Efficient shaft cutters and ball nose cutters for versatile milling
Shaft cutters and ball nose cutters serve as robust rotating tools for roughing, face milling, corner milling and slotting, offering economical replacement of indexable inserts rather than whole solid tools. Available in versions with internal coolant to feed lubricant directly to each cutting edge or without internal coolant relying on external nozzles, these cutters ensure effective chip evacuation and thermal control suited to standard materials or deep pocket and cavity work. By preventing chip re-cutting and protecting cutting edges, they deliver higher feed rates, improved surface finish and extended tool life in demanding metalworking applications.
35mm Shank Cutter For RDMT 12T3 Indexable Inserts 3 Flutes 45mm Cutting Length, 32mm Shank Diameter - Teknik Makina
Take advantage of a robust shank design and reliable insert compatibility to keep machining runs stable and tool changeovers fast; order directly via Metav Werkzeuge or request tailored advice from our consultants. Shank milling cutter for RDMT 12T3 indexable inserts — Ø35 mm, 3 flutes (Teknik Makina) A shank milling cutter designed for medium‑duty face and peripheral milling that accepts RDMT 12T3 indexable inserts and is suitable for workshop and production use. Ø35 mm cutting diameter 3 cutting edges for steady chip load Compatible with RDMT 12T3 inserts 32 mm shank for secure clamping Consistent material removal with proven cutter geometry The Ø35 mm cutting diameter combined with 3 flutes delivers a balanced cutting action that reduces vibration and evens out the chip load across the insert pockets. By accepting RDMT 12T3 indexable inserts the tool separates the wear element from the tool body: worn inserts can be replaced quickly, which lowers consumable costs and shortens downtime. The modularity of indexable tooling also simplifies inventory management, as a single cutter body can cover a range of operations with the correct insert grades. Rigidity and secure clamping for repeatable accuracy A 32 mm shank provides the necessary stiffness for high‑precision passes and secure mounting in robust tool holders. The insert is retained via an M3,5 locking screw and fixed with an M3,5x8,5 Torx screw, tightened using a T15 key, ensuring a reliable clamp that resists loosening under intermittent loads. The substantial tool mass (approx. 1.855 kg) contributes to stable cutting behaviour in moderate removal operations and supports repeatable positioning when the tool is exchanged. Reach and machining flexibility that reduce set‑ups With a 45 mm cutting length and 300 mm overall length, the design provides reach for operations that require extended overhang without resorting to improvised tooling. The available cutting length permits effective step‑downs while keeping the cutting edge engagement predictable, so programmed feed rates and depths remain consistent. This combination helps to reduce changeovers and allows longer, uninterrupted production runs when paired with the right insert grade. Practical advantage in workshop workflows As a component of a modular tooling strategy, this cutter supports rapid insert changes and straightforward tool life management. The standardised insert interface means compatibility with a wide range of grades for different materials and cutting conditions, allowing a clear cost‑benefit analysis: fewer complete tools in stock, lower per‑cutting‑edge cost and faster maintenance cycles. Combined with Metav’s emphasis on reliable supply and technical expertise, the cutter complements a stable production setup. For reliable machining results with Teknik Cutting Tools’ shank milling cutters, contact Metav Werkzeuge in Emmerich for specification advice and dependable supply from stock. Technical data Article number: R258TM Manufacturer: Teknik Makina SKU: R258TM Facts Diameter: 35 mm Cutting edges: 3 Shank diameter: 32 mm Cutting length: 45 mm Overall length: 300 mm Weight: 1.855 kg Special features For RDMT 12T3 indexable inserts Locking screw: M3,5 Torx screw: M3,5x8,5 Torx key: T15 FAQ Which inserts fit this cutter? The cutter is designed for RDMT 12T3 indexable inserts; use the appropriate insert grade for the workpiece material to achieve optimal wear and surface finish. What clamping hardware is required for insert replacement? Insert retention uses an M3,5 locking screw and an M3,5x8,5 Torx screw; a T15 key is specified for tightening. Is the shank suitable for standard tool holders? The 32 mm shank is compatible with holders that accept that diameter and provides the rigidity required for stable machining. How long is the cutting portion and what reach does the tool offer? The tool provides a 45 mm cutting length and a 300 mm overall length, offering extended reach for operations where additional overhang is needed. Can this cutter reduce tool inventory costs? Yes — by using RDMT 12T3 indexable inserts the body remains in service while worn inserts are replaced, lowering the per‑cutting‑edge cost and simplifying stock management. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Shank Milling Cutter for APKT 1604 Indexable Inserts 3 Flutes, 25mm Shank Diameter 45mm Cutting Length - Teknik Makina
Take advantage of precision, compatibility and straightforward maintenance: the combination of a Ø 35 mm cutting head, Shank Ø 25 mm and 3 cutting edges ensures stable milling with indexable inserts and predictable tool life. Order the shaft milling cutter directly via Metav Werkzeuge or ask the consultants for tailored cutting data. S262TM Shaft milling cutter for APKT 1604 indexable inserts by Teknik Makina — Ø 35 mm, Shank Ø 25 mm A robust milling solution: the S262TM is a shaft-mounted cutter designed for milling with APKT 1604 indexable inserts in typical precision and production environments Indexable cutter for APKT 1604 inserts Diameter 35 mm with 3 flutes Shank Ø 25 mm for secure clamping Torx M4x10 screw; T15 key required Reliable compatibility that simplifies tooling decisions The holder is engineered specifically for use with APKT 1604 indexable inserts and is compatible with inserts from Korloy, removing uncertainty when standardising tooling across a fleet of machines. With a Shank Ø 25 mm and a body Ø 35 mm, the tool is balanced for rotational stability; this reduces vibration and helps to protect insert edges. The 3 cutting edges arrangement offers a compromise between chip evacuation and cutting continuity, which supports consistent surface finishes in interrupted and continuous milling operations. As an indexable system, insert replacement is cost-effective and reduces downtime compared with solid-tool replacement. Performance characteristics that support efficient production A 90° cutting angle promotes predictable axial engagement and straightforward depth control in slotting and face milling tasks, while the Cutting length 45 mm allows deeper passes without changing the tool for many common setups. The cutter’s geometry is intended to deliver stable chip formation and even load distribution across inserts, contributing to repeatable cycle times and lower scrap rates. The M4x10 fixation with a T15 key provides secure clamping of the insert seat; this precise clamping translates into reproducible cutting behaviour across tool changes and supports high process reliability in serial production. Practical handling and maintenance for workshop workflows Insert changes are performed with the supplied Torx specification (M4x10 screw, T15 key), so replacements are rapid and require only basic tools. The indexable design means consumable wear is confined to inserts; the body remains in service, simplifying inventory and maintenance planning. The moderate overall length and the Shank Ø 25 mm make the tool straightforward to install in standard tool holders and collet chucks, reducing set-up time. Clear, repeatable clamping ensures the insert position remains constant after each change, which supports consistent part quality without extensive rework. Where this cutter adds value and how it fits production needs This shaft-mounted cutter suits CNC workshops, job shops and production lines that prefer indexable systems for economy and flexibility. The combination of Ø 35 mm, a robust shank and a 3-edge configuration means the tool adapts well to slotting, shoulder milling and light face-milling operations where insert-based tooling is preferred. Technical purchasers benefit from predictable stocking — only the inserts are consumed — and engineers benefit from repeatable results when standardising cutting parameters across machines. The product is listed under eClass 21180806 and ETIM EC011860, aiding integration into purchasing systems. For availability, technical parametrisation or to request compatible insert recommendations from Metav Werkzeuge, contact our specialists who can advise on cutting conditions and supply the Teknik Makina S262TM with fitting inserts and accessories Technical Data Article number: S262TM Manufacturer: Teknik Makina Description: Shaft milling cutter for APKT 1604 indexable inserts ECLASS: 21180806 ETIM: EC011860 Facts Diameter: 35 mm Shank diameter: 25 mm Cutting length: 45 mm Overall length: 120 mm Cutting edges: 3 Weight: 0.498 kg Cutting angle: 90° Special features Compatible with APKT 1604 indexable inserts Compatible insert brand: Korloy Torx screw: M4x10 Torx key size: T15 SKU: S262TM FAQ Which inserts fit this milling cutter? The S262TM is designed for APKT 1604 indexable inserts; Korloy APKT 1604 inserts are suitable and commonly used with this cutter. What clamping hardware is required for insert replacement? Insert clamping uses an M4x10 Torx screw; a T15 Torx key is specified for secure tightening. What are the main dimensions to check for holder compatibility? Key dimensions are Diameter 35 mm, Shank Ø 25 mm, Cutting length 45 mm and overall length 120 mm; these determine fit in tool holders. Is the cutter suitable for serial production? Yes — the indexable design of the Teknik Makina S262TM supports economical consumable replacement and consistent performance for serial production runs. How many cutting edges does the tool have and what is the effect? The tool has 3 cutting edges, balancing chip removal and surface quality to provide stable cutting in a range of milling tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Shank Milling Cutter For APXT 1003 Indexable Inserts 90° Cut, 4 Flutes, 40mm Cutting Length - Teknik Makina
Benefit from a high-stability cutting solution that combines a 35 mm cutting diameter, 25 mm shank and compatibility with APXT 1003 indexable inserts for reliable material removal and reduced tool changes — order directly via Metav Werkzeuge or consult the technical team for application advice. S171TM Insert Milling Cutter by Teknik Makina — 35 mm Diameter, 25 mm Shank The S171TM is an insert milling cutter designed for APXT 1003 indexable inserts, delivering stable face and shoulder milling performance in CNC and manual milling setups. 35 mm diameter for wider material engagement 25 mm hardened shank for stable clamping Compatible with APXT 1003 indexable inserts Four cutting edges, 90° cutting angle Consistent material removal with high engagement The S171TM is engineered to provide predictable cutting behaviour through its 35 mm diameter and four cutting edges, which allow for efficient chip evacuation and consistent material removal rates. The 90° cutting angle facilitates square shoulders and reduced side forces, translating into improved surface finish and fewer passes for many milling tasks. Performance benefits are rooted in geometry rather than speculative claims, supporting higher productivity in repeat operations. Rapid insert changes and dependable clamping Insert handling focuses on uptime: the tool accepts APXT 1003 indexable inserts (Korloy-compatible) and is secured with a Torx M2.5x5.5 clamping screw tightened with a T8 key, enabling quick, repeatable insert replacement and minimal downtime. The indexable system reduces tooling inventory while allowing damaged edges to be rotated rather than replacing the whole tool, yielding clear operational economy for batch-oriented production. Rigidity and balance for repeatable accuracy A 25 mm shank diameter and a total length of 120 mm create a stiff, well-balanced assembly suited to stable clamping in standard tool holders. The cutter’s 40 mm cutting length offers a compromise between reach and rigidity for many face- and shoulder-milling tasks, while the modest weight of 0.532 kg helps to reduce spindle load and vibration. Together these characteristics support consistent dimensional results and extended insert life under properly set conditions. Practical application scope and compatibility Designed primarily for insert-based milling operations, this cutter is most effective where quick indexability and solid clamping are required. Compatibility with APXT 1003 inserts from Korloy ensures access to a wide range of grades for varied materials and cutting conditions. Where process reliability and simple maintenance are priorities, the tool offers a pragmatic solution for workshops and production lines seeking a balance between productivity and predictable service intervals. Contact Metav Werkzeuge for availability, grade recommendations and delivery options for the Teknik Cutting Tools S171TM insert milling cutter — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S171TM Brand: Teknik Makina Product: S171TM insert milling cutter for APXT 1003 indexable inserts Core measurements Diameter: 35 mm Shank diameter: 25 mm Cutting length: 40 mm Overall length: 120 mm Number of cutting edges: 4 Weight: 0.532 kg Cutting angle: 90° Special features Compatible inserts: APXT 1003 Compatible insert manufacturer: Korloy Clamping screw: Torx M2.5x5.5 Torx key: T8 SKU: S171TM FAQ What inserts fit this cutter? The cutter accepts APXT 1003 indexable inserts; it is specified for APXT 1003 compatibility and matches Korloy insert geometries. How is the insert secured? Inserts are retained with a Torx M2.5x5.5 clamping screw tightened using a T8 key, enabling secure and repeatable clamping. What machining tasks suit this tool? This insert milling cutter is intended for face and shoulder milling where indexable inserts and quick edge changes are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Shell Mill For APKT 1604 Indexable Inserts 3 Cutting Edges, 350mm Overall Length - Teknik Makina
