Efficient shaft cutters and ball nose cutters for versatile milling
Shaft cutters and ball nose cutters serve as robust rotating tools for roughing, face milling, corner milling and slotting, offering economical replacement of indexable inserts rather than whole solid tools. Available in versions with internal coolant to feed lubricant directly to each cutting edge or without internal coolant relying on external nozzles, these cutters ensure effective chip evacuation and thermal control suited to standard materials or deep pocket and cavity work. By preventing chip re-cutting and protecting cutting edges, they deliver higher feed rates, improved surface finish and extended tool life in demanding metalworking applications.
21mm Solid Carbide End Mill for WNMX 0603 Indexable Inserts Internal Coolant, 150mm - Teknik Makina
Take advantage of a compact, indexable solution that combines internal coolant, precision fit for WNMX 0603 inserts and a robust 150 mm overall length to reduce setup time and tool changes. Order directly via Metav Werkzeuge or ask the consultants for application-specific recommendations. Shank milling cutter by Teknik Makina — 21 mm diameter with internal coolant Shank milling cutter for WNMX 0603 indexable inserts, designed for precision milling where coolant-through capability and standard insert compatibility matter Internal coolant for effective cooling Compatible with WNMX 0603 (Korloy) inserts 21 mm cutting diameter, 20 mm shank Robust 150 mm overall length, 2 cutting edges Precision compatibility that shortens setup and stocking This shank milling cutter is engineered for shops standardising on indexable inserts. With support for WNMX 0603 inserts from Korloy, the tool simplifies inventory and reduces the number of different cutters required across similar operations. Standardising on a common insert format means fewer changeovers and predictable regrinds, which translates into lower effective tooling costs and smoother production planning. The internal coolant channel further contributes to consistent cutting conditions by directing coolant to the cutting zone. Performance gains through cooling and controlled chip flow Built for steady material removal, the cutter’s 21 mm cutting diameter and 2 cutting edges are matched to a 20 mm shank to deliver concentricity and rigidity in the holder. The internal coolant capability improves heat management at the insert edge, supporting longer insert life and reduced risk of built-up edge under intermittent machining. For operations prioritising throughput and surface quality, these attributes lead to measurable efficiency improvements per component produced. Practical specifications that aid maintenance and assembly Maintenance and insert changes are straightforward: the indexable inserts are secured with an M2.5x6.5 screw that is tightened using a T8 Torx key, ensuring reliable clamping and repeatable positioning. The tool’s 150 mm overall length provides reach without excessive overhang, while the modest mass (0.379 kg) helps maintain spindle balance. Supplied as SKU S904-1TM, the cutter supports quick replacement of inserts and predictable toolholding, which keeps machine downtime to a minimum and production schedules on track. Discuss Teknik Makina tooling with Metav Werkzeuge to align this internal-coolant shank milling cutter to the workshop’s insert strategy and ensure rapid supply from our Emmerich hub Technical data Article number: S904-1TM Label: 21mm Schaftfräser WNMX 0603 L150mm mit Innenkühlung Manufacturer: Teknik Makina Dimensions & core data Cutting diameter: 21 mm Shank diameter: 20 mm Overall length: 150 mm Cutting length: 40 mm Number of cutting edges: 2 Weight: 0.379 kg Torx key required: T8 Torx screw: M2.5x6.5 Materials & features Internal coolant: yes Compatible inserts: WNMX 0603 (Korloy) eClass: 21180806 Category path: Zerspanen › Schaftfräser Product type: Shank milling cutter FAQ Which inserts fit this cutter? The cutter accepts WNMX 0603 indexable inserts, compatible with inserts from Korloy, enabling straightforward procurement and interchangeability. Is the tool coolant-through capable? Yes, the shank milling cutter features internal coolant, allowing directed coolant flow to the cutting edge for improved thermal control. What are the key dimensions to check for holder compatibility? Check the 21 mm cutting diameter and the 20 mm shank diameter against the toolholder; the overall length is 150 mm (SKU S904-1TM). Which fastening parts are used for the inserts? Inserts are secured with an M2.5x6.5 screw and require a T8 Torx key for tightening and removal. How many cutting edges does the tool have and what is the impact? The tool has 2 cutting edges, offering a balance between material removal rate and finish; fewer edges can simplify chip evacuation while maintaining rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
21mm Solid End Mill For 3PKT 1004 Indexable Inserts, 30mm Cutting Length, 200mm Overall Length - Teknik Makina
Robust clamp reliability and precise shank dimensions provide consistent cutting performance; compatibility with Taegutec 3PKT 1004 inserts reduces inventory complexity and speeds changeovers. Order the S485TM shank cutter directly via Metav Werkzeuge or request advice from our consultants. S485TM shank cutter – indexable insert cutter for Taegutec 3PKT 1004, Ø21 mm S485TM is a solid shank cutter designed to accept 3PKT 1004 indexable inserts for demanding milling tasks in industrial and workshop environments. Compatible with Taegutec 3PKT 1004 inserts 21 mm cutter diameter, 20 mm shank Torx clamp M2.5x7 with T15 key Stable machining with a rigid shank for repeatable results The body is configured for indexable inserts, mounted on a rigid 20 mm shank to reduce deflection under load. With a nominal Ø21 mm cutter diameter and a 30 mm cutting length, the tool provides a stable cutting engagement that is beneficial for process consistency and extended cutter life. The result is improved part accuracy and less scrap, as tool behaviour is predictable and easily integrated into existing machining cycles. Fast insert changes and secure clamping to minimise downtime Insert retention is executed via a Torx clamp (M2.5x7) that is tightened with a T15 key, enabling quick and secure indexable insert replacement. Compatibility with Taegutec 3PKT 1004 inserts simplifies procurement and reduces set-up time on the shop floor. The clamping concept is designed so that insert exchanges are straightforward and repeatable, helping to keep machine downtime to an absolute minimum. Robust construction tailored to demanding milling operations The cutter has an overall length of 200 mm and a measured weight of 1.259 kg, reflecting a substantial build that supports dynamic stability when cutting. With two cutting edges the design balances cutting forces to reduce vibration and promote even wear across inserts. The combination of a substantial shank, dependable clamp geometry and standardised insert compatibility makes this tool well suited to workshop and production environments where reliability and easy servicing are priorities. The S485TM body is delivered ready for immediate integration into compatible tool holders. For reliable supply and technical guidance, contact Metav Werkzeuge in Emmerich — order the Teknik Cutting Tools S485TM shank cutter via Metav Werkzeuge and get assistance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: S485TM Manufacturer: Teknik Makina Article: shank cutter for 3PKT 1004 indexable inserts Dimensions / measurable data Cutter diameter: 21 mm Shank diameter: 20 mm Cutting length: 30 mm Overall length: 200 mm Number of cutting edges: 2 Weight: 1.259 kg Features / compatibility Compatible with Taegutec 3PKT 1004 inserts Clamp screw: M2.5x7 (Torx) Torque key: T15 Indexable insert system FAQ Which inserts fit this cutter? The cutter is compatible with Taegutec 3PKT 1004 indexable inserts and is configured to accept that insert shape and size. What shank size is required for the tool holder? A 20 mm shank diameter is specified; the S485TM requires a tool holder or collet that accepts a 20 mm shank. How are the inserts secured? Inserts are clamped using a Torx screw M2.5x7, tightened with a T15 key for secure retention and quick replacement. For which machining tasks is this cutter intended? The tool is designed for demanding milling operations where a rigid shank and standardised indexable inserts provide process stability and reliable tool life. What are the key dimensions to check before ordering? Key dimensions: cutter Ø 21 mm, shank Ø 20 mm, cutting length 30 mm, overall length 200 mm, weight 1.259 kg. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
21mm Square Shank Cutter For WNMX 0603 Indexable Inserts, 2 Cuts 150mm Length - Teknik Makina
Reliable milling performance is achieved through the combination of a 21 mm diameter body and a shaft diameter of 20 mm, delivering stable clamping and consistent material removal; compatibility with WNMX 0603 indexable inserts ensures flexible tooling choices. Order the shank milling cutter directly via Metav Werkzeuge or consult our specialists for application-specific advice. Teknik Makina Shank Milling Cutter S904TM – 21 mm diameter, for WNMX 0603 indexable inserts The Teknik Makina Shank Milling Cutter S904TM is a precision insert-mounted milling tool designed for robust material removal using WNMX 0603 indexable inserts, ideal for general machining and production setups. Compatible with WNMX 0603 indexable inserts Shaft Ø20 mm for robust clamping Cutting length 40 mm for deep cuts Two cutting edges with 90° cutting angle Stable clamping for consistent machining results A solid shaft diameter of 20 mm paired with a 21 mm diameter body reduces vibration and improves runout stability, which directly benefits surface finish and tool life. The tool’s two cutting edges are arranged for efficient chip removal and balanced cutting forces; this means fewer tool changes and more predictable cycle times in series production. For operations using indexable tooling, the arrangement translates into repeatable cuts and easier process parameter tuning, because insert geometry does much of the cutting work while the shank ensures positional stability. Fast insert changes and low downtime Designed for rapid serviceability, the cutter secures inserts with a Torx screw M2.5x5.5 driven by a T8 key, allowing quick replacement without specialised fixtures. The tool accepts WNMX 0603 inserts (Korloy-compatible), which are widely available and simplify inventory management. A cutting length of 40 mm and a 90° cutting angle enable reliable shoulder milling and face operations; the modular insert system reduces regrinding and dressing needs, improving overall workshop throughput and lowering lifecycle costs compared with solid-carbide equivalents. Built for everyday workshop reliability With an overall length of 150 mm and a weight of 0.379 kg, the cutter is balanced for both CNC and manual milling applications where rigidity and accessibility are important. The insert-based concept delivers versatility: different grades and coatings of WNMX 0603 inserts can be selected to match workpiece materials and surface finish requirements. This makes the tool a pragmatic choice for job shops and production lines seeking a combination of flexibility, predictable maintenance intervals and straightforward spare-part handling. For tailored advice on integrating the Teknik Makina shank milling cutter into production, contact Metav Werkzeuge for delivery and technical consultation: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S904TM Manufacturer: Teknik Makina Data Diameter: 21 mm Shaft diameter: 20 mm Cutting length: 40 mm Overall length: 150 mm Number of cutting edges: 2 Weight: 0.379 kg Cutting angle: 90° Special features Compatible inserts: WNMX 0603 (Korloy compatible) Torx screw: M2.5x5.5 Torx key: T8 FAQ Which inserts fit this cutter? The cutter accepts WNMX 0603 indexable inserts; Korloy-compatible grades are commonly used for the S904TM to match specific material and finish requirements. How are the inserts secured? Inserts are tightened with a Torx screw M2.5x5.5 using a T8 key, enabling quick and secure clamping for routine insert changes. Is the cutter suitable for CNC machining? Yes, the tool’s 20 mm shaft diameter and balanced 150 mm overall length make it suitable for CNC milling as well as rigid manual setups where stable clamping is required. What cutting operations is this tool best for? With a 40 mm cutting length and a 90° cutting angle, the tool is well suited to shoulder milling, face milling and general-purpose material removal where insert tooling is preferred. How many cutting edges does it have and what is the benefit? The tool features two cutting edges, providing balanced cutting forces and good chip evacuation, which contributes to stable machining and predictable tool life. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22mm Cutter For APKT 1003 Indexable Inserts With Internal Coolant, 120mm Overall Length - Teknik Makina
