Efficient shaft cutters and ball nose cutters for versatile milling
Shaft cutters and ball nose cutters serve as robust rotating tools for roughing, face milling, corner milling and slotting, offering economical replacement of indexable inserts rather than whole solid tools. Available in versions with internal coolant to feed lubricant directly to each cutting edge or without internal coolant relying on external nozzles, these cutters ensure effective chip evacuation and thermal control suited to standard materials or deep pocket and cavity work. By preventing chip re-cutting and protecting cutting edges, they deliver higher feed rates, improved surface finish and extended tool life in demanding metalworking applications.
20mm Shank Cutter for APKT 0903 Indexable Inserts 90° Cutting Angle, 45mm Cutting Length - Teknik Makina
Take advantage of a compact, indexable solution that combines reliable insert compatibility and stable shaft geometry: the cutter’s 20 mm shaft diameter and 45 mm cutting length deliver consistent results in serial production, while straightforward clamping reduces changeover time — order via Metav Werkzeuge or consult our specialists for application advice. Schaftfräser — indexable insert milling cutter with 20 mm diameter for APKT 0903 inserts by Teknik Makina A robust milling cutter for indexable inserts, designed for face milling and shoulder operations where secure insert clamping and predictable chip control are required. 20 mm shaft diameter for stable machining Compatible with APKT 0903 indexable inserts Three cutting edges for smooth material removal Optimised compatibility for indexable inserts and applications This tool is designed specifically for APKT 0903 indexable inserts, ensuring dependable seating and predictable cutting performance when combined with compatible insert grades. The holder accepts inserts from leading manufacturers such as Walter, which permits flexible selection of coating and substrate according to workpiece requirements. By using a purpose-built insert holder rather than solid tooling, spare-part logistics are simplified and tool costs can be controlled through economical insert replacement rather than full-tool exchange. Stable geometry for repeatable cut quality and efficient chip control The cutter’s 20 mm shaft diameter and 45 mm cutting length provide a balance between rigidity and reach: the stiff shaft reduces vibration while the specified cutting length supports a variety of shoulder and face milling tasks. The tool has three cutting edges and a 90° cutting angle, which helps to produce consistent surface finish and dimensional stability on interrupted and continuous cuts. Secure clamping is achieved via an M2.5x7 Torx screw (Torx key T8), enabling quick, repeatable insert changes and minimising downtime during production shifts. Practical integration into machining workflows and maintenance With an overall length of 120 mm and a net weight of 0.278 kg, the holder is compact enough for tight setups yet long enough for standard toolholder systems. The design supports straightforward insert replacement and inspection, limiting machine idle time and facilitating lean operations on the shop floor. For production environments that prioritise predictable throughput and easy inventory management, the S206TM cutter integrates with existing insert stocks and tooling strategies while maintaining the advantages of indexable tooling. Contact Metav Werkzeuge for tailored recommendations on cutting data, insert grades and mounting options for this Teknik Makina indexable cutter — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S206TM Manufacturer: Teknik Makina Designation: Milling cutter for APKT 0903 indexable inserts Numbers / Core technical data Shaft diameter: 20 mm Cutting length: 45 mm Overall length: 120 mm Number of cutting edges: 3 Cutting angle: 90° Weight: 0.278 kg Torx screw: M2.5x7 Torx key: T8 Compatible inserts: APKT 0903 Compatible insert manufacturer: Walter Design / Special features Indexable insert holder for APKT 0903 Three-flute configuration for balanced removal Secure Torx clamping system Compact 120 mm length for versatile mounting FAQ Which insert type is required for this cutter? The cutter accepts APKT 0903 indexable inserts; choosing the correct insert grade for the workpiece material is recommended for optimal wear life. Is the clamping screw a standard size and which key is needed? Clamping is via an M2.5x7 Torx screw; a T8 Torx key is used for secure tightening and repeatable insert changes. Can this holder be used with inserts from other manufacturers? Yes — the design is compatible with standard APKT 0903 geometry; inserts from Walter and other suppliers with the same geometry fit the holder. What are the main benefits of using an indexable holder over a solid cutter? Indexable holders reduce tooling costs through replaceable inserts, shorten changeover times and simplify inventory management compared with full-tool replacement. Which operations suit this tool best? The holder is suitable for face milling and shoulder milling tasks where a 20 mm shaft provides the required rigidity and the three-edge configuration delivers steady material removal. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Shank Cutter for APKT 1003 Indexable Inserts 90° Cutting Angle, 3 Flutes - Teknik Makina
Take advantage of a rigid Ø20 mm shank, 3 cutting edges and a 30 mm cutting length for consistent milling performance; the compact 100 mm overall length keeps setups precise. Order the S032TM directly via Metav Werkzeuge or ask our consultants if needed. S032TM indexable milling cutter — for APKT 1003-1604 indexable inserts, Ø20 mm shank (Teknik Makina) S032TM is an indexable milling cutter designed to accept APKT 1003–1604 inserts and to deliver stable material removal in CNC and production milling applications Ø20 mm shank diameter for standard toolholders Compatible with APKT 1003 indexable inserts 3 cutting edges for balanced material removal 30 mm effective cutting length for deeper passes Torx screw M2.5x5.5; T8 key for secure clamping Enhanced rigidity for repeatable production results The solid Ø20 mm shank and compact 100 mm overall length reduce deflection during high-speed milling, which results in more predictable toolpaths and consistent part quality. With 3 cutting edges, the tool body balances chip load across the circumference, lowering vibration and promoting even wear across inserts. The geometry — a 90° cutting angle — supports perpendicular face milling and stable engagement, so cycle times can be kept tight without sacrificing finish quality. These mechanical properties translate directly into measurable production benefits: improved surface consistency and fewer reworks. Fast insert changes and secure clamping to cut downtime Insert retention is handled by a Torx system ( M2.5x5.5 screw) operated with a T8 key, enabling repeatable clamp torque and quick insert swaps on the shop floor. The cutter accepts APKT 1003 indexable inserts and is compatible with inserts from YG-1, allowing use of common insert grades and geometries for different materials. Indexable inserts mean only the cutting insert is replaced when worn, not the whole tool body, supporting cost-effective tooling management and straightforward maintenance procedures in busy production environments. Practical fit for workshop and industrial milling tasks This indexable cutter is specified for applications where a moderate depth of cut and reliable toolholding are priorities: the 30 mm cutting length provides ample engagement for pocketing, face milling or slotting passes within its diameter range. The compact mass (approx. 0.342 kg) simplifies handling and reduces spindle load during tool changes. As a component in a coordinated tooling strategy, the body complements standard toolholders and is suited to machine shops and production lines seeking dependable repeatability with indexable insert systems. For buyers prioritising procurement certainty, Metav’s European distribution ensures a practical supply route and technical consultation where required. For technical advice or to arrange supply of the Teknik Makina S032TM from Metav Werkzeuge — including availability and interchange options for APKT 1003 inserts — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for prompt, workshop-focused support. Technical data SKU: S032TM Manufacturer: Teknik Makina Product: Indexable milling cutter for APKT 1003-1604 indexable inserts Shank diameter: 20 mm Cutting length (shank): 30 mm Number of cutting edges: 3 Cutting angle: 90° Overall length: 100 mm Diameter: 20 mm Weight: 0.342 kg Compatible inserts: APKT 1003 Compatible insert manufacturer: YG-1 Torx screw: M2.5x5.5 Torx key: T8 FAQ Which inserts fit this cutter? The cutter accepts APKT 1003 indexable inserts; compatible insert grades from YG-1 are commonly used with this body. What is the shank diameter and overall length? Shank diameter is 20 mm and overall length is 100 mm, suited to standard toolholders for compact setups. How many cutting edges does the tool body provide? The body is built for 3 cutting edges, which helps balance chip load and reduce vibration during milling. What fixing hardware is used for insert clamping? Insert clamping uses a M2.5x5.5 Torx screw tightened with a T8 key to ensure repeatable clamp torque. For which machining tasks is this cutter intended? The design is aimed at milling operations utilising APKT 1003 inserts where a 30 mm cutting length and stable perpendicular engagement (90°) are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Shank Cutter For APXT 1003 Indexable Inserts, 3 Flutes 70mm Cutting Length, 90° Cut - Teknik Makina
Take advantage of reliable clamping and proven insert compatibility to maintain steady chip evacuation and cycle times; the 20 mm shank and 70 mm cutting length provide rigidity and reach for medium-depth milling. Order via Metav Werkzeuge or consult their specialists if further process optimisation is required. Shank milling cutter S186TM – for APXT 1003 indexable inserts, Ø20 mm (Teknik Makina) The Shank milling cutter S186TM is a robust shank tool engineered for machining operations with APXT 1003 indexable inserts, offering stable clamping and consistent chip control for CNC and manual milling stations Ø20 mm shank for stable clamping 70 mm cutting length for deep passes Compatible with APXT 1003 indexable inserts Torx screw M2.5x5.5 and T8 key included Stable removal rates and dimensional consistency for production The S186TM combines a Ø20 mm shank with a 70 mm cutting length to deliver a balance of rigidity and reach that supports repeatable material removal. With three cutting edges, the tool reduces vibration when subjected to moderate radial loads, improving surface finish and extending insert life. The specified geometry supports predictable tool life, which in turn lowers setup frequency and contributes to steady cycle times on serial workpieces. Fast insert changes and secure clamping to reduce downtime Tool changeover is simplified by a practical fastening system: the cutter uses a Torx screw M2.5x5.5 secured with the supplied T8 key, enabling quick, repeatable insert seating without additional fixtures. This configuration permits secure indexable insert clamping while allowing operators to perform service tasks at the machine, cutting internal handling times and keeping production flow uninterrupted. Versatile compatibility and material handling for mixed workloads Designed for APXT 1003 indexable inserts and tested for compatibility with Korloy grades, the cutter supports a variety of insert grades and chipbreaker types. This flexibility makes the tool suitable for aluminium, non-ferrous alloys and many steels when appropriate inserts are selected. The combination of indexable inserts and the shank tool approach provides economical edge changes versus solid-carbide alternatives, helping to manage tooling budgets without compromising performance. Integration into CNC toolsets and handling considerations With an overall length of 200 mm and a balanced mass of 0.5 kg, the shank cutter fits most standard toolholders while minimising centrifugal imbalance at moderate spindle speeds. The 90° face geometry delivers conventional shoulder milling behaviour, aiding in perpendicular wall generation and accurate step features. Where fixture rigidity and spindle power are adequate, the cutter supports efficient shoulder passes and pocketing with predictable forces and consistent surface results. Discuss specific machining scenarios with Metav Werkzeuge to align the S186TM with the right APXT 1003 insert grade and machining parameters for optimal throughput Technical data SKU: S186TM Manufacturer: Teknik Makina Article name: Shank milling cutter for APXT 1003 indexable inserts Dimensions & measurable data Shaft diameter: 20 mm Cutting length: 70 mm Overall length: 200 mm Diameter: 20 mm Cutting edges: 3 Weight: 0.5 kg Cutting angle: 90° Compatibility & fittings For APXT 1003 indexable inserts Compatible with Korloy inserts Torx screw: M2.5x5.5 Torx key: T8 ECLASS: 21180806 ETIM: EC011860 FAQ What insert type does this cutter accept? The cutter accepts APXT 1003 indexable inserts; insert geometry selection should match the intended material and surface finish requirements. Is a torque tool supplied for the fastening screw? A T8 key is supplied and the shank cutter uses a Torx screw M2.5x5.5 for insert clamping. What shank diameter and cutting length are available? The tool features a 20 mm shank diameter and a 70 mm cutting length, suitable for medium-depth milling operations. Can the tool be used with Korloy inserts? Yes, compatibility with Korloy insert grades is stated; confirm the chosen grade matches the machining task. What is the overall length and weight of the tool? Overall length is 200 mm and weight is approximately 0.5 kg, enabling straightforward toolholder integration. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Shank Cutter for AXMT 0602 and APKT 0903 Indexable Inserts, 3 Flutes 45mm Cutting Length - Teknik Makina
