edges, the tool balances material removal rate and surface finish for many common milling tasks. This configuration helps to maintain process reliability on short-cycle production runs and improves insert life by flushing chips away from the cutting zone. Secure clamping and rigidity for repeatable results A 16 mm shank provides high torsional stability in clamping systems, reducing vibration and enhancing dimensional repeatability. The modest overall length of 100 mm, combined with a 30 mm effective cutting length, keeps the tool’s overhang low so that the machining centre or milling head can exploit stiffer setups. As a result, the cutter delivers consistent edge life and quieter running, which supports higher first-pass yields in batch production. Flexible insert system for economical operation Designed for use with APKT 1003 indexable inserts (compatible with Korloy), the cutter allows fast, cost-effective insert changes and tool reconditioning without replacing the body. The Torx T8 screw and M2.5x5.5 screw specification ensure quick, secure fastening of inserts, reducing downtime during tool changes. Choosing standard inserts keeps tooling costs predictable and simplifies inventory management across multiple machine tools. Practical maintenance and application guidance The cutter is engineered for straightforward handling: the insert system and Torx screw arrangement enable quick servicing on the workshop floor, while the internal coolant port requires only standard coolant connections. For applications where material mix or machining parameters vary, this compact cutter is suitable for steel and aluminium operations when used with the correct insert grade. Metav Werkzeuge’s product range and advisory services can help match insert geometry and grade to specific applications for optimal performance. Discuss Teknik Makina's S142-1TM with Metav Werkzeuge in Emmerich — contact our specialists at info@metav-werkzeuge.com or +49 2822 7131930 for application advice and supply options Technical data SKU: S142-1TM Label: 18mm Schaftfräser APKT 1003 L100mm mit Innenkühlung Manufacturer: Teknik Makina ECLASS: 21180806 Facts Cutting diameter: 18 mm Overall length: 100 mm Shank diameter: 16 mm Cutting length: 30 mm Weight: 0.162 kg Number of cutting edges: 2 Special features Internal coolant For APKT 1003 indexable inserts Compatible insert manufacturer: Korloy Torx key: T8 Torx screw: M2.5x5.5 FAQ Which insert type fits this cutter? The cutter is designed for APKT 1003 indexable inserts; Korloy-compatible grades are commonly used for reliable performance. Is the tool cooled internally? Yes, the S142-1TM features internal coolant to improve chip evacuation and reduce thermal load at the cutting edge. What shank size is required in the toolholder? A 16 mm shank is specified; ensure the toolholder matches this diameter for proper clamping and rigidity. How many cutting edges does the cutter have? The tool is supplied with 2 cutting edges, providing a balance between material removal and surface finish. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
18mm Solid End Mill for RPMT 0803 Indexable Inserts With Internal Coolant, 150mm - Teknik Makina
Take advantage of the combination of internal coolant, precise RPMT 0803 insert compatibility and a compact 150 mm overall length to keep changeover times short and machining consistent; order the Teknik Makina shank milling cutter directly via Metav Werkzeuge or ask our consultants for tailored advice. Shank milling cutter for RPMT 0803 indexable inserts – 18 mm cutting diameter, internal coolant (Teknik Makina) Shank milling cutter for RPMT 0803 indexable inserts designed for stable pocketing and face milling in workshop and light industrial applications, with internal coolant supply and a compact shank form. Internal coolant for improved chip evacuation Compatible with RPMT 0803 indexable inserts 18 mm cutting diameter for stable cutting 35 mm cutting length for deeper engagement Fast insert clamping with T8 Torx access Higher throughput through stable geometry and coolant feed The compact 18 mm cutting diameter combined with a 16 mm shank delivers a balanced stiffness-to-size ratio that reduces vibration and improves surface finish in repetitive milling tasks. Integrated internal coolant channels support consistent coolant delivery directly to the cutting edge, which enhances chip evacuation and helps prolong insert life. These characteristics translate into measurable productivity gains on batch runs and shorter rework cycles when using RPMT-style indexable tooling. Easy, secure insert changes to reduce downtime Equipped for RPMT 0803 indexable inserts and secured by an M3x7 Torx screw accessible with a T8 key, the cutter enables quick, repeatable insert changes without complex tools. The two cutting edges provide clear indexing points and straightforward balancing for feed and speed adjustments. This straightforward clamping concept reduces tool-change times and supports reliable set-up in multi-shift environments. Compact build for versatile fixture and machine compatibility With an overall length of 150 mm and a dedicated 16 mm shank, the tool fits compact toolholders and smaller machining centres while still allowing a 35 mm effective cutting length for deeper passes. The compact mass (approx. 