Take advantage of a robust, long-reach shank design and precise compatibility with APKT 1604 indexable inserts to maintain steady production and predictable tool life; order the cutting solution directly via Metav Werkzeuge or consult our specialists for sizing and application advice. Shaft milling cutter S454TM – 35 mm diameter shank cutter for APKT 1604 indexable inserts by Teknik Makina The Shaft milling cutter S454TM is a long-reach shank cutter engineered for reliable face and shoulder milling with indexable inserts, suited to production and workshop environments where repeatable performance and straightforward insert changes matter. *Compatible with APKT 1604 Korloy inserts *35 mm cutting diameter for robust milling *32 mm shank, 350 mm overall length Reliable insert system for predictable machining results This shank cutter uses APKT 1604 indexable inserts, a widely available insert format that simplifies tool management and minimises downtime during regrinds or replacements. The insert interface ensures consistent seat location and repeatable cutting geometry; when paired with Korloy inserts the tool achieves uniform chip control and stable cutting forces. The main benefit is reduced clamping and setup time, which supports steady-cycle production and easier inventory handling of spare inserts. Stiff shank and extended reach reduce deflection in deep operations With a 32 mm shank and an overall length of 350 mm, the tool is designed for jobs requiring extended reach without sacrificing rigidity. The larger shank diameter improves resistance to bending and vibration, which in turn protects surface finish and tool life when performing shoulder milling or light slotting. For workshops facing occasional long-reach passes, this tool offers a balance between accessibility and stability, translating to fewer rejects and less rework. Efficient cutting geometry for shorter cycle times Equipped with three cutting edges and a 90° cutting angle, the cutter provides efficient material removal and good radial support for shoulder faces. The arrangement of edges supports even load distribution across inserts, allowing consistent feed rates and predictable machining times. Where throughput is critical, this geometry delivers a higher material removal rate compared with single-edge solutions, while still offering straightforward indexable-insert replacement for sustained productivity. Service-friendly assembly and clear maintenance cues Fast, tool-free insert changes are supported by a simple Torx fixing system (screw M4x10, key T15), enabling quick exchange of worn inserts on the shopfloor. The use of a standard Torx screw reduces the risk of incorrect fastening tools and helps maintain correct clamping torque for secure insert seating. As a result, maintenance intervals are easier to plan and the toolholder remains accessible to trained technicians, helping to keep uptime high. For a reliable Teknik Makina shank solution that fits existing APKT 1604 insert stocks, contact Metav Werkzeuge for tailored procurement and technical assistance by phone +49 2822 7131930 or by email at info@metav-werkzeuge.com Technical data Article number: S454TM Manufacturer: Teknik Makina Suitable for inserts: APKT 1604 Compatible insert brand: Korloy Torx screw: M4x10 Torx key: T15 Facts Cutting diameter: 35 mm Shank diameter: 32 mm Cutting length (shank cutting): 65 mm Overall length: 350 mm Number of cutting edges: 3 Cutting angle: 90° Weight: 2.332 kg Special features Indexable inserts system Long-reach shank design Standard Torx fastening for inserts Suitable for face and shoulder milling FAQ Which inserts fit this cutter? The cutter accepts APKT 1604 indexable inserts; compatibility has been specified for Korloy inserts and standard seat geometry. Is the shank suitable for heavy milling? The 32 mm shank and 350 mm overall length of the S454TM balance reach and rigidity; for heavy roughing, ensure clamping and machine rigidity are adequate. What fasteners are used for insert fixation? Insert fastening uses a Torx screw M4x10 and Torx key T15, enabling secure and repeatable clamping of the inserts. Can the cutter be used for finishing passes? Yes — with the correct choice of APKT 1604 finishing inserts, the toolhead is suitable for finishing shoulders and face milling where indexable-insert solutions are preferred. What are the main benefits of this Teknik Makina shank cutter? The Teknik Makina S454TM provides straightforward insert replacement, extended reach with reduced deflection thanks to its 32 mm shank, and efficient cutting via three cutting edges for improved cycle times. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Shell Mill for XNKT 0805 Indexable Inserts with Internal Coolant, 130mm Overall Length - Teknik Makina
Take advantage of the tool's internal coolant and 35 mm diameter for consistent chip evacuation and stable metal removal; combine these features with compatibility for Korloy XNKT 0805 inserts to secure efficient machining cycles — order directly via Metav Werkzeuge or consult the team for application advice. S843-3TM — Indexable insert milling cutter, 35 mm diameter, coolant-through (Teknik Makina) A S843-3TM indexable insert milling cutter engineered for coolant-through machining and compatible with XNKT 0805 indexable inserts for reliable roughing and semi-finishing operations. 35 mm diameter for stable cutting Coolant-through design for chip evacuation Holds Korloy XNKT 0805 indexable inserts 32 mm shank diameter for rigid clamping Higher metal removal rates through stable geometry The tool’s 35 mm diameter and four cutting edges deliver a geometry optimised for high material removal while keeping cutting forces predictable. The combination of a robust body and 4 cutting edges enables longer tool engagement with each indexable insert, which translates into fewer passes and shorter cycle times. For production-oriented workshops this means a measurable improvement in throughput without compromising surface quality. The presence of internal coolant ensures coolant reaches the cutting zone directly, supporting chip control and temperature management — a decisive factor when machining under higher feed or depth of cut. Secure clamping and fast insert changes reduce downtime A 32 mm shank provides the rigidity required for heavy cuts and minimises vibration when clamped in a toolholder, improving tool life and repeatability. Insert changes are straightforward: the cutter uses a Torx screw (Torx T15) with an M4x10 fastening, permitting quick replacement of Korloy XNKT 0805 inserts with standard workshop tools. The simplified replacement routine reduces unproductive time at the machine and helps maintain consistent process parameters across shifts. Clear mechanical interfaces and well-defined fastenings also make maintenance predictable and safe. Versatile performance for roughing and semi-finishing with predictable economics With a cutting length of 40 mm and an overall length of 130 mm the cutter balances accessibility and stiffness for a range of milling tasks. The coolant-through capability contributes to longer insert life and consistent surface quality, lowering total machining cost per component. The tool’s design suits integration into standard production cells where process reliability is essential: repeatable insert indexing, efficient chip evacuation and robust clamping combine to reduce scrap rates and increase first-pass yield. For buyers seeking dependable tooling backed by logistics and expert advice, the Metav supply chain offers a transparent and dependable delivery route. Choose the Teknik Makina S843-3TM for coolant-through milling where stable clamping and Korloy XNKT 0805 compatibility matter — contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: S843-3TM Label: 35mm Schaftfräser XNKT 0805 L130mm mit Innenkühlung Product type: Indexable insert milling cutter Manufacturer: Teknik Makina Facts Diameter: 35 mm Total length: 130 mm Shank diameter: 32 mm Cutting length: 40 mm Number of cutting edges: 4 Weight: 0.914 kg Special features Internal coolant (coolant-through) Compatible inserts: XNKT 0805 Compatible insert manufacturer: Korloy Torx key: T15 Torx screw: M4x10 FAQ Which inserts fit this milling cutter? The S843-3TM accepts XNKT 0805 indexable inserts; compatibility is specified for Korloy XNKT 0805 inserts. What advantage does the internal coolant provide? Internal coolant on the S843-3TM delivers coolant directly to the cutting zone, improving chip evacuation and thermal control for longer insert life. Is the shank suitable for rigid clamping in standard holders? Yes — the 32 mm shank diameter is intended for rigid clamping, reducing vibration and improving repeatability during heavy cuts. How many cutting edges are engaged and what does this mean for productivity? The cutter has four cutting edges; this increases engagement per revolution and allows higher material removal rates with controlled cutting forces. What fastening hardware is required for insert changes? Insert clamping uses a Torx T15 key and an M4x10 screw, enabling quick and repeatable insert replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Solid Carbide End Mill for XNKT 0805 Indexable Inserts, 4 Flutes, 130mm Length - Teknik Makina
High radial stiffness from the 35 mm body together with a 32 mm shank and four cutting edges delivers stable chip removal and predictable tool life for heavy roughing and shoulder milling. The tool accepts XNKT 0805 indexable inserts (Korloy) and is secured with M4x10 Torx screws tightened using a T15 key. Order the cutter directly via Metav Werkzeuge or ask the consultants for compatibility advice. 35 mm End Mill for XNKT 0805 Indexable Inserts — Teknik Makina The 35 mm end mill for XNKT 0805 indexable inserts is a purpose-built milling cutter for robust material removal and reliable clamping in CNC machining and production environments. 35 mm diameter for robust material removal 32 mm shank for high clamping stability Accepts XNKT 0805 inserts (Korloy compatible) Torx T15 screws with M4x10 fixing Improved productivity through stable cutting performance The solid design and 32 mm shank reduce vibration and deflection during heavy passes, translating into more consistent surface finishes and extended insert life. With four cutting edges, the cutter balances material removal rate and cost-efficiency: multiple edges mean fewer index changes and longer intervals between maintenance stops. The combination of a substantial 35 mm body and secure screw clamping contributes to high stability, which is particularly valuable when machining interrupted cuts or shoulder profiles. Secure insert retention and straightforward handling The clamping system uses M4x10 Torx screws tightened with a T15 key to ensure repeatable retention torque and simple insert replacement. This mechanical arrangement reduces downtime during tool changes and minimises the risk of insert movement under load. The cutter accepts XNKT 0805 indexable inserts, a standard format that allows workshops to source suitable grades from established manufacturers such as Korloy, enabling fast adaptation to different materials and cutting conditions. Compatibility that supports flexible production planning Designed for indexable inserts, the tool allows quick switching between carbide grades and geometries to match workpiece materials and process objectives. The compatibility with Korloy inserts broadens the choice of grades for cast iron, steel or alloy applications where an indexable insert approach is preferred. The tool’s numerical and mechanical properties support integration into standard toolholders and holder setups common in milling centres and production cells. Practical workshop benefits and maintenance The cutter’s measured dimensions—35 mm diameter, 130 mm overall length and 40 mm cutting length—offer a pragmatic balance between reach and rigidity for many milling tasks. The weight of approximately 0.914 kg gives a sense of the tool’s robust construction without being unwieldy for routine handling. Marked and standardised fixing elements simplify inventory management and ensure that spare screws and keys are straightforward to keep in stock, contributing to predictable uptime in the workshop. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Makina indexable insert milling cutter (SKU S843-2TM) into production — phone +49 2822 7131930 or email info@metav-werkzeuge.com for technical matching and order support. Technical data Article number: S843-2TM Brand: Teknik Makina Product type: Indexable insert milling cutter Description: 35mm end mill for XNKT 0805 indexable inserts Facts Diameter: 35 mm Overall length: 130 mm Shank diameter: 32 mm Cutting length (shank): 40 mm Cutting edges: 4 Weight: 0.914 kg Torx key: T15 Torx screw: M4x10 Special features Compatible with XNKT 0805 indexable inserts Insert manufacturer compatibility: Korloy SKU: S843-2TM Label: 35mm Schaftfräser XNKT 0805 L130mm FAQ What inserts does this milling cutter use? The cutter is designed for XNKT 0805 indexable inserts; the specification allows the use of standard Korloy grades suitable for the intended material and cutting strategy. Is the tool suitable for heavy roughing operations? Yes. The combination of 35 mm diameter, a 32 mm shank and four cutting edges gives the mechanical stability required for robust roughing and shoulder milling tasks. Which fixing hardware is used for insert clamping? Insert clamping is secured with M4x10 Torx screws tightened using a T15 key to ensure repeatable and secure retention. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Solid Carbide Milling Cutter For TPKN 1103-2204 Indexable Inserts, 2 Flutes 25mm Shank Diameter - Teknik Makina
