Efficient shaft cutters and ball nose cutters for versatile milling
Shaft cutters and ball nose cutters serve as robust rotating tools for roughing, face milling, corner milling and slotting, offering economical replacement of indexable inserts rather than whole solid tools. Available in versions with internal coolant to feed lubricant directly to each cutting edge or without internal coolant relying on external nozzles, these cutters ensure effective chip evacuation and thermal control suited to standard materials or deep pocket and cavity work. By preventing chip re-cutting and protecting cutting edges, they deliver higher feed rates, improved surface finish and extended tool life in demanding metalworking applications.
32mm Solid Shank Cutter for LOGU 0303 Indexable Inserts 200mm Overall Length, 5 Flutes - Teknik Makina
Take advantage of a robust combination of high rigidity and precise insert compatibility to maintain stable machining cycles and consistent surface quality. The 32 mm shank together with a 200 mm overall length and 60 mm cutting length ensures dependable clamping and deep-reach capability for medium-duty milling operations; order directly via Metav Werkzeuge or request technical advice from the consultants. Insert Milling Cutter S685TM for LOGU 0303 – 32 mm shank, L200 mm (Teknik Makina) The Insert Milling Cutter S685TM delivers stable, indexable-insert milling for applications using LOGU 0303 inserts, engineered for reliable toolholding and repeatable performance in production environments. 32 mm shank diameter for stable clamping Compatible with LOGU 0303 indexable inserts 200 mm overall length with 60 mm cutting length Five cutting edges for uninterrupted material removal Higher process stability through rigid shank design A robust 32 mm shank and a total length of 200 mm reduce vibration and enable steady tool engagement during interrupted cuts. The combination of shank diameter and mass provides improved stiffness, which leads to more consistent tool life and surface finish. Where deeper reaches are required, the 60 mm cutting length offers extended engagement without compromising clamping security. These factors contribute directly to reduced scrap rates and lower secondary processes in a production setting. Proven insert system and secure fastening for predictable cycles Designed to accept LOGU 0303 indexable inserts, the cutter offers straightforward insert replacement and consistent cutting geometry across tool life. Compatibility with Kyocera-type inserts simplifies procurement for workshops already standardised on that system. The cutter uses an M3x7 Torx screw secured with a T8 key for repeatable clamping torque, which supports secure seat retention and minimises the risk of improper assembly affecting process reliability. Productivity gains through efficient cutting configuration With five cutting edges, the tool supports higher material removal per revolution and smoother chip distribution, which helps to lower cycle time in suitable operations. The tool’s mass (approx. 1.256 kg) and cutting configuration are balanced to favour continuous production runs where consistent performance is required. For machine shops aiming to optimise throughput, this cutter represents a pragmatic choice that balances rigidity, reach and the economy of indexable inserts. Suitable applications and workshop integration This insert milling cutter is intended for general machining tasks where indexable inserts are preferred for economical edge changes and flexible geometry choices. It integrates easily into standard toolholders designed for a 32 mm shank and is suitable for batch production, retooling for different insert grades and for workshops seeking to reduce downtime during insert changes. The datasheet-specified dimensions make it straightforward to plan fixture and toolpath strategies without guesswork. For a reliable supply and expert selection assistance for the Teknik Makina S685TM insert milling cutter, request a technical quote from Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for tailored guidance Technical data SKU: S685TM Label: 32mm Schaftfräser LOGU 0303 L200mm Manufacturer: Teknik Cutting Tools UID: S685TM eClass: 21180806 Core specifications Shank diameter: 32 mm Overall length: 200 mm Cutting length (shank long): 60 mm Number of cutting edges: 5 Weight: 1.256 kg Features Compatible inserts: LOGU 0303 Compatible insert manufacturer: Kyocera Torx key: T8 Torx screw: M3x7 Product type: insert milling cutter FAQ Which inserts fit this cutter? The cutter accepts LOGU 0303 indexable inserts; Kyocera-manufactured inserts confirmed compatible for this insert milling cutter. What are the key dimensions to verify for machine integration? Check the 32 mm shank diameter, 200 mm overall length and 60 mm cutting length against the machine toolholder and available working envelope. How is the insert secured on the cutter? Inserts are fastened using an M3x7 Torx screw tightened with a T8 key to ensure consistent clamp force and repeatable seating. Is this tool suitable for extended reach milling? The 200 mm overall length with a 60 mm cutting length provides moderate reach while maintaining improved rigidity compared with longer, slimmer tools. Can the S685TM be used in automated tool-change systems? Yes; the standard shank diameter and secure torx-fastened inserts are compatible with automated tool-change workflows provided holder geometry matches the 32 mm shank. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Solid Shank Cutter for XNKU 06T3 Indexable Inserts With Internal Coolant, 4 Flutes - Teknik Makina
Take advantage of the combination of precise insert compatibility, internal coolant supply and a robust 32 mm shank for steady, high‑productivity milling; order directly via Metav Werkzeuge or consult our specialists for application advice. Shank cutter S781TM – 32 mm shank, internal coolant, for XNKU 06T3 indexable inserts (Teknik Makina) Shank cutter S781TM for indexable milling, designed to carry XNKU 06T3 inserts for efficient face and peripheral machining in production and workshop environments. 32 mm shank diameter for high stability Internal coolant supply to the cutting zone Compatible with XNKU 06T3 indexable inserts Overall length 200 mm for extended reach Faster machining through optimised insert integration The S781TM is built around the proven XNKU 06T3 insert system, enabling predictable chip control and consistent edge engagement across operations. With 4 cutting edges and a direct coolant feed, the tool supports higher material removal rates and improved tool life by flushing chips away from the cutting zone. This results in shorter cycle times and fewer unplanned tool changes, making the cutter an efficient choice for workshops seeking measurable productivity gains. Easy servicing and secure clamping to reduce downtime Designed for straightforward maintenance, the cutter uses a T8 Torx drive and M2.5x5.5 screws for insert retention, allowing rapid, repeatable insert changes with standard workshop tools. The secure clamping system minimises vibration and runout, which protects insert edges and maintains surface finish. Clear specification of fastening hardware simplifies spare-part management and reduces set‑up time between operations. Rigidity and reach for stable, precise milling A 32 mm shank combined with a 200 mm overall length and a 120 mm cutting length provides an effective balance between reach and stiffness, suitable for a wide range of milling tasks where stability matters. The mass of the tool (approx. 1.088 kg) contributes to dampening of minor disturbances, improving dimensional consistency on longer cuts. Compatibility with Palbit-made inserts ensures widespread availability of cutting geometries and grades for varied materials and cutting conditions. Practical guidance for selection and application Select the cutter when axial reach and reliable coolant delivery are required alongside flexible insert choice. The combination of internal coolant and indexable inserts supports operations where chip evacuation and edge cooling are decisive for component quality. For tailored recommendations on insert grades, cutting data and fixture compatibility, Metav Werkzeuge’s application advisors can provide concrete, workshop‑level guidance to match the cutter to the job. Contact Metav Werkzeuge for application advice or to request the Teknik Makina S781TM — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com for prompt, workshop-focused support and supply from Emmerich Technical data SKU: S781TM Manufacturer: Teknik Cutting Tools Product type: Shank cutter Compatible inserts: XNKU 06T3 (Palbit) Facts Shank diameter: 32 mm Overall length: 200 mm Cutting length (shaft): 120 mm Cutting edges: 4 Weight: 1.088 kg Torx key: T8 Torx screw: M2.5x5.5 Special features Internal coolant supply Indexable insert system compatibility Robust shank for reduced runout Standard Torx fastening for quick servicing FAQ Which inserts fit this cutter? The S781TM accepts XNKU 06T3 indexable inserts; insert availability is widely supported by Palbit. Is there internal coolant and why does it matter? Yes — internal coolant delivers cutting fluid directly to the cutting edge, improving chip evacuation and edge life for the S781TM during demanding cuts. What shank diameter and reach does the tool offer? The tool features a 32 mm shank and 200 mm overall length with a 120 mm cutting length, providing a balance of rigidity and extended reach. Which fastening tools are required for insert changes? Insert clamping uses a T8 Torx and M2.5x5.5 screws, enabling quick, repeatable insert replacement with common workshop tools. For which applications is this cutter suitable? The indexable shank cutter is suited to general face and peripheral milling where a stable shank and coolant supply improve productivity and edge life; discuss specific material and grade selection for optimal results. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Solid Shank End Mill for ANHX 1206 Indexable Inserts with Internal Cooling, 200mm Length - Teknik Makina
Reliable stability and effective chip evacuation come together in this indexable-insert milling solution: a 32 mm shank and built-in internal coolant deliver consistent machining results across medium-production runs; order the cutter directly via Metav Werkzeuge or consult our specialists for process matching. Shaft milling cutter S765-2TM — 32 mm shank, internal coolant (Teknik Makina) A shaft milling cutter designed for ANHX 1206 indexable inserts, offering robust clamping stability and coolant-fed cutting for CNC milling applications. 32 mm shank diameter for stable clamping Internal coolant for improved chip control Compatible with ANHX 1206 Palbit inserts Higher productivity through stable clamping and coolant-fed cutting The tool body is engineered around a 32 mm shank, which ensures secure clamping and reduced runout for repeatable cuts. With a 200 mm overall length and a 130 mm cut-capable shank length, the design balances reach and rigidity for common milling setups. The integrated internal coolant channel directs coolant to the cutting zone, improving chip evacuation and reducing thermal load on the inserts — a straightforward way to extend tool life and maintain consistent surface finish in serial production. Quick insert changes and straightforward maintenance Designed for use with ANHX 1206 indexable inserts from Palbit, the cutter accepts three insert positions to support continuous material removal. The fastening system uses a T10 Torx interface and M3.5x8.5 Torx screws, allowing rapid, standardised replacement and secure seating of each insert. Indexable-insert systems separate the cutting edge from the tool body, enabling economical insert rotation or replacement without regrinding and maintaining machine uptime in busy workshops. Seamless integration into workshop and production workflows With a mass of 0.92 kg and three cutting edges, the tool offers a predictable dynamic behaviour when mounted in common milling spindles, helping to achieve stable feeds and cycle times. The combination of a compact shaft diameter and internal cooling supports application flexibility on CNC milling centres where coolant-fed tools are preferred for temperature control. The robust construction and standardised fastening mean simple inventory management and dependable interchangeability across similar toolholders. Contact Metav Werkzeuge to discuss suitability for specific parts, secure the Teknik Makina S765-2TM for your tooling range and benefit from expert advice and reliable supply from Emmerich. Technical data SKU: S765-2TM Type: Shaft milling cutter Brand: Teknik Makina Label: 32mm shaft milling cutter ANHX 1206 L200mm with internal coolant Facts Diameter: 32 mm Overall length: 200 mm Cut-capable shank length: 130 mm Weight: 0.92 kg Cutting edges: 3 Torx key: T10 Torx screw: M3.5x8.5 Design & special features Internal coolant Compatible with ANHX 1206 inserts Suitable for Palbit inserts Indexable-insert system FAQ What insert type does this cutter accept? The cutter accepts ANHX 1206 indexable inserts; it is designed to work with Palbit-compatible ANHX-style inserts. Is the tool coolant-fed and what is the benefit? Yes — the internal coolant supply directs fluid to the cutting zone, improving chip evacuation and helping to extend insert life. How many insert positions are fitted on the cutter? The tool features three cutting-edge positions, allowing continuous material removal and balanced cutting action. Which fastening hardware is required for the inserts? Inserts are secured with M3.5x8.5 Torx screws using a T10 Torx driver for reliable clamping. Can this cutter be used in standard milling holders? The 32 mm shank diameter and standard tooling interfaces make the cutter suitable for common milling spindles and holders used in CNC operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Solid Shank Milling Cutter for LNMU 0303 Indexable Inserts 150mm Cutting Length - Teknik Makina