Benefit from 22 mm cutter diameter and internal coolant for improved chip control and longer insert life; combine cost-effective indexable tooling with straightforward integration. Order directly via Metav Werkzeuge or consult our specialists for application advice. Shank cutter S168-1TM for APKT 1003 indexable inserts — 22 mm, internal coolant (Teknik Makina) Shank cutter S168-1TM is a compact indexable milling body designed for reliable machining with APKT 1003 inserts, offering efficient chip evacuation and straightforward mounting for production and repair workshops. 22 mm cutter diameter for compact machining Internal coolant for improved chip evacuation Compatible with APKT 1003 indexable inserts 20 mm shank for standard holder interfaces Optimised machining performance for reliable cycle times The 22 mm tool body combines a compact profile with three cutting edges, enabling steady material removal while keeping runout and vibration low. Fitted with APKT 1003 indexable inserts, the design reduces per-part tooling cost because only the inserts are replaced when worn. The integrated internal coolant directs cutting fluid to the insert seat, improving cooling and chip clearance; this helps maintain consistent cutting forces and supports predictable cycle times in batch or jobbing environments. Seamless integration with common toolholders and insert systems With a 20 mm shank and an overall length of 120 mm, the cutter aligns with standard holder interfaces and provides a 40 mm cutting length for accessible engagement depths. The clamping system uses a Torx screw (M2.5x5.5) tightened with a T8 key for repeatable, secure insert seating. Compatibility with Korloy APKT 1003 inserts ensures easy sourcing of cutting tips and interchangeability across existing indexable milling setups. Reduced downtime through simple maintenance and sturdy construction The tool body’s compact mass (approx. 0.291 kg) and internal coolant capability support thermal stability and efficient chip evacuation during prolonged operations. Fewer complete-tool changes are needed because insert replacement is fast and requires only basic tools. This contributes to cleaner changeovers at the machine and a lower total cost of ownership for shops that rely on indexable tooling for mixed batch sizes. Discuss specific machining parameters and delivery options with Metav Werkzeuge to ensure the S168-1TM cutter meets the application requirements; contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and rapid dispatch from Emmerich Technical data Article number: S168-1TM Manufacturer: Teknik Makina Product type: Shank cutter Label: 22mm Schaftfräser APKT 1003 L120mm mit Innenkühlung Compatible inserts: APKT 1003 Compatible insert manufacturer: Korloy Internal coolant: yes Core technical dimensions Cutter diameter: 22 mm Overall length: 120 mm Shank diameter: 20 mm Cutting length (shank): 40 mm Number of cutting edges: 3 Weight: 0.291 kg Torx key size: T8 Torx screw: M2.5x5.5 Materials & features Indexable insert system (APKT 1003) Internal coolant channel Standardised 20 mm shank for common holders Torx clamping system for secure insert fixation FAQ Which inserts fit this cutter? The cutter accepts APKT 1003 indexable inserts; Korloy-manufactured APKT 1003 inserts are explicitly compatible with the S168-1TM tool body. Does the tool provide coolant through the body? Yes, the S168-1TM features internal coolant to support chip evacuation and cooling at the insert tip. What shank size and overall length does the cutter have? The tool has a 20 mm shank and an overall length of 120 mm, with a 40 mm cutting length. Which fastening hardware is required for insert clamping? Insert clamping uses a Torx screw M2.5x5.5, tightened with a T8 Torx key for consistent and secure seating. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
22mm Cutter Head For LNMX 1006 Indexable Inserts 2 Flutes, 100mm Overall Length, M3x7 Screw - Teknik Makina
Benefit from high rigidity and fast indexable-insert changes thanks to the 20 mm shank and compatibility with LNMX 1006 inserts; the 22 mm cutting diameter together with two cutting edges and a 90° cutting angle delivers stable, repeatable machining. Order the tool directly via Metav Werkzeuge or contact our consultants for application-specific advice. Teknik Makina — Shank milling cutter for LNMX indexable inserts, 22 mm diameter The Shank milling cutter for LNMX indexable inserts is a compact, insert-based milling solution for general finishing and light-roughing tasks in production environments. 22 mm cutting diameter 20 mm shank diameter Two cutting edges, 90° cutting angle For LNMX 1006 indexable inserts Achieve consistent cycle times with insert-based milling This insert-holder cutter is engineered to deliver predictable results in repetitive machining tasks. The combination of a 22 mm cutting diameter and a 90° cutting angle produces a controlled cutting force vector, which reduces vibration and improves surface finish compared with less rigid geometries. Using LNMX 1006 indexable inserts means that tool life management becomes a matter of replacing small, economical inserts rather than the whole cutter, lowering per-part costs and simplifying inventory. The tool’s balanced geometry and two cutting edges help maintain productivity during short runs and frequent changeovers, making it suitable for workshops and small-series production where setup time influences overall throughput. Fast insert replacement and secure clamping to reduce downtime Designed for quick maintenance, the cutter uses a Torx M3x7 fastening screw tightened with a T8 key for secure clamp performance. The straightforward clamping concept shortens tool-change intervals and minimises potential alignment errors during reassembly. The 20 mm shank contributes to stable toolholding in standard holders, enhancing concentricity and repeatability across shifts. Compatibility with established insert makers such as Korloy widens procurement options and allows standardised stock across multiple machines. At a weight of 0.263 kg, the tool is easy to handle during changeovers while retaining sufficient mass to dampen chatter on compatible spindles. Sourcing confidence and workshop support for dependable results Built by Teknik Makina and listed as LN097TM, this shank-mounted cutter provides a practical balance of performance and workshop convenience. Sourcing through Metav Werkzeuge brings additional benefits: a transparent supply chain from Emmerich, access to thousands of related tooling items, and expert advice for matching insert grades and coatings to the intended material. For operations seeking to reduce supplier complexity while keeping high precision, the combination of a standardised insert system and a robust shank interface supports predictable process performance and lower total cost of ownership. The tool’s straightforward specification encourages consistent setup practices across operators, contributing to quality assurance and repeatable parts. For procurement or technical specification support regarding the Teknik Makina shank milling cutter (LN097TM), contact Metav Werkzeuge for tailored supply options and compatibility guidance Technical data SKU: LN097TM Manufacturer: Teknik Makina Article name: Shank milling cutter for LNMX indexable inserts Eclass: 21180806 ETIM: EC011860 Core specifications Cutting diameter: 22 mm Shank diameter: 20 mm Number of cutting edges: 2 Overall length: 100 mm Weight: 0.263 kg Cutting angle: 90° Features and compatibility Compatible inserts: LNMX 1006 Compatible insert manufacturer: Korloy Fastening screw: Torx M3x7 Torx key size: T8 Files: migration IDs available FAQ Which inserts fit this cutter? The cutter accepts LNMX 1006 indexable inserts; insert compatibility includes standard LNMX geometries from suppliers such as Korloy and other manufacturers listed in the tool specifications. What key and screw are required for insert changes? Insert retention uses a Torx M3x7 screw; a T8 Torx key is needed for secure tightening and rapid replacement. Is the shank suitable for collet holders or hydraulic chucks? The 20 mm shank is appropriate for standard 20 mm holders and chucks; selection of the correct clamping system is important to achieve optimum concentricity and damping. Can this cutter be used for roughing operations? The tool is optimised for light roughing and finishing where indexable inserts like LNMX 1006 provide flexibility; heavy roughing may require a different geometry or larger-diameter cutter. What is the article number for ordering? The article is listed as LN097TM and supplied by Teknik Makina through Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
22mm End Mill for APKT 1003 Indexable Inserts With Internal Coolant, 100mm Overall Length - Teknik Makina
Take advantage of a compact cutter body that combines internal coolant and a 22 mm diameter for improved chip control and stable machining. The combination of a 20 mm shank, 30 mm cutting length and three cutting edges ensures balanced material removal and reliable tool life — order or request guidance from Metav Werkzeuge for application advice. 22 mm milling cutter S146-1TM — cutter body for APKT 1003 indexable inserts, internal coolant (Teknik Makina) 22 mm milling cutter S146-1TM designed as a robust cutter body for APKT 1003 indexable inserts, equipped with internal coolant to support efficient chip evacuation and consistent surface results in serial and job-shop milling Internal coolant for improved chip control 22 mm diameter for compact machining Compatible with APKT 1003 Korloy inserts 3 cutting edges for balanced removal Higher material removal rates with consistent stability The cutter body is engineered to deliver stable cutting performance through its three-flute geometry and stout 20 mm shank, which reduces vibration and improves run-out behaviour. The combination of a 22 mm body diameter and 30 mm cutting length enables secure engagement in shoulder and light face milling operations. For production environments where cycle time and repeatability matter, the internal coolant feed is routed to the cutting zone to assist chip evacuation and reduce heat at the cutting edge, which supports longer insert life and fewer process interruptions. Compatibility and secure clamping for reduced setup times The tool is supplied for use with APKT 1003 indexable inserts and is matched to industry-standard clamping hardware, including the specified Torx T8 key and M2.5x5.5 Torx screw. This configuration ensures fast insert changes and repeatable seat seating, so the cutting edge is positioned reliably after each index. Using standardised inserts from Korloy simplifies inventory and enables straightforward selection of grades for steel, aluminium or mixed materials where indexable insert strategies are preferred. Practical serviceability and workshop integration The design of the S146-1TM milling cutter supports efficient maintenance and replacement routines: the accessible Torx drive facilitates quick insert fastening, while the internal coolant connection is compatible with typical machine coolant supplies. The tool’s modest mass and compact overall dimensions (100 mm total length) make it suitable for both mobile setups and fixed-production fixtures. Technicians will appreciate that common workshop tools suffice for routine interventions, reducing downtime and keeping throughput steady. Contact Metav Werkzeuge for tailored application advice and secure supply of the Teknik Makina S146-1TM milling cutter with internal coolant and APKT 1003 compatibility Technical Data Article number: S146-1TM Label: 22mm Schaftfräser APKT 1003 L100mm mit Innenkühlung Manufacturer: Teknik Makina Product type: Milling cutter Facts Diameter: 22 mm Total length: 100 mm Shank diameter: 20 mm Cutting length: 30 mm Number of cutting edges: 3 Weight: 0.243 kg Special features Internal coolant Compatible with APKT 1003 inserts (Korloy) Torx key: T8 Torx screw: M2.5x5.5 Designed for indexable insert clamping FAQ Which indexable inserts fit this cutter body? The cutter body accepts APKT 1003 indexable inserts; the S146-1TM is supplied to work with Korloy-manufactured inserts for standardised seating and repeatable geometry. Is the coolant supplied through the tool body? Yes, the S146-1TM features internal coolant directed to the insert area to assist chip evacuation and temperature control during milling. What clamping hardware is required for insert changes? Insert fastening uses an M2.5x5.5 Torx screw driven by a T8 key, allowing quick and secure insert replacement on the S146-1TM cutter body. Does the tool require a special holder or is the shank standard? The tool has a 20 mm shank suitable for standard collet or holder systems that accept a 20 mm diameter shank, enabling easy integration into existing tool setups. For which machining tasks is this cutter particularly suitable? With a 22 mm diameter, 30 mm cutting length and three cutting edges, the S146-1TM is well suited to medium-duty slotting, shoulder milling and light face milling where indexable insert economics are desired. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
22mm End Mill for APKT 1003 Indexable Inserts With Internal Cooling, 150mm L - Teknik Makina
