Turning Tools

Klemmhalter (Turning Holder) by Teknik Makina The Klemmhalter (Turning Holder) is a precision clamping tool designed for VBMT 1103 indexable inserts, optimised for secure right-hand turning operations. Compatible with VBMT 1103 inserts 110 mm Overall Length for stable reach Secure clamping with SVJBR 1212 design 93° Cutting Angle for precise tool geometry Right-hand cut for standard turning tasks Precision fit and predictable results for demanding turning Designed to accept VBMT 1103 indexable inserts, this turning holder ensures a consistent seating and repeatable tool position, which reduces setup time and increases machining reliability. The holder’s SVJBR 1212 ISO design provides a defined clamping interface that limits insert play and improves surface finish. Users benefit from less rework and more predictable cycle times when the toolholder and insert system match precisely. Stable reach and improved access in confined setups With an overall length of 110 mm, the holder offers the necessary reach while maintaining rigidity for many standard lathe configurations. This balance between length and stiffness helps avoid chatter and dimensional deviation during turning operations. For applications where access is limited, the holder’s compact geometry simplifies tool layout without compromising cutting stability, delivering a dependable solution for medium-reach turning tasks. Optimised geometry for accurate cutting behaviour The holder’s 93° cutting angle and dedicated right-hand orientation translate into controlled chip flow and defined cutting forces, supporting consistent tool life and surface quality. By aligning insert geometry and holder angle, the system reduces unexpected deflection and enables more precise depth-of-cut control. This technical alignment is particularly beneficial for repeat production runs where part tolerance consistency is critical. Quick identification and straightforward installation Marked with the ISO designation SVJBR 1212 and compatible marking J11-F, the holder simplifies tool selection and inventory management. Its 12 mm width and 12 mm height dimensions for the shank and cutting head make it easy to match with standard turret pockets. Clear technical identification speeds up tool changeovers and helps technicians avoid mismatched assemblies, reducing downtime on the machine. Who will benefit from this toolholder Manufacturers and job shops that require reliable, repeatable turning operations will find this holder well suited to their setups. The combination of proven ISO interface, defined cutting angle and right-hand orientation makes it a practical choice for parts with medium turning depths and moderate finishing requirements. For technicians seeking a straightforward, robust toolholder solution, this component supports efficient workshop workflows. Choose the Teknik Makina Turning Holder for dependable VBMT 1103 performance — for expert advice and application support contact METAV Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical Information Bezeichnung: Klemmhalter Marke: Teknik Makina SKU: D129TM GTIN: 4061905153792 Compatible Inserts: VBMT 1103 Overall Length: 110 mm ISO Designation: SVJBR 1212 Alternate Designation: J11-F Width: 12 mm Height: 12 mm Cutting Head Width: 12 mm Cutting Angle: 93° Cutting Direction: right Weight: 0.132 kg Availability: in Stock Condition: new Label: Klemmhalter SVJBR 1212 93° VBMT 1103 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Klemmhalter by Teknik Makina Turning Holder? The Klemmhalter by Teknik Makina is designed for VBMT 1103 indexable inserts, ensuring proper seating and compatibility with the SVJBR 1212 interface for stable turning. Can this Turning Holder be used for left-hand cutting? This Turning Holder from Teknik Makina is configured for right-hand cutting only; for left-hand operations a different holder with the appropriate orientation should be selected. How does the 93° cutting angle affect performance of the Klemmhalter? The 93° cutting angle on the Klemmhalter provides defined cutting geometry that supports consistent chip flow and predictable cutting forces, improving surface finish and repeatability. Where can I get technical support for the Technik Makina Klemmhalter? For technical advice on the Teknik Makina Klemmhalter, METAV Werkzeuge offers competent consultation — contact info@metav-werkzeuge.com or call +49 2822 7131930 for assistance. 110mm Turning Holder SVJB for VBMT 1103, SVJBR 1212, 93° Cutting Angle - Teknik Makina

Turning Holder (SVJB for VBMT Indexable Inserts) by Teknik Makina Turning Holder (SVJB for VBMT Indexable Inserts) is a compact, flat clamping solution engineered for precision turning with VBMT 1103 indexable inserts, optimized for right-hand cutting in confined setups. Turning Holder for VBMT 1103 indexable inserts Internal Coolant for improved tool life and cooling Compact 110 mm Overall Length for tight setups ISO SVJBR 1212 clamping for secure insert seating Right-hand cutting with 93° cutting angle specification Precision Clamping for Consistent Results A robust clamping concept ensures that machining remains reliable even under varying cutting conditions. The holder accepts VBMT 1103 indexable inserts and secures them with an ISO SVJBR 1212 clamping, which provides repeatable seating and reduced vibration. This improves surface finish and extends Insert life, so operators benefit from fewer tool changes and more predictable cycle times. For shops focused on small-series turning and finishing operations, this holder offers stability and repeatability. Compact Dimensions that Fit Tight Setups Measured at an Overall Length of 110 mm with a body Width and Height of 12 mm, the design is tailored for applications where space is limited. The Cutting Edge Height of 32 mm and the 93° Cutting Angle deliver controlled engagement and predictable chip flow. These dimensions allow easy integration into existing tool posts and fixtures, simplifying setup and reducing the need for additional adapters. Users gain reliability and space efficiency without sacrificing rigidity. Built for Serviceability and Efficient Cooling Maintenance and assembly are straightforward thanks to the specified Torx drive and hardware. The clamping screw specification M2.5x6.5 and the Torx key T8 ensure quick insert changes with common tools, while the compatible drill bar reference J11‑F‑IK aids in selecting the correct mounting accessories. Integrated Internal Coolant channels support direct coolant delivery to the cutting zone, improving cooling and chip evacuation; this helps to lower cutting temperatures and maintain tool life for demanding Turning operations. Suited for Professional Workshops and Precision Turning Designed by Teknik Makina for machinists who prioritise accuracy, the holder excels in finishing and light to medium roughing tasks where controlled chip formation and tool stability matter. The flat SVJB style is particularly useful for setups requiring low-profile tools. Operators and toolmakers will value the combination of compact form, coolant capability and standardised clamping for faster changeovers and consistent part quality. Choose Teknik Makina’s Turning Holder for dependable clamping and efficient coolant support — for personalised technical advice or to confirm fitment, contact METAV Werkzeuge: info@metav-werkzeuge.com · Tel +49 2822 7131930 · WhatsApp +49 170 2837271 Designation: Turning Holder (Klemmhalter) Brand / Manufacturer: Teknik Makina SKU: AP548TM Variant Description: SVJB for VBMT Indexable Inserts, flat design (SVJB für VBMT Wendeplatten, flache Ausführung) Compatible Inserts: VBMT 1103 Overall Length: 110 mm Overall Height: 12 mm Body Width: 12 mm Cutting Head Width: 12 mm Cutting Edge Height: 32 mm Cutting Direction: right Cutting Angle: 93° Clamping Designation (ISO): SVJBR 1212 Mounting Drill Bar Reference: J11-F-IK Internal Coolant: Yes Torx Key: T8 Torx Screw: M2.5x6.5 Weight: 0.11 kg Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina and which insert size is recommended? The Turning Holder from Teknik Makina is designed for VBMT 1103 indexable inserts; using the specified VBMT 1103 insert size ensures correct seating and optimal performance with the holder’s ISO SVJBR 1212 clamping. Does the Turning Holder support internal coolant and how does that help? Yes, the Teknik Makina Turning Holder features Internal Coolant, which delivers coolant directly to the cutting zone to reduce temperature, improve chip evacuation and prolong Insert life during continuous turning operations. Which tools are needed to change inserts on the Turning Holder? Insert changes on the Turning Holder are carried out with a T8 Torx key and the specified M2.5x6.5 Torx screw; these common tools make maintenance quick and help minimise downtime. Is the Turning Holder suitable for right-hand and left-hand machining? The supplied Turning Holder is specified for right-hand cutting; for left-hand operations, please consult METAV Werkzeuge to identify the correct variant or alternative compatible tooling. 110mm SVJB for VBMT Indexable Inserts, Flat, Internal Coolant - Teknik Makina

Turning Holder — Clamping Holder for VBMT 1103 Indexable Inserts by Teknik Makina The Turning Holder is a compact, precision clamping solution for VBMT 1103 indexable inserts, designed for reliable right‑hand turning operations in constrained tool setups. Compatible with VBMT 1103 indexable inserts 110 mm overall length for extended reach 93° cutting angle for controlled engagement Right‑hand cutting direction for standard turning ISO SVJBR 1010 designation for system compatibility Robust Design for Consistent Clamping and Machining Accuracy Built to provide secure insert retention, this clamping toolholder combines a compact cross‑section with a stable Schneidkopf to minimise vibration and ensure repeatable results. The Turning Holder features a 110 mm overall length and a compact profile that supports rigid setup in small toolholders, delivering consistent contact between tool and workpiece while reducing chatter for improved surface quality. Precise Geometry Enhances Cutting Control and Tool Life The holder's 93° Cutting Angle and right‑hand orientation optimise chip formation and entry conditions, which helps to stabilise cutting forces and protect the Insert edge. For operators, this means predictable tool engagement and a reduced need for frequent adjustments; the geometry supports moderate to aggressive turning strategies while promoting longer insert life through balanced load distribution. System Compatibility and Installation Ease Designed for VBMT 1103 indexable inserts and identified as ISO SVJBR 1010, the toolholder aligns with common clamping systems and fits holders with J11‑F shank designations. The narrow 10 mm cross dimensions of the holder head enable installation in compact turret pockets and allow access to tight work areas, making setup straightforward and repeatable for workshop technicians and production environments. Who Benefits and Where to Use It Engineered for precision shops and production turning centres, this clamping solution suits machinists who require dependable insert retention in confined tool positions. The combination of compact dimensions, standard ISO designation and robust design makes the product a practical choice for finishing and semi‑roughing operations where setup stability and insert repeatability are priorities. For application recommendations and optimisation tips, METAV Werkzeuge offers expert consultation. Choose Teknik Makina’s Turning Holder for dependable, accurate turning — for personalised application advice and order support contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271). Technical Specifications Designation: Klemmhalter (Turning Holder) Brand: Teknik Makina SKU: D128TM Compatible Inserts: VBMT 1103 Overall Length: 110 mm Weight: 0.098 kg ISO Designation: SVJBR 1010 Secondary Designation: J11-F Width: 10 mm Height: 10 mm Schneidkopf Width: 10 mm Schneidehöhe: 22 mm Cutting Direction: right Cutting Angle: 93° GTIN: 4061905153785 Availability: in Stock Condition: new ECLASS: 21181004 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Can the Turning Holder by Teknik Makina accept VBMT 1103 inserts? Yes, the Turning Holder from Teknik Makina is specifically compatible with VBMT 1103 indexable inserts and is designed to secure them reliably in right‑hand turning applications. What does the ISO SVJBR 1010 designation mean for the Teknik Makina Turning Holder? The ISO SVJBR 1010 designation indicates the holder geometry and mounting interface standard, ensuring the Teknik Makina Turning Holder matches holders and toolposts built to the same specification for straightforward integration. Is the Teknik Makina Turning Holder suitable for tight turret pockets? The compact head dimensions (10 mm width/height) make the Turning Holder appropriate for constrained tool positions; Teknik Makina designed this holder to provide reach without sacrificing clamping stability. Where can I get support if I am unsure whether the Turning Holder meets my machining requirements? If you need help assessing whether the Teknik Makina Turning Holder fits your application, METAV Werkzeuge provides detailed advice — contact them at info@metav-werkzeuge.com or +49 2822 7131930 for personalised technical support. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D128TM","sku":"D128TM","mpn":"D128TM","gtin13":"4061905153785","name":"Klemmhalter SVJBR 1010 93° VBMT 1103","description":"Turning holder SVJB for VBMT 1103 indexable inserts, 110 mm overall length, 93° cutting angle, right-hand; robust 10×10 mm clamping interface by Teknik Makina.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/be/4a/21/64/64214abeeb4c191311cc7451/d128tm-main.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/cd/7e/de/62/62de7ecd148ec6b71020ffac/d128tm-technische-zeichnung.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/29/7e/de/62/62de7e2933927e49dbf3272b/d128tm-artikelliste.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"Suitable Inserts","value":"VBMT 1103"},{"@type":"PropertyValue","name":"Overall Length","value":"110 mm"},{"@type":"PropertyValue","name":"Weight","value":"0.098 kg"},{"@type":"PropertyValue","name":"ISO Designation","value":"SVJBR 1010"},{"@type":"PropertyValue","name":"Shank Designation","value":"J11-F"},{"@type":"PropertyValue","name":"Width","value":"10 mm"},{"@type":"PropertyValue","name":"Height","value":"10 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"10 mm"},{"@type":"PropertyValue","name":"Cutting Angle","value":"93°"},{"@type":"PropertyValue","name":"Cutting Direction","value":"right"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Which inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"VBMT 1103 indexable inserts fit this holder."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 110 mm."}},{"@type":"Question","name":"What is the cutting angle?","acceptedAnswer":{"@type":"Answer","text":"Cutting angle is 93°."}},{"@type":"Question","name":"Is the holder right- or left-hand?","acceptedAnswer":{"@type":"Answer","text":"The holder is right-hand."}},{"@type":"Question","name":"What is the ISO designation?","acceptedAnswer":{"@type":"Answer","text":"ISO designation SVJBR 1010."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Manufacturer is Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/d128tm","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder SVJB Series"},{"@type":"Thing","name":"Indexable Inserts VBMT 1103 Compatibility"},{"@type":"Thing","name":"Right-Hand Cutting Applications"}],"mentions":[{"@type":"Thing","name":"J11-F Shank"},{"@type":"Thing","name":"SVJBR 1010 ISO Designation"},{"@type":"Thing","name":"110 mm Overall Length"},{"@type":"Thing","name":"93° Cutting Angle"}]}]}

