Efficient shaft cutters and ball nose cutters for versatile milling
Shaft cutters and ball nose cutters serve as robust rotating tools for roughing, face milling, corner milling and slotting, offering economical replacement of indexable inserts rather than whole solid tools. Available in versions with internal coolant to feed lubricant directly to each cutting edge or without internal coolant relying on external nozzles, these cutters ensure effective chip evacuation and thermal control suited to standard materials or deep pocket and cavity work. By preventing chip re-cutting and protecting cutting edges, they deliver higher feed rates, improved surface finish and extended tool life in demanding metalworking applications.
40mm End Mill for BDMT 1704 Indexable Inserts 4 Flutes, 32mm Shank - Teknik Makina
Take advantage of a robust 32 mm shank and a 40 mm cutting diameter combined with four cutting edges for reliable material removal and consistent surface quality; the compact 120 mm overall length keeps tool overhang low for added stability. Order the tool directly via Metav Werkzeuge or consult the technical team for application-specific advice. Indexable insert milling cutter S584TM — 40 mm diameter, 32 mm shank | Teknik Makina The Indexable insert milling cutter S584TM is an indexable-insert tool holder designed to accept BDMT 1704 inserts for versatile face and shoulder milling in machining centres and milling stations. Indexable holder for BDMT 1704 inserts 40 mm cutting diameter, 4 cutting edges 32 mm shank for stable clamping Torx M4x10 fastening, T15 key Predictable performance through geometry and capacity The holder's geometry is tailored for steady metal removal: a 40 mm cutting diameter and 4 cutting edges yield a balanced cut profile that reduces vibration and spreads wear across multiple edges. The tool's 90° cutting angle provides a true shoulder face and consistent corner quality, which is particularly useful when alternating between roughing and finishing passes. These measurable characteristics enable higher feed rates and reproducible results, which helps to shorten cycle times and improve throughput in production environments. The design supports straightforward calculation of cutting data, so set-up times can be reduced and process windows tightened. Fast changeovers and compatible insert system The clamping system uses an M4x10 Torx screw driven with a T15 key for secure and repeatable insert fastening. It is specified for BDMT 1704 indexable inserts and is compatible with inserts from Kyocera, allowing workshops to use proven grades for specific materials. Since insert grades determine cutting performance, the holder itself provides the stable interface while cutting behaviour is adapted by choosing the right insert geometry and coating. The S584TM therefore enables flexible material coverage with minimal downtime for retooling, as insert replacement requires only simple, standardised tools. Workshop handling, balance and lifecycle benefits With an overall length of 120 mm, a cutting length of 40 mm and a compact 32 mm shank, the tool minimises overhang without compromising reach — a balance that reduces deflection and tool wear. The moderate mass (approx. 0.79 kg) assists in maintaining spindle balance during medium-duty milling, while the shank diameter supports secure clamping in standard holders. Practical features such as standard Torx fastening simplify maintenance and spare-part stocking. Choosing a robust holder like this contributes to longer intervals between balancing and reconditioning, which lowers total machining costs and keeps production running smoothly. Contact Metav Werkzeuge for tailored tool recommendations, availability and application support — Metav Werkzeuge’s team in Emmerich can advise on insert grades and clamping strategies via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: S584TM Manufacturer: Teknik Makina Brand: Teknik Cutting Tools SKU: S584TM ECLASS: 21180806 ETIM: EC011860 Facts Cutting diameter: 40 mm Shank diameter: 32 mm Cutting length: 40 mm Overall length: 120 mm Number of cutting edges: 4 Weight: 0.79 kg Cutting angle: 90° Special features For BDMT 1704 indexable inserts Compatible with Kyocera inserts Torx screw fastening M4x10 Torx key size T15 Indexable insert holder design FAQ What inserts fit this tool? The holder is designed for BDMT 1704 indexable inserts; compatible inserts from Kyocera can be used to suit the machining task. Which screw and key are required to secure inserts? Inserts are fastened with an M4x10 Torx screw using a T15 key for repeatable clamping. What are the key dimensions to check for machine compatibility? Relevant dimensions: 32 mm shank diameter, 40 mm cutting diameter, 120 mm overall length and 40 mm cutting length — confirm spindle or toolholder clearance accordingly. Is the tool suitable for finishing operations? Yes; with appropriate insert selection the toolholder supports finishing as well as roughing, thanks to its 90° cutting angle and balanced multi-edge configuration. How does the holder affect tool change and spare parts inventory? Standard Torx fastening and a common insert form (BDMT 1704) mean faster changeovers and simpler stocking of replacement screws and inserts for efficient workshop logistics. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm End Mill for BDMT 1704 Indexable Inserts With Internal Cooling, 120mm L - Teknik Makina
Take advantage of a rigid shank design and targeted cooling to maintain steady cutting performance across long production runs; the combination of a 40 mm cutting diameter, internal coolant and compatibility with BDMT 1704 indexable inserts keeps setup times low and productivity high. Order the cutter directly via Metav Werkzeuge or request tailored advice from the consultants in Emmerich. Shank milling cutter S584-1TM — 40 mm diameter, internal coolant (Teknik Makina) The Shank milling cutter S584-1TM is a robust insert cutter engineered for face and shoulder milling with BDMT 1704 indexable inserts, offering stable metal removal and short changeover times. 40 mm cutting diameter for stable milling Internal coolant for improved chip evacuation Compatible with BDMT 1704 inserts by Kyocera 32 mm shank with solid clamping stability Reliable performance for demanding milling operations The combination of a 40 mm cutting diameter and 4 cutting edges delivers a balance between material removal rate and surface quality. The 32 mm shank increases stiffness in the holder, reducing chatter and enabling higher feed rates with consistent results. For production environments this means fewer rejected parts and steadier cycle times; operators benefit from predictable tool behaviour and maintenance schedules, while planners gain measurable improvements in throughput and process stability. Efficient cooling and chip control for extended tool life Built-in internal coolant directs fluid to the cutting zone, flushing chips away from the inserts and reducing thermal stress on the cutting edges. This targeted cooling improves tool life and supports better surface finish on aluminium, steel and mixed-material workpieces when matched with suitable inserts. The internal coolant path also lowers the risk of chip re-cutting and abrasive wear, which contributes to longer intervals between indexings and lower total tooling consumption over a batch run. Compatibility and straightforward maintenance for minimal downtime Accepted inserts are BDMT 1704, and the cutter is compatible with inserts from Kyocera, enabling use of widely available grades for roughing and finishing. Fast insert changes are facilitated by the T15 Torx drive and M4x10 screws, which are standard in most maintenance toolkits. With an overall length of 120 mm and a cutting length of 40 mm, the tool offers a compact footprint while maintaining reach for shoulder operations. The modest mass of 0.791 kg simplifies handling and reduces toolholder imbalance when correctly clamped. Practical workshop advantages and suitable applications As an indexable shank cutter, the tool is suited to face milling, light shoulder milling and contouring operations where productivity and repeatability matter. The modular design reduces per-part tooling cost because only the inserts are replaced during wear cycles. For procurement and stock management, Metav’s European logistics base in Emmerich provides a near-market supply channel and quality filtering, which supports reliable reordering and consistent product specification across the workshop. Contact Metav Werkzeuge for specification guidance on the Teknik Makina S584-1TM shank milling cutter and to confirm the ideal insert grade and coolant setup for specific applications; Metav’s consultants can advise on delivery from Emmerich and parts availability Technical data Article number: S584-1TM Type: Shank milling cutter Brand: Teknik Makina Description: for BDMT 1704 Indexable Inserts Label: 40mm shank cutter BDMT 1704 L120mm with internal coolant Facts Cutting diameter: 40 mm Overall length: 120 mm Shank diameter: 32 mm Cutting length (shank): 40 mm Number of cutting edges: 4 Weight: 0.791 kg Torx key: T15 Torx screw: M4x10 eCl@ss: 21180806 Special features Internal coolant: true Compatible insert type: BDMT 1704 Compatible insert manufacturer: Kyocera Product type: Shank milling cutter SKU: S584-1TM FAQ What inserts are suitable for this cutter? The cutter accepts BDMT 1704 indexable inserts; compatible grades from Kyocera can be used for roughing or finishing depending on the workpiece material and cutting data. Does the tool provide internal coolant? Yes, internal coolant is integrated to deliver coolant directly to the cutting zone, improving chip evacuation and prolonging insert life. What are the key dimensions for clamping and setup? Clamping requires a 32 mm shank holder and the cutter has an overall length of 120 mm with a 40 mm cutting diameter, as stated in the technical data. Which drive and screws are required for insert changes? Insert retention uses a T15 Torx drive and M4x10 screws, enabling straightforward replacement with standard workshop tools. Is the cutter suitable for fine finishing? When equipped with an appropriate finishing grade insert, the cutter supports fine finishing operations and improved surface quality due to coolant-assisted cutting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm End Mill for Korloy WNMX 1305 inserts - Teknik Makina
Comprehensive Technical Specifications: Order Number: S801TM Item: End Mill usable with WNMX 1305 Indexable Inserts the Hersteller's Korloy Brand: Teknik Makina Structural Details: Diameter: 40mm Cutting Edges: 3 Total length: 150mm Diameter Connection: 32mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
40mm End Mill for LNMX 1004 Indexable Inserts with Internal Coolant, 200mm Overall Length - Teknik Makina
Benefit from a reliable combination of a 40 mm cutting diameter, internal coolant and compatibility with LNMX 1004 indexable inserts for stable chip evacuation and extended tool life. Order the shank milling cutter directly via Metav Werkzeuge or contact our technical advisers for application support. Shaft milling cutter S097TM – 40 mm diameter, internal coolant (Teknik Makina) Shaft milling cutter S097TM is an indexable shank cutter designed for efficient face and shoulder milling with LNMX 1004 indexable inserts in general machining applications. 40 mm cutting diameter for robust machining Internal coolant for improved chip evacuation Compatible with LNMX 1004 indexable inserts Hex Torx T15 screw system M4x10 Heavy‑duty cutting capacity for consistent performance The tool was developed for demanding milling tasks where stability and repeatability matter. With a 40 mm diameter, 5 cutting edges and a 200 mm total length, the cutter provides a balance between material removal rate and rigidity. The 32 mm shank ensures secure clamping in standard toolholders, reducing vibration and improving surface finish. These mechanical characteristics translate into fewer interruptions for tool correction and a steadier production flow, making the miller suitable for workshop and small‑scale industrial environments. Controlled cooling and secure insert clamping for longer tool life Built‑in internal coolant directs fluid close to the cutting zone to lower temperatures and support chip evacuation, which helps to maintain cutting geometry and prolong insert life. The tool is designed for LNMX 1004 indexable inserts, with a secure Torx fastening system using Torx T15 and M4x10 screws to ensure consistent seating and rapid indexable‑insert changes. Proper coolant routing and reliable clamping reduce thermal cycling and wear, delivering improved process stability and more predictable maintenance intervals. Easy integration and efficiency gains on the shop floor The miller's dimensional design and moderate weight (approx. 1.2 kg) simplify handling while offering the robustness required for repeated operations. Identified under SKU S097TM, the cutter is optimised for quick retrofit into existing tool setups and straightforward insert replacement, which shortens downtime during tool changes. The combination of a rigid 32 mm shank and compact cutting length of 40 mm promotes accurate contouring and consistent results across batches, supporting efficient machining sequences and better use of production capacity. For a tailored recommendation based on Teknik Cutting Tools' internal‑coolant design, contact Metav Werkzeuge to discuss the S097TM shank milling cutter and application compatibility: info@metav-werkzeuge.com | +49 2822 7131930 Key data Article number: S097TM Label: 40mm shank cutter LNMX 1004 L200mm with internal coolant Product type: Shaft milling cutter Manufacturer: Teknik Makina Measurements & core data Cutting diameter: 40 mm Total length: 200 mm Shank diameter: 32 mm Cutting length: 40 mm Number of cutting edges: 5 Weight: 1.2 kg Features & compatibility Internal coolant Compatible with LNMX 1004 indexable inserts Compatible inserts manufacturer: Korloy Torx key: T15 Torx screw: M4x10 FAQ Which indexable inserts fit this shank milling cutter? The cutter is designed for LNMX 1004 indexable inserts; compatible inserts from Korloy are recommended for best fit and performance with the S097TM shank milling cutter. Does the tool provide internal coolant? Yes, the S097TM features internal coolant supply to the cutting zone to support chip evacuation and thermal control during milling. What Torx key and screw are required for insert changes? Insert clamping uses a Torx T15 key and M4x10 screws, ensuring secure and repeatable fastening of LNMX 1004 inserts. What are the key dimensions to consider for toolholder compatibility? Important dimensions are a 32 mm shank diameter, 40 mm cutting diameter and 200 mm total length; these values help to verify holder fit and reach for the required operation. Is the S097TM suitable for quick replacement in production? The cutter is engineered for straightforward insert changes and stable clamping, supporting efficient swap‑outs and shorter machine downtime during maintenance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm End Mill for XEKT 1904 Indexable Inserts Internal Coolant, 160mm Length - Teknik Makina
