Planfräser für schnelle, plane Flächenbearbeitung
Planfräser sind speziell entwickelte Trägerwerkzeuge zum großflächigen Abtrag und exakten Planfräsen von Werkstücken und verbessern die Oberflächenqualität sowie die Prozessstabilität bei der Bearbeitung von Stahl, Guss und NE-Metallen; sie kommen sowohl in offener Ausführung ohne Innenkühlung als auch als innengekühlte Varianten zum Einsatz, wobei die innengekühlte Version durch gezielte Kühlmittelzufuhr thermische Überlastung verhindert und die Standzeit erhöht. Die Werkzeuge dienen dazu, große Schnittbreiten effizient zu bearbeiten und durch optimale Spanabfuhr eine gleichmäßige Oberfläche zu erzeugen, wobei die offene Ausführung einfache Fräsaufgaben mit externer Kühlung abdeckt. Planfräser bieten besonders bei schwer zerspanbaren, wärmeempfindlichen oder klebenden Werkstoffen Vorteile, weil die innengekühlte Bauform die Bildung von Aufbauschneiden reduziert und die Oberflächengüte verbessert.
63mm Face Milling Head for SNKX 1206 Indexable Inserts L44mm With Internal Coolant, 45° Cut Angle - Teknik Makina
Combining a compact 63 mm diameter with internal coolant and a six cutting edges arrangement, the milling head delivers stable face milling with reduced overhang and consistent surface quality. Order the T322-1TM face milling head directly via Metav Werkzeuge or consult Metav’s technical advisers for application-specific guidance. Face milling head T322-1TM — 63 mm diameter, internal coolant by Teknik Makina The face milling head T322-1TM is a compact, internally cooled milling head designed for face milling with SNKX 1206 indexable inserts, optimised for applications requiring short overhangs and high process stability. Compact 63 mm milling head with internal coolant Compatible with SNKX 1206 indexable inserts Six cutting edges for stable face milling Short 44 mm overall length for reduced overhang Precision and process stability for productive face milling The compact design focuses on repeatable results: a 63 mm cutter body paired with six cutting edges provides a balance between material removal and vibration damping, improving finish quality during face milling operations. The 45° cutting angle reduces cutting forces perpendicular to the spindle axis, which stabilises the machining process and lowers the risk of chatter. With a rated maximum cutting diameter of 76 mm, the head is suitable for a wide range of face-milling passes while maintaining consistent dimensional control and tool life. Integrated cooling and insert compatibility that extend tool life Built-in internal coolant channels direct cutting fluid to the insert pockets and cutting zone, aiding chip evacuation and reducing thermal loading at the edge. This feature enhances insert performance and longevity when used with SNKX 1206 indexable inserts (compatible with Korloy), allowing stable cutting temperatures and cleaner chips. The result is fewer insert changes and longer uninterrupted cycles, supporting higher overall equipment effectiveness in production environments. Fast, secure mounting and compact overhang for reliable setups The head’s short 44 mm overall length reduces lever effects at the spindle, improving rigidity for demanding cycles. Fast, positive clamping is achieved with M4 x 12.5 Torx screws tightened using a T15 key, ensuring secure seat retention and repeatable assembly. The tool’s mass (approx. 0.71 kg) and compact footprint contribute to lower spindle load and easier handling during tool changes, which is useful in high-mix or low-run scenarios where quick set-up and consistent mounting are essential. For reliable face milling with integrated coolant, contact Metav Werkzeuge for the T322-1TM by Teknik Makina — Metav’s advisers can assist with application matching and technical data at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: T322-1TM Manufacturer: Teknik Makina Product type: Face milling head Compatible inserts: SNKX 1206 (Korloy) Internal coolant: Yes Core measurements Diameter: 63 mm Maximum cutting diameter: 76 mm Overall length: 44 mm Number of cutting edges: 6 Cutting angle: 45° Weight: 0.71 kg Screw size: M4 x 12.5 Torx key: T15 Special features Internal coolant Short overhang design Compatibility with Korloy SNKX 1206 inserts Robust clamping with Torx M4 screws FAQ Is this head compatible with SNKX 1206 indexable inserts? Yes. The T322-1TM face milling head is specifically designed for use with SNKX 1206 indexable inserts and fits Korloy-manufactured versions. Does the tool feature internal coolant? Yes. The milling head includes internal coolant channels that direct cutting fluid to the cutting zone to aid chip evacuation and reduce tool edge temperature. What is the maximum cutting diameter for this face milling head? The tool supports a maximum cutting diameter of 76 mm, enabling a variety of face milling passes while keeping a compact cutter body. Which fasteners and key are required for mounting? Mounting uses M4 x 12.5 Torx screws tightened with a T15 key for secure and repeatable clamping. Is the head suitable for applications with limited overhang? Yes. The 44 mm overall length and compact mass improve rigidity and are beneficial where short overhangs and high stability are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Face Milling Head for SNMU 1305 Indexable Inserts 6‑Cutters, Internal Coolant, 45° Cut Angle - Teknik Makina
Take advantage of the combination of 63 mm cutting diameter, internal coolant and compatibility with SNMU 1305 indexable inserts for consistent facing performance and reduced tool change times; order the T235-1TM directly via Metav Werkzeuge or consult the specialists for integration advice. Face milling head T235-1TM – 63 mm diameter, internal coolant, Teknik Makina Face milling head T235-1TM designed for SNMU 1305 indexable inserts, engineered for efficient facing operations and reliable coolant delivery to the cutting edge 63 mm cutting diameter Internal coolant supply Compatible with SNMU 1305 inserts (ISCAR) Six cutting edges, 45° cutting angle High-performance facing for predictable cycle times This milling tool is engineered to deliver consistent metal removal rates by combining a 63 mm nominal diameter with a 45° cutting angle and a robust body. The geometry supports stable chip formation and smoother surface finishes, while the six cutting edges reduce the frequency of insert changes and increase productive cutting time. The result is measurable efficiency gains on medium‑duty facing operations and a predictable output for batch production. Reliable coolant feed for extended insert life Built with internal coolant, the cutter head channels cutting fluid directly to the insert rake face, improving chip evacuation and thermal control. This targeted cooling reduces flank and crater wear on the indexable inserts, particularly when using SNMU 1305 grades from ISCAR, and contributes to longer insert life and fewer unplanned stops. The integrated coolant routing is especially beneficial where tight tolerances and consistent surface quality are required. Practical design for quick maintenance and secure assembly The tool accepts standard M5x12 Torx screws (Torx T20), enabling secure, repeatable clamping and rapid insert replacement with commonly available tools. The compact L 44 mm overall length and a mass of approximately 0.645 kg make handling straightforward during set-up and changeover. Practical features such as standard fasteners and a familiar insert seat simplify workshop routines and reduce the learning curve for fitters and operators. Engineered compatibility and application clarity Compatible with SNMU 1305 indexable inserts, the cutter head is suited to facing and light shoulder milling where a 63 mm cutter is appropriate. The maximum recommended cutting diameter of 76 mm allows for flexible application planning. Technical data such as the 45° approach angle and the six-edged configuration should be considered when programming feed and speed to achieve optimal tool life and surface finish; consult material-specific recommendations for best results. For specification checks, availability and advice on integrating the T235-1TM face milling head into production, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange a technical discussion. Technical data SKU: T235-1TM eClass: 21181015 Label: 63mm Planmesserkopf SNMU 1305 L44mm mit Innenkühlung Facts Diameter: 63 mm Overall length: 44 mm Weight: 0.645 kg Max cutting diameter: 76 mm Cutting angle: 45° Number of cutting edges: 6 Special features Internal coolant Compatible with SNMU 1305 indexable inserts Compatible insert manufacturer: ISCAR Torx screw: M5x12 Torx key: T20 Product type: Face milling head Manufacturer: Teknik Makina FAQ Which inserts fit this face milling head? The face milling head accepts SNMU 1305 indexable inserts; it is compatible with inserts from ISCAR and other manufacturers offering the same insert designation. Is internal coolant supplied to the cutting edge? Yes, the T235-1TM is equipped with internal coolant routing to deliver coolant directly to the insert cutting zone, improving cooling and chip control. What is the recommended cutting angle and how does it affect performance? The tool features a 45° cutting angle, which balances shear and radial forces to provide good surface finish and stable cutting on facing operations. How many cutting edges are available per tool body? The cutter head is configured for six cutting edges, permitting multiple indexings before a full insert change is required. Which fasteners are required for insert clamping? Insert clamping uses M5x12 Torx screws and a Torx T20 key for secure and repeatable fastening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
63mm Face Milling Head for SOET 13 Indexable Inserts L50mm With Internal Coolant, 5 Cutting Edges, 90° Approach - Teknik Makina
Take advantage of the combination of precise facing geometry, built‑in coolant delivery and broad insert compatibility to maintain high throughput and consistent surface quality. Order the suitable Teknik Makina face mill head directly via Metav Werkzeuge or request an application consultation from our specialists. Teknik Makina T635TM 63 mm face mill head with internal coolant A face mill head designed for high‑precision facing with SOET 13 indexable inserts, ideal for production machining and finishing. 63 mm diameter for efficient facing Internal coolant for improved tool life Compatible with SOET 13 indexable inserts Robust design with five cutting edges Precision and productivity for facing operations The face mill head has been engineered to deliver predictable material removal and repeatable results. Its 63 mm diameter and 90° cutting angle provide a flat, true surface with each pass, reducing downstream finishing. The combination of a compact overall length and five cutting edges enables steady chip load distribution, which translates into stable cutting forces and improved cycle times. For batch production or single‑piece finishing, this geometry supports a measurable uplift in productivity and workpiece consistency. Stable cooling and straightforward maintenance Built‑in internal coolant channels direct cutting fluid to the insert pockets, which reduces thermal load on the cutting edges and helps maintain edge geometry for longer. This internal feed system also cuts the risk of built‑up edge and improves tool life under continuous operation, meaning fewer stoppages for insert changes. Maintenance is simplified by standard fastenings: Torx T15 engagement and M3.5x8.5 screws allow rapid removal and secure clamping without specialised adapters, keeping downtime to a minimum. Wide insert compatibility for flexible setups Compatibility with SOET 13 indexable inserts—and suitability for inserts from Palbit—gives machine shops flexibility when specifying grades for steel, alloy or cast components. The cutter head accepts industry‑standard indexable inserts, permitting quick tool reconditioning and easy selection of coatings or geometries tailored to specific materials or finishes. This adaptability reduces tool inventory complexity while preserving the option to choose high‑performance grades when required. Confident finishes and reliable repeatability A straightforward clamping concept combined with optimised insert seating ensures consistent runout control and repeatable surface quality. The head’s balanced design and controlled chip flow help to avoid chatter and produce cleaner surfaces, particularly on contoured or large planar faces. For applications where finish and dimensional adherence matter, the T635TM supports reliable outcomes that ease downstream processing and inspection. For tailored machining advice or to specify the Teknik Makina T635TM face mill head with internal coolant for an upcoming job, contact Metav Werkzeuge for quick application support and parts supply. Technical data SKU: T635TM Product type: face mill head Brand: Teknik Makina Dimensions & core data Diameter: 63 mm Overall length: 50 mm Weight: 1.254 kg Cutting edges: 5 Cutting angle: 90° Materials & special features Internal coolant: yes Compatible inserts: SOET 13 indexable inserts Compatible insert manufacturer: Palbit Torx key: T15 Torx screw: M3.5x8.5 FAQ Which insert type does this cutter accept? The T635TM is designed for SOET 13 indexable inserts, and it is compatible with inserts from Palbit for flexible grade selection. Is there internal coolant provision for improved tool life? Yes, the face mill head features internal coolant delivery to the insert pockets to reduce thermal stress and extend cutting edge life. What is the diameter and typical application area? With a 63 mm diameter, the cutter is suited to efficient facing and planar finishing in general machining and production environments. How many cutting edges are mounted and what is the cutting angle? The head is equipped with five cutting edges and provides a 90° cutting angle for true facing and reliable surface quality. What fastening tools are required for insert changes? Insert clamping and screw removal use a Torx T15 key and M3.5x8.5 Torx screws for easy servicing. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Face Milling Head L40mm 5 Inserts Internal Coolant T20 Torx M5x12 - Teknik Makina
