Planfräser für schnelle, plane Flächenbearbeitung
Planfräser sind speziell entwickelte Trägerwerkzeuge zum großflächigen Abtrag und exakten Planfräsen von Werkstücken und verbessern die Oberflächenqualität sowie die Prozessstabilität bei der Bearbeitung von Stahl, Guss und NE-Metallen; sie kommen sowohl in offener Ausführung ohne Innenkühlung als auch als innengekühlte Varianten zum Einsatz, wobei die innengekühlte Version durch gezielte Kühlmittelzufuhr thermische Überlastung verhindert und die Standzeit erhöht. Die Werkzeuge dienen dazu, große Schnittbreiten effizient zu bearbeiten und durch optimale Spanabfuhr eine gleichmäßige Oberfläche zu erzeugen, wobei die offene Ausführung einfache Fräsaufgaben mit externer Kühlung abdeckt. Planfräser bieten besonders bei schwer zerspanbaren, wärmeempfindlichen oder klebenden Werkstoffen Vorteile, weil die innengekühlte Bauform die Bildung von Aufbauschneiden reduziert und die Oberflächengüte verbessert.
63mm Planing Cutter Head for WNMX 09T3 Indexable Inserts, 6 Teeth, 22mm Shank - Teknik Makina
Take advantage of a compact, insert-compatible face milling head that combines reliable mounting, a Ø63 mm cutter body and efficient chip control for steady surface quality; order directly via Metav Werkzeuge or ask the technical consultants for application advice. Planmesserkopf face milling head — Ø63 mm, for WNMX 09T3 indexable inserts (Teknik Makina) The Planmesserkopf is a precision face milling head designed for use with WNMX 09T3 indexable inserts, offering a compact, robust solution for face milling tasks in small to medium batch production. Ø63 mm face milling head For WNMX 09T3 indexable inserts 6 cutting edges for stable machining 22 mm shank diameter, robust mounting Consistent compatibility that reduces setup time The compact face milling head is built specifically for WNMX 09T3 indexable inserts and is confirmed compatible with Korloy plates, which simplifies procurement and tool-change logistics. Matching the insert family means fewer adapter parts and faster changeovers; shops benefit from predictable tool life and reduced downtime when standardising on a single insert geometry. The clear designation of the insert type supports inventory planning and speeds up ordering procedures. Secure clamping for repeatable results Clamping is achieved with an M3x7 Torx screw tightened using a T8 Torx key, which ensures reliable seating of the insert and consistent cutting geometry after each change. The tool’s 22 mm interface provides a stable connection to commonly used holders, reducing micro-movement under cutting loads. Reliable clamping reduces rework and contributes to repeatable component tolerances in serial production. Designed for stable cutting and good surface finish With 6 cutting edges distributed around the cutter, the head promotes even load distribution and steady chip formation, which helps to maintain surface finish and extend insert life. The overall 40 mm length and a weight of 0.542 kg contribute to a well-balanced rotational behaviour that supports vibration damping and consistent cutting engagement. These characteristics are particularly valuable when aiming for uniform finishes across multiple workpieces. Practical choice for workshop standardisation As a compact, insert-based solution, the milling head supports efficient tooling strategies in workshops and small production environments. The straightforward compatibility with WNMX 09T3 inserts reduces the variety of spare parts needed while maintaining machining flexibility. The product’s classification (ECLASS 21180902) aids integration into procurement systems and technical documentation for quality management. Contact Metav Werkzeuge for tailored application advice or to request availability of Teknik Makina face milling heads compatible with WNMX 09T3 inserts — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: T671TM Manufacturer: Teknik Makina ECLASS: 21180902 Product designation: Planmesserkopf for WNMX 09T3 Indexable Inserts Dimensions & core data Diameter: 63 mm Overall length: 40 mm Shank / interface diameter: 22 mm Weight: 0.542 kg Cutting edges: 6 Features & compatibility Compatible inserts: WNMX 09T3 Compatible insert manufacturer: Korloy Torx screw: M3x7 Torx key size: T8 FAQ Is this milling head compatible with Korloy WNMX 09T3 inserts? Yes. The face milling head (SKU T671TM) is specified for WNMX 09T3 indexable inserts and has confirmed compatibility with Korloy plates. Which screw and key are required to clamp the insert? Insert clamping uses an M3x7 Torx screw; a T8 Torx key is required to tighten or loosen the screw. What are the key dimensions of the cutter head? The cutter has a Ø63 mm body, a 22 mm shank/interface, an overall length of 40 mm and weighs 0.542 kg. How does the number of cutting edges affect machining? The 6 cutting edges distribute cutting forces more evenly, reducing vibration and helping to achieve a steadier surface finish with less frequent insert change-out. Which toolholders will accept this head? The head is designed for a 22 mm interface; it is suitable for holders that accept a 22 mm mounting diameter. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Planing Cutter Head for ZDEW 1204 Indexable Inserts, 5 Cutting Edges, 22mm Shank - Teknik Makina
Take advantage of a compact, high-performance facing solution with Ø63 mm diameter and five cutting edges for smooth finishes; mount it on a 22 mm toolholder and rely on secure Torx fastening for quick insert changes — order via Metav Werkzeuge or consult our specialists for application advice. Planing cutter head — compact facing head Ø63 mm, 5 cutting edges (Teknik Cutting Tools) The Planing cutter head is a compact facing tool designed for ZDEW 1204 indexable inserts, ideal for precise finishing and small-batch milling where space and repeatability matter. Compact Ø63 mm diameter Five cutting edges for fine finishing 22 mm toolholder bore for secure mounting Torx M4.5x11 fastening, T15 key required Reliable precision for compact facing operations This facing head delivers consistent surface quality thanks to its Ø63 mm diameter and the arrangement of five cutting edges, which reduces vibration and distributes cutting forces evenly. The relatively low mass (approx. 0.474 kg) and an overall length of 40 mm contribute to stable running on smaller milling spindles and compact toolposts. Such stability translates into improved dimensional consistency on successive passes and a better surface finish, especially useful in jobs where repeating identical faces is required. The design supports high repeatability without added complexity, making it suitable for both maintenance workshops and production cells that prioritise process reliability. Fast, secure insert changes reduce downtime Engineered for ZDEW 1204 indexable inserts (compatible with Pramet), the head uses a Torx M4.5x11 clamping screw and a T15 key for secure, repeatable seating of each insert. The 22 mm toolholder bore (22 mm) ensures a tight fit to standard mini-arbors and quick-change adaptors, so changeover procedures are straightforward and time-efficient. Clear mechanical interfaces mean that insert replacement and re-clamping are performed with minimal adjustment, lowering machine downtime and simplifying operator routines. The compatibility with well-known insert systems makes stocking and procurement simpler for purchasing teams. Built for workshop versatility and efficient workflows With its focused specification set — compact diameter, modest overall length and standardised mounting — this head integrates easily into small-tool inventories and supports flexible machining strategies. The combination of secure Torx fastening and standardised 22 mm mounting creates a robust coupling between cutter and arbor, which helps reduce micro-movement during interrupted cuts. Where space is limited, or where a small facing diameter is required, this unit offers an economical route to high-quality face milling without bespoke tooling. The construction emphasises predictable behaviour and easy maintenance, aligning with the practical needs of craft workshops and light industrial users. For secure, compact facing with proven compatibility, choose the Teknik Cutting Tools Planing cutter head and contact Metav Werkzeuge for tailored advice and prompt supply from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: T197TM Manufacturer: Teknik Makina Name: Planing cutter head For: ZDEW 1204 indexable inserts Suitable insert manufacturer: Pramet Core specifications Diameter: 63 mm Cutting edges: 5 Overall length: 40 mm Toolholder bore: 22 mm Weight: 0.474 kg Torx screw: M4.5x11 Features Torx key: T15 Compatible with ZDEW 1204 inserts Secure clamping via M4.5x11 screw Compact design for small setups FAQ What inserts does this cutter head accept? The cutter head accepts ZDEW 1204 indexable inserts and is specified for inserts from Pramet. Which toolholder size is required for mounting? Mounting requires a 22 mm toolholder bore; the head is designed for a 22 mm arbor fit. What fastening method secures the inserts? Inserts are secured with a Torx M4.5x11 clamping screw; a T15 key is required for tightening and loosening. Is the head suitable for high-feed facing operations? The head is optimised for compact facing and finishing; its five-edge arrangement supports stable cutting in light to moderate feed applications. How compact is the unit for constrained setups? With an overall length of 40 mm and a diameter of 63 mm, the head is intended for limited-space applications and small-batch machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Round Cutter For RPMT 10T3 Indexable Inserts With Internal Coolant, 40mm L - Teknik Makina
Take advantage of the combination of compact form, internal coolant and compatibility with standard RPMT 10T3 inserts for reliable finishing performance; order directly via Metav Werkzeuge or consult our specialists for configuration advice. Face milling cutter T708-1TM — 63 mm diameter, internal coolant (Teknik Makina) The Face milling cutter T708-1TM is a compact indexable cutter engineered for precise finishing and efficient chip evacuation in small to medium milling setups. 63 mm diameter for compact operations Internal coolant for improved chip evacuation Six cutting edges for efficient material removal Compatible with RPMT 10T3 Korloy inserts Higher throughput from a compact design The 63 mm diameter milling head delivers a high material removal rate while retaining a compact footprint, ideal where space and accessibility matter. The combination of a six-edge cutting geometry and a short overall length of 40 mm reduces tool runout and vibration, which translates into steadier feeds and better surface finish. By using RPMT 10T3 indexable inserts, the system provides multiple cutting corners per insert, which shortens downtime for index changes and lowers cost per cutting edge compared with welded or single-piece cutters. The result is measurable productivity improvement in repetitive finishing tasks. Improved cooling and secure insert clamping for consistent performance Integrated internal coolant channels direct cutting fluid close to the cutting edge, supporting heat control and chip flushing at the point of contact. This feature helps maintain a stable cutting temperature and can extend insert life under continuous operation. The insert fastening uses Torx T15 drive with M3.5x8.5 screws, offering secure, repeatable clamping torque and minimised cam‑out during tightening. Together, these design choices reduce the risk of premature edge wear and contribute to more predictable machining cycles — a distinct advantage for production environments requiring repeatability. Compatibility and workshop practicality The cutter accepts RPMT 10T3 inserts from Korloy, enabling straightforward stocking of common inserts and simple retrofit into existing tool setups. With a net weight of 0.584 kg, the toolhead balances rigidity and handling convenience, making it suitable for manual tool changes as well as automated toolholders. The lightweight design lowers spindle load during acceleration and deceleration, while the robust construction supports consistent cutting forces. For shops consolidating tooling, this milling head offers a compact, efficient option that integrates with standard insert inventories. For tailored advice on configuring the Teknik Makina T708-1TM for specific materials or cycle times, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the optimal setup for a reliable production workflow Technical data SKU: T708-1TM Manufacturer: Teknik Makina Product type: Face milling cutter Label: 63mm Rundplattenfräser RPMT 10T3 L40mm mit Innenkühlung Facts Diameter: 63 mm Overall length: 40 mm Weight: 0.584 kg Cutting edges: 6 Torx key: T15 Torx screw: M3.5x8.5 Special features Internal coolant For RPMT 10T3 indexable inserts Compatible insert supplier: Korloy FAQ What insert type does this cutter use? The T708-1TM face milling cutter uses RPMT 10T3 indexable inserts, compatible with Korloy RPMT 10T3 grades. Is the cutter suitable for heavy roughing operations? The cutter is designed primarily for finishing and medium-duty milling; its compact 63 mm diameter and six-edge configuration favour precision and surface quality over aggressive roughing. How does internal coolant benefit machining with this cutter? Internal coolant supplies fluid directly to the cutting zone, improving chip evacuation, reducing cutting temperatures, and helping to extend the life of RPMT 10T3 inserts. Which screwdriver is required for insert changes? Insert fastening and removal use a Torx T15 drive with M3.5x8.5 screws for secure and repeatable clamping. Can the milling head be used in automated tool changers? With its standard dimensions and balanced weight, the T708-1TM is suitable for integration into automated toolholders and conventional milling spindles when the toolholder matches the cutter interface. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Round Face Mill For RCKT 1204 Indexable Inserts With Internal Coolant, 45° Cutting Angle - Teknik Makina