Turning Holder (Klemmhalter) from Teknik Makina The Turning Holder (Klemmhalter) is a robust clamping solution for VCMT 1103 indexable inserts, designed for accurate, repeatable turning operations in industrial and workshop environments. Compatible with VCMT 1103 indexable inserts Total Length 110 mm for stable overhang ISO designation SVJCR 1010 for standard tooling systems Cut Head Width 12 mm for reliable insert support Right-hand cutting direction with 93° cutting angle Precision clamping for consistent Turning results The Turning Holder delivers stable clamping for VCMT 1103 inserts, minimising tool movement and vibration during cuts. Because the holder is built to the SVJCR 1010 ISO specification, it integrates smoothly into common toolposts and turret systems, ensuring predictable geometry and repeatable part quality. This rigidity translates directly into improved surface finish and longer Insert life. Geometry engineered for predictable chip flow and access With a 93° cutting angle and a right-hand cutting orientation, the holder supports cutting strategies that prioritise clearance and chip evacuation. The 12 mm Cut Head Width provides secure support for the insert corner, reducing the risk of chipping under moderate cutting loads. These design choices benefit machinists who need consistent performance when working on medium-duty turning applications. Built for workshops and production environments Designed for practicality, this Turning Holder suits both small job shops and larger production lines that use VCMT 1103 indexable inserts. Quick mounting and standard ISO compatibility mean setup time is reduced, so machines spend more time cutting and less time in adjustment. Technicians and maintenance staff will appreciate the straightforward interface with common toolholders and inserts. Manufacturer quality and compatibility details Teknik Makina manufactures the holder to provide dependable everyday performance; the component dimensions—10 mm width and 10 mm height for the tool shank—ensure a compact but rigid profile suitable for constrained setups. The holder’s 110 mm total length balances reach and stiffness, helping to minimise deflection where space or part geometry demands some overhang. For reliable, industry-grade clamping choose Teknik Makina’s Turning Holder for VCMT 1103 inserts — for technical advice and personalised recommendations contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. Designation: Klemmhalter (Turning Holder) Brand: Teknik Makina SKU: D239TM For indexable inserts: VCMT 1103 Total length: 110 mm ISO designation: SVJCR 1010 Secondary designation: J11 Width: 10 mm Height: 10 mm Cut Head Width: 12 mm Cutting direction: right Cutting angle: 93° GTIN: 4061905153846 Manufacturer / Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person / Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts are compatible with the Turning Holder from Teknik Makina? The Turning Holder from Teknik Makina is compatible with VCMT 1103 indexable inserts; the holder’s design and SVJCR 1010 ISO designation ensure correct seating and reliable performance with these inserts. Can the Teknik Makina Turning Holder be used for fine finishing operations? Yes, the Teknik Makina Turning Holder supports fine finishing when paired with appropriate VCMT 1103 grades and cutting parameters, thanks to its stable clamping and a 93° cutting angle that promote consistent surface quality. How do I get support or confirm suitability for my machine with the Turning Holder (Klemmhalter)? If you are unsure whether the Turning Holder (Klemmhalter) from Teknik Makina meets your requirements, METAV Werkzeuge provides expert consultation and can supply supplementary technical data; contact them at info@metav-werkzeuge.com or by phone at +49 2822 7131930, WhatsApp +49 170 2837271. 110mm SVJC for VCMT 1103 Indexable Inserts, 93° Cutting Angle - Teknik Makina

Klemmhalter (Turning Holder) — SVJC for VCMT Indexable Inserts by Teknik Makina The Klemmhalter (Turning Holder) secures VCMT 1103 indexable inserts for precise right-hand turning operations on lathes and turning centers. Designed for VCMT 1103 indexable inserts ISO SVJCR 1212 shank for standardized mounting 110 mm overall length for stable overhang 93° cutting angle for controlled chip flow Right-hand orientation for conventional turning Robust Design for Consistent Clamping and Stability Crafted to provide a reliable clamping solution, this toolholder offers a sturdy construction that reduces vibration and runout during machining. The holder’s 110 mm overall length balances accessibility and rigidity, enabling longer reach without sacrificing stability. Thanks to the SVJCR 1212 ISO designation, the clamping interface matches common turret and toolpost systems, so set-up time is minimized and repeatability is improved. Users benefit from fewer interruptions and more consistent part quality. Precision Fit for VCMT 1103 Inserts The clamping geometry is adapted specifically for VCMT 1103 indexable inserts, ensuring secure seating and accurate cutting edge positioning. With a 93° cutting angle and a right-hand cutting direction, the holder supports controlled chip formation and predictable tool engagement. For operators, this means improved surface finish and dimensional adherence with each pass. If unfamiliar, an indexable insert is a replaceable cutting tip that keeps toolholding costs low while maintaining high machining performance. Practical Application and Compatibility This holder is particularly suitable for turning tasks where a standardized shank and predictable tool behavior are required. It accepts inserts identified as VCMT 1103 and mates to fixtures compatible with the SVJCR 1212 form factor. Because of its dimensions and cut geometry, the unit is well-suited for a variety of steels and general turning operations where right-hand cutting is applied. The clear nominal parameters simplify tool selection and help technicians plan setups efficiently. Who Benefits and How to Use It Workshops, small-series manufacturers, and maintenance departments will find this holder useful when reproducible turning results are essential. Operators should verify turret or toolpost compatibility with the SVJCR 1212 designation before installation. Regular inspection of clamp seating and insert torque will prolong service life and maintain machining accuracy. For questions about optimal insert grades or application-specific advice, professional consultation is available. For precision turning on standard turrets, choose the Teknik Makina Klemmhalter (Turning Holder); METAV Werkzeuge provides expert advice and support — contact info@metav-werkzeuge.com or call +49 2822 7131930 for assistance. Bezeichnung: Klemmhalter Brand: Teknik Makina SKU: D240TM For Indexable Inserts: VCMT 1103 Compatible Inserts: VCMT 1103 Overall Length: 110 mm Weight: 0.135 kg ISO Designation: SVJCR 1212 Secondary Designation: J11 Width: 12 mm Height: 12 mm Cutting Head Width: 16 mm Cutting Direction: Right Cutting Angle: 93° GTIN: 4061905153853 Condition: New Availability: In Stock Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Klemmhalter (Turning Holder) from Teknik Makina? The Klemmhalter (Turning Holder) by Teknik Makina is designed to accept VCMT 1103 indexable inserts, providing a secure seat and correct cutting edge position for those specific insert types. Is the Klemmhalter suitable for left-hand turning? The Teknik Makina Klemmhalter (Turning Holder) is specified for right-hand cutting; it is intended for conventional right-hand turning operations rather than left-hand applications. Which ISO designation corresponds to this holder and why does it matter? The holder carries the SVJCR 1212 ISO designation, which denotes the shank and mounting form; matching this designation ensures compatibility with standard turrets and toolposts. Who can I contact at METAV Werkzeuge for technical questions about the Klemmhalter? For application guidance or additional technical data about the Klemmhalter (Turning Holder) from Teknik Makina, contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930, or reach out via WhatsApp at +49 170 2837271. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D240TM","sku":"D240TM","mpn":"D240TM","gtin13":"4061905153853","name":"Turning Holder SVJCR 1212 93° VCMT 1103","description":"SVJC for VCMT indexable inserts; 110 mm overall length; ISO SVJCR 1212; for VCMT 1103 inserts; right-hand, 93° cutting angle; width 12 mm, height 12 mm; manufacturer: Teknik Makina.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/e2/08/35/64/643508e279db570c35c6c770/d239tm-main.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/cd/7e/de/62/62de7ecd0f56dbb4de4dbf3b/d239tm-technische-zeichnung.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/29/7e/de/62/62de7e29bd24461b3d5f7a13/d239tm-artikelliste.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"For Indexable Inserts","value":"VCMT 1103"},{"@type":"PropertyValue","name":"Overall Length","value":"110 mm"},{"@type":"PropertyValue","name":"Weight","value":"0.135 kg"},{"@type":"PropertyValue","name":"ISO Designation","value":"SVJCR 1212"},{"@type":"PropertyValue","name":"Shank Designation","value":"J11"},{"@type":"PropertyValue","name":"Width","value":"12 mm"},{"@type":"PropertyValue","name":"Height","value":"12 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"16 mm"},{"@type":"PropertyValue","name":"Cutting Angle","value":"93°"},{"@type":"PropertyValue","name":"Cutting Direction","value":"right"},{"@type":"PropertyValue","name":"Manufacturer","value":"Teknik Makina"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Which inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"VCMT 1103 indexable inserts fit this holder."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"The overall length is 110 mm."}},{"@type":"Question","name":"What is the ISO designation?","acceptedAnswer":{"@type":"Answer","text":"ISO designation SVJCR 1212."}},{"@type":"Question","name":"What is the cutting angle?","acceptedAnswer":{"@type":"Answer","text":"The cutting angle is 93°."}},{"@type":"Question","name":"Is this right- or left-hand?","acceptedAnswer":{"@type":"Answer","text":"This holder is right-hand."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Manufacturer: Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder Series"},{"@type":"Thing","name":"Allround Turning Applications"},{"@type":"Thing","name":"Workshop and Production Use"}],"mentions":[{"@type":"Thing","name":"VCMT 1103 Inserts"},{"@type":"Thing","name":"ISO SVJCR 1212"},{"@type":"Thing","name":"Shank J11"}]}]}

Turning Holder SVJC for VCMT Indexable Inserts by Teknik Makina Turning Holder SVJC for VCMT indexable inserts offers secure clamping and compact geometry for precision turning in workshop and production environments. Turning Holder SVJC for VCMT indexable inserts Internal coolant for improved chip evacuation Right-hand cutting with 93° cutting angle Compact design: 110 mm overall length Fits VCMT 1103 inserts with secure clamping system Precision Clamping for Consistent Results A rigid clamping concept reduces vibration and ensures repeatable results on each workpiece. The tool's design focuses on a secure clamping mechanism that keeps VCMT-style inserts firmly positioned, which translates into improved surface finish and extended Insert life. This stability benefits shops that prioritise dimensional accuracy and repeatability during serial turning tasks. Better Chip Control and Tool Life Equipped with internal coolant, the holder directs cutting fluid directly to the cutting edge to support efficient chip evacuation and cooling. Improved cooling lowers thermal stress on the Insert and workpiece, helping to maintain cutting performance over longer cycles. Workshops processing steel and mixed materials will notice reduced built-up edge formation and fewer interruptions for manual cleaning. Compact Geometry for Accessible Turning The compact 110 mm overall length and the reduced head profile enable machining in restricted spaces and closer approach to shoulders. Combined with a 93° cutting angle and right-hand cutting direction, this configuration provides good access and stable cutting for common turning operations. The compact format also simplifies tool setup and reduces the chance of interference on complex parts. Designed for Professional Workshops and Production This holder is tailored for professional users who demand reliability and predictable performance. The ISO designation SVJCR 1212 and compatibility with VCMT 1103 inserts reflect a focus on standardized interfaces that simplify tool inventory and replacement. Fast maintenance is supported by the Torx interface (T8) and the specified M2.5x6.5 Torx screw, allowing quick Insert changes with common workshop tools. Choose Teknik Makina’s SVJC holder for robust, production-ready turning — and contact METAV Werkzeuge for tailored technical advice and support: eMail info@metav-werkzeuge.com | Phone +49 2822 7131930 | WhatsApp +49 170 2837271 Bezeichnung: Turning Holder Brand: Teknik Makina SKU: AP519TM Product Type: Variant Compatibility: VCMT 1103 indexable inserts ISO Designation: SVJCR 1212 Overall Length: 110 mm Overall Height: 12 mm Body Width: 12 mm Cutting Head Width: 16 mm Cutting Height: 32 mm Cutting Direction: right Cutting Angle: 93° Internal Coolant: Yes Torx Key: T8 Torx Screw: M2.5x6.5 Categories: Zerspanen › Klemmhalter Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts does the Turning Holder from Teknik Makina accept? The Turning Holder by Teknik Makina is compatible with VCMT 1103 indexable inserts and is designed to secure them reliably for standard turning operations. Does this Turning Holder support internal coolant? Yes, the Turning Holder by Teknik Makina features internal coolant to improve chip evacuation and reduce thermal load at the cutting edge. Is the Turning Holder suitable for tight machining spaces? The Turning Holder's compact 110 mm overall length and reduced head profile make it suitable for machining in restricted areas while maintaining stability during cutting. Which fasteners are required for insert clamping and service? The Turning Holder uses an M2.5x6.5 Torx screw, serviceable with a T8 Torx key, enabling quick Insert changes and straightforward maintenance. Who can provide technical advice for selecting the right holder? For personalised guidance on the Turning Holder from Teknik Makina, METAV Werkzeuge offers expert consultation — contact via eMail info@metav-werkzeuge.com, phone +49 2822 7131930, or WhatsApp +49 170 2837271. 110mm SVJC Turning Holder for VCMT Indexable Inserts, internal coolant, right-hand, 12mm width - Teknik Makina

