Turning Tools

Turning Holder (Klemmhalter) — SVVBN for VBMT Indexable Inserts by Teknik Makina A robust Turning Holder designed to clamp VBMT 1604 indexable inserts securely for precision turning and finishing operations. SVVBN 1616 design for VBMT 1604 inserts 100 mm overall length for stable reach 16 mm width and height for rigid support 72.5° cutting angle for consistent chip control Suitable for precision turning and finishing Maximise Turning Precision with Reliable Clamping The Turning Holder provides consistent, repeatable clamping for VBMT 1604 indexable inserts, delivering high positional stability during cuts. Its SVVBN 1616 geometry ensures correct seating of the insert and reduces micro-movements that create chatter. For workshops focused on tight tolerances, this tool holder translates insert performance into predictable part quality, making setup reproducible and reducing scrap rates. Compact Design That Boosts Rigidity and Accessibility With an overall length of 100 mm and a cross-section of 16 mm by 16 mm, the holder balances reach and stiffness to minimise tool deflection. The 8 mm cutting-head width concentrates support where it matters most, while the 72.5° cutting angle promotes controlled chip flow and consistent surface finishes. An indexable insert is a replaceable cutting tip; using such inserts with a stable holder reduces downtime and simplifies maintenance for less experienced operators. Designed for Workshops and Precision Machine Shops This clamping solution is aimed at professional users who require dependable tool performance during finishing and medium-turning operations. The H16 shank designation supports secure mounting and simple replacement routines, lowering setup times. As a result, operators gain efficiency: fewer adjustments, more parts per shift, and improved consistency across production runs. The overall construction supports both manual and CNC lathes when matched to appropriate toolposts. Easy Handling, Low Maintenance, Proven Manufacturer Support The holder's straightforward clamping principle allows fast insert changes and minimal tooling overhead, contributing to lower lifecycle costs. The SVVBN configuration and material choices from Teknik Makina are designed for long-term dimensional stability, which reduces frequency of regrinding or replacement of adjacent components. For complex applications or specific material challenges, the robust design simplifies troubleshooting and tool selection. We recommend Teknik Makina’s Turning Holder for reliable, precision clamping — for expert advice and ordering, contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271). Bezeichnung: Klemmhalter Brand: Teknik Makina SKU: D132TM Suitable Inserts: VBMT 1604 ISO Designation: SVVBN 1616 Secondary Designation: H16 Overall Length: 100 mm Width: 16 mm Height: 16 mm Cutting Head Width: 8 mm Cutting Angle: 72.5° Weight: 0.184 kg GTIN: 4061905153754 Condition: new Availability: in Stock ECLASS: 21181004 Product Type: VARIANT Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder by Teknik Makina? The Turning Holder (Klemmhalter) from Teknik Makina is designed specifically for VBMT 1604 indexable inserts, ensuring secure seating and optimal cutting alignment when used with the matching insert geometry. What are the key dimensions I should check for compatibility? For the Turning Holder (Klemmhalter) by Teknik Makina check the overall length of 100 mm, the 16 mm width and height, and the H16 designation to confirm fit with your toolpost and machine setup. How does the 72.5° cutting angle affect machining? The 72.5° cutting angle on the Teknik Makina Turning Holder promotes consistent chip control and a stable cutting edge engagement, which helps achieve smoother surface finishes in finishing operations. Where can I get technical advice or order the Turning Holder? If you need application support or further technical data for the Turning Holder (Klemmhalter) by Teknik Makina, METAV Werkzeuge provides expert consultation — contact info@metav-werkzeuge.com, call +49 2822 7131930, or message via WhatsApp at +49 170 2837271. 72.5° SVVBN 1616 Turning Holder for VBMT 1604, 100mm Length - Teknik Makina

Turning Holder — Clamping Tool for DN-- 1506 Indexable Inserts by Teknik Makina The Turning Holder is a precision clamping tool designed for secure mounting of DN-- 1506 indexable inserts, optimised for stable turning operations in metalworking. Turning Holder DDHNL 2020 for DN-- 1506 inserts Robust clamping design with 107.5° cutting angle 125 mm overall length for stable tool engagement 25 mm cutting head width for secure insert support Left-hand machining orientation for turning operations Precision Clamping for Consistent Surface Finish Thanks to the DDHNL 2020 clamping concept, this holder provides a firm and repeatable grip for DN-- 1506 indexable inserts, reducing micro-movement during cuts. Reduced vibration improves Surface Finish and extends Insert Life by minimising wear. The secure seating also simplifies setup checks, so operators achieve consistent results with less rework. For users who value repeatability, this toolholder brings measurable process reliability. Compact Length with Enhanced Rigidity With an overall length of 125 mm and a cutting head width of 25 mm, the design balances accessibility and stiffness for many turning applications. The 20 mm x 20 mm shank dimensions provide a rigid connection to the toolpost, supporting heavier cuts without excessive deflection. This compact geometry makes the holder suitable for medium-duty internal and external turning where stable cutting conditions are required. Designed for Left-Hand Turning and Effective Chip Control The Turning Holder is specified for left-hand turning and features a 107.5° cutting angle that supports predictable chip flow and cutting forces. The specified angle helps direct chips away from the workpiece and tool, improving operational safety and reducing the need for manual intervention. Compatibility with standard DN-- 1506 inserts simplifies tooling selection and changeover in mixed-machine environments. Suited for Workshops and Precision Turning Tasks This holder is aimed at professional workshops and manufacturers that rely on indexable tooling for productivity. It is particularly useful where repeatable positioning, straightforward insert replacement and robust clamping are priorities. The straightforward ISO designation and standard interfaces allow easy integration into existing tool inventories, helping reduce setup time and tooling complexity. We recommend Teknik Makina's Turning Holder for precision left-hand turning operations — for technical advice or to confirm suitability for your application, contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930; WhatsApp +49 170 2837271. Turning Holder Brand: Teknik Makina SKU: D295TM For Indexable Inserts: DN-- 1506 Compatible Inserts: DN-- 1506 Overall Length: 125 mm Weight: 0.428 kg ISO Designation: DDHNL 2020 Secondary Designation: K15 Width: 20 mm Height: 20 mm Cutting Head Width: 25 mm Cutting Angle: 107.5° Cutting Direction: Left GTIN: 4061905150814 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Turning Holder from Teknik Makina is designed specifically for DN-- 1506 indexable inserts, ensuring correct seating and clamping for that insert family. Is the Turning Holder suitable for heavy-duty turning? The Teknik Makina Turning Holder offers a rigid 20 mm x 20 mm shank and a 125 mm overall length which supports medium-duty turning; for extreme heavy cuts, review machine and insert specifications with METAV Werkzeuge. How does the 107.5° cutting angle affect performance of the Turning Holder? A 107.5° cutting angle on the Teknik Makina Turning Holder promotes controlled chip flow and predictable cutting forces, which can enhance surface finish and reduce tool interference. Can METAV Werkzeuge advise on whether the Turning Holder fits my tooling setup? Yes, METAV Werkzeuge provides comprehensive consulting for the Teknik Makina Turning Holder — contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised support. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D295TM","sku":"D295TM","mpn":"DDHNL 2020","gtin13":"4061905150814","name":"Klemmhalter DDHNL 2020 107.5° DN-- 1506","description":"Turning holder for DN-- 1506 indexable inserts, 125 mm length, ISO DDHNL 2020; robust 20x20 mm body with 25 mm cutting head width; left-hand cut; weight 0.428 kg.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/05/8d/e2/62/62e28d05a9cff922f4706cc6/d295tm-main.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/da/7e/de/62/62de7eda33927e49dbf32783/d295tm-technische-zeichnung.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/3e/7e/de/62/62de7e3e148ec6b71020ff83/d295tm-artikelliste.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"For Indexable Inserts","value":"DN-- 1506"},{"@type":"PropertyValue","name":"Overall Length","value":"125 mm"},{"@type":"PropertyValue","name":"Weight","value":"0.428 kg"},{"@type":"PropertyValue","name":"ISO Designation","value":"DDHNL 2020"},{"@type":"PropertyValue","name":"Designation 2","value":"K15"},{"@type":"PropertyValue","name":"Width","value":"20 mm"},{"@type":"PropertyValue","name":"Height","value":"20 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"25 mm"},{"@type":"PropertyValue","name":"Cutting Direction","value":"Left"},{"@type":"PropertyValue","name":"Cutting Angle","value":"107.5°"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What inserts does this holder accept?","acceptedAnswer":{"@type":"Answer","text":"Compatible with DN-- 1506 indexable inserts."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 125 mm."}},{"@type":"Question","name":"What is the ISO designation?","acceptedAnswer":{"@type":"Answer","text":"ISO designation DDHNL 2020."}},{"@type":"Question","name":"What is the cutting direction?","acceptedAnswer":{"@type":"Answer","text":"Left-hand cutting direction."}},{"@type":"Question","name":"What are the main dimensions?","acceptedAnswer":{"@type":"Answer","text":"Body width 20 mm, height 20 mm, cutting head width 25 mm; weight 0.428 kg."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/klemmhalter-ddhnl-2020-107.5-dn--1506","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder"},{"@type":"Thing","name":"Indexable Inserts DN-- 1506"},{"@type":"Thing","name":"Left-Hand Cutting Tools"}],"mentions":[{"@type":"Thing","name":"Teknik Makina"},{"@type":"Thing","name":"ISO DDHNL 2020"},{"@type":"Thing","name":"K15 designator"}]}]}

Clamp Holder SDHC for DCMT Indexable Inserts — Turning Holder by Teknik Makina The Clamp Holder SDHC for DCMT Indexable Inserts is a robust Turning Holder engineered for secure clamping and precise 107.5° cutting performance in professional turning operations. Clamp holder for DCMT 11T3 inserts 107.5° cutting angle for accurate surfaces Removable screws enable quick insert change 125 mm overall length for versatile setups Stable clamping reduces vibration and rework Boost Productivity with Precise 107.5° Cutting The Clamp Holder SDHC for DCMT Indexable Inserts delivers measurable gains in Productivity by providing a consistent 107.5° cutting geometry that supports repeatable machining results. The defined cutting angle reduces manual adjustments and scrap rates, which translates into lower production costs and less rework. For workshops that measure output in cycle times and first-pass yield, this holder helps keep processes predictable and efficient. Fast Tool Changes and Reliable Clamping for Continuous Operation Designed with Quick Change in mind, the holder features easily removable screws that allow fast replacement of DCMT 11T3 inserts. This minimises machine downtime during regrinds or insert swaps and supports lean workflows on the shop floor. The Stable Clamping and precise seat alignment ensure the insert remains fixed during heavy cuts, reducing micro-movements that cause tool wear and poor surface finish. Versatile Use Across Materials and Turning Tasks This SDHC Clamp Holder is suitable for a broad range of turning applications, from finishing to semi‑roughing, and accepts the widely available DCMT 11T3 indexable inserts. Its 125 mm overall length and well-defined cutting-head width make it compatible with many turret and toolpost configurations, offering flexibility in set-up and part handling. Technical teams and operators will value the combination of adaptability and consistent cutting behaviour. Practical Advantages and What Indexable Inserts Mean for You Indexable inserts allow replacing only the cutting edge rather than the entire tool, which reduces tooling costs and shortens setup time. The holder’s compatibility with ISO-standard inserts provides access to a wide variety of grades and geometries for different workpiece materials. Choosing a system with standardised inserts supports predictable tool-life planning and easier inventory management, improving overall workshop economics. Highly recommended: For dependable turning performance and reduced setup time, choose the Teknik Makina Clamp Holder SDHC for DCMT Indexable Inserts — for expert advice and order support contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271). Technical Data Bezeichnung: Klemmhalter SDHC für DCMT Wendeplatten Marke: Teknik Makina SKU: D250TM For Indexable Inserts: DCMT 11T3 Compatible Inserts: DCMT 11T3 Overall Length: 125 mm Weight: 0.411 kg ISO Designation: SDHCR 2020 Secondary Designation: K11 Width: 20 mm Height: 20 mm Cutting-Head Width: 25 mm Cutting Angle: 107.5° Cutting Direction: right GTIN: 4061905153488 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Clamp Holder SDHC for DCMT Indexable Inserts from Teknik Makina? The Clamp Holder SDHC for DCMT Indexable Inserts by Teknik Makina is designed for standard DCMT 11T3 indexable inserts; using the specified insert type ensures correct seating, reliable clamping, and the intended 107.5° cutting geometry. How do I change the insert on the Teknik Makina Clamp Holder SDHC for DCMT Indexable Inserts? To replace an insert, loosen the removable clamping screw, remove the worn DCMT 11T3 insert, seat the new insert correctly and re-tighten the screw; this straightforward process minimises downtime and keeps the Turning Holder ready for immediate production. Which applications are best suited for the Clamp Holder SDHC for DCMT Indexable Inserts? The Clamp Holder SDHC for DCMT Indexable Inserts is suited to a wide range of turning tasks—finishing and semi‑roughing—across various materials; its stable clamping and standard insert compatibility make it a practical choice for demanding workshop environments. Need help selecting the right variant or further technical data for this Turning Holder? METAV Werkzeuge offers competent advice for tooling selection; if you’re unsure whether this Clamp Holder SDHC for DCMT Indexable Inserts matches your requirements, contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271 for personalised support. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D250TM","sku":"D250TM","mpn":"D250TM","gtin13":"4061905153488","name":"Clamp Holder SDHCR 2020 107.5° DCMT 11T3","description":"Clamp holder SDHC for DCMT indexable inserts, 107.5° cutting angle, 125 mm overall length, compatible with DCMT 11T3; robust aluminium construction; fast tool changes for high productivity.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/60/13/35/64/64351360edeb9298707ad344/d250tm-main.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/2c/7e/de/62/62de7e2c0f56dbb4de4dbeeb/d250tm-artikelliste.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/cf/7e/de/62/62de7ecf0f56dbb4de4dbf3d/d250tm-technische-zeichnung.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"For indexable inserts","value":"DCMT 11T3"},{"@type":"PropertyValue","name":"Cutting angle","value":"107.5°"},{"@type":"PropertyValue","name":"Overall length","value":"125 mm"},{"@type":"PropertyValue","name":"Cutting head width","value":"25 mm"},{"@type":"PropertyValue","name":"Width","value":"20 mm"},{"@type":"PropertyValue","name":"Height","value":"20 mm"},{"@type":"PropertyValue","name":"ISO designation","value":"SDHCR 2020"},{"@type":"PropertyValue","name":"Manufacturer","value":"Teknik Makina"},{"@type":"PropertyValue","name":"Weight","value":"0.411 kg"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What inserts fit this clamp holder?","acceptedAnswer":{"@type":"Answer","text":"Compatible with DCMT 11T3 indexable inserts."}},{"@type":"Question","name":"What is the cutting angle?","acceptedAnswer":{"@type":"Answer","text":"The clamp holder features a 107.5° cutting angle for precise surface finishes."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 125 mm."}},{"@type":"Question","name":"What is the cutting head width?","acceptedAnswer":{"@type":"Answer","text":"Cutting head width is 25 mm."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Manufacturer: Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/d250tm","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Clamp holder SDHC for DCMT indexable inserts"},{"@type":"Thing","name":"Allround turning applications"},{"@type":"Thing","name":"High productivity through quick insert change"}],"mentions":[{"@type":"Thing","name":"DCMT 11T3 inserts"},{"@type":"Thing","name":"107.5° cutting angle"},{"@type":"Thing","name":"SDHCR 2020 designation"},{"@type":"Thing","name":"Teknik Makina clamp holder"}]}]}