Take advantage of the combination of precise insert compatibility, a robust shank and a secure fixing system to keep machining cycles reliable and efficient. Order the Teknik Makina S128TM through Metav Werkzeuge for dependable supply and expert advice. Insert milling cutter S128TM — Teknik Makina, Ø 35 mm with 25 mm shank A Shaft milling cutter S128TM configured for indexable TPKN 1103–2204 inserts, intended for medium‑duty face and slot milling in industrial workshops Compatible with TPKN 1103–2204 indexable inserts 35 mm cutting diameter for stable material removal 25 mm shank for rigid toolholding M6x17 fixing screw, 4 mm Allen key supplied Reliable insert system for consistent cycle times The body is engineered to accept TPKN 1103–2204 indexable inserts, providing a fast replacement routine and consistent cutting geometry. Using indexable inserts reduces downtime compared with regrinding solid cutters, which directly improves uptime and throughput. The two cutting edges supply balanced cutting forces, lowering vibration and enabling a steadier surface finish on typical engineering materials. The result is a stable, predictable tool life that supports continuous production planning. Rigid shank and secure fastening for dimensional accuracy A shank diameter of 25 mm gives a stiff connection to the spindle, which helps maintain concentricity and reduces deflection during cuts. The cutter is secured with an M6x17 fixing screw and a 4 mm Allen key, ensuring the insert seat remains firmly clamped. This simple, mechanical fastening reduces the risk of insert movement under load and keeps tolerances within expected limits, making the assembly suitable for repetitive tasks in jobbing and small‑batch production. Practical dimensions that speed setup and changeovers With a 35 mm cutting diameter and 120 mm overall length, the tool balances accessibility and reach without sacrificing rigidity. A 45 mm cutting length offers sufficient engagement for most face and shoulder operations while limiting overhang. The module’s modest weight (0.507 kg) assists with handling during tool changes and keeps dynamic loads on the spindle predictable. These proportions simplify tool selection and shorten machine setup times, contributing to faster changeovers on the shop floor. Clear benefits for process planners and machinists Choosing this cutter body supports a cost‑efficient tool strategy: replaceable inserts reduce per‑part tooling cost, while the design stabilises cutting conditions. The combination of insert compatibility and a robust shank benefits shops that require repeatable component quality without complex retooling. Technical staff will appreciate the straightforward mechanics and the ability to pair the body with common indexable grades for different materials and applications. Discuss the Teknik Makina S128TM insert milling body with Metav Werkzeuge to confirm insert compatibility and fast delivery from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: S128TM Manufacturer: Teknik Makina Core measurements Cutting diameter: 35 mm Shank diameter: 25 mm Cutting length (shank): 45 mm Number of cutting edges: 2 Overall length: 120 mm Weight: 0.507 kg Fixing screw: M6x17 Wrench/key: 4 mm Allen key Special features For TPKN 1103–2204 indexable inserts Two‑edge insert configuration Compact overall length for reduced overhang FAQ What inserts fit this cutter body? The S128TM is specified for TPKN 1103–2204 indexable inserts, allowing rapid insert changes and straightforward grade swaps for different materials. Is the shank suitable for standard toolholders? Yes, the 25 mm shank is compatible with common collet and chuck toolholding systems that accept 25 mm shanks. How is the insert secured to the cutter? Inserts are clamped using an M6x17 fixing screw; the delivery includes a 4 mm Allen key for secure and repeatable tightening. Can this cutter be used for face milling and shoulder milling? The S128TM’s geometry and 45 mm cutting length make it suitable for both face milling and light shoulder operations where indexable inserts are preferred. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Solid Carbide Shank Cutter for RDMT 12T3 Indexable Inserts 25mm Shank, 40mm Cutting Length - Teknik Makina
Take advantage of a compact, insert-based milling solution that combines a 35 mm cutting diameter with a 25 mm shank for stable clamping and predictable tool life; the three-edge configuration reduces machining time while maintaining surface quality. Order the shank milling cutter directly via Metav Werkzeuge or consult their advisors for application support. Shank milling cutter for RDMT 12T3 indexable inserts — 35 mm diameter, 25 mm shank (Teknik Makina) A shank milling cutter compatible with RDMT 12T3 indexable inserts, built for accurate face and shoulder milling in general machining environments. *Insert-compatible RDMT 12T3 *35 mm cutting diameter *25 mm shank for secure mounting *Three cutting edges for efficient removal Improve cycle times with insert-based efficiency The cutter’s insert system, designed for RDMT 12T3 indexable inserts, delivers repeatable cutting performance and fast service intervals. Using replaceable inserts means less downtime than regrinding solid-carbide tools; the toolholder geometry supports consistent chip formation so that machining remains stable across repeated operations. The result is measurable productivity gains when multiple short runs or mixed-batch work are typical. Secure mounting and predictable rigidity for stable cuts A 25 mm shank ensures secure clamping in standard toolholders and reduces runout compared with undersized connections. The combination of a solid shank and the cutter’s mass distribution helps maintain axial stability during moderate radial depths, which translates into improved surface finishes and longer insert life. The three cutting edges arrangement balances material removal and cutting forces for smoother machine behaviour. Practical dimensions that match workshop workflows With a 35 mm cutting diameter and a 40 mm cutting length, the cutter offers a compact footprint while providing sufficient engagement for many facing and slotting operations; the 120 mm overall length keeps reach without excessive overhang. The modest tool mass supports faster acceleration on smaller machining centres, aiding shorter cycle times and higher throughput when moving between operations. Clear service cues and fastening details for predictable maintenance Fastening components are standardised: a M3.5 locking screw and a M3.5x8.5 Torx screw secure the inserts, and the specified Torx size is T15, enabling repeatable torque and safe clamping. These standard sizes simplify workshop inventory and enable technicians to change inserts quickly. For planners, the tool’s weight of 0.485 kg helps calculate dynamic loads and toolchanger handling without guesswork. For robust, repeatable milling performance from Teknik Makina, contact Metav Werkzeuge for tailored application advice and ordering via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: R232TM Manufacturer: Teknik Makina Product: Shank milling cutter for RDMT 12T3 indexable inserts SKU: R232TM Facts Diameter: 35 mm Shank diameter: 25 mm Cutting length: 40 mm Overall length: 120 mm Number of cutting edges: 3 Weight: 0.485 kg Special features Compatible inserts: RDMT 12T3 Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key size: T15 FAQ What insert type is required for this cutter? The cutter is designed for RDMT 12T3 indexable inserts; matching inserts provide the intended cutting geometry and chip control. How many cutting edges does the tool have and what is the benefit? This shank milling cutter has three cutting edges, which balance removal rate and cutting forces for stable operation and improved surface quality. What shank size is needed for mounting? A 25 mm shank diameter is specified; the shank size supports secure clamping in compatible toolholders and helps limit runout. What fastening hardware does the cutter use? Insert clamping uses a M3.5 locking screw and a M3.5x8.5 Torx screw with a T15 Torx drive for repeatable tightening. Is the tool suitable for use on smaller machining centres? The compact 35 mm diameter and 120 mm overall length make the cutter appropriate for many small to medium machining centres where reduced overhang is an advantage. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Solid Shank Cutter for ADKT 1505 Indexable Inserts 3 Flutes, 32mm Shank Ø 50mm Cutting Length - Teknik Makina
The combination of a Ø35 mm cutting diameter, a secure Ø32 mm shank and compatibility with ADKT 1505 indexable inserts delivers efficient, repeatable milling performance for general workshop and production tasks. Order the shank milling cutter directly via Metav Werkzeuge or contact the consultants for application advice. Shank milling cutter S321TM — for ADKT 1505 indexable inserts, Ø35 mm (Teknik Makina) The Shank milling cutter S321TM is a durable milling body designed to accept ADKT 1505 indexable inserts for versatile face and shoulder milling in production and toolroom environments 35 mm cutting diameter for medium-depth milling Three-indexable cutting edges for stable cuts Ø32 mm shank ensures secure clamping Compatible with ISCAR ADKT 1505 inserts Faster cycle times through stable, multi-edge cutting The tool is engineered for reliable material removal: a three-edge indexable design maintains cutting balance and reduces vibration, which shortens cycle times and improves tool life. The Ø35 mm cutting diameter provides a practical balance between cut width and rigidity, enabling consistent removal rates in batch production. For operations migrating from solid cutters, the indexable system reduces downtime associated with regrinds while keeping tooling costs manageable. Secure clamping and simple insert changes for uptime A robust Ø32 mm shank ensures firm clamping in common toolholders, delivering axial and radial stability during interrupted cuts. Insert retention is achieved with an M4x10 Torx screw (Torx key T15), allowing quick, repeatable replacement of ADKT 1505 inserts supplied by ISCAR. The straightforward fastening method minimises setup time and supports predictable torque application, which contributes to consistent seating and repeat accuracy across tool changes. Clear compatibility and application range Designed for use with ADKT 1505 indexable inserts, the cutter body accepts industry-standard insert geometry, facilitating access to a wide range of grades and edge preparations. Compatibility with ISCAR-branded inserts supports high-performance grades for finishing and roughing alike. The tool’s overall length of 200 mm and 50 mm effective cutting length make it suitable for shoulder milling and shallow slotting where accessibility and rigidity are required. Built for workshop reliability and measurable handling At a weight of 1.252 kg, the shank milling cutter offers a stable feel during mounting and handling while remaining manageable for routine tool changes. The tool’s configuration favours repeatability: the indexable system and standard screw interface promote consistent seating, while the compact geometry aids in reducing overhang in the holder. These properties contribute to predictable tool behaviour that benefits process planning and quality control. For ordering, application planning or to request machining recommendations for ADKT 1505 inserts contact Metav Werkzeuge — Metav’s advisors can assist by phone on +49 2822 7131930 or by e‑mail at info@metav-werkzeuge.com Technical data Article number: S321TM Manufacturer: Teknik Makina Product: Shank milling cutter for ADKT 1505 indexable inserts Torx screw: M4x10 Torx key size: T15 Facts Cutting diameter: 35 mm Shank diameter: 32 mm Cutting length (shaft): 50 mm Number of cutting edges: 3 Overall length: 200 mm Weight: 1.252 kg Special features Indexable insert system: ADKT 1505 Insert compatibility: ISCAR Securing screw: M4x10 (Torx T15) Designed for face and shoulder milling FAQ What insert type does this cutter accept? The cutter accepts ADKT 1505 indexable inserts; the design is intended for this insert family and provides secure retention via an M4x10 Torx screw. How many cutting edges are used and what is the benefit? The cutter uses three indexable cutting edges; this configuration improves balance, reduces vibration and extends insert life under moderate cutting conditions. Which insert manufacturers are compatible? The tool is compatible with ISCAR ADKT 1505 inserts and with other manufacturers offering the same ADKT 1505 geometry. What are the key dimensions for holder selection? Key dimensions include a Ø32 mm shank, Ø35 mm cutting diameter and 200 mm overall length, which should be matched to the machine’s toolholder and reach requirements. How is the insert secured and what tool is required? Inserts are secured with an M4x10 Torx screw; a T15 Torx key is required for tightening and loosening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm Solid Shank Cutter For RDMT 12T3 Indexable Inserts 45mm Cutting Length, 3 Flutes - Teknik Makina