Turning Holder SVJC for VCMT Indexable Inserts by Teknik Makina The Turning Holder SVJC for VCMT Indexable Inserts is a precision clamping solution for left-hand turning operations with internal coolant, optimised for VCMT 1103 indexable inserts. Compact design SVJCL 1212 for secure mounting Compatible with VCMT 1103 indexable inserts Internal coolant for improved tool life Left-hand cutting orientation for specialised turning Robust clamp with Torx T8 fastening Consistent clamping for repeatable turning results The Turning Holder delivers Precision Clamping through a compact SVJCL 1212 design that secures VCMT-style inserts reliably. A firm clamp interface minimises axial and radial play, which reduces vibration and supports consistent surface finish on turned components. This stability is particularly advantageous when machining small diameters or performing finishing passes where dimensional accuracy matters. Optimised for VCMT 1103 inserts and left-hand applications Compatibility with VCMT 1103 indexable inserts ensures straightforward insert replacement and consistent cutting geometry. The holder’s left-hand cutting orientation makes it suitable for operations that require a mirrored tool path or specific machine setups. Users benefit from predictable chip flow and repeatable cutting angles thanks to the defined 93° cutting angle. Internal coolant improves tool life and process reliability Equipped with Internal Coolant, the holder channels cutting fluid directly to the cutting edge, helping to reduce heat buildup and flush chips away from the cutting zone. This targeted cooling supports longer insert life and steadier cutting conditions, which translates into fewer tool changes and increased uptime for production runs. Simple installation and maintenance for workshop efficiency The clamping system is designed for quick mounting and service: the holder uses a Torx T8 key and an M2.5×6.5 screw for secure fixation, enabling fast insert changes and straightforward maintenance. The compact dimensions (Overall Length 110 mm, Overall Height 12 mm, Holder Width 12 mm, Head Width 16 mm) make the tool easy to position in tight setups while maintaining robust engagement. Who benefits from this holder This tool is aimed at machinists and production shops that require reliable, repeatable turning with VCMT inserts—especially in setups that demand left-hand cutting or internal coolant delivery. The holder supports applications from precision finishing to light-medium turning tasks where tool life and consistency are priorities. Choose Teknik Makina’s robust Turning Holder to enhance machining stability — for personalised technical advice and to confirm fitment contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271) Turning Holder SVJC for VCMT Indexable Inserts Brand: Teknik Makina SKU: AP529TM Alternative designation: SVJCL 1212 Compatible inserts: VCMT 1103 Overall length: 110 mm Overall height: 12 mm Holder width: 12 mm Head (cutting) width: 16 mm Cutting height: 32 mm Cutting direction: left Cutting angle: 93° Tool shank designation: J11-IK Internal coolant: Yes Torx key: T8 Torx screw: M2.5×6.5 Manufacturer or Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person or Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Turning Holder SVJC for VCMT Indexable Inserts by Teknik Makina is designed for VCMT 1103 inserts; using the specified insert type ensures correct seating and cutting geometry. Does this holder provide coolant to the cutting edge? Yes, the Teknik Makina Turning Holder features internal coolant, which delivers fluid directly toward the insert to help control temperature and chip evacuation. Is the Turning Holder suitable for right-hand turning? The Turning Holder SVJC is specified for left-hand cutting; for right-hand operations a corresponding right-hand holder should be selected. Which fastening parts are required for the clamp? Assembly and insert clamping use a Torx T8 tool and an M2.5×6.5 screw, enabling secure fixation and straightforward insert changes. Who can help if I’m unsure about compatibility or setup? If you need assistance confirming whether the Turning Holder SVJC for VCMT Indexable Inserts fits your machine or application, METAV Werkzeuge offers expert advice — contact info@metav-werkzeuge.com or phone +49 2822 7131930. 110mm SVJC Turning Holder for VCMT Indexable Inserts, Internal Coolant, Left Cut, 12x12mm, 16mm Head Width - Teknik Makina

Clamping Holder — Turning Holder for CCMT 0602 Inserts by Teknik Makina The Clamping Holder is a robust Turning Holder designed for CCMT 0602 indexable inserts, offering secure clamping and precise right-hand turning for workshop and CNC lathe applications. Clamping Holder for CC-- 0602 inserts 110 mm Overall Length ISO SCLCR 1010 designation Right-hand turning, 95° cutting angle 12 mm Cutting Head Width Maximum Precision and Consistent Chip Control The holder delivers consistent clamping that stabilises the insert during machining, translating into reproducible results and reduced rework. With a 95° cutting angle and a design optimised for right-hand operation, the toolholder minimises vibration and supports predictable chip flow, which is particularly relevant for finishing passes and dimensional accuracy. The compatibility with CCMT 0602 inserts ensures a broad selection of grades and geometries for varied materials. Compact dimensions for tight set-ups and rapid tool changes Featuring an 110 mm Overall Length and a compact profile, the tool fits into confined turret stations and short overhang arrangements without sacrificing rigidity. The moderate 12 mm Cutting Head Width reduces interference while allowing reliable insert seating. For operators who need quick tool changes, the compact geometry simplifies access and reduces downtime, making the unit suitable for small-batch production and flexible workshop environments. Clear specification and part identification for easy selection The holder is specified under ISO SCLCR 1010, a standardised designation that helps you match geometry and clamping style to your machine setup. For users unfamiliar with ISO codes: this identifier denotes the toolholder family and size, enabling straightforward cross-referencing when ordering or replacing tooling. The second designation J06 further assists in selecting the correct shank and head variant for your turret or toolpost. Practical handling, installation and workshop support Installation is straightforward when the CCMT 0602 insert is seated and the clamp securely tightened; the holder’s dimensions (Width 10 mm, Height 10 mm) and guidance surfaces ensure repeatable positioning. For questions on fitment, recommended screw types or compatibility with specific turret interfaces, Teknik Makina products are backed by competent advice from METAV Werkzeuge. Professional support helps reduce setup time and avoids incorrect mounting that could affect tool life. We recommend the Teknik Makina Clamping Holder for precision turning tasks where rigidity and reproducibility matter most — for expert advice or application-specific guidance, contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930; WhatsApp +49 170 2837271 Bezeichnung: Clamping Holder Marke: Teknik Makina SKU: D398TM Compatible Inserts: CC-- 0602 Overall Length: 110 mm Weight: 0.105 kg ISO Designation: SCLCR 1010 Secondary Designation: J06 Width: 10 mm Height: 10 mm Cutting Head Width: 12 mm Cutting Angle: 95° Cutting Direction: right GTIN: 4061905153006 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ How do I know the Clamping Holder from Teknik Makina fits my machine? Check that your turret or toolpost accepts the SCLCR 1010 geometry and that the Clamping Holder dimensions (110 mm length, 10 mm width and height) are compatible; for confirmation, Teknik Makina specifications and METAV Werkzeuge can advise on fitment. Which inserts are compatible with this Turning Holder by Teknik Makina? The turning holder is made for CCMT 0602 indexable inserts; selecting the correct insert grade for material and cutting conditions will maximise the performance of the Teknik Makina Turning Holder. Is the Clamping Holder suitable for right-hand and left-hand turning? This specific Clamping Holder from Teknik Makina is designed for right-hand turning with a 95° cutting angle; for left-hand turning alternatives, please consult METAV Werkzeuge. Who can I contact for technical advice about the Teknik Makina Turning Holder? METAV Werkzeuge provides detailed, competent support for the Teknik Makina Turning Holder; email info@metav-werkzeuge.com or call +49 2822 7131930 for application guidance and technical data. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D398TM","sku":"D398TM","mpn":"D398TM","gtin13":"4061905153006","name":"Turning Holder SCLCR 1010 95° CC-- 0602","description":"SCLC for CCMT indexable inserts; 110 mm overall length; 10 mm width; 10 mm height; 12 mm cutting head width; 95° cutting angle; right-hand cutting; Manufacturer: Teknik Makina.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/9d/18/35/64/6435189d79db570c35c6c987/d398tm-main.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/d1/7e/de/62/62de7ed10aced56449540ec3/d398tm-technische-zeichnung.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/2e/7e/de/62/62de7e2e0aced56449540e8b/d398tm-artikelliste.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"Compatible Inserts","value":"CC-- 0602"},{"@type":"PropertyValue","name":"Overall Length","value":"110 mm"},{"@type":"PropertyValue","name":"Weight","value":"0.105 kg"},{"@type":"PropertyValue","name":"ISO Designation","value":"SCLCR 1010"},{"@type":"PropertyValue","name":"Shank Designation","value":"J06"},{"@type":"PropertyValue","name":"Width","value":"10 mm"},{"@type":"PropertyValue","name":"Height","value":"10 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"12 mm"},{"@type":"PropertyValue","name":"Cutting Angle","value":"95°"},{"@type":"PropertyValue","name":"Cutting Direction","value":"right"},{"@type":"PropertyValue","name":"Manufacturer","value":"Teknik Makina"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"Compatible with CC-- 0602 indexable inserts."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 110 mm."}},{"@type":"Question","name":"What are the key dimensions?","acceptedAnswer":{"@type":"Answer","text":"Width 10 mm, height 10 mm, cutting head width 12 mm."}},{"@type":"Question","name":"What is the cutting angle and direction?","acceptedAnswer":{"@type":"Answer","text":"Cutting angle 95° with right-hand cutting."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/d398tm","dateModified":"2026-03-31T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder Series"},{"@type":"Thing","name":"SCLC for CCMT indexable inserts"},{"@type":"Thing","name":"Right-Hand Turning Tools"}],"mentions":[{"@type":"Thing","name":"SCLCR 1010"},{"@type":"Thing","name":"CC-- 0602 inserts"},{"@type":"Thing","name":"J06 shank designation"}]}]}

Turning Holder — Clamping Holder SVJCR 1212 for VCMT 1103 by Teknik Makina A robust Turning Holder designed for secure clamping of VCMT 1103 indexable inserts in right-hand turning operations. Secure clamping for VCMT 1103 inserts 110 mm overall length for stable support ISO SVJCR 1212 for standard compatibility 12 x 12 mm shank for compact tool setups Precision clamping for consistent machining performance Designed to provide a reliable interface between machine and insert, this clamping solution ensures that VCMT 1103 inserts remain firmly positioned during cutting. The holder’s clamping geometry minimises micro-movement and vibration, which improves surface finish and repeatability. For operators who prioritise dimensional accuracy, the result is fewer reworks and a predictable process window that supports consistent batch production. Compact dimensions that enhance accessibility and rigidity With an overall length of 110 mm and a cross section of 12 mm by 12 mm, the holder delivers a balance of rigidity and reach. These dimensions allow access into tighter workpieces while maintaining the stiffness required for stable cutting. The narrow profile reduces interference in multi-tool or gang-tool setups, enabling more compact tooling arrangements without compromising on cutting performance. Standardised design for quick setup and compatibility The ISO designation SVJCR 1212 signals broad compatibility with established toolholding conventions, simplifying tool selection and inventory management. The secondary designation J11-F and the 90° cutting geometry support right-hand turning operations, allowing rapid insert changes and predictable cutting angles. This reduces setup time and helps maintain machine uptime in busy workshops. Built for professional workshops and precise turning tasks Machinists, toolroom technicians and production shops benefit from the holder’s focus on repeatability and ease of integration. The holder is particularly suitable for applications requiring secure clamping of indexable inserts in finishing and semi-finishing operations where tool stability directly affects part quality. Teknik Makina’s engineering aims to deliver dependable tooling that supports efficiency on the shop floor. We recommend Teknik Makina’s Turning Holder for precision right-hand turning — contact METAV Werkzeuge for personalised technical advice and ordering: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Bezeichnung: Turning Holder (Klemmhalter) Brand: Teknik Makina SKU: D460TM For indexable inserts: VCMT 1103 Compatible Inserts: VCMT 1103 Overall length: 110 mm Weight: 0.134 kg ISO designation: SVJCR 1212 Secondary designation: J11-F Width (shank): 12 mm Height: 12 mm Cutting head width: 12 mm Cutting angle: 90° Cutting direction: right GTIN: 4061905154003 Condition: new Availability: in Stock Label: Klemmhalter SVJCR 1212 90° VCMT 1103 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina and which operations is it for? The Turning Holder by Teknik Makina is designed specifically for VCMT 1103 indexable inserts and is intended for right-hand turning operations, providing a stable clamping interface for finishing and semi-finishing cuts. How does the SVJCR 1212 designation affect compatibility with existing tooling? SVJCR 1212 indicates an ISO-conformant toolholder form; the Teknik Makina Turning Holder follows this standard, which simplifies integration with toolposts and holders that accept SVJCR-pattern tooling and reduces the need for adapter solutions. Can METAV Werkzeuge help determine if this Turning Holder matches my machining needs? Yes, METAV Werkzeuge offers expert consultation for the Turning Holder by Teknik Makina; contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and technical clarification. Is the Turning Holder suitable for compact or gang-tool setups? The Turning Holder’s 12 mm by 12 mm shank and 110 mm length make it well suited for compact arrangements and gang-tool installations where a narrow profile and rigidity are required. 110mm Turning Holder SVJCR 1212 for VCMT 1103 Indexable Inserts, 90° Cut, 12mm×12mm, 0.134kg - Teknik Makina