Turning Holder by Teknik Makina The Turning Holder is a precision clamping tool for DN-- 1506 indexable inserts, designed to speed up insert changes and deliver stable, repeatable turning results in professional workshops. Turning Holder for DN-- 1506 Inserts 107.5° Cutting Angle for precise surfaces Quick insert change with easy screw release Robust 125 mm length for stable positioning ISO DDHNR 2020 form, compatible system parts Reduce setup time with fast, reliable insert changes The Turning Holder enables a quick tool change workflow by allowing straightforward loosening and fastening of the clamping screw. This design reduces non-productive time during tool changes and supports higher machine uptime. By replacing only the worn insert instead of the complete tool, workshops achieve measurable savings in tooling costs and preparation time while maintaining consistent process flow. Achieve consistent surface quality and low vibration With a precise 107.5° cutting angle the holder promotes stable contact geometry between insert and workpiece, resulting in improved surface finish and reduced vibration. This advantage benefits high-precision turning tasks and helps maintain repeatability across serial parts. The stable seating of the insert also lowers the risk of micro-movements that can degrade dimensional accuracy during finishing operations. Broad compatibility and compact dimensions for flexible setups Designed for all ISO indexable inserts DN-- 1506, the holder follows the DDHNR 2020 family standard and fits into common tool systems. Key dimensions—125 mm overall length, 20 mm Width and 20 mm Height, with a 25 mm cutting head width—allow compact installation in tight turrets while preserving rigidity. This compatibility simplifies stocking and ensures rapid integration into existing turning centres. Intended for professional turning operations and efficient workflows This clamping solution is aimed at machinists and production engineers who require dependable insert retention and low retooling times. By enabling targeted replacement of cutting edges, the Turning Holder supports lean tool management and contributes to predictable production costs. For complex machining questions or specific set-up requirements, experienced advice is available to tailor the tool to your process. Strong recommendation: For precision turning tasks where changeover speed and surface quality matter, choose the Teknik Makina Turning Holder and consult METAV Werkzeuge for expert support — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical Information Bezeichnung: Klemmhalter Marke: Teknik Makina SKU: D096TM Passende Wendeschneidplatten: DN-- 1506 ISO Bezeichnung: DDHNR 2020 Bezeichnung 2: K15 Gesamtlänge: 125 mm Breite: 20 mm Höhe: 20 mm Schneidkopf Breite: 25 mm Schnittwinkel: 107.5° Schnittrichtung: right Gewicht: 0.428 kg GTIN: 4061905150784 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina and which operations are supported? The Turning Holder by Teknik Makina is compatible with ISO indexable inserts DN-- 1506 and is suitable for a wide range of turning operations including finishing and general turning, offering reliable seating and stable cutting geometry. How quickly can I change an insert on the Teknik Makina Turning Holder? Insert replacement on the Teknik Makina Turning Holder is designed to be fast: screws are accessible and the insert seats securely for rapid swap-out, reducing setup time and increasing machine availability. Is the Turning Holder suitable for high-precision finishing tasks? Yes, the Turning Holder from Teknik Makina, with its 107.5° cutting angle and rigid clamping, supports high-precision finishing by reducing vibration and ensuring repeatable insert positioning. Who can help if I need technical advice for integrating the Turning Holder into my workflow? METAV Werkzeuge provides competent consultation for the Teknik Makina Turning Holder; contact them at info@metav-werkzeuge.com, +49 2822 7131930 or WhatsApp +49 170 2837271 for tailored technical support. 107.5° Turning Holder DDHNR 2020 for DN-- 1506 Indexable Inserts, 125 mm – Teknik Makina

Turning Holder (Clamp Holder) by Teknik Makina Turning Holder (Clamp Holder) SCACR-F for CCMT Indexable Inserts — a robust 90° tool holder designed for precise turning operations and fast insert changes Turning Holder SCACR-F for CCMT Indexable Inserts 90° cutting angle for precise surface finish Compatible with CCMT 0602 and CCMT 09T3 inserts Robust clamp design for fast insert changes Increased Efficiency through Faster Setups and Lower Costs Designed for Professional Workshops, this holder reduces idle time by enabling rapid insert replacement and reliable seating. The SCACR-F geometry minimises rework and supports consistent chip control, which boosts Efficiency and overall Productivity on repetitive turning tasks. Because only the worn insert is replaced, tooling costs fall and machine uptime rises — a clear economic advantage for batch production. Stable Clamping for Consistent Surface Quality The 90° cutting angle and precise machining of the contact surfaces ensure a reproducible Plattensitz (insert seat) that prevents movement under load. This stability translates directly into improved Precision and a finer surface finish on turned components. For operations that demand repeatable accuracy, the holder’s rigid construction reduces vibration and supports reliable dimensional results. Broad Compatibility and Practical Handling Compatibility with CCMT 0602 (and CCMT 09T3) indexable inserts makes the holder versatile across a wide range of materials and cutting conditions. Indexable inserts are small, replaceable cutting tips that allow quick changes without regrinding; this holder secures them firmly with easily accessible screws for swift Tool Change. The clear layout and standard ISO designation SCACR 1010 simplify tooling choices and inventory management in busy shops. Engineered Reliability and Manufacturer Credentials Built by Teknik Makina, a producer with ISO 9001:2015-certified processes, this clamp system is manufactured to withstand industrial workloads. The compact dimensions and measured geometry (Width 10 mm, Height 10 mm, Total Length 110 mm) combine to deliver durability without unnecessary bulk. Workshops seeking dependable tooling will value the balance of strength and serviceability offered here. Strong recommendation: opt for the Teknik Makina Turning Holder for robust clamping and measurable productivity gains — for technical advice or to confirm suitability for your applications, contact METAV Werkzeuge’s expert team by eMail at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Technical Information and Specifications Bezeichnung: Turning Holder (Klemmhalter) SCACR-F for CCMT Indexable Inserts Marke: Teknik Makina SKU: D411TM ISO Bezeichnung: SCACR 1010 Bezeichnung 2 / Tool Holder Type: J06-F Suitable Inserts: CCMT 0602, CCMT 09T3 Total Length: 110 mm Width: 10 mm Height: 10 mm Cutting Head Width: 10 mm Cutting Angle: 90° Cutting Direction: Right Weight: 0.104 kg GTIN / EAN: 4061905153143 Manufacturer / Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person / Verantwortliche Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina and which sizes are supported? The Turning Holder from Teknik Makina is designed for CCMT Indexable Inserts, specifically compatible with CCMT 0602 and CCMT 09T3 sizes, ensuring broad Application flexibility for common turning tasks. How does the SCACR-F Turning Holder improve setup times in a workshop? The SCACR-F Turning Holder secures indexable inserts with an accessible clamping screw, allowing quick replacement of only the worn insert; this minimises Rüstzeiten and increases machine uptime for continuous Production. Is the Teknik Makina Turning Holder durable enough for industrial use? Yes, the Teknik Makina Turning Holder is produced under ISO 9001:2015-certified processes and features a robust clamp design and precise machining, delivering the durability required for frequent use in professional environments. Can METAV Werkzeuge provide technical support for selecting the right Turning Holder variant? METAV Werkzeuge offers expert consultation for the Turning Holder and related tooling; contact the team by eMail at info@metav-werkzeuge.com, by phone at +49 2822 7131930, or via WhatsApp at +49 170 2837271 for personalised advice. 110mm SCACR-F Turning Holder for CCMT 0602, 90° - Teknik Makina

Turning Holder SCACR-F for CCMT Indexable Inserts by Teknik Makina The Turning Holder SCACR-F is a right-hand clamping tool designed for secure turning operations with CCMT 09T3 indexable inserts, suited for precision metalworking in workshop and production environments. SCACR 1212 ISO designation with 90° cutting angle Compatible with CCMT 09T3 indexable inserts Compact 110 mm overall length for close working areas 12 mm tool shank: width, height and cutting head width Right-hand cutting direction for conventional turning setups Robust Design for Stable Turning and Repeatable Results The clamping system combines a SCACR 1212 geometry with a precise seating for CCMT 09T3 inserts, ensuring consistent insert alignment and repeatable cutting edge position. This stability reduces chatter and supports predictable toolpath results during finishing passes. The holder’s 90° cutting angle and compact 110 mm overall length make it suitable for operations where clearance and rigidity are both required. For machinists seeking reliable seating and predictable insert performance, this holder provides a straightforward technical foundation. Optimised Compatibility and Simple Tooling Integration Designed specifically for indexable carbide plates, the holder accepts CCMT 09T3 inserts and matches common lathe tool posts with a 12 mm shank profile. The ISO designation SCACR 1212 and the secondary reference J09-F facilitate correct selection and fast replacement in mixed tooling environments. Because the component is tailored to a widely used insert type, shops benefit from streamlined inventory management and faster tool changes, reducing machine downtime. Practical Use Cases and Target Users This clamping tool is aimed at professional workshops, maintenance departments and small batch production where turning flexibility and quick insert changes matter. Its configuration suits both roughing and finishing when paired with the appropriate CCMT grades, and the right-hand orientation aligns with standard turning setups. Operators who require compact tooling for constrained setups will find the holder’s form factor particularly advantageous. Clear Mounting and Maintenance Guidance Mounting the insert into the holder follows established indexable insert procedures: ensure the seating face is clean, place the CCMT 09T3 insert into the pocket, and secure with the recommended clamping screw to achieve correct orientation. The precise pocket geometry of the SCACR 1212 minimizes lateral play and simplifies re-indexing. Regular inspection of the seating surface and clamping screw torque keeps cutting performance consistent over repeated insert changes. For tailored advice on selecting the right Teknik Makina turning solution or for technical clarification, contact METAV Werkzeuge — expert support is available by eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 or WhatsApp: +49 170 2837271 Turning Holder SCACR-F for CCMT Indexable Inserts Brand: Teknik Makina SKU: D412TM Compatible Inserts: CCMT 09T3 ISO Designation: SCACR 1212 Secondary Designation: J09-F Overall Length: 110 mm Tool Shank Width: 12 mm Tool Shank Height: 12 mm Cutting Head Width: 12 mm Cutting Angle: 90° Cutting Direction: right Weight: 0.143 kg GTIN: 4061905153150 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Which inserts fit the Turning Holder SCACR-F from Teknik Makina? The Turning Holder SCACR-F by Teknik Makina is designed for CCMT 09T3 indexable inserts, ensuring correct seating and orientation when the insert and clamping screw are installed according to standard practice. Is the Turning Holder SCACR-F suitable for right-hand turning only? Yes, the Turning Holder SCACR-F from Teknik Makina features a right-hand cutting direction, making it appropriate for conventional right-hand turning operations on lathes. How long is the Turning Holder SCACR-F and what are its key dimensions? The Turning Holder SCACR-F by Teknik Makina has an overall length of 110 mm and a shank profile of 12 mm width and 12 mm height, with a cutting head width of 12 mm and a 90° cutting angle. Who can help if I need installation or selection advice for the Turning Holder SCACR-F? If you are unsure whether the Turning Holder SCACR-F meets your requirements or need additional technical data, METAV Werkzeuge provides expert consultation — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271. 110mm SCACR 1212 Turning Holder for CCMT 09T3, 90° Right, 12mm - Teknik Makina