Take advantage of the combination of robust cutting capacity, reliable internal coolant and precise insert clamping for continuous, cost-efficient milling operations; order the shaft milling cutter directly via Metav Werkzeuge or ask our consultants if technical advice is required. Shaft milling cutter for XEKT 1904 Indexable Inserts — Teknik Makina (40 mm, internal coolant) The shaft milling cutter for XEKT 1904 Indexable Inserts is designed for insert-based milling tasks in production and workshop environments, offering stable cutting performance with integrated coolant supply. 40 mm diameter for robust material removal Internal coolant for improved tool life Compatible with XEKT 1904 inserts (Korloy) High-capacity cutting with precise geometry This insert-based cutter combines a compact head with a generous 40 mm cutting diameter and three cutting edges, delivering balanced chip loads and consistent surface results. The 32 mm shank and a 160 mm overall length provide the necessary stability for interrupted cuts and shoulder milling, while the defined cutting length of 61 mm ensures an efficient engagement zone. Such geometry reduces vibration and enables predictable tool behaviour, which supports higher first-pass yields and lowers rework rates. Coolant-fed design that prolongs service life The integrated internal coolant supply channels coolant directly to the insert rims, which improves heat control at the cutting zone and enhances chip evacuation. Better thermal management reduces edge wear and helps preserve cutting geometry over longer cycles, translating into fewer index changes and reduced production interruptions. For insert systems this means a lower cost per component processed and a more reliable tool life profile in continuous shifts. Secure clamping and proven insert compatibility Designed for XEKT 1904 indexable inserts, compatible with Korloy supply, the cutter uses a secure clamp system tightened with a T15 Torx key and M4x8.5 screws for repeatable seating. The replaceable-insert concept facilitates rapid maintenance: worn inserts can be exchanged within minutes, restoring cutting performance without the need to replace the entire tool body. This serviceability supports efficient shop-floor logistics and helps maintain steady cycle times. Integration into workshop set-ups and practical handling With a mass of 0.955 kg, the tool balances rigidity and manageable handling for tool changes and set-up. The 32 mm shank fits holders and adaptors engineered for standard tool-holding systems, so the cutter can be integrated into milling spindles designed for insert tooling. The combination of robust design, clear mechanical interfaces and internal coolant makes this cutter suitable for production environments seeking stable, repeatable milling performance. For secure, insert-based milling with internal coolant, contact Metav Werkzeuge to procure the Teknik Makina S389TM shaft milling cutter or request tailored technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: S389TM Product: Shaft milling cutter for XEKT 1904 indexable inserts Manufacturer: Teknik Makina SKU: S389TM UID: S389TM Measurements Diameter: 40 mm Overall length: 160 mm Cutting length: 61 mm Shank diameter: 32 mm Weight: 0.955 kg Number of cutting edges: 3 Torx key: T15 Screw: M4x8.5 Features Internal coolant Indexable insert system: XEKT 1904 Compatible insert manufacturer: Korloy Secure Torx clamping FAQ Which inserts fit this cutter? The cutter accepts XEKT 1904 indexable inserts; compatible inserts are available from Korloy and other suppliers offering that insert geometry. Is the tool coolant-fed and how does that help? Yes, the tool features internal coolant that directs fluid to the cutting edge, improving heat control, chip evacuation and overall tool life. What key and screws are required for insert clamping? Insert clamping requires a T15 Torx key and M4x8.5 screws for secure and repeatable seating of each XEKT 1904 insert. What shank size is needed for holder compatibility? The tool has a 32 mm shank, so a tool holder accepting a 32 mm diameter shank is required for correct retention and concentricity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm End Mill for XNKT 0604 Indexable Inserts Internal Coolant, 5 Cutting Edges, 130mm Overall Length - Teknik Makina
Take advantage of the 40 mm cutting diameter, internal coolant and compatibility with Korloy XNKT 0604 indexable inserts for stable production cycles. Order the shank milling cutter directly via Metav Werkzeuge or consult our specialists for precise application advice. Shank milling cutter – 40 mm, internal coolant, for XNKT 0604 inserts (Teknik Makina) Shank milling cutter designed for use with XNKT 0604 indexable inserts, offering coolant-fed performance and a robust Ø32 mm shank for demanding milling tasks Diameter 40 mm for heavy-duty milling Internal coolant for improved tool life Compatible with Korloy XNKT 0604 inserts Shank Ø32 mm, overall length 130 mm Precision fit and secure clamping for repeatable results This cutter body is engineered for a precise fit with Korloy XNKT 0604 indexable inserts, using a five-edge configuration to distribute cutting load evenly and reduce vibration. The design incorporates a Torx fastener system (T8 key, M3x7 screw) to ensure secure clamping and fast insert changes, supporting consistent radial run-out and repeatability. A controlled interface between the insert pocket and the cutter body minimises micro-movements during cutting, which translates into predictable tool life and steady surface quality on workpieces. Coolant-fed design that improves chip control and finish The integrated internal coolant channels direct fluid close to the cutting edge, which helps with chip evacuation, temperature control and lubrication at the contact zone. For operations where chip management and thermal stability matter, the internal feed reduces the risk of built-up edge and improves surface integrity. This coolant-assisted arrangement also supports prolonged insert life and fewer unscheduled tool changes, contributing to greater uptime and lower process cost per component. Robust shank geometry for workshop reliability Built with a 32 mm shank and an overall length of 130 mm, the tool balances rigidity and reach for a wide range of milling set-ups. The cutting head offers a 45 mm effective cutting length and five cutting edges, allowing efficient material removal rates without sacrificing stability. At a mass of 0.865 kg, the assembly is substantial enough for steady cutting while remaining manageable for quick tool exchanges. The result is a cutter suited to repetitive workshop tasks where dependable clamping, easy insert replacement and consistent cutting performance are priorities. For coolant-fed milling solutions by Teknik Makina, contact Metav Werkzeuge in Emmerich for expert advice and procurement: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: S842-1TM Product type: Shank milling cutter for XNKT 0604 indexable inserts Manufacturer: Teknik Makina Facts Diameter: 40 mm Overall length: 130 mm Shank diameter: 32 mm Cutting length: 45 mm Number of cutting edges: 5 Weight: 0.865 kg Torx key: T8 Torx screw: M3x7 Internal coolant: yes Special features Compatibility: Korloy XNKT 0604 inserts Coolant-fed design Torx fastener clamping system Robust shank geometry for stability FAQ Which inserts fit this cutter? The cutter is designed for XNKT 0604 indexable inserts; Korloy inserts in this grade are stated as compatible with the cutter body (SKU S842-1TM). How does the internal coolant affect performance? Internal coolant channels deliver fluid close to the cutting edge, improving chip evacuation, lowering cutting temperatures and helping to extend insert life when using this coolant-fed milling cutter. What fastening system secures the inserts? Inserts are secured with a Torx screw (M3x7) tightened with a T8 key, providing reliable and repeatable clamping for the five-edge cutter configuration. What are the key dimensions to check for machine compatibility? Check the 32 mm shank diameter and the 130 mm overall length against the machine spindle and toolholder capabilities before mounting the cutter. Is this cutter suitable for heavy-duty milling set-ups? The 40 mm diameter combined with a robust shank and coolant supply makes the tool appropriate for demanding milling operations where stability and chip control are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Milling Cutter For R390 1704 Indexable Inserts 90° Cutting Angle, 4 Flutes, 45mm Cutting Length, 32mm Shank - Teknik Makina
Take advantage of a rigid, indexable-insert solution that combines compatibility with Sandvik R390-1704 inserts and straightforward insert clamping for reduced downtime; order directly via Metav Werkzeuge or consult the technical team for application-specific guidance. S518TM — Shank milling cutter for R390-1704 indexable inserts by Teknik Makina, Ø 40 mm, shank Ø 32 mm The S518TM is a shank milling cutter designed for use with R390-1704 indexable inserts, offering robust geometry for demanding CNC milling tasks. Compatible with Sandvik R390-1704 inserts Ø 40 mm cutting diameter Shank Ø 32 mm and 45 mm cutting length Reliable insert system for flexible production The S518TM is engineered as an indexable insert solution, accepting the widely used R390-1704 style by Sandvik, which allows toolshops to balance economy and performance. The insert is secured with a Torx M3.5x8.5 screw operated with a T15 key, a common and robust clamping method that simplifies tool changes and reduces setup time. This arrangement supports fast replacement of cutting edges, keeping machines productive and tooling costs manageable. Geometry that stabilises material removal With a Ø 40 mm cutting diameter and a shank Ø 32 mm, the cutter provides a balance between cutting reach and rigidity; the 45 mm cutting length and 120 mm overall length give defined engagement depth while maintaining stability. The tool features a 90° cutting angle and four cutting edges, which together deliver even load distribution and consistent chip formation. The listed weight of 0.782 kg reflects a solid construction that assists repeatable performance in serial milling applications on CNC machines. Practical handling and production benefits Insert clamping with the specified Torx screw provides secure retention and straightforward maintenance, helping to keep throughput high in production environments such as toolrooms and milling centres. As a modular cutting tool, the solution lowers per-part costs because only inserts are replaced, not the entire cutter body. The design is therefore suited to workshops aiming for efficiency, predictable tool life and straightforward inventory management. For tailored technical advice or to arrange procurement of the Teknik Makina S518TM, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility, delivery and application support. Technical data SKU: S518TM Manufacturer: Teknik Makina Designation: Shank milling cutter for R390 1704 indexable inserts Suitable for inserts: R390-1704 Compatible insert supplier: Sandvik Facts Cutting diameter: 40 mm Shank diameter: 32 mm Cutting length: 45 mm Overall length: 120 mm Number of cutting edges: 4 Cutting angle: 90° Weight: 0.782 kg Special features Torx screw for insert clamping: M3.5x8.5 Torx key size: T15 Indexable insert system: R390-1704 Brand: Teknik Makina FAQ Which inserts fit this cutter? The S518TM accepts R390-1704 style indexable inserts, specified for use with Sandvik-compatible insert geometries. What are the key dimensions of the tool? The cutter has a 40 mm cutting diameter, 32 mm shank diameter, 45 mm cutting length and 120 mm overall length; weight is 0.782 kg. How are inserts secured in the cutter? Inserts are clamped with a Torx M3.5x8.5 screw, tightened or loosened using a T15 Torx key for quick and secure changes. For which applications is the cutter intended? The tool is designed for CNC milling operations that use indexable inserts and require a 90° cutting angle and the flexibility of replaceable cutting edges. Is this cutter compatible with Sandvik inserts? Yes, the S518TM is listed as compatible with Sandvik R390-1704 inserts and is prepared for their standard clamping hardware. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Shank Cutter For APKT 1604 Indexable Inserts 32mm Shank, 70mm Cutting Length, 4 Flutes, 90° Cutting Angle - Teknik Makina