Benefit from the combination of a stable 32 mm shank, compatibility with LNMU 0303 indexable inserts and a 150 mm overall length for reliable peripheral milling and extended reach. Order directly via Metav Werkzeuge or consult our specialists for technical guidance and availability. 32 mm Insert Milling Cutter for LNMU 0303 — L150 mm (Teknik Makina) The 32 mm Insert Milling Cutter for LNMU 0303 — L150 mm is an indexable cutter designed for industrial peripheral milling where rigidity and fast insert changes are essential 32 mm shank diameter for stable clamping Compatible with LNMU 0303 indexable inserts 150 mm overall length for deep reach Five cutting edges for increased productivity Torx T8 screw system M2.5x7 for quick insert changes Enhanced rigidity for consistent machining results The cutter from Teknik Makina combines a substantial 32 mm shank with a carefully balanced design to reduce vibration and improve surface quality during milling. A larger shank diameter increases clamping stability and torque transmission, which in turn reduces chatter in interrupted cuts. For operations that require repeatable dimensional accuracy, this tooling offers a dependable foundation that supports higher material-removal rates while maintaining process stability. Fast serviceability with standardised insert fixation Designed for indexable tooling workflows, the holder accepts LNMU 0303 inserts and uses a Torx fixation to speed up maintenance. The Torx T8 key and M2.5x7 screw arrangement permit rapid insert replacement and secure clamping without specialised fixtures. Indexable inserts offer a consistent cutting edge geometry and economical regrinding or replacement; consequently, tool changeover time is minimised and machine uptime is maximised, making the system well suited to batch production and diverse material runs. Reach and cutting capacity for practical workshop use With a 150 mm overall length and a 60 mm cutting length, the tool balances reach and rigidity for a range of peripheral and face milling tasks. The configuration of five cutting edges distributes cutting forces and can improve feed rates and tool life in many materials. The cutter’s mass (approx. 1.012 kg) contributes to steady cutting dynamics without creating excessive spindle load when set up on suitably rated holders. These dimensions support work on medium-duty milling applications where a combination of reach and mechanical stiffness is required. For robust, high-stability milling from Teknik Makina, contact Metav Werkzeuge for personalised supply and technical advice — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S687TM Manufacturer: Teknik Makina Product type: Milling cutter (insert) Core dimensions Diameter: 32 mm Shank diameter: 32 mm Overall length: 150 mm Cutting length: 60 mm Number of cutting edges: 5 Weight: 1.012 kg ECLASS: 21180806 Special features Compatible with LNMU 0303 indexable inserts Compatible insert manufacturer: Tungaloy Torx key: T8 Torx screw: M2.5x7 Label: 32mm Schaftfräser LNMU 0303 L150mm FAQ Which insert type does the cutter use? The cutter accepts LNMU 0303 indexable inserts; this standard insert type allows use of inserts from manufacturers such as Tungaloy with the S687TM holder. What shank and clamping dimensions are required? The tool is fitted with a 32 mm shank and is intended for holders that accommodate a 32 mm diameter — the robust shank size aids secure clamping and stable torque transmission. How long is the tool and what is the effective cutting length? Overall length is 150 mm with an effective cutting length of 60 mm, offering a compromise between reach and rigidity for peripheral milling tasks. How many cutting edges are provided and what is the benefit? The cutter is equipped with five cutting edges, which helps distribute cutting forces, increase feed capability and can extend the interval between indexings versus fewer-edge configurations. Which fasteners and keys are needed for insert changes? Insert retention uses a Torx T8 fastening system and M2.5x7 screws, enabling quick and repeatable insert replacement with standard workshop tools. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Solid Shank Roughing End Mill for ADKT 1505 Indexable Inserts, 3 Flutes 60mm Cutter Length - Teknik Makina
Take advantage of the combination of rigid clamping, extended cutting length and indexable-insert flexibility to improve cycle stability and reduce downtime; order the tool directly via Metav Werkzeuge or consult the specialists for technical matching. Shank cutter S320TM — for ADKT 1505 indexable inserts, 32 mm shank (Teknik Makina) A robust Shank cutter S320TM designed for milling with ADKT 1505 indexable inserts, suited to medium and heavy-duty CNC milling where repeatable accuracy and fast insert changes are required Designed for ADKT 1505 indexable inserts 32 mm shank diameter for stable clamping 60 mm cutting length for deeper machining Compatible with ISCAR insert manufacturers High rigidity for consistent surface finish and tool life The combination of a 32 mm shank and a 200 mm overall length gives a stable connection between toolholder and spindle, minimising runout and vibration during interrupted cuts. Reduced chatter and improved stability translate directly into more consistent component geometries and extended insert life, making the tool suitable for batch production and demanding series work. The mass of 1.198 kg contributes to damping of cutting forces without compromising handling during tool change. Efficient material removal with indexable inserts Designed around the ADKT 1505 system, the cutter accepts standard indexable inserts that permit rapid replacement and consistent cutting geometry. The three‑edge configuration of 3 flutes ensures balanced cutting and reliable chip evacuation across a variety of materials, while the 60 mm cutting length enables deeper engagements where required. This design reduces machine idle time and supports a predictable cost-per-part calculation by separating the cutting edge from the carrier body. Practical fastening and service features for workshop use Retention is secured with an M4x10 Torx screw, driven by a T15 Torx key, enabling secure clamping of the insert seat and straightforward maintenance in the workshop environment. The standardised fastener type simplifies inventory and service operations, while the tool geometry permits straightforward insert indexing without complicated adjustments. Compatibility with major insert suppliers such as ISCAR helps to ensure availability of grades and geometries for specific materials. Suitable applications and operational benefits for production The tool is optimised for use in general CNC milling, toolroom jobs and industrial production where robustness and predictable behaviour are priorities. Typical applications include roughing and semi‑finishing in steels and general engineering alloys. The modular nature of the indexable system supports fast reconditioning of the cutting edge and keeps machine throughput high, which is especially valuable for subcontractors and in‑house production departments seeking stable, repeatable performance from a compact cutter by Teknik Makina Contact Metav Werkzeuge for procurement and technical advice on the Teknik Makina S320TM shank cutter — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitable insert grades and holder integration Technical data Article number: S320TM Manufacturer: Teknik Makina Facts Shank diameter: 32 mm Cutting length: 60 mm Number of cutting edges: 3 Overall length: 200 mm Weight: 1.198 kg Special features Compatible with ADKT 1505 indexable inserts Compatible with ISCAR inserts Torx screw M4x10 Torx key size T15 ECLASS: 21180806 ETIM: EC011860 FAQ What insert type does the tool accept? The cutter is designed for ADKT 1505 indexable inserts and is compatible with insert grades from ISCAR and other suppliers that match the ADKT 1505 specification. How many flutes does the cutter have and what is the benefit? The tool features 3 flutes, which provide balanced cutting forces and effective chip evacuation for improved surface finish and steadier machining. What are the critical dimensions to consider for holder selection? Key dimensions are the 32 mm shank diameter, the 60 mm cutting length and the 200 mm overall length; these determine rigidity and installation reach in the machine spindle. Which fasteners are required for insert clamping? Insert retention is secured with an M4x10 Torx screw; a T15 Torx key is used for installation and removal. Is the S320TM suitable for deep cutting applications? With a 60 mm cutting length and a robust shank, the S320TM is suitable for deeper engagements within the limits of machine rigidity and recommended insert geometry Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
33mm Back Spotface Cutter 20mm Shank, CCMT Insert Compatible, 152mm Overall Length - Teknik Makina
Take advantage of a robust combination of stable clamping, precise cutting diameter and quick insert replacement for uninterrupted production. Benefit from compatibility with CCMT 09T304 inserts, a 20 mm shank for secure mounting and straightforward assembly via Torx hardware — order through Metav Werkzeuge or request specialist advice for application checks. Back countersink C106TM by Teknik Makina — compatible with CCMT 09T304, 20 mm shank The Back countersink C106TM is a rear-side countersinking tool intended for precision metalworking with indexable inserts, delivering repeatable results in set-up-optimised production environments Back countersink C106TM by Teknik Makina Compatible with CCMT 09T304 indexable inserts 20 mm shank for stable tooling Max cutting diameter 33 mm, overall length 152 mm Stable insert mounting for consistent results The tool features a robust mounting concept that accepts CCMT 09T304 indexable inserts, enabling fast insert changes and predictable component finish. A 20 mm shank ensures dependable clamping in common toolholders, reducing chatter and improving dimensional consistency across batches. The single cutting-edge geometry focuses cutting forces into a defined zone, which supports repeatability and lowers adjustment frequency — a clear economic advantage for serial production. Precision countersinking that supports process reliability With a max cutting diameter of 33 mm and an overall length of 152 mm, the device is configured to reach recessed positions while maintaining cutting stability. The single cutter arrangement offers controlled material removal and a predictable chamfer profile, simplifying subsequent assembly steps where a clean seat for screw heads is required. The construction prioritises machining control and process safety to help maintain consistent component quality across cycles. Quick assembly and maintenance to keep uptime high Fast, secure fastening is provided by the supplied Torx hardware (screw M3.5x8.5) and the designated Torx T15 key engagement, which simplifies re‑tensioning after insert replacement. The modest mass of 0.308 kg and compact geometry assist in straightforward handling during tool changes and inspection. For users seeking integration advice or confirmation of holder compatibility, technical guidance can be provided to ensure a smooth implementation and minimal set-up time on the shop floor. Contact Metav Werkzeuge for tailored integration advice or to reserve the C106TM; direct technical enquiries are welcome via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: C106TM Manufacturer: Teknik Makina Designation: Back countersink Facts Cutting diameter (max): 33 mm Body diameter: 21 mm Shank diameter: 20 mm Overall length: 152 mm Cutting edges: 1 Weight: 0.308 kg Torx screw: M3.5 x 8.5 Torx key: T15 Special features For indexable inserts: CCMT 09T304 Fastening: Torx screw M3.5x8.5 (T15) FAQ Which insert type fits this countersink? The C106TM accepts CCMT 09T304 indexable inserts, offering quick replacement and standardised geometry for consistent chamfering. What shank diameter is required for the holder? The tool has a 20 mm shank; ensure the toolholder or collet accommodates a 20 mm shank for secure clamping. What is the maximum cutting diameter and reach? Maximum cutting diameter is 33 mm and the overall length is 152 mm, suitable for accessing recessed rear surfaces. Which fastening hardware is used for the insert? Assembly uses a Torx screw M3.5x8.5; a T15 driver is specified for correct torque and secure clamping. How many cutting edges does the tool have and what is the effect? The device carries 1 cutting edge, which concentrates cutting forces for a predictable chamfer and easier process control. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
33mm Cutter For 3PKT 1004 Indexable Inserts, 32mm Shank 40mm Cutting Length, 3 Flutes - Teknik Makina