Turning Holder by Teknik Makina — Clamping tool for indexable inserts The Turning Holder (SCLC for CCMT Indexable Inserts) is a compact clamping tool designed for precision turning with CCMT 0602 inserts on right-hand turning operations. Suitable for CCMT 0602 indexable inserts Compact 110 mm overall length for tight setups ISO designation SCLCR 1010 compatibility 95° cutting angle for stable turning 10 × 10 mm shank for rigid clamping Deliver consistent, measurable cutting performance The Turning Holder delivers repeatable results by combining a precise geometry with a stable clamping design. Its compatibility with CCMT 0602 indexable inserts ensures predictable cutting behaviour across a range of common steels and non-ferrous materials, while the 95° cutting angle reduces lateral forces to maintain toolpath stability. This focus on process reliability helps reduce rework and improves machining cycle consistency for production-oriented workshops. Compact design for flexible machine integration With an overall length of 110 mm and a square shank of 10 mm, this toolholder fits compact toolposts and short overhang set-ups. The reduced projection lowers vibration and enhances surface finish on turned parts, making it suitable for small to medium‑batch production and retrofit operations. The compact footprint also simplifies fixture planning on multi-tool turrets where space and clearance are critical. Engineered for quick insert orientation and secure clamping The clamping geometry is optimised for fast insert seating and firm retention, which minimises downtime during tool changes. The holder’s ISO code SCLCR 1010 indicates its form factor and orientation, aiding quick selection and replacement in standardised tooling systems. Operators benefit from reduced setup time and consistent tool position, supporting higher machine uptime and predictable tolerances. For skilled machinists and production environments Designed for professional workshops and CNC turning centres, this clamping tool helps machinists maintain process control when working with indexable inserts. The combination of a rigid 10 × 10 mm shank, proven insert format and right-hand cutting orientation yields a reliable solution for component finishing and light roughing tasks. For applications requiring specific cutting data or matching inserts, expert advice is available to ensure optimum results. Choose Teknik Makina’s Turning Holder for reliable clamping and consistent turning results — for tailored application support contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Comprehensive Technical Data Bezeichnung: Klemmhalter / Turning Holder Marke: Teknik Makina SKU: D422TM For Indexable Inserts: CCMT 0602 Suitable Inserts: CCMT 0602 Overall Length: 110 mm Weight: 0.106 kg ISO Designation: SCLCR 1010 Secondary Designation: J06-F Shank Width: 10 mm Shank Height: 10 mm Cutting Head Width: 10 mm Cutting Direction: right Cutting Angle: 95° GTIN: 4061905153181 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Turning Holder from Teknik Makina is designed for CCMT 0602 indexable inserts; this compatibility allows straightforward selection of common grades for general turning tasks and enables secure seating with the SCLCR 1010 form factor. Is the Turning Holder suitable for right-hand turning only? Yes, the Turning Holder specified here is configured for right cutting direction, making it suitable for conventional right-hand turning operations on lathes and CNC turning centres. How does the 95° cutting angle benefit machining? A 95° cutting angle reduces lateral thrust and improves stability during turning, which helps achieve consistent surface finish and prolongs insert life when using the Turning Holder with appropriate CCMT 0602 grades. Can METAV Werkzeuge advise on selecting matching inserts and cutting data? Absolutely — METAV Werkzeuge provides expert consultation for tooling selection and cutting parameters. Contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930, or WhatsApp +49 170 2837271 for personalised support. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D422TM","sku":"D422TM","mpn":"D422TM","gtin13":"4061905153181","name":"SCLC Turning Holder for CCMT 0602, 95° D422TM","description":"110mm SCLC turning holder for CCMT 0602 indexable inserts, 95° cutting angle, 10x10mm shank, weight 0.106 kg; suitable for right-hand cutting.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/2b/47/21/64/6421472b603068171553cbc5/d422tm-main.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/2e/7e/de/62/62de7e2ebd24461b3d5f7a16/d422tm-artikelliste.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/d0/7e/de/62/62de7ed00aced56449540ec1/d422tm-technische-zeichnung.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"For indexable inserts","value":"CCMT 0602"},{"@type":"PropertyValue","name":"Overall length","value":"110 mm"},{"@type":"PropertyValue","name":"Weight","value":"0.106 kg"},{"@type":"PropertyValue","name":"ISO designation","value":"SCLCR 1010"},{"@type":"PropertyValue","name":"Alternate designation","value":"J06-F"},{"@type":"PropertyValue","name":"Shank width","value":"10 mm"},{"@type":"PropertyValue","name":"Shank height","value":"10 mm"},{"@type":"PropertyValue","name":"Cutting head width","value":"10 mm"},{"@type":"PropertyValue","name":"Cutting angle","value":"95°"},{"@type":"PropertyValue","name":"Cutting direction","value":"right"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Which inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"Fits CCMT 0602 indexable inserts."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length 110 mm."}},{"@type":"Question","name":"What is the cutting angle?","acceptedAnswer":{"@type":"Answer","text":"Cutting angle 95° for standard turning operations."}},{"@type":"Question","name":"What are the shank dimensions?","acceptedAnswer":{"@type":"Answer","text":"Shank width 10 mm and shank height 10 mm (10x10 mm)."}},{"@type":"Question","name":"Is this for right- or left-hand cutting?","acceptedAnswer":{"@type":"Answer","text":"Designed for right-hand cutting."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/","dateModified":"2026-03-31T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder"},{"@type":"Thing","name":"Indexable Insert CCMT 0602 Compatibility"},{"@type":"Thing","name":"Teknik Makina Tooling"}],"mentions":[{"@type":"Thing","name":"SCLCR 1010 ISO designation"},{"@type":"Thing","name":"J06-F alternate designation"},{"@type":"Thing","name":"110 mm overall length"}]}]}

Turning Holder SCLC for CCMT Indexable Inserts by Teknik Makina The Turning Holder SCLC for CCMT Indexable Inserts is a left-hand toolholder designed to securely clamp CC-- 0602 indexable inserts for precise and repeatable turning operations. SCLCL 1010 design for secure clamping Compatible with CC-- 0602 indexable inserts Total length 110 mm for stable support 95° cutting angle optimized for left-hand turning Compact shank 10 x 10 mm with 12 mm head width Stable Clamping for Consistent Precision Designed around the SCLCL 1010 geometry, this toolholder delivers a reliably rigid Clamping interface that minimises micro-movement and vibration during cutting. Users benefit from improved Surface Finish and longer Insert Life because the holder secures the CC-- 0602 insert precisely at the load point. For workshops where repeatable tolerances matter, the resulting stability reduces rework and increases throughput. Compatibility that Simplifies Setup and Tooling With direct compatibility for CC-- 0602 indexable inserts and an industry-standard ISO designation, the holder integrates smoothly into existing tool setups. The clear match to common insert types reduces changeover time and avoids adapter requirements, so machine uptime improves. Technicians will appreciate that setup is straightforward and that insert seating is predictable, supporting faster tool change routines and consistent cutting results. Compact Dimensions for Better Access and Rigidity A compact shank dimension of 10 x 10 mm combined with a 110 mm overall length and a 12 mm cut head width offers a balance between accessibility and stiffness. This profile enables turning in tight fixture spaces while maintaining sufficient support to resist deflection. The 95° cutting angle designed for left-hand operations provides reliable chip flow and approach geometry that suits many external turning tasks. Built for Workshops and Precision Users This holder targets professional machinists, small-batch manufacturers and tooling specialists who require dependable clamping for indexable inserts. The robust construction supports frequent use, while the concise form factor helps when working on compact lathes or crowded toolposts. If specific machine compatibility or application advice is needed, METAV Werkzeuge provides expert consultation to ensure the holder meets application requirements. Choose Teknik Makina’s precision Turning Holder as the reliable backbone for your CC-- 0602 turning tasks — for tailored technical guidance contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Designation: Turning Holder (Klemmhalter) Brand: Teknik Makina SKU: D404TM For Indexable Inserts: CC-- 0602 Compatible Inserts: CC-- 0602 Total Length: 110 mm Weight: 0.105 kg ISO Designation: SCLCL 1010 Secondary Designation: J06 Width: 10 mm Height: 10 mm Cutting Head Width: 12 mm Cutting Direction: left Cutting Angle: 95° GTIN: 4061905153075 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts does the Turning Holder SCLC for CCMT Indexable Inserts by Teknik Makina accept? The Turning Holder SCLC for CCMT Indexable Inserts by Teknik Makina is designed specifically for CC-- 0602 indexable inserts, ensuring full compatibility and secure seating for those insert types. Is the Turning Holder SCLC for CCMT Indexable Inserts suitable for small lathes? Yes, the Turning Holder SCLC for CCMT Indexable Inserts from Teknik Makina features a compact 10 x 10 mm shank and 110 mm overall length, making the turning holder well-suited for tighter setups and smaller lathes where space is limited. Can METAV Werkzeuge advise on using the Turning Holder SCLC for CCMT Indexable Inserts in my application? Absolutely — METAV Werkzeuge offers expert consultation for the Turning Holder SCLC for CCMT Indexable Inserts by Teknik Makina; contact their team via info@metav-werkzeuge.com or +49 2822 7131930 for application-specific recommendations. What advantage does the 95° cutting angle provide with the Turning Holder SCLC for CCMT Indexable Inserts? The 95° cutting angle on the Turning Holder SCLC for CCMT Indexable Inserts produced by Teknik Makina improves approach geometry for left-hand turning, promoting controlled chip evacuation and stable cutting conditions. 95° Turning Holder SCLCL 1010 for CC-- 0602 Indexable Inserts, Left Cut, 110 mm - Teknik Makina

Turning Holder (Klemmhalter) — SCLC for CCMT Indexable Inserts by Teknik Makina The Turning Holder (Klemmhalter) is a compact right-hand tool holder engineered for precision turning with CC-- 09T3 indexable inserts in general workshop and industrial applications. SCLCR 1212 ISO designation for stable clamping Compatible with CC-- 09T3 indexable inserts 95° cutting angle for improved chip control Right-hand cutting direction for standard turning 12 mm shank with 16 mm cutting head width Stable clamping for consistent turning results The robust SCLCR 1212 design of this tool holder ensures a secure seat for CC-- 09T3 inserts, which translates into consistent machining accuracy and reduced vibration. A secure clamping system prevents insert movement during heavy cuts, so users achieve repeatable diameters and surface finish. This stability is especially beneficial when machining steels and cast materials where tool deflection would otherwise affect tolerances. Compact geometry that fits tight setups With an overall length of 110 mm and a compact 12 mm shank profile, this tool holder is tailored for operations where space is limited or tool overhang must be minimised. Its compactness allows closer approach to workpieces and better rigidity, resulting in improved tool life and more reliable finishing passes. Workshops with multi-spindle lathes or small turning centres will particularly benefit from the short, stable footprint. Clear specification for correct application The holder is designed for CC-- 09T3 indexable inserts and features a 95° cutting angle with right-hand cutting direction. For those unfamiliar: the cutting angle affects chip flow and contact area — a 95° angle helps direct chips away from the cutting edge while maintaining sufficient support behind the insert. This tool holder supports effective chip control and helps to protect the insert edge during interrupted cuts. Easy integration and practical handling Installation follows standard clamping procedures for SCLCR-style holders, and the 16 mm cutting head width provides a predictable seating surface for inserts. The design reduces setup time and simplifies tool changes, which supports higher uptime in production environments. If further compatibility checks or mounting advice are required, METAV Werkzeuge offers specialist support to ensure the holder matches machine and insert choices. For precision turning jobs, choose Teknik Makina’s Turning Holder for reliable clamping and consistent results — METAV Werkzeuge provides expert advice and technical support at info@metav-werkzeuge.com or +49 2822 7131930. Bezeichnung: Turning Holder (Klemmhalter) Marke/Hersteller: Teknik Makina SKU: D400TM For Indexable Inserts: CC-- 09T3 ISO Designation: SCLCR 1212 Overall Length: 110 mm Shank Width: 12 mm Shank Height: 12 mm Cutting Head Width: 16 mm Cutting Height: 16 mm Cutting Angle: 95° Cutting Direction: Right Weight: 0.14 kg GTIN: 4061905153013 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Turning Holder from Teknik Makina is designed to accept CC-- 09T3 indexable inserts; this compatibility ensures the insert seat and clamping geometry match for secure operation. Can the Teknik Makina Turning Holder be used for heavy cuts? The Turning Holder (Klemmhalter) by Teknik Makina features the SCLCR 1212 design and a 95° cutting angle, providing stable support that makes it suitable for many heavy-cut applications, while always observing appropriate cutting data. Is the Turning Holder suitable for small lathes and tight spaces? Yes, the compact 110 mm overall length and 12 mm shank of the Teknik Makina Turning Holder make it well suited for small lathes and setups where reduced overhang improves rigidity and finish. Who can help with mounting and technical questions about the Turning Holder? For mounting guidance or technical clarifications regarding the Turning Holder (Klemmhalter) from Teknik Makina, METAV Werkzeuge offers expert consultation — contact info@metav-werkzeuge.com, phone +49 2822 7131930, or WhatsApp +49 170 2837271. 110mm SCLCR 1212 Turning Holder for CC-- 09T3 Inserts, 95° - Teknik Makina

