Efficient shaft cutters and ball nose cutters for versatile milling
Shaft cutters and ball nose cutters serve as robust rotating tools for roughing, face milling, corner milling and slotting, offering economical replacement of indexable inserts rather than whole solid tools. Available in versions with internal coolant to feed lubricant directly to each cutting edge or without internal coolant relying on external nozzles, these cutters ensure effective chip evacuation and thermal control suited to standard materials or deep pocket and cavity work. By preventing chip re-cutting and protecting cutting edges, they deliver higher feed rates, improved surface finish and extended tool life in demanding metalworking applications.
25mm Cutter For APMT 11T3 Indexable Inserts 3 Flutes 40mm Cutting Length, 90° - Teknik Makina
Take advantage of a robust combination of precision, durability and simple maintenance: the cutter’s 25 mm shank and 40 mm cutting length deliver stable setups and consistent face milling, while compatibility with APMT 11T3 indexable inserts reduces tooling changes and machining downtime. Order the tool directly via Metav Werkzeuge or consult the technical team for tailored recommendations. Shaft Milling Cutter S238TM – 25 mm shank, for APMT 11T3 indexable inserts by Teknik Makina The Shaft Milling Cutter S238TM is a solid shank milling cutter engineered for high‑stability face and shoulder milling using APMT 11T3 indexable inserts, suitable for general machining and light to medium roughing applications 25 mm shank for rigid clamping 40 mm effective cutting length Compatible with Korloy APMT 11T3 inserts Secured with M2.5x5.5 Torx screw (T8) Stable setups reduce rework and boost productivity A robust 25 mm shank and an overall length of 180 mm provide a secure mounting that limits runout and vibration. Reduced chatter directly translates into improved surface finish and extended insert life, which lowers per‑component cost. The cutter’s three cutting edges and 90° cutting angle mean consistent engagement in face and shoulder passes; this geometry is particularly effective when paired with the widely used APMT 11T3 indexable inserts, offering predictable chip control and repeatable results. The solid construction and balanced design support higher feed rates while keeping tool deflection to a minimum. Faster tool changes and predictable tool life for efficient workflows Designed for indexable inserts, the tool eliminates the need to regrind cutters between jobs: only replace the APMT 11T3 inserts when worn. The clamping uses an M2.5x5.5 Torx screw with a T8 key, enabling fast, secure insert changes and minimal downtime. This workflow reduces inventory complexity and training time for operators, as insert grades and edge geometries can be selected to match the application. With a weight of 0.749 kg, the cutter is easy to handle during presetting and tool preparation, supporting a faster throughput in busy production environments. Compatibility and handling that simplify shop‑floor routines Compatibility with Korloy inserts and the APMT 11T3 format ensures wide availability of grades for steel, stainless steel and non‑ferrous materials, allowing the shop to choose coatings and substrates for optimal wear resistance. The tool’s straightforward geometry and standardised insert format support predictable cutting forces and easy integration into existing tool libraries and CAM strategies. Clear labelling of core dimensions such as diameter 25 mm, cutting length 40 mm and total length 180 mm assists presetting and reduces programming errors, while the standard Torx fixing provides reliable clamping without exotic or specialised consumables. For high‑stability milling with Teknik Makina’s S238TM, contact Metav Werkzeuge for expert advice and reliable supply from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: S238TM Brand: Teknik Makina SKU: S238TM Data Shank diameter: 25 mm Cutting length: 40 mm Total length: 180 mm Diameter: 25 mm Cutting edges: 3 Weight: 0.749 kg Cutting angle: 90° Special features Compatible with APMT 11T3 indexable inserts Suitable for Korloy inserts Torx screw M2,5x5,5 Torx key size T8 FAQ What insert type does this cutter use? The cutter is designed for APMT 11T3 indexable inserts, a common format that allows quick insert replacement and a wide choice of grades. Is the S238TM suitable for shoulder milling on steel? Yes, the S238TM with a 90° cutting angle and three cutting edges is well suited to shoulder and face milling in steel using the correct insert grade. Which screw and key are needed for insert clamping? Insert clamping uses an M2.5x5.5 Torx screw and a T8 Torx key for secure and repeatable clamping of the inserts. Can this cutter be preset on standard tool holders? The 25 mm shank matches common holder systems for solid shank cutters, enabling straightforward presetting and reliable clamping in standard tool holders. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Cutter For APXT 1003 Indexable Inserts 90° Cutting Angle, 40mm Cutting Length, M2.5x5.5 Torx Screw - Teknik Makina
Take advantage of a stable 25 mm shank, a 40 mm cutting length and straightforward compatibility with APXT 1003 indexable inserts to improve cycle consistency and reduce downtime; order directly via Metav Werkzeuge or request specialist advice from our consultants. S169TM — 25 mm shank indexable milling cutter, compatible with APXT 1003 inserts (Teknik Makina) The S169TM is a solid-shank milling cutter engineered for efficient face and slot milling operations where APXT 1003 indexable inserts are used, combining a compact 25 mm diameter with a 90° cutting geometry for predictable machining results. 25 mm shank for stable toolholding 40 mm cutting length for deep engagement Compatible with APXT 1003 indexable inserts Torx screw M2.5x5.5 included, T8 key specified Consistent surface quality through stable design The shank’s 25 mm diameter and balanced overall length provide mechanical rigidity that translates into repeatable surface finish and dimensional stability. Combined with a true 90° cutting angle, the geometry is optimised for square shoulder operations and assures uniform chip evacuation when using the matched indexable inserts. This structural stability reduces vibration and tool deflection, which supports tighter tolerances and less rework in batch production. Faster servicing and lower machine downtime The indexable concept significantly shortens service times: worn edges are replaced rather than the entire tool, supporting predictable maintenance cycles and cost control. The cutter is designed for APXT 1003 inserts and secures inserts with an M2.5x5.5 Torx screw (T8 key), ensuring a robust clamp with rapid extraction and fitting. For production environments where tool change frequency affects throughput, this setup delivers a measurable improvement in availability and labour efficiency. Productivity advantages in common milling tasks Equipped with three cutting edges and a 40 mm effective cutting length, the tool offers an advantageous balance between engagement depth and feed efficiency. The three-edge layout reduces cutting forces per edge and favours consistent chip formation, which is especially beneficial for repetitive face milling and slotting operations. The combination of cutter geometry and insert technology can contribute to shorter cycle times and a clearer cost-per-part calculation in mixed-production shops. Integration into workshop logistics and procurement The cutter’s compact package and compatibility with widely used APXT inserts make it a practical addition to a standard tooling portfolio. Its modest weight and defined dimensions simplify tool inventory management and the procurement of spare screws and inserts. For customers requiring further specification data or application advice, technical support is available to match the tool to the intended insert grades and machine spindle interfaces, facilitating a smooth introduction into existing CNC workflows. For assistance with application matching, ordering or to discuss spindle compatibility, contact Metav Werkzeuge for expert guidance on Teknik Makina tooling and supply solutions. Technical data Article number: S169TM Manufacturer: Teknik Makina Suitable for: APXT 1003 indexable inserts Torx screw: M2.5x5.5 Torx key: T8 Core dimensions Shank diameter: 25 mm Cutting length: 40 mm Overall length: 120 mm Cutting edges: 3 Diameter: 25 mm Weight: 0.452 kg Cutting angle: 90° Compatibility & features Compatible insert manufacturer: Korloy For APXT 1003 indexable inserts Secured with Torx screw M2.5x5.5 Designed for face and slot milling applications FAQ What inserts fit this milling cutter? The milling cutter is designed for APXT 1003 indexable inserts and is listed as compatible with inserts from Korloy. Which screw and key are required to secure the inserts? Inserts are secured with an M2.5x5.5 Torx screw; the recommended key size is T8. Is the cutter suitable for shoulder milling on standard CNC machines? Yes, the cutter’s 25 mm shank and 90° cutting geometry make it suitable for shoulder and face milling where APXT 1003 inserts are applied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Cutter For APXT 1003 Indexable Inserts, 3 Flute, 70mm Cutting Length, 90° Cutting Angle - Teknik Makina
Take advantage of the combination of a compact Ø25 mm shank, generous 70 mm cutting length and compatibility with APXT 1003 indexable inserts for stable, repeatable milling operations; order directly via Metav Werkzeuge or contact our consultants for tailored advice. Shank milling cutter S194TM – indexable insert cutter, Ø25 mm, 3 cutting edges (Teknik Makina) The robust Shank milling cutter S194TM is designed for use with APXT 1003 indexable inserts, offering a straightforward solution for production environments that require quick insert changes and consistent cutting performance. Ø25 mm shank for standard toolholders 70 mm effective cutting length Compatible with APXT 1003 Korloy inserts Consistent performance through indexed cutting The cutter is built to pair with APXT 1003 indexable inserts, delivering predictable results across repeat passes. Indexable inserts allow the cutting edge to be restored by rotating or replacing the small insert rather than the entire tool, which reduces downtime and tooling cost. The tool’s 90° cutting angle gives a square, controlled cut suitable for many milling tasks where positional accuracy and clean shoulder faces matter. With three cutting edges, the design balances material removal rate and stability, maintaining cutting quality while spreading wear across multiple edges. Practical design for quick setup and secure clamping Engineered for straightforward handling, the tool features a Ø25 mm shank that fits common collet and chucking systems, and an overall length of 250 mm that suits a range of set-ups. Insert clamping uses a M2.5×5.5 Torx screw, tightened with a T8 key, making insert changes rapid and tool reconditioning simple. The modest mass of 0.953 kg contributes to manageable handling during changeovers while helping maintain rigidity in the holder. These design choices reduce machine downtime and simplify shift-to-shift tool handling. Fit for production workflows using APXT 1003 inserts Compatibility with Korloy-manufactured APXT 1003 inserts ensures broad availability of inserts and options for different grades and geometries. The cutter’s three-edge configuration supports uninterrupted productivity: worn edges can be rotated to a fresh cutting face, extending the life of each insert. For buyers consolidating suppliers, this tool integrates easily into workflows that already use indexable systems, helping to streamline inventory and lower per-cutting-cost over time. Serviceability, sourcing and workshop advantages Maintenance focuses on routine insert inspection and replacing the Torx screw when necessary, a simple task that keeps the tool in reliable service. The modular nature of indexable systems means lower capital tied up in complete tools and faster turnaround for repairs. For dependable supply and advice, Metav Werkzeuge’s Emmerich hub acts as a quality filter for the European market, supporting reliable procurement and consistent stock availability for production planning. For a direct supply from Metav Werkzeuge and specialist guidance on integrating the Teknik Makina S194TM shank milling cutter into existing tooling systems, contact Metav Werkzeuge in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: S194TM Brand: Teknik Makina Product name: Shank milling cutter for APXT 1003 indexable inserts SKU: S194TM Data Shank diameter: 25 mm Cutting length: 70 mm Number of cutting edges: 3 Overall length: 250 mm Weight: 0.953 kg Cutting angle: 90° Special features Compatible insert type: APXT 1003 Compatible insert manufacturer: Korloy Torx screw: M2.5×5.5 Torx key size: T8 FAQ Which inserts fit this cutter? The cutter is designed for APXT 1003 indexable inserts; Korloy APXT 1003 inserts are specified as compatible with the S194TM. How many cutting edges does the tool offer and what is the benefit? The S194TM is equipped for three cutting edges, which helps distribute wear and allows multiple indexing positions to extend insert life and reduce tooling cost. What is the shank diameter and will it fit common toolholders? The shank diameter is 25 mm, a common size that fits many standard collet and chuck systems for milling spindles and toolholders. Which screw and key are required for insert clamping? Insert clamping uses a M2.5×5.5 Torx screw, tightened with a T8 key, allowing quick and secure insert changes. Is the cutter suitable for high-volume production use? The modular indexable design of the S194TM supports efficient insert changes and predictable tool life, making it suitable for production environments that prioritise uptime and straightforward maintenance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Cutter For BDMT 11T3 Indexable Inserts With Internal Coolant, 150mm Length - Teknik Makina