Take advantage of a compact, indexable milling solution that combines stable clamping with rapid insert changes; the combination of a Ø33 mm cutting diameter and a 32 mm shank delivers consistent chip control and process reliability. Order the tool directly via Metav Werkzeuge or consult the team for integration advice. Indexable milling cutter S487TM by Teknik Makina — for 3PKT 1004 indexable inserts, Ø33 mm, 3 cuts The Indexable milling cutter S487TM is a robust tool body engineered for industrial milling applications with 3PKT 1004 indexable inserts, designed to provide stable machining over long runs Compatible with Taegutec 3PKT 1004 inserts Ø33 mm cutting diameter 32 mm shank diameter for stable clamping 200 mm overall length, 40 mm cutting length Efficient compatibility that reduces setup time and tooling complexity The tool body is built for proven insert systems, offering straightforward compatibility with 3PKT 1004 indexable inserts and Taegutec geometries. This standardised approach shortens changeover and reduces tooling variants in stock, which directly improves machine uptime. With a Ø33 mm cutting diameter the cutter balances rigidity and chip evacuation, enabling predictable cutting forces and repeatable results in series production. Such compatibility is a rational advantage for production planners seeking predictable throughput. Design features that enhance stability and insert security A substantial 32 mm shank ensures secure clamping in standard tool holders and reduces run-out risk during heavy milling passes. The body uses a Torx M2.5x7 fastening arrangement, requiring a T15 driver for insert fixation — a simple, reliable method that secures inserts firmly while allowing fast replacement. The combination of shank dimension and robust fixing offers a clear benefit: fewer vibrations, improved surface finish and extended tool life for the inserts, which translates into lower process costs over time. Practical dimensions for workshop logistics and handling At an overall length of 200 mm and with a 40 mm cutting length, the cutter fits common mill setups without compromising reach or rigidity. The balanced geometry and modest mass (approx. 0.495 kg) make handling and tool changes uncomplicated on the shop floor. The body is optimised for indexable inserts, so maintenance consists mainly of routine insert changes and screw checks — straightforward tasks that keep downtime to a minimum and support consistent production performance. Reliable supply and integration support from Metav Beyond the technical benefits, the tool is backed by a dependable supply channel that suits workshop procurement. Choosing a standardised indexable cutter body reduces the number of special orders and supports a lean stocking strategy. For planners and purchasers, the combination of standard insert compatibility and solid mechanical design delivers a pragmatic route to stable machining results and predictable inventory management. Discuss integration of the Teknik Cutting Tools S487TM and secure dependable supply via Metav Werkzeuge GmbH — contact Metav Werkzeuge for ordering and technical coordination at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S487TM Manufacturer: Teknik Makina Designation: Indexable milling cutter for 3PKT 1004 Indexable Inserts Brand: Teknik Makina Facts Cutting diameter: 33 mm Shank diameter: 32 mm Number of cutting edges: 3 Overall length: 200 mm Cutting length: 40 mm Weight: 0.495 kg Torx screw: M2.5x7 Torx key size: T15 Special features Compatible with Taegutec inserts For 3PKT 1004 indexable inserts Indexable insert system tool body Robust shank for stable clamping FAQ What inserts fit this cutter? The cutter accepts 3PKT 1004 indexable inserts; compatibility with Taegutec insert geometries is specified for straightforward replacement and performance. Which driver is required for insert fixation? Insert screws use a Torx M2.5x7 fastener; a T15 driver is the correct size for secure tightening. What are the key dimensions to check for holder compatibility? Important dimensions are the 32 mm shank diameter and the 200 mm overall length; these determine holder fit and overhang behaviour. How many cutting edges does the tool provide? The body is configured for 3 cutting edges, permitting balanced chip formation and steady cutting forces in milling operations. Is the tool suitable for long production runs? The combination of a solid shank, standardised insert system and simple insert fixing makes the body suitable for continuous production when managed with correct insert selection. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
33mm Cutter For BLMP 0904 Indexable Inserts With Internal Coolant, 150mm - Teknik Makina
Take advantage of the combination of internal coolant, a compact 33 mm diameter, and secure Torx fastening for consistent chip control and extended insert life; order the insert milling cutter directly via Metav Werkzeuge or consult Metav's specialists for application advice Insert milling cutter S492TM – Insert milling cutter for BLMP 0904, 33 mm diameter, internal coolant (Teknik Makina) Insert milling cutter S492TM designed for indexable-insert milling in industrial and workshop environments, compatible with BLMP 0904 inserts and optimised for secure fastening and coolant-fed machining Internal coolant for reliable chip evacuation Compatible with BLMP 0904 Taegutec inserts 33 mm cutter diameter, 32 mm shank 150 mm overall length with 4 cutting edges Consistent material removal with coolant-fed tip design The insert milling cutter delivers controlled chip evacuation thanks to its integrated internal coolant channel, which directs coolant to the cutting zone and reduces thermal load. This results in more stable cutting conditions and a longer effective life for the replaceable indexable inserts. The tool body’s 33 mm diameter and the specified 40 mm cutting length ensure a predictable metal removal rate and repeatable surface quality for medium-duty pocketing and face-milling tasks, while the robust construction contributes to reduced downtime through fewer unplanned tool changes. Secure clamping and straightforward insert retention Designed for secure mechanical connection, the cutter uses Torx T10 drive and M3.5x8.5 fastening screws for each insert pocket, providing repeatable seat torque and minimised vibration at speed. The 32 mm shank gives a stable interface with the toolholder, improving concentricity and balance. Together these features support consistent geometric tolerances in serial production and make the system suitable for standard milling holders used in CNC machining centres. Broad compatibility with BLMP 0904 indexable inserts The body is configured for BLMP 0904 indexable inserts and is compatible with Taegutec-manufactured inserts, enabling flexible selection of grades and geometries to match workpiece materials and cutting conditions. The insert system allows fast index changes and straightforward inventory management: keeping a small set of insert grades available lets one adapt the same cutter body for roughing or finishing without replacing the entire tool body. Workshop efficiency and maintenance considerations With four cutting positions, the insert milling body offers efficient use of replacement inserts and economical machining cycles. The design supports routine maintenance procedures such as torque checks for the M3.5x8.5 screws and inspection of seat faces for wear. Because the cutter is an indexable system rather than a solid tool, workshops benefit from reduced toolcost per cutting edge and faster turnaround when changing wear parts, improving overall throughput in production runs Contact Metav Werkzeuge for tailored cutting parameters and procurement support referencing SKU S492TM — Metav’s technical consultants will advise on insert grades and holder selection Technical data SKU: S492TM Product type: Insert milling cutter Compatible inserts: BLMP 0904 Manufacturer: Teknik Makina Core specifications Cutter diameter: 33 mm Overall length: 150 mm Shank diameter: 32 mm Cutting length: 40 mm Number of cutting edges: 4 Weight: 1.108 kg Torx key: T10 Fastening screw: M3.5x8.5 Features & compatibility Internal coolant Suitable for Taegutec BLMP 0904 inserts Indexable-insert system Label: 33mm shank milling cutter BLMP 0904 L150mm with internal coolant FAQ What inserts fit the S492TM body? The S492TM insert milling cutter is configured for BLMP 0904 indexable inserts and is compatible with Taegutec grades designed for that insert geometry. Is the cutter coolant-fed and how does that help? Yes, the cutter features internal coolant delivery; targeted coolant reduces heat at the cutting edge, improves chip control and can extend insert life. What fastening hardware is required for the inserts? The cutter uses M3.5x8.5 screws with a Torx T10 drive for secure insert retention and repeatable clamping torque. Can the S492TM be used with common CNC toolholders? The 32 mm shank provides a stable connection for standard toolholders that accept that shank diameter; confirm holder compatibility for the intended spindle and clamping system. How many cutting edges are available before index changes? The cutter body offers 4 insert positions; each position can be indexed or replaced independently, allowing economical reuse of the insert body Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
33mm End Mill for LNMU 0303 Indexable Inserts 32mm Shank 200mm Overall Length, 5 Teeth - Teknik Makina
Take advantage of a robust combination of compatibility, rigidity and straightforward serviceability: the cutter’s 33 mm diameter and compatibility with LNMU 0303 indexable inserts reduce changeover time while the 32 mm shank and 200 mm overall length ensure stable machining. Order the tool directly via Metav Werkzeuge or consult the specialists for machining recommendations. Indexable shank cutter S689TM – 33 mm diameter, for LNMU 0303 indexable inserts (Teknik Makina) A durable Indexable Shank Cutter S689TM designed for high-productivity milling with LNMU 0303 inserts, suitable for a wide range of general machining tasks 33 mm cutter diameter Compatible with LNMU 0303 inserts 32 mm shank diameter 200 mm overall length Boosted throughput with indexable insert technology The tool is built around the LNMU 0303 indexable insert system, which enables rapid insert changes and consistent cutting geometry. Fitting standard Tungaloy inserts lowers tooling costs by allowing multiple reuses of the cutter body while the insert performance ensures repeatable chip control. With 5 cutting edges on the head, machining cycles can be optimised for productive face and shoulder milling, so cycle times are reduced and tool inventory is simplified. Indexable systems also limit downtime compared with solid-carbide replacements, improving shop-floor efficiency. Stiffness and stability for consistent part quality A substantial 32 mm shank provides the axial and radial rigidity necessary for tighter tolerances when machining medium-duty components, while the 33 mm body diameter contributes to a stable cutting platform. The 60 mm cutting length (head cutting length) balances reach and rigidity, making the tool suitable where both access and dimensional control matter. The tool weight of 1.112 kg is consistent with a robust design and supports vibration dampening during interrupted cuts, which helps maintain surface finish and dimensional accuracy across production batches. Simple service and secure clamping for workshop use Maintenance and reconditioning are straightforward: inserts are secured with M2.5x7 Torx screws and a T8 Torx key is used for fastening, ensuring quick, reliable replacement with common workshop tools. The modular design reduces consumable costs and simplifies stockkeeping; workshop teams can replace worn inserts quickly and return the cutter to service without specialised equipment. Supplied as a finished tool body compatible with industry-standard indexable inserts, this cutter integrates easily into existing toolholders and tool management systems, reducing procurement complexity. Contact Metav Werkzeuge for tailored application guidance and to request the Teknik Makina S689TM indexable shank cutter; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S689TM Product type: Shank cutter Brand: Teknik Makina Compatible inserts: LNMU 0303 Compatible insert manufacturer: Tungaloy Core specifications Cutter diameter: 33 mm Shank diameter: 32 mm Overall length: 200 mm Cutting length: 60 mm Number of cutting edges: 5 Weight: 1.112 kg Torx key: T8 Torx screw: M2.5x7 Materials & features Indexable insert system Replaceable cutting inserts Torx screw clamping Label: 33mm Shank cutter LNMU 0303 L200mm FAQ Which inserts are required for this tool? The cutter uses LNMU 0303 indexable inserts; compatible inserts from Tungaloy are recommended for optimal fit and performance. What is the usable cutting length of the tool? The tool provides a 60 mm cutting length on the head, allowing for a balance of reach and rigidity in typical milling operations. What shank size is needed in the toolholder? A toolholder capable of accepting a 32 mm shank is required; the robust shank ensures stable clamping and reduced deflection. How are the inserts fastened and which key is needed? Inserts are secured with M2.5x7 Torx screws and require a T8 Torx key for replacement and torque-controlled servicing. Is the cutter supplied as a ready-to-fit body or with inserts included? The S689TM is supplied as a finished cutter body compatible with LNMU 0303 inserts; inserts are stocked separately and should be selected according to application needs. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
33mm Shell Cutter For 4NKT06 Indexable Inserts, 4 Flutes, 35mm Cutting Length, 32mm Shank - Teknik Makina
