End gauges for precise length calibration
End gauges provide exact reference lengths for calibrating measurement instruments and ensuring consistent dimensional accuracy in metalworking and inspection processes. Used in production and laboratory settings, these end gauges—made from steel, ceramic or carbide—allow technicians to compensate for wear and thermal effects and maintain measurement traceability, especially when employed alongside parallel end gauges, cylinder gauges and calibration masters. Classes 0, 1 and 2 define practical tolerance levels for workshop, inspection-room and production use respectively, delivering the repeatable precision required for machining and quality control.
1.13 mm Gauge Block Single End, Hardened Special Steel, DIN EN ISO 3650 Grade 0 - Metav IndustryLine
Take advantage of the combination of Grade 0 accuracy, DIN EN ISO 3650 conformity and hardened special-steel construction for a reliable length standard in precision workflows; order the block directly via Metav Werkzeuge or consult our specialists for procurement advice. Single gauge block 1.13 mm — Grade 0, DIN EN ISO 3650 (Metav IndustryLine) Single gauge block 1.13 mm, DIN EN ISO 3650, Grade 0 offers a compact, traceable length reference for calibration and high-precision workshop tasks Grade 0 accuracy to DIN EN ISO 3650 Hardened special steel construction Compact cross-section 30 x 9 mm for stability Precise nominal length 1.13 mm Dependable reference for high-precision measurement A Grade 0 gauge block manufactured to DIN EN ISO 3650 provides a trusted length standard where reproducibility matters. The nominal 1.13 mm dimension is held to the tolerance class defined by the standard, which ensures the block serves as a verifiable reference in calibration tasks and comparative checks. This level of conformity supports objective measurement procedures and reduces uncertainty in inspection routines, making the block suitable for use as a master standard in workshops and inspection stations. Robust design that supports repeatable handling Construction in hardened special steel gives the block mechanical stability and wear resistance for frequent stacking and use. The compact 30 x 9 mm cross-section (applies to nominal sizes up to 10 mm) balances stiffness with easy handling, so the block resists twist during clamping or assembly. As a small-format reference, it integrates into test benches and gauge sets without adding bulk, while the hardened material helps maintain surface integrity that is essential for repeatable contact measurements. Integration into measurement chains and procurement As a single-element length standard, the block is designed for stacking with other precision blocks and for use in setting gauges or checking micrometers. Clear identification via SKU and GTIN supports inventory control and reordering in production and quality management systems. For procurement and technical alignment, Metav’s position as a precision partner ensures consistent supply and documentation for your workshop’s reference standards. Contact Metav Werkzeuge to discuss specification matching or to secure this Grade 0 gauge block for immediate dispatch from Emmerich. Technical data Article number: M319.0113.0 GTIN: 4054469130408 Standard: DIN EN ISO 3650 Grade: 0 Nominal size: 1.13 mm Material: Special steel, hardened Weight: 0.004 kg Tariff number: 90173000 Specifications Cross-section (nominal ≤ 10 mm): 30 x 9 mm Nominal length: 1.13 mm Weight: 0.004 kg Features Category: Gauge blocks / End measures Compliance: DIN EN ISO 3650 (Grade 0) Material property: hardened special steel Application context: precision length reference for calibration and inspection FAQ What accuracy class does this gauge block meet? The single gauge block meets Grade 0 tolerance requirements according to DIN EN ISO 3650, providing a high-precision reference for comparative measurements. What material is used and why is it suitable? The block is made of hardened special steel, chosen for mechanical stability and wear resistance, which preserves the contact surfaces required for repeatable measurements. Can the block be used together with other gauge blocks? Yes, this single block is intended for stacking with other gauge blocks and for use as a master in setting instruments such as micrometers and comparators. What are the procurement identifiers for this item? The product is supplied as SKU M319.0113.0 with GTIN 4054469130408 to assist with ordering and inventory management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.13mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Combine the thermal stability of ceramic, DIN 861/1 Grade 1 accuracy and a compact 1.13 mm nominal size to create a reproducible reference for fine dimensional checks; order the part directly via Metav Werkzeuge or consult our specialists for application advice. Ceramic gauge block 1.13 mm – Grade 1 (DIN 861/1) by Metav IndustryLine The Ceramic gauge block 1.13 mm, Grade 1 (DIN 861/1) serves as a stable, wear‑resistant reference for precision measurement and calibration in metrology laboratories and quality control workshops. Grade 1 accuracy to DIN 861/1 Ceramic substrate with high thermal stability Nominal size 1.13 mm for fine reference tasks Compact, low‑mass geometry for minimal contact wear Reproducible reference for high‑precision checks As a compact reference element, this ceramic end measure delivers consistent dimensional benchmarks for small‑scale inspections and instrument comparisons. The combination of a defined nominal size (1.13 mm) and the Grade 1 tolerance class according to DIN 861/1 provides a clear, measurable basis for verification procedures. In calibration routines or incoming inspection, the block functions as a dependable standard against which micrometres, callipers and comparison instruments can be cross‑checked, reducing ambiguity in pass/fail decisions and supporting process stability. Why ceramic improves measurement repeatability Ceramic as a base material offers distinct metrological advantages: low thermal expansion, high hardness and chemical inertness. These properties reduce dimensional drift with ambient temperature changes and limit surface wear during repeated contact measurements, helping to preserve the reference