Optimise milling processes with a focus on stability and fast insert changes: robust 32 mm shank, a 70 mm cutting length for deep engagement, and compatibility with APKT 1604 indexable inserts. Order the component directly via Metav Werkzeuge or consult our specialists for machining advice. S450TM Shank Milling Cutter for APKT 1604 Indexable Inserts – Ø 40 mm, 32 mm shank (Teknik Makina) The S450TM is a shank milling cutter engineered for secure clamping and efficient indexable-insert milling in general workshop and light-industrial applications. Ø 40 mm cutting diameter 32 mm solid shank for stable clamping 70 mm cutting length for deep engagement Compatible with APKT 1604 inserts (Korloy) Stable clamping for consistent machining results The tool body delivers high stability through a 32 mm solid shank and an overall length engineered for balance; this reduces unwanted vibration and supports repeatable tolerances on serial parts. With a Ø 40 mm cutting diameter and a 90° cutting geometry, the design promotes an even load distribution across the cutting edges, which helps to achieve a consistent surface finish and prolongs tool life. These attributes translate into fewer scrapped parts and a more predictable production rhythm. Fast insert changes and predictable service intervals Designed to accept APKT 1604 indexable inserts, the cutter uses a standard Torx clamping system (M4x10 screw, T15 key) for rapid, repeatable insert replacement. Indexable inserts allow the cutting edge to be renewed without replacing the entire tool body, cutting overall tooling costs and downtime. The ergonomic clamping layout shortens maintenance steps and simplifies regrinding cycles at the insert level, which benefits workshops aiming to keep machines productive with minimal intervention. Application-focused geometry that supports throughput Featuring four cutting edges and a 70 mm cutting length, the cutter is suited to operations requiring extended axial engagement while maintaining chip control and dimensional stability. The 300 mm overall length and a weight of 1.922 kg have been balanced to suit spindle-holding systems frequently found in production mills, enabling stable feed rates and reduced chatter. For manufacturers prioritising output and process reliability, this configuration supports higher feed capacities without compromising surface quality. Contact Metav Werkzeuge for application advice and reliable supply of Teknik Cutting Tools shank milling cutters; phone +49 2822 7131930 or email info@metav-werkzeuge.com for tailored recommendations. Technical data SKU: S450TM Manufacturer: Teknik Makina Article description: Schaftfräser for APKT 1604 Indexable Inserts Core specifications Diameter: 40 mm Shank diameter: 32 mm Cutting length: 70 mm Number of cutting edges: 4 Overall length: 300 mm Cutting angle: 90° Weight: 1.922 kg eCl@ss: 21180806 ETIM: EC011860 Features & compatibility Compatible inserts: APKT 1604 Matched insert manufacturer: Korloy Torx screw: M4x10 Torx key size: T15 Files available: ID 62de7e5bbd24461b3d5f7a30, 62de7eeba9cff922f4703d57 FAQ Is this cutter compatible with APKT 1604 inserts? Yes. The S450TM is designed specifically for APKT 1604 indexable inserts and is matched to Korloy insert geometry for secure seating and repeatable performance. What are the main dimensions and weight of the tool? The cutter has a Ø 40 mm cutting diameter, a 32 mm shank, 70 mm cutting length, 300 mm overall length and weighs 1.922 kg. Which screw and key are required to clamp the inserts? Insert clamping is performed with an M4x10 Torx screw and is tightened using a T15 Torx key. Who manufactures the cutter and who is responsible for supply in Europe? The tool is produced by Teknik Makina; for supply and distribution in Europe Metav Werkzeuge handles responsibility and logistics. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Shank Cutter for RDMT 1003 Indexable Inserts 4 Cutting Edges 45mm Cutting Length 150mm Overall Length - Teknik Makina
Take advantage of the combination of robust clamping, replaceable indexable inserts and a compact overall length for efficient machining cycles; the tool’s Ø 40 mm cutting diameter and RDMT 1003 compatibility ensure predictable performance. Order the cutter directly via Metav Werkzeuge or consult the technical team for application advice. R208TM indexable milling cutter – Ø 40 mm, 4‑flute (Teknik Makina) R208TM is an indexable milling cutter designed for medium‑duty milling tasks using RDMT 1003 inserts, combining a secure shank with easy insert replacement for reduced downtime. Compatible with RDMT 1003 indexable inserts Ø 40 mm cutting diameter Four cutting edges for balanced performance Shank Ø 32 mm for secure clamping Consistent cutting performance for productive milling The body is engineered to deliver steady metal removal while preserving surface quality. With a Ø 40 mm cutting diameter and four cutting edges, the tool provides a balance between material removal rate and surface finish — ideal for repeatable operations on production runs. The indexable design allows worn inserts to be replaced quickly, minimising machine idle time and lowering per‑part tooling cost. Emphasis on predictable chip evacuation helps maintain cycle times and process stability. Secure clamping and clear mounting benefits A solid shank Ø 32 mm ensures reliable clamping in standard toolholders, reducing run‑out and vibration during operation. The overall length of 150 mm and a cutting length of 45 mm give a compact but capable tool geometry that suits both tight setups and conventional milling stations. Fastener specifications such as M3.5 locking screw and M3.5x8.5 Torx screw (Torx key T15) support secure insert fastening and straightforward maintenance procedures. Practical compatibility and everyday usability This cutter is specified for use with RDMT 1003 indexable inserts, enabling straightforward selection of insert grades for different applications. The replaceable insert system simplifies inventory management: one cutter body can serve multiple cutting tasks by changing insert grades for wear resistance or chip control. The tool’s design supports efficient changeover and keeps tooling complexity low in busy workshops. Durability and workshop integration Weighing approximately 0.967 kg, the cutter offers a robust feel without excessive mass, aiding handling and tool balance. The construction supports routine workshop practices: quick insert replacement, standard Torx maintenance, and compatibility with established clamping systems. When combined with Metav’s supply chain and quality control, this cutter contributes to uninterrupted production and dependable stock availability for professionals. For specific cutting parameters, insert grade recommendations or to arrange purchase and delivery via Metav Werkzeuge, please contact Metav Werkzeuge’s specialists for personalised assistance and immediate availability information. Technical data SKU: R208TM Brand: Teknik Makina Designation: indexable milling cutter for RDMT 1003 indexable inserts ECLASS: 21180806 ETIM: EC011860 Dimensions & performance Cutting diameter: 40 mm Shank diameter: 32 mm Cutting length: 45 mm Overall length: 150 mm Number of cutting edges: 4 Weight: 0.967 kg Special features & mounting Compatible inserts: RDMT 1003 Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key size: T15 Manufacturer SKU uid: R208TM FAQ What inserts are compatible with this cutter? The R208TM cutter is specified for RDMT 1003 indexable inserts; these can be selected in suitable grades for the desired wear resistance and chip control. How is the cutter clamped in the spindle? Clamping relies on the shank Ø 32 mm dimension; standard toolholders for a 32 mm shank are recommended to maintain concentricity and minimise run‑out. Can the inserts be changed on the shop floor? Yes — the cutter uses replaceable indexable inserts secured by an M3.5 locking screw and M3.5x8.5 Torx screw (Torx key T15) for quick, workshop‑friendly replacement. What machining tasks suit this tool best? The body’s Ø 40 mm diameter and four cutting edges make it suitable for general milling operations where RDMT 1003 inserts are appropriate, offering a compromise between material removal rate and surface finish. Is the cutter supplied by a recognised manufacturer? The R208TM is produced by Teknik Makina and supplied with commercial distribution and support via Metav Werkzeuge for reliable delivery to European workshops. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Shank Cutter For RDMT 1003 Indexable Inserts 45mm Cutting Length, 25mm Shank Diameter - Teknik Makina
Take advantage of a precision tool that pairs compatibility with RDMT 1003 indexable inserts, a stiff 25 mm shank and a 40 mm cutting diameter to maintain steady production rates with quick insert changes; order via Metav Werkzeuge or consult our technical advisers for specification matching. Shank milling cutter for RDMT 1003 indexable inserts – 40 mm diameter, 25 mm shank (Teknik Makina) A Shank milling cutter engineered to accept RDMT 1003 indexable inserts for robust milling tasks in workshop and production environments. 40 mm cutting diameter 25 mm shank diameter 45 mm cutting length Compatible with RDMT 1003 inserts Reliable indexable-insert performance for fewer tool changes The design is centred on efficient indexable-insert use: by accepting RDMT 1003 inserts, the tool permits rapid insert交換 (indexing and replacement) without removing the holder from the spindle, which reduces downtime and inventory of full-profile cutters. Indexable solutions provide a cost-effective approach to maintain cutting quality because worn cutting edges are replaced rather than discarding the entire tool. The tool’s compatibility with standard insert geometry makes it simple to source replacements and to use existing toolholding strategies. Rigidity and repeatability that support consistent surface quality A 25 mm shank and robust body geometry deliver the rigidity needed for stable cutting, especially at a 40 mm diameter and with 4 flutes. The 45 mm cutting length balances capacity for material removal with stiffness to limit chatter. Insert clamping is handled by a M3.5 locking screw and a corresponding M3.5x8.5 Torx screw, tightened with a T15 key, ensuring secure seating and repeatable positioning of the insert. Together these features translate into predictable tool behaviour, improved repeatability and reduced rework in serial production. Practical handling and serviceability for workshop workflows The assembly is straightforward to maintain: the insert fastening uses conventional Torx hardware for quick exchange and reliable torque transfer. With an overall length of 120 mm and a nominal weight of 0.558 kg, the holder is easy to balance in standard spindles and straightforward to store alongside other indexable tooling. The combination of standard fasteners and recognised insert form factor minimises spare-part complexity and supports quick turnaround during shift changes or preventive maintenance. For technical advice, stock checks or to secure this Teknik Cutting Tools shank milling cutter compatible with RDMT 1003 inserts, contact Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com — our specialists will advise on integration into existing toolsets and delivery options Technical data Article number: R198TM Name: Shank milling cutter for RDMT 1003 Indexable Inserts Manufacturer: Teknik Makina Facts Diameter: 40 mm Cutting edges: 4 Shank diameter: 25 mm Cutting length: 45 mm Overall length: 120 mm Weight: 0.558 kg Special features Suitable for inserts: RDMT 1003 Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 SKU: R198TM FAQ Which indexable inserts fit this holder? The holder is designed for RDMT 1003 indexable inserts; these inserts are the specified geometry for correct seating and secure clamping. How is the insert secured in the cutter? Insert clamping is achieved with a M3.5 locking screw and a M3.5x8.5 Torx screw, tightened using a T15 key to ensure repeatable and safe clamping. What are the key dimensions to consider for machine setup? Key dimensions are 40 mm diameter, 25 mm shank diameter, 45 mm cutting length and 120 mm overall length; the tool weight is 0.558 kg for balance considerations. Is this tool suitable for high-volume production? Yes; by using indexable inserts (RDMT 1003) and standardised fasteners, the tool supports quick insert changes and consistent cutting performance appropriate for serial production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Shank Cutter for RPMW 10T3 Indexable Inserts, 4 Flutes, 150mm Overall Length - Teknik Makina