Benefit from the combination of stable clamping, a 33 mm cutting diameter and compatibility with 4NKT 0603 indexable inserts for consistent material removal; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Schaftfräser — shank-mounted milling cutter, 33 mm diameter, for 4NKT 0603 indexable inserts — Teknik Makina A Schaftfräser designed as a shank-mounted milling cutter for 4NKT 0603 indexable inserts, intended for secure indexable-insert milling on CNC machines and rigid toolholders 33 mm cutting diameter for high material removal 32 mm shank for rigid toolholder clamping Four cutting edges for efficient chip removal Compatible with Taegutec 4NKT 0603 inserts Enhanced stability for consistent machining results The shank-mounted design delivers stable clamping and reduced run-out, helping to maintain consistent cut quality over long tool engagements. With a 32 mm shank and a 220 mm overall length, the tool balances reach and rigidity to minimise vibration and support repeatable geometry in batch production. This combination is particularly beneficial where hold tolerances affect downstream assembly or finishing operations, as the improved stability directly reduces rework and scrap rates. Efficient cutting thanks to four-edged insert geometry Equipped for four cutting edges and a 33 mm diameter, the cutter achieves effective chip evacuation and steady material removal. The generous 35 mm cutting length allows for both peripheral milling and light face cuts, enabling a straightforward transition between roughing and semi-finishing passes. Using indexable inserts means predictable wear behaviour; inserts can be rotated or replaced without removing the holder, which reduces downtime and keeps spindle utilisation high. Practical fastening and service features that save time The insert is secured with an M3x6.5 Torx screw and requires a T8 key for servicing, allowing quick, reproducible clamp torque during insert changes. Compatibility with established insert formats — notably the 4NKT06 / 4NKT 0603 series — makes stocking spares and replacements simpler. The cutter’s solid construction and the option to source inserts from Taegutec support routine maintenance strategies and consistent cutting performance across shifts. Seamless integration into production workflows The cutter is supplied as a ready-to-fit shank-mounted solution that suits CNC milling centres and heavy-duty toolholders where a robust connection is essential. Weighing approximately 1.462 kg, the unit offers the mass needed for stable cutting without compromising tool-change speed on automated systems. The design supports predictable machining windows and can be combined with standard coolant and fixture setups to maintain cycle-time targets and consistent surface finish. Contact Metav Werkzeuge for tailored technical advice or to discuss application suitability of the Teknik Cutting Tools S477-1TM shank-mounted milling cutter; reach our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: S477-1TM Manufacturer: Teknik Makina Product name: Shank-mounted milling cutter for 4NKT 0603 indexable inserts Key measurements Cutting diameter: 33 mm Shank diameter: 32 mm Cutting length: 35 mm Number of cutting edges: 4 Overall length: 220 mm Weight: 1.462 kg Compatibility & fastening Compatible inserts: 4NKT06 / 4NKT 0603 Suitable insert manufacturer: Taegutec Fixing screw: M3x6.5 Torx Torx key size: T8 FAQ Which indexable inserts fit this cutter? The cutter accepts 4NKT 0603 type inserts (often referenced as 4NKT06); insert changes follow standard indexable-insert procedures for this format. What are the main dimensions of the S477-1TM? Key dimensions for the S477-1TM include a 33 mm cutting diameter, a 32 mm shank and a 220 mm overall length; cutting length is 35 mm. How are the inserts secured? Inserts are fastened with an M3x6.5 Torx screw; a T8 Torx key is used for tightening and removal to ensure repeatable clamping. Is the cutter compatible with Taegutec inserts? Yes, the S477-1TM is compatible with inserts from Taegutec specified in the 4NKT 0603 series. What machining roles is this cutter intended for? The cutter is intended for indexable-insert milling operations on CNC machines where a rigid shank and reproducible insert changes improve productivity and part consistency. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
33mm Solid Carbide End Mill for 4NKT 0603 Indexable Inserts, 35mm Cutting Length, 32mm Shank Diameter - Teknik Makina
Take advantage of the combination of robust shank stability, precise insert compatibility and a service-friendly clamping system for dependable cycle times and consistent surface finish. Order the S477TM directly via Metav Werkzeuge or consult the technical team for application-specific advice. Schaftfräser S477TM – indexable insert cutter by Teknik Makina, 33 mm cutting diameter The Schaftfräser S477TM is a precision shank cutter designed for milling operations with indexable inserts, optimised for medium to heavy material engagement and versatile across workshop and light production environments. 33 mm cutting diameter for robust performance 32 mm solid shank for stable clamping Compatible with 4NKT 0603 indexable inserts 35 mm cutting length, four cutting edges Consistent machining through proven insert compatibility Designed around the 4NKT 0603 system, this cutter accepts standard indexable inserts from recognised manufacturers such as Taegutec, which reduces setup complexity and keeps tooling inventories compact. The use of indexable inserts means worn cutting edges are replaced rather than the whole tool, delivering a lower cost per cutting edge and shorter downtime compared with brazed or solid tools. The combination of a defined insert pocket and secure fixing provides predictable cutting geometry, which supports consistent cycle times and a repeatable surface finish. Stable clamping and concentricity for accurate results A 32 mm solid shank ensures firm seating in the spindle or holder, improving concentricity and reducing runout during rotation. Reduced radial runout directly benefits tool life and surface quality, especially when engaging higher material removal rates. The tool’s 33 mm diameter and four cutting edges are balanced to deliver even cutting forces, so the cutter remains stable through plunge and peripheral milling passes. This stability translates into fewer rejects and less rework in serial production. Quick insert changes and secure fixing for continuous operation Maintenance is simplified by the straightforward clamping concept using an M3x6.5 Torx screw and T8 key, enabling fast, repeatable insert replacement without specialised equipment. The 35 mm cutting length offers sufficient engagement for step-down strategies while keeping insert protrusion minimal, which helps maintain rigidity. The robust construction and accessible fixing also reduce the risk of improper seating, limiting unplanned stoppages and enhancing overall equipment effectiveness. Suited for workshops and light industrial production With an overall length of 200 mm and a compact profile, this cutter is a practical choice where space and tool change speed matter. The combination of a solid shank and standardised insert interface supports a range of operations from contouring to face milling. For operations prioritising uptime and repeatability, the S477TM delivers a pragmatic balance between performance and maintainability, making it a logical addition to setups that already use 4NKT-series inserts. Contact Metav Werkzeuge in Emmerich for tailored application guidance and to discuss how the S477TM fits into current machining processes; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: S477TM Manufacturer: Teknik Makina Designation: Shank cutter for 4NKT 0603 indexable inserts Core data Cutting diameter: 33 mm Shank diameter: 32 mm Cutting length: 35 mm Overall length: 200 mm Number of cutting edges: 4 Weight: 1.327 kg Special features Compatible inserts: 4NKT 0603 Suitable insert manufacturer: Taegutec Torx screw: M3x6.5 Torx key size: T8 SKU: S477TM FAQ Which insert type fits this cutter? The cutter accepts 4NKT 0603 indexable inserts; inserts from Taegutec in this format are compatible with the S477TM. How is the insert secured in the cutter? Insert fixation is accomplished with an M3x6.5 Torx screw requiring a T8 key, providing a secure and repeatable clamping interface for the S477TM. What clamping diameter is required for stable operation? A 32 mm solid shank gives high clamping stability; the S477TM is intended for holders or spindles that accommodate a 32 mm shank for optimal concentricity. Is the cutter suitable for heavy material removal? The combination of a 33 mm cutting diameter and four cutting edges makes this cutter appropriate for medium to heavy engagement, depending on the machine power and cutting parameters used with the S477TM. What benefit do indexable inserts provide compared with solid tools? Indexable inserts reduce tool replacement time and cost per cutting edge; the S477TM’s design leverages these advantages for improved uptime and predictable tool costs. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
33mm Solid Carbide End Mill For WNMX 09T3 Indexable Inserts 150mm With Internal Coolant - Teknik Makina
Deliver consistent performance by combining a 33 mm cutting diameter, internal coolant and compatibility with WNMX 09T3 indexable inserts for reliable, economical milling. Benefit from a robust shank design and a 70 mm cutting length that supports steady material removal; order directly via Metav Werkzeuge or request application advice from our consultants. Shank milling cutter for WNMX 09T3 indexable inserts — 33 mm, internal coolant (Teknik Makina) A shank-mounted milling cutter designed for insert-based milling where coolant-through capability and precise shank stability are required 33 mm cutting diameter Internal coolant supply Compatible with Korloy WNMX 09T3 Shank Ø 32 mm for rigid clamping Three cutting edges for stable cutting Faster, more predictable material removal for continuous production The tool is engineered to provide steady material removal with its 33 mm diameter and a cutting length of 70 mm. The shank design with a 32 mm diameter reduces runout when clamped in standard toolholders, which in turn supports repeatable tolerances and consistent surface finishes. Where cycle time and process reliability are critical, the cutter’s three cutting edges balance cutting force and chip load, enabling efficient removal rates without resorting to aggressive feeds that would shorten tool life. These characteristics make the cutter a pragmatic choice for workshops seeking measurable productivity gains. Coolant-through design that protects edges and improves tool life Equipped with internal coolant, the cutter delivers coolant directly to the cutting zone, improving chip evacuation and thermal control. This targeted supply reduces edge temperatures and helps maintain cutting geometry for longer periods; the result is fewer insert changes and more uptime. For operations sensitive to heat or where chip control affects surface quality, the coolant-through feature is a functional advantage that both prevents built-up edge and supports consistent part quality. The mechanism is compatible with standard pressurised coolant systems and is integrated to avoid compromising the shank’s rigidity. Straightforward compatibility and service for workshop workflows Compatibility with WNMX 09T3 indexable inserts — fitted to accepted industry standards — simplifies tooling logistics and reduces the need for specialised inventories. The cutter accepts Korloy-manufactured inserts and is secured with a Torx screw (M3x7) tightened with a T8 key, which keeps changeover quick and reproducible. Routine maintenance is kept simple: replace worn inserts and check the Torx screw torque; the robust shank profile is designed to remain stable through many insert changes. The product is supplied as a ready-to-mount unit, identified as S806-1TM, and is intended for operations where indexable-insert systems are already part of the production setup. For application-specific advice or to purchase this Teknik Makina shank milling cutter via Metav Werkzeuge, contact our technical team for tailored recommendations and delivery options. Technical data Article number: S806-1TM Product type: Shank milling cutter Manufacturer: Teknik Makina Compatible inserts: WNMX 09T3 Suitable insert manufacturer: Korloy Facts Cutting diameter: 33 mm Overall length: 150 mm Shank diameter: 32 mm Cutting length: 70 mm Weight: 0.854 kg Number of cutting edges: 3 Torx key: T8 Torx screw: M3x7 Special features Internal coolant supply Indexable-insert system (WNMX 09T3) Shank-mounted design for rigid clamping Three cutting edges for balanced cutting FAQ Which insert type fits this cutter? The Teknik Makina shank milling cutter accepts WNMX 09T3 indexable inserts; Korloy-manufactured inserts are explicitly listed as compatible and are commonly used with this tool. Is coolant-through capability included? Yes — the cutter is equipped with internal coolant, which delivers coolant directly to the cutting zone to aid chip evacuation and reduce cutting temperatures. What are the critical dimensions for holder selection? Refer to the shank diameter (32 mm) and overall length (150 mm); these dimensions determine compatible toolholders and clamping systems for stable operation. How are inserts secured and changed? Inserts are fixed with a Torx screw (M3x7); the appropriate Torx key is T8. The system is designed for quick, repeatable insert changes while maintaining secure clamping. What is the article number for ordering and reference? Order or reference the cutter using SKU S806-1TM (Teknik Makina shank milling cutter for WNMX 09T3). Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Cutter For ADKT 1505 Indexable Inserts 3 Flutes 45mm Cutting Length 120mm Overall Length - Teknik Makina