dimension over time. The use of a ceramic substrate therefore enhances repeatability and extends service life compared with many metallic reference pieces, particularly when fine nominal sizes and tight tolerances are required. Practical handling and integration into workflows The small format and light mass make the block straightforward to handle during routine checks and portable inspections. Its compact size is particularly suitable for bench‑top metrology tasks or for setting small gap‑gauges and fixtures. Where fine manual contact is required, the reduced mass minimises mechanical loading on the measuring instrument and limits operator‑induced deviation. For traceable measurement chains, the end measure can be incorporated into daily checklists or comparator setups to verify instrument performance quickly and efficiently. Compatibility and application scenarios This end measure is intended for precision inspection work and component verification where sub‑millimetre reference standards are required. Typical applications include calibration laboratories, toolrooms, watchmaking and components that demand exact micro‑gapping. The ceramic construction is beneficial where dimensional stability under varying workshop temperatures is a priority. For documentation and procurement, the item is supplied as a labelled gauge block with the manufacturer’s identification and SKU for straightforward inventory management. For Metav IndustryLine precision standards and rapid supply from Emmerich, contact Metav Werkzeuge directly for specialist guidance and dependable delivery to support workshop or laboratory quality assurance. Technical data SKU: M324.001.13 GTIN: 4054469142500 Tariff number: 90173000 Category: End gauge (Endmasse) Material: Ceramic Nominal size: 1.13 mm Weight: 0.001 kg Grade: 1 (DIN 861/1) Numeric specifications Nominal dimension: 1.13 mm Mass: 0.001 kg Classification: Grade 1 GTIN numeric: 4054469142500 Materials & special features Material: Ceramic Compact geometry for small‑scale references High dimensional stability Designed for precision inspection tasks FAQ What level of accuracy does Grade 1 indicate? Grade 1 (DIN 861/1) designates a tight tolerance class suitable for high‑precision reference tasks; the ceramic gauge block adheres to this standard to ensure consistent measurement comparators. Can the ceramic gauge block be used with micrometres and callipers? Yes. The ceramic end measure provides a stable reference for cross‑checking micrometres, callipers and other dimensional instruments in routine inspection and comparator procedures. Is the ceramic material suitable for repeated contact measurements? The ceramic construction combines high hardness with low thermal expansion, making it appropriate for repeated contact use while resisting rapid surface wear compared with some softer materials. How should the gauge block be stored between uses? Store the block in a clean, dry environment, protected from abrasion and contaminants; use a labelled tray or protective pouch to maintain the reference surface and minimise handling marks. Does the product include an identifying SKU for inventory control? Yes. The item is listed as SKU M324.001.13 for straightforward ordering and stock management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.14 mm Gauge Block Single End, Grade 0, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Reliable Grade 0 conformity and a hardened special steel construction provide a stable reference for precision checks; combined with the compact 1.14 mm nominal size this single gauge block keeps calibration routines efficient and reproducible. Order the single gauge block directly via Metav Werkzeuge or ask our consultants for set options. Single gauge block 1.14 mm (DIN EN ISO 3650, Grade 0) — Metav IndustryLine The single gauge block 1.14 mm is a Grade 0 precision reference designed for dimensional calibration and comparative measurement tasks in toolrooms, inspection labs and specialised workshop metrology. DIN EN ISO 3650 Grade 0 accuracy Hardened special steel construction Compact, stable 1.14 mm nominal size Cross-section 30 x 9 mm for secure clamping Consistent reference accuracy that reduces rework A Grade 0, DIN EN ISO 3650-compliant gauge block delivers a reliably small tolerance band for comparative measurements, which reduces the need for repeat inspections and rework. The Grade 0 specification defines tight flatness and length tolerances, so the block serves as a dependable reference in calibration chains. Using a certified reference standard shortens setup times and improves traceability across batch inspections, leading to measurable process benefits in production and quality assurance. Robust material and stable contact surfaces Constructed from hardened special steel, this gauge block offers long-term dimensional stability and resistance to wear under normal handling. The hardened substrate preserves the flat, highly polished faces required for accurate wringing and repeatable contact with mating gauges or measuring instruments. The robust surface finish supports reproducible readings and minimises the impact of surface contamination, which helps maintain measurement quality between scheduled maintenance intervals. Practical handling and integration into inspection routines The compact nominal size and the specified cross-section (up to 10 mm: 30 x 9 mm) make the block easy to seat in comparison fixtures and gauge holders. Its weight and proportions favour quick placement and secure clamping during setting operations, while the geometry supports stable alignment in small jigging arrangements. The design thus integrates smoothly into everyday workshop workflows, enabling faster set‑up for tool presetting and routine dimensional checks. Compatibility, set planning and documentation Manufactured to the DIN EN ISO 3650 standard and offered under the Metav IndustryLine, this single block suits modular gauge sets and reference stacks used in calibration laboratories and inspection benches. The nominal 1.14 mm size complements common measurement chains and can be combined with other block sizes to build precise nominal lengths. Where traceability and documentation are required, relevant order references — including the SKU M319.0114.0 