Take advantage of robust rigidity and fast indexable-insert changes: the combination of a 32 mm shank for stability, a 40 mm cutting diameter and secure Torx clamping ensures consistent machining performance and reduced setup time. Order the milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Indexable shank milling cutter R321TM — for RPMW 10T3 indexable inserts, rigid 32 mm shank A versatile indexable milling cutter designed for insert-based face and peripheral milling, combining compact dimensions with secure Torx clamping for reliable production use. 40 mm cutting diameter 32 mm shank diameter For RPMW 10T3 indexable inserts Torx clamping M3.5×8.5, key T15 Stability and repeatable accuracy for demanding operations The R321TM is built around a robust 32 mm shank and a compact 150 mm overall length, providing high stiffness that reduces vibration and deflection during milling. This inherent rigidity leads to improved surface finish and extended insert life, which in turn lowers rework and tooling costs. With a 40 mm cutting diameter and balanced geometry, the tool supports stable chip evacuation and predictable cutting forces. Such mechanical stability is particularly beneficial where consistent dimensional tolerances and repeatable cycle times are required in a production environment. Fast, secure indexable-insert changes to minimise downtime Designed for RPMW 10T3 inserts, the holder uses a proven clamping system that relies on a M3.5×8.5 Torx screw and a T15 driver for positive, repeatable seating. The combination of standardised insert geometry and secure fastening enables quick tool servicing and predictable torque application, reducing changeover time and the risk of incorrect clamping. Compatibility with Korloy inserts broadens availability of cutting grades and geometries, allowing straightforward optimisation of cutting parameters for different materials and machining strategies. Application fit and supply reliability for workshops and production This indexable cutter is suited to job shops and production lines that favour modular tooling over solid-carbide alternatives, offering cost-effective tool refresh through replaceable insert edges. With 4 cutting edges, the tool balances material removal capability and tool life for general milling tasks where RPMW 10T3 inserts are appropriate. Backed by Metav’s supply chain and quality filter in Emmerich, the product benefits from dependable availability and technical support. The combination of standardised components and a reputable distributor makes the cutter a pragmatic choice for teams aiming for stable process chains and predictable procurement. For a precise discussion on integrating the Teknik Cutting Tools R321TM into current tooling layouts or to order directly from Metav Werkzeuge, please contact our sales team for tailored advice and reliable delivery coordination. Technical data Article number: R321TM Brand: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Dimensions and core data Cutting diameter: 40 mm Shank diameter: 32 mm Overall length: 150 mm Number of cutting edges: 4 Compatibility and fastening For RPMW 10T3 indexable inserts Compatible insert manufacturer: Korloy Torx screw: M3.5×8.5 Torx key size: T15 FAQ What insert type fits this milling cutter? The holder accepts RPMW 10T3 indexable inserts; it is specified for this insert geometry to ensure correct seating and cutting performance. Which insert brands are compatible with the tool? The cutter is compatible with Korloy RPMW 10T3 inserts; equivalents from other manufacturers with the same ISO geometry will also fit. What are the key dimensions that affect rigidity? Primary dimensions are a 32 mm shank and a 150 mm overall length; the 32 mm shank increases stiffness for improved stability during milling. How is the insert clamped and what tool is required? Inserts are secured with a M3.5×8.5 Torx screw; a T15 Torx driver is required for correct torque and repeatable clamping. Is this cutter suitable for heavy material removal? With 4 cutting edges and a 40 mm diameter, the tool is suited to general-purpose milling where RPMW 10T3 inserts are appropriate; final suitability depends on insert grade and machining parameters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Shank End Mill For ADMT 1606 Indexable Inserts 90° Cutting Angle, 32mm Shank Diameter - Teknik Makina
Take advantage of a rigid, high-performance milling solution that combines a 40 mm cutting diameter with a 32 mm shank for secure clamping and consistent chip evacuation; the tool accepts ADMT 1606 indexable inserts and comes with a Torx fixing (M4x10, T15) for fast, repeatable insert changes — order directly via Metav Werkzeuge or consult our specialists for application advice. Schaftfräser S470TM — shank milling cutter, Ø 40 mm, for ADMT 1606 indexable inserts by Teknik Makina The Schaftfräser S470TM is a shank milling cutter designed to carry ADMT 1606 indexable inserts for efficient face and slot milling across general machining tasks Compatible with ADMT 1606 inserts Ø 40 mm cutting diameter Shank Ø 32 mm for secure clamping Four cutting edges for high material removal Stable cutting performance for repeatable machining The S470TM is built around a 40 mm cutting diameter and a robust 32 mm shank that together provide axial and radial stability during milling. With a 60 mm effective cutting length and a 200 mm overall length, the tool balances reach and rigidity to reduce vibration and improve surface quality. The geometry is set at a 90° cutting angle, ensuring predictable engagement and straightforward surface generation. These characteristics support steady cycle times and low scrap rates in production environments where repeatability matters. Fast insert changes and secure clamping to reduce downtime Designed for indexable-insert operation, the cutter accepts ADMT 1606 plates and uses a Torx fixing (M4x10) tightened with a T15 key for consistent seat and clamping force. The modular concept of the toolholder allows rapid replacement of worn inserts without regrinding, shortening maintenance intervals and keeping spindle time productive. Compatibility with well-known insert suppliers such as Walter aids logistics and reduces tooling mix-up, simplifying procurement and inventory management for workshops and production lines. Efficient material removal, manageable weight and reliable handling Equipped with 4 cutting edges, the milling cutter offers a balance between chip load and feed rates that suits many general machining operations. The tool’s mass of 1.31 kg contributes to steadiness in the cutter assembly without imposing excessive load on the spindle. The combination of multiple cutting edges and secure fixing permits higher material removal rates compared with single-edged solutions, while insert-based tooling reduces per-edge tooling costs and facilitates predictable tool life monitoring. For technical advice, application matching or a tailored supply proposal for the Teknik Makina S470TM, contact Metav Werkzeuge to discuss integration into existing tool systems or to request a specification sheet from our Emmerich-based specialists Technical data Article number: S470TM Manufacturer: Teknik Makina Facts Cutting diameter: 40 mm Shank diameter: 32 mm Cutting length: 60 mm Total length: 200 mm Number of cutting edges: 4 Cutting angle: 90° Weight: 1.31 kg Torx screw: M4x10 Torx key size: T15 Special features Compatible insert type: ADMT 1606 Compatible insert manufacturer: Walter Designed for indexable-insert milling Delivered as shank milling cutter (shaft design) FAQ Which insert type fits this milling cutter? The S470TM is designed for ADMT 1606 indexable inserts; the mounting seats and geometry match that insert format. How many cutting edges does the tool have? This shank milling cutter features 4 cutting edges, optimised for balanced chip removal and steady feed. What are the key dimensions to check for toolholder compatibility? Key dimensions are 40 mm cutting diameter and 32 mm shank diameter; total length is 200 mm and cutting length is 60 mm. Which fastening parts are used for the inserts? Inserts are secured with a Torx screw M4x10 and require a T15 key for tightening and repeatable clamping. Is the tool compatible with inserts from other manufacturers? The S470TM is specified for ADMT 1606 inserts and is noted as compatible with inserts supplied by Walter, aiding flexibility in sourcing Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Shank End Mill For TNKT 1105 Indexable Inserts With Internal Coolant, 4 Flutes - Teknik Makina
Benefit from the combination of a 40 mm shank, through-body internal coolant and direct compatibility with TNKT 1105 indexable inserts for steady, productive milling; order or consult Metav Werkzeuge for delivery and technical advice. Milling cutter body for TNKT 1105 indexable inserts — 40 mm shank, internal coolant (Teknik Makina) A robust milling cutter body for TNKT 1105 indexable inserts, engineered for stable, repeatable milling with integrated coolant supply and a 40 mm shank suitable for industrial clamping systems. Robust 40 mm shank for stable clamping Internal coolant supply for improved chip evacuation Compatible with TNKT 1105 inserts (Korloy) Four cutting edges for balanced milling Stable clamping for precise machining results A large-diameter shank ensures reduced vibration and improved concentricity during heavy cuts. The 40 mm shank and overall length 130 mm combine to deliver a rigid setup that keeps tool deflection to a minimum, which results in consistent surface finish and dimensional accuracy. For production environments where cycle-time and repeatability matter, the enhanced stability translates into fewer rejects and less rework. Through-body cooling to prolong tool life and improve productivity The integrated internal coolant directs cutting fluid close to the cutting zone, lowering temperatures and aiding chip evacuation. This reduces thermal wear on the inserts and helps maintain cutting geometry for longer intervals, so insert life is extended and tool-change frequency falls. For shops aiming to optimise tool costs and maintain higher average cutting speeds, effective coolant delivery is a decisive technical advantage. Secure clamping and rapid insert changes to reduce downtime Secure fastening is provided by the Torx screw system specified for the cutter head. The use of Torx T8 interface for the fastening tool and the M3x7 screw type enables controlled torque application and repeatable clamp force during insert replacement. Combined with the balanced design and four cutting edges, the cutter body supports quick, reliable indexable-insert swaps, keeping machine downtime to a minimum. Engineered for versatile milling tasks in industrial workshops The body accepts TNKT 1105 indexable inserts from Korloy, making it a flexible choice across a range of roughing and semi-finishing operations where indexable tooling is preferred. The construction supports robust chip flow and stable cutting performance, suitable for series production as well as demanding job-shop applications. The design emphasises predictable behaviour under load, which assists process planners in achieving consistent cycle times. Contact Metav Werkzeuge to check availability and technical suitability for Teknik Makina 40 mm cutter bodies with internal coolant; our team in Emmerich can advise on cutting parameters and delivery options Technical data SKU: S058TM Manufacturer: Teknik Makina Product type: Milling cutter body Fits inserts: TNKT 1105 Compatible insert brand: Korloy Core technical figures Diameter: 40 mm Shank diameter: 40 mm Overall length: 130 mm Cutting length: 40 mm Cutting edges: 4 Weight: 1.112 kg Special features Internal coolant: yes Torx key size: T8 Torx screw: M3x7 Category: Shaft milling cutters ECLASS: 21180806 FAQ Which inserts are compatible with this cutter body? The cutter body accepts TNKT 1105 indexable inserts; compatibility with Korloy-manufactured TNKT 1105 inserts is specified for this Teknik Makina body (SKU S058TM). Does the tool provide through-coolant capability? Yes, the body features internal coolant, designed to supply cutting fluid directly to the cutting zone for improved heat control and chip evacuation. What is the shank diameter and overall length of the tool? The tool has a 40 mm shank diameter and an overall length of 130 mm, providing a rigid mounting for industrial clamping systems. How are the inserts secured and which fastening hardware is required? Inserts are fixed with a Torx-style screw; the specified screw is M3x7 and the recommended driver size is Torx T8 to ensure correct torque and repeatable clamping. Is this cutter body suitable for series production in a machine shop? The balanced design, four cutting edges and internal coolant make the body suitable for series production and repetitive milling tasks where stability and predictable tool life are priorities. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Shank Milling Cutter for APKT 1003 Indexable Inserts L100mm Internal Coolant - Teknik Makina