Take advantage of a precision shank milling cutter that combines compatibility with ADKT 1505 indexable inserts, a 35 mm cutting diameter and a robust 25 mm shank for stable toolholding — order directly via Metav Werkzeuge or contact the consultants for specification support. S308TM Shank milling cutter — 35 mm diameter, for ADKT 1505 indexable inserts (Teknik Makina) S308TM is a shank milling cutter designed for high-efficiency indexable-insert milling in CNC applications, compatible with ADKT 1505 inserts for consistent chip formation and quick insert changes. For ADKT 1505 indexable inserts (ISCAR compatible) 35 mm cutter diameter 25 mm shank diameter, 120 mm overall length Precision insert compatibility for repeatable results The indexable inserts concept enables rapid tool changes and consistent edge geometry across production runs. Matched to ADKT 1505 inserts and compatible with ISCAR systems, this milling tool supports predictable cutting behaviour and reduced setup time. The modular insert design separates the cutting edge from the tool body, lowering ongoing tooling costs and simplifying maintenance without sacrificing repeatability. Stable shank and optimised geometry for higher material removal With a 25 mm shank and 120 mm overall length, the cutter offers rigid clamping and controlled overhang, improving stability during aggressive passes. The three cutting edges and a 35 mm diameter provide balanced chip distribution and smoother radial engagement, which together reduce vibration and extend insert life. The tool is supplied with a Torx M4x10 screw and requires a T15 key for secure insert fastening, ensuring reliable clamping torque and secure seat location. Practical benefits on the machine and in process planning The tool geometry is tuned for efficient chip evacuation and predictable surface finish, making it suitable for a range of milling tasks on medium-duty CNC machines. Operators benefit from shorter tool-change cycles and consistent surface quality, while process planners gain the ability to rely on standardised insert types for easier inventory and cost control. The lightweight construction (approx. 0.5 kg) keeps spindle loads moderate, supporting longer cycle times without unnecessary mechanical strain. Suitable applications and productivity gains Ideal for batch production and job-shop environments that favour insert-based tooling, this cutter supports fast indexable-insert swaps and repeatable part quality. The combination of a rigid shank, defined cutting length and standardised insert compatibility helps reduce downtime and improves throughput on milling operations where changeover speed and consistent results matter most. Specification-driven buyers will appreciate the clear mechanical data and the compatibility with established insert systems. For a production-ready milling solution from Teknik Makina, request the S308TM specification sheet or technical advice from Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application fit and supply options. Technical data Article number: S308TM Manufacturer: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Facts Diameter: 35 mm Cutting edges: 3 Shank diameter: 25 mm Cutting length (shank): 45 mm Overall length: 120 mm Weight: 0.5 kg Special features For ADKT 1505 indexable inserts Compatible with ISCAR inserts Torx screw M4x10, Torx key T15 SKU: S308TM FAQ What insert type is required for this cutter? The cutter uses ADKT 1505 indexable inserts; it is compatible with ISCAR-style inserts designed for that seat form. Can the tool be used on standard CNC milling spindles? Yes, the shank design and 25 mm diameter make the tool suitable for common milling spindle holders that accept a 25 mm straight shank. How many cutting edges does the milling cutter have and what is the benefit? The tool has three cutting edges, which improves chip balance and permits smoother cutting engagement compared with fewer-edge variants. Is the cutter supplied with fastening hardware? The S308TM is supplied with a Torx M4x10 screw specification and requires a T15 key for insert clamping. What applications benefit most from this cutter? Batch milling, slotting and light face milling operations where fast insert changes, predictable surface finish and indexable-insert economics are priorities will benefit most. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Cutter For AP-- 1604 Indexable Inserts Internal Coolant, 3 Flutes - Teknik Makina
Take advantage of the combination of internal coolant, a 35 mm cutting diameter, and secure Torx fastening for consistent, high-efficiency milling — order directly via Metav Werkzeuge or consult our specialists for integration advice. Shank Cutter S262-1TM — 35 mm, internal coolant, for AP--1604 indexable inserts (Teknik Makina) A Shank Cutter S262-1TM engineered for reliable indexable-insert milling in versatile production environments, optimised for cooling and secure insert clamping. 35 mm cutting diameter Internal coolant through shank Compatible with Korloy AP--1604 inserts Shank diameter 25 mm, 120 mm overall length Precision cooling for sustained cutting performance Equipped with internal coolant, this shank cutter maintains stable cutting temperatures across longer cycles, reducing thermal distortion and extending insert life. The integrated cooling channel supports efficient chip evacuation and coolant delivery directly to the cutting zone, which improves process reliability and enables consistent dimensional results. Combined with the Korloy AP--1604 insert system, the tool is set up for repeatable performance in repetitive production runs. Robust clamping and balanced shank design for steady cuts A shank diameter of 25 mm and a compact mass of 0.498 kg deliver mechanical stiffness and reduced vibration during machining, which contributes to improved surface finish and tool life. The head secures inserts with an M4x10 Torx screw (Torx key T15) for straightforward servicing and reliable seating. The cutter’s three cutting edges provide a balance between material removal rate and smooth cutting action, making it suitable for routines that demand predictable cyclical output. Compact dimensions for straightforward integration into toolsets With a 120 mm overall length and a 45 mm cutting length, this cutter is designed to fit common toolholder setups without unnecessary overhang, improving rigidity and minimising deflection. The combination of compact geometry and indexable inserts helps workshops reduce downtime: replacement involves only the insert and screw rather than the whole cutter body. The configuration supports a practical, modular approach to tooling that aligns with standard set-ups in modern milling cells. Contact Metav Werkzeuge for a machining consultation and reserve the Teknik Makina S262-1TM to benefit from optimised cooling and secure AP--1604 insert clamping Technical data Article number: S262-1TM Product type: Schaftfräser Eclass: 21180806 Manufacturer: Teknik Makina Facts Cutting diameter: 35 mm Shank diameter: 25 mm Overall length: 120 mm Cutting length (shank): 45 mm Weight: 0.498 kg Number of cutting edges: 3 Torx key: T15 Torx screw: M4x10 Internal coolant: yes Special features Compatible with AP--1604 indexable inserts Insert manufacturer: Korloy Designed for indexable-insert milling Label: 35mm Schaftfräser AP-- 1604 L120mm mit Innenkühlung FAQ Which inserts fit this cutter? The cutter accepts AP--1604 indexable inserts; it is delivered as the Shank Cutter S262-1TM configured for Korloy AP--1604 inserts. Is there through-shank cooling? Yes, the S262-1TM features internal coolant to direct fluid to the cutting edge for improved temperature control. What is the shank diameter and overall length? The tool has a 25 mm shank diameter and an overall length of 120 mm, suitable for many standard toolholders. How many cutting edges does the cutter have and how are inserts fastened? The cutter uses three cutting edges and secures inserts with an M4x10 Torx screw, tightened using a T15 Torx key. Is the tool suitable for repetitive production runs? The combination of internal coolant, indexed insert system and robust shank makes the S262-1TM well suited to repetitive machining tasks that require consistent results. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Cutter For APKT 1604 Indexable Inserts 65mm Cutting Length, 3 Flutes, 32mm Shank - Teknik Makina
Take advantage of the combination of precise geometry and straightforward insert compatibility for dependable milling results; the robust shank and 65 mm cutting length deliver stability in long-cycle work. Order the S438TM directly via Metav Werkzeuge or consult the specialists for application advice. S438TM Shank milling cutter for APKT 1604 indexable inserts, Ø35 mm, 3 cutting edges — Teknik Makina A practical S438TM shank milling cutter designed for indexable-insert milling with APKT 1604 inserts, intended for industrial and workshop CNC operations that require predictable, repeatable cutting performance Ø35 mm cutting diameter for wider material removal Compatible with APKT 1604 inserts by Korloy 3 cutting edges for stable, efficient milling High, consistent material removal with controlled geometry The tool body offers a Ø35 mm cutting diameter paired with a 65 mm cutting length, creating a balance between reach and rigidity that supports steady material removal. A 90° cutting angle produces largely perpendicular faces, which is beneficial where dimensional control of the machined surface is required. The three-edge configuration delivers fewer interruptions per revolution than multi-edge designs, helping to maintain consistent cutting forces and reducing chatter during interrupted cuts. These design elements combine to provide predictable cycle times in series production. Quick insert changes and secure clamping to reduce downtime Designed for use with APKT 1604 indexable inserts, the cutter accepts standard inserts from Korloy, enabling rapid replacement without lengthy regrinds. The clamping is effected via an M4x10 Torx screw engaged with a T15 key, a common fastener standard that simplifies maintenance procedures and minimises tool-change time. Indexable inserts remove the need to resharpen tools on site; worn cutting edges are replaced quickly, restoring full cutting geometry and maintaining process capability with minimal interruption. Robust shank dimensions and overall balance for reliable toolholding A 32 mm shank diameter and 250 mm overall length are chosen to provide reliable mounting in standard toolholders while offering sufficient reach for many milling tasks; the cutter weight of 1.567 kg reflects a solid construction that aids stability. The shank design focuses on secure clamping to reduce axial and radial runout, which supports repeatable positioning and contributes to consistent surface finish and tool life. The combination of shaft stiffness and cutter geometry suits a broad range of industrial milling setups where repeatability and machine time utilisation are priorities. Contact Metav Werkzeuge today for tailored application guidance on the S438TM shank milling cutter and to check current availability; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: S438TM Manufacturer: Teknik Makina Product type: Shank milling cutter for APKT 1604 indexable inserts Bezeichnung (English): for APKT 1604 Indexable Inserts Facts Cutting diameter: 35 mm Shank diameter: 32 mm Cutting length: 65 mm Overall length: 250 mm Cutting edges: 3 Cutting angle: 90° Weight: 1.567 kg Torx screw: M4x10 Torx key: T15 Special features Compatible inserts: APKT 1604 Compatible insert manufacturer: Korloy Indexable-insert system for quick edge replacement Robust shank for standard toolholders FAQ What inserts fit this cutter? The cutter accepts APKT 1604 indexable inserts; inserts from Korloy are specified as compatible with the S438TM. How is the insert secured? Inserts are clamped with an M4x10 Torx screw; a T15 key is used to tighten and loosen the screw for maintenance. What is the effective cutting length? The tool offers a 65 mm cutting length, enabling deeper axial engagement when required while maintaining rigidity. Which shank size is required for toolholding? A toolholder compatible with a 32 mm shank diameter is required to mount the cutter securely. Is the cutter suitable for quick changeover in production? Yes, the indexable-insert concept combined with the standard Torx clamping enables rapid insert changes and short downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Cutter For APXT 1003 Indexable Inserts 4 Flutes 30mm Cutting Length 25mm Shank Diameter 100mm Overall Length, 90° Cutting Angle - Teknik Makina