Turning Holder — SDJC for DCMT Indexable Inserts (Flat Version) by Teknik Makina The Turning Holder (SDJC for DCMT Indexable Inserts) is a flat clamping solution designed for compact turning operations using indexable inserts, optimised for stable machining with left-hand cutting. Turning Holder SDJC for DCMT inserts Compatible with DCMT 11T3 indexable inserts Flat design for compact tool setups 12 x 12 mm shank for stable clamping Left-hand cutting with 93° cutting angle Precise Clamping for Stable Turning Results The flat Turning Holder is engineered to deliver consistent clamping and reduced tool deflection. With a 12 x 12 mm shank and a compact cutting head profile, the holder provides rigidity that translates into improved surface finish and repeatability. The restrained geometry of the flat version is particularly advantageous when space is limited on small tool posts or modular tool systems. Designed Specifically for DCMT 11T3 Inserts Compatibility with DCMT 11T3 indexable inserts allows the holder to be used with widely available carbide grades for a range of materials. DCMT inserts are indexable cutting tips with a standard geometry; this holder secures them reliably so that insert changes are quick and repeatable. For workshops that value tool-change efficiency, this combination reduces downtime and simplifies inventory by using a common insert size. Practical Mounting and Service Details Mounting and service are straightforward: the clamping screw uses a Torx T15 drive and the specified screw is M3.5x8.5, while the associated U-plate is TA030 fastened with an M5 screw. The holder’s clamping concept is designed for quick insert replacement and secure retention during interrupted cuts. Clear specification of hardware ensures compatibility with common maintenance toolkits and reduces the risk of assembly errors. Optimised Geometry for Left-Hand Cutting Applications The Turning Holder features left-hand cutting orientation and a 93° cutting angle, making it suitable for specific turning strategies and toolpath layouts. This geometry supports controlled chip flow and predictable cutting forces in left-hand operations. Manufacturers and job shops who run dedicated left-hand setups will appreciate the deliberate design that minimises setup changes and enhances machining consistency. For reliable turning performance choose the Turning Holder from Teknik Makina — for application advice or to confirm suitability contact METAV Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 (WhatsApp +49 170 2837271) Designation: Klemmhalter Brand: Teknik Makina SKU: D156TM Variant: SDJC for DCMT Indexable Inserts (flat version) Compatible Inserts: DCMT 11T3 Overall Length: 110 mm Shank Width: 12 mm Shank Height: 12 mm Cutting Head Width: 12 mm Cutting Height: 20 mm Cutting Direction: left Cutting Angle: 93° Clamping Holder ISO Designation: SDJCL 1212 Tool Holder Drill Rod Designation: J11-F Torx Key: T15 Torx Screw: M3.5x8.5 U Plate: TA030 U Plate Screw: M5 Weight: 0.13 kg Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder and who makes it? The Turning Holder by Teknik Makina, the SDJC for DCMT Indexable Inserts, is compatible with DCMT 11T3 indexable inserts, enabling the use of common insert geometries for versatile turning tasks. Is the Turning Holder suitable for right-hand operations? The Teknik Makina Turning Holder (SDJC for DCMT Indexable Inserts) is specified for left-hand cutting; for right-hand operations a corresponding right-hand holder should be selected. Which tools are required to mount the Turning Holder? To mount the SDJC Turning Holder from Teknik Makina use a Torx T15 for the clamping screw specified as M3.5x8.5, and the U-plate TA030 is secured with an M5 screw; these details ensure correct assembly. Can METAV Werkzeuge provide application guidance for the Turning Holder? Yes, METAV Werkzeuge offers expert advice on the Teknik Makina Turning Holder (SDJC for DCMT Indexable Inserts) — contact info@metav-werkzeuge.com or call +49 2822 7131930 for support. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D156TM","sku":"D156TM","mpn":"D156TM","name":"110mm Turning Holder SDJCL 1212 for DCMT Indexable Inserts, Flat, Left - Teknik Makina","description":"110mm turning holder for DCMT 11T3 indexable inserts; flat style, left-hand cutting, 12x12mm clamping, 20mm cutting height; robust and precise.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/59/40/bb/66/66bb40598ce61d4fe144ccc2/d154tm-main.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/59/40/bb/66/66bb40598ce61d4fe144ccc1/d154tm-technische-zeichnung.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/58/40/bb/66/66bb4058849b5d97e5677066/d154tm-artikelliste.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Overall length","value":"110 mm"},{"@type":"PropertyValue","name":"Suitable inserts","value":"DCMT 11T3"},{"@type":"PropertyValue","name":"Clamp size","value":"12x12 mm"},{"@type":"PropertyValue","name":"Cutting height","value":"20 mm"},{"@type":"PropertyValue","name":"Cutting direction","value":"Left"},{"@type":"PropertyValue","name":"Clamp designation ISO","value":"SDJCL 1212"},{"@type":"PropertyValue","name":"Shank designation","value":"J11-F"},{"@type":"PropertyValue","name":"Weight","value":"0.13 kg"},{"@type":"PropertyValue","name":"Torx key","value":"T15"},{"@type":"PropertyValue","name":"Torx screw","value":"M3.5x8.5"},{"@type":"PropertyValue","name":"Support plate","value":"TA030"},{"@type":"PropertyValue","name":"Support plate screw","value":"M5"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"Designed for DCMT 11T3 indexable inserts."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 110 mm."}},{"@type":"Question","name":"What are the clamp dimensions?","acceptedAnswer":{"@type":"Answer","text":"Clamp size is 12x12 mm (SDJCL 1212)."}},{"@type":"Question","name":"Which cutting direction is it for?","acceptedAnswer":{"@type":"Answer","text":"This is a left-hand cutting holder."}},{"@type":"Question","name":"What is the cutting height?","acceptedAnswer":{"@type":"Answer","text":"Cutting height is 20 mm."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Manufacturer is Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/","dateModified":"2026-03-31T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder"},{"@type":"Thing","name":"SDJC for DCMT Indexable Inserts"},{"@type":"Thing","name":"Flat Style, Left-Hand Cutting"}],"mentions":[{"@type":"Thing","name":"SDJCL 1212"},{"@type":"Thing","name":"DCMT 11T3"},{"@type":"Thing","name":"TA030 Support Plate"}]}]}

Turning Holder – SVJC for VCMT Indexable Inserts by Teknik Makina The Turning Holder (SVJC for VCMT indexable inserts) is a left‑hand turning tool designed for stable, precise machining with VCMT 1103 inserts in professional workshop environments. Turning Holder for VCMT 1103 indexable inserts ISO SVJCL 1212 shank for reliable clamping 110 mm overall length for stable turning 93° cutting angle for precise left‑hand cuts 12 x 12 mm shank with 16 mm cutting head width Exceptional Precision through Optimised Cutting Geometry Engineered for demanding turning tasks, this holder delivers consistent results thanks to its 93° cutting angle, which supports accurate chip formation and predictable tool behaviour during left‑hand operations. The geometry reduces vibration and improves surface finish, so machinists can rely on repeatable tolerances even in interrupted cuts. This focusing on geometry translates into time savings at the machine and fewer rework cycles. Reliable Compatibility with VCMT 1103 Inserts Compatibility is straightforward: the design accepts VCMT 1103 indexable inserts and conforms to the ISO SVJCL 1212 shank designation, offering a standardised interface for quick insert changes. For users unfamiliar with insert codes: VCMT describes a rhombic insert shape with a stable cutting edge, and the 1103 size denotes the insert dimensions suited for medium‑duty turning. The clear match between holder and insert simplifies tool selection and reduces setup errors. Robust Shank Dimensions for Workshop Stability With an 110 mm overall length and a 12 x 12 mm shank, the holder provides a compact but rigid toolbody that minimises overhang while maintaining accessibility in confined toolposts. The 16 mm cutting head width ensures the insert is well supported, which helps to lower deflection under load and improves tool life. These dimensions are chosen to balance reach and stiffness, making the holder suitable for a wide range of turning applications where stability matters. Designed for Professional Use and Easy Integration This product targets professional machinists and small to medium workshops seeking a dependable holder for left‑hand turning operations. Manufactured by Teknik Makina, the component is intended for integration into existing tooling systems without requiring special adapters. If you require guidance on selecting the correct insert grade or verifying compatibility with your lathe setup, technical support is available to help specify the best combination for your material and cutting conditions. We recommend Teknik Makina’s Turning Holder for precision left‑hand turning tasks — for personalised technical advice and support contact METAV Werkzeuge at info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271. Bezeichnung: Turning Holder Brand / Hersteller: Teknik Makina SKU: D384TM Compatible Inserts: VCMT 1103 ISO Designation: SVJCL 1212 Overall Length: 110 mm Shank Width: 12 mm Shank Height: 12 mm Cutting Head Width: 16 mm Cutting Direction: left Cutting Angle: 93° Weight: 0.135 kg GTIN: 4061905153938 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina and which size is recommended? The Turning Holder by Teknik Makina is designed for VCMT 1103 indexable inserts; VCMT 1103 is the recommended size to ensure correct seating and optimum cutting performance with this holder. Can the Teknik Makina Turning Holder be used for right‑hand turning? This specific Turning Holder is configured for left‑hand cutting direction; for right‑hand operations, a corresponding right‑hand holder from Teknik Makina should be selected to match your turning orientation. How does the SVJCL 1212 designation affect compatibility and mounting? The SVJCL 1212 ISO designation indicates the shank form and clamping interface, ensuring the Teknik Makina Turning Holder fits standard toolposts and accepts compatible inserts with predictable clamping and repeatability. Is technical advice available for selecting insert grades for the Turning Holder? Yes, METAV Werkzeuge provides expert consultation for tooling setups; for recommendations on insert grade and cutting parameters for the Turning Holder by Teknik Makina, contact info@metav-werkzeuge.com or call +49 2822 7131930. 93° Left SVJCL 1212 Turning Holder for VCMT 1103, 110mm Length - Teknik Makina

Clamp Holder for ER Indexable Inserts with Coolant — Clamp Holder by Teknik Makina The Clamp Holder is a robust turning tool designed to securely retain 16 ER indexable inserts with integrated internal coolant for improved chip control in metalworking operations. For 16 ER indexable inserts Internal coolant improves chip evacuation 125 mm overall length for compact rigidity 20x20 shank for secure mounting Precision clamping for consistent machining results The Clamp Holder from Teknik Makina provides stable clamping and precise positioning of indexable inserts, ensuring repeatable machining quality. Designed for 16 ER ISO inserts, the holder's accurate pocket geometry keeps the cutting edge fixed during heavy cuts, which reduces chatter and improves surface finish. Fast replacement of the insert is possible thanks to accessible mounting screws, so cycle times are minimized and uptime increases. Internal coolant that prolongs tool life and improves surfaces Equipped with Internal Coolant, this tool directs coolant to the cutting edge through internal channels, promoting efficient chip evacuation and reduced cutting temperatures. Lower thermal load means less wear on the insert and a more consistent tool life. For operations where surface quality is critical, targeted coolant flow supports the formation of a stable cutting zone and helps avoid built-up edge formation on the insert. Faster changeovers and lower operating costs A straightforward clamping concept reduces setup time and simplifies maintenance, allowing workshops to change only the worn insert rather than the entire tool. The holder uses Torx drive engagement for secure fixation and uncomplicated servicing, which helps keep Rüstzeiten (setup times) short and operating costs down. The compact 125 mm length and 20x20 shank size combine rigidity with accessibility in confined tool holders. Ideal applications and who benefits most This Clamp Holder is suited for job shops, production lines and precision turning environments that rely on indexable tooling for efficiency. Operators looking to optimize productivity with modular tooling will appreciate the combination of coolant capability and compatibility with 16 ER inserts. If you require advice on matching inserts or adapting toolholders to specific machines, METAV Werkzeuge offers expert consultation to support your selection and setup. Choose Teknik Makina's Clamp Holder with Internal Coolant for dependable performance — and contact METAV Werkzeuge for personalised technical advice at info@metav-werkzeuge.com, Tel: +49 2822 7131930, WhatsApp: +49 170 2837271 Clamp Holder for ER Indexable Inserts with Coolant Brand: Teknik Makina SKU: AP602TM Suitable Inserts: 16 ER Internal Coolant: Yes Dimension (Shank): 20x20 mm Overall Length: 125 mm Passscheibe: TA060 U-Platte: TA061 Torx Key: T15 Torx Screw: M3,5x11 GTIN: 4061905073922 Availability: In Stock Condition: new ECLASS: 21181004 Category: Planmesserkopf (Zerspanen) Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Clamp Holder from Teknik Makina and for which operations is it intended? The Clamp Holder by Teknik Makina is designed for 16 ER indexable inserts and is suitable for turning operations that benefit from modular insert systems and internal coolant to improve chip evacuation and tool life. Does the Clamp Holder include internal coolant channels and how does that help? Yes, the Teknik Makina Clamp Holder features internal coolant delivery; this channels coolant directly to the cutting edge, which lowers temperatures, enhances chip control and extends the service life of the insert. How quickly can I replace an insert in the Teknik Makina Clamp Holder? Insert replacement in the Clamp Holder is designed to be fast and straightforward, with accessible mounting screws for quick changeovers, reducing downtime and supporting continuous production. Can METAV Werkzeuge advise on choosing the right insert or toolholder configuration? METAV Werkzeuge provides comprehensive consultation and can assist in selecting the appropriate insert geometry and toolholder setup for your application; contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised support. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#AP602TM","sku":"AP602TM","mpn":"AP602TM","gtin13":"4061905073922","name":"Clamp Holder for ER Indexable Inserts With Coolant AP602TM","description":"Clamp holder for ER indexable inserts with internal coolant, fits 16 ER, 20x20, 125 mm overall length; robust clamping and quick insert change.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/82/6d/1d/64/641d6d82ff739ebda68866a7/ap602tm-main.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Compatible Inserts","value":"16 ER"},{"@type":"PropertyValue","name":"Dimension","value":"20x20"},{"@type":"PropertyValue","name":"Overall Length","value":"125 mm"},{"@type":"PropertyValue","name":"Internal Coolant","value":"yes"},{"@type":"PropertyValue","name":"Manufacturer","value":"Teknik Makina"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Which inserts fit this clamp holder?","acceptedAnswer":{"@type":"Answer","text":"Fits 16 ER indexable inserts."}},{"@type":"Question","name":"Does the holder have internal coolant?","acceptedAnswer":{"@type":"Answer","text":"Yes, the holder features internal coolant channels for improved chip evacuation and tool life."}},{"@type":"Question","name":"What are the dimensions and length?","acceptedAnswer":{"@type":"Answer","text":"Dimension 20x20 with an overall length of 125 mm."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Manufacturer: Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/clamp-holder-teknik-makina-order-online","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Clamp Holder Series"},{"@type":"Thing","name":"ER Indexable Inserts Compatibility"},{"@type":"Thing","name":"Internal Coolant Feature"}],"mentions":[{"@type":"Thing","name":"TA060 Passscheibe"},{"@type":"Thing","name":"TA061 U Plate"},{"@type":"Thing","name":"Suitable for deep drilling and chip evacuation"}]}]}