Take advantage of the internal coolant and compatibility with APKT 1003 indexable inserts to improve chip control and extend insert life; combine this with a robust 25 mm shank and 40 mm cutting diameter for stable, repeatable milling. Order the cutter directly via Metav Werkzeuge or consult our specialists for process-matching advice. Shank milling cutter – 40 mm, internal coolant (for APKT 1003) by Teknik Makina The Shank milling cutter is a 40 mm diameter, indexable-insert cutter with internal coolant, engineered for versatile face and shoulder milling in CNC and machining-centre environments Internal coolant for improved chip evacuation 40 mm cutting diameter for stable milling Compatible with APKT 1003 indexable inserts 25 mm shank with 100 mm overall length Consistent chip control and longer insert life with internal coolant The integrated internal coolant delivers cutting fluid directly to the cutting edge, reducing temperatures at the contact zone and promoting efficient chip evacuation. This focused cooling and lubrication helps to slow thermal wear and can extend the service intervals of indexable inserts, resulting in fewer tool changes and higher machine uptime. For operations requiring repeatable surface quality, the internal coolant notably reduces built-up edge and enhances dimensional stability during extended cuts. Rigidity and balance for stable, high-precision milling A substantial 25 mm shank combined with a 40 mm cutting diameter provides the rigidity needed to resist deflection in medium-duty milling tasks. The cutter’s 100 mm overall length keeps overhang moderate, supporting tighter tolerances and improved surface finish compared with longer-reach alternatives. The multiple cutting edges contribute to smooth cutting engagement and even load distribution, reducing vibration and helping to maintain concentricity on both semi-finished and final-pass operations. Fast insert changes and broad compatibility for workshop efficiency Designed for APKT 1003 style indexable inserts, this cutter accepts inserts from Korloy, enabling easy procurement and fast replacement. Indexable inserts allow inexpensive renewal of the cutting edge without regrinding the body; replacement is straightforward using the Torx system (Torx key T8, screws M2.5x5.5). This setup reduces downtime and simplifies inventory management, making the tool a practical choice for job shops and production lines that value quick serviceability and cost predictability. Practical integration into machining workflows and versatile use The tool is tailored for CNC milling centres and machining applications where changeover speed and consistent results are priorities. With a compact profile and internal coolant, the cutter integrates well into automated tool stacks and magazine systems. The robust construction and indexable concept also support process planning: choose appropriate feed and speed for the inserted grade and the workpiece material to optimise tool life and part quality, and benefit from reduced cycle interruptions and predictable maintenance intervals. For machining-process advice or to reserve the Teknik Makina shank milling cutter S156-1TM with internal coolant, contact Metav Werkzeuge for tailored recommendations and supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: S156-1TM Manufacturer: Teknik Makina Product type: Shank milling cutter Compatible inserts: APKT 1003 (Korloy) Label: 40mm Schaftfräser APKT 1003 L100mm mit Innenkühlung Core specifications Diameter: 40 mm Overall length: 100 mm Shank diameter: 25 mm Cutting length (shank length of cutting head): 30 mm Number of cutting edges: 5 Weight: 0.477 kg Features and compatible components Internal coolant: yes Torx key: T8 Torx screw: M2.5x5.5 SKU/UID: S156-1TM eCl@ss: 21180806 FAQ What inserts fit this cutter and who supplies them? The cutter accepts APKT 1003 indexable inserts; the tool is specified to be compatible with inserts from Korloy, offering a broad choice of grades for different materials. How does the internal coolant improve performance? Internal coolant channels deliver fluid directly to the cutting zone, lowering temperatures and improving chip evacuation; this helps to extend insert life and stabilise machining results with the Shank milling cutter. What are the key mounting dimensions to check for machine compatibility? Important mounting dimensions include the 25 mm shank diameter and 100 mm overall length; confirm toolholder clamping diameter and magazine capacity before integration. Which Torx tools and fasteners are required for insert changes? Insert clamping uses a T8 Torx key and M2.5x5.5 Torx screws for secure and repeatable insert retention. Is the cutter suitable for automated tool magazines? Yes; the compact design and standardized shank make the cutter suitable for tool magazines in CNC machining centres, provided the machine accepts a 25 mm shank diameter. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Shank Milling Cutter for APXT 1003 Indexable Inserts 5 Flutes 90° Cutting Angle 30mm Cutting Length 25mm Shank Diameter - Teknik Makina
Take advantage of the combination of stable clamping, quick insert replacement and a compact overall length for reliable milling processes; order the tool directly via Metav Werkzeuge or ask our consultants for application advice. S156TM shank cutter — Ø40 mm, 5‑flute indexable cutter (Teknik Makina) A S156TM shank cutter engineered for use with APXT 1003 indexable inserts, offering stable clamping and fast insert changes for industrial milling applications Ø40 mm cutting diameter, 5 flutes Robust 25 mm shank for stable clamping Compatible with APXT 1003 / Korloy inserts Torx M2.5×5.5 screws, T8 key required Stable clamping for consistent material removal The tool is built around a 25 mm shank and a Ø40 mm body, providing high torsional rigidity and reduced vibration during milling. With 5 flutes and a 30 mm cutting length, the geometry favours steady chip evacuation and even loading of each cutting edge, which supports consistent surface quality and repeatable cycle times. The modest weight of 0.477 kg and a 100 mm overall length help to balance the cutter in common toolholders while limiting extension from the spindle — a practical combination for machining setups where tool deflection must be kept to a minimum. Efficient insert handling and proven compatibility Designed for indexable operation with APXT 1003 inserts, the milling head simplifies maintenance and cost control by allowing worn inserts to be replaced in seconds. Fast, secure clamping is achieved via Torx M2.5×5.5 screws, tightened with a T8 key, which reduces downtime and ensures repeatable seating of inserts. Compatibility with Korloy-type inserts broadens tooling options and streamlines reordering; the modular design therefore contributes directly to a lower total cost of ownership in production environments where insert change frequency is high. Purpose-built for industrial milling workflows A 90° cutting angle offers a reliable compromise between axial engagement and radial cutting force, making the cutter suitable for a range of milling tasks from shoulder milling to semi-finishing. The indexable concept reduces the number of complete tools required in the workshop, since damaged edges are replaced instead of the entire cutter. Together with the tool's compact dimensions and robust shank, this results in easier tool management, reduced inventory complexity and improved machine uptime — advantages that matter in both jobbing shops and production lines. For expert guidance on integrating Teknik Makina indexable cutters into existing workflows or for ordering assistance from our Emmerich stock, contact Metav Werkzeuge — Metav’s specialists will advise on the S156TM application and delivery options. Technical data Article number: S156TM Manufacturer: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Core specifications Cutting diameter: 40 mm Shank diameter: 25 mm Cutting length: 30 mm Overall length: 100 mm Cutting edges: 5 Cutting angle: 90° Weight: 0.477 kg Design and features For APXT 1003 indexable inserts Compatible insert manufacturer: Korloy Fastening screws: Torx M2.5×5.5 Required key: T8 FAQ What inserts fit this cutter? The S156TM shank cutter accepts APXT 1003 indexable inserts; compatibility with Korloy inserts is specified for flexible sourcing. How are the inserts secured? Inserts are fastened with Torx M2.5×5.5 screws; a T8 key is required to achieve the correct torque and repeatable seating. What are the key dimensions to consider for toolholder selection? Use a 25 mm shank holder and allow for a 100 mm overall length when calculating reach; the cutter’s Ø40 mm diameter and 30 mm cutting length determine engagement limits. Is this cutter suitable for heavy roughing? The robust 25 mm shank and five cutting edges provide good rigidity for demanding operations, while the indexable design lets users adapt insert grades for heavier cuts. Can the cutter deliver repeatable results in production? Yes — the combination of precise insert clamping, a 90° cutting angle and a stable shank diameter supports consistent, repeatable machining across shifts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Shank Milling Cutter For ENMX 0905 Indexable Inserts, 5 Teeth, 32mm Shank - Teknik Makina
Take advantage of a robust, indexable solution that combines reliable chip evacuation, consistent cutting performance and easy reconditioning; the result is steady throughput and predictable tool life — order the tool directly via Metav Werkzeuge or consult our specialists for integration advice. Shank milling cutter S936TM — 40 mm diameter, for ENMX 0905 indexable inserts (Teknik Makina) A versatile shank milling cutter S936TM designed for roughing and semi-finishing applications, compatible with ENMX 0905 indexable inserts and optimised for stable, high-volume milling in workshop and light production environments Compatible with ENMX 0905 indexable inserts 40 mm cutting diameter 32 mm shank for rigid clamping Five cutting edges for stable removal Torx M3.5x8.7 screw, T17 key Higher throughput through stable cutting geometry The tool is engineered to deliver a high material removal rate while maintaining dimensional control. The combination of a 40 mm cutting diameter and five cutting edges reduces vibration and evens out load per tooth, which translates into fewer tool changes and more continuous production. Where batch sizes and cycle times matter, this design reduces the need for frequent intervention and supports predictable machining schedules. The result is a measurable efficiency gain in metal removal tasks without sacrificing surface quality. Secure clamping and straightforward maintenance A 32 mm shank offers a firm interface with common toolholders, improving concentricity and reducing runout during aggressive passes. The insert seat uses a Torx M3.5x8.7 fastening arrangement secured with a T17 key, enabling consistent torque and fast replacement of worn inserts. Reconditioning is limited to swapping indexable inserts and retorquing the screw, so maintenance remains quick and repeatable. This approach keeps downtime low and maintenance predictable for production environments. Wide compatibility and clear application range The cutter is explicitly designed for ENMX 0905 indexable inserts and is compatible with YG-1 insert variants, ensuring access to a broad selection of grades and geometries for different materials. The modular nature of indexable tooling allows the same body to be used across aluminium, steel and cast-iron applications when matched with the correct insert grade, delivering flexibility across job shops and specialist workshops. Choosing the right insert grade optimises wear resistance or chip control depending on the material. Practical benefits for workshop and small-series production By concentrating wear on replaceable inserts rather than on a monolithic cutter body, this system reduces ongoing tooling costs and simplifies inventory: keep a small range of inserts in stock and adapt performance quickly. The robust shank and multiple cutting edges support process stability under varying feeds and depths of cut, which is especially valuable for small-series production where set-up time must be minimised. The overall design supports consistent part quality with less operator adjustment. For tailored advice on integrating the Teknik Makina S936TM into existing tool setups or to discuss suitable insert grades, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange specification support and delivery from Emmerich Technical Data Article number: S936TM Designation: Shank milling cutter for ENMX 0905 indexable inserts Manufacturer: Teknik Makina Compatible inserts: ENMX 0905 (YG-1 compatible) Fastening: Torx M3.5x8.7, T17 Numbers / Core Technical Data Diameter: 40 mm Overall length: 180 mm Shank diameter (A): 32 mm Cutting edges: 5 ECLASS: 21180806 ETIM: EC011860 Special features / Versions Indexable insert system: ENMX 0905 Insert compatibility: YG-1 Torx screw fastening for repeatable clamping Suitable for roughing and semi-finishing operations FAQ What insert type does the cutter accept? The cutter accepts ENMX 0905 indexable inserts; compatible variants from YG-1 are commonly used with this tool. How is the insert secured in the tool? Inserts are secured with a Torx M3.5x8.7 screw tightened using a T17 key, ensuring consistent clamping force. What clamping interface does the tool require? The tool uses a 32 mm shank designed for rigid clamping in standard toolholders; appropriate holder selection improves concentricity. Is the cutter suitable for finishing passes? The design is primarily aimed at roughing and semi-finishing; fine finishing will depend on the chosen insert grade and machining parameters. Which manufacturer produces the tool and who is responsible for supply? The tool is produced by Teknik Makina and supplied via Metav Werkzeuge for European distribution. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Shank Milling Cutter for F75° APXT 1003 Indexable Inserts, 25mm Shank Diameter 35mm Cutting Length, 4 Teeth - Teknik Makina