Combine rapid material removal with secure clamping and straightforward insert replacement to keep production running reliably; benefit from a compact tool body and proven indexable-insert compatibility. Order the S154TM directly via Metav Werkzeuge or consult the technical team for machining advice. Shaft milling cutter S154TM — 35 mm, 4‑cut, for APXT 1003 indexable inserts (Teknik Makina) The Shaft milling cutter S154TM is an indexable insert cutter designed for robust side and face milling tasks where quick insert changes and repeatable results are required 35 mm cutting diameter 4 cutting edges for fast material removal Compatible with APXT 1003 inserts (Korloy) Ø25 mm shank, 30 mm cutting length Increased productivity from a compact indexable solution The S154TM is built to deliver efficient chip removal and sustained cutting performance. With a 35 mm diameter and 4 flutes, the tool reduces machining passes while maintaining stability at typical milling feeds. The 90° cutting angle gives a neutral cutting action suitable for facing and shoulder operations, which helps to shorten cycle times on batch and CNC production runs. Because the cutter accepts APXT 1003 indexable inserts, insert geometry and grade can be selected to match the workpiece material, enabling consistent surface quality while lowering per-part tooling costs. Secure clamping and repeatability for consistent part quality A stout Ø25 mm shank and a 30 mm cutting length create a stable connection between spindle and cutter body, which supports repeatable results across runs. Insert retention is managed with a M2.5×5.5 Torx screw tightened with a T8 key, providing reliable clamping and simple replacement during tool changes. The assembly weight of 0.452 kg and compact overall length of 100 mm mean the cutter integrates easily into standard tool magazines and holders while limiting overhang-related vibration. These characteristics translate into fewer rejects and less time spent on rework. Simplified workshop logistics and lower downtime Compatibility with Korloy APXT 1003 inserts streamlines inventory: a single insert family covers multiple operations when paired with this cutter body, reducing storage complexity. The indexable system permits quick on-machine insert swaps, minimising downtime and making scheduled maintenance predictable. For procurement and supply, Metav Werkzeuge provides centralised availability and a clear quality filter from Emmerich, supporting continuous supply for workshops and industrial customers alike. Technical advisors can be consulted for matching insert grades to specific machining tasks and to plan replacement cycles that keep production steady. Contact Metav Werkzeuge for tailored tooling recommendations and prompt supply from Emmerich—technical consultants are available to assist with insert selection and integration into production workflows Technical data SKU: S154TM Brand: Teknik Makina Compatible inserts: APXT 1003 Compatible insert manufacturer: Korloy Torx screw: M2,5x5,5 Torx key: T8 Facts Diameter: 35 mm Cutting edges: 4 Overall length: 100 mm Shank diameter: Ø25 mm Cutting length: 30 mm Weight: 0.452 kg Cutting angle: 90° Special features Indexable insert cutter body Secure Torx retention system Compact tool length for reduced overhang Designed for APXT 1003 insert range FAQ Which inserts fit this cutter? The S154TM accepts APXT 1003 indexable inserts; compatibility with Korloy inserts is specified for straightforward procurement and grade selection. What clamping hardware is required to change an insert? Insert clamping on the S154TM is performed with the supplied M2.5×5.5 Torx screw using a T8 key for secure and repeatable retention. Is the cutter suitable for standard milling spindles? Yes, the Ø25 mm shank of the S154TM matches common collet and shrink-fit holders; confirmation should be made against the machine’s tool holder spec. How can material suitability be determined? Material compatibility depends on the chosen APXT 1003 insert grade; the S154TM body is designed to work with insert grades optimised for a range of steels and non-ferrous materials as selected by the tooling advisor. What are the main benefits of choosing this indexable system? The S154TM offers rapid insert changes, reduced tooling inventory when using APXT 1003 inserts, and consistent part quality thanks to stable shank design and secure Torx clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Cutter Head For RDMT 12T3 Indexable Inserts 3 Flutes 45mm Cutting Length 200mm Overall Length - Teknik Makina
Take advantage of a robust, indexable solution that combines precise clamp security and efficient stock removal — ideal for medium-duty milling operations. Benefit from the 35 mm cutting diameter and secure Torx fastening for predictable tool life; order the cutter directly via Metav Werkzeuge or ask our consultants for application advice. Shank-mounted cutter for RDMT 12T3 indexable inserts — 35 mm diameter, 3 cutting edges (Teknik Makina) A shank-mounted cutter engineered to hold RDMT 12T3 indexable inserts for face and shoulder milling in general workshop and light industrial environments. 35 mm cutting diameter Shank diameter 32 mm Three cutting edges for efficient stock removal Torx T15 fastening, M3.5 locking screw Faster machining with fewer interruptions The R248TM is configured for quick insert indexing and consistent material removal: its 35 mm cutting diameter combined with three cutting edges means fewer passes and a steady cut for many common milling tasks. Using indexable inserts such as RDMT 12T3 reduces downtime compared with brazed cutters because inserts can be rotated or replaced without regrinding. The result is a measurable gain in throughput and a simpler consumable management routine, helping to keep cycle times predictable in small-batch and series production. Rigid clamping for stable cuts and repeatable results Rigidity starts at the shank: the 32 mm shank diameter provides a solid connection to standard toolholders while the M3.5 locking screw and M3.5 x 8.5 Torx screw ensure repeatable, low-play insert clamping. The Torx key T15 allows controlled torque during assembly, reducing the risk of insert movement under load. Together these design choices support a steady cutting geometry, which helps maintain surface quality and reduces vibration-related wear on both tool and machine. Practical design for workshop handling and setup With an overall length of 200 mm and a cutting length of 45 mm, this shank-mounted tool balances reach and stiffness for typical through-cutter and shoulder operations. The cutter’s mass of 1.226 kg gives a feel of robust construction without unnecessary bulk, and the modular insert system simplifies inventory: keep a small stock of RDMT 12T3 inserts and several spare screws to keep the tool in service. The assembly is straightforward and suited to routine workshop maintenance, enabling fast reconditioning between jobs. Order the Teknik Makina shank-mounted cutter (R248TM) via Metav Werkzeuge for dependable supply and clear technical advice — email info@metav-werkzeuge.com or call +49 2822 7131930 for product details and compatibility checks Technical data Article number: R248TM Product: Shank-mounted cutter for RDMT 12T3 indexable inserts Brand: Teknik Makina Facts Cutting diameter: 35 mm Shank diameter: 32 mm Cutting length: 45 mm Overall length: 200 mm Number of cutting edges: 3 Weight: 1.226 kg Special features Suitable for RDMT 12T3 indexable inserts Locking screw: M3.5 Torx screw: M3.5 x 8.5 Torx key size: T15 ECLASS: 21180806 ETIM: EC011860 FAQ Which inserts fit this cutter? The cutter accepts RDMT 12T3 indexable inserts; R248TM is intended as a holder for that insert format. What are the key dimensions to check for toolholder compatibility? Relevant dimensions are the 32 mm shank diameter, 35 mm cutting diameter and 200 mm overall length for the R248TM head. How is the insert secured in the cutter? Insert retention uses a locking screw (M3.5) and a Torx screw M3.5 x 8.5; the specified key size is T15. Is the cutter suitable for face and shoulder milling? Yes — the combination of a 35 mm diameter and three cutting edges makes the tool appropriate for face and shoulder milling tasks when fitted with RDMT 12T3 inserts. What should be kept in stock to minimise downtime? Keep spare RDMT 12T3 inserts and replacement fastening screws (M3.5 / M3.5 x 8.5) on hand to allow rapid insert changes. Manufacturer: Teknik Cutting Tools; Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Cutter Holder for APKT 1604 Indexable Inserts 3-Flute, 32mm Shank Diameter - Teknik Makina
Efficient material removal and consistent stability: the S448TM combines a Ø35 mm cutting diameter with a rigid 32 mm shank and a 65 mm cutting length for reliable deep milling. Benefit from fast insert changes and reduced downtime by using APKT 1604 indexable inserts. Order the tool directly via Metav Werkzeuge or consult our specialists for machining advice. S448TM — Indexable shank cutter for APKT 1604 inserts, Ø35 mm, 3 flutes (Teknik Makina) A robust S448TM shank cutter engineered for secure clamping of APKT 1604 indexable inserts, ideal for heavy-duty milling and general-purpose metal removal. Ø35 mm cutting diameter, 3 cutting edges 32 mm shank for high rigidity 65 mm cutting length for deep cuts Compatible with APKT 1604 inserts (Korloy) Stable cutting for consistent process performance The main advantage of this shank cutter is its combination of a 32 mm shank and a Ø35 mm cutting diameter, which together increase rigidity and reduce vibration during machining. Reduced chatter results in a smoother surface finish and longer insert life, making the tool suitable for continuous production runs. The cutter’s three-flute geometry balances shear efficiency and chip evacuation, enabling steady metal removal rates without compromising tool life. Faster cycles thanks to an indexable insert system Using APKT 1604 indexable inserts with the S448TM allows rapid insert changes and consistent cutting geometry across inserts. The clamping system is secured with an M4x10 Torx screw tightened using a T15 key, ensuring repeatable seat positioning and safe fixation. This arrangement lowers machine downtime compared with solid-carbide alternatives, while indexable inserts cut operating costs through economical replacement of only the cutting edges rather than the whole tool body. Designed for reliable handling and straightforward maintenance With a 65 mm cutting length and a total length of 300 mm, the tool offers reach for deeper pockets and shoulder milling while keeping a compact overall profile for stable clamping. The 90° cutting angle is optimised for general milling tasks, providing predictable axial forces and straightforward programming. The cutter’s net weight (approx. 1.879 kg) reflects a robust construction that supports precision in heavy cuts and contributes to a controlled process window. For tailored machining solutions with Teknik Makina tools, contact Metav Werkzeuge in Emmerich to discuss application-matched tooling and availability: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: S448TM Manufacturer: Teknik Makina Numbers / Core technical data Diameter: 35 mm Shank diameter: 32 mm Cutting length: 65 mm Total length: 300 mm Cutting edges: 3 Weight: 1.879 kg Cutting angle: 90° Designs / Special features For APKT 1604 indexable inserts Compatible insert manufacturer: Korloy Torx screw M4x10 Torx key size: T15 FAQ Which insert type fits this cutter? The cutter accepts APKT 1604 indexable inserts; the S448TM is specified for this insert format for secure seating and correct geometry. Is the S448TM compatible with Korloy inserts? Yes, the S448TM is compatible with Korloy APKT 1604 inserts as stated in the product data. What fastening hardware is used for insert clamping? Insert clamping on the S448TM is performed using an M4x10 Torx screw and a T15 Torx key for repeatable fixation. What machining tasks suit this shank cutter? The cutter is optimised for general milling operations requiring rigidity and reach—shoulder milling and deeper pocket work are typical applications for this design. How does the cutter support production efficiency? By using indexable inserts and a robust 32 mm shank, the tool reduces downtime for tool changes and provides stable cutting conditions that extend insert life. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm End Mill for AP-- 1604 Indexable Inserts With Internal Coolant, 150mm L - Teknik Makina
Take advantage of a compact 35 mm diameter cutter with internal coolant and a rigid 32 mm shank for stable, repeatable milling cycles; order the tool directly via Metav Werkzeuge or consult our specialists for application planning. Shaft Cutter S272-1TM – indexable-insert milling cutter with internal coolant by Teknik Makina The Shaft Cutter S272-1TM is an indexable-insert milling cutter designed for precision milling with AP--1604 inserts, combining compact diameter and internal coolant for controlled metal removal in CNC and shop-floor operations. *35 mm cutter diameter for compact toolpaths *Internal coolant for improved chip evacuation *Compatible with AP--1604 indexable inserts by Korloy *32 mm shank with 3 cutting edges, robust design Consistent performance for precision milling The S272-1TM is engineered to deliver stable machining thanks to its 35 mm diameter and 32 mm shank, which reduce deflection during interrupted cuts. Using standard AP--1604 indexable inserts ensures quick edge changes and predictable surface finishes, while the compact geometry supports tight toolpaths on multi-axis machines. This configuration translates into shorter cycle times and fewer tool changes, improving production throughput without sacrificing dimensional control. Effective cooling and better surface quality Built-in internal coolant channels direct lubricant to the cutting zone, aiding heat dissipation and efficient chip evacuation. The result is reduced insert wear and a more consistent cutting edge life, which lowers unplanned downtime and rework. For operations where thermal stability affects tolerances, the focused coolant flow helps maintain target surface integrity and repeatability across batches. Robust clamping and straightforward maintenance A 3 cutting edge layout provides balanced cutting forces and smooth engagement, while insert clamping is secured with M4x10 Torx screws using a T15 driver, simplifying maintenance routines. The cutter’s 55 mm cutting length and 150 mm overall length offer a practical reach for many slotting and face-milling tasks, and the 0.915 kg mass contributes to inertial stability during heavy cuts. Quick insert indexing minimises setup time and keeps machine utilisation high. Practical advantages across workshops and production lines This indexable-insert cutter suits industrial and workshop environments requiring dependable repeatability and easy servicing. Its compatibility with Korloy AP--1604 inserts makes sourcing straightforward, and the tool’s design supports consistent results in jobbing and medium-series production. Combined with Metav’s supply and advisory capability, the tool is positioned to integrate into existing toolbanks with minimal adaptation. For tailored application advice or to secure a supply of the S272-1TM, contact Metav Werkzeuge for ordering and technical consultation directly through their advisory team Technical data Article number: S272-1TM Product: Indexable-insert milling cutter Compatible inserts: AP--1604 Manufacturer: Teknik Makina Facts Diameter: 35 mm Overall length: 150 mm Cutting length: 55 mm Shank diameter: 32 mm Number of cutting edges: 3 Weight: 0.915 kg Special features Internal coolant Compatible with Korloy AP--1604 inserts Torx screw M4x10 Torx key T15 Eclass: 21180806 FAQ Which indexable inserts fit this cutter? The cutter is designed for AP--1604 indexable inserts; compatibility with Korloy AP--1604 grades is specified for the S272-1TM. Does the tool provide internal coolant? Yes, the S272-1TM features internal coolant channels to deliver fluid directly to the cutting zone for improved chip control and tool life. How many cutting edges does the cutter have? The S272-1TM is equipped with three cutting edges, offering balanced cutting forces and smooth engagement. What screw and driver are used for insert clamping? Insert clamping uses M4x10 Torx screws tightened with a T15 driver on the S272-1TM. What are the key dimensions to consider for toolholding? Important dimensions are a 32 mm shank diameter, 35 mm cutter diameter and a 150 mm overall length for the S272-1TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Shank Cutter For APKT 1604 Indexable Inserts 3 Flutes 55mm Cutting Length, 150mm Overall Length - Teknik Makina