Take advantage of the combination of precision, internal coolant and broad insert compatibility for reliable, high-throughput milling. Order the cutter body directly via Metav Werkzeuge or ask the consultants for machining recommendations. Shank cutter — indexable end mill body with internal coolant, 22 mm diameter (Teknik Makina) A shank cutter designed as an indexable end mill body for APKT 1003 indexable inserts, suitable for machining operations where stiffness and coolant delivery to the cutting zone are essential. 22 mm cutter diameter Internal coolant supply Compatible with APKT 1003 inserts (Korloy) 20 mm shank, 60 mm cutting length Stable cutting performance for consistent surface quality The tool body delivers rigidity through its 22 mm diameter and 20 mm shank, reducing chatter and improving surface finish on a variety of workpieces. With three cutting edges, the design balances material removal rate and stability: a modest number of edges lowers cutting forces per tooth while maintaining a steady metal removal rate. For shops migrating from solid end mills to indexable systems, the holder body provides a predictable cutting behaviour and allows the use of standard APKT 1003 inserts for cost-efficient edge replacement. Coolant-through design reduces heat and improves tool life A controlled internal coolant channel feeds coolant directly to the insert seat, enhancing chip evacuation and reducing thermal load at the cutting edge. The direct coolant supply supports higher cutting parameters without compromising tool life, particularly in interrupted cuts or deeper pocketing. Maintenance is straightforward: insert clamping uses a Torx T8 driver and M2.5x5.5 screw, enabling quick index changes and minimal downtime during shift changes. Versatile compatibility and simple integration into production Compatibility with Korloy-manufactured APKT 1003 inserts makes the holder an economical choice for workshops standardising on carbide grades and geometries. The cutter’s total length of 150 mm and 60 mm effective cutting length fit common tool setups, and the modest weight of 0.36 kg keeps balance considerations simple for spindle-speed adjustments. Using an indexable holder reduces inventory of full-profile cutters while retaining flexibility for finishing or roughing by selecting suitable inserts. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Makina indexable end mill body with internal coolant into existing processes, and request verification for specific machine-spindle and workpiece combinations Technical data SKU: S178-1TM Manufacturer: Teknik Cutting Tools Label: 22mm Shank cutter APKT 1003 L150mm with internal coolant Facts Cutter diameter: 22 mm Total length: 150 mm Shank diameter: 20 mm Cutting length: 60 mm Number of cutting edges: 3 Weight: 0.36 kg Special features Internal coolant Compatible with APKT 1003 indexable inserts Suitable insert manufacturer: Korloy Torx key: T8 Torx screw: M2.5x5.5 FAQ How does internal coolant improve milling with this holder? Internal coolant supplies cutting fluid directly to the insert seat, improving chip evacuation and cooling the cutting edge, which can increase achievable cutting speeds and extend tool life for the Teknik Makina indexable end mill body. Which inserts fit this cutter body? This holder is designed for APKT 1003 indexable inserts and is compatible with inserts produced by Korloy, allowing straightforward procurement and interchangeability. Can the holder be used for finishing operations? Yes. With the correct choice of insert geometry and grade, the holder supports finishing passes thanks to its rigidity and coolant-assisted heat control. What tool is needed to change inserts? Insert clamping uses a Torx T8 driver and an M2.5x5.5 screw for secure fixation and rapid index changes. Is the shank size suitable for standard toolholders? The 20 mm shank matches common toolholders and collets designed for that nominal shank diameter; compatibility should be confirmed against the specific clamping system. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
22mm End Mill for APXT 1003 Indexable Inserts 3 Flutes 90° Cutting Angle 40mm Cutting Length - Teknik Makina
Take advantage of the rigid 20 mm shank, a 22 mm cutting diameter and compatibility with APXT 1003 indexable inserts for reliable, high‑repeatability milling — order directly via Metav Werkzeuge or consult our technical advisers for application support. Shank Milling Cutter S168TM — 22 mm diameter, 3‑edge, for APXT 1003 indexable inserts (Teknik Makina) The Shank Milling Cutter S168TM is an insert milling cutter designed for industrial milling tasks, offering rigid toolholding and economical indexable insert use in production and jobbing shops 22 mm cutting diameter Three cutting edges for stable cuts 20 mm shank for rigid toolholding Compatible with APXT 1003 inserts High stability for tight tolerances and long tool life The combination of a 20 mm shank and three‑flute geometry gives notably improved stiffness compared with smaller shank tools. This design reduces tool deflection under load, which results in consistent part accuracy and extended insert life. In practice, the stiffer mounting allows machining at higher feed rates with fewer passes, so cycle times are reduced while surface quality remains stable. The specification is especially suitable for milling operations where repeatability and dimensional control are essential. Fast insert changes and secure clamping for uptime Clamping is performed using a Torx M2.5 x 5.5 screw tightened with a T8 key, providing positive and repeatable insert retention. Compatibility with APXT 1003 indexable inserts — including those from Korloy — means replacements are inexpensive and quick to fit, reducing downtime. The indexable system separates cutting edge wear from the tool body, lowering long‑term tooling costs and simplifying inventory: a small set of inserts maintains multiple cutters across the shop floor. Geometry optimised for mixed finishing and light roughing A 90° cutting angle and three cutting edges deliver a balance between material removal rate and surface finish. With a cutting length of 40 mm and overall length of 120 mm, the cutter is engineered for accessible reach without compromising rigidity. The flute arrangement moderates chip formation, improving evacuation and lowering the risk of re-cutting swarf. For users seeking a predictable finish and repeatable cycle times, this geometry supports efficient throughput on a wide range of operations. Practical workshop benefits and application scope Beyond geometry, the tool’s modest weight (0.29 kg) and standard interfacing make it straightforward to fit into existing tool holders and machining setups. The cutter is aimed at production and maintenance engineers looking for a cost‑effective indexable solution that integrates with standard insert systems. Where flexibility is required — quick edge changes, repeatable clamping and consistent runout control — this tool provides a straightforward upgrade to productivity without complex retooling. For robust indexable milling with APXT 1003 inserts, contact Metav Werkzeuge for procurement and tailored technical advice: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data SKU: S168TM Manufacturer: Teknik Makina Product: Shank milling cutter for APXT 1003 indexable inserts Compatible inserts: APXT 1003 (Korloy) Torx screw: M2.5 x 5.5 Torx key: T8 Core specifications Diameter: 22 mm Shank diameter: 20 mm Cutting length: 40 mm Number of cutting edges: 3 Overall length: 120 mm Cutting angle: 90° Weight: 0.29 kg Features & compatibility Compatible with Korloy inserts For APXT 1003 indexable inserts Three‑flute geometry for stable cutting Torx clamping screw for secure insert fixation FAQ Which inserts fit this milling cutter? The cutter accepts APXT 1003 indexable inserts; compatibility with Korloy inserts is specified for the milling cutter S168TM from Teknik Makina. What shank and holder dimensions are required? The tool features a 20 mm shank diameter; a matching rigid toolholder with 20 mm bore is recommended for optimal performance. How many cutting edges does the tool have and what is the benefit? The tool has three cutting edges, which provide a compromise between smooth chip load distribution and sufficient material removal rate for stable cutting. What torque key is needed for insert clamping? Insert clamping uses a Torx screw M2.5 x 5.5, tightened with a T8 key for secure and repeatable fixation. For which operations is this cutter best suited? With a 22 mm diameter and 40 mm cutting length, the cutter is aimed at mixed finishing and light roughing where rigidity and quick insert changes are priorities. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
22mm Shank Cutter for TPKN 1103-2204 Indexable Inserts 2 Flutes 120mm Overall Length, M6x14 Torx - Teknik Makina
Combine solid shank stability with reliable indexable‑insert compatibility — the result is consistent finishing and fast insert changes; order the tool directly via Metav Werkzeuge or contact the consultants for application support. Teknik Makina S116TM Shaft milling cutter — 22 mm diameter, indexable inserts compatible The Shaft milling cutter S116TM is a shank-mounted milling solution for precision face and slot operations using TPKN 1103–2204 indexable inserts on CNC and manual machines. Compatible with TPKN 1103–2204 inserts 22 mm cutting diameter 20 mm shank for stable clamping Two cutting edges for smooth finishing Reliable compatibility for indexable-insert machining The design centres on proven insert compatibility with TPKN 1103 and TPKN 2204 grades, enabling toolshops to use a widely available insert family for a variety of finishing tasks. Using indexable inserts means that only the small cutting tip is renewed when worn, which reduces downtime and keeps inventory simple. The 22 mm cutting diameter and the two‑edge configuration provide a balance between material removal and surface quality, while the fixed insert pocket and clamping arrangement ensure repeatable positioning for every index. Stability and predictable performance in daily use A 20 mm shank and an overall length of 120 mm deliver rigid support in standard toolholders, lowering vibration and improving surface finish compared with slender alternatives. The cutter’s 45 mm cutting length offers sufficient engagement for shallow face milling or light slotting, and the modest mass (approx. 0.301 kg) assists in spindle balance and acceleration. Insert clamping is achieved with an M6x14 Torx screw secured with the supplied 3 Allen key, giving a straightforward and reproducible assembly that supports consistent cycle times on production batches. Quick setup and maintenance for workshop efficiency The indexable system simplifies changeovers: worn inserts are removed and indexed or replaced without removing the holder from the spindle in many setups, reducing machine downtime. The robust clamping screw and accessible pocket geometry make insert changes efficient and safe, which is particularly valuable in small to medium production runs where uptime is a priority. Clear labelling of the tool and standard dimensions assist in inventory management and make the shaft cutter easy to integrate into established tooling sets. Practical applications and operational benefits This shank cutter is suited to finishing passes, face milling and light slotting where repeatable geometry and surface quality matter. Compatibility with the TPKN insert family permits selection of grades and geometries optimised for the workpiece material and machining strategy; toolroom staff can therefore adapt cutting edge grade without changing the holder. The combination of stable clamping, a standardised 22 mm diameter and simple insert access supports reliable results across batch production and bespoke machining tasks. For supply, compatibility checks or to discuss tooling strategies for Teknik Makina cutting solutions contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — the team will advise on the S116TM and suitable insert grades. Technical data Article number: S116TM Manufacturer: Teknik Makina Designation: Shaft milling cutter for TPKN 1103-2204 indexable inserts eClass: 21180806 ETIM: EC011860 Dimensions & weights Cutting diameter: 22 mm Shank diameter: 20 mm Cutting length: 45 mm Overall length: 120 mm Number of cutting edges: 2 Weight: 0.301 kg Features & compatibility Compatible inserts: TPKN 1103 / 2204 Torx screw: M6x14 Torx key: 3 Allen SKU: S116TM Files available: 2 attachments FAQ Which insert types fit this cutter? The cutter accepts TPKN 1103 and TPKN 2204 indexable inserts; insert grade selection determines material suitability and cutting strategy. What are the key dimensions to check for toolholding? Check the 20 mm shank and 120 mm overall length to ensure compatibility with the selected chuck or holder and sufficient projection for the intended cut. How many cutting edges does the tool have? This shaft milling cutter is supplied with two cutting edges, providing a compromise between surface finish and material removal rate. How is the insert fixed in place? Insert retention is via an M6x14 Torx screw, tightened with the supplied 3 Allen key for reproducible clamping. What applications suit this shank milling cutter? Typical uses are finishing passes, face milling and light slotting where indexable inserts and quick tip changes are valued. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
22mm Shank Milling Cutter for APXT 1003 Indexable Inserts 3-Flute, 90° Cutting Angle, 30mm Cutting Length - Teknik Makina