Take advantage of a compact, rigid cutter that combines a 40 mm cutting diameter, a 75° cutting angle and compatibility with APKT 1003 indexable inserts for reliable, repeatable milling results; order the tool directly via Metav Werkzeuge or contact the consultants for application advice. Shaft Milling Cutter S346TM – 40 mm diameter, for APKT 1003 indexable inserts (Teknik Makina) The Shaft Milling Cutter S346TM is a shank-mounted milling tool engineered for indexable-insert applications with a 75° cutting geometry, suitable for medium‑duty slotting and face milling where tool stability and simple insert replacement are priorities 40 mm cutting diameter Four cutting edges Shaft Ø 25 mm Compatible with APKT 1003 inserts High material removal with controlled cutting geometry The cutter’s 40 mm diameter and the 75° cutting angle deliver an effective combination of axial engagement and radial support, allowing consistent chip formation while reducing load peaks on each insert. With four cutting edges, the tool balances productivity and surface finish: every rotation engages multiple edges for steady material removal, while indexable inserts ensure quick restoration of cutting performance. The documented geometry is particularly useful where reproducible results are required across series production runs, and the 75° angle improves flank support compared with more acute geometries, lowering the risk of premature insert chipping. Stable shank design for accurate set‑up and low vibration A robust Ø 25 mm shank and a total length of 100 mm combine to provide secure clamping in standard tool holders and reduced overhang effects during milling. The 35 mm cutting length gives an effective balance between reach and rigidity; as a result, runout and chatter are minimised, which benefits dimensional accuracy and tool life. The tool’s modest mass (0.494 kg) contributes to predictable dynamics on the spindle, simplifying process calculations for feeds and speeds and helping to maintain a consistent surface quality in repetitive machining tasks. Fast serviceability and broad insert compatibility Maintenance is straightforward: the insert seat accepts APKT 1003 indexable inserts and is compatible with Korloy‑type geometries, allowing access to a wide range of cutting grades. Fast clamp replacement is achieved using the supplied Torx screw specification M2.5x5.5 and a T8 Torx key, making insert changes quick and safe on the shop floor. Indexable inserts reduce downtime compared with regrindable tooling and, combined with the cutter’s standardised interface, permit rapid adaptation to different cutting materials or cutting edge specifications without replacing the holder. Contact Metav Werkzeuge for a technical quotation on the Teknik Cutting Tools S346TM, request compatible APKT 1003 inserts or arrange an application consultation from our Emmerich team Technical data Article number: S346TM Manufacturer: Teknik Makina Weight: 0.494 kg Facts Cutting diameter: 40 mm Shaft diameter: 25 mm Cutting length: 35 mm Overall length: 100 mm Cutting edges: 4 Cutting angle: 75° Special features Compatible with APKT 1003 indexable inserts Suitable for Korloy inserts Torx screw: M2.5x5.5 Torx key: T8 FAQ How are the indexable inserts secured on this cutter? The S346TM holds APKT 1003 indexable inserts with an M2.5x5.5 Torx screw; a T8 key is used for tightening and loosening during service. Which insert manufacturers fit the tool seat? The cutter is compatible with Korloy‑type inserts and specifically set up for APKT 1003 geometries, enabling use of standard indexable grades. What dimensions are relevant for machine set‑up? Use the cutter’s 40 mm diameter, Ø25 mm shank, 35 mm cutting length and 100 mm overall length for holder selection and tool offset programming with the S346TM. How many effective cutting edges are available per revolution? The tool features four cutting edges, which promotes smooth cutting action and balanced chip removal on each spindle rotation. What is the article number and who supplies the tool? The article number is S346TM; it is produced by Teknik Makina and supplied via Metav Werkzeuge for European distribution. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Shank Milling Cutter For RDMT 1003 Indexable Inserts, 32mm Shank Diameter 45mm Cutting Length, 4 Flutes - Teknik Makina
Take advantage of a rigid, long‑reach milling solution that combines stable cutting geometry and quick insert changes for consistent production runs. The solid 32 mm shank and 40 mm cutting diameter deliver steadiness under load, while compatibility with RDMT 1003 indexable inserts reduces downtime—order via Metav Werkzeuge or consult our specialists for application advice. Shank milling cutter R218TM – 40 mm diameter, 4‑flute for RDMT 1003 inserts by Teknik Makina A Shank milling cutter R218TM engineered for secure insert clamping and reliable performance in CNC milling setups, suitable for medium‑reach slotting and face operations using RDMT 1003 indexable inserts 40 mm diameter for stable cutting 32 mm shank for high rigidity Four cutting edges for smooth material removal Compatible with RDMT 1003 indexable inserts Rigidity and repeatable geometry for stable machining The tool's 32 mm shank and 40 mm diameter combine to reduce vibration and run‑out, which preserves insert life and improves surface finish. With a four‑flute layout, the cutter balances material removal rate and chip evacuation, delivering steady cuts in cyclic production. The cutter's 45 mm cutting edge length and 200 mm overall length give a practical reach without unnecessary overhang, helping to maintain concentricity and dimensional consistency across batches. The robust mounting and balanced geometry are particularly valuable where repeatability and predictable tool behaviour drive process stability. Productivity gains from fast indexable inserts and secure clamping Designed for indexable systems, the cutter accepts RDMT 1003 inserts, enabling fast replacement and a controlled cutting edge form. The insert retention uses a locking screw M3.5 together with a Torx screw M3.5x8.5, tightened with a T15 key, which simplifies maintenance and reduces machine downtime. The tool's balanced mass (approx. 1.281 kg) supports higher axial engagement and steady feed rates while the four cutting edges distribute cutting forces, allowing a pragmatic compromise between high metal removal and tool life. Explained plainly: fewer interruptions, more productive cutting time. Practical serviceability and application guidance The cutter's interface and standard screw sizes make it straightforward to keep spare parts on the shelf and to swap inserts during shift changes. The compatibility with industry‑standard RDMT 1003 grades lets operators select the appropriate insert coating and chipbreaker for the workpiece and machining strategy. Documentation and the two attached files provide installation and maintenance references. For complex setups or to clarify insert grades and cutting data, Metav Werkzeuge offers technical advice and can assist with selection to match the machining task and machine tool capabilities. For a reliable combination of rigidity, reach and fast insert changes, contact Metav Werkzeuge to discuss the Teknik Makina R218TM shank milling cutter and receive tailored application support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: R218TM Manufacturer: Teknik Makina Designation: Schaftfräser — for RDMT 1003 Indexable Inserts EClass: 21180806 ETIM: EC011860 Core dimensions Diameter: 40 mm Shank diameter: 32 mm Cutting edge length: 45 mm Overall length: 200 mm Number of cutting edges: 4 Weight: 1.281 kg Features and fittings Compatible inserts: RDMT 1003 Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 Files: 62de7ee4bd24461b3d5f7a6e, 62de7e4e33927e49dbf32747 FAQ What inserts are compatible with this cutter? The R218TM shank milling cutter is compatible with RDMT 1003 indexable inserts; the design supports standard RDMT insert geometries and grades. How are the inserts secured in the tool? Inserts are clamped with a locking screw M3.5 and a Torx screw M3.5x8.5, tightened using a T15 Torx key for secure and repeatable retention. What are the cutter's main dimensions and reach? The cutter has a 40 mm cutting diameter, 32 mm shank diameter, 45 mm cutting edge length and a 200 mm overall length. Can different insert grades be used for varying materials? Yes, the R218TM accepts RDMT 1003 grades; selecting the appropriate insert substrate and coating adapts the cutter to different workpiece materials and machining strategies. How quickly can inserts be replaced during production? Insert change is rapid: the standard M3.5 fixing and T15 key allow quick exchange and re‑clamping, minimising machine downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Shank Milling Cutter for RPMW 1204 Indexable Inserts, 4 Flutes, 150mm Overall Length - Teknik Makina
Take advantage of the combination of robust build, precise insert compatibility and easy maintenance for reliable machining output; the 40 mm diameter and 32 mm shank provide stable clamping while compatibility with RPMW 1204 indexable inserts ensures quick insert changes—order via Metav Werkzeuge or consult our specialists for technical advice. Milling cutter body R327TM — indexable-insert milling cutter, Ø 40 mm, 32 mm shank (Teknik Makina) The Milling cutter body R327TM is a compact, industrial-grade tool body intended for indexable-insert milling applications with RPMW 1204 inserts Ø 40 mm cutter body 32 mm shank for rigid clamping 4 cutting edges for stable material removal Compatible with Korloy RPMW 1204 inserts Stable clamping for consistent machining quality The R327TM tool body is designed to deliver rigid fixation through its 32 mm shank, reducing deflection and vibration during heavy cuts. This rigidity directly improves dimensional stability and surface finish, which is particularly relevant for production runs that demand repeatability. The combination of a Ø 40 mm cutter diameter and a balanced body geometry reduces chatter and supports predictable tool life, helping to keep scrap rates down and throughput steady for workshop or CNC cell environments. Fast insert changes and predictable setup times Equipped to accept RPMW 1204 indexable inserts, the cutter body simplifies maintenance and shortens downtime because inserts can be replaced without removing the whole tool. The secure fastening with a Torx M4x7 screw and a T15 key ensures repeatable seating of the insert, which preserves cutting geometry and reduces setup variability. For shops that value throughput, this approach translates into quicker reconditioning and a more efficient tool inventory: one holder plus stocked inserts yields many cutting edges. Practical benefits: usability, versatility and supply reliability The cutter body’s four cutting edges provide balanced engagement and steady chip load distribution, which suits a range of milling operations using the specified insert family. While the tool body is supplied by Teknik Makina and marked R327TM, Metav Werkzeuge supports the supply chain with logistical reliability and application advice, helping to match insert grades and coatings to specific machining tasks. The result is a pragmatic mix of performance and service that supports day‑to‑day production demands and reduces procurement complexity. Contact Metav Werkzeuge to discuss the Teknik Makina R327TM milling cutter body, confirm insert grades and secure reliable delivery from Emmerich to the workshop Technical information Article number: R327TM Manufacturer: Teknik Makina Article name: Milling cutter body for RPMW 1204 indexable inserts SKU: R327TM Facts Diameter: 40 mm Overall length: 150 mm Shank diameter: 32 mm Cutting edges: 4 Torx screw: M4x7 Torx key: T15 Special features Compatible with RPMW 1204 indexable inserts Insert manufacturer: Korloy Manufacturer brand: Teknik Makina FAQ Which inserts fit this cutter body? The cutter body accepts RPMW 1204 indexable inserts; Korloy RPMW 1204 inserts are specifically compatible with the R327TM. What key is required to change inserts? Insert fastening uses a Torx M4x7 screw; a T15 Torx key is specified for secure and repeatable clamping. What are the main dimensions relevant for spindle holders? Important dimensions are a Ø 40 mm cutter diameter, 150 mm overall length and a 32 mm shank diameter, which determine clearance and clamping requirements. How many cutting edges does the tool body provide in use? The R327TM is configured with 4 cutting edges, delivering balanced engagement and consistent chip removal. Who supplies the R327TM and who handles distribution in Europe? The tool body is produced by Teknik Makina (Teknik Cutting Tools) and distributed for the European market with logistical support from Metav Werkzeuge Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Shell Mill For APKT 1604 Indexable Inserts 4 Cutting Edges, 60mm Cutter Length, 250mm Overall - Teknik Makina
