Efficient shaft cutters and ball nose cutters for versatile milling
Shaft cutters and ball nose cutters serve as robust rotating tools for roughing, face milling, corner milling and slotting, offering economical replacement of indexable inserts rather than whole solid tools. Available in versions with internal coolant to feed lubricant directly to each cutting edge or without internal coolant relying on external nozzles, these cutters ensure effective chip evacuation and thermal control suited to standard materials or deep pocket and cavity work. By preventing chip re-cutting and protecting cutting edges, they deliver higher feed rates, improved surface finish and extended tool life in demanding metalworking applications.
20mm End Mill For APXT 1003 Indexable Inserts 3 Flutes 30mm Cutting Length 100mm Overall Length, 90° Cutting Angle - Teknik Makina
Benefit from reliable, indexable-insert milling that combines a 20 mm shank with three robust cutting edges and direct compatibility with APXT 1003 inserts; order this solution directly via Metav Werkzeuge or consult the technical team for application advice. Shank Cutter S144TM – insert milling body, 20 mm shank, for APXT 1003 indexable inserts (Teknik Makina) The Shank Cutter S144TM is an indexable-insert milling body engineered for shoulder and face milling where quick insert changes and process stability are required, compatible with APXT 1003 inserts for efficient production work 20 mm shank diameter Compatible with APXT 1003 indexable inserts Three cutting edges for stable machining Overall length 100 mm Precise fit and reliable compatibility for indexable-insert milling The S144TM body is designed around a 20 mm shank, providing rigid clamping and reduced runout compared with slimmer holders. Compatibility with APXT 1003 indexable inserts and recognised Korloy grades enables fast insert replacement and predictable tool life, which contributes directly to lower downtime and consistent surface finish. The assembly is secured with a Torx screw M2.5×5.5, tightened with a T8 key, simplifying on-machine maintenance and tool changes while maintaining repeatable seating of each insert. Stable cutting geometry that improves cycle times A three-cutting-edge configuration paired with a 90° cutting angle gives a balance of material removal capacity and surface quality, especially for shoulder milling and light facework. The 30 mm cutting length and symmetric insert arrangement permit stable feeds and reduced vibration, which often leads to shorter cycle times in repetitive operations. Selecting a cutter body that accepts indexable inserts reduces the expense of full-tool replacement and allows the machining strategy to focus on productivity and cost-efficiency. Workshop practicality and safe handling With an overall length of 100 mm and modest mass of 0.231 kg, the tool body is compact and easy to handle during setup and changeover. The indexable concept makes inserts the wearing component; the tool body itself requires minimal servicing, supporting lean workshop practices. The use of a standard Torx fastening method ensures compatibility with common toolkits and a secure clamping interface, promoting operator confidence and consistent seating torque across multiple insert changes. Suitability across machining tasks and materials Designed for flexible integration into milling workflows, this milling body suits a range of general-purpose applications where APXT 1003 inserts are recommended. The combination of rigid 20 mm shank, insert-based regrindability and clearly defined fixing hardware enables stable performance in conventional CNC equipment and reduces the need for multiple full-profile cutters, thereby simplifying inventory and tool management. For reliable supply from the Metav Werkzeuge European warehouse and technical consultation on integrating the Teknik Makina S144TM into specific machining processes, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930; order via Metav Werkzeuge for assured availability and expert advice. Technical Data Article number: S144TM Manufacturer: Teknik Makina Designation: Shank cutter for APXT 1003 indexable inserts Facts Shank diameter: 20 mm Cutting length: 30 mm Overall length: 100 mm Diameter: 20 mm Number of cutting edges: 3 Weight: 0.231 kg Cutting angle: 90° Torx screw: M2.5×5.5 Torx key: T8 Special features Compatible with APXT 1003 indexable inserts Suitable for Korloy inserts Indexable-insert milling body Quick insert replacement via Torx fastening FAQ What inserts fit this milling body? The S144TM is specified for APXT 1003 indexable inserts; Korloy grades matching that index are compatible and commonly used with this cutter body. How is the insert secured in the cutter body? Inserts are secured by a Torx screw M2.5×5.5, tightened with a T8 key, ensuring repeatable clamping and simple replacement. What machining tasks is the cutter body designed for? This indexable-insert milling body is intended for shoulder and face milling where a 90° cutting angle and stable, repeatable performance are required. Does the tool require frequent servicing? The body itself is low-maintenance; wear is concentrated on the indexable inserts, which can be replaced individually to extend service intervals. Is the cutter suitable for automated tool change systems? The compact 100 mm overall length and standardised 20 mm shank make the body compatible with many CNC holders and automated tool systems, provided the machine accepts a 20 mm shank diameter. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm End Mill for Korloy XNKT 0604 inserts - Teknik Makina
Comprehensive Technical Specifications: Order Number: S834TM Item: End Mill usable with XNKT 0604 Indexable Inserts of Korloy Brand: Teknik Makina Metric Information: Diameter: 20mm Cutting Edges: 2 Weight: 0.365kg Total length: 150mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
20mm End Mill for LNMX 0402 Indexable Inserts Internal Coolant, 80mm Cutting Length - Teknik Makina
Take advantage of the combination of a 20 mm shank, internal coolant and five cutting edges for stable clamping, consistent chip control and efficient material removal — order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Shank milling cutter S092TM — 20 mm shank, internal coolant, for LNMX 0402 indexable inserts (Teknik Makina) The Shank milling cutter S092TM is a precision tool designed for insert-based milling with LNMX 0402 indexable inserts; it combines a compact 20 mm shank with internal coolant delivery to support consistent machining performance. 20 mm shank diameter for stable clamping Internal coolant for improved chip evacuation 5 cutting edges for smooth material removal Compatible with LNMX 0402 inserts (Korloy) Consistent performance through optimised geometry The tool body and flute design deliver repeatable cutting conditions with a focus on process reliability. The combination of a 20 mm shank and five flutes provides a favourable balance between rigidity and cutting engagement, helping to reduce vibration during operation. With an 80 mm cutting length and a total length of 200 mm, the geometry is well suited to many standard holder systems while maintaining stability. These parameters help to achieve steady feed rates and consistent surface quality in insert milling operations. Improved cooling and chip control for longer tool life Internal coolant routing supplies cutting fluid directly to the cutting zone, supporting heat dissipation and chip evacuation. This internal delivery reduces the risk of built-up edge and assists insert performance under continuous cutting, so insert wear is more predictable. The built-in coolant functionality is particularly beneficial when working on longer passes or interrupted cuts, as it promotes heat management and helps maintain the cutting edge condition of LNMX 0402 inserts from compatible makers such as Korloy. Practical clamping and maintenance details Insert fastening uses a Torx system for secure and repeatable assembly: Torx T6 key and a M1,8x4,1 screw allow straightforward insert changes and reliable clamping torque. The cutter accepts standard LNMX 0402 indexable inserts, which simplifies stockkeeping and reduces machine downtime when replacements are needed. At a nominal weight of 0.4 kg, the tool is easy to handle when fitting into holders, while the solid shank diameter supports accurate concentricity and safe engagement in collets or shell mill holders. Reliable sourcing and workshop support Sourced from Teknik Makina and available through Metav Werkzeuge, this cutter benefits from distribution that emphasises quality control and traceability. Metav’s European hub in Emmerich acts as a quality filter and logistics centre, supporting workshops and production facilities with consistent availability. For engineering teams seeking predictable performance and compatible insert systems, the package of internal coolant, stable shank design and established insert format reduces procurement complexity and supports continuous production. Contact Metav Werkzeuge for tailored guidance on the S092TM shank milling cutter, request detailed technical drawings or confirm availability by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: S092TM Product type: Shank milling cutter Brand: Teknik Makina Numbers / Core technical data Diameter: 20 mm Total length: 200 mm Shank diameter: 20 mm Cutting length: 80 mm Number of cutting edges: 5 Weight: 0.4 kg Torx key: T6 Torx screw: M1,8x4,1 Designs / Special features Internal coolant For LNMX 0402 indexable inserts Compatible insert manufacturer: Korloy FAQ What insert type does this cutter use? The cutter accepts LNMX 0402 indexable inserts; the geometry is tailored for this insert format and compatibility with Korloy inserts is specified for the S092TM shank milling cutter. Is the tool supplied with coolant through the body? Yes, the tool features internal coolant channels to deliver cutting fluid directly to the cutting zone, which supports chip evacuation and thermal control. Which screw and key are required to secure inserts? Insert clamping uses a M1,8x4,1 screw tightened with a Torx T6 key for reliable, repeatable fastening of LNMX 0402 inserts. What are the main dimensions to consider when selecting holders? Key dimensions are the 20 mm shank diameter, 80 mm cutting length and 200 mm total length — these should be matched with the machine holder’s clamping capacity and reach. Who manufactures the cutter and who is responsible for distribution? The cutter is produced by Teknik Makina and distributed via Metav Werkzeuge; the SKU for reference is S092TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm End Mill for LNMX 0603 Indexable Inserts Internal Coolant 200mm L, 3 Flutes - Teknik Makina