Take advantage of a compact, high‑stability milling holder that combines reliable clamp security and proven insert compatibility for efficient production. Benefit from the 20 mm shank and 45 mm cutting length to maintain process stability and reduce changeover time; order directly via Metav Werkzeuge or consult the technical team for integration advice. Shaft cutter S016TM — indexable‑insert milling holder with 20 mm shank and 3 flutes (Teknik Makina) The Shaft cutter S016TM is an indexable‑insert milling holder designed for machining tasks that require stable clamping and quick insert changes; suitable for holders using AXMT 0602 and APKT 0903 inserts. 20 mm shank diameter for stable clamping 45 mm cutting length for deeper cuts Compatible with APKT 0903 and AXMT 0602 inserts Torx M2.5 fixing screw, T8 key required Reliable stability for repeatable machining results The milling holder delivers consistent rigidity thanks to its 20 mm shank and robust construction, which together reduce vibration and improve surface finish. Rigidity is a decisive factor when aiming for repeatable tolerances on batch workpieces; using a larger shank diameter improves load distribution in the toolholder and stabilises the cutting process. The measured weight of 0.296 kg contributes to a balanced assembly, while an overall length of 120 mm allows comfortable reach into typical clamping setups without compromising control. Fast insert changes and broad tooling compatibility Designed for indexable inserts such as APKT 0903 and AXMT 0602, the holder ensures rapid tool replacement and minimal downtime. The clamping is secured by a Torx M2.5 screw—engaged with a T8 key—so insert exchange is straightforward and repeatable. Clear compatibility with recognised insert standards simplifies procurement and tool planning, enabling efficient inventory management and the option to use inserts from multiple suppliers where appropriate. Productivity through focused cutting geometry Equipped with 3 flutes, the cutter holder suits operations where chip evacuation and balanced cutting action are priorities. The specified 45 mm cutting length permits deeper axial engagement while retaining cutter stability for slotting and face milling operations. For production environments requiring predictable tool life and consistent cycle times, the combination of the holder geometry and compatible indexable inserts supports higher feed rates and steady metal removal rates, contributing to improved throughput. Practical handling, assembly and maintenance The holder is supplied with defined fastening specifications to ensure safe mounting and servicing: the fixing screw dimension and torque key specification facilitate correct assembly and controlled clamping force. Clear labelling of the shank and cutting lengths simplifies selection for programming and setup. Routine checks of the Torx fixing and periodic inspection of insert seatings are recommended to maintain performance; simple maintenance keeps the holder ready for continuous use and reduces unplanned downtime. Contact Metav Werkzeuge for availability and tailored advice on Teknik Cutting Tools shaft cutters — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: S016TM Manufacturer: Teknik Makina Product: Shaft cutter for AXMT 0602 and APKT 0903 Indexable Inserts Facts Shank diameter: 20 mm Cutting length (shank): 45 mm Number of cutting edges: 3 Overall length: 120 mm Weight: 0.296 kg Diameter: 20 Special features Compatible with APKT 0903 Also for AXMT 0602 indexable inserts Torx screw: M2.5x5.5 Torx key size: T8 Suitable insert manufacturer: Taegutec FAQ Which insert types fit this holder? The holder accepts APKT 0903 and AXMT 0602 indexable inserts; the product is specified for these geometries to ensure correct seating and optimal cutting performance. What is the shank diameter and why does it matter? A 20 mm shank diameter is provided; a larger shank improves rigidity and helps maintain machining accuracy under load for repeatable results. How deep can the cutter engage axially? The cutter offers a 45 mm cutting length, which permits deeper axial engagement for slotting and face milling within the limits of machine and clamping setup. Which screw and key are required for insert clamping? Insert clamping uses a Torx M2.5x5.5 screw and requires a T8 key for proper fastening and repeatable seating. Is the holder suitable for high‑feed operations? With 3 flutes and a stable shank, the holder supports productive feeds where chip evacuation and balanced cutting are required; final parameters depend on insert grade and workpiece material. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Shank Cutter For LNMX 0603 Indexable Inserts, 3 Flutes, 130mm Overall Length - Teknik Makina
Benefit from the combination of a 20 mm shank and a 130 mm overall length together with compatibility for LNMX 0603 indexable inserts; order directly via Metav Werkzeuge or consult our experts for guidance. S285TM — Shank milling cutter for LNMX 0603 indexable inserts (20 mm shank, 130 mm overall length) The S285TM is a robust shank milling cutter intended for industrial milling operations using LNMX 0603 indexable inserts, designed to deliver consistent chip control and reliable toolholding in production environments. 20 mm shank for secure toolholding Compatible with LNMX 0603 indexable inserts Three cutting edges for efficient material removal Torx M3x7 retention screw; T8 key Stable toolholding for repeatable accuracy A rigid toolholder begins with a stable interface. The 20 mm shank and matched tool taper provide a firm connection between spindle and cutter, reducing chatter and improving surface finish. With an overall length of 130 mm, the assembly balances reach with rigidity, lowering the risk of deflection during interrupted cuts. For workshops aiming to maintain tight tolerances, the emphasis on stable clamping reduces rework and keeps cycle times predictable. Efficient cutting courtesy of LNMX 0603 indexable inserts Designed for use with LNMX 0603 indexable inserts from Korloy, the cutter accepts small, easily rotated inserts that restore cutting performance without replacing the whole tool body. The cutter’s three cutting edges provide a good compromise between chip evacuation and feed stability, enabling steady material removal rates while extending the interval between indexings. For production runs where tool-change speed and predictable output matter, this design supports consistent throughput. Practical retention and quick insert handling Retention is handled by a Torx fastening system that uses a M3x7 retention screw and a T8 key, ensuring a secure seat for each insert. The straightforward fastening geometry simplifies service procedures at the machine, shortening downtime when inserts are changed. Clear mechanical engagement and proven fastener sizes keep maintenance predictable and allow trained technicians to perform safe, repeatable insert replacements. Workshop fit and operational advantages Manufactured by Teknik Makina, the tool is engineered for integration into standard milling setups that accept a 20 mm shank interface. The combination of a compact cutter body and indexable inserts supports flexible tooling strategies: keep a small inventory of tool bodies while stocking a range of inserts for different materials and operations. This approach reduces storage complexity and helps maintain production readiness across diverse machining tasks. Discuss integration of the Teknik Makina S285TM with Metav Werkzeuge — contact the Emmerich team for a tailored tooling recommendation or technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: S285TM Name: Shank milling cutter (translated) Manufacturer: Teknik Makina Article type: Shank milling cutter for indexable inserts ECLASS: 21180806 ETIM: EC011860 Numbers / Core technical data Shank diameter: 20 mm Cutting diameter: 20 mm Overall length: 130 mm Number of cutting edges: 3 Designs / Special features Compatible with LNMX 0603 indexable inserts Suited to Korloy LNMX 0603 inserts Retention screw: M3x7 Required key: T8 Manufacturer SKU / ID: S285TM FAQ Which inserts are compatible with this cutter? The cutter is compatible with LNMX 0603 indexable inserts; it is specified to accept Korloy LNMX 0603 types. What is the shank diameter and overall length? Shank diameter is 20 mm and overall length is 130 mm for the S285TM shank milling cutter. How many cutting edges does the tool have? The tool body is specified with three cutting edges to balance feed stability and chip control. Which retention screw and key are required? Retention uses an M3x7 Torx screw and the corresponding T8 key for secure insert clamping. Who manufactures this tool? This tool is manufactured by Teknik Makina and supplied under the SKU S285TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Shank Cutter for XEKT 1904 Indexable Inserts L130mm Internal Coolant - Teknik Makina
Benefit from the tool's 20 mm shank, integrated internal coolant and compatibility with XEKT 1904 indexable inserts to reduce downtime and maintain consistent milling quality. Order the tool directly via Metav Werkzeuge or contact their specialists for tailored application advice. 20 mm Shank Milling Cutter S383TM — indexable cutter for XEKT 1904 inserts with internal coolant (Teknik Makina) A 20 mm Shank Milling Cutter S383TM engineered for reliable indexable-insert milling with through-tool coolant for improved process stability. 20 mm shank for stable toolholding Internal coolant for improved chip evacuation Compatible with Korloy XEKT 1904 inserts Stable connection for consistent surface quality Engineered to provide a rigid interface with CNC toolholders, the 20 mm shank delivers lower run-out and reduced vibration, which directly improves finish and repeatability. With an overall length of 130 mm, the tool balances reach and stiffness to suit many machining set-ups. Compatibility with XEKT 1904 indexable inserts from Korloy simplifies stocking and replacement, enabling predictable cutting performance across batches. Coolant delivered where it matters to extend tool life The integrated internal coolant channels cutting fluid directly to the engagement zone, lowering temperatures and improving chip control during high-duty cycles. This feature helps maintain insert edge integrity and reduces the frequency of regrinds or replacements, supporting longer uninterrupted production runs. Secure clamping via a Torx T15 screw (M4x8.5) ensures repeatable positioning after insert changes. Fast insert changes and compact handling Designed for a single-insert head, the cutter keeps service times short and spare-part complexity low. The 61 mm cutting length provides sufficient engagement for a wide range of milling tasks while the modest mass (0.251 kg) makes handling and set-up straightforward on the shop floor. The straightforward clamp design supports efficient turnover during batch or toolpath changes. Practical productivity gains in everyday machining Suited to workshops and production cells that rely on indexable tooling, this shank cutter enables efficient material removal for roughing and light finishing when paired with the appropriate insert grades. The tool’s balance of rigidity and reach cuts set-up time and contributes to higher machine uptime. Standardised Torx fixation and Korloy compatibility allow smooth integration into established tooling systems, so the focus remains on output rather than fitment. For reliable indexable milling with through-tool coolant, contact Metav Werkzeuge for technical advice and availability of the Teknik Makina S383TM—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S383TM Product type: Shank milling cutter Brand: Teknik Makina Compatible inserts: XEKT 1904 (Korloy) Facts Diameter: 20 mm Shank diameter: 20 mm Overall length: 130 mm Cutting length: 61 mm Weight: 0.251 kg Number of cutting edges: 1 Special features Internal coolant: yes Clamping screw: M4x8.5 Torx key: T15 Suitable for Korloy inserts FAQ Which indexable inserts are compatible with this cutter? The 20 mm Shank Milling Cutter S383TM is designed for XEKT 1904 indexable inserts and is compatible with the Korloy XEKT 1904 series. Does the tool provide through-tool coolant? Yes, the cutter features internal coolant to supply fluid directly to the cutting zone and improve chip evacuation. What clamping hardware is used for the insert? Clamping is secured with an M4x8.5 screw tightened via a Torx T15 key for consistent retention of the insert. How long is the cutting length and what is the overall length? The tool has a cutting length of 61 mm and an overall length of 130 mm, offering a balance of reach and stiffness for general milling tasks. Is this cutter suitable for quick retooling in batch production? The single-insert configuration and Torx clamping enable rapid insert replacement and straightforward handling, supporting efficient retooling between batches. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Shank Cutter For XOMX 0602-1204 Indexable Inserts, 90° Cutting Angle - Teknik Makina
