End gauges for precise length calibration
End gauges provide exact reference lengths for calibrating measurement instruments and ensuring consistent dimensional accuracy in metalworking and inspection processes. Used in production and laboratory settings, these end gauges—made from steel, ceramic or carbide—allow technicians to compensate for wear and thermal effects and maintain measurement traceability, especially when employed alongside parallel end gauges, cylinder gauges and calibration masters. Classes 0, 1 and 2 define practical tolerance levels for workshop, inspection-room and production use respectively, delivering the repeatable precision required for machining and quality control.
1.006 mm Gauge Block Grade 1, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
The combination of DIN EN ISO 3650 conformity, Grade 1 accuracy and hardened special steel ensures a reliable reference for incoming inspection and routine verification; benefit from consistent measurement results and reduced rework. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. End gauge 1.006 mm — Grade 1 reference standard by Metav IndustryLine The End gauge 1.006 mm is a precision reference block designed for dimensional verification in metrology labs and workshop quality control. DIN EN ISO 3650 conformity, Grade 1 Diameter 1.006 mm reference standard Hardened special steel for long wear Compact 30x9 mm cross-section Consistent accuracy to protect production quality As a high‑precision reference standard, this gauge provides a defined nominal size of 1.006 mm with Grade 1 tolerance under DIN EN ISO 3650, making it suitable for traceable checks of micrometres, callipers and other comparative measuring instruments. Using a standardised reference reduces inspection variability and shortens decision times on whether parts meet specification, which directly supports efficiency targets on the shop floor and during incoming inspections. The clear normative basis of the component enables straightforward documentation of measurement procedures and quality records. Durable construction for repeatable handling Manufactured from hardened special steel, the gauge resists wear and maintains its measuring faces over many cycles, translating into lower replacement frequency and predictable lifetime costs. The compact 30x9 mm cross‑section for nominal sizes up to 10 mm helps to avoid bending during handling and provides a stable gripping area for repeatable positioning. The low mass contributes to easy manipulation during quick comparative checks while the robust material preserves surface integrity, so the reference stays dependable for routine use. Fits into inspection workflows with minimal fuss Designed as a workshop‑grade reference, the gauge integrates easily into calibration benches and verification routines. Lab personnel and technicians can use the block to confirm instrument zero points or to validate measurement chains before production runs, helping to prevent downstream scrap and rework. As an ISO‑referenced standard component, it supports consistent cross‑shift and cross‑site comparisons when the same reference specification is adopted across multiple workstations. Metav IndustryLine’s product numbering facilitates ordering and inventory control for maintenance plans and quality audits. Contact Metav Werkzeuge for tailored advice on implementing Grade 1 reference standards from Metav IndustryLine and to confirm suitability for specific inspection tasks Technical data Article number: M319.01006.1 GTIN: 4054469130095 Norm: DIN EN ISO 3650 Material: Special steel, hardened Grade: 1 Facts Nominal size: 1.006 mm Weight: 0.004 kg Tariff number: 90173000 Cross-section (≤10 mm): 30x9 mm Special features Grade 1 accuracy per DIN EN ISO 3650 Hardened special steel for wear resistance Compact form factor for stable handling Category: End gauges / End masses FAQ What level of accuracy does this reference provide? The End gauge 1.006 mm from Metav IndustryLine is specified as Grade 1 under DIN EN ISO 3650, providing the precision required for reliable comparative checks in workshops and metrology labs. Can this gauge be used to check micrometres and callipers? Yes, the 1.006 mm reference standard is intended for verifying the dimensional accuracy of micrometres, callipers and other measuring instruments as part of routine inspection procedures. What is the material and why does it matter? The gauge is made of hardened special steel, chosen for its resistance to wear and its ability to maintain measuring faces, which ensures long‑term repeatability of results in quality control applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.006mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of the combination of wear‑resistant ceramic, Grade 1 accuracy and an exact 1.006 mm nominal size for dependable reference measurements and repeatable calibration results. Order the product directly via Metav Werkzeuge or ask our consultants if needed. Ceramic gauge block 1.006 mm – Grade 1 (DIN 861/1) by Metav IndustryLine The ceramic gauge block 1.006 mm, grade 1 (DIN 861/1) is a compact reference standard designed for precision metrology, calibration benches and quality control applications. Grade 1 accuracy to DIN 861/1 Wear‑resistant ceramic material Nominal size 1.006 mm exactness Reference standard for traceable measurements This ceramic reference provides a stable dimension for use as a master standard during calibration and comparison procedures. With Grade 1 conformity to DIN 861/1, the block is intended to deliver a reliable datum for routine checks and quality control tasks in inspection labs. The compact nominal size 1.006 mm makes it suitable as a tight reference point when verifying small features or zero‑setting instruments, supporting consistent measurement chains and process control. Material benefits that support accuracy Made from low‑reactivity ceramic, the block combines wear resistance with low thermal sensitivity compared with many steels. That material behaviour reduces dimensional drift during short handling periods and helps maintain the reference dimension when transferred between measuring stations. The lightweight, compact form minimises mass‑related handling errors while providing a hard, stable surface for lasting contact measurements under normal inspection workflows. Practical use in the calibration workflow Designed for use as a laboratory or workshop reference, this component integrates smoothly into established calibration routines for callipers, micrometres and comparator setups. The compact geometry eases positioning on anvils and in small fixtures, enabling quick, repeatable checks without extensive setup time. Where traceable reference measures are required, this ceramic block supports a predictable measurement basis that contributes to reduced rework and a steadier production quality. For procurement advice or to secure the Metav IndustryLine ceramic gauge block M324.001.006 as a dependable Grade 1 reference, contact Metav Werkzeuge for detailed delivery and specification guidance from Emmerich. Technical Data Article number: M324.001.006 GTIN: 4054469142333 Label: Keramik-Endmaß 1,006mm, Güte 1 DIN 861/1 Manufacturer: Metav IndustryLine Facts Nominal size: 1.006 mm Material: Ceramic Weight: 0.001 kg Tolerance grade: 1 (DIN 861/1) Customs tariff number: 90173000 Special features Wear‑resistant ceramic Reference use in metrology and calibration Compact, low‑mass design FAQ What level of accuracy can be expected from this gauge block? The block meets Grade 1 requirements under DIN 861/1, providing a precise reference dimension suitable for routine laboratory and workshop comparisons. Is the ceramic material suitable for regular contact measurements? Yes, the ceramic construction offers high surface hardness and wear resistance, making the gauge block appropriate for repeated contact measurements when handled correctly. Can this reference be used to check callipers and micrometres? The ceramic gauge block is intended as a reference master for verifying the accuracy of callipers, micrometres and other dimensional measuring devices; the SKU M324.001.006 is sized to support small‑feature calibration tasks. How should the block be stored to preserve its accuracy? Store the block in a dry, stable environment and protect it from impact and contamination; routine cleanliness and careful handling will help maintain the reference dimension over time. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.007 mm Gauge Block Grade 0 DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of a Grade 0 reference piece that complies with DIN EN ISO 3650 and is made from hardened special steel to secure reproducible calibration and inspection results; order directly via Metav Werkzeuge or request bespoke advice from our consultants. Single gauge block 1.007 mm — Grade 0, DIN EN ISO 3650 (Metav IndustryLine) A Single gauge block 1.007 mm designed as a high-precision reference for calibration, inspection and dimensional control in metrology and quality departments DIN EN ISO 3650 grade 0 accuracy Precision ground to 1.007 mm nominal size Hardened special steel construction Engineered for reproducible calibration results This reference element is manufactured to DIN EN ISO 3650 and supplied in Grade 0, providing a stable baseline for traceable measurements. The nominal size of 1.007 mm is precision ground to tight limits, which reduces measurement uncertainty when used as a comparative standard on micrometres, calipers or comparator benches. As a consequence, laboratories and inspection stations gain a dependable artefact for checking instrument drift and ensuring conformity with procedural tolerances without frequent rework. Durable construction that minimises wear and handling effects Constructed from hardened special steel, the block resists surface wear and maintains flatness over repeated use, helping to preserve long-term dimensional integrity. The compact cross-section (up to 10 mm: 30 × 9 mm; from 10.1 mm: 35 × 9 mm) and low mass make the piece easy to position while limiting thermal and handling influences on measurement. The material choice together with precision grinding means fewer re-grinds over the product lifetime and consistent contact surfaces for tactile and optical comparisons. Practical application and integration into quality workflows This single end measure serves as a reference artefact in calibration sets, incoming inspection and laboratory audits. The Grade 0 specification places it within the class used for demanding workshop and laboratory tasks where a high degree of reproducibility is required. Integration is straightforward: the block complements existing gauge block sets and works well for step checks, comparative calibrations and for establishing reference lengths when setting up measurement chains. Purchasing through an established supplier streamlines availability and delivery into production or metrology rooms. For laboratory-grade reference standards, request the Grade 0 1.007 mm single gauge block from Metav Werkzeuge in Emmerich to ensure consistent, traceable measurements and expert supply advice Technical Data Article number: M319.01007.0 GTIN: 4054469130101 Manufacturer: Metav IndustryLine Material: Special steel, hardened Nominal size: 1.007 mm Weight: 0.004 kg Standard: DIN EN ISO 3650 Facts Tolerance class: Grade 0 Cross-section: up to 10 mm — 30 × 9 mm; from 10.1 mm — 35 × 9 mm Tariff number: 90173000 Special features Single gauge block / end measure Precision ground reference surface Suitable for calibration and inspection use FAQ What accuracy class does this gauge block have? The item is specified as Grade 0 according to DIN EN ISO 3650, making it suitable for high-precision comparative measurements and calibration checks What is the nominal dimension and how precise is it? The nominal size is 1.007 mm; the block is precision ground to the Grade 0 requirements of DIN EN ISO 3650 Which material is used and how does it affect durability? Manufactured from hardened special steel, the block offers good wear resistance and surface stability for repeated contact measurements Can this block be used with existing gauge block sets and calibration benches? Yes, the single end measure complements standard gauge block sets and is intended for integration into laboratory and workshop calibration chains What is the product article number for ordering and identification? The article is listed as M319.01007.0 and sold under the Metav IndustryLine designation Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.007 mm Gauge Block Grade 1, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