The combination of reliable compatibility with APXT 1003 indexable inserts and a rigid Ø22 mm cutting diameter ensures efficient, reproducible milling results; the compact 100 mm overall length and secure Torx fixing make the tool well suited for standard CNC operations. Order via Metav Werkzeuge for assured supply or consult the technical team for application advice. Shank Cutter S146TM — for APXT 1003 Indexable Inserts, Ø22 mm, 3 Cutting Edges (Teknik Makina) A Shank Cutter S146TM engineered for milling with APXT 1003 indexable inserts, combining a 22 mm cutting diameter and a 90° cutting angle for consistent face and slot milling. Compatible with APXT 1003 indexable inserts Ø22 mm cutting diameter 3 cutting edges for stable machining M2.5x5.5 Torx screw and T8 key High-performance machining through proven insert compatibility The S146TM is designed around the APXT 1003 insert system, offering the economic advantage of replaceable cutting edges and predictable performance. By accepting Korloy inserts, the tool allows rapid return to cutting after an insert change, reducing machine downtime. The arrangement of 3 cutting edges distributes cutting forces evenly, which helps to maintain a smooth chip flow and steady spindle load. For production environments prioritising throughput, this configuration supports repeatable results and lowers per-part tooling costs. Rigidity and set-up precision for stable results A 20 mm shank provides the necessary stiffness for many CNC milling setups, while the 30 mm cutting length balances reach with rigidity. The precise shank diameter and overall 100 mm length contribute to predictable deflection characteristics during cutting, improving dimensional stability. The cutter is fastened using an M2.5x5.5 Torx screw (T8), enabling secure clamping of the insert and simple servicing with commonly available torque tools. These features translate into fewer interruptions for rework and a shorter machine setup time. Practical advantages in workshop workflows Selecting a shank cutter that matches a widely used insert type helps streamline inventory; stocking the S146TM means fewer complete cutters are required when inserts are renewed. The Ø22 mm cutting diameter is suited to a range of face and light slotting operations where APXT 1003 inserts are specified. The tool’s modest weight (0.243 kg) and standard fixing method make handling and replacement straightforward on machine trolleys and in production cells, promoting a cleaner changeover process and safer tool handling routines. Maintenance and serviceability that keep production moving Service tasks are reduced to a quick insert replacement and a single Torx screw operation, with the T8 key commonly available across maintenance toolsets. The straightforward construction simplifies inspection and reduces the time needed for tool checks between shifts. Keeping a small stock of APXT 1003 inserts and M2.5x5.5 screws ensures minimal downtime; the modular nature of indexable systems helps to preserve cutter bodies while delivering consistent cutting performance over many insert cycles. For reliable supply and practical advice on using the Teknik Cutting Tools S146TM shank cutter, contact Metav Werkzeuge GmbH in Emmerich by e‑mail at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 for tailored recommendations and fast delivery. Technical Data Article number: S146TM Manufacturer: Teknik Makina Product: Shank cutter for APXT 1003 indexable inserts SKU: S146TM Facts Cutting diameter: 22 mm Shank diameter: 20 mm Cutting length: 30 mm Overall length: 100 mm Number of cutting edges: 3 Cutting angle: 90° Weight: 0.243 kg Torx screw: M2.5x5.5 Torx key size: T8 Special features Compatible with APXT 1003 indexable inserts Suitable for Korloy insert variants Secure Torx fixing for quick insert changes Compact shank design for standard CNC toolholders FAQ Which inserts are compatible with this cutter? The S146TM is designed for APXT 1003 indexable inserts and is compatible with Korloy-manufactured inserts in that size and seat form. What are the key dimensions to check when mounting the shank cutter? Check the 20 mm shank diameter, the Ø22 mm cutting diameter, and the overall 100 mm length to ensure correct clamping and adequate clearance in the machine setup. How is the insert secured in the S146TM? The insert is fastened with an M2.5x5.5 Torx screw, tightened using a T8 key for consistent clamping force and easy replacement. Is the S146TM suitable for heavy roughing operations? The S146TM is optimised for stable, repeatable milling with APXT 1003 inserts; for heavy roughing, consider cutter and insert combinations specified for higher cutting forces and larger insert geometries. Can the cutter body be reused after multiple insert changes? Yes. The indexable system of the S146TM is intended to allow repeated insert replacement while retaining the cutter body, offering cost efficiency across multiple insert cycles. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22mm Solid End Mill for APXT 1003 Indexable Inserts 3 Flutes, 70mm Cutting Length, 90° Cutting Angle - Teknik Makina
Take advantage of the combination of reliable indexable‑insert compatibility, robust shank dimensions and a long cutting length for steady production cycles; order directly via Metav Werkzeuge or consult our specialists for tailored advice. Shank Milling Cutter S187TM — for APXT 1003 indexable inserts, Ø22 mm, 3 cutting edges (Teknik Makina) A Shank Milling Cutter S187TM engineered for efficient face and shoulder milling with APXT 1003 indexable inserts, suitable for medium‑duty production environments 22 mm cutting diameter Shank diameter 20 mm 3 cutting edges 70 mm cutting length Compatible with Korloy inserts Consistent material removal for repeatable runs The tool is designed to deliver steady metal removal thanks to a 90° cutting geometry and three precisely spaced cutting edges. With a Ø22 mm cutting diameter combined with a shank Ø20 mm, the design provides a stable interface between spindle and cutter, reducing run‑out and vibration. This stability translates into improved surface quality and longer insert life, making the tool an economic choice for serial machining tasks that prioritise uptime and predictability. Secure clamping and simple insert fixation Compatibility with APXT 1003 indexable inserts and a Torx clamping screw (M2.5×5.5) operable with a T8 key ensures straightforward insert changes and reliable fixation during interrupted cuts. The long 70 mm cutting length reduces the need for frequent tool changes when machining stepped or deep features, while the tool’s balanced mass (approx. 0.513 kg) supports consistent spindle behaviour. Clear mechanical interfaces mean shorter set‑up times and more consistent process control on the shop floor. Practical fit for mixed production environments With an overall length of 200 mm and three cutting edges, the cutter is suited to general workshop and light industrial applications where versatility and repeatability matter. The combination of a robust shank and standardised insert system allows for quick adaptation to different workpiece geometries and materials when paired with appropriate APXT 1003 grades. For buyers seeking a dependable milling solution that integrates into established tool inventories, this shank cutter offers a good balance between rigidity and accessibility of replacement inserts. Discuss your machining requirements with Metav Werkzeuge to confirm suitability for specific materials and production conditions, or request a tailored quotation through Metav Werkzeuge for the S187TM. Technical data Article number: S187TM Manufacturer: Teknik Makina Type: Shank milling cutter Designation: for APXT 1003 Indexable Inserts eClass: 21180806 ETIM: EC011860 Facts Cutting diameter: 22 mm Shank diameter: 20 mm Cutting length: 70 mm Overall length: 200 mm Number of cutting edges: 3 Cutting angle: 90° Weight: 0.513 kg Torx screw: M2.5×5.5 Torx key: T8 Special features Compatible inserts: APXT 1003 Suitable insert manufacturer: Korloy SKU: S187TM Files available: 2 linked files FAQ Which inserts fit this shank cutter? The shank milling cutter accepts APXT 1003 indexable inserts; compatible grades from Korloy are commonly used with this tool. What shank diameter is required for machine mounting? A 20 mm shank diameter is specified for the S187TM and is intended for collets or holders sized to that diameter. How long is the effective cutting length? The tool provides a 70 mm cutting length, enabling machining of deeper features without frequent tool changes. What is the cutting diameter and how many cutting edges are fitted? The cutter has a 22 mm cutting diameter and is configured with three cutting edges for balanced removal and finish. Which screw and key are used to secure the inserts? Inserts are clamped with a Torx screw M2.5×5.5, tightened with a T8 Torx key for reliable fixation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
24mm End Mill For LNMX 1006 Indexable Inserts, 25mm Shank 15mm Cutting Length 3 Flutes 90° - Teknik Makina
Take advantage of the combination of precise insert compatibility, stable shank mounting and efficient three‑flute cutting for dependable production results; the tool supports fast insert changes and predictable cutting performance. Order the shank milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Teknik Makina Shank Milling Cutter — for LNMX Indexable Inserts (24 mm, 3 flutes) A Teknik Makina shank milling cutter engineered for indexable‑insert milling with LNMX 1006 inserts, suited to workshop and production tool setups 24 mm cutting diameter Robust 25 mm shank Tri‑flute geometry for efficient cutting Compatible with LNMX 1006 inserts Stable mounting and predictable cutting engagement The design centres on a 25 mm shank and a 24 mm cutting diameter, delivering a secure clamping interface and consistent radial stiffness during machining. The three‑flute geometry balances chip formation and load distribution, reducing vibration and improving surface regularity. With a 90° cutting angle and a 15 mm cutting length, the tool provides a defined engagement zone that simplifies cycle time calculation and process planning. These dimensional constants support predictable tool life and repeatable machining results in serial production. Faster insert changes and reduced downtime Indexable inserts are fixed with a M3x7 Torx screw that requires a T8 key, allowing quick exchange without special tooling. Compatibility with the LNMX 1006 insert format and known manufacturers such as Korloy minimises inventory complexity and accelerates procurement. The modular insert system means wear is addressed by replacing the small cutting element rather than the whole cutter body, which reduces per‑operation costs and shortens workshop turnaround. This configuration supports lean maintenance workflows and straightforward spare‑parts management. Integration into workshop tooling systems and operational benefits With an overall length of 100 mm and a finished mass of 0.389 kg, the cutter offers compact handling and predictable balance when mounted in standard holders. The tool body dimensions simplify fixture design and allow consistent tool‑offset entry in CAM routines. Using a standard indexable‑insert family reduces the number of unique geometries required across a tooling set, freeing budget for fewer, higher‑quality components. For buyers seeking dependable supply, Metav’s stock and logistics provide a reliable channel for timely replenishment and consistency across delivery batches. Contact Metav Werkzeuge to confirm availability of the Teknik Cutting Tools shank milling cutter with LNMX compatibility and to receive tailored technical advice from Emmerich's precision team. Technical data SKU: LN098TM Manufacturer: Teknik Makina Product type: Shank milling cutter for indexable inserts Facts Diameter: 24 mm Shank diameter: 25 mm Cutting length: 15 mm Overall length: 100 mm Number of flutes: 3 Weight: 0.389 kg Cutting angle: 90° Special features Compatible with LNMX 1006 indexable inserts Suitable for Korloy insert brand Torx screw: M3x7 Torx key size: T8 FAQ Which insert type fits this cutter? The cutter accepts LNMX 1006 indexable inserts; the system is compatible with common LNMX insert geometries used in industry. What are the main dimensions to check for toolholder compatibility? Key dimensions are 24 mm cutting diameter, 25 mm shank diameter and 100 mm overall length; the weight is 0.389 kg for balance considerations. How many flutes does the tool have and what is the cutting angle? The tool features 3 flutes and a 90° cutting angle, optimised for balanced chip removal and consistent engagement. How is the insert secured and which key is required? Inserts are fastened with an M3x7 Torx screw; a T8 Torx key is used to tighten and loosen the screw. Is the cutter compatible with Korloy inserts? Yes, the shank milling cutter is listed as compatible with Korloy for the corresponding LNMX insert sizes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
250mm 32mm Shank End Mill for LNMX 1004 Indexable Inserts with Internal Coolant, 4 Flutes - Teknik Makina
