Efficient shaft cutters and ball nose cutters for versatile milling
Shaft cutters and ball nose cutters serve as robust rotating tools for roughing, face milling, corner milling and slotting, offering economical replacement of indexable inserts rather than whole solid tools. Available in versions with internal coolant to feed lubricant directly to each cutting edge or without internal coolant relying on external nozzles, these cutters ensure effective chip evacuation and thermal control suited to standard materials or deep pocket and cavity work. By preventing chip re-cutting and protecting cutting edges, they deliver higher feed rates, improved surface finish and extended tool life in demanding metalworking applications.
20mm Solid Carbide End Mill For XOMX 0602-1204 Indexable Inserts, 55mm Cutting Length, 3 Flutes - Teknik Makina
Take advantage of the combination of a 20 mm shank, a 55 mm cutting length and 3 cutting edges for stable, productive milling operations; order the tool directly via Metav Werkzeuge or ask consultants if guidance on insert selection is required. Shank Milling Cutter S628TM – 20 mm diameter, 3 cutting edges (Teknik Makina) The Shank Milling Cutter S628TM is a robust indexable milling tool designed for use with XOMX 0602–1204 indexable inserts, offering compact geometry for shoulder milling and slotting in standard machining setups 20 mm shank diameter 55 mm cutting length 3 cutting edges Compatible with SECO XOMX indexable inserts Stable machining for consistent throughput The compact 20 mm shank and optimised geometry provide a high degree of rigidity, which reduces vibration and improves tool life. With a 55 mm cutting length and 3 cutting edges, the cutter delivers an efficient material removal rate while maintaining surface quality; the combination of these dimensions allows shorter cycle times and steadier feeds. Decision-makers benefit from predictable performance in series production, where reduced tool variation translates directly into fewer reworks and steadier output. Fast, secure insert changes to minimise downtime Insert retention is handled via a precise fastener system: a M2.5 Torx screw fixed with a T8 key ensures repeatable clamping force and straightforward indexable insert swaps. The use of standardised attachment components simplifies workshop logistics and reduces maintenance time between operations. The indexable concept also lowers long-term running costs, as worn cutting edges can be rotated or replaced without discarding the entire tool body. Compact dimensions suited to versatile set-ups With a 150 mm overall length and a nominal mass of 0.373 kg, the cutter balances accessibility and stability for a wide range of milling stations. The tool’s 90° cutting angle supports true shoulder faces and square corners without extensive secondary finishing. Such proportions make the cutter suitable for machines with limited overhang while providing enough reach for common fixture layouts; handling is comfortable during set-up and the relatively low weight minimises spindle load during rapid repositioning. Reliable supply and technical backing for production use Sourcing the tool through Metav brings an established supply chain and workshop expertise to the procurement decision. Metav’s distribution model functions as a quality filter for the European market, backed by long-term relationships with customers and a comprehensive product range. This combination supports planned stock rotation and consistent replenishment, helping production planners secure the right tooling at the right time while maintaining traceability across orders. Choose the Teknik Cutting Tools S628TM for reliable indexable milling performance and contact Metav Werkzeuge for procurement and technical advice from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 for further specification support Technical data Article number: S628TM Manufacturer: Teknik Makina Product name: Schaftfräser for XOMX 0602-1204 Indexable Inserts ECLASS: 21180806 ETIM: EC011860 Facts Diameter: 20 mm Shank diameter: 20 mm Cutting length: 55 mm Overall length: 150 mm Cutting edges: 3 Weight: 0.373 kg Cutting angle: 90° Special features Compatible inserts: XOMX 0602–1204 (also XOMX 0903) Compatible with SECO inserts Torx screw: M2.5x5.5 Torx key: T8 FAQ Which indexable inserts are compatible with this cutter? The S628TM is specified for XOMX 0602–1204 indexable inserts and is noted as compatible with XOMX 0903 variants; adapters or specific seat forms from SECO may be required for certain grades. How are inserts secured in the cutter? Insert clamping is achieved with a M2.5 Torx screw tightened using a T8 key, providing repeatable clamping force for safe machining and rapid changeovers. What machining tasks suit this cutter best? The tool’s 90° cutting angle and compact geometry make it well suited to shoulder milling and slotting where square faces and accurate edges are required. Does the cutter require special spindle interfaces? The shank form is designed for conventional collet or holder systems that accept a 20 mm shank; the 150 mm overall length and modest mass support standard workshop set-ups. How does the cutter aid production efficiency? The combination of a rigid 20 mm shank, a 55 mm cutting length and three cutting edges reduces vibration and allows stable feeds, which helps maintain surface finish and extend insert life Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Solid Carbide Face Mill For ADMX 0702 Indexable Inserts, 4 Flutes 17mm Cutting Length, 90° - Teknik Makina
Benefit from a stable clamping interface and proven indexable-insert compatibility: the cutter combines a 20 mm shank with ADMX 0702 insert support and four cutting edges for dependable production throughput. Order the shank milling cutter directly via Metav Werkzeuge or consult our specialists for application advice. Shank milling cutter S760TM — 20 mm shank, for ADMX 0702 indexable inserts (Teknik Makina) The Shank milling cutter S760TM is a robust 4-flute tool engineered for face and shoulder milling with ADMX 0702 indexable inserts in general machining applications High-stability 20 mm shank Compatible with ADMX 0702 inserts Four cutting edges for balanced cutting 125 mm overall length for extended reach Precision and stability for repeatable machining The tool offers a 20 mm shank and a balanced four-flute geometry that reduces vibration and improves surface finish during both roughing and light finishing passes. The combination of a solid shank diameter and a nominal 125 mm overall length provides stable clamping and repeatable tool life, which translates directly into fewer tool changes and more consistent part tolerances. For shops working to tight process windows, the cutter’s 90° cutting angle supports square shoulder operations with predictable cutting forces. Designed for productivity and simple maintenance With a dedicated insert pocket for ADMX 0702 indexable inserts and a secure M2x4.2 Torx screw (Torx key T6) the system simplifies insert changes and reduces downtime. The modular insert design allows rapid replacement without regrinding, and the cutter’s 17 mm effective cutting length delivers material engagement suitable for common face and slotting tasks. The modest weight of 0.293 kg keeps spindle load low while maintaining rigidity, making the cutter suited for both manual tool setups and CNC environments where cycle time and tool-change efficiency matter. Compatibility, application and tool-room guidance Manufactured for compatibility with Pramet-style tooling, the S760TM supports indexable insert use across a range of ferrous and non-ferrous operations when paired with the appropriate insert grade. The adapter-style pocket accepts ADMX 0702 plates, enabling the selection of carbide grades and coatings tailored to stainless steels, alloy steels or general engineering materials. For predictable results, match insert geometry and grade to the specific machining task; the cutter’s four cutting edges deliver a balanced cut pattern that helps maintain tool life and workpiece quality. For technical fit confirmation or to specify the S760TM for a particular application, contact Metav Werkzeuge by phone at +49 2822 7131930 or by email at info@metav-werkzeuge.com — our advisors can confirm suitability and offer ordering support Technical data Article number: S760TM Manufacturer: Teknik Makina Article name: Shank milling cutter for ADMX 0702 indexable inserts Compatible insert type: ADMX 0702 Core dimensions Shank diameter: 20 mm Cutting length (effective): 17 mm Cutting diameter: 20 mm Number of cutting edges: 4 Overall length: 125 mm Weight: 0.293 kg Cutting angle: 90° Designs / Special features Torx screw: M2x4,2 Torx key: T6 Compatible with Pramet inserts 4-flute geometry for balanced cutting FAQ Which indexable inserts fit the cutter? The S760TM shank milling cutter from Teknik Makina is designed for ADMX 0702 indexable inserts and is compatible with Pramet-manufactured plates of that designation. Is the shank size suitable for standard toolholders? Yes, the S760TM features a 20 mm shank that fits holders and collets specified for 20 mm tooling, providing secure clamping for stable machining. What fastening hardware is required for insert changes? Insert clamping uses an M2x4.2 Torx screw secured with a T6 Torx key; the S760TM design facilitates rapid and repeatable insert replacement. For which operations is this cutter best suited? The S760TM is intended for face and shoulder milling where a 90° cutting angle and four cutting edges provide efficient material removal and a good surface finish. How heavy is the tool and does weight affect spindle load? The S760TM weighs 0.293 kg, which is light enough to keep spindle load low while maintaining the rigidity needed for industrial machining cycles. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Solid End Mill For APMT 0903 Indexable Inserts, 3 Flutes, 30mm Cutting Height, M2.5x5.5 Torx Screw - Teknik Makina
Take advantage of a secure, quick‑change system and a robust 20 mm shank for consistent milling performance; compatibility with APMT 0903 indexable inserts keeps tooling costs low and maintenance simple — order directly via Metav Werkzeuge or contact our consultants for tailored advice. Shank milling cutter for APMT 0903 indexable inserts — 20 mm shank, 3 cutting edges (Teknik Makina) A Shank milling cutter designed to accept APMT 0903 indexable inserts for versatile workshop milling tasks and quick insert replacement 20 mm shank diameter Compatible with APMT 0903 inserts Three cutting edges for steady cutting M2.5x5.5 Torx screw, T8 key required Stable clamping and reliable insert seating for uninterrupted production The solid 20 mm shank and balanced geometry ensure a stable tool connection to the spindle, reducing chatter and improving surface quality. Designed around the APMT 0903 insert form, the holder provides predictable cutting behaviour and easy insert indexing. The secure fastening with an M2.5x5.5 Torx screw (T8) maintains seating accuracy during step changes and when re‑setting inserts, which helps to reduce setup time and minimise scrap in serial work. Compact dimensions that suit tight tool magazines and workshop shelves With an overall length of 120 mm and a tool weight of 0.26 kg, the cutter combines reach with compactness for flexible tool‑changer compatibility. The 30 mm cutting height and three cutting edges deliver a good balance between material removal and tool life, allowing workshops to consolidate operations with fewer tool types. This compact footprint supports straightforward inventory management and faster tool changes on the shop floor. Cost efficiency through indexable insert technology Using indexable inserts cuts consumable costs and maintenance downtime compared with brazed or solid cutters. When one edge is worn, the APMT 0903 insert can be rotated or replaced without discarding the entire tool body — a practical advantage for repetitive production runs. The holder’s compatibility with inserts from manufacturers such as Korloy extends sourcing options and simplifies replenishment for purchasing teams. Practical workshop integration and handling The cutter’s simple geometry and standardised fixing mean it integrates easily with existing milling setups. The three‑edge configuration promotes even wear and reduces vibration, while the modest weight aids safe manual handling during tool fitting. Technical staff will appreciate the familiar Torx interface (T8) for quick tightening and the clear compatibility list that limits selection errors during tool assembly. For reliable indexable milling solutions from Teknik Cutting Tools, contact Metav Werkzeuge for expert advice and dependable supply from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: S048TM Manufacturer: Teknik Makina (Teknik Cutting Tools) Brand: Teknik Makina Data Shank diameter: 20 mm Diameter: 20 mm Overall length: 120 mm Cutting height: 30 mm Number of cutting edges: 3 Weight: 0.26 kg Special features For APMT 0903 indexable inserts Compatible with Korloy inserts Torx screw M2.5x5.5 (T8 key) Suitable for quick insert indexing SKU: S048TM FAQ Which indexable inserts fit this cutter? The cutter accepts APMT 0903 indexable inserts; compatibility with brands such as Korloy is indicated for the holder (SKU S048TM). How are the inserts secured? Inserts are fixed with an M2.5x5.5 Torx screw and require a T8 key for tightening, providing reliable seating and repeatable clamping. How many cutting edges does the tool use and what is the benefit? The holder is designed for three cutting edges, which promotes balanced cutting forces and even insert wear for more consistent part quality. What are the key dimensions to check when fitting the tool? Check the 20 mm shank diameter, 120 mm overall length and 30 mm cutting height to ensure compatibility with the machine tool and tool magazine. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Solid End Mill For APXT 1003 Indexable Inserts 3 Flutes 40mm Cutting Length 120mm Overall, 90° Cutting Angle - Teknik Makina