Turning Holder (Klemmhalter) — Turning Holder for CN-- 1204 Indexable Inserts by Teknik Makina The Turning Holder (Klemmhalter) is a robust Toolholder designed for precision external turning with CN-- 1204 indexable inserts, suitable for versatile workshop and production applications. Turning Holder DCLNL 2020 for CN-- 1204 inserts Overall Length 125 mm for extended reach 95° Cutting Angle for accurate profiling Left-hand cutting direction for specific operations Shank designation K12 for secure mounting Precision clamping for reliable Turning results Built to deliver consistent contact and repeatable geometries, this Turning Holder features the DCLNL 2020 ISO designation and is optimized for CN-- 1204 indexable inserts. The 125 mm Overall Length increases Reach without compromising Rigidity, while the 95° Cutting Angle supports accurate Profiling on external surfaces. This combination reduces Setup time and helps achieve consistent Surface Finish even in batch production. Stable mounting and clear Machine compatibility Featuring a Shank designation K12 and compact Cross-Section dimensions of 20 mm Width and 20 mm Height, the Holder ensures secure seating in standard tool posts. The Schneidkopf Width of 25 mm provides a solid Seat for the Insert, and the Left cutting direction is indicated for specific turning operations. These measurable parameters simplify selection and guarantee compatibility with many common lathe set-ups. Who benefits from this toolholder Small job shops, maintenance Workshops and precision Turning lines benefit from the clear specification and robust design of this Holder. As a component by Teknik Makina, it is intended for users who require reliable Clamp Force and quick Insert changes while keeping machine Downtime minimal. The toolholder design supports straightforward Handling and contributes to predictable production Output. Practical notes on Inserts and designation The DCLNL 2020 designation describes the Holder geometry and clamping orientation; CN-- 1204 refers to the Insert format commonly used for finishing and semi-finishing passes. For operators new to Indexable Insert systems: CN-- 1204 Inserts are rectangular turning grades designed for lateral support and easy replacement. Using the correct Insert grade for the workpiece material helps extend Tool Life and keeps Cutting Forces controlled. For tailored advice on application or compatibility with your machine, contact METAV Werkzeuge — we provide expert consultation and technical support: info@metav-werkzeuge.com, +49 2822 7131930. Technical Data Bezeichnung: Turning Holder (Klemmhalter) Marke: Teknik Makina SKU: D301TM ISO Bezeichnung: DCLNL 2020 Passende Wendeplatten: CN-- 1204 Bezeichnung 2 / Shank: K12 Gesamtlänge: 125 mm Breite: 20 mm Höhe: 20 mm Schneidekopf Breite: 25 mm Schneidenhöhe: 30 mm Schnittwinkel: 95° Schnittrichtung: left Gewicht: 0.441 kg GTIN: 4061905151415 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder and who produces it? The Turning Holder from Teknik Makina is designed for CN-- 1204 indexable inserts; Teknik Makina supplies the Holder geometry compatible with these inserts. Is the Turning Holder suitable for left-hand turning tasks? Yes, the Teknik Makina Turning Holder is specified with a left cutting direction and a 95° cutting angle, making it appropriate for left-hand external Turning operations. How long is the Turning Holder and what shank does it use? The Turning Holder has an Overall Length of 125 mm and uses the Shank designation K12, ensuring stable mounting in compatible tool posts. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D301TM","sku":"D301TM","mpn":"D301TM","gtin13":"4061905151415","name":"125mm DCLN Turning Holder for CN-- 1204 Indexable Inserts","description":"125mm DCLN turning holder for CN-- 1204 indexable inserts; 95° cutting angle; ISO designation DCLNL 2020; 20mm width/height; 25mm cutting head width; left-hand cutting; 0.441 kg; Teknik Makina.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/39/7e/de/62/62de7e390f56dbb4de4dbef9/d301tm-artikelliste.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/04/8d/e2/62/62e28d040f56dbb4de4e1285/d301tm-main.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/d7/7e/de/62/62de7ed7148ec6b71020ffb4/d301tm-technische-zeichnung.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"Length","value":"125 mm"},{"@type":"PropertyValue","name":"Compatible Inserts","value":"CN-- 1204 indexable inserts"},{"@type":"PropertyValue","name":"Cutting Angle","value":"95°"},{"@type":"PropertyValue","name":"ISO Designation","value":"DCLNL 2020"},{"@type":"PropertyValue","name":"Width","value":"20 mm"},{"@type":"PropertyValue","name":"Height","value":"20 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"25 mm"},{"@type":"PropertyValue","name":"Cutting Direction","value":"left"},{"@type":"PropertyValue","name":"Weight","value":"0.441 kg"},{"@type":"PropertyValue","name":"Material","value":"Steel"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"Designed for CN-- 1204 indexable inserts."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 125 mm."}},{"@type":"Question","name":"What is the cutting angle?","acceptedAnswer":{"@type":"Answer","text":"Cutting angle is 95°."}},{"@type":"Question","name":"What is the ISO designation?","acceptedAnswer":{"@type":"Answer","text":"ISO designation DCLNL 2020."}},{"@type":"Question","name":"What are the dimensions of the holder?","acceptedAnswer":{"@type":"Answer","text":"Width 20 mm, height 20 mm, cutting head width 25 mm."}},{"@type":"Question","name":"What is the cutting direction?","acceptedAnswer":{"@type":"Answer","text":"Left-hand cutting direction."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/125mm-dcln-turning-holder-d301tm","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"DCLN Turning Holder Series"},{"@type":"Thing","name":"Indexable Insert Turning Solutions"},{"@type":"Thing","name":"Workshop and Lathe Applications"}],"mentions":[{"@type":"Thing","name":"CN-- 1204 indexable inserts"},{"@type":"Thing","name":"ISO DCLNL 2020"},{"@type":"Thing","name":"Left-hand turning"}]}]}

Turning Holder (Klemmhalter) by Teknik Makina The Turning Holder is a right-hand clamp holder designed for CN-- indexable inserts, supplying precise and stable tool positioning for metalturning applications. Compatible with CN-- 1204 inserts Supports CN-- 1606 and CN-- 1906 sizes 95° Cutting Angle for consistent chip control ISO DCLNR 2020 format for standard toolposts 125 mm overall length for workshop versatility Consistent Cutting with a 95° Geometry The Turning Holder from Teknik Makina features a 95° cutting angle that delivers reliable contact between Insert and Workpiece, reducing vibration and improving surface finish. This specific geometry supports stable chip flow and predictable tool engagement, which helps to extend Insert life and maintain process repeatability. For workshops focused on dimensional accuracy, the defined cutting angle reduces setup iterations and contributes to faster cycle times. Broad Insert Compatibility and Clear Sizing Designed to accept CN-- 1204, CN-- 1606 and CN-- 1906 indexable inserts, this Clamp holder offers flexibility across a range of turning tasks. The toolholder’s 125 mm overall length and a cutting-head width of 25 mm pair with a 20 mm body width and height to fit common turret stations while keeping the centre height consistent. For those less familiar: CN-- denotes a negative, 80° diamond-shaped insert with chipbreaker options; compatible sizes indicate Insert footprint and thickness. This compatibility reduces the need for multiple specialized holders, simplifying inventory. Robust Design for Professional Workshops The holder is built to the ISO designation DCLNR 2020, which indicates a right-hand (R) clamping style with a 20 × 20 mm shank—favoured for stable clamping and easy interchange on standard toolposts. Weighing approximately 0.441 kg, the component balances rigidity and manageable handling during tool changes. The right-hand cutting direction and precise clamping geometry make this Clamp holder suitable for machinists and maintenance teams who demand repeatable set-ups and straightforward Insert replacement. Choose the Teknik Makina Turning Holder for dependable 95° performance — for personalised technical advice or to confirm fitment contact METAV Werkzeuge by eMail at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271; METAV offers competent consultation and support for professional tooling decisions. Key Technical Specifications Bezeichnung: Turning Holder (Klemmhalter) Marke: Teknik Makina SKU: D166-1TM ISO Bezeichnung: DCLNR 2020 Bezeichnung 2: K12 Passende Wendeschneidplatten / Compatible indexable inserts: CN-- 1204, CN-- 1606, CN-- 1906 Gesamtlänge / Overall length: 125 mm Breite / Width: 20 mm Höhe / Height: 20 mm Schneidekopf Breite / Cutting head width: 25 mm Schnittwinkel / Cutting angle: 95° Schnittrichtung / Cutting direction: right Schneidenhöhe / Cutting height: 30 mm Gewicht / Weight: 0.441 kg GTIN: 4061905151408 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder by Teknik Makina and what does CN-- mean? The Teknik Makina Turning Holder accepts CN-- 1204, CN-- 1606 and CN-- 1906 indexable inserts; CN-- denotes a negative, 80° diamond-shaped Insert geometry commonly used for robust turning and allows a range of chipbreaker or geometry options. Is the Teknik Makina Turning Holder suitable for standard toolposts? Yes, the Turning Holder carries the ISO designation DCLNR 2020 which corresponds to a 20 × 20 mm shank and is designed for straightforward mounting on standard toolposts used in many lathes and turret systems. How does the 95° cutting angle benefit machining with this Clamp holder? The 95° cutting angle on the Teknik Makina Clamp holder improves chip control and contact stability, which typically leads to better surface finish and longer Insert life during continuous turning operations. Can METAV Werkzeuge provide help with selecting the right Turning Holder model? METAV Werkzeuge offers expert advice for tooling selection; contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised support to ensure the Teknik Makina Turning Holder meets your workshop requirements. 95° 125mm DCLN Turning Holder for CN-- 1204 Indexable Inserts, DCLNR 2020 — Teknik Makina

Turning Holder (Klemmhalter) by Teknik Makina Turning Holder (Klemmhalter) is a precision tool holder designed for DN-- 1506 indexable inserts, providing secure clamping and stable performance for left-hand turning operations. For DN-- 1506 indexable inserts 125 mm overall length for extended reach 93° cutting angle for improved chip control Left-hand cutting direction compatibility ISO DDJNL 2020 designation for standardized fit Secure compatibility with DN-- 1506 inserts for consistent results This tool clamp is built specifically to accept DN-- 1506 indexable inserts, ensuring repeatable seating and minimal runout during cutting. Indexable inserts are replaceable carbide tips that allow fast swap-out without regrinding; the holder’s geometry guarantees a stable contact surface so insert seating remains precise over many tool changes. As a result, setup times are reduced and part-to-part consistency is improved. Geometry tuned for stable turning and reliable chip behaviour The turning tool features a 93° cutting angle and left-hand cutting orientation that combine to offer controlled chip flow and reduced cutting forces. A defined cutting geometry helps maintain tool life by distributing load across the insert edge, while the holder’s Cutting Head Width accommodates typical insert sizes for robust engagement. This leads to fewer tool changes and more predictable machining cycles. Compact design with practical reach and secure clamping With a 125 mm Overall Length and a compact cross-section, the clamp holder balances reach and stiffness for many lathe setups. The holder’s 20 mm Width and Height, plus a 25 mm Cutting Head Width, provide a rigid interface that resists vibration in medium-duty turning applications. The ISO designation DDJNL 2020 signals adherence to recognized tooling standards, simplifying tool selection and replacement in professional workshops. Suited for workshop production and precision turning environments Machine Shops and production lines that work with standard indexable inserts benefit from the holder’s repeatability and standardized fit. The compact footprint makes the clamp suitable for confined tool posts while its standardized mounting and ISO designation support quick integration into existing tool systems. For setups requiring left-hand turning or specific edge geometries, this holder offers a reliable base for consistent component quality. Choose the Teknik Makina Turning Holder for robust, production-ready clamping — for tailored technical advice or to confirm fit, contact METAV Werkzeuge: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Designation: Klemmhalter Brand: Teknik Makina SKU: D310TM Secondary designation: DDJNR for DN-- Indexable Inserts Compatible Indexable Inserts: DN-- 1506 Overall Length: 125 mm ISO designation: DDJNL 2020 Secondary designation 2: K15 Width: 20 mm Height: 20 mm Cutting Head Width: 25 mm Cutting Edge Height: 35 mm Cutting Direction: Left Cutting Angle: 93° Weight: 0.425 kg GTIN: 4061905150722 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Is the Turning Holder (Klemmhalter) compatible with DN-- 1506 inserts? Yes, the Turning Holder (Klemmhalter) from Teknik Makina is designed for DN-- 1506 indexable inserts and ensures stable seating and reliable performance with that insert type. What cutting direction does the Teknik Makina Turning Holder support? The Teknik Makina Turning Holder (Klemmhalter) is configured for left-hand cutting operations, making it suitable for applications and setups that require left-oriented tool paths. How do I get technical support or confirm suitability for my machine? For tailored technical advice and to confirm that the Turning Holder (Klemmhalter) from Teknik Makina meets your requirements, contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. 125mm DDJNL 2020 Turning Holder for DN-- 1506 Indexable Inserts, 93° Cut, Left - Teknik Makina