Take advantage of a robust indexable-insert system that combines compatibility with SECO inserts, a compact 20 mm shank and a 60 mm cutting length to keep cycle times low and tooling costs predictable — order through Metav Werkzeuge or request advice from our technical team. Shank milling cutter S641TM – holder for XOMX 0602-1204 indexable inserts, 20 mm shank The Shank milling cutter S641TM is a precision toolholder designed for indexable-insert milling in CNC and manual operations, suitable for shoulder and face milling with XOMX 1204 inserts. Compatible with SECO indexable inserts 20 mm shank diameter for standard toolholders 60 mm cutting length for deep milling Two cutting edges, 90° shoulder angle Faster machining with proven indexable-insert economy The holder is engineered to make the most of indexable inserts, reducing downtime for resharpening and lowering cost per part. With a 60 mm cutting length and a compact design, the toolholder enables longer cuts without frequent changeovers, which improves throughput on repetitive operations. The economic advantage is clear: replace only the insert rather than the entire cutter, while maintaining consistent precision across batches. Compatibility with established insert systems keeps tooling procurement straightforward and helps standardise production. Simple fit-up and maintenance for steady production A 20 mm shank matches common toolholder interfaces, delivering secure clamping and repeatable concentricity in milling spindles and adaptors. The insert is secured with a Torx screw M3.5x8.5, tightened with a T10 key, allowing quick changeovers and reliable clamping torque. This straightforward maintenance reduces operator time spent on tool swaps and limits process variation. The toolholder’s balanced geometry and modest weight (0.504 kg) support stable cutting conditions, contributing to consistent surface quality and longer insert life. Practical advantages on the workshop floor The toolholder’s 90° cutting angle and two cutting edges are optimised for robust shoulder milling and contouring where square faces and sharp steps are required. Use of XOMX 1204 indexable inserts provides a versatile cutting edge for a range of materials when matched to the appropriate insert grade. For procurement and process planning, the compact overall length (200 mm) and the defined shank and cutting lengths simplify fixture clearance checks and toolpath programming. Combined with Metav’s quality control and supply reliability, this holder supports predictable production cycles and repeatable results. For tailored technical matching or to source Teknik Cutting Tools components via Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 for direct assistance and fast delivery Technical Data Article number: S641TM Manufacturer: Teknik Makina Designation: Shank milling cutter for XOMX 0602-1204 Indexable Inserts Compatible inserts manufacturer: SECO Facts Shank diameter: 20 mm Cutting length: 60 mm Total length: 200 mm Number of cutting edges: 2 Cutting angle: 90° Weight: 0.504 kg Special features Torx screw M3.5x8.5 Torx key T10 For XOMX 1204 inserts Suitable for indexable-insert milling applications FAQ Which inserts are compatible with this holder? The holder accepts XOMX 1204 indexable inserts and is specified for XOMX 0602-1204 insert types; compatibility with SECO-standard inserts is stated for the Teknik Cutting Tools shank milling cutter S641TM. How is the insert fastened? An M3.5x8.5 Torx screw secures the insert; use a T10 Torx key to tighten or release the screw when changing inserts on the S641TM. What applications suit this cutter holder? The 90° cutting angle and two cutting edges make the holder well suited to shoulder milling, face milling and operations requiring square shoulders in CNC and manual milling centres. Does the shank fit standard toolholders? The 20 mm shank diameter is compatible with standard 20 mm toolholder interfaces and adaptors commonly used in milling setups for stable clamping. What should be considered when programming for this tool? Account for the total length of 200 mm and the 60 mm cutting length when setting tool offsets and collision clearances; the defined geometry simplifies pathing and fixture checks for the S641TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Shank End Mill for BLMP 0603 Indexable Inserts 40mm Cutting Length, Internal Coolant - Teknik Makina
Taking advantage of an internal coolant supply, a 20 mm shank and three cutting edges delivers stable, efficient milling with predictable tool life; order the milling cutter directly via Metav Werkzeuge or consult our specialists for application-specific advice. Schaftfräser for BLMP 0603 Indexable Inserts — 20 mm shank, internal coolant (Teknik Makina) A Schaftfräser designed as an insert-holder milling cutter for BLMP 0603 indexable inserts, suited for precision face and slot milling on CNC machines. 20 mm shank diameter Internal coolant supply Fits BLMP 0603 indexable inserts Three cutting edges for stable cuts Reliable stability for precision milling The holder is engineered around a 20 mm shank and a total length of 150 mm, providing a compact tool geometry that minimises vibration and runout in demanding operations. The three-flute configuration delivers a balance between material removal rate and stability: fewer flutes reduce cutting forces and enable better chip evacuation, while the trio of cutting edges ensures consistent surface finish and dimensional repeatability. The relatively low mass (approximately 0.335 kg) contributes to reduced spindle load and improved concentricity, which in turn supports tighter tolerance work on production parts. Controlled coolant routing reduces heat and extends insert life Integrated internal coolant channels deliver cutting fluid directly to the insert seat, improving cooling at the primary cutting zone and flushing chips away from the insert pocket. This targeted coolant supply lowers thermal load on the insert and reduces built-up edge, which helps to prolong indexable insert life and maintain consistent cycle times. The holder is compatible with BLMP 0603 style inserts from Taegutec, facilitating quick insert changes and predictable performance across a range of ferrous and non-ferrous milling tasks commonly found in job shops and production cells. Service-friendly fastening and compact design for efficient workflows Maintenance and insert replacement are simplified by the Torx T8 drive and the specified M3x6.2 screw, allowing fast, repeatable clamping with standard workshop tools. The design features a 40 mm cutting-length section for effective engagement in slotting and face milling while keeping the tool overhang moderate for enhanced rigidity. The combination of a compact profile, straightforward screw access and standardised insert compatibility supports quick set-ups and reduces machine downtime, making the tool a practical choice for high-mix, low-to-medium-volume production runs. For reliable high-performance milling with Teknik Makina tooling, request this insert-holder from Metav Werkzeuge — Metav’s technical team in Emmerich can advise on the right BLMP 0603 inserts and supply options to suit production needs. Technical data Article number: S481-1TM Eclass: 21180806 Label: 20mm Schaftfräser BLMP 0603 L150mm mit Innenkühlung Manufacturer: Teknik Makina Facts Diameter: 20 mm Overall length: 150 mm Weight: 0.335 kg Shank diameter: 20 mm Cutting length (shank): 40 mm Cutting edges: 3 Special features Internal coolant: yes Compatible inserts: BLMP 0603 Compatible insert manufacturer: Taegutec Torx key: T8 Torx screw: M3x6.2 SKU: S481-1TM FAQ What inserts fit this holder? The holder accepts BLMP 0603 indexable inserts; compatibility is confirmed with inserts from Taegutec and the tool is supplied under SKU S481-1TM. Is coolant-through capability included? Yes — the holder features internal coolant channels to direct fluid to the insert seat and the primary cutting zone. What are the key dimensions for tool set-up? Key dimensions: 20 mm shank diameter, 150 mm overall length and a 40 mm cutting-length section; these values support compact set-ups and moderate overhangs. How is the insert secured and serviced? Inserts are secured with a Torx drive (T8) and an M3x6.2 screw for quick, repeatable replacement and straightforward maintenance. Which manufacturer produced this tool? The tool is supplied by Teknik Makina; full identification appears with SKU S481-1TM for ordering and inventory. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Shank End Mill For ENMX 0604 Indexable Inserts, 3 Cutting Edges, 160mm Length - Teknik Makina
Benefit from a robust combination of a 20 mm shank, compatibility with ENMX 0604 indexable inserts and three cutting edges for steady material removal and repeatable set-up. Order direct via Metav Werkzeuge or consult our specialists for integration into existing toolholders. Shank cutter S109TM — for ENMX 0604 indexable inserts, 20 mm shank, 3 cutting edges (Teknik Makina) The Shank cutter S109TM is a compact shank milling tool designed to accept ENMX 0604 indexable inserts and to serve precision milling tasks on CNC machines and workshop spindles. Compatible with ENMX 0604 indexable inserts 20 mm shank for secure clamping Three cutting edges for stable material removal Torx M2.5x7 screw with T8 key for straightforward maintenance Precise compatibility speeds set-up and repeatability The tool is built for reliable interfacing with ENMX 0604 indexable inserts, a standard insert format that simplifies stocking and replacement. With a 20 mm shank and an overall length of 160 mm, the cutter provides a familiar form factor for many toolholders and collets, enabling quick changeovers and repeatable clamping. The combination of standard insert geometry and a consistent shank diameter helps to reduce set-up time and to keep machining tolerances stable across batches. Stable cutting action and reduced process interruptions Equipped with three cutting edges, the cutter balances cutting forces to deliver steady chip evacuation and smoother feeds compared with more asymmetric designs. The tool secures its inserts with a M2.5x7 Torx screw, serviced with a T8 key, which streamlines insert changes and reduces downtime. This design focus on mechanical simplicity yields an efficient tool life cycle: fewer surprises during production, easier maintenance routines and predictable performance during longer runs. Integration into workshop workflows with recognised supply reliability As a branded component from Teknik Makina, this shank milling tool fits into professional workflows where standardisation and availability matter. Compatibility with inserts from YG-1 supports interchangeability in specialist tooling stores and reduces logistics complexity. The compact dimensions and industry-standard fixing method make the cutter suitable for small-batch precision work as well as series production where tool change speed and consistent results are priorities. For technical clarification or to discuss suitability for specific machines, contact Metav Werkzeuge to arrange a tailored recommendation or ordering plan — Metav Werkzeuge will advise on toolholder matching and delivery from Emmerich. Technical data Article number: S109TM Name: Shank cutter / Schaftfräser Designation: for ENMX 0604 Indexable Inserts Manufacturer: Teknik Makina Facts Diameter: 20 mm Overall length: 160 mm Shank diameter (clamping): 20 mm Number of cutting edges: 3 Torx screw: M2,5x7 Torx key: T8 Compatible insert family: ENMX 0604 Special features Compatible insert manufacturer: YG-1 Indexable insert retention by Torx screw Suitable for standard 20 mm toolholders FAQ What insert type does the cutter use? The cutter accepts ENMX 0604 indexable inserts; the retention system uses a M2.5x7 Torx screw as supplied with the S109TM. What is the shank size and overall length? The S109TM features a 20 mm shank and an overall length of 160 mm, making it compatible with common 20 mm collets and holders. How many cutting edges does the tool have and what is the benefit? The shank milling tool has three cutting edges, which balance cutting forces for stable removal and improved surface consistency in many milling operations. Is the cutter compatible with inserts from other manufacturers? The tool is specified for ENMX 0604 inserts and is compatible with inserts from YG-1, ensuring interchangeability with that supplier's geometry. Which screw and key are required for insert changes? Insert clamping is achieved with a M2.5x7 Torx screw and the corresponding T8 key, enabling quick and secure insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Shank End Mill for LNMX 1006 Indexable Inserts Internal Coolant, 25mm Cutting Length - Teknik Makina