Take advantage of the combination of reliable insert compatibility, compact dimensions and secure clamping for consistent machining results. Benefit from a robust shank, clear fitting specifications and direct support from Metav Werkzeuge for seamless integration into production. R240TM shank cutter — 35 mm diameter, 3 cutting edges (Teknik Makina) R240TM shank cutter for high‑productivity milling with RDMT 12T3 indexable inserts, suitable for general milling operations where quick insert changes and stable cutting are essential Compatibility with RDMT 12T3 inserts 35 mm cutting diameter for compact machining Shank Ø 32 mm, overall length 150 mm Faster metal removal with consistent chip control The R240TM is designed for dependable material removal thanks to its 35 mm cutting diameter and 3 cutting edges, which combine to deliver an efficient balance between stock removal and surface finish. Using RDMT 12T3 indexable inserts allows for rapid indexation and reduced downtime since inserts can be rotated or replaced without removing the holder. The tool’s cutting length of 45 mm supports deeper engagement where required, while the robust shank geometry maintains run‑out tolerance under load — an essential factor for reliable cycle times in batch production. Secure clamping for repeatable accuracy Stable insert retention is achieved through a clearly specified locking system: M3.5 locking screw together with an M3.5x8.5 Torx screw and a T15 Torx key for service operations. This fastener arrangement reduces micro‑movement at the cutting edge, improving repeatability and lowering the risk of chatter during interrupted cuts. The combination of a solid 32 mm shank and precise fastening means the cutter maintains its position in the toolholder, translating to predictable tool life and fewer scrap parts. Practical handling and workshop integration Weighing 0.9 kg and measuring 150 mm in overall length, the R240TM is compact enough for standard tool changers while remaining substantial for stable machining. The shaft and insert compatibility are specified to simplify shop planning: the tool accepts RDMT 12T3 inserts and uses standard Torx service tooling for maintenance. Where tool selection must be coordinated across a fleet, these clear specifications assist purchasing and maintenance planning, reducing downtime and ensuring a straightforward spare‑part inventory. For tailored advice on integrating the Teknik Makina R240TM shank cutter into existing setups, or for questions on insert selection and clamping parameters, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and fast supply. Technical data SKU: R240TM Designation: shank cutter for RDMT 12T3 indexable inserts Brand: Teknik Makina eClass: 21180806 ETIM: EC011860 Core dimensions Cutting diameter: 35 mm Shank diameter: 32 mm Cutting length: 45 mm Overall length: 150 mm Weight: 0.9 kg Features & fittings Number of cutting edges: 3 Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 Compatible inserts: RDMT 12T3 FAQ What inserts does this cutter accept? The cutter is specified for RDMT 12T3 indexable inserts; these inserts are used for rapid indexation and straightforward replacement in the R240TM. Which shank and holder sizes suit this tool? The R240TM has a 32 mm shank diameter, matching holders designed for that shank size and ensuring a secure fit for stable machining. What fastening hardware is required for insert retention? Insert retention uses an M3.5 locking screw and an M3.5x8.5 Torx screw; a T15 Torx key is used for assembly and maintenance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Cutter For 4NKT 0603 Indexable Inserts 5 Flutes, 32mm Shank - Teknik Makina
Take advantage of a robust, indexable-insert system that combines precise Ø 40 mm cutting, five reliable cutting edges and a rigid 32 mm shank for stable machining and reduced tool-change time. Order the tool directly via Metav Werkzeuge or request advice from our consultants for an efficient integration into the production line. S477-2TM Shank milling cutter for 4NKT 0603 indexable inserts, Ø 40 mm (Teknik Makina) The S477-2TM is a shank milling cutter engineered for industrial milling with 4NKT 0603 indexable inserts, offering a compact cutting diameter and a long overall length for secure tool engagement in medium to heavy operations. For 4NKT06 indexable inserts Ø 40 mm cutting diameter Five cutting edges for steady performance Shank Ø 32 mm for high rigidity 200 mm overall length for stable setup Higher throughput with reliable insert technology The cutter is built around indexable inserts, enabling economical machining by replacing only the cutting tips rather than the whole tool. With a Ø 40 mm cutting diameter and five cutting edges, the tool sustains material removal rates while maintaining surface quality; fewer interruptive tool changes translate into measurable productivity gains on batch runs and serial production. Secure holding and quick insert changes reduce downtime A shank Ø 32 mm delivers stiffness at the holder interface, reducing deflection and improving dimensional repeatability when cutting. Inserts are fastened with an M3x6.5 Torx screw; the corresponding T8 key allows swift and secure replacement. This combination of a rigid shank and accessible fastening minimises setup times and supports predictable cycle planning for workshop teams. Dimensioned for practical workshop handling and setup The tool is Taegutec-compatible, designed specifically for the 4NKT06 insert family, and offers a 200 mm overall length with a 40 mm cutting segment. These dimensions provide a balance between reach and rigidity, while the listed mass of 1.395 kg contributes to stable running without excessive inertia—helpful when optimising spindle load and fixture design for reliable machining. Robust construction for repeated industrial use Manufactured by Teknik Makina, the tool combines precise engineering with practical serviceability. The robust build supports frequent indexing cycles and the modular insert concept lowers long-term tooling costs, making this cutter a pragmatic choice for workshops seeking both performance and predictable lifecycle costs. For dependable milling performance choose the S477-2TM by Teknik Makina — contact Metav Werkzeuge for product guidance and integration support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S477-2TM Manufacturer: Teknik Makina Item name: Shank milling cutter for 4NKT 0603 indexable inserts ECLASS: 21180806 ETIM: EC011860 Core specifications Cutting diameter: 40 mm Shank diameter: 32 mm Number of cutting edges: 5 Cutting length: 40 mm Overall length: 200 mm Weight: 1.395 kg Compatibility & features For indexable inserts: 4NKT06 Compatible inserts manufacturer: Taegutec Torx screw: M3x6,5 Torx key: T8 SKU: S477-2TM FAQ How many cutting edges does the tool have? The S477-2TM is equipped with five cutting edges, designed to sustain continuous milling and to allow multiple reindexes before a full insert replacement is needed. Which inserts fit this holder? This tool accepts 4NKT 0603 indexable inserts and is specified as compatible with Taegutec inserts of that designation. What are the main dimensions to consider for setup? Key dimensions include a 40 mm cutting diameter, a 32 mm shank diameter and a 200 mm overall length; the cutting length is 40 mm and the tool weight is 1.395 kg. How are the inserts secured to the cutter? Inserts are secured with an M3x6.5 Torx screw; assembly and removal are performed using a T8 Torx key for consistent and rapid indexing. Is this tool suitable for heavy-duty machining? The combination of a rigid 32 mm shank and multiple cutting edges makes the cutter suitable for demanding production tasks where stability and tool life are priorities. What should be considered during insert replacement? When changing inserts, use the specified T8 key and M3x6.5 screw; ensure screws are torqued to the toolholder manufacturer's recommendation and that the seating surface is clean before reuse. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Cutter For ADMT 1204 Indexable Inserts 5 Flutes 90° Cutting Angle 50mm Cutting Length 150mm Overall - Teknik Makina
Take advantage of a robust 32 mm shank and a 40 mm cutting diameter to increase material removal rates while maintaining stable toolholding; the design accepts ADMT 1204 indexable inserts for fast changeovers and consistent results. Order the cutter via Metav Werkzeuge or contact the consultants for specification matching and application advice. Shank milling cutter S506TM – indexable-insert cutter with 40 mm diameter and 32 mm shank by Teknik Makina Shank milling cutter S506TM designed for heavy-duty milling tasks with ADMT 1204 indexable inserts, suitable for shoulder and face milling in industrial production Solid shank 32 mm for stable clamping 40 mm cutting diameter for broad material removal Compatible with ADMT 1204 indexable inserts Includes M3x7 Torx clamp screw and T8 key Consistent clamping for accurate finishing A stable toolholder is crucial for repeatable results; the 32 mm shank of this milling cutter delivers secure clamping that reduces vibration and runout. With a mass of 0.968 kg, the tool maintains balance during machining, which supports improved surface quality and prolonged insert life. This means fewer rework cycles and more predictable production throughput for workshops focused on reliability. High removal capacity with controlled engagement The cutter’s 40 mm diameter combined with a 50 mm cutting length enables efficient material removal on wide faces and shoulders. The geometry provides a 90° cutting angle, ideal for square shoulder milling where perpendicular faces are required. Equipped with 5 cutting edges, the tool distributes cutting loads to maintain steady power consumption and reduces the need for frequent index changes, delivering measurable productivity gains on suitable machines. Fast insert changes and secure fixation Engineered for indexable inserts ADMT 1204, the holder is compatible with inserts from Walter, offering flexibility in supply and grade selection. Insert clamping uses an M3x7 Torx screw and a T8 key, allowing quick and secure replacements with consistent seating. This straightforward clamping concept reduces downtime during tool servicing and supports a predictable setup routine on the shop floor. Designed for industrial applications and durable performance The cutter addresses general milling tasks in metalworking environments where robust performance is required. Its 150 mm overall length and balanced construction make it suitable for both roughing and semi-finishing operations where users prioritise stability and repeatability. As part of Teknik Makina’s cutting tool range, the tool aligns with standard workshop practices and integrates easily into existing tooling systems. Contact Metav Werkzeuge to discuss fitment, request detailed machining recommendations for Teknik Cutting Tools' S506TM shank milling cutter, or obtain a tailored quotation; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S506TM Description: Shank milling cutter for ADMT 1204 indexable inserts Facts Diameter: 40 mm Shank diameter: 32 mm Cutting length: 50 mm Overall length: 150 mm Cutting edges: 5 Cutting angle: 90° Weight: 0.968 kg Special features Compatible inserts: ADMT 1204 Compatible insert manufacturer: Walter Clamp screw: M3x7 Torx Key: T8 Suitable for shoulder and face milling FAQ Which inserts fit this cutter? The shank milling cutter accepts ADMT 1204 indexable inserts; it is compatible with inserts from Walter and intended for those standard insert geometries. What are the main dimensions of the tool? The cutter has a 40 mm diameter, 32 mm shank, 50 mm cutting length and 150 mm overall length (SKU S506TM). Is the clamp screw and key supplied? Yes, the tool is supplied with an M3x7 Torx clamp screw and requires a T8 key for insert clamping and replacement. Which operations is the tool best suited for? The cutter is optimised for shoulder and face milling where a 90° cutting angle is needed; it is suitable for roughing and semi-finishing tasks in production environments. How can tool life be maximised? For the S506TM shank cutter, correct speeds, feeds and stable clamping are essential; using the appropriate insert grade for the workpiece material and ensuring secure seating with the M3x7 screw will extend service intervals. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Cutter For APKT 1604 Indexable Inserts 4 Flutes 25mm Shank 45mm Cutting Length, 90° - Teknik Makina