Take advantage of a rigid, indexable solution that combines precise insert compatibility, a robust 32 mm shank and a Ø 35 mm cutting diameter for predictable machining results; order the S272TM directly via Metav Werkzeuge or ask the consultants if specification advice is required. S272TM Shank milling cutter for APKT 1604 indexable inserts — Ø 35 mm, 3-flute (Teknik Makina) S272TM is a shank milling cutter designed for indexable inserts and general metalworking, ideal where repeatable geometry and fast insert changes are essential. For APKT 1604 indexable inserts Ø 35 mm cutting diameter Three cutting edges for stable cutting Solid 32 mm shank for high rigidity High rigidity and consistent chip removal for stable production The S272TM is built around a Ø 35 mm cutting head and a 32 mm shank, offering a stiff connection between toolholder and cutting zone; this reduces deflection and improves dimensional consistency across batches. With a 90° cutting angle and three cutting edges, the cutter delivers predictable chip formation and surface finish while keeping cutting forces balanced. The robust shank diameter supports higher radial forces, which is particularly useful when slotting or shoulder milling is required. These design choices contribute to lower scrap rates and more consistent cycle times on the shop floor. Quick insert changes and straightforward clamping to cut downtime The indexable design accepts APKT 1604 inserts and is compatible with Korloy plate types, enabling operators to replace worn edges quickly instead of regrinding. Insert clamping uses an M4x10 Torx screw with a T15 key, a common configuration that simplifies maintenance routines and reduces tool-change time. The cutter’s 55 mm cutting length and 150 mm overall length balance reach and rigidity, helping to limit overhang without sacrificing accessibility. Fewer interruptions for tool servicing mean higher effective spindle utilisation and a smoother production flow. Practical dimensions and handling for workshop integration Weighing 0.915 kg, the tool is balanced for standard toolholders while its shank profile supports secure gripping in common collet or chuck systems. The head accepts three cutting edges, which spreads wear and prolongs the effective life of each insert, so replacement intervals are extended compared with single-edge alternatives. The S272TM’s straightforward geometry and indexable setup make it suitable for batch production as well as flexible jobbing environments where rapid turnaround and reproducible outcomes are priorities. Technical documentation and files are available for integration into tool lists and CAM setups. Contact Metav Werkzeuge today for specification checks and to reserve the S272TM for upcoming production runs — Metav Werkzeuge can advise on toolholder compatibility and supply logistics via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: S272TM Manufacturer: Teknik Makina Product designation: Schaftfräser for APKT 1604 Indexable Inserts Brand: Teknik Makina SKU: S272TM Facts Diameter: 35 mm Shank diameter: 32 mm Cutting length: 55 mm Overall length: 150 mm Number of cutting edges: 3 Weight: 0.915 kg Cutting angle: 90° Torx screw: M4x10 Torx key: T15 Special features For APKT 1604 indexable inserts Compatible with Korloy insert types Shank milling cutter design Three-flute geometry for balanced cutting Solid shank for increased rigidity FAQ Which insert type does this cutter accept? The S272TM is specified for APKT 1604 indexable inserts and is designed to secure those plates reliably for machining operations. Is the tool compatible with Korloy inserts? Yes, the cutter is compatible with Korloy-manufactured APKT 1604 inserts as indicated in the product specification. What are the main dimensions and mass of the cutter? Key dimensions are Ø 35 mm diameter, 32 mm shank diameter, 55 mm cutting length and 150 mm overall length; mass is 0.915 kg. How are the inserts fastened? Inserts are fastened with an M4x10 Torx screw that requires a T15 key for secure clamping and safe indexing. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Shank Cutter For APKT 1604 Indexable Inserts 3 Flutes 55mm Cutting Length, 90° - Teknik Makina
Combining a robust Ø35 mm cutting diameter with a shank Ø32 mm and secure Torx clamping, the S282TM delivers stable, repeatable milling and efficient insert changes; order the S282TM directly via Metav Werkzeuge or consult our specialists for application support. S282TM — Indexable milling cutter for APKT 1604 Indexable Inserts, Ø35 mm, shank Ø32 mm (Teknik Makina) The S282TM is an indexable milling cutter designed for reliable material removal with APKT 1604 inserts in production and workshop environments. Insert cutter for APKT 1604 inserts Ø35 mm cutting diameter, 3 cutting edges Shank Ø32 mm, overall length 200 mm Torx M4x10 clamping, key T15 Stable clamping for vibration-free machining The cutter is engineered for a secure hold: the Torx M4x10 clamping screw and matching T15 key create consistent torque and minimise loosening under load. A solid shank Ø32 mm and a balanced body reduce runout and chatter, which leads to improved surface finish and longer tool life. This stability translates into fewer interruptions on the shop floor and a more predictable production rhythm, supporting efficient cycle times in batch and single-part machining. Productive cutting geometry that speeds up operations With a Ø35 mm cutting diameter and three cutting edges, the design focuses on steady chip removal and even tool engagement. The 90° cutting angle gives a robust cutting face for face and shoulder milling operations, while the 55 mm cutting length accommodates deeper passes when required. The insert system (suitable for APKT 1604 inserts, commonly supplied by Korloy) enables rapid insert indexing and replacement, reducing downtime and simplifying inventory management for cutting edges. Built for practical workshop use and easy serviceability A 200 mm overall length combined with a mass of 1.245 kg provides the rigidity needed for repetitive milling tasks without excessive overhang. The indexable concept means a lower total cost of ownership: only the small inserts are consumed rather than the whole cutter body, which supports sustainable consumption and straightforward maintenance. Compatibility with standard insert sizes and a simple Torx clamping routine make the tool well suited to both workshop benches and production lines requiring reliable, repeatable performance. For tailored advice on integrating the S282TM insert cutter from Teknik Cutting Tools into existing tooling setups, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com for application-oriented guidance and supply options Technical Data Article number: S282TM Manufacturer: Teknik Makina Designation: Schaftfräser (for APKT 1604 Indexable Inserts) SKU: S282TM Facts Diameter: 35 mm Shank diameter: 32 mm Cutting length: 55 mm Overall length: 200 mm Number of cutting edges: 3 Cutting angle: 90° Weight: 1.245 kg Torx screw: M4x10 Special features Compatible with APKT 1604 indexable inserts Recommended insert manufacturer: Korloy Torx key size: T15 3 cutting edges for stable engagement FAQ Which inserts fit this cutter? The cutter accepts APKT 1604 indexable inserts; the tool body is specified for that insert size and is commonly paired with Korloy inserts. How is the insert secured in the cutter? Inserts are clamped using a Torx M4x10 screw; tightening is performed with a T15 key to the specified torque for reliable retention. What is the cutter diameter and shank size? The tool features a Ø35 mm cutting diameter with a shank Ø32 mm, providing a balance between rigidity and accessibility. Is the tool suitable for production environments? Yes—the combination of a robust shank, secure Torx clamping and indexable inserts ensures repeatable performance and straightforward insert changes suited to production use. How heavy is the cutter and what is its overall length? The tool weighs 1.245 kg and has a 200 mm overall length, dimensions that support stable milling with moderate overhang. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Shank Cutter For RDMT 1003 Indexable Inserts 3 Flutes, 45mm Cutting Length - Teknik Makina
Take advantage of a compact design that combines stable shank support and indexable insert flexibility for efficient milling cycles; order the tool directly via Metav Werkzeuge or consult the specialists for application advice. Shank milling cutter R206TM — indexable milling cutter with 35 mm diameter Shank milling cutter R206TM designed for medium‑duty milling with RDMT 1003 indexable inserts, suitable for industrial machining and workshop toolrooms. Shank milling cutter »R206TM« by Teknik Makina Compatible with RDMT 1003 indexable inserts 35 mm cutting diameter, 3 cutting edges 32 mm shank for secure toolholding Stable cutting performance for productive milling The tool offers a 35 mm cutting diameter and 3 cutting edges, delivering steady material engagement and predictable chip formation. The combination of the 32 mm shank and a total length of 150 mm provides rigidity at the holder, reducing vibration and improving surface finish in repetitive passes. Using an indexable system with RDMT 1003 inserts allows individual edge changes rather than replacing the complete tool, which supports continuous production and reduces tool changeover time. The overall mass of 0.923 kg contributes to a balanced tool assembly that is straightforward to clamp in common toolholders. Practical maintenance and quick insert handling Insert clamping is governed by a locking screw M3.5 and a Torx screw M3.5x8.5, tightened with a T15 key, which standardises maintenance procedures across the workshop. This clear specification simplifies procurement of spare parts and replacement hardware. The indexable system removes the need for re‑grinding; inserts can be indexed or replaced as they reach wear limits, helping to contain tooling costs and keep machines running. For technical clarifications about fitment or to confirm suitability for a specific holder, Metav Werkzeuge provides direct consultation and additional documentation. Robust design that supports operational reliability Constructed for everyday industrial use, the cutter’s geometry and shank dimensions are selected to balance stiffness and accessibility in the cut. A 45 mm cutting length offers a practical axial reach while keeping the unsupported overhang low, which is beneficial in pocketing and peripheral milling tasks. The modular nature of the indexable system also enables inventory efficiency: a small range of inserts covers multiple cutter sizes and operations, lowering stock complexity. Teknik Makina’s tooling platform is aimed at workshops and production lines that value predictable tool life and straightforward serviceability. For enquiries about Teknik Makina R206TM or to secure compatible inserts and spare screws, contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: R206TM Manufacturer: Teknik Makina Designation: Shank milling cutter (for RDMT 1003 indexable inserts) ECLASS: 21180806 ETIM: EC011860 Dimensions & weight Cutting diameter: 35 mm Shank diameter: 32 mm Cutting length (shank): 45 mm Overall length: 150 mm Number of cutting edges: 3 Weight: 0.923 kg Mounting & special features Compatible inserts: RDMT 1003 Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key size: T15 UID / SKU: R206TM FAQ Which insert type fits this cutter? The cutter is specified for RDMT 1003 indexable inserts; the R206TM is designed around that insert geometry. What are the key dimensions for toolholder selection? Key dimensions are a 32 mm shank diameter and 150 mm overall length, which should be matched to the machine’s toolholder and available projection. How many cutting edges does the cutter have? The tool features 3 cutting edges, offering a compromise between material removal rate and finish quality. Which fasteners are used for insert clamping? Insert clamping uses a locking screw M3.5 and a Torx screw M3.5x8.5; a T15 key is specified for tightening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Shank Cutter for RDMT 1003 Indexable Inserts 3-Flute 45mm Cutting Length 200mm Overall Length - Teknik Makina