Take advantage of the combination of high clamping stability, integrated coolant and proven compatibility with LNMX 0603 inserts to maintain consistent cycle times and reduced tool-change downtime. Order directly via Metav Werkzeuge or consult our technical advisers for matching inserts and holder setup. Indexable end mill for LNMX 0603 — 20 mm shank, internal coolant (Teknik Makina) The Indexable end mill for LNMX 0603 indexable inserts is designed for secure, repeatable milling operations with internal coolant and a rigid 20 mm shank. 20 mm shank diameter for stable clamping Internal coolant feed for improved chip evacuation Compatible with LNMX 0603 inserts by Korloy Stability and accuracy for repeatable production The combination of a 20 mm shank and a robust body provides the rigidity required for steady cutting forces and reduced runout. The tool's 3 cutting edges distribute load evenly, which helps to produce consistent surface finish and extends insert life under cyclic conditions. The model marked S285-2TM has been engineered to keep vibration low during indexing changes, supporting predictable machining tolerances and fewer rejected parts. Cooling and maintenance that save time on the shop floor Built-in internal coolant directs fluid directly to the cutting zone, improving chip control and thermal management during extended cycles. This targeted cooling reduces thermal distortion and can lengthen the service intervals for inserts. The cutter accepts LNMX 0603 indexable inserts (compatible with Korloy), and insert retention is secured with a Torx screw requiring a Torx T8 key and M3x7 screw—items commonly found in maintenance kits—allowing fast, straightforward insert changes and minimal downtime. Dimensions and handling tailored for production workflows With a 200 mm overall length and an 80 mm cutting length, the tool suits medium-reach milling tasks where balance between reach and rigidity is required. At approximately 0.4 kg, the assembly is manageable for manual handling and automated tool changers alike. The design supports systematic tool management: predictable geometry, quick insert swaps and straightforward identification on the tool list all help to reduce setup time and maintain throughput in batch production. For procurement or to confirm compatibility with existing setups, contact Metav Werkzeuge for a personalised recommendation and reliable supply from Emmerich — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data SKU: S285-2TM Manufacturer: Teknik Makina Product type: Indexable end mill Compatible inserts: LNMX 0603 (Korloy) Facts Diameter: 20 mm Overall length: 200 mm Shank diameter: 20 mm Cutting length: 80 mm Cutting edges: 3 Weight: 0.4 kg Torx key: T8 Torx screw: M3x7 Special features Internal coolant Designed for indexable inserts Compatible with Korloy LNMX 0603 inserts FAQ What insert type fits this cutter? The tool accepts LNMX 0603 indexable inserts; the cutter is supplied to accommodate that insert form and seat geometry. Is the coolant internal or external? This cutter features internal coolant, which supplies cutting fluid directly to the cutting zone for improved chip evacuation. Which toolholder shank size is required? The cutter uses a 20 mm shank diameter, compatible with toolholders and collets designed for a 20 mm shank. How many cutting edges does the tool have? The design incorporates 3 cutting edges, offering balanced load distribution during milling. What is the overall and cutting length of the tool? The tool has a 200 mm overall length and an 80 mm cutting length, suited to medium-reach operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm End Mill for LNMX 0603 Indexable Inserts Internal Coolant, 3 Flutes, 50mm Cutting Length - Teknik Makina
Take advantage of precise indexable milling with controlled cooling and secure clamping: the combination of a 20 mm shank, internal coolant and compatibility with LNMX 0603 inserts ensures consistent cycle times and straightforward insert changes. Order the tool directly via Metav Werkzeuge or consult our specialists for application support. Indexable end mill body S285-1TM — 20 mm shank, internal coolant (Teknik Makina) The Indexable end mill body S285-1TM is an insert-holder designed for LNMX 0603 indexable inserts, providing productive peripheral and slot milling in standard machining operations *20 mm shank diameter *Internal coolant supply *Compatible with LNMX 0603 Korloy inserts *130 mm overall length Precise compatibility for reliable indexable milling The holder is engineered for defined insert geometry and repeatable seating to deliver stable cutting results. With support for LNMX 0603 indexable inserts, the tool body ensures accurate insert positioning and consistent cutting geometry across cycles. The combination of a 20 mm shank and a 130 mm overall length provides a balance between rigidity and reach, reducing chatter in typical milling setups. For production planning, the secure fit and standardised insert clamping reduce downtime during index changes, resulting in measurable productivity gains. Controlled cooling and sustained cutting performance Integral coolant channels feed cutting fluid directly to the insert rake zone, improving chip evacuation and temperature management. The internal coolant supply lowers cutting temperatures and extends insert life, especially under continuous or semi-continuous cutting loads. With 3 cutting edges and a 50 mm cutting length, the design supports moderate axial engagement while maintaining chip control. Explaining the effect plainly: directing coolant to the cutting edge reduces thermal wear and enables more consistent surface finish, which is particularly useful for medium-duty finishing and roughing operations. Practical handling and workshop serviceability Assembly and service use common workshop tools: the insert clamp is secured with an M3x7 Torx screw and adjusted using the T8 Torx key, allowing quick insert replacement without specialised equipment. The compact mass (approx. 0.325 kg) and standard 20 mm shank make the holder compatible with many toolholders and milling spindles. The component’s geometry supports safe seating of LNMX 0603 inserts from Korloy, so replacement parts are widely available. For inventory and traceability, the item is listed as S285-1TM and manufactured by Teknik Makina, making procurement and reorders straightforward. For tailored selection advice and to check stock availability of the Teknik Makina indexable end mill body, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for expert guidance and swift delivery Technical data SKU: S285-1TM Manufacturer: Teknik Makina Suitable for inserts: LNMX 0603 Compatible insert supplier: Korloy Facts Diameter: 20 mm Overall length: 130 mm Shank diameter: 20 mm Cutting length: 50 mm Weight: 0.325 kg Cutting edges: 3 Special features Internal coolant supply Torx screw: M3x7 Torx key: T8 Indexable cutter body for LNMX 0603 inserts FAQ What inserts fit this tool body? The tool accepts LNMX 0603 indexable inserts; the holder is compatible with LNMX 0603 inserts supplied by Korloy. Is the coolant routed internally? Yes, the tool features internal coolant channels to direct fluid to the cutting zone for improved chip evacuation and tool life. Which fastener and key are required for insert changes? Insert clamping uses an M3x7 Torx screw, typically adjusted with a T8 Torx key. What are the main dimensions for setup planning? Key dimensions are 20 mm shank diameter and 130 mm overall length; the cutting length is 50 mm. How is the tool identified for reordering? The item is listed under SKU S285-1TM and is supplied by Teknik Makina. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm End Mill For LNMX Indexable Inserts 2 Flute 25mm Cutting Length 120mm Overall Length, 90° Cutting Angle - Teknik Makina
Take advantage of the precise combination of a 20 mm shank and 2 cutting edges for reliable, repeatable milling results; the tool’s LNMX 1006 compatibility and secure Torx clamping reduce setup time and tool change interruptions. Order the shank mill directly via Metav Werkzeuge or consult our experts for a tailored recommendation. Shank mill LN099TM — 20 mm shank, 2 cutting edges, Teknik Makina The Shank mill is a robust cutter designed for use with LNMX indexable inserts, delivering straightforward insert changes and consistent shoulder milling in industrial production environments 20 mm shank diameter for rigid clamping Compatible with LNMX 1006 Korloy inserts Two cutting edges for efficient material removal M3x7 Torx clamping screw with T8 key required High rigidity for consistent, repeatable machining results The tool’s 20 mm shank and 120 mm overall length provide a stable connection to the spindle, which reduces vibration and runout during operation. This rigidity translates into improved edge life of the insert and more consistent surface finishes, especially when carrying out shoulder milling or light facing operations. The combination of a solid shank diameter and compact overall geometry makes the cutter well suited to shop-floor setups where repeatability matters and where minimising rework is a priority. Quick insert changes and secure clamping reduce downtime Designed for indexable insert technology, the cutter accepts LNMX 1006 inserts and is compatible with Korloy plate geometries, simplifying procurement and inventory. With 2 cutting edges and a 90° cutting angle, the tool offers predictable engagement and chip formation. Insert retention uses an M3x7 Torx screw, tightened with a T8 key, which ensures reliable clamping and fast exchange times on the machine, lowering non-productive time and supporting higher machine utilisation. Practical handling and workshop benefits for everyday use Weighing 0.292 kg, the milling cutter is easy to handle during tool changes and setup. The cutter’s modest weight, combined with its defined cutting length of 25 mm, allows for controlled axial penetration and predictable cutting behaviour. The simple, indexable design reduces tooling complexity in the tool crib and makes replacement straightforward. For procurement and traceability, use SKU LN099TM when ordering or enquiring about identical replacements. For reliable supply and practical advice, request the Teknik Cutting Tools shank mill LN099TM via Metav Werkzeuge — Metav’s team in Emmerich will assist with availability and technical matching at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: LN099TM Manufacturer: Teknik Makina Type: Shank mill for LNMX indexable inserts Dimensions & Performance Shank diameter: 20 mm Cutting length (shank): 25 mm Overall length: 120 mm Cutting edges: 2 Cutting angle: 90° Weight: 0.292 kg Compatibility & Special Features Compatible inserts: LNMX 1006 Compatible insert manufacturer: Korloy Torx screw: M3x7 Torx key: T8 Intended for indexable insert milling FAQ Which inserts fit this cutter? The cutter accepts LNMX 1006 indexable inserts; compatibility with Korloy plate geometries is specified for straightforward sourcing and inventory planning. How is the insert secured in place? Insert clamping is via an M3x7 Torx screw, which requires a T8 key for tightening and removal to ensure secure and repeatable retention. What does the 90° cutting angle mean in practice? A 90° cutting angle provides a square shoulder capability, making the tool suitable for facing and shoulder milling where a defined corner and stable engagement are required. Is the cutter suitable for high-speed operations? The design focuses on rigidity and reliable insert retention; machining parameters should be chosen according to the insert specifications and machine capability rather than assuming universal high-speed suitability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm End Mill For R390-11T3 Indexable Inserts 90° Cutting Angle, 50mm Cutting Length - Teknik Makina