Take advantage of a rigid 32 mm shank, compatibility with APKT 1604 indexable inserts and a 60 mm effective cutting length for consistent milling performance; order the cutter body directly via Metav Werkzeuge or consult our specialists for application guidance. Shaft milling cutter S440TM — cutter body for APKT 1604 indexable inserts, 40 mm diameter The Shaft milling cutter S440TM is a heavy-duty cutter body engineered for indexable-insert milling on CNC machines and milling centres, suitable for a wide range of general and structural machining tasks. For APKT 1604 indexable inserts 32 mm shank for stable clamping 60 mm effective cutting length M4x10 Torx screw with T15 key Stability and performance for demanding milling operations The S440TM tool body delivers stable chip removal and repeatable geometry thanks to its robust design and generous 32 mm shank, which reduces vibration and improves surface finish during interrupted cuts. The combination of a 40 mm diameter and four cutting edges provides balanced cutting forces, enabling higher feed rates with predictable tool life. Where process reliability is paramount, this milling body converts the advantages of indexable inserts into consistent production output by securing the insert location and clamping force precisely. For production environments, the result is fewer rejects and reduced rework, as the tool body sustains accurate engagement with the workpiece over long runs. Designed for indexable insert systems — quick change and broad compatibility Configured specifically for APKT 1604 indexable inserts and compatible with Korloy grades, the cutter body simplifies insert handling and application choice. Using standardised inserts allows quick on-machine changes and access to a wide range of insert geometries and grades for different materials. The S440TM includes an M4x10 Torx screw and requires a T15 key, which secures the insert reliably while enabling fast replacement during shift changes. By pairing a proven insert system with a sturdy tool body, machining shops gain flexibility: choose coatings and grades for aluminium, steels or castings while retaining the same mechanical holder for repeatable set-ups. Practical handling, maintenance and process benefits Maintenance and setup are straightforward: the tool body’s modular nature and familiar torque interface mean minimal downtime when replacing inserts or reconditioning the holder. The 60 mm effective cutting length offers extended reach for pocketing and face milling without sacrificing rigidity, and the item’s 250 mm overall length suits standard tool pockets. For workshop managers and production engineers, a compact inventory approach is achievable — fewer dedicated solid tools, more interchangeable inserts and a resilient holder that supports batch processing. Documentation and repeatability are improved because the cutter body keeps insert datum positions consistent, easing process qualification and quality control. For procurement or process advice on the Teknik Cutting Tools S440TM, contact Metav Werkzeuge in Emmerich for delivery options and technical consultation via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S440TM Manufacturer: Teknik Makina Suitable for indexable inserts: APKT 1604 Compatible insert manufacturer: Korloy Torx screw: M4x10 Torx key size: T15 Facts Shank diameter: 32 mm Effective cutting length: 60 mm Diameter: 40 mm Cutting edges: 4 Overall length: 250 mm Weight: 1.612 kg Cutting angle: 90° Special features For APKT 1604 indexable inserts Compatible with Korloy insert grades Supplied with M4x10 Torx screw Requires T15 Torx key for clamping Designed for indexable-insert milling applications FAQ What inserts fit this cutter body? The cutter body accepts APKT 1604 indexable inserts; Korloy grades are specified as compatible. Which shank size does the tool use? The tool features a 32 mm shank, providing a robust interface for stable clamping in the spindle or holder. How long is the cutting length and overall tool length? The effective cutting length is 60 mm, with a total tool length of 250 mm. What fastening components are included? The package references an M4x10 Torx screw and the corresponding T15 Torx key for insert clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Shell Mill For BDMT 1704 Indexable Inserts, 4 Flutes 150mm Overall Length, 32mm Shank - Teknik Makina
Take advantage of the cutter's combination of a Ø 40 mm cutting diameter and a 32 mm shank for robust material removal, together with secure fastening using an M4x10 Torx screw (T15) for fast insert changes; order directly via Metav Werkzeuge or consult our specialists for insert pairing and setup. Shank milling cutter S585TM by Teknik Makina — Ø 40 mm, for BDMT 1704 indexable inserts A shank milling cutter S585TM built for indexable-insert milling tasks, engineered to accept BDMT 1704 inserts and to deliver stable, repeatable cuts in routine production and rework operations. Ø 40 mm cutter diameter 32 mm shank diameter Compatible with BDMT 1704 inserts (Kyocera) 4 cutting edges, 90° cutting angle Higher removal rates with defined insert compatibility The S585TM body is optimised for efficient material removal by combining a Ø 40 mm cutting circle with a dedicated cutting length of 40 mm, enabling substantial metal removal per pass while maintaining control. Acceptance of BDMT 1704 indexable inserts simplifies tooling logistics and reduces changeover time compared with brazed or solid-carbide cutters. The supplied M4x10 Torx screw secured with a T15 key ensures reliable clamping of each insert, which helps to maintain consistent cutting geometry and reduces the need for frequent readjustment. These features translate into a measurable throughput advantage on repetitive milling operations. Robust design for vibration resistance and steady finishing A 32 mm shank increases the effective stiffness between tool and spindle, reducing deflection under load and supporting stable cutting behaviour across the available 150 mm overall length. The cutter's four cutting edges spread the cutting force evenly, which diminishes vibration and supports a better surface quality on the machined component. The 90° cutting angle provides a neutral approach to face and shoulder milling, offering predictable engagement conditions that simplify cycle planning. Overall, the combination of shank size, edge count and geometry leads to improved process reliability and fewer rejects in serial production. Fast insert handling and workshop integration Tool maintenance and insert replacement are accomplished with standard workshop tools: the M4x10 Torx screw (T15) secures inserts quickly and repeatably, reducing downtime during set-up. Compatibility with Kyocera BDMT 1704 inserts expands sourcing options and allows users to match grades for specific materials or cutting conditions. The tool's near-1 kg mass (0.985 kg) and balanced geometry aid in stable running at moderate spindle speeds, while the available data class codes (ECLASS and ETIM) support procurement and ERP integration. For further technical queries or to confirm insert grades and clamping torques, Metav's application advisors can provide tailored recommendations. Choose the Teknik Makina S585TM shank milling cutter for reliable insert milling and contact Metav Werkzeuge for matching BDMT 1704 inserts and expert setup guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S585TM Manufacturer: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Facts Diameter: 40 mm Shank diameter: 32 mm Cutting length: 40 mm Total length: 150 mm Number of cutting edges: 4 Cutting angle: 90° Weight: 0.985 kg Special features Compatible inserts: BDMT 1704 Compatible insert manufacturer: Kyocera Torx screw: M4x10 Torx key size: T15 Designed for indexable insert milling FAQ What inserts fit this milling cutter? The cutter accepts BDMT 1704 indexable inserts; the S585TM is specified for that insert type and is compatible with Kyocera-sourced grades. Which toolholder dimensions are required for safe clamping? A holder that accepts a 32 mm shank and supports a total tool projection suitable for a 150 mm overall length is recommended to preserve rigidity and effective cutting performance. How are inserts secured and changed? Inserts are clamped with an M4x10 Torx screw tightened with a T15 key, enabling quick and repeatable exchange of BDMT 1704 inserts without specialised equipment. What machining tasks suit this cutter best? The tool body is intended for indexable-insert milling where a Ø 40 mm cutter with a 90° cutting angle and four edges offers efficient face and shoulder operations in production environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Shell Mill For RDMT 12T3 Indexable Inserts 3 Flutes 45mm Cutting Length 300mm Overall Length, 32mm Shank Diameter - Teknik Makina
Combining a robust 32 mm shank with a Ø 40 mm cutting diameter and compatibility with RDMT 12T3 indexable inserts, this shank cutter provides stable, high-efficiency milling for demanding workshop and production environments; order the shank cutter directly via Metav Werkzeuge or consult our specialists for technical matching. Shank cutter for RDMT 12T3 indexable inserts — Ø 40 mm, 32 mm shank (Teknik Makina) A shank cutter designed for heavy-duty milling with RDMT 12T3 indexable inserts, suitable for industrial and jobbing-shop applications Compatible with RDMT 12T3 indexable inserts Ø 40 mm cutting diameter for aggressive machining 32 mm shank for stable toolholding 45 mm effective cutting length per shank Stability and process reliability for demanding milling The solid 32 mm shank and balanced Ø 40 mm body keep the tool rigid under load, reducing chatter and improving surface finish. This cutter is engineered to transfer cutting forces evenly to the spindle, which increases repeatability when machining batches. The robust design supports higher metal‑removal rates and allows the machine to work at more productive feeds and speeds without sacrificing dimensional stability, delivering a measurable improvement in cycle-time efficiency. Optimised insert system for consistent chip control Designed specifically for RDMT 12T3 indexable inserts, the cutter enables quick indexation and repeatable pocket seating. The three cutting edges and a 45 mm cutting length per shank are arranged to provide effective chip thinning and evacuation, which is beneficial when working with a range of materials. Operators gain consistent cutting behaviour with fewer interruptions for insert changes, translating into improved throughput and reduced tooling downtime. Secure clamping and simple maintenance on the shop floor Fixing and maintenance are straightforward: the tool is supplied with an M3.5 locking screw and an M3.5×8.5 Torx screw operated with a T15 key, enabling rapid insert changes and secure clamping. The accessible screw geometry shortens service intervals and reduces handling time. For workshops seeking predictable maintenance cycles, the configuration minimises the risk of incorrect fastening and supports safe, repeatable tool life management. Practical application range and workshop integration With an overall length of 300 mm and a weight of 1.995 kg, the cutter balances reach and mass for stable machining on horizontal and vertical milling centres. The tool is suitable for medium to heavy roughing passes where the combination of diameter and insert type is advantageous. Specification clarity and the choice of a common insert format help procurement teams standardise tooling across machines, simplifying stock management and reordering procedures. Contact Metav Werkzeuge for a tailored tooling recommendation, availability from Emmerich and technical matching — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: R260TM Manufacturer: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Facts Cutting diameter: 40 mm Shank diameter: 32 mm Cutting length: 45 mm Overall length: 300 mm Number of cutting edges: 3 Weight: 1.995 kg Special features For RDMT 12T3 indexable inserts Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 FAQ What insert type does this cutter accept? The cutter is designed for RDMT 12T3 indexable inserts and provides correct pocket seating and reliable indexation for consistent performance. What is the shank diameter and why does it matter? The 32 mm shank provides increased rigidity and improved toolholding stability, reducing vibration during heavy cuts when using the Teknik Makina shank cutter (R260TM). How long is the effective cutting length? The effective cutting length is 45 mm, allowing deeper axial engagement and longer uninterrupted passes compared with shorter‑lipped tools. Is the tool suitable for roughing operations? Yes, the Ø 40 mm diameter combined with three cutting edges makes the cutter well suited to medium and heavy roughing where high metal removal is required. Which fastening hardware is required for insert changes? Insert retention uses an M3.5 locking screw and an M3.5×8.5 Torx screw; a T15 Torx key is specified for secure and repeatable fastening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Shell Mill For TPKN 1103-2204 Indexable Inserts, 3 Flutes 45mm Cutting Length, M6x17 Clamp - Teknik Makina