Combining a 25 mm shank, internal coolant and compatibility with BDMT 11T3 Kyocera inserts, this shank milling cutter offers stable clamping and efficient chip control for continuous production. Order the tool directly via Metav Werkzeuge or contact our consultants for application-specific advice. Shank milling cutter S569-1TM – 25 mm shank, internal coolant (Teknik Makina) A shank milling cutter designed for indexable-insert milling with BDMT 11T3 inserts, offering reliable performance for versatile machining tasks in production and workshop environments. 25 mm shank diameter for stable clamping Internal coolant for improved chip evacuation Compatible with BDMT 11T3 Kyocera inserts 150 mm overall length, 50 mm cutting length Stable clamping for consistent machining results The tool’s 25 mm shank and compact geometry provide a high level of rigidity that reduces vibration and runout, resulting in improved surface finish and longer insert life. With three cutting edges, the cutter balances material removal rate and smooth cutting behaviour, which supports repeatable cycle times in medium-duty milling operations. The combination of shank diameter and balanced design helps to maintain tool stability when used in standard collet chucks or solid holders, contributing to predictable machining results and fewer set-up adjustments. Coolant-through design and insert system for shorter cycle times The internal coolant channel directs cutting fluid precisely to the cutting zone, promoting better chip control and heat dissipation. This reduces built-up edge and extends the effective life of the insert while improving process reliability. The cutter accepts BDMT 11T3 indexable inserts and is compatible with Kyocera-type inserts, enabling quick insert replacement and reduced downtime. Fast clamping and the standard Torx specification for the screw—T8 key and M2.5x5.5 screw—allow safe and repeatable insert changes with commonly available assembly tools. Designed for dependable workshop and production use With an overall length of 150 mm and a cutting length of 50 mm, the shank milling cutter provides the reach needed for a range of face, shoulder and light slotting tasks while keeping deflection minimal. The tool’s mass (approx. 0.563 kg) and geometry are optimised for stable operation across consecutive cycles. Manufactured by Teknik Makina and distributed via Metav Werkzeuge’s European quality filter, the cutter is intended for buyers seeking a straightforward, indexable solution that combines efficient chip evacuation, reliable insert retention and the convenience of standard replacement parts. Request a tailored application consultation for Teknik Makina tools with internal coolant from Metav Werkzeuge—call +49 2822 7131930 or email info@metav-werkzeuge.com to confirm suitability and availability Technical data SKU: S569-1TM UID: S569-1TM Product type: Shank milling cutter Manufacturer: Teknik Makina Label: 25 mm shank milling cutter BDMT 11T3 L150mm with internal coolant Weight: 0.563 kg Dimensions / Performance Shank diameter: 25 mm Overall length: 150 mm Cutting length (shank): 50 mm Cutting edges: 3 Diameter: 25 mm Design and features Internal coolant: yes Compatible inserts: BDMT 11T3 Suitable insert manufacturer: Kyocera Torx key: T8 Torx screw: M2.5x5.5 FAQ What insert type does this cutter accept? The shank milling cutter S569-1TM accepts BDMT 11T3 indexable inserts and is specified for compatible Kyocera insert systems. Is the tool coolant-through or external-only? This model features internal coolant, which delivers cutting fluid directly to the cutting zone for improved chip control and reduced thermal loading. How many cutting edges does the tool have? The cutter is equipped with three cutting edges, balancing material removal and smooth cutting action for many milling tasks. What are the key dimensions for clamping and reach? Key dimensions are a 25 mm shank diameter, 150 mm overall length and 50 mm cutting length, providing stable clamping and sufficient reach for common operations. Which screw and key are required for insert changes? Insert retention uses an M2.5x5.5 screw tightened with a T8 Torx key for secure and repeatable insert replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Cutter For BOMT 1304 Indexable Inserts 3 Flute, 40mm Cutting Length - Teknik Makina
Take advantage of a rigid Ø25 mm shank and compatibility with BOMT 1304 indexable inserts to secure repeatable milling performance; the compact overall length and three cutting edges combine stability with efficient material removal. Order the cutter directly via Metav Werkzeuge or consult the specialists for application guidance. Shank milling cutter S852TM — indexable insert milling body, Ø25 mm shank, 3 cutting edges (Teknik Makina) A Shank milling cutter S852TM built as an insert milling body for use with BOMT 1304 indexable inserts, suitable for standard insert milling and face operations where rigidity and quick insert changes matter Ø25 mm shank for stable clamping Compatible with BOMT 1304 indexable inserts Three cutting edges for smooth material removal Torx clamping screw M3.5×8.5, key T10 Stability and process reliability through a stout shank design The solid Ø25 mm shank delivers the axial and torsional stiffness required for predictable machining, reducing chatter and giving a stable platform for indexable cutting. Combined with a 120 mm overall length, the design balances reach and rigidity: adequate projection for common set-ups while keeping deflection low. The S852TM’s configuration with three cutting edges provides an even load distribution per revolution, which often translates into a more consistent surface finish and longer insert life compared with less evenly loaded designs. By specifying a shank of this diameter, the milling body is optimised for secure clamping in standard toolholders, enabling repeatable set-ups across batches and reducing rework. Fast insert clamping and maintenance for high uptime Designed for efficient insert replacement, the tool uses a Torx screw M3.5×8.5 with a T10 key, allowing quick and secure locking of BOMT 1304 inserts. This standardised clamping method keeps changeover times short and helps maintain consistent seat position and cutting geometry after each change. The 40 mm cutting length gives sufficient engagement for many finishing and light-roughing passes while limiting the exposed insert overhang, which assists in tool life management. A straightforward mounting routine reduces downtime and supports predictable production planning in machining cells. Practical advantages for workshop and production environments As an insert holder engineered for indexable plates, the milling body eliminates the need for resharpening by allowing inserts to be indexed or replaced, improving cost efficiency over time. The relatively low mass—balanced for handling and toolchanging—combined with the standardised interface for BOMT 1304 inserts promotes compatibility with established insert inventories, including those from recognised makers such as Ingersoll. The result is a pragmatic mix of serviceability and process continuity: fewer surprises on the shop floor and a straightforward route to maintain cutting performance. Designed for integration into existing tool systems The cutter’s geometry and mounting hardware follow common industry conventions, which supports integration into existing tool sets and fixtures without elaborate modification. The use of widely available indexable plates simplifies procurement and inventory, while the robust shank platform helps preserve spindle and holder life by reducing uneven forces during cutting. For operations seeking a dependable insert milling body that pairs repeatable clamping, straightforward maintenance and a compact working envelope, this tool represents a sensible choice from a performance and logistical perspective. For advice on implementing Teknik Makina insert cutters in production or to request delivery options from Metav Werkzeuge, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored guidance and lead-time information Technical data Article number: S852TM Manufacturer: Teknik Makina Designation: Shank milling cutter for BOMT 1304 indexable inserts Compatible inserts: BOMT 1304 Compatible insert manufacturers: Ingersoll Core specifications Shank diameter: 25 mm Cutting length: 40 mm Overall length: 120 mm Number of cutting edges: 3 Weight: 0.451 kg Clamping screw: M3.5×8.5 Special features Torx key size: T10 For BOMT 1304 indexable inserts Insert clamping via Torx screw Designed as an insert milling body for standard toolholders FAQ What insert type does the cutter accept? The cutter accepts BOMT 1304 indexable inserts; the milling body is configured specifically for this plate form. Which screw and key are required for insert clamping? Insert clamping uses a Torx screw M3.5×8.5 and is tightened with a T10 key. Is the tool compatible with inserts from other manufacturers? Yes, the holder is compatible with BOMT 1304 inserts from recognised suppliers such as Ingersoll and other vendors offering the same plate format. What are the main dimensions to consider for toolholder selection? Key dimensions are the Ø25 mm shank, 40 mm cutting length and 120 mm overall length, which determine holder fit and working projection. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Cutter For BOMT 1304 Indexable Inserts With Internal Coolant, 150mm L - Teknik Makina
Take advantage of a compact, stable tooling solution that pairs high clamping rigidity with targeted coolant delivery for longer insert life and reliable chip control — ideal for productive indexable milling operations. Order directly via Metav Werkzeuge or contact our consultants for application-specific advice. Teknik Cutting Tools 25 mm Indexable Insert Milling Cutter for BOMT 1304 — 150 mm Total Length, Internal Coolant A 25 mm shank milling cutter for BOMT 1304 indexable inserts, designed for secure clamping and coolant-fed machining in production and workshop environments. Internal coolant for improved chip evacuation Compatible with BOMT 1304 indexable inserts 25 mm shank for secure clamping Three cutting edges for consistent material removal Higher metal removal rates with predictable performance This shank milling cutter is engineered for productive indexable milling with the BOMT 1304 insert family. The combination of a 25 mm shank and a three-edge geometry delivers a balance between rigidity and cutting capacity, enabling higher material removal rates with reduced vibration. The result is a more predictable cycle time and a consistent surface finish on workpieces, which supports throughput-focused production environments. Stable clamping and optimised overhang for accurate results A solid 25 mm shank and a 150 mm total length create a compact tool envelope that limits deflection during aggressive cutting. The 40 mm cutting length provides sufficient engagement while keeping overhang low, so the assembly maintains concentricity and repeatability. Fewer setup corrections are required, reducing rework and increasing first-pass yield for routine milling tasks. Internal coolant that extends insert life and improves chip control The built-in internal coolant channels coolant directly to the cutting zone, flushing chips away from the insert pocket and reducing built-up edge. This targeted supply reduces thermal load on the insert and lowers the risk of premature wear, which prolongs service intervals and reduces tooling costs per component. Maintenance is straightforward, with Torx fastening using the Torx T10 key and M3.5x8.5 screws for secure insert attachment. Suitable for workshop and production workflows Designed to integrate with common indexable systems, the cutter accepts BOMT 1304 inserts and is compatible with inserts from Ingersoll, enabling flexibility across tool holders and stock insert inventories. The compact, coolant-fed design supports both single-machine and batch production scenarios, simplifying tool planning and reducing downtime during insert changes. For detailed application guidance or to specify the Teknik Cutting Tools 25 mm indexable milling cutter with internal coolant for a specific machining task, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and rapid supply. Technical data SKU: S853-1TM Product type: Indexable insert milling cutter Name: 25 mm shank milling cutter for BOMT 1304 Manufacturer: Teknik Makina Facts Diameter: 25 mm Total length: 150 mm Shank diameter: 25 mm Cutting length: 40 mm Number of cutting edges: 3 Weight: 0.556 kg Special features Internal coolant For BOMT 1304 indexable inserts Compatible with Ingersoll insert manufacturer Torx T10 key required Torx screw M3,5x8,5 FAQ Which inserts fit this cutter? The cutter accepts BOMT 1304 indexable inserts; it is also compatible with inserts from Ingersoll for flexible tooling options. Is the coolant internal or external? This indexable milling cutter features internal coolant that delivers fluid directly to the cutting zone to aid chip evacuation and extend insert life. What is the shank size and overhang? The tool has a 25 mm shank and a 150 mm total length with a 40 mm cutting length, offering a compact overhang for reduced deflection. How are inserts secured? Inserts are fixed with Torx fastenings; the cutter uses a Torx T10 key and M3.5x8.5 screws for reliable clamping. Can this tool be used in general production environments? Yes, the robust shank, coolant-fed design and compatibility with standard BOMT 1304 inserts make it suitable for both workshop and production applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Cutter For LNHU 0904 Indexable Inserts, 3 Flutes 150mm Overall Length, 40mm Cutting Shank - Teknik Makina