Turning Holder (Klemmhalter) by Teknik Makina The Turning Holder is a robust toolholder designed for DN-- 1504 indexable inserts, optimised for precise external turning on lathes and industrial machining applications. Turning Holder »Klemmhalter« DDJNR 2020 for DN-- 1504 125 mm Overall Length for stable mounting 20 mm Shank Width and 20 mm Height for compact fit 25 mm Cutting Head Width for secure clamping Right-hand cutting with 93° Cutting Angle Precision and Stability for consistent Turning results The Turning Holder delivers precision through its DDJNR 2020 ISO designation and a 93° Cutting Angle, which together ensure consistent contact and predictable chip flow during external turning. The clamping geometry minimises vibration and improves surface finish, so operators can rely on repeatable part quality. This stability reduces rework and increases machine uptime, making the holder an efficient choice for production environments. Compact design that supports secure toolholding With a 125 mm Overall Length and a 20 mm Shank Width combined with a 25 mm Cutting Head Width, the holder offers a compact footprint without sacrificing clamping force. The reduced overhang enhances rigidity, allowing higher feed rates and better dimensional accuracy on long runs. The compact dimensions also simplify setup in confined turret stations and enable flexible tool layouts on multi-station turrets. Suitable inserts and machining direction for targeted applications This holder is specified for DN-- 1504 indexable inserts and configured for right-hand cutting, making it particularly suited to standard external turning tasks on conventional and CNC lathes. The design supports stable insertion and straightforward indexability of the inserts, which facilitates quick tool changes and reduces downtime. Ideal Users include job shops and production facilities requiring dependable turning solutions for steel and alloy components. Built for workshop reliability with focused manufacturer support Produced by Teknik Makina, the holder reflects precise manufacturing tolerances and consistent quality control. The ISO designation DDJNR 2020 indicates compatibility with established insert geometries, simplifying tooling procurement and inventory. For more complex toolset integration or advice on insert selection, METAV Werkzeuge provides competent consultation and can assist with technical details and application optimisation. Choose Teknik Makina's robust Turning Holder for reliable, repeatable turning performance — contact METAV Werkzeuge for expert consultation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Bezeichnung: Klemmhalter Marke / Hersteller: Teknik Makina SKU: D171TM For Indexable Inserts: DN-- 1504 Overall Length: 125 mm Weight: 0.426 kg ISO Designation: DDJNR 2020 Secondary Designation: K15 Shank Width: 20 mm Shank Height: 20 mm Cutting Head Width: 25 mm Cutting Angle: 93° Cutting Direction: right GTIN: 4061905150845 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder by Teknik Makina and which insert type is recommended? The Turning Holder (Klemmhalter) from Teknik Makina is designed for DN-- 1504 indexable inserts; users typically select inserts matching DN-- 1504 geometry to ensure correct seating and optimal cutting performance with this toolholder. Is the Turning Holder suitable for high-feed production turning on CNC lathes? Yes, the Teknik Makina Turning Holder’s compact 125 mm Overall Length and rigid clamping geometry provide the stability required for higher feed rates, making it suitable for repetitive production turning on CNC lathes. How does the 93° Cutting Angle affect machining with this Turning Holder? A 93° Cutting Angle in the Teknik Makina Turning Holder results in a neutral to slightly positive approach that balances strength and chip control, which supports consistent surface finish and tool life in general turning operations. Who can advise on selecting the right Turning Holder configuration for my machine? METAV Werkzeuge offers comprehensive and competent consultation for the Teknik Makina Turning Holder; if you are unsure whether this holder meets your requirements, contact METAV at info@metav-werkzeuge.com or call +49 2822 7131930 for personalised support. 93° DDJNR 2020 Turning Holder for DN-- 1504, 125mm Length, Right - Teknik Makina

Clamping Holder (Turning Holder) by Teknik Makina The Clamping Holder is a precision Turning Holder designed to secure DN-- 1506 indexable inserts for stable, right-hand turning operations in metalworking environments. Clamping Holder DDJNR 2020 for DN-- 1506 inserts Secure clamp design for consistent cutting 125 mm overall length for stable reach 25 mm cutting head width for rigid support Right-hand cutting with 93° cutting angle Stable Clamping for Consistent Turning Accuracy The Clamping Holder secures indexable tooling with a firm clamp mechanism that reduces vibration and runout, delivering repeatable Turning Accuracy part after part. By combining a rigid 25 mm Schneidkopf Breite (Cutting Head Width) with a controlled clamp geometry, the toolholder minimises chatter and supports higher surface quality on workpieces. This stability translates directly into less rework and improved cycle-time reliability for production runs. ISO-Compatible Interface for Fast Insert Changes Built to the DDJNR 2020 ISO designation, this toolholder accepts DN-- 1506 indexable inserts, enabling quick insert replacement and standardised tooling management. Indexable Inserts are carbide tips that can be rotated or replaced without changing the entire tool; this reduces downtime and tooling cost. The holder’s 125 mm Gesamtlänge (Overall Length) offers a balance between accessibility and rigidity, making it straightforward to integrate into existing turret setups. Robust Dimensions for Demanding Workshop Use With a Holder Breite of 20 mm and Höhe of 20 mm, the design emphasises durability while maintaining compact mounting. The defined Schnittwinkel of 93° and right-hand cutting orientation support typical turning profiles and make the component suitable for both prototype shops and serial production. Users benefit from a reliable mechanical fit that withstands repeated insert changes and extended cutting cycles. Clear Fitment and Installation Guidance The toolholder’s ISO Bezeichnung DDJNR and secondary Bezeichnung K15 clarify compatibility with standard toolposts and turrets, simplifying procurement and inventory. The right-hand Schnittrichtung (cutting direction) should be matched to lathe setup to ensure correct chip flow and tool life. If uncertainties remain about integration or specific machining tasks, METAV Werkzeuge provides competent technical advice and installation support to ensure optimal use. Strong recommendation: Choose Teknik Makina’s Clamping Holder for ISO-compliant, vibration-reducing turning performance — for expert selection help contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271) Technical Information Bezeichnung: Clamping Holder Brand: Teknik Makina SKU: D170TM For Indexable Inserts: DN-- 1506 ISO Designation: DDJNR 2020 Secondary Designation: K15 Overall Length: 125 mm Width: 20 mm Height: 20 mm Cutting Head Width: 25 mm Cutting Direction: Right Cutting Angle: 93° Weight: 0.425 kg GTIN: 4061905150678 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Which inserts fit the Clamping Holder from Teknik Makina? The Clamping Holder (Turning Holder) by Teknik Makina is designed for DN-- 1506 indexable inserts, following the DDJNR 2020 interface for straightforward compatibility. Is the holder suitable for production runs and repeated insert changes? Yes, the Turning Holder from Teknik Makina features a secure clamp design and a 125 mm overall length that provide the rigidity and serviceability needed for serial production and frequent insert swaps. What cutting direction and angle does the holder support? The Teknik Makina Clamping Holder is configured for right-hand cutting with a defined 93° cutting angle, so match the holder orientation to the lathe setup for correct chip evacuation. Can METAV Werkzeuge advise on tool selection and setup? METAV Werkzeuge offers extensive, competent consultation for the Clamping Holder by Teknik Makina; contact info@metav-werkzeuge.com or phone +49 2822 7131930 for technical guidance. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D170TM","sku":"D170TM","mpn":"DDJNR 2020","gtin13":"4061905150678","name":"Turning Holder DDJNR 2020, 125 mm, 93° for DN-- 1506 Indexable Inserts","description":"125 mm turning holder for DN-- 1506 indexable inserts, ISO DDJNR 2020, right-cut, 93° cutting angle; robust clamping design, 20 mm width and height, 25 mm cutter head width.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/06/8d/e2/62/62e28d060f56dbb4de4e1286/d167tm-main.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/3f/7e/de/62/62de7e3f0aced56449540e96/d167tm-artikelliste.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/db/7e/de/62/62de7edb148ec6b71020ffb9/d167tm-technische-zeichnung.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"Length","value":"125 mm"},{"@type":"PropertyValue","name":"For indexable inserts","value":"DN-- 1506"},{"@type":"PropertyValue","name":"ISO designation","value":"DDJNR 2020"},{"@type":"PropertyValue","name":"Cutting direction","value":"right"},{"@type":"PropertyValue","name":"Cutting angle","value":"93°"},{"@type":"PropertyValue","name":"Width","value":"20 mm"},{"@type":"PropertyValue","name":"Height","value":"20 mm"},{"@type":"PropertyValue","name":"Cutter head width","value":"25 mm"},{"@type":"PropertyValue","name":"Weight","value":"0.425 kg"},{"@type":"PropertyValue","name":"Shank designation","value":"K15"}]} ,{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What length is the turning holder?","acceptedAnswer":{"@type":"Answer","text":"The turning holder has a total length of 125 mm."}},{"@type":"Question","name":"Which inserts does it accept?","acceptedAnswer":{"@type":"Answer","text":"Designed for DN-- 1506 indexable inserts."}},{"@type":"Question","name":"What is the ISO designation?","acceptedAnswer":{"@type":"Answer","text":"ISO designation DDJNR 2020."}},{"@type":"Question","name":"What is the cutting angle and direction?","acceptedAnswer":{"@type":"Answer","text":"93° cutting angle with right cutting direction."}},{"@type":"Question","name":"What are the main dimensions?","acceptedAnswer":{"@type":"Answer","text":"Width and height are 20 mm, cutter head width is 25 mm."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Manufacturer: Teknik Makina."}}]} ,{"@type":"ItemPage","url":"https://metav-shop.de/turning-holder-ddjnr-2020-d170tm","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder Series"},{"@type":"Thing","name":"Toolholding For Indexable Inserts"},{"@type":"Thing","name":"Workshop Turning Applications"}],"mentions":[{"@type":"Thing","name":"DN-- 1506 indexable inserts"},{"@type":"Thing","name":"ISO DDJNR 2020"}]}]}

Clamping Holder (Turning Holder) — Teknik Makina The Clamping Holder (Turning Holder) is a precision tool designed for left-hand turning with DN-- 1504 indexable inserts, ideal for compact toolpost setups and reliable machining tasks. Compatible with DN-- 1504 indexable inserts Total length 125 mm for stable reach Left-hand cutting direction, 93° cutting angle ISO designation DDJNL 2020 for easy integration Compact 20 mm Width and Height for tight spaces High-precision support for left-hand turning Engineered to deliver consistent positioning during operations, this clamping solution minimises tool deflection and supports repeatable results. The 93° cutting angle provides a stable engagement geometry that improves chip control, so machinists benefit from reliable surface finish and reduced rework. The clear design focus on accuracy converts technical features into measurable productivity gains on the shop floor. Compact form factor for constrained toolposts With an overall length of 125 mm and a compact cross-section of 20 mm by 20 mm, the holder is designed to fit into tight setups where space is limited. The 25 mm cutting-head width allows close access to the workpiece without sacrificing rigidity, which means easier setup and improved accessibility for confined turning applications in small lathes and multi-tool turrets. Built for compatibility and fast integration Matching the common DN-- 1504 insert geometry and specified by ISO designation DDJNL 2020, the holder integrates into existing tool assortments with minimal adaptation. This compatibility reduces changeover time and simplifies inventory management, so workshops can introduce the component into production without long qualification cycles or special adapters. Practical suitability and support for professional users Weighing 0.426 kg, the holder balances mass and manoeuvrability for quick mounting and stable cutting performance. Targeted at professional workshops and precision machinists, the design emphasises straightforward use with indexable inserts for turning tasks. If there is any uncertainty about fitment or application, METAV Werkzeuge offers competent technical advice and can assist with selection and integration into existing tool systems. For dependable left-hand turning with proven compatibility, choose the Teknik Makina Clamping Holder — contact METAV Werkzeuge for tailored technical advice at info@metav-werkzeuge.com or +49 2822 7131930. Designation: Clamping Holder (Klemmhalter) Brand / Manufacturer: Teknik Makina SKU: D313TM Compatible Indexable Inserts: DN-- 1504 Overall Length: 125 mm Weight: 0.426 kg ISO Designation: DDJNL 2020 Alternative Designation: K15 Width: 20 mm Height: 20 mm Cutting Head Width: 25 mm Cutting Angle: 93° Cutting Direction: left GTIN: 4061905150869 Label: Klemmhalter DDJNL 2020 93° DN-- 1504 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Clamping Holder by Teknik Makina? The Clamping Holder (Turning Holder) from Teknik Makina is compatible with DN-- 1504 indexable inserts, ensuring correct seating and orientation for standard turning operations. Is the Clamping Holder suitable for left-hand turning tasks? Yes, the Teknik Makina Clamping Holder (Turning Holder) is specified for left cutting direction and uses a 93° cutting angle appropriate for left-hand turning applications. How does the DDJNL 2020 designation affect installation? The DDJNL 2020 ISO designation of the Clamping Holder (Turning Holder) by Teknik Makina indicates standardised geometry, which simplifies mounting and interchangeability with holders and inserts that follow the same ISO reference. Who can provide technical support for the Clamping Holder? METAV Werkzeuge offers comprehensive advice for the Teknik Makina Clamping Holder (Turning Holder); contact their team at info@metav-werkzeuge.com or +49 2822 7131930 for application help or additional technical data. 125mm DDJNR Turning Holder for DN-- 1504 Indexable Inserts, 93° Left - Teknik Makina