Benefit from efficient material removal, secure Torx clamping and broad compatibility with APKT 1604 indexable inserts for uninterrupted production. Order directly via Metav Werkzeuge or consult our specialists for application advice. S264TM Shaft milling cutter – Ø40 mm, 4 flutes (Teknik Makina) The S264TM is a shaft milling cutter engineered for face and shoulder milling using APKT 1604 indexable inserts, optimised for robust performance in production workshops. Solid 25 mm shank diameter Suitable for APKT 1604 indexable inserts Ø40 mm cutting diameter Includes M4x10 Torx clamping screw Stability and precision for consistent results The tool delivers reliable performance through a Ø40 mm cutting diameter and 4 flutes, which together provide a balance between material removal rate and surface finish. A 25 mm shank increases rigidity in the holder, reducing vibration and enhancing repeatability across batches. Compatibility with indexable inserts means insert geometry and grades can be selected to match different steels or aluminium alloys, enabling a predictable cutting process and consistent component quality. Quick insert change and secure clamping reduce downtime Clamping is handled by an M4x10 Torx screw and a T15 key interface, ensuring fast, repeatable insert changes and a positive locating position for every tool change. The secure clamping arrangement minimises micro-movement under load, improving tool life and reducing rework. This practical configuration supports shorter setup times and higher machine uptime, translating into measurable productivity gains on the shop floor. Versatile compatibility that supports workshop efficiency With a 45 mm cutting length and 120 mm overall length, the cutter is suited to a wide range of shoulder and face milling tasks; the 90° cutting angle provides square shoulder capability for accurate step formation and pocket walls. The tool is supplied ready for APKT 1604 inserts and is compatible with Korloy insert grades commonly stocked in industrial workshops. At 0.547 kg, the assembly offers straightforward handling and good balance for stable spindle operation. Together, these attributes make the cutter a practical choice for manufacturers seeking efficient, dependable milling with minimal adjustments. For tailored application recommendations or to secure the Teknik Cutting Tools S264TM for the next production run, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our technical advisors will assist with insert selection and clamping setup Technical data Article number: S264TM Brand: Teknik Makina Fits inserts: APKT 1604 Compatible with: Korloy Facts Shank diameter: 25 mm Cutting diameter: 40 mm Cutting length: 45 mm Overall length: 120 mm Number of cutting edges: 4 Weight: 0.547 kg Clamping screw: M4x10 Torx key size: T15 Cutting angle: 90° Special features Shaft milling cutter design For APKT 1604 indexable inserts Suitable for face and shoulder milling Brand: Teknik Makina FAQ What insert type does the cutter accept? The cutter accepts APKT 1604 indexable inserts; Teknik Cutting Tools designed the tool for this insert format to ensure reliable seating and chip control. Is the tool compatible with Korloy inserts? Yes, the S264TM is compatible with Korloy insert grades, allowing use of commonly available chipbreaker and grade combinations. What are the shank and cutting diameters? The shank diameter is 25 mm and the cutting diameter is 40 mm, providing a stable connection to the tool holder for accurate milling. How is the insert secured on the cutter? Inserts are secured with an M4x10 Torx clamping screw; a T15 Torx key is specified for tightening to the correct torque. Which milling operations is this cutter best suited to? The tool is optimised for face and shoulder milling where a 90° cutting angle and a 45 mm cutting length are required for square shoulders and efficient material removal. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Cutter For APKT 1604 Indexable Inserts 4 Flutes 55mm Cutting Length, 32mm Shank - Teknik Makina
Combining a robust Ø 40 mm cutting diameter with a four‑flute geometry and a shank Ø 32 mm for stable clamping, this tool delivers reliable material removal and reduced vibration; the 350 mm overall length provides the reach required for deeper setups. Order the shank milling cutter directly via Metav Werkzeuge or ask the consultants for machining recommendations. Shank milling cutter S456TM – Ø 40 mm, 4 flutes by Teknik Makina A shank milling cutter S456TM designed for indexable‑insert milling with APKT 1604 inserts, suited to shoulder and face milling where secure clamping and repeatable insert changes are needed 40 mm cutting diameter Four cutting edges for even material removal Shank Ø 32 mm for stable clamping Compatible with APKT 1604 inserts Reliable indexable‑insert system for predictable productivity The cutter body is engineered to accept APKT 1604 indexable inserts and is compatible with Korloy insert variants, enabling fast insert changes and stocked spare parts strategies. A secure clamping interface using Torx M4x10 screws with a T15 key provides repeatable seating and minimises downtime during tool replacement. This construction supports consistent cutting performance and simplifies maintenance planning for production runs. Stable cutting performance through balanced geometry With a Ø 40 mm cutting diameter and 4 flutes, the tool offers a balanced chip load that is well suited to steady material removal and reduced harmonic excitation. The shank Ø 32 mm ensures firm retention in the spindle or holder, while the 90° cutting angle provides clean shoulder faces and predictable axial forces. The combination of these dimensions reduces the risk of chatter and contributes to improved surface quality on the workpiece. Extended reach while maintaining rigidity An overall length of 350 mm combined with a 55 mm cutting length permits access to recessed features and longer setups without resorting to multiple extensions. Despite the extended reach, the robust tool mass (approx. 2.375 kg) supports rigidity at the cutting zone, helping to keep tolerances tight and tool life consistent. The modular nature of the insert system also means that consumables can be optimised for cost‑efficiency without replacing the entire tool body. Specification guidance and workshop reliability As part of a pragmatic machining strategy, this cutter integrates with common insert inventories and workshop toolholders, reducing the number of special components required. Metav’s experience in precision tools supports selection of the correct insert grade and chipformer for the intended material and cycle time targets. The documented choice of clamping hardware and standard insert format enables straightforward stock management and predictable replenishment. Consult Metav Werkzeuge for a tailored recommendation on Teknik Cutting Tools' S456TM shank milling cutter and for assistance selecting the correct APKT 1604 inserts; call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data SKU: S456TM Brand: Teknik Makina Designation: Shank milling cutter for APKT 1604 indexable inserts Core data Cutting diameter: 40 mm Shank diameter: 32 mm Cutting length: 55 mm Overall length: 350 mm Number of edges: 4 Weight: 2.375 kg Cutting angle: 90° Special features Compatible with APKT 1604 indexable inserts Suitable insert manufacturer: Korloy Clamping screw: M4x10 Torx Torx key size: T15 FAQ Which insert type fits this cutter? The cutter accepts APKT 1604 indexable inserts; Korloy APKT 1604 grades are compatible as specified for the tool body. How is an insert secured in the tool? Inserts are retained with a Torx M4x10 clamping screw tightened with a T15 key to ensure repeatable seating and safe clamping. What machining tasks suit this tool? The geometry and 90° cutting angle make it suitable for shoulder and face milling operations where a Ø 40 mm tool and a four‑flute arrangement provide a balance of material removal and surface finish. Does the tool provide sufficient reach for recessed features? Yes; the 350 mm overall length with a 55 mm cutting length allows access to deeper pockets and extended setups while maintaining rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Cutter for APKT 1705 Indexable Inserts 4 Teeth, 300mm Overall Length - Teknik Makina
Take advantage of a compact combination of high metal-removal capacity and straightforward serviceability: the shank design and indexable insert system reduce downtime while delivering consistent cutting performance. Order the tool directly via Metav Werkzeuge or consult our specialists for application guidance. 40 mm Shank Milling Cutter S670TM — for APKT 1705 indexable inserts (Teknik Makina) 40 mm shank milling cutter S670TM designed for heavy-duty milling with APKT 1705 indexable inserts in industrial metalworking. 40 mm cutting diameter for robust removal Compatible with APKT 1705 indexable inserts 32 mm shank diameter for enhanced rigidity Secure clamping with M4x10 Torx screws Increased throughput with a proven insert system The combination of a 40 mm cutting diameter and 4 cutting edges provides a clear productivity advantage in series milling operations. Fewer passes are needed to remove bulk material, which shortens cycle times and increases throughput on horizontal and vertical milling centres. The use of indexable inserts means inserts are replaced rather than the entire cutter, lowering recurring tooling costs and simplifying inventory management. Fast, reliable insert changes that minimise downtime This shank milling cutter accepts APKT 1705 indexable inserts and uses M4x10 Torx screws with a T15 key, ensuring positive seat engagement and repeatable clamping force. Indexable geometry enables quick rotation or replacement of inserts when an edge is worn, preserving cutting geometry and surface finish without lengthy regrinding procedures. The modular approach supports consistent part quality across production batches. Rigidity and control for stable machining A 32 mm shank diameter combined with a 300 mm overall length keeps the tool suitably rigid for demanding cuts while allowing the reach necessary for many component geometries. The solid construction, reflected in the tool mass of 1.882 kg, helps damp vibration under load and maintain cutting stability. Greater stiffness translates into improved tool life for inserts and more reliable dimensional tolerances on finished components. Workshop-ready design and supply-chain confidence Delivered as SKU S670TM, this tool is produced by Teknik Makina and is compatible with inserts from Taegutec, offering flexibility in consumable sourcing. The cutter’s straightforward mechanical design integrates easily into existing toolholders and clamping systems, and the Torx interface reduces the risk of incorrect fastening. Metav Werkzeuge supports operational continuity with transparent logistics and industrial-grade quality control, helping workshops scale production without compromising precision. Contact Metav Werkzeuge for a tailored recommendation on integrating the S670TM into production or for advice on insert selection — info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: S670TM Manufacturer: Teknik Makina Product type: Shank milling cutter Compatible inserts: APKT 1705 Compatible insert supplier: Taegutec Facts Cutting diameter: 40 mm Overall length: 300 mm Shank diameter: 32 mm Insert pocket depth (shank length cutting): 60 mm Number of cutting edges: 4 Weight: 1.882 kg Torx key: T15 Torx screw: M4x10 Special features Indexable insert system Robust shank for vibration control Designed for industrial metalworking Delivered as precision-machined assembly SKU for ordering and inventory: S670TM FAQ Which inserts fit this milling cutter? The cutter accepts APKT 1705 indexable inserts; supplier-tested compatibility includes inserts from Taegutec for reliable cutting performance. What torque and key are required for the screws? The cutter uses M4x10 Torx screws and requires a T15 key for secure clamping and repeatable seating of inserts. Is the shank suitable for standard toolholders? The 32 mm shank diameter is compatible with clamping systems designed for that diameter; the tool integrates with common holders used in industrial milling. How does the tool support uptime in production? By using indexable inserts and standardised screws, the S670TM allows fast insert changes and predictable replacement cycles, reducing machine downtime and simplifying spare-part logistics. Who manufactures the tool and what is the SKU for ordering? The tool is manufactured by Teknik Makina and supplied as SKU S670TM, which should be quoted when ordering or requesting technical data. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; eMail: info@metav-werkzeuge.com
40mm Cutter For APKT1604 Indexable Inserts 25mm Shank 45mm Cutting Length 90° Cut 4 Flutes, M4x10 Torx T15 - Teknik Makina
Benefit from the combination of robust shank dimensions and indexable-insert compatibility to secure stable, repeatable milling results in daily production. Order the tool directly via Metav Werkzeuge or consult the technical team for precise pairing and setup advice. Shank milling cutter for APKT 1003-1604 Indexable Inserts – 40 mm dia, 25 mm shank (Teknik Makina) The Shank milling cutter for APKT 1003-1604 Indexable Inserts is a purpose-built insert milling cutter intended for efficient face and peripheral milling where quick insert changes and consistent cutting geometry are required. 