The combination of a 25 mm shank and compatibility with LNHU 0904 indexable inserts delivers stable, productive milling with quick insert changes; the M3x7 Torx screw and T8 key ensure secure clamping and straightforward maintenance. Order the shaft cutter directly via Metav Werkzeuge or ask our consultants if needed. Schaftfräser – shank milling cutter with 25 mm shank for LNHU 0904 indexable inserts by Teknik Makina The Schaftfräser is a shank milling cutter designed for industrial milling with LNHU 0904 indexable inserts, combining rigid support with efficient chip removal for medium to heavy machining operations. Compatible with Walter LNHU 0904 inserts 25 mm shank diameter for high rigidity 40 mm effective cutting length Torx screw M3x7 and T8 key for secure clamping Stable machining through a rigid shank and focused cutting geometry The cutter is engineered to deliver consistent chip evacuation and reduced vibration by pairing a solid 25 mm shank with a 40 mm cutting length and a 150 mm overall length. These dimensions provide a balance between reach and stiffness that supports repeatable machining cycles on milling machines and machining centres. With three cutting edges, the tool achieves effective material removal while maintaining surface finish standards required in production environments. Where stability is essential, the combination of shank diameter and cutting geometry reduces deflection, which in turn helps to increase tool life and process reliability. Fast insert changes and secure clamping for uninterrupted production Designed for indexable inserts LNHU 0904 and compatible with Walter inserts, the cutter uses an M3x7 Torx screw and a T8 Torx key to secure the insert reliably. This fastening system enables rapid insert replacement, minimising downtime in batch production. The secure clamping mechanism also contributes to safe operation under heavy loads. For workshops integrating modular tooling, the straightforward handling reduces changeover time and supports lean manufacturing principles, while the unit weight of approximately 0.599 kg reflects a robust construction without excessive mass. Application-focused design that supports workshop and industrial needs Intended for a range of milling tasks where indexable inserts are preferred, this shank milling cutter suits applications from roughing to semi-finishing, depending on insert geometry and cutting data. The tool’s compatibility with established insert types makes it a flexible addition to an existing tooling setup. Selecting the correct insert grade and cutting parameters will determine suitability for specific materials; the cutter itself provides a stable platform to exploit modern carbide insert technologies. As part of a broader supply strategy, procurement via Metav Werkzeuge ensures consistent delivery and access to technical advice, supporting uninterrupted shop-floor operation. For reliable milling performance with Walter-compatible LNHU 0904 inserts, contact Metav Werkzeuge in Emmerich for expert advice and prompt supply via info@metav-werkzeuge.com or telephone +49 2822 7131930 Technical Data SKU: S328TM Manufacturer: Teknik Makina Compatible inserts: LNHU 0904 Core technical data Shank diameter: 25 mm Cutting length: 40 mm Overall length: 150 mm Diameter: 25 mm Number of cutting edges: 3 Weight: 0.599 kg Special features Torx screw M3x7 Torx key T8 Compatible with Walter LNHU 0904 inserts Designed for indexable insert milling FAQ What inserts fit this shank milling cutter? The cutter accepts LNHU 0904 indexable inserts; it is listed as compatible with Walter inserts and designed to secure them with the supplied M3x7 Torx screw. What are the key dimensions to check for machine compatibility? Important measures are the 25 mm shank diameter, 40 mm cutting length and 150 mm overall length; check the machine tool holder and spindle clearance against these values. How many cutting edges does the tool have and what does that mean for performance? The tool features three cutting edges, which provide a balance between material removal rate and surface finish, suitable for medium to heavy operations depending on insert choice. Which tool is required to change the insert? Insert changes are performed using a T8 Torx key to tighten or release the M3x7 Torx screw, ensuring secure clamping during machining. Is this cutter suitable for high-production environments? The combination of a 25 mm shank, robust clamping and compatibility with standard LNHU 0904 inserts makes the cutter appropriate for repetitive production tasks where fast insert changes and stability are priorities. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Cutter For LNMT 0804 Indexable Inserts 4 Cutting Edges 40mm Cutting Length - Teknik Makina
Benefit from a stable 25 mm shank and four cutting edges for predictable material removal; the 110 mm overall length supports secure mounting and consistent runout — order the tool directly via Metav Werkzeuge or consult our specialists for process integration. S300TM shank milling cutter – 25 mm shank, 4 cutting edges (Teknik Cutting Tools) A precision shank milling cutter S300TM for LNMT 0804 indexable inserts, designed for secure mounting in standard 25 mm toolholders and for demanding production and workshop milling tasks 25 mm shank diameter for stable clamping Designed for LNMT 0804 indexable inserts Four cutting edges for efficient material removal Torx M2.5x7 fastening with T8 key compatibility Predictable machining through robust geometry and design The tool body offers a 25 mm shank and an 110 mm overall length, which together reduce deflection and support repeatable toolpaths in serial production. The combination of a defined shank diameter and a modest weight of 0.477 kg contributes to rotational stability, reducing vibration and improving surface finish. Where runout tolerance matters, the engineered shank and clamping interface provide a solid mechanical basis that helps maintain cutting geometry over longer cycles. Secure clamping and fast insert changes for efficient set-up Fast, reliable assembly is facilitated by the Torx fastening arrangement: a Torx M2.5x7 screw and a T8 key are specified for secure seat retention of the LNMT 0804 inserts. The straightforward fastening system enables quick insert swaps and consistent seat torque, cutting machine downtime and simplifying tool management. The precisely matched 25 mm mount ensures the cutter can be integrated into common toolholders without adaptors, supporting a faster changeover routine on the shop floor. Compatible inserts and productive cutting behaviour Configured specifically for LNMT 0804 indexable inserts and compatible with ISCAR insert styles, the cutter uses four cutting edges to balance material removal with surface quality. This arrangement delivers steady chip evacuation and allows moderate radial engagement per pass while keeping cutting forces predictable. For manufacturing environments that require dependable repeatability, the tool provides a clear technical basis for process planning and predictable cycle times. Contact Metav Werkzeuge today for tailored machining advice on the Teknik Cutting Tools S300TM shank milling cutter and receive direct support from our specialists at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: S300TM Manufacturer: Teknik Makina Compatible inserts: LNMT 0804 Compatible insert manufacturer: ISCAR Core dimensions Shank diameter: 25 mm Cutting length: 40 mm Overall length: 110 mm Number of cutting edges: 4 Weight: 0.477 kg Mount diameter: 25 mm Special features Torx screw: M2.5x7 Torx key size: T8 Designed for LNMT 0804 indexable inserts FAQ Is the cutter compatible with ISCAR inserts? Yes. The S300TM shank milling cutter is specified for LNMT 0804 indexable inserts and is compatible with ISCAR insert styles. What shank diameter is required for mounting? The tool requires a 25 mm shank holder; the S300TM’s mount diameter is 25 mm for direct clamping. How many cutting edges does the cutter have and what is the cutting length? The cutter features four cutting edges and a cutting length of 40 mm, offering balanced material removal and chip control. Which fastening hardware is specified for insert retention? Insert retention uses a Torx M2.5x7 screw; a T8 key is the corresponding driver size for secure fastening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Cutter For LNMX 0603 Indexable Inserts With Internal Coolant, 4 Flutes - Teknik Makina
Benefit from the combination of internal coolant and a rigid 25 mm shank together with LNMX 0603 indexable insert compatibility for steady production performance; order the cutter directly via Metav Werkzeuge or consult their technical team for application advice. Shank Milling Cutter S286-1TM – for LNMX 0603 indexable inserts, 25 mm shank, internal coolant (Teknik Makina) The Shank Milling Cutter S286-1TM is a shank-mounted milling body engineered for machining operations that require reliable insert clamping and enhanced coolant delivery, suitable for workshops and production environments using LNMX 0603 indexable inserts. Internal coolant through shank Compatible with LNMX 0603 (Korloy) inserts 25 mm shank diameter for improved rigidity Torx M3x7 screw with T8 Torx key Rigidity and repeatability for consistent metal removal A solid 25 mm shank and precise geometry deliver higher rigidity, reducing chatter and improving surface finish during slotting or shoulder milling. The tool's balanced design with 4 cutting edges distributes cutting forces evenly, which helps maintain repeatable dimensions over a run. For production settings where cycle-time consistency and part tolerance matter, this configuration supports steady machining and fewer reworks, translating into measurable process reliability. Efficient coolant flow to extend insert life Integrated internal coolant channels channel cutting fluid directly to the cutting zone, improving chip evacuation and maintaining thermal stability at the insert edge. With coolant delivered to the insert pocket, wear rates are reduced and insert life is extended, lowering tooling cost per component in the long run. This feature is particularly beneficial when machining alloys or interrupted cuts where localised heat can accelerate flank wear. Compatibility and secure clamping for quick maintenance Designed for LNMX 0603 indexable inserts, the cutter is specified to accept inserts from Korloy and similar manufacturers, enabling easy replacement and flexibility in coating or geometry choices. Secure clamping is achieved with an M3x7 Torx screw and a T8 Torx key, simplifying maintenance while ensuring firm retention during high-feed operations. The combination of standard insert format and robust retention reduces downtime during tool changes. Practical design for workshop integration Weighing approximately 0.552 kg with a total length of 140 mm and a cutting length of 60 mm, the cutter integrates into existing toolholders and fixtures with minimal adjustment. The compact shank and length ratio aid in achieving a balance between accessibility and stiffness, making the tool suitable for batch production and job-shop environments. If clarification on machine compatibility or recommended cutting data is required, Metav’s specialists can provide application-focused recommendations. For tailored application advice or to place an order for Teknik Makina’s S286-1TM shank milling cutter, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss delivery and technical parameters Technical data Article number: S286-1TM Label: 25 mm shank milling cutter LNMX 0603 L140 mm with internal coolant Manufacturer: Teknik Makina ECLASS: 21180806 Facts Total length: 140 mm Shank diameter: 25 mm Cutting length: 60 mm Weight: 0.552 kg Number of cutting edges: 4 Special features Internal coolant Compatible with LNMX 0603 indexable inserts (Korloy) Torx screw M3x7, Torx key T8 Shank-mounted milling cutter type FAQ Is this cutter compatible with Korloy LNMX 0603 inserts? Yes. The S286-1TM is specified for LNMX 0603 indexable inserts and is compatible with Korloy insert variants, allowing straightforward insert replacement. Does the tool provide internal coolant delivery? Yes. Internal coolant channels supply lubricant directly to the insert pocket, supporting improved chip evacuation and reduced thermal load. What are the shank diameter and overall length of the cutter? The cutter has a 25 mm shank diameter and a total length of 140 mm, with a cutting length of 60 mm. How many cutting edges does the cutter have and what is the benefit? The S286-1TM features 4 cutting edges, which balance cutting forces and contribute to stable machining and consistent surface quality. Which screw and key are required for insert retention? Insert retention uses an M3x7 Torx screw operated with a T8 Torx key for secure clamping and easy maintenance. Teknik Makina: Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Cutter for LNMX 0603 Indexable Inserts With Internal Coolant, 4 Flutes - Teknik Makina