Take advantage of a compact, standardised length standard with 1.007 mm nominal size, Grade 1 accuracy and hardened special steel for reliable routine calibration; order via Metav Werkzeuge or consult Metav specialists for application advice. Gauge block 1.007 mm — Metav IndustryLine, hardened special steel, DIN EN ISO 3650 Gauge block 1.007 mm serves as a precision length standard for bench and laboratory metrology, designed to support measurement setups and calibration chains in machine shops and inspection departments. Exact nominal length 1.007 mm Conforms to DIN EN ISO 3650 Grade 1 Hardened special steel construction Compact cross-section 30 x 9 mm Precision that secures repeatable results This length standard delivers a compact and traceable reference at 1.007 mm, manufactured to the requirements of DIN EN ISO 3650 and classified as Grade 1. The design focuses on repeatability and measurement certainty: the nominal size provides a stable reference when setting gauges, comparators or micrometres, and the Grade 1 classification indicates suitability for demanding shop‑floor calibration and higher‑accuracy workshop tasks. By integrating a standardised block into routine checks, inspection loops become more predictable and corrective action can be targeted before process drift affects part quality. Robust construction for everyday handling Produced from hardened special steel, the block combines wear resistance with a workable surface finish that tolerates regular use in production and inspection environments. The cross‑section for nominal sizes up to 10 mm is 30 x 9 mm, giving a comfortable grip and compatibility with common holders and wringing plates. At roughly 0.004 kg, the piece is lightweight and easy to manipulate without compromising stability during measurement. The material choice and finish reduce the frequency of maintenance and preserve the reference surface, extending service life and lowering total cost of ownership. Practical role within calibration workflows Made as a length standard, the block is intended for assembling calibrated stacks, checking instrument zeroes and validating comparators. Conformity with DIN EN ISO 3650 simplifies documentation and helps maintain a coherent traceability chain when combined with other certified artefacts. The compact form factor supports both bench use and integration in modular test rigs, while the clear nominal value streamlines procedures in quality control plans. For organisations requiring consistent metrology practices, using standardised gauge blocks reduces uncertainty and supports efficient, auditable inspection routines. For advice on incorporating the Metav IndustryLine gauge block into existing calibration routines or to confirm stock and delivery, contact Metav Werkzeuge for tailored guidance and reliable supply. Technical data Article number: M319.01007.1 Name: Gauge block 1.007 mm, DIN EN ISO 3650, Grade 1 Material: Special steel, hardened GTIN: 4054469130118 Facts Nominal length: 1.007 mm Weight: 0.004 kg Tariff number: 90173000 Special features Cross-section: up to 10 mm – 30 x 9 mm Standard: DIN EN ISO 3650 Grade: 1 FAQ What is the intended use of this gauge block? The gauge block 1.007 mm from Metav IndustryLine is intended as a precision length standard for setting and checking measuring instruments, assembling calibrated stacks and routine verification tasks. Does Grade 1 meet workshop calibration needs? Grade 1 under DIN EN ISO 3650 denotes a high level of precision suitable for most machine‑shop and inspection applications where reliable, repeatable references are required. Which materials and sizes are compatible with this block? The block is made of hardened special steel and is best used with standard metrology accessories such as wringing plates, holders and micrometre anvils compatible with small‑format blocks. How should the block be handled and stored? Keep the block clean and dry, avoid scratches on the reference faces, and store in a protective case or drawer at stable temperature to preserve the reference surfaces. Can the block be integrated into a calibration certificate chain? Yes; manufactured to DIN EN ISO 3650 and supplied with the clear nominal value, this gauge block can be incorporated into documented calibration procedures and traceability chains. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.007mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Choose a precision length standard that combines ceramic durability with Grade 1 (DIN 861/1) tolerance and an exact nominal size of 1.007 mm for reliable, repeatable reference measurements; order the ceramic gauge block directly via Metav Werkzeuge or ask our consultants if needed. Ceramic gauge block 1.007 mm (Grade 1 DIN 861/1) — Metav IndustryLine Ceramic gauge block 1.007 mm (Grade 1 DIN 861/1) is a compact length standard designed for laboratory calibration and quality control where stable, low‑expansion references are required. Ceramic material, corrosion-resistant Nominal size 1.007 mm for fine calibration Grade 1 DIN 861/1 certified tolerance Compact, lightweight precision standard Stable reference for high-accuracy measurement The block serves as a precision length standard offering the reproducibility needed in calibration work and dimensional verification. With a nominal length of 1.007 mm and classification to Grade 1 (DIN 861/1), this ceramic standard supports tight inspection tolerances and reduces uncertainty in routine checks. The combination of a defined nominal value and an industry-recognised tolerance class makes it suitable for use in laboratory environments and in quality control workflows where consistent, comparable measurements matter. Practical benefits include fewer reworks and faster decision cycles thanks to a dependable reference artefact. Material advantages that protect long-term accuracy Made from ceramic, the gauge block offers wear resistance and inherently low thermal expansion compared with many metallic references, which helps maintain dimensional stability across normal temperature fluctuations in a metrology environment. Its very low mass (approx. 0.001 kg) and compact dimensions make it easy to handle and integrate into existing gauge block sets or measurement routines without adding substantial thermal load to a measurement stack. As a result, the standard retains its dimensional integrity and supports longer calibration intervals when used and stored correctly. Practical integration into calibration workflows This compact length standard is suited to laboratories, calibration benches and metrology departments for use as a reference in both manual checks and automated inspection set-ups. The ceramic gauge block is particularly useful where corrosion resistance and minimal maintenance are priorities. When introduced into a traceable calibration chain, it can help shorten verification cycles and increase confidence in measurement results. For specific application advice or integration into a measurement concept, Metav Werkzeuge consultants can provide technical guidance tailored to industrial requirements. Speak to Metav Werkzeuge for application advice or to secure the Metav IndustryLine ceramic gauge block M324.001.007 as a stable reference for your calibration set Technical data Article number: M324.001.007 GTIN: 4054469142340 ECLASS: 21170108 Category: Gauge blocks Numbers Nominal length: 1.007 mm Weight: 0.001 kg Tariff number: 90173000 Grade: 1 (DIN 861/1) Special features Material: Ceramic Precision: Grade 1 tolerance Compact, lightweight standard Application: calibration and laboratory metrology FAQ What level of precision does this gauge block offer? The ceramic gauge block 1.007 mm (Metav IndustryLine, SKU M324.001.007) is classified to Grade 1 (DIN 861/1), providing a high‑precision reference suitable for laboratory calibration and quality control tasks. Is the ceramic material suitable for regular use in a workshop environment? Yes, ceramic provides good wear resistance and corrosion resistance for regular handling, though care should be taken to avoid impacts and contamination that could affect wringing and surface quality. Can this gauge block be used within an accredited measurement chain? The block is intended as a laboratory standard and can be integrated into accredited measurement chains when accompanied by an appropriate, traceable calibration certificate supplied by a recognised calibration laboratory. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.008 mm End Gauge Grade 0 DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of the combination of a Grade 0 tolerance, the DIN EN ISO 3650 standard and a compact 1.008 mm nominal length to establish a reliable reference in calibration work; order the gauge block directly via Metav Werkzeuge or consult the Metav specialists for precise application advice Single gauge block 1.008 mm, Grade 0 (DIN EN ISO 3650) — hardened special-steel reference by Metav IndustryLine The Single gauge block 1.008 mm, Grade 0 (DIN EN ISO 3650) is a high-precision reference element intended for calibration, master-setting and dimensional verification in laboratories and workshop quality control Grade 0 tolerance (DIN EN ISO 3650) Hardened special steel construction Reference length 1.008 mm Compact cross-section 30 x 9 mm Accuracy that secures measurement chains This reference piece offers Grade 0 accuracy under the DIN EN ISO 3650 standard, providing a traceable and stable reference for comparators, micrometres and calibration benches. The nominal length of 1.008 mm is manufactured to narrow tolerance bands, which reduces uncertainty when transferring dimension standards across instruments. As a consequence, repeat measurements become more consistent and process-related rework is minimised, supporting efficient quality control workflows. Material design for long-term stability Made from hardened special steel, the block combines wear resistance with dimensional stability under normal workshop and laboratory conditions. The compact 30 x 9 mm cross-section (applicable for nominal lengths up to 10 mm) gives a rigid geometry that resists distortion during handling, while the low mass facilitates safe placement in gauge sets and holders. This construction ensures the reference remains usable over many calibration cycles, lowering total cost of ownership through extended service life. Practical application and integration into inspection routines As a fundamental reference element, the gauge block integrates seamlessly into calibration routines and setting procedures. It is suited to establish master lengths, verify micrometre zero settings and serve as a comparison standard on inspection benches. The simple geometry of this gauge block aids rapid alignment and reliable contact with measuring tips, helping to speed up routine checks and minimise operator influence on results. Conformity to the recognised standard simplifies documentation and supports procurement decisions in regulated environments. Contact Metav Werkzeuge for tailored advice on integrating this Grade 0 reference into calibration sets or to request technical details from the Metav specialists at info@metav-werkzeuge.com or by phone +49 2822 7131930 Technical data Article number: M319.01008.0 GTIN: 4054469130125 Customs tariff no.: 90173000 Facts Nominal length: 1.008 mm Tolerance grade: 0 Weight: 0.004 kg Cross-section (≤10 mm): 30 x 9 mm Special features Material: hardened special steel Standard: DIN EN ISO 3650 Category: Gauge block / End gauge Brand: Metav IndustryLine FAQ What level of accuracy does this block provide? The single gauge block meets Grade 0 accuracy according to DIN EN ISO 3650, offering tight tolerances suitable for reference and calibration tasks. Is this block suitable for use as a master standard in a workshop? Yes, the Single gauge block 1.008 mm, Grade 0 (DIN EN ISO 3650) is designed for master-setting and routine verification in both workshop and laboratory environments. What material is the gauge block made from and why does it matter? The block is forged from hardened special steel, chosen for dimensional stability and wear resistance to ensure long-term reliability during repeated calibration cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.008 mm Gauge Block Grade 1, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