and GTIN — can be used for inventory, labelling and quality records. Contact Metav Werkzeuge for tailored set options and delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: M319.0114.0 GTIN: 4054469130422 Nominal size: 1.14 mm Standard: DIN EN ISO 3650 Grade: 0 Facts Weight: 0.004 kg Cross-section: up to 10 mm — 30 x 9 mm Tariff number: 90173000 Special features Material: hardened special steel Category: Gauge blocks (Endmasse) Brand: Metav IndustryLine FAQ What tolerance class does this gauge block meet? The single gauge block 1.14 mm conforms to DIN EN ISO 3650 Grade 0, providing the tight tolerance and flatness expected for high‑precision reference standards (SKU M319.0114.0). Is the material suitable for frequent laboratory use? Yes, the block is made from hardened special steel, which ensures wear resistance and longevity under regular handling and routine wringing in laboratory or workshop environments. Can this gauge block be combined into sets for custom lengths? The block is compatible with standard gauge block practices and can be combined with other sizes to create precise nominal lengths; the Metav IndustryLine reference (M319.0114.0) simplifies set planning. How should the block be cleaned and stored to preserve accuracy? Wipe surfaces with a lint‑free cloth and a suitable cleaning fluid, keep the block in a dry, temperature‑stable case and avoid abrasive contact; following these steps will help maintain the dimensional stability of the 1.14 mm reference. Is the block suitable for calibration laboratories and shop floors? Designed to DIN EN ISO 3650 Grade 0, the single gauge block 1.14 mm meets the needs of calibration laboratories and precision shop‑floor applications where a compact, high‑accuracy reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.14 mm Gauge Block, Grade 1, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of a traceable reference standard that combines DIN EN ISO 3650 conformity, Grade 1 accuracy and a wear‑resistant hardened steel construction to secure repeatable measurements in quality control and production settings. Order the gauge block directly via Metav Werkzeuge or consult our specialists for application advice. End gauge 1.14 mm — Grade 1 gauge block with DIN EN ISO 3650 compliance The End gauge 1.14 mm provides a compact, hardened reference for precise length standards in inspection benches and calibration routines. Gauge block 1.14 mm according to DIN EN ISO 3650 Grade 1 tolerance for stable reference Hardened special steel for wear resistance Compact 30 x 9 mm cross-section, lightweight Reference accuracy for in‑line and laboratory measurement systems This gauge block serves as a reliable length standard where repeatability matters. Manufactured to DIN EN ISO 3650, the Grade 1 specification ensures that the nominal 1.14 mm value meets strict tolerance bands suitable for workshop calibration and component inspection. The hardened special steel body minimises wear during regular use, which preserves the reference surface and reduces drift over time. For users integrating routine checks into production, the block delivers a measurable baseline that supports consistent quality decisions. Small footprint, robust handling and easy storage With a cross‑section of 30 x 9 mm for nominal sizes up to 10 mm, this end gauge combines a small footprint with stable handling on the bench. The low mass (0.005 kg) makes it straightforward to position and stack when assembling sets, while the rectangular profile provides secure clamping in holders or vises. The compact geometry reduces moment‑induced deflection during placement, so the reference dimension remains reproducible even in frequent manual checks. Clear identification via SKU: M319.0114.1 and GTIN: 4054469130439 supports inventory management and traceability. Compliance, traceability and workshop integration Conformity to DIN EN ISO 3650 simplifies documentation for audits and supports integration into existing quality systems. The hardened material and precise ground faces mean the block is fit for routine calibration loops and reference comparisons. Supplied as a single precision end gauge, it complements measurement equipment on inspection benches and can be used alongside micrometres and gauge block sets to verify instruments. The clear numeric identification and tariff coding facilitate logistics and regulatory reporting in industrial environments. For gauge blocks from Metav IndustryLine and tailored advice on using a 1.14 mm reference in production or inspection, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our team will assist with selection and application guidance Technical Data SKU: M319.0114.1 GTIN: 4054469130439 Nominal size: 1.14 mm Standard: DIN EN ISO 3650 Grade: 1 Numbers Weight: 0.005 kg Cross-section (≤10 mm): 30 x 9 mm Cross-section (>10.1 mm): 35 x 9 mm Tariff number: 90173000 Special features Material: hardened special steel Category: Gauge block / end gauge Compact profile for stable handling Suitable for workshop reference and inspection FAQ What tolerance class does this gauge block meet? The gauge block complies with Grade 1 tolerances under DIN EN ISO 3650, delivering the appropriate accuracy for workshop calibration and inspection tasks. Is the material durable for frequent use? Yes. The block is made from hardened special steel, which provides high wear resistance and preserves the reference faces during repetitive checks. Can this gauge block be used for instrument calibration? This end gauge is suitable as a reference standard for routine instrument verification and comparative calibration in production and inspection environments. How is the product identified for ordering and inventory? Identification is via SKU: M319.0114.1 and GTIN: 4054469130439, which support procurement, stock control and traceability. For which applications is a 1.14 mm gauge block recommended? The 1.14 mm size is ideal for fine dimensional checks, set‑up controls and comparative measurements where a compact, high‑accuracy reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.14mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of the ceramic material and Grade 1 tolerance to secure a stable, wear‑resistant reference for fine length checks; the 1.14 mm nominal