Take advantage of a robust combination of precision and compatibility: the tool's 20 mm shank and 50 mm cutting length deliver stable, repeatable milling with Sandvik indexable inserts, while secure Torx fastening reduces downtime. Order the tool directly via Metav Werkzeuge or consult our specialists for integration support. Shank cutter for R390-11T3 indexable inserts — compact, rigid milling with Sandvik compatibility Shank cutter for R390-11T3 indexable inserts designed for secure clamping and precise face or slot milling where R390-11T3 inserts are specified 20 mm shank diameter 50 mm cutting length Compatible with Sandvik R390-11T3 inserts Three cutting edges for stable milling Greater process stability through a compact, rigid design The combination of a 20 mm shank and a balanced 200 mm overall length offers a high level of rigidity that reduces vibration during cutting, directly improving surface finish and tool life. With a 50 mm cutting length and a 90° cutting angle, the tool is engineered for repeatable material removal in operations that demand consistent geometry. Using indexable inserts such as the R390-11T3 eliminates regrinding and simplifies maintenance, translating technical features into measurable time savings on the shop floor. Fast insert changes and secure clamping cut downtime Maintenance and insert replacement are simplified by the Torx screw M2.5x5.5 and the compatible T8 key, ensuring repeatable clamping torque and reduced setup error. The cutter’s three cutting edges distribute cutting forces evenly, which lowers the risk of premature insert failure and keeps machines productive for longer. These practical design elements support a rational investment case: fewer interruptions, predictable maintenance cycles, and reduced tooling inventory when standardised on widely available inserts. Integrates seamlessly into existing tooling systems Designed around the widespread R390 series, the tool allows shops to keep a compact insert inventory while benefiting from a proven insert geometry by Sandvik. The combination of standard interfaces and a familiar fastening system enables quick retrofitting into existing holders and toolpaths. For production planners, this means faster changeovers and improved throughput without the need for specialised holders or bespoke adjustments — a clear operational advantage in mixed-production environments. Practical reliability for everyday workshop use Weighing 0.48 kg and finished to industry tolerances, the cutter offers a practical balance between handling convenience and machining robustness. The apparent simplicity of the tool belies careful engineering: a standardised connection to commonly used inserts provides peace of mind and predictable performance in repetitive milling tasks. Where traceability and repeatability matter, this combination of features supports consistent component quality and fewer unexpected rejects. For quick integration of Teknik Makina tooling into existing workflows, contact Metav Werkzeuge for tailored advice and assured supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S596TM Manufacturer: Teknik Makina Product: Shank cutter for R390-11T3 indexable inserts Compatible inserts: R390-11T3 (Sandvik) Torx screw: M2.5x5.5 Torx key: T8 eClass: 21180806 ETIM: EC011860 Core measurements Shank diameter: 20 mm Cutting length (shank): 50 mm Overall length: 200 mm Diameter: 20 mm Cutting edges: 3 Cutting angle: 90° Weight: 0.48 kg Features Compatible with Sandvik R390-11T3 indexable inserts Torx fastening for secure insert clamping Three cutting edges for balanced cutting forces Standard interface for simple integration SKU: S596TM FAQ Which inserts fit this cutter? The shank cutter is designed for the R390-11T3 indexable inserts; compatibility with Sandvik inserts is specified in the technical data. What is the shank diameter and overall length? Shank diameter is 20 mm and overall length is 200 mm, as stated in the product specifications. How many cutting edges does the tool have and what is the cutting angle? The tool has three cutting edges and a 90° cutting angle for stable face and slot milling. How are inserts secured and which tool is required for changes? Inserts are clamped using a Torx screw M2.5x5.5; a T8 key is required for secure insert changes. Is this cutter suitable for integration into existing tool setups? Yes — its standardised interface and compatibility with R390-11T3 inserts allow straightforward integration into holders and workflows that accept Sandvik-style indexable inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm End Mill for RPMW 0803 Indexable Inserts With M3x7 Torx Screw, 130mm Overall Length - Teknik Makina
Take advantage of a rigid 20 mm shank and a 130 mm overall length combined with compatibility for RPMW 0803 indexable inserts to keep production running with predictable performance; order directly via Metav Werkzeuge or consult our specialists for application advice. R312TM shaft cutter – 20 mm diameter, for RPMW 0803 indexable inserts (Teknik Makina) A robust R312TM shaft cutter designed for use with RPMW 0803 indexable inserts, engineered to support secure clamping and straightforward insert replacement in industrial milling operations 20 mm shank for secure toolholding Compatible with RPMW 0803 inserts Three cutting edges for balanced removal Torx M3x7 clamping with T8 key Increased rigidity for consistent machining results A solid 20 mm shank and a 20 mm body diameter provide enhanced stiffness during cutting, which reduces vibration and improves surface quality. The larger shank diameter stabilises the toolholder interface and helps maintain concentricity under load, resulting in more predictable tool life and fewer rejects. For operations where stability is critical, this rigidity translates into reduced set-up frequency and more efficient cycle times. Quick insert changes and reliable clamping Clamping is achieved with a Torx M3x7 screw that uses a T8 key, offering a compact and secure fastening method for RPMW 0803 inserts. The standardised screw interface simplifies maintenance and shortens downtime when inserts need replacing or indexing. Compatibility with Korloy RPMW 0803 inserts ensures easy procurement of cutting edges, while the Torx drive reduces the risk of screw cam‑out compared with non‑specialist fasteners. Balanced cutting performance with optimised geometry Equipped with three cutting edges, the tool body provides a balance between material removal rate and load distribution. The tri‑edge arrangement promotes steady chip formation and smoother tool engagement, which supports consistent cutting forces and reduces peak loads on each insert. With an overall length of 130 mm, the design offers useful reach while limiting deflection; the combination of length and geometry is suited to many milling setups where access and stiffness must be balanced. Seamless integration into production workflows Designed as a cutter body for RPMW 0803 indexable inserts, this product fits standard 20 mm toolholders and is suitable for systematic replacement strategies in production environments. Clear specifications and a standardised clamping system make the unit straightforward to catalogue and stock. When paired with Metav’s supply and consulting services, procurement and spare‑part planning become part of a reliable workflow that supports predictable delivery and traceable quality. Contact Metav Werkzeuge today for tailored advice on Teknik Makina cutters and to confirm the best insert and holder pairing for a given application; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: R312TM Product name: Shaft cutter for RPMW 0803 indexable inserts Manufacturer: Teknik Makina Facts Diameter: 20 mm Shank diameter: 20 mm Overall length: 130 mm Cutting edges: 3 Special features Torx clamping screw M3x7 Torx key size T8 Compatible inserts: RPMW 0803 (Korloy) eCl@ss: 21180806 ETIM: EC011860 FAQ How does this cutter secure the indexable inserts? Clamping is effected by a Torx M3x7 screw; the screw is driven with a T8 key to lock RPMW 0803 inserts securely in place on the cutter body. Which insert type is compatible with this tool body? The cutter is designed for RPMW 0803 indexable inserts, compatible with inserts from Korloy and other suppliers offering that insert format. What are the key dimensions of the tool? The tool has a diameter and shank of 20 mm and an overall length of 130 mm, providing a balance between reach and stiffness. How many cutting edges does the cutter provide? The body accepts arrangements with three cutting edges, giving balanced cutting forces and steady chip formation. Who manufactures the cutter and who is responsible for distribution? The cutter is produced by Teknik Makina and supplied via Metav Werkzeuge for European customers. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm End Mill for Sandvik R390-11T3 inserts - Teknik Makina
Detailed Technical Data: Item: End Mill Brand: Teknik Makina Order Number: S594TM usable with R390-11T3 Indexable Inserts the Hersteller's Sandvik Diameter: 20mm Angle: 90° Total length: 150mm Cutting Edges: 3 Weight: 0.348kg Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
20mm End Mill for SPMG 0502-0904 Indexable Inserts 2 Flutes 50mm Cutting Length, M2.5x7 Torx Screw - Teknik Makina
Maximise milling reliability with the combination of a 20 mm shank and a 50 mm cutting length, delivering stable clamping and extended engagement for repeatable cycles; compatibility with SPMG indexable inserts keeps inventory lean. Order the S824TM directly via Metav Werkzeuge or contact our specialists for tailored advice. Schaftfräser S824TM – Shank milling cutter, 20 mm shank, for SPMG indexable inserts (Teknik Makina) Schaftfräser S824TM is a compact shank milling cutter designed for high-repeatability operations with indexable inserts; suited to general milling and finishing tasks in production and toolrooms 20 mm shank diameter for stable clamping 50 mm cutting length for extended engagement Compatible with Taegutec SPMG 07T3 inserts Two cutting edges for efficient material removal Consistent cycle times through secure shank design The robust 20 mm shank and precise geometry reduce runout and vibration, which directly improves tool life and workpiece consistency. With a 50 mm cutting length, the tool enables deeper engagement without compromising stability, helping to maintain target tolerances across production runs. The mechanical setup minimises forced rework and supports predictable cycle times, which is particularly relevant for jobbing shops and production cells seeking reliable throughput. Efficient material removal with indexable-insert flexibility Equipped to accept SPMG-series indexable inserts, the cutter combines the economy of replaceable cutting edges with high material-removal performance. The two cutting edges provide a balance between chip control and surface finish, reducing the frequency of edge changes while sustaining productive cutting parameters. Using indexable inserts means machining can continue with minimal interruption: worn inserts are replaced instead of regrinding solid tooling, lowering downtime and maintenance overhead. Designed for straightforward assembly and serviceability The cutter features a Torx screw M2.5x7 (Torx key T8) for secure insert clamping, allowing fast, repeatable insert changes and reliable seating during high-speed use. Clear mechanical fixing reduces setup time at the machine spindle and simplifies tool inventory procedures. The compact mass (approx. 0.198 kg) keeps handling ergonomic for toolroom staff and aids rapid changeover in multi-shift environments. Compatibility that simplifies procurement and stock management Built for compatibility with Taegutec SPMG 07T3 insert types and the SPMG 0502–0904 size range, this cutter helps standardise tooling across machines and operations. Standardisation reduces the variety of spare parts required and streamlines ordering processes, which is beneficial for purchasing teams and maintenance planners aiming to cut complexity without sacrificing capability. The clear spec alignment supports informed decision-making when integrating new cutters into existing tooling families. For tailored procurement and technical guidance on the Teknik Makina S824TM, contact Metav Werkzeuge in Emmerich for a pragmatic consultation and reliable delivery from stock Technical data Article number: S824TM Manufacturer: Teknik Makina Description: Schaftfräser for SPMG 0502-0904 Indexable Inserts ECLASS: 21180806 ETIM: EC011860 Dimensions & core data Shank diameter: 20 mm Cutting length (shank): 50 mm Number of cutting edges: 2 Overall length: 150 mm Weight: 0.198 kg Torx screw: M2.5x7 Features & compatibility Compatible inserts: SPMG 07T3 / SPMG 0502–0904 Torx key size: T8 Suitable for use with Taegutec inserts SKU: S824TM Brand: Teknik Makina FAQ What insert types fit this cutter? The S824TM is designed for SPMG insert sizes (notably SPMG 07T3) and accepts SPMG 0502–0904 indexable inserts compatible with Taegutec specifications. How many cutting edges does the tool provide? This shank milling cutter features two cutting edges, offering a balanced compromise between material removal rate and surface finish. What are the core dimensions to check for toolholder compatibility? Key dimensions include a 20 mm shank diameter and an overall length of 150 mm; confirm your holder accepts a 20 mm shank and the effective sticking-out length suits the operation. Is a special screw or key required for insert clamping? Insert clamping uses a Torx screw M2.5x7 and requires a T8 Torx key for secure fastening and repeatable seating. Which manufacturer produces this cutter and who supplies it? The cutter is a Teknik Makina product (SKU S824TM) and is supplied via Metav Werkzeuge for European customers seeking consolidated tooling supply. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm End Mill for Taegutec RDMW 0702 inserts - Teknik Makina