The combination of DIN EN ISO 3650 conformity and Class 1 tolerance guarantees a reliable reference for calibration tasks; the hardened special steel construction provides long service life with minimal wear. Order the gauge block directly via Metav Werkzeuge for dependable delivery and traceable documentation. Gauge block 1.008 mm (DIN EN ISO 3650), Class 1 — Metav IndustryLine Gauge block 1.008 mm is a precision reference standard for calibration and setting operations in quality control, inspection and instrument adjustment environments. DIN EN ISO 3650 class 1 accuracy Hardened special steel construction Nominal length 1.008 mm Compact 30 x 9 mm cross-section Traceable accuracy for routine calibration work This precision datum is manufactured to DIN EN ISO 3650 and rated Class 1, which makes it suitable as a workshop reference for setting micrometres, callipers and gauges where repeatable dimensional control is required. The nominal length 1.008 mm is produced and inspected to tight form and size tolerances, providing a stable baseline for routine calibration procedures. The conformity to the international standard ensures compatibility with established calibration routines and audit requirements, supporting efficient quality workflows. Robust material and compact geometry for everyday handling Constructed from hardened special steel, the block resists surface wear and maintains dimensional integrity under normal workshop conditions. Its compact 30 x 9 mm cross-section (applicable for nominal lengths ≤ 10 mm) and low mass make it easy to position on small fixtures and in tight assemblies without compromising stiffness. The combination of material hardness and compact geometry reduces the risk of handling-induced deformation, thereby extending the usable life of the reference piece and lowering the frequency of replacement. Wide applicability in inspection and tool setting Designed as a practical reference standard, the block is suited to production inspection, toolroom set‑up and comparative measurements where a precise short gauge is required. The small footprint allows integration into fixture checks and gauge blocks stacks, while retaining a stable reference for dimension transfer and instrument verification. For procurement and inventory control the article is listed as M319.01008.1 and carries a GTIN for traceability in technical documentation and stock systems. For traceable, class‑leading accuracy choose the Metav IndustryLine gauge block and contact Metav Werkzeuge in Emmerich for specification advice, delivery options and documentation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M319.01008.1 GTIN: 4054469130132 Standard: DIN EN ISO 3650 Nominal length: 1.008 mm Material: Special steel, hardened Tolerance class: 1 Weight: 0.004 kg Tariff number: 90173000 Facts Nominal length: 1.008 mm Cross-section (nominal ≤ 10 mm): 30 x 9 mm Weight: 0.004 kg Tolerance class: 1 (DIN EN ISO 3650) Special features Hardened special steel construction Conforms to DIN EN ISO 3650 class 1 Compact cross-section for small assemblies Suitable as workshop reference standard SKU: M319.01008.1 FAQ What level of accuracy does this gauge block provide? The gauge block 1.008 mm meets DIN EN ISO 3650 requirements and is specified as Class 1, providing a high level of dimensional accuracy for workshop and inspection use. Which material is used for the block and what are the benefits? The block is made from hardened special steel, which improves wear resistance and dimensional stability during normal handling and stacking. Can this block be used for instrument calibration and setting tools? Yes, the gauge block 1.008 mm (M319.01008.1) is intended as a reference standard for setting micrometres, callipers and comparators in production and quality‑control environments. Is the cross-section suitable for small fixtures? The compact 30 x 9 mm cross-section (applicable to nominal lengths up to 10 mm) is designed for use in confined spaces and small fixtures without sacrificing stiffness. How is the item identified for inventory and documentation? This article is listed as M319.01008.1 and carries GTIN 4054469130132 for traceability and integration into inventory systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.008mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of the combination of ceramic construction, Grade 1 accuracy and a compact nominal size to secure a stable calibration reference for fine inspection tasks; order directly via Metav Werkzeuge or consult the team for further specification support. Metav IndustryLine Ceramic End Gauge 1.008 mm (Grade 1 DIN 861/1) The Metav IndustryLine Ceramic End Gauge 1.008 mm is a precision reference gauge designed for dimensional verification and calibration in inspection and laboratory environments. Precision ceramic for excellent wear resistance Nominal size 1.008 mm for fine calibration tasks Grade 1 accuracy to DIN 861/1 Compact, ultra-light at 0.001 kg Consistent measurement as a reliable calibration reference The gauge offers Grade 1 accuracy in accordance with DIN 861/1, making it suitable as a stable reference in routine calibration and visual inspection work. Manufactured from ceramic, the standard blocks a common source of measurement drift: thermal expansion is significantly lower than that of many metals, which reduces dimensional shifts when ambient temperature varies. The combination of a defined nominal size of 1.008 mm and ceramic stability yields a reference that maintains its form during repeated contact-based checks, enabling faster verification cycles and fewer retests in the quality workflow. Small footprint with big benefit for inspection workflows A compact reference like this is especially valuable on busy benches where space and handling speed matter. At just 1.008 mm nominal dimension and weighing 0.001 kg, the component integrates easily into high-density sets of gauges and nests neatly into precision trays. Its low mass reduces the risk of accidental damage during handling, while the wear-resistant surface extends service intervals. For production environments that require rapid go/no-go checks or frequent comparative measurements, this standard reduces process interruptions and supports a more efficient inspection routine. Durability and suitability for metrology applications Ceramic construction gives the gauge pronounced wear resistance and outstanding surface hardness without susceptibility to corrosion. These properties make the standard a sound choice for laboratories and toolrooms that demand long-term dimensional stability from reference parts. The item is supplied as a single ceramic end gauge for direct integration into existing comparator setups; calibration services and traceable certificates can be arranged if formal documentation is needed for quality systems. The product supports reliable, repeatable measurements that underpin confident decision-making in component acceptance and tool verification. For assured traceability and dependable supply of this Metav IndustryLine ceramic reference, contact Metav Werkzeuge in Emmerich to discuss ordering and documentation options. Technical data SKU: M324.001.008 GTIN: 4054469142357 Tariff number: 90173000 Weight: 0.001 kg Facts Nominal size: 1.008 mm Grade: 1 (DIN 861/1) Material: Ceramic Special features Application: calibration and dimensional verification Compact size for bench and laboratory use High wear resistance and low thermal expansion FAQ What accuracy class does this gauge conform to? The Metav IndustryLine Ceramic End Gauge 1.008 mm conforms to Grade 1 as specified in DIN 861/1, providing a recognised reference level for inspection tasks. Is the ceramic end gauge suitable for temperature-sensitive measurements? Yes, the ceramic material used in the Metav IndustryLine gauge exhibits low thermal expansion compared with many metals, improving dimensional stability during routine temperature fluctuations. Can the gauge be supplied with a calibration certificate? Calibration and traceable certification can be arranged for the Metav IndustryLine ceramic end gauge on request; confirmation of scope and documentation should be requested at the time of order. What are typical applications for this 1.008 mm ceramic reference? The gauge is intended for laboratory and workshop use in calibration, comparator checks and fine dimensional verification where a small, stable reference dimension is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.009 mm End Gauge Grade 0 DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of the combination of DIN EN ISO 3650 Grade 0 accuracy, hardened special steel construction and compact format for reliable dimensional checks and long service life. Order the gauge directly via Metav Werkzeuge or contact our consultants for application advice. Single end gauge 1.009 mm, DIN EN ISO 3650, Grade 0 — Metav IndustryLine The Single end gauge 1.009 mm, DIN EN ISO 3650, Grade 0 is a precision reference standard intended for dimensional verification and calibration tasks in workshops and inspection labs. DIN EN ISO 3650 Grade 0 accuracy Hardened special steel construction Nominal size 1.009 mm reference standard Ensure measurement certainty with an ISO-grade reference A Grade 0 end gauge manufactured to DIN EN ISO 3650 provides a stable, reproducible length standard for routine checks and instrument verification. As a fixed-length reference of 1.009 mm, this piece serves as a point of comparison for calipers, micrometres or optical systems and helps to reduce measurement uncertainty across production and quality-control workflows. The clearly defined tolerance band associated with the standard supports compliance documentation and simplifies acceptance criteria during incoming inspection and in-process checks. Built for wear resistance and convenient handling Constructed from hardened special steel, the gauge offers resistance to abrasion and dimensional drift under normal workshop conditions. Its compact cross-section (up to 10 mm: 30 x 9 mm; from 10.1 mm: 35 x 9 mm) and minimal mass facilitate quick handling and positioning on inspection benches or inside gauges. The robust surface finish and material choice ensure that the reference dimension remains consistent over repeated use, which lowers rework rates and extends the service interval between any required recalibrations. Designed for integration into quality systems and traceability This end gauge is supplied with clear identification (SKU M319.01009.0, GTIN 4054469130149), which supports traceable tool management and inventory control in structured quality systems. The standard conformity allows straightforward insertion into calibration routines and documentation chains. Backed by Metav’s presence in Emmerich as a quality filter for the European market, the product benefits from a partner network that values reproducibility and dependable supply — attributes that streamline procurement and reduce supplier risk for industrial and craft buyers alike. For precision-critical processes, request the M319.01009.0 single end gauge from Metav Werkzeuge for seamless integration into inspection routines — call +49 2822 7131930 or email info@metav-werkzeuge.com for detailed technical guidance. Technical data SKU: M319.01009.0 GTIN: 4054469130149 Category: End gauges Numeric data Nominal size: 1.009 mm Weight: 0.004 kg Tariff number: 90173000 Materials & features Material: Special steel, hardened Standard: DIN EN ISO 3650 Grade: 0 Cross-section: up to 10 mm: 30 x 9 mm; from 10.1 mm: 35 x 9 mm FAQ What level of accuracy does this gauge provide? The single end gauge meets DIN EN ISO 3650 Grade 0 requirements; the M319.01009.0 is suitable as a laboratory‑grade reference for precision checks and conformity assessments. Which material is used and how durable is it? Manufactured from hardened special steel, the gauge offers high wear resistance and stable dimensions under normal inspection use, ensuring long‑term durability. For which tasks is a 1.009 mm end gauge suitable? The 1.009 mm reference is ideal for short‑range dimensional checks, verification of micrometres and calipers, and for use as a master standard in routine inspection procedures. How should the gauge be stored and handled to preserve accuracy? Keep the gauge dry, clean and protected from shocks; store it in a protective sleeve or compartment to avoid surface damage and contamination that could affect the reference dimension. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.009 mm Gauge Block Grade 1, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Taking advantage of the combination of DIN EN ISO 3650 conformity, a hardened special steel body and a compact cross-section ensures reliable repeatability and long service life; order this precision gauge block directly via Metav Werkzeuge or consult the technical advisers for application support. Gauge block 1.009 mm — precision length standard, DIN EN ISO 3650, Grade 1 (Metav IndustryLine) A gauge block 1.009 mm designed as a compact, high‑precision reference for inspection benches, calibration work and workshop setups Precision class 1, DIN EN ISO 3650 Hardened special steel construction Compact cross-section 30 x 9 mm Repeatable length standards for robust quality control This compact length standard delivers a nominal size of 1.009 mm under the internationally recognised DIN EN ISO 3650 system, offering a stable reference point for dimensional checks. As a Grade 1 block, it supports high‑precision comparative measurements and setting tasks where reproducibility is essential. The use of an industry standard gauge block simplifies traceability in measurement chains and reduces setup time when configuring micrometres, comparator jaws or dial gauges. Durable construction to withstand frequent handling Manufactured from special steel and hardened for wear resistance, the block retains form and flatness through repeated stacking and wringing operations. The compact 30 x 9 mm cross-section for sizes up to 10 mm gives a favourable stiffness‑to‑mass ratio, minimising deformation when handled and improving tactile control during wringing and alignment. As a consequence, maintenance intervals are extended and dimensional stability remains high even under regular workshop use. Seamless integration into inspection and calibration workflows The design suits integration into both routine workshop inspections and metrology laboratories: the block functions as a reference for setting measuring instruments and as a check standard for comparison tests. Lightweight at 0.004 kg, it is convenient to handle within gauge sets and for precision assembly tasks. Clear identification and a stable reference dimension accelerate inspection routines, improving throughput without compromising measurement confidence. Practical considerations for storage and use Although compact, proper handling and storage extend performance: use a clean, dry gauge box and avoid contaminants on wringing faces to preserve flatness. The block’s conformity to DIN EN ISO 3650 and its Grade 1 classification make it suitable as an element in a calibrated set; for applications requiring accredited traceability, request a factory calibration certificate or discuss calibration options with Metav Werkzeuge’s specialists to ensure compliance with internal quality systems. For ordering and tailored advice on the Metav IndustryLine gauge block 1.009 mm (SKU M319.01009.1) contact Metav Werkzeuge directly — Metav’s advisers provide specification guidance and delivery from Emmerich to support reliable measurement setups Technical Data Article number: M319.01009.1 GTIN: 4054469130156 Material: Special steel, hardened Nominal size: 1.009 mm Standard: DIN EN ISO 3650 Grade: 1 Facts Weight: 0.004 kg Cross-section: 30 x 9 mm (for sizes ≤ 10 mm) ECLASS: 21170108 Customs tariff number: 90173000 Special features Precision gauge block for length standards Compact format for fine measurements Suitable as a reference in inspection and calibration FAQ What tolerance class does this gauge block meet? The block meets Grade 1 tolerances as specified in DIN EN ISO 3650, providing a high level of precision suitable for workshop and laboratory checks. Is the material corrosion‑resistant? The gauge block is made from special steel, hardened; for enhanced corrosion protection, appropriate storage and optional protective treatments should be considered depending on the workshop environment. Can this block be used to set micrometres and callipers? Yes; the 1.009 mm gauge block is intended as a reference for setting and checking micrometres, callipers and comparator jaws as part of standard inspection procedures. Does the product include a calibration certificate? A standard delivery does not automatically include an accredited calibration certificate. For accredited traceability or certification requirements, request a calibration service from Metav Werkzeuge. Which applications suit this compact gauge block? The compact 30 x 9 mm format is ideal for fine mechanical work, routine inspection and incorporation into gauge sets where small, precise reference lengths are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.009mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Combine ceramic stability, Grade 1 accuracy and a precisely defined 1.009 mm nominal size for a reliable reference piece in calibration chains; order directly via Metav Werkzeuge or request advice from our consultants. Ceramic gauge block 1.009 mm (Grade 1, DIN 861/1) – Metav IndustryLine Ceramic gauge block 1.009 mm (Grade 1, DIN 861/1) is a compact precision standard for dimensional verification and calibration tasks in metrology laboratories and precision workshops. Grade 1 accuracy according to DIN 861/1 Non-magnetic ceramic construction Traceable nominal size 1.009 mm Reference accuracy for reproducible inspection results The product serves as a high-stability reference for routine checks and comparative measurements. Produced to Grade 1 under DIN 861/1, the end standard provides a predictable nominal length of 1.009 mm for use in inspection benches and calibration procedures. This level of specification supports consistent quality control steps and helps reduce measurement scatter when incorporated into standardised test sequences. Ceramic core that preserves dimensional integrity A ceramic construction brings clear benefits for a reference artefact: low thermal expansion and inherent wear resistance reduce drift during repeated use. The non-magnetic nature of the material prevents magnetic interference with nearby instruments and fixtures, while the low mass contributes to easy handling during stack assembly. These material properties translate directly into less frequent recalibration and more time spent on value‑adding measurement tasks. Built for stable workflows and easy integration Designed as an end standard, the component integrates smoothly into gauge blocks sets and calibration routines. Its compact geometry and precise nominal value make it suitable for establishing short‑range references, comparing micrometres or verifying setting instruments. The lightweight construction facilitates rapid mounting and demounting on measuring rigs, supporting efficient throughput in busy metrology rooms without compromising repeatability. Care and documentation for long service life Handling precautions preserve the reference surface and accuracy: avoid shocks, keep surfaces clean, and store the block in a protective case when not in use. Regular verification against a higher‑order standard maintains traceability of measurement results. Assistance with technical integration, documentation or measurement strategies is available from Metav Werkzeuge to ensure the component fulfils its role in a certified quality process. Contact Metav Werkzeuge today to secure this Grade 1 ceramic reference standard from Metav IndustryLine and discuss delivery or calibration advice tailored to metrology requirements Technical Data Article number: M324.001.009 GTIN: 4054469142364 Category: Endmasse Facts Nominal size: 1.009 mm Weight: 0.001 kg Customs tariff: 90173000 Special features Material: Ceramic Grade: 1 (DIN 861/1) Brand: Metav IndustryLine FAQ What accuracy standard does this reference meet? The ceramic gauge block meets Grade 1 accuracy according to DIN 861/1, providing a defined nominal length of 1.009 mm for reference and verification tasks. Is the block suitable for magnetic environments? Yes. The ceramic construction is non‑magnetic, making it appropriate for use near sensitive instruments that would be affected by ferrous standards. How should the reference be stored to maintain accuracy? Store the block in a protective case, keep surfaces clean and avoid impacts; routine comparison against a higher‑order standard is recommended to preserve traceability. Can this standard be used in routine workshop quality control? The block is suitable for metrology benches and precision workshops as a short‑range reference, supporting reproducible checks and instrument verification. What documentation is provided with the end standard? Product identification and traceable data such as article number and GTIN accompany the item; for bespoke documentation needs, Metav Werkzeuge can advise on suitable certification workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.01 mm Gauge Block Set Grade 1, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
Take advantage of the combination of DIN EN ISO 3650 conformity, Grade 1 accuracy and a hardened special steel body to secure repeatable, traceable measurements in workshop and laboratory environments. Order the gauge block directly via Metav Werkzeuge or consult the Metav metrology team for specification support. Gauge block 1.01 mm — Grade 1, DIN EN ISO 3650 (Metav IndustryLine) The Gauge block 1.01 mm is a precision end gauge designed for high-accuracy dimensional checks and traceable calibration work in workshops and calibration laboratories. DIN EN ISO 3650 certified Grade 1 Nominal size 1.01 mm for fine calibration Hardened special steel construction Compact cross-section 30 x 9 mm Consistent accuracy for traceable results The block complies with DIN EN ISO 3650 and is manufactured to Grade 1 tolerances, delivering the repeatability required for routine calibration and inspection tasks. This standardised specification ensures compatibility with national and international measurement chains, so measurement uncertainty is reduced and documentation aligns with quality management systems. The small 1.01 mm nominal size is optimised for fine adjustments and reference standards where sub-millimetre precision is needed. Durable material for long service life Machined from hardened special steel, the block resists wear and preserves its datum faces through repeated stacking and use. The choice of material and heat treatment improves surface stability and dimensional retention, lowering the frequency of rework or replacement. The robust finish supports reliable contacting and minimal surface degradation, which is essential for maintaining calibration intervals and ensuring consistent comparison readings over time. Space-saving geometry for versatile handling With a compact cross-section of 30 x 9 mm, the block is easy to handle, stack and integrate into existing sets or test rigs without occupying excessive bench space. Its low mass and precise edges simplify combination measurements and make it suitable for checking micro-components or as a reference in comparative setups. The compact form also helps to reduce thermal mass, allowing quicker equilibration to ambient temperature and more stable short-term measurements. Practical use cases and measurement workflow Ideal for routine verification, gauge block sets and comparative calibration, the component supports tasks from workshop quality checks to production spot inspections. Its Grade 1 accuracy is appropriate where high reliability is required but ultra-high laboratory precision is not necessary. When used as part of a controlled metrology routine, the block contributes to an auditable measurement chain and helps maintain product tolerances without over-specifying resources. For traceable calibration or to discuss how this Metav IndustryLine gauge block (M319.0101.1) fits into existing quality workflows, contact Metav Werkzeuge for tailored advice and order support. Technical data Article number: M319.0101.1 GTIN: 4054469130170 SKU: M319.0101.1 Material: Spezialstahl, gehärtet Nominal size: 1.01 mm Standard: DIN EN ISO 3650 Grade: 1 Weight: 0.004 kg Cross-section: up to 10 mm → 30 x 9 mm Tariff number: 90173000 Core specifications Nominal size: 1.01 mm Cross-section: 30 x 9 mm Weight: 0.004 kg Grade: 1 (DIN EN ISO 3650) Tariff number: 90173000 Special features DIN EN ISO 3650 compliance Hardened special steel body Designed for fine calibration and stacking Compact geometry for micro applications Suitable for workshop and calibration use FAQ What is the intended use of this gauge block? The gauge block 1.01 mm (Metav IndustryLine, M319.0101.1) is intended as a precision reference for dimensional checks, comparative calibration and integration into gauge block sets for workshop and laboratory metrology. Does this block meet a recognised standard? Yes. The block is manufactured to DIN EN ISO 3650 and meets Grade 1 requirements, providing standardised accuracy suitable for many industrial measurement tasks. What material is the block made from and why does it matter? The block is made from hardened special steel, which offers enhanced wear resistance and dimensional stability under normal workshop conditions, helping to extend service life and reduce recalibration frequency. Can the block be used for stacking to create larger references? Yes. The compact 30 x 9 mm cross-section and precision faces make the block suitable for stacking combinations to produce larger reference lengths within the limits of Grade 1 accuracy. Is the product suitable for laboratory-grade calibration? The Grade 1 specification makes the block appropriate for many calibration tasks and workshop verification; for sub-micron laboratory work, higher-grade or specialised laboratory blocks may be recommended. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.01 mm Gauge Block Single-End, Grade 0, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of the combination of Grade 0 accuracy, hardened construction and a compact cross-section for dependable reference measurements in calibration labs and precision workshops. Order the gauge block directly via Metav Werkzeuge or consult their specialists for integration into existing measurement sets. Single gauge block 1.01 mm – Grade 0, hardened special steel (Metav IndustryLine) A single gauge block 1.01 mm intended as a traceable length standard and workshop reference for high-precision dimensional checks in accordance with DIN EN ISO 3650 Grade 0 accuracy to DIN EN ISO 3650 Hardened special steel for long service life Compact 30×9 mm cross-section for stability Exact nominal size 1.01 mm, low mass Precision where it matters The Grade 0 classification and compliance with DIN EN ISO 3650 ensure this gauge block serves as a reliable length standard for calibration and comparative measurements. At a nominal size of 1.01 mm, the block provides a defined, certified step in a gauge set that aids repeatable zeroing and verification of micrometres, calipers and other length-measuring instruments. The standard-based tolerance band means assessment and documentation of measurement uncertainty can be performed with confidence, supporting quality control procedures and audit trails. Built for repeatable measurement and handling Manufactured from hardened special steel, the specimen resists wear and preserves surface flatness over repeated use, which reduces drift in reference dimensions. The compact cross-section (for this size: 30×9 mm) offers a stable contact area while keeping mass low (approximately 0.004 kg), making positioning and stacking straightforward during multi-block setups. This robustness translates into fewer re-measurements and more consistent readings in day-to-day workshop or laboratory routines. Integration into calibration workflows and gauge sets As a single element within professional gauge block inventories, this slip gauge can be combined into stacks to produce a wide range of calibration values. The clear identification via SKU M319.0101.0 and GTIN 4054469130163 simplifies inventory management and traceability across quality systems. Owing to its familiar geometry and material, it is compatible with standard wringing techniques and routine maintenance practices, facilitating quick incorporation into existing measurement procedures without special adaptations. For dependable dimensional standards from Metav IndustryLine, request further specification sheets or place an order through Metav Werkzeuge GmbH in Emmerich — contact info@metav-werkzeuge.com or call +49 2822 7131930 for precision advice and supply details. Technical data SKU: M319.0101.0 GTIN: 4054469130163 Standard: DIN EN ISO 3650 Nominal size: 1.01 mm Facts Weight: 0.004 kg Cross-section (for sizes ≤ 10 mm): 30 × 9 mm Customs tariff number: 90173000 Materials & features Material: Hardened special steel Grade: 0 Category: Gauge block (single end measure) Compliance: DIN EN ISO 3650 FAQ What level of accuracy does this gauge block provide? The gauge block is manufactured to Grade 0 tolerance according to DIN EN ISO 3650, offering a dimensional reference suitable for precision workshop calibration and comparative checks with defined tolerance limits. Can this gauge block be used in a standard gauge block set? Yes, this single gauge block (SKU M319.0101.0) is designed to wring and stack with conventional gauge blocks and integrates into existing sets for generating composite lengths. What material is used and how does it affect wear? The block is made from hardened special steel, which increases surface hardness and wear resistance, supporting long-term dimensional stability under normal laboratory and workshop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.01mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of the combination of ceramic stability, Grade 1 accuracy and a compact 1.01 mm reference length for repeatable dimensional control in inspection and calibration tasks; order the Ceramic gauge block 1.01 mm directly via Metav Werkzeuge or request further specification details from the consultants. Ceramic gauge block 1.01 mm — Grade 1 reference standard, DIN 861/1 — Metav IndustryLine The Ceramic gauge block 1.01 mm is a compact reference length designed for precision measurement tasks in metrology labs and quality control environments. Ceramic construction for thermal stability Grade 1 accuracy to DIN 861/1 Nominal length 1.01 mm reference Compact, low-weight precision standard A dependable baseline for dimensional control As a Grade 1 reference created to DIN 861/1, this 1.01 mm block provides a stable baseline for comparative measurements and calibration benches. The tight manufacturing tolerances associated with Grade 1 make the block suitable where reproducible reference lengths are required; users benefit from a concise, verifiable standard that supports consistent instrument checks. Delivered as a single, lightweight standard, the component reduces setup time when establishing measurement chains for micrometres, calipers or comparator fixtures. Why ceramic improves repeatability Constructed from ceramic, the block combines low thermal expansion with high surface hardness, which together reduce dimensional drift and surface wear over repeated use. Ceramic materials resist corrosion and are electrically insulating, helping to prevent galvanic effects that can alter readings in mixed‑material stacks. These material properties mean fewer ambient‑temperature corrections and longer intervals between replacement, supporting reliable day‑to‑day repeatability in both workshop and laboratory contexts. Practical integration into quality routines This reference standard is intended for integration into established calibration and inspection workflows. The 1.01 mm nominal length allows straightforward use as a check standard for fine resolutions, and the compact form factor supports rapid exchange in gauge sets or on measurement benches. Handling recommendations such as using clean gloves and wringing techniques maintain the polished surfaces and ensure consistent contact geometry, thereby preserving the block’s role as a trustworthy reference standard within traceable measurement processes. Handling, maintenance and longevity Routine care extends service life: keep the block in a dry, clean environment, avoid hard impacts and remove particulate contamination before use. Lightly oiling contact surfaces for storage can reduce corrosion risk to adjacent steel tools, although the ceramic itself resists most chemical attack. When stacked or wrung with other gauge blocks, ensure surfaces are free from debris to preserve accuracy and avoid accelerated surface wear; these simple practices protect the block’s dimensional integrity and ensure continued performance across inspection cycles. For assistance with selecting the correct Grade 1 ceramic reference or to discuss supply options from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for expert advice and reliable delivery support Technical data Article number: M324.001.01 GTIN: 4054469142388 Material: Ceramic Nominal length: 1.01 mm Grade: 1 (DIN 861/1) Weight: 0.001 kg Tariff code: 90173000 Facts Nominal length: 1.01 mm Weight: 0.001 kg Tariff code: 90173000 Special features Ceramic material Grade 1 accuracy to DIN 861/1 Category: Gauge blocks SKU: M324.001.01 Image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/b2/cf/f4/62/62f4cfb2f7641fb8f142d9ce/m3240005-main.jpg FAQ What does Grade 1 signify for accuracy? Grade 1 indicates a high level of manufacturing precision under DIN 861/1, making the Ceramic gauge block 1.01 mm appropriate for use as a reliable reference in routine inspection and calibration tasks. Is ceramic suitable for regular workshop use? Yes; the ceramic composition of this gauge block offers thermal stability and surface hardness that make it suitable for regular checks, though care should be taken to avoid shocks that can chip brittle materials. How should the gauge block be handled to preserve accuracy? Handle the block with clean gloves or soft tweezers, keep surfaces free of oil and particles, and store it in a clean, dry location to prevent contamination and ensure consistent wringing behaviour. Which types of measurements can this block support? The block serves as a fixed reference length for calibrating micrometres, verniers and comparator set‑ups, and for establishing short traceable lengths in gauge sets. What identification data does this block carry? The Ceramic gauge block 1.01 mm is listed under SKU M324.001.01 and GTIN 4054469142388 for unambiguous inventory and documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.02 mm Gauge Block, Hardened Special Steel, DIN EN ISO 3650 Grade 0 - Metav IndustryLine
Choose a Grade 0 single gauge block in hardened special steel for a compact, traceable reference standard that supports reliable inspection and repeatable measurements; order directly via Metav Werkzeuge or contact our consultants for technical advice. Single gauge block 1.02 mm (Grade 0) – hardened special steel, DIN EN ISO 3650 Single gauge block 1.02 mm designed as a precision reference for calibration tasks and laboratory or workshop inspection work Grade 0 accuracy to DIN EN ISO 3650 Hardened special steel construction Compact cross-section 30 x 9 mm for small-size checks Low mass 0.004 kg eases handling and storage Stable reference for high-accuracy inspection A Grade 0 gauge block provides a consistent dimensional reference where measurement uncertainty must be minimised. The block’s 1.02 mm nominal size and conformity to DIN EN ISO 3650 make it suitable as a master standard in calibration routines and quality control sampling. Because the component is manufactured to a tight grade, it supports reliable comparative checks and reduces variability in repeated measurements. This stability translates into faster decision-making on production tolerances and fewer downstream rework cycles. Robust materials for long-term repeatability Manufactured from hardened special steel, the block resists wear and maintains form under normal workshop conditions. The small cross-section of 30 x 9 mm (applies to nominal sizes up to 10 mm) combines good rigidity with compactness, allowing stable placement on inspection benches and straightforward integration into existing gauge block sets. The low mass (approximately 0.004 kg) simplifies handling during manual inspection steps, while the choice of material ensures dimensional persistence across many cycles of use. Practical use in calibration and inspection workflows This precision unit is intended for use as a standalone reference or as part of a set for comparative measurement tasks. The nominal dimension is clearly identified and the Grade 0 specification supports traceable documentation within quality records. The block is suitable for laboratory checks, routine shop-floor verifications and as a transfer standard between instruments. Clear identification and standard conformity aid process documentation and auditability in regulated environments. For Metav IndustryLine gauge blocks and tailored metrology advice, contact Metav Werkzeuge for expert guidance and reliable supply of calibration-grade measuring standards Technical data SKU: M319.0102.0 GTIN: 4054469130187 Label: Single gauge block 1.02 mm, DIN EN ISO 3650, Grade 0 Facts Nominal size: 1.02 mm Weight: 0.004 kg Cross-section: 30 x 9 mm (for nominal sizes ≤ 10 mm) Tariff number: 90173000 ECLASS: 21170108 Special features Material: hardened special steel Standard: DIN EN ISO 3650 Grade: 0 Category: Gauge blocks FAQ What applications suit this Grade 0 gauge block best? The Grade 0 single gauge block is intended for calibration references, laboratory standards and routine inspection where a high level of dimensional accuracy and conformity to DIN EN ISO 3650 is required. Is the material specification suitable for regular workshop use? Yes. The block’s hardened special steel construction is designed for durability and repeated handling in workshop and laboratory environments while preserving dimensional stability. How is the block identified for inventory and traceability? Identification is supported by the SKU M319.0102.0 and GTIN 4054469130187; these enable straightforward tracking in quality systems and stock records. Can the gauge block be used as part of a set or only as a single reference? The block is suitable both as a standalone reference and for use within gauge block sets, serving transfer and comparative measurement tasks in inspection workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.02mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of the combination of Grade 1 accuracy, ceramic thermal stability and wear resistance for a reliable reference standard in calibration and quality control. Order the article directly via Metav Werkzeuge or consult the Metav team for application advice and supply options. Ceramic gauge block 1.02 mm — Grade 1 reference standard with thermal stability (Metav IndustryLine) Ceramic gauge block 1.02 mm — Grade 1 (DIN 861/1) offers a compact, thermally stable reference for precise length calibration and high‑stability metrology tasks. Grade 1 accuracy to DIN 861/1 Ceramic with low thermal expansion Nominal size 1.02 mm for fine calibration Lightweight 1 g for controlled handling Stable reference and proven accuracy for laboratory use The Ceramic gauge block 1.02 mm, Grade 1 (DIN 861/1) serves as a compact reference standard where reproducible small‑length measurements matter. The ceramic composition reduces thermal drift compared with many metallic masters, so measured values remain stable when ambient temperature varies. Conformance to DIN 861/1 and the Grade 1 tolerance class provides a clearly defined accuracy level that supports traceable comparisons during routine quality checks and equipment verification. Easy integration into measurement stacks and calibration routines With a nominal size of 1.02 mm and minimal mass (1 g), this block integrates easily into gauge block stacks, comparator