Take advantage of a robust combination of 25 mm shank rigidity, integrated internal coolant and compatibility with LNMX 0603 inserts to keep machining reliable and efficient; order directly via Metav Werkzeuge or contact our consultants for application advice. Indexable Insert Milling Cutter – 25 mm shank, internal coolant (Teknik Makina) The Indexable Insert Milling Cutter is designed for heavy-duty milling with LNMX 0603 indexable inserts and internal coolant for controlled chip evacuation. 25 mm shank for stable clamping Integrated internal coolant channel Compatible with LNMX 0603 Korloy inserts Four cutting edges for fast material removal Built for precision and rigidity to improve process stability A solid 25 mm shank and engineered holder geometry provide high rigidity during milling, reducing vibration and improving surface quality. The robust design keeps the cutter concentric under load, which benefits repeatability in series production. For users of indexable systems, this translates into fewer reworks and more consistent cycle times, while the reduced chatter helps protect both inserts and spindle bearings. Cooling integration that extends tool life and productivity The internal coolant channel supplies cutting fluid directly to the insert pocket, reducing heat at the cutting edge and improving chip control. This internal coolant feature lowers thermal stress on the inserts and the cutter body, which extends tool life and sustains cutting performance over longer runs. For workshops processing mixed batches, improved cooling means fewer unscheduled changeovers and steadier output. Indexable system for quick changeovers and predictable economics Designed for LNMX 0603 indexable inserts, compatible with Korloy inserts, the cutter enables rapid insert indexing and replacement without specialised regrinding. The four cutting edges increase metal removal rate while keeping individual insert cost manageable through multi-edge utilisation. This combination supports lean maintenance routines and predictable operating costs for production environments. Practical fit and fastening for reliable assembly With an overall length of 250 mm and a cutting length of 80 mm, the tool balances reach and stiffness for common milling setups. Fastening is secured with an M3x7 Torx screw and requires a T8 Torx key, ensuring positive clamp force and simple maintenance. The compact fastening design reduces the risk of improper seating and helps maintain consistent cutting geometry across insert changes. For Teknik Makina reliability and tailored advice on machining with LNMX 0603 inserts, contact Metav Werkzeuge in Emmerich for application support and rapid supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: S286-2TM Label: 25mm Schaftfräser LNMX 0603 L250mm mit Innenkühlung Manufacturer: Teknik Makina Product type: Schaftfräser Description: for LNMX 0603 Indexable Inserts ECLASS: 21180806 Facts Diameter: 25 mm Overall length: 250 mm Shank diameter: 25 mm Cutting length: 80 mm Number of cutting edges: 4 Weight: 0.67 kg Torx screw: M3x7 Torx key: T8 Special features Internal coolant Compatible with LNMX 0603 indexable inserts Compatible insert manufacturer: Korloy Indexable insert system SKU / UID: S286-2TM FAQ Is this cutter compatible with LNMX 0603 inserts only? The cutter is designed for LNMX 0603 indexable inserts and is compatible with Korloy LNMX 0603 inserts as specified for the S286-2TM tool. How does the internal coolant benefit cutting performance? Direct coolant to the insert pocket reduces cutting temperature and improves chip evacuation, which increases insert life and stabilises cutting forces for the S286-2TM indexable insert milling cutter. What clamping accessories are required for mounting? Standard toolholders with a 25 mm shank bore and a matching clamping system are suitable; the cutter is secured by an M3x7 Torx screw requiring a T8 Torx key. Can the tool be used for high-feed roughing applications? With four cutting edges and a rigid 25 mm shank, the cutter is appropriate for medium to heavy material removal tasks where LNMX 0603 inserts and appropriate machining parameters are applied. What maintenance is recommended after insert changes? Ensure the insert pocket and coolant channels are clean, verify the M3x7 Torx screw is torqued correctly with a T8 key, and inspect seat surfaces for wear before reassembly of the S286-2TM cutter. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Cutter for LOGU 0303 Indexable Inserts 4-Flute 60mm Cutting Length L200mm - Teknik Makina
The combination of a 25 mm shank and four cutting edges delivers high rigidity and efficient material removal for stable production. Order the tool directly via Metav Werkzeuge or consult their application specialists for installation and tooling advice. Shaft Cutter S683TM – 25 mm shank, 200 mm overall length (for LOGU 0303) by Teknik Makina Shaft Cutter S683TM is a robust milling tool designed for use with LOGU 0303 indexable inserts, providing long reach and secure clamping for workshop and production milling tasks. 25 mm shank diameter for secure clamping 200 mm overall length for extended reach Four cutting edges for efficient material removal Compatible with LOGU 0303 inserts (Kyocera) Stable clamping and repeatable results for series work Built around a 25 mm shank, this milling tool offers enhanced rigidity that minimises chatter and improves surface finish when machining repetitive features. The solid shank combined with a balanced design reduces deflection during plunging and peripheral cuts, which in turn supports consistent tolerances across batches. For production environments where repeatability is essential, the combination of a long reach and a firm connection to the holder contributes directly to lower scrap rates and fewer reworks. Higher material removal with reduced tool changes With four cutting edges and a 60 mm cutting length, the cutter accelerates metal removal while maintaining stability. The indexable system for LOGU 0303 inserts enables rapid insert replacement without full regrinding of the tool body, cutting downtime and simplifying maintenance routines. Insert retention is secured by an M3x7 screw tightened with a Torx T8 key, ensuring consistent seating torque and reliable cutting geometry after each change. This arrangement is particularly advantageous where throughput and machine uptime are priorities. Practical handling and balanced design for daily use Weighing 0.781 kg, the tool offers a useful balance between robustness and manoeuvrability in the spindle, aiding safe handling during tool changes and setup. The 200 mm overall length provides the reach required for deeper pockets and extended contours while keeping the centre of mass controlled to reduce vibration. For shops seeking a reliable standardised cutter to fit existing setups, this design supports easy integration into milling cells and manual machines alike. Inventory efficiency and compatibility with established insert systems Compatibility with LOGU 0303 indexable inserts produced by Kyocera reduces the need to stock bespoke tool bodies: spare inserts can be kept on the shelf and fitted quickly when required. The standardised insert format means common insert grades and geometries can be used to tune cutting performance without altering the shank tool. The tool is supplied under SKU S683TM, making procurement and stocking straightforward for purchasing departments and maintenance teams. Contact Metav Werkzeuge in Emmerich for tailored application recommendations or to secure the S683TM from Teknik Cutting Tools; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: S683TM Manufacturer: Teknik Makina Product type: Shaft cutter Diameter / shank: 25 mm Overall length: 200 mm Cutting length: 60 mm Weight: 0.781 kg Number of cutting edges: 4 Compatible with LOGU 0303 indexable inserts Suitable insert manufacturer: Kyocera Torx key: T8 Torx screw: M3x7 eClass: 21180806 FAQ What insert type does this cutter use? The cutter accepts LOGU 0303 indexable inserts, a standard format that enables quick replacement and flexible grade selection. Is the S683TM compatible with Kyocera inserts? Yes, the S683TM is compatible with LOGU 0303 inserts from Kyocera and is designed to seat those inserts reliably. What are the key dimensions to check for machine compatibility? Verify the 25 mm shank diameter, 200 mm overall length and the 60 mm cutting length to ensure the tool fits the machine spindle and provides the required reach. How is insert retention handled on this tool? Insert retention is via an M3x7 screw using a Torx T8 key, providing consistent torque and secure seating for the indexable insert. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Cutter For RDMT 1003 Indexable Inserts 2 Flute, 60mm Cutting Length - Teknik Makina
Take advantage of the 25 mm shank and 60 mm cutting length for stable, repeatable milling with RDMT exchangeable inserts; the compact, two-edged design delivers efficient material removal and simplified insert changes. Order directly via Metav Werkzeuge or request tailored advice from our technical consultants. Shaft milling cutter for RDMT 1003 indexable inserts — 25 mm shank, 2 cutting edges (Teknik Makina) Shaft milling cutter for RDMT 1003 indexable inserts designed for secure insert clamping and efficient peripheral and face milling in CNC and manual milling applications. 25 mm shank for rigid mounting Compatible with RDMT 1003 inserts 60 mm effective cutting length Two cutting edges for balanced milling Faster set-up and secure clamping for consistent production The holder’s M3.5 locking screw and M3.5x8.5 Torx screw simplify insert fastening, reducing set-up time and minimising the risk of slips during machining. Quick, tool-assisted insert changes using the supplied T15 Torx key mean shorter machine downtime and more predictable cycle times. For workshops where changeover speed and repeatability matter, the combination of a defined clamping method and a compact tool body supports efficient process control and lowers scrap rates. Stable cutting performance that improves surface quality A 25 mm shank provides the rigidity required for accurate engagement of the insert edges, while the 60 mm cutting length allows a useful depth of cut for many milling tasks. The two cutting edges ensure a balanced load, which reduces vibration and contributes to a steadier surface finish. Using standard RDMT 1003 indexable inserts keeps running costs down because individual cutting edges are replaced rather than the whole tool, offering a practical balance between productivity and economy. Practical design for workshop integration and maintenance The tool’s compact overall length (150 mm) and modest mass (0.544 kg) make it easy to handle at the bench and straightforward to mount in common toolholders. Clear mechanical specifications support predictable toolpaths and feed rates in CAM programmes. Routine maintenance is limited to insert replacement and checking the locking screw torque; no special fixtures are required. For further machining parameters or CAM guidance, Metav Werkzeuge’s specialists can provide application-oriented recommendations and data sheets. For reliable, high-repeatability milling choose Teknik Makina’s shaft milling cutter and contact Metav Werkzeuge for personalised advice and fast supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: R202TM Name: Shaft milling cutter for RDMT 1003 indexable inserts Manufacturer: Teknik Makina Facts Shank diameter: 25 mm Effective cutting length: 60 mm Number of cutting edges: 2 Overall length: 150 mm Weight: 0.544 kg Special features Compatible inserts: RDMT 1003 Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 FAQ What inserts does this cutter accept? The shaft milling cutter accepts RDMT 1003 indexable inserts, allowing economical replacement of cutting edges without changing the entire tool body. How is the insert secured in the cutter? Insert clamping is achieved with a M3.5 locking screw and an M3.5x8.5 Torx screw; assembly and disassembly are performed with a T15 Torx key for secure, repeatable seating. Is the tool suitable for heavy-duty milling? The tool’s 25 mm shank offers good rigidity for many milling tasks; however, machining parameters should be selected according to the workpiece material and machine capability to ensure optimal performance. What are the key dimensions to consider for toolholder compatibility? Relevant dimensions include the 25 mm shank diameter, 60 mm cutting length, and 150 mm overall length—these values help determine suitable collet or holder selection. Which SKU should be referenced when ordering or requesting documentation? Reference SKU R202TM when ordering, requesting CAM data or spare parts information for this Teknik Makina shaft milling cutter. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Cutter For Sandvik R390-1704 Indexable Inserts 90° 2 Flutes 45mm Cutting Length - Teknik Makina