length suits precise calibration tasks. Order the Ceramic gauge block 1.14 mm, Grade 1 DIN 861/1 directly via Metav Werkzeuge or ask our consultants if needed Ceramic gauge block 1.14 mm, Grade 1 DIN 861/1 — Metav IndustryLine reference standard The Ceramic gauge block 1.14 mm, Grade 1 DIN 861/1 is a compact, high‑precision reference used for dimensional verification and calibration in metrology labs and inspection benches High thermal stability ceramic Grade 1 accuracy to DIN 861/1 Nominal length 1.14 mm for precision checks A dependable reference for high‑precision measurement results As a compact gauge block manufactured in ceramic, this reference element provides reproducible contact geometry and dimensional stability under normal workshop conditions. The Grade 1 classification to DIN 861/1 signals a manufacturing tolerance level intended for routine laboratory calibration and quality control tasks; this makes the block a practical choice where consistent, verifiable measurements are required. The small 1.14 mm nominal length is particularly useful for setting master stacks, checking feeler gauges or verifying small tool offsets, delivering a precise basis for comparative measurements and process validation. Material benefits that support accuracy and longevity Ceramic construction combines thermal stability with excellent wear resistance, reducing drift caused by temperature variation and contact abrasion during repeated use. Compared with some metallic gauges, the ceramic block is less prone to magnetic interference and chemical corrosion, which extends service life and preserves the original gauge dimensions. These material properties translate into fewer regrinds and longer intervals between reference recalibrations, enhancing throughput in calibration labs and saving operational effort without compromising metrological integrity. Practical integration into inspection workflows The compact format and nominal dimension make the block straightforward to handle and to incorporate into master stacks or comparator setups. As a physical reference, it supports traceable checks of callipers, micrometers and small measuring instruments where sub‑millimetre precision is required. Clear labelling and robust geometry enable fast identification and repeatable seating on flat reference surfaces, which helps to reduce operator‑related variation and speeds up routine test cycles — an efficiency gain that benefits small workshops and industrial inspection teams alike. Secure the Metav IndustryLine ceramic gauge block with Grade 1 accuracy from Metav Werkzeuge for reliable integration into quality control routines and expert advice on application and availability Technical data Article number: M324.001.14 GTIN: 4054469142517 Material: Ceramic Nominal length: 1.14 mm Grade: 1 (DIN 861/1) Weight: 0.001 kg Customs tariff number: 90173000 Category: End gauges / Gauge blocks Facts Nominal dimension: 1.14 mm Grade designation: 1 Weight metric: 0.001 kg Special features Compact, short gauge for fine calibration Non‑magnetic ceramic material Suitable as reference for comparators and master stacks FAQ What is the intended use of this ceramic gauge block? The Ceramic gauge block 1.14 mm, Grade 1 DIN 861/1 from Metav IndustryLine serves as a precision reference for short‑range dimensional checks, calibration of small measuring instruments and master‑stack construction in metrology and quality departments. Is this gauge block resistant to corrosion and magnetic effects? Yes, the ceramic composition of the block provides resistance to corrosion and avoids magnetic interference, supporting stable measurements in a range of workshop environments. Can this gauge block be used to calibrate callipers and micrometers? The block is well suited for verifying the zero and small‑offset behaviour of callipers and micrometers; its 1.14 mm nominal size is convenient for checks that require sub‑millimetre references. How should the ceramic gauge block be stored and handled? Handle the block with care, avoid hard shocks and keep it on clean, flat surfaces or in a protective case when not in use to preserve the reference faces and dimensional integrity. Does the product include a certificate or traceability information? Product documentation and calibration status depend on the selected purchasing option; consult Metav Werkzeuge for details on supplied certificates and traceability for the M324.001.14 gauge block. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.15 mm Gauge Block Grade 1, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of DIN EN ISO 3650 conformity and a hardened special steel construction to secure reliable dimensional reference in inspection and setup tasks; the compact 1.15 mm nominal size ensures effortless handling and repeatable contact points. Order the gauge block directly via Metav Werkzeuge or ask our consultants if needed. Gauge block 1.15 mm, Grade 1 — hardened special steel, DIN EN ISO 3650 The Gauge block 1.15 mm, Grade 1 is a precision steel reference for laboratory calibration and workshop dimensional checks, manufactured to DIN EN ISO 3650 for consistent interchangeability and long-term service DIN EN ISO 3650 Grade 1 accuracy Hardened special steel construction Compact 1.15 mm nominal size Precision ground cross-section 30x9 mm Consistent accuracy where it matters most This gauge block is produced to DIN EN ISO 3650 and specified as Grade 1, making it suitable as a stable reference in quality control and inspection workflows. The nominal dimension of 1.15 mm is ground to a repeatable finish, providing a trustworthy standard for checking micrometres, comparators and manual measurement operations. The hardened special steel body reduces wear during repeated wringing and handling while maintaining dimensional integrity over time, which translates into fewer re-measurements and higher process reliability. Ergonomic form and reliable handling for fast workflows A narrow profile and defined cross-section ensure simple positioning and secure wringing in gauge stacks or single‑piece checks. For nominal sizes up to 10 mm the cross‑section is 30 x 9 mm, a format chosen to balance stiffness and manoeuvrability while keeping the mass low (approx. 