Take advantage of a compact holder that combines a 20 mm shank for secure clamping with a 3‑edge cutting geometry and compatibility with APXT 1003 indexable inserts for consistent, repeatable machining. Order the tool via Metav Werkzeuge or consult Metav's specialists for application advice and reliable delivery from Emmerich. Shank milling cutter S166TM — 20 mm shank, for APXT 1003 indexable inserts (Teknik Makina) The Shank milling cutter S166TM is a robust shank holder engineered to accept APXT 1003 indexable inserts for stable face and slot milling in production and workshop environments 20 mm shank diameter for stable clamping 40 mm effective cutting length 3 cutting edges for smooth chip removal Compatible with APXT 1003 indexable inserts Stable clamping and repeatable tool geometry for consistent results The holder is built around a 20 mm shank, which delivers secure clamping in standard toolholders and minimises vibration during cutting. With a three cutting edge arrangement and a defined 90° cutting angle, the tool provides predictable engagement and steady surface finish across repeated cycles. Use of APXT 1003 indexable inserts reduces machining variability because inserts can be indexed or replaced without regrinding; this keeps setup times low and supports stable process capability in series production. Compatibility with Korloy inserts offers broad availability of grades and geometries for matching cutting conditions. Fast insert changes and low downtime through straightforward fastening Insert replacement is facilitated by an accessible clamping system: the unit is secured using an M2.5x5.5 Torx screw tightened with a T8 key, enabling rapid, tool‑room friendly insert changes. The holder’s overall length of 120 mm and a 40 mm cutting length balance reach and rigidity, while a mass of 0.278 kg keeps handling straightforward during tool setup and magazine loading. These features combine to reduce changeover time and support higher machine utilisation without complex maintenance procedures. Practical application benefits and dependable supply chain Designed for operations that rely on indexable inserts, the cutter supports efficient replacement strategies and predictable consumable costs, helping to lower the cost per component in repetitive milling tasks. The compact design is suitable for face milling, shoulder milling and light slotting where APXT 1003 inserts are specified. Procuring the S166TM through Metav Werkzeuge ensures centralised sourcing and a quality filter for the European market, backed by a broad product range and consistent stock handling at the Emmerich site. For technical specification checks or to secure supply of the S166TM from Metav Werkzeuge in Emmerich, contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S166TM Product name: Shank milling cutter S166TM Description: for APXT 1003 Indexable Inserts Manufacturer: Teknik Makina EClass: 21180806 ETIM: EC011860 Facts Shank diameter: 20 mm Cutting length: 40 mm Overall length: 120 mm Diameter: 20 mm Number of cutting edges: 3 Weight: 0.278 kg Cutting angle: 90° Torx screw: M2.5x5.5 Torx key: T8 Special features Compatible inserts: APXT 1003 Suitable insert supplier: Korloy Files: 62de7eecbd24461b3d5f7a7d, 62de7e5c0f56dbb4de4dbf0f FAQ What inserts are compatible with this holder? The holder accepts APXT 1003 indexable inserts; it is listed as compatible with inserts from Korloy and other suppliers offering the same APXT 1003 geometry. How is the insert secured in the tool? Insert clamping is achieved with an M2.5x5.5 Torx screw tightened using a T8 key, allowing quick replacement and secure fixation of cutting tips. What are the key dimensions to consider for machine setup? Key dimensions include a 20 mm shank diameter, 40 mm effective cutting length and an overall length of 120 mm, which determine reach and clamping requirements for the toolholder. Is the S166TM suitable for series production? The S166TM is engineered for repeatable performance with indexable inserts, offering rapid insert changes and stable geometry that support efficient series production workflows. Teknik Makina: Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Solid End Mill For APXT 1003 Indexable Inserts 3 Flutes 70mm Cutting Length, 90° Cut Angle - Teknik Makina
Take advantage of the combination of robust tooling geometry, secure insert clamping and straightforward maintenance for uninterrupted milling operations. Benefit from the tool's 20 mm shank, 70 mm effective cutting length and compatibility with APXT 1003 indexable inserts — order or request technical advice via Metav Werkzeuge. Shaft milling cutter S192TM — 20 mm shank, 3 cutting edges (Teknik Makina) A Shaft milling cutter S192TM engineered for indexable-insert milling, designed to accept APXT 1003 inserts for reliable face and slot milling in industrial production. 20 mm shank diameter 70 mm effective cutting length 3 cutting edges for stable machining Compatible with APXT 1003 Korloy inserts High-performance geometry that raises throughput The tool's engineered geometry and 3 cutting edges deliver stable material removal and consistent chip formation. The solid 20 mm shank provides rigid clamping in standard toolholders, which reduces vibration and improves surface finish. With a 70 mm effective cutting length, the cutter supports longer engagement without sacrificing stiffness, helping to maintain cycle times and reduce the need for frequent rework. These characteristics translate directly into measurable productivity gains on the shop floor: fewer tool changes, more predictable cuts and a better utilisation of machine capacity. Secure indexable-insert system for fast maintenance Designed for use with APXT 1003 indexable inserts from Korloy, the cutter uses a Torx clamping screw (M2.5x5.5) secured with a T8 key to ensure repeatable insert seating and quick replacement. Indexable inserts separate the cutting edge from the body, so worn edges are changed in seconds rather than replacing the entire tool. This results in lower tooling inventory costs and shorter downtime. The robust clamping complements the tool's 90° cutting angle, providing solid face engagement and reliable cutting-edge support during heavy passes. Practical benefits for everyday production workflows With an overall length of 250 mm and a tool weight of 0.623 kg, the cutter balances accessibility with handling convenience during set-up. The combination of compact mass and rigid design simplifies tool handling and reduces clamping errors, while the indexed insert approach reduces machining interruptions. For production planners and workshop supervisors, this means improved line stability and easier spare-parts management: one body, simple insert inventory and straightforward replacement routines — all of which contribute to reduced operational complexity and lower total cost of ownership. Why indexable-insert milling is effective for modern workshops Indexable-insert tooling like this shaft cutter is tailored for repeatability and cost-efficiency. The concept separates the consumable cutting edge from the tool body, enabling consistent tool geometry after each insert change and diminishing the need for precision grinding or resharpening. The S192TM tool body keeps capital expenditure predictable while allowing the operator to maintain high cutting performance through standardised insert grades and clamping practice. For facilities aiming to streamline tooling logistics and maintain high machine utilisation, this system provides a practical, scalable solution. Contact Metav Werkzeuge for tailored technical advice or a specification match for Teknik Makina tools and the S192TM shaft milling cutter Technical Data SKU: S192TM Manufacturer: Teknik Makina Compatible inserts: APXT 1003 (Korloy) Numbers / Facts Shank diameter: 20 mm Effective cutting length: 70 mm Cutting edges: 3 Overall length: 250 mm Weight: 0.623 kg Cutting angle: 90° Special features / Versions For APXT 1003 indexable inserts Compatible with Korloy inserts Torx screw M2.5x5.5 Torx key size: T8 FAQ What insert type does the cutter accept? The shaft milling cutter accepts APXT 1003 indexable inserts; the body is matched to Korloy APXT 1003 grades. How is an insert fastened in the tool? Inserts are clamped with a Torx screw (M2.5x5.5) requiring a T8 key for secure and repeatable seating. What are the primary dimensions to check for toolholder compatibility? Key dimensions are the 20 mm shank diameter and the overall length of 250 mm; verify toolholder clamping and reach for safe operation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Solid End Mill for APXT 1003 Indexable Inserts, 3 Flutes, 60mm Cutting Length, 90° Helix - Teknik Makina
Take advantage of the tool's compatibility and robust clamping for reduced downtime and consistent machining results; the combination of a 20 mm shank and a 60 mm cutting length supports deeper engagement while maintaining tool stability. Order the component directly via Metav Werkzeuge or consult the Metav team for integration advice. Shank Cutter S176TM — Indexable insert cutter for APXT 1003, Ø20 mm (Teknik Cutting Tools) A Shank Cutter S176TM designed for heavy-duty indexable milling where secure clamping and repeatable geometry are essential; ideal for workshops and production lines using APXT 1003 indexable inserts. Indexable insert shank cutter Ø20 mm Fits APXT 1003 indexable inserts 3 cutting edges for stable machining Torx clamping with M2.5x5.5 screw Deliver consistent material removal with secure insert mounting The S176TM combines a stable Ø20 mm shank with a three-edge configuration to deliver steady cutting forces and predictable tool behaviour, which reduces vibration and improves surface finish. Compatibility with APXT 1003 indexable inserts makes insert changes straightforward and cost-efficient: worn cutting edges are replaced without sending the whole tool for regrinding, lowering lifecycle costs and machine downtime. The result is faster cycle times and fewer process interruptions in serial milling tasks. Built geometry for repeatability and easy clamp replacement With a 60 mm cutting length and a total length of 150 mm, the tool balances reach and rigidity for many common milling operations. The clamping system uses a Torx screw M2.5x5.5 tightened with a T8 key, ensuring repeatable seat pressure and secure insert retention under load. The three cutting edges produce uniform chip loads that support stable feeds and help extend insert life, while the modest tool weight of 0.345 kg contributes to lower spindle stress during prolonged cycles. Designed for workshop integration and straightforward stocking The cutter is specified for APXT 1003 inserts and lists Korloy as a compatible insert manufacturer, simplifying procurement and inventory management for production and maintenance teams. The modular nature of the system supports rapid insert replacement, which lowers throughput risk in mixed-shop environments. For companies seeking consolidated sourcing, Metav Werkzeuge provides supply continuity from its Emmerich hub and technical accompaniment for selecting matching inserts and clamping components. Discuss integration options with Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com to specify the Teknik Cutting Tools S176TM for production use Technical Data Article number: S176TM Product name: Shank cutter for APXT 1003 indexable inserts Brand: Teknik Makina Compatible inserts: APXT 1003 Diameter: 20 mm Shank diameter: 20 mm Cutting length: 60 mm Overall length: 150 mm Number of cutting edges: 3 Weight: 0.345 kg Cutting angle: 90° For APXT 1003 indexable inserts Compatible with Korloy inserts Torx screw: M2.5x5.5 Torx key: T8 SKU: S176TM FAQ Which inserts fit this shank cutter? The S176TM is specified for APXT 1003 indexable inserts; Korloy inserts marked APXT 1003 are compatible. How many cutting edges does the cutter have? The cutter uses 3 cutting edges, providing a balance between chip control and feed rate capability. What is the shank diameter and overall reach? The tool has a 20 mm shank diameter and an overall length of 150 mm, with a cutting length of 60 mm. Which clamping hardware is required for insert fixation? Clamping is achieved with a Torx screw M2.5x5.5, tightened using a T8 key, ensuring secure and repeatable insert seating. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Solid End Mill For WNMU 0403 Indexable Inserts, 3 Flutes, 120mm Length - Teknik Makina