Take advantage of a compact solution that combines 63 mm diameter machining, internal coolant and a five-edge configuration for consistent face finishes; order the face milling head directly via Metav Werkzeuge or consult our specialists for integration advice. Face milling head T210-1TM — 63 mm diameter, internal coolant, Teknik Makina The Face milling head T210-1TM is a compact, indexable-cutter solution designed for precision face milling on milling machines and machining centres. 63 mm diameter for compact machining Internal coolant for reliable chip evacuation 5 cutting edges for balanced material removal High-efficiency cutting with compact geometry The compact design provides a 63 mm diameter and an overall length of 40 mm, enabling stable cutting close to the spindle and reducing overhang-related deflection. With a configuration of five cutting edges, the tool ensures a steady material removal rate and improved surface integrity, while the 43° cutting angle promotes smooth chip flow and lower cutting forces. These characteristics translate into shorter cycle times and consistent results on small to medium-sized face operations. Controlled cooling and predictable chip management An integrated internal coolant channel supplies lubricant directly to the cutting zone, improving tool life and temperature control during sustained face milling cycles. This internal delivery supports effective chip evacuation and reduces the risk of built-up edge formation, which helps maintain dimensional accuracy over longer runs. The result is a more reliable finishing process and reduced need for unscheduled tool changes. Easy maintenance and secure clamping Fast and repeatable insert changes are supported by a Torx fastening system: Torx T20 for the key interface and M5x12 Torx screws for secure clamping. The specification enables straightforward maintenance with commonly available tooling, reducing downtime during scheduled insert replacement. The short overall length and robust fastening scheme also contribute to low vibration at the cutting edge, improving surface finish without complex setups. Built for a professional workshop environment Delivered as a purpose-built face milling solution from Teknik Makina, the head suits operations that require compact footprint tooling and consistent face finishes. The combination of balanced geometry, internal coolant and a multi-edge layout supports reliable series production and precise finishing passes. For purchasers seeking a dependable milling head and a single-source supply chain, Metav provides the distribution and technical backing to integrate this cutter head into workshop tooling assortments. Contact Metav Werkzeuge for tailored integration support and secure the Teknik Makina face milling head T210-1TM with internal coolant for precision finishing; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: T210-1TM Eclass: 21181015 Label: 63mm Planmesserkopf L40mm Manufacturer: Teknik Makina Dimensions & core data Diameter: 63 mm Overall length: 40 mm Cutting edges: 5 Cutting angle: 43° Features Internal coolant: Yes Torx key: T20 Torx screw: M5x12 Product type: Face milling head UID: T210-1TM FAQ What is the primary application of this milling head? The face milling head is intended for precision face milling operations on milling machines and machining centres, providing stable finishes with short overhangs. How does the internal coolant affect performance? Internal coolant delivers lubricant directly to the cutting zone, improving temperature control and chip evacuation for more consistent tool life and surface quality. Which fastening hardware is specified for insert clamping? Insert clamping uses Torx screws specified as M5x12 with a Torx key size of T20, as listed for the T210-1TM. Does the head support balanced cutting for finishing passes? Yes, the five cutting-edge arrangement and 43° cutting angle promote balanced material removal and improved surface finish during finishing passes. Who supplies and supports this tool in Europe? The T210-1TM is supplied via Metav Werkzeuge, which provides product distribution and technical support for workshop integration. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Face Milling Head SNMX 1206 L40mm Internal Coolant, 6 Inserts, T15/M4x12.5 - Teknik Makina
Efficient machining with a 63 mm diameter and internal coolant delivers stable metal removal and extended tool life; the compact 40 mm overall length and six indexable cutting edges reduce downtime and simplify insert changes. Purchase the face milling head directly via Metav Werkzeuge or contact our consultants for application advice. Face milling head T344-1TM — 63 mm, internal coolant (Teknik Makina) A face milling head designed for heavy-duty facing and finishing using SNMX 1206 indexable inserts, optimised for stable cuts and quick insert changes. 63 mm diameter for broad surface contact Internal coolant for edge cooling and chip control Six indexable cutting edges for longer uptime Compatible with Korloy SNMX 1206 inserts Consistent material removal and increased throughput The compact cutter body delivers a wide contact radius while maintaining a short overhang; the 63 mm diameter in combination with the 88° cutting geometry produces a flat, uniform surface in a single pass. By using six indexable edges, the design reduces the frequency of tool changes and raises effective cutting time per setup, which improves production throughput. The SNMX 1206 insert system is a common industrial standard and, when paired with the milling head, enables consistent chip formation and predictable tool wear—key factors for process stability and reproducible results. Cooling at the cutting edge for longer tool life Built-in internal coolant supplies lubricant and coolant directly to the cutting zone, lowering temperatures at the edge and improving chip evacuation. Cooling at point of contact reduces thermal softening and flank wear, which in turn extends insert life and lowers overall tooling costs. For operations that demand sustained feeds and reliable surface finish, this coolant-through design helps maintain cutting performance and reduces the risk of built-up edge, making the cutter a sensible choice for continuous production environments. Fast serviceability and secure clamping for minimal downtime The milling head uses M4x12.5 Torx screws and a T15 key for secure and repeatable clamping, ensuring quick insert indexing and consistent seating after each change. The modest 40 mm overall length and a mass of 0.574 kg contribute to good balance and reduced vibration, supporting stable cuts at common spindle speeds. Simple mechanical interfaces and widely available Torx hardware mean maintenance is straightforward in any well-equipped workshop, helping to keep machine uptime high and servicing intervals short. Practical compatibility and workshop integration Designed specifically for SNMX 1206 indexable inserts from Korloy, the head fits into existing tool programmes and inventory systems with minimal conversion effort. The SKU T344-1TM identifies the exact configuration for ordering and spare-part management. With a familiar insert format and conventional screw fixation, integration into production lines is straightforward: operators benefit from predictable tool performance, and purchasers benefit from easy stock management and replacement sourcing. For application-specific advice or rapid supply of the Teknik Makina face milling head, contact Metav Werkzeuge for guidance and ordering support — info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: T344-1TM Manufacturer: Teknik Makina Product: Face milling head (Planmesserkopf) Compatible inserts: SNMX 1206 Compatible insert manufacturer: Korloy Internal coolant: yes SKU / UID: T344-1TM eClass: 21181015 Facts Diameter: 63 mm Overall length: 40 mm Weight: 0.574 kg Number of cutting edges: 6 Cutting angle: 88° Special features Internal coolant feed Torx screw fixation M4x12.5 Torx key T15 Designed for SNMX 1206 indexable inserts Compact design for reduced overhang FAQ Which insert type fits this milling head? The face milling head accepts SNMX 1206 indexable inserts; Korloy-manufactured SNMX 1206 inserts are specified for optimal fit and performance with the T344-1TM. Is the tool coolant-through or external only? This cutter features internal coolant, delivering coolant directly to the cutting zone to support edge life and chip control. How many indexable edges are available per tool set? The head holds six indexable cutting edges, which increases uptime by allowing multiple indexed positions before a full insert replacement is required. What fastening hardware is required for insert mounting? Inserts are secured with M4x12.5 Torx screws using a T15 key, allowing secure and repeatable clamping during maintenance. What are the key dimensions for setup and balancing? Key dimensions: 63 mm diameter and 40 mm overall length; the weight is 0.574 kg, relevant for toolholder balancing and overhang calculations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Facing Cutter Head 45° For ONMU 0505 Indexable Inserts, 6 Cutting Edges, M5x12 Torx Screw - Teknik Makina
Efficient 45° cutting performance, a compact 22 mm shank and compatibility with ISCAR ONMU 0505 indexable inserts combine to make fast set-up and consistent face-milling results achievable on the shop floor; order the T794TM through Metav Werkzeuge or consult the specialists if further application details are required. Planing cutter head T794TM — 45° face-milling head for ONMU 0505 inserts by Teknik Makina the Planing cutter head T794TM is a compact 45° face-milling head designed for use with ONMU 0505 indexable inserts in industrial metalworking operations 45° cutting angle for smooth face milling Compatible with ISCAR ONMU 0505 indexable inserts 63 mm diameter with 6 cutting edges 22 mm tool shank, secured with M5x12 Torx screw Faster, more stable cutting through 45° geometry The oblique 45° cutting geometry reduces cutting forces and spreads engagement across multiple teeth, which promotes stable machining and calmer spindle behaviour. With 6 cutting edges distributed on a Ø 63 mm head, the tool supports continuous chip formation suited to face-milling applications. This geometry is particularly effective where even material removal and repeatable surface results are required, making the tool a rational choice for production environments that prioritise throughput and process reliability. Secure mounting and rapid insert changes for higher uptime Designed for ONMU 0505 indexable inserts, the head accepts standard insert formats and is retained with a M5x12 Torx screw, driven with a T20 key, enabling quick and repeatable insert changes. The 22 mm shank ensures a compact, rigid connection to the toolholder, reducing micro‑movement at the cutting edge and enhancing positional accuracy. These features shorten changeover times and simplify maintenance procedures without sacrificing milling stability. Compact dimensions that aid handling and balance At an overall length of 45 mm and a mass of 0.652 kg, the component is compact enough for tight setups while providing sufficient mass to contribute to cutting stability. The reduced overhang and balanced form factor help to limit vibration during operation, which supports consistent surface quality and predictable tool performance. Such dimensional characteristics assist in achieving reliable cycle times in routines where space and tool clearance are limited. Application fit and workshop integration Specifically aligned with industrial indexable-insert systems, the head is suitable for standard face-milling tasks where ONMU 0505 inserts are employed. Compatibility with ISCAR inserts simplifies procurement and inventory management for workshops already standardising on that insert family. The design emphasises practical workshop needs — easy insert retention, standard Torx fixing and a familiar shank size — facilitating integration into existing toolsets and fixtures while keeping process steps straightforward. For tailored advice on integrating the Teknik Makina T794TM into existing setups or for reliable supply from Metav Werkzeuge, please contact our advisors at Metav Werkzeuge in Emmerich; phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data SKU: T794TM Product: Planing cutter head for ONMU 0505 indexable inserts Manufacturer: Teknik Makina Facts Diameter: 63 mm Cutting angle: 45° Cutting edges: 6 Shank diameter: 22 mm Overall length: 45 mm Weight: 0.652 kg Special features Compatible inserts: ISCAR ONMU 0505 Torx screw: M5x12 Torx key size: T20 Brand: Teknik Makina FAQ Which insert type fits this cutter head? The cutter head is specified for ONMU 0505 indexable inserts and is compatible with ISCAR insert geometries of that designation. How is the insert secured in the head? The T794TM accepts inserts secured by a M5x12 Torx screw; a T20 Torx key is used for tightening and loosening. What is the shank diameter for mounting? The tool features a 22 mm shank diameter intended for conventional toolholder interfaces. What are the key dimensions to consider for machine setup? Relevant dimensions include a 63 mm head diameter, 45 mm overall length and a mass of 0.652 kg, which inform clearance and balance considerations. Which manufacturer produces this cutting head? The tool is manufactured by Teknik Makina and distributed under SKU T794TM for industrial face-milling applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Facing Cutter Head 45° For ONMX 0606 Indexable Inserts, 5 Cuts, M5x12 Torx - Teknik Makina