0.005 kg), so handling is convenient even in busy shop-floor routines. Precision‑ground faces give consistent contact conditions, supporting reproducible results with each use and easing integration into existing gauge sets and inspection rigs. Identification, traceability and workshop integration Clear identifiers and standard compliance simplify stock management and traceability when the block is added to inspection equipment or calibration trays. The robust material and production process support long service intervals and predictable maintenance cycles, which helps to maintain uptime in production and inspection. Purchasing via a dedicated supplier like Metav IndustryLine aligns the acquisition with a European quality filter and dependable logistics, supporting repeat orders and centralised tool management for workshops and laboratories. For a precision reference that supports reproducible measurement workflows, contact Metav Werkzeuge in Emmerich for advice and supply of the Metav IndustryLine gauge block 1.15 mm, Grade 1. Technical data Article number: M319.0115.1 GTIN: 4054469130453 Category: Endmasse / Gauge blocks Tariff number: 90173000 Facts Nominal size: 1.15 mm Weight: 0.005 kg Cross-section (≤10 mm): 30 x 9 mm Special features Material: hardened special steel Standard: DIN EN ISO 3650 Grade: 1 Manufacturer: Metav IndustryLine FAQ What standard and grade does this gauge block comply with? The gauge block conforms to DIN EN ISO 3650 and is supplied as Grade 1, making it suitable for workshop and laboratory reference use. What material is used for the gauge block and how durable is it? Constructed from hardened special steel, the block offers enhanced wear resistance and stable dimensions during routine wringing and inspection. Can the block be integrated into existing gauge sets or stacks? Yes, the 1.15 mm nominal size and the precision ground faces allow reliable wringing and stacking with other gauge blocks in sets. How should the gauge block be cared for to preserve accuracy? Keep the block clean and dry, avoid contact with aggressive chemicals, and apply a thin corrosion-preventive oil when storing for extended periods to protect the hardened surfaces. Is the product identified for inventory and traceability? Identification is provided via the article number M319.0115.1 and GTIN 4054469130453, facilitating integration into inventory and calibration records. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.15mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of a ceramic reference that combines exceptional dimensional stability and Grade 1 accuracy to speed up inspection cycles and reduce rework. The compact 1.15 mm nominal length provides a stable reference for micro‑measurements; order via Metav Werkzeuge or consult their specialists for application advice. Ceramic Gauge Block 1.15 mm, Grade 1 (DIN 861/1) — Metav IndustryLine precision reference The Ceramic Gauge Block 1.15 mm, Grade 1 (DIN 861/1) serves as a stable length standard for calibration tasks and fine metrology in inspection, laboratory and precision workshop settings Ceramic construction for thermal stability Grade 1 accuracy to DIN 861/1 Nominal length 1.15 mm for micro measurements High hardness and wear resistance for long service life Consistent accuracy for reliable measurement chains A ceramic gauge block functions as a primary length reference in many inspection routines. The 1.15 mm nominal dimension, paired with Grade 1 tolerances to DIN 861/1, establishes a reproducible baseline that reduces measurement uncertainty and speeds decision making on the shop floor. Ceramic material gives the block a low thermal coefficient, so ambient temperature changes induce smaller length shifts compared with some metals; this improves repeatability during short inspection runs. Using such a reference in a calibrated set-up helps to cut down on corrective work and supports efficient quality workflows. Material advantages and practical handling Ceramic is chosen for its hardness, chemical inertness and resistance to corrosion; these properties translate into wear resistance and long intervals between maintenance. The smooth faces of the block support reliable wringing to other gauge elements and to measuring anvils, enabling quick stack-ups and comparative checks. Care is straightforward: avoid hard impacts and keep mating faces clean to preserve accuracy. When stored properly, ceramic references retain their dimensional integrity over extended periods, offering a low‑maintenance option for busy metrology labs and specialised workshops. Where this reference proves most valuable Such a compact reference is particularly useful for fine mechanical work, micro‑manufacturing, optical component inspection and precision toolmakers who require a short, stable benchmark for calibration tasks. The block integrates well into routine checks, comparative measurement procedures and as an artefact in optical or tactile measuring machines. Its small mass and compact form factor make it simple to handle during quick verification tasks while still providing the metrological confidence expected in laboratory and production environments. For traceable precision and practical advice on choosing the right reference, contact Metav Werkzeuge — Metav IndustryLine specialists are available for technical clarification and ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M324.001.15 GTIN: 4054469142524 SKU: M324.001.15 Facts Nominal length: 1.15 mm Material: Ceramic Grade: 1 (DIN 861/1) Weight: 0.001 kg Tariff number: 90173000 Special features Category: End measures (Endmasse) Compact geometry for micro measurements Corrosion‑resistant and wear‑resistant faces Suitable for wringing and stack measurements FAQ What material is the block made from and why is that important? The Ceramic Gauge Block 1.15 mm, Grade 1 (DIN 861/1) is made from ceramic; this provides a low thermal coefficient and high wear resistance, which improves short‑term stability and reduces maintenance compared with some metal references. Does this gauge block meet a recognised tolerance standard? Yes, the block is specified to Grade 1 tolerances in accordance with DIN 861/1, making it suitable as a reliable reference for many precision inspection tasks. Is a calibration certificate supplied with the block? The Ceramic Gauge Block 1.15 mm, Grade 1 (DIN 861/1) is supplied as specified; a calibration certificate is not automatically included unless explicitly ordered or stated in the product offer. Can the block be used for wringing and building gauge stacks? The smooth, hard faces of this ceramic reference are suitable for wringing and assembling into stacks for comparative measurements and quick in‑house checks. What typical applications suit such a small nominal length? Applications include micro‑mechanical inspection, optical part verification, toolmaker checks and any situation where a short, stable length standard reduces set‑up time and improves repeatability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.15mm End Gauge Single Piece Grade 0 DIN EN ISO 3650 Hardened Special Steel - Metav IndustryLine