Turning Holder for WN-- 0604 Indexable Inserts from Teknik Makina The Turning Holder is a precision Clamping Toolholder designed for left-hand turning with WN-- 0604 indexable inserts, ideal for accurate external machining on lathes and turning centres. For WN-- 0604 indexable inserts 125 mm overall length for secure reach 95° cutting angle for controlled chip flow Left-hand cutting direction for specific turning tasks ISO DWLNL 2020 specification for standardised fit Precise Design for Reliable Turning Performance The Clamping Holder is engineered to deliver stable and repeatable results in turning applications. With an Overall Length of 125 mm and a Cutting Angle of 95°, the toolholder gives a balanced combination of reach and stiffness that reduces vibration and enhances surface finish. The compatibility with WN-- 0604 Indexable Inserts ensures quick insert changes and predictable cutting behaviour, while the left-hand configuration supports specific setup requirements on many turning centres. For operators who value consistency, this design reduces downtime and improves first-pass yield. What the Dimensions Mean for Setup and Rigidity A toolholder's Width (20 mm), Height (20 mm) and Cutting Head Width (25 mm) determine how the holder mounts in the toolpost and how it resists cutting forces. The compact cross-section of this holder provides a low-profile mounting that still maintains rigidity, making it suitable for medium-duty external turning. The listed ISO designation DWLNL 2020 clarifies Pocket and Shank geometry so the holder integrates with existing tool systems without adaptation. If unfamiliar with ISO codes: this designation defines the holder geometry and insert seating to guarantee correct positioning of the insert for predictable tool life. Practical Application and Compatibility in the Workshop This Toolholder is intended primarily for turning tasks that use WN-- 0604 inserts; it performs well in batch production and job-shop environments where frequent insert changes are standard. The left-hand cutting direction is useful when the machining sequence or part orientation requires that approach; using the correct handedness prevents interference and ensures chip evacuation in the intended direction. For users new to indexable tooling, a WN-- 0604 insert is a commonly available format that balances economy and cutting performance across a wide range of steels and non-ferrous materials. Who Benefits from This Holder and How to Integrate It Manufacturers and workshops seeking a compact, standardised holder benefit from the predictable mounting and maintenance cycle offered by this product. The holder’s ISO-based design minimises setup errors and streamlines inventory management when paired with WN-- 0604 inserts. Integrating the holder into a tooling setup typically requires verifying toolpost accommodation and confirming the left-hand orientation relative to spindle rotation; once installed, the result is a dependable tool position and repeatable machining quality that supports efficient production. Strong recommendation: Specify the Teknik Makina Turning Holder when you need a robust, ISO-compatible clamping solution for left-hand turning — METAV Werkzeuge provides expert technical advice and support, contactable by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271. Bezeichnung: Klemmhalter Brand: Teknik Makina SKU: D329TM GTIN: 4061905150951 Compatible Inserts: WN-- 0604 ISO designation: DWLNL 2020 Overall length: 125 mm Width: 20 mm Height: 20 mm Cutting Head Width: 25 mm Cutting Height: 26 mm Cutting direction: Left Cutting angle: 95° Weight: 0.436 kg Condition: New Availability: In Stock Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Turning Holder by Teknik Makina is designed for WN-- 0604 indexable inserts, so you should select inserts with that designation to ensure correct seating and reliable cutting performance. Is the Turning Holder suitable for heavy-duty turning? The Teknik Makina Turning Holder offers a compact cross-section and 125 mm length; while it provides good rigidity for many operations, very heavy-duty cutting may require a larger shank or alternative holder designed specifically for high radial forces. How do I determine the correct cutting direction for this holder? This particular holder is configured for left-hand cutting; confirm that the left-hand orientation matches your spindle rotation and part setup before installation to ensure proper chip flow and safe operation. Can METAV Werkzeuge help with selection and technical questions? Yes — METAV Werkzeuge offers competent advice for tooling selection and technical data verification; contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised support. 95° Cutting Angle Turning Holder DWLNL 2020 for WN-- 0604, 125mm Length, Left-Hand - Teknik Makina

Clamp Holder (Turning Holder) from Teknik Makina The Clamp Holder (Turning Holder) is a precision tool holder designed for turning operations with WN-- 0604 indexable inserts, suitable for workshop and production use. Clamp Holder DWLNR 2020 for WN-- 0604 Inserts 125 mm Overall length for stable tool engagement 95° Cutting angle for precise right-hand turning 25 mm Cutting head width for robust chip control 20 x 20 mm Shank for secure clamping Precision and stability for demanding turning operations Equipped for reliable machining, this holder accepts WN-- 0604 indexable inserts and follows the DWLNR 2020 ISO designation, which ensures standardized seating and repeatable tool geometry. The 125 mm Overall length contributes to stable engagement in the toolpost, while the 95° Cutting angle provides a controlled approach for right-hand turns. As a result, users benefit from consistent surface finish and reduced vibration during medium to heavy interrupted cuts. Durable clamping and robust head design for longevity Manufactured to withstand workshop conditions, the holder's 25 mm Cutting head width and solid shank dimensions deliver improved chip control and rigidity. The secure clamping geometry minimises insert movement under load, reducing edge wear and the need for frequent re‑indexing. This design focus translates directly into longer tool life and fewer machine stops for changeover, supporting higher overall productivity in continuous production environments. Tailored for metalworking professionals and job shops This tool is intended for machinists and production teams that require a compact, reliable turning solution compatible with WN-- 0604 indexable inserts. The right-hand cutting orientation and standardised ISO form make the holder especially suitable for turning steel and cast components where repeatability and tool-change speed matter. Workshops benefit from easy integration into existing setups and predictable cutting behaviour that simplifies process planning. Easy setup and practical notes for users Installation follows common workshop practice: the DWLNR 2020 contour aligns the insert seat for correct rake and clearance, and the holder's 20 x 20 mm Shank fits standard toolposts. For those new to indexable tooling, indexable inserts are replaceable cutting tips that can be rotated or exchanged without regrinding the tool body, offering cost-effective maintenance. Expect straightforward mounting, dependable clamping, and consistent contact geometry when using correct insert clamping torque and seat cleanliness. Choose the Teknik Makina Clamp Holder for dependable precision turning — for expert application advice and support contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp: +49 170 2837271) Technical Data for Accurate Setup Designation: Clamp Holder Brand / Manufacturer: Teknik Makina SKU: D177TM For Indexable Inserts: WN-- 0604 ISO Designation: DWLNR 2020 Secondary designation: K06 Overall length: 125 mm Shank width: 20 mm Shank height: 20 mm Cutting head width: 25 mm Cutting angle: 95° Cutting direction: Right Condition: New Availability: In Stock GTIN: 4061905150890 Weight: 0.436 kg Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Clamp Holder from Teknik Makina and which size is required? The Clamp Holder from Teknik Makina is compatible with WN-- 0604 indexable inserts; these inserts match the DWLNR 2020 seat and provide the expected cutting geometry for the holder. Is the Teknik Makina Clamp Holder suitable for right-hand turning only? Yes, the Teknik Makina Clamp Holder is designed for right-hand cutting with a 95° Cutting angle, making it appropriate for standard right-hand turning operations. How does the 125 mm length of the Clamp Holder affect machining setup? A 125 mm overall length offers a balance between reach and rigidity; the Teknik Makina Clamp Holder provides stable engagement while keeping overhang low, which helps to reduce vibration and improve surface finish. Can METAV Werkzeuge advise on application and selection for this turning holder? METAV Werkzeuge offers comprehensive consultation for the Teknik Makina Clamp Holder and can assist with selection, technical data, and application tips — contact info@metav-werkzeuge.com or +49 2822 7131930 for support. 95° DWLNR 2020 Turning Holder for WN-- 0604, 125mm Length, 20x20mm — Teknik Makina

Turning Holder — Toolholder for TN-- 2204 indexable inserts by Teknik Makina The Turning Holder is a compact, rigid toolholder designed for TN-- 2204 indexable inserts and engineered for precise right-hand turning in metalworking applications. Turning Holder MTJNR 2020 for TN-- 2204 inserts 125 mm overall length for compact setups 93° cutting angle for accurate right-hand turning 25 mm cutting head width for stable engagement 20×20 mm shank dimensions for secure clamping Precision and rigidity for consistent turning results The MTJNR 2020 designation signals a standardised interface that supports repeatable setups. With a total length of 125 mm and a 20×20 mm shank, this toolholder minimises overhang and vibration, delivering improved Surface Finish and dimensional accuracy. The compact construction reduces deflection under load, which means fewer reworks and more reliable cycle times for daily production tasks. Fast insert changes and clear compatibility for efficient workflows Designed specifically for TN-- 2204 indexable inserts, the holder simplifies insert replacement and tool presetting. Indexable inserts are carbide cutting edges that can be rotated or replaced without moving the entire tool, reducing downtime and tooling costs. The ISO-style clamping and the secondary designation K22 allow quick alignment in standard tool posts, making the holder a practical choice for machining centres and manual lathes alike. Stable cutting geometry for right-hand operations The toolholder provides a 93° cutting angle optimised for right-hand turning, pairing a rigid cutting head width of 25 mm with a cutting height of 40 mm to maintain consistent chip formation and tool engagement. This geometry supports predictable cutting forces and helps extend insert life by ensuring even wear distribution. For operators, that translates directly into longer tool life and fewer tool changes during medium-duty turning tasks. Workshop-ready design and service support Installation requires standard fastening procedures and basic clamping checks to ensure optimal performance; the solid shank dimensions and clear ISO marking make alignment straightforward. If further technical data or assistance is needed—for example, to match coolant strategies or to verify compatibility with specific machine tool setups—METAV Werkzeuge provides expert consultation and practical support. Experienced technicians can help integrate this Turning Holder into existing tool setups and advise on best practices for maintenance and safe operation. Choose the Teknik Makina Turning Holder MTJNR 2020 for robust, repeatable turning performance — for personalised technical advice contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271) Technical data Designation: Turning Holder Brand: Teknik Makina SKU: D200TM For indexable inserts: TN-- 2204 ISO designation: MTJNR 2020 Designation 2: K22 Overall length: 125 mm Weight: 0.429 kg Shank width: 20 mm Shank height: 20 mm Cutting head width: 25 mm Cutting height: 40 mm Cutting angle: 93° Cutting direction: right GTIN: 4061905151118 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Turning Holder from Teknik Makina is compatible with TN-- 2204 indexable inserts, which are standardised carbide inserts suited for a variety of turning tasks; using the correct TN-- 2204 insert ensures secure clamping and optimal cutting performance. Can the Turning Holder MTJNR 2020 be used on manual lathes? Yes, the MTJNR 2020 Turning Holder is suitable for both machining centres and manual lathes; its 20×20 mm shank and 125 mm overall length support compact installations and stable performance in workshop environments. What cutting direction does the Teknik Makina Turning Holder support? The Teknik Makina Turning Holder is configured for right-hand cutting with a 93° cutting angle, providing predictable tool geometry for conventional right-hand turning operations. Who can I contact for technical questions about the Turning Holder? For detailed technical advice about the Turning Holder by Teknik Makina, METAV Werkzeuge offers expert consultation — reach out via info@metav-werkzeuge.com or call +49 2822 7131930 for personalised support. 93° MTJNR 2020 Turning Holder for TN-- 2204 Indexable Inserts, 125 mm - Teknik Makina