set‑ups and calibration fixtures. The small footprint and consistent geometry enable precise placement for end‑measurements and for checking the calibration of micrometers and callipers. The reduced thermal sensitivity helps to keep uncertainty low during short‑term handling, improving process efficiency when setting or checking reference tools. Long‑term stability and care benefits from ceramic material The ceramic construction combines high hardness with corrosion‑free behaviour, offering wear‑resistant contact faces that maintain form over many measurement cycles. Compared with standard steel blocks, ceramic masters are less prone to surface oxidation and require only gentle cleaning with lint‑free cloth and approved solvents. Proper handling and storage in a protective tray or case preserve the measuring faces and ensure consistent performance over time. Suitable uses and decision criteria for workshops and labs This compact gauge block is particularly suitable for metrology departments, calibration workshops and precision‑engineering shops that require accurate short‑range standards for quality control. The combination of Grade 1 tolerance and ceramic stability makes it an appropriate choice when a durable, low‑maintenance reference is needed for frequent checks and instrument verification. Consider this block when a small, thermally stable standard is preferable to heavier metallic masters. Choose the Metav IndustryLine ceramic gauge block for stable reference measurements and contact Metav Werkzeuge in Emmerich for tailored technical guidance and supply arrangements Technical Data Article number: M324.001.02 Label: Ceramic gauge block 1,02mm, Grade 1 DIN 861/1 GTIN: 4054469142395 Tariff number: 90173000 Category: Gauge blocks Facts Nominal size: 1.02 mm Grade: 1 Weight: 0.001 kg Special features Material: Ceramic Conforms to DIN 861/1 SKU: M324.001.02 FAQ What tolerance and standard does this gauge block meet? The gauge block meets Grade 1 tolerances in accordance with DIN 861/1, providing a defined accuracy class suitable for routine laboratory checks and workshop verifications. Is ceramic preferable to steel for short reference standards? Ceramic offers lower thermal expansion and is corrosion‑free, making the ceramic gauge block a strong choice for stable short‑range references where reduced drift and long‑term surface integrity are required. Can this block be used to calibrate micrometers and callipers? Yes, the 1.02 mm nominal size is frequently used as a master element when calibrating micrometers and callipers or when building precise gauge block stacks for comparative measurements. How should the ceramic gauge block be cleaned and stored? Clean with a lint‑free cloth and suitable solvent, avoid abrasives and hard knocks, and store in a protective tray or case to preserve the measuring faces and maintain measurement reliability. Which applications are best suited to this compact reference standard? The block is ideal for metrology labs, calibration benches and precision workshops that need a compact, thermally stable standard for quality control and instrument verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.02mm Gauge Block Grade 1, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Precision control and traceability are combined in this Grade 1 end gauge: 1.02 mm nominal size and DIN EN ISO 3650 conformity deliver repeatable dimensional checks and robust wear resistance. Order the end gauge directly via Metav Werkzeuge or consult our specialists if application advice is required. End gauge 1.02 mm — Grade 1 to DIN EN ISO 3650 | Metav IndustryLine The End gauge 1.02 mm is a compact precision gauge for dimensional verification and acceptance testing in calibration and inspection workflows. Grade 1 accuracy to DIN EN ISO 3650 Hardened special steel construction Exact nominal size 1.02 mm Traceable GTIN 4054469130194 Reliable tolerance assurance for production and inspection A Grade 1 finish according to DIN EN ISO 3650 provides a clearly defined tolerance band for small-diameter reference measurements. The nominal 1.02 mm dimension is manufactured and inspected to tight limits so that measurements remain dependable during routine verification. For quality managers and inspection technicians this means fewer disputes over accept/reject decisions and a consistent baseline for process capability studies. The compact form supports rapid handling while maintaining the dimensional integrity required for acceptance testing. Built to resist wear and remain stable during repeated use Constructed from hardened special steel, the gauge resists abrasion and maintains its geometry under frequent engagement. The specified cross-section (30×9 mm for sizes up to 10 mm; larger variants from 10.1 mm use 35×9 mm) balances stiffness with ergonomic handling, reducing deflection during insertion. Low mass (approx. 0.004 kg) minimises operator fatigue without compromising surface contact quality. These material and design choices extend service intervals and reduce the need for frequent replacement, supporting uninterrupted measurement routines. Traceability and identification for quality systems Identification and traceability are straightforward: the product is listed under SKU M319.0102.1 and GTIN 4054469130194, enabling easy inventory control and audit trails. As a standardised end measure to DIN EN ISO 3650, the gauge integrates smoothly into calibration schedules and quality documentation. The compact format is suited for both bench inspection and subcontractor checks, ensuring that components meet specification before assembly or dispatch and supporting smoother supplier acceptance processes. For reliable dimensional control using Metav IndustryLine precision, contact Metav Werkzeuge to request the Grade 1 end gauge M319.0102.1 or to discuss application-specific selection and handling advice. Technical Data Article number: M319.0102.1 Label: End gauge 1.02 mm, DIN EN ISO 3650, Grade 1 GTIN: 4054469130194 Manufacturer: Metav IndustryLine Facts Nominal size: 1.02 mm Material: Special steel, hardened Weight: 0.004 kg Cross-section: up to 10 mm → 30×9 mm; from 10.1 mm → 35×9 mm Tariff code: 90173000 Grade: 1 Standard: DIN EN ISO 3650 Special features Compact, wear-resistant design Suitable for inspection and acceptance testing Listed SKU: M319.0102.1 Category: End gauges / End measures FAQ What tolerance class does this gauge satisfy? The gauge meets Grade 1 tolerance as specified in DIN EN ISO 3650, providing a clearly defined acceptance band for precise dimensional checks. Which material is used for the gauge and why? The gauge is made from hardened special steel, chosen for its wear resistance and dimensional stability during repeated inspections. Is this gauge suitable for routine workshop inspections? Yes. The compact format and robust finish make it suitable for bench and workshop use, and the item is listed under SKU M319.0102.1 for straightforward procurement. How can this gauge be traced in inventory and audits? Traceability is enabled via GTIN 4054469130194 and the SKU M319.0102.1, supporting inventory management and audit documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.03 mm Gauge Block Single-End, Hardened Special Steel, DIN EN ISO 3650 Grade 0 - Metav IndustryLine
The combination of DIN EN ISO 3650 conformity, Grade 0 tolerance and hardened special steel construction delivers a stable reference standard for routine inspection and device set-up; order directly via Metav Werkzeuge or consult the specialists for integration into existing gauge sets. Single end gauge 1.03 mm (DIN EN ISO 3650, Grade 0) — Hardened special steel reference standard A Single end gauge 1.03 mm designed as a compact, high-precision reference for calibration tasks, incoming inspection and dimensional verification in workshop and quality environments DIN EN ISO 3650 certified Grade 0 Nominal size 1.03 mm, high reference accuracy Hardened special steel construction Compact cross-section for easy handling Consistent reference accuracy for inspection and calibration As a laboratory-grade reference, this end gauge is manufactured to DIN EN ISO 3650 and delivered in Grade 0, which defines tight manufacturing tolerances suitable for precision measurement tasks. The 1.03 mm nominal size provides a stable datum for setting small instruments or checking micro-features. Compliance with the standard ensures interchangeability and predictable behaviour when used alongside other standardised gauges, reducing uncertainty in routine quality-control procedures. Durable construction with compact handling benefits The body is made from hardened special steel, selected to resist wear and maintain dimensional stability over repeated use. The compact cross-section for sizes up to 10 mm is 30 x 9 mm, combining a low mass (0.004 kg) with sufficient stiffness for reliable contact measurements. This geometry simplifies handling and storage while keeping the gauge robust enough for daily shop-floor use, so reference points remain reproducible without frequent replacement. Easy integration into gauge sets and traceable workflows The single end gauge is suited for incorporation into existing gauge sets and measurement routines, serving as a reference for micrometre verification, plug gauges and comparative checks. The product details include GTIN 4054469130200 and tariff classification for inventory and customs processes, aiding traceability and procurement. For questions on fitment or compatibility with specific fixtures, Metav Werkzeuge can advise on best practices and set composition to support consistent measurement results. Contact Metav Werkzeuge today to discuss integrating this Grade 0 single end gauge into a calibration set or to request tailored advice from our specialists in Emmerich. Technical Data Article number: M319.0103.0 GTIN: 4054469130200 Norm: DIN EN ISO 3650 Nominal size: 1.03 mm Grade: 0 Material: Special steel, hardened Weight: 0.004 kg Facts Cross-section up to 10 mm: 30 x 9 mm; from 10.1 mm: 35 x 9 mm Tariff number: 90173000 Category: End gauges (Endmasse) Special features DIN EN ISO 3650 compliance Grade 0 tolerance class Hardened special steel construction Manufacturer: Metav IndustryLine FAQ What does Grade 0 mean for an end gauge? Grade 0 indicates a tight tolerance class under DIN EN ISO 3650, making the gauge suitable as a high-precision reference for inspection and calibration. Is the end gauge supplied ready for use in calibration routines? The single end gauge is produced to the standardised specification DIN EN ISO 3650 and is ready for incorporation into gauge sets; for a specific calibration certificate or services, Metav Werkzeuge can provide details and options. What material and durability can be expected? The gauge is manufactured from hardened special steel, providing wear resistance and dimensional stability for routine reference use. Can this gauge be used with micrometres and comparator setups? Yes; the nominal 1.03 mm size and standardised geometry allow reliable use as a reference in micrometre checks and comparative measurement arrangements. What is the exact article identifier for ordering? The product is listed under article number M319.0103.0 and GTIN 4054469130200 for procurement and inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.03 mm Gauge Block, Hardened Special Steel, DIN EN ISO 3650 Grade 1 - Metav IndustryLine