0.241 kg) eases toolholder balance requirements and simplifies tool management. Where space and rigidity are both constraints, this shank cutter offers a pragmatic compromise between reach and stability. Practical advantages in daily workshop use Compatibility with Korloy RPMT 0803 inserts ensures easy sourcing of replacement cutting edges and familiar insert geometries for standard finishing or roughing shares. The internal coolant not only improves thermal control but also supports cleaner chip flow for materials where chip control is critical. The modest number of cutting edges simplifies regrinding and replacement logistics while maintaining consistent chip removal behaviour. For reliable high-performance milling with internal coolant and proven RPMT compatibility, contact Metav Werkzeuge for ordering and expert technical advice on the Teknik Makina shank milling cutter R311-1TM — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific machining tasks Technical data SKU: R311-1TM UID: R311-1TM ECLASS: 21180806 Label: 18mm shank milling cutter RPMT 0803 L150mm with internal coolant Core specifications Cutting diameter: 18 mm Shank diameter: 16 mm Overall length: 150 mm Cutting length (shank/edge): 35 mm Number of cutting edges: 2 Weight: 0.241 kg Features & compatibility Internal coolant: yes Compatible inserts: RPMT 0803 Compatible insert manufacturer: Korloy Torx screw: M3x7 Torx key: T8 Manufacturer: Teknik Makina FAQ What insert type fits this cutter? The cutter accepts RPMT 0803 indexable inserts; Korloy-compatible RPMT 0803 grades are suitable for typical finishing and light roughing applications. Is internal coolant provided and how does it help? Yes — the tool features internal coolant delivery to the cutting zone, which improves chip evacuation and helps extend insert life under continuous machining. What are the main mounting dimensions to check on the toolholder? Key dimensions are the 16 mm shank and 150 mm overall length; these determine holder compatibility and reach for the Teknik Makina cutter R311-1TM. Which screw and key are required for insert clamping? Insert clamping uses an M3x7 Torx screw tightened with a T8 key, enabling quick and repeatable insert changes. How many cutting edges does the tool have and what is the effective cutting length? The tool has 2 cutting edges and an effective cutting length of 35 mm, suitable for deeper passes within the cutter’s diameter class. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
18mm Solid Shank Milling Cutter for APKT 1003 Indexable Inserts with Internal Coolant, 16mm Shank - Teknik Makina
Combining an 18 mm cutting diameter with internal coolant and compatibility for APKT 1003 indexable inserts, this TekniK milling cutter delivers coolant-fed, stable metal removal and straightforward insert changes; order directly via Metav Werkzeuge or consult our specialists for machining optimisation. 18 mm Shank Milling Cutter for APKT 1003 Indexable Inserts — L120 mm, internal coolant 18 mm shank milling cutter for coolant-fed milling with APKT 1003 indexable inserts, designed for stable, repeatable machining in series production and job-shop environments 18 mm cutter diameter Internal coolant for chip control Compatible with APKT 1003 inserts 16 mm shank and 45 mm cutting length Coolant-fed cutting for consistent chip control and tool life The combination of a dedicated internal coolant channel and a compact cutting geometry ensures effective chip evacuation directly at the cutting edge. Controlled coolant delivery reduces heat at the insert edge, which contributes to longer insert life and steadier cutting forces. This design is particularly useful when using APKT 1003 inserts in interrupted cuts or when optimising tool life in multi-shift production. Secure insert clamping and easy service for high uptime A robust clamping system with a Torx T8 drive and a M2.5x5.5 fastening screw simplifies insert changes and secures repeatable seating. With just two cutting edges and a short 45 mm cutting length, the tool supports rapid indexable insert swaps while maintaining balance and surface quality. These features reduce maintenance time and support uninterrupted production cycles in busy machine shops. Stiffness and stability from optimised shank geometry An 18 mm cutter diameter paired with a 16 mm shank provides a favourable rigidity-to-length ratio across the 120 mm overall length, reducing chatter and improving dimensional accuracy. The compact mass (approx. 