Product Technical Details: Order Number: R148TM Item: End Mill usable with RDMW 0702 Indexable Inserts the Hersteller's Taegutec Brand: Teknik Makina Quantitative Characteristics: Diameter: 20mm Cutting Edges: 3 Weight: 0.354kg Total length: 150mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
20mm End Mill for XNKU 06T3 Indexable Inserts With Internal Cooling, 60mm Cutting Length - Teknik Makina
Take advantage of the combination of precision, integrated coolant and robust compatibility for secure, repeatable milling results; order the cutter directly via Metav Werkzeuge or ask the consultants for tailored application advice. Schaftfräser S779-1TM – Indexable insert milling cutter, 20 mm shank, internal coolant (Teknik Makina) The Schaftfräser S779-1TM is an indexable insert milling cutter designed for XNKU 06T3 inserts, offering reliable slotting and face milling with integrated internal coolant for improved chip control. 20 mm shank diameter Internal coolant channel Compatible with XNKU 06T3 inserts 60 mm effective cutting length Faster, more consistent metal removal through cooled cutting Equipped with an internal coolant channel and a compact 20 mm shank, the tool keeps the cutting zone flushed and cooled, reducing build-up and improving dimensional stability. The combination of coolant supply and a sturdy shank means fewer interruptions for cleaning and longer intervals between inspections. For machining cycles where uninterrupted performance is required, this configuration supports improved process reliability and steadier surface finish. Simple, secure insert changes that save time Designed for use with XNKU 06T3 indexable inserts (compatible with Palbit inserts), the cutter features a proven clamping design and standard Torx fastening (T8 with M2.5x5.5 screw). The three-edge arrangement ensures effective engagement with the workpiece while simplifying insert rotation and replacement. Clear mechanical interfaces limit downtime during tool changes and facilitate predictable set-up, benefiting small-series production and repetitive operations. Robust construction for workshop and production environments Manufactured by Teknik Makina, the cutter combines a compact overall length with a 60 mm cutting segment to balance reach and rigidity. The tool’s geometry and three cutting edges provide stable cutting forces that reduce vibration and support tool life. The solid design and standardised mounting make the component straightforward to integrate into existing tool holders and machining programmes, assisting maintenance planning and inventory standardisation. For procurement or application guidance on the Teknik Makina S779-1TM shank milling cutter, contact Metav Werkzeuge in Emmerich for expert advice and reliable supply. Technical data Article number: S779-1TM ECLASS: 21180806 Brand: Teknik Makina Facts Diameter: 20 mm Overall length: 160 mm Shank diameter: 20 mm Effective cutting length: 60 mm Number of cutting edges: 3 Weight: 2.212 kg Internal coolant: yes Torx key: T8 Torx screw: M2.5x5.5 Special features Compatible with XNKU 06T3 indexable inserts Recommended insert manufacturer: Palbit Product type: Shank milling cutter SKU: S779-1TM FAQ What inserts fit this cutter best? The cutter is specified for XNKU 06T3 indexable inserts; Palbit-compatible inserts are suitable for the S779-1TM. Does the cutter supply coolant through the tool? Yes, internal coolant is incorporated to assist chip evacuation and temperature control at the cutting edge. How many cutting edges does the tool use? The design employs three cutting edges to balance engagement and load distribution during milling. What fastening hardware is required for the inserts? Insert clamping uses a Torx T8 fixing; the specified screw size is M2.5x5.5 for the S779-1TM. Is the tool ready for direct mounting in standard tool holders? The shank and overall dimensions are standardised for integration into common holders; confirm holder compatibility against the listed 20 mm shank diameter. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm End Mill for XOMX 0602-1204 Indexable Inserts, 55mm Cutting Length, 3 Flutes, 90° - Teknik Makina
Benefit from a robust indexable cutting solution that combines a Ø20 mm shank with a 55 mm cutting length for stable, repeatable results in series milling. Take advantage of straightforward insert replacement and secure clamping to maintain uptime — order the S636TM directly via Metav Werkzeuge or consult our specialists for tailored application advice. Shaft Cutter S636TM — Indexable end mill, Ø20 mm shank, 3 cutting edges (Teknik Makina) The Shaft Cutter S636TM is an indexable end mill designed for secure insert clamping and efficient face and pocket milling with XOMX 0602–1204 indexable inserts Compatible with XOMX 0602–1204 inserts Ø 20 mm shank diameter 55 mm cutting length Three cutting edges, 90° cutting angle Consistent metal-removal performance for production milling This indexable end mill prioritises reproducible cutting performance through a combination of a Ø20 mm shank and a 55 mm cutting length, providing a stable connection between machine and toolholder. With three cutting edges arranged for a 90° cutting angle, the design supports efficient material removal while maintaining surface quality. Using indexable inserts reduces per-part costs because a worn edge is replaced rather than the whole tool, and insert compatibility with XOMX 0602–1204 formats keeps tooling logistics simple. The arrangement of edges and angle is particularly suitable for perpendicular face milling and shallow pocketing where consistent geometry is essential. Secure clamping and fast insert changes to cut downtime The tool features a reliable clamping system using a M2.5x5.5 Torx screw and a T8 key, enabling rapid, repeatable insert changes and minimal setup time between operations. Secure fixation reduces the risk of vibration and positional shift during heavy machining cycles, supporting steady cutting forces and longer insert life. The S636TM is designed for use with inserts from SECO, which ensures straightforward sourcing and compatible cutting geometries. Faster changeovers and predictable clamping behaviour translate directly into improved shop-floor productivity and more consistent batch quality. Practical geometry and reach for workshop flexibility An overall length of 200 mm combined with the compact shank provides reach for a variety of milling tasks while keeping tool overhang manageable. The tool’s modest weight (0.507 kg) contributes to balance and handling during tool changes and reduces strain on toolholders at higher spindle speeds. The indexable configuration supports quick adaptation of cutting parameters by selecting the appropriate insert grade for the workpiece and cutting conditions, making this cutter a pragmatic choice for mixed-production environments where versatility and uptime matter most. For procurement or technical advice on the Teknik Makina S636TM shaft cutter — including questions about insert grades or holder compatibility — contact Metav Werkzeuge in Emmerich for expert guidance and reliable supply. Technical Data Article number: S636TM Brand: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Specifications Shank diameter: 20 mm Cutting length: 55 mm Overall length: 200 mm Diameter: 20 mm Number of cutting edges: 3 Cutting angle: 90° Weight: 0.507 kg Features and compatibility Compatible inserts: for XOMX 0602–1204 Indexable Inserts Torx screw: M2.5x5.5 Torx key: T8 Suitable insert manufacturer: SECO FAQ Which insert formats are compatible with this cutter? The cutter accepts XOMX 0602–1204 indexable inserts; the S636TM is configured to work with these formats for a range of milling tasks. What is the shank diameter and overall length of the tool? The shaft has a 20 mm shank diameter and an overall length of 200 mm, giving a balance of reach and rigidity suitable for many toolholders. How many cutting edges does the cutter have and what is the cutting angle? This indexable end mill is equipped with three cutting edges and a 90° cutting angle, optimised for stable face milling and good surface definition. Which fastener and key are required for insert changes? Insert retention uses a M2.5x5.5 Torx screw tightened with a T8 key, enabling quick and repeatable insert replacements on the S636TM. Is this tool intended for shop-floor production use? Yes — the geometry, secure clamping and indexable design make it suitable for production environments where repeatability and efficient changeovers are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Milling Cutter for BOMT 1304 Indexable Inserts, 40mm Cutting Length, 2 Flutes - Teknik Makina
Combine reliable indexable-insert compatibility with a compact 20 mm shank and a 40 mm effective cutting length for stable, repeatable milling operations; order via Metav Werkzeuge or consult our specialists for application-specific advice. Shaft Milling Cutter S850TM — for BOMT 1304 indexable inserts, 20 mm shank (Teknik Makina) The Shaft Milling Cutter S850TM is a dedicated solid toolholder designed for precision sector milling using BOMT 1304 indexable inserts, suited to industrial steelworking and CNC applications. Compatible with BOMT 1304 indexable inserts 20 mm shank for secure toolholder fit 40 mm effective cutting length for deep cuts Torx clamping screw M3.5x8.5, key T10 Robust tool design for consistent cycle times The S850TM is engineered to maintain machining stability under repetitive load, pairing a 20 mm shank with a well-balanced geometry to reduce vibration and improve surface quality. Compatibility with BOMT 1304 indexable inserts enables flexible selection of edge grades and coatings for different steels, helping to control tool life and part finish. The two-flute configuration supports efficient chip evacuation while retaining sufficient cutting edge for medium to heavy removal tasks. As a consequence, cycle times become more predictable and process control is simplified on milling centres and machining cells. Quick clamping and fast insert replacement to minimise downtime Insert changes are secured by a Torx M3.5x8.5 clamping screw accessed with a T10 key, allowing controlled torque and repeatable seating of the insert pocket. The holder is specified to accept inserts from Ingersoll in the BOMT 1304 form, which standardises supply and reduces inventory complexity. The tool’s modest mass (approx. 0.289 kg) keeps spindle load low while providing sufficient rigidity; this balance supports longer uninterrupted runs and reduces the frequency of balancing operations. Maintenance intervals are shortened through predictable clamping behaviour and straightforward replacement routines, contributing to higher overall equipment effectiveness. Integrates into professional workshops and production lines This shaft milling cutter is suitable for workshops and production environments that demand a pragmatic combination of robustness and flexibility. The dimensional set—20 mm diameter, 40 mm cutting length, 120 mm overall length and two cutting edges—is a practical choice for general steel machining and fits standard toolholders used in small to medium-sized CNC mills. Metav Werkzeuge provides the logistical and advisory support that complements the tool: a centralised supply from Emmerich acts as a quality filter for the European market, ensuring continuity of supply and consistent part performance across batches. Discuss application requirements with Metav Werkzeuge’s specialists or request the S850TM from Metav Werkzeuge for fast, reliable supply and technical guidance from Emmerich. Technical data Article number: S850TM Manufacturer: Teknik Makina Product: Shaft milling cutter for BOMT 1304 indexable inserts Compatible inserts: BOMT 1304 Compatible insert manufacturer: Ingersoll ECLASS: 21180806 ETIM: EC011860 Facts Diameter: 20 mm Shank diameter: 20 mm Effective cutting length: 40 mm Overall length: 120 mm Cutting edges: 2 Weight: 0.289 kg Special features Torx clamping screw M3.5x8.5 Torx key size T10 Designed for indexable inserts BOMT 1304 Suited to steelworking and CNC milling applications FAQ What insert type fits this milling cutter? The cutter accepts BOMT 1304 style indexable inserts; compatibility is specified for BOMT 1304 and matching Ingersoll inserts in the S850TM holder. How is the insert secured in the holder? Insert clamping is achieved with a Torx screw (M3.5x8.5) tightened using a T10 key to ensure repeatable seating and reliable clamping force for the S850TM. Which shank diameter is required for the toolholder? The tool is manufactured with a 20 mm shank diameter and is intended for holders that accept a 20 mm shank. Is the S850TM suitable for heavy-duty milling? The S850TM combines a 20 mm shank and a 40 mm effective cutting length with a two-flute geometry; this provides a balance of rigidity and chip evacuation suitable for many medium to heavy steel milling tasks. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Milling Cutter For RDMT 1003 Indexable Inserts, 2 Flutes 55mm Cutting Length - Teknik Makina