Taking advantage of robust compatibility and straightforward insert replacement, benefit from the combination of precise 90° cutting geometry, a 25 mm shank and fast clamping with a Torx M3.5 screw for steady production. Order the tool directly via Metav Werkzeuge or consult the technical team for application advice. S510TM Shaft milling cutter — indexable milling cutter for R390-1704 inserts, 90° cutting angle (Teknik Makina) The S510TM shaft milling cutter is a compact indexable milling cutter designed for shoulder milling and other perpendicular cutting operations using R390-1704 style inserts 25 mm shank diameter Compatible with Sandvik R390-1704 inserts 90° cutting angle for shoulder milling Quick insert change with Torx M3.5 screw Consistent machining performance for repeatable results The tool body delivers stable cutting conditions thanks to its 25 mm shank and overall length of 120 mm, which together reduce vibration and improve surface finish during perpendicular operations. With a 90° cutting angle and two cutting edges, this indexable milling solution is arranged for efficient shoulder cuts and face milling where dimensional repeatability matters. The relatively low mass (0.425 kg) helps achieve faster acceleration on the spindle without compromising rigidity, while the modular insert system allows exacting tolerances to be maintained across serial production runs. Faster tool changes to maximise machine uptime Designed around the widely used R390-1704 insert form, the cutter simplifies maintenance and stock handling; wearing only the insert is necessary rather than the whole body. Insert clamping is secured with a Torx M3.5x8.5 screw, operated with a T15 key, enabling quick and secure replacement under routine shop conditions. The 45 mm effective cutting length offers a practical balance between reach and tool stability, reducing the need for frequent tool swaps and supporting lean tooling strategies that cut cost-per-part through longer component life and minimal downtime. A practical choice for precision-focused workshops This indexable milling cutter suits CNC shops and production environments that value predictable tool behaviour and straightforward logistics. Compatibility with Sandvik style indexable inserts eases sourcing of cutting grades and geometries, while the two-flute design supports controlled chip evacuation and consistent feed rates. Acquisition through Metav Werkzeuge brings the benefit of a central European supply filter: broad product availability, experienced procurement, and a reliable shipping base from Emmerich — factors that maintain production continuity and lower procurement complexity. For tailored technical advice and fast delivery of the S510TM indexable milling cutter from Teknik Cutting Tools, contact Metav Werkzeuge in Emmerich for precise specification support and supply arrangements Technical data SKU: S510TM Product: Shaft milling cutter for R390-1704 indexable inserts Brand: Teknik Makina Title: Schaftfräser 90° für Schneidplatten Sandvik R390-1704 Facts Shank diameter: 25 mm Cutting length: 45 mm Overall length: 120 mm Number of cutting edges: 2 Cutting angle: 90° Weight: 0.425 kg Special features Compatible with Sandvik R390-1704 inserts Torx screw M3.5x8.5 for insert clamping Torx key size: T15 Designed for indexable insert replacement FAQ Which insert type fits this cutter? The S510TM is designed to accept R390-1704 indexable inserts and is compatible with Sandvik-style inserts of that form factor. What are the key dimensions of the tool? Shank diameter 25 mm, overall length 120 mm, and cutting length 45 mm are the primary dimensions. How many cutting edges does the cutter have and what geometry is used? The cutter has two cutting edges and a 90° cutting angle, optimised for shoulder and face milling tasks. How is the insert secured to the cutter body? Insertion is secured with a Torx M3.5x8.5 screw; the matching drive is a T15 key, enabling straightforward and repeatable clamping. Is the cutter intended for machine use in production environments? Yes, the S510TM is an indexable milling cutter intended for machining operations in suitable tool holders and driven spindles where indexable insert systems are employed. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Cutter for XEKT 1904 Indexable Inserts With Internal Coolant, 2 Flute - Teknik Makina
Take advantage of the combination of internal coolant, a 25 mm shank and a 61 mm cutting length for stable, high‑productivity milling; order the cutter directly via Metav Werkzeuge or ask the consulting team for technical guidance. Schaftfräser S385TM – 25 mm shank milling cutter with internal coolant by Teknik Makina The Schaftfräser S385TM is an indexable insert milling cutter engineered for productive peripheral and face milling using XEKT 1904 indexable inserts, suitable for industrial machining setups. 25 mm shank diameter Internal coolant supply Compatible with XEKT 1904 inserts 61 mm cutting length Greater rigidity for consistent surface quality and higher feeds Built around a 25 mm shank, the design prioritises rigidity to reduce vibration and deflection during aggressive cuts. The 140 mm overall length is balanced with a conservative mass of 0.415 kg to provide a stable tool centre without unnecessary overhang. The result is improved surface finish and repeatable component geometry; operators may therefore run higher feed rates with predictable outcomes, lowering cycle time while maintaining tolerances. Coolant-through design prolongs insert life and stabilises cutting The integrated internal coolant directs fluid close to the cutting zone, which assists chip control and heat dissipation at the insert edge. With a 61 mm cutting length, the coolant feed reduces thermal load and diminishes built‑up edge formation, extending the service interval of the XEKT 1904 inserts. For production environments, this translates into fewer unscheduled stops and a higher overall tool‑life economy. Proven compatibility and simple serviceability reduce inventory complexity Specified for XEKT 1904 indexable inserts and compatible with inserts from Korloy, the cutter uses standard fixing hardware — Torx T15 key and M4x8.5 screws — to enable quick, secure insert changes. The standardised interface means stocking fewer toolholders and inserts across similar tool families, shortening downtime during swaps and simplifying stock management for procurement teams. Robust engineering supports shop‑floor reliability With 2 cutting edges and a construction by Teknik Makina, the tool focuses on efficiency and predictable performance in repetitive milling tasks. The combination of indexable inserts and a resilient holder enables cost‑effective machining where insert replacement is faster and less wasteful than regrinding solid tools. The tool’s configuration is ideal for contract workshops and industrial shops aiming to optimise throughput while maintaining machining quality. Contact Metav Werkzeuge in Emmerich for tailored advice on the Teknik Makina S385TM and arrange supply from our European warehouse at +49 2822 7131930 or info@metav-werkzeuge.com Technical data SKU: S385TM Product: Schaftfräser Manufacturer: Teknik Makina Compatible inserts: XEKT 1904 (Korloy) Core dimensions Shank diameter: 25 mm Overall length: 140 mm Cutting length: 61 mm Cutting edges: 2 Weight: 0.415 kg Torx key: T15 Torx screw: M4x8.5 Special features Internal coolant supply Indexable insert system Designed for productive peripheral and face milling FAQ Is the cutter compatible with Korloy XEKT 1904 inserts? Yes. The Schaftfräser S385TM is designed for XEKT 1904 indexable inserts and is compatible with Korloy‑manufactured inserts of that designation. Does the tool provide coolant-through functionality? Yes. The S385TM features an internal coolant supply that delivers coolant to the cutting zone to improve chip evacuation and extend insert life. What fastening hardware is required for insert changes? Insert retention uses a Torx screw in size M4x8.5, tightened with a T15 Torx key for secure and rapid insert replacement. How does the 25 mm shank affect machining performance? A 25 mm shank increases holder stiffness and reduces deflection compared with thinner shanks, which helps maintain surface finish and allows higher feed rates when set up correctly. How many cutting edges does the tool have and what is the benefit? The tool is configured with 2 cutting edges, offering efficient chip removal while balancing cutting forces for reliable performance in repetitive milling operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Cutter For XOMX 0602-1204 Indexable Inserts 3 Flutes 70mm Cutting Length, 90° - Teknik Makina
Take advantage of a rigid 25 mm shank and a long 70 mm cutting length that together deliver steady material removal and predictable tool life; compatible with SECO XOMX 1204 indexable inserts for quick insert changes. Order the S645TM directly via Metav Werkzeuge or ask our consultants for tailored application advice. Shaft milling cutter S645TM — 25 mm shank, 3‑edge indexable‑insert cutter by Teknik Makina The Shaft milling cutter S645TM is a shank‑mounted milling cutter designed for indexable‑insert machining with XOMX 0602–1204 inserts, suited to demanding production and workshop environments 25 mm shank for rigid clamping Compatible with SECO XOMX 1204 inserts Three cutting edges for smooth cutting Torx screw M3.5x8.5, T10 key specified Constant rigidity for repeatable machining results The rigid 25 mm shank and a total length of 250 mm combine to reduce vibration and maintain tool stability during heavy cuts. This mechanical stability translates into more consistent surface finishes and longer insert life, which helps to reduce rework and scrap rates. Where machine spindle run‑out and clamp rigidity matter, the solid shank design keeps cutting forces predictable and supports higher feed rates without compromising component tolerances. Rapid insert changes and controlled chip removal Equipped for XOMX 1204 indexable inserts and compatible with SECO insert geometry, the cutter uses three cutting edges and a 90° cutting angle to balance chip formation and contact area. The shorter chip pockets and multiple edges allow manufacturers to rotate or replace inserts quickly, minimising downtime. For operators unfamiliar with indexable systems: the cutter accepts pre‑ground inserts that locate precisely, so edge changes restore cutting geometry instantly and preserve batch consistency. Secure fastening and simple maintenance in production Fastening is specified as M3.5x8.5 Torx screw with a T10 key, providing a secure, repeatable clamp for each insert change. The standardised screw and key sizes mean maintenance routines can be streamlined and parts stocked easily. Combined with the 70 mm cutting length, this tool reduces tool change frequency and supports longer uninterrupted runs—an advantage in both contract machining and in‑house production. The design suits toolrooms and industrial users seeking a dependable, indexable‑insert solution that reduces process complexity. Contact Metav Werkzeuge today to discuss the Teknik Makina S645TM, application suitability and insert recommendations; local stock and technical advice are available from Metav Werkzeuge in Emmerich. Technical data Article number: S645TM Brand: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Core dimensions Diameter: 25 mm Shank diameter: 25 mm Cutting length: 70 mm Overall length: 250 mm Weight: 0.856 kg Number of cutting edges: 3 Cutting angle: 90° Features & compatibility For XOMX 0602-1204 indexable inserts (for XOMX 0602-1204 Indexable Inserts) Compatible with SECO insert geometry Torx screw M3.5x8.5 Torx key T10 Three cutting edges for balanced chip control FAQ Which inserts fit this cutter? The cutter accepts XOMX 1204 indexable inserts and is specified for SECO‑compatible geometries; insert designation and size match the S645TM mounting pocket. What are the main dimensions to consider for setup? Key dimensions for the S645TM are a 25 mm shank, 70 mm cutting length and 250 mm overall length, which inform clamping and reach requirements. How many cutting edges does the tool have and what is the cutting angle? The tool has three cutting edges and a 90° cutting angle, offering balanced engagement and favourable chip segmentation. What fastening hardware is specified for insert clamping? Fastening is by M3.5x8.5 Torx screw with a T10 drive, ensuring reproducible clamp force during insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Cutter For XOMX 1204 Indexable Inserts 3 Flutes 45mm Cutting Length, 90° - Teknik Makina