Take advantage of a robust combination of 45° cutting geometry and compatibility with ONMX 0606 indexable inserts for efficient face milling and predictable surface quality; order the face milling head directly via Metav Werkzeuge or consult our specialists for fitment advice. Face milling head T790TM — 45° face milling head for ONMX 0606 indexable inserts (Teknik Makina) Face milling head T790TM designed for precision face milling applications with ONMX 0606 indexable inserts, optimised for stable cutting at a 45° approach angle. 45° cutting angle for smooth milling 63 mm diameter for broad coverage Compatible with Korloy ONMX 0606 inserts Increase machining efficiency with 45° cutting geometry The 45° approach of this face milling head delivers a balance between chip thinning and surface finish, reducing cutting forces while maintaining material removal rates. With a 63 mm diameter and 5 cutting edges, the tool head spreads load across the insert set and helps to achieve a more consistent finish in fewer passes. For production environments, this geometry often translates into improved cycle times and less tool pressure on the spindle, supporting efficient, repeatable face milling operations. Secure clamping and straightforward insert handling for less downtime Designed with secure fastening in mind, the head uses an M5x12 Torx screw and requires a T20 key for insert clamping. The compact 22 mm shank ensures a precise fit in many conventional tool holders, while the measured mass of 0.657 kg contributes to predictable dynamic behaviour during cutting. These tangible mechanical details reduce guesswork at setup, simplify changeovers and help to maintain stable performance across batches. Designed for compatibility and workshop reliability This face milling head is specified for ONMX 0606 indexable inserts and listed as compatible with Korloy inserts, making it straightforward to source replacement cutting edges from common providers. The straightforward interface between holder and insert supports consistent seating and repeatable geometry, which benefits both workshop maintenance and in-house production planning. Combined with Metav’s role as a precision partner, customers gain access to a wide supply range and industrial expertise for reliable procurement. For tailored procurement and technical guidance on the Teknik Cutting Tools face milling head T790TM — including application matching and availability from Metav Werkzeuge in Emmerich — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T790TM SKU: T790TM Manufacturer: Teknik Cutting Tools / Teknik Makina Suitable for indexable inserts: ONMX 0606 (Korloy) Torx screw: M5x12 Torx key size: T20 Facts Diameter: 63 mm Cutting angle: 45° Cutting edges: 5 Overall length: 45 mm Shank diameter: 22 mm Weight: 0.657 kg Special features Compatibility with Korloy ONMX 0606 indexable inserts Secure clamping via M5x12 Torx screw Compact 22 mm shank for standard tool holders Five cutting edges for distributed cutting load FAQ Which indexable inserts fit this face milling head? The face milling head accepts ONMX 0606 indexable inserts and is listed as compatible with Korloy inserts. What is the cutting angle and how does it affect performance? The head uses a 45° cutting angle, which reduces cutting forces while supporting a fine, consistent surface finish for face milling operations. Which screw and key are required for insert clamping? Insert clamping is done with an M5x12 Torx screw; a T20 Torx key is required for tightening and removal. What are the main mounting and dimension details? Key dimensions include a 63 mm outer diameter, 45 mm overall length and a 22 mm shank for mounting; the assembly weighs 0.657 kg. Is machining suitability for specific materials specified? Material suitability is not specified in the provided product data; compatibility should be confirmed based on the chosen insert grade and machining parameters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Facing Cutter PNHX 1105 L40mm With Internal Coolant, 6-Edge, 60° Cutting Angle - Teknik Makina
Take advantage of the robust combination of compact design, secure insert clamping and internal coolant to keep surfacing cycles efficient and reliable. Order the face milling head directly via Metav Werkzeuge or consult our advisors for specification support. Planmesserkopf T677TM — 63 mm face milling head with internal coolant by Teknik Makina The Planmesserkopf for PNHX 1105 indexable inserts is a compact face milling head engineered for efficient surface machining and quick insert changes in production environments. 63 mm dia. for compact face milling Internal coolant for improved chip evacuation Holds 6 PNHX 1105 indexable inserts Torx T15 screws M4x10 for secure clamping High-efficiency surfacing with compact dimensions The face milling head delivers consistent material removal thanks to its 63 mm nominal diameter and a maximum cutting diameter of 72 mm, optimised for short overhangs and stable cutting conditions. The body accepts 6 cutting edges, enabling multiple index changes without removing the cutter body from the spindle. The 60° cutting angle reduces cutting forces on interrupted cuts, supporting more consistent feeds and longer insert life. These measurable parameters make the tool particularly suitable where process stability and repeatability are required. Secure clamping and quick maintenance for production Designed for PNHX 1105 indexable inserts, the milling head features robust clamping via Torx T15 drive screws (M4x10) to ensure reliable seating under cyclic loads. The insert layout minimises vibration and simplifies indexing, while the Torx fasteners provide reliable torque transfer for maintenance teams. Insert compatibility with Palbit variants allows selection of grades tailored to the workpiece material; the cutter body itself keeps handling straightforward and reduces downtime during routine insert replacement. Integrated coolant and application versatility The integrated internal coolant supply channels coolant directly to the cutting zone, improving chip evacuation and reducing thermal loads on the insert edge. This feature supports extended tool life and cleaner surface finishes when paired with appropriate insert grades. The compact L40 mm body and modest mass reduce spindle load, which benefits high-speed operations and helps maintain concentricity during heavier cuts. The combination of features supports a wide range of face milling tasks where secure clamping and effective cooling are decisive. For reliable performance and rapid tooling changes, contact Metav Werkzeuge in Emmerich to discuss Teknik Makina face milling heads with internal coolant and the best insert options for the intended application — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930. Product details SKU: T677TM Product type: Face milling head Manufacturer: Teknik Makina Compatible inserts: PNHX 1105 (Palbit) Key dimensions Diameter: 63 mm Max cutting diameter: 72 mm Total length: 40 mm Cutting angle: 60° Number of cutting edges: 6 Weight: 0.418 kg Torx screw: M4x10 Torx key: T15 Special features Internal coolant Compatible with PNHX 1105 indexable inserts Label: 63mm Planmesserkopf PNHX 1105 L40mm with internal coolant eClass: 21181015 FAQ Which inserts fit this milling head? The milling head accepts PNHX 1105 indexable inserts; insert grades from Palbit are compatible and should be selected according to the workpiece material. Is the coolant internal or external-fed? This cutter body features internal coolant, supplying coolant directly to the cutting zone to aid chip control and thermal management. What drive screws and key are required for clamping? Clamping uses M4x10 Torx screws with a T15 Torx key for secure and repeatable fastening. Can this tool be used for heavy stock removal? The compact design and 63 mm diameter are optimised for stable face milling; heavy stock removal may require larger or specialised cutter bodies depending on the application and insert grade. What information is needed to order spare screws or inserts? Provide the SKU T677TM, the insert designation PNHX 1105, and screw specification M4x10 to ensure correct spare parts are supplied. Manufacturer/Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Indexable Corner Cutter 90° For ADKT 1505 Inserts M4x10 Torx T15, 45mm Overall Length - Teknik Makina
Take advantage of a purpose-built 90° cutting head that combines secure Torx fastening, compatibility with ADKT 1505 indexable inserts and a compact 22 mm shank for stable mounting and repeatable results; order directly via Metav Werkzeuge or consult our specialists for application matching. Corner tool head T204TM – 90° cutting angle, for ADKT 1505 indexable inserts (Teknik Cutting Tools) The Corner tool head T204TM is a compact indexable-insert holder designed for precise 90° shoulder and corner machining with ADKT 1505 inserts in industrial turning and milling setups 90° cutting angle for shoulder machining Compatible with ADKT 1505 indexable inserts 22 mm shank diameter for secure mounting M4x10 Torx screw with T15 drive Consistent shoulder machining with indexable inserts The T204TM tool head delivers a 90° cutting angle and is optimised for shoulder and corner operations where perpendicular faces and repeatable dimensions matter. By accepting ADKT 1505 indexable inserts, the holder supports quick insert changes and reliable repositioning, which reduces downtime and maintains consistent cycle times. The combination of precise insert seating and rigid clamping ensures improved dimensional repeatability, lowering scrap rates and helping production hit tolerance windows more consistently. Secure clamping and compact geometry for reduced vibration A 22 mm shank and compact overall length of 45 mm create a well-balanced assembly that reduces overhang and vibration during heavy cuts. Fastening is achieved with an M4x10 Torx screw and T15 drive, providing a secure, repeatable clamp force that simplifies tool setting and maintenance. The holder’s compact 63 mm diameter profile and modest mass (0.565 kg) contribute to stability on the turret or arbor, improving surface finish and extending insert life under steady operational conditions. Compatibility and operational efficiency Designed for compatibility with ISCAR inserts and specified for ADKT 1505, the head supports multi-edge indexing—there are 6 cutting edges referenced—so inserts can be rotated to a fresh edge without changing the insert grade or geometry. This approach reduces inventory complexity and cuts consumable costs per component. Clear mechanical interfaces and standardised fastening mean the unit integrates smoothly into existing tool portfolios, enabling predictable cutting performance and faster job changeovers. Built for workshop reliability and supported supply The holder’s robust design focuses on dependable everyday use in production and job-shop environments. Backed by supply from Emmerich, Metav Werkzeuge emphasises steady availability and application advice to help match the component to specific machines and inserts. Technical documentation and measured dimensions allow fitment checks before installation, supporting a smoother commissioning process and reducing the risk of incorrect tooling choices. For specification checks, availability and tailored recommendations on the Teknik Cutting Tools Corner tool head T204TM, contact Metav Werkzeuge for expert advice and fast supply from Emmerich: info@metav-werkzeuge.com • +49 2822 7131930 Technical Data Article number: T204TM Manufacturer: Teknik Makina Product: Corner tool head for ADKT 1505 indexable inserts Compatible with: ISCAR inserts Torx screw: M4x10 Torx key size: T15 Facts Shank diameter: 22 mm Weight: 0.565 kg Diameter: 63 mm Overall length: 45 mm Cutting angle: 90° Cutting edges: 6 Special features For ADKT 1505 indexable inserts 90° cutting geometry Compact, balanced design Secure Torx fastening Suitable for shoulder machining FAQ Which inserts fit this tool head? The holder is specified for ADKT 1505 indexable inserts and is compatible with ISCAR-style inserts following that designation. What fastener is required to secure the insert? Fastening uses an M4x10 Torx screw with a T15 drive; the design provides repeatable clamp force for reliable seating. Will the tool head fit my turret with a 22 mm bore? The tool head has a 22 mm shank, designed for secure mounting where that shank diameter is supported. How does the design reduce vibration and improve finish? Compact geometry (63 mm diameter, 45 mm overall length) and a balanced mass (0.565 kg) minimise overhang and vibration, improving surface finish and insert life. Can inserts be indexed to extend service life? Yes. The assembly supports multi-edge indexing of the ADKT 1505 inserts, allowing rotation to fresh cutting edges and reducing consumable change frequency. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Indexable External Turning Head For R390-1806 Inserts, 90° Cutting Angle, M4x11 Torx Screw - Teknik Makina