Take advantage of a robust, insert-based milling system that combines stable clamping and efficient chip removal for predictable cycle times. The tool’s 20 mm shank and 55 mm effective cutting length deliver steady rigidity and cutting capacity, while compatibility with RDMT 1003 indexable inserts reduces tool change downtime — order directly via Metav Werkzeuge or consult the specialists for application support. Shank cutter for RDMT 1003 indexable inserts — 20 mm shank · 2 flutes · Teknik Makina The shank cutter for RDMT 1003 indexable inserts is a precision milling tool designed for high-feed operations on CNC milling centres and machining stations. Insert-compatible RDMT 1003 system 20 mm shank for stable clamping 55 mm effective cutting length Two cutting edges for high feed rates Increased productivity through insert-based milling The insert-based design provides a clear productivity advantage: the ability to change cutting edges rapidly without removing the tool body reduces machine downtime and improves overall equipment effectiveness. With a 20 mm shank and 2 flutes, the cutter offers a balance between rigidity and chip evacuation, enabling higher feed per tooth while maintaining tool life. The measured 55 mm effective cutting length supports longer axial engagements, so fewer tool changes are required during batch runs. Secure clamping and predictable run-out for precise finishing A defined clamping diameter and solid mechanical fixing ensure consistent concentricity and low run-out, which is crucial when working to tight tolerances. The tool uses an M3.5 locking screw and a M3.5x8.5 Torx screw tightened with a T15 key, delivering reliable insert retention and repeatable seating. The resulting stability translates into improved surface finish and dimensional control, particularly on small- to medium-diameter features where vibration must be minimised. Low-maintenance handling and serviceability The modular nature of the insert system simplifies maintenance: worn inserts are replaced quickly, while the holder remains in service, reducing inventory costs for spare tools. At only 0.265 kg and with a total length of 120 mm, the cutter is light enough for efficient tool changes yet substantial enough to resist deflection during heavier cuts. Clear specifications for screw sizes and the Torx key help workshop technicians perform fast, correct servicing without guesswork. Application scope and material guidance Designed for use with RDMT 1003 indexable inserts, this shank cutter suits a range of milling tasks where consistent geometry and throughput are priorities. The two-flute geometry promotes effective chip flow at elevated feed rates, making the tool well suited to semi-finishing and finishing operations on common engineering materials. For specific material allowances and cutting data, pairing the cutter with the appropriate insert grade will determine final performance and surface quality. For tailored tooling advice or to request application data for Teknik Makina shank cutters, contact Metav Werkzeuge — our consultants will provide machining recommendations and availability from Emmerich stock Technical data Article number: R190TM Manufacturer: Teknik Makina Product designation: Shank cutter for RDMT 1003 indexable inserts EClass: 21180806 ETIM: EC011860 Shank diameter: 20 mm Effective cutting length: 55 mm Total length: 120 mm Diameter: 20 mm Cutting edges: 2 Weight: 0.265 kg Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 Compatible with RDMT 1003 indexable inserts Files (illustrations/specs): 62de7e4e33927e49dbf32747, 62de7ee4bd24461b3d5f7a6e Shop title and description available for reference SKU/UID: R190TM FAQ What insert type does this cutter accept? The shank cutter accepts RDMT 1003 indexable inserts; compatibility is central to the tool’s modular design and quick-change workflow. Which clamping and tool-retention parts are required for servicing? Servicing requires the M3.5 locking screw and M3.5x8.5 Torx screw; a T15 Torx key is used for correct tightening on the Teknik Makina shank cutter (SKU R190TM). What are the key dimensions to check before mounting? Confirm the 20 mm shank diameter, 55 mm effective cutting length and 120 mm total length to ensure correct holder fit and sufficient stick-out for the intended operation. Is the cutter suitable for high-feed milling? Yes. The two-flute geometry and insert system support elevated feed rates when combined with appropriate insert grades and machining parameters for the material. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Milling Cutter For RDMT 1003 Indexable Inserts, 2 Flutes 80mm Cutting Length - Teknik Makina
Take advantage of a robust combination of precise dimensions and straightforward maintenance: a 20 mm shank and 80 mm cutting length deliver stable milling and long engagement for consistent chip evacuation. Order the tool directly via Metav Werkzeuge or consult our specialists for application advice. R210TM Shank Milling Cutter (Teknik Makina) — 20 mm shank for RDMT 1003 indexable inserts, 2 cutting edges A R210TM shank milling cutter engineered as a secure holder for RDMT 1003 indexable inserts, intended for reliable material removal in milling operations 20 mm shank diameter 80 mm cutting length For RDMT 1003 indexable inserts Two cutting edges for efficient cutting Faster machining with indexable inserts and long engagement The combination of a 20 mm shank and an 80 mm cutting length provides a stable connection and extended contact with the workpiece, which helps to reduce vibration and improve surface finish. Using indexable inserts means interrupted edge refreshes can be completed quickly, reducing downtime. The design supports repeatable insert seating, allowing the cutter body to retain alignment after insert changes so cycle times remain predictable and production flow stays efficient. Secure clamping and straightforward insert replacement Insert retention is engineered for reliable operation: the insert is clamped by an M3.5 locking screw, fixed with an M3.5x8.5 Torx screw, and tightened using a T15 Torx key. This familiar hardware ensures concise torque application and repeatable seating geometry. The result is a toolholder that simplifies maintenance routines — fewer steps are required to replace cutting edges, which supports quick tool changes on the shop floor and reduces non-productive time. Designed for workshop integration and consistent handling With an overall length of 200 mm and a mass of 0.477 kg, the cutter balances accessibility and handling comfort when loading into toolholders or machines. The modest weight aids manual handling during set-up, while the defined overall dimensions make the component easy to program into tooling lists and tool magazines. Clear dimensional data supports planning and inventory management for production environments where predictable tool characteristics are essential. Reliability that supports production standards The tool body is specified for RDMT 1003 inserts, offering straightforward compatibility with common insert geometries and grades. The two cutting edges focus on efficient chip removal and predictable forces during milling, which can ease clamping requirements and contribute to process stability. Regular checks of the locking screw and torque settings maintain performance and ensure the cutter continues to meet machining expectations over repeated insert changes. Contact Metav Werkzeuge today for tailored application advice and secure procurement of the Teknik Makina R210TM shank milling cutter — our Emmerich team provides local stock verification and technical guidance to support reliable integration into production Technical data Article number: R210TM Manufacturer: Teknik Makina Product name: R210TM shank milling cutter for RDMT 1003 indexable inserts Core measurements Shank diameter: 20 mm Cutting length (shank): 80 mm Total length: 200 mm Number of cutting edges: 2 Weight: 0.477 kg Features and fastening Compatible with RDMT 1003 indexable inserts Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key size: T15 FAQ Which inserts fit this cutter? The cutter accepts RDMT 1003 indexable inserts; the geometry and pocket are designed for those specific inserts to ensure correct seating and cutting performance with the R210TM shank milling cutter from Teknik Makina. How is the insert secured in the tool? An M3.5 locking screw in combination with an M3.5x8.5 Torx screw secures the insert; tightening is performed with a T15 Torx key to achieve repeatable clamping and correct seating. What are the key dimensions to check for machine compatibility? Important dimensions are the 20 mm shank diameter, 80 mm cutting length, and 200 mm total length; these values define holder fit, projection and tool magazine planning for the R210TM (Teknik Makina). Is the tool weight significant for handling or balancing? The tool weight of 0.477 kg is modest and assists manual handling during set-up; balance considerations for high-speed spindles should be reviewed with actual machine and holder combinations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Schaftfräser für APKT 1003 L150mm mit Innenkühlung, 3 Schneiden - Teknik Makina
Schaftfräser – Schaftfräser für APKT 1003 Wendeplatten von Teknik Makina Schaftfräser für APKT 1003 Wendeplatten mit 20 mm Schaft und integrierter Innenkühlung für effiziente Serienzerspanung 20 mm Schaftdurchmesser, präzise Spannungsaufnahme Innenkühlung für längere Standzeit Kompatibel mit APKT 1003 Wendeplatten von Korloy Drei Schneiden für ruhigen Lauf Schaftlänge Schneide 60 mm für tiefe Eingriffe Mehr Leistung durch gezielte Innenkühlung Der Schaftfräser nutzt eine integrierte Innenkühlung, die Kühlschmierstoff direkt an die Schneidkante führt und so das Spanverhalten verbessert. Diese Kühlmittelzufuhr reduziert thermische Belastung und sorgt für gleichmäßige Schneidbedingungen, was die Standzeit der Wendeplatten erhöht und Ausschuss verringert. Besonders bei unterbrochenem Schnitt oder tiefen Eingriffen zeigt sich der Nutzen der direkt geführten Kühlung. Präzision und Laufruhe für Serienprozesse Mit 20 mm Schaftdurchmesser und drei präzise geschliffenen Schneiden bietet das Werkzeug stabile Schnittbedingungen und reduziert Vibrationen. Die ruhige Schnittcharakteristik ermöglicht höhere Schnittgeschwindigkeiten bei gleichbleibender Maßhaltigkeit, was die Produktivität in der Serienfertigung steigert. Die Kombination aus steifer Schaftaufnahme und ausgewogener Geometrie verbessert die Wiederholgenauigkeit. Kompatibilität, Befestigung und schnelle Montage Das Werkzeug ist ausgelegt für APKT 1003 Indexable Inserts und eignet sich speziell für Wendeplatten von Korloy, was die Auswahl von Ersatzteilen vereinfacht. Die Befestigung erfolgt mit der mitgelieferten Torx Schraube M2,5x5,5 und wird mit einem Torx Schlüssel T8 montiert, sodass der Wechsel der Platten schnell und sicher vonstattengeht. Die klar definierte Schraubverbindung minimiert Montagefehler und Stillstandzeiten. Einsatzbereiche und wirtschaftlicher Nutzen Der Schaftfräser ist auf effiziente Zerspanung von Standardwerkstoffen ausgelegt und eignet sich für Anwendungen mit mittleren bis hohen Schnittparametern. Durch die Kombination aus Innenkühlung und stabiler Geometrie kann Material spanend bearbeitet werden, während die Werkzeugstandzeit steigt und Rüstzeiten sinken. Diese Effizienz wirkt sich direkt auf die Fertigungskosten und die Prozesssicherheit aus. Empfehlung: Bestellen Sie den Schaftfräser direkt über Metav Werkzeuge oder fordern Sie technische Beratung an – eMail: info@metav-werkzeuge.com · Telefon: +49 2822 7131930 Produktmerkmale Bezeichnung: Schaftfräser für APKT 1003 Wendeplatten SKU: S176-1TM Marke: Teknik Makina Produktart: Schaftfräser Fakten Durchmesser: 20 mm Gesamtlänge: 150 mm Schaftdurchmesser: 20 mm Schaftlänge Schneide: 60 mm Schneiden: 3 Gewicht: 0,345 kg Besonderheiten Innenkühlung Passend für Wendeplatten: APKT 1003 Passend für Wendeplatten Hersteller: Korloy Torx Schlüssel: T8 (zum Wechseln der Schrauben) Torx Schraube: M2,5x5,5 (Befestigung der Wendeplatten) FAQ Wie erfolgt die Befestigung der Wendeplatten? Die Befestigung der Wendeplatten erfolgt mit der Torx Schraube M2,5x5,5; der Wechsel wird mit dem Torx Schlüssel T8 durchgeführt. Der Schaftfräser von Teknik Makina (SKU S176-1TM) nutzt diese standardisierte Verbindung für sicheren Sitz. Für welche Wendeplatten ist das Werkzeug geeignet? Das Werkzeug ist für APKT 1003 Indexable Inserts ausgelegt und wurde kompatibel zu Wendeplatten von Korloy konstruiert, was die Teilebeschaffung vereinfacht. Welche Vorteile bringt die Innenkühlung in der Praxis? Die Innenkühlung führt Kühlschmierstoff direkt an die Schneidkante, reduziert Wärmeentwicklung und verbessert das Spanfließen, sodass die Standzeit der Wendeplatten steigt und Nachbearbeitung reduziert wird. Eignet sich das Werkzeug für Serienfertigung? Ja, der Schaftfräser von Teknik Makina ist durch seine steife Auslegung, den ruhigen Lauf mit drei Schneiden und die Innenkühlung speziell für produktive Serienprozesse ausgelegt. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Schaftfräser für RPMT 0803 Wendeplatten L250mm mit Innenkühlung, Torx M3x7 Schraube T8 - Teknik Makina
Schaftfräser für RPMT 0803 Wendeplatten Der Schaftfräser mit 20 mm Schaft und interner Kühlung ermöglicht präzise und stabile Fräsoperationen mit RPMT 0803 Wendeplatten für anspruchsvolle Metallbearbeitung. 20 mm Schaft für stabile Spanntoleranzen Innenkühlung für längere Standzeit 250 mm Gesamtlänge für tiefe Eingriffe 3 Schneiden für feine Spanbildung Kompatibel mit RPMT 0803 Wendeplatten von Korloy Hohe Prozesssicherheit durch gezielte Kühlung und Steifigkeit Die integrierte Innenkühlung führt das Kühlmittel direkt an die Schneidkante und reduziert so thermische Belastungen sowie Materialanhaftungen. Das Ergebnis ist eine spürbar höhere Standzeit der Wendeplatten und gleichbleibende Schnittqualität über lange Werkzeuglaufzeiten. In Kombination mit dem 20 mm Schaft bleibt die Steifigkeit des Systems erhalten, wodurch Vibrationen minimiert und Oberflächenrauheiten reduziert werden. Präzise Zubehöraufnahme und wartungsfreundliche Verschraubung Mit dem Einsatz von RPMT 0803 Wendeplatten und der dafür vorgesehenen Verschraubung lässt sich die Schneidenaufnahme schnell und sicher wechseln. Die Montage erfolgt mittels Torx Schraube M3x7 und wird mit dem mitgegebenen Torx Schlüssel T8 zuverlässig angezogen, was wiederholbare Montagebedingungen schafft. Die drei Schneiden sorgen für gleichmäßige Spanabfuhr und reduzieren Schnittkräfte, was die Bearbeitungsgenauigkeit erhöht. Wirtschaftlicher Einsatz und operativer Nutzen im Fertigungsalltag Die Gesamtlänge von 250 mm bietet erhöhten Arbeitsbereich für tiefe Taschen und Langnuten, ohne dass die Standzeit darunter leidet. Durch die Kombination aus Innenkühlung und optimierter Schneidengeometrie wird die Produktivität gesteigert und Stillstandzeiten sinken. Metav unterstützt die Beschaffung und liefert das Werkzeug zuverlässig an die Werkbank; bei Bedarf stehen technische Rückfragen per eMail oder Telefon zur Verfügung, um die Integration in bestehende Prozesse zu erleichtern. Empfehlung: Für präzise Tiefenfräsungen mit RPMT 0803 Wendeplatten ist der Schaftfräser von Teknik Makina die wirtschaftliche Wahl; bei Fragen und individueller Beratung erreichen Sie Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: R312-2TM Marke: Teknik Makina Produktart: Schaftfräser Bezeichnung: Schaftfräser für RPMT 0803 Wendeplatten Daten Durchmesser: 20 mm Gesamtlänge: 250 mm Schaftdurchmesser: 20 mm Schaftlänge Schneide: 40 mm Schneiden: 3 Besonderheiten Innenkühlung: ja (Kühlmittelzufuhr intern) Kompatibel mit: RPMT 0803 Wendeplatten Passend für Hersteller: Korloy Torx Schlüssel: T8 (zum Anziehen der Torx Schraube) Torx Schraube: M3x7 (Schneidplattenbefestigung) SKU: R312-2TM FAQ Welche Wendeplatten passen auf das Werkzeug? Der Schaftfräser von Teknik Makina ist für RPMT 0803 Wendeplatten ausgelegt und kompatibel mit Platten des Herstellers Korloy; SKU R312-2TM bezeichnet dieses Modell. Wie wird die Schneide befestigt? Die Schneide wird mit einer Torx Schraube M3x7 fixiert; zum Anziehen wird ein Torx Schlüssel T8 verwendet, was wiederholbare Montagebedingungen ermöglicht. Eignet sich das Werkzeug für tiefe Taschenfräsungen? Ja, die Gesamtlänge von 250 mm macht das Modell R312-2TM besonders geeignet für tiefere Eingriffe und längere Auskragungen bei gleichbleibender Präzision. Welchen Vorteil bietet die Innenkühlung praktisch? Die Innenkühlung des Schaftfräsers reduziert thermische Belastung an der Schneidkante, erhöht die Standzeit der Wendeplatten und verbessert die Oberflächenqualität bei anspruchsvoller Zerspanung. Wer liefert und berät bei technischen Fragen? Metav Werkzeuge unterstützt bei der Auswahl und liefert das Modell R312-2TM; technische Rückfragen werden per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 beantwortet. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Schaftfräser für XNKU 06T3, L110mm Innenkühlung, 3 Schneiden, Schaftdurchm. 20mm, Torx T8 - Teknik Makina
Schaftfräser für XNKU 06T3 Wendeplatten (S779TM) Der Schaftfräser von Teknik Makina ist ein präzisionsorientiertes Fräswerkzeug mit Innenkühlung, ausgelegt für die Verwendung von XNKU 06T3 Wendeplatten bei anspruchsvollen Zerspanaufgaben. *Schaftfräser »S779TM« von Teknik Makina *20 mm Schaftdurchmesser für stabile Führung *Innenkühlung für optimierte Spanabfuhr *Drei Schneiden für hohe Zerspanleistung *Kompatibel mit Palbit XNKU 06T3 Wendeplatten Profitieren Sie von der Kombination aus stabiler Führung durch den 20 mm Schaftdurchmesser, effizienter Spanabfuhr dank Innenkühlung und konstanter Zerspanleistung durch Drei Schneiden; das Werkzeug eignet sich speziell für Palbit Wendeplatten vom Typ XNKU 06T3 und kann über Metav Werkzeuge angefragt werden. Effiziente Leistung für Serienfräsungen und Economy Der Schaftfräser wurde für produktive Fertigungsprozesse entwickelt und bietet durch den 20 mm Schaftdurchmesser eine hohe Formstabilität, die Vibrationen reduziert und Oberflächenqualität verbessert. Die Auslegung mit Drei Schneiden sorgt für gleichmäßige Spanbildung und erlaubt höhere Vorschübe bei gleichzeitig stabiler Bearbeitung. Für Anwender bedeutet das geringere Stillstandzeiten und ein besseres Kosten-Nutzen-Verhältnis in der Serienfertigung. Innenkühlung: Kühlung, Standzeit und Prozesssicherheit Die integrierte Innenkühlung führt Kühlschmierstoff direkt an die Spanzone und reduziert thermische Belastung an Schneidkante und Wendeplatte. Das Ergebnis ist ein stabilerer Verschleißverlauf, verlängerte Standzeiten und weniger thermisch bedingte Maßänderungen am Bauteil. Besonders bei anspruchsvollen Legierungen und bei höheren Schnittparametern trägt die Innenkühlung zur Prozesssicherheit und Wiederholgenauigkeit bei. Kompatibilität und Einsatzgebiete Das Werkzeug ist kompatibel mit XNKU 06T3 Wendeplatten und wurde speziell auf die Geometrie dieser Plattengeneration abgestimmt. Durch die Eignung für Palbit Wendeplatten lassen sich bestehende Plattenqualitäten nutzen, was Umrüstzeiten minimiert. Typische Einsatzfelder sind konturgenaue Schlicht- und Planfräsungen sowie produktive Rohbearbeitungen, bei denen stabile Werkstückaufspannung und konstante Schnittbedingungen vorliegen. Handhabung, Wechsel und Wartung Der Plattenwechsel erfolgt mit der angegebenen Torx Schraube M2,5x5,5; zum Lösen und Anziehen empfiehlt sich der passende Torx Schlüssel T8. Regelmäßige Kontrolle der Schraubenmomentierung und Sichtprüfung der Platten erhöht die Betriebssicherheit. Das modular aufgebaute Konzept erleichtert den Austausch verschlissener Wendeplatten und reduziert Rüstzeiten in der Werkstatt. Empfehlung: Für präzise, produktive Fräsprozesse den Schaftfräser von Teknik Makina mit Innenkühlung über Metav Werkzeuge anfragen – Technische Beratung: info@metav-werkzeuge.com, Tel. +49 2822 7131930 Produktmerkmale Artikelnummer: S779TM Bezeichnung: Schaftfräser für XNKU 06T3 Wendeplatten Produktart: Schaftfräser Hersteller: Teknik Makina Fakten Durchmesser: 20 mm Gesamtlänge: 110 mm Schaftdurchmesser: 20 mm Schaftlänge Schneide: 60 mm Schneiden: 3 Gewicht: 0.214 kg Besonderheiten Innenkühlung Passend für Wendeplatten: XNKU 06T3 Passend für Wendeplatten Hersteller: Palbit Torx Schlüssel: T8 (zum Wechseln der Schraube) Torx Schraube: M2,5x5,5 (Befestigung der Wendeplatten) FAQ Für welche Wendeplatten ist der Fräser geeignet? Der Schaftfräser ist für XNKU 06T3 Wendeplatten ausgelegt und passt besonders zu Platten der Serie von Palbit; im Lieferumfang sind die passenden Befestigungselemente zu beachten. Welche Vorteile bietet die Innenkühlung konkret? Die Innenkühlung reduziert Hitzeeintrag an der Schneidkante, verbessert die Spanabfuhr und verlängert die Standzeit der Wendeplatten beim Schaftfräser S779TM von Teknik Makina. Welche Schraube und welches Werkzeug werden für den Plattenwechsel benötigt? Für den Wechsel wird eine Torx Schraube M2,5x5,5 verwendet; zum Lösen und Anziehen empfiehlt sich der Torx Schlüssel T8. Für welche Bearbeitungen ist der Fräser besonders geeignet? Der Fräser eignet sich für produktive Schlicht- und Planfräsungen sowie für Rohbearbeitungen, bei denen stabile Führung und konstante Schnittbedingungen gefordert sind. Wie viele Schneiden hat der Fräser und welchen Nutzen bringen sie? Der Fräser verfügt über Drei Schneiden, was eine gleichmäßige Spanbildung ermöglicht und die Vorschubleistung bei guter Oberflächenqualität erhöht. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Schaftfräser LNMX 1006 L120mm mit Innenkühlung, Torx M3x7 Schraube - Teknik Makina
Schaftfräser für LNMX 1006 Wendeplatten Der Schaftfräser eignet sich für die Aufnahme von LNMX 1006 Wendeplatten und überzeugt durch Innenkühlung und stabile 20 mm Schaftaufnahme für produktive Zerspanungsprozesse. Innenkühlung sorgt für konstante Spanabfuhr Passend für Korloy LNMX 1006 Wendeplatten 20 mm Schaftdurchmesser für stabile Werkzeugaufnahme Drei Schneiden ermöglichen hohe Oberflächenqualität Präzise Schnittführung für effiziente Serienbearbeitung Der Schaftfräser wurde für das Einsetzen von Indexplatten der Bauform LNMX 1006 entwickelt und bietet dadurch schnelle Bestückung und konsequent reproduzierbare Schnitte. Die Kombination aus 20 mm Schaftdurchmesser und einer Gesamtlänge von 120 mm gewährleistet eine ruhige Laufruhe in Maschinen mit standardisierten Spannfuttern. Das Ergebnis ist eine höhere Prozesseffizienz, weil Rüstzeiten reduziert und Maßhaltigkeit über mehrere Teile hinweg stabilisiert werden. Innenkühlung verlängert Standzeiten und verbessert Spankontrolle Dank integrierter Innenkühlung wird Kühlmittel direkt an die Schnittzone geführt, was die Temperaturspitzen senkt und die Spanabfuhr optimiert. Dadurch reduziert sich der Verschleiß an Schneidkanten, und die Zyklen zwischen Nachschleifen oder Plattenwechseln werden länger. Für Anwender bedeutet das weniger Maschinenstillstand und niedrigere Stückkosten ohne Abstriche bei Oberflächenqualität oder Vorschub. Einfache Integration in bestehende Plattensysteme Der Fräser ist speziell kompatibel mit Wendeplatten des Herstellers Korloy in der Ausführung LNMX 1006, wodurch ein direkter Austausch in bestehenden Werkzeugkonzepten möglich ist. Die drei Schneiden sind auf konstante Schnittkräfte ausgelegt und eignen sich für vielseitige Zerspanungsaufgaben. Technische Anwender profitieren von klarer Plattenidentifikation und einfacher Lagerhaltung, weil gängige Plattentypen verwendet werden. Montage, Handhabung und Wartung schnell ausführbar Der