Turning Holder PCLNL 2020 — PCLN for CNMG Indexable Inserts from Teknik Makina The Turning Holder PCLNL 2020 is a left-hand Turning Holder engineered for CNMG 1204 Indexable Inserts, delivering stable performance for turning operations at a 95° cutting angle. Compatible with CNMG 1204 Indexable Inserts 125 mm Overall Length for versatile reach Integrated Internal Cooling for improved Tool Life 95° Cutting Angle for precise Left-hand Cutting Compact 20 × 20 mm Shank for stable clamping Robust clamp design for reliable chip-cutting performance The PCLNL 2020 Turning Holder combines a solid Clamp Mechanism with a compact Shank to provide consistent Cutting results. Its construction focuses on dimensional stability and repeatability, so toolpaths remain accurate even under intermittent cuts. The integrated Internal Cooling supports Temperature Control at the cutting zone and helps prolong Insert Life by evacuating heat and chips more effectively. Precision geometry that simplifies setup and machining A defined 95° Cutting Angle and a dedicated seat for CNMG 1204 Inserts reduce alignment iterations and make insert changes straightforward. This geometry offers predictable cutting forces and improves surface finish with minimal manual adjustment. For operators seeking efficient setup, the holder’s ISO designation PCLNL 2020 and standardized mounting dimensions help integrate it into existing tool systems with little modification. Built for workshops that demand compact yet powerful tooling With a 125 mm Overall Length and a 20 mm Shank profile, the holder suits compact lathes and toolposts where space is limited but machining demands remain high. The compact dimensions combine with a sturdy clamping screw and lever design to ensure the Insert remains secure during heavy cuts. This balance of Size and Stability supports consistent cycle times and dependable part quality. Clear compatibility and simple maintenance for production use Designed specifically for CNMG 1204 Indexable Inserts, the holder accepts standard Insert types and common clamping hardware (Klemmschraube TH821, Kniehebel TL4). Routine maintenance is straightforward: access to the clamping screw and lever is direct, and the presence of Internal Cooling reduces residue buildup at the Insert seat, lowering the frequency of cleaning and adjustment. We recommend choosing the Teknik Makina Turning Holder PCLNL 2020 for demanding turning tasks—contact METAV Werkzeuge for expert guidance and tailored advice: eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Technical Data Designation: Klemmhalter (Turning Holder) Brand: Teknik Makina SKU: AP140TM Compatible Inserts: CNMG 1204 Suitable For Inserts: CNMG 1204 Overall Length: 125 mm Weight: 0.428 kg Allen Key: 3 Allen Internal Cooling: Yes ISO Designation: PCLNL 2020 Secondary Designation: K12-IKG1/8 Width: 20 mm Height: 20 mm Cutting Head Width: 25 mm Clamp Screw: TH821 Knee Lever: TL4 Pin: TS-4 Cutting Height: 28 mm Cutting Direction: Left Cutting Angle: 95° Tool Plate: TA016-1 GTIN: 4061905150319 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Klemmhalter (Turning Holder) from Teknik Makina? The Klemmhalter (Turning Holder) by Teknik Makina is designed for CNMG 1204 Indexable Inserts; using these Inserts ensures correct seat contact and expected cutting geometry for optimal performance. Does the Klemmhalter include internal cooling and how does it help? Yes, the Klemmhalter (Turning Holder) from Teknik Makina features Internal Cooling; this reduces heat at the cutting edge and helps extend Insert Life while improving chip evacuation during continuous machining. Is the PCLNL 2020 suitable for small lathes and compact setups? The PCLNL 2020 Turning Holder by Teknik Makina has a 125 mm Overall Length and a 20 × 20 mm Shank, making the holder well suited for compact machines where stable clamping and limited space are important. Who can help if I need technical advice about the Klemmhalter? If additional technical data or application advice is required for the Klemmhalter (Turning Holder) from Teknik Makina, METAV Werkzeuge offers comprehensive consultation—contact info@metav-werkzeuge.com or call +49 2822 7131930 for support. 125mm PCLNL 2020 Turning Holder for CNMG 1204 Indexable Inserts, 95° Cutting Angle, Left, Internal Coolant - Teknik Makina

Turning Holder (Klemmhalter) by Teknik Makina The Turning Holder (Klemmhalter) PCLN for CNMG indexable inserts is a right-hand clamping tool engineered for precise external turning on CNC lathes and conventional machines. PCLNR 2020 ISO toolholder Compatible with CNMG 1204 Inserts 125 mm Overall Length for versatile reach Internal Coolant for improved chip control 95° Cutting Angle for stable engagement Precision and Rigidity for Consistent Results The PCLNR 2020-style Turning Holder combines a rigid Geometry with a 95° Cutting Angle to ensure stable engagement of CNMG inserts and repeatable machining performance. Because the toolholder is designed for right-hand cutting and accepts CNMG 1204 indexable inserts, setup is straightforward and tool changes are fast. This direct compatibility reduces downtime and supports consistent surface finish in serial production and single-part jobs. Controlled Cooling to Extend Tool Life Equipped with Internal Coolant, the clamping holder channels fluid directly to the cutting zone, improving chip evacuation and heat management. Improved cooling reduces insert wear and helps maintain dimensional accuracy during longer cuts. For workshops aiming to maximise Insert Life and minimise rework, this feature delivers a measurable increase in process reliability without complex retrofits. Compact Dimensions for Flexible Machining With an overall length of 125 mm and a shank cross-section of 20 × 20 mm, the toolholder offers a compact footprint that suits tight setups while preserving leverage for effective turning. The Cutting Head Width of 25 mm and a Cutting Height of 28 mm ensure correct insert seating and stable clamping. Standard fastening components such as the TH821 clamping screw and TL4 lever simplify maintenance and spare-part logistics in busy shops. Built for Professional Workshops and Job Shops This Turning Holder is aimed at machinists, maintenance departments and job shops that require reliable, repeatable external turning with CNMG indexable inserts. By combining standard ISO designation PCLNR 2020 with common clamping parts and internal coolant, the holder reduces setup complexity and supports efficient machining cycles. METAV Werkzeuge provides technical advice for complex applications to help integrate the toolholder into existing processes. Strong recommendation: Select the Teknik Makina Turning Holder with Internal Coolant for improved turning accuracy and longer insert life — for personalised application support contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. Bezeichnung: Turning Holder (Klemmhalter) Marke: Teknik Makina SKU: AP130TM For Indexable Inserts: CNMG 1204 Compatible Inserts: CNMG 1204 Overall Length: 125 mm Weight: 0.428 kg Allen Key: 3 Allen Internal Coolant: Yes ISO Designation: PCLNR 2020 Alternative Designation: K12-IKG1/8 Width: 20 mm Height: 20 mm Cutting Head Width: 25 mm Clamping Screw: TH821 Lever: TL4 Pin: TS-4 Cutting Height: 28 mm Cutting Direction: Right Cutting Angle: 95° Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder (Klemmhalter) from Teknik Makina? The Turning Holder (Klemmhalter) by Teknik Makina is designed to accept CNMG 1204 indexable inserts, ensuring secure seating and compatibility with standard CNMG geometries. Does the Teknik Makina Turning Holder include internal coolant? Yes, the Teknik Makina Turning Holder (Klemmhalter) features Internal Coolant, which directs coolant to the cutting zone to assist chip evacuation and reduce insert wear. What are the main dimensions of the Turning Holder from Teknik Makina? The Turning Holder (Klemmhalter) from Teknik Makina has an overall length of 125 mm, a shank size of 20 × 20 mm and a cutting head width of 25 mm, offering a compact yet robust solution for various turning setups. Is the Teknik Makina Turning Holder suitable for right-hand turning only? The Turning Holder (Klemmhalter) by Teknik Makina is configured for right-hand cutting; for other orientations consult METAV Werkzeuge to verify suitability for your application. Who can provide technical support for the Teknik Makina Turning Holder? For application advice or further technical data on the Turning Holder (Klemmhalter) from Teknik Makina, METAV Werkzeuge offers competent support — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271. 125mm PCLN Turning Holder for CNMG 1204 Indexable Inserts, Internal Coolant, PCLNR 2020 - Teknik Makina

Turning Holder PCLNL 2020 for CNMG 1204 Indexable Inserts by Teknik Makina The Turning Holder PCLNL 2020 is a left-hand tool holder designed for secure clamping of CNMG 1204 indexable inserts, suitable for precise turning operations in metalworking. Compatible with CNMG 1204 insert geometry 125 mm overall length for extended reach PCLNL 2020 ISO designation for secure fit 95° cutting angle for stable left-hand cuts Engineered for consistently precise turning results The Turning Holder delivers predictable machining accuracy by combining a defined 95° cutting angle with a stable clamping interface for CNMG 1204 inserts. This results in consistent chip formation and repeatable cutting performance, reducing the need for frequent adjustments. For operators focused on dimensional accuracy, the tool holder's geometry supports fine finishing passes and reliable surface quality. Robust dimensions reduce vibration and improve tool life Designed with a 20 mm width and 20 mm height, and a 25 mm cutting-head width, the holder provides increased rigidity compared with narrower tool shanks. The 125 mm overall length enables access to deeper workpieces while maintaining stiffness that minimises chatter. These characteristics translate into longer insert Life and fewer regrinds, supporting uninterrupted production on demanding turning tasks. Compatibility and straightforward setup to save workshop time This PCLNL holder is specified for CNMG 1204 indexable inserts—an industry-standard insert format characterised by a 12 mm inscribed circle and reliable indexability. The ISO designation PCLNL 2020 indicates the holder style and cut direction, making selection and replacement straightforward for toolroom staff. For teams needing setup assistance or deeper technical data, Teknik Makina items are supported by METAV Werkzeuge’s expert service to ensure correct mounting and optimal cutting parameters. Practical benefits for production environments By using a dedicated left-hand holder, shops can standardise tool inventories for predictable left-hand turning operations, simplifying tool management and training. The precise seat and clamp interface reduce the risk of insert slippage under load, which protects both the Insert and the Workpiece. Backed by Teknik Makina’s manufacturing tolerances, this holder is aimed at professionals seeking consistent performance across batches and shifts. Strong recommendation: Choose the Teknik Makina Turning Holder PCLNL 2020 for reliable left-hand finishing operations and contact METAV Werkzeuge for tailored technical support at info@metav-werkzeuge.com or +49 2822 7131930, WhatsApp +49 170 2837271 Technical Specifications for Workshop Planning Bezeichnung: Turning Holder Brand / Hersteller: Teknik Makina SKU: P140TM Compatible Inserts: CNMG 1204 ISO Designation: PCLNL 2020 Secondary Designation: K12 Overall Length: 125 mm Shank Width: 20 mm Shank Height: 20 mm Cutting Head Width: 25 mm Cutting Direction: Left Cutting Angle: 95° Weight: 0.421 kg GTIN: 4061905149863 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Which inserts fit the Turning Holder PCLNL 2020 by Teknik Makina? The Turning Holder PCLNL 2020 from Teknik Makina is designed to accept CNMG 1204 indexable inserts; this holder provides the correct seat and clamp geometry to secure those inserts for left-hand turning. Is the Teknik Makina Turning Holder suitable for deep-reach turning? Yes, the Teknik Makina Turning Holder with a 125 mm overall length offers extended reach for deeper operations while maintaining rigidity suitable for finishing and semi-finishing cuts. How do I ensure correct mounting of the PCLNL 2020 Turning Holder? When installing the Teknik Makina Turning Holder PCLNL 2020, ensure the CNMG 1204 insert sits flush in the pocket and the clamp screw is torqued to the manufacturer’s recommendation; for further guidance, METAV Werkzeuge provides expert advice and setup support. Can I get technical assistance or spare parts for this Turning Holder from METAV Werkzeuge? METAV Werkzeuge supports Teknik Makina Turning Holder customers with consultation, setup help and spare-part sourcing—contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised assistance. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#P140TM","sku":"P140TM","mpn":"PCLNL 2020","gtin13":"4061905149863","name":"125mm PCLN for CNMG Indexable Inserts, 95° Left Cut - Teknik Makina","description":"Turning holder for CNMG 1204 indexable inserts, 125 mm overall length, 95° cut angle, left cutting direction, robust 20×20 mm shank.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/07/8d/e2/62/62e28d07530023baaa126af2/p136tm-main.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"Type","value":"PCLN"},{"@type":"PropertyValue","name":"Compatible Inserts","value":"CNMG 1204"},{"@type":"PropertyValue","name":"Overall Length","value":"125 mm"},{"@type":"PropertyValue","name":"Shank Width","value":"20 mm"},{"@type":"PropertyValue","name":"Shank Height","value":"20 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"25 mm"},{"@type":"PropertyValue","name":"Cutting Angle","value":"95°"},{"@type":"PropertyValue","name":"Cutting Direction","value":"left"},{"@type":"PropertyValue","name":"Weight","value":"0.421 kg"},{"@type":"PropertyValue","name":"ISO Designation","value":"PCLNL 2020"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What inserts does this holder accept?","acceptedAnswer":{"@type":"Answer","text":"Compatible with CNMG 1204 indexable inserts."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 125 mm."}},{"@type":"Question","name":"What is the cut angle and direction?","acceptedAnswer":{"@type":"Answer","text":"95° cut angle with left cutting direction."}},{"@type":"Question","name":"What are the shank dimensions?","acceptedAnswer":{"@type":"Answer","text":"Shank width and height are 20 mm each."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Manufacturer is Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder"},{"@type":"Thing","name":"PCLN Series"},{"@type":"Thing","name":"CNMG 1204 Compatibility"}],"mentions":[{"@type":"Thing","name":"PCLNL 2020 ISO Designation"},{"@type":"Thing","name":"95° Cut Angle"},{"@type":"Thing","name":"Teknik Makina Manufacturer"}]}]}