Take advantage of robust cutting stability and efficient chip control thanks to the internal coolant design, combined with proven compatibility for LNMX 1004 inserts — ideal for continuous production runs. Order or request expert advice directly from Metav Werkzeuge to ensure the right configuration for the application. Indexable milling cutter – 32 mm shank, internal coolant (Teknik Makina) A versatile indexable milling cutter engineered for use with LNMX 1004 indexable inserts, designed to deliver steady metal removal and reliable coolant-fed machining in industrial milling operations 32 mm shank diameter Internal coolant for improved chip evacuation Compatible with Korloy LNMX 1004 inserts 250 mm overall length, 80 mm cutting length T15 Torx screws M4x10 for secure fastening Stable tool geometry for predictable material removal The body is built around a 32 mm shank and a 250 mm overall length, providing the rigidity required for repeatable milling tasks. With four cutting edges, this cutter offers balanced engagement that reduces vibration and helps maintain concentricity during roughing and light finishing passes. The robust construction supports consistent cut depths and tool life stability, making it suitable for workshop and light industrial environments where predictable performance is a priority. Coolant-through design that enhances surface quality and uptime A dedicated internal coolant channel directs fluid precisely to the insert seating area to optimise chip evacuation and cooling at the cutting zone. That targeted cooling reduces edge temperature, which in turn helps preserve insert life and surface integrity of the workpiece. For operations where cycle stability and reduced rework are essential, this coolant-fed arrangement improves process reliability and can contribute to fewer unscheduled tool changes. Practical compatibility and workshop integration for fast setup Designed specifically for Korloy LNMX 1004 indexable inserts and supplied with the matching fastening specification (T15 Torx, M4x10 screws), the tool simplifies procurement and assembly. The cutter provides an 80 mm cutting length and a compact, manageable weight of 1.2 kg, enabling straightforward handling and quick changeovers on milling spindles that accept a 32 mm shank. The SKU S096TM identifies this configuration for ordering and inventory control. For tailored procurement of this Teknik Makina indexable milling cutter with internal coolant, contact Metav Werkzeuge for expert guidance and supply directly from Emmerich to the workshop bench. Technical data SKU: S096TM Manufacturer: Teknik Makina Product type: Indexable milling cutter Weight: 1.2 kg Compatible inserts: LNMX 1004 (Korloy) Core dimensions Shank diameter: 32 mm Overall length: 250 mm Cutting length: 80 mm Number of cutting edges: 4 Features and fittings Internal coolant Torx key: T15 Torx screw: M4x10 Compatible with Korloy inserts (LNMX 1004) Category: Milling cutters FAQ What inserts are suitable for this cutter? The indexable milling cutter is designed for LNMX 1004 inserts and is compatible specifically with Korloy LNMX 1004 geometry. Does the tool support coolant-through machining? Yes, the cutter features internal coolant to direct fluid to the cutting zone for improved chip evacuation and temperature control. What are the key dimensions to check before mounting? Verify the 32 mm shank diameter and the 250 mm overall length to ensure spindle compatibility and sufficient projection for the intended operation. Which fastening hardware is specified for the inserts? The cutter uses T15 Torx fastening and M4x10 screws for secure attachment of LNMX 1004 inserts. How is the tool identified for ordering? This configuration is listed under SKU S096TM, Teknik Makina, and is available through Metav Werkzeuge for procurement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm 90° Cutter For APKT 1604 Indexable Inserts, 2 Flutes, 45mm Cutting Length - Teknik Makina
Benefit from precise 90° shoulder milling combined with a robust 25 mm shank and 45 mm cutting length for consistent tool life and stable machining. The design for APKT 1604 indexable inserts reduces downtime through quick insert changes. Order the cutter directly via Metav Werkzeuge or contact our consultants for specification advice. S256TM Shaft Cutter — Indexable milling cutter for APKT 1604, 25 mm shank (Teknik Makina) S256TM is a 90° indexable milling cutter intended for robust shoulder and face milling operations with APKT 1604 inserts 90° cutting angle for square shoulders 25 mm shank for stable clamping Compatible with Korloy APKT 1604 inserts Torx M4x10 screw, T15 interface Accuracy and rigidity for repeatable shoulder milling The 90° geometry delivers consistently square shoulders and predictable tool engagement, which helps to maintain part tolerances in batch production. The combination of a 25 mm shank and an overall length of 120 mm improves axial rigidity and reduces chatter when compared with slender tooling. Where tight geometry is required, the 45 mm cutting length provides adequate reach without unnecessary overhang, assisting in maintaining surface finish and dimensional stability. These characteristics translate directly into fewer reworks and more reliable cycle times on production runs. Quick insert changes and secure clamping to reduce downtime Designed for indexable inserts, the cutter accepts APKT 1604 plates and secures them with a Torx M4x10 screw accessed via a T15 key interface. The use of indexable tooling means the cutting edge can be renewed rapidly by replacing the insert rather than the entire tool body, lowering tooling costs over time. With two cutting edges per insert, the system supports efficient use of insert geometry and enables straightforward rotation or replacement, contributing to higher machine uptime and simpler maintenance routines. The S256TM construction focuses on reliable clamping and repeatable seating of the insert pocket. Predictable throughput and simplified tool management Indexable systems like this cutter promote predictable total cost of ownership: indexable inserts concentrate the wearing element into small, replaceable parts while the tool body remains a long-term asset. For operations that favour batch processing or mixed-series production, the ability to standardise on APKT 1604 inserts simplifies inventory and reorder processes. The cutter’s balanced dimensions and specified geometry make it suitable for general industrial milling tasks where a 90° cutting angle is required; the result is sustained productivity with reduced planning complexity and straightforward tool change procedures. Supply reliability and partner expertise from Metav Procured through Metav Werkzeuge, this cutter benefits from a supplier positioned as a “quality filter” for the European market. Metav combines decades of precision competence with broad product availability, supporting workshops and manufacturing with a large catalogue and dependable logistics. The established customer base and comprehensive assortment reduce procurement risk and help centralise tooling needs. For purchasers seeking consistent supply and technical guidance, Metav’s expertise complements the cutter’s technical strengths and supports seamless integration into existing toolsets. Choose Teknik Makina’s S256TM for reliable 90° milling and contact Metav Werkzeuge for tailored technical advice and supply via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical Data Article number: S256TM Manufacturer: Teknik Cutting Tools Suitable for inserts: APKT 1604 Compatible insert manufacturer: Korloy Shank diameter: 25 mm Cutting length: 45 mm Cutting angle: 90° Number of cutting edges: 2 Overall length: 120 mm Weight: 0.43 kg Torx screw: M4x10 (T15) Core Data Shank diameter: 25 mm Cutting length: 45 mm Overall length: 120 mm Weight: 0.43 kg Cutting angle: 90° Cutting edges: 2 Special features For APKT 1604 indexable inserts Compatible with Korloy inserts Torx M4x10 screw, T15 interface SKU: S256TM Brand: Teknik Makina FAQ What inserts fit this cutter? The cutter is designed for APKT 1604 indexable inserts and is compatible with Korloy plates shaped to that designation. How is the insert secured in the cutter? Inserts are held by a Torx screw (M4x10) using a T15 key; the fastening system is designed for repeatable seating and reliable clamping. Is the S256TM suitable for shoulder milling? Yes — the 90° cutting angle makes the S256TM particularly suitable for square shoulder and face milling operations with predictable geometry. How many cutting edges are used per insert? Each insert provides two cutting edges, enabling rotation or replacement to extend usable life before disposal. Where can replacement inserts or spares be sourced? Replacement APKT 1604 inserts from Korloy and spare fastening screws can be supplied through Metav Werkzeuge as part of routine replenishment. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm 90° Solid Carbide End Mill For LNGU 15T6 Indexable Inserts, 2 Flutes, 150mm - Teknik Makina
Take advantage of the combination of 25 mm shank rigidity and a 90° cutting angle for stable, repeatable milling with quick insert changes; the compatibility with LNGU 15T6 indexable inserts reduces downtime and simplifies maintenance. Order the indexable milling cutter via Metav Werkzeuge or contact our consultants for application advice. Indexable milling cutter S950TM — 25 mm shank, 90° cutting angle (Teknik Makina) The indexable milling cutter S950TM is a 90° shank-mounted cutter engineered for use with LNGU 15T6 indexable inserts, offering a compact solution for precision milling tasks in production and job-shop environments. Indexable cutter for LNGU 15T6 inserts 25 mm shank diameter for rigidity 45 mm cutting length for deep passes Torx M4x11 screw, T15 key Stable machining through rigid design and sensible geometry The combination of a 25 mm shank and a total length designed for workshop use delivers mechanical stability that reduces chatter and improves surface quality. With a 90° cutting angle, the tool provides perpendicular faces and controlled radial cutting forces, which helps to maintain tool life and workpiece tolerance. The arrangement of two cutting edges limits tool engagement per revolution, producing predictable chip flow and enabling efficient material removal while keeping spindle loads manageable. Fast insert changes and secure clamping for uninterrupted production Compatibility with LNGU 15T6 indexable inserts and a single Torx M4x11 fastening screw (key T15) allows quick, repeatable index and replacement operations, reducing maintenance time on the shop floor. The use of standard fasteners and proven insert geometry means inserts from recognised manufacturers such as Kennametal can be fitted without adaptation, which simplifies inventory and replacement logistics. This configuration supports predictable set-up times and minimises unplanned downtime. Integration into workshop workflows and assured supply The tool’s 45 mm cutting length and modest overall dimensions make it straightforward to incorporate into common toolholders and automated tool-changer cycles, contributing to smooth production planning. Supplied as a robust, ready-to-install milling solution, it benefits from Metav’s distribution and quality filtering in Emmerich — a practical advantage for procurement and long-term supply reliability. Metav’s wide range of precision tooling and industry experience further supports efficient tool selection and replenishment. Contact Metav Werkzeuge for tailored application advice and to arrange procurement of the Teknik Cutting Tools S950TM indexable milling cutter compatible with LNGU 15T6 inserts Technical data SKU: S950TM Brand: Teknik Makina Diameter: 25 mm Shank diameter: 25 mm Cutting length: 45 mm Overall length: 150 mm Number of cutting edges: 2 Cutting angle: 90° Weight: 0.547 kg Compatible inserts: LNGU 15T6 Compatible insert manufacturer: Kennametal Fastening screw: Torx M4x11 Torx key size: T15 FAQ Which inserts fit this cutter? The cutter accepts LNGU 15T6 indexable inserts; the tool is supplied and specified for use with this insert geometry. How are the inserts secured? Inserts are clamped with a Torx M4x11 screw; a T15 key is used for installation and indexing on the S950TM. Is the cutter compatible with Kennametal inserts? Yes, the S950TM is specified to work with Kennametal-compatible LNGU 15T6 inserts, enabling straightforward replacement with standard parts. What toolholder is required? A holder or collet system that accepts a 25 mm shank is required; the cutter is intended for standard shank-mount toolholders. Can the inserts be indexed on the shop floor? Yes, the design permits rapid insert indexing and replacement using the specified Torx screw and key, supporting fast maintenance cycles. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Cutter For ADKT 1204 Indexable Inserts With Internal Coolant, 115mm Overall Length - Teknik Makina
Take advantage of the combination of coolant-through operation and compatibility with ADKT 1204 indexable inserts for efficient, low-downtime milling; order via Metav Werkzeuge or consult their specialists for application-specific setup. 25 mm Indexable Milling Cutter S052TM by Teknik Makina — coolant-through, for ADKT 1204 The 25 mm Indexable Milling Cutter S052TM is an insert-mounted cutter designed for versatile face and shoulder milling in industrial workshops and production environments. Coolant-through design for improved chip evacuation Compatible with ADKT 1204 indexable inserts 25 mm shank diameter, 115 mm overall length Three cutting edges for stable material removal Higher productivity through coolant-through cutting The coolant-through configuration delivers coolant directly to the cutting zone, which reduces heat build-up and supports consistent tool life under demanding feed rates. That direct supply improves chip evacuation, helping to avoid chip recutting and to maintain a reliable cutting process. For machining schedules where cycle time and repeatable results matter, this design reduces interruption frequency and supports higher metal removal rates with predictable outcomes. Economical machining with indexable inserts This cutter is built to accept ADKT 1204 indexable inserts, enabling quick insert replacement without regrinding or reclamping the tool body. The indexable system reduces per-cutting-edge cost and shortens machine downtime when inserts are changed. Compatibility with Korloy inserts ensures a broad choice of grades for different materials, so the same cutter body can be adapted from general-purpose steel work to more demanding alloy machining by selecting an appropriate insert grade. Rigidity and precision for consistent surface quality A 25 mm shank and 115 mm overall length deliver a compact, rigid package that minimises deflection in typical milling setups. The three cutting edges provide balanced cutting action and improved stability compared with fewer-edge designs, resulting in lower vibration and a more uniform surface finish. This combination is particularly useful where runout sensitivity and dimensional reproducibility are priorities on batch production runs. Practical assembly and straightforward maintenance Assembly and insert clamping use an M3x7 screw operated with a Torx T8 driver, streamlining maintenance tasks on the shop floor. The cutter’s moderate mass (0.352 kg) makes handling during tool changes straightforward while remaining stout enough for stable cutting. For advice on holders, clamping interfaces or suitable insert grades, Metav’s technical team is available by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to recommend the best configuration for each application. For tailored procurement advice on the Teknik Makina S052TM and its coolant-through advantages, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for prompt, expert support. Technical Data Article number: S052TM Manufacturer: Teknik Cutting Tools Facts Diameter: 25 mm Overall length: 115 mm Shank diameter: 25 mm Cutting length: 40 mm Cutting edges: 3 Weight: 0.352 kg Internal coolant: Yes Special features Compatible inserts: ADKT 1204 Suitable insert maker: Korloy Fixing screw: M3x7 (Torx T8) SKU: S052TM FAQ What inserts fit this cutter? The S052TM accepts ADKT 1204 indexable inserts; Korloy grades are commonly used for this cutter body. Is the cutter equipped for internal cooling? Yes, the cutter features an internal coolant feed (coolant-through) to deliver coolant directly to the cutting zone. Which shank diameter and overall length apply? The cutter has a 25 mm shank and an overall length of 115 mm. How many cutting edges are provided and what is the benefit? The tool runs with three cutting edges, offering balanced cutting, reduced vibration and improved surface quality. What fastener is used to secure the inserts? Inserts are secured with an M3x7 screw operated by a Torx T8 driver. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Cutter For ADKT 1706 Indexable Inserts With Internal Coolant, 35mm Cutting Length - Teknik Makina