Take advantage of stable clamping and internal coolant for consistent cycle times, plus compatibility with LNMX 1006 indexable inserts for rapid insert changes; order the tool directly via Metav Werkzeuge or ask the technical consultants for application advice. Shank cutter for LNMX 1006 indexable inserts by Teknik Makina — 20 mm shank, internal coolant Shank cutter for use in heavy-duty indexable milling applications, designed to accept LNMX 1006 indexable inserts and to maintain performance under continuous production conditions Internal coolant for improved chip evacuation 20 mm shank for stable clamping Compatible with LNMX 1006 indexable inserts 25 mm cutting length for precise engagement Consistent machining performance and reduced set-up time The 20 mm shank and substantial overall length deliver a rigid connection to the spindle, which stabilises cutting forces and reduces vibration-driven rejects. With a 120 mm overall length and a 25 mm cutting length, the tool is optimised for typical profiling and shoulder operations where repeatability matters. The presence of internal coolant supports consistent cutting temperatures and efficient chip evacuation, which in turn helps to extend insert life and reduce unscheduled tool changes. These technical characteristics focus on throughput and predictable cycle times, making the cutter a pragmatic choice for production work where process stability is critical. Rapid insert changes, clear fastening and service-friendly design Compatibility with LNMX 1006 indexable inserts — from manufacturers such as Korloy — allows familiar insert geometries and grades to be used without altering machine set-ups. The cutter uses an M3x7 securing screw tightened with a Torx T8, a standardised fixing that simplifies routine maintenance and minimises downtime during insert replacement. By employing replaceable cutting edges rather than solid carbide tips, the system reduces consumable costs per cutting edge and streamlines workshop logistics. The design emphasises straightforward serviceability while retaining industrial robustness. Built for the workshop and the production line Produced by Teknik Makina, this shank cutter combines a measured mass with practical handling: at 0.292 kg it is light enough for fast tool changes yet engineered to retain stiffness where it matters. The tool’s two cutting edges provide a balance between material removal rate and surface finish consistency for many indexable milling tasks. Supplied under SKU LN099-1TM, the cutter is intended for users who require reliable, indexable tooling that integrates with standard insert ranges and conventional fastening systems. For machining cells where internal coolant lines are available, this cutter supports sustained operation with fewer interruptions. For reliable indexable milling with internal coolant, request a technical quote or application consultation from Metav Werkzeuge — contact +49 2822 7131930 or info@metav-werkzeuge.com and reference the Teknik Makina shank cutter (SKU LN099-1TM) Technical Data SKU: LN099-1TM Manufacturer: Teknik Makina Product type: Shank cutter Label: 20mm shank cutter LNMX 1006 L120mm with internal coolant Core specifications Diameter: 20 mm Overall length: 120 mm Shank diameter: 20 mm Cutting length: 25 mm Cutting edges: 2 Weight: 0.292 kg Design & special features Internal coolant: yes Compatible inserts: LNMX 1006 Compatible insert manufacturer: Korloy Securing screw: M3x7 Torx key size (for tightening): T8 FAQ Can this cutter be used with Korloy LNMX 1006 inserts? Yes. The Teknik Makina shank cutter is compatible with LNMX 1006 indexable inserts and is routinely used with Korloy grades for a range of machining tasks. What fixing system secures the inserts on the tool? The inserts are secured with an M3x7 screw requiring a Torx T8 for tightening; the fastening method is standard for this insert format. Does the tool supply internal coolant to the inserts? Yes. The cutter features internal coolant to support chip evacuation and temperature control at the cutting zone. What are the shank and overall dimensions? The tool has a 20 mm diameter shank and a 120 mm overall length, with a 25 mm effective cutting length. Which SKU should be referenced for ordering or specification checks? Reference SKU LN099-1TM for ordering, spare-part queries or tool management records. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Shank End Mill for P32 Indexable Inserts, 56mm Cutting Length - Teknik Makina
Take advantage of the combination of reliable insert compatibility, compact 20 mm shank design and a 56 mm cutting length for efficient, repeatable milling. Order directly via Metav Werkzeuge or contact their consultants for tailored advice and assured supply. Shank milling cutter S378TM by Teknik Makina — for P32 indexable inserts, 20 mm diameter The S378TM is a shank milling cutter designed for machining with P32 indexable inserts, suited to light and medium-duty milling in standard toolholders. Precision 20 mm shank diameter 56 mm cutting length for deep operations Designed for P32 indexable inserts Torx M5 screw, T20 key interface Faster, more economical machining with insert technology The use of indexable inserts reduces downtime and tooling costs by allowing rapid insert changes instead of full-tool replacements. With a compact 20 mm shank and a 56 mm cutting length, this cutter offers a balance between accessibility and reach, enabling efficient side and face milling on small to medium components. The insert system suits standard insert sizes such as P32, which simplifies stock management and speeds up production runs while maintaining consistent cutting geometry. Secure mounting and straightforward integration into existing setups The clamp is secured with a Torx M5 screw requiring a T20 key, providing reliable insert retention and reproducible clamping torque for predictable results. The shank diameter and overall dimensions make the tool compatible with common collets and holders, and its design aligns with established insert manufacturers like Walter, ensuring straightforward integration into current tool inventories. This reduces setup complexity and supports fast tool changes on the shop floor. Predictable results and less inventory complexity By using an indexable-insert cutter rather than solid-carbide variants, maintenance becomes a matter of replacing inserts when worn rather than the entire tool, which lowers ongoing costs and simplifies stockkeeping. The cutter’s specifications — including a 20 mm diameter and a total length of 200 mm — aid in planning toolpaths and fixture design, contributing to stable machining and consistent surface quality. Metav’s selection process and supply chain support mean reliable availability for production continuity. For dependable performance with Teknik Cutting Tools’ S378TM, contact Metav Werkzeuge in Emmerich for personalised procurement advice and guaranteed supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: S378TM Manufacturer: Teknik Makina Product: Shank milling cutter for P32 indexable inserts Compatible with: Walter inserts Core data Shank diameter: 20 mm Cutting length: 56 mm Diameter: 20 mm Overall length: 200 mm Weight: 0.505 kg Torx screw: M5 Torx key size: T20 Features For P32 indexable inserts (P32 20) Torx clamp screw interface SKU S378TM FAQ Which insert type fits this cutter? The cutter is designed for P32 indexable inserts and accepts inserts specified as P32 20. What is the shank diameter and overall length? Shank diameter is 20 mm and the total length is 200 mm for the S378TM. How is the insert secured? Inserts are clamped with a Torx M5 screw; a T20 key is used to apply the correct torque. Is the cutter compatible with inserts from other manufacturers? The S378TM is compatible with standard P32 geometry and is listed as fitting Walter inserts; interchangeability depends on matching insert form and size. What advantages does an indexable-insert cutter provide? Indexable inserts allow rapid replacement, reduced downtime, and lower tooling inventory compared with solid tools, improving cost-efficiency for repetitive production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Shank Face Mill For APKT 0903 Indexable Inserts, 3 Cutting Edges, 60mm Cutting Length - Teknik Makina
Take advantage of precise tool geometry and secure clamping for dependable milling results; the combination of a 20 mm shank and a 60 mm cutting length provides a stable cutting stance with long reach. Order the S218TM shaft cutter directly via Metav Werkzeuge or consult the team for application advice. S218TM shaft cutter — 20 mm shank, for APKT 0903 indexable inserts (Teknik Makina) The S218TM is a robust shaft cutter designed for use with APKT 0903 indexable inserts, intended for general face and shoulder milling in industrial and workshop environments. 20 mm shank diameter 60 mm cutting length 3 cutting edges Compatible with APKT 0903 inserts by Walter Consistent metal removal through proven insert geometry The tool relies on proven insert seating for predictable chip formation and repeatable results. With a 90° cutting angle and 3 cutting edges, the design optimises material removal per pass while maintaining surface integrity. This geometry reduces the need for frequent rework and supports reliable batch processing — an important advantage where cycle times and part quality must be controlled. Stable clamping and extended reach for versatile setups A 20 mm shank combined with a 200 mm overall length delivers reach without compromising stiffness. The 60 mm cutting length gives the necessary overlap for shoulder and face milling tasks, while the secure fixation using a M2.5x7 Torx screw tightened with a T8 key ensures the insert seat remains stable under load. The result is reduced vibration, longer insert life and fewer interruptions for re-tightening. Quick insert changes and broad compatibility to reduce downtime Designed specifically for APKT 0903 indexable inserts and compatible with Walter-manufactured inserts, the cutter simplifies logistics and tooling management. Indexable inserts allow rapid replacement of the cutting edge without regrinding, which shortens maintenance intervals and keeps production lines moving. The modular approach also makes it straightforward to adapt cutting grades for different machining tasks. Built for industry and workshop demands with dependable handling Weighing in at approximately 0.502 kg, the cutter balances manoeuvrability and robustness for routine handling and fixture changes. The combination of a standard shank, common Torx clamping and compatibility with widely used insert formats supports integration into existing tool inventories. For procurement and service, Metav’s supply chain provides centralised access and reliable fulfilment to keep workshops supplied. For procurement, technical clarification or to arrange delivery of the Teknik Makina S218TM shaft cutter, contact Metav Werkzeuge GmbH in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for professional assistance and fast supply. Technical data Article number: S218TM Manufacturer: Teknik Makina Description: Shaft cutter for APKT 0903 indexable inserts Facts Shank diameter: 20 mm Cutting length: 60 mm Cutting edges: 3 Cutting angle: 90° Overall length: 200 mm Weight: 0.502 kg Torx screw: M2.5x7 Torx key: T8 Special features Designed for APKT 0903 indexable inserts Compatible with Walter inserts Indexable insert system for fast edge change Balanced weight for handling and stability FAQ Which inserts fit this cutter? The S218TM shaft cutter is designed for APKT 0903 indexable inserts and is compatible with Walter-manufactured inserts. What are the main dimensions of the tool? Key dimensions for the S218TM are a 20 mm shank, 60 mm cutting length and 200 mm overall length; weight is approx. 0.502 kg. How is the insert secured? Inserts are fixed with a M2.5x7 Torx screw; a T8 Torx key is required for tightening. How many cutting edges does the cutter provide? The cutter uses 3 cutting edges, enabling balanced cutting forces and steady chip evacuation. For which operations is the cutter intended? The S218TM is intended for face and shoulder milling where APKT 0903 indexable inserts are specified, offering quick edge replacement and integration into standard tooling systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Shank Milling Cutter For APKT 1003 Indexable Inserts, 3 Flutes, 90mm Overall Length - Teknik Makina