Benefit from a compact, indexable solution that combines stable clamping and efficient material removal via its three cutting edges; ideal for routine steel machining where quick insert changes reduce downtime. Order the S457TM directly via Metav Werkzeuge or ask our consultants if needed. S457TM Shank milling cutter — 20 mm shank, for WNMU 0403 indexable inserts (Teknik Makina) The S457TM Shank milling cutter is a precision cutting tool designed for reliable steel machining with WNMU 0403 indexable inserts, offering a practical solution for production and repair workshops. Compatible with WNMU 0403 indexable inserts 20 mm shank for stable clamping Three cutting edges for efficient removal Lightweight 0.29 kg for easy handling High-efficiency cutting with predictable tool life The tool is engineered for steady metal removal rates thanks to its three cutting edges and secure insert seating. Using indexable inserts means that cutting geometry can be restored in seconds by replacing just the insert, which keeps process times low and machining quality consistent. The cutter is certified for the WNMU 0403 insert family and is compatible with ISCAR inserts, so material removal for general steel machining tasks is economical and repeatable without complex regrinding. Stable mounting and straightforward insert fastening A rigid connection between the toolholder and spindle is critical for surface finish and dimensional accuracy; the cutter’s 20 mm shank provides a compact, vibration-resistant interface for most toolholders. Insert clamping is secured with a Torx system (key torx T8) and a dedicated screw (M2.5x5.5), ensuring repeatable seating and minimal play. These features support stable clamping and enable a quick insert change, which reduces set-up time and supports lean production workflows. Practical workshop benefits and manageable handling With an overall length of 120 mm overall length and a mass of only 0.29 kg, the cutter balances reach with good tool stability in short to medium overhang applications. The light weight simplifies manual handling and tool changes, while the geometry minimises the risk of chatter in typical workshop setups. Backed by Teknik Makina, the shank milling cutter S457TM is a pragmatic choice for vendors and maintenance engineers looking for a dependable, easy-to-service indexable solution that keeps machines running. For tailored process advice or to order the Teknik Makina S457TM, contact Metav Werkzeuge in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com for prompt assistance and reliable delivery Technical data Article number: S457TM Manufacturer: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Facts Diameter: 20 mm Shank diameter (D): 20 mm Overall length: 120 mm Number of cutting edges: 3 Weight: 0.29 kg Special features Compatible inserts: WNMU 0403 (ISCAR) Torx key: T8 Torx screw: M2.5x5.5 Brand: Teknik Makina FAQ What inserts fit this milling cutter? The cutter accepts WNMU 0403 indexable inserts; compatibility with ISCAR inserts is specified for the S457TM shank milling cutter. How is the insert secured? Insert fastening uses a Torx screw (M2.5x5.5) tightened with a torx T8 key to ensure secure and repeatable seating on the S457TM. What is the shank diameter and overall length? The tool has a 20 mm shank diameter and a 120 mm overall length, providing a compact, stable mounting for general workshop applications. Is this cutter suitable for steel work? Yes — the geometry and the use of indexable inserts make the tool well suited for routine steel machining where reliable material removal and quick insert changes are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Solid Shank Cutter For APKT 1003 Indexable Inserts With Internal Coolant, 150mm - Teknik Makina
Take advantage of a compact, shank-mounted solution that combines internal coolant and proven APKT 1003 insert compatibility for consistent chip evacuation and extended tool life; order the cutter directly via Metav Werkzeuge or request guidance from our consultants for integration into production. 20 mm indexable milling cutter S767-2TM — internal coolant, for APKT 1003 inserts (Teknik Makina) The 20 mm indexable milling cutter S767-2TM is a shank-mounted milling tool designed for efficient indexable-insert milling with integrated coolant supply, suited to production and jobbing environments. 20 mm shank diameter for rigid clamping Integrated internal coolant for improved chip control Compatible with APKT 1003 indexable inserts Torx T8 clamping screw M2.5x5.5 for secure fastening Productivity gains through coolant-assisted chip control The S767-2TM is engineered for reliable material removal using a compact design that supports consistent chip evacuation via its internal coolant channel. By directing coolant directly to the cutting edge, the tool reduces heat at the cutting zone and helps prevent built-up edge, which in turn preserves insert life and maintains surface finish. This results in lower tooling costs per part and a steadier production rhythm, making the cutter a pragmatic choice where process stability and long runtimes matter. Secure insert interface and standardised compatibility Built to accept APKT 1003 indexable inserts, the cutter provides a familiar interface for shops that rely on this popular insert geometry. Compatibility with Palbit insert supply ensures a wide aftermarket selection for grades and coatings. The use of a Torx T8 clamping system with an M2.5x5.5 screw delivers repeatable clamping torque and straightforward indexability, supporting fast insert changes and minimal downtime during shift changes or batch swaps. Compact design for easy handling and installation With a 20 mm shank diameter and an overall length of 150 mm, the tool balances reach and rigidity for many common milling set-ups. The 80 mm cutting length and three cutting edges provide a predictable engagement per pass, while the modest weight (0.201 kg) simplifies handling during tool changes and reduces spindle load. The cutter’s shank geometry is compatible with standard toolholders, enabling rapid integration into existing toolchains without special adaptations. Practical application focus for production environments This indexable cutter is intended for general milling operations where insert change speed, coolant delivery and process reliability are priorities. The three cutting edges permit even load distribution and smooth cutting action, which is particularly beneficial in repetitive production runs. For operators seeking a compact, coolant-capable solution that pairs with widely available APKT 1003 inserts, this tool offers a balanced combination of serviceability and predictable performance. Contact Metav Werkzeuge for procurement advice on the Teknik Makina S767-2TM indexable milling cutter with internal coolant and secure Torx clamping; our Emmerich specialists can advise on toolholder pairing and logistics Technical data SKU: S767-2TM Label: 20mm Schaftfräser APKT 1003 L150mm mit Innenkühlung Manufacturer: Teknik Makina Core specifications Diameter: 20 mm Overall length: 150 mm Shank diameter: 20 mm Cutting length: 80 mm Cutting edges: 3 Weight: 0.201 kg Special features Internal coolant: yes Compatible inserts: APKT 1003 Compatible insert manufacturer: Palbit Torx key: T8 Torx screw: M2.5x5.5 FAQ Which inserts fit this cutter? The cutter accepts APKT 1003 indexable inserts; matching grades from Palbit are compatible for a range of cutting conditions. How does the internal coolant improve performance? Direct coolant delivery to the cutting zone reduces heat and helps evacuate chips, which extends insert life and supports more consistent component quality with the S767-2TM. What clamping hardware is required for insert changes? Insert retention uses a Torx T8 key with an M2.5x5.5 clamping screw to ensure repeatable and secure fastening. Is the shank compatible with standard toolholders? The 20 mm shank diameter is intended for standard shank holders; the compact 150 mm overall length aids compatibility in common milling setups. How many cutting edges does the tool provide and what is the benefit? The tool has three cutting edges, which distribute cutting forces evenly and help maintain smooth cutting action during continuous production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Solid Shank Cutter For LNMX 0402 Indexable Inserts Internal Coolant, 100mm Length - Teknik Makina
Take advantage of a robust combination of precise compatibility and secure coolant supply: the tool's internal coolant and support for LNMX 0402 indexable inserts deliver consistent chip control and extended insert life. Order this cutter directly via Metav Werkzeuge or consult our experts for tailored tooling configurations. Shank milling cutter S091TM — 20 mm, LNMX 0402 compatible (Teknik Makina) A compact shank milling cutter designed for indexable LNMX 0402 inserts, delivering stable cutting performance in short-reach milling operations. 20 mm shank diameter for stable clamping Internal coolant for improved chip evacuation Compatible with LNMX 0402 indexable inserts Five cutting edges for steady material removal Greater productivity through stable cutting and coolant-fed control The 20 mm diameter design combines a compact profile with a 100 mm overall length and a 20 mm cutting length, delivering a stiff, vibration-resistant tool for face and slot milling where short overhang is required. With five cutting edges, the tool distributes cutting forces evenly, which reduces load peaks and improves surface consistency. The integrated internal coolant channel supplies cutting fluid directly to the insert pocket, enhancing chip evacuation and reducing thermal stress on the cutting edge for longer insert life and fewer unplanned stops. Fast insert changes with standardised clamping and clear compatibility Indexable inserts of the LNMX 0402 family are used on the head, enabling economical index changes instead of full-tool replacement. The head is designed for easy securing using a T6 Torx key and the corresponding M1.8x4.1 Torx screw, simplifying maintenance routines in production environments. The tool is specified for use with Korloy-manufactured inserts, ensuring predictable fit and repeatable seating. This modular approach reduces downtime and keeps cutter inventory lean while maintaining consistent cutting geometry. Consistent handling, predictable logistics and workshop readiness Weighing approximately 0.22 kg, the cutter is light enough for rapid changeovers yet engineered for reliable balance during operation. Its standard 20 mm shank enables straightforward mounting in common toolholders, while the compact head geometry supports close-tolerance machining in constrained setups. Supplied by a trusted network, the assembly benefits from straightforward spare-part identification and repeatable assembly steps, making it suitable for small-batch production as well as higher-throughput cells where tool change predictability matters. Contact Metav Werkzeuge for application advice or to configure this Teknik Cutting Tools shank milling cutter to specific production needs and ensure the best insert and coolant setup for each machining task. Technical data Article number: S091TM Product type: Shank milling cutter Designation: for LNMX 0402 Indexable Inserts Core dimensions Diameter: 20 mm Overall length: 100 mm Cutting length: 20 mm Shank diameter: 20 mm Number of cutting edges: 5 Weight: 0.22 kg Features & compatibility Internal coolant: yes Compatible inserts: LNMX 0402 Recommended insert manufacturer: Korloy Torx key: T6 Torx screw: M1.8x4.1 Manufacturer: Teknik Makina FAQ Which inserts fit this cutter? The cutter accepts LNMX 0402 indexable inserts; compatibility is specified for Korloy inserts and standard LNMX 0402 geometries. Is coolant supplied through the tool? Yes, the tool has internal coolant channels to deliver fluid directly to the insert zone for improved chip control. What clamping hardware is required for insert changes? Insert retention uses a T6 Torx key with an M1.8x4.1 Torx screw for secure and repeatable clamping. What are the main dimensions of the cutter? The cutter has a 20 mm diameter, 100 mm overall length and 20 mm cutting length, suitable for short-overhang milling tasks. Which manufacturer produced this tool and what is the SKU? This item is supplied by Teknik Cutting Tools and sold under SKU S091TM; it is distributed via Metav Werkzeuge for European supply. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Solid Shank End Mill for BOMT 1304 Indexable Inserts Internal Coolant, 2 Flute - Teknik Makina