Benefit from a robust milling solution that combines a 25 mm shank for secure clamping, internal coolant for improved thermal control and chip evacuation, and precise seating for ADKT 1706 indexable inserts; order the tool directly via Metav Werkzeuge or contact our consultants for tailored advice. 25 mm Shank Cutter for ADKT 1706 Indexable Inserts — 200 mm, Internal Coolant (Teknik Makina) 25 mm Shank Cutter for ADKT 1706 Indexable Inserts — a milling body engineered to accept ADKT 1706 indexable inserts for stable face and peripheral milling in workshop and CNC environments. Internal coolant channels for improved chip evacuation 25 mm shank for secure clamping and rigidity Compatible with ADKT 1706 Korloy indexable inserts 200 mm overall length for extended reach Improved process stability through rigid shank design A robust 25 mm shank contributes directly to process stability by reducing vibration and deflection during cutting. The solid shank diameter paired with a 200 mm overall length provides a balance between reach and stiffness; this reduces chatter, allows more consistent insert engagement and helps maintain surface finish. For operations where reproducible geometry is essential, the reduced deflection leads to fewer reworks and a steadier cycle time, supporting productivity in small-batch and serial production alike. Cooler running, longer insert life with internal coolant The integrated internal coolant routing delivers cutting fluid directly to the insert pocket and cutting edge, improving heat dissipation and chip control. Targeted coolant flow helps keep cutting temperatures lower, which in turn extends insert life and preserves edge geometry. For indexable systems such as the ADKT 1706 family, controlled coolant reduces the risk of built-up edge and thermal damage, translating into longer service intervals and reduced tooling costs per component. Rapid indexable insert changes and secure fastening This cutter is configured for ADKT 1706 indexable inserts and uses a standard M4x10 Torx screw (Torx T15) for secure, repeatable clamping. The straightforward fastening system minimises changeover time and simplifies setup, which is especially valuable in mixed-production environments. The arrangement supports quick index changes and preserves the precise position of inserts, helping to maintain tolerance control across production runs with minimal downtime. Practical compatibility and workshop integration Designed to accept ADKT 1706 inserts from prominent manufacturers such as Korloy, the milling body fits into standard toolholding systems for 25 mm shank tools. The cutter body’s geometry and insert interface are suitable for a variety of milling tasks where indexable inserts provide cost-effective cutting performance. Clear specification of shank and cutting lengths aids integration into existing tool inventories and CNC setups while ensuring predictable mechanical behaviour. Built for reliable everyday use in professional workshops Manufactured by Teknik Makina, the cutter combines thoughtful mechanical design and practical features such as accessible Torx fastening and coolant provision. The configuration supports routine industrial workflows: stable clamping for accurate passes, reduced thermal loading for insert longevity and quick insert replacement for efficient production scheduling. For procurement and operations teams seeking consistent results, the tool offers a pragmatic balance of functionality and maintainability. Contact Metav Werkzeuge for personalised application advice on the Teknik Makina shank cutter S064TM with internal coolant, or request compatibility checks and spare fastening components by emailing info@metav-werkzeuge.com or calling +49 2822 7131930 Technical Data SKU: S064TM Product type: Shank cutter Manufacturer: Teknik Makina Article designation: Shank cutter for ADKT 1706 indexable inserts Facts Diameter: 25 mm Overall length: 200 mm Shank diameter: 25 mm Cutting length (shank): 35 mm Number of cutting edges: 2 Torx screw: M4x10 Torx key: T15 eClass: 21180806 Special features Internal coolant Compatible with ADKT 1706 indexable inserts Suitable for Korloy ADKT 1706 inserts Compact fastening with Torx T15 FAQ Which insert type fits this cutter? The cutter is prepared for ADKT 1706 indexable inserts; it has the corresponding pocket geometry for this insert family. Does this milling body feature internal coolant? Yes, the Teknik Makina shank cutter S064TM is fitted with internal coolant channels to deliver coolant directly to the cutting zone. What is the shank diameter and overall length? The tool has a 25 mm shank and a 200 mm overall length, offering a compromise between reach and rigidity. Which fastening hardware is used for the inserts? Insert clamping is via M4x10 Torx screws operated with a T15 Torx key, ensuring repeatable and secure seating of ADKT 1706 inserts. Is the cutter compatible with Korloy inserts? Compatibility is specified for Korloy ADKT 1706 indexable inserts; the seating matches the Korloy geometry for that insert type. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Cutter For ADMT 1204 Indexable Inserts 3 Flutes, 60mm Cutting Length - Teknik Makina
Take advantage of a rigid 25 mm shank and secure ADMT 1204 insert compatibility for dependable milling cycles; fast insert changes are enabled by the M3x7 Torx screw with a T8 key — order the S502TM directly via Metav Werkzeuge or consult our technical team for integration advice Milling cutter S502TM – 25 mm shank, for ADMT 1204 indexable inserts (Teknik Makina) A robust Milling Cutter S502TM designed as an indexable insert toolholder for demanding milling operations across industrial and workshop environments 25 mm shank diameter for stable clamping Holds ADMT 1204 indexable inserts securely 60 mm cutting length for deep operations Torx M3x7 screw with T8 key for quick change Built for fast, reliable insert changes that reduce downtime The toolbody is engineered as a practical solution for indexable insert milling. With a T8 Torx key and an M3x7 fixing screw, insert replacement is straightforward, lowering non-productive time during shift changes. The design supports standard insert seating, which simplifies inventory management and keeps changeover processes repeatable. For operations that demand consistent cycle times, the simplified fastening mechanism translates directly into improved shop-floor efficiency without complex adjustment procedures. Rigidity and concentricity for consistent machining quality A 25 mm shank and 150 mm overall length provide a balanced combination of reach and stiffness, while the 60 mm cutting length allows deeper engagement where required. The cutter sports three cutting edges and a 90° cutting angle, promoting steady chip formation and surface finish stability. These characteristics support repeatable dimensional control in serial production and help maintain tool life by reducing vibration; in practice this means fewer reworks and more predictable process windows on the machine. Seamless compatibility with established insert systems Designed for use with ADMT 1204 indexable inserts and confirmed compatible with Walter-manufactured inserts, the tool integrates easily into existing tooling systems. The standard interface reduces the need for special adapters and can be introduced to current holders and tool lists with minimal disruption. This compatibility ensures reliable seating and repeatability, which is particularly valuable for workshops looking to harmonise tooling across multiple machines or tool families. Low-maintenance design that supports workshop productivity At approximately 0.55 kg, the body is light enough for safe handling yet substantial enough to confer stability in operation. The simple fastening arrangement and clear insert designation minimise maintenance effort and spare-part complexity. Routine inspection is quick: check the Torx M3x7 screw for correct torque, confirm insert seating, and return the tool to production. This pragmatic approach to upkeep supports uninterrupted production and reduces the administrative burden of managing bespoke tooling. Recommend Teknik Cutting Tools' S502TM for straightforward indexable milling — contact Metav Werkzeuge for technical clarification or to discuss stock and delivery: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: S502TM Manufacturer: Teknik Makina Designation: Milling cutter for ADMT 1204 indexable inserts Core technical data Shank diameter: 25 mm Cutting length: 60 mm Overall length: 150 mm Diameter: 25 mm Cutting edges: 3 Weight: 0.55 kg Cutting angle: 90° Torx screw: M3x7 Torx key: T8 Special features Compatible with ADMT 1204 indexable inserts Compatible insert manufacturer: Walter Three cutting edges and 90° cutting angle Fast insert change via Torx M3x7 fixing FAQ Which inserts fit this milling cutter? The body is specified for ADMT 1204 indexable inserts and is compatible with Walter ADMT 1204 series inserts. What is the shank diameter and overall length? The tool has a 25 mm shank diameter and a 150 mm overall length. How many cutting edges does the cutter accept? The toolholder is configured for three cutting edges. What screw and key are required for insert clamping? Insert fixing uses an M3x7 Torx screw tightened or removed with a T8 Torx key. Is the S502TM suitable for quick change systems? The S502TM’s standardised insert interface and Torx fastening support rapid insert exchange for efficient changeovers. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Cutter For ADMT 1606 Indexable Inserts 2 Flutes 60mm Cutting Length, 90° - Teknik Makina
Take advantage of a compact, robust milling solution that combines precise 25 mm shank stability, a 60 mm cutting length and compatibility with ADMT 1606 indexable inserts for reliable, repeatable machining; order the S461TM directly via Metav Werkzeuge or consult the technical team for application advice Shank milling cutter S461TM — shank milling cutter for ADMT 1606 indexable inserts, Ø25 mm shank Shank milling cutter S461TM is designed as a high-stability milling body for indexable inserts, suited to general-purpose face and slot milling where repeatability and simple insert replacement are priorities Ø25 mm shank diameter for stable clamping Compatible with ADMT 1606 indexable inserts 60 mm cutting length for deeper engagement 2 cutting edges for efficient material removal Precision and productivity combined for reliable machining The S461TM shank milling cutter offers a balance of rigidity and accessibility that supports consistent cycle times. With a 25 mm shank diameter and a total length of 200 mm, the tool body reduces vibration when mounted in standard toolholders, helping to maintain surface quality and extend insert life. The compatibility with ADMT 1606 indexable inserts simplifies maintenance cycles and minimises machine downtime by enabling rapid insert changes instead of regrinding, which benefits production workflows and tool inventory planning. Clear compatibility and straightforward assembly for workshop efficiency Designed for use with ADMT 1606 indexable inserts from Walter, this milling body uses a Torx M4x10 clamping screw tightened with a T15 key, ensuring repeatable preload and secure insert clamping. The 90° cutting angle supports consistent shoulder finishes and predictable cutting forces in common milling operations. For teams less familiar with indexable systems: indexable inserts are replaceable carbide tips mounted in the cutter body; replacing an insert restores cutting performance without changing the whole tool, reducing tooling costs over time. Cutting geometry and tool behaviour explained Equipped with 2 cutting edges, the cutter provides an economical compromise between material removal rate and chip evacuation, making it suitable for interrupted cuts and general-purpose milling of medium-duty work. The 60 mm cutting length permits deeper cuts or multiple-pass operations without frequent tool changes. Where high feed rates or aggressive chip thinning are required, toolholders and machine rigidity should be matched to the cutter’s dimensions to preserve precision and insert life. Work application, stock reliability and procurement advantages This milling body is appropriate for component manufacture