Turning Holder for CCMT Indexable Inserts by Teknik Makina Turning Holder for CCMT Indexable Inserts delivers a compact, robust solution for secure clamping of CCMT carbide inserts in medium-duty turning operations. Turning Holder SCLCR 1212 for CCMT 09T3 inserts 110 mm overall length for standard lathes 12 mm shank width and height 95° cutting angle for stable roughing Right-hand cutting direction for conventional turning Precise clamping for consistent Turning results The Turning Holder is engineered for repeatable accuracy and rigid clamping of CCMT 09T3 indexable inserts. With the SCLCR 1212 ISO designation and a 95° cutting angle, the toolholder reduces vibration and tool deflection, which improves Surface Finish and extends Insert Life. This leads to more reliable component tolerances and fewer reworks in batch production. Designed for workshop productivity and straightforward setup Workshops benefit from the compact 110 mm overall length and standardized 12 mm shank dimensions that simplify toolpost mounting and changeover. The holder's geometry supports efficient Chip Evacuation during turning, meaning longer uninterrupted runs and reduced machine downtime. Professionals seeking predictable performance in serial turning will find installation and orientation straightforward. Built for professional use with compatible carbide inserts Manufactured by Teknik Makina, this Turning Holder is optimized for CCMT 09T3 carbide inserts—indexable cutting elements commonly used for versatile turning tasks. For users unfamiliar with inserts: CCMT denotes a rhombic insert geometry with a 7° clearance, suitable for general-purpose turning. Using the correct insert type with this holder ensures secure seating and efficient cutting action. Mounting notes and operational tips for safe use When fitting the Turning Holder, ensure the right-hand cutting direction is observed and the clamping screw is torqued to the toolmaker's specification. The holder's 12 mm width and height give a compact footprint while maintaining rigidity; verify compatibility with the lathe toolpost before use. Regular inspection of the clamping interface prevents Seating Wear and helps maintain consistent Cutting Parameters. For reliable clamping and precision turning choose the Teknik Makina Turning Holder—contact METAV Werkzeuge for expert advice and tailored technical support via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Technical Data Designation: Turning Holder Brand: Teknik Makina SKU: D426TM Suitable Inserts: CCMT 09T3 ISO Designation: SCLCR 1212 Secondary Designation: J09-F Overall Length: 110 mm Shank Width: 12 mm Shank Height: 12 mm Cutting Head Width: 12 mm Cutting Angle: 95° Cutting Direction: Right Weight: 0.144 kg GTIN: 4061905153204 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina and which insert grade is recommended? The Turning Holder from Teknik Makina is designed for CCMT 09T3 indexable inserts; using a general-purpose carbide grade for steel turning is typical, while harder materials may require a tougher or coated grade to achieve optimal life with this Turning Holder. Is the Turning Holder suitable for automated lathe setups and what should be checked before use? Yes, the Turning Holder by Teknik Makina suits automated lathe setups provided the 110 mm length and 12 mm shank dimensions match the turret or toolpost. Verify tool projection and clamping compatibility before installation. How does the 95° cutting angle affect machining with the Teknik Makina Turning Holder? The 95° cutting angle of the Teknik Makina Turning Holder offers a robust cutting geometry that improves rigidity during heavy cuts, reducing vibration and enhancing Surface Finish when paired with suitable CCMT inserts. Who can I contact for technical advice about the Teknik Makina Turning Holder? For application support or additional technical details regarding the Teknik Makina Turning Holder, METAV Werkzeuge provides competent consultation—reach out via info@metav-werkzeuge.com or call +49 2822 7131930. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D426TM","sku":"D426TM","mpn":"D426TM","gtin13":"4061905153204","name":"Turning Holder SCLCR 1212 95° for CCMT 09T3 Inserts","description":"SCLC for CCMT indexable inserts; 110 mm overall length; 12x12 mm shank; right-hand, 95° cutting angle; lightweight 0.144 kg.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/2b/47/21/64/6421472b603068171553cbc5/d422tm-main.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/d0/7e/de/62/62de7ed00aced56449540ec1/d422tm-technische-zeichnung.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/2e/7e/de/62/62de7e2ebd24461b3d5f7a16/d422tm-artikelliste.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"Designation_en","value":"Turning Holder"},{"@type":"PropertyValue","name":"Designation_2_en","value":"SCLC for CCMT Indexable Inserts"},{"@type":"PropertyValue","name":"Compatible Inserts","value":"CCMT 09T3"},{"@type":"PropertyValue","name":"Overall Length","value":"110 mm"},{"@type":"PropertyValue","name":"Shank Width","value":"12 mm"},{"@type":"PropertyValue","name":"Shank Height","value":"12 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"12 mm"},{"@type":"PropertyValue","name":"Cutting Direction","value":"right"},{"@type":"PropertyValue","name":"Cutting Angle","value":"95°"},{"@type":"PropertyValue","name":"Weight","value":"0.144 kg"},{"@type":"PropertyValue","name":"ISO Designation","value":"SCLCR 1212"},{"@type":"PropertyValue","name":"Secondary Designation","value":"J09-F"},{"@type":"PropertyValue","name":"Manufacturer","value":"Teknik Makina"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"Compatible with CCMT 09T3 indexable inserts."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 110 mm."}},{"@type":"Question","name":"What are the shank dimensions?","acceptedAnswer":{"@type":"Answer","text":"Shank is 12 mm wide and 12 mm high."}},{"@type":"Question","name":"What is the cutting angle and direction?","acceptedAnswer":{"@type":"Answer","text":"Cutting angle is 95° and the holder is right-hand."}},{"@type":"Question","name":"What is the material weight?","acceptedAnswer":{"@type":"Answer","text":"Weight is approximately 0.144 kg."}}]},{"@type":"ItemPage","url":"https://metav-shop.de","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"SCLC for CCMT Indexable Inserts"},{"@type":"Thing","name":"Turning Holder SCLCR 1212"},{"@type":"Thing","name":"Teknik Makina Tooling"}],"mentions":[{"@type":"Thing","name":"CCMT 09T3"},{"@type":"Thing","name":"ISO SCLCR 1212"},{"@type":"Thing","name":"J09-F Secondary Designation"}]}]}

Turning Holder SDACR-F for DCMT Indexable Inserts by Teknik Makina The Turning Holder SDACR-F for DCMT Indexable Inserts is a precision toolholder designed for right-hand turning operations with DCMT 11T3 indexable inserts. SDACR 1212 Holder for DCMT 11T3 Inserts 110 mm Overall Length 12 mm Shank Width and Height 90° Cutting Angle, Right-Hand Robust Clamp Design for Secure Retention Secure clamping for consistent machining results Designed for stable insert retention, the SDACR 1212 delivers repeatable performance across medium-duty turning tasks. The precision-machined clamp keeps DCMT 11T3 inserts seated securely, reducing micro-movement that can cause chatter or inconsistent surface finish. This results in improved part accuracy and longer tool life, especially when repeatability and process stability are critical. Compact geometry that fits tight setups With an 110 mm Overall Length and a 12 mm cross-section, this toolholder is suitable for confined toolposts and recessed setups. Its compact dimensions enable closer turret positioning and better access to small-diameter workpieces, allowing workshops to maintain rigidity without sacrificing reach. The compact design supports efficient chip flow and simplifies tool changeover routines. Precision orientation and right-hand operation Engineered with a 90° Cutting Angle and Right-Hand cutting direction, the holder offers predictable cutting geometry for standard turning and facing operations. The fixed angle supports consistent tool engagement and simplifies process planning, so operators can rely on familiar cutting parameters and reduce setup iterations when switching between similar turning jobs. Built for compatibility and easy integration The holder is expressly made for DCMT 11T3 indexable inserts, enabling straightforward integration into existing tooling assortments. ISO designation SDACR 1212 and adapter reference J11-F help technicians identify the correct holder quickly, minimizing downtime during tool changes. The straightforward compatibility reduces inventory complexity and assists in standardising tooling across multiple machines. Target use cases and operator benefits Ideal for shops that require dependable, repeatable turning in medium-precision production, this holder supports machining of rotational components where surface quality and dimensional control matter. The robust clamp design improves insert retention during interrupted cuts, while the holder’s compactness allows its use in tight fixture arrangements—benefits that suit both contract manufacturers and in-house maintenance departments. Secure your machining consistency with the proven clamping reliability of Teknik Makina — choose this Turning Holder to enhance repeatability and machining quality, and contact METAV Werkzeuge for expert advice and support: info@metav-werkzeuge.com, Tel +49 2822 7131930, WhatsApp +49 170 2837271. Turning Holder SDACR-F for DCMT Indexable Inserts Brand: Teknik Makina SKU: D440TM Suitable Inserts: DCMT 11T3 ISO Designation: SDACR 1212 Secondary Designation: J11-F Overall Length: 110 mm Shank Width: 12 mm Shank Height: 12 mm Cutting Head Width: 12 mm Cutting Direction: Right-Hand Cutting Angle: 90° Weight: 0.135 kg Condition: New Availability: In Stock GTIN: 4061905153419 Label: Klemmhalter SDACR 1212 90° DCMT 11T3 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts are compatible with the Turning Holder SDACR 1212 from Teknik Makina? The Turning Holder SDACR 1212 by Teknik Makina is compatible with DCMT 11T3 indexable inserts, designed to accept the standard insert geometry and provide reliable clamping for right-hand turning applications. Can the Turning Holder SDACR-F for DCMT Indexable Inserts be used in tight toolpost arrangements? Yes, the Turning Holder SDACR-F for DCMT Indexable Inserts features an 110 mm overall length and a slim 12 mm cross-section, which makes the holder suitable for compact toolpost setups and limited-space turret positions. Does Teknik Makina offer support or documentation for the SDACR 1212 holder? Teknik Makina supplies technical specifications for the SDACR 1212 holder; for additional guidance or application-specific advice, METAV Werkzeuge provides competent consultation and can be contacted at info@metav-werkzeuge.com or +49 2822 7131930. Is the clamping mechanism on the SDACR 1212 suitable for interrupted cuts? The robust clamp design of the SDACR 1212 Turning Holder from Teknik Makina improves insert retention under variable cutting conditions, making it appropriate for operations that involve interrupted cuts and moderate machining forces. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D440TM","sku":"D440TM","mpn":"D440TM","gtin13":"4061905153419","name":"Turning Holder SDACR 1212 90° DCMT 11T3","description":"SDACR-F for DCMT indexable inserts; 110 mm overall length; for DCMT 11T3; 90° cutting angle; right-hand; 12x12 mm cross-section; robust clamping design by Teknik Makina.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/13/87/1d/64/641d8713eb4c191311cc52d1/d434tm-main.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/2c/7e/de/62/62de7e2c33927e49dbf3272f/d434tm-artikelliste.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/cf/7e/de/62/62de7ecf0f56dbb4de4dbf3e/d434tm-technische-zeichnung.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"For Indexable Inserts","value":"DCMT 11T3"},{"@type":"PropertyValue","name":"ISO Designation","value":"SDACR 1212"},{"@type":"PropertyValue","name":"Alternate Designation","value":"J11-F"},{"@type":"PropertyValue","name":"Overall Length","value":"110 mm"},{"@type":"PropertyValue","name":"Width","value":"12 mm"},{"@type":"PropertyValue","name":"Height","value":"12 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"12 mm"},{"@type":"PropertyValue","name":"Cutting Angle","value":"90°"},{"@type":"PropertyValue","name":"Cutting Direction","value":"right"},{"@type":"PropertyValue","name":"Weight","value":"0.135 kg"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"Designed for DCMT 11T3 indexable inserts."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 110 mm."}},{"@type":"Question","name":"What are the cross-section dimensions?","acceptedAnswer":{"@type":"Answer","text":"Width and height are 12 mm x 12 mm."}},{"@type":"Question","name":"What is the cutting angle and direction?","acceptedAnswer":{"@type":"Answer","text":"Cutting angle 90° with right-hand cutting direction."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder"},{"@type":"Thing","name":"SDACR-F for DCMT Indexable Inserts"},{"@type":"Thing","name":"Teknik Makina Tooling"}],"mentions":[{"@type":"Thing","name":"DCMT 11T3 Inserts"},{"@type":"Thing","name":"SDACR 1212"},{"@type":"Thing","name":"J11-F"}]}]}

Turning Holder SDACR 1212 for DCMT 0702 Inserts by Teknik Makina The Turning Holder SDACR 1212 is a robust tool holder designed for DCMT 0702 indexable inserts, providing stable support for right‑hand turning operations in precision turning applications. Turning Holder SDACR 1212 for DCMT 0702 inserts 110 mm Overall Length for Stable Support 90° Cutting Angle for Precise Turning Right‑Hand Configuration for Conventional Use 12 x 12 mm Shank for Secure Machine Clamping Reliable clamping for improved surface quality and tool life This clamping solution secures DCMT 0702 inserts with consistent pressure to reduce vibration and deflection, which directly improves surface finish and extends insert life. The SDACR 1212 geometry is engineered to keep cutting forces under control, so workshops achieve repeatable results and fewer tool changes. A single clear advantage is greater stability during moderate to demanding turning passes. Precise dimensions for seamless machine integration With an overall length of 110 mm and a 12 x 12 mm shank, the holder fits common turret and toolpost setups without complex adaptations. The compact footprint supports rigid mounting and predictable tool offsets, reducing setup time and simplifying program inputs. This focused dimensional design makes it straightforward to incorporate the holder into existing machining processes. Designed for professional turning tasks and versatile use The holder is primarily aimed at machine shops and industrial turning environments that use indexable carbide technology; it performs well for component finishing and medium‑duty roughing when paired with appropriate inserts. The right‑hand configuration aligns with standard turning directions, offering a dependable choice for production runs and repair work alike. Users benefit from reduced downtime through compatibility with widely available DCMT inserts. Robust construction and manufacturer backing for reliable operation Built and supplied in new condition by Teknik Makina, the holder emphasizes consistent manufacturing tolerances and ready availability. The solid construction supports routine workshop loads while the compact cutting‑head design at a 90° approach angle provides predictable chip flow and accessibility on short overhangs. For additional technical guidance or integration advice, METAV Werkzeuge provides expert consultation to ensure the holder meets specific application requirements. Choose the Teknik Makina Turning Holder SDACR 1212 for dependable precision in your turning processes — expert advice and support are available from METAV Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930 Technical Specifications for Workshop Integration Turning Holder Brand: Teknik Makina SKU: D436TM Compatible Inserts: DCMT 0702 Overall Length: 110 mm ISO Designation: SDACR 1212 Alternative Designation: J07-F Shank Width: 12 mm Height: 12 mm Cutting Head Width: 12 mm Cutting Angle: 90° Cutting Direction: Right Weight: 0.135 kg GTIN: 4061905153396 Condition: New Availability: In Stock Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts are compatible with the Turning Holder SDACR 1212 by Teknik Makina? The Turning Holder SDACR 1212 by Teknik Makina is designed to accept DCMT 0702 indexable inserts, ensuring straightforward replacement and wide availability of grades for different materials. Can the Turning Holder SDACR 1212 be used on standard turret lathes? Yes, the Turning Holder SDACR 1212 fits common toolposts and turret systems thanks to its 12 x 12 mm shank and 110 mm overall length, allowing easy integration into standard setups. Is the Turning Holder SDACR 1212 suitable for heavy material removal? The Turning Holder SDACR 1212 is optimized for stability and precision; while it supports medium‑duty operations when paired with appropriate DCMT inserts, extremely heavy cuts may require larger, purpose‑built tooling. Who can provide help with selecting the right Turning Holder SDACR 1212 setup? METAV Werkzeuge offers comprehensive advice for the Turning Holder SDACR 1212 and related tooling — contact them at info@metav-werkzeuge.com, by phone at +49 2822 7131930, or via WhatsApp at +49 170 2837271 for tailored support. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D436TM","sku":"D436TM","mpn":"D436TM","gtin13":"4061905153396","name":"Turning Holder SDACR 1212 90° for DCMT 0702, 110mm - Teknik Makina","description":"SDACR-F turning holder for DCMT 0702 indexable inserts; 110mm overall length, 90° cutting angle, 12x12mm shank, weight 0.135 kg.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/13/87/1d/64/641d8713eb4c191311cc52d1/d434tm-main.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/2c/7e/de/62/62de7e2c33927e49dbf3272f/d434tm-artikelliste.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/cf/7e/de/62/62de7ecf0f56dbb4de4dbf3e/d434tm-technische-zeichnung.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"Compatible Inserts","value":"DCMT 0702"},{"@type":"PropertyValue","name":"Overall Length","value":"110 mm"},{"@type":"PropertyValue","name":"Shank Width","value":"12 mm"},{"@type":"PropertyValue","name":"Shank Height","value":"12 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"12 mm"},{"@type":"PropertyValue","name":"Cutting Angle","value":"90°"},{"@type":"PropertyValue","name":"Direction","value":"right"},{"@type":"PropertyValue","name":"ISO Designation","value":"SDACR 1212"},{"@type":"PropertyValue","name":"Designation 2","value":"J07-F"},{"@type":"PropertyValue","name":"Weight","value":"0.135 kg"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"DCMT 0702 indexable inserts fit this SDACR-F holder."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"The holder has an overall length of 110 mm."}},{"@type":"Question","name":"What are the shank dimensions?","acceptedAnswer":{"@type":"Answer","text":"Shank width and height are 12 mm each (12x12 mm)."}},{"@type":"Question","name":"What is the cutting angle?","acceptedAnswer":{"@type":"Answer","text":"The holder features a 90° cutting angle."}},{"@type":"Question","name":"Which cutting direction is supported?","acceptedAnswer":{"@type":"Answer","text":"This model is for right-hand cutting."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/turning-holder-sdacr-f-dcmt-0702","dateModified":"2026-03-31T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder SDACR 1212"},{"@type":"Thing","name":"DCMT 0702 Compatibility"},{"@type":"Thing","name":"110 mm Overall Length"}],"mentions":[{"@type":"Thing","name":"ISO Designation SDACR 1212"},{"@type":"Thing","name":"J07-F designation"},{"@type":"Thing","name":"Right-hand cutting"}]}]}