Austausch der Wendeplatten erfolgt mit handelsüblichen Befestigungsmitteln; die Befestigung nutzt eine Torx Schraube M3x7, die mit einem Torx Schlüssel T8 sicher angezogen wird. Die übersichtliche Konstruktion erlaubt schnellen Plattenwechsel und erleichtert die Instandhaltung direkt an der Maschine. Hinweise zur korrekten Anzugsmomentierung und zur Kühlmittelzufuhr helfen, die Lebensdauer der Schneidkanten auszuschöpfen. Für präzise, wirtschaftliche Zerspanung empfehlen wir den Schaftfräser von Teknik Makina mit Innenkühlung und Korloy-LNMX-1006-Kompatibilität; bei Fragen berät Metav Werkzeuge GmbH persönlich unter info@metav-werkzeuge.com oder +49 2822 7131930 Produktmerkmale Artikelnummer: LN100-1TM Bezeichnung: Schaftfräser für LNMX 1006 Wendeplatten Marke: Teknik Makina Produktart: Schaftfräser Fakten Durchmesser: 20 mm Gesamtlänge: 120 mm Schaftdurchmesser: 20 mm Schaftlänge Schneide: 25 mm Anzahl Schneiden: 3 Gewicht: 0.285 kg Besonderheiten Innenkühlung: Ja Passend für Wendeplattenhersteller: Korloy Wendeplatten: LNMX 1006 Torx Schlüssel: T8 Torx Schraube: M3x7 FAQ Welche Wendeplatten passen auf den Schaftfräser? Der Schaftfräser ist ausgelegt für LNMX 1006 Wendeplatten und wurde für die Verwendung mit Platten von Korloy entwickelt, was die Kompatibilität und einfache Bestückung sicherstellt. Wie wirkt sich die Innenkühlung auf die Standzeit aus? Die integrierte Innenkühlung reduziert Temperaturspitzen an der Schneidkante und verbessert die Spanabfuhr, wodurch die Standzeit der Wendeplatten beim Schaftfräser merklich verlängert wird. Welche Schrauben und Schlüssel werden für den Plattenwechsel benötigt? Für den Wechsel der Wendeplatten werden Torx Schraube M3x7 und Torx Schlüssel T8 verwendet; diese Kombination erlaubt sicheren und reproduzierbaren Zusammenbau. Ist der Schaftfräser für lange Überstände geeignet? Die Kombination aus 20 mm Schaftdurchmesser und 120 mm Gesamtlänge bietet eine gute Balance aus Reichweite und Stabilität, empfohlen wird jedoch auf Maschinensteifigkeit und passende Spannfutter zu achten. Welche Vorteile bietet der Schaftfräser für die Serienproduktion? Der Schaftfräser ermöglicht schnellen Plattenwechsel, konstante Schnittbedingungen und reduzierte Stillstandszeiten durch Innenkühlung, was die Wirtschaftlichkeit in Serienprozessen erhöht. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Shaft Milling Cutter for AXMT 0602 and APKT 0903 Indexable Inserts, 60mm Cutting Length - Teknik Makina
Take advantage of a compact, indexable solution that combines proven compatibility with AXMT 0602 and APKT 0903 inserts, a robust Ø20 mm shaft and a 60 mm effective cutting length for reliable milling performance — order via Metav Werkzeuge or contact our consultants for technical advice. Shaft milling cutter S022TM — indexable inserts AXMT 0602 / APKT 0903, Ø20 mm (Teknik Makina) A Shaft milling cutter S022TM designed for indexable-insert milling with AXMT 0602 and APKT 0903 inserts, suitable for a wide range of general machining operations Compatible with AXMT 0602 & APKT 0903 inserts Ø20 mm shaft for standard toolholders 60 mm effective cutting length Secured by M2.5x5.5 Torx screw (T8) Precision and compatibility that reduce setup time The S022TM is engineered as an indexable-insert milling solution that accepts AXMT 0602 and APKT 0903 styles, simplifying inventory management by using widely available insert geometries. With a Ø20 mm shaft and a total length of 150 mm, the holder provides a compact, rigid connection to standard toolholders; the 60 mm cutting length allows extended engagement without compromising stiffness. The design utilises a Torx clamping screw M2.5x5.5 (Torx key T8) for reproducible insert retention, which contributes to consistent tool runout and predictable component quality. These objective specifications support efficient machine cycles and predictable tool-change intervals. Stable cutting performance and operational benefits Equipped with three cutting edges, the tool body balances chip load and cutting forces to enable higher feed rates in many indexable milling tasks. The combination of a short overhang and the measured mass (approx. 0.37 kg) reduces vibration potential, improving surface finish and extending insert life. The secure screw fastening and standard insert interfaces make insert replacement quick and safe, reducing downtime and logistical complexity. In practical terms, the holder's geometry and fastening method translate into fewer interruptions on the shopfloor and a more reliable production rhythm. Practical procurement and workshop integration The design focuses on maintenance friendliness and workshop compatibility: common APKT 0903 inserts (also compatible with Taegutec inserts) are easy to source, and the standard shaft size ensures broad clamping options. For purchasing and supply, Metav Werkzeuge acts as a quality filter for the European market from Emmerich, offering robust logistics and industry-grade fulfilment. As a compact, purpose-built milling holder, it supports repeatable setups and straightforward spare-part planning, helping to lower process risk and maintain throughput. Contact Metav Werkzeuge for availability and tailored technical advice on Teknik Makina's S022TM shaft milling cutter and to ensure seamless integration into existing toolsets Technical data SKU: S022TM Brand: Teknik Makina Suitable for indexable inserts: AXMT 0602, APKT 0903 Compatible insert manufacturer: Taegutec Torx screw: M2.5x5.5 Torx key: T8 Core data Shaft diameter: 20 mm Effective cutting length: 60 mm Overall length: 150 mm Number of cutting edges: 3 Weight: 0.37 kg Design & special features Indexable-insert holder configuration Secured by Torx screw for reproducible clamping Fits standard toolholders with Ø20 mm shank SKU S022TM FAQ Which insert types fit this milling holder? The S022TM accepts AXMT 0602 and APKT 0903 indexable inserts; it is also compatible with inserts from Taegutec that follow these ISO forms. How many cutting edges does the tool body provide? This milling holder is designed for three cutting edges, which helps balance chip load and supports higher productive feeds. What are the key dimensions to check before ordering? Check the Ø20 mm shaft diameter, the 60 mm effective cutting length and the overall length of 150 mm to ensure compatibility with existing toolholders. Which screw and key are used to retain the insert? The insert is secured with an M2.5x5.5 Torx screw; a T8 Torx key is required for tightening and removal. Is this tool suitable for standard toolholders? Yes — the 20 mm shank and compact overall length make the holder compatible with many standard clamping systems used in milling machines. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Shank Cutter For ADMT 1204 Indexable Inserts, 90° Cutting Angle, 55mm Cutter Length - Teknik Makina
Combine robust clamping and quick insert changes with the S500TM for continuous production: the 20 mm shank and 55 mm cutting length deliver rigidity and reach, while indexable ADMT 1204 inserts reduce downtime. Order the cutter directly via Metav Werkzeuge or consult the technical team for tailored machining advice. Shank milling cutter S500TM by Teknik Makina — for ADMT 1204 indexable inserts, 20 mm shank Shank milling cutter S500TM designed for reliable indexable-insert milling in industrial applications Compatible with ADMT 1204 inserts 20 mm shank diameter 55 mm cutting length Secured by M3x7 Torx screw, T8 key Increased uptime through indexable inserts and fast changeovers The S500TM is built for production environments where tool change time directly affects output. By accepting ADMT 1204 indexable inserts, the cutter enables rapid repositioning or replacement of cutting edges without removing the holder from the spindle, reducing non-productive time. The use of replaceable inserts means less frequent full-tool replacement and a predictable cost structure per cutting edge. With 2 cutting edges and a 90° cutting angle, the system is optimised for stable material removal and consistent surface results, supporting higher throughput on batch and single-piece production alike. Rigidity and reach for consistent chip control A firm connection between toolholder and spindle improves surface finish and tool life. The 20 mm shank provides a compact, rigid interface for secure clamping, helping to reduce chatter when taking moderate depths of cut. Combined with the 55 mm cutting length, the geometry offers a good balance between working reach and stiffness for peripheral and shoulder milling tasks. The cutter’s modest mass (0.348 kg) aids spindle balance and reduces dynamic load on high-speed setups, while the M3x7 Torx fastening, used with a T8 key, ensures reliable insert retention and straightforward maintenance. Compatibility and workshop integration This tool integrates into established machining workflows: it is designed for ADMT 1204 inserts and listed as compatible with Walter insert systems, allowing straightforward stocking and replacement strategies. The indexable concept suits mixed-production shops and OEMs that require flexibility across materials and part geometries. Technical consultants can advise on optimal insert grades and cutting parameters for specific steels or aluminium alloys, helping to translate the cutter’s technical attributes into measurable productivity gains on the shop floor. For tailored cutting recommendations or delivery options for the Teknik Makina S500TM, contact Metav Werkzeuge in Emmerich for expert technical guidance and rapid supply: phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: S500TM Manufacturer: Teknik Makina Designation: Shank milling cutter for ADMT 1204 indexable inserts eClass: 21180806 ETIM: EC011860 Core specifications Shank diameter: 20 mm Cutting length (shank): 55 mm Overall length: 150 mm Diameter: 20 mm Cutting edges: 2 Cutting angle: 90° Weight: 0.348 kg Special features For indexable inserts: ADMT 1204 Compatible insert manufacturer: Walter Torx screw: M3x7 Torx key: T8 FAQ Which inserts fit this cutter? The cutter accepts ADMT 1204 indexable inserts; the S500TM is specified for these insert geometries and is compatible with Walter-manufactured inserts. How is the insert secured? Inserts on the S500TM are fastened with an M3x7 Torx screw; use a T8 key for correct tightening and replacement. What are the shank and cutting dimensions? The S500TM features a 20 mm shank diameter, a 55 mm cutting length, and an overall length of 150 mm as core dimensions. For which operations is this cutter suitable? The indexable design makes the S500TM suitable for peripheral and shoulder milling where a 90° cutting angle and replaceable edges support efficient material removal and predictable edge life. Is the tool balanced for high-speed spindles? With a compact mass of 0.348 kg and a short shank profile, the S500TM provides a balance-friendly solution for many machining setups; specific balancing requirements depend on spindle speed and machine specification. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Shank Cutter for ADMT 1204 Indexable Inserts, 90° Cutting Angle, 60mm Cutting Length - Teknik Makina