Benefit from a compact, indexable-insert design that combines a 40 mm cutting diameter with a 25 mm shank for stable mounting and consistent chip control; the 45 mm effective cutting length supports deeper passes while maintaining surface finish. Order the milling cutter directly via Metav Werkzeuge or consult the technical team for application advice. Shaft milling cutter S130TM – 40 mm diameter, 25 mm shank (Teknik Makina) A robust Shaft milling cutter S130TM engineered for use with indexable inserts, delivering reliable peripheral milling and face operations in industrial and workshop settings. 40 mm cutting diameter 25 mm hardened shank Compatible with TPKN 1103–2204 inserts 45 mm effective cutting length Three cutting edges for smooth cutting Stable mounting and predictable machining results The solid shank design with a 25 mm shank diameter provides a secure clamping interface that reduces vibration and run-out during milling cycles. Stability at the tool holder translates into consistent surface quality and predictable tool life, particularly when performing longer cuts. The balanced mass and the specified overall length of 120 mm support stable rotations at typical spindle speeds used in finishing and medium-roughing operations. Clear insert compatibility for flexible tooling Designed expressly for indexable inserts TPKN 1103–2204, the cutter head accepts proven insert geometries that allow quick replacement and process adaptation. The modular insert system reduces downtime: worn cutting edges can be swapped without regrinding, which improves uptime and lowers per-part tooling cost. Compatibility with standard insert types also simplifies inventory management for maintenance and production planning. Efficient material removal with conservative cutting geometry Equipped with three cutting edges, the tool balances material removal rate with cut stability to produce smooth chip flow and reduced cutting forces. The 45 mm effective cutting length enables deeper axial engagement for fewer passes on stepped components, while the 40 mm diameter maintains a favourable stiffness-to-cutting-area ratio. The provided M6x17 Torx screw secures the insert reliably, supporting repeatable positioning and force transmission under load. Supply reliability and partner support for production continuity Supplied through Metav’s logistics hub in Emmerich, the tool benefits from a transparent supply chain and access to technical documentation. Metav Werkzeuge’s assortment approach reduces procurement complexity and ensures rapid replenishment when tools are consumed in production. Technical consultation is available for process matching, toolholder selection and optimisation of cutting parameters to align the cutter’s capabilities with specific material and application needs. For production enquiries or to request stock and application guidance for the Teknik Makina shaft milling cutter S130TM, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for fast, expert support. Technical data Article number: S130TM SKU: S130TM Facts Cutting diameter: 40 mm Shank diameter: 25 mm Effective cutting length: 45 mm Overall length: 120 mm Number of cutting edges: 3 Weight: 0.552 kg Torx screw: M6x17 Allen key: size 4 Special features Compatible with TPKN 1103–2204 indexable inserts Indexable-insert system for fast replacement Designed for peripheral and face milling Balanced design for reduced vibration FAQ What insert types are compatible with the cutter? The shaft milling cutter accepts TPKN 1103–2204 indexable inserts as specified for the S130TM, enabling fast replacement and a wide choice of grade/geometries. How does the shank diameter affect performance? A 25 mm shank provides a rigid connection to standard toolholders; this rigidity improves run-out behaviour and delivers more consistent surface finishes when using the S130TM. Is the tool suitable for heavier material removal? With three cutting edges and a 45 mm effective cutting length, the cutter is suited to moderate axial depths for efficient material removal while maintaining stability; final suitability depends on machine power and selected cutting parameters. Which fastening components are supplied? The cutter is secured with an M6x17 Torx screw and requires a size 4 Allen key for insert changes, ensuring repeatable clamp force and precise insert seating. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Solid Carbide End Mill for ADKT 1505 Indexable Inserts 4-Flute, 45mm Cutting Length - Teknik Makina
Take advantage of the 40 mm cutting diameter and 32 mm shank for a stable, high-capacity milling solution; the compatibility with ADKT 1505 indexable inserts keeps tooling costs predictable and maintenance quick — order directly via Metav Werkzeuge or consult the technical team for application-specific advice. Indexable Insert Milling Cutter S317TM — 40 mm diameter, 32 mm shank (Teknik Makina) The S317TM is a robust indexable insert milling cutter designed for heavy-duty industrial milling with ADKT 1505 inserts, ideal for production and rework operations. 40 mm cutting diameter for efficient material removal 32 mm shank for secure clamping in toolholders Designed for ADKT 1505 indexable inserts (ISCAR) Four cutting edges for balanced milling performance Stable, accurate machining that keeps cycle times consistent The cutter delivers a rigid cutting geometry that reduces vibration and stabilises tool life. With a 40 mm diameter and 32 mm shank, the tool is engineered for secure clamping and repeatable positioning in common holders. The robust construction contributes to stable machining and predictable cycle times, which benefits process planning and throughput. The specification of four cutting edges ensures even load distribution and consistent surface finish when the tool is operated within recommended parameters. Compatibility that minimises set-up and inventory complexity Compatibility with ADKT 1505 indexable inserts simplifies stock management: one cutter body accepts a widely available insert family, while the recommended insert supplier ISCAR provides a familiar supply chain for many workshops. Fastener details such as T15 Torx engagement and M4x10 fixing screws are industry-standard, so replacement parts and maintenance tools are commonly available. This combination reduces changeover time and supports lean tooling strategies in batch and series production environments. Performance advantages for production-oriented shops Balanced design and multiple cutting edges translate into improved material removal rates and extended service intervals. The cutter’s geometry promotes efficient chip evacuation, supporting higher feed rates without compromising surface quality. The tool’s mass (approx. 1.102 kg) reflects a sturdy build that helps maintain cutting stability during interrupted cuts or heavier engagement depths. Taken together, these features support a favourable cost-per-part ratio in medium- to high-volume milling operations. Clear specifications for procurement and maintenance planning Detailed data such as shank diameter, overall length and fastening type make the tool straightforward to integrate into procurement lists and machine set-ups. The standardised fixing method and insert family reduce ambiguity when ordering spare screws or replacement inserts. For purchasers and process engineers, the transparent specification aids in comparing alternatives and verifying compatibility with existing toolholders and machining centres — facilitating smoother procurement and less downtime during tool changes. Speak to Metav Werkzeuge's technical consultants to confirm the optimal insert grade and secure supply from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S317TM Label: 40mm Schaftfräser ADKT 1505 L150mm Manufacturer: Teknik Makina eClass: 21180806 Facts Diameter: 40 mm Shank diameter: 32 mm Overall length: 150 mm Cutting length (shank): 45 mm Cutting edges: 4 Weight: 1.102 kg Special features Compatible with ADKT 1505 indexable inserts Indexable insert manufacturer: ISCAR Torx key: T15 Torx screw: M4x10 FAQ Which inserts fit this cutter? The cutter accepts ADKT 1505 indexable inserts; inserts from the ISCAR family match the geometry specified for the S317TM. What shank diameter is required for toolholders? The S317TM requires a 32 mm shank holder to ensure proper clamping and concentricity during milling. How many cutting edges does the tool have? The tool is supplied with four cutting edges, providing a balanced load and consistent finish across the machined surface. Which fastening tools are needed for insert changes? Insert fixation uses a T15 Torx engagement and M4x10 fixing screws as specified for the S317TM. Is the cutter suitable for high-volume production? The S317TM’s combination of 40 mm diameter, robust build and standardised insert system is targeted at production environments where repeatability and quick insert replacement are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
High-performance shank cutters and ball nose cutters for efficient milling
Insert shank cutters and ball nose cutters combine flexibility and productivity for a wide range of milling tasks. The category covers steel-bodied shank cutters fitted with indexable inserts for economical roughing, face milling, cornering and slotting, as well as ball nose cutters for contouring and 3D finishing.
How these tools work and where they belong
Shank cutters with indexable inserts use a carrier body made from hardened steel; the cutting edges are provided by removable inserts rather than a solid tool blank. Where tools do not have internal coolant, process heat and chips are managed via external coolant nozzles or compressed air, which is sufficient for open, surface-level and easily accessible milling on standard materials. Shank cutters with internal coolant feature fine internal channels that deliver coolant or blasting air directly to each cutting edge under pressure. This targeted supply is essential for deep pockets, cavities, full slotting and machining of heat-resistant or difficult-to-machine materials, because it prevents chip re-cutting, protects cutting edges from thermal overload and enables higher feed rates and improved surface quality.
Cut cycle times and reduce tooling costs
- Replaceable indexable inserts reduce consumable costs and shorten tool change time.
- Targeted internal coolant improves chip evacuation and extends insert life.
- Robust steel carrier bodies enable heavy-duty roughing without frequent tool replacement.
- Suitable for roughing, planing, corner milling and slot milling as well as precision 3D profiling with ball nose cutters.
A practical choice for purchasing and stocking tools
Metav brings a pragmatic purchasing advantage: a broad range of milling solutions is available from a single European quality hub. Metav’s focus on democratising precision means workshops benefit from a wide assortment, consistent quality control from Emmerich and steady supply — supported by decades of expertise and over 48,000 satisfied customers. Choose Metav for a centralised sourcing strategy that reduces supplier complexity while keeping access to both insert milling cutters (also referred to as insert milling cutters or indexable end mills) and ball nose cutters (also known as ball nose end mills or radius cutters) straightforward.
Quick summary
Insert shank cutters and ball nose cutters deliver flexible, cost-effective milling: replaceable inserts lower running costs, and internal coolant options enable higher performance and longer tool life where chip control is critical.
FAQ
When should I choose a shank cutter with indexable inserts rather than a solid carbide end mill?
Choose shank cutters with indexable inserts for economical roughing and high-stock-removal tasks where replacing inserts is preferable to replacing an entire tool; they are especially effective for face milling, cornering and slotting operations.
Does internal coolant make a measurable difference for ball nose cutters?
Yes. Internal coolant directed to each cutting edge reduces chip re-cutting and thermal stress, which improves surface finish and increases insert life when machining deep pockets, cavities or heat-resistant materials.
Can shank cutters without internal coolant be used for general workshop milling?
Absolutely. Tools without internal coolant rely on external coolant nozzles or compressed air and are well suited to open, superficial and easily accessible milling on standard materials.
What milling operations are shank cutters for indexable inserts typically used for?
Shank cutters with indexable inserts excel at economical roughing, planfräsen (face milling), corner milling and slot milling; ball nose cutters are the preferred choice for 3D profiling and finishing operations.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com