Consistent reference length, Grade 1 conformity and DIN EN ISO 3650 compliance provide a stable, reproducible reference for routine checks; the hardened special steel construction ensures long-term wear resistance. Order the gauge block directly via Metav Werkzeuge or consult the Metav advisors for application support. Gauge block 1.03 mm — Grade 1 (DIN EN ISO 3650), Metav IndustryLine A gauge block 1.03 mm designed as a precision length standard for calibration, comparative measurement and workshop metrology. Grade 1 accuracy to DIN EN ISO 3650 Hardened special steel construction Compact 1.03 mm nominal size Reproducible reference for routine metrology The precision of a reference standard is decisive for repeatable measurements: Grade 1 conformity to DIN EN ISO 3650 means the length is manufactured and controlled to tight tolerances, offering a trustworthy baseline for inspection tasks. As a compact 1.03 mm reference, this block reduces uncertainty when setting micrometers, dial gauges or when performing comparative checks; the clear standardisation also simplifies documentation and quality records for batch inspections. Robust material and stable geometry for daily use Manufactured from hardened special steel, the block maintains its geometry under regular handling and resists wear during wringing and stacking operations. The chosen cross-section for small sizes (30 x 9 mm) gives a stable support area that aids handling while keeping mass low (approx. 0.004 kg), so repetitive measurements remain comfortable and consistent. The material choice and finish help preserve flatness over many cycles, which translates into fewer replacements and lower operational disruption. Integration into inspection and calibration workflows This measuring standard fits naturally into shop-floor workflows and laboratory procedures where traceable reference lengths are required. The compact format supports swift comparative checks, set-up of measuring instruments and quick verification of incoming components, improving throughput without compromising accuracy. The item is listed as M319.0103.1 for stock and traceability purposes and is suitable wherever a certified baseline length is needed to support quality assurance processes. Contact Metav Werkzeuge to request the Grade 1 gauge block M319.0103.1 and secure a traceable, durable reference for calibration and inspection tasks Technical data SKU: M319.0103.1 GTIN: 4054469130217 Norm: DIN EN ISO 3650 Grade: 1 Nominal size: 1.03 mm Numbers / Core technical data Nominal size: 1.03 mm Weight: 0.004 kg Cross-section: up to 10 mm → 30 x 9 mm Tariff number: 90173000 Special features Material: Special steel, hardened Category: Endmasse (gauge block) Conformity: DIN EN ISO 3650, Grade 1 ECLASS: 21170108 FAQ What tolerance class does this gauge block meet? The block conforms to Grade 1 under DIN EN ISO 3650, providing the tolerance level expected for general workshop and laboratory reference standards. What material is used and how durable is the block? The gauge block is made from hardened special steel, offering good wear resistance and long-term stability for routine wringing and stacking operations. Can this block be used for instrument setup and comparative checks? Yes. The block is intended as a precision length reference for comparative measurement, instrument set-up and quick verification tasks within inspection workflows. What are the SKU and GTIN for ordering and inventory control? The item is listed as M319.0103.1 with GTIN 4054469130217 for stock management and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.03mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of the proven combination of ceramic construction, Grade 1 accuracy and a compact 1.03 mm nominal size for a stable reference standard in calibration and quality control. Order the gauge block directly via Metav Werkzeuge or request technical advice from their consultants. Ceramic gauge block 1.03 mm, Grade 1 DIN 861/1 — Metav IndustryLine A Ceramic gauge block 1.03 mm, Grade 1 DIN 861/1 designed as a stable, wear‑resistant length standard for calibration laboratories and precision inspection tasks Ceramic construction for thermal stability Grade 1 accuracy per DIN 861/1 Nominal size 1.03 mm for fine reference measurements Reliable reference for calibration and inspection As a compact length standard, this ceramic end gauge provides a reproducible baseline for comparative measurements and gauge block sets. The combination of a precisely finished 1.03 mm nominal size and conformity to DIN 861/1 Grade 1 supports repeatable checks of micrometres, comparators and dimensional measuring instruments. The material choice of ceramic reduces the influence of rapid temperature swings and surface corrosion compared with many metal references, so the reference remains stable during routine use. This stability translates into fewer recalibrations and more dependable in‑process verification. Material advantages that reduce measurement uncertainty The ceramic body offers low thermal conductivity and high abrasion resistance, which helps to minimise dimensional drift and surface wear over time. For laboratories that require consistent short‑range standards, this behaviour reduces one common source of measurement uncertainty and supports tighter process control. The finely lapped faces deliver a clean contact surface for datum transfer, making the block a practical choice when precise surface flatness and edge definition are required for accurate comparisons. Integration into laboratory workflows and traceable documentation Compact and lightweight, the gauge block suits frequent handling within inspection routines and can be combined in sets or used as an independent reference for instrument checks. The product is identified by SKU M324.001.03 and GTIN 4054469142401, enabling straightforward inventory management and traceability. When used as part of a documented calibration regime, the block assists in maintaining quality records and audit trails required for ISO‑aligned quality systems. For routine maintenance, simple cleaning and correct storage will preserve the measuring faces and prolong useful service life. For dependable short‑range standards, request the Metav IndustryLine ceramic gauge block via Metav Werkzeuge to secure a stable Grade 1 reference and expert application advice. Technical Data Article number: M324.001.03 GTIN: 4054469142401 Tariff number: 90173000 Facts Nominal size: 1.03 mm Weight: 0.001 kg Grade: 1 (DIN 861/1) Special features Material: Ceramic Product category: End gauge / Gauge block Manufacturer: Metav IndustryLine FAQ What level of accuracy does this ceramic gauge block offer? The ceramic gauge block M324.001.03 is specified as Grade 1 according to DIN 861/1, providing a high level of dimensional accuracy suitable for laboratory reference and calibration tasks. Is the ceramic gauge block suitable for frequent handling in a workshop environment? Yes, the ceramic construction is chosen for wear resistance and thermal stability, making the gauge block appropriate for regular use in inspection routines when handled and stored correctly. Can this gauge block be combined with metal gauge block sets? The 1.03 mm ceramic block functions as a compatible length standard for comparative measurements and may be used alongside metal gauge blocks, bearing in mind differences in material thermal behaviour during precise stack measurements. How should the gauge block be maintained to preserve accuracy? Maintain clean contact faces, avoid abrasive contamination and store the block in a dry, temperature‑stable environment to keep surface integrity and dimensional stability over time. What identification is available for inventory and traceability? The product is listed under SKU M324.001.03 and GTIN 4054469142401, facilitating catalogue listing and traceability in quality systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.04 mm Gauge Block Grade 1, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of the combination of precise Grade 1 conformity, hardened special steel construction and a compact 1.04 mm nominal size to secure reproducible reference measurements in the workshop and laboratory. Order the end gauge directly via Metav Werkzeuge or ask the consultants for application advice. End gauge 1.04 mm — Grade 1, DIN EN ISO 3650 (Metav IndustryLine) End gauge 1.04 mm is a hardened steel reference for high‑precision length verification and calibration tasks in inspection and production control Grade 1 conformity (DIN EN ISO 3650) Hardened special steel body Compact nominal size 1.04 mm Cross-section 30 x 9 mm for small sizes Reliable conformity that reduces inspection uncertainty The gauge is manufactured to DIN EN ISO 3650 and rated Grade 1, providing a stable reference point for dimensional checks. Such normative conformity streamlines acceptance testing and audit trails, because the reference aligns with recognised standards used across manufacturing and calibration labs. The 1.04 mm nominal dimension is ideal for fine verification tasks where small absolute deviations matter; the component serves as a direct physical standard when checking comparators, micrometres or measuring fixtures, helping to reduce rework and process variation. Compact form and material for consistent handling and repeatability Constructed from hardened special steel, the small-format block combines strength with low mass for practical handling. The specified cross-section of 30 x 9 mm (for nominal sizes up to 10 mm) gives sufficient stiffness while keeping the gauge easy to position in fixtures. Low weight (0.004 kg) assists fast manipulation in repetitive routines and reduces operator fatigue during frequent checks. The material choice supports stable mechanical properties across routine workshop temperatures, so repeatability of measurements is improved compared with softer references. Practical integration into calibration and quality routines The item is supplied as a traceable reference with a unique identification (SKU: M319.0104.1) and GTIN for stock and documentation purposes. As a compact end gauge it integrates readily into gauge sets and inspection benches, providing a straightforward reference for spot checks and in‑process verification. The clear specification of cross-section and standard simplifies procurement and inventory management, while compatibility with standard inspection tools makes adoption straightforward for both production and service departments. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine end gauge M319.0104.1 can be integrated into existing inspection routines and to clarify any technical details for qualification and procurement. Technical Data Article number: M319.0104.1 GTIN: 4054469130231 SKU: M319.0104.1 Facts Nominal size: 1.04 mm Weight: 0.004 kg Tariff number: 90173000 Cross-section: 30 x 9 mm (≤ 10 mm nominal size) Special features Material: special steel, hardened Standard: DIN EN ISO 3650 Grade: 1 Category: Endmasse FAQ What standard does this gauge conform to? The end gauge conforms to DIN EN ISO 3650, ensuring compatibility with common metrological requirements for gauge blocks and end measures. Which material is used for the gauge block? The M319.0104.1 end gauge is made from hardened special steel, selected for dimensional stability and wear resistance in regular inspection use. What nominal size and cross-section does the gauge have? This reference has a nominal size of 1.04 mm and a cross-section of 30 x 9 mm, the latter applying to nominal sizes up to 10 mm. Is this gauge suited for workshop and laboratory use? Yes; the Grade 1 classification and hardened construction make the gauge suitable as a reference in both workshop spot checks and laboratory calibration tasks. How is the product identified for inventory and documentation? The item is listed under SKU M319.0104.1 and GTIN 4054469130231, which simplifies stock control and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.04 mm Gauge Block Single End, Hardened Special Steel, DIN EN ISO 3650 Grade 0 - Metav IndustryLine
Take advantage of the combination of Grade 0 accuracy, a 1.04 mm nominal size and a hardened special-steel construction for a consistent reference standard in calibration routines; order this gauge block directly via Metav Werkzeuge or consult the team for integration advice. Single gauge block 1.04 mm (DIN EN ISO 3650), Grade 0 — Metav IndustryLine The single gauge block 1.04 mm serves as a compact, traceable length reference for calibration and dimensional inspection in laboratories and quality departments. Grade 0 accuracy to DIN EN ISO 3650 Hardened special steel for long life Nominal size 1.04 mm, tight tolerances Compact 30 x 9 mm cross-section Reliable reference for precision inspection As a calibration standard conforming to DIN EN ISO 3650, this gauge block provides a reproducible length reference with Grade 0 accuracy, making it suitable for tasks that require a high level of dimensional certainty. The nominal size of 1.04 mm is produced to close tolerances, so deviation margins are minimised and measurement chains remain consistent. In practical terms, this means the block can be used as a trustworthy building block for stack assemblies or as an individual reference on inspection benches, supporting repeatable verification procedures and trend monitoring in incoming or in‑process inspections. Durable construction that preserves accuracy Manufactured from hardened special steel, the block is designed for long-term stability and wear resistance under normal handling and storage conditions. The compact 30 x 9 mm cross-section (applicable for sizes up to 10 mm) combines a low mass with sufficient profile stiffness, helping to reduce susceptibility to thermal and mechanical disturbance during routine use. The nominal weight of 0.004 kg reflects the small form factor, which eases handling during short measurement sequences while still providing the necessary mass for controlled placement on measurement tables. Practical format for laboratories and workshops The geometry and finish of this single gauge block facilitate straightforward incorporation into existing measurement workflows. As a certified reference with a clearly defined standard and Grade 0 designation, it complements set-based systems and can act as a convenient replacement or supplement when a specific nominal size — 1.04 mm in this case — is required. The precision finish supports consistent contact during reference measurement tasks and reduces ambiguity when comparing results across instruments or shifts. For traceability and inventory control, the block is supplied as an individual item suitable for secure storage within a calibration cabinet or set box. For traceable precision from Metav