Benefit from a robust combination of 20 mm shank stability, internal coolant and secure insert clamping for predictable milling performance; order the cutter via Metav Werkzeuge or consult our specialists for application-specific guidance. Shank milling cutter S849TM for BOMT 1304 Indexable Inserts — 20 mm shank, internal coolant (Teknik Makina) A Shank milling cutter S849TM built for indexable-insert milling with through-tool coolant and compact overall length for versatile workshop use 20 mm shank diameter Internal coolant supply Compatible with BOMT 1304 inserts Ingersoll-compatible clamping system Reliable rigidity for consistent surface quality The 20 mm shank and compact 90 mm overall length deliver a stable toolholder connection that reduces vibration and runout, which in turn improves repeatability and surface finish in serial milling tasks. With a 40 mm cutting length and two cutting edges, this milling body is designed for steady material removal while keeping clamping forces straightforward to manage. The result is a reduction in scrap and rework costs due to fewer dimensional deviations during long production runs. Optimised coolant flow to extend insert life Equipped with internal coolant, the cutter directs cooling fluid close to the cutting zone to support effective chip evacuation and reduce thermal loading on the cutting edges. This targeted coolant delivery helps maintain cutting-edge geometry and can increase indexable-insert longevity under consistent cutting conditions. For applications requiring reliable heat management, the internal supply is a practical means to protect inserts and maintain cutting performance throughout extended cycles. Fast, secure insert changes minimise downtime Insert retention is secured via a T10 Torx screw (M3.5x8.5), enabling precise, repeatable clamping and quick exchange of BOMT 1304 inserts. The straightforward screw-and-pocket arrangement reduces maintenance time on the shop floor and simplifies spare-part logistics. Combined with the cutter’s modest mass (approx. 0.105 kg), the design supports efficient handling during tool set-up and replacement, helping to keep machine uptime high and throughput consistent. Compatibility and service advantages for production planning The tool is compatible with BOMT 1304 indexable inserts and the clamping geometry matches Ingersoll specifications, allowing straightforward integration into existing tooling inventories. Sourcing the cutter through Metav Werkzeuge provides the benefits of centralised stock, technical filtering and reliable supply from an established European hub. Clear mechanical specifications and standardised fastening components mean fewer special parts and easier procurement planning for production managers. For tailored advice on integrating the Teknik Makina S849TM into specific machining processes or to confirm lead times and availability from Metav Werkzeuge in Emmerich, please contact our technical consultants by email at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data SKU: S849TM Manufacturer: Teknik Makina Product: Shank milling cutter ECLASS: 21180806 Facts Diameter: 20 mm Shank diameter: 20 mm Overall length: 90 mm Cutting length: 40 mm Cutting edges: 2 Weight: 0.105 kg Torx key: T10 Torx screw: M3.5x8.5 Special features Internal coolant (through-tool) For BOMT 1304 indexable inserts Compatible with Ingersoll insert clamping Compact design for stable clamping FAQ Which inserts fit this cutter? The cutter accepts BOMT 1304 indexable inserts; the clamping geometry is compatible with Ingersoll-style insert systems. Is the coolant internal or external? This shank milling cutter features internal coolant, supplying fluid directly through the tool to the cutting zone. What fastening hardware is required for inserts? Inserts are secured with a T10 Torx screw, size M3.5x8.5, ensuring repeatable and secure clamping. How many cutting edges does the tool provide? The tool body is configured with two cutting edges, optimised for stable material removal and straightforward balancing. Can this cutter be used in existing tool holders? With a 20 mm shank diameter and standard clamping profile, the cutter integrates into holders that accept a 20 mm shank and provide adequate axial support. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Solid Shank Face Mill For APKT 0903 Indexable Inserts, 90° Cutting Angle, 3 Flutes, 45mm Cutting Length - Teknik Makina
Benefit from a combination of secure clamping and rapid insert changes that keep machining cycles efficient and predictable; the 20 mm shank and 45 mm cutting length deliver stable performance for medium-deep milling. Order the tool directly via Metav Werkzeuge or consult the team for application advice. S212TM insert milling cutter — 20 mm shank, for APKT 0903 indexable inserts (Teknik Makina) The S212TM is an insert milling cutter engineered for efficient side milling and pocketing operations using APKT 0903 indexable inserts. 20 mm shank diameter for stable clamping 45 mm cutting length for medium-deep cuts Compatible with APKT 0903 inserts (Walter) Stable clamping for consistent machining results A solid 20 mm shank and a total length of 150 mm overall length provide the mechanical stability required for repeatable milling runs. The tool’s mass (approx. 0.354 kg) and balanced geometry reduce chatter during intermittent cuts, so process windows remain predictable. For production environments this translates into fewer scrapped parts and smoother cycle times, with one clear benefit per setup: improved surface finish without compromising feed rates. Fast insert changes cut downtime Compatibility with APKT 0903 indexable inserts ensures access to widely available grades and geometries. Inserts are secured with an M2.5x7 Torx screw and released with a T8 key for quick replacement; the simple fastening logic reduces changeover time and minimises handling errors. For shops that run multiple part variants, the consequence is straightforward — faster tool service procedures and lower per-part handling costs. Productivity engineered for productive cuts With a 45 mm cutting length and a 90° cutting angle, the cutter is aimed at efficient face and slot milling where axial engagement is moderate and radial engagement varies. The three-edge design supports steady chip removal and makes it easier to maintain cutting parameters across a batch. In plain terms, the geometry converts into a single operational advantage per pass: consistent material removal while preserving insert life. Clear application fit and operational ease Designed for industrial workshops, job shops and maintenance departments, the cutter matches common machining tasks that require reliable insert performance and straightforward tool handling. Its compatibility with Walter-manufactured inserts widens the choice of grades for differing materials and finishes. If further clarification on mounting or insert grade selection is required, Metav Werkzeuge provides application guidance to align the tool’s characteristics with the production objective. For procurement or technical assistance with the Teknik Cutting Tools S212TM insert milling cutter, contact Metav Werkzeuge in Emmerich for fast supply and expert application support at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: S212TM Manufacturer: Teknik Makina Designation: insert milling cutter for APKT 0903 indexable inserts Compatible inserts: APKT 0903 (Walter) ECLASS: 21180806 ETIM: EC011860 Facts Shank diameter: 20 mm Cutting length: 45 mm Diameter: 20 mm Overall length: 150 mm Number of cutting edges: 3 Weight: 0.354 kg Cutting angle: 90° Torx screw: M2.5x7 Torx key size: T8 Special features Compatible with Walter APKT 0903 inserts Fastening with M2.5x7 Torx screw Three cutting edges Designed for insert change efficiency FAQ Which inserts fit this milling cutter? The S212TM accepts APKT 0903 indexable inserts; Walter-compatible insert geometries are supported for flexible grade selection. How are inserts secured and which tool is required? Inserts are fixed with an M2.5x7 Torx screw; a T8 Torx key is used to tighten and release inserts for the S212TM. What are the main dimensions to consider when setting up the tool? Key dimensions for the S212TM are a 20 mm shank diameter, 45 mm cutting length and 150 mm overall length, which determine clamping and reach. How many cutting edges does the tool have and what is the advantage? The S212TM has three cutting edges, supporting steady chip evacuation and balanced cutting forces for stable material removal. Is the S212TM suitable for quick changeovers in a production setting? Yes, the simple Torx fastening and standard APKT 0903 inserts make the S212TM well suited to rapid insert exchange and streamlined tool servicing. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Solid Shank Face Mill For R390 11T3 Indexable Inserts With Coolant Through, 40mm Cutting Length - Teknik Makina
Take advantage of the precise combination of a compact 20 mm shank, integrated internal coolant and compatibility with Sandvik R390 11T3 indexable inserts for reliable small-diameter milling. Order the tool directly via Metav Werkzeuge or consult our specialists for integration into production setups. Shank milling cutter S592-3TM — 20 mm shank, internal coolant, for R390 11T3 indexable inserts (Teknik Makina) The Shank milling cutter S592-3TM is a compact milling body designed for use with R390 11T3 indexable inserts, offering internal coolant delivery and a slim 20 mm shank for precision finishing and light shoulder milling applications. 20 mm shank diameter Internal coolant for chip control Compatible with Sandvik R390 11T3 inserts High-performance small-diameter milling for consistent results The tool delivers repeatable performance in tight-tolerance milling tasks thanks to its 20 mm shank and a total length of 120 mm, which balance accessibility with rigidity. The cutter body accepts the widely used R390 11T3 indexable inserts, enabling quick insert changes and predictable cutting behaviour. With three cutting edges, the tool maintains stable chip load and smooth cutting action, making it suitable for finishing passes or light shoulder operations where vibration must be minimised. The compact geometry reduces overhang while the robust construction supports high-speed machining where appropriate. Effective coolant routing extends tool life and improves surface quality Integrated internal coolant directs cutting fluid to the cutter-to-insert interface, improving chip evacuation, reducing heat at the cutting zone and prolonging insert life. This feature helps to maintain consistent surface finish and reduces the need for frequent index changes during longer runs. For production environments aiming to reduce downtime, the coolant feed lowers thermal stress on the insert and tool body, which contributes to lower tooling costs per component and fewer unscheduled interruptions. Practical compatibility and service-friendly design Designed for compatibility with Sandvik R390 11T3 inserts, the cutter simplifies stock keeping and tool setup across mixed-machine fleets. The tool uses an M2.5x7 fixing screw with a Torx T8 interface, enabling secure clamping and quick replacement with standard workshop tools. The 40 mm cutting length provides sufficient engagement for many common operations without excessive overhang, and the lightweight construction (approx. 0.271 kg) makes handling and presetting straightforward on tool-room equipment. The combination of standard insert format and user-friendly fastening promotes efficient changeovers and predictable process stability. For supply and technical advice on the Teknik Makina S592-3TM with internal coolant and Sandvik R390 11T3 compatibility, contact Metav Werkzeuge for personalised recommendations and reliable dispatch from Emmerich Technical data Article number: S592-3TM Product type: Shank milling cutter Manufacturer: Teknik Makina Core data Diameter: 20 mm Overall length: 120 mm Shank diameter: 20 mm Cutting length: 40 mm Cutting edges: 3 Weight: 0.271 kg ECLASS: 21180806 Special features Internal coolant Compatible with R390 11T3 indexable inserts (Sandvik) Fixing screw: M2.5x7 (Torx T8) Torx key: T8 FAQ Is this cutter compatible with Sandvik R390 11T3 inserts? Yes. The S592-3TM milling body is designed for use with R390 11T3 indexable inserts from Sandvik, ensuring standard insert interchangeability and consistent mounting. Does the tool provide internal cooling? Yes. The cutter includes an internal coolant channel that directs fluid to the cutting zone for improved chip evacuation and thermal control during machining. What are the shank and overall dimensions of the tool? The tool features a 20 mm shank diameter and a 120 mm overall length, with a 40 mm cutting length suitable for many finishing and light shoulder-milling tasks. How many cutting edges does the cutter have and what is the benefit? The cutter has three cutting edges, which helps maintain a stable chip load, smoother cutting action and predictable material removal for fine surface finishes. Which screw and key are required to mount the inserts? Mounting uses an M2.5x7 screw secured with a Torx T8 key, providing secure clamping and straightforward insert changes. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
21mm Chamfer Mill 45° For TWX 16R Inserts, 20mm Shank 50mm Cutting Height, 110mm Overall Length - Teknik Makina
Take advantage of consistent 45° chamfering, a robust 20 mm shank and direct compatibility with Korloy TWX 16R indexable inserts for efficient bevel production; order directly via Metav Werkzeuge or consult our specialists for application advice. Chamfer mill S352TM — indexable‑insert cutter with 45° chamfer, Ø 21 mm (Teknik Makina) The Chamfer mill S352TM is a compact indexable‑insert cutter for producing precise 45° bevels, optimised for TWX 16R inserts and routine workshop milling tasks. 45° chamfer angle Shaft Ø 20 mm Compatible with TWX 16R inserts Overall length 110 mm Accurate chamfering for reduced rework The tool delivers a consistent 45° chamfer, achieved by the cutter geometry and the single cutting edge design. With an external diameter of 21 mm and a cutting height of 50 mm, the cutter produces repeatable bevels that reduce secondary operations and scrap. This precision is suitable for batch production as well as single‑part finishing, where predictable edge quality shortens inspection cycles and supports process stability. Quick insert changes and straightforward clamping Insert retention is secured by a Torx screw M4x11, tightened with a T8 key, enabling quick replacement of worn inserts and minimising machine downtime. The solid 20 mm shank fits standard collets and contributes to stable toolholding, while the modest weight of 0.26 kg simplifies handling during tool changes. These features together support an efficient workflow and lower total processing time per chamfered edge. Flexible usage and supply advantages for workshops Designed for use with TWX 16R indexable inserts (Korloy), the cutter offers flexibility in sourcing and inventory management. Using a standard insert size allows workshops to stock fewer variants while maintaining process capability. The compact overall length of 110 mm makes the cutter suitable for many CNC milling set‑ups and manual milling operations, delivering a balance of accessibility and machining performance for daily workshop demands. For ordering, technical consultation or supply options for the Teknik Makina Chamfer mill S352TM, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for the intended application Technical data Article number: S352TM Manufacturer: Teknik Makina Diameter: 21 mm Cutting height: 50 mm Shank diameter: 20 mm Overall length: 110 mm Cutting edges: 1 Chamfer angle: 45° Weight: 0.26 kg For indexable inserts TWX 16R Compatible insert manufacturer: Korloy Torx screw: M4x11 Torx key: T8 FAQ Which insert type is required for this chamfer cutter? The chamfer cutter accepts TWX 16R indexable inserts; the design is compatible with inserts from Korloy. What chamfer angle does the cutter produce? The tool is configured for a 45° chamfer, providing standard bevels for general finishing and edge preparation. How are the inserts secured in the cutter? Inserts are fixed with a Torx screw M4x11, which is tightened or released using a T8 key for rapid insert changes. What shank size is required for mounting? The cutter has a 20 mm shank diameter and is intended for collets or holders that accept a 20 mm shank. Can the cutter be used in compact machine setups? Yes, the overall length of 110 mm and the compact head dimensions make the tool suitable for many CNC and manual milling configurations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
21mm Cutter for BLMP 0603 Indexable Inserts 150mm Overall Length, 40mm Cutting Length - Teknik Makina
Take advantage of a compact, 21 mm diameter cutter with a 20 mm shank and a 40 mm cutting length for reliable, repeatable insert milling; order directly via Metav Werkzeuge or contact our consultants for tailored application advice. Shank milling cutter S479-4TM — 21 mm diameter, for BLMP 0603 indexable inserts (Teknik Makina) The Shank milling cutter S479-4TM is a robust tool intended for precision milling with BLMP 0603 indexable inserts, offering a compact profile that suits tight set-ups and versatile face or slot applications. 21 mm diameter for compact machining 20 mm shank for secure clamping Compatible with BLMP 0603 Taegutec inserts Secure clamping for repeatable accuracy The cutter’s 20 mm shank is designed for firm retention in standard holders and collets, so clamping forces are distributed evenly and runout is minimised. Compatibility with BLMP 0603 indexable inserts ensures a standardised insert geometry, which facilitates fast index changes and consistent cutting geometry. The use of a T8 Torx key and M3x6.2 fastening screws provides a secure fastening method that is widely adopted in industry and reduces the risk of loosening under intermittent loads. This construction gives a dependable basis for repeatable part quality in series production. Compact tool body for efficient machining and handling With a nominal diameter of 21 mm, 40 mm cutting length and 150 mm total length, the tool balances cutting capacity and reach for a variety of milling tasks while keeping overhang limited. The three cutting edges allow for a steady material removal rate with predictable chip flow, and the tool’s modest mass (approx. 0.348 kg) reduces centrifugal effects at higher spindle speeds and improves operator handling during tool changes. The practical combination of dimensions and the indexable-insert system supports cost-efficient maintenance: worn inserts are replaced rather than the entire tool, lowering lifetime tooling costs and shortening downtime between operations. Seamless integration into production workflows Designed for straightforward implementation in established machining cells, this cutter accepts inserts from recognised manufacturers such as Taegutec, enabling flexible sourcing and supply security. The compact design supports close-quarter setups and fixtures commonly found in jobbing shops and subcontracting environments. Supplied under SKU S479-4TM, the tool is compatible with standard insert retention hardware and utilises common workshop tools for maintenance, reducing training effort. For further specification sheets or application guidance, Metav Werkzeuge provides technical advice and assured supply from Emmerich, ensuring straightforward procurement and reliable delivery. For application-specific recommendations or to secure stock of the Teknik Makina S479-4TM shank milling cutter, contact Metav Werkzeuge for expert guidance and swift supply from Emmerich. Technical data SKU: S479-4TM Manufacturer: Teknik Makina Product type: Shank milling cutter Facts Diameter: 21 mm Total length: 150 mm Weight: 0.348 kg Shank diameter: 20 mm Cutting length: 40 mm Cutting edges: 3 Special features For BLMP 0603 indexable inserts Compatible with Taegutec inserts Torx key: T8 Torx screw: M3x6.2 FAQ Which inserts fit this cutter? The cutter is designed for BLMP 0603 indexable inserts; inserts from Taegutec that match BLMP 0603 geometry are compatible. What shank size is required for clamping? A 20 mm holder or collet is required to secure the 20 mm shank for optimal concentricity and stability. What are the tool’s overall and cutting lengths? The tool has a 150 mm total length and a 40 mm cutting length, providing modest reach with limited overhang. How is the insert fastened to the tool? Inserts are secured with an M3x6.2 screw tightened using a T8 Torx key to ensure a reliable connection. Is this cutter suitable for close-tolerance production runs? Yes, the combination of a compact body, defined shank diameter and standardised BLMP 0603 inserts allows the cutter to be used in repeatable, close-tolerance milling operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
21mm End Mill for 3PKT 1004 Indexable Inserts L200mm With Internal Coolant - Teknik Makina
Take advantage of the combination of robust compatibility with 3PKT 1004 indexable inserts, internal coolant for stable chip evacuation, and a compact 20 mm shank for secure clamping; order the tool directly via Metav Werkzeuge or contact our consultants for application advice. Indexable Milling Cutter S485-1TM for 3PKT 1004 – 21 mm diameter, internal coolant (Teknik Makina) A versatile Indexable Milling Cutter S485-1TM engineered to hold 3PKT 1004 inserts for heavy-duty finishing and efficient material removal across a range of milling operations. 21 mm cutting diameter Internal coolant supply 20 mm shank diameter for solid clamping Compatible with Taegutec 3PKT 1004 inserts Optimised cutting stability and process reliability The holder is designed to deliver consistent cutting performance by combining a 21 mm diameter body with a balanced geometry and coolant-fed cutting zone. The internal coolant channel reduces thermal load at the edge and improves chip evacuation, which stabilises tool life and lowers the risk of built-up edge. With two cutting edges the cutter offers predictable engagement and reduced vibration compared with more complex multi-flute systems, making it suitable where reproducible finishes and cycle-time stability are required. These technical choices yield measurable process reliability and make the tool an efficient element of a production cell. Practical handling and secure set-up for fast changeovers Set-up efficiency is supported by a 20 mm shank that fits standard collets and holders, combined with a robust clamping interface that contributes to high run-out stability during spindle rotation. The holder uses a Torx retention screw (T8) with specification M2.5x7, enabling quick insert changes while maintaining repeatable seating. The tool’s dimensions — 200 mm overall length with a 30 mm cutting length — provide a sensible balance between reach and rigidity for common milling tasks. These features reduce fixture adjustments and accelerate tool replacement, lowering downtime and simplifying workshop logistics. Proven compatibility and application-focused design Specifically built for 3PKT 1004 indexable inserts and compatible with Taegutec grades, the cutter allows users to select insert geometries and coatings that match the workpiece and cutting strategy. The modular insert system reduces long-term tooling costs because only the insert needs replacing when worn. The S485-1TM’s combination of coolant capability and a compact shank makes it suitable for finishing and light roughing across many materials where indexed inserts are preferred for economy and flexibility. For production environments seeking reproducible results and cost-effective wear management, the tool offers a pragmatic solution. For tailored guidance on integrating the Teknik Cutting Tools S485-1TM into a specific machining process or to secure immediate supply from Metav Werkzeuge in Emmerich, contact us at info@metav-werkzeuge.com or call +49 2822 7131930 for direct support and procurement. Technical data SKU: S485-1TM UID: S485-1TM Manufacturer: Teknik Makina Facts Cutting diameter: 21 mm Shank diameter: 20 mm Overall length: 200 mm Cutting length: 30 mm Number of cutting edges: 2 Weight: 1.259 kg Torx key: T8 Torx screw: M2.5x7 Internal coolant: yes Special features For indexable inserts type 3PKT 1004 Compatible with Taegutec inserts Designed for insert change with Torx retention screw Balanced geometry for reduced vibration FAQ What inserts fit this milling cutter? The Indexable Milling Cutter S485-1TM accepts 3PKT 1004 indexable inserts and is specified for use with Taegutec-compatible grades. Does the tool support through-coolant supply? Yes, the cutter features internal coolant that delivers lubricant to the cutting zone for improved chip control and tool life. What are the shank and overall dimensions? The tool has a 20 mm shank and a 200 mm overall length, with a 21 mm cutting diameter and 30 mm cutting length. How are inserts secured in the tool? Inserts are retained with a Torx screw; the drive size is T8 and the screw specification is M2.5x7, enabling secure and repeatable clamping. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
21mm End Mill For LNMU 0303 Indexable Inserts 150mm Overall With Internal Coolant - Teknik Makina
Take advantage of the combination of precise insert compatibility, internal coolant and a compact 20 mm shank for reliable milling performance; order directly via Metav Werkzeuge or consult our specialists for application advice. Shank milling cutter S674-1TM – 21 mm for LNMU 0303 indexable inserts, internal coolant (Teknik Makina) A Shank milling cutter S674-1TM crafted for use with LNMU 0303 indexable inserts, offering internal coolant and a compact profile for versatile milling and straightforward insert changes 21 mm cutting diameter Internal coolant for reliable chip evacuation Compatible with LNMU 0303 indexable inserts 20 mm shank, 3 cutting edges Productivity through proven insert compatibility The milling system is tuned for productive results by using the widely adopted LNMU 0303 insert family; this ensures consistent cutting geometry and repeatable results across serial production. With a 21 mm diameter and three cutting edges, the design balances material removal rate and surface finish, reducing cycle times while maintaining dimensional stability. The modular insert concept simplifies inventory and reconditioning: worn edges are replaced rather than the whole tool, which lowers lifecycle cost and keeps machine uptime high. Stable machining with internal coolant and controlled chip flow Integrated internal coolant directs lubricant and coolant precisely to the cutting zone, improving flank wear behaviour and aiding chip evacuation in through-tool flow operations. This targeted cooling reduces thermal deformation and extends insert life, especially during medium- to high-feed roughing passes. The result is fewer tool changes and more predictable component tolerances, an important advantage for job shops and production lines aiming for consistent first-pass yield. Compact design for easy handling and reliable set-up A 20 mm shank and a 150 mm overall length deliver a compact footprint that suits smaller spindles and tight set-ups while retaining sufficient reach for many applications. The tool features a T8 Torx interface and M2.5x7 screws for secure insert fastening, enabling quick, repeatable insert changes with standard workshop keys. Supplied weight and dimensions support straightforward balancing and fixture planning, helping to integrate the cutter into existing toolholders without extensive adaptation. Contact Metav Werkzeuge for tailored technical advice on integrating the S674-1TM into existing workflows and to confirm insert compatibility for specific materials and machining conditions. Technical Data Article number: S674-1TM Manufacturer: Teknik Makina Product type: Shank milling cutter Facts Cutting diameter: 21 mm Shank diameter: 20 mm Overall length: 150 mm Cutting length: 50 mm Number of cutting edges: 3 Weight: 0.389 kg Internal coolant: yes Torx key: T8 Torx screw: M2.5x7 Special features For LNMU 0303 indexable inserts Compatible with Tungaloy insert system Internal coolant feed Compact 20 mm shank design FAQ What insert type is required for this cutter? The shank milling cutter S674-1TM uses LNMU 0303 indexable inserts and is compatible with Tungaloy insert systems for straightforward sourcing and replacement. Is through-tool coolant integrated in the design? Yes, the S674-1TM from Teknik Makina features internal coolant, providing targeted cooling to the cutting zone to improve tool life and chip control. Which shank and cutting diameters are available for this model? This model has a 21 mm cutting diameter and a 20 mm shank, with a 150 mm overall length and 50 mm cutting length suitable for compact setups. How many cutting edges does the cutter have and what is the fastening method? The cutter has three cutting edges and uses M2.5x7 Torx screws tightened with a T8 Torx key for secure insert clamping. Is the S674-1TM suitable for production environments with frequent tool changes? Yes, the insert-based concept of the S674-1TM keeps replacement and maintenance quick, minimising downtime and supporting high machine utilisation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