Take advantage of precise indexable-insert milling combined with stable clamping and straightforward servicing for consistent workshop throughput; order supply and technical advice through Metav Werkzeuge for seamless integration into production. Shank milling cutter S501TM — 20 mm shank, for ADMT 1204 indexable inserts (Teknik Makina) The Shank milling cutter S501TM is a robust shank-mounted milling tool intended for operations with ADMT 1204 indexable inserts, designed to deliver repeatable chip control and fast insert changes in industrial machining environments 20 mm shank diameter For ADMT 1204 indexable inserts 60 mm effective cutting length Secured with M3x7 Torx screw (T8) High-efficiency indexable milling for predictable output The S501TM is engineered as an indexable-insert milling solution that combines replaceable cutting edges with a compact shank form. With a 20 mm shank and a 60 mm cutting length, the tool provides a predictable contact zone that supports consistent material removal rates and easier tool set-up. Using replaceable ADMT 1204 inserts reduces overall tooling cost and shortens maintenance downtime compared with solid-end alternatives; insert indexing allows the cutting edge to be renewed in seconds, maintaining process stability on repetitive runs. Secure clamping and quick insert changes for stable machining A stable clamping system reduces vibration and extends insert life. The tool uses an M3x7 Torx screw (drive size T8) to fasten the insert pocket reliably, ensuring repeatable seating and torque values across tool changes. The combination of a 20 mm shaft and a 200 mm overall length keeps the center of mass close to the spindle, enhancing rigidity during slotting or light facing. For production environments where machine time is valuable, this translates into fewer reworks and a steadier surface finish from one batch to the next. Practical versatility for common milling tasks Designed around standard ADMT 1204 geometries and approved for use with Walter inserts, the cutter is suited to general milling operations where indexable inserts are preferred: intermittent cutting, slotting and light face milling are typical applications. The two-edge configuration and 90° cutting angle deliver predictable chip evacuation and straightforward programming for CAM routines. Where operators require an uncomplicated, repeatable toolset, this type of shank-mounted cutter supports consistent cycle times and straightforward supply-chain management. Maintenance, integration and predictable cost-efficiency Replacement inserts simplify inventory control and lower the total cost of ownership when measured across lifetime cutting hours. The S501TM’s design supports rapid on-machine insert replacement, cutting non-productive time and preserving spindle availability. Combined with Metav’s supply and quality filter in Emmerich, customers benefit from a dependable sourcing route that complements in-house tool management practices and reduces the risk of mismatched specifications in serial production. For procurement or technical integration, contact Metav Werkzeuge in Emmerich for detailed advice and reliable supply — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the S501TM and its compatibility with existing tool holders Technical data Article number: S501TM Manufacturer: Teknik Makina For inserts: ADMT 1204 Compatible insert manufacturer: Walter Torx screw: M3x7 Torx key: T8 Facts Shank diameter: 20 mm Cutting diameter: 20 mm Effective cutting length: 60 mm Total length: 200 mm Number of cutting edges: 2 Weight: 0.498 kg Cutting angle: 90° Special features For ADMT 1204 indexable inserts Secured with M3x7 Torx screw Compatible with Walter inserts Brand: Teknik Makina FAQ What inserts are compatible with this cutter? The S501TM shank milling cutter accepts ADMT 1204 indexable inserts; insert geometry must match ADMT 1204 specifications for secure seating and correct cutting geometry. How is the insert fixed in the pocket? Inserts are clamped with an M3x7 Torx screw and require a T8 driver; this arrangement ensures consistent torque and repeatable seating for the S501TM. Which operations suit this shank-mounted cutter? Typical uses include slotting, light face milling and intermittent cuts where an indexable-insert approach is preferred; the two-edge layout and 90° cutting angle give predictable chip control. Is the tool suitable for production environments? Yes — the S501TM is designed for repeatable performance and quick insert replacement, making it appropriate for series production where uptime and consistent output are priorities. Manufacturer/Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Shank Cutter For ADMX 0702 Indexable Inserts, 5 Flutes 17mm Cutting Length, 90° - Teknik Makina
Benefit from a compact solution that pairs reliable indexable inserts with a sturdy Ø 20 mm shank and five cutting edges for consistent machining results; order directly via Metav Werkzeuge or contact our consultants for tailored advice. Teknik Makina S761TM shaft cutter — for ADMX 0702 indexable inserts, Ø 20 mm Teknik Makina S761TM shaft cutter is designed for milling with ADMX 0702 indexable inserts, offering a compact total length and robust shank for repeatable setups in production and workshop environments. *Suitable for ADMX 0702 inserts *Ø 20 mm shank diameter *Five cutting edges for high material removal *Total length 125 mm Precise compatibility with ADMX 0702 indexable inserts for efficient production The tool is optimised for ADMX 0702 indexable inserts, giving a straightforward interface between cutter and insert that reduces set-up time and minimises downtime. Using a dedicated insert format simplifies inventory management and makes tool replacement predictable. For users migrating from different systems, the clear specification for the insert format and manufacturer compatibility ensures the machining process stays consistent and measurable. The focus is on reliable repeatability rather than experimental setups. Stable shank geometry for consistent tool life and accuracy A Ø 20 mm shank and a balanced total length of 125 mm provide dimensional stability during milling operations. The cutter’s design keeps deflection low at typical spindle speeds for indexable tooling, supporting consistent surface quality and dimensional tolerance. The 17 mm cutting length and a 90° cutting angle are suited to general facing and shoulder milling tasks, enabling controlled metal removal without unnecessary tool movement. Secure clamping and quick insert handling to lower cycle time Fast, secure clamping is achieved with a Torx M2x4.2 screw and a matching T6 key specification, enabling safe fixation of the insert and straightforward servicing at the machine. The use of a standard Torx fastening reduces the risk of incorrect torque and helps maintain insert seat integrity, which in turn extends the effective life of the indexable inserts. Fewer tool-change interruptions translate directly into higher effective machining time per shift. Practical workshop advantages and application scope Well suited to general milling operations that call for indexable-insert tooling, the cutter supports a variety of metals when matched with appropriate inserts from the specified manufacturer. The compact weight of 0.3 kg and the robust shank make it a practical choice for production lines and jobbing workshops that prioritise predictable, repeatable results. The specification encourages modular tool management and enables better planning for tool rotation and insert stock. Contact Metav Werkzeuge today to discuss application fit and secure the Teknik Makina S761TM shaft cutter for ADMX 0702 inserts; our team in Emmerich provides practical advice and fast dispatch for production-ready tooling. Technical Data SKU: S761TM Manufacturer: Teknik Makina Compatible insert: ADMX 0702 Compatible insert manufacturer: Pramet Torx screw: M2x4,2 Torx key: T6 Weight: 0.3 kg Core dimensions Shaft diameter: 20 mm Cutting length: 17 mm Diameter: 20 mm Number of cutting edges: 5 Total length: 125 mm Cutting angle: 90° Materials & features For ADMX 0702 indexable inserts Compatible with Pramet inserts Secure Torx fastening system Designed for repeatable set-ups and quick insert changes FAQ Which inserts fit this cutter? The cutter is built for ADMX 0702 indexable inserts; compatibility with Pramet inserts is specified for straightforward replacement and stock planning. What are the key dimensions to check before ordering? Important dimensions include the Ø 20 mm shank diameter, 17 mm cutting length, 125 mm total length and a 90° cutting angle to ensure correct machine and holder fit. How is the insert secured in the cutter? The insert is fastened using a Torx M2x4.2 screw; the specified drive size is T6, which helps achieve consistent clamping torque. Is the cutter balanced for higher spindle speeds? The robust shank diameter and compact total length support reduced deflection and balance appropriate for indexable-insert milling; specific balancing for high-speed applications should follow machine and spindle recommendations. Can this cutter be used for heavy stock removal? With the correct insert grade and cutting parameters, the design supports effective material removal; the five cutting edges and shank stability favour productive milling cycles. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
High-performance shank cutters and ball nose cutters for efficient milling
Insert shank cutters and ball nose cutters combine flexibility and productivity for a wide range of milling tasks. The category covers steel-bodied shank cutters fitted with indexable inserts for economical roughing, face milling, cornering and slotting, as well as ball nose cutters for contouring and 3D finishing.
How these tools work and where they belong
Shank cutters with indexable inserts use a carrier body made from hardened steel; the cutting edges are provided by removable inserts rather than a solid tool blank. Where tools do not have internal coolant, process heat and chips are managed via external coolant nozzles or compressed air, which is sufficient for open, surface-level and easily accessible milling on standard materials. Shank cutters with internal coolant feature fine internal channels that deliver coolant or blasting air directly to each cutting edge under pressure. This targeted supply is essential for deep pockets, cavities, full slotting and machining of heat-resistant or difficult-to-machine materials, because it prevents chip re-cutting, protects cutting edges from thermal overload and enables higher feed rates and improved surface quality.
Cut cycle times and reduce tooling costs
- Replaceable indexable inserts reduce consumable costs and shorten tool change time.
- Targeted internal coolant improves chip evacuation and extends insert life.
- Robust steel carrier bodies enable heavy-duty roughing without frequent tool replacement.
- Suitable for roughing, planing, corner milling and slot milling as well as precision 3D profiling with ball nose cutters.
A practical choice for purchasing and stocking tools
Metav brings a pragmatic purchasing advantage: a broad range of milling solutions is available from a single European quality hub. Metav’s focus on democratising precision means workshops benefit from a wide assortment, consistent quality control from Emmerich and steady supply — supported by decades of expertise and over 48,000 satisfied customers. Choose Metav for a centralised sourcing strategy that reduces supplier complexity while keeping access to both insert milling cutters (also referred to as insert milling cutters or indexable end mills) and ball nose cutters (also known as ball nose end mills or radius cutters) straightforward.
Quick summary
Insert shank cutters and ball nose cutters deliver flexible, cost-effective milling: replaceable inserts lower running costs, and internal coolant options enable higher performance and longer tool life where chip control is critical.
FAQ
When should I choose a shank cutter with indexable inserts rather than a solid carbide end mill?
Choose shank cutters with indexable inserts for economical roughing and high-stock-removal tasks where replacing inserts is preferable to replacing an entire tool; they are especially effective for face milling, cornering and slotting operations.
Does internal coolant make a measurable difference for ball nose cutters?
Yes. Internal coolant directed to each cutting edge reduces chip re-cutting and thermal stress, which improves surface finish and increases insert life when machining deep pockets, cavities or heat-resistant materials.
Can shank cutters without internal coolant be used for general workshop milling?
Absolutely. Tools without internal coolant rely on external coolant nozzles or compressed air and are well suited to open, superficial and easily accessible milling on standard materials.
What milling operations are shank cutters for indexable inserts typically used for?
Shank cutters with indexable inserts excel at economical roughing, planfräsen (face milling), corner milling and slot milling; ball nose cutters are the preferred choice for 3D profiling and finishing operations.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com