Benefit from a robust, insert-ready milling solution with a 25 mm shank, three stable cutting edges and secure Torx clamping for repeatable results; order directly via Metav Werkzeuge or ask our consultants for compatibility advice. Schaftfräser S642TM – Insert milling cutter with Ø25 mm shank, for XOMX 0602–1204 indexable inserts (Teknik Makina) A versatile Schaftfräser S642TM designed as an indexable insert milling cutter for machining operations that require fast insert changes and secure clamping with a Torx screw system. 25 mm shank diameter for high rigidity Compatible with XOMX 0602–1204 indexable inserts Three cutting edges for steady material engagement Improved productivity through insert compatibility and secure clamping The S642TM is engineered for reliable insert milling by accepting XOMX 0602–1204 indexable inserts, which simplifies tool stocking and shortens changeover times. With a 25 mm shank and three cutting edges, the tool delivers increased stiffness and better load distribution compared with smaller shanks. The clamping is handled by a M3.5x8.5 Torx screw tightened with a T10 key, providing consistent seat pressure and repeatable tool setup. For workshops and production lines seeking predictable cycle times, the combination of insert replaceability and a robust holder contributes directly to higher machine availability. Fewer interruptions — cost-efficient maintenance and quick insert swaps Indexable inserts mean worn cutting edges are replaced rather than the whole cutter, which reduces maintenance effort and inventory costs for complete tools. The S642TM’s secure Torx fastening reduces the likelihood of insert movement during heavy cuts, helping to avoid rework and maintain throughput. At a modest mass of 0.443 kg, the cutter balances rigidity and handling ease during tool changes. Compatibility with established insert suppliers such as SECO supports flexible selection of grades and geometries, allowing the toolholder to be adapted to varying production demands without changing the holder itself. Precise geometry for consistent results and clean shoulders With a 90° cutting angle and an effective 45 mm cutting length, this insert milling cutter is suitable for square-shoulder milling and operations requiring defined step transitions. The nominal Ø25 mm diameter ensures a stable cutting path, while the three edges provide smooth engagement and reduced vibration under typical milling feeds. For operators less familiar with insert tooling, a 90° cutting angle means the tool produces vertical faces with minimal allowance for finishing, which is beneficial when dimensional conformity and surface consistency are priorities. For supply and technical matching of the Teknik Makina S642TM insert milling cutter, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt advice and order support Technical data Article number: S642TM Manufacturer: Teknik Makina Suitable for: XOMX 0602–1204 indexable inserts Compatible insert manufacturer: SECO Facts Diameter: 25 mm Shank diameter: 25 mm Cutting length: 45 mm Overall length: 120 mm Number of cutting edges: 3 Weight: 0.443 kg Cutting angle: 90° Special features Torx screw M3.5x8.5 Torx key T10 For XOMX 0602–1204 indexable inserts SKU S642TM FAQ What types of inserts fit this cutter? The cutter accepts XOMX 0602–1204 indexable inserts; compatibility with SECO inserts is indicated for flexibility in grade selection. How is the insert secured in the S642TM? Inserts are clamped using a Torx screw (M3.5x8.5) tightened with a T10 key, which ensures repeatable seating and stable cutting. What machining tasks is this insert cutter suited for? With a 90° cutting angle and a Ø25 mm diameter, the tool is well suited to square-shoulder milling and operations requiring defined vertical faces. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Cutter Head For ADMT 1204 Indexable Inserts, 3 Flutes 40mm Cutting Length, 90° - Teknik Makina
Take advantage of the combination of a 25 mm shank for high clamping stability and quick insert changes via a Torx M3x7 fixing to keep machining runs productive; order through Metav Werkzeuge or consult our specialists for application guidance. S501-1TM – Indexable insert milling cutter, 25 mm shank (Teknik Makina) The S501-1TM is an indexable insert milling cutter designed for industrial milling with ADMT 1204 indexable inserts, offering a compact 120 mm overall length for versatile use in production settings. Compatible with ADMT 1204 inserts 25 mm shank diameter for stable clamping Three cutting edges for efficient material removal Torx M3x7 screw with T8 key for secure fixing Greater machining stability through a robust shank A reliable clamping interface reduces vibration and delivers repeatable results in serial production. The 25 mm shank provides increased rigidity compared with smaller holders, which helps to improve surface finish and extend tool life. This stability translates directly into fewer rejects and more predictable machining windows, making the cutter a sound choice where consistent performance is required. The combination of a solid shank and compact overall dimensions supports both short setups and longer production runs. Fast insert changes and reliable cutting geometry Compatibility with ADMT 1204 indexable inserts simplifies maintenance and reduces downtime: inserts are located and secured with a Torx M3x7 screw and accessed using a T8 key. The tool’s three cutting edges and 90° cutting angle enable efficient material removal with predictable chip formation. For operations that demand quick tool swaps, this holder design lowers non-productive time and keeps machines running, while the standardised fixing hardware ensures secure seat repeatability after each change. Compact dimensions that support flexible setups The cutter’s 40 mm cutting length and 120 mm overall length provide a balanced reach for general milling tasks without excessive overhang. With a nominal diameter of 25 mm and a lightweight construction at 0.443 kg, the tool is easy to handle during setup yet sufficiently robust during cutting. The compact form factor is particularly suited to milling centres and smaller machining centres where tool length and balance are important for chatter suppression and axis load management. Practical benefits for workshop and production planning Using an indexable insert system reduces per-cutting-edge cost while enabling a rapid response to wear. The standardised insert form and familiar fixing method result in straightforward logistics and simplified spare-part stocking. Where series stability and low setup time are priorities, this indexable milling solution provides a pragmatic balance between performance and maintainability. For customers who require detailed specifications or confirmation of compatibility with specific insert grades, Metav Werkzeuge’s consultative expertise is available to support selection and integration. For application-specific advice on the Teknik Makina S501-1TM or to arrange supply via Metav Werkzeuge, contact Metav Werkzeuge GmbH in Emmerich or email info@metav-werkzeuge.com Technical data Article number: S501-1TM Manufacturer: Teknik Makina Product: Indexable insert milling cutter for ADMT 1204 indexable inserts Dimensions & weight Shank diameter: 25 mm Cutting length: 40 mm Diameter: 25 mm Overall length: 120 mm Weight: 0.443 kg Features & compatibility Compatible with ADMT 1204 indexable inserts Cutting edges: 3 Cutting angle: 90° Torx screw: M3x7 Torx key: T8 Compatible insert manufacturer: Walter FAQ Which inserts fit this milling cutter? The cutter is designed for ADMT 1204 indexable inserts; compatible inserts from Walter are suitable for standard applications. How are the inserts secured? Inserts are fixed with a Torx M3x7 screw and tightened or released using a T8 key for reliable clamping. How many cutting edges does the tool have? The holder accommodates inserts to provide three cutting edges, supporting effective material removal. What are the main dimensions to consider for setup? Key dimensions: 25 mm shank diameter, 40 mm cutting length, 120 mm overall length; weight 0.443 kg. Is this cutter suitable for short production runs and frequent index changes? The indexable system and standardised fixing facilitate quick insert changes, making the tool economical for varied production demands. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Cutter Head For ADMT 1606 Indexable Inserts 90° Cut, 60mm Cutting Length - Teknik Makina
Take advantage of a rigid 25 mm shank and a precise 90° cutting angle for accurate shoulder milling and consistent tool life; the combination of a 60 mm cutting length and compatibility with ADMT 1606 indexable inserts ensures stable chip control and efficient changeover — order the S460TM directly via Metav Werkzeuge or ask our consultants for application advice. Shank-mounted milling cutter S460TM — for ADMT 1606 indexable inserts, 25 mm shank (Teknik Makina) The Shank-mounted milling cutter S460TM is a purpose-built insert cutter for face and shoulder milling using ADMT 1606 indexable inserts, designed for secure clamping and repeatable positioning in production environments 90° cutting angle for square shoulder milling 25 mm shank diameter for high rigidity Compatible with ADMT 1606 indexable inserts (Walter) Fast clamping with M4x10 Torx screw (T15) Stable clamping for consistent precision With a 25 mm shank and a compact overall length of 150 mm, this cutter delivers the rigidity required for repeatable machining operations. The 60 mm effective cutting length provides sufficient engagement while keeping overhang low, which reduces vibration and improves surface finish. The tool’s balanced design and two cutting edges maintain cutting stability during intermittent or continuous passes, helping to protect cycle-time targets and reduce rework. For workshops standardising on indexable systems, the repeatable geometry of this holder supports predictable part quality and process stability. Quick insert changes and robust fastening Changeovers are straightforward thanks to the standardised insert interface for ADMT 1606 plates and the secure fastening with an M4x10 Torx screw tightened using a T15 key. This arrangement minimises set-up time and ensures the insert seat aligns reliably each time, delivering consistent edge position and tool runout control. The use of industry-standard fixing hardware simplifies inventory and maintenance planning and reduces downtime between shifts — a tangible productivity advantage for batch production and job-shop environments. Purpose and performance for productive milling The 90° geometry gives true perpendicular faces and crisp shoulders, making the cutter suitable wherever accurate right-angle features are required. Compatibility with Walter-design ADMT 1606 inserts allows operators to select grades and geometries for the application, balancing tool life and surface integrity. At a weight of 0.534 kg the assembly remains manageable for handling while still offering sufficient mass to dampen minor chatter. Overall, the design focuses on reliable machining, simple serviceability and predictable performance — qualities that support continuous production and ease tool management. Contact Metav Werkzeuge for tailored specification support and secure supply of the S460TM — Metav Werkzeuge is available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to discuss tooling configurations and delivery options Technical data Article number: S460TM Manufacturer: Teknik Makina Name: Shank-mounted milling cutter for ADMT 1606 indexable inserts Core data Shank diameter: 25 mm Cutting length: 60 mm Overall length: 150 mm Diameter: 25 mm Number of cutting edges: 2 Weight: 0.534 kg Cutting angle: 90° Special features Compatible with ADMT 1606 indexable inserts (Walter) Fastening: M4x10 Torx screw, T15 key Design: shank-mounted insert cutter for shoulder and face milling FAQ What insert type does this cutter accept? The S460TM accepts ADMT 1606 indexable inserts; the cutter body is designed to locate and secure those plates reliably. Which screw and key are required to secure the inserts? Inserts are secured with an M4x10 Torx screw, tightened using a T15 key for consistent clamping force. What primary machining tasks is this cutter intended for? This shank-mounted cutter is intended for face and shoulder milling where a 90° cutting angle delivers perpendicular faces and accurate shoulders. How does the 25 mm shank benefit machining performance? A 25 mm shank increases rigidity and reduces deflection compared with smaller shanks, improving surface finish and dimensional stability. Is the cutter compatible with inserts from other manufacturers? The body is specified for ADMT 1606 geometry; compatibility with other manufacturers depends on matching the insert seat and clamping method, as used by Walter-design inserts Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Cutter Head For ANHX 1004-1206 Indexable Inserts 3 Flutes, 35mm Cutting Length, 90° Cut Angle - Teknik Makina