Combine the 90° cutting angle, compatibility with R390-1806 indexable inserts and a secure 22 mm shank to achieve consistent corner turning and short setup times. Order the component directly via Metav Werkzeuge or request application advice from the consultancy team. Corner turning head — for R390-1806 indexable inserts, 90° cutting angle (Teknik Makina) Corner turning head designed for 90° turning operations with R390-1806 indexable inserts, suitable for mounting on toolholders with a 22 mm shank. 90° cutting geometry for accurate corner turning Compatible with R390-1806 indexable inserts 22 mm shank diameter for secure mounting Torx clamping with M4x11 screw (T15 key) Consistent geometry for precision turning The 90° cutting angle guarantees repeatable corner profiles, which reduces the need for secondary machining and supports tight dimensional tolerances. The holder accepts R390-1806 indexable inserts, a widely used insert form that simplifies inventory and tool management. By pairing standard insert geometry with a stable tool head, machining cycles benefit from predictable forces and improved part-to-part uniformity. Secure clamping and reduced setup time A dedicated clamping arrangement using a Torx M4x11 screw actuated with a T15 key provides reliable seat retention and straightforward insert changes. The 22 mm shank ensures firm engagement with standard toolposts or toolholders, lowering vibration and improving surface finish. Faster insert swaps and consistent seating translate into higher machine uptime and fewer regrinds. Compact design suited to diverse turning operations With a 63 mm diameter and a total length of 45 mm, the compact form factor balances rigidity and accessibility in tight tool zones. The head incorporates 5 cutting edges, offering extended utility before indexation or replacement is required. At 0.49 kg, the component is lightweight enough for agile tool assemblies while remaining robust for industrial turning applications. Built for workflow reliability and efficiency Engineered as a component for indexable-turning systems, this tool head supports workflow optimisation by reducing fixture changes and set-up variability. Compatibility with inserts from established suppliers such as Sandvik helps streamline procurement and ensure proven cutting performance. The overall design contributes to predictable tool life and fewer interruptions on the shop floor. For precise application matching and to integrate the Teknik Cutting Tools corner turning head (Teknik Makina, SKU T424TM) into an existing tooling setup, contact Metav Werkzeuge for tailored technical advice and ordering support. Technical data Article number: T424TM ECLASS: 21181015 Manufacturer: Teknik Makina Designation: Corner turning head Designation (EN): for R390-1806 Indexable Inserts Numbers / Core technical data Diameter: 63 mm Shank diameter: 22 mm Total length: 45 mm Weight: 0.49 kg Cutting angle: 90° Number of cutting edges: 5 Design & special features Compatible inserts: R390-1806 Compatible insert brand: Sandvik Torx screw: M4x11 Torx key: T15 Compact design for tight tool zones FAQ Is the corner turning head compatible with Sandvik inserts? The corner turning head (Teknik Makina, SKU T424TM) is compatible with R390-1806 indexable inserts and is listed as suitable for inserts from Sandvik. What shank size is required for mounting? Mounting requires a 22 mm shank interface; the tool head is intended for holders and posts that accept that diameter. Which fastening hardware is used to secure the insert? Insertion and clamping are achieved using a Torx M4x11 screw; a T15 Torx key is specified for tightening. How many cutting edges are available before indexation? The head is specified with 5 cutting edges, extending interval between indexation or replacement depending on cutting conditions. Is the form suitable for tight corner turning and finishing? Yes, the 90° geometry and compact 63 mm diameter make it appropriate for corner turning and finishing tasks where access and repeatable geometry are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Indexable Turning Head 90° For BDMT 11T3 Inserts, M2.5x5.5 Torx Screw - Teknik Makina
Take advantage of a compact, robust turning solution that combines a 90° cutting angle and compatibility with BDMT 11T3 indexable inserts for reliable chip control and repeatable results; order via Metav Werkzeuge or consult our specialists for application guidance. Eckmesserkopf T535TM — indexable corner turning head with 90° cutting angle (Teknik Makina) Eckmesserkopf T535TM is an indexable corner turning head designed for short-reach turning and facing tasks using BDMT 11T3 inserts, delivering precise corner geometry in small-batch and series production. 90° cutting angle for precise corner turning Compatible with BDMT 11T3 indexable inserts 22 mm holder diameter for standard toolposts Secured with Torx M2.5x5.5 and T8 key Consistent geometry for accurate corner finishes The T535TM head is built to maintain a stable 90° cutting angle, which ensures repeatable corner profiles and reduced rework. Fitted for BDMT 11T3 indexable inserts, the assembly keeps insert positioning constant so that process variation is minimised. The compact head diameter of 63 mm and an overall length of 40 mm make this tool ideal where reduced overhang is required; the shorter projection reduces vibration and supports higher surface quality. This results in measurable time savings on finishing operations and a more predictable throughput. Fast, secure clamping that speeds cycle times Tool changes and secure fixation are handled via a Torx M2.5x5.5 screw, tightened with a T8 key, providing positive clamping without complex adjustments. The standard 22 mm holder diameter ensures compatibility with many common toolposts and quick-change systems, allowing straightforward integration into existing setups. At a net weight of 0.527 kg, the head balances rigidity with manageable handling during set-up, supporting efficient changeovers and minimal downtime—advantages that translate directly into improved machine utilisation. Broad compatibility and predictable performance Engineered for use with Kyocera-specified inserts and labelled for BDMT 11T3, the head suits turning operations across a range of ferrous and non-ferrous applications when the correct insert grade is selected. The tool’s construction and indexing concept promote consistent chip formation and easier control of cutting forces, which supports longer insert life when paired with suitable cutting parameters. For manufacturers seeking predictable cycle times and repeatable part geometry, this compact turning head offers a practical combination of stability and serviceability. For application-specific advice or to secure supply of this Teknik Cutting Tools indexable corner turning head, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com — our consultants provide guidance on compatibility, delivery and stock levels. Technical Data Article number: T535TM Manufacturer: Teknik Makina Product: Indexable corner turning head for BDMT 11T3 inserts SKU: T535TM Facts Diameter: 63 mm Shank / holder diameter: 22 mm Overall length: 40 mm Weight: 0.527 kg Cutting angle: 90° Suitable for inserts: BDMT 11T3 Torx screw: M2.5x5.5 Torx key: T8 Special features Compatible with Kyocera BDMT 11T3 indexable inserts Compact design for reduced overhang Positive Torx clamping for secure fixation Suited to short-reach turning and facing operations FAQ What inserts fit this turning head? The turning head accepts BDMT 11T3 indexable inserts; compatibility with Kyocera-specified grades is indicated for optimal fit and performance. Is the clamping hardware standardised? Yes, the head uses a Torx M2.5x5.5 screw tightened with a T8 key for rapid and secure insert fixation. Which holder diameter is required? A toolpost or holder with a 22 mm shank/acceptance diameter is required for correct mounting and rigidity. What machining tasks suit this head best? The T535TM is designed for short-reach corner turning and facing where a 90° cutting angle and compact geometry improve surface finish and reduce vibration. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Indexable Turning Head 90° For BOMT 1304 Indexable Inserts, 6 Cutting Edges, 22mm Shank - Teknik Makina
Take advantage of a robust, precision-bodied solution that combines stable mounting and a true 90° cutting geometry for consistent square-shoulder turning; order directly via Metav Werkzeuge or consult the technical team for application support. Angled tool head T967TM — 90° cutting geometry, for BOMT 1304 indexable inserts (Teknik Cutting Tools) The Angled tool head T967TM is an angled indexable insert holder designed for secure mounting of BOMT 1304 inserts in square-shoulder turning and facing applications on compatible tool posts 90° cutting angle for square operations Ø63 mm head diameter for stability 22 mm shank mounting diameter Compatible with BOMT 1304 indexable inserts Higher process stability from a compact, rigid design The holder’s Ø63 mm head diameter and a compact overall length of 40 mm deliver a rigid contact area that reduces deflection in short overhang setups. This results in consistent chip formation and repeatable shoulder quality when machining interrupted cuts or shoulders. The component’s mass of 0.613 kg contributes to vibration damping without excessive inertia; such balance helps maintain cycle-time efficiency in high-mix turning operations while keeping toolpost loading predictable. Precise interface and secure clamping for indexable inserts A dedicated mounting bore of 22 mm ensures a standardised interface to tool posts and adaptors; the insert pocket is configured for BOMT 1304 indexable inserts from Ingersoll, providing stable seating and predictable rake orientation. The clamping uses a Torx screw M3.5x8.5 secured with a T10 key, which permits repeatable torque application and minimises insert seat wear. For operators who prefer defined fastening methods, this arrangement simplifies routine insert changes and reduces setup variability. Designed around a 90° cutting geometry for square-shoulder accuracy The fixed 90° cutting angle is a practical choice where square shoulders and perpendicular facing are required; the right-angle geometry supports fast approach paths and straightforward programming on CNC lathes. Explained for non-specialist buyers: a 90° tool head positions the insert so that the cut forms a true right angle to the workpiece axis, which simplifies gauging and reduces the need for secondary operations when producing shoulders, slots or precision faces. Built for compatibility and pragmatic workshop use Compatibility with established insert grades and the clear specification of mounting and fastening parts (screw and key type) makes integration into existing tool kits uncomplicated. The unit’s design is aimed at industrial workshops and jobbing shops that value reliability and predictable performance over unnecessary complexity. Technical buyers will appreciate the direct mapping between insert geometry, clamping hardware and mounting diameter, enabling straightforward inventory and quick change-out procedures for mixed-batch production. For procurement or application advice on Teknik Cutting Tools’ angled tool heads, contact Metav Werkzeuge to discuss the T967TM’s suitability for specific turning setups or to arrange supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T967TM Manufacturer: Teknik Makina ECLASS: 21181015 Name: Angled tool head (Eckmesserkopf) for BOMT 1304 indexable inserts Facts Head diameter: 63 mm Shank mounting diameter: 22 mm Overall length: 40 mm Weight: 0.613 kg Cutting angle: 90° Cutting edges: 6 Special features Compatible with BOMT 1304 indexable inserts Matching insert manufacturer: Ingersoll Fastening screw: M3.5x8.5 Torx Required Torx key: T10 FAQ What inserts fit this holder? The angled tool head accepts BOMT 1304 indexable inserts; the pocket and clamp geometry are set to match that insert form, as supplied under SKU T967TM. Which insert manufacturers are supported? The holder is specified for Ingersoll-type BOMT 1304 inserts; this ensures correct seating and rake orientation for typical turning tasks. What is the required mounting diameter for the tool post? A 22 mm shank mounting diameter is provided; this dimension is the primary reference for selecting a compatible tool post adaptor or turret seat. How is the insert secured and which key is needed? Insert clamping is done with a Torx screw M3.5x8.5; a T10 Torx key is used for tightening to the recommended torque range Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Indexable Turning Head 90° For XOMX 1204 Inserts, 6 Cutting Edges, 22mm Shank - Teknik Makina