Combine robust machining stability from the 63 mm diameter with integrated internal coolant and compatibility with RCKT 1204 indexable inserts for reliable face milling and reduced downtime. Order the round insert milling cutter directly via Metav Werkzeuge or contact the consultants for application advice. T462-1TM Round insert milling cutter – 63 mm, internal coolant (Teknik Makina) T462-1TM round insert milling cutter designed for precise face-milling with RCKT 1204 indexable inserts, offering stability and coolant-fed performance for general machining tasks. 63 mm diameter for stable face milling For RCKT 1204 indexable inserts (Sandvik) Internal coolant for improved tool life Five cutting edges, 45° cutting angle High-capacity face milling that boosts process reliability The T462-1TM is engineered to deliver consistent material removal while maintaining run-out resistance and cutting stability. With a 63 mm diameter and a 45° cutting angle, the head balances axial and radial cutting forces to reduce chatter and improve surface finish. The presence of five cutting edges spreads cutting loads across multiple inserts, which can extend the effective lifetime between indexings and supports steady cycle times on batch and single-piece production alike. This combination translates into measurable productivity gains and predictable tool-change intervals. Integrated coolant and insert compatibility to cut downtime Built-in internal coolant channels feed cooling directly to the cutting zone, which helps evacuate chips and control cutting temperatures during demanding passes. Compatibility with RCKT 1204 indexable inserts — and acceptance of inserts from Sandvik — enables simple selection of grades and geometries to suit different materials and surface requirements. The coolant-fed design and standardised insert format reduce setup complexity, allowing maintenance routines to be completed quickly and diminishing machine idle time in productive workshops. Practical design for easy handling and workshop integration The milling head’s modest 40 mm overall length and weight of 0.436 kg make it straightforward to mount in a variety of cutter holders without significant overhang. Fastening uses a Torx T15 key and M3.5x8.5 screws for secure, repeatable clamping of the inserts; these common fasteners simplify the maintenance toolkit and spare-part logistics. The cutter’s compact footprint and standard interface support straightforward integration into existing tool inventories, helping to reduce tooling complexity on the shop floor. Reliability, support and application guidance This milling head is intended for workshops and production environments seeking a resilient solution for face milling with indexable inserts. Emphasis on proven mechanical stability and coolant-assisted cutting supports longer insert life and predictable surface quality. If uncertainty remains about grade selection or specific machining parameters, Metav Werkzeuge’s technical consultants can provide tailored application guidance and recommend insert grades for particular tasks. For coolant-fed face milling with proven insert compatibility, request the T462-1TM via Metav Werkzeuge for expert application support and efficient supply from Emmerich. Technical Data SKU: T462-1TM Label: 63mm Rundplattenfräser RCKT 1204 L40mm mit Innenkühlung Product: Round insert milling cutter Compatible inserts: RCKT 1204 Manufacturer: Teknik Makina eCl@ss: 21180902 Facts Diameter: 63 mm Overall length: 40 mm Weight: 0.436 kg Cutting edges: 5 Cutting angle: 45° Torx screw: M3.5x8.5 Special features Internal coolant: yes Compatible insert manufacturer: Sandvik Torx key: T15 For RCKT 1204 indexable inserts Product type: Round insert milling cutter FAQ Which insert type does the cutter accept? The cutter is designed for RCKT 1204 indexable inserts; insert grade and geometry should be selected according to the application and material. Does the tool support coolant-fed machining? Yes, the head features internal coolant to assist chip evacuation and temperature control at the cutting edge. What are the main dimensions and weight? The head has a 63 mm diameter, 40 mm overall length and a weight of 0.436 kg, facilitating compact mounting and low overhang. Which fasteners and tools are required for insert changes? Insert clamping uses M3.5x8.5 Torx screws and a T15 Torx key for secure, repeatable insert replacement. Is the cutter compatible with inserts from well-known brands? Compatibility with Sandvik inserts is indicated; proven insert suppliers allow selection of grades for different machining tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Round Insert Cutter for RPMW 10T3 Indexable Inserts, 6 Teeth, 22mm Shank - Teknik Makina
Get consistent high-throughput milling and predictable tool life with a 63 mm, six-edge round insert cutter featuring a 22 mm mounting bore; order directly via Metav Werkzeuge or consult our workshop specialists for integration advice. Round insert milling cutter — 63 mm, 6-edge for RPMW 10T3 (Teknik Makina) A Round insert milling cutter designed for efficient face milling operations with RPMW 10T3 indexable inserts 63 mm diameter precision cutting Six cutting edges for extended tool life 22 mm mounting bore for secure clamping Compatible with RPMW 10T3 Korloy inserts High material removal with controlled accuracy This milling head combines a compact 63 mm diameter with 6 cutting edges to deliver a balance of material removal rate and surface control. The multi-edge arrangement reduces the load per insert, which leads to a more even wear pattern and longer intervals between indexings. As a result, cycle times can be shortened without sacrificing repeatability. The design is optimised for the use of RPMW 10T3 type indexable inserts, offering straightforward insert replacement and consistent cutting geometry for applications where predictable part tolerance and surface state matter. Secure clamping and straightforward maintenance A precise 22 mm mounting bore provides a rigid interface with toolholders and reduces the risk of vibration under load, supporting stable cutting conditions. Fastening is achieved with M3.5x8.5 screws tightened with a Torx T15 key, enabling reliable clamp force and fast, repeatable changeovers during servicing. The screw-and-insert arrangement keeps maintenance time to a minimum and allows shops to replace only the worn components rather than the complete head, aiding uptime and reducing waste in the tooling lifecycle. Practical applications and efficient tooling strategy The cutter is intended for indexable insert milling workflows where quick insert changes and tool stability are priorities. Compatibility with Korloy RPMW 10T3 inserts gives access to a wide range of grades and geometries for various cutting conditions. Selecting an insert grade matched to the job material will allow the tool to deliver consistent performance and cost-efficiency while supporting a modular tooling strategy that simplifies inventory. The head’s construction supports repeatable set-ups and can be integrated into existing milling programmes with minimal adjustment. For tailored advice on integrating Teknik Makina tooling into production, contact Metav Werkzeuge for expert guidance and reliable supply from Emmerich. Technical data Article number: T708TM Manufacturer: Teknik Makina ECLASS: 21180902 ETIM: EC011860 Compatible inserts: RPMW 10T3 Facts Diameter: 63 mm Overall height: 40 mm Cutting edges: 6 Mounting bore: 22 mm Torx key size: T15 Special features Insert type: KRLY Compatible insert manufacturer: Korloy Fastening screw: M3.5x8.5 Application: indexable insert milling FAQ Which insert type does the cutter accept? The cutter accepts RPMW 10T3 indexable inserts; it is specified for KRLY-style plates and is compatible with Korloy inserts. How many cutting edges are available and what is the benefit? The head has six cutting edges, which spreads cutting forces across more edges and helps to extend the life of each insert while maintaining consistent surface quality. What is the mounting interface of the tool? A 22 mm mounting bore provides a secure connection to the toolholder, supporting rigid clamping and stable cutting conditions. Which fastening hardware is required for insert replacement? Inserts are secured with M3.5x8.5 screws tightened with a Torx T15 key for repeatable and reliable assembly. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Round Insert Face Cutter for RDMT 12T3 Indexable Inserts L40mm With Internal Cooling, 6 Teeth - Teknik Makina
Take advantage of a compact milling head that combines 63 mm diameter, internal coolant and six cutting edges for steady material removal; order the cutter directly via Metav Werkzeuge or consult our specialists for application advice. Round indexable insert face mill – 63 mm, internal coolant (Teknik Cutting Tools) The Round indexable insert face mill for RDMT 12T3 indexable inserts is engineered for efficient face milling in constrained setups, offering reliable chip control and consistent surface quality. 63 mm diameter for compact machining Internal coolant for improved chip evacuation Six cutting edges for steady material removal Compatible with RDMT 12T3 indexable inserts Increase throughput in compact setups with a balanced cutter head The compact face mill delivers a combination of rigidity and accessibility that is particularly valuable where space is limited. With a 63 mm diameter and a total length of 40 mm, the head is designed to be integrated into short overhang applications while maintaining cutting stability. The reduced projection lowers vibration, which in turn allows for higher feed per tooth and an increase in productive cutting time. This results in improved cycle reliability and a measurable uplift in machining efficiency for small- to medium-batch production runs. Controlled temperatures and chips thanks to internal coolant The inclusion of internal coolant is a decisive technical advantage for sustained cutting performance. Coolant is guided directly to the cutting zone, which reduces cutting-edge temperature and promotes more uniform wear on the insert flanks. This targeted cooling improves tool life and helps to maintain a consistent surface finish over longer tool cycles. In practice, chips are evacuated more effectively, reducing the risk of recutting and machine downtime; maintenance intervals can therefore be extended without compromising component quality. Precise clamping and service-friendly design for dependable operation A total of six cutting edges are provided via RDMT 12T3 compatible indexable inserts, giving a good balance between metal removal rate and insert economy. The head is secured with Torx T15 fastenings and M3.5x8.5 screws, enabling fast, repeatable insert changes with low risk of misalignment. The tool mass of approximately 0.512 kg and its compact geometry make handling and spindle mounting straightforward. For purchasers and operators, the clear mechanical specification and standardised fixing mean predictable process parameters and straightforward stocking of spare parts. Contact Metav Werkzeuge today for a tailored recommendation and to secure the T285-1TM face mill for immediate integration into production. Technical Data Article number: T285-1TM Product type: Round indexable insert face mill Manufacturer: Teknik Cutting Tools eClass: 21180902 Facts Diameter: 63 mm Total length: 40 mm Weight: 0.512 kg Number of cutting edges: 6 Internal coolant: yes Special features Compatible with RDMT 12T3 indexable inserts Torx key: T15 Torx screw: M3.5x8.5 SKU: T285-1TM FAQ What inserts does this cutter accept? The cutter accepts RDMT 12T3 indexable inserts; the cutter head is engineered specifically for that insert form to ensure correct seating and chip flow. Is coolant-through supported on this tool? Yes, the head features internal coolant, which is routed to the cutting zone to aid chip evacuation and reduce edge temperature during machining. What are the key dimensions for setup and tool selection? Key dimensions are 63 mm diameter and 40 mm total length; the tool mass is approximately 0.512 kg, which helps when determining spindle load and holder selection. How many cutting edges are available per cutter head? The head is equipped with six cutting edges via RDMT 12T3 indexable inserts, providing a balance between productivity and insert economy. Which fastenings are used for the inserts? Inserts are secured with Torx screws (M3.5x8.5) using a T15 Torx key to ensure repeatable clamp force and simple replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Round Insert Milling Cutter For RDMT 1604 Indexable Inserts 5 Cutting Edges, 22mm Shank Diameter - Teknik Makina