Take advantage of the combination of robust shank design, compatibility with APKT 1003 indexable inserts and secure Torx clamping for uninterrupted production. Order the indexable milling cutter directly via Metav Werkzeuge or consult the team for application-specific advice. Indexable milling cutter S767TM – 20 mm shank, 3 cutting edges by Teknik Makina Indexable milling cutter S767TM designed for efficient face and shoulder milling with APKT 1003 indexable inserts, suitable for general-purpose machining in workshop and light production environments. 20 mm shank diameter 90 mm overall length For APKT 1003 indexable inserts 3 cutting edges for stable cutting Torx screw M2.5×5.5, Torx key T8 Consistent performance through solid shank and secure clamping The combination of a 20 mm shank and a compact 90 mm overall length provides a stable toolholder interface and reduced overhang, which directly improves stiffness and repeatability in milling operations. With a rigid connection between tool and spindle, vibration is minimised and the achievable surface finish is improved. The supplied Torx screw M2.5×5.5 with T8 drive ensures positive clamping of the insert seat, lowering the risk of insert movement under load and extending productive tool life. Optimised cutting behaviour with three cutting edges Featuring three cutting edges, the cutter balances chip load and feed per tooth to deliver efficient material removal while keeping cutting forces moderate. The design is tailored for indexable inserts in the APKT 1003 format, enabling quick index changes and consistent geometry across edges. Using standardised inserts from Palbit simplifies supply logistics and reduces set-up time, making the tool a pragmatic choice for batch runs and mixed-material jobs where insert rotation and replacement are preferred over regrinding. Seamless integration into workshop workflows and maintenance The tool’s geometry and fastening system support fast insert replacement and straightforward maintenance, contributing to shorter tool-change times and higher machine uptime. Compatibility with widely available APKT 1003 inserts means stock management is simplified, while the defined Torx fastening keeps consumables consistent across the production line. For production planners and maintenance teams, this results in fewer interruptions and predictable tool performance, which supports stable cycle times and easier process standardisation. Contact Metav Werkzeuge for tailored technical advice on Teknik Makina indexable milling cutters and to request further specifications by e‑mail at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: S767TM Manufacturer: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Core measurements Shank diameter: 20 mm Cutting diameter: 20 mm Overall length: 90 mm Number of cutting edges: 3 Torx screw: M2.5×5.5 Torx key: T8 Compatibility & features For APKT 1003 indexable inserts Compatible with Palbit inserts Indexable insert type: APKT 1003 Fastening: Torx screw M2.5×5.5 FAQ Which inserts fit this cutter? The cutter accepts APKT 1003 indexable inserts; Palbit-manufactured APKT 1003 inserts are compatible with the S767TM from Teknik Makina. What are the key dimensions to check for toolholder compatibility? Check the shank diameter of 20 mm and the overall length of 90 mm to ensure correct fitment in the intended toolholder and sufficient clearance for the application. How many cutting edges does the tool provide and what is the benefit? The S767TM has three cutting edges; this geometry balances material removal rate and cutting forces to deliver stable machining and improved surface quality. What fastening hardware is supplied and which key is required? Fastening uses a Torx screw M2.5×5.5 and requires a T8 Torx key for secure insert clamping and straightforward replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Shank Milling Cutter for APKT 1003-1604 Indexable Inserts, 3 Flutes 60mm Cutting Length, 90° Cutting Angle - Teknik Makina
Take advantage of precise indexable-insert compatibility, a compact 20 mm shank and a 60 mm cutting length for consistent milling performance — order directly via Metav Werkzeuge or consult the Metav team for application advice. Shank milling cutter S036TM by Teknik Makina — 20 mm diameter, for APKT 1003–1604 indexable inserts The Shank milling cutter S036TM is a compact indexable-insert milling tool engineered for reliable shoulder and face milling with APKT 1003–1604 inserts 20 mm diameter shank 60 mm cutting length 3 cutting edges for stable milling Compatible with APKT 1003–1604 inserts Productivity through proven insert compatibility The S036TM is built around the proven economy of indexable inserts. Accepting APKT 1003–1604 types and matching common suppliers such as YG‑1, the tool reduces downtime associated with regrinding: worn cutting edges are replaced in seconds rather than hours. This approach yields a clear operational advantage — consistent geometry across changes preserves cycle times and contributes to a predictable production process. For procurement and production planners, the combination of insert interchangeability and a compact tool body contributes to lower lifecycle costs and simplified tooling logistics. Stable cutting performance and predictable results With a 20 mm shank diameter and a 60 mm cutting length, the tool provides a balance between rigidity and reach. The 3 cutting edges and a 90° cutting angle are optimised for shoulder milling and facing tasks where square corners and flat surfaces are required. Engineers benefit from reduced vibration and improved surface finish because the cutter geometry maintains cutting forces within predictable ranges. For teams unfamiliar with insert terminology: indexable inserts are replaceable carbide tips mounted to the cutter body, combining the affordability of consumable tips with the accuracy of a solid tool system. Secure clamping and simple maintenance The insert clamping is executed with a Torx screw (M2.5×5.5) tightened with a T8 key, ensuring a repeatable and robust seat for each insert change. This standardised fastening minimises the risk of incorrect torque and supports safe operation under typical milling loads. Maintenance routines are therefore straightforward: inspect, loosen the Torx screw, replace the insert and retorque to specification. The light overall mass and compact footprint make handling simple on the shop floor while supporting frequent insert changes without special equipment. Application fit and workshop efficiency Designed as an insert milling solution, the cutter suits workshops seeking flexibility between roughing and finishing by varying insert grades and geometries. The tool’s compatibility with a common insert family allows rapid adaptation to different materials and cutting strategies without replacing the entire cutter body. For production managers, the core benefit is clear: fewer toolholders to stock, faster tool changes, and the ability to scale cutter performance through insert selection. The S036TM therefore functions as a practical building block in modular tooling systems. Contact Metav Werkzeuge today for tailored application advice and to secure the Teknik Cutting Tools shank milling cutter S036TM — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific operations Technical data SKU: S036TM Type: Shank milling cutter for APKT 1003–1604 indexable inserts Brand: Teknik Makina Core measurements Diameter: 20 mm Shank diameter: 20 mm Cutting length: 60 mm Overall length: 150 mm Cutting edges: 3 Cutting angle: 90° Weight: 0.368 kg Compatibility & special features Compatible inserts: APKT 1003–1604 Suitable insert manufacturer: YG‑1 Torx screw: M2.5×5.5 Torx key: T8 FAQ Which insert types fit this cutter? The shank milling cutter S036TM is designed for APKT 1003–1604 indexable inserts and is compatible with inserts from manufacturers such as YG‑1 What are the main dimensions to check for machine setup? Key dimensions are 20 mm diameter, 60 mm cutting length and 150 mm overall length; these determine tool clearance and holder compatibility How is the insert secured and which key is required? Inserts are secured with a Torx screw (M2.5×5.5) using a T8 key for reliable clamping on the S036TM How many cutting edges are available and what do they offer? The cutter provides 3 cutting edges, offering a balance of cutting stability and efficient chip evacuation for shoulder and face milling Is the S036TM suitable for rapid insert changes on the shop floor? Yes — the design and standard Torx fastening enable quick, repeatable insert changes to support efficient shop‑floor workflows Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Shank Milling Cutter For ENMX 0604 Indexable Inserts, 3 Cutting Edges, 130mm - Teknik Makina
Combine stable clamping with quick insert changes and compatibility for ENMX 0604 indexable inserts to maintain steady throughput on milling operations; the robust 20 mm shank and three cutting edges support repeatable performance. Order the Shaft milling cutter S108TM directly via Metav Werkzeuge or ask the consultants if needed. Shaft milling cutter S108TM — 20 mm shank, for ENMX 0604 indexable inserts (Teknik Makina) A precision shaft milling cutter S108TM designed for use with ENMX 0604 indexable inserts, intended for medium-duty milling where stability and fast insert replacement are priorities. 20 mm shank diameter for stable clamping Compatible with ENMX 0604 indexable inserts Three cutting edges for balanced cutting M2.5x7 Torx fixing screw, T8 key Consistent rigidity for accurate machining and reduced vibration The tool’s 20 mm shank is engineered to deliver stable clamping in conventional collets and toolholders, which translates into reduced vibration and improved surface finish. Rigidity during milling minimises chatter and contributes to longer insert life; this means fewer interruptions and more predictable component tolerances. By choosing a cutter with a substantial shank diameter and balanced geometry, machining cycles become more reliable, particularly on operations where dimensional repeatability is essential. Fast insert changes and secure fixing to save production time Compatibility with ENMX 0604 indexable inserts enables rapid insert swaps; the M2.5x7 Torx fixing screw and supplied T8 key secure each insert positively for safe, repeatable clamping. The tool features three cutting edges, which provide a compromise between chip evacuation and cutting stability; this geometry reduces toolholder loads while maintaining effective material removal. For workshops that run medium-volume production or mixed batches, the simplified insert handling lowers downtime and streamlines tool management. Designed for predictable tool life and straightforward service With an overall length of 130 mm and a cutting diameter of 20 mm, the cutter balances reach with stiffness, making it suitable for face and light shoulder milling tasks where access is required without sacrificing control. The tool’s construct reduces the frequency of regripping and recalibration, supporting consistent cycle times and easier scheduling. Supplied data indicate direct compatibility with inserts from YG-1, which helps to align procurement and stock management for faster replenishment and fewer production holds. Contact Metav Werkzeuge for tailored application advice and to secure the S108TM shaft milling cutter for reliable production — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: S108TM Manufacturer: Teknik Makina Article: Shaft milling cutter For indexable inserts: ENMX 0604 Compatible insert maker: YG-1 Dimensions & core data Diameter: 20 mm Shank / clamping diameter: 20 mm Overall length: 130 mm Cutting edges: 3 Fixing screw: M2.5x7 Torx key: T8 Eclass: 21180806 ETIM: EC011860 Special features & materials Designed for ENMX 0604 indexable inserts Three-flute design for balanced cutting Positive Torx fixation for secure insert clamping Brand: Teknik Makina FAQ Which insert type fits the cutter? The cutter is designed for ENMX 0604 indexable inserts, allowing direct use of those plates in the S108TM for predictable cutting geometry. Is the tool compatible with YG-1 inserts? Yes, compatibility with YG-1 inserts is indicated; the S108TM accepts ENMX 0604 inserts produced by that manufacturer. What are the key dimensions to check for toolholder fit? Relevant dimensions are the 20 mm shank diameter and the 130 mm overall length; these determine clamping compatibility and reach. How is the insert secured in the cutter? Inserts are fastened using an M2.5x7 Torx screw; a T8 key is specified for secure tightening and reliable repeatability. For which applications is this cutter best suited? The tool is suitable for medium-duty milling tasks where a balance of stiffness, accessible reach and fast insert changes are required; typical uses include face milling and light shoulder operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Shell End Mill For APMT 0602 Indexable Inserts 5 Flutes 30mm Cutting Height, 90° Cut Angle - Teknik Makina
Take advantage of the combination of high rigidity, quick insert changeover and compact dimensions for consistent machining results; order the cutter via Metav Werkzeuge or consult our specialists for application advice. Shank milling cutter S030TM — 20 mm shank, for APMT 0602 indexable inserts by Teknik Makina Shank milling cutter S030TM designed for indexable APMT 06 inserts, engineered for reliable insert clamping and repeatable results in production toolrooms 20 mm shank diameter For APMT 06 indexable inserts 30 mm cutting height Requires T6 Torx key Engineered stiffness for steady, predictable machining The S030TM is built around a 20 mm shank and a 120 mm overall length, a combination that balances accessibility with rigidity to reduce chatter and maintain surface quality. With 5 cutting edges and a 30 mm cutting height, the tool enables efficient material removal while keeping tool deflection low; the 90° cutting angle supports square shoulder machining and predictable corner geometry. The modest mass (0.26 kg) helps preserve spindle dynamics, especially in medium-duty milling tasks, so cycle times stay stable and repeatability improves. Quick insert changes and secure clamping minimise downtime This milling cutter accepts APMT 06 indexable inserts and is compatible with Korloy inserts, allowing standardised inventory and rapid on-machine servicing. The insert is secured with a M1.8x4.1 Torx screw tightened with a T6 key for toolroom-standard clamping torque and repeatable seating. Indexable inserts are small, replaceable carbide tips that can be rotated or renewed without regrinding a whole tool body — a cost-efficient approach that reduces tooling waste and simplifies workshop logistics while keeping machining precision high. Practical fit for modern workshops and CNC setups Designed by Teknik Makina, the cutter's 20 mm diameter and compact 120 mm length make it straightforward to integrate into milling spindles and modular tool holders. The consistent geometry of indexable tooling supports predictable process planning and shorter setup intervals. For shops seeking reliable insert tooling with straightforward maintenance, this cutter delivers a compact footprint, standard fastening hardware and compatibility with widely available APMT 06 inserts — features that collectively support higher machine utilisation and fewer unplanned stoppages. Contact Metav Werkzeuge for application guidance on the Teknik Makina S030TM shank milling cutter and fast supply — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: S030TM Manufacturer: Teknik Makina Suitable for inserts: APMT 06 Compatible insert manufacturer: Korloy Core data Shank diameter: 20 mm Cutter diameter: 20 mm Cutting height: 30 mm Overall length: 120 mm Cutting angle: 90° Number of cutting edges: 5 Weight: 0.26 kg Special features Torx screw: M1.8x4.1 Torx key size: T6 For APMT 0602 indexable inserts SKU: S030TM FAQ What inserts does this cutter accept? The shank milling cutter S030TM accepts APMT 06 indexable inserts and is compatible with Korloy APMT 06 grades. How are the inserts secured and which key is required? Inserts are held with a M1.8x4.1 Torx screw; a T6 Torx key is used for tightening and removal on the S030TM. Is the S030TM suitable for high-speed machining? The S030TM is designed for stable, repeatable milling with indexable inserts; compatibility with high-speed applications depends on machine capability and chosen insert grade. Can the cutter be used with inserts from other manufacturers? The S030TM is specified for APMT 06 format inserts; interchangeable inserts from other manufacturers that match this format and seat geometry can be used provided clamping and seat fit are correct. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Shell Mill For ANHX 1004-1206 Indexable Inserts, 90° Cutting Angle, 30mm Cutting Length - Teknik Makina