40 mm cutting diameter 25 mm shank diameter Compatible with APKT1604 inserts Four cutting edges for smooth removal Consistent cutting performance for predictable results The tool is designed to deliver a reliable cutting pattern using a 40 mm diameter and 4 cutting edges, which together promote balanced material removal and reduced cutting forces. The 90° cutting geometry yields a defined shoulder finish and helps maintain dimensional accuracy during face milling operations. For users evaluating cycle time, the combination of cutter diameter and edge count supports higher material removal rates while preserving surface quality. The physical balance and mass distribution of the tool contribute to vibration damping, which results in fewer rework cycles and a steadier machining process. Secure clamping and straightforward insert handling Retention and repeatability are supported by a robust fastening arrangement: an M4x10 Torx screw with a T15 Torx key secures the indexable insert, ensuring consistent seat location and torque control. Compatibility with APKT1604 indexable inserts simplifies stock management and allows quick replacement during shift changes. For production environments where tool changeover speed matters, the standardised insert format and straightforward clamping reduce downtime and make insert rotation or replacement a routine, low-risk operation. Optimised geometry for workshop integration With a 25 mm shank, 45 mm cutting length, and 120 mm overall length, the cutter is sized for stability in common toolholders while still providing sufficient reach for many milling tasks. The listed 0.516 kg mass contributes to tool rigidity without imposing excessive spindle load, which is important for maintaining spindle life and consistent spindle dynamic behaviour. The tool’s dimensions are compatible with typical milling setups, supporting integration into existing tool lists where repeatability and simple tool management are priorities. Practical application guidance and production benefits The cutter is suitable for workshop and industrial settings that require dependable insert milling with standard APKT insert geometries. Compatibility with inserts from established manufacturers such as YG-1 helps to reduce logistics complexity and secures replacement availability. Specifying this cutter supports predictable cycle times, simplified tooling inventory and a clear maintenance routine for insert inspection and rotation. If a machining strategy requires assessment, technical consultation can be sought to establish optimal feeds, speeds and insert grades for particular materials and component tolerances. Contact Metav Werkzeuge for tailored advice on selecting the right Teknik Cutting Tools shank milling cutter and the optimal APKT1604 insert pairing to maximise production uptime Technical data Article number: S046TM Manufacturer: Teknik Makina Name: Shank milling cutter Description: for APKT 1003-1604 Indexable Inserts eClass: 21180806 ETIM: EC011860 Numbers Diameter: 40 mm Shank diameter: 25 mm Cutting length: 45 mm Overall length: 120 mm Number of cutting edges: 4 Weight: 0.516 kg Cutting angle: 90° Special features Compatible insert: APKT1604 Compatible insert manufacturer: YG-1 Torx screw: M4x10 Torx key size: T15 For APKT 1003-1604 indexable inserts FAQ What insert type fits this milling cutter? The cutter is designed for APKT1604 indexable inserts and accepts APKT 1003–1604 sizes as specified for secure seating and correct cutting geometry. Which manufacturers’ inserts are compatible? Compatibility is confirmed with YG-1 inserts; the cutter accepts APKT1604 inserts from standard suppliers, facilitating procurement and stocking. What is the shank diameter and why does it matter? Shank diameter is 25 mm; a solid shank of this diameter delivers greater rigidity in the holder, reducing deflection and improving dimensional stability in the machined component. Is the fastening method industry standard? Yes; the insert is secured with an M4x10 Torx screw requiring a T15 key, a common and reliable method that ensures repeatable clamping torque and precise insert location. Can this cutter be used for both face and peripheral milling? The cutter’s 90° cutting angle and multiple cutting edges make it suitable for defined shoulder and face milling operations where repeatable geometry and a consistent surface finish are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Cutter For APMT 1604 Indexable Inserts 25mm Shank 45mm Cutting Length, 90° - Teknik Makina
Benefit from stable, cost-efficient indexable milling thanks to the combination of a 40 mm cutter diameter, a rigid 25 mm shank and compatibility with APMT 1604 inserts; this pairing supports consistent material removal and straightforward insert changes. Order the tool via Metav Werkzeuge or consult their technical team for application-specific guidance. S250TM Indexable milling cutter — 40 mm Ø, for APMT 1604 inserts (Teknik Makina) The S250TM is an indexable milling cutter designed for machining with APMT 1604 indexable inserts, offering a compact overall length and secure Torx fastening for reliable clamping in repetitive milling operations. Indexable cutter for APMT 1604 inserts 40 mm diameter with 4 cutting edges 25 mm shank for secure clamping M4x10 Torx fastening, T15 key High material removal rate with controlled stability The tool’s 40 mm diameter and 4 cutting edges enable efficient metal removal while maintaining process stability. A 90° cutting angle ensures axial engagement that is easy to predict for programming and cycle-time calculation. Because the cutter accepts standard APMT 1604 indexable inserts, insert replacement avoids full-tool regrinding and reduces operating costs; worn edges are exchanged quickly, restoring cutting performance without extended downtime. The balanced geometry supports repeatable passes and helps to keep tolerance scatter low during batch production. Secure clamping and straightforward insert handling With a 25 mm shank and a 45 mm cutting length, the design combines rigidity with sufficient reach for many pocketing and face-milling tasks. The insert seats are secured by an M4x10 Torx screw and require a T15 key, giving a compact, repeatable clamp that resists loosening under typical milling loads. Compatibility with Korloy APMT 1604 inserts simplifies procurement and makes it straightforward to source replacements. The indexable system means edge geometry is preserved and operators can explain insert seating and torque procedures without specialist tooling knowledge. Lower tool cost and lighter tool-change cycles A modest mass of 0.544 kg and a total length of 120 mm reduce toolchanger loads and can help to shorten tool-change times in automated machines. By using indexable inserts rather than solid-carbide cutters, the cutter reduces per-edge cost and shortens maintenance intervals — an economic benefit for medium- to high-volume workshops. The combination of standard insert format and familiar Torx fastening supports predictable servicing and helps maintain uptime, while the cutter’s straightforward geometry allows planners to calculate feeds, speeds and engagement angles with established formulas. For tailored advice on integrating the S250TM into production or to confirm suitability for specific materials, contact Metav Werkzeuge — Metav’s specialists in precision tools will recommend the optimal insert grade and clamping practice and can be reached at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: S250TM Manufacturer: Teknik Makina Name: Indexable milling cutter for APMT 1604 indexable inserts Compatible insert manufacturer: Korloy Torx screw: M4x10, Torx key: T15 Dimensions / core data Diameter: 40 mm Cutting length: 45 mm Overall length: 120 mm Shank diameter: 25 mm Number of cutting edges: 4 Cutting angle: 90° Weight: 0.544 kg Features / special characteristics For APMT 1604 indexable inserts Secured with M4x10 Torx fastening Compatible with Korloy insert range Indexable design for rapid insert changes FAQ What insert size does this cutter accept? The S250TM cutter is designed for APMT 1604 indexable inserts; the seats and clamping torque are matched to that format. Which insert manufacturers are compatible with the S250TM? The cutter is compatible with Korloy APMT 1604 inserts and other inserts produced to the same indexable standard. What shank and overall dimensions are relevant for toolholding? The tool has a 25 mm shank, a 45 mm cutting length and a 120 mm overall length, which should be verified against machine toolholder reach and clearance. What fastener and torque tool are required for insert changes? Insert seats use an M4x10 Torx screw and require a T15 key for secure clamping. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Cutter For APMT 1604 Indexable Inserts 4 Flutes 55mm Cutting Length, 90° - Teknik Makina
Benefit from precise, cost‑effective indexable milling: the combination of a 32 mm shank for rigidity and a 40 mm cutter diameter for efficient material removal delivers stable machining and reduced vibration; order directly via Metav Werkzeuge or consult the technical team for application advice. S251TM Shaft Milling Cutter by Teknik Makina – 40 mm Diameter · 32 mm Shank (for APMT 1604 Inserts) The S251TM is a shaft milling cutter tailored for versatile face and slot milling using APMT 1604 indexable inserts, suited to industrial and workshop CNC applications. 40 mm cutter diameter for broad material removal 32 mm hardened shank for high rigidity Compatible with APMT 1604 indexable inserts Four cutting edges for balanced machining Reliable performance for high‑productivity milling The S251TM is engineered to deliver consistent results in series production and jobbing shops. With a 32 mm shank and a 40 mm diameter, the tool provides a stable cutting platform that reduces chatter and enables higher material removal rates. The four flutes guarantee even load distribution, which improves surface finish and tool life. Where cycle time and repeatability matter, this cutter contributes to predictable machining results through its rigid design and balanced geometry. Economical indexable system and quick insert changes Designed for APMT 1604 indexable inserts, the cutter offers an economical approach to tool management: insert replacement is faster and less costly than resharpening solid tools. The cutter retains inserts with an M4x10 Torx screw, tightened with a T15 key, ensuring reliable clamping and straightforward maintenance. Less downtime for tooling changes means increased uptime on the machine, and compatibility with Korloy inserts widens sourcing options for supplies and grades. Application scope and machining advantages This milling solution excels in general face milling and light slotting across common industrial alloys when correct cutting data are applied. The 90° cutting angle supports square shoulder operations and efficient side cutting. The tool’s attributes make it particularly suitable for work requiring a balance of material removal and surface quality; hard finishing or heavy roughing should be planned according to insert geometry and machine power to preserve tool life. Practical design for workshop integration Handling and mounting have been considered: the cutter’s 150 mm overall length and 55 mm cutting length allow comfortable reach while maintaining rigidity close to the spindle. At a weight of 1.294 kg, it is straightforward to fit and balance in standard toolholders. The combination of mechanical clamping via the Torx screw and proven insert form factors simplifies inventory and training requirements, supporting efficient production workflows. For tailored advice on integrating the Teknik Makina S251TM into production workflows, contact Metav Werkzeuge for technical guidance and rapid supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: S251TM Manufacturer: Teknik Makina Diameter: 40 mm Shank diameter: 32 mm Cutting length: 55 mm Overall length: 150 mm Cutting edges: 4 Cutting angle: 90° Weight: 1.294 kg Compatible inserts: APMT 1604 Compatible insert manufacturer: Korloy Torx screw: M4x10 Torx key: T15 Design: shaft milling cutter for indexable inserts FAQ Which inserts fit this cutter? The S251TM accepts APMT 1604 indexable inserts; Korloy grades are listed as compatible and common industry grades can be selected for application needs. How is the insert secured? Inserts are fixed with an M4x10 Torx screw, tightened using a T15 key, which provides reliable clamping suitable for standard milling forces. What operations is this cutter best suited to? The tool is designed for face milling and light slotting where a 90° cutting angle and four cutting edges provide balance between productivity and surface quality. What are the key dimensions for toolholder selection? Important dimensions: 32 mm shank diameter, 40 mm cutter diameter, 55 mm cutting length and 150 mm overall length — select a holder compatible with a 32 mm shank. Is the cutter suitable for heavy roughing? Heavy roughing demands consideration of insert grade, machine power and cutting parameters; the S251TM offers rigidity, but optimum performance for heavy cuts requires matching insert geometry and speed/feed settings. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Cutter For APXT 1003 Indexable Inserts 90° Cutting Angle, 5 Flutes, 25mm Shank Diameter - Teknik Makina