Take advantage of a compact, indexable face mill that combines precise insert compatibility and robust clamping for reliable machining results; benefit from the Ø 63 mm cutting head with five cutting edges and secure 22 mm shank for stable performance — order directly via Metav Werkzeuge or consult our specialists for specification advice. Round face mill T273TM by Teknik Makina — for RDMT 1604 indexable inserts, Ø 63 mm Round face mill T273TM designed for efficient face milling with RDMT 1604 indexable inserts, ideal where modular insert systems are preferred for quick tool changes and consistent cutting performance For RDMT 1604 indexable inserts 63 mm diameter cutting head Five cutting edges for efficient removal 22 mm shank for secure clamping Efficient machining with indexable inserts for predictable output This cutter is built around the proven principle of indexable tooling: replaceable cutting edges reduce downtime while maintaining consistent cutting geometry. The use of indexable inserts means insert changes are fast and repeatable, keeping cycle times low and machine uptime high. The Ø 63 mm cutting head with five cutting edges provides a balanced trade-off between metal removal rate and surface finish, allowing focused productivity gains in operations that rely on reliable, repeatable cuts. Secure clamping and service-friendly fastenings for stable runs Clamping and fastenings have been specified to favour workshop efficiency. The tool features a 22 mm shank for firm mounting in compatible holders, a M4x10 locking screw, and M4,5x11 Torx screws retained by a BSP010 clamp plate; assembly and insert changes are performed using a Torx T20 key. These standardised fastenings simplify inventory of spare parts and make maintenance straightforward, while the compact overall length 45 mm and modest 0.512 kg mass reduce overhang and help maintain rigidity during cutting. Compact design that supports streamlined workshop logistics A compact milling head with standardised attachment features contributes to a more efficient tooling setup: fewer specialised holders, lower stock variety, and faster changeovers. The modular nature of indexable systems supports lean stocking strategies and predictable tool life management. When integrated into a well-structured tool cabinet, this milling head helps reduce the administrative and operational friction commonly encountered with solid-tool replacements, delivering pragmatic benefits for procurement and production planning. Contact Metav Werkzeuge today for a tailored recommendation on integrating the Teknik Makina round face mill T273TM into the production line, or request personalised technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: T273TM Manufacturer: Teknik Makina Product: Round face mill for RDMT 1604 indexable inserts Facts Diameter: 63 mm Cutting edges: 5 Overall length: 45 mm Shank diameter: 22 mm Weight: 0.512 kg Special features For RDMT 1604 indexable inserts Locking screw: M4x10 Torx screw: M4,5x11 U plate: BSP010 Torx key: T20 FAQ Which inserts are compatible with the round face mill T273TM? The Teknik Makina round face mill T273TM is designed for RDMT 1604 indexable inserts and accepts inserts matching that designation. How is the cutter secured to the tool holder? The T273TM uses a 22 mm shank with a M4x10 locking screw, M4,5x11 Torx screws and a BSP010 clamp plate; Torx T20 is the recommended key for service. What are the key dimensions and mass of this cutter? The Teknik Makina T273TM has a 63 mm diameter, overall length 45 mm, 22 mm shank diameter and a mass of 0.512 kg. Are insert changes and maintenance straightforward? Yes — the modular insert system and standard Torx fastenings on the T273TM make insert replacement quick and maintenance procedures routine, reducing machine downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Round Insert Milling Cutter for RHKW 0802 Indexable Inserts, 6 Inserts, 22mm Shank - Teknik Makina
Combine consistent material removal with straightforward insert replacement: the T601TM delivers a 63 mm cutting diameter and six cutting edges for steady productivity, while compatibility with standard RHKW 0802 inserts keeps tooling flexible. Order the round indexable cutter directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. Round indexable cutter (T601TM) – Ø 63 mm, for RHKW 0802 indexable inserts by Teknik Makina The Round indexable cutter (T601TM) is designed for medium-duty milling tasks where rapid chip removal and fast insert changes are required, making it suitable for workshops and production environments that use indexable tooling Ø 63 mm cutting diameter 6 cutting edges Shank Ø22 mm For RHKW 0802 indexable inserts Torx T15 fastening M3x7 High material removal with consistent stability This cutter combines a Ø 63 mm diameter with six cutting edges to provide a stable cutting pattern and even load distribution across the tool body. The arrangement of multiple cutting edges reduces vibration and spreads cutting forces, which typically leads to improved surface finish and longer life of the indexable inserts. The result is a predictable machining process with fewer interruptions for insert changes, supporting higher machine throughput and lower per-part machining times. Secure mounting and proven compatibility Equipped with a Shank Ø22 mm and a compact overall length, the tool integrates easily into standard milling holders and arbor setups. It is expressly designed for RHKW 0802 indexable inserts and is compatible with inserts from Ingersoll, ensuring access to widely available replacement parts. A clearly defined shank diameter and standardised insert format make toolholder matching straightforward, supporting consistent concentricity and runout control in CNC operations. Fast, safe insert clamping and simple maintenance The cutter uses an M3.5 clamping screw together with an M3x7 Torx screw for each insert seat; replacement is performed with a T15 Torx key. This proven fastening arrangement allows quick insert indexing without specialised tools, minimising machine downtime. The simple screw system also supports repeatable clamping forces, which helps maintain cutting geometry and reduces the risk of unexpected insert movement during interrupted cuts. Practical workshop advantages and supply reliability By using a standard indexable format, this cutter reduces the variety of spare parts required in a busy workshop and simplifies inventory planning. The relatively low mass and compact design support agile tool changing and safe handling at the bench. Metav Werkzeuge’s philosophy of the democratisation of precision ensures that such precision tooling is available with dependable delivery from the Emmerich stocking point, backed by decades of distribution experience and an established European quality filter. Contact Metav Werkzeuge for tailored tooling recommendations and secure the Teknik Cutting Tools T601TM with matched RHKW 0802 inserts through direct supply and expert consultation Technical data Article number: T601TM Brand: Teknik Makina ECLASS: 21180902 ETIM: EC011860 Facts Cutting diameter: 63 mm Number of cutting edges: 6 Overall length: 40 mm Shank diameter (Ø): 22 mm Weight: 0.53 kg Special features For RHKW 0802 indexable inserts Compatible with Ingersoll inserts Clamping screw: M3.5 Torx screw: M3x7 Torx key size: T15 SKU: T601TM FAQ Which insert type fits the cutter? The cutter accepts RHKW 0802 indexable inserts; the T601TM is optimised for this insert form and works with Ingersoll-manufactured inserts of the same designation. What is the cutting diameter and how many edges are active? The tool has a 63 mm cutting diameter and six active cutting edges, arranged to deliver even material removal and stable cutting forces. Which shank and mounting details should be noted? The tool features a Shank Ø22 mm and a compact overall length of 40 mm; clamping is achieved via an M3.5 clamping screw and an M3x7 Torx screw using a T15 key. How does the fastening system impact maintenance? The M3.5/M3x7 screw combination with a T15 key enables quick insert changes and reproducible clamping, reducing downtime and simplifying routine maintenance. For which operations is this cutter intended? This round indexable cutter is intended for milling operations that benefit from indexable insert systems such as profiling and face milling where quick insert indexing and replaceability are priorities. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Round Insert Milling Cutter for RHKW 1003 Indexable Inserts, 6 Teeth, 22mm Shank - Teknik Makina
Take advantage of the combination of a 63 mm cutting diameter, six indexable cutting edges and a 22 mm arbor bore for stable, repeatable face milling — order the Round Insert Face Mill T606TM directly via Metav Werkzeuge or ask our consultants if needed Round Insert Face Mill T606TM — 63 mm diameter, for RHKW 1003 indexable inserts (Teknik Makina) A robust Round Insert Face Mill T606TM engineered for medium-duty face milling applications using RHKW 1003 indexable inserts, offering reliable cutting geometry and straightforward servicing 63 mm cutting diameter Six indexable cutting edges 22 mm arbor bore Compatible with RHKW 1003 inserts High material removal rates with predictable results The T606TM face mill is designed to deliver consistent chip removal across a range of medium-duty face milling tasks. With a 63 mm diameter and six cutting edges, the tool balances feed per tooth and spindle load to enable efficient metalworking cycles. The cutter geometry reduces vibration and helps to maintain surface finish, while the 22 mm arbor bore ensures secure mounting in common toolholders. For production environments the combination of cutter diameter and multiple cutting edges translates into shorter cycle times and more predictable machining results. Secure clamping and rapid indexable-insert changes Maintenance intervals are kept short thanks to clearly specified clamping components: a M3.5 clamping screw, a M4x10 Torx screw and a T15 Torx key for fast, reliable insert changes. The straightforward retention design minimises downtime during tool changes and facilitates repeatable seating of the inserts, preserving cutting geometry. Fewer interruptions for servicing means higher productive uptime and lower labour cost per component when compared with more complex fastening systems. Broad compatibility for streamlined tooling logistics This cutter is specified for RHKW 1003 indexable inserts and is listed as compatible with Ingersoll insert systems, making it suitable for workshops that standardise on those inserts. The compatibility reduces the need for multiple insert types, simplifying inventory and purchasing. At a modest mass of 0.488 kg, the tool is light enough for easy handling yet substantial enough to deliver stable machining performance when mounted on a correctly rated arbor and spindle. Practical benefits for workshop integration The T606TM integrates into established production workflows with minimal setup complexity: the 22 mm bore fits common adaptors, the insert type is widely stocked, and the tool’s geometry is optimised for repeatable results. These attributes combine to lower the entry barrier for precise face milling, making it an economical choice for small batches and serial production alike. Where productivity and predictable surface quality matter, this cutter provides a pragmatic balance of performance and ease of use. Contact Metav Werkzeuge for tailored technical advice and to arrange a supply quotation for the Teknik Cutting Tools Round Insert Face Mill T606TM — reach our Emmerich centre by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: T606TM Manufacturer: Teknik Makina Product name: Round Insert Face Mill T606TM For inserts: RHKW 1003 Indexable Inserts Compatible with inserts from: Ingersoll Facts Diameter: 63 mm Cutting edges: 6 Arbor bore: 22 mm Overall length: 40 mm Weight: 0.488 kg Clamping screw: M3.5 Torx screw: M4x10 Special features Torx key size: T15 Designed for indexable-insert face milling Reduced-changeover fastenings for quick insert replacement Balanced geometry for stable cutting FAQ What insert type is required for this face mill? The face mill is specified for RHKW 1003 indexable inserts; compatible inserts from Ingersoll may also be used. Which arbor size is needed to mount the cutter? The cutter uses a 22 mm arbor bore, compatible with standard 22 mm adaptors and toolholders. How many cutting edges does the tool have and what is the benefit? The cutter features six cutting edges, which helps distribute chip load, increase material removal rate and improve surface finish consistency. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Round Insert Milling Cutter for RHKW 1204 Indexable Inserts, 6 Teeth, 45mm Overall Length - Teknik Makina