Take advantage of the combination of ANHX 1004–1206 insert compatibility, a 20 mm shank and a 30 mm cutting length for consistent, productive milling results; order the tool directly via Metav Werkzeuge or consult our specialists for application guidance. Shank cutter S783TM – 20 mm shank, for ANHX 1004–1206 indexable inserts | Teknik Makina A Shank cutter S783TM engineered for indexable-insert milling, offering secure insert clamping and a compact cutting length for precision pocketing and shoulder milling in CNC operations 20 mm shank for rigid toolholding Compatible with ANHX 1004–1206 inserts Three cutting edges for balanced cutting 160 mm overall length for extended reach Consistent performance through insert compatibility The S783TM is designed around the proven ANHX 1004–1206 indexable insert system, ensuring fast insert changes and predictable cutting geometry. Compatibility with Palbit-type inserts simplifies supply chains and reduces tooling variants on the shop floor. With a 90° cutting angle, the tool supports square-shoulder milling and precise face finishes; this combination yields stable forces and repeatable results in series production. The focus on insert interchangeability translates into lower downtime and a predictable cost-per-part for production planners. Rigidity and reach balanced for everyday milling A 20 mm shank provides the rigidity required for consistent chip evacuation and reduced vibration, while the 160 mm overall length gives sufficient reach for medium-depth pockets. The 30 mm cutting length balances tool engagement and stiffness, helping to maintain dimensional accuracy without sacrificing accessibility. The compact mass (approx. 0.058 kg) makes handling and tool changes straightforward, and the geometry supports stable toolholding in common milling arbors and collets, improving surface quality and tool life. Secure clamping and fast service intervals Insert retention is achieved using the supplied fastener configuration: T8 Torx drive and M3x7 screw for reliable seating under cyclic loads. This familiar fastening standard allows for quick, toolroom-friendly maintenance and reduces the learning curve for operators. The cutter’s three cutting edges distribute load evenly, which moderates wear on each edge and extends the interval between insert indexings. As a result, cycle times remain steady and maintenance planning becomes simple and predictable. Integration into workshop workflows Intended for installation in standard CNC toolholders, the cutter integrates smoothly into existing machining processes without the need for special fixtures. The compact design supports efficient nesting of tools in tool magazines and reduces collision risk in tight setups. For procurement and workshop managers, the combination of insert compatibility, standard fastener types and a robust shank offers a pragmatic route to lower tooling complexity and improved throughput in everyday milling operations. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Makina shank cutter S783TM into production setups — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: S783TM Manufacturer: Teknik Makina Facts Shank diameter: 20 mm Cutting length: 30 mm Overall length: 160 mm Number of cutting edges: 3 Weight: 0.058 kg Cutting angle: 90° Special features For ANHX 1004–1206 indexable inserts Compatible with Palbit insert systems Torx key: T8 Torx screw: M3x7 FAQ Which inserts fit this shank cutter? The cutter is compatible with ANHX 1004–1206 indexable inserts, enabling quick insert swaps and supply-chain alignment with Palbit-style inserts. How is the insert secured on the cutter? Insert retention uses a T8 Torx drive and an M3x7 screw, providing secure seating under milling loads and straightforward maintenance. What advantages do three cutting edges provide? The three cutting edges distribute cutting forces evenly, reducing individual edge wear and helping to maintain consistent surface finish over longer intervals. Can the cutter be used in standard CNC toolholders? Yes; the shank design and dimensions are intended for connection to normal milling arbors and toolholders, facilitating integration into existing tool magazines. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Shell Mill for R390-11T3 Indexable Inserts 3 Flutes 90° Cut, 40mm Cut Length - Teknik Makina
Take advantage of a compact, rigid shank milling solution with a 20 mm shank diameter, a 40 mm cutting length and compatibility with Sandvik R390-11T3 indexable inserts for consistent shoulder and slot milling — order or consult via Metav Werkzeuge for tailored supply and advice. Shank milling cutter S592TM — 20 mm shank, for R390-11T3 indexable inserts (Teknik Makina) The Shank milling cutter S592TM is a solid holder designed to accept R390-11T3 indexable inserts for industrial milling tasks, combining a compact 20 mm shank with a 90° cutting angle for secure axial and radial milling operations. 20 mm shank diameter for rigid clamping Accepts R390-11T3 indexable inserts Three cutting edges for steady material removal Torx M2.5x7 clamping screw with T8 key Exceptional rigidity for repeatable results The holder’s 20 mm shank and 120 mm overall length form a compact interface that reduces deflection during medium-duty milling. The combination of a short, sturdy shank and a 90° cutting angle delivers a predictable cutting force direction, which improves positional accuracy at every pass. For workshops aiming to raise first-pass yield, the mechanical stability of this tool reduces vibration and supports consistent surface finish quality — an economic benefit through fewer reworks and shorter cycle times. Fast insert changes and low downtime Equipped for the common R390-11T3 insert format and supplied with a Torx M2.5x7 clamping screw operated with a T8 key, this holder simplifies insert replacement and clamp torque control. The indexable system means worn cutting edges are replaced rather than whole tools, lowering consumable costs and shortening maintenance intervals. The three-edge seating ensures even load distribution across the insert, which helps to extend indexable insert life and maintain cutting performance between changes. Practical reach and handling for shopfloors With a 40 mm cutting length, a nominal 20 mm diameter and a tool weight of approximately 0.27 kg, this shank tool balances reach with manoeuvrability for fixtures and compact setups. The geometry is suitable for shoulder milling and light slotting where the R390 family is proven. The modest mass aids in quick tool changes and handling on the machine, while the standard interface supports integration into existing tool holders without additional adapters, keeping set-up time and inventory complexity to a minimum. Secure precision machining supplies from Teknik Cutting Tools through Metav Werkzeuge — for detailed compatibility checks or order fulfilment contact Metav Werkzeuge in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: S592TM Manufacturer: Teknik Makina Facts Shank diameter: 20 mm Cutting length (shank): 40 mm Overall length: 120 mm Number of cutting edges: 3 Weight: 0.27 kg Cutting angle: 90° Special features Accepts R390-11T3 indexable inserts Torx clamping screw M2.5x7 Torx key size T8 Compatible with Sandvik insert systems FAQ What insert type fits this holder? The holder accepts R390-11T3 indexable inserts; compatibility has been verified for inserts from Sandvik. Which shank diameter does the tool use? The tool features a 20 mm shank diameter, designed for rigid clamping in standard tool holders. How many cutting edges are provided by the insert seating? The cutter is set up for three cutting edges, enabling steady material removal and balanced loading on the insert. What is the cutting length and overall reach? The assembly provides a 40 mm cutting length with a 120 mm overall length, suitable for medium-reach milling tasks. Which clamping screw and key are required for insert changes? A Torx M2.5x7 clamping screw is specified, to be operated with a T8 Torx key. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Shell Mill For XOMX 0602-1204 Indexable Inserts, 2 Flutes 90° Cutting Angle, 45mm Cutting Length - Teknik Makina
Take advantage of a robust milling solution that combines versatile compatibility with precise dimensions and secure clamp fastening for predictable machining results. Benefit from the 20 mm shank and compatibility with SECO XOMX 1204 indexable inserts for straightforward tool replacement — order via Metav Werkzeuge or consult our specialists for application advice. Teknik Makina Shank Milling Cutter S638TM — for XOMX 0602-1204 Indexable Inserts, 20 mm Shank Teknik Makina Shank Milling Cutter S638TM is a shank-type milling tool designed for indexable-insert turning and milling applications in industrial production. 20 mm shank diameter for stable clamping Compatible with SECO XOMX 1204 indexable inserts Two cutting edges for efficient material removal Torx T10 screw M3.5x8.5 for secure insert fastening Reliable performance from a compact shank design The shank-style cutter delivers a 20 mm shank that provides consistent clamping in standard tool holders, reducing vibration and improving surface finish. Its compact dimensions and 120 mm overall length make the tool suitable for common tool posts and milling arbors where reach and rigidity must be balanced. The tool’s geometry supports stable cutting behaviour, and the two cutting edges offer efficient metal removal while keeping cutting forces predictable. Fast reconditioning and compatibility for reduced downtime Designed for use with XOMX 1204 indexable inserts, the cutter simplifies maintenance: worn cutting edges are replaced quickly without regrinding, which lowers toolroom time and keeps production moving. The insert seat and locking system use a Torx T10 screw (M3.5x8.5) for reliable clamping, ensuring the insert remains secure under machining loads. Compatibility with established SECO insert formats provides access to a wide range of grades and geometries for varied materials. Predictability through clear specifications and industrial fit Measured and documented dimensions support process planning and fixture design: a 20 mm shank diameter, 45 mm cutting length, and 120 mm overall length enable accurate setup and consistent repeatability. The cutter’s 90° cutting angle gives neutral face engagement suitable for facing and slotting operations where perpendicular contact is required. These precise values allow engineers to calculate cutting parameters and choose matching holders with confidence, improving cycle-time estimates and part quality. Built for workshop integration and practical handling At 0.5 kg, the tool is heavy enough to feel robust while remaining easy to handle during tool changes. The solid shank profile and standard fastening method make the cutter straightforward to install in existing setups. Using standardised indexable inserts reduces inventory complexity because the same insert family can be stocked for multiple toolholders. This practical approach supports lean tooling strategies and simplifies spare-part management in the workshop. For application matching or to source the Teknik Makina S638TM with compatible SECO XOMX 1204 inserts, contact Metav Werkzeuge — our consultants provide machining advice and can recommend suitable insert grades for specific component materials. Technical data Article number: S638TM Manufacturer: Teknik Makina Designation: Shank milling cutter for XOMX 0602-1204 indexable inserts Facts Shank diameter: 20 mm Cutting length (shank): 45 mm Overall length: 120 mm Cutting edges: 2 Diameter: 20 mm Weight: 0.5 kg Cutting angle: 90° Special features Compatible with SECO inserts For XOMX 0602-1204 indexable inserts Torx screw: M3.5x8.5 Torx key size: T10 FAQ What insert type does this cutter use? The cutter is designed for XOMX 1204 indexable inserts and is compatible with SECO XOMX 0602–1204 insert formats for straightforward replacement. Which shank and overall dimensions should be expected? The Tekniк Makina S638TM features a 20 mm shank diameter, a 45 mm cutting length, and a 120 mm overall length for predictable setup and clamping. How are the inserts secured in the cutter? Inserts are fixed using a Torx screw (M3.5x8.5) tightened with a T10 Torx key, providing a secure clamp under normal milling loads. How many cutting edges are available and what is their effect? The tool has two cutting edges; this arrangement balances material removal rate and cutting force, supporting efficient machining with manageable power requirements. Is the tool suited for standard toolholders? The shank profile and 20 mm diameter are compatible with commonly used toolholders and arbors, allowing easy integration into existing setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Solid Carbide Cutter For APMT 11T3 Indexable Inserts 2 Flutes 30mm Cutting Length, 90° - Teknik Makina