Take advantage of a robust combination of precision geometry and simple serviceability: the cutter’s Ø 40 mm cutting diameter and shank Ø 25 mm provide stable performance in demanding milling tasks, while compatibility with indexable inserts reduces downtime and tooling costs. Order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Shank milling cutter S172TM – for APXT 1003 indexable inserts, Ø 40 mm, 5 flutes (Teknik Makina) The Shank milling cutter S172TM is a dedicated tool for industrial milling with APXT 1003 indexable inserts, designed for efficient face and shoulder milling where rapid insert changes and consistent chip control are required. Ø 40 mm cutting diameter Shank Ø 25 mm for secure clamping 5 cutting edges for uniform load distribution Stable cutting performance with fewer tool changes The tool’s Ø 40 mm cutting diameter combined with a shank Ø 25 mm gives increased rigidity that reduces vibration and improves surface finish during heavy-light milling cycles. Fitted with APXT 1003 indexable inserts, the system enables quick insert replacement and predictable cutting behaviour, which translates into measurable reductions in setup time and higher process uptime. The geometry supports controlled chip evacuation and steady tool life for repetitive production runs. Secure clamping and straightforward maintenance Clamping is achieved via a Torx fastener system (screw M2.5×5.5), using a Torx T8 key for safe and repeatable tightening. This simple fastening arrangement ensures secure insert retention under load and allows fast intervention during index changes or tool inspection. Compatibility with Korloy inserts and a standardised Torx interface means maintenance routines are short and tooling logistics can be standardised across workshops. Built for production: predictable handling and repeatability With an overall length 120 mm, a cutting length 40 mm and 5 cutting edges, the cutter balances accessibility for deep slots and the stiffness required for shoulder milling; the specified 90° cutting angle is optimised for square shoulder operations. The assembled unit’s weight 0.606 kg contributes to a balanced feel in the spindle while providing sufficient mass to damp minor vibrations. The S172TM integrates into existing toolholder systems without complex adaptations, offering a pragmatic route to higher productivity and consistent component quality. For a tailored assessment of the Teknik Cutting Tools S172TM and to arrange supply directly from Metav Werkzeuge, contact our advisors at Metav Werkzeuge for application-specific recommendations and fast delivery from Emmerich. Technical data Article number: S172TM Manufacturer: Teknik Makina Designation: Shank milling cutter for APXT 1003 indexable inserts Compatible inserts: APXT 1003 Compatible insert manufacturer: Korloy Numbers / Core technical data Shank diameter: 25 mm Cutting diameter: 40 mm Cutting length: 40 mm Number of cutting edges: 5 Overall length: 120 mm Weight: 0.606 kg Cutting angle: 90° Designs / Special features Torx screw: M2.5×5.5 Torx key required: T8 Suitable for indexable inserts APXT 1003 Five-flute geometry for balanced cutting FAQ Which inserts fit this cutter? The cutter is designed for APXT 1003 indexable inserts; it is compatible with APXT 1003 inserts produced by Korloy and similar suppliers. What are the main dimensions of the tool? The S172TM features a cutting diameter of 40 mm, a shank diameter of 25 mm, a cutting length of 40 mm and an overall length of 120 mm. How many cutting edges does the tool have and what is the cutting angle? The tool uses 5 cutting edges and a 90° cutting angle, optimised for shoulder and face milling operations. Which fastening hardware is required for insert retention? Insert retention uses a Torx screw sized M2.5×5.5; a T8 Torx key is specified for tightening and removal. Is the S172TM suitable for heavy production environments? Yes, the S172TM is built with robust geometry and standardised insert fixation to support repetitive industrial milling tasks with predictable tool life and short maintenance intervals. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Cutter Holder for RDMT 12T3 Indexable Inserts 32mm Shank, 45mm Cutting Length, 3 Flutes - Teknik Makina
Take advantage of a compact, indexable milling solution that pairs compatibility with RDMT 12T3 inserts and a 32 mm shank for secure clamping — the result is reliable chip removal and repeatable tool life. Order the tool directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. Shank cutter R242TM — indexable milling cutter, Ø 40 mm, 3 cutting edges (Teknik Makina) A robust shank milling cutter designed for high-production jobs, the Shank cutter R242TM is suited for installations using RDMT 12T3 indexable inserts and engineered for stable, repeatable machining. Ø 40 mm cutting diameter Compatible with RDMT 12T3 inserts 32 mm shank diameter for secure clamping 45 mm effective cutting length Productive indexable milling that reduces cycle time The R242TM delivers a balanced combination of diameter and cutting geometry that supports efficient material removal with the flexibility of indexable inserts. With a Ø 40 mm cutter body and three cutting edges, this design reduces downtime for edge changes and keeps spindle loads predictable. The use of RDMT-style inserts means tooling costs are controlled through repeatable insert life and straightforward reconditioning, which supports leaner production cycles and a better cost-per-part ratio. Stable clamping and straightforward maintenance for consistent accuracy A 32 mm shank provides increased rigidity and improved run-out stability in most machine tool holders, while the 45 mm cutting length offers a practical balance between reach and structural support. The cutter’s fastening hardware — a locking screw M3,5, a Torx screw M3,5x8,5 and a T15 key — ensures fast, secure insert mounting and simplifies service routines. At approximately 0.956 kg, the tool is sufficiently robust for industrial use while remaining easy to handle during tool changeovers. Flexible application through indexable insert technology Designed specifically for use with RDMT 12T3 indexable inserts, the R242TM allows quick adaptation to different cut conditions simply by choosing the appropriate insert grade and geometry. This flexibility turns the cutter head into a modular solution for a range of machining tasks where insert-based strategies are preferred, enabling selective investments in carbide grades and coatings without replacing the entire tool body. The result is a future-proof approach to process planning and inventory optimisation. Supply reliability and workshop partnership with Metav Sourcing the cutter via Metav Werkzeuge connects the product capabilities with a service model focused on reliable European supply and technical guidance. Metav’s stock and quality procedures act as a practical “quality filter” for workshop buyers, reducing uncertainty about tool origin and batch consistency. As a companion to the tool itself, this service layer supports operational planning and ensures access to the required spare parts and consumables in continuing production runs. For a practical discussion on integrating the R242TM into existing tool setups, contact Metav Werkzeuge to arrange procurement or application advice directly from Emmerich — email info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data SKU: R242TM Manufacturer: Teknik Makina Compatible inserts: RDMT 12T3 eClass: 21180806 ETIM: EC011860 Data Cutting diameter: 40 mm Shank diameter: 32 mm Cutting edges: 3 Effective cutting length: 45 mm Overall length: 150 mm Weight: 0.956 kg Special features Locking screw: M3,5 Torx screw: M3,5x8,5 Torx key: T15 Designed for indexable inserts Files available in product migration data FAQ Which inserts are compatible with this cutter? The cutter is compatible with RDMT 12T3 indexable inserts; selecting the appropriate insert grade will tailor the R242TM’s performance to the machining task. What shank size is required for safe clamping? A 32 mm holder or collet is recommended to achieve the rigidity intended for this tool and to maintain consistent run-out during operations. How many cutting edges does the tool use and what is the benefit? The tool employs three cutting edges, which provides a compromise between feed rate potential and chip load distribution, supporting steady removal rates with reduced vibration. Is the cutter suitable for heavy-duty milling applications? The robust shank and indexable design of the R242TM make it suitable for many production scenarios where insert-based machining is standard; insert selection and machine stability determine final capacity. What fastening components are supplied with the tool? The tool uses a locking screw (M3,5) and Torx screw (M3,5x8,5) secured with a T15 key to mount inserts securely and facilitate quick changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Cutter Holder for XNKT 0805 Indexable Inserts, 4 Flutes, 32mm Shank - Teknik Makina
Combine productivity with simple maintenance: an indexable milling cutter offering fast insert changes and stable clamping for consistent material removal. Order directly via Metav Werkzeuge or consult the specialists for application advice. S844TM – Indexable shank milling cutter, Ø 40 mm, 4‑flute by Teknik Makina The S844TM is a shank-mounted indexable cutter designed for milling operations using XNKT 0805 indexable inserts, suitable for use on machining centres and milling heads. Compatible with XNKT 0805 indexable inserts Ø 40 mm cutter diameter for medium‑duty milling 4 flutes for balanced chip evacuation Shank Ø 32 mm for secure clamping Efficient material removal with economical inserts The tool is engineered as an indexable cutter to combine high material removal rates with straightforward maintenance. With a Ø 40 mm cutting diameter and 4 flutes, the geometry promotes steady cutting forces and improved surface finish under stable machining conditions. The use of indexable inserts means only the insert needs replacing once worn, which reduces downtime and lowers long‑term operating costs compared with solid‑carbide alternatives. For production environments where tool change frequency affects throughput, this modular approach supports predictable process planning and easier tool management. Robust clamping and secure fastening for reliable use A shank Ø 32 mm provides a rigid connection between tool and spindle, helping to reduce vibration and extend insert life. The cutter is secured with a Torx M4x10 screw, tightened with a T15 Torx key, ensuring repeatable seating of the insert and consistent cutting performance. The system’s mechanical simplicity aids maintenance routines: insert indexation and screw torque are the primary service actions, allowing technicians to restore cutting capacity quickly and with minimal specialist equipment. Compatibility with Korloy insert geometries also ensures a broad supply of replacement inserts. Practical advantages for the workshop and production floor This indexable design supports flexible application planning: inserts can be selected for specific workpiece materials or surface requirements without changing the whole cutter. The overall length 130 mm and balanced flute count allow installation in standard toolholders while maintaining a compact envelope for many milling set‑ups. For buyers seeking to streamline tooling inventories, the combination of a common insert format and a standard shank diameter reduces the number of distinct tool types required across jobs, simplifying stocking and ordering processes. For milling tasks that demand both serviceability and stability, request Teknik Makina’s S844TM from Metav Werkzeuge — contact Metav Werkzeuge in Emmerich for detailed technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number / SKU: S844TM Manufacturer: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Facts Diameter: 40 mm Overall length: 130 mm Shank/clamping diameter: 32 mm Cutting edges / flutes: 4 Torx screw: M4x10 Torx key size: T15 Special features Compatible with XNKT 0805 indexable inserts Compatible insert supplier: Korloy Indexable, shank-mounted milling cutter Suitable for use on machining centres and milling heads FAQ Which inserts fit this cutter? The cutter accepts XNKT 0805 indexable inserts; Korloy‑compatible geometries are supported for straightforward replacement. What is the correct fastening specification for insert change? Insert retention uses a Torx M4x10 screw tightened with a T15 Torx key to ensure secure and repeatable clamping. What shank size is required in the toolholder? The tool requires a toolholder with a 32 mm clamping diameter to achieve the intended rigidity and balance. How many cutting edges does the cutter provide and what is the benefit? The cutter features 4 flutes, offering balanced cutting forces and improved chip evacuation for consistent surface quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm End Mill For ADKT 1706 Indexable Inserts With Internal Coolant, 32mm Shank - Teknik Makina
Take advantage of a robust cutter body that combines stable shank support and internal coolant for consistent milling results; the clear compatibility with ADKT 1706 indexable inserts and Korloy supply ensures quick tool changes and predictable performance — order directly via Metav Werkzeuge or consult our specialists for tailored advice. Shank milling cutter for ADKT 1706 indexable inserts (40 mm) by Teknik Makina Shank milling cutter for ADKT 1706 indexable inserts designed for secure, repeatable face and shoulder milling in industrial workshops 40 mm diameter cutter body Internal coolant for improved chip evacuation Compatible with ADKT 1706 Korloy inserts 32 mm shank, 130 mm overall length Engineered for dependable, high-precision milling The Shank milling cutter S067TM is a purpose-built cutter body that brings dimensional stability and predictable cutting performance to repetitive milling tasks. With a 40 mm diameter and a 32 mm shank, the tool offers a rigid connection to the holder, reducing vibration and improving surface finish when compared with less rigid assemblies. The cutter accepts ADKT 1706 indexable inserts (compatible with Korloy), so insert changes are fast and tool life management becomes a simple maintenance routine. Three cutting edges distribute load and allow balanced chip removal during shoulder and face operations. Coolant-fed design that reduces downtime and improves edge life Built with internal coolant, the cutter directs fluid to the cutting zone to optimise cooling and chip evacuation. This targeted flushing helps to keep insert temperature lower and chips clear of the cutting edge, which contributes to longer service intervals and steadier surface quality. The head secures inserts with an M4x10 Torx screw that is tightened with a T15 key, simplifying routine exchange and minimising unproductive machine time. Clear mechanical fastening and coolant support together reduce the likelihood of unexpected tool-change events, supporting continuous production runs. Practical dimensions and workshop integration for easy setup With a 130 mm overall length, 50 mm cutting length and a tool weight of 0.75 kg, the cutter body balances reach and rigidity for common milling set-ups. Its 32 mm shank fits standard toolholders for this class of cutter, allowing straightforward integration into existing tool inventories. Marked as S067TM, the component is supplied ready for insert mounting and immediate use once the correct insert geometry is fitted. Spare parts such as the Torx key and M4x10 screws are standard items in most maintenance trolleys, so assembly and upkeep remain efficient and predictable. For reliable milling components from Teknik Makina and support directly from Metav Werkzeuge, contact our technical team for procurement and application guidance at info@metav-werkzeuge.com or +49 2822 7131930 — Metav ensures dependable supply from Emmerich with industry-grade quality controls Technical data SKU: S067TM Manufacturer: Teknik Makina Product type: Shank milling cutter Dimensions & weight Diameter: 40 mm Overall length: 130 mm Shank diameter: 32 mm Cutting length: 50 mm Number of cutting edges: 3 Weight: 0.75 kg Compatibility & features Indexable inserts: ADKT 1706 Compatible insert manufacturer: Korloy Internal coolant: yes Torx key: T15 Torx screw: M4x10 FAQ Can ADKT 1706 inserts be used with this cutter? Yes. The shank milling cutter accepts ADKT 1706 indexable inserts and is listed as compatible with Korloy insert variants for straightforward replacement. Does the tool support coolant-through operation? Yes. The cutter body features internal coolant to direct fluid to the cutting zone, improving chip evacuation and insert life. What shank size and holder are required? The cutter has a 32 mm shank and is intended for holders that accept a 32 mm diameter shank; the overall length is 130 mm for setup planning. How are inserts fixed and replaced? Inserts are secured with an M4x10 Torx screw and require a T15 key for removal and fitting, ensuring quick and reliable exchange. What is the product reference for ordering spare parts? The unit is stocked as S067TM; use this SKU when enquiring about the cutter body or matching Torx screws and replacement components. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm End Mill For APKT 1604 Indexable Inserts 4 Flutes 55mm Cutting Length, 90° - Teknik Makina