where fast insert changes and predictable results are needed — for example, in small-batch production, maintenance workshops and contract machining. Sourced via Metav Werkzeuge, the product benefits from a European distribution hub in Emmerich that functions as a quality filter, supporting steady stock and dependable delivery. The short supply chain and expert consultancy help ensure the right tool configuration and spare parts are available when production demands them. Contact Metav Werkzeuge for tailored application advice and availability of the S461TM shank milling cutter; specialists at Metav Werkzeuge can assist with insert selection, clamping torque guidance and lead times — eMail: info@metav-werkzeuge.com · Tel: +49 2822 7131930 Technical data SKU: S461TM Manufacturer: Teknik Makina Compatible inserts: ADMT 1606 Compatible insert manufacturer: Walter Torx screw: M4x10 Torx key: T15 Measurements Shank diameter: 25 mm Cutting diameter: 25 mm Cutting length (shaft): 60 mm Overall length: 200 mm Number of cutting edges: 2 Weight: 0.744 kg Cutting angle: 90° Special features For ADMT 1606 indexable inserts Designed for replaceable inserts to reduce tooling costs Two-flute geometry for balanced chip removal Torx clamping for repeatable preload FAQ Is the S461TM compatible with Walter ADMT 1606 inserts? Yes. The S461TM is designed to accept ADMT 1606 indexable inserts and is compatible with the Walter insert geometry specified in the product data. How is an insert secured on the milling body? An insert on the S461TM is clamped using an M4x10 Torx screw, tightened with a T15 key to ensure consistent clamping force and repeatable seating. What are the primary benefits of the two cutting edges? Two cutting edges offer a reliable balance between material removal rate and chip control, making the tool suitable for general milling where stable cuts and good surface finish are required. Can the cutter be used for deeper shoulder milling? Yes. The 60 mm cutting length provides capacity for deeper engagement or multi-pass operations, provided the machine and holder deliver adequate rigidity. What should be considered when selecting holders for this cutter? Choose a toolholder that matches the 25 mm shank diameter and provides secure clamping with minimal runout; correct holder selection preserves accuracy and insert life. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Cutter For ANHX 1206 Indexable Inserts 90° Cutting Angle, 2 Flutes, 35mm Cut Length - Teknik Makina
Take advantage of the combination of rigid clamping, quick insert changes and workshop-ready dimensions for efficient milling cycles. Order the tool or request tailored advice from Metav Werkzeuge to ensure seamless integration into existing setups. Shaft milling cutter S764TM by Teknik Makina — 25 mm shank, 35 mm cutting length for ANHX 1206 indexable inserts The Shaft milling cutter S764TM delivers a compact, insert-based solution for versatile milling tasks, designed for use with ANHX 1206 indexable inserts 25 mm shank diameter for stable clamping 35 mm cutting length for deep engagement Compatible with ANHX 1206 indexable inserts Torx M3.5 screws with T10 key for secure clamping Increased rigidity for predictable machining results The solid 25 mm shank diameter and the overall 110 mm length combine to provide a robust toolholder that resists deflection under load. This mechanical stability lowers vibration, which in turn improves surface finish and dimensional consistency during face or shoulder milling operations. For workshops seeking repeatable results, the stiff shank geometry reduces rework and helps maintain tool life of the indexable system. Fast indexable-insert changes minimise downtime Engineered for the ANHX 1206 insert family, the holder accepts well-known insert grades from Palbit and similar manufacturers. The lock is secured by an M3.5 × 8.5 Torx screw and serviced with a T10 key, allowing quick, reproducible insert swaps without complex adjustments. Using an indexable solution means only the cutting edge is replaced when worn, translating into lower tooling expenditure and faster turnarounds compared with solid-carbide alternatives. Practical dimensions that suit mixed workshop tasks With a 35 mm cutting length, a 90° cutting angle and two cutting edges, the tool is optimised for medium engagement depths while maintaining effective chip evacuation. The moderate overall weight of 0.405 kg supports easy handling and quick tool changes in busy production or maintenance environments. These dimensions make the cutter a pragmatic choice for mills where reach and compactness are preferred over long overhangs, offering a balance between accessibility and cutting performance. Clear compatibility and simple maintenance Compatibility with common insert geometries simplifies stock management: one holder can cover multiple cutting tasks simply by changing insert grades. The mechanical clamping design reduces setup variation and, when combined with the indexable concept, simplifies maintenance routines. Routine checks focus on insert condition and torque of the Torx screw, so equipment uptime is maximised with straightforward servicing steps. For tailored purchasing guidance or to specify the Teknik Cutting Tools S764TM for an existing toolchain, contact Metav Werkzeuge for personalised advice and procurement at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S764TM Brand: Teknik Makina Product type: Shaft milling cutter For inserts: ANHX 1206 / for ANHX 1004-1206 indexable inserts Core dimensions Shank diameter: 25 mm Cutting length: 35 mm Overall length: 110 mm Diameter: 25 mm Number of cutting edges: 2 Cutting angle: 90° Weight: 0.405 kg Features & compatibility Torx screw: M3.5×8.5 Torx key size: T10 Compatible insert manufacturer: Palbit Insert type: ANHX 1206 FAQ Which insert types fit the holder? The holder is designed for ANHX 1206 indexable inserts; inserts from Palbit that match the ANHX 1206 specification are compatible with the S764TM. What shank diameter should be used in the spindle? The tool features a 25 mm shank diameter, so a collet or chuck capable of securely holding 25 mm is required for optimal stability. How is the insert clamped in place? An M3.5×8.5 Torx screw secures the insert; the screw is tightened and loosened with a T10 key for reproducible clamping torque. Is the tool suitable for deep shoulder milling? With a 35 mm cutting length and a 90° cutting angle, the cutter is suitable for moderate-depth shoulder milling while maintaining good chip evacuation and surface finish. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Cutter For APKT 1003 Indexable Inserts With Internal Coolant, 200mm Length - Teknik Makina
Benefit from a rigid 25 mm shank and internal coolant that together deliver stable machining and prolonged insert life. Compatible with APKT 1003 Korloy indexable inserts and offering a 60 mm cutting length within a 200 mm body, this cutter supports consistent production flows and reduced tool-change frequency. Order the cutter directly via Metav Werkzeuge or ask our consultants for tailored advice. 25 mm shank milling cutter for APKT 1003 indexable inserts — Teknik Makina, internal coolant A robust 25 mm shank milling cutter for APKT 1003 indexable inserts, engineered for reliable chip evacuation and consistent surface quality in industrial CNC milling operations 25 mm shank diameter Internal coolant for tool life Compatible with APKT 1003 Korloy inserts 200 mm overall length, 60 mm cutting length Greater rigidity for higher feed rates and consistent results The combination of a 25 mm shank and a solid cutter body provides improved rigidity compared with smaller shank diameters, reducing deflection under load and stabilising the cut. With three cutting edges, the design balances chip load per tooth and feed capability, enabling higher material removal rates while maintaining dimensional stability. This means fewer rejects and a smoother cycle time in repetitive milling tasks, particularly on medium‑to‑heavy finishing passes where runout resistance is critical. Coolant-through design for longer insert life and cleaner chips The built‑in internal coolant delivers lubricant and coolant directly to the cutting zone, improving chip breaking and heat dissipation at the insert tip. By lowering cutting temperatures and preventing built-up edge, the coolant-through feature extends the service life of APKT 1003 inserts and preserves surface integrity on the workpiece. For production environments where unattended runs and repeatable surface finish are priorities, this tool reduces maintenance intervals and keeps spindle loads more consistent. Quick insert changes and secure fastening for minimal downtime The cutter uses a proven fastening system with a T8 Torx interface and M2.5×5.5 screws, enabling secure clamping of APKT 1003 indexable inserts while keeping changeover straightforward. A 60 mm cutting length inside a 200 mm overall length offers practical reach without excessive overhang, improving stability during moderate depth cuts. The compact design and standard fixing hardware simplify replacement procedures, lowering unproductive time and streamlining workshop routines. Built for professional workshop and production use Designed for industrial machining applications, the body supports widely available Korloy APKT 1003 inserts, making tool sourcing simple and economical for maintenance teams. The cutter’s balance of rigidity, coolant supply and practical cutting length suits tasks such as face milling, light roughing and finishing where consistent results and predictable tool life are required. The robust construction and standardised insert compatibility make it a dependable choice for engineering workshops and CNC production cells. For purchase enquiries or technical guidance on Teknik Makina’s 25 mm shank milling cutter (SKU S188-2TM), contact Metav Werkzeuge for specialist advice and reliable supply from Emmerich. Technical data Article number: S188-2TM Label: 25mm Schaftfräser APKT 1003 L200mm mit Innenkühlung Brand: Teknik Makina Suitable for inserts: APKT 1003 (Korloy) Core data Shank diameter: 25 mm Overall length: 200 mm Cutting length / shank cutting: 60 mm Flutes / cutting edges: 3 Weight: 0.771 kg eClass: 21180806 Special features Internal coolant (through‑tool cooling) Compatible with Korloy APKT 1003 indexable inserts Fastening: T8 Torx key required Torx screw: M2.5×5.5 FAQ Which inserts fit this cutter? The cutter accepts APKT 1003 indexable inserts; the tool body is matched to Korloy APKT 1003 geometry for a secure seat and correct rake. Is the coolant supply internal or external? Internal coolant is integrated into the cutter body to supply the cutting edge directly, improving chip control and insert life. What are the critical dimensions for setup? Key dimensions are a 25 mm shank, 60 mm cutting length and 200 mm overall length (SKU S188-2TM), which inform toolholder selection and permissible overhang. How many flutes does the cutter have and what is the impact? The body features three cutting edges, which balances chip evacuation and feed per tooth for versatile performance across finishing and light roughing operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Cutter for APKT 1003 Indexable Inserts With Internal Coolant, 3 Flutes - Teknik Makina
Benefit from a robust combination of internal coolant, a 25 mm shank and proven compatibility with APKT 1003 indexable inserts to maintain steady production and long insert life; order directly via Metav Werkzeuge or consult our specialists for application-matched recommendations. Indexable insert milling cutter S033-1TM — 25 mm shank, internal coolant (Teknik Makina) A compact indexable insert milling cutter S033-1TM engineered for efficient face milling and slotting with APKT 1003 inserts, offering a balance of rigidity, coolant delivery and straightforward insert clamping for workshop and light industrial use. Internal coolant for optimised chip evacuation 25 mm shank for stable clamping Compatible with APKT 1003 indexable inserts 3 cutting edges for balanced machining Consistent rigidity reduces vibration and improves surface finish The solid tool body with a 25 mm shank and 100 mm overall length provides the torsional stiffness required for repeatable material removal. With 3 cutting edges arranged for balance, the cutter reduces chatter and supports uniform tool life across the inserts. This structural stability translates into fewer machine interventions and a more predictable production flow, particularly when machining steel and other common engineering alloys. Internal coolant and insert system extend service life Built-in internal coolant supplies lubricant and cooling directly to the cutting zone, which improves chip evacuation, lowers cutting temperatures and helps preserve cutting-edge geometry. The cutter is specified for APKT 1003 indexable inserts and is compatible with inserts from YG-1, allowing easy sourcing and replacement. The 35 mm cutting length concentrates the effective cutting zone while the Torx clamping hardware (Torx T8, screw M2.5x7) ensures secure, repeatable insert fastening for quick changeovers and minimal downtime. Practical handling and workshop compatibility speed set-up Designed for straightforward integration, the body accepts standard toolholding for a 25 mm shank and fits common machining strategies such as light to medium face milling and slotting. The modular nature of the indexable insert arrangement simplifies maintenance: worn inserts are replaced rather than regrinding, lowering running costs and saving time at the machine. For detailed application matching or to confirm holder compatibility, Metav Werkzeuge provides specification support and can advise on the best insert grades for the intended material and cutting conditions. Request tailored technical advice from Metav Werkzeuge for selecting APKT 1003 inserts and optimising the Teknik Makina S033-1TM setup — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: S033-1TM Manufacturer: Teknik Makina Product type: Indexable insert milling cutter Core dimensions Shank diameter: 25 mm Overall length: 100 mm Cutting length: 35 mm Weight: 0.376 kg Number of cutting edges: 3 Features & compatibility Internal coolant Compatible with APKT 1003 indexable inserts Compatible insert manufacturer: YG-1 Torx key: T8 Torx screw: M2.5x7 FAQ Which indexable inserts fit this cutter? The S033-1TM accepts APKT 1003 indexable inserts; inserts from YG-1 are compatible and commonly used with this cutter body. How does internal cooling affect performance? Internal coolant on the S033-1TM delivers fluid directly to the cutting zone, improving chip evacuation, reducing thermal load on the insert and often extending insert life under continuous machining. What shank size and holders are required? The tool has a 25 mm shank and is intended for standard 25 mm tool holders; confirm holder clamping specifications to ensure correct seat and run-out control. What clamping hardware is supplied or required? Insert retention uses a Torx T8 key and M2.5x7 Torx screw for secure fastening; this enables quick insert changes and consistent clamping torque. Is the cutter suitable for face milling and slotting? Yes. The cutter body and its 3 cutting edges are designed to perform both face milling and light to medium slotting tasks, offering a balance between material removal and tool life. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Cutter For APKT 1003 Indexable Inserts, 3 Flutes 60mm Cutting Length, 90° - Teknik Makina