Take advantage of a rigid Ø20 mm shank combined with a 30 mm effective cutting length for consistent surface quality and reduced vibration; the modular design for APMT 11T3 indexable inserts keeps downtime to a minimum. Order directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. S234TM — Shank milling cutter for APMT 11T3 indexable inserts, Ø20 mm, 30 mm cutting length (Teknik Makina) The S234TM is a shank milling cutter purpose-built to accept APMT 11T3 indexable inserts, providing secure insert clamping and repeatable performance across a wide range of milling tasks Shank Ø20 mm for stable clamping 30 mm effective cutting length Compatible with APMT 11T3 indexable inserts Torx M2.5x5.5 screw, T8 key required High rigidity for predictable cycle times and improved surface finish A robust holder geometry with a Ø20 mm shank and a 30 mm cutting length translates into greater rigidity at the cutting edge, which reduces chatter and delivers a more consistent finish on workpieces. The combination of these dimensions and a substantial overall length of 210 mm stabilises the tool during deep cuts and interrupted cuts alike. With two cutting edges, index changes are infrequent yet fast, so machining cycles stay predictable and tool costs are kept under control. The measured mass of 0.523 kg contributes to good dynamic balance on modern milling spindles, supporting reproducible results in serial production. Fast insert changes and economical tooling strategy The holder is compatible with APMT 11T3 indexable inserts and is listed as suitable for inserts from Korloy, enabling the use of widely available geometries and grades. Insert clamping is secured by a Torx M2.5x5.5 screw; the required key size is T8, allowing quick replacement without special fixtures. Indexable inserts permit multiple cutting edges per insert, so the effective cost per cutting edge is reduced and maintenance becomes a matter of minutes rather than hours. For operations where rapid throughput and low tooling logistics are priorities, this modular approach supports leaner tooling inventories and faster machine turnarounds. Geometry tuned for right‑angle operations and versatile milling A 90° cutting angle gives this shank milling cutter natural aptitude for shoulder milling, slotting and milling of right-angled contours with minimal setup complexity. The tool’s geometry balances the need for aggressiveness and control: suitable for light to medium cuts while maintaining edge stability. The two-edged concept supports alternating cutting directions and can improve chip evacuation compared with single-edge designs. Where tight tolerances and square shoulders are required, this configuration helps deliver repeatable dimensional accuracy with reduced rework. Reliable supply and application support from a precision partner Sourcing tooling through a specialist distributor offers tangible benefits for production planning. Metav combines a broad product range with a local quality filter based in Emmerich, providing stable supply and documented product integrity for industrial buyers. Established relationships with thousands of customers and a catalogue that covers precision metrology and workshop tooling make procurement simpler and reduce the number of suppliers involved in a project. For buyers evaluating process changes or scaling production, availability and consistent performance data are decisive factors in maintaining uptime and cost control. Choose the Teknik Cutting Tools S234TM shank milling cutter for robust right‑angle milling and contact Metav Werkzeuge for tailored application advice and reliable supply from Emmerich: info@metav-werkzeuge.com · +49 2822 7131930 Technical data SKU: S234TM Manufacturer: Teknik Makina Article name: Shank milling cutter for APMT 11T3 indexable inserts ECLASS: 21180806 ETIM: EC011860 Facts Shank diameter: 20 mm Cutting length (shank): 30 mm Diameter: 20 mm Number of cutting edges: 2 Overall length: 210 mm Weight: 0.523 kg Cutting angle: 90° Special features Compatible inserts: APMT 11T3 Suitable insert supplier: Korloy Torx screw: M2.5x5.5 Torx key: T8 FAQ Which inserts fit this holder? The holder accepts APMT 11T3 indexable inserts; Korloy grades are listed as compatible and offer a broad choice of chipbreakers and grades. How is the insert secured in the tool? Insert clamping is via a Torx M2.5x5.5 screw; a T8 key is required for secure and repeatable fastening. What operations is the tool geometry best suited to? The 90° cutting angle and rigid shank make the tool ideal for shoulder milling, slotting and right‑angle work where square corners and consistent surface finish are required. How does the tool support productivity in serial production? A combination of Ø20 mm shank rigidity, 30 mm cutting length and two cutting edges reduces vibration, shortens downtime for index changes and contributes to stable cycle times. Is the tool balanced for high-speed spindles? With an overall length of 210 mm and a mass of 0.523 kg, the holder offers good dynamic behaviour for typical milling setups; balance will depend on the chosen insert and clamping condition. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Solid Carbide End Mill For APMT 0602 Indexable Inserts, 5 Flutes, 30mm Cutting Length - Teknik Makina
Optimise machining cycles with a robust 20 mm shank and five cutting edges for consistent chip control; the M2x4.2 Torx fixing with T6 key enables fast insert changes and secure clamping. Order the shank cutter directly via Metav Werkzeuge or contact our consultants for specification support. S006TM Shank Cutter by Teknik Makina — for APMT 0602 indexable inserts, 20 mm shank S006TM Shank Cutter designed for secure clamping and quick insert replacement in medium-duty milling applications For APMT 0602 indexable inserts 20 mm shank diameter for robust clamping Five cutting edges for smooth engagement Quick replacement with M2x4.2 Torx screw Faster cycle times through indexable-insert efficiency The use of APMT 0602 indexable inserts delivers a cost-efficient route to high material removal without the need for full regrinding or reconditioning. With a 20 mm shank, the tool offers enhanced rigidity at the spindle, which reduces chatter and supports higher feed rates where appropriate. The combination of insert indexing and the cutter’s geometry leads to predictable tool life and lower tooling cost per component, making it a pragmatic choice for batch production and mixed-series work. Secure set-up and rapid maintenance for production continuity Tool changeovers are simplified by the M2x4.2 Torx screw and compatible T6 key, allowing technicians to replace inserts swiftly and safely. The cutter’s five cutting edges distribute the cutting load evenly across the circumference, improving engagement stability and offering a more uniform surface finish on the workpiece. These features reduce downtime and make the tool suitable for workshops that require repeatable set-ups and fast recovery between jobs. Built to integrate with existing tool systems and inventory With a measured 110 mm overall length and a 30 mm cutting length, the shank cutter balances reach and stiffness for common milling tasks. Compatibility with Korloy indexable inserts means simple inventory management for customers already sourcing that brand, while the standardised fixing method aligns with common workshop procedures. The tool’s practical dimensions and standardised insert format support straightforward tool holder selection and inventory rationalisation. Contact Metav Werkzeuge for tailored advice on toolholders, delivery times and inventory support—call +49 2822 7131930 or email info@metav-werkzeuge.com and benefit from direct supply from Emmerich Technical data SKU: S006TM Manufacturer: Teknik Makina Shank diameter: 20 mm Cutting length: 30 mm Overall length: 110 mm Diameter: 20 mm Number of cutting edges: 5 Weight: 0.24 kg For APMT 0602 indexable inserts Compatible insert manufacturer: Korloy Torx screw: M2x4.2 Torx key: T6 Cutting angle: 90° FAQ Which inserts fit this shank cutter? The shank cutter accepts APMT 0602 indexable inserts; compatibility with Korloy inserts is stated for straightforward sourcing and stocking. How is the insert secured and which tool is required? Inserts are fixed with an M2x4.2 Torx screw; a T6 key is used for tightening and replacement to ensure reliable clamping. What are the key dimensions to check for toolholder selection? Check the 20 mm shank diameter, 110 mm overall length and 30 mm cutting length to ensure correct toolholder and reach for the application. Is this cutter suitable for high-volume production? The combination of a rigid 20 mm shank and indexable inserts makes the cutter suitable for repetitive production where predictable tool life and rapid insert changes are priorities. What is the product SKU for ordering or reordering? Order using SKU S006TM to ensure the correct Teknik Makina shank cutter is supplied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Solid Carbide End Mill For RDMW 0702 Indexable Inserts, 3 Flutes 45mm Cutting Length - Teknik Makina
Achieve repeatable, cost-efficient milling through the combination of a rigid 20 mm shank and compatibility with RDMW 0702 indexable inserts; the secure Torx clamping enables rapid insert changes and reduced downtime. Order the shaft milling cutter directly via Metav Werkzeuge or ask the consultants for application-specific advice. Shaft milling cutter R142TM — indexable insert holder with 20 mm shank (Teknik Makina) The Shaft milling cutter R142TM is a robust indexable-insert milling tool intended for medium-duty milling operations that use RDMW 0702 inserts, offering a balance of stability and accessibility for workshop and production environments. Indexable inserts RDMW 0702 compatible 20 mm shank for stable toolholding 45 mm effective cutting length Secure Torx clamping M2.5x5.5, T8 key Stable clamping and reduced vibration for consistent results With a 20 mm shank and an overall length of 120 mm, this shank cutter provides enhanced rigidity that translates into consistent surface finish and longer insert life. The three-flute configuration delivers a stable cutting action that lowers chatter and helps maintain tolerances over longer runs. In practical terms, that means fewer rejects and less rework in serial production, while the modest tool weight of 0.278 kg makes handling and changeover straightforward on most milling spindles. Quick insert exchange and broad tool compatibility for flexible machining Designed for RDMW 0702 indexable inserts and compatible with Taegutec inserts, the toolholder uses a Torx clamping system (M2.5x5.5 screw, T8 key) to allow fast and secure insert changes. Indexable inserts mean lower per-cutting-edge cost and faster on-site replacement compared with solid-carbide tools. The 45 mm cutting length provides room for a variety of part geometries while keeping the tool projection short enough to preserve stiffness — a clear benefit when switching between roughing and semi-finishing operations. Practical benefits for workshop efficiency and maintenance The R142TM reduces setup complexity: standard Torx tooling simplifies insert retention checks and maintenance intervals, while the compact design minimises tool overhang. The three cutting edges help distribute cutting forces evenly, which can extend the lifespan of both the inserts and the holder. For procurement and inventory planning, the use of common RDMW 0702 inserts and a standard 20 mm shank supports parts consolidation, reducing the number of different tools required in the cabinet and speeding up changeovers on the shop floor. Contact Metav Werkzeuge today to discuss integrating Teknik Cutting Tools' R142TM into production or to request tailored recommendations from the Metav Werkzeuge team in Emmerich Technical data SKU: R142TM Product name: Shaft milling cutter for RDMW 0702 indexable inserts Manufacturer: Teknik Makina Facts Shank diameter: 20 mm Cutting length: 45 mm Overall length: 120 mm Diameter: 20 mm Number of cutting edges: 3 Weight: 0.278 kg Special features Compatible inserts: RDMW 0702 Suitable insert manufacturer: Taegutec Clamping screw: M2.5x5.5 (Torx) Torx key size: T8 FAQ Which inserts fit this toolholder? The shaft milling cutter R142TM accepts RDMW 0702 indexable inserts and is specified for inserts from manufacturers such as Taegutec, ensuring wide availability and interchangeability. How is the insert secured and exchanged? Inserts are clamped with a Torx screw M2.5x5.5; exchange and torqueing are performed using a T8 Torx key to achieve secure and repeatable clamping. What are the key dimensions affecting machine setup? Key dimensions are the 20 mm shank diameter, 45 mm effective cutting length, and 120 mm overall length, which together determine required spindle holder and allowable tool projection. How many cutting edges does the tool provide and why that matters The tool features three cutting edges, which balance chip removal and cutting forces to reduce chatter and improve tool life in many milling operations. Is this holder suitable for long-reach applications? With an overall length of 120 mm and a 20 mm shank, the cutter is intended for moderate reach; longer overhangs will reduce stiffness and should be avoided for high-precision tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Solid Carbide End Mill for VDKT 11T2 Indexable Inserts With Internal Coolant, 100mm Length - Teknik Makina