Benefit from a reliable combination of sturdy clamping, high material removal rate and fast insert changes for uninterrupted milling cycles; order the Teknik Makina round insert milling cutter directly via Metav Werkzeuge or consult our specialists for application advice. Round insert milling cutter T614TM — Ø63 mm, 6 cutting edges | Teknik Makina Round insert milling cutter T614TM designed for indexable milling with RHKW 1204 inserts, ideal for high-efficiency face and shoulder operations where quick insert changes and stable cutting are required Ø63 mm diameter for stable engagement 6 cutting edges for steady material removal 22 mm shank for secure clamping Compatible with RHKW 1204 indexable inserts Greater throughput through optimised cutter geometry The Ø63 mm body with 6 cutting edges delivers a balance between stock removal and surface quality. The multiple cutting edges distribute cutting forces and reduce chip load per edge, which improves feed stability and lowers the risk of chatter in many milling setups. Designed for indexable tooling, this cutter accepts RHKW 1204 inserts, enabling short tool-change routines and consistent cutting performance. The combination of insert interchangeability and robust cutter diameter supports higher cumulative material removal per tool life cycle, making the tool suitable for repetitive production runs and mixed-batch machining. Secure fastening for reduced vibration and longer component life Clamping integrity is central to predictable results. The cutter employs a M3.5 clamping screw and a retention screw M4x10, tightened with a T15 Torx key to ensure secure seat of the insert and minimised micro-movement during cutting. A 22 mm shank provides a firm toolhold in standard holders, improving concentricity and reducing runout that shortens insert life. By limiting unwanted movement at the cutting edge, the design contributes to repeatable tolerances and fewer rejects in serial production, translating into lower process costs and less rework. Seamless integration into indexable milling workflows This indexable face cutter is intended for straightforward integration into existing milling processes where indexable inserts are preferred for fast service and repeatable geometry. The tool’s compatibility with Ingersoll-type inserts and the standardised screw/key arrangement reduce setup time and spare-part complexity at the tool crib. Supplied and supported via Metav Werkzeuge, the cutter benefits from a European distribution network that emphasises dependable stock levels and application support — an asset when maintaining uninterrupted production. For bespoke fixture or process questions, technical consultation is available to ensure the milling solution meets the required cycle and component specifications. Contact Metav Werkzeuge for tailored machining advice and to secure the Teknik Makina round insert milling cutter T614TM with Ø63 mm and RHKW 1204 compatibility — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: T614TM Manufacturer: Teknik Makina Description: Round insert milling cutter for RHKW 1204 indexable inserts Compatible inserts: RHKW 1204 Facts Diameter: 63 mm Cutting edges: 6 Shank diameter: 22 mm Overall length: 45 mm Weight: 0.556 kg Special features Clamping screw: M3.5 Retention screw: M4x10 Torx key: T15 Compatible with Ingersoll inserts FAQ Which inserts fit this cutter? The cutter accepts RHKW 1204 indexable inserts; compatibility with Ingersoll-type inserts is stated for the T614TM. What fastening hardware is used? Clamping uses a M3.5 screw with a retention screw M4x10, tightened with a T15 Torx key as specified for the T614TM. What are the main dimensions of the tool? Key dimensions: Ø63 mm diameter, 22 mm shank and 45 mm overall length; weight is 0.556 kg. Is the cutter suitable for series production? The design of the tool supports indexable milling operations where fast insert changes and consistent cutting performance are required, making it appropriate for repeated production tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Square Head for LNMX 1006 Indexable Inserts L45mm With Internal Coolant, T8 Torx Screw M3x7 - Teknik Makina
Take advantage of the combination of stable cutting performance, straightforward insert compatibility and integrated coolant management for reliable angular machining. Order the component directly via Metav Werkzeuge or consult our advisors for specification matching. Corner cutting head T388-1TM – 63 mm diameter, internal coolant, for LNMX 1006 indexable inserts by Teknik Makina Corner cutting head designed for LNMX 1006 indexable inserts, intended for precise angular machining and reliable tool changes in turning and light milling operations. 63 mm diameter for stable engagement Internal coolant for improved chip evacuation Compatible with LNMX 1006 Korloy indexable inserts Greater cutting stability for angular operations The Corner cutting head delivers consistent engagement at a defined 90° cutting angle, supported by a 63 mm body diameter that reduces deflection during entry and exit cuts. The combination of a robust geometry and six cutting edges enables steady chip formation and predictable tool behaviour, which directly improves surface finish and reduces rework. The integrated internal coolant directs fluid to the cutting zone, assisting heat control and chip evacuation; this reduces flank wear and extends the service intervals of indexable inserts without complicating cycle planning. Faster retooling and inventory clarity The head is engineered for straightforward compatibility with LNMX 1006 indexable inserts from Korloy, simplifying spare-part lists and enabling quicker insert changes on the shop floor. A standard T8 Torx fixation with M3x7 screws ensures reproducible clamping torque and repeatable seating of the insert pockets. These features shorten downtimes during regrip and changeovers, making tool management more economical and predictable for production or maintenance teams that aim to keep throughput steady. Durable design that supports operational efficiency At a length of 45 mm and a mass of 0.495 kg, the indexable head balances rigidity with manageable tool overhang, suitable for many bench and turret applications where angular cutting is required. The construction accommodates even wear across the six available cutting positions, so insert rotation and replacement are efficient and cost-conscious. Combined with the internal coolant channeling, the result is a component that lowers total machining cost per part while maintaining repeatable dimensional results in series production. Discuss Teknik Makina tooling compatibility and delivery options with Metav Werkzeuge — contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 to ensure the T388-1TM fits the intended application and inventory strategy Technical Data Article number: T388-1TM Eclass: 21181015 Label: 63mm Eckmesserkopf LNMX 1006 L45mm with internal coolant Facts Diameter: 63 mm Overall length: 45 mm Weight: 0.495 kg Cutting angle: 90° Cutting edges: 6 Special features Internal coolant Compatible with LNMX 1006 indexable inserts Suitable for Korloy insert manufacturer Torx screw: M3x7, Torx key: T8 Manufacturer: Teknik Makina FAQ What insert type fits this head? The corner cutting head accepts LNMX 1006 indexable inserts; compatibility with Korloy-manufactured inserts is specified for the T388-1TM design. Does the head provide coolant supply to the insert tip? Yes, the T388-1TM includes internal coolant routing to aid chip evacuation and temperature control at the cutting edge. How many usable cutting positions are available? The indexable head is designed with six cutting edges, allowing for multiple indexings before an insert change is required. Is the clamping hardware standardised? Clamping uses a Torx screw (M3x7) operated with a T8 key to ensure consistent torque and secure seating of the insert. What are the primary benefits in production use? The tool head offers stable engagement through its 63 mm diameter and 90° geometry, combined with coolant support and simple insert changes for reduced downtime and improved process reliability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Square Tool Holder For R390-11T3 Indexable Inserts, 90° Cutting Angle, M2.5x7 Torx Screw - Teknik Makina
Combine the 90° cutting geometry, firm 22 mm shank interface and Sandvik insert compatibility for dependable shoulder turning and facing operations; benefit from quick insert changes and consistent repeatability. Order directly via Metav Werkzeuge or consult our specialists for selection guidance. Corner tool head — square turning head for R390-11T3 indexable inserts by Teknik Makina, 90° cutting geometry Corner tool head designed as a compact turning head for precise shoulder cuts and facing, compatible with R390-11T3 indexable inserts and engineered for stable clamping in standard turret systems For R390-11T3 indexable inserts 90° cutting angle for accurate shoulders 22 mm shank diameter for stable clamping Torx M2.5x7 screw, T8 key required Rigidity and geometry for consistent precision The compact turning head delivers a 90° cutting angle that simplifies shoulder turning and facing operations by providing a defined contact geometry. Thanks to the 22 mm tool interface and a diameter of 63 mm, the design reduces deflection and vibration during cuts, improving surface finish and repeatability. This structural stability translates into fewer reworks and a higher first-pass yield for batch turning tasks, while the inclusion of a standardized fixing screw ensures consistent clamping force and predictable tool behaviour on the machine. Fast compatibility and straightforward setup Engineered for use with R390-11T3 indexable inserts, the head accepts widely available Sandvik insert formats, enabling quick insert changes and easy stock management. The supplied Torx fastening (M2.5x7) and T8 key requirement make insert replacement and maintenance straightforward on the shop floor, reducing downtime. Clear mechanical compatibility with common turret systems means retrofitting is uncomplicated; the result is a rapid return to production and fewer setup iterations when switching between operations. Workshop resilience and practical benefits At just over 0.5 kg and with a total length of 40 mm, the unit balances compactness with robustness for everyday workshop use. The construction prioritises stable clamping and long-term durability to withstand standard turning cycles. Compatibility with Sandvik inserts supports flexible tool management and keeps toolholding costs predictable. For production environments seeking reliable, no-nonsense tooling, this turning head offers a technically sound option that supports consistent part quality and straightforward inventory control. For reliable high-precision turning choose Teknik Makina’s corner tool head (T579TM) — contact Metav Werkzeuge for tailored advice and fast supply from Emmerich. Technical data Article number: T579TM Manufacturer: Teknik Makina Compatible inserts: R390-11T3 (Sandvik) Core measurements Diameter: 63 mm Total length: 40 mm Shank diameter / clamping interface: 22 mm Weight: 0.503 kg Cutting edges: 7 Cutting angle: 90° Special features and compatibility Torx screw: M2.5x7 Torx key: T8 Designed for R390-11T3 indexable inserts Compatible with Sandvik insert systems FAQ How is the tool head fixed in the turret? The turning head locates on a 22 mm interface and is secured with the Torx M2.5x7 screw; follow machine manufacturer clamping practices to ensure correct seating. The T579TM designation identifies the specific head model for ordering and replacement. Which inserts fit this turning head? This head is built for R390-11T3 indexable inserts, compatible with Sandvik insert geometries, allowing use of common grades and chipbreakers suited to the application. What operations suit the 90° geometry? A 90° cutting angle is ideal for shoulder turning and facing where a square shoulder and precise axial positioning are required; the geometry helps produce consistent fillet transitions and nominal faces. How does the shank diameter affect performance? The 22 mm shank diameter increases rigidity at the tool-to-holder interface, reducing deflection under cutting loads and improving surface finish and dimensional stability during medium-duty turning cycles. What maintenance is recommended for the screw and clamping area? Regular inspection and cleaning of the screw seat and mating surfaces is advised; tighten using the T8 key to the workshop’s prescribed torque practice and replace the M2.5x7 screw if thread damage is observed. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Square Turning Head for WNMU 0806 Indexable Inserts With Internal Coolant, 90° - Teknik Makina