Take advantage of the combination of reliable 90° geometry, a secure 22 mm shank and broad compatibility with XOMX 1204 indexable inserts to streamline turning operations. Order the tool directly via Metav Werkzeuge or request tailored advice from consultants to ensure optimal integration into existing tooling systems. Corner Turning Head — 90° indexable insert head, 22 mm shank (Teknik Makina) The Corner Turning Head is a right-angle tool head designed for machining with XOMX 1204 indexable inserts, offering robust support for precision turning and shoulder operations. 90° cutting angle for stable turning 22 mm shank for secure mounting Compatible with XOMX 1204 indexable inserts Torx screw M3.5x8.5 with T10 drive Improve process reliability with precise 90° geometry The 90° cutting angle of this corner tool head provides consistent contact between insert and workpiece, which reduces vibration and improves surface finish in right-angle cuts. Engineered for predictable engagement, the geometry supports repeatable cycles and helps to maintain tool life by distributing cutting forces evenly. For operations that rely on dimensional accuracy, the stable cutting interface translates into fewer set-up iterations and less rework. Fast integration into standard toolholders and quick insert change Designed with a 22 mm shank, the turning head fits common toolholder interfaces so that retrofitting is straightforward and downtimes are minimised. The indexable inserts of type XOMX 1204 are secured with a Torx M3.5x8.5 fastening and a T10 drive, enabling fast, secure clamping and quicker insert replacement. Clear mechanical fastening reduces preparation time on the shop floor and supports consistent clamping torque for repeat performance across shifts. Compact dimensions and proven compatibility for workshop efficiency With a nominal 63 mm diameter, an overall length of 40 mm and a mass of 0.618 kg, the tool head balances rigidity and compactness for confined setups. Fitted for six cutting positions, the design helps to extend available cutting life between indexings. Compatibility with SECO-manufactured inserts ensures access to widely available tooling grades, easing inventory management and enabling selection of grades optimised for the application at hand. Contact Metav Werkzeuge for specification guidance or compatibility checks on this Teknik Makina Corner Turning Head T514TM — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss integration into existing tooling systems Technical Data Article number: T514TM Product name: Eckmesserkopf / Corner turning head Manufacturer: Teknik Makina Numeric Data Shank diameter (mm): 22 Overall length (mm): 40 Diameter (mm): 63 Weight (kg): 0.618 Cutting angle (°): 90 Cutting edges: 6 Torx screw: M3.5x8.5 Special features Compatible with XOMX 1204 indexable inserts Suitable for SECO insert standards Torx drive: T10 Right-angle tool head for turning operations FAQ What inserts fit this corner tool head? The corner tool head accepts XOMX 1204 indexable inserts and is compatible with SECO-style insert geometries as specified for the T514TM tool. Is the shank size suitable for standard holders? With a 22 mm shank diameter, the head is intended for standard toolholder interfaces that accept a 22 mm mounting diameter. Which screw and driver secure the insert? Inserts are secured using a Torx M3.5x8.5 screw with a T10 drive, providing a secure and repeatable clamp. How does the 90° geometry affect machining results? The 90° cutting angle offers stable engagement for shoulder and right-angle turning, reducing vibration and improving dimensional consistency in finished parts. What are the physical dimensions and mass of the head? The head measures 63 mm in diameter, has an overall length of 40 mm and weighs 0.618 kg, offering a compact and rigid solution for tight setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Indexable Turning Head for ADMT 1606 Indexable Inserts 90° Cutting Angle, M4x10 Torx T15 - Teknik Makina
Take advantage of a compact 22 mm shank and a stable 63 mm head diameter to secure precise turning and profiling with ADMT 1606 indexable inserts; order the corner tool head directly via Metav Werkzeuge or consult the specialists for application advice. Corner tool head T354TM — for ADMT 1606 indexable inserts, 22 mm shank The Corner tool head T354TM is a 90° turning and profiling head designed to hold ADMT 1606 indexable inserts for reliable machining of shoulders and corners in industrial turning applications. Compact 22 mm shank for reduced vibration Compatible with Walter ADMT 1606 inserts Secured with M4x10 Torx screw T15 63 mm head diameter with 90° cutting angle Increased process stability through a compact design The T354TM tool head pairs a 22 mm shank with a 63 mm diameter head to deliver improved rigidity and reduced chatter compared with longer, slimmer holders. This compact construction contributes to repeatable tool positioning and consistent surface finish, which is particularly valuable in batch production and short-cycle environments. The head accepts ADMT 1606 indexable inserts, a common standard in many workshops, enabling rapid insert changes and minimised downtime. Simple, secure clamping for consistent performance Clamping of the insert is achieved via an M4x10 Torx screw driven with a T15 key, providing a secure and straightforward fastening method familiar to machinists. The robust screw fixation supports reliable seat contact and preserves insert geometry under load, which translates into predictable tool life and fewer interruptions for re‑setting. Given the tool head’s mass of 0.578 kg, the assembly offers stable cutting behaviour without excessive inertia, helping to maintain toolpath accuracy and surface integrity. Practical integration and application benefits Designed specifically for ADMT 1606 inserts and marked by a 90° cutting angle, the holder is suited to corner turning, profiling and shoulder operations where accurate right‑angled geometry is required. Compatibility with inserts from established manufacturers such as Walter simplifies procurement and tool inventory. The combination of a standardised insert interface and a compact shank enables easy retrofitting into existing toolposts and modular tool systems, supporting efficient changeovers and reduced setup times on CNC lathes or turret heads. Contact Metav Werkzeuge for tailored application advice and ordering of the Teknik Makina T354TM corner tool head to ensure correct fitment and optimal machining performance Technical Data Article number: T354TM Manufacturer: Teknik Makina Model designation: Corner tool head T354TM For inserts: ADMT 1606 (indexable inserts) Shank diameter: 22 mm Weight: 0.578 kg Head diameter: 63 mm Overall length: 45 mm Number of cutting edges: 6 Cutting angle: 90° Compatible insert manufacturer: Walter Torx screw: M4x10 Torx key size: T15 Intended use: turning and profiling with ADMT 1606 inserts Brand: Teknik Makina FAQ What inserts fit this tool head? The corner tool head T354TM is designed for ADMT 1606 indexable inserts; inserts from Walter that conform to the ADMT 1606 form are compatible with the Teknik Makina holder. How is the insert secured in the holder? Insert clamping for the T354TM is by an M4x10 Torx screw, tightened with a T15 key to ensure a secure and repeatable seat. Which shank diameter is required for mounting? The tool head uses a 22 mm shank (Aufnahme 22 mm), enabling installation in toolposts and carriers that accept a 22 mm shank size. What operations is the holder best suited for? With a 90° cutting angle and a compact head, the T354TM is ideal for corner turning, profiling and shoulder machining where precise right‑angled features are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
63mm Indexable Turning Head for ANMX 1607 Inserts, 90° Cutting Angle, 5 Inserts, 22mm Shank - Teknik Makina
Compact, precision-focused performance combines with secure fastening and straightforward compatibility: the head’s 90° cutting angle, compatibility with ANMX 1607 indexable inserts and a 22 mm shank offer reliable corner turning and easy integration into standard toolholders. Order the component directly via Metav Werkzeuge or consult our advisors for application guidance. Corner turning head T172TM — for ANMX 1607 indexable inserts, 90° cutting angle (Teknik Makina) A robust Corner turning head T172TM engineered for external turning and shoulder machining on CNC lathes, designed to accept ANMX 1607 indexable inserts and fit common 22 mm toolholder interfaces 90° cutting angle for precise corner cuts Compatible with ANMX 1607 indexable inserts 22 mm shank diameter for standard toolholders Torx M4.5x11 fastening, T15 key required Consistent corner quality with a proven geometry The tool head delivers a stable 90° cutting angle that simplifies shoulder and groove creation while reducing setup complexity. Its geometry is optimised for repeatable contact between insert and workpiece, which helps to maintain dimensional tolerances across batch production. The integrated interface for ANMX 1607 indexable inserts ensures quick index changes and predictable cutting behaviour, reducing the need for constant fine adjustment and supporting a smoother production flow. Secure clamping and straightforward integration Fastening with a Torx M4.5x11 screw and the corresponding T15 key provides a compact, reliable clamping method that minimises insert movement under load. The 22 mm shank is compatible with many standard holders, so the head integrates easily into existing tool posts and turret systems. As a consequence, retrofitting is quick and the downtime linked to tool changeover is reduced, supporting higher machine utilisation rates in series and jobbing environments. Practical shop-floor benefits and maintenance advantages Weighing 0.462 kg and measuring 40 mm overall, the head is compact without sacrificing rigidity; this balance supports stable cut conditions while remaining easy to handle during tool changes. The design accommodates five cutting edges, which spreads wear and contributes to longer service intervals for the tooling system. Reduced handling time and predictable maintenance cycles translate into lower operational interruption and clearer scheduling for production managers. Designed for efficiency in metalcutting workflows With a 63 mm diameter and a configuration tailored for external turning, the head helps to shorten set-up times and maintain surface finish quality in mixed-production settings. The product supports focused productivity improvements—by pairing a reliable holder with established ANMX 1607 inserts, cutting data can be standardised across similar operations. This rational approach to tooling selection prioritises throughput and process stability for workshops aiming to reduce variability. Secure production with Teknik Makina quality and Metav Werkzeuge supply — order via Metav Werkzeuge for fast availability and application advice tailored to the machining task. Technical Data Article number: T172TM Manufacturer: Teknik Makina Data Diameter: 63 mm Total length: 40 mm Shank diameter: 22 mm Weight: 0.462 kg Cutting angle: 90° Cutting edges: 5 Special features Compatible with ANMX 1607 indexable inserts Torx screw M4.5x11 Torx key T15 required Brand: Teknik Makina eClass: 21181015 FAQ What inserts fit this corner tool head? The head is designed for ANMX 1607 indexable inserts, ensuring direct compatibility and predictable cutting performance with that insert type. Which shank size is required for mounting the head? The head uses a 22 mm shank, suitable for standard toolholders and turret interfaces that accept that diameter. How is the insert secured to the turning head? Insert clamping is achieved via a Torx M4.5x11 screw; a T15 key is required for secure fastening and repeatable torque. Is the head suitable for high-volume production work? With a rigid geometry, standardised insert use and a compact mass of 0.462 kg, the head supports continuous production where consistent corner quality is needed. What is the cutting angle and how does it affect machining? The head provides a 90° cutting angle, optimised for shoulder cuts and right-angle turning tasks, improving dimensional accuracy and simplifying setup. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
63mm Indexable Turning Tool Holder 90° For LNMT 0804 Inserts, M2.5x7 Torx Screw - Teknik Makina
Take advantage of a robust combination of precise geometry, secure Torx clamping and broad compatibility with LNMT 0804 indexable inserts for reliable shoulder and profile machining. Order the component directly via Metav Werkzeuge or consult the Metav team for application-specific advice. Eckmesserkopf T224TM — 90° angle tool head for LNMT 0804 indexable inserts, Ø63 mm The Eckmesserkopf T224TM is an angle tool head engineered for precision shoulder cutting and finishing with LNMT 0804 indexable inserts, suited for industrial milling setups where compactness and repeatable geometry are required 90° cutting angle for clear shoulder cuts Compatible with LNMT 0804 indexable inserts Ø63 mm body with 22 mm mounting diameter Torx M2.5×7 clamping screw, T8 key required High-precision geometry for consistent shoulder cuts The compact head geometry provides a defined 90° cutting angle, which is essential for square shoulders and precise contour transfers. The deliberate combination of a Ø63 mm body and a 22 mm mounting diameter produces a rigid assembly that reduces vibration and run-out. This stability translates into improved surface finish and repeatable dimensional results, making the component suitable for serial work where tight tolerances must be maintained. Built for reliable insert clamping and quick indexing Secure retention of the indexable grade is ensured by the Torx M2.5×7 clamping screw operated with a T8 key, offering a predictable torque interface for safe insert locking. The mechanical design allows fast index changes of the LNMT 0804 insert type, minimising machine downtime. Where frequent insert rotation is part of the process, the defined clamping system reduces the risk of misalignment and helps maintain consistent cutting geometry over many cycles. Compact form factor that supports efficient tool management With an overall length of 40 mm and a mass of 0.665 kg, the head occupies little axial space while contributing positive stability to the tool assembly. The compact footprint is advantageous in tight setups or when multiple toolheads are mounted on small turrets. The head’s dimensions and weight aid in predictable dynamic behaviour during high-speed indexing or short-reach machining, which supports cycle-time optimisation without sacrificing process control. Compatibility and workshop integration for straightforward procurement Designed for use with LNMT 0804 indexable inserts and noted compatibility with ISCAR insert variants, the head fits common industrial insert standards to simplify stocking and logistics. The combination of established insert formats and an accessible clamping standard helps to reduce the variety of spare parts required on the shop floor. When paired with consistent measuring and set-up procedures, the head supports efficient changeover routines and predictable production output. For precision corner machining with LNMT 0804 inserts, rely on the Teknik Makina T224TM and contact Metav Werkzeuge for tailored guidance and guaranteed supply from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: T224TM Manufacturer: Teknik Makina Compatible inserts: LNMT 0804 Compatible insert manufacturer: ISCAR Clamping screw: Torx M2.5×7, key T8 Numeric data Diameter: 63 mm Mounting diameter: 22 mm Total length: 40 mm Weight: 0.665 kg Cutting angle: 90° Design & features For LNMT 0804 indexable inserts Compatible with ISCAR inserts Torx clamping screw for secure retention Compact head for constrained set-ups Number of cutting edges: 9 FAQ Which insert type is required for this head? The head accepts LNMT 0804 indexable inserts, specified in the product data and noted for compatibility with ISCAR variants. What is the required mounting diameter? Mounting is specified as 22 mm (aufnahme mm d), providing a rigid connection to standard toolholders. How is the insert clamped and what key is needed? Clamping is via a Torx M2.5×7 screw; a T8 Torx key is specified for tightening and loosening. What operations is this head best suited for? The geometry and 90° cutting angle suit accurate shoulder milling and profile finishing where defined right-angle features are required. What is the SKU for ordering or referencing? The SKU is T224TM, referenced as the Teknik Makina angle tool head for LNMT 0804 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Insertable 90° Corner Tool Head for APKT 1604 Indexable Inserts, M4x10 Torx T15 - Teknik Makina
Combining a 90° cutting geometry with a 63 mm head diameter and a secure 22 mm shank, this corner cutter head ensures stable shoulder machining and reliable insert clamping; order the component directly via Metav Werkzeuge or contact our consultants for application-specific advice. Corner cutter head T184TM – 90° head for APKT 1604 indexable inserts by Teknik Makina The Corner cutter head T184TM is a compact indexable insert holder engineered for precise 90° shoulder and profile machining using APKT 1604 indexable inserts. 90° cutting angle for precise shoulder cuts 63 mm head diameter for stable machining 22 mm shank diameter for secure mounting Compatible with APKT 1604 inserts by Korloy Accurate perpendicular faces through stable geometry The 90° cutting angle delivers consistent, perpendicular shoulder faces that reduce secondary operations and simplify fixture set-up. With a 63 mm head diameter, the design increases mass at the cutting zone to damp vibrations and improve surface finish during interrupted cuts. The head accommodates five cutting edges, enabling repeatable engagement geometry that supports predictable tool life and process stability in mixed production environments. Secure clamping and straightforward maintenance A 22 mm shank diameter provides a robust mounting that resists micro‑movement under load, while the overall mass of 0.577 kg contributes to axial and radial stability. Insert retention is achieved with an M4x10 Torx screw, tightened using a T15 key for reproducible clamp force and safe removal without specialised tooling. These practical fastening details reduce downtime during index changes and simplify routine inspections, supporting sustained throughput in small to medium batch runs. Broad insert compatibility and workshop integration Designed for APKT 1604 indexable inserts and tested for use with Korloy grades, the tool head integrates into common tooling kits and helps streamline inventory. The modular holder adapts to standard insert geometries, enabling economical regrinding and quick replacement cycles. Metav's product selection focuses on pragmatic interoperability: shops benefit from fewer bespoke holders and faster tool changes, while maintenance teams appreciate the use of common Torx hardware and widely available inserts. Discuss machining requirements with Metav Werkzeuge to confirm the best Teknik Cutting Tools corner cutter head configuration for specific materials and to arrange supply — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T184TM Manufacturer: Teknik Makina For inserts: APKT 1604 Indexable Inserts Compatible insert manufacturer: Korloy Torx screw: M4x10 Facts Head diameter: 63 mm Shank diameter: 22 mm Overall length: 45 mm Weight: 0.577 kg Cutting angle: 90° Number of cutting edges: 5 Special features Torx key: T15 Compatible with APKT 1604 inserts Designed for secure insert clamping Compact design for shoulder and profile machining FAQ Which inserts fit this tool head? The Corner cutter head T184TM accepts APKT 1604 indexable inserts; compatibility with Korloy grades is specified for common machining applications. What mounting diameter is required? Mounting requires a 22 mm shank diameter, which provides a rigid connection to the toolholder or arbor. How are inserts secured in the head? Inserts are clamped using an M4x10 Torx screw, tightened with a T15 key, ensuring repeatable clamp force and straightforward replacement. What cutting angle does the head provide and what is it best for? The head provides a 90° cutting angle, making it suitable for perpendicular shoulder machining and profile work where defined right‑angle faces are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Planar Milling Head for WNMX 1305 Indexable Inserts 4-Edged, 50mm Overall Height, T15 Torx - Teknik Makina
Take advantage of a robust combination of precise fit for WNMX 1305 indexable inserts and a 63 mm diameter body with four cutting edges for balanced, efficient face milling; order via Metav Werkzeuge or contact our consultants for technical advice. Face milling head for WNMX 1305 indexable inserts — 63 mm diameter | Teknik Makina Face milling head for versatile face milling operations; compatible with WNMX 1305 indexable inserts and designed for secure mounting in CNC tooling systems 63 mm diameter for stable cutting Four cutting edges for efficient material removal 22 mm shank diameter for secure mounting Compatible with Korloy WNMX 1305 inserts Optimised geometry for reliable face milling results The face milling head delivers a purposeful balance between rigidity and accessibility. With a 63 mm diameter, the body inherently reduces vibration during engagement, which supports consistent surface finish and predictable tool life. The head accepts WNMX 1305 indexable inserts, a widely used insert form, enabling straightforward replenishment and rapid index changes. For production environments seeking consistent cycle times, this geometry reduces variation and contributes to measurable process stability. Secure mounting and straightforward assembly to cut downtime A solid 22 mm shank diameter and the supplied M4x10 Torx fastening ensure a firm connection to the tool holder, reducing the risk of loosening under intermittent loads. The head uses a Torx T15 key interface for the clamp screw, which simplifies maintenance and standardises fastener tools across the workshop. These assembly features help to shorten intervention times during insert changes and support predictable maintenance intervals, improving overall shop-floor efficiency. Practical design that supports everyday workshop needs The cutter is furnished with four cutting edges, arranged to offer even bite and load distribution across the cut. This arrangement helps to maintain balance during rotation and to split cutting forces evenly, which is particularly beneficial for face-facing and shallow shoulder operations. Compatibility with Korloy WNMX 1305 inserts broadens the choice of grades and geometries, allowing selection for finishing or light roughing without changing the body — a pragmatic route to flexible machining strategies. Why Metav supply and Teknik Makina quality matter Sourced from Teknik Makina and distributed via Metav Werkzeuge, the component benefits from a tested supply chain and accessibility across Europe. Metav’s emphasis on precision democratisation means the head is available with transparent logistics from Emmerich, backed by a decades‑long product range that reduces vendor complexity in busy procurement processes. For decision-makers, the combination of a purpose-built cutter body and reliable distribution translates into fewer supply interruptions and clearer expectations for production planning. Contact Metav Werkzeuge for a personalised specification check or to arrange a procurement consultation for the Teknik Makina face milling head T687TM — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility with existing tool holders and insert grades Technical Data Article number: T687TM Manufacturer: Teknik Makina Product: Face milling head for WNMX 1305 indexable inserts Core technical data Diameter: 63 mm Overall height: 50 mm Cutting edges: 4 Shank (toolholder) diameter: 22 mm Fastening screw: M4x10 Torx key size: T15 Special features Compatible with Korloy WNMX 1305 indexable inserts Secure Torx clamping system Balanced design for reduced vibration Designed for straightforward insert replacement FAQ Which insert type fits this milling head? The face milling head T687TM is designed specifically for WNMX 1305 indexable inserts and is compatible with Korloy WNMX 1305 grades. What is the shank diameter and how is the head secured? The cutter features a 22 mm shank and is secured using an M4x10 Torx screw tightened with a T15 key. How many cutting edges does the head provide and what is the benefit? The head has four cutting edges, which deliver balanced cutting forces and support consistent surface finishes during face milling. Is the body suitable for fast insert changes in production? Yes, the design and standard Torx clamping permit rapid insert changes and straightforward maintenance, reducing downtime for tooling swaps. Who supplies this component and what is the SKU for ordering? The item is supplied by Teknik Makina and listed as SKU T687TM for ordering and reference. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Planer Insert Head for SNMU 1305 Indexable Inserts, 45° Cutting Angle, 6 Inserts, M5x12 Screw - Teknik Makina
Benefit from a compact, high-precision face milling head that combines sturdy mounting, a balanced 63 mm diameter and a 45° cutting geometry for reliable surface finish and controlled chip flow. Choose direct supply through Metav Werkzeuge for consistent availability or contact Metav’s consultants for technical clarification. Face milling head for SNMU 1305 indexable inserts — 63 mm, 6-edge cutting head (Teknik Makina) The Face milling head for SNMU 1305 indexable inserts is a compact cutting head engineered for stable face milling and high repeatability in small to medium production runs. Compact 63 mm diameter for tight spaces Six cutting edges for continuous cutting M5x12 Torx fastening with T20 key Compatible with ISCAR SNMU 1305 inserts Secure mounting for stable machining and predictable results The head is engineered with a 22 mm bore to ensure a secure fit on standard tool holders, combined with an M5x12 Torx screw and T20 key drive for positive clamping. This fastening arrangement reduces micro-movement at the tool–holder interface, which in turn lowers vibration and improves surface quality during interrupted or full-width face milling. The result is consistent geometry control and fewer rework cycles. Predictable cutting behaviour and improved surface finish A 45° cutting angle together with six cutting edges creates evenly distributed cutting forces and continuous engagement across the face. The 63 mm diameter balances contact area and stiffness, producing a smoother finish with reduced risk of chatter in typical workshop setups. The assembly’s mass (approx. 0.645 kg) and overall height (44 mm) contribute to a compact centre of gravity that supports stable operation at moderate spindle speeds. Broad insert compatibility for flexible tooling strategies Designed specifically for SNMU 1305 indexable inserts, the head accepts inserts from ISCAR, enabling the use of widely available geometries and grades. This compatibility supports flexible tooling strategies: abrasive, semi-finishing or finishing inserts can be used depending on the chosen insert grade and geometry, without changing the holder. The modular approach shortens changeover times and helps maintain productivity across varied part families. Serviceability and workshop efficiency explained Carbide inserts are replaced without full disassembly thanks to the accessible Torx screw system, which accelerates maintenance and reduces downtime. The head’s simple interface and common fastening standard make it a practical choice for production shops seeking reliable repeatability and straightforward spare parts handling. Metav Werkzeuge’s stocking and distribution reduce lead times and act as a regional quality filter for workshop supply chains. Contact Metav Werkzeuge for expert advice on Teknik Makina components and to arrange direct supply of this face milling head with 63 mm diameter and SNMU 1305 compatibility Technical data Article number: T235TM Manufacturer: Teknik Makina Fits inserts: SNMU 1305 (ISCAR) SKU: T235TM Numbers / core technical data Diameter: 63 mm Overall height: 44 mm Bore / shank diameter: 22 mm Number of cutting edges: 6 Weight: 0.645 kg Cutting angle: 45° Torx screw: M5x12 Special features / versions Compatible insert manufacturer: ISCAR Fastening key size: T20 Intended use: face milling with indexable inserts Files: 64e8a0e77cf48d9e17c0d1df, 64e8a12911e3b4da1987f08a FAQ What insert type does this milling head accept? The face milling head accepts SNMU 1305 indexable inserts, compatible with ISCAR geometries and grades for face-milling applications. Which fasteners are required for insert clamping? Insert clamping uses an M5x12 Torx screw tightened with a T20 key on the Teknik Makina face milling head (SKU T235TM). What are the key dimensional constraints to check before ordering? Confirm the 63 mm head diameter and 22 mm mounting bore match the available tool holder; the overall height is 44 mm and weight is approx. 0.645 kg. Is the head suitable for quick insert changes on the shop floor? Yes; the accessible Torx screw system on the face milling head allows rapid insert replacement and straightforward maintenance using a standard T20 key. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
63mm Planing Cutter Head for LNMU 0303 Indexable Inserts 9 Cutting Edges, 22mm Shank - Teknik Makina
Take advantage of the combination of robust build quality, precise mounting and fast insert changes to keep production steady and predictable; order or request configuration advice from Metav Werkzeuge for tailored integration into existing toolholders. Face milling head T730TM – 63 mm diameter, 22 mm mounting for LNMU 0303 inserts (Teknik Makina) Face milling head T730TM designed for precision face milling with LNMU 0303 indexable inserts, suitable for finishing and light roughing in professional CNC and turning centres. Compact Ø63 mm body for stable operation 22 mm mounting diameter for standard holders Fits LNMU 0303 indexable inserts Torx T8 fixation with M2.5×7 screws Consistent surface quality through compact design The face milling head offers a compact body with a Ø63 mm diameter and an overall height of 50 mm, delivering a stable tool geometry that reduces vibration during face milling. The design supports consistent chip evacuation and predictable cutting forces, which in turn improves surface finish and reduces rework. For operations that demand repeatable results, a stable cutter body limits chatter and enables tighter process tolerances, translating into measurable savings on downstream operations. Quick tool changes and secure clamping for reduced downtime Equipped for efficient maintenance, the head uses a Torx T8 drive and M2.5×7 fixing screws to secure the inserts. This fixation method allows fast, reliable insert replacement with commonly available tools, shortening non-productive time at the machine. The 22 mm mounting diameter is compatible with many standard holders, ensuring secure seating in the tool turret or holder and preserving concentricity. Reduced changeover time and straightforward serviceability contribute directly to higher machine uptime and lower labour costs. Broad compatibility for workshop integration The cutter is configured for LNMU 0303 indexable inserts, making it suitable for a wide range of face-milling tasks where small triangular inserts are preferred for good edge stability and easy indexing. The head features nine cutting positions (9 cutting edges) to balance cutting capacity and chip distribution in interrupted cuts. Supplied by Teknik Makina, the unit is engineered to match common industrial toolholding standards so it can be integrated into mixed fleets without complex adapter work, supporting a rational consolidation of tooling across machines. For tailored advice on integrating the Face milling head T730TM into an existing toolset or to request a specification sheet, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for a customised recommendation and rapid supply arrangement. Technical data SKU: T730TM Manufacturer: Teknik Makina Product: Face milling head for LNMU 0303 indexable inserts Torx key: T8 Torx screw: M2.5×7 Core dimensions Diameter: 63 mm Overall height: 50 mm Mounting diameter: 22 mm Cutting edges: 9 Features & compatibility Compatible inserts: LNMU 0303 Compatible insert manufacturer: TNGLY-OKE eClass: 21180902 FAQ Which insert type fits the milling head? The head is designed for LNMU 0303 indexable inserts; the Face milling head T730TM secures these inserts for efficient face milling with small triangular cutting edges. What is the required mounting diameter? Mounting requires a 22 mm toolholder interface; the 22 mm dimension ensures proper seating and concentricity in standard holders. How are the inserts fixed to the head? Inserts are secured with Torx T8 fastenings using M2.5×7 screws, allowing quick and reliable replacement on the Teknik Makina milling head (SKU T730TM). For which applications is this milling head suited? Best suited to precision face milling and light roughing, the head provides stable cutting for finishing passes where consistent surface quality is required. How many cutting edges are available per head? The cutter carries 9 cutting edges, offering a balance between cutting capacity and chip control for interrupted and continuous cuts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Planing Cutter Head for ONMX 0806 Indexable Inserts, 45° Cutting Angle, 22mm Shank - Teknik Makina
Combine robust build quality, a compact Ø63 mm head and a precise 45° cutting angle to boost face-milling efficiency while keeping changeover times short. Order the cutter head directly via Metav Werkzeuge or consult our specialists for application advice. Face-milling head T780TM by Teknik Cutting Tools — 45° cutting angle, Ø63 mm The Face-milling head T780TM is a compact, high-stability cutter head designed for face milling with ONMX 0806 indexable inserts in industrial and job-shop milling applications 45° cutting angle for efficient face milling Ø63 mm head for compact tool envelopes Compatible with ONMX 0806 indexable inserts 22 mm shank diameter for secure clamping Torx M5x12 screw, T20 key for quick assembly Improved cutting performance for shorter cycle times The T780TM combines a 45° cutting angle with a compact Ø63 mm diameter to reduce cutting forces and improve chip flow during face milling. This geometry lowers radial load on the spindle and enables higher feed rates without compromising surface finish. Where stability and predictable performance are required, the head’s configuration with five cutting edges ensures consistent engagement and smooth material removal. The result is measurable productivity gains on components requiring flat faces or shoulder operations. Fast insert changes and broad compatibility reduce downtime Engineered for practical shop-floor handling, the milling head accepts ONMX 0806 indexable inserts and is compatible with major insert brands such as ISCAR, Korloy, LMN and YG‑1, allowing easy sourcing of cutting grades. Insert clamping is secured with a Torx M5x12 screw operated by a T20 key, providing rapid, repeatable index changes and minimal tooling downtime. The 22 mm shank offers a familiar mounting size for many toolholders, helping to streamline tool inventories and setup time. Built for reliable workshop operation and straightforward integration With an overall length of 40 mm and a mass of 1.063 kg, the head balances rigidity and manageable mass for use in both high-volume milling cells and flexible manufacturing environments. The compact design supports tighter tool envelopes and easier clearance management on multi‑axis machines. Documented dimensions and the head’s compatibility with standard ONMX 0806 inserts mean integration into existing tool systems is straightforward, reducing engineering overhead and ensuring reliable repeatability in production. Contact Metav Werkzeuge to discuss suitability for specific materials and cutting conditions and to secure the Teknik Cutting Tools Face‑milling head T780TM for your production line Technical data Article number: T780TM Manufacturer: Teknik Makina Product: Face-milling head (Planmesserkopf) Compatible inserts: ONMX 0806 Compatible insert manufacturers: ISCAR, Korloy, LMN, YG-1 eClass: 21180902 Facts Diameter: 63 mm Cutting angle: 45° Shank diameter (D): 22 mm Overall length: 40 mm Weight: 1.063 kg Number of cutting edges: 5 Special features Torx screw: M5x12 Torx key size: T20 Suited for ONMX 0806 indexable inserts Compact head for constrained tool envelopes FAQ What insert type does this milling head accept? The face-milling head accepts ONMX 0806 indexable inserts, specified for the T780TM and suitable for common facing tasks. Can existing inserts from other brands be used? Yes, the head is compatible with inserts from ISCAR, Korloy, LMN and YG‑1, allowing the use of familiar cutting grades with the T780TM. Which toolholder shank diameter is required? The cutter head has a 22 mm shank diameter and is designed for toolholders that accept a 22 mm mounting. How are inserts secured to the head? Inserts are fixed with a Torx M5x12 screw; the recommended key for assembly and indexing is a T20. Is the head suitable for tight tool envelopes on multi‑axis machines? The compact Ø63 mm head and 40 mm overall length make the T780TM well suited to operations with limited clearance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Planing Cutter Head for SDMT 09T3 Indexable Inserts, 6 Teeth, 22mm Shank - Teknik Makina
Take advantage of precise compatibility with SDMT 09T3 indexable inserts and the compact Ø63 mm cutter body to maintain efficient face‑milling operations; robust Torx fastening and a 22 mm shank support secure clamping and quick insert changes. Order the tool directly via Metav Werkzeuge or consult the technical team for integration advice. Face‑milling head T364TM — compact milling head, Ø63 mm, for SDMT 09T3 The Face‑milling head T364TM is a compact milling tool holder designed for economical face milling with SDMT 09T3 indexable inserts in general machining and small‑batch production. 63 mm cutting diameter For SDMT 09T3 indexable inserts Shank Ø 22 mm, overall length 40 mm Torx M3.5×8.5 screw, T15 key required Stable clamping for consistent surface results The milling head delivers a dependable contact interface thanks to its shank Ø22 mm and secure fastening system. This configuration reduces micro‑movement at the toolholder, which translates into a more consistent surface finish and predictable tool life. The head's modest 0.592 kg mass strikes a balance between rigidity and manageable spindle load, enabling productive cutting without over‑stressing smaller milling machines. Fast indexable‑insert changes and secure screw fixation Designed for use with SDMT 09T3 inserts, the tool permits quick insert replacement to keep downtimes low. The insert is fastened by a Torx M3.5×8.5 screw that requires a T15 key; this standardised interface simplifies workshop logistics and reduces the risk of incorrect tools being used during service. Clear torque practice when tightening the Torx screw ensures reliable clamping and repeatable performance. Compact footprint for versatile workshop setups With a 63 mm cutter diameter and an overall length of 40 mm, the head is suited to confined setups where access and tool‑reach are limiting factors. The compact design supports tight fixturing and enables high‑precision finishing passes on small parts, where larger heads would be impractical. The combination of a small tool body and the ability to accept industry‑standard inserts makes the head a flexible choice for mixed production environments. Compatibility and integration with existing tooling The cutter is compatible with inserts from established manufacturers such as ZCC, which facilitates straightforward sourcing of replacements. The standard 22 mm holder diameter matches common arbors and adapters, reducing the need for custom interfaces. If additional technical data is required for machine integration or process planning, Metav Werkzeuge can provide specification sheets and mounting guidance to help verify fit and balance. Contact Metav Werkzeuge for tailored application advice and to arrange supply of the T364TM face‑milling head directly from stock in Emmerich Technical data SKU: T364TM Product name: Face‑milling head Brand: Teknik Makina Core technical data Cutting diameter: 63 mm Shank / bore: 22 mm Overall length: 40 mm Weight: 0.592 kg Number of cutting edges: 6 Special features Compatible with SDMT 09T3 indexable inserts Recommended insert manufacturer: ZCC Fastening: Torx screw M3.5×8.5 Torx key size: T15 FAQ What inserts fit this milling head? The face‑milling head accepts SDMT 09T3 indexable inserts; compatibility with ZCC‑manufactured inserts is specified for straightforward sourcing. Which tool secures the insert and what size is the screw? Inserts are fixed with a Torx M3.5×8.5 screw; a T15 Torx key is required for both installation and removal on the T364TM. Is the head suitable for smaller machines? Yes. The compact overall length of 40 mm and moderate mass (about 0.592 kg) make the head appropriate for smaller milling spindles where excessive overhang would be a concern. How many cutting edges are provided by the assembly? The assembly is configured with 6 effective cutting edges when fully equipped with SDMT 09T3 inserts, offering a balance of material removal and surface control. What arbor or holder diameter is required for mounting? The tool is designed for a 22 mm shank interface, matching common arbors and adapters for simple integration into existing tooling systems. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