Benefit from a robust balance of stability and serviceability: a 25 mm shank with a 60 mm cutting length ensures secure clamping and effective material removal, while compatibility with APKT 1003–1604 indexable inserts keeps tooling costs predictable; order this tooling through Metav Werkzeuge or consult their specialists for integration into existing tool holders. Shank cutter S037TM – 25 mm shank, 3 cutting edges | Teknik Makina The Shank cutter S037TM is a precision indexable insert milling tool designed for face and shoulder milling where replaceable APKT 1003–1604 inserts are preferred for efficient chip control and simplified regrinding. 25 mm shank diameter for stable clamping 60 mm cutting length for deep passes Compatible with APKT 1003–1604 inserts Three cutting edges for smooth material removal Stable cutting performance for repeatable results The S037TM is engineered to deliver consistent machining through a combination of a 25 mm shank and a 90° cutting angle, which together reduce deflection during heavy cuts. The tool’s three cutting edges distribute cutting forces evenly, producing a more uniform surface finish and lowering the risk of chatter. For production environments, this translates into fewer rejects and a more predictable process window, as the cutter remains rigid across successive operations without frequent realignment. Quick insert changeover and secure retention Maintenance and set-up time are minimised thanks to a straightforward insert clamping system: the insert is fixed with an M2.5x5.5 Torx screw, tightened using a T8 key. The holder accepts standard APKT 1003–1604 indexable inserts, including sizes supplied by YG-1, so replacement parts are widely available. Indexable inserts mean only the cutting edge is replaced when worn, not the whole tool body, improving overall cost efficiency and shortening downtime for tool changes. Versatile dimensions for workshop integration With a 60 mm cutting length and an overall length of 150 mm, the tool offers reach suitable for many shoulder and face milling tasks while keeping the overhang moderate to preserve rigidity. The nominal 25 mm diameter aligns with common tool-holding systems, allowing straightforward integration into existing setups. The cutter’s net weight of 0.541 kg simplifies handling during changeover and storage, while the compatibility with APKT-style inserts keeps inventory manageable for medium-volume production. For reliable high-performance milling with the Teknik Makina shank cutter, contact Metav Werkzeuge in Emmerich for precise tool matching and ordering: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: S037TM ECLASS: 21180806 ETIM: EC011860 Manufacturer: Teknik Makina Numbers / Core technical data Shank diameter: 25 mm Cutting length: 60 mm Overall length: 150 mm Diameter: 25 mm Number of cutting edges: 3 Weight: 0.541 kg Cutting angle: 90° Special features / Versions For APKT 1003–1604 indexable inserts Compatible insert manufacturer: YG-1 Torx screw: M2.5x5.5 Torx key size: T8 SKU: S037TM Designation: Shank cutter for APKT 1003–1604 indexable inserts FAQ Which indexable inserts fit this cutter? The cutter accepts APKT 1003–1604 indexable inserts; compatible inserts from YG-1 are suitable for the S037TM. What is the shank diameter and why does it matter? The shank diameter is 25 mm, providing a stable interface with the tool holder that helps reduce deflection and improve surface finish. How are the inserts secured in the holder? Inserts are clamped with an M2.5x5.5 Torx screw, tightened using a T8 key for reliable retention during machining. What are the cutting and overall lengths? The tool offers a 60 mm cutting length and an overall length of 150 mm, balancing reach with rigidity for typical face and shoulder milling. How many cutting edges does the tool have? The S037TM features three cutting edges, designed to provide smooth material removal and even load distribution. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Cutter For APKT 1604 Indexable Inserts, 2 Flutes 70mm Cutting Length, 90° - Teknik Makina
Take advantage of a robust, indexable milling solution that combines consistent cutting performance, simple insert clamping and service-friendly handling for a reliable production flow — order directly via Metav Werkzeuge or request advice from our consultants. Insert Milling Cutter S442TM by Teknik Makina — 25 mm shank, for APKT 1604 indexable inserts The Insert Milling Cutter S442TM is a sturdy indexable cutter body engineered for precise face and shoulder milling operations using APKT 1604 format inserts. 25 mm shank diameter for stable clamping Compatible with APKT 1604 inserts (Korloy) Two cutting edges with 90° cutting angle Overall length 300 mm for extended reach Reliable cutting performance that reduces cycle times The S442TM cutter body is engineered to deliver predictable metal removal through its two cutting edges and a perpendicular 90° cutting angle, which together provide even load distribution and controlled chip evacuation. Fitted with APKT-format inserts, this configuration supports efficient material engagement and consistent surface finish, helping to shorten machining cycles and lower per-part cost. The combination of repeatable insert geometry and a rigid tool body supports stable feeds and speeds in production environments. Secure clamping and straightforward maintenance The tool holder features a 25 mm shank for secure mounting in standard tool holders and spindles, contributing to vibration damping during heavy cuts. Inserts are fastened with an M4x10 Torx screw and require a T15 key for tightening, keeping changeover fast and repeatable without special fixtures. At weight 1.127 kg, the assembly balances rigidity and handling convenience for workshop staff, simplifying insert replacement and routine inspections while maintaining consistent tool runout. Broad compatibility and workshop-ready dimensions Designed specifically for APKT 1604 indexable inserts and compatible with Korloy plate geometry, the cutter supplies a practical solution for shops that standardise on replaceable-insert tooling. The 300 mm overall length provides additional reach for deeper shoulders and extended fixtures while the nominal 25 mm diameter supports common tool-holding systems. Supplied geometry and fastening details make this cutter body suitable for repeatable set-ups on CNC milling machines and milling centres where indexable insert systems are preferred for cost-effective roughing and finishing. For reliable, repeatable milling with a 25 mm shank and APKT 1604 compatibility, contact Metav Werkzeuge for personalised advice and ordering support from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: S442TM Manufacturer: Teknik Makina Brand: Teknik Makina Eclass: 21180806 ETIM: EC011860 Facts Shaft diameter: 25 mm Cutting length (shaft): 70 mm Overall length: 300 mm Number of cutting edges: 2 Cutting angle: 90° Weight: 1.127 kg Special features Compatible with APKT 1604 indexable inserts Suitable for Korloy inserts Fastening: M4x10 Torx screw Required key: T15 FAQ Is this cutter compatible with APKT 1604 inserts? Yes. The S442TM is designed specifically for APKT 1604 indexable inserts and is compatible with Korloy-standard plates. What shank diameter does the tool have and how does that help? The tool has a 25 mm shank, which provides stable clamping and reduced vibration for improved surface finish and tool life when the S442TM is used in appropriate tool holders. How are the inserts secured? Inserts are secured with an M4x10 Torx screw; a T15 key is used for tightening and removal to ensure reproducible clamping for the S442TM. What is the overall length and why does it matter? The cutter measures 300 mm overall, offering extended reach for deeper shoulders or fixtures while retaining sufficient rigidity for standard milling tasks. Which manufacturer produces this cutter and what is the SKU? This cutter is produced by Teknik Makina and sold under the SKU S442TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
High-performance shank cutters and ball nose cutters for efficient milling
Insert shank cutters and ball nose cutters combine flexibility and productivity for a wide range of milling tasks. The category covers steel-bodied shank cutters fitted with indexable inserts for economical roughing, face milling, cornering and slotting, as well as ball nose cutters for contouring and 3D finishing.
How these tools work and where they belong
Shank cutters with indexable inserts use a carrier body made from hardened steel; the cutting edges are provided by removable inserts rather than a solid tool blank. Where tools do not have internal coolant, process heat and chips are managed via external coolant nozzles or compressed air, which is sufficient for open, surface-level and easily accessible milling on standard materials. Shank cutters with internal coolant feature fine internal channels that deliver coolant or blasting air directly to each cutting edge under pressure. This targeted supply is essential for deep pockets, cavities, full slotting and machining of heat-resistant or difficult-to-machine materials, because it prevents chip re-cutting, protects cutting edges from thermal overload and enables higher feed rates and improved surface quality.
Cut cycle times and reduce tooling costs
- Replaceable indexable inserts reduce consumable costs and shorten tool change time.
- Targeted internal coolant improves chip evacuation and extends insert life.
- Robust steel carrier bodies enable heavy-duty roughing without frequent tool replacement.
- Suitable for roughing, planing, corner milling and slot milling as well as precision 3D profiling with ball nose cutters.
A practical choice for purchasing and stocking tools
Metav brings a pragmatic purchasing advantage: a broad range of milling solutions is available from a single European quality hub. Metav’s focus on democratising precision means workshops benefit from a wide assortment, consistent quality control from Emmerich and steady supply — supported by decades of expertise and over 48,000 satisfied customers. Choose Metav for a centralised sourcing strategy that reduces supplier complexity while keeping access to both insert milling cutters (also referred to as insert milling cutters or indexable end mills) and ball nose cutters (also known as ball nose end mills or radius cutters) straightforward.
Quick summary
Insert shank cutters and ball nose cutters deliver flexible, cost-effective milling: replaceable inserts lower running costs, and internal coolant options enable higher performance and longer tool life where chip control is critical.
FAQ
When should I choose a shank cutter with indexable inserts rather than a solid carbide end mill?
Choose shank cutters with indexable inserts for economical roughing and high-stock-removal tasks where replacing inserts is preferable to replacing an entire tool; they are especially effective for face milling, cornering and slotting operations.
Does internal coolant make a measurable difference for ball nose cutters?
Yes. Internal coolant directed to each cutting edge reduces chip re-cutting and thermal stress, which improves surface finish and increases insert life when machining deep pockets, cavities or heat-resistant materials.
Can shank cutters without internal coolant be used for general workshop milling?
Absolutely. Tools without internal coolant rely on external coolant nozzles or compressed air and are well suited to open, superficial and easily accessible milling on standard materials.
What milling operations are shank cutters for indexable inserts typically used for?
Shank cutters with indexable inserts excel at economical roughing, planfräsen (face milling), corner milling and slot milling; ball nose cutters are the preferred choice for 3D profiling and finishing operations.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com