Benefit from a robust combination of a 90° cutting angle, internal coolant and compatibility with WNMU 0806 indexable inserts for precise, reliable turning results; purchase directly via Metav Werkzeuge or consult our specialists for integration advice. Angle cutting head for WNMU 0806 indexable inserts — 63 mm, internal coolant (Teknik Makina) An angle cutting head designed for 90° turning tasks, compatible with WNMU 0806 indexable inserts and optimised for coolant-fed operations in industrial turning applications. 63 mm diameter for stable turning operations Internal coolant for improved chip evacuation Compatible with WNMU 0806 (Kyocera) inserts Four cutting edges for extended tool life Precision turning with a reliable 90° geometry The angle cutting head delivers a true 90° cutting angle, which ensures predictable tool engagement and consistent tool path control on facing and shoulder operations. The defined geometry reduces radial runout and enables repeatable manufacturing tolerances, so cycle times become more consistent and setups require less rework. For users unfamiliar with angle-head terminology: a 90° cutting angle means the cutting edge meets the workpiece perpendicularly, improving surface finish and simplifying fixture alignment. This stability is particularly beneficial when machining components where perpendicular faces and clean shoulders are required. Integrated coolant to reduce thermal distortion and interruptions This tool features internal coolant, channelled directly to the insert pocket, which actively cools the cutting zone and helps evacuate chips from the cutting edge. The result is reduced cutting temperatures, lower risk of built-up edge and extended insert life. From a productivity standpoint, coolant-fed toolholders typically allow higher feed rates and longer uninterrupted running periods, translating into fewer tool changes and less downtime. Describing the technical effect plainly: coolant delivered to the insert contact zone modulates heat and removes chips, which preserves the tip geometry and reduces the need for premature index changes. Wide compatibility minimises inventory complexity Compatibility with WNMU 0806 indexable inserts — specifically those from Kyocera — means the holder integrates with widely stocked carbide inserts, easing procurement and standardising tooling across machines. The acceptance of the common insert format supports both roughing and finishing grades, so the same holder can be adapted for diverse tasks by changing the insert grade rather than the entire toolhead. This approach lowers inventory costs and accelerates tooling decisions on the shop floor, while providing flexibility for varied materials and cutting conditions. Practical features that simplify workshop handling Designed with four usable cutting edges and secured using an M5x12 torx screw (Torx key T20), the holder balances rapid serviceability with secure clamping. The compact overall length and a 63 mm head diameter offer a good balance between rigidity and accessibility in confined setups. Weighing 0.556 kg and supplied with a 22 mm shank diameter, the component fits common turret and toolpost systems without excessive overhang. These practical dimensions reduce vibration potential and make the holder a pragmatic choice for mixed-production environments where setup speed and machine stability matter. For technical queries, compatibility checks or order arrangements for Teknik Makina’s T544-1TM angle cutting head, contact Metav Werkzeuge in Emmerich by phone on +49 2822 7131930 or by email at info@metav-werkzeuge.com to discuss delivery and application suitability Technical data SKU: T544-1TM Manufacturer: Teknik Makina ECLASS: 21181015 Core specifications Diameter: 63 mm Overall length: 46 mm Shank diameter: 22 mm Weight: 0.556 kg Cutting angle: 90° Number of cutting edges: 4 Features & compatibility Internal coolant Compatible with WNMU 0806 indexable inserts (Kyocera) Torx key: T20 Torx screw: M5x12 Product type: Angle cutting head FAQ What insert type fits this holder? The holder accepts WNMU 0806 indexable inserts; Kyocera WNMU 0806 grades are compatible with the T544-1TM. Is the coolant supply internal or external? Coolant is delivered internally to the insert pocket, providing cooling and chip evacuation directly at the cutting edge. Which shank diameter is required for installation? The toolhead uses a 22 mm shank diameter suitable for compatible turrets and toolposts. How many times can an insert be indexed? An indexable WNMU 0806 insert provides four cutting edges before replacement or regrinding is required. What fastening hardware is used for the insert? Clamping is achieved with an M5x12 Torx screw tightened with a T20 key. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Toolholder Indexable Insert Holder For TPKN 1603, 90° Cutting Angle, M6x17 Fixing - Teknik Makina
Take advantage of a compact, hard-wearing solution that combines precise 90° profiling with simple, secure clamping. The combination of compatibility with TPKN 1603–2204 indexable inserts and a standard 22 mm shank ensures quick integration into existing turn setups — order or consult via Metav Werkzeuge for reliable supply and expert advice. Corner tool head (Eckmesserkopf) — Angle tool head for TPKN 1603-2204 indexable inserts, 90° cutting angle (Teknik Makina) Corner tool head (Eckmesserkopf) for right-angle profile turning and finishing on lathes, designed for use with TPKN 1603–2204 indexable inserts in industrial turning applications Compatible with TPKN 1603-2204 inserts 90° cutting angle for profile turning 22 mm shank diameter for standard holders Secured with M6x17 hex screw and 4 mm Allen key Consistent 90° profiles for repeatable production quality The compact corner tool head delivers a true 90° cutting angle, making it suitable for producing square shoulders and consistent profiles on turned components. Using standard TPKN 1603–2204 indexable inserts reduces process variability: the insert geometry determines the cutting trace, while the head maintains rigid positioning. For operations where reproducibility and low set-up time matter, the combination of defined insert size and fixed cutting angle helps to shorten inspection cycles and reduce scrap rates, supporting steady production output with fewer tool changes. Fast, secure clamping that reduces downtime Designed for straightforward mounting, the head is fixed with an M6x17 hex screw and requires a 4 mm Allen key for insert clamping, which enables rapid insert changes without specialised tools. The 22 mm shank matches common toolholder standards, allowing immediate installation into many turret and toolblock systems. The compact dimensions — 63 mm diameter and 44 mm overall length — together with a mass of 0.463 kg, contribute to a low moment of inertia and improved rigidity during light-to-medium turning, which helps to maintain surface finish and dimensional tolerance during typical workshop tasks. Compact design for versatile lathe setups and efficient handling A small footprint simplifies access to tight tool positions and makes the head a practical choice for multi-tool turrets and constrained setups. The head’s geometry supports quick indexable insert alignment and repeatability between tool stations, which benefits short-run production and prototyping alike. Paired with the right inserts, this solution provides a balance between operational flexibility and machining economy, allowing maintenance of throughput without sacrificing process stability. For procurement and logistics, Metav Werkzeuge’s supply from Emmerich provides consistent availability and a quality filter for the European market. For secure, right-angle turning tasks, request the Teknik Makina corner tool head (SKU T118TM) through Metav Werkzeuge — Metav’s advisors can confirm fitment and arrange prompt delivery from Emmerich. Technical data Article number: T118TM Manufacturer: Teknik Makina Designation: Eckmesserkopf / Corner tool head Application: for TPKN 1603-2204 Indexable Inserts Core data Diameter: 63 mm Shank diameter (mount): 22 mm Overall length: 44 mm Cutting angle: 90° Number of cutting edges: 3 Weight: 0.463 kg Features & mounting Secured with M6x17 hex screw Requires 4 mm Allen key Compatible with TPKN 1603 inserts SKU: T118TM FAQ What inserts fit this corner tool head? The corner tool head is compatible with TPKN 1603–2204 indexable inserts, as specified for the T118TM head by Teknik Makina. What is the cutting angle and what does it mean in practice? The head provides a 90° cutting angle, which is ideal for producing square shoulders and right-angle profiles where predictable geometry and repeatable edge positions are required. How is the insert secured in the head? Insert retention is achieved using an M6x17 hex screw; a 4 mm Allen key is used for tightening and replacement. What are the mounting dimensions for the toolholder? Mounting requires a toolholder that accepts a 22 mm shank; the head’s compact 63 mm diameter and 44 mm overall length suit constrained turret positions. Is the T118TM suitable for compact turret setups? Yes, the T118TM corner tool head’s compact design and modest mass (0.463 kg) make it well suited to multi-tool turrets and tight lathe stations where access and rigidity are important. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Turning Tool Head 90° For LNGX 1307 Indexable Inserts M4x10 Torx T15, 22mm Shank, 45mm Overall Length - Teknik Makina
High-precision corner turning is achieved by combining a stable clamping concept with a compact profile and compatibility for standard indexable inserts; the combination of the 90° cutting angle, secure Torx M4x10 fixing and the compact Ø63 mm body supports consistent part geometry and reduced set-up time. Order the corner tool head directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Eckmesserkopf T492TM — Corner tool head, 90° cutting angle, Ø63 mm (Teknik Makina) The Eckmesserkopf T492TM is a compact corner-turning head designed for use with LNGX 1307 indexable inserts in precision turning and profiling tasks on lathes and turning centres. *Compact Ø63 mm body for tight toolposts *Compatible with LNGX 1307 indexable inserts *Secure Torx M4x10 fixing; T15 key interface *Precise 90° cutting angle; six cutting edges Consistent geometry through a true 90° cutting angle The rigid design centres on a 90° cutting angle that stabilises the cutting direction and reduces the need for corrective reworking. With six cutting edges, the head enables repeatable corner radii and predictable chip flow, which in turn supports consistent surface finish and dimensional control. For workshops that value first-pass accuracy, this configuration reduces inspection loops and shortens cycle time. Fast, secure insert changes minimise downtime The clamping system uses a Torx M4x10 screw and a T15 key interface for quick and reliable indexable insert replacement. Compatibility with LNGX 1307 inserts — widely available from Walter and other manufacturers — simplifies inventory management and allows rapid changeovers. The straightforward fastening procedure supports fast maintenance intervals and a low risk of incorrect seating. Compact footprint with robust mounting and balance A compact Ø63 mm head and an overall length of 45 mm combine with a 22 mm mounting diameter to fit small toolposts while retaining rigidity. At approximately 0.56 kg, the unit balances mass and stiffness for stable cutting under typical turning loads. This compact construction is advantageous for confined setups where tool clearance and unobstructed chip evacuation are essential. Clear application scope and practical handling Designed primarily for corner and profiling operations with indexable inserts, the head is suitable for standard turning cycles where insert interchangeability and positional accuracy are required. An indexable insert system means the cutting edge can be renewed without regrinding the tool, which lowers tooling cost per part while maintaining machining quality. For clarification on machine compatibility or specific machining strategies, Metav Werkzeuge provides application support and selection advice. For application advice or a tailored quotation for the Teknik Makina Eckmesserkopf T492TM, contact Metav Werkzeuge—email info@metav-werkzeuge.com or call +49 2822 7131930 for local supply from Emmerich. Technical data SKU: T492TM Manufacturer: Teknik Makina Product name: Eckmesserkopf For inserts: for LNGX 1307 Indexable Inserts Compatible insert manufacturer: Walter Facts Diameter: 63 mm Overall length: 45 mm Mounting diameter: 22 mm Weight: 0.56 kg Cutting angle: 90° Cutting edges: 6 Special features Torx screw: M4x10 Torx key size: T15 Compatible inserts: LNGX 1307 Application: Corner turning with indexable inserts FAQ Which indexable inserts fit this turning head? The Eckmesserkopf T492TM is designed for LNGX 1307 indexable inserts; these inserts are compatible with the clamping geometry and ensure correct seating and performance. What fastening tools are required for insert changes? Insert clamping and release use a Torx M4x10 screw tightened with a T15 key to guarantee secure fixation and repeatable seating. Will the head fit small toolposts and tight setups? The compact Ø63 mm body with a 22 mm mounting diameter and 45 mm overall length is intended for installations with restricted clearance while maintaining rigidity. How many cutting edges are available before replacement? The head presents six cutting edges via the insert system, extending time between indexings and reducing tooling change frequency. Is the Eckmesserkopf T492TM suitable for general profiling and finishing? Yes — the combination of a fixed 90° cutting angle and indexable insert use makes the head well suited to both profiling and finishing passes where consistent geometry is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; eMail: info@metav-werkzeuge.com
63mm Turning Tool Head for XNKT 0805 Indexable Inserts, 90° Cutting Angle, M4x10 Torx - Teknik Makina
Take advantage of a compact turning solution that combines precise 90° shoulder machining with secure 22 mm mounting — the design reduces set-up time while extending insert service intervals. Order the corner turning head directly via Metav Werkzeuge or contact the consultants for tailored advice. Eckmesserkopf T904TM — Corner turning head, 90° cutting angle, 22 mm shank (Teknik Makina) The Eckmesserkopf T904TM is a corner turning head for XNKT 0805 indexable inserts, engineered for square-shoulder turning and short overhangs in precision lathe work Corner turning head for XNKT 0805 inserts 22 mm shank diameter for secure mounting 90° cutting angle for square shoulder turning Compatible with Korloy inserts and M4x10 fixing Secure mounting for consistent surface quality The head is designed around a 22 mm shank and a substantial 63 mm diameter, giving a stable interface with the toolholder and reducing flex under load. The fixing uses an M4x10 Torx screw tightened with a T15 key, which concentrates clamping force and improves repeatability at each tool change. With a mass of 0.575 kg, the assembly balances rigidity and manageable handling for workshop set-ups. These dimensional choices lead to fewer vibrations and a more consistent finish on the workpiece, so cycle times remain predictable and rework is reduced. Efficient use of indexable inserts for longer uptime Built for the XNKT 0805 family of indexable inserts and compatible with Korloy inserts, the head supports multi-edge inserts to extend cutting life between interventions. The 90° cutting angle is optimised for square-shoulder turning and accurate shoulder faces, allowing straightforward machining strategies and simple toolpath planning. With 6 cutting edges indicated, insert indexing frequency is reduced, which lowers downtime and contributes to a more economical toolroom workflow. The combination of insert standardisation and durable mechanical design promotes consistent part quality across batches. Compact geometry that suits confined toolposts A short overall length of 45 mm and the compact head profile make the unit suitable where overhang must be kept to a minimum. The compact layout helps maintain stiffness close to the cutting zone, improving dimensional control in finishing passes. The design is readily integrated into typical lathe turrets and custom fixtures that accept a 22 mm shank, enabling quick retrofitting without major changes to existing tool arrangements. The relatively small footprint also aids storage and logistics on the shop floor, contributing to efficient workshop organisation. For solid, square-shoulder turning with reliable insert compatibility, request the Teknik Cutting Tools corner turning head via Metav Werkzeuge — Metav Werkzeuge’s specialists are available at info@metav-werkzeuge.com or +49 2822 7131930 to advise on integration and selection Technical data SKU: T904TM Name: Eckmesserkopf for XNKT 0805 Indexable Inserts Manufacturer: Teknik Makina eClass: 21180902 Facts Shank diameter: 22 mm Head diameter: 63 mm Cutting angle: 90° Number of cutting edges: 6 Overall length: 45 mm Weight: 0.575 kg Torx screw: M4x10 Torx key: T15 Compatibility & features Compatible inserts: XNKT 0805 Compatible insert manufacturer: Korloy Designed for square-shoulder turning Compact design for reduced overhang FAQ What insert type fits the turning head? The turning head accepts XNKT 0805 indexable inserts; Korloy-specified XNKT 0805 inserts are compatible with the head. Which shank diameter is required for mounting? Mounting requires a 22 mm shank interface; the T904TM is specified for holders that accept a 22 mm diameter. What is the cutting geometry of the tool head? The head is configured for a 90° cutting angle, making it suitable for accurate square-shoulder turning operations. How is the insert secured to the head? The insert is retained using a fixing system that employs an M4x10 Torx screw tightened with a T15 key for reliable clamping. What are the compact dimensions and workshop benefits? With a 63 mm head diameter and 45 mm overall length, the design reduces overhang and improves rigidity in confined toolholding arrangements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Turning Tool Holder 90° For LNMT 1306 Indexable Inserts M4x10 Torx T15 - Teknik Makina
Take advantage of a robust combination of precise 90° geometry and standardised clamping to ensure repeatable shoulder turning and quick insert changes. Order the tool directly via Metav Werkzeuge or consult our specialists for application advice and supply from Emmerich. Eckmesserkopf — 90° indexable turning head for LNMT 1306 inserts by Teknik Makina The Eckmesserkopf is a compact 90° indexable turning head designed for square-shoulder and facing operations with LNMT 1306 indexable inserts, suitable for use where secure clamping and short overhangs are required Compatible with LNMT 1306 indexable inserts 90° cutting angle for square shoulder cuts 22 mm holder diameter for secure clamping Torx M4x10 screw with T15 key quick fastening Repeatable 90° results through precise geometry and compatibility The turning head is engineered around a 90° cutting angle, providing unambiguous geometry for square shoulder and facing operations. With direct compatibility with LNMT 1306 indexable inserts and recognition of ISCAR as a matching insert manufacturer, the design removes uncertainty at tool selection and reduces setup time. The compact dimensions and standardised interfaces translate into consistent tool positioning, which in turn supports tighter tolerance control and fewer rejected parts in serial production. Secure clamping and straightforward indexable insert changes Clamping is executed via a dedicated Torx fastener, specified as M4x10 and operable with a T15 key, delivering reliable fixation without complex procedures. This straightforward fastener system shortens changeover time and lowers the likelihood of incorrect seating, so tool changes become a predictable, low-risk activity. The 22 mm shank diameter ensures a close fit in standard holders, improving rigidity and reducing vibration during cut engagement for a cleaner surface finish and longer insert life. Compact design that suits shop floors and production centres With an overall length of 40 mm and a head diameter of 63 mm, the toolholder offers a compact footprint that is advantageous in confined toolpost arrangements. The assembly weight of 0.596 kg contributes to manageable inertia while maintaining the mass needed for stability. The head provides seven cutting edges, enabling a range of cutting orientations and making the component a versatile option for turning and facing tasks where a compact, stable solution is preferred. For workshops looking to centralise tooling choices, this turning head simplifies inventory by matching a widely used insert format. For Teknik Cutting Tools quality and dependable 90° turning performance, contact Metav Werkzeuge in Emmerich for ordering and technical consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: T229TM Manufacturer: Teknik Makina Product name: Eckmesserkopf For inserts: LNMT 1306 Indexable Inserts Compatible inserts manufacturer: ISCAR Core specifications Diameter: 63 mm Shank / holder diameter: 22 mm Overall length: 40 mm Weight: 0.596 kg Cutting angle: 90° Cutting edges: 7 Features Torx screw: M4x10 Torx key size: T15 Designed for square shoulder and facing operations Compact footprint for tight toolpost arrangements FAQ Which inserts fit this turning head? The Eckmesserkopf is designed for LNMT 1306 indexable inserts and is listed as compatible with inserts from ISCAR; confirm insert geometry before ordering. How is the toolhead secured in the holder? Clamping uses a Torx fastener specified as M4x10, tightened with a T15 key for secure fixation and reliable repeatability. Is this tool suitable for shoulder turning at 90°? Yes, the head’s 90° cutting angle is intended specifically for square-shoulder and facing operations, giving predictable contact geometry. What are the main dimensions to check for toolpost fitment? Key dimensions are 63 mm head diameter, 22 mm shank diameter and 40 mm overall length; these determine clearance and rigidity in the toolpost. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Turning Tool Holder 90° For LNMX 1006 Indexable Inserts 6 Cutting Edges, 22mm Shank - Teknik Makina
Take advantage of a compact, purpose-built solution that combines compatibility with LNMX 1006 indexable inserts, a rigid 90° cutting geometry and straightforward mounting for reliable corner turning. Order or request application advice directly via Metav Werkzeuge or consult the technical team for integration support. Corner tool head — 90° turning head for LNMX 1006 indexable inserts by Teknik Makina The Corner tool head is a precision turning head designed for 90° corner and face turning operations, suited to LNMX 1006 indexable inserts and engineered for stable clamping in compact tool setups. For LNMX 1006 indexable inserts 90° cutting angle for square turning 22 mm tool shank diameter Secured with M3x7 Torx screw Stable clamping and precise insert compatibility for consistent results The tool head is made to accept LNMX 1006 indexable inserts (compatible with Korloy) and retains them securely with an M3x7 Torx screw tightened using a T8 key. This configuration reduces insert movement and repeatability errors during short overhang operations. The 90° cutting geometry provides a defined approach for square and corner turning, simplifying setup and enabling predictable cutting forces. By using standard indexable insert formats, tool changeovers are rapid and repeatable, which supports consistent cycle times and reduced downtime. Compact dimensions that limit vibration and support rigid machining A compact design—notably a 22 mm shank diameter, 63 mm head diameter and 45 mm overall length—helps to minimise leverage and improve stiffness in the holder assembly. Reduced overhang and a balanced mass (approx. 0.495 kg) lower the risk of chatter when performing short-reach operations. These measurable characteristics favour stable finishing and accurate dimensional control where stiffness and minimal deflection are essential. The reduced footprint also assists in crowded turret stations or where multiple tool stations must be arranged closely. Practical handling, maintenance and integration into production workflows The head is supplied for direct mounting and easy servicing: replacement of the insert is performed via the Torx screw, while the compact form factor speeds up storage and interchange. The head’s construction suits routine workshop maintenance and supports lean inventory management by using the common LNMX 1006 insert family. Clear mechanical data—shank size, head diameter, fastening type—makes it straightforward to verify compatibility with existing tool posts and turret systems prior to installation. Documentation of these parameters facilitates spare-part planning and helps to standardise tooling across similar machining tasks. Contact Metav Werkzeuge for tailored application advice and to secure the Teknik Cutting Tools corner tool head (SKU T388TM) for integration into existing turning setups Technical Data Article number: T388TM Manufacturer: Teknik Makina Diameter (head): 63 mm Shank diameter: 22 mm Overall length: 45 mm Weight: 0.495 kg Cutting angle: 90° Number of cutting edges: 6 Compatible inserts: LNMX 1006 Suitable insert manufacturer: Korloy Fastening screw: M3x7 (Torx) Required Torx key: T8 ECLASS: 21181015 FAQ Which indexable inserts fit this turning head? The head is designed for LNMX 1006 indexable inserts and is compatible with inserts from Korloy, ensuring standardised replacement and predictable cutting geometry. What fastening hardware and tool are required for insert changes? Insert clamping is performed with an M3x7 Torx screw; a T8 Torx key is used to secure and release the insert during maintenance. What are the key dimensions for machine integration? Key dimensions are a 22 mm shank diameter, 63 mm head diameter and 45 mm overall length, providing the data needed to confirm fit in turrets and holders. For which operations is this head most suitable? The 90° cutting angle and compact form make it ideal for corner and square turning operations where stiffness and short overhang are priorities. What is the product SKU for ordering or referencing? The item is listed as SKU T388TM, which can be quoted when requesting technical details or preparing spare-part lists. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm Turning Tool Holder for WNMU 0806 Indexable Inserts, 90° Cutting Angle, M5x12 Torx Clamp - Teknik Makina
Benefit from a rigid 22 mm shank, a defined 90° cutting angle and broad compatibility with WNMU 0806 indexable inserts to secure consistent shoulder turning and short setup times; order the Corner Tool Head directly via Metav Werkzeuge or ask our consultants if needed. Corner Tool Head T544TM — 90° cutting angle, Ø63 mm (Teknik Makina) Corner Tool Head T544TM for WNMU 0806 indexable inserts, engineered for precise shoulder and external turning in workshop and production environments 90° cutting angle for accurate shoulder turning Fits WNMU 0806 indexable inserts (Kyocera) 22 mm shank for rigid clamping Torx M5x12 fastening, T20 key required Precise shoulder turning with dependable indexable inserts The Corner Tool Head T544TM is designed around a 90° cutting angle that delivers true shoulder faces and controlled external turning. Paired with standard WNMU 0806 indexable inserts, the holder translates insert geometry into predictable cutting results, reducing rework and inspection time. This configuration is particularly advantageous where repeatable right‑angle features are required and where consistent tool orientation shortens cycle variability. Stable clamping and compact tool geometry for process reliability A 22 mm shank and a head diameter of Ø63 mm provide the necessary stiffness to resist chatter during interrupted cuts. The compact 46 mm overall length minimises overhang, improving rigidity and tool life in tight setups. The tool’s mass of 0.556 kg balances robustness and manoeuvrability, contributing to stable cutting conditions and fewer tool‑change interruptions during batch production. Fast, secure insert changes to keep downtime low Secure clamping is achieved with a M5x12 Torx screw and a T20 key, enabling quick and repeatable insert changes while maintaining clamping force. The holder accommodates inserts with four cutting edges, allowing multiple indexed positions before replacement. This arrangement supports efficient shopfloor routines: shorter maintenance windows, fewer set‑up errors and a clear workflow for consumable rotation. Compatibility that simplifies procurement and tooling strategies Compatibility with Kyocera WNMU 0806 inserts reduces the need for bespoke cutting grades and simplifies stock management. The holder is suitable for a wide range of turning tasks where a defined shoulder or corner finish is required, enabling machine shops and production lines to standardise tooling across similar part families. The result is a pragmatic combination of performance and inventory efficiency that supports continuous production. Contact Metav Werkzeuge today to discuss how the Teknik Makina Corner Tool Head T544TM can be integrated into your tooling set — our consultants will advise on compatibility, delivery from Emmerich and suitable inserts for the intended application. Technical Data Article number: T544TM Manufacturer: Teknik Makina Description: Corner tool head for WNMU 0806 indexable inserts Facts Head diameter: 63 mm Shank diameter (clamping): 22 mm Overall length: 46 mm Cutting angle: 90° Number of cutting edges: 4 Weight: 0.556 kg Fastening screw: M5x12 (Torx T20) Special features Compatible with WNMU 0806 indexable inserts Fits inserts from Kyocera Torx fastening for secure clamping Four‑edge insert indexing for extended service life FAQ Which inserts are compatible with this tool head? The Corner Tool Head T544TM is designed for WNMU 0806 indexable inserts, and it is compatible with inserts supplied by Kyocera. What is the shank diameter and why does it matter? The holder has a 22 mm shank diameter; a larger shank increases rigidity, reducing vibration and improving surface finish. For which operations is this holder best suited? Its 90° cutting angle makes it ideal for shoulder and external turning where precise right‑angle features are required. How is the insert secured and what tool is required? Inserts are clamped with an M5x12 Torx screw; a T20 Torx key is required for tightening and changeover. What are the key dimensions and weight of the tool head? Key figures: head diameter 63 mm, overall length 46 mm and weight 0.556 kg. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