Take advantage of a compact, indexable design that combines secure clamping and rapid insert changes for uninterrupted milling performance; the combination of a 25 mm cutting diameter, 20 mm shank and reliable Torx clamping reduces setup time and supports steady cuts—order directly via Metav Werkzeuge or consult the sales team for application advice. Shank cutter S762TM — indexable shank cutter, 25 mm diameter, TekNik Makina The Shank cutter S762TM is a robust indexable cutter designed for face and shoulder milling with ANHX 1004–1206 indexable inserts, offering a compact profile for general machining and industrial workshop use. 25 mm cutting diameter Compatible with ANHX 1004 inserts Three cutting edges for stable cuts 20 mm shank with Torx M3x7 fastening Consistent chip control for reliable milling results A tool engineered for stability and predictable performance, the S762TM combines a 25 mm cutting diameter with three cutting edges and a 90° cutting angle to deliver clean shoulder cuts and reduced vibration. The indexable-insert concept separates the cutting geometry from the shank, so the cost of wear is limited to inserts alone. For operations where repeatability matters, this configuration encourages consistent chip formation and surface finish while keeping per-cut costs lower than solid-carbide alternatives. Fast insert changes and secure clamping to reduce downtime Changeovers are simplified by the Torx clamping hardware: a M3x7 screw secured with a T8 Torx key ensures a positive, repeatable seat for each insert. The cutter accepts ANHX 1004–1206 indexable inserts (compatible with Palbit types), enabling rapid replacement and flexible selection of grades for different workpiece demands. A 20 mm shank gives rigid support in standard toolholders, while the 35 mm cutting length and 155 mm overall length provide the reach and clearance required for many milling set-ups. Built for everyday production with focused serviceability Weighing 0.432 kg, this indexable shank cutter balances mass for stable rotation without excess bulk, aiding toolholder balance and tool-change ergonomics. The modular nature of the design means wear is confined to inserts, which supports predictable tool-stock management and straightforward maintenance planning. For workshops aiming to streamline tooling stocks, the S762TM offers a practical mix of serviceability and performance that aligns with routine production schedules. For detailed application guidance or to arrange supply direct from Metav Werkzeuge in Emmerich—relying on our European stock and consultation service—please contact Metav Werkzeuge for tailored recommendations and order facilitation Technical data Article number: S762TM Manufacturer: Teknik Makina Designation: Shank cutter for ANHX 1004-1206 indexable inserts SKU: S762TM Facts Cutting diameter: 25 mm Shank diameter: 20 mm Cutting length: 35 mm Overall length: 155 mm Weight: 0.432 kg Number of cutting edges: 3 Cutting angle: 90° Special features Compatible inserts: ANHX 1004–1206 Insert compatibility: Palbit Clamping screw: M3x7 Torx key size: T8 Indexable insert system for reduced running costs FAQ Which inserts fit this shank cutter? The shank cutter S762TM is designed for ANHX 1004–1206 indexable inserts; Palbit-compatible grades are suitable for a range of machining tasks. How is the insert secured? Each insert is fastened with an M3x7 Torx screw tightened with a T8 key, providing a secure and repeatable clamping interface for the S762TM. What are the key dimensions for holder selection? Key dimensions include a 20 mm shank diameter, 25 mm cutting diameter, 35 mm cutting length and 155 mm overall length; these values guide toolholder and machine setup. How many cutting edges does the cutter have? This indexable shank cutter features three cutting edges, offering a balance between material removal rate and stability. Is the cutter suitable for repetitive production work? Yes—its indexable-insert design and compact mass (0.432 kg) make the S762TM suitable for routine production where quick insert changes and predictable tool costs are important. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Cutter Holder For 4NKT 0603 Indexable Inserts, 3 Flutes 30mm Cutting Length - Teknik Makina
Take advantage of a robust, indexable system that combines rigid shank support and proven insert compatibility for uninterrupted production. Benefit from quick insert changes and stable performance with a 25 mm shank and a 30 mm cutting length; order directly via Metav Werkzeuge or ask our consultants for tailored recommendations. Shaft milling cutter S475-1TM – indexable tool for 4NKT 0603 inserts, 25 mm shank (Teknik Makina) The Shaft milling cutter S475-1TM is a shank-mounted milling tool engineered for indexable-insert milling using 4NKT 0603 inserts, suitable for general CNC milling applications where repeatable tool performance and fast insert replacement are required 25 mm shank diameter for rigid holding Compatible with 4NKT06 indexable inserts Total length 200 mm for extended reach Secured with M3x6.5 Torx screw, T8 key Greater stability through a rigid 25 mm shank A firm clamping interface reduces runout and vibration: the 25 mm shank provides the rigidity needed for consistent chip formation and improved surface finish when paired with indexable cutting tips. This stability translates into fewer reworks and steadier cycle times on medium-duty milling operations. With an overall length of 200 mm, the tool gives extra reach for deeper contours while keeping deflection to a minimum. The specification supports machining strategies that demand dimensional reliability without frequent tool changes. Fast insert changes that keep production moving The use of 4NKT06 indexable inserts means replacement is rapid and cost-effective compared with solid-carbide cutters. Insert retention is specified with an M3x6.5 Torx screw and a T8 key, enabling secure clamping and straightforward servicing at the machine. By separating the cutting edge from the tool body, wear management becomes simple: worn inserts can be replaced in minutes, reducing machine downtime and lowering per-part tooling costs for batch production and maintenance cycles. Balanced geometry for versatile milling tasks Equipped with 3 cutting edges and a 30 mm cutting length, the cutter offers a balance between chip evacuation and surface quality. Three flutes typically provide an effective compromise between high material removal rates and accessible chip clearance, which is advantageous for slotting, profiling and light face-milling in a range of workpiece materials when using appropriate inserts. The design supports efficient cutting while allowing operators to fine-tune feed and speed for differing conditions. Trusted supply and application guidance from Metav Sourcing through Metav Werkzeuge connects this Teknik Makina tool to a broad catalogue and experienced technical support. Metav’s stock and advisory services help simplify procurement and ensure compatibility with existing toolholders and insert grades. For workshops and industrial users seeking dependable tooling with clear serviceable elements, the combination of indexable inserts and a robust shank design delivers practical performance improvements and a straightforward maintenance routine. Contact Metav Werkzeuge today for a tailored recommendation or to secure the Teknik Makina S475-1TM shaft milling cutter compatible with 4NKT 0603 inserts and ensure optimal tool selection for specific production requirements Technical data Article number: S475-1TM Manufacturer: Teknik Makina Designation: Shaft milling cutter for 4NKT 0603 indexable inserts eClass: 21180806 ETIM: EC011860 Facts Shank diameter: 25 mm Cutting length: 30 mm Number of cutting edges: 3 Total length: 200 mm Weight: 0.806 kg Diameter: 25 mm Special features Compatible inserts: 4NKT06 Suitable insert supplier: Taegutec Torx screw: M3x6.5 Torx key size: T8 Indexable-insert system for quick edge changes FAQ Which inserts fit this cutter? The cutter accepts 4NKT06 indexable inserts; compatible grades from Taegutec are commonly used with the Teknik Makina S475-1TM for diverse milling tasks. What clamping screw and key are specified? Insert retention is specified as an M3x6.5 Torx screw, tightened with a T8 key, providing secure and repeatable clamping. What is the shank diameter and is it suitable for standard toolholders? The shank diameter is 25 mm, making the tool suitable for toolholders and collets designed for 25 mm shanks, ensuring a rigid connection for most milling spindles. How deep can the cutter machine in one pass? The defined cutting length of 30 mm indicates the maximum effective cutting engagement per pass, while the 200 mm total length offers reach for deeper features. How many cutting edges does the tool have and what does that imply? With 3 cutting edges, the cutter balances chip evacuation and surface finish, making it suitable for slotting and profiling where moderate chip loads and good finish are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm End Mill 90° For BDMT 1704 Indexable Inserts, 2 Cutting Edges, 35mm Cutting Length - Teknik Makina
Take advantage of a rigid 25 mm shank and a perpendicular 90° cutting angle for precise shoulder and face milling with BDMT 1704 indexable inserts; order the cutter directly via Metav Werkzeuge or request specialist advice for integration into existing tool systems. Schaftfräser S578TM – Shank cutter for BDMT 1704 indexable inserts, 25 mm shank, 90° cutting angle (Teknik Makina) Schaftfräser S578TM designed as a 90° shank cutter for robust face and shoulder milling applications using BDMT 1704 indexable inserts 25 mm shank for rigid clamping Compatible with Kyocera BDMT 1704 inserts 90° cutting angle for shoulder milling Torx M4x7 fastening, T15 key specification Stable, compatible tooling for indexable milling operations The S578TM delivers a dependable platform for indexable-insert milling thanks to its 25 mm shank and compatibility with BDMT 1704 inserts from Kyocera. The perpendicular 90° cutting angle permits accurate shoulder and face milling with predictable geometry, reducing the need for secondary operations. For production environments where repeatability matters, the rigid shank diameter supports low runout and consistent contact with the workpiece, which directly improves dimensional reliability and surface finish. Secure clamping and concise assembly details for reduced downtime Assembly and maintenance are simplified by a clear fastening specification: Torx M4x7 screw seating and a T15 key form the mechanical connection for the insert pocket. The cutter features 2 cutting edges, a 35 mm cutting length and a 120 mm overall length, giving a compact yet effective reach for many shoulder milling tasks. The robust connection and measured mass (0.432 kg) contribute to stable cutting conditions, meaning fewer interruptions caused by vibration or insert movement and longer effective tool life per setup. Productivity benefits via indexable inserts and straightforward servicing Using indexable inserts reduces tooling spend and shortens replacement times compared with regrindable cutters. The S578TM accepts standard BDMT 1704 indexable inserts, allowing immediate use of off-the-shelf carbide grades and geometries tailored to aluminium, steel or mixed-material production cycles. Swapping worn inserts restores cutting performance quickly, translating into higher machine availability and lower unit costs over multiple production runs. For operations seeking practical upgrades without retooling machines, this tool is a compact, serviceable option that balances reliability and ease of maintenance. For procurement or technical questions about Teknik Makina shank cutters compatible with Kyocera BDMT 1704 inserts, contact Metav Werkzeuge for tailored advice and supply from Emmerich. Technical data SKU: S578TM Manufacturer: Teknik Makina Brand: Teknik Makina Facts Shank diameter: 25 mm Cutting length: 35 mm Overall length: 120 mm Weight: 0.432 kg Cutting edges: 2 Cutting angle: 90° Diameter: 25 mm Torx screw: M4x7 Torx key: T15 Special features Compatible with BDMT 1704 indexable inserts Suitable for inserts from Kyocera Designed for face and shoulder milling Compact, production-ready shank cutter FAQ Which insert type fits this shank cutter? The S578TM is designed for BDMT 1704 indexable inserts; compatibility with Kyocera inserts is specified in the product data. Is the fastening specification documented for assembly? Yes. The cutter uses a Torx M4x7 fastening arrangement with a T15 key specification for securing the inserts. What applications suit this cutter best? This shank cutter is optimised for 90° face and shoulder milling where rigid clamping and predictable geometry are required. How many cutting edges does the tool provide? The tool is supplied with a configuration utilising 2 cutting edges, balancing material removal rate and stability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm End Mill 90° For R390-1806 Indexable Inserts, 2 Flutes, 150mm Overall Length - Teknik Makina
Take advantage of a robust, 90° indexable milling solution that combines precise compatibility with Sandvik R390-1806 inserts and a rigid 25 mm shank for stable, repeatable results; order directly via Metav Werkzeuge or request specialist advice for insertion and delivery options. Shank milling cutter S603TM — 90° indexable cutter, 25 mm shank, for Sandvik inserts The Shank milling cutter S603TM is designed for indexable insert milling in demanding shop-floor operations, providing secure clamping for R390-1806 inserts and reliable square-shoulder cutting. 90° cutting angle for square shoulders Compatible with Sandvik R390-1806 inserts 25 mm shank diameter, robust body Precise compatibility that reduces setup time and rejects The S603TM is engineered for direct use with Sandvik R390-1806 indexable inserts, allowing rapid replacement and consistent cutting geometry. The M4x11 Torx screw secures inserts reliably; the screw is driven with a T15 key, ensuring straightforward clamping without guesswork. This design reduces fixture adjustments and contributes to shorter setup periods, which translates into higher machine utilisation and more predictable cycle times during shoulder and face milling operations. Rigid shank and cutter geometry for better surface finish A 25 mm shank and a total length of 150 mm provide the stiffness required for accurate machining under load. The tool’s 60 mm cutting length and two cutting edges deliver stable engagement and balanced chip removal, improving surface quality and extending insert life through reduced vibration. The 90° cutting angle produces square shoulders with minimal manual finishing, meaning fewer downstream operations and a cleaner production flow for precision components. Practical productivity benefits on the production floor Designed as a modular milling solution, this cutter supports efficient insert changes and predictable performance across batches. The relatively low mass (approx. 0.53 kg) helps maintain spindle balance while the secure clamping system gives repeatable positioning of the insert seat. For production environments handling mixed runs or frequent tool changes, this configuration helps maintain throughput and reduces non-productive time, delivering a cost-efficient contribution to overall process reliability. Contact Metav Werkzeuge for tailored procurement from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com to confirm insert selection and delivery options Technical data SKU: S603TM Brand: Teknik Makina Compatible inserts: R390-1806 Torx screw: M4x11 Torx key: T15 Core measurements Shank diameter: 25 mm Cutting length: 60 mm Overall length: 150 mm Number of cutting edges: 2 Weight: 0.53 kg Cutting angle: 90° Materials & features Compatible with Sandvik R390-1806 indexable inserts Secure clamping system with M4x11 Torx screw Designed for shoulder and face milling Indexable-insert milling body by Teknik Makina FAQ Which inserts fit this cutter? The cutter accepts Sandvik R390-1806 indexable inserts; matching the R390-1806 geometry ensures correct seating and predictable cutting performance with the S603TM milling body. What torque tool is required for insert retention? Insert retention uses an M4x11 Torx screw tightened with a T15 key, providing secure clamping suitable for standard shop-floor practice. Can this tool produce square shoulders reliably? Yes — the 90° cutting angle and the rigid 25 mm shank are configured to produce accurate square shoulders with minimal secondary finishing. Is the cutter suitable for high-volume production? The durable shank and secure insert clamping offer repeatable positioning and reduced downtime, making the S603TM appropriate for medium to high-volume milling tasks where insert changes are frequent. What are the main dimensions to check for spindle compatibility? Key dimensions are the 25 mm shank diameter and 150 mm overall length; verifying these ensures correct fitment and adequate clearance in the machining setup. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm End Mill for 4NKT 06 Indexable Inserts with Internal Coolant, 120mm L - Teknik Makina