21mm End Mill For LNMU 0303 Indexable Inserts, 3 Flutes, 150mm Overall Length - Teknik Makina
Take advantage of a compact design that combines a Ø21 mm cutting diameter, three cutting edges and a robust 20 mm shank for steady machining and predictable chip control; order the cutter directly via Metav Werkzeuge or ask our consultants for application advice. Insert milling cutter S674TM by Teknik Makina — Ø21 mm, 3 cutting edges The insert milling cutter S674TM is a precision cutter body engineered for LNMU 0303 indexable inserts, intended for stable face and peripheral milling where fast insert replacement and repeatable tool set-up are required Designed for LNMU 0303 indexable inserts Cutting diameter Ø21 mm Three cutting edges for stable removal 20 mm shank with Torx screw M2.5x7 Stable cutting performance for predictable results The S674TM body delivers consistent cutting performance through its three-flute arrangement and carefully proportioned geometry. The combination of a Ø21 mm cutting diameter and 3 cutting edges contributes to even load distribution across the tool, reducing vibration and promoting a regular surface finish. In practice, this means fewer rework cycles and more predictable cycle times on repetitive milling operations. The indexable system decouples cutting-edge wear from the holder, allowing quick replacement of worn inserts and minimising machine downtime. Designed for straightforward compatibility and quick servicing Compatibility is central to the design: the cutter body accepts LNMU 0303 indexable inserts and is fitted using a Torx M2.5x7 fixing with a T8 key, enabling fast, repeatable clamping. The 20 mm shank ensures secure clamping in standard toolholders and provides rigid support during moderate axial and radial engagement. Clear mechanical interface standards reduce set-up time on the shop floor and simplify inventory management for insert and screw spares. The modular approach supports predictable maintenance intervals and a rapid return to production after insert changes. Practical advantages for workshop efficiency As a purpose-built cutter body, the S674TM supports operational efficiency by separating the cutting edge from the holder: worn inserts are exchanged instead of replacing complete cutters, which lowers tooling costs over time and accelerates recovery from edge wear. The compact Ø21 mm diameter and medium overall length make the tool well suited to confined work envelopes and operations where accessibility is a concern. For procurement and planning, the visible mechanical specification—shank Ø 20 mm, insert type LNMU 0303 and Torx fixing—facilitates exact matching with existing toolholders and spare-part lists, helping to reduce unnecessary stock and avoid compatibility issues. Contact Metav Werkzeuge for availability and technical guidance on the Teknik Makina S674TM insert milling cutter; call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored application support Technical data Article number: S674TM Manufacturer: Teknik Makina Compatible inserts: LNMU 0303 Compatible insert manufacturer: TNGLY-OKE Torx screw: M2.5x7 Torx key size: T8 Facts Cutting diameter: 21 mm Overall length: 150 mm Shank diameter: 20 mm Number of cutting edges: 3 SKU: S674TM eClass: 21180806 ETIM: EC011860 Special features Insert milling cutter body for LNMU 0303 indexable inserts Torx M2.5x7 fixing for secure insert clamping 20 mm shank for standard toolholders Manufacturer: Teknik Makina Designed for quick insert replacement and reduced downtime FAQ What insert type does this cutter accept? The cutter accepts LNMU 0303 indexable inserts; the S674TM by Teknik Makina is built specifically for that insert format and for quick insert changes. Which shank diameter is supplied with the tool body? The tool body features a 20 mm shank diameter, allowing secure mounting in compatible holders and providing the rigidity expected for the S674TM milling body. How are the inserts secured to the cutter? Inserts are secured with a Torx M2.5x7 screw; a T8 key is used for tightening and loosening to ensure repeatable clamping torque. Is this cutter suitable for compact workspaces? Yes; with a Ø21 mm cutting diameter and an overall length of 150 mm, the S674TM is suited to operations that require a compact tool profile and good accessibility. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
21mm End Mill for R390 11T3 Indexable Inserts Internal Coolant, 150mm Length - Teknik Makina
Take advantage of a compact, high‑precision milling solution that combines a 21 mm cutting diameter, internal coolant and proven insert compatibility for reduced setup time and consistent surface finish; order directly via Metav Werkzeuge or consult our specialists for technical advice. Shaft milling cutter S594-2TM — 21 mm diameter with internal coolant (Teknik Makina) A robust Shaft milling cutter S594-2TM designed for high‑precision milling tasks using R390 11T3 indexable inserts, suitable for production environments and workshop milling operations. 21 mm cutting diameter, compact design Internal coolant for improved chip evacuation Compatible with R390 11T3 inserts (Sandvik) 20 mm shank, 150 mm overall length Improved process stability with compact diameter and proven insert system The compact 21 mm cutting diameter delivers a balance between rigidity and accessibility, making the tool effective in confined setups and multi‑axis stations. Compatibility with R390 11T3 indexable inserts ensures a wide choice of cutting grades and geometries, which reduces tool change frequency and keeps production moving. The three‑edge configuration provides stable cutting progression; wear is localised to the insert so downtimes are minimised and repeatability across batches is enhanced. Enhanced cooling and chip control for longer tool life Equipped with internal coolant, the cutter channels cutting fluid directly to the cutting zone to improve lubrication and temperature control. This targeted cooling reduces thermal load on the insert and holder, promoting more consistent tool life and better surface integrity. For manufacturers looking to raise throughput without compromising finish, the internal supply supports higher metal removal rates and aids reliable chip evacuation from narrow pockets. Practical mounting and service features for efficient handling The tool is supplied with a 20 mm shank and a total length of 150 mm, with a cutting length of 50 mm, enabling secure clamping in standard toolholders and giving sufficient reach for many slotting and face‑milling tasks. The cutter uses a Torx T8 key and M2.5×5.5 screws for insert clamping, which simplifies replacement and repeatable seating. At 0.366 kg it combines manageable handling with the mass needed to dampen chatter in bench and production milling operations. Workflow advantages through interchangeable inserts and supplier compatibility Designed as an insert milling tool, this cutter reduces per‑part machining costs by allowing worn cutting edges to be replaced without switching the whole body. Compatibility with Sandvik inserts and standardised fixing hardware means inserts are widely available, simplifying procurement and stocking. Teknik Makina’s manufacturing tolerances ensure concentricity and balance are maintained, which improves cycle consistency and reduces inspection effort on repetitive batches. Contact Metav Werkzeuge today to discuss Teknik Makina’s S594-2TM with internal coolant for optimised milling workflows; Metav Werkzeuge’s consultants in Emmerich can advise on insert selection and delivery options suited to the intended application. Technical data SKU: S594-2TM Product: Shaft milling cutter for R390 11T3 indexable inserts Manufacturer: Teknik Makina Dimensions & weights Cutting diameter: 21 mm Overall length: 150 mm Shank diameter: 20 mm Cutting length: 50 mm Weight: 0.366 kg Number of cutting edges: 3 Features & compatibility Internal coolant: yes Compatible inserts: R390 11T3 Compatible insert manufacturer: Sandvik Torx key: T8 Torx screw: M2,5x5,5 Product type: Shaft milling cutter FAQ What inserts fit this cutter? The cutter accepts R390 11T3 indexable inserts; insert grades and chipformers from Sandvik are compatible with the S594-2TM. Is coolant supply integrated? Yes — the tool features internal coolant that supplies fluid directly to the cutting edge to support cooling and chip evacuation. Which shank and holder size is required? A 20 mm shank is provided; the S594-2TM is intended for standard holders that accept a 20 mm tool shank and secure clamping. How long is the cutting portion of the tool? The cutter has a cutting length of 50 mm within a 150 mm overall length, offering reach for both face and light slot milling operations. How many cutting edges are used and how are they changed? Three cutting edges are used; inserts are clamped with an M2.5×5.5 screw operated with a Torx T8 key for straightforward replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
21mm End Mill for XNKT 0604 Indexable Inserts With Internal Cooling, 150mm - Teknik Makina
Benefit from a rigid 20 mm shank, internal coolant and compatibility with XNKT 0604 Korloy inserts for reliable, repeatable milling. Order the tool directly via Metav Werkzeuge or consult our specialists for machining advice. Indexable-insert milling cutter S836-1TM – 21 mm, internal coolant (Teknik Makina) Indexable-insert milling cutter S836-1TM for XNKT 0604 indexable inserts, built to combine rigidity and coolant-through performance for demanding workshop milling tasks 21 mm cutting diameter with 20 mm shank Internal coolant for improved chip evacuation Compatible with XNKT 0604 Korloy inserts Robust 150 mm overall length, 40 mm cutting depth Stable geometry for consistent metal removal The S836-1TM tool is engineered around a 21 mm diameter body and a 20 mm shank to deliver the rigidity required for accurate pocketing and face milling. With a 150 mm overall length and a 40 mm cutting length, the design balances reach and stability to reduce chatter and maintain tolerances. The use of two cutting edges minimises cutting forces and supports steady material removal, which leads to improved surface finish and consistent dimensional results in repeated production runs. Coolant-through design and secure insert clamping A central benefit of this shank-mounted cutter is the internal coolant channel that delivers fluid directly to the cutting zone, supporting chip control and thermal management during prolonged cycles. The cutter accepts XNKT 0604 indexable inserts and is specified to work with Korloy inserts, giving rapid regrinding or indexing options without retooling the holder. Insert fixation is achieved with an M3x7 Torx screw, tightened with a T8 key, allowing secure clamping and quick servicing to reduce machine downtime. Practical advantages for workshop and production environments By combining a standardised insert type with coolant-through capability, this tool supports flexible tooling strategies and reduces inventory complexity. The adaptable holder lets job shops and industrial workshops switch grades of inserts for different materials while retaining the same mounting system. The overall package aims to shorten set-up times and improve process reliability, making the cutter a pragmatic choice for production-focused teams seeking stable milling performance. Contact Metav Werkzeuge for application-specific guidance or to request the Teknik Cutting Tools S836-1TM milling cutter with internal coolant and XNKT 0604 compatibility. Technical data SKU: S836-1TM Product type: Milling cutter (indexable insert) Brand: Teknik Makina ECLASS: 21180806 Facts Diameter: 21 mm Shank diameter: 20 mm Overall length: 150 mm Cutting length: 40 mm Weight: 0.372 kg Cutting edges: 2 Torx key: T8 Torx screw: M3x7 Special features Internal coolant: yes Compatible inserts: XNKT 0604 indexable inserts Suitable insert manufacturer: Korloy Label: 21mm Schaftfräser XNKT 0604 L150mm mit Innenkühlung SKU / UID: S836-1TM FAQ Which insert type is required for this cutter? The S836-1TM accepts XNKT 0604 indexable inserts; Korloy-produced XNKT 0604 grades are compatible with this holder. Does the tool provide coolant-through capability? Yes, the cutter features internal coolant to support chip evacuation and thermal control at the cutting edge. What are the shank and overall dimensions? The tool has a 20 mm shank, 21 mm cutting diameter, 150 mm overall length and 40 mm cutting length, supplied as SKU S836-1TM. For which machining tasks is this cutter suited? The cutter is intended for indexable-insert milling operations such as face milling and slotting where a compact 21 mm diameter tool with coolant-through performance is needed. How is an insert secured and replaced? Inserts are clamped with an M3x7 Torx screw tightened using a T8 key; the indexable design permits rapid replacement of the insert without removing the holder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