66mm Corner Turning Head for BOMT 1304 Indexable Inserts L40mm with Internal Coolant - Teknik Makina
Benefit from a compact, rigid tool head that combines a 66 mm diameter and a 90° cutting angle with internal coolant for improved chip control and surface finish; this results in steadier turning and less rework. Order the tool directly via Metav Werkzeuge or consult our specialists for tailored application advice. Corner tool head T968TM — 66 mm diameter, internal coolant by Teknik Makina Corner tool head T968TM is a robust indexable head designed for facing and shoulder turning with BOMT 1304 inserts, offering compact overhang and integrated coolant for stable machining. *66 mm diameter for compact setups *Internal coolant for direct cutting-edge cooling *Fits BOMT 1304 indexable inserts *90° cutting angle for precise shoulder operations Greater rigidity for consistent dimensional accuracy The larger 66 mm body provides improved stiffness compared with smaller heads, reducing vibration in demanding turning operations. With a 90° cutting angle, the head is tailored to shoulder and facing tasks where precise perpendicularity and consistent corner geometry matter. The relatively short 40 mm overall length reduces overhang, which translates into better concentricity and repeatable part quality. These design choices support higher machining stability, lowering scrap rates and minimising the need for secondary finishing. Controlled cooling and chip management for longer tool life Integrated internal coolant channels deliver cutting fluid directly to the insert zone, improving chip control and heat dissipation at the cutting edge. This targeted cooling reduces thermal load and helps maintain tool geometry, which extends tool life and preserves surface integrity on each workpiece. Better evacuation of chips from the cutting zone also reduces the risk of recutting, supporting uninterrupted cycle times and a cleaner workstation without complex external arrangements. Compatibility and straightforward maintenance to keep production moving The head is specified for BOMT 1304 indexable inserts and is compatible with inserts from Ingersoll, enabling fast interchangeability within existing tool sets. Fastening uses a M3.5x8.5 Torx screw and T10 key, enabling quick replacement and secure clamping without specialised tools. With a mass of 0.697 kg and a balanced design, the unit installs easily on compatible toolholders and contributes to predictable toolpath performance. Minimal maintenance and standard fasteners reduce downtime and simplify replacement in busy shops. Choose Teknik Makina engineering for dependable turning performance and contact Metav Werkzeuge for supply and application guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: T968TM Manufacturer: Teknik Cutting Tools Designation: Corner tool head for BOMT 1304 indexable inserts Facts Diameter: 66 mm Overall length: 40 mm Weight: 0.697 kg Cutting angle: 90° Cutting edges: 6 Special features Internal coolant Compatible with BOMT 1304 inserts Compatible with Ingersoll inserts Torx screw M3.5x8.5 Torx key T10 FAQ What insert type does this head accept? The corner tool head accepts BOMT 1304 indexable inserts and is compatible with inserts from Ingersoll for flexible tooling arrangements. Is there coolant delivery to the cutting edge? Yes, the unit features internal coolant that supplies lubricant directly to the cutting zone to aid chip evacuation and cooling. What is the cutting geometry and typical application? The head provides a 90° cutting angle, optimised for shoulder turning and facing where perpendicular edge control is required. What fasteners are used for insert clamping and maintenance? Insert clamping uses a M3.5x8.5 Torx screw and requires a T10 key for secure and quick servicing. What are the dimensions and mass for mounting considerations? Diameter is 66 mm, overall length 40 mm, and mass 0.697 kg, enabling compact installation with reduced overhang. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
66mm Face Mill For RDMT 1604 Indexable Inserts 5 Teeth, 27mm Shank - Teknik Makina
The combination of a compact Ø 66 mm cutting diameter, compatibility with RDMT 1604 indexable inserts and a secure 27 mm mounting bore delivers efficient material removal with low tool-change overhead; order the tool via Metav Werkzeuge or consult our specialists for configuration advice. Rundplattenfräser – Round insert milling cutter, Ø 66 mm for RDMT 1604 (Teknik Makina) A Rundplattenfräser designed for reliable face and peripheral milling using RDMT 1604 indexable inserts in workshop and production environments. Ø 66 mm cutting diameter for efficient material removal Compatible with RDMT 1604 indexable inserts Five cutting edges for stable cutting performance 27 mm mounting bore for secure attachment Faster cycle times through focused cutter geometry The combination of a compact Ø 66 mm head and five cutting edges provides a balance between material removal rate and tool stability. This geometry reduces vibration and allows higher feed per tooth without compromising surface finish, which translates into measurable productivity gains on medium-duty milling operations. For machining cycles where tool life and repeatability matter, the design shortens processing time and reduces the frequency of changeovers. Secure clamping and quick indexability minimise downtime Clamping is executed with standardised hardware: a locking screw M4x10, Torx screw M4.5x11 and Torx key T20 secure the inserts to the pocket plate BSP010, keeping insert seating consistent and repeatable. The 27 mm mounting bore ensures firm engagement with tooling arbors and adapters, while the overall length and mass distribution (approx. 0.495 kg) contribute to stable rotation and predictable balancing. These features simplify maintenance and support rapid insert changes with minimal adjustment. Standardised inserts reduce inventory complexity Built to accept RDMT 1604 indexable inserts, the cutter relies on a widely available insert format that many workshops and production lines already use. Standardisation of the cutting edge type means fewer unique spare components to stock and faster resupply when replacement inserts are required. The use of indexable inserts also keeps reconditioning costs down, as worn edges are replaced instantly rather than regrinding entire bodies. Serviceable components for continuous operation The modular construction prioritises serviceability: wearing elements are consumable inserts and standardised fasteners, allowing predictable maintenance intervals and simple on‑site replacement. This approach protects uptime and makes the tool suitable for both short production runs and repetitive tasks in larger batches. Clear identification of spare parts such as the pocket plate and screws supports efficient inventory management and faster repairs. Request a technical quotation or application advice from Metav Werkzeuge for the Teknik Cutting Tools round insert milling cutter T272TM (Ø 66 mm, compatible with RDMT 1604); Metav Werkzeuge can advise on tooling adapters and delivery — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: T272TM Manufacturer: Teknik Makina Product designation: Rundplattenfräser Description (EN): for RDMT 1604 Indexable Inserts Facts Diameter: 66 mm Cutting edges: 5 Overall length: 50 mm Mounting bore: 27 mm Weight: 0.495 kg eClass: 21180902 ETIM: EC011860 Special features Compatible inserts: RDMT 1604 Locking screw: M4x10 Torx screw: M4.5x11 Torx key: T20 Pocket plate: BSP010 FAQ What insert type is required for this cutter? The cutter is designed for RDMT 1604 indexable inserts; Teknik Makina supplies the T272TM body configured for this insert family to ensure correct seating and chip control. How is an insert secured in the pocket? Insert retention uses a locking screw (M4x10) together with a Torx screw (M4.5x11); the standard T20 Torx key applies torque consistently, allowing the round insert milling cutter T272TM to be serviced quickly. Which spindle or arbor interface is needed? The tool features a 27 mm mounting bore for engagement with common arbor systems; confirm adapter compatibility for the intended machine spindle before fitting the Teknik Makina T272TM cutter. Are spare parts and fasteners available separately? Spare pocket plates (BSP010), screws and retaining hardware for the T272TM are standardised items that simplify procurement and maintenance planning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
66mm Face Milling Head for BLMP 0904 Indexable Inserts 50mm, Internal Coolant - Teknik Makina
Benefit from precise face‑milling performance with a 66 mm diameter and internal coolant, combined with seven cutting edges for steady material removal; order this cutter head via Metav Werkzeuge or contact our consultants for specification support. Face milling head T487-2TM by Teknik Makina — 66 mm, internal coolant, for BLMP 0904 indexable inserts A Face milling head T487-2TM engineered for efficient face milling in industrial and workshop environments, compatible with BLMP 0904 indexable inserts and optimised for coolant‑assisted applications. *66 mm diameter for robust face milling *Internal coolant for improved tool life *Seven cutting edges for consistent material removal *Compatible with BLMP 0904 inserts (Taegutec) High productivity through engineered geometry and steady cutting The milling head combines a 66 mm tool body with a 100° cutting angle, providing a balance between material engagement and chip control. The tool’s geometry and seven cutting edges enable repeated index changes, which reduces the frequency of tool replacements and maintains a predictable cutting regime. This results in reliable cycle times and repeatable face finishes, making the component suitable for production runs where consistent surface quality and throughput are priorities. Coolant integration and fastening designed for safe operation Integrated internal coolant ensures directed cooling to the cutting zone and improved chip evacuation, reducing thermal load on the inserts and extending tool life. The head accepts Torx fastening with a T10 key and M3.5x8.5 Torx screws for secure insert clamping; these standardised fixings simplify maintenance and spare‑parts handling. Compatibility with BLMP 0904 indexable inserts from Taegutec allows straightforward tooling integration and access to established insert grades for different materials. Operational benefits that reduce downtime and support efficiency With a compact overall length of 50 mm and a modest mass of 0.675 kg, the cutter head reduces inertia and minimises additional load on the spindle, supporting quicker acceleration and more stable running at typical face‑milling speeds. The combination of robust construction and accessible insert changes means fewer interruptions on the shop floor and a lower cost per finished component. Where operational efficiency and predictable output matter, this configuration delivers measurable benefits in throughput and surface consistency. Workshop fit and supply reliability from a trusted partner The head is designed for use in diverse metalworking contexts and fits standard toolholders with a 22 mm mounting diameter. Sourcing through Metav offers the advantage of centralised procurement and a quality filter based in Emmerich, backed by decades of precision expertise. Metav’s broad product range and steady logistics support make it easier for workshops and vendors to maintain stocks of compatible inserts and fasteners, ensuring uninterrupted production and access to technical guidance when adapting tooling to specific materials. For tailored technical advice or to secure supply of this Teknik Makina face milling head with internal coolant, contact Metav Werkzeuge for personal consultation and reliable delivery from Emmerich Technical data SKU: T487-2TM Product type: Face milling head Manufacturer: Teknik Makina Compatible inserts: BLMP 0904 (Taegutec) Facts Diameter: 66 mm Mounting diameter: 22 mm Overall length: 50 mm Weight: 0.675 kg Cutting edges: 7 Cutting angle: 100° Special features Internal coolant Torx key requirement: T10 Torx screw: M3.5x8.5 Suitable for BLMP 0904 indexable inserts Label: 66mm Planmesserkopf BLMP 0904 L50mm mit Innenkühlung FAQ How many cutting edges does the head provide? The head offers seven cutting edges, delivering sustained productivity and multiple index positions before insert replacement is required. Which inserts are supported with this cutter head? This cutter head is compatible with BLMP 0904 indexable inserts; Taegutec inserts are explicitly suitable for this configuration. Is the tool suitable for coolant‑assisted machining? Yes, the head features internal coolant, which directs lubricant and cooling fluid to the cutting zone to improve chip evacuation and tool life. What fastening hardware is required for insert clamping? Insert clamping uses Torx screws sized M3.5x8.5 and a T10 Torx key for secure, standardised fastening. What are the key dimensions to check for holder compatibility? Key dimensions include a 66 mm diameter, 22 mm mounting/shank diameter and 50 mm overall length; confirm these against the machine toolholder specifications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