Take advantage of a robust 40 mm cutting diameter, secure Torx M4x10 clamping and compatibility with APKT 1604 indexable inserts to increase uptime and machining consistency; order directly via Metav Werkzeuge or consult our specialists for application advice. Shaft milling cutter S283TM — insert milling cutter body for APKT 1604 indexable inserts (Teknik Makina) The Shaft milling cutter S283TM is a precision-engineered milling body for indexable APKT 1604 inserts, designed to deliver stable cutting performance and quick insert changes in demanding production and workshop environments Compatible with APKT 1604 indexable inserts 40 mm cutting diameter for robust removal Four cutting edges for balanced operation Torx M4x10 clamping screw with T15 key Stable rigidity for consistent surface quality The tool body provides a combination of diameter and shank proportions that prioritise stability during milling operations. With a 40 mm cutting diameter and a shank Ø 32 mm, the design reduces vibration and deflection, which yields a more consistent surface finish and longer insert life. The presence of four cutting edges contributes to a balanced cutting action that spreads cutting forces evenly; this is particularly beneficial when repeatability and dimensional reliability are required on serial parts. Fast insert replacement and predictable operating costs Designed around the widely used APKT 1604 insert form, the cutter allows for swift indexable insert changes that reduce downtime. The clamping system uses a Torx M4x10 screw and a T15 key for secure retention and repeatable seating of the insert. Indexable inserts mean that only the insert is replaced when wear occurs, lowering tooling costs per component and simplifying inventory: spare inserts are far less expensive to stock than complete cutters. Workshop-ready dimensions and handling benefit productivity The milling body measures 200 mm overall length with a 55 mm cutting length, providing a practical reach for many shoulder and face milling tasks while remaining manageable in setup. At 1.296 kg the assembly balances mass and handling convenience for manual mounting and machine tool changeovers. The compact package supports efficient tool management in busy machine shops and integrates smoothly into standard toolholding systems that accept a shank of Ø 32 mm. For tailored application guidance and reliable supply of Teknik Makina tooling, contact Metav Werkzeuge — Metav’s specialists in precision measurement and tooling can advise on insert grades, clamping torque and stocking options via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: S283TM Manufacturer: Teknik Makina Brand: Teknik Cutting Tools SKU / UID: S283TM Eclass: 21180806 ETIM: EC011860 Technical facts Cutting diameter: 40 mm Shank diameter: 32 mm Number of cutting edges: 4 Cutting length (shaft): 55 mm Overall length: 200 mm Weight: 1.296 kg Cutting angle: 90° Features & compatibility Compatible insert type: APKT 1604 Compatible insert manufacturer: Korloy Clamping screw: M4x10 Torx Required Torx key size: T15 Indexable-insert milling cutter body Files available: 2 (product documentation) FAQ What insert type fits this cutter? This cutter accepts APKT 1604 indexable inserts; compatibility with Korloy inserts is specified for straightforward procurement and interchangeability. How is the insert secured in the cutter body? The insert is retained with a Torx M4x10 clamping screw; use a T15 key for correct seating and repeatable clamping. Is the cutter suitable for shoulder and face milling? Yes, the tool body’s geometry and 55 mm cutting length make it suitable for common face and shoulder milling operations where APKT 1604 inserts are applicable. What are the key dimensions for toolholder selection? Important dimensions are shank Ø 32 mm, cutting diameter 40 mm and overall length 200 mm; these values help in selecting compatible toolholders and extensions. How does the cutter improve tool-change efficiency? By using indexable inserts (APKT 1604), only the insert needs replacement when worn, reducing downtime and lowering tool expenditure compared with solid-tool replacements. Manufacturer: Teknik Cutting Tools; Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm End Mill For APKT 1604 Indexable Inserts 90° Cutting Angle, 4 Flutes, 55mm Cutting Length - Teknik Makina
Take advantage of the combination of robust compatibility with APKT 1604 inserts, stable shank design and efficient chip evacuation for reliable milling performance. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. Shank milling cutter S274TM — for APKT 1604 indexable inserts, Ø 40 mm Shank milling cutter S274TM is an indexable-insert tool designed for efficient face and slot milling where quick insert changes and consistent cutting geometry are required Compatible with APKT 1604 indexable inserts Ø 40 mm cutting diameter for medium-duty milling Shank Ø 32 mm for secure toolholding Four cutting edges with 90° cutting angle Consistent cutter geometry for predictable results The tool offers a stable cutting geometry that supports repeatable machining cycles and predictable surface quality. With a Ø 40 mm cutter body and four cutting edges, the design reduces vibration and evens out tool load, which helps to maintain dimensional accuracy on serial parts. The use of indexable inserts provides quick restoration of cutting performance: a worn edge is replaced faster than regrinding, which shortens machine downtime and contributes to a more economical production rhythm. Secure mounting and simple maintenance for workshop uptime A shank Ø 32 mm ensures firm clamping in standard toolholders and contributes to repeatable concentricity in multi-spindle setups. The tool is supplied for use with APKT 1604 inserts and includes standard fixing elements (Torx screw M4x10, Torx key T15) for straightforward insert changes. The practical assembly reduces set-up time and lowers the risk of assembly errors, so cycle starts are faster and maintenance remains low-effort — a clear advantage for busy fabrication environments. Broad application range and material compatibility Designed as a versatile milling solution, the cutter is suitable for typical industrial machining tasks where indexable inserts are preferred. The four-flute arrangement and 90° cutting angle allow efficient slotting and face milling operations while balancing cutting forces. Compatibility with Korloy APKT 1604 inserts opens access to a wide range of grades for different materials and cutting conditions, enabling adaptation to productivity or finish-focused requirements without changing the tool body. Contact Metav Werkzeuge today for expert guidance from Emmerich on deploying the Teknik Makina S274TM in production — our consultants can verify insert choices, clamping suitability and delivery options to match specific machining needs Technical data Article number: S274TM Manufacturer: Teknik Cutting Tools Product: Shank milling cutter For: APKT 1604 Indexable Inserts Compatible inserts manufacturer: Korloy Torx screw: M4x10 Torx key: T15 Facts Diameter: 40 mm Shank diameter: 32 mm Cutting length: 55 mm Overall length: 150 mm Cutting edges: 4 Weight: 0.96 kg Cutting angle: 90° Special features Suitable for APKT 1604 indexable inserts Compatible with Korloy inserts SKU S274TM — Teknik Makina FAQ Which insert type fits this cutter? The S274TM shank milling cutter is designed for APKT 1604 indexable inserts and is compatible with Korloy-manufactured inserts in that format. What are the key dimensions to check for toolholder compatibility? Check the shank diameter (32 mm) and the overall length (150 mm) to ensure secure clamping and sufficient reach for the intended operation. How many cutting edges does the tool have and what is their arrangement? The cutter features four cutting edges arranged for stable cutting forces and a 90° engagement geometry suited to face and slot milling. Which fastening parts are supplied for insert mounting? The tool requires a Torx fixing screw M4x10 and a T15 Torx key for insert clamping; these are the specified sizes for secure assembly. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
High-performance shank cutters and ball nose cutters for efficient milling
Insert shank cutters and ball nose cutters combine flexibility and productivity for a wide range of milling tasks. The category covers steel-bodied shank cutters fitted with indexable inserts for economical roughing, face milling, cornering and slotting, as well as ball nose cutters for contouring and 3D finishing.
How these tools work and where they belong
Shank cutters with indexable inserts use a carrier body made from hardened steel; the cutting edges are provided by removable inserts rather than a solid tool blank. Where tools do not have internal coolant, process heat and chips are managed via external coolant nozzles or compressed air, which is sufficient for open, surface-level and easily accessible milling on standard materials. Shank cutters with internal coolant feature fine internal channels that deliver coolant or blasting air directly to each cutting edge under pressure. This targeted supply is essential for deep pockets, cavities, full slotting and machining of heat-resistant or difficult-to-machine materials, because it prevents chip re-cutting, protects cutting edges from thermal overload and enables higher feed rates and improved surface quality.
Cut cycle times and reduce tooling costs
- Replaceable indexable inserts reduce consumable costs and shorten tool change time.
- Targeted internal coolant improves chip evacuation and extends insert life.
- Robust steel carrier bodies enable heavy-duty roughing without frequent tool replacement.
- Suitable for roughing, planing, corner milling and slot milling as well as precision 3D profiling with ball nose cutters.
A practical choice for purchasing and stocking tools
Metav brings a pragmatic purchasing advantage: a broad range of milling solutions is available from a single European quality hub. Metav’s focus on democratising precision means workshops benefit from a wide assortment, consistent quality control from Emmerich and steady supply — supported by decades of expertise and over 48,000 satisfied customers. Choose Metav for a centralised sourcing strategy that reduces supplier complexity while keeping access to both insert milling cutters (also referred to as insert milling cutters or indexable end mills) and ball nose cutters (also known as ball nose end mills or radius cutters) straightforward.
Quick summary
Insert shank cutters and ball nose cutters deliver flexible, cost-effective milling: replaceable inserts lower running costs, and internal coolant options enable higher performance and longer tool life where chip control is critical.
FAQ
When should I choose a shank cutter with indexable inserts rather than a solid carbide end mill?
Choose shank cutters with indexable inserts for economical roughing and high-stock-removal tasks where replacing inserts is preferable to replacing an entire tool; they are especially effective for face milling, cornering and slotting operations.
Does internal coolant make a measurable difference for ball nose cutters?
Yes. Internal coolant directed to each cutting edge reduces chip re-cutting and thermal stress, which improves surface finish and increases insert life when machining deep pockets, cavities or heat-resistant materials.
Can shank cutters without internal coolant be used for general workshop milling?
Absolutely. Tools without internal coolant rely on external coolant nozzles or compressed air and are well suited to open, superficial and easily accessible milling on standard materials.
What milling operations are shank cutters for indexable inserts typically used for?
Shank cutters with indexable inserts excel at economical roughing, planfräsen (face milling), corner milling and slot milling; ball nose cutters are the preferred choice for 3D profiling and finishing operations.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com