21mm Schaftfräser für 4NKT 06 L200mm mit Innenkühlung, Torx T8 Schraube M3x6,2 - Teknik Makina
Schaftfräser für 4NKT 06 Wendeplatten Der Schaftfräser für 4NKT 06 Wendeplatten ist ein kraftvolles Werkzeug für präzise Fräsaufgaben mit Innenkühlung und langer Schaftlänge für tiefe Eingriffe Innenkühlung für bessere Spanabfuhr Passend für Taegutec 4NKT 06 Wendeplatten Schaftdurchmesser 20 mm für stabile Aufnahme Drei Schneiden für ruhigen Lauf Gesamtlänge 200 mm für tiefes Arbeiten Präzise Kühlung reduziert Werkzeugverschleiß und verbessert Prozesssicherheit Die integrierte Innenkühlung leitet Kühlschmierstoff direkt an die Schneidzone und sorgt dadurch für konstante Schnittbedingungen. Das reduziert thermische Belastungen an der Schneide und verringert Kontaktverschleiß, was die Standzeit der Wendeschneidplatten verbessert. Auf diese Weise bleibt die Schnittqualität über längere Werkstücke erhalten, und die Prozesssicherheit bei tiefen Fräsungen steigt deutlich. Stabile Aufnahme und Laufruhe für hochwertige Oberflächen Der Schaftdurchmesser 20 mm bietet eine formstabile Aufnahme im Werkzeughalter und minimiert Schwingungen bei hohen Vorschüben. Die Kombination aus drei Schneiden und einer Schneidenlänge von 25 mm ermöglicht ruhigen Lauf und gleichmäßige Spanbildung, wodurch die Oberflächen nach dem Fräsen feiner ausfallen. Diese Auslegung unterstützt effiziente Bearbeitungen bei mittleren bis anspruchsvollen Schnittbedingungen. Montage und Handling: Torx Schraube und Werkzeugzugang Die Befestigung der Wendeschneidplatten erfolgt über eine Torx Schraube M3x6,2, die mit einem Torx Schlüssel T8 sicher angezogen wird. Dieser Schraubentyp erlaubt raschen Plattenwechsel und reproduzierbares Anzugsdrehmoment, was Rüstzeiten reduziert. Das klare Schraubensystem erleichtert Wartung und Ersatzteillogistik in der Werkstatt und sorgt für schnelle Eingriffe bei wiederkehrenden Produktionsläufen. Kompatibilität mit Wendeschneidplatten und Einsatzhinweis Dieses Werkzeug ist für das Plattenformat 4NKT 06 ausgelegt und wurde so konstruiert, dass es optimal mit Wendeschneidplatten des Herstellers Taegutec zusammenarbeitet. Damit eignet sich der Fräser besonders für Anwender, die Taegutec-Platten nutzen und Wert auf präzise, wiederholbare Ergebnisse legen. Die lange Gesamtlänge von 200 mm erlaubt das Erreichen tiefer Konturen ohne zusätzlichen Sonderhalter. Empfehlung: Für effiziente Zerspanung mit Taegutec Wendeplatten 4NKT 06 empfiehlt sich der Einsatz dieses Schaftfräsers; bei Fragen zur Anwendung oder zur passenden Halterung steht Metav gern zur Verfügung – eMail: info@metav-werkzeuge.com, Telefon: +49 2822 7131930 Produktmerkmale Artikelnummer: S474-1TM Marke: Teknik Makina Bezeichnung: Schaftfräser für 4NKT 06 Wendeplatten Produkttyp: Schaftfräser Fakten Durchmesser: 21 mm Gesamtlänge: 200 mm Schaftdurchmesser: 20 mm Schneidenlänge: 25 mm Anzahl Schneiden: 3 Gewicht: 0,524 kg SKU: S474-1TM Besonderheiten Innenkühlung: Ja (für bessere Spanabfuhr) Passend für Wendeplattenhersteller: Taegutec (Plattenformat 4NKT 06) Torx Schlüssel: T8 Torx Schraube: M3x6,2 FAQ Für welche Wendeschneidplatten ist der Fräser ausgelegt? Der Schaftfräser ist für Wendeschneidplatten im Format 4NKT 06 ausgelegt und wurde speziell auf die Geometrie dieser Platten abgestimmt, um mit Taegutec-Platten optimale Ergebnisse zu erzielen. Ist eine Innenkühlung vorhanden und welche Vorteile bietet sie? Ja, der Schaftfräser verfügt über Innenkühlung; dadurch wird Kühlschmierstoff direkt an die Schneide geführt, Spanabfuhr verbessert und die Standzeit der Wendeschneidplatten verlängert. Wie erfolgt die Montage der Wendeschneidplatten? Die Platten werden mit einer Torx Schraube M3x6,2 befestigt; zum Anziehen wird ein Torx Schlüssel T8 verwendet, was schnellen Plattenwechsel und reproduzierbare Befestigungsfestigkeit ermöglicht. Eignet sich das Werkzeug für tiefe Fräsungen? Durch die Gesamtlänge 200 mm und den stabilen Schaftdurchmesser 20 mm ist der Fräser für tiefere Eingriffe geeignet, solange geeignete Halter und Maschinensteifigkeit gegeben sind. Welche Vorteile bietet die Auslegung mit drei Schneiden? Die Konfiguration mit drei Schneiden sorgt für ruhigen Lauf, gleichmäßige Spanabfuhr und eine verbesserte Oberflächengüte bei fortlaufenden Bearbeitungen. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
21mm Shank Cutter For 4NKT 0603 Indexable Inserts 3 Flutes, 20mm Shank Diameter - Teknik Makina
Take advantage of the rigidity of a Ø21 mm cutter, the secure Shank Ø20 mm, and the quick-change economy of indexable 4NKT06 inserts to maintain throughput with predictable tool life; order the tool directly via Metav Werkzeuge or contact our consultants for application advice. Shank milling cutter S474TM — indexable-insert milling cutter, Ø21 mm, 3-flute (Teknik Makina) The Shank milling cutter S474TM is an indexable-insert cutter designed for general milling operations with replaceable 4NKT06 inserts, offering long reach and stable clamping for industrial machining tasks Compatible with 4NKT06 Taegutec inserts Ø21 mm diameter, 3 cutting edges Shank Ø20 mm, 200 mm overall length Secured with M3x6.5 Torx screw (T8 key) Reliable rigidity for repeatable results The S474TM is built around a Ø21 mm cutting head and a Shank Ø20 mm, which together provide high rigidity and reduced deflection in axial and radial loads. The combination of a short 25 mm cutting length and a 200 mm overall length balances accessibility with stability; long-reach operations remain possible without excessive chatter. Using indexable inserts such as the 4NKT06 type means the cutting geometry can be restored instantly by rotating or replacing an insert, reducing downtime and lowering the ongoing cost per cut compared with solid-tool regrinding. Fast changeover and secure clamping for production environments Clamping is achieved with an M3x6.5 Torx screw tightened using a T8 key, providing a compact, repeatable fastening method that is straightforward to service on the shop floor. The cutter’s three-flute layout delivers a stable cutting sequence and smooth engagement, which is particularly useful when working with interrupted cuts or mixed-geometry components. With a mass of 0.524 kg the tool offers a reassuring mechanical feel during handling and set-up, while the compatibility with Taegutec indexable inserts ensures broad availability of chipbreakers and grades for a variety of workpiece materials. Practical benefits for procurement and maintenance Adopting this style of indexable-insert milling system supports predictable inventory and maintenance planning: spare inserts are low-cost and easy to stock, and the modular design reduces the number of complete cutters required. For purchasing teams the clear separation of cutter body and consumable inserts simplifies cost tracking and extends the service life of the holder. When mounted and set up correctly, the S474TM delivers consistent tool life and repeatable part quality, which in turn helps to optimise cycle times and reduce rework in batch production. Contact Metav Werkzeuge for tailored application recommendations and secure the Teknik Makina S474TM from our Emmerich stock for prompt dispatch Technical data SKU: S474TM Brand: Teknik Makina Designation: Shank milling cutter for 4NKT 0603 Indexable Inserts Facts Diameter: 21 mm Shank diameter: 20 mm Cutting length: 25 mm Overall length: 200 mm Cutting edges: 3 Weight: 0.524 kg Special features Compatible with Taegutec 4NKT06 inserts Secured with M3x6.5 Torx screw (T8 key) Indexable-insert system for quick-change maintenance FAQ How are the inserts secured in the S474TM? The inserts are retained in the cutter body and clamped by the indexable-insert pocket; the cutter itself is secured with an M3x6.5 Torx screw, tightened using a T8 key, ensuring repeatable seating. Which insert type fits the cutter? The S474TM accepts 4NKT06 indexable inserts; the tool is compatible with Taegutec variants in that ISO designation. Is the S474TM suitable for long-reach milling? With a 200 mm overall length and a 25 mm cutting length, the cutter provides extended reach while maintaining reasonable stiffness for typical shop-floor operations. What are the advantages of using indexable inserts with this cutter? Indexable inserts restore cutting geometry quickly, reduce downtime, and lower per-cutting-edge costs compared with regrinding solid tools; the S474TM’s design supports rapid insert changes. Can the cutter be used with different insert grades? Yes, the S474TM accepts standard 4NKT06 insert grades from manufacturers such as Taegutec, allowing selection of grades for wear resistance or toughness according to the workpiece material Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
21mm Shank End Mill For XNEX 0403 Indexable Inserts, 3 Cuts, 150mm Overall Length - Teknik Makina
High rigidity and precise compatibility with XNEX 0403 indexable inserts combine with a 20 mm shank and a 21 mm cutting diameter to deliver stable, efficient milling performance; order and further procurement can be arranged via Metav Werkzeuge or discussed with the technical consultants for integration support. S196TM — Indexable milling cutter, Ø21 mm, 20 mm shank (Teknik Makina) The S196TM is an indexable milling cutter designed for use with XNEX 0403 indexable inserts, optimised for secure insert clamping and reliable machining in CNC and conventional setups. Indexable system for XNEX 0403 inserts 21 mm cutting diameter for medium cuts 20 mm shank for secure toolholding Torx fastening M2.5x7, T8 key Stable insert compatibility for predictable machining results The tool is engineered around the XNEX 0403 insert system to ensure a repeatable clamping interface and reduced setup variation. A 20 mm shank enhances axial stability in standard holders, while the Ø21 mm cutting diameter balances rigidity and accessibility. These design choices result in consistent tool life and predictable cutting behaviour, which supports efficient process planning and reduces unplanned downtime. Efficient material removal with three cutting edges A three-edge geometry provides a consistent chip formation and an even distribution of cutting forces; this leads to smoother surface generation and steady feed performance. The configuration is particularly effective where indexable tooling is preferred for fast insert changes, since the replaceable edges allow for rapid recovery between tool changes and minimise non-productive time. The overall length of 150 mm offers sufficient reach without excessive overhang. Secure fastening and straightforward maintenance Insert retention is achieved via a Torx M2.5x7 fastening system requiring a T8 key, enabling precise torque application and reliable clamping. The fastening concept supports repeatable insert seating, which preserves cutting geometry and extends usable insert life. Where on-site tool service is required, the modular nature of indexable systems simplifies maintenance and reduces the need for specialist regrinding. Integration into production flows and toolholders The cutter’s standard 20 mm shank diameter is compatible with common toolholders and collet systems, while the tool geometry is suited to a range of milling strategies where indexable insert solutions are advantageous. The single SKU reference supports inventory control and ordering within tool management systems, and the robust mechanical design contributes to reduced vibration and improved dimensional control during machining. For procurement or technical integration of Teknik Makina indexable tooling, contact Metav Werkzeuge in Emmerich for precise advice and order handling via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: S196TM Manufacturer: Teknik Makina Product type: Indexable milling cutter for XNEX 0403 inserts Facts Cutting diameter: Ø21 mm Shank diameter: 20 mm Overall length: 150 mm Cutting edges: 3 Torx screw: M2.5x7 Torx key size: T8 Special features Compatible inserts: XNEX 0403 Compatible insert manufacturer: SECO Brand: Teknik Makina SKU: S196TM FAQ Which insert type fits this cutter? The cutter is designed for XNEX 0403 indexable inserts; compatibility with SECO-manufactured XNEX 0403 inserts is specified. What is the shank diameter and how does it affect clamping? The tool features a 20 mm shank, which provides secure clamping in standard holders and contributes to reduced run-out and improved rigidity. How many cutting edges does the tool have and what is the benefit? The cutter has three cutting edges, which promote even chip formation and steady cutting forces, improving surface quality and tool life. What fastening system secures the inserts? Inserts are secured with a Torx M2.5x7 screw; a T8 key is specified for proper tightening and repeatable clamping. Is the overall length suitable for typical operations? With an overall length of 150 mm, the tool offers an adequate reach for many milling tasks while maintaining stiffness for reliable machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