Efficient milling with high stability is achieved through the combination of a 35 mm cutting diameter and three cutting edges, supported by a robust 32 mm shank and a 45 mm cutting length; the result is reliable chip evacuation and steady tool life. Order the (shank cutter R216TM) directly via (Metav Werkzeuge) or ask our consultants if needed. Shank cutter R216TM – for RDMT 1003 indexable inserts, 35 mm diameter by Teknik Makina The Shank cutter R216TM is a precision-engineered milling tool designed for use with RDMT 1003 indexable inserts, offering a balanced combination of rigidity and accessibility for medium-duty face and slot milling in production environments. 35 mm cutting diameter for stable cuts Three cutting edges for smooth chip removal 32 mm shank ensures secure clamping Compatible with RDMT 1003 indexable inserts Stable cuts and predictable machining results The cutter’s 35 mm diameter and 32 mm shank deliver a high level of axial and radial stability, which reduces chatter and supports consistent surface finish. Because the design focuses on rigidity, the tool offers improved tolerance control in repetitive machining tasks. The combination of three cutting edges with a 45 mm cutting length helps to distribute loads evenly across the insert seats, which contributes to extended insert life and predictable replacement intervals. These features make the tool well suited to workflows where repeatability and minimal rework are priorities. Fast insert changes and secure clamping reduce downtime Tool changeover is simplified by the standardised clamping hardware: a locking screw M3.5, Torx screw M3.5x8.5 and T15 Torx key interface enable secure, repeatable insert fixation. The result is reduced setup time and lower risk of incorrect seating. The robust fastening system supports reliable torque application during maintenance, meaning insert replacement is straightforward and can be completed with common workshop tools. This contributes directly to higher machine uptime and more efficient shift planning. Performance characteristics that support production throughput With a 45 mm cutting length and an overall length of 200 mm, the tool provides an effective reach for a range of face and shoulder milling tasks while keeping deflection minimal. The cutter’s geometry has been optimised to maintain steady chip flow from the cutting zone to the periphery, which assists in heat control and prolongs insert performance. At a weight of 1.227 kg, the assembly balances mass and manoeuvrability for stable spindle dynamics without imposing excessive load on toolholders. Integration into workshop fleets and process chains Designed for compatibility with standard indexable inserts (RDMT 1003), the cutter integrates easily into existing tool inventories and tool management systems. The clear specification of clamping screws and Torx key size simplifies spare parts stocking and reduces logistical complexity. The product is identified under SKU R216TM, making procurement and traceability straightforward in ERP systems and tool lists. Technical classification references are provided for documentation and parts management. Contact Metav Werkzeuge today to specify the Teknik Makina R216TM for production workflows and arrange expert advice from our Emmerich team — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: R216TM Manufacturer: Teknik Makina SKU: R216TM ECLASS: 21180806 ETIM: EC011860 Facts Diameter: 35 mm Shank diameter: 32 mm Cutting length: 45 mm Overall length: 200 mm Cutting edges: 3 Weight: 1.227 kg Special features For RDMT 1003 indexable inserts Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 Manufacturer: Teknik Cutting Tools SKU: R216TM ECLASS: 21180806 ETIM: EC011860 FAQ How many cutting edges does the cutter have and what benefit do they provide? The cutter is configured with three cutting edges; this arrangement promotes smooth chip evacuation and balanced cutting forces, extending insert life and supporting a consistent surface finish for the R216TM from Teknik Makina. Which insert type is compatible with this tool? This shank-mounted milling cutter is designed for RDMT 1003 indexable inserts, ensuring standardised fitment and easy integration into existing tool sets. What fastening hardware is required for insert changes? Insert fixation uses a locking screw M3.5 and Torx screw M3.5x8.5, operated with a T15 Torx key, which allows secure and repeatable clamping of the RDMT 1003 inserts. What are the key dimensions to verify for toolholder compatibility? Important dimensions include a 35 mm cutting diameter, 32 mm shank, 45 mm cutting length and a 200 mm overall length; these figures are applicable for holder selection and reach planning. Is the tool specified for heavy-duty milling applications? The design emphasises rigidity and stable cutting behaviour for medium-duty production milling; consult process engineers for extreme heavy-duty or highly abrasive conditions to confirm suitability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Shank Cutter For RDMT 1003 Indexable Inserts, 25mm Shank, 45mm Cutting Length, 3 Flutes - Teknik Makina
Take advantage of the stable clamping and simple insert replacement this milling body provides: the combination of a robust 25 mm shank and a Ø35 mm cutting diameter ensures steady performance and reduced vibration, while the Torx fixation speeds maintenance and keeps tooling downtime to a minimum. Order or request advice via Metav Werkzeuge for reliable supply and technical guidance. Shank Milling Cutter R196TM – indexable insert milling body Ø35 mm, 3 cutting edges (Teknik Makina) The Shank Milling Cutter R196TM is a shank-mounted milling body designed for machining operations using RDMT 1003 indexable inserts, providing a compact solution for insert-based milling tasks across general workshop and production environments Ø35 mm cutting diameter Three cutting edges 25 mm shank diameter For RDMT 1003 indexable inserts Consistent clamping for steady machining results A substantial 25 mm shank and a compact overall length deliver high torsional rigidity, which translates into more consistent tool engagement and reduced chatter during interrupted cuts. The relatively low mass (0.508 kg) helps to limit centrifugal stress at higher spindle speeds while still offering the inertia needed for steady milling. These physical attributes provide a reliable basis for repeatable results and predictable tool life when the cutter is mounted and balanced correctly. Balanced cutter geometry to aid chip control and surface finish With a Ø35 mm diameter and three cutting edges, the tool body is optimised to distribute cutting forces evenly across the insert seats. The 45 mm cutting length allows for modest axial engagement while maintaining rigidity, and the three-edge configuration supports efficient chip formation and evacuation. For operators who are new to indexable milling, this geometry reduces the likelihood of uneven loading and helps to achieve a more uniform surface finish with fewer passes. Secure, service-friendly fixation to reduce downtime Insert retention uses a locking screw specification M3.5 and a Torx screw M3.5x8.5, secured with a T15 key, enabling quick, repeatable insert changes and precise clamp torque. This standardised fixation method simplifies maintenance procedures and minimises the time spent at the machine for insert replacement or re-facing. If uncertainty remains about the correct tightening sequence or torque values, Metav Werkzeuge can provide application-oriented advice to streamline setup and protect the inserts. Compatibility that simplifies tooling inventories Designed specifically for RDMT 1003 indexable inserts, the milling body reduces the number of different holders required on the shop floor by consolidating a common insert type into a shank-mounted format. The compact 120 mm overall length and standardised fixation make it straightforward to integrate into existing tool holders and setups. For small to medium batch work, this modular approach supports faster changeovers and more economical stock management without sacrificing robustness. Contact Metav Werkzeuge for a tailored tooling consultation on Teknik Makina milling bodies like the R196TM and arrange reliable delivery from Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: R196TM Manufacturer: Teknik Makina Designation: Schaftfräser for RDMT 1003 Indexable Inserts Facts Diameter: 35 mm Cutting edges: 3 Overall length: 120 mm Shank diameter: 25 mm Cutting length: 45 mm Weight: 0.508 kg Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 Special features For RDMT 1003 indexable inserts Indexable insert milling body Torx T15 fixation system Shank-mounted design FAQ What insert type fits this milling body? The milling body is designed for RDMT 1003 indexable inserts; this compatibility is stated on the TekniK Makina R196TM cutter and ensures standardised insert sourcing. How is the insert secured in the cutter? Retention is achieved with a locking screw M3.5 and a Torx screw M3.5x8.5, tightened using a T15 key to provide repeatable and secure clamping for each insert change. Which shank diameter and overall length does the tool have? The tool features a 25 mm shank and an overall length of 120 mm, dimensions that balance rigidity and accessibility for typical workshop installations. Can the cutter be used across different machines? The shank-mounted format and standardised fixation make the cutter suitable for a wide range of milling spindles and holders; confirm machine compatibility with the tooling interface before fitting the tool. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
High-performance shank cutters and ball nose cutters for efficient milling
Insert shank cutters and ball nose cutters combine flexibility and productivity for a wide range of milling tasks. The category covers steel-bodied shank cutters fitted with indexable inserts for economical roughing, face milling, cornering and slotting, as well as ball nose cutters for contouring and 3D finishing.
How these tools work and where they belong
Shank cutters with indexable inserts use a carrier body made from hardened steel; the cutting edges are provided by removable inserts rather than a solid tool blank. Where tools do not have internal coolant, process heat and chips are managed via external coolant nozzles or compressed air, which is sufficient for open, surface-level and easily accessible milling on standard materials. Shank cutters with internal coolant feature fine internal channels that deliver coolant or blasting air directly to each cutting edge under pressure. This targeted supply is essential for deep pockets, cavities, full slotting and machining of heat-resistant or difficult-to-machine materials, because it prevents chip re-cutting, protects cutting edges from thermal overload and enables higher feed rates and improved surface quality.
Cut cycle times and reduce tooling costs
- Replaceable indexable inserts reduce consumable costs and shorten tool change time.
- Targeted internal coolant improves chip evacuation and extends insert life.
- Robust steel carrier bodies enable heavy-duty roughing without frequent tool replacement.
- Suitable for roughing, planing, corner milling and slot milling as well as precision 3D profiling with ball nose cutters.
A practical choice for purchasing and stocking tools
Metav brings a pragmatic purchasing advantage: a broad range of milling solutions is available from a single European quality hub. Metav’s focus on democratising precision means workshops benefit from a wide assortment, consistent quality control from Emmerich and steady supply — supported by decades of expertise and over 48,000 satisfied customers. Choose Metav for a centralised sourcing strategy that reduces supplier complexity while keeping access to both insert milling cutters (also referred to as insert milling cutters or indexable end mills) and ball nose cutters (also known as ball nose end mills or radius cutters) straightforward.
Quick summary
Insert shank cutters and ball nose cutters deliver flexible, cost-effective milling: replaceable inserts lower running costs, and internal coolant options enable higher performance and longer tool life where chip control is critical.
FAQ
When should I choose a shank cutter with indexable inserts rather than a solid carbide end mill?
Choose shank cutters with indexable inserts for economical roughing and high-stock-removal tasks where replacing inserts is preferable to replacing an entire tool; they are especially effective for face milling, cornering and slotting operations.
Does internal coolant make a measurable difference for ball nose cutters?
Yes. Internal coolant directed to each cutting edge reduces chip re-cutting and thermal stress, which improves surface finish and increases insert life when machining deep pockets, cavities or heat-resistant materials.
Can shank cutters without internal coolant be used for general workshop milling?
Absolutely. Tools without internal coolant rely on external coolant nozzles or compressed air and are well suited to open, superficial and easily accessible milling on standard materials.
What milling operations are shank cutters for indexable inserts typically used for?
Shank cutters with indexable inserts excel at economical roughing, planfräsen (face milling), corner milling and slot milling; ball nose cutters are the preferred choice for 3D profiling and finishing operations.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com