66mm Round Face Mill for RDMT 1604 Indexable Inserts L50mm With Internal Coolant - Teknik Makina
Take advantage of the combination of 66 mm diameter, internal coolant and compatibility with RDMT 1604 indexable inserts for reliable face‑milling performance; order the cutter directly via Metav Werkzeuge or consult our specialists for application support. Round Insert Face Mill for RDMT 1604 with internal coolant (Teknik Makina) The Round Insert Face Mill for RDMT 1604 indexable inserts is a medium‑duty face‑milling head designed for stable material removal, with internal coolant for improved chip control and consistent surface finish. 66 mm diameter for wide coverage Internal coolant for improved tool life Compatible with RDMT 1604 indexable inserts Five cutting edges for consistent material removal Increase throughput with a robust cutting geometry The geometry of this milling head is optimised for steady stock removal: a 66 mm diameter delivers broader engagement per pass, while the configuration of the five cutting edges spreads cutting loads and reduces individual insert wear. This results in higher effective productivity on linear feed operations and less frequent index changes. For production environments seeking consistent cycle times, the head’s design supports repeatable cutting performance and helps maintain process stability at moderate spindle speeds. Better thermal management and chip evacuation for longer tool life The integrated internal coolant channel directs fluid close to the cutting zone, improving chip evacuation and reducing thermal load on the inserts. Lower cutting temperatures decrease the risk of premature edge degradation and micro‑cracking, extending usable edge life and reducing tooling costs over multiple regrinds or index cycles. In practice, improved evacuation also reduces recutting of swarf, which helps preserve surface quality and reduces unplanned rework. Simplified tooling logistics with standard indexable inserts Compatibility with RDMT 1604 indexable inserts simplifies inventory and tool‑change procedures: standard round inserts provide symmetrical cutting edges and permit straightforward indexing, while the compatible fastening system uses a T15 torx key and M4x10 torx screw for secure clamping. This standardisation supports predictable maintenance routines and reduces setup time during insert changes, benefiting workshops and job shops that value lean tooling management. Practical handling and secure mounting for everyday use With a 50 mm total length and a compact mass of roughly 0.495 kg, the cutter offers a balance between rigidity and ease of handling during tool changes. The head is supplied in the common face‑milling format and is suited to holders compatible with the same mount class; the secure screw and torx interface ensure stable seating of each insert under normal cutting conditions. Clear procedural maintenance—using the specified torx key and screw size—keeps downtime to a minimum and supports safe, repeatable operations. For tailored tooling recommendations or to secure the Teknik Makina T272-1TM with internal coolant from our Emmerich stock, contact Metav Werkzeuge for specialist advice and reliable supply. Technical data SKU: T272-1TM Product type: Round insert face mill Core dimensions Diameter: 66 mm Total length: 50 mm Weight: 0.495 kg Features & compatibility Insert type: RDMT 1604 indexable inserts Cutting edges: 5 Internal coolant: yes Torx key: T15 Torx screw: M4x10 FAQ Which inserts fit this milling head? The head accepts RDMT 1604 indexable inserts; this compatibility ensures standard insert sizes can be used and indexed to spread wear. How does the internal coolant affect performance? Internal coolant improves chip evacuation and reduces cutting temperatures, which in turn helps extend insert life and stabilise surface finish during longer cuts. What fastening components are required for insert changes? Insert clamping uses a T15 torx key and M4x10 torx screw, enabling secure seating and straightforward replacement procedures. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
66mm Round Insert Face Mill for RDMT 12T3 Indexable Inserts, 6 Teeth, 50mm Overall Length, M3.5 Clamp Screw - Teknik Makina
Benefit from a robust combination of a 66 mm cutting diameter and six cutting edges for stable, efficient material removal; the compact 27 mm shank and precise Torx clamping reduce downtime and maintain repeatable results. Order the round indexable cutter directly via Metav Werkzeuge or consult Metav's specialists for application advice. Round Indexable Cutter T668-1TM – 66 mm Ø, for RDMT 12T3 inserts (Teknik Makina) A Round Indexable Cutter T668-1TM engineered for versatile face milling with RDMT 12T3 indexable inserts in light to medium milling applications 66 mm cutting diameter for stable engagement Six cutting edges for efficient material removal 27 mm shank for secure toolholder fit Torx clamping M4x10, key size T15 Consistent material removal with a compact milling head The T668-1TM is configured to deliver repeatable cutting performance by combining a 66 mm diameter with six cutting edges designed for indexable RDMT 12T3 inserts. This geometry supports smooth chip formation and helps to maintain cutting forces within predictable limits, which is particularly advantageous in batch production and mixed-series work. The use of standard RDMT 12T3 inserts simplifies tool stocking and enables quick indexation when an edge is worn, supporting continuous operation and predictable process outcomes. Secure clamping and compatibility that reduces setup time Tool retention and repeatability are addressed through a 27 mm shank and a robust screw arrangement: Torx screw M4x10 with T15 key interface plus an additional M3.5 locking screw for fine fixing. This arrangement ensures a stable connection to the toolholder and lowers the risk of movement under cutting loads. Compatibility with Palbit RDMT 12T3 inserts broadens insert sourcing options and facilitates straightforward replacement, while secure clamping contributes to improved surface quality and fewer interruptions on the shopfloor. Compact dimensions that suit tight setups and easy handling With an overall length of 50 mm and a weight of 0.67 kg, this cutter is designed for applications where space and handling matter. The compact form factor supports close-coupled setups and reduces overhang, which helps to decrease vibration and improves the potential for higher feed rates within machine and tool limits. The combination of small overall length and a stable cutting diameter makes the tool suitable for confined fixturing without sacrificing the benefits of a multi-edge milling solution. Practical maintenance and operational benefits The cutter’s design focuses on rapid serviceability: indexable RDMT 12T3 inserts allow for fast edge changes without complex regrinding, while the Torx screw system provides familiar, durable clamping. These attributes shorten maintenance cycles and assist in keeping machine uptime high. Specifying a standard insert size and a common screw/key interface supports cost-effective stocking and reduces the variety of spares required in a production environment. For availability, technical matching or to arrange delivery of the Teknik Makina T668-1TM, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for precise consultation and reliable supply. Technical data Article number: T668-1TM Manufacturer: Teknik Makina Product name: Round indexable cutter (for RDMT 12T3) Facts Diameter: 66 mm Cutting edges: 6 Overall length: 50 mm Shank diameter: 27 mm Weight: 0.67 kg Special features For RDMT 12T3 indexable inserts Compatible insert manufacturer: Palbit Torx screw: M4x10 Torx key size: T15 Locking screw: M3.5 FAQ Which inserts fit this cutter? The cutter is designed for RDMT 12T3 indexable inserts; compatibility with Palbit RDMT 12T3 grades is specified for the T668-1TM. What is the shank diameter? The shank diameter is 27 mm, suitable for matching toolholders that accept a 27 mm shank. How many cutting edges does the cutter have? The tool features six cutting edges, supporting efficient material removal and balanced cutting action. Which screw and key are used for clamping? Clamping uses a Torx M4x10 screw with a T15 key interface; an additional M3.5 locking screw is provided for secure fixing. What are the dimensions and weight? The cutter has a 66 mm diameter, an overall length of 50 mm and weighs 0.67 kg. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Planflächen schneller und präziser herstellen
Planfräser, auch als Planfräswerkzeug oder Stirnplanfräser bezeichnet, sind meist mit Wendeschneidplatten bestückte Trägerwerkzeuge für Fräsmaschinen. Sie ermöglichen das großflächige Abtragen von Material, das Planfräsen von Werkstücken auf Maß und die Erzeugung einer gleichmäßigen, planaren Oberflächenstruktur.
Wie das Planfräswerkzeug technisch wirkt und wann es unabdingbar ist
Ein Planfräswerkzeug arbeitet offen auf der Materialoberfläche, sodass Späne radial abgeführt werden. Bei Ausführungen ohne Innenkühlung erfolgt die Wärme- und Spanableitung über externe Kühlmitteldüsen oder zugeführte Druckluft; das ist bei vielen regulären Planfräsarbeiten ausreichend. Modelle mit Innenkühlung verfügen über integrierte Bohrungen und Kanäle, die Kühlschmierstoff oder Blasluft direkt an die Schneidkanten leiten. Diese gezielte Zufuhr verhindert thermische Überlastung, reduziert Aufbauschneidenbildung und spült Späne zuverlässig aus der Schnittzone – entscheidend bei schwerzerspanenden, klebenden Werkstoffen oder sehr großen Schnittbreiten.
Mehr Effizienz im Werkstattalltag durch gezielten Einsatz
- Reduziert Rüstzeiten durch modulare Bestückung mit Wendeschneidplatten und einfachem Plattenwechsel.
- Verbessert die Oberflächengüte durch gleichmäßige Spanabfuhr und, bei Bedarf, gezielte Innenkühlung.
- Erhöht die Standzeit der Werkzeuge, weil thermische Belastung und Aufbauschneidenbildung minimiert werden.
- Sorgt für konstante Maßhaltigkeit bei großflächigen Bearbeitungen dank stabiler Trägerwerkzeuge.
Metav als zuverlässiger Partner für Ihre Planbearbeitung
Metav steht für Demokratisierung der Präzision und kombiniert jahrzehntelange Fachkompetenz mit einem breiten Sortiment. Aus dem Lager in Emmerich liefert Metav als Qualitätsfilter ein Sortiment, das Werkstätten und Industrie mit technisch passenden Planfräsern versorgt. Mit über 48.000 zufriedenen Kunden und mehr als 250.000 Produkten bietet Metav die Auswahl und Verfügbarkeit, um die passende Ausführung — mit oder ohne Innenkühlung — für Ihre Bearbeitungssituation zu finden.
Kurz und prägnant
Ein Planfräser ist das zentrale Werkzeug, wenn große, ebene Flächen schnell, maßhaltig und mit hoher Oberflächenqualität herzustellen sind. Die Wahl zwischen ohne Innenkühlung und mit Innenkühlung richtet sich nach Werkstoff, Schnittbreite und Wärmeentwicklung.
FAQ
Wann ist ein Planfräser mit Innenkühlung erforderlich?
Bei schwerzerspanenden oder stark wärmeentwickelnden Werkstoffen sowie bei sehr großen Schnittbreiten empfiehlt sich ein Planfräser mit Innenkühlung, weil die gezielte Kühlschmierstoffzufuhr thermische Überlastung und Aufbauschneidenbildung verhindert.
Reicht bei normalen Stahlblechen ein Planfräswerkzeug ohne Innenkühlung aus?
Für viele reguläre Planfräsarbeiten an unlegierten und niedrig legierten Stählen ist ein Planfräswerkzeug ohne Innenkühlung ausreichend, da Späne offen radial abfließen und externe Kühlmitteldüsen oder Druckluft die Wärmeableitung übernehmen.
Wie verlängert man die Standzeit von Planfräsern effektiv?
Die Standzeit eines Planfräswerkzeugs lässt sich durch passende Wendeschneidplatten, richtige Schnittparameter, konsequente Spanabfuhr und bei Bedarf durch Innenkühlung deutlich erhöhen.
Welche Vorteile bieten modulare Planfräswerkzeuge im Produktionsalltag?
Modulare Planfräser ermöglichen schnellen Plattenwechsel, reduzieren Rüstzeiten und erlauben die Anpassung an unterschiedliche Schnittbreiten und Werkstoffe ohne kompletten Werkzeugwechsel.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com