Take advantage of the combination of secure clamping, integrated internal coolant and straightforward insert compatibility for efficient milling operations; order directly via Metav Werkzeuge or request tailored advice from our consultants. Shank milling cutter for VDKT 11T2 indexable inserts — Teknik Makina, 20 mm shank, internal coolant Shank milling cutter for VDKT 11T2 indexable inserts with internal coolant, designed to accept Korloy inserts and to integrate seamlessly into workshop tooling systems. 20 mm shank for stable clamping Internal coolant for improved insert life Compatible with VDKT 11T2 Korloy inserts 100 mm overall length, 30 mm cutting length Precision and compatibility that reduce setup time This Shank milling cutter is engineered to accept VDKT 11T2 indexable inserts, a common geometry that simplifies stocking and reduces machine downtime. The combination of a 20 mm shank and a compact overall length ensures stable clamping in standard holders, which translates into consistent machining results. Indexable inserts allow cost-effective replacement of the cutting edge without regrinding the body, so toolholding changeovers are fast and repeatable — a clear productivity advantage for batch and continuous production runs. Improved thermal control for longer tool life Integrated internal coolant supplies cutting fluid directly to the insert seat, which improves cooling and helps evacuate chips from the cutting zone. By reducing thermal stress on the insert and insert seat, the cooling channel contributes to steadier cutting conditions and more predictable toolwear. For operations where process stability and repeatability matter, this internal supply is a decisive factor in maintaining surface finish and dimensional accuracy over longer cycle times. Practical design for efficient maintenance and handling With a 30 mm cutting length and two cutting edges, the tool delivers balanced engagement with predictable chip formation. Insert retention is secured with M2.5x5.5 torx screws, tightened using a T8 key for quick and reliable insert changes. The accessible screw design and standardised insert form make routine maintenance straightforward, keeping downtime to a minimum and simplifying staff training in the workshop. Suitable integration into production workflows As a modular milling solution, the cutter fits into existing tool inventories where VDKT 11T2 inserts are already used, enabling flexible process planning. It is suitable for machining tasks where insert change speed, coolant delivery and secure toolholding are priorities. The robust specification supports use in general-purpose milling fixtures and can be incorporated into both manual and CNC setups without costly adapter requirements. For enquiries about Teknik Makina's S399TM shank milling cutter and supply from Metav Werkzeuge, please contact Metav Werkzeuge in Emmerich for delivery and technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 — our specialists will advise on fixture compatibility and lead times. Technical data Article number: S399TM Product type: Shank milling cutter Manufacturer: Teknik Makina Facts Shank diameter: 20 mm Overall length: 100 mm Cutting length: 30 mm Number of cutting edges: 2 Weight: 0.314 kg Torx screw: M2.5x5.5 Torx key: T8 Special features Internal coolant Compatible inserts: VDKT 11T2 Compatible insert manufacturer: Korloy SKU: S399TM FAQ What type of inserts does this cutter accept? The cutter accepts VDKT 11T2 indexable inserts; it is supplied to work with Korloy inserts in that geometry. Is internal coolant available on this tool? Yes, the tool is equipped with internal coolant, which delivers coolant directly to the insert seat to aid cooling and chip evacuation. What are the shank and overall lengths of the milling cutter? The milling cutter features a 20 mm shank and a 100 mm overall length, with a 30 mm cutting length. Which screw and key are required for insert changes? Insert retention uses an M2.5x5.5 torx screw that is tightened with a T8 key; the design allows fast and secure insert replacement. Who manufactures this shank milling cutter and what is the SKU? The tool is manufactured by Teknik Makina and sold under SKU S399TM, designed for VDKT 11T2 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Solid Carbide End Mill for WNGX 0403 Indexable Inserts, M2.5x5.5 Torx Screw - Teknik Makina
Take advantage of proven compatibility and a compact, rigid design to shorten set‑up times and maintain consistent machining quality; the combination of a secure Torx fixing and standard WNGX 0403 insert interface supports efficient tool changes and reliable repeatability — order directly via Metav Werkzeuge or consult our specialists for any application questions. Shank cutter S944TM — Indexable cutter for WNGX 0403 inserts, Ø20 mm (Teknik Makina) A shank cutter S944TM designed for secure mounting of WNGX 0403 indexable inserts, intended for general indexable‑insert milling tasks in production and job‑shop environments. Ø20 mm shank diameter For WNGX 0403 indexable inserts Torx screw M2.5×5.5, key T8 110 mm overall length, 3 cutting edges Faster set‑ups thanks to standard insert compatibility The combination of a standard interface for WNGX 0403 indexable inserts and a proven clamp system reduces inventory complexity and shortens downtime between jobs. Because the tool accepts widely used Korloy inserts, procurement and replacement are simplified, which in turn improves tool availability on the shop floor. The secure Torx fixing (M2.5×5.5) operated with a T8 key ensures clamping repeatability and straightforward insert changes without complex fixtures, contributing to leaner tool management. Compact dimensions that support rigidity and surface consistency A Ø20 mm shank and a total length of 110 mm balance reach and stiffness to maintain stable cutting conditions. The tool’s three cutting edges distribute cutting forces across multiple contact points, reducing vibration and promoting consistent surface finish. For milling operations where stability affects part quality, this compact configuration helps keep tolerances tight while allowing practical tool overhang for common set‑ups. Simple maintenance and secure fixing for productive workshops The carriage and screw arrangement is configured for quick insert replacement and secure retention under load. The specified Torx screw size and key type standardise maintenance routines and lower the risk of incorrect fastenings. Compatible with Korloy WNGX 0403 inserts, the cutter is suitable for shops that prioritise predictable tool change cycles and a minimal learning curve for operators, supporting uninterrupted production rhythm. Contact Metav Werkzeuge today to discuss the Teknik Cutting Tools S944TM shank cutter, confirm its fit for specific machining tasks and arrange delivery from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: S944TM Manufacturer: Teknik Makina Article designation: Shank cutter for WNGX 0403 Indexable Inserts Diameter: 20 mm Overall length: 110 mm Cutting edges: 3 Shank diameter (clamp): 20 mm Torx screw: M2.5×5.5 Torx key: T8 Compatible inserts: Korloy WNGX 0403 eClass: 21180806 ETIM: EC011860 Numbers / Core technical data Diameter: 20 mm Overall length: 110 mm Cutting edges: 3 Shank diameter: 20 mm Torx screw dimension: M2.5×5.5 Torx key size: T8 Designs / Special features Compatible with Korloy WNGX 0403 inserts Torx screw M2.5×5.5 with T8 key Indexable insert system Manufacturer: Teknik Makina SKU: S944TM FAQ Are Korloy WNGX 0403 inserts compatible with this tool? Yes. The shank cutter S944TM is designed for WNGX 0403 indexable inserts and accepts Korloy‑specification plates. What are the shank and overall dimensions? The tool has a Ø20 mm shank and an overall length of 110 mm, providing a compact but usable overhang. How many cutting edges does it have and why does that matter? It has three cutting edges; this layout spreads the cutting load, reduces vibration and helps maintain a consistent surface quality. What Torx screw and key are required for insert clamping? Clamping uses a Torx screw sized M2.5×5.5 and requires a T8 key for tightening and removal. Is this cutter suitable for production use in job shops? Yes. The standard insert interface, secure Torx fixing and compact geometry make it appropriate for routine indexable‑insert milling operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
High-performance shank cutters and ball nose cutters for efficient milling
Insert shank cutters and ball nose cutters combine flexibility and productivity for a wide range of milling tasks. The category covers steel-bodied shank cutters fitted with indexable inserts for economical roughing, face milling, cornering and slotting, as well as ball nose cutters for contouring and 3D finishing.
How these tools work and where they belong
Shank cutters with indexable inserts use a carrier body made from hardened steel; the cutting edges are provided by removable inserts rather than a solid tool blank. Where tools do not have internal coolant, process heat and chips are managed via external coolant nozzles or compressed air, which is sufficient for open, surface-level and easily accessible milling on standard materials. Shank cutters with internal coolant feature fine internal channels that deliver coolant or blasting air directly to each cutting edge under pressure. This targeted supply is essential for deep pockets, cavities, full slotting and machining of heat-resistant or difficult-to-machine materials, because it prevents chip re-cutting, protects cutting edges from thermal overload and enables higher feed rates and improved surface quality.
Cut cycle times and reduce tooling costs
- Replaceable indexable inserts reduce consumable costs and shorten tool change time.
- Targeted internal coolant improves chip evacuation and extends insert life.
- Robust steel carrier bodies enable heavy-duty roughing without frequent tool replacement.
- Suitable for roughing, planing, corner milling and slot milling as well as precision 3D profiling with ball nose cutters.
A practical choice for purchasing and stocking tools
Metav brings a pragmatic purchasing advantage: a broad range of milling solutions is available from a single European quality hub. Metav’s focus on democratising precision means workshops benefit from a wide assortment, consistent quality control from Emmerich and steady supply — supported by decades of expertise and over 48,000 satisfied customers. Choose Metav for a centralised sourcing strategy that reduces supplier complexity while keeping access to both insert milling cutters (also referred to as insert milling cutters or indexable end mills) and ball nose cutters (also known as ball nose end mills or radius cutters) straightforward.
Quick summary
Insert shank cutters and ball nose cutters deliver flexible, cost-effective milling: replaceable inserts lower running costs, and internal coolant options enable higher performance and longer tool life where chip control is critical.
FAQ
When should I choose a shank cutter with indexable inserts rather than a solid carbide end mill?
Choose shank cutters with indexable inserts for economical roughing and high-stock-removal tasks where replacing inserts is preferable to replacing an entire tool; they are especially effective for face milling, cornering and slotting operations.
Does internal coolant make a measurable difference for ball nose cutters?
Yes. Internal coolant directed to each cutting edge reduces chip re-cutting and thermal stress, which improves surface finish and increases insert life when machining deep pockets, cavities or heat-resistant materials.
Can shank cutters without internal coolant be used for general workshop milling?
Absolutely. Tools without internal coolant rely on external coolant nozzles or compressed air and are well suited to open, superficial and easily accessible milling on standard materials.
What milling operations are shank cutters for indexable inserts typically used for?
Shank cutters with indexable inserts excel at economical roughing, planfräsen (face milling), corner milling and slot milling; ball nose cutters are the preferred choice for 3D profiling and finishing operations.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com