63mm Planing Cutter Head for SDMT 1204 Indexable Inserts, 5 Cutting Edges, 22mm Shank - Teknik Makina
Take advantage of a compact, high-stability cutter head that accepts SDMT 1204 indexable inserts and secures them with an M4x10 Torx screw (T15) for reliable clamping; order this item directly via Metav Werkzeuge or consult the team for integration advice. Planmesserkopf — face milling head for SDMT 1204 indexable inserts, 63 mm diameter Planmesserkopf designed as a compact face milling head, ideal for light to medium machining tasks using SDMT 1204 indexable inserts and a 22 mm shank for space-saving installation 63 mm diameter for stable cutting Compatible with SDMT 1204 indexable inserts 22 mm shank for compact mounting Secure clamping with M4x10 Torx screw (T15) Precision and steady cuts in compact form The cutter head is engineered to deliver consistent results through its 63 mm diameter and five cutting edges, which together increase contact stability and reduce vibration during operation. This design translates into improved surface finish and longer insert life compared with smaller-diameter alternatives. The overall compactness is retained with a 40 mm length, allowing installation in tighter toolholders without sacrificing cutting performance. For users unfamiliar with indexable tooling: indexable inserts are replaceable cutting tips that are clamped into a holder, so only the insert needs replacement when worn rather than the whole tool, saving time and cost. Fast insert changes and secure fastening for reliable production Compatibility with SDMT 1204 indexable inserts — including those from ZCC — ensures access to a wide range of cutting grades and geometries for different materials. The inserts are retained by an M4x10 Torx screw, tightened with a T15 key, providing a predictable clamping force and simple servicing on the shop floor. The fast, tool-based retention reduces downtime for insert changes and avoids complex adjustment procedures. Where vibration or runout is a concern, the compact 22 mm shank and balanced geometry minimise adverse effects, supporting reproducible machining results even at moderate spindle speeds. Practical workshop integration and handling benefits Weighing 0.422 kg, the head combines low inertia with sufficient mass for stable cutting dynamics, which helps when working on finishing passes or shallow roughing. The 22 mm attachment diameter is commonly used in modular tool systems and is straightforward to mount in compatible toolholders. For workshops seeking a reliable compromise between tool footprint and cutting stability, this cutter head fits into existing setups with minimal adaptation. If material-specific guidance is required, technical advisors can recommend suitable insert grades and cutting parameters to match the application. For technical advice or to secure supply of the Teknik Makina face milling head (SKU T359TM), contact Metav Werkzeuge in Emmerich for tailored recommendations and fast delivery. Technical data SKU: T359TM Brand: Teknik Makina Article: face milling head for SDMT 1204 indexable inserts ECLASS: 21181015 Facts Diameter: 63 mm Number of cutting edges: 5 Shank diameter (attachment): 22 mm Overall length: 40 mm Weight: 0.422 kg Special features Compatible insert type: SDMT 1204 Compatible insert manufacturer: ZCC Torx screw: M4x10 Torx key: T15 FAQ Which inserts fit this cutter head? The cutter head accepts SDMT 1204 indexable inserts; inserts from ZCC are confirmed compatible with this Teknik Makina face milling head (SKU T359TM). How is the insert secured in the tool? Inserts are clamped with an M4x10 Torx screw, tightened using a T15 key; this provides a secure and serviceable retention method for the Planmesserkopf. What shank size is required for mounting? The tool has a 22 mm attachment diameter, so a compatible 22 mm toolholder is required for correct mounting and alignment. Is the head suitable for finishing operations? Yes — the combination of 63 mm diameter, five cutting edges and a balanced compact design supports stable finishing passes when paired with the appropriate insert grade. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
63mm Planing Cutter Head for SPKN 1203 Indexable Inserts, 75° Cutting Angle, 4 Inserts, 22mm Mount - Teknik Makina
Take advantage of precise mounting and efficient material removal thanks to a 22 mm shank, Ø 63 mm cutter diameter and four cutting edges; reliable assembly with an M8x24 fastening screw and 5 mm Allen key keeps set-up fast and vibration low. Order the component directly via Metav Werkzeuge or ask our consultants for compatibility details. Planing cutter head – cutter head for SPKN 1203 indexable inserts, Ø 63 mm (Teknik Makina) A Planing cutter head designed for SPKN 1203 indexable inserts, built for stable mounting and consistent surface quality in planing and face-milling operations For SPKN 1203 indexable inserts Ø 63 mm nominal diameter 4 cutting edges for efficient stock removal 22 mm shank diameter for secure mounting Stable mounting for consistent surface quality A robust mounting system centred on the 22 mm shank and the M8x24 fastening screw delivers reduced runout and reliable repeatability. The fixed 75° cutting angle helps maintain a predictable chip flow, resulting in a smoother surface finish and less rework. Stable clamping means lower vibration during heavy cuts, which extends tool life and enables consistent part tolerances without frequent realignment. Faster cycle times through four cutting edges and compact design Featuring 4 cutting edges and a compact overall length of 45 mm, the head is optimised for short tool overhangs and effective material removal. The design accepts SPKN 1203 indexable inserts, enabling quick edge changes and uniform cutting geometry across all positions. With a Ø 63 mm diameter the head balances rigidity and accessibility at the cutter periphery, allowing improved metal removal rates while keeping thermal and mechanical loads manageable. Quick retooling and predictable maintenance intervals The assembly uses an M8x24 hex screw and a 5 mm Allen key for secure, uncomplicated insert changes and maintenance. The component’s modest weight (0.6 kg) and standard shank diameter simplify handling and machine interfacing, reducing set-up time at tool changes. Documented, repeatable procedures supported by familiar fastenings lead to lower downtime and easier planning of preventive maintenance, promoting continuous production flows and dependable output. Contact Metav Werkzeuge for procurement and technical advice on Teknik Cutting Tools items; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T150TM Manufacturer: Teknik Makina Item: Planing cutter head For inserts: SPKN 1203 Indexable Inserts Diameter: 63 mm Shank diameter: 22 mm Overall length: 45 mm Cutting edges: 4 Cutting angle: 75° Fastening screw: M8x24 Allen key: 5 mm Weight: 0.6 kg Facts Diameter: 63 mm Shank diameter: 22 mm Overall length: 45 mm Weight: 0.6 kg Cutting edges: 4 Cutting angle: 75° Special features For SPKN 1203 indexable inserts Fastening screw M8x24 5 mm Allen key required Compact design with Ø 63 mm FAQ What inserts are compatible with this cutter head? The cutter head accepts SPKN 1203 indexable inserts; this configuration ensures consistent geometry across the four cutting positions for predictable machining behaviour. What is the shank diameter and mounting requirement? The unit is supplied with a 22 mm shank diameter and is secured with an M8x24 hex screw; a 5 mm Allen key is used for assembly and insert changes. How many cutting edges does the head provide and what is the benefit? The head carries 4 cutting edges, which allows for efficient stock removal and balanced cutting forces, improving cycle times and finish quality. Is this head suitable for heavy roughing cuts? The compact design and secure 22 mm shank give good rigidity for interrupted and continuous cuts within the machine’s capability; final suitability depends on the machine and cutting parameters used. What measuring or maintenance advantages does this design offer? With standard fastening and a modest weight of 0.6 kg, the head enables quick retooling, repeatable set-up and straightforward preventive maintenance scheduling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Planflächen schneller und präziser herstellen
Planfräser, auch als Planfräswerkzeug oder Stirnplanfräser bezeichnet, sind meist mit Wendeschneidplatten bestückte Trägerwerkzeuge für Fräsmaschinen. Sie ermöglichen das großflächige Abtragen von Material, das Planfräsen von Werkstücken auf Maß und die Erzeugung einer gleichmäßigen, planaren Oberflächenstruktur.
Wie das Planfräswerkzeug technisch wirkt und wann es unabdingbar ist
Ein Planfräswerkzeug arbeitet offen auf der Materialoberfläche, sodass Späne radial abgeführt werden. Bei Ausführungen ohne Innenkühlung erfolgt die Wärme- und Spanableitung über externe Kühlmitteldüsen oder zugeführte Druckluft; das ist bei vielen regulären Planfräsarbeiten ausreichend. Modelle mit Innenkühlung verfügen über integrierte Bohrungen und Kanäle, die Kühlschmierstoff oder Blasluft direkt an die Schneidkanten leiten. Diese gezielte Zufuhr verhindert thermische Überlastung, reduziert Aufbauschneidenbildung und spült Späne zuverlässig aus der Schnittzone – entscheidend bei schwerzerspanenden, klebenden Werkstoffen oder sehr großen Schnittbreiten.
Mehr Effizienz im Werkstattalltag durch gezielten Einsatz
- Reduziert Rüstzeiten durch modulare Bestückung mit Wendeschneidplatten und einfachem Plattenwechsel.
- Verbessert die Oberflächengüte durch gleichmäßige Spanabfuhr und, bei Bedarf, gezielte Innenkühlung.
- Erhöht die Standzeit der Werkzeuge, weil thermische Belastung und Aufbauschneidenbildung minimiert werden.
- Sorgt für konstante Maßhaltigkeit bei großflächigen Bearbeitungen dank stabiler Trägerwerkzeuge.
Metav als zuverlässiger Partner für Ihre Planbearbeitung
Metav steht für Demokratisierung der Präzision und kombiniert jahrzehntelange Fachkompetenz mit einem breiten Sortiment. Aus dem Lager in Emmerich liefert Metav als Qualitätsfilter ein Sortiment, das Werkstätten und Industrie mit technisch passenden Planfräsern versorgt. Mit über 48.000 zufriedenen Kunden und mehr als 250.000 Produkten bietet Metav die Auswahl und Verfügbarkeit, um die passende Ausführung — mit oder ohne Innenkühlung — für Ihre Bearbeitungssituation zu finden.
Kurz und prägnant
Ein Planfräser ist das zentrale Werkzeug, wenn große, ebene Flächen schnell, maßhaltig und mit hoher Oberflächenqualität herzustellen sind. Die Wahl zwischen ohne Innenkühlung und mit Innenkühlung richtet sich nach Werkstoff, Schnittbreite und Wärmeentwicklung.
FAQ
Wann ist ein Planfräser mit Innenkühlung erforderlich?
Bei schwerzerspanenden oder stark wärmeentwickelnden Werkstoffen sowie bei sehr großen Schnittbreiten empfiehlt sich ein Planfräser mit Innenkühlung, weil die gezielte Kühlschmierstoffzufuhr thermische Überlastung und Aufbauschneidenbildung verhindert.
Reicht bei normalen Stahlblechen ein Planfräswerkzeug ohne Innenkühlung aus?
Für viele reguläre Planfräsarbeiten an unlegierten und niedrig legierten Stählen ist ein Planfräswerkzeug ohne Innenkühlung ausreichend, da Späne offen radial abfließen und externe Kühlmitteldüsen oder Druckluft die Wärmeableitung übernehmen.
Wie verlängert man die Standzeit von Planfräsern effektiv?
Die Standzeit eines Planfräswerkzeugs lässt sich durch passende Wendeschneidplatten, richtige Schnittparameter, konsequente Spanabfuhr und bei Bedarf durch Innenkühlung deutlich erhöhen.
Welche Vorteile bieten modulare Planfräswerkzeuge im Produktionsalltag?
Modulare Planfräser ermöglichen schnellen Plattenwechsel, reduzieren Rüstzeiten und erlauben die Anpassung an unterschiedliche Schnittbreiten und Werkstoffe ohne kompletten Werkzeugwechsel.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com