Benefit from the combination of internal coolant and compatibility with 4NKT 06 indexable inserts for improved tool life and consistent surface finish; order via Metav Werkzeuge or consult our specialists for application advice. End mill S475-2TM – indexable insert milling cutter, 25 mm shank, internal coolant (Teknik Makina) A robust End mill S475-2TM designed for use with 4NKT 06 indexable inserts, offering coolant-fed cutting for reliable chip evacuation and stable, repeatable milling across a range of machining tasks. Internal coolant for improved tool life 25 mm shank for rigid clamping For 4NKT 06 indexable inserts by Taegutec Torx T8 screws M3x6.2 included Stable cutting performance that reduces rework The cutter delivers consistent chip control thanks to its integrated internal coolant feed directly to the cutting zone. This coolant supply helps to lower cutting temperatures and improves evacuation of swarf, which in turn reduces edge wear and the need for frequent regrinding. For operations where surface finish and dimensional repeatability matter, the coolant-fed design supports longer intervals between insert changes and contributes to a more predictable production output. High rigidity for secure clamping and greater metal removal Engineered with a 25 mm shank and a compact cutting length, the tool offers improved torsional stiffness and axial stability during interrupted cuts. The rigid holder geometry enables higher feed rates and better resistance to chatter compared with thinner-shank alternatives, helping to shorten cycle times while maintaining tool life. Operators working on moderate- to heavy-duty milling tasks will notice fewer vibration-related defects and a steadier dimensional result. Fast insert changes and maintenance for minimal downtime The system accepts 4NKT 06 indexable inserts from Taegutec and uses a Torx T8 fastening system with M3x6.2 screws, making insert replacement quick and reliable. The use of standardised fastenings simplifies toolroom stockkeeping and allows for rapid reassembly, reducing non-productive time at the machine. For components that require routine index or insert swaps, the design supports a streamlined maintenance routine and predictable production planning. For procurement or technical matching of the Teknik Makina S475-2TM, contact Metav Werkzeuge for tailored advice and assistance with specification and delivery. Technical data Article number: S475-2TM Manufacturer: Teknik Makina Product type: End mill (indexable) Facts Shank diameter: 25 mm Overall length: 120 mm Cutting length: 30 mm Number of cutting edges: 4 Weight: 0.474 kg Special features Internal coolant: yes Compatible inserts: 4NKT 06 (Taegutec) Torx key: T8 Torx screw: M3x6.2 FAQ What inserts fit this cutter? The cutter is designed for 4NKT 06 indexable inserts; the tool is compatible with Taegutec inserts sized to that designation. Does the tool provide through-coolant capability? Yes, the S475-2TM features internal coolant channels that supply coolant directly to the cutting edges for improved thermal control. What shank diameter is required for the holder? The tool has a 25 mm shank diameter and requires a suitably sized, rigid collet or holder for secure clamping. How many cutting edges are fitted to the milling head? The milling head is configured with four cutting edges to balance material removal rate and surface finish. Which fastening hardware is used for insert clamping? Insert clamping uses Torx T8 fastenings and M3x6.2 screws to ensure secure, repeatable retention. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm End Mill For ADKT 10T3 Indexable Inserts With Internal Coolant, 4 Flutes - Teknik Makina
Robust indexable milling performance with internal coolant and a 25 mm shank delivers stable clamping and efficient material removal; compatible with ADKT 10T3 inserts from Korloy and supplied under SKU S079TM. Order the milling cutter directly via Metav Werkzeuge or ask our consultants if needed. 25mm Shank Milling Cutter for ADKT 10T3 Indexable Inserts (Teknik Makina) — Internal Coolant, L115 mm A 25mm shank milling cutter for ADKT 10T3 indexable inserts designed to provide stable, repeatable milling performance across a range of workshop and production tasks. Internal coolant for reliable chip control Compatible with ADKT 10T3 Korloy inserts 25 mm shank for stable clamping Durable design with four insert pockets Stable clamping and consistent cutting performance The cutter combines a 25 mm shank with an overall length of L115 mm, engineered to reduce vibration and improve runout stability during aggressive material removal. Acceptance of ADKT 10T3 indexable inserts, widely available from Korloy, means tool costs are kept predictable while allowing fast, economical insert changes. The four insert pockets ensure even load distribution and consistent cutting forces, which translates into predictable cycle times and improved surface quality on the workpiece. Coolant-through design for improved tool life and surface finish The coolant-through channel provides targeted cooling directly at the cutting edge, enhancing chip evacuation and reducing heat build-up in the cutting zone. This design helps preserve insert geometry and maintain a steady cutting edge for longer, lowering downtime for insert changes. For operations sensitive to thermal distortion, the internal coolant feature supports more stable dimensions and a finer finish, so the cutter contributes to higher first-pass quality and fewer rework cycles. Easy maintenance and secure fastening for industrial use Fast, secure insert clamping is achieved with standard Torx fastening: a T8 Torx key fits the included screw specification M2.5x5.5, enabling quick insert replacement and straightforward workshop service routines. With a compact mass of 0.4 kg, the tool balances rigidity and manoeuvrability in the tool holder, simplifying setup and reducing operator strain during tool changes. The overall configuration supports flexible integration into established milling setups while keeping service intervals short and predictable. For reliable indexable milling solutions request Teknik Cutting Tools’ 25mm shank milling cutter S079TM through Metav Werkzeuge or contact our team for tailored selection advice Technical data SKU: S079TM Manufacturer: Teknik Makina Product type: Shank milling cutter Compatible inserts: ADKT 10T3 Insert supplier: Korloy Internal coolant: Yes Core data Diameter: 25 mm Overall length: 115 mm Shank diameter: 25 mm Cutting length: 40 mm Number of insert pockets: 4 Weight: 0.4 kg Torx key: T8 Torx screw: M2.5x5.5 Special features Coolant-through design Compatible with Korloy ADKT 10T3 inserts Four insert pockets for even load distribution Fastening with T8 Torx and M2.5x5.5 screws FAQ Which indexable inserts are compatible with this cutter? The cutter accepts ADKT 10T3 indexable inserts; Korloy inserts in this designation are compatible with the S079TM tool. Is the tool coolant-through? Yes, the S079TM shank milling cutter features internal coolant to support chip evacuation and temperature control at the cutting edge. What shank diameter and overall length does the tool have? The tool has a 25 mm shank and an overall length of 115 mm, offering a balance between rigidity and reach. How are the inserts secured and which fastening tools are required? Inserts are secured with Torx screws specified as M2.5x5.5; a T8 Torx key is used for replacement and tightening. For which applications is this milling cutter suitable? This indexable-insert cutter is intended for general milling operations where stable clamping and coolant-through capability improve productivity and finish quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
High-performance shank cutters and ball nose cutters for efficient milling
Insert shank cutters and ball nose cutters combine flexibility and productivity for a wide range of milling tasks. The category covers steel-bodied shank cutters fitted with indexable inserts for economical roughing, face milling, cornering and slotting, as well as ball nose cutters for contouring and 3D finishing.
How these tools work and where they belong
Shank cutters with indexable inserts use a carrier body made from hardened steel; the cutting edges are provided by removable inserts rather than a solid tool blank. Where tools do not have internal coolant, process heat and chips are managed via external coolant nozzles or compressed air, which is sufficient for open, surface-level and easily accessible milling on standard materials. Shank cutters with internal coolant feature fine internal channels that deliver coolant or blasting air directly to each cutting edge under pressure. This targeted supply is essential for deep pockets, cavities, full slotting and machining of heat-resistant or difficult-to-machine materials, because it prevents chip re-cutting, protects cutting edges from thermal overload and enables higher feed rates and improved surface quality.
Cut cycle times and reduce tooling costs
- Replaceable indexable inserts reduce consumable costs and shorten tool change time.
- Targeted internal coolant improves chip evacuation and extends insert life.
- Robust steel carrier bodies enable heavy-duty roughing without frequent tool replacement.
- Suitable for roughing, planing, corner milling and slot milling as well as precision 3D profiling with ball nose cutters.
A practical choice for purchasing and stocking tools
Metav brings a pragmatic purchasing advantage: a broad range of milling solutions is available from a single European quality hub. Metav’s focus on democratising precision means workshops benefit from a wide assortment, consistent quality control from Emmerich and steady supply — supported by decades of expertise and over 48,000 satisfied customers. Choose Metav for a centralised sourcing strategy that reduces supplier complexity while keeping access to both insert milling cutters (also referred to as insert milling cutters or indexable end mills) and ball nose cutters (also known as ball nose end mills or radius cutters) straightforward.
Quick summary
Insert shank cutters and ball nose cutters deliver flexible, cost-effective milling: replaceable inserts lower running costs, and internal coolant options enable higher performance and longer tool life where chip control is critical.
FAQ
When should I choose a shank cutter with indexable inserts rather than a solid carbide end mill?
Choose shank cutters with indexable inserts for economical roughing and high-stock-removal tasks where replacing inserts is preferable to replacing an entire tool; they are especially effective for face milling, cornering and slotting operations.
Does internal coolant make a measurable difference for ball nose cutters?
Yes. Internal coolant directed to each cutting edge reduces chip re-cutting and thermal stress, which improves surface finish and increases insert life when machining deep pockets, cavities or heat-resistant materials.
Can shank cutters without internal coolant be used for general workshop milling?
Absolutely. Tools without internal coolant rely on external coolant nozzles or compressed air and are well suited to open, superficial and easily accessible milling on standard materials.
What milling operations are shank cutters for indexable inserts typically used for?
Shank cutters with indexable inserts excel at economical roughing, planfräsen (face milling), corner milling and slot milling; ball nose cutters are the preferred choice for 3D profiling and finishing operations.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com