21mm Solid Carbide End Mill For BLMP 0603 Indexable Inserts 3 Flutes, 40mm Cutting Length - Teknik Makina
Combine reliable indexable milling with efficient insert replacement and robust shaft dimensions to maintain steady production. Benefit from the 21 mm cutting diameter, 20 mm shank rigidity and compatibility with BLMP 0603 inserts; order the S480TM directly via Metav Werkzeuge or consult our tooling specialists for fitment advice. S480TM indexable milling cutter for BLMP 0603 inserts — 21 mm diameter, 3 cutting edges (Teknik Makina) The S480TM is a shaft-style milling cutter engineered for use with BLMP 0603 indexable inserts and intended for heavy-duty face and shoulder milling applications where quick insert changes and consistent cutting performance are required. *Compatible with Taegutec BLMP 0603 inserts *21 mm cutting diameter for consistent engagement *20 mm shank diameter for rigid clamping *Torx M3x6.5 screw, T8 key for secure fixing Stable cutting and vibration control for predictable results The indexable cutter body delivers stability through a 20 mm shank and a 21 mm cutting diameter, which together reduce deflection at the toolholder interface and improve repeatability during passes. With 3 cutting edges, the geometry balances chip load and engagement for smooth material removal. The specified 40 mm cutting length and 200 mm overall length are designed to offer a useful reach while keeping overhang manageable, resulting in a more controlled cut and longer reliable tool life per insert change. Quick insert service and secure clamping to minimise downtime Tool changes are straightforward thanks to the standardised fixing system: the head is secured with an M3x6.5 Torx screw and tightened using a T8 key, enabling fast, repeatable replacement of BLMP 0603 inserts. This simple clamping solution reduces setup time and lowers intervention effort on the shop floor. The compatibility with Taegutec insert geometry ensures broad availability of grades and chipbreakers, supporting rapid restoration of cutting performance after each index. Production benefits that add value to everyday machining By combining an indexable cutter body with replaceable inserts, the system reduces per‑edge cost compared with solid cutters while preserving high removal rates. The modular approach supports inventory control and predictable operating costs: keep a small stock of inserts and screws to restore cutting capability quickly. The cutter’s mass of 0.52 kg supports stable rotation at moderate speeds without unnecessary inertia, helping to maintain surface finish and dimensional accuracy in repetitive tasks. Practical fitment and suitable applications The design is intended for standard milling setups where BLMP 0603 inserts are preferred for shoulder and face operations. The S480TM is suitable for shops that require a robust, easy‑to‑service cutter body compatible with widely available inserts from Taegutec. Its measured dimensions and standard fixing mean integration into existing toolholders and workflows is straightforward; the combination of shank rigidity and concise cutting length makes it particularly apt for medium‑depth slotting and peripheral machining where predictable engagement is essential. For tailored advice on integrating the S480TM into production or for information on compatible insert grades and holder selection, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our specialists will advise on tooling and supply. Technical Data SKU: S480TM Manufacturer: Teknik Makina Description: Milling cutter body for BLMP 0603 indexable inserts Secondary description: for BLMP 0603 Indexable Inserts Facts Cutting diameter: 21 mm Number of cutting edges: 3 Shank diameter: 20 mm Cutting length: 40 mm Overall length: 200 mm Weight: 0.52 kg Special features Compatible inserts: BLMP 0603 Compatible insert manufacturer: Taegutec Fixing screw: M3x6.5 Torx Required key: T8 FAQ What insert type does this cutter accept? The cutter is designed for BLMP 0603 indexable inserts, allowing use of standard grades and chipbreakers for various materials. Is the S480TM compatible with Taegutec inserts? Yes, the S480TM is compatible with inserts from Taegutec that conform to the BLMP 0603 format. What are the key dimensions to check for toolholder compatibility? Important dimensions are the 20 mm shank diameter, 21 mm cutting diameter and the 200 mm overall length; verify holder clamping and available overhang before fitting. Which fastening components are required for insert replacement? Insert fixing requires an M3x6.5 Torx screw and a T8 key for secure clamping and repeatable replacement. For what types of milling is this cutter best suited? The cutter body is intended for face and shoulder milling applications where indexable inserts provide a cost‑effective and fast service solution. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
21mm Solid Carbide End Mill For BLMP 0603 Indexable Inserts With Internal Coolant, 200mm Length - Teknik Makina
Take advantage of a compact, insert-based solution that combines internal coolant and proven compatibility with BLMP 0603 indexable inserts to boost cycle reliability and reduce tool-change times. Order through Metav Werkzeuge or request consultancy for setup and integration. Shank milling cutter (for BLMP 0603 indexable inserts) — 21 mm diameter, internal coolant — Teknik Makina A shank milling cutter designed for indexable-insert milling with an integrated coolant channel, providing secure insert fixation and extended tool life in production environments. 21 mm cutting diameter Internal coolant for chip control Compatible with BLMP 0603 (Taegutec) Precision and reliable coolant delivery for steady machining Built around a robust 21 mm cutting diameter and an integrated internal coolant channel, this shank milling cutter delivers stable temperatures at the cutting zone and improved chip evacuation. The combination of coolant-fed geometry and a three-edge configuration ensures consistent cutting conditions and reduces the tendency for built-up edge, which in turn supports predictable cycle times and fewer unscheduled tool changes. The tool is particularly suited to workflows that rely on indexable inserts for rapid recovery and repeatable performance. Rigid design for secure clamping and reach The tool features a 20 mm shank and a 200 mm overall length, with a 40 mm cutting length that balances reach and rigidity. The three cutting edges offer an even load distribution and steady engagement, while the insert is secured with an M3x6.2 screw tightened with a T8 Torx interface. These specifications translate into a tool that is easier to clamp accurately and that maintains concentricity over longer runs, helping to protect workpiece tolerances and reduce rework. Fast insert changes and proven compatibility This cutter is engineered specifically for BLMP 0603 indexable inserts and is compatible with inserts from Taegutec, enabling straightforward integration into existing insert inventories. Use of standardised insert geometry shortens downtime for edge replacement and simplifies stocking. The modular approach promotes operational efficiency in high-mix or high-volume shops where uptime and quick recovery are priorities. Practical procurement and application advice The tool is identified by SKU S480-1TM and is supplied in a configuration that highlights serviceability and routine handling. The modest weight and standard interfaces make the cutter straightforward to include in common toolholders and changeover procedures. For customers seeking a balance of accessibility and precision, the combination of insert compatibility and internal coolant provides a practical route to improved productivity without extensive process requalification. Contact Metav Werkzeuge for tailored technical advice and procurement of the Teknik Makina S480-1TM shank milling cutter, optimised for use with BLMP 0603 inserts and supported from Emmerich by experienced application consultants Technical data SKU: S480-1TM Label: 21mm Schaftfräser BLMP 0603 L200mm mit Innenkühlung ECLASS: 21180806 Manufacturer: Teknik Makina Facts Diameter: 21 mm Shank diameter: 20 mm Overall length: 200 mm Cutting length: 40 mm Cutting edges: 3 Weight: 0.521 kg Special features Internal coolant For BLMP 0603 indexable inserts Compatible with Taegutec inserts Torx screw: M3x6.2 Torx key: T8 FAQ Which inserts fit this milling cutter? The cutter accepts BLMP 0603 indexable inserts; compatibility with Taegutec inserts is specified for straightforward stocking and replacement. Is the cutter supplied with internal coolant? Yes, the design includes an internal coolant channel to support chip evacuation and thermal stability during machining. What are the key dimensions to check for holder compatibility? Refer to the 20 mm shank and 200 mm overall length; the 40 mm cutting length and 21 mm diameter are also relevant for fixture and toolholder selection. How is the insert secured and what tool is required? The insert is fastened with an M3x6.2 screw using a T8 Torx key; these standard interfaces simplify maintenance and fast replacement. What is the product SKU for ordering or stock management? The product is listed as S480-1TM, which identifies the Teknik Makina shank milling cutter configured for BLMP 0603 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
High-performance shank cutters and ball nose cutters for efficient milling
Insert shank cutters and ball nose cutters combine flexibility and productivity for a wide range of milling tasks. The category covers steel-bodied shank cutters fitted with indexable inserts for economical roughing, face milling, cornering and slotting, as well as ball nose cutters for contouring and 3D finishing.
How these tools work and where they belong
Shank cutters with indexable inserts use a carrier body made from hardened steel; the cutting edges are provided by removable inserts rather than a solid tool blank. Where tools do not have internal coolant, process heat and chips are managed via external coolant nozzles or compressed air, which is sufficient for open, surface-level and easily accessible milling on standard materials. Shank cutters with internal coolant feature fine internal channels that deliver coolant or blasting air directly to each cutting edge under pressure. This targeted supply is essential for deep pockets, cavities, full slotting and machining of heat-resistant or difficult-to-machine materials, because it prevents chip re-cutting, protects cutting edges from thermal overload and enables higher feed rates and improved surface quality.
Cut cycle times and reduce tooling costs
- Replaceable indexable inserts reduce consumable costs and shorten tool change time.
- Targeted internal coolant improves chip evacuation and extends insert life.
- Robust steel carrier bodies enable heavy-duty roughing without frequent tool replacement.
- Suitable for roughing, planing, corner milling and slot milling as well as precision 3D profiling with ball nose cutters.
A practical choice for purchasing and stocking tools
Metav brings a pragmatic purchasing advantage: a broad range of milling solutions is available from a single European quality hub. Metav’s focus on democratising precision means workshops benefit from a wide assortment, consistent quality control from Emmerich and steady supply — supported by decades of expertise and over 48,000 satisfied customers. Choose Metav for a centralised sourcing strategy that reduces supplier complexity while keeping access to both insert milling cutters (also referred to as insert milling cutters or indexable end mills) and ball nose cutters (also known as ball nose end mills or radius cutters) straightforward.
Quick summary
Insert shank cutters and ball nose cutters deliver flexible, cost-effective milling: replaceable inserts lower running costs, and internal coolant options enable higher performance and longer tool life where chip control is critical.
FAQ
When should I choose a shank cutter with indexable inserts rather than a solid carbide end mill?
Choose shank cutters with indexable inserts for economical roughing and high-stock-removal tasks where replacing inserts is preferable to replacing an entire tool; they are especially effective for face milling, cornering and slotting operations.
Does internal coolant make a measurable difference for ball nose cutters?
Yes. Internal coolant directed to each cutting edge reduces chip re-cutting and thermal stress, which improves surface finish and increases insert life when machining deep pockets, cavities or heat-resistant materials.
Can shank cutters without internal coolant be used for general workshop milling?
Absolutely. Tools without internal coolant rely on external coolant nozzles or compressed air and are well suited to open, superficial and easily accessible milling on standard materials.
What milling operations are shank cutters for indexable inserts typically used for?
Shank cutters with indexable inserts excel at economical roughing, planfräsen (face milling), corner milling and slot milling; ball nose cutters are the preferred choice for 3D profiling and finishing operations.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com