Take advantage of a Grade 0 reference that adheres to DIN EN ISO 3650 and is made from hardened special steel to ensure stable dimensional checks and consistent repeatability; order the gauge directly via Metav Werkzeuge or consult our technical team for integration into calibration routines. Single End Gauge 1.15 mm (DIN EN ISO 3650), Grade 0 — Metav IndustryLine The Single End Gauge 1.15 mm (DIN EN ISO 3650) serves as a compact dimensional reference for inspection benches and calibration tasks where a reliable, standardised length is required. DIN EN ISO 3650 certification Grade 0 tolerance for consistent accuracy Hardened special steel construction Compact cross-section 30×9 mm for space-saving use Consistent metrology with certified tolerances This reference is manufactured to DIN EN ISO 3650, providing a normative basis for length verification in both production and inspection environments. The Grade 0 tolerance class signals that this standard meets tight manufacturing limits intended for accurate comparative checks and instrument verification. As a 1.15 mm nominal-size reference, the component is suited for precise calibration tasks where small, repeatable lengths are required. Emphasising traceability and conformity, the gauge is produced as a stable reference standard that reduces uncertainty during routine checks of gauges, pins and small-field measuring instruments. Robust construction for repetitive handling Made from hardened special steel, the gauge resists wear and maintains its dimensional integrity under regular use. The compact cross-section (30×9 mm for sizes up to 10 mm) combines rigidity with manageable handling, so repetitive placements and seating do not easily deform the reference. The light mass (approximately 0.005 kg) supports safe manual handling without compromising stability during seating on flat surfaces. These material and geometric choices translate into longer service life and fewer replacement cycles, improving the overall cost-efficiency of a calibration programme. Practical use and simple integration into workflows The gauge is a practical addition to inspection benches and calibration kits, acting as a quick verification tool for micrometers, callipers and complementary reference blocks. Its nominal dimension is easy to interpret and use as a comparative reference in both workshop and laboratory settings. Even where users have limited metrology experience, the normative designation (DIN EN ISO 3650) and Grade 0 label make specification and conformity checks straightforward: select the gauge as the known reference and document any deviation found on the instrument under test. This simplification helps maintain quality control without complex procedures. Reliability and procurement assurance Sourcing this reference through a dedicated precision partner ensures consistent supply and the backing of an established quality filter. Metav IndustryLine products are positioned to offer reliable, industrial-grade measuring standards that integrate into broader metrology programmes. The combination of normative compliance, hardened special steel construction and compact design supports both occasional verification and systematic calibration workflows, improving measurement confidence across the production chain. Contact Metav Werkzeuge today for ordering or to request detailed dimensional drawings and certificate options for this Metav IndustryLine Grade 0 single end gauge Technical data Article number: M319.0115.0 GTIN: 4054469130446 Customs tariff number: 90173000 Facts Nominal size: 1.15 mm Weight: 0.005 kg Cross-section: 30×9 mm (for sizes up to 10 mm) Tolerance class: Grade 0 Materials & features Material: Hardened special steel Standard: DIN EN ISO 3650 Category: End gauges / reference standards FAQ What is the intended use of this single end gauge? This single end gauge is intended as a dimensional reference standard for verification of small-length measurements, instrument checks and comparative calibration tasks. How precise is the 1.15 mm reference? Manufactured to DIN EN ISO 3650 and supplied as Grade 0, the gauge offers tight manufacturing tolerances suitable for reliable comparative checks in inspection and calibration routines. Can the gauge be used in daily workshop checks? Yes, the hardened special steel construction and compact cross-section make the gauge robust enough for frequent workshop verification of callipers and micrometers. Is the product traceable to a batch or production standard? The product is a standardised item from Metav IndustryLine and is supplied with identifying data such as article number M319.0115.0 and GTIN 4054469130446 for traceability in procurement and stock records. Which instruments pair well with this end gauge? The gauge is commonly paired with micrometers, precision callipers and gauge blocks for quick reference checks and instrument verification in both workshop and laboratory environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.16 mm End Gauge Class 1 DIN EN ISO 3650 Hardened Special Steel - Metav IndustryLine