IndustryLine, contact Metav Werkzeuge in Emmerich to confirm availability, discuss integration into existing calibration routines and request the relevant documentation Technical Data Article number: M319.0104.0 GTIN: 4054469130224 Standard: DIN EN ISO 3650 Grade: 0 Nominal size: 1.04 mm Facts Weight: 0.004 kg Cross-section: 30 x 9 mm (for sizes ≤ 10 mm) Tariff number: 90173000 Accuracy class: Grade 0 Special features Material: Hardened special steel Intended use: Length reference / calibration standard Category: Single gauge block (end measure) FAQ What accuracy class does this gauge block meet? The single gauge block meets Grade 0 accuracy according to DIN EN ISO 3650, providing a high-precision reference for inspection and calibration tasks. What is the nominal size and how precise is it? The nominal size is 1.04 mm; it is manufactured to the tight tolerances associated with Grade 0 blocks under DIN EN ISO 3650. What material is used and how does that affect longevity? The block is made from hardened special steel, which offers good wear resistance and dimensional stability for repeated use as a calibration reference. Can this block be used individually or only in sets? The unit is supplied as a single gauge block (Article number M319.0104.0) and is suitable both for individual use as a reference and for combination with other blocks in stack configurations. How should the gauge block be handled and stored? Handle the block carefully to avoid scratches and contamination; store it in a protective case or cabinet to preserve the calibrated surface and ensure long-term dimensional stability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.04mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of Grade 1 accuracy (DIN 861/1) and the ceramic construction to secure a stable, fine‑scale reference of 1.04 mm for calibration and setting tasks; order directly via Metav Werkzeuge or consult their specialists for application advice and reliable supply from Emmerich. Ceramic gauge block 1.04 mm, Grade 1 (DIN 861/1) — Metav IndustryLine The Ceramic gauge block 1.04 mm, Grade 1 (DIN 861/1) serves as a compact precision reference for inspection benches and tool presetting, providing a defined nominal length in a non‑ferrous, dimensionally consistent form Ceramic material for stable reference values Grade 1 tolerance according to DIN 861/1 Nominal size 1.04 mm for fine calibration Lightweight 0.001 kg for easy handling Reliable reference quality that supports accurate processes This gauge block delivers Grade 1 conformity to DIN 861/1, which translates into a narrowly defined tolerance band and reproducible measurement results. As a calibrated length standard in the sub‑millimetre range, the component functions as a reference for setting gauges, verifying small‑part dimensions and checking the resolution of inspection instruments. The clear specification of 1.04 mm as nominal size simplifies procurement and documentation, enabling straightforward integration into quality procedures and process sheets. Ceramic construction for consistent performance and handling Made from ceramic, the block offers a stable substrate that resists rapid wear and supports repeatable contact measurements. Its very low mass (approx. 0.001 kg) eases handling when working with delicate stacks or demanding micro‑adjustments, while the non‑metallic base reduces magnetic interaction where that is a concern. The compact format and material choice provide a balance between durability and minimal thermal inertia, helping to maintain dimensional integrity during short‑term handling and routine checks. Traceable reference, clear logistics and workshop fit The article is listed with GTIN 4054469142418 and tariff number 90173000 for seamless procurement and inventory control. Classified under precision end measures, the component fits bench and laboratory environments where fine calibration is required. As part of the Metav IndustryLine range, the block benefits from Metav’s position as a European quality filter and logistics hub in Emmerich, which supports dependable delivery and product consistency for industrial users and specialist dealers. For tailored advice on using this Metav IndustryLine gauge block in measurement chains or to arrange purchase and delivery through Metav Werkzeuge, contact Metav Werkzeuge for expert guidance and reliable supply from Emmerich Technical Data Article number: M324.001.04 GTIN: 4054469142418 Tariff number: 90173000 Facts Nominal size: 1.04 mm Weight: 0.001 kg Grade: 1 (DIN 861/1) Special features Material: Ceramic Category: Gauge block (end measure) Brand: Metav IndustryLine FAQ What tolerance class does this gauge block meet? The block complies with Grade 1 tolerance as specified by DIN 861/1, ensuring a narrow tolerance range suitable for fine calibration tasks. What is the nominal size of the reference? The nominal length is 1.04 mm, provided as a fixed reference for small‑scale checks and gauge setting. Which material is used for the block and what does that imply? The block is made of ceramic; this provides a wear‑resistant, dimensionally consistent reference with low mass for careful handling. Is this component intended for workshop or laboratory use? This End measure is suitable for both bench‑level workshop checks and laboratory calibration where a compact, precise reference length is required. How can the item be identified for procurement? Use article number M324.001.04 or GTIN 4054469142418 for order entries and inventory records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.05 mm Gauge Block, Hardened Special Steel, DIN EN ISO 3650 Grade 0 - Metav IndustryLine
Take advantage of a compact, standards‑compliant reference that combines DIN EN ISO 3650 Grade 0 accuracy with hardened special steel durability for reproducible workshop measurements; order via Metav Werkzeuge or consult the team for selection and supply. Gauge block 1.05 mm (DIN EN ISO 3650, Grade 0) — Single end measure in hardened special steel A single gauge block 1.05 mm designed as a high‑precision reference for calibration tasks and comparative checks in metrology and quality control. DIN EN ISO 3650 Grade 0 accuracy Hardened special steel construction Nominal size 1.05 mm for reference work Precision‑ground faces for reliable wringing Consistent reference accuracy for routine checks The single end measure conforms to DIN EN ISO 3650 and is manufactured to Grade 0, providing a stable reference for comparative measurements and gauge‑block stacks. With a nominal size of 1.05 mm, this compact reference is suitable for tight tolerance checks and small‑part inspection, delivering a measurable improvement in repeatability. The standardised tolerance class ensures compatibility with existing blocks and calibration benches, so traceable comparisons and periodic control remain straightforward and efficient. Long‑lasting construction and predictable handling Manufactured from hardened special steel, the block resists wear during everyday use while preserving the finish required for dependable wringing and stack formation. The compact profile (cross‑section options: up to 10 mm — 30 x 9 mm; from 10.1 mm — 35 x 9 mm) and very low mass (0.004 kg) make the item easy to handle and simple to integrate into inspection sequences without disturbing delicate assemblies. The precision‑ground working faces reduce the risk of measurement variability caused by surface defects and support consistent contact forces when assembling reference stacks. Practical benefits for workshop and inspection environments As a single, certified reference piece the block supports fast comparative tests, in‑process checks and the construction of bespoke gauge stacks for bespoke measuring tasks. The compact design contributes to a tidy toolset and minimises handling time, while the conformity to the international standard enables interchangeability in multi‑supplier environments. For procurement planners and quality engineers the result is a reduction in measurement uncertainty during routine checks and a clear, standards‑based basis for audit documentation. For Grade 0 reference standards from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for expert advice and rapid supply — Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich; +49 2822 7131930; info@metav-werkzeuge.com Technical Data Article number: M319.0105.0 GTIN: 4054469130248 Manufacturer: Metav IndustryLine Facts Nominal size: 1.05 mm Tolerance class: Grade 0 (DIN EN ISO 3650) Weight: 0.004 kg Cross‑section: up to 10 mm — 30 x 9 mm; from 10.1 mm — 35 x 9 mm Tariff number: 90173000 Special features Material: hardened special steel Precision‑ground working faces Category: Gauge blocks Suitable for stack formation and reference measurements FAQ What accuracy does this gauge block provide? The gauge block 1.05 mm meets DIN EN ISO 3650 Grade 0, providing the precision and tolerance class expected for high‑quality reference measurements. Which material is used for the block and what does that mean for wear? Made from hardened special steel, the block offers enhanced surface hardness and wear resistance, maintaining the finish required for reliable wringing and long‑term use. Can this unit be used in gauge‑block stacks and calibration setups? Yes — the single end measure is suitable for stack formation and comparative calibration tasks; see SKU M319.0105.0 from Metav IndustryLine for compatibility with standard sets. What are the block's dimensions and mass? Nominal size is 1.05 mm; cross‑section is 30 x 9 mm up to 10 mm nominal size and 35 x 9 mm from 10.1 mm; mass is 0.004 kg. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
ensure traceable length calibration with gauge blocks
gauge blocks, also called slip gauges or end gauges, are precision length standards designed to transfer exact measures during calibration and setup. Manufactured and graded for metrological use, they provide the reference dimensions needed to verify and adjust measuring instruments in industrial workshops and calibration labs.
how gauge blocks work and where they are essential
gauge blocks are used to create known lengths by wringing individual blocks together or by using a single block as a reference. length calibration in industry commonly relies on parallel gauge blocks, while angle, cylinder and sphere end gauges serve specialised tasks. these blocks are produced in steel, ceramic or carbide, and their material choice balances wear resistance with thermal behaviour. regular calibration—typically performed annually—by DAkkS-accredited laboratories ensures traceability. the highest-precision reference work, class K, is certified by the PTB using laser techniques; classes 0, 1 and 2 are tested under progressively less controlled conditions (class 0 in a climate-controlled lab, class 1 in a standard measurement room, class 2 in production).
measurable benefits that cut downtime and uncertainty
- consistent, traceable length standards reduce rework and measurement disputes by enabling reliable instrument calibration.
- choosing the correct material (steel, ceramic, carbide) extends service life and limits wear in high-use environments.
- selecting the right accuracy class (K, 0, 1 or 2) matches calibration effort to application needs and avoids over‑specification.
- annual calibration by accredited labs maintains documented compliance and supports quality systems such as ISO.
why Metav is a smart partner for precision standards
Metav combines specialist knowledge with a broad range of measurement technology, making the procurement of gauge blocks straightforward and dependable. with over 48,000 customers and more than 250,000 products stocked from Emmerich, Metav acts as a pragmatic quality filter for European workshops, reducing supplier complexity and ensuring consistent supply.
In short, gauge blocks deliver traceable, material‑appropriate and class‑matched references that keep calibration workflows efficient and auditable.
faq
what materials are gauge blocks available in and why does it matter?
gauge blocks are typically supplied in steel, ceramic or carbide. material choice affects wear resistance, stability and thermal expansion; selecting the right material for your environment optimises longevity and measurement stability.
how often should gauge blocks be calibrated?
industry practice is an annual calibration cycle, carried out by DAkkS-accredited laboratories, though frequency can be increased depending on usage and required uncertainty.
what do the accuracy classes k, 0, 1 and 2 indicate?
the classes denote graded tolerances and test conditions: K is the highest precision (certified by PTB with laser measurement), class 0 is checked under climate-controlled lab conditions, class 1 in a normal measurement room and class 2 in production environments.
are parallel gauge blocks always used for length calibration?
yes; for length calibration the parallel gauge blocks are the primary standard because they provide exact planar faces for wringing and stacking to create precise lengths.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com