0.191 kg) and the short overhang help maintain spindle load within safe limits, resulting in improved finish and extended insert intervals on both roughing and finishing passes. Practical suitability and shop-floor integration Engineered for use with Korloy-compatible APKT 1003 inserts, the tool suits a wide variety of milling tasks where indexable systems are preferred for economy and flexibility. It is aimed at production engineers and workshop managers seeking a coolant-fed, indexable solution that balances ease of maintenance with predictable performance. For complex setups, Metav Werkzeuge offers application advice and material-specific recommendations to ensure optimum results. Arrange a technical consultation with Metav Werkzeuge to match insert grades and cutting parameters to the machining task; contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised guidance Technical data Article number: S164-1TM SKU: S164-1TM Product type: Shank milling cutter Label: 18 mm shank milling cutter APKT 1003 L120mm with internal coolant Manufacturer: Teknik Makina Facts Diameter: 18 mm Shank diameter: 16 mm Overall length: 120 mm Cutting length: 45 mm Cutting edges: 2 Weight: 0.191 kg Torx key: T8 Torx screw: M2.5x5.5 Special features Internal coolant supply For APKT 1003 indexable inserts Compatible with Korloy inserts Manufacturer: Teknik Makina FAQ Which inserts are compatible with this cutter? The cutter accepts APKT 1003 indexable inserts and is specified to be compatible with Korloy insert grades; choose the insert geometry and grade appropriate for the workpiece material. Is the coolant supplied directly to the cutting edge? Yes — the tool features internal coolant routing that delivers fluid to the cutting zone, aiding chip control and thermal management during milling. What shank size is required for stable clamping? A 16 mm shank diameter is specified; firm clamping in a suitable 16 mm collet or chuck is recommended to preserve stiffness and accuracy. How long is the cutting section and how does this affect stability? The tool offers a 45 mm cutting length within a 120 mm overall length, which helps limit overhang and reduces the risk of chatter for improved surface finish. What fastener is used for insert clamping? Insert clamping uses a Torx T8 drive with an M2.5x5.5 fastening screw to ensure repeatable and secure insert seating. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20.5mm Solid Carbide End Mill For SPMG 0502-0904 Indexable Inserts, 2 Flutes 50mm Cutting Length, 120mm Overall - Teknik Makina
Take advantage of a precisely engineered shank milling cutter that pairs secure clamping with proven insert compatibility to keep machining cycles consistent and setup times short; order directly via Metav Werkzeuge or consult the team for application-specific advice. Shank milling cutter S826TM – for SPMG 0502-0904 indexable inserts, Ø 20.5 mm, shank Ø 20 mm (Teknik Makina) Shank milling cutter S826TM designed for light to medium milling applications using SPMG indexable inserts, offering a compact tool body and dependable insert retention for repeatable results For SPMG 0502-0904 indexable inserts Effective diameter Ø 20.5 mm Shank Ø 20 mm for secure clamping 50 mm cutting length Consistent machining through rigid design and repeatable geometry The cutter body is engineered to deliver stable cutting performance across prolonged production runs. With an effective diameter of Ø 20.5 mm and a shank Ø 20 mm, the tool provides a balanced combination of rigidity and accessibility for confined setups. The compact overall length of 120 mm reduces overhang and vibration, which in turn improves surface finish and tool life. This design suits small-batch production and jobbing environments where reproducible results and short changeover times are required. Fast changeover and clear insert compatibility save setup time Compatibility with SPMG 0502-0904 indexable inserts simplifies stocking and reuse of established insert grades. The tool accepts inserts in the SPMG family, including variants marketed by Taegutec, which allows the use of commonly available grades for steel and alloy machining. Fastening is standardised with a Torx screw M2.5×7 and a T8 key, enabling quick insert replacement and minimised downtime. The result is a tool that supports efficient workflows and predictable maintenance intervals. Purpose-built for predictable chip control and productivity Configured with 2 cutting edges, the cutter offers a straightforward cutting geometry that promotes stable chip evacuation and lowers cutting forces in interrupted cuts. The defined 50 mm cutting length provides sufficient engagement for many profiling and slotting tasks while limiting unsupported cutter length. This focus on predictable machining behaviour helps maintain consistent cycle times and reduces the risk of unexpected scrap. Practical features for workshop integration The tool’s modest mass of 0.29 kg keeps handling and toolchanger loading simple, while the shank dimensions comply with conventional collet and chuck systems used in small to medium CNC machines. The standardised fastening hardware supports easy procurement and routine maintenance. Where tool selection must align with existing insert inventories, this cutter body offers a seamless option to extend capability without introducing non-standard consumables. Contact Metav Werkzeuge for technical guidance or to request the Teknik Makina S826TM for immediate integration into existing tooling stacks — Tel: +49 2822 7131930 • eMail: info@metav-werkzeuge.com Technical Data SKU: S826TM Manufacturer: Teknik Makina Compatible inserts: SPMG 0502-0904 Indexable Inserts Suitable insert series: SPMG 07T3 Fastening: Torx screw M2.5×7 / Torx key T8 Data Diameter: 20.5 mm Shank diameter: 20 mm Cutting length: 50 mm Overall length: 120 mm Cutting edges: 2 Weight: 0.29 kg Special features For SPMG 0502-0904 indexable inserts Compatible with Taegutec SPMG 07T3 inserts Standard Torx fixing for quick insert changes FAQ What materials is the cutter suitable for? The Shank milling cutter S826TM (Teknik Makina, SKU S826TM) is intended for general light to medium milling tasks; selection of the appropriate SPMG insert grade determines suitability for steel, alloy or other specific materials. Which insert sizes fit this tool? This cutter accepts SPMG 0502-0904 indexable inserts and is compatible with common SPMG 07T3 variants from manufacturers such as Taegutec. How is the insert secured and what tools are needed? Inserts are secured with a Torx screw M2.5×7; a T8 Torx key is required for insert changes and fastening operations. Is the cutter suitable for high-speed machining? The tool body is compact and designed for stable operation; compatibility with high-speed applications depends on the chosen insert grade and machine spindle parameters rather than the cutter body alone. Can the cutter be used in automatic toolchangers? The shank Ø 20 mm and overall mass of 0.29 kg make the cutter suitable for systems that accept shanks of this size and mass; check clamping specifications of the toolholder or changer. Teknik Makina: Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
High-performance shank cutters and ball nose cutters for efficient milling
Insert shank cutters and ball nose cutters combine flexibility and productivity for a wide range of milling tasks. The category covers steel-bodied shank cutters fitted with indexable inserts for economical roughing, face milling, cornering and slotting, as well as ball nose cutters for contouring and 3D finishing.
How these tools work and where they belong
Shank cutters with indexable inserts use a carrier body made from hardened steel; the cutting edges are provided by removable inserts rather than a solid tool blank. Where tools do not have internal coolant, process heat and chips are managed via external coolant nozzles or compressed air, which is sufficient for open, surface-level and easily accessible milling on standard materials. Shank cutters with internal coolant feature fine internal channels that deliver coolant or blasting air directly to each cutting edge under pressure. This targeted supply is essential for deep pockets, cavities, full slotting and machining of heat-resistant or difficult-to-machine materials, because it prevents chip re-cutting, protects cutting edges from thermal overload and enables higher feed rates and improved surface quality.
Cut cycle times and reduce tooling costs
- Replaceable indexable inserts reduce consumable costs and shorten tool change time.
- Targeted internal coolant improves chip evacuation and extends insert life.
- Robust steel carrier bodies enable heavy-duty roughing without frequent tool replacement.
- Suitable for roughing, planing, corner milling and slot milling as well as precision 3D profiling with ball nose cutters.
A practical choice for purchasing and stocking tools
Metav brings a pragmatic purchasing advantage: a broad range of milling solutions is available from a single European quality hub. Metav’s focus on democratising precision means workshops benefit from a wide assortment, consistent quality control from Emmerich and steady supply — supported by decades of expertise and over 48,000 satisfied customers. Choose Metav for a centralised sourcing strategy that reduces supplier complexity while keeping access to both insert milling cutters (also referred to as insert milling cutters or indexable end mills) and ball nose cutters (also known as ball nose end mills or radius cutters) straightforward.
Quick summary
Insert shank cutters and ball nose cutters deliver flexible, cost-effective milling: replaceable inserts lower running costs, and internal coolant options enable higher performance and longer tool life where chip control is critical.
FAQ
When should I choose a shank cutter with indexable inserts rather than a solid carbide end mill?
Choose shank cutters with indexable inserts for economical roughing and high-stock-removal tasks where replacing inserts is preferable to replacing an entire tool; they are especially effective for face milling, cornering and slotting operations.
Does internal coolant make a measurable difference for ball nose cutters?
Yes. Internal coolant directed to each cutting edge reduces chip re-cutting and thermal stress, which improves surface finish and increases insert life when machining deep pockets, cavities or heat-resistant materials.
Can shank cutters without internal coolant be used for general workshop milling?
Absolutely. Tools without internal coolant rely on external coolant nozzles or compressed air and are well suited to open, superficial and easily accessible milling on standard materials.
What milling operations are shank cutters for indexable inserts typically used for?
Shank cutters with indexable inserts excel at economical roughing, planfräsen (face milling), corner milling and slot milling; ball nose cutters are the preferred choice for 3D profiling and finishing operations.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com