Precise reference measurement with DIN EN ISO 3650 Grade 1 accuracy and a hardened special steel construction ensures reproducible dimensional checks; the nominal size 1.16 mm makes this block ideal for comparator work and fine inspection tasks. Order the gauge directly via Metav Werkzeuge or contact our consultants for advice on integrating this reference into existing inspection routines. End gauge 1.16 mm — Grade 1 reference block, hardened special steel (Metav IndustryLine) The End gauge 1.16 mm is a compact, precision reference block designed for dimensional inspection and comparative measurement in toolrooms and metrology environments. Precision to DIN EN ISO 3650 Grade 1 Hardened special steel construction Nominal size 1.16 mm for reference checks Reliable reference for dimensional inspection Manufactured to DIN EN ISO 3650, this reference block serves as a stable reference standard for comparative measurements and routine verification. The Grade 1 classification signals tight manufacturing tolerances under the relevant standard, which translates into consistent repeatability for pass/fail checks and comparator set-ups. For users who require clear criteria rather than subjective judgement, the normative backing reduces uncertainty in acceptance tests and inspection logs. Durable, stable construction for regular use The core material is special steel, delivered hardened to withstand repeated use and maintain dimensional stability. At approximately 5 g, the block is easy to handle while offering the mass and rigidity needed for short, repeatable contact measurements. A compact cross-section reduces risk of deformation at the contact faces, so the block remains a trustworthy reference even in busy workshop environments where handling is frequent. Practical handling and typical applications This small reference element is suited to comparator work, go/no-go checks, and integration into inspection benches for setting measuring machines or verifying micrometre and caliper readings. As a compact reference, it supports quick verification routines without the need for large gauge sets, enabling technicians to confirm calibration status or to spot-check tools and parts during production runs. The design emphasises ease of use and minimal handling time while preserving metrological value. Confidence through controlled manufacture and supply Sourced under the Metav IndustryLine label, the block benefits from Metav’s role as a quality filter for the European market: consistent availability, clear product specification and logistic reliability. Procurement through the established channel reduces administrative effort and supports traceable supply chains for production and inspection planning. For operations that prioritise steady supply and documented standards, this reference block offers a pragmatic balance between performance and procurement simplicity. For procurement or to discuss suitability for specific inspection tasks, contact Metav Werkzeuge to arrange supply of this Metav IndustryLine Grade 1 end gauge and obtain tailored advice on measurement integration. Technical data Article number: M319.0116.1 GTIN: 4054469130477 Norm: DIN EN ISO 3650 Grade: 1 Nominal size: 1.16 mm Material: Special steel, hardened Weight: 0.005 kg Category: End gauge Facts Nominal size 1.16 mm Weight 0.005 kg (≈ 5 g) Cross-section up to 10 mm: 30 x 9 mm; from 10.1 mm: 35 x 9 mm Customs tariff number: 90173000 Special features Hardened special steel construction Grade 1 tolerance according to DIN EN ISO 3650 Compact reference block for comparator and inspection work SKU: M319.0116.1 FAQ What tolerance class does this reference block meet? The block complies with DIN EN ISO 3650 and is produced to Grade 1, indicating tight manufacturing tolerances suitable for precise comparative checks and routine verification. Can this block be used for comparator and bench checks? Yes — the 1.16 mm reference block is intended as a reference standard for comparator set-ups, go/no-go checks and quick verification of measuring instruments. How robust is the surface and material? Constructed from hardened special steel, the block is designed for repeated contact use and retains dimensional stability under normal workshop handling. Is the block supplied with an article number for ordering and traceability? Yes — the article number is M319.0116.1 and the GTIN is 4054469130477 for catalogue and inventory tracking. What storage and handling practices are recommended? Keep the block clean, dry and stored in a stable environment to prevent contamination and corrosion; handle with care to avoid knocks that could affect the contact faces. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.16 mm Gauge Block Single-End, Grade 0, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of the combination of certified conformity, Grade 0 accuracy and a compact format for dependable reference measurements in calibration benches and inspection routines. Purchase the single gauge block directly via Metav Werkzeuge or request technical advice from their consultants for specification matching. Single gauge block 1.16 mm — Grade 0, DIN EN ISO 3650 (Metav IndustryLine) Single gauge block 1.16 mm is a precision reference for verification and adjustment of measuring instruments in both laboratory and workshop environments DIN EN ISO 3650 compliant Grade 0 accuracy Made from hardened special steel Compact single gauge block 1.16 mm Certified accuracy for reliable verification The block delivers Grade 0 dimensional accuracy in accordance with DIN EN ISO 3650, which makes it suitable as a reference standard for routine checks and instrument adjustments. With a nominal size of 1.16 mm, this gauge provides a definite, traceable value that assists in maintaining measurement chains and reduces uncertainty in inspection tasks. The standards conformity ensures consistency across quality control procedures and supports comparative checks against calibrated micrometres and calipers. Robust material and compact handling for daily use Manufactured from hardened special steel, the block combines wear resistance with thermal stability for predictable performance during repeated use. The compact cross-section of 30 x 9 mm (applicable for sizes up to 10 mm) and low mass of 0.005 kg enable easy handling and quick placement on measurement benches or in comparator fixtures. The form factor reduces the risk of accidental deformation and simplifies storage in a padded tray or protective case when not in use. Practical integration into quality workflows As a single reference element, the block functions as a quick calibration standard for checking instrument zero