Clamp Holder SDACR-F for DCMT Indexable Inserts by Teknik Makina The Clamp Holder is a 90° turning holder designed for DCMT indexable inserts, delivering precise workholding for metal turning applications. Suitable for DCMT 0702 and DCMT 11T3 inserts 90° cutting angle for accurate surface finishes SDACR-F configuration for stable clamping 110 mm overall length for versatile setups Quick insert change to reduce downtime Precision that improves surface quality and repeatability The Clamp Holder from Teknik Makina ensures consistent Insert Positioning so each cut produces a repeatable, high-quality surface. Thanks to the SDACR-F design and a fixed 90° Cutting Angle, the insert seats reliably and reduces vibration during turning, which directly improves surface finish and dimensional accuracy. This stability benefits workshops that demand reproducible results across series production while keeping rework rates low. Faster tool changes — less production downtime With an accessible clamping screw and precisely machined seat, changing a worn DCMT insert is straightforward and fast. The holder’s design prioritises quick Insert Exchange, meaning operators spend less time on setup and more time machining. For operations where cycle time and tool-change frequency affect throughput, this holder translates directly into higher productivity and lower unit costs. Built for right-hand turning and diverse materials Designed for right-hand cutting direction, this clamp holder performs reliably across a range of ferrous and non-ferrous materials when paired with appropriate DCMT geometry. The SDACR-F geometry supports robust engagement with the insert, making it suitable for general turning tasks as well as finishing passes where surface quality matters. Users benefit from a versatile turning solution that adapts to common shop requirements. Compact dimensions with industrial-grade construction At 110 mm overall length and a 10 mm tool shank profile (width, height, and cutting-head width), the holder offers a compact footprint while maintaining rigidity. The compact design helps reduce overhang and bending moments, improving tool life and cutting stability. For shops aiming to balance accessibility in tight setups and the need for a strong clamping solution, this holder delivers a durable option that supports longer insert life. Choose Teknik Makina’s Clamp Holder SDACR-F for reliable, precise turning — for personalised advice and rapid support contact METAV Werkzeuge via eMail: info@metav-werkzeuge.com or phone: +49 2822 7131930, WhatsApp: +49 170 2837271. Technical information Bezeichnung: Clamp Holder SDACR-F for DCMT Indexable Inserts Brand: Teknik Makina SKU: D434TM Suitable Inserts: DCMT 0702, DCMT 11T3 Overall Length: 110 mm ISO Designation: SDACR 1010 Alternative Designation: J07-F Width: 10 mm Height: 10 mm Cutting Head Width: 10 mm Cutting Angle: 90° Cutting Direction: Right GTIN: 4061905153389 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Which indexable inserts fit the Clamp Holder SDACR-F from Teknik Makina? The Clamp Holder SDACR-F by Teknik Makina accepts standard DCMT 0702 and DCMT 11T3 indexable inserts, making it compatible with widely used geometries for turning and finishing. Is the Clamp Holder SDACR-F suitable for finishing cuts? Yes, the SDACR-F Clamp Holder from Teknik Makina, with its 90° cutting angle and stable clamping, is well suited for finishing passes where surface quality and dimensional control are important. How quick is the insert change process with this turning holder? Teknik Makina’s Clamp Holder SDACR-F is designed for fast insert exchange: the insert seats precisely and the clamping screw is easy to access, which reduces changeover time and keeps production moving. Who can I contact for technical advice about the Clamp Holder SDACR-F? For technical recommendations or help determining if the Clamp Holder SDACR-F from Teknik Makina meets specific requirements, contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930, or message via WhatsApp +49 170 2837271. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D434TM","sku":"D434TM","mpn":"D434TM","gtin13":"4061905153389","name":"Clamp Holder SDACR 1010 90° for DCMT 0702","description":"110mm clamp holder, SDACR-F for DCMT indexable inserts, 90° cutting angle; robust steel construction for precise turning operations.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/13/87/1d/64/641d8713eb4c191311cc52d1/d434tm-main.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/2c/7e/de/62/62de7e2c33927e49dbf3272f/d434tm-artikelliste.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/cf/7e/de/62/62de7ecf0f56dbb4de4dbf3e/d434tm-technische-zeichnung.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"Length","value":"110 mm"},{"@type":"PropertyValue","name":"Weight","value":"0.97 kg"},{"@type":"PropertyValue","name":"Compatible Inserts","value":"DCMT 0702, DCMT 11T3"},{"@type":"PropertyValue","name":"ISO Designation","value":"SDACR 1010"},{"@type":"PropertyValue","name":"Tool Shank Designation","value":"J07-F"},{"@type":"PropertyValue","name":"Width","value":"10 mm"},{"@type":"PropertyValue","name":"Height","value":"10 mm"},{"@type":"PropertyValue","name":"Cutting Edge Width","value":"10 mm"},{"@type":"PropertyValue","name":"Cutting Angle","value":"90°"},{"@type":"PropertyValue","name":"Cutting Direction","value":"right"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Which inserts fit this clamp holder?","acceptedAnswer":{"@type":"Answer","text":"Compatible with DCMT 0702 and DCMT 11T3 indexable inserts."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 110 mm."}},{"@type":"Question","name":"What is the cutting angle?","acceptedAnswer":{"@type":"Answer","text":"The holder is set to a 90° cutting angle for precise surface machining."}},{"@type":"Question","name":"What material and weight does it have?","acceptedAnswer":{"@type":"Answer","text":"Robust steel construction with a weight of 0.97 kg."}},{"@type":"Question","name":"What is the ISO designation?","acceptedAnswer":{"@type":"Answer","text":"ISO designation SDACR 1010; tool shank designation J07-F."}}]},{"@type":"ItemPage","url":"https://metav-shop.de","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Clamp Holder SDACR-F Series"},{"@type":"Thing","name":"Turning Applications"},{"@type":"Thing","name":"High-precision Steel Tooling"}],"mentions":[{"@type":"Thing","name":"DCMT 0702 Indexable Inserts"},{"@type":"Thing","name":"DCMT 11T3 Compatibility"},{"@type":"Thing","name":"SDACR 1010 ISO Designation"},{"@type":"Thing","name":"J07-F Shank Designation"}]}]}

Clamping Holder (Turning Holder) by Teknik Makina The Clamping Holder is a robust turning tool designed for secure use with DCMT 11T3 indexable inserts in left-hand turning applications. Clamping Holder SDJCL 1212 for DCMT 11T3 inserts 110 mm Overall Length for Stable Support 93° Cut Angle for Accurate Left-Hand Turning 12 x 12 mm Shank for Compact Rigidity 16 mm Cutting Head Width for Robust Clamping Precision and Repeatability for Production Turning The Clamping Holder delivers consistent results by combining a rigid 12 x 12 mm shank with a 16 mm Cutting Head Width, which together minimize vibration and tool deflection. This rigidity ensures repeatable tolerance adherence across long production runs, reducing scrap rates and rework. The 93° Cut Angle supports stable chip formation in left-hand turning, so setup checks are less frequent and cycle times remain predictable. For machinists seeking reliable part-to-part consistency, this toolholder offers measurable process stability. Faster Setup and Clear Compatibility to Save Time Compatibility with DCMT 11T3 indexable inserts and the ISO designation SDJCL 1212 simplifies tooling decisions and inventory management. Engineers benefit from fewer adapter trials because the holder accepts a widely used insert geometry, enabling quick insert changes and alignment. The overall length of 110 mm provides solid support while maintaining accessibility for varied machine configurations. Clear interface dimensions translate into shorter machine downtime during tooling changes and faster ramp-up after maintenance. Designed for Shops That Demand Robustness and Control Small and medium-sized workshops as well as dedicated turning cells will gain from the holder’s compact footprint and sturdy clamping system. The geometry favors turning operations where left-hand cutting is required and where tight clamping pressure is critical. Since the toolholder is engineered for indexable inserts, it supports cost-effective tool management: cutters can be rotated or replaced without removing the entire holder, lowering total tooling cost per part. This makes the solution particularly suitable for batch production and component families with recurring turning tasks. Expert Support and Practical Advice When Needed When technical details or application recommendations are required, METAV Werkzeuge provides competent, personalised consultation to ensure the holder meets specific process demands. For example, guidance on suitable insert grades or optimal cutting parameters for particular steels can prevent premature edge wear and extend insert life. If there is any uncertainty whether this Turning Holder matches a machine’s turret or a workpiece requirement, METAV Werkzeuge is available to assist with measurements, setup tips, and procurement advice. Choose the Teknik Makina Turning Holder for dependable, precision turning — contact METAV Werkzeuge for tailored guidance via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271. Technical Specifications Bezeichnung: Clamping Holder Marke: Teknik Makina SKU: D362TM Compatible Inserts: DCMT 11T3 ISO Designation: SDJCL 1212 Bezeichnung 2: J11 Overall Length: 110 mm Shank Width: 12 mm Shank Height: 12 mm Cutting Head Width: 16 mm Cutting Direction: Left Cutting Angle: 93° Weight: 0.132 kg Availability: in Stock Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Clamping Holder from Teknik Makina? The Clamping Holder by Teknik Makina is designed to accept DCMT 11T3 indexable inserts; this compatibility ensures straightforward insert selection and interchangeability in standard turning setups. Is the Teknik Makina Turning Holder suitable for left-hand turning only? The Teknik Makina Turning Holder is specified with a left cutting direction and a 93° Cut Angle, making it ideal for left-hand turning operations where that orientation is required. How does the SDJCL 1212 designation affect mounting? The SDJCL 1212 ISO designation for the Teknik Makina Clamping Holder defines the holder geometry and interface, helping users verify fitment with turrets and adapters and streamlining tooling compatibility checks. Can METAV Werkzeuge advise on cutting parameters for this holder? Yes, METAV Werkzeuge offers expert consultation for the Teknik Makina Turning Holder, including recommendations on insert grades and cutting parameters to optimise tool life and part quality. 110mm SDJCL 1212 Turning Holder For DCMT 11T3, 93° - Teknik Makina

Turning Holder (Klemmhalter) — SDJCR 1212 for DCMT 0702 by Teknik Makina The Turning Holder SDJCR 1212 is a right-hand clamping solution designed for precision external turning with DCMT 0702 indexable inserts. SDJCR 1212 for DCMT 0702 inserts 110 mm overall length for stable support Right-hand cutting, 93° cutting angle 12×12 mm clamping head for reliable fit Flat design reduces interference during turning Precision and stability for consistent turning results This clamping solution delivers precision through a dedicated ISO designation SDJCR 1212 and compatibility with DCMT 0702 indexable inserts. The combination of a 12×12 mm clamping head and a 110 mm overall length ensures a stable support during external turning, which reduces vibration and improves surface quality. Users benefit from repeatable positioning and reliable chip control, making setup times shorter and part tolerances easier to maintain. Compact flat design that improves accessibility Thanks to its flat execution, the holder provides reduced profile height and improved tool access in confined setups. The 12 mm head width and 12 mm overall height enable closer approach to the workpiece without sacrificing clamping security. This compact design supports machining in tight fixtures and helps avoid collisions, so operators achieve cleaner contours and fewer interruptions during batch production. Ideal choice for workshops and CNC turning applications Workshops, small-batch manufacturers and maintenance departments find this solution well suited for general turning tasks with indexable inserts. The holder’s right-hand cutting orientation and 93° cutting angle are chosen to match common turning operations, providing a straightforward integration into existing tool magazines and turret stations. If you need guidance on fitment or machine compatibility, METAV Werkzeuge offers expert consultation and technical support. Robust technical fit for industrial usage Engineered for durability, the holder combines geometric stability with practical mounting features to sustain machining forces during external turning. The ISO-form SDJCR 1212 and the specified cutting angle support predictable tool behaviour and long tool life when used with appropriate DCMT 0702 inserts. For optimal results, pair the holder with inserts rated for the intended material and cutting parameters to ensure efficient chip evacuation and consistent surface finish. We recommend Teknik Makina’s SDJCR clamping solution for reliable, precision turning—contact METAV Werkzeuge for personalised technical advice and ordering support: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Designation: Klemmhalter / Turning Holder Brand: Teknik Makina SKU: D454TM For Indexable Inserts: DCMT 0702 Compatible Inserts: DCMT 0702 Overall Length: 110 mm Weight: 0.131 kg ISO Designation: SDJCR 1212 Secondary Designation: J07-F Width: 12 mm Height: 12 mm Cutting Head Width: 12 mm Cutting Direction: Right Cutting Angle: 93° GTIN: 4061905153457 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Is the Turning Holder (Klemmhalter) by Teknik Makina compatible with DCMT 0702 inserts? Yes. The Turning Holder (Klemmhalter) from Teknik Makina is designed specifically for DCMT 0702 indexable inserts and secures them in the SDJCR 1212 pocket for stable external turning. What are the main dimensions and fit of the Teknik Makina Turning Holder (Klemmhalter)? The Teknik Makina Turning Holder (Klemmhalter) features a 12×12 mm clamping head, 110 mm overall length and the SDJCR 1212 ISO form, providing a compact and reliable fit for standard toolholders and turrets. Can I use the Turning Holder (Klemmhalter) for both manual and CNC lathes? Yes. The Turning Holder (Klemmhalter) by Teknik Makina is suitable for manual setups and CNC turning stations, offering a flat design that helps with accessibility in tight fixtures and consistent clamping for automated operations. Who should I contact if I need help selecting the right holder or inserts? For tailored advice, contact METAV Werkzeuge. The team supports selection and compatibility questions for the Turning Holder (Klemmhalter) by Teknik Makina via info@metav-werkzeuge.com or +49 2822 7131930. 93° SDJCR 1212 Turning Holder for DCMT 0702 Inserts, 110mm Length - Teknik Makina

Turning Holder SDJCR 1212 (for DCMT 11T3 indexable inserts) A robust Turning Holder engineered for precision external turning and secure clamping of DCMT 11T3 indexable inserts. SDJCR 1212 compatible with DCMT 11T3 110 mm Overall Length for improved accessibility 12×12 mm Shank for compact toolposts 93° Cutting Angle for stable engagement Right-hand Cutting orientation Precise Clamping for Improved Surface Finish The Turning Holder SDJCR 1212 is designed to secure DCMT 11T3 Inserts with consistent Clamping force, which reduces vibration and improves Surface Finish during turning operations. Its defined geometry and stable insert seat enable reliable Cutting engagement and help maintain tool life by preventing micro-movement at the Insert interface. This results in better Accuracy on finished parts and fewer rework cycles, making the toolholder suitable for high-precision machining tasks. Compact Dimensions for Confined Setups With a Shank of 12×12 mm and an Overall Length of 110 mm, this toolholder is tailored for tight Turret configurations and close-proximity turning where space is limited. The compact profile allows for easier access to narrow workpieces while preserving necessary clearance for tooling, operators and fixtures. This compact design supports efficient machine layout planning and minimizes the need for frequent repositioning, particularly in batch production and repair jobs. Stable Geometry and Repeatable Performance Built to ensure Repeatability, the holder’s 93° Cutting Angle and precise seat alignment deliver reproducible cutting conditions across repeated setups. The simple but robust construction reduces setup time and keeps process variables low, which benefits shops that prioritise consistent tolerances. Combined with DCMT 11T3 Inserts, this holder provides a stable platform for turning, facing and light profiling operations in general engineering and maintenance contexts. Application Focus and Intended Users Designed by Teknik Makina, this turning tool is aimed at machinists, job shops and maintenance departments that require a dependable and compact solution for indexable Insert turning. The SDJCR 1212 proves particularly effective for external turning of shafts, shoulders and small-diameter features where controlled Chip formation and tool access are critical. For complex requirements or integration into a specific machine setup, METAV Werkzeuge offers expert technical guidance to match tooling to the task. Strong recommendation: choose the technical reliability of Teknik Makina’s Turning Holder SDJCR 1212 for precision turning — for personalised advice and ordering, contact METAV Werkzeuge by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 Bezeichnung: Turning Holder Marke: Teknik Makina SKU: D457TM Compatible Inserts: DCMT 11T3 ISO Designation: SDJCR 1212 Alternate Designation: J11-F Overall Length: 110 mm Shank Width: 12 mm Shank Height: 12 mm Cutting Head Width: 12 mm Cutting Angle: 93° Cutting Direction: Right Weight: 0.134 kg GTIN: 4061905153471 Availability: in Stock Condition: new Eclass: 21181004 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What Inserts fit the Turning Holder from Teknik Makina? The Teknik Makina Turning Holder SDJCR 1212 is designed to accept DCMT 11T3 indexable inserts, providing a secure seat and correct rake alignment for typical external turning operations. Is the SDJCR 1212 suitable for use in compact Turrets? Yes, the SDJCR 1212 Turning Holder from Teknik Makina features a 12×12 mm Shank and a compact 110 mm Overall Length, making it well suited for confined Turret setups where clearance is limited. Can METAV Werkzeuge help with selection and compatibility? METAV Werkzeuge supports customers with technical advice for the Teknik Makina Turning Holder SDJCR 1212 and can assist in confirming compatibility with specific lathes or Insert grades via email or phone. What cutting direction does the holder support? The Teknik Makina SDJCR 1212 Turning Holder is configured for Right-hand Cutting direction with a 93° Cutting Angle to ensure stable engagement and predictable Chip formation. 93° SDJCR 1212 Turning Holder for DCMT 11T3 Inserts, 110 mm - Teknik Makina

Turning Holder — SDJC for DCMT Indexable Inserts (Teknik Makina) The Turning Holder is a precision clamping tool designed for use with DCMT 11T3 indexable inserts, offering stable right-hand turning for workshop and production applications. Turning Holder SDJCR 1212 for DCMT 11T3 inserts 110 mm overall length for standard setups Right-hand cutting with 93° cutting angle 12 x 12 mm shank and 16 mm cutting head width Robust construction by Teknik Makina Stable Clamping and Precise Geometry for Reliable Turning The holder features the SDJCR 1212 ISO designation and a compact 12 x 12 mm shank that ensures a secure fit in common tool posts. This precise geometry reduces vibration and runout, which improves surface finish and extends Insert life. For users unfamiliar with toolholder codes: SDJCR 1212 indicates the holder style and shank dimensions, while the matching DCMT 11T3 inserts are the removable cutting tips that allow fast replacement without regrinding. Designed for Production Use and Workshop Flexibility With an overall length of 110 mm and a 16 mm cutting head width, this holder suits a broad range of turning operations from finishing to light roughing. The right-hand cutting orientation and 93° cutting angle make it particularly effective for conventional turning tasks where consistent chip flow and tool clearance are required. Operators benefit from predictable cutting behaviour and simplified setup when integrating the holder into existing tooling systems. Clear Benefits for Machinists and Small Series Manufacturers By combining a standardized ISO mount with robust manufacturing by Teknik Makina, this toolholder offers repeatable positioning and quick insert changes, reducing downtime during tool swaps. The stable clamping reduces insert wear, which lowers per-part tooling costs over medium production runs. For shops transitioning from brazed tools to indexable systems, this holder provides an accessible step with familiar handling and fast maintenance. Who Should Choose This Holder and How It Improves Workflow This Turning Holder is aimed at professional machinists, job shops and maintenance departments that rely on modular tooling for turnaround and versatility. Its compact shank and standardized interface make it suitable for limited-space setups and retrofit projects. When paired with correctly specified DCMT inserts, users achieve consistent surface quality and predictable tool life, supporting tighter production tolerances and fewer reworks. We recommend the Teknik Makina Turning Holder SDJCR 1212 for precision turning applications—contact METAV Werkzeuge for personalised advice and technical support via eMail info@metav-werkzeuge.com, telephone +49 2822 7131930 or WhatsApp +49 170 2837271. Technical Information Designation: Klemmhalter Brand: Teknik Makina SKU: D222TM Suitable Inserts: DCMT 11T3 ISO Designation: SDJCR 1212 Secondary Designation: J11 Overall Length: 110 mm Weight: 0.132 kg Shank Width: 12 mm Shank Height: 12 mm Cutting Head Width: 16 mm Cutting Height: 20 mm Cutting Direction: Right Cutting Angle: 93° GTIN: 4061905153242 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Teknik Makina Turning Holder is designed for DCMT 11T3 indexable inserts; using these recommended inserts ensures correct seating and optimal cutting geometry with the SDJCR 1212 mounting. Can the SDJCR 1212 holder be used for finish turning? Yes, the SDJCR 1212 Turning Holder from Teknik Makina, combined with appropriate DCMT inserts and cutting parameters, provides the stability and surface finish quality required for many finishing operations. Is the mounting size compatible with standard tool posts? The Teknik Makina Turning Holder uses a 12 x 12 mm shank and ISO-style configuration, which matches common tool post systems; this allows straightforward integration into typical lathe setups. Who can help determine the right insert and parameters for this Turning Holder? METAV Werkzeuge offers expert consultation for the Teknik Makina Turning Holder and can advise on insert selection, cutting speeds and feeds; contact them at info@metav-werkzeuge.com or +49 2822 7131930. 110mm SDJCR 1212 Turning Holder for DCMT 11T3, 93° Right - Teknik Makina

Klemmhalter (Turning Holder) by Teknik Makina The Klemmhalter (Turning Holder) secures DC-- 11T3 indexable inserts for precise turning in compact tool setups. Klemmhalter SDNCN 1212 for DC-- 11T3 inserts 110 mm Overall Length for Compact Setups 12 mm Width and 12 mm Height for Precise Seating 6 mm Cutting-Head Width, 62.5° Cutting Angle Compatible with Teknik Makina Tool Systems Precision Clamping for Consistent Cycle Times The Klemmhalter (Turning Holder) with ISO designation SDNCN 1212 is engineered to deliver repeatable positioning and reliable clamping of DC-- 11T3 indexable inserts. This consistency reduces setup variance and shortens cycle times on CNC lathes, so shops benefit from predictable part quality. The robust tool geometry and defined 62.5° cutting angle contribute to stable cutting conditions and lower scrap rates. Compact Design That Fits Tight Tool Posts With an 110 mm overall length and a compact cross-section, this Turning Holder fits restricted turret spaces and multi-station turrets without compromising rigidity. The 12 mm Width and 12 mm Height provide a slim but sturdy footprint, while the 6 mm cutting-head width ensures the holder can accept small, precise inserts—ideal where tool clearance and accessibility matter most. Built for Professional Workshops and Industrial Use Designed for machinists and production engineers, the holder supports quick insert changes and consistent repeatability, making it suitable for small-batch manufacturing and series production alike. Compatibility with Teknik Makina tool systems simplifies procurement and tool management, and the standardised holder designation allows easy replacement and interchangeability across machines. Clear Guidance on Inserts and Functionality Indexable inserts marked DC-- 11T3 are the correct match for this holder; they seat against the front and side locating faces to ensure proper geometry during turning operations. For operators less familiar with tooling nomenclature: indexable inserts are replaceable cutting tips, and the holder’s geometry defines the approach and clearance—hence the importance of matching the insert type and respecting the 62.5° tool angle for intended chip flow and surface finish. For reliable, high-precision turning choose the Teknik Makina Klemmhalter SDNCN 1212 — for personalised advice and rapid availability contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp: +49 170 2837271). Technical Information Bezeichnung: Klemmhalter (Turning Holder) Marke: Teknik Makina SKU: D118TM Passende Wendeschneidplatten / Compatible Inserts: DC-- 11T3 ISO Bezeichnung: SDNCN 1212 Alternative Bezeichnung: J11 Gesamtlänge / Overall Length: 110 mm Breite / Width: 12 mm Höhe / Height: 12 mm Schneidkopf Breite / Cutting-Head Width: 6 mm Schnittwinkel / Cutting Angle: 62.5° Gewicht / Weight: 0.131 kg Verfügbarkeit / Availability: in Stock Zustand / Condition: new GTIN: 4061905153341 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Which inserts are compatible with the Klemmhalter (Turning Holder) by Teknik Makina? The Klemmhalter (Turning Holder) from Teknik Makina is designed for DC-- 11T3 indexable inserts; using the specified DC-- 11T3 inserts ensures correct seating and the intended cutting geometry. How do I mount the Teknik Makina Klemmhalter SDNCN 1212 on my turret? Mount the Teknik Makina Klemmhalter SDNCN 1212 into a compatible tool slot and secure it with the prescribed clamping screw; ensure the holder’s locating faces align with the turret reference to maintain the correct tool height and repeatability. What materials is the Klemmhalter suitable for machining? The Klemmhalter (Turning Holder) by Teknik Makina accepts DC-- 11T3 inserts appropriate for a wide range of turning applications; select the matching insert grade for the specific material (steel, stainless, or non-ferrous) to optimize tool life and surface finish. Need help selecting the right configuration for your machine? METAV Werkzeuge offers expert advice for the Teknik Makina Klemmhalter (Turning Holder) — contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised support and technical information. 62.5° SDNCN 1212 Turning Holder for DC-- 11T3, 110 mm Length, 12x12 mm - Teknik Makina

Turning Holder — Clamping Holder for VBMT 1103 Inserts by Teknik Makina Turning Holder is a precision clamping holder engineered to secure VBMT 1103 indexable inserts for reliable left-hand turning in metalworking applications. Compatible with VBMT 1103 inserts Total length 110 mm for extended reach ISO designation SVJBL 1212 for clear specification 12 mm Width and 12 mm Height for stable clamping 16 mm Cutting Head Width with 93° cutting angle Precise Clamping for Consistent Turning Results The Turning Holder delivers a stable interface between Tool and Insert, reducing vibration and improving surface finish. Designed specifically for VBMT 1103 indexable inserts, the clamp geometry ensures consistent seat position and repeatable tool life. The left-hand orientation and 93° cutting angle support predictable chip flow in common turning operations, which helps maintain tolerance and reduces rework. Technicians benefit from reliable repeatability across batches. Compact Design with Robust Specification Built with a compact overall length of 110 mm, this holder balances reach and stiffness for medium-duty turning tasks. The body dimensions — 12 mm Width and 12 mm Height — provide a rigid foundation while the 16 mm Cutting Head Width secures the insert effectively. These measured proportions contribute to extended tool life by minimizing deflection under load. The ISO marking SVJBL 1212 simplifies tooling selection and integration into existing setups. Clear Application Focus and User Benefits This clamping solution is intended for machinists and production shops that require dependable toolholding for turning with VBMT 1103 inserts. The holder's geometry supports consistent chip evacuation and stable cutting conditions, translating into fewer rejects and faster setup times. By choosing a holder with defined specification and ISO designation, shops simplify inventory and ensure compatibility across turning tasks without compromising tool performance. Designed for Integration and Easy Identification Marking and dimensions make the holder straightforward to match with Inserts and toolholders in the tool cabinet. The ISO designation SVJBL 1212 and compatibility note for VBMT 1103 inserts reduce setup errors and speed up tool change procedures. Clear specification supports process documentation and quality control, enabling maintenance of machining parameters and traceability in production environments. Strong recommendation: Opt for the Teknik Makina Turning Holder for accurate VBMT 1103 turning — for expert advice and application support contact METAV Werkzeuge at info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Technical Data Bezeichnung: Turning Holder Marke: Teknik Makina SKU: D372TM For Indexable Inserts: VBMT 1103 ISO Designation: SVJBL 1212 Secondary Designation: J11 Total Length: 110 mm Width: 12 mm Height: 12 mm Cutting Head Width: 16 mm Cutting Direction: left Cutting Angle: 93° Weight: 0.141 kg GTIN: 4061905153686 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Which inserts fit the Turning Holder from Teknik Makina? The Turning Holder by Teknik Makina is designed for and compatible with VBMT 1103 indexable inserts, ensuring precise seating and stable clamping for left-hand turning operations. Can the Turning Holder be used for heavy-duty turning? This clamping holder is optimized for medium-duty turning where stability and repeatability are required; for heavy-duty applications, consult Teknik Makina specifications or contact METAV Werkzeuge for tailored recommendations. How does the SVJBL 1212 designation help in choosing the correct holder? The ISO designation SVJBL 1212 on this Turning Holder clarifies size and mounting standards, simplifying identification and ensuring compatibility with matching toolholders and inserts. Who can provide support for setup or technical questions about the Turning Holder? METAV Werkzeuge offers expert advice and support for the Teknik Makina Turning Holder; reach out via info@metav-werkzeuge.com or +49 2822 7131930 for application guidance and technical data. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D372TM","sku":"D372TM","mpn":"D372TM","gtin13":"4061905153686","name":"Turning Holder SVJBL 1212 93° VBMT 1103","description":"110mm SVJB for VBMT 1103 indexable inserts, 93° cutting angle; 12x12 mm shank, 16 mm cutting head width; left-hand cutting - Teknik Makina","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/90/06/35/64/64350690edeb9298707ad02d/d370tm-main.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/2a/7e/de/62/62de7e2a148ec6b71020ff78/d370tm-artikelliste.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/ce/7e/de/62/62de7ecebd24461b3d5f7a57/d370tm-technische-zeichnung.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"For indexable inserts","value":"VBMT 1103"},{"@type":"PropertyValue","name":"Overall length","value":"110 mm"},{"@type":"PropertyValue","name":"Shank width","value":"12 mm"},{"@type":"PropertyValue","name":"Shank height","value":"12 mm"},{"@type":"PropertyValue","name":"Cutting head width","value":"16 mm"},{"@type":"PropertyValue","name":"Cutting angle","value":"93°"},{"@type":"PropertyValue","name":"Cutting direction","value":"left"},{"@type":"PropertyValue","name":"Weight","value":"0.141 kg"},{"@type":"PropertyValue","name":"ISO designation","value":"SVJBL 1212"},{"@type":"PropertyValue","name":"Designation 2","value":"J11"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Which inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"VBMT 1103 indexable inserts fit this holder."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 110 mm."}},{"@type":"Question","name":"What are the shank dimensions?","acceptedAnswer":{"@type":"Answer","text":"Shank measures 12 mm by 12 mm (width x height)."}},{"@type":"Question","name":"What is the cutting angle?","acceptedAnswer":{"@type":"Answer","text":"The cutting angle is 93°."}},{"@type":"Question","name":"Is the cutting direction left or right?","acceptedAnswer":{"@type":"Answer","text":"The cutting direction is left."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Manufacturer is Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/turning-holder-d372tm","dateModified":"2026-03-31T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder Series"},{"@type":"Thing","name":"For VBMT 1103 Indexable Inserts"},{"@type":"Thing","name":"Left-hand Cutting Tools"}],"mentions":[{"@type":"Thing","name":"SVJBL 1212 ISO designation"},{"@type":"Thing","name":"J11 designation 2"},{"@type":"Thing","name":"Teknik Makina manufacturer"}]}]}

Klemmhalter (Turning Holder) by Teknik Makina The Klemmhalter (Turning Holder) is a precision clamping tool for turning operations with VBMT 1103 indexable inserts, designed for right-hand cutting in metalworking applications. For VBMT 1103 indexable inserts Internal coolant supply Overall length 110 mm 93° cutting angle for stable cuts ISO SVJBR 1212 compatibility High stability and reliable chip control for consistent results The Klemmhalter delivers stable clamping and predictable cutting behavior thanks to its 93° cutting angle, which supports secure engagement of the insert and reduces vibration during turning. Designed for use with VBMT 1103 indexable inserts, this holder provides a dependable platform for finishing and semi-finishing operations. By keeping tool deflection low, the result is improved surface finish and repeatable dimensional accuracy even in short overhang setups. Internal coolant for longer tool life and better cooling Equipped with internal coolant supply, the holder channels cutting fluid directly to the cutting edge to improve chip evacuation and cooling. This targeted coolant feed helps to lower cutting temperatures and reduce built-up edge, which can extend the lifetime of the insert and maintain cutting performance over longer cycles. For workshops that prioritise productivity, the direct coolant path supports more consistent process stability and reduces the need for frequent tool changes. Compact dimensions for flexible workshop integration With an overall length of 110 mm and a compact cross-section (12 mm width and 12 mm height), the clamping holder fits tight toolpost arrangements and compact lathes. The 16 mm wide cutting head enables secure seating of the insert while keeping the tool assembly compact. This moderate footprint allows machinists to place tools closer together on multi-station turrets and simplifies setup when space is limited. Practical compatibility and simple assembly for efficient use The holder is specified under ISO SVJBR 1212 and accepts standard VBMT 1103 inserts, making replacement and sourcing straightforward. Right-hand cutting orientation is indicated for correct mounting and process planning. Fast assembly is supported by the included Torx interface (T8) and screw specification (M2.5x6.5), which enable quick insert clamping and maintenance without special adapters. Strong recommendation: Choose Teknik Makina’s Klemmhalter SVJBR 1212 for robust turning applications and contact METAV Werkzeuge for expert technical support and ordering assistance — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Technical Information Bezeichnung: Klemmhalter Marke: Teknik Makina SKU: AP541TM For indexable inserts: VBMT 1103 Overall length: 110 mm Weight: 0.141 kg ISO designation: SVJBR 1212 Secondary designation: J11-IK Width: 12 mm Height: 12 mm Cutting head width: 16 mm Cutting direction: right Cutting angle: 93° Internal coolant: Yes Torx key: T8 Torx screw: M2.5x6.5 GTIN: 4061905052286 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Klemmhalter from Teknik Makina and how are they mounted? The Klemmhalter from Teknik Makina is designed for VBMT 1103 indexable inserts; inserts are clamped into the holder's pocket and secured with the specified screw (M2.5x6.5) using a Torx T8 driver for secure mounting. Does the Klemmhalter support coolant-through operation? Yes, the Teknik Makina Klemmhalter features internal coolant supply to feed cutting fluid directly to the insert edge, improving chip control and tool life during turning operations. Is the Klemmhalter suitable for right- and left-hand cutting? The Klemmhalter is specified for right-hand cutting; for left-hand operations, please consult METAV Werkzeuge to identify an appropriate variant or a compatible holder solution. How does the 93° cutting angle benefit turning with the Teknik Makina holder? A 93° cutting angle provides a stable engagement geometry that reduces vibration and improves surface finish; this makes the Teknik Makina holder a good choice for finishing and semi-finishing passes where dimensional accuracy matters. Who can I contact for technical advice about the Klemmhalter? For expert guidance on whether the Klemmhalter meets your process requirements, contact METAV Werkzeuge: eMail info@metav-werkzeuge.com, Phone +49 2822 7131930, or WhatsApp +49 170 2837271. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#AP541TM","sku":"AP541TM","mpn":"AP541TM","gtin13":"4061905052286","name":"Turning Holder SVJBR 1212 93° VBMT 1103","description":"SVJB clamping holder for VBMT 1103 indexable inserts; 110 mm overall length; internal coolant; 93° cutting angle; right-hand cutting.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/09/8d/e2/62/62e28d0933927e49dbf377e9/ap540tm-main.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"For indexable inserts","value":"VBMT 1103"},{"@type":"PropertyValue","name":"Overall length","value":"110 mm"},{"@type":"PropertyValue","name":"Weight","value":"0.141 kg"},{"@type":"PropertyValue","name":"ISO designation","value":"SVJBR 1212"},{"@type":"PropertyValue","name":"Designation 2","value":"J11-IK"},{"@type":"PropertyValue","name":"Width","value":"12 mm"},{"@type":"PropertyValue","name":"Height","value":"12 mm"},{"@type":"PropertyValue","name":"Cutting head width","value":"16 mm"},{"@type":"PropertyValue","name":"Cutting angle","value":"93°"},{"@type":"PropertyValue","name":"Cutting direction","value":"right"},{"@type":"PropertyValue","name":"Internal coolant","value":"yes"},{"@type":"PropertyValue","name":"Torx key","value":"T8"},{"@type":"PropertyValue","name":"Torx screw","value":"M2.5x6.5"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What inserts does this holder fit?","acceptedAnswer":{"@type":"Answer","text":"Fits VBMT 1103 indexable inserts."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 110 mm."}},{"@type":"Question","name":"Does it support internal coolant?","acceptedAnswer":{"@type":"Answer","text":"Yes, the holder features internal coolant."}},{"@type":"Question","name":"What is the cutting angle?","acceptedAnswer":{"@type":"Answer","text":"The cutting angle is 93°."}},{"@type":"Question","name":"Is the cutting direction right or left?","acceptedAnswer":{"@type":"Answer","text":"The holder is for right-hand cutting."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Manufacturer is Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/turning-holder-svjbr-1212-93-vbmt-1103","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder"},{"@type":"Thing","name":"VBMT 1103 Compatibility"},{"@type":"Thing","name":"Right-Hand Cutting 93°"}],"mentions":[{"@type":"Thing","name":"Internal Coolant"},{"@type":"Thing","name":"SVJBR 1212 ISO Designation"},{"@type":"Thing","name":"J11-IK"}]}]}

Turning Holder (Clamping Holder) — for VBMT 1103 Indexable Inserts by Teknik Makina The Turning Holder is a precision Clamping Holder engineered for secure mounting of VBMT 1103 indexable inserts in left-hand turning operations. For VBMT 1103 Indexable Inserts 110 mm Overall Length 93° Cutting Angle, Left-Hand Direction Compact 10×10 mm Shank with 12 mm Head Engineered for precision and stable cutting forces The Turning Holder from Teknik Makina combines a rigid Clamping design with a defined 93° Cutting Angle to deliver consistent engagement with VBMT 1103 inserts. This precision geometry reduces vibration and flank wear, which leads to improved Surface Quality and Predictable Tool Life. The secure clamp seat ensures repeatable positioning of the insert so setups remain stable across production cycles. Compact dimensions that improve accessibility and setup flexibility With an Overall Length of 110 mm and a Shank of 10×10 mm, this Holder is intended for tight Toolpost arrangements and reduced overhang. The 12 mm Cutting Head Width supports chip formation control while keeping the tool silhouette compact, enabling access to narrow workpiece features. Reduced projection improves rigidity and allows higher feed rates without compromising finish. Standardised interface and versatile application range Marked as SVJBL 1010 (ISO designation), the Holder accepts VBMT 1103 inserts and aligns with industry tooling standards for quick interchangeability. The Left-Hand Cutting Direction makes it suitable for specific turning tasks and fixture layouts. For workshops and small series production, this configuration simplifies inventory management and speeds up tool changeovers while maintaining Process Reliability. Support, quality assurance and who this is for Designed by Teknik Makina for machinists, toolrooms and production shops that demand reproducible results, this Holder targets professionals focused on turning accuracy and uptime. METAV Werkzeuge offers comprehensive advice for selection and integration; expert assistance is available for questions about suitability, clamping torque or mounting orientation to ensure optimal performance in your environment. Trust Teknik Makina’s Turning Holder for demanding turning operations — for personalised advice contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Turning Holder Marka/Manufacturer: Teknik Makina SKU: D370TM For Indexable Inserts: VBMT 1103 Compatible Inserts: VBMT 1103 Overall Length: 110 mm Weight: 0.097 kg ISO Designation: SVJBL 1010 Secondary Designation: J11 Width (Shank): 10 mm Height (Shank): 10 mm Cutting Head Width: 12 mm Cutting Angle: 93° Cutting Direction: Left GTIN: 4061905153679 Condition: new Availability: in Stock Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Is the Turning Holder compatible with VBMT 1103 inserts? Yes, the Turning Holder by Teknik Makina is specifically designed for VBMT 1103 indexable inserts and provides the correct seat geometry for secure clamping and repeatable positioning. What is the Cutting Direction and how does it affect use? The Teknik Makina Turning Holder is configured for Left-Hand cutting, which determines the approach angle and is suitable for operations and fixture setups that require left-handed tool engagement. Can METAV Werkzeuge help with selection and mounting advice? METAV Werkzeuge offers extensive consultation for the Turning Holder and can assist with technical questions, mounting recommendations and compatibility checks; contact info@metav-werkzeuge.com or +49 2822 7131930. What standard designation does the Holder follow? The Holder carries the ISO designation SVJBL 1010, ensuring standardised interface dimensions for straightforward integration into existing tooling systems. 110mm SVJBL 1010 Turning Holder for VBMT 1103 Indexable Inserts, 93° Cutting Angle, Left-Hand - Teknik Makina

Turning Holder by Teknik Makina — Precision Toolholder for Turning Operations The Turning Holder is a robust clamping solution designed for VBMT 1103 indexable inserts, delivering stable support for left-hand turning and demanding metalcutting applications. Turning Holder for VBMT 1103 inserts Internal coolant for improved chip evacuation 110 mm overall length for stable support ISO SVJBL 1212 form for standard toolholders Left-hand cutting direction with 93° cutting angle Improved Process Reliability through Precise Clamping The Turning Holder from Teknik Makina secures VBMT 1103 inserts with high repeatability, reducing vibration and increasing tool life. Its 110 mm overall length contributes to stable support in the toolpost, which helps maintain consistent cutting conditions. The design translates into more predictable surface finish and fewer reworks, making it suitable for series turning where process reliability matters. Built-in Coolant for Cleaner Chips and Longer Insert Life Equipped with Internal Coolant, this holder channels coolant directly to the cutting zone, aiding chip evacuation and heat control. Delivering coolant to the insert flank reduces thermal load on the cutting edge and helps prevent built-up edge formation. As a result, machining can run longer between indexings, improving productive cutting time with minimal operator intervention. Standardised Interface and Clear Compatibility The holder uses the ISO designation SVJBL 1212 and is matched to VBMT 1103 indexable inserts, which simplifies selection and tooling logistics. Indexable inserts are replaceable cutting tips that allow fast tool change without reclamping the entire holder; this holder’s compatibility ensures easy integration into existing holder-insert systems and reduces setup time for workshops transitioning between jobs. Designed for Workshops and Production Environments Technik Makina engineered this toolholder for machinists and production shops that require a dependable left-hand turning solution. The Left-hand orientation and 93° cutting angle are optimised for specific turning tasks where approach geometry matters. Maintenance is straightforward thanks to standard Torx fastening (Torx T8, M2.5x6.5), so service and reassembly stay quick and reliable. Choose Teknik Makina’s proven Turning Holder for precise left-hand turning and contact METAV Werkzeuge for personalised technical advice and workshop support: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Bezeichnung: Turning Holder Brand: Teknik Makina SKU: AP551TM Suitable Indexable Inserts: VBMT 1103 Overall Length: 110 mm Weight: 0.141 kg ISO Designation: SVJBL 1212 Alternative Designation: J11-IK Width: 12 mm Height: 12 mm Cutting Head Width: 16 mm Cutting Direction: Left Cutting Angle: 93° Internal Coolant: Yes Torx Key: T8 Torx Screw: M2.5x6.5 GTIN: 4061905052392 Availability: In stock Condition: New Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina and which insert format is required? The Turning Holder by Teknik Makina is designed for VBMT 1103 indexable inserts; these standard inserts offer a cost-effective replaceable cutting edge and ensure straightforward tooling compatibility with the holder’s ISO SVJBL 1212 interface. Does the Teknik Makina Turning Holder provide coolant to the cutting edge? Yes, the Turning Holder includes Internal Coolant, which supplies coolant directly to the cutting zone to support chip evacuation and thermal control, thereby extending insert life when used with appropriate coolant supply. Which cutting direction and angle does the Turning Holder support? The Teknik Makina Turning Holder is configured for left-hand turning and features a 93° cutting angle, making it suitable for applications that require that approach geometry and for setups where left-handed tool orientation is required. Who can I contact for advice on whether the Turning Holder fits my machine or process? METAV Werkzeuge provides expert consultation for tooling selection; for bespoke guidance on the Turning Holder by Teknik Makina, contact METAV at info@metav-werkzeuge.com, phone +49 2822 7131930, or WhatsApp +49 170 2837271. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#AP551TM","sku":"AP551TM","mpn":"AP551TM","gtin13":"4061905052392","name":"Turning Holder SVJBL 1212 93° VBMT 1103","description":"110mm turning holder for VBMT 1103 indexable inserts, SVJBL 1212, left cutting direction, internal coolant; robust 12x12mm body with 16mm cutting head width.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/09/8d/e2/62/62e28d0933927e49dbf377e8/ap550tm-main.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"Length","value":"110 mm"},{"@type":"PropertyValue","name":"Compatible Inserts","value":"VBMT 1103"},{"@type":"PropertyValue","name":"ISO Designation","value":"SVJBL 1212"},{"@type":"PropertyValue","name":"Body Width","value":"12 mm"},{"@type":"PropertyValue","name":"Body Height","value":"12 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"16 mm"},{"@type":"PropertyValue","name":"Cutting Angle","value":"93°"},{"@type":"PropertyValue","name":"Cutting Direction","value":"left"},{"@type":"PropertyValue","name":"Internal Coolant","value":"yes"},{"@type":"PropertyValue","name":"Weight","value":"0.141 kg"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"Designed for VBMT 1103 indexable inserts."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 110 mm."}},{"@type":"Question","name":"What is the ISO designation?","acceptedAnswer":{"@type":"Answer","text":"ISO designation SVJBL 1212."}},{"@type":"Question","name":"Is internal coolant supported?","acceptedAnswer":{"@type":"Answer","text":"Yes, the holder supports internal coolant."}},{"@type":"Question","name":"Which direction is the cutting?","acceptedAnswer":{"@type":"Answer","text":"Cutting direction is left."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Manufacturer is Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/turning-holder-svjbl-1212-93-vbmt-1103","dateModified":"2026-03-31T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder Series"},{"@type":"Thing","name":"Indexable Insert Tooling"},{"@type":"Thing","name":"Workshop and Lathe Applications"}],"mentions":[{"@type":"Thing","name":"VBMT 1103 Inserts"},{"@type":"Thing","name":"SVJBL 1212 ISO Designation"},{"@type":"Thing","name":"Internal Coolant Feature"}]}]}

Turning Holder SVJBL 1010 — Turning Holder for VBMT 1103 by Teknik Makina Turning Holder SVJBL 1010 is a precision tool holder designed for secure clamping of VBMT 1103 indexable inserts, optimized for left-hand turning operations in metalworking workshops. Compatible with VBMT 1103 indexable inserts Internal coolant supply for improved cooling 110 mm overall length for stable overhang Compact 10 x 10 mm shank for tight toolposts 93° cutting angle for reliable profile control Precision clamping tailored to VBMT 1103 inserts The Turning Holder SVJBL 1010 is engineered to ensure repeatable, secure seating of VBMT 1103 inserts with an ISO designation of SVJBL 1010. Its 10 x 10 mm shank and 12 mm Schneidekopf (cutting head) width provide a compact interface that reduces vibration and improves surface finish. The 93° cutting angle and left-hand cut orientation deliver predictable geometry for external turning profiles, helping to maintain dimensional accuracy on workpieces. Improved cooling and straightforward setup for efficient machining Built-in internal coolant improves tool life and chip control by directing coolant toward the cutting edge, which stabilizes temperatures during interrupted cuts. Assembly and insert changes are simplified with the specified Torx hardware: a T8 key and M2.5x6.5 Torx screw ensure consistent clamping torque and safe fixation. The secondary designation J11-IK can be used to match compatible boring or clamping systems when integrating the holder into existing setups. Robust choice for workshop reliability and frequent use With an overall length of 110 mm and a low mass of approximately 0.097 kg, this holder balances rigidity and handling convenience for machinists. The design supports routine production and job-shop environments where fast indexable insert changes and stable cutting conditions are required. The product is offered in stock and in new condition, making it suitable for replacing worn holders or expanding tooling options for turning centers that rely on VBMT 1103 inserts. Strong recommendation: For shops seeking precise left-hand turning with reliable coolant support, choose the Teknik Makina Turning Holder SVJBL 1010 — for personalised technical advice and application support contact METAV Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Designation: Turning Holder Brand/Manufacturer: Teknik Makina SKU: AP550TM Alternative designation: SVJB for VBMT Indexable Inserts ISO designation: SVJBL 1010 Compatible inserts: VBMT 1103 Secondary part reference: J11-IK Overall length: 110 mm Shank width: 10 mm Shank height: 10 mm Cutting head width: 12 mm Cutting height: 30 mm Cutting angle: 93° Cut direction: left Internal coolant: Yes Torx key: T8 Torx screw: M2.5x6.5 Weight: 0.097 kg GTIN: 4061905052385 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ How do I fit a VBMT 1103 insert into the Turning Holder SVJBL 1010 from Teknik Makina? To install a VBMT 1103 insert in the Turning Holder SVJBL 1010 by Teknik Makina, position the insert on the seat, secure it with the specified M2.5x6.5 Torx screw and tighten using a T8 Torx key to the recommended torque for stable clamping. Does the Turning Holder SVJBL 1010 support internal coolant? Yes, the Turning Holder SVJBL 1010 from Teknik Makina features internal coolant, allowing directed coolant flow to the cutting edge, which helps extend insert life and improve chip evacuation during machining. Which cutting direction and applications suit the Teknik Makina Turning Holder SVJBL 1010? The Teknik Makina Turning Holder SVJBL 1010 is configured for left-hand cutting with a 93° cutting angle, making it suitable for external turning operations and profile work where left-handed tool orientation is required. Who can provide technical advice if I am unsure this holder fits my machine? For application-specific guidance, METAV Werkzeuge offers competent consultation; contact METAV Werkzeuge for assistance with the Turning Holder SVJBL 1010 by Teknik Makina at info@metav-werkzeuge.com or call +49 2822 7131930. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#AP550TM","sku":"AP550TM","mpn":"AP550TM","gtin13":"4061905052385","name":"Turning Holder SVJBL 1010 93° VBMT 1103","description":"110mm turning holder for VBMT 1103 indexable inserts with 93° cutting angle and internal coolant; robust SVJB design by Teknik Makina.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/09/8d/e2/62/62e28d0933927e49dbf377e8/ap550tm-main.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"Length","value":"110 mm"},{"@type":"PropertyValue","name":"Compatible Inserts","value":"VBMT 1103"},{"@type":"PropertyValue","name":"ISO Designation","value":"SVJBL 1010"},{"@type":"PropertyValue","name":"Cutting Angle","value":"93°"},{"@type":"PropertyValue","name":"Internal Coolant","value":"yes"},{"@type":"PropertyValue","name":"Width","value":"10 mm"},{"@type":"PropertyValue","name":"Height","value":"10 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"12 mm"},{"@type":"PropertyValue","name":"Weight","value":"0.097 kg"},{"@type":"PropertyValue","name":"Screw","value":"M2,5x6,5"},{"@type":"PropertyValue","name":"Torx Key","value":"T8"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"Compatible with VBMT 1103 indexable inserts."}},{"@type":"Question","name":"What is the total length?","acceptedAnswer":{"@type":"Answer","text":"Total length is 110 mm."}},{"@type":"Question","name":"Does the holder have internal coolant?","acceptedAnswer":{"@type":"Answer","text":"Yes, the holder features internal coolant."}},{"@type":"Question","name":"What is the cutting angle?","acceptedAnswer":{"@type":"Answer","text":"Cutting angle is 93°."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Manufacturer is Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/turning-holder-svjbl-1010-93-vbmt-1103","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder SVJBL 1010"},{"@type":"Thing","name":"VBMT 1103 Compatibility"},{"@type":"Thing","name":"Internal Coolant Feature"}],"mentions":[{"@type":"Thing","name":"Torx T8 Key"},{"@type":"Thing","name":"M2,5x6,5 Screw"},{"@type":"Thing","name":"J11-IK Adapter"}]}]}

Turning Holder (Klemmhalter) — Teknik Makina Turning Holder (SVJB for VBMT Indexable Inserts) is a precision clamping tool designed to secure VBMT 1103 indexable inserts for stable left-hand turning operations in metalworking and CNC environments. Precision fit for VBMT 1103 inserts Overall length 110 mm for stable setup SVJBL 1212 ISO designation for compatibility Left-hand 93° cutting angle for defined chip flow Compact 12 x 12 mm shank for narrow toolholders Robust design for precise clamping and repeatability The clamping concept ensures a consistent seat for indexable cutting edges, reducing runout and vibration during turning. The holder is manufactured to tight tolerances so that the SVJBL 1212 designation matches common toolholder standards and guarantees interchangeability with VBMT 1103 inserts. Users benefit from improved surface finish and extended Insert Life thanks to the steady clamp force and rigid overall length of 110 mm, which supports a stable overhang during machining. Optimised geometry for controlled left-hand machining A clearly defined cutting geometry supports predictable chip formation and tool engagement. The Turning Holder is configured for left cutting direction and features a 93° cutting angle, which helps direct chips away from the workpiece and toolpost while maintaining a favourable cutting edge contact. For operators, this translates into fewer rework cycles and smoother machining on cast, forged or turned components where controlled material removal is essential. Tailored for workshops and precision engineering shops This holder is aimed at machine shops, toolrooms and production environments that require reliable, repeatable tooling solutions. The compact profile and standardised ISO identification make the tool straightforward to integrate into existing toolsets, while the rigid shank design supports shorter cycle times and consistent part tolerances. Technicians and programmers benefit from predictable tool behaviour, reducing setup time and enabling consistent productivity across batches. Compatibility, dimensions and simple installation Installation is intuitive: the holder accepts VBMT 1103 inserts and aligns via standard datum faces, making replacement quick during tool changes. Key dimensions such as the 12 mm width and 12 mm height of the shank and the 12 mm cutting-head width ensure compatibility with narrow toolposts and fixtures. Where required, adjusting seating and clamp torque helps achieve optimal contact and repeatable positioning without complex recalibration. Choose Teknik Makina’s precision Turning Holder with SVJBL 1212 compatibility for dependable machining performance — METAV Werkzeuge provides expert consultation and technical support at info@metav-werkzeuge.com or +49 2822 7131930 Bezeichnung: Klemmhalter Marke: Teknik Makina SKU: D396TM Für Wendeplatten: VBMT 1103 Passende Wendeplatten: VBMT 1103 Gesamtlänge: 110 mm Gewicht: 0,132 kg ISO Bezeichnung: SVJBL 1212 Bezeichnung 2: J11-F Breite: 12 mm Höhe: 12 mm Schneidekopf Breite: 12 mm Schnittwinkel: 93° Schnittrichtung: left Hersteller oder Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Verantwortliche Person oder Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts does the Turning Holder by Teknik Makina accept? The Turning Holder (Klemmhalter) from Teknik Makina is designed for VBMT 1103 indexable inserts, providing a precise fit and standardised seating for efficient turning operations. Is the Teknik Makina Turning Holder suitable for left-hand turning only? Yes, the Turning Holder by Teknik Makina is configured for left-hand cutting direction with a defined 93° cutting angle to optimise chip flow and tool engagement in left-hand turning applications. How do I get technical support for the Turning Holder (Klemmhalter)? For expert advice on the Turning Holder (Klemmhalter) from Teknik Makina, METAV Werkzeuge offers comprehensive consultation — contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised assistance. What are the key dimensions to check before purchase of the Teknik Makina Turning Holder? Check the overall length of 110 mm and the shank dimensions of 12 mm x 12 mm to ensure the Turning Holder (Klemmhalter) from Teknik Makina fits your toolpost and tooling setup. 93° SVJBL 1212 Turning Holder for VBMT 1103 Indexable Inserts, 110mm Length - Teknik Makina