points and linearity at the lower end of the measuring range. It is suitable for laboratory technicians and workshop inspectors who require a stable, repeatable reference for routine verification, set-up tasks and intermittent checks. The material choice and conformity to DIN EN ISO 3650 support long-term traceability within documented quality systems. Contact Metav Werkzeuge in Emmerich for advice on matching this Metav IndustryLine gauge block to existing measurement chains or to arrange supply from the local warehouse. Technical Data Article number: M319.0116.0 SKU: M319.0116.0 GTIN: 4054469130460 Label: Single gauge block 1.16 mm, DIN EN ISO 3650, Grade 0 Manufacturer: Metav IndustryLine Facts Nominal size: 1.16 mm Weight: 0.005 kg Tariff number: 90173000 Cross-section (applicable): 30 x 9 mm Special features Material: Special steel, hardened Standard: DIN EN ISO 3650 Accuracy class: Grade 0 Product type: Single gauge block Category: Gauge blocks / End measures FAQ What level of accuracy does this gauge block provide? The single gauge block 1.16 mm is manufactured to Grade 0 tolerance under DIN EN ISO 3650, providing a reference suitable for precise verification tasks in inspection and calibration. Which material is used and how does it affect use? Made from hardened special steel, the block offers good wear resistance and thermal behaviour; the material choice supports stable readings during repeated bench checks with the single gauge block 1.16 mm. Can this block be used to check micrometres and calipers? Yes. The block functions as a reference for verifying zero points and short-range linearity of micrometres and calipers during routine workshop inspections. How should the block be stored to maintain accuracy? Store the gauge block in a clean, dry environment on a padded tray or in a protective holder to avoid surface damage; the compact 30 x 9 mm cross-section aids safe handling and storage. Is this product traceable for quality documentation? The block is produced to DIN EN ISO 3650 and can be incorporated into documented quality-control procedures to support traceability within inspection records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.16mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of the combination of ceramic construction, Grade 1 DIN 861/1 accuracy and a compact 1.16 mm nominal size for a stable reference standard in calibration and inspection tasks; order directly via Metav Werkzeuge or consult the Metav specialists for assistance. Ceramic gauge block 1.16 mm, Grade 1 DIN 861/1 (Metav IndustryLine) Ceramic gauge block 1.16 mm, Grade 1 DIN 861/1 provides a stable, wear‑resistant reference standard for precision length calibration and routine inspection in metrology laboratories and quality control environments Ceramic material for dimensional stability Grade 1 accuracy according to DIN 861/1 Nominal length 1.16 mm for precision stacking Lightweight 1 g measuring element Stable reference that improves measurement repeatability A compact, single‑element gauge block made from ceramic supplies a consistent datum for gauge sets and calibration chains. The small nominal length of 1.16 mm makes this item particularly useful when building precise stacks or when a fine incremental step is required in calibration routines. Ceramic construction delivers a wear‑resistant contact surface that helps sustain repeatability over many cycles; this means fewer adjustments and more reliable comparative measurements in day‑to‑day inspection work. Conformity and suitability for routine quality control Classified as Grade 1 (DIN 861/1), the block meets a widely recognised tolerance class for workshop and laboratory standards. That classification signals suitability for traceable control tasks and for creating reference stacks used in dimensional checks. The clear standard reference supports process stability and simplifies compliance with internal quality procedures, making the component a pragmatic choice for both routine inspections and as part of a master set for periodic verification. Practical handling, traceability and workshop integration At approximately 1 g the component is exceptionally lightweight and easy to handle when assembling stacks or arranging storage trays. Its compact format minimises thermal mass, helping the block approach ambient temperature quickly—advantageous during successive calibration cycles. Markings such as the SKU and GTIN ensure traceability in inventory and calibration records, supporting systematic documentation and rapid identification within quality systems. Contact the Metav Werkzeuge specialists in Emmerich for procurement guidance and specification matching — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss integration into existing calibration sets Technical data SKU: M324.001.16 GTIN: 4054469142531 Tariff code: 90173000 Category: End gauges (Measuring instruments) Label: Keramik-Endmaß 1,16mm, Güte 1 DIN 861/1 Facts Nominal size: 1.16 mm Weight: 0.001 kg Grade: 1 (DIN 861/1) Special features Material: Ceramic Intended use: Precision reference for calibration and inspection Product family: End gauge / gauge block Manufacturer line: Metav IndustryLine FAQ What tolerance class does this gauge block meet? The gauge block is specified as Grade 1 according to DIN 861/1, making the Ceramic gauge block 1.16 mm suitable for standard workshop and laboratory calibration tasks. Is the ceramic material suitable for regular stacking and use in a gauge set? Yes, the ceramic construction of the Ceramic gauge block 1.16 mm offers a wear‑resistant contact surface intended for repeated stacking and routine reference use within a set. How is the product identified for traceability? Identification is provided via SKU M324.001.16 and GTIN 4054469142531, enabling clear traceability and record keeping for the Metav IndustryLine ceramic end gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.17 mm Gauge Block Grade 1, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of DIN EN ISO 3650 conformity and Grade 1 accuracy combined with hardened construction for a dependable reference standard in workshop and inspection environments. The compact 1.17 mm nominal size and low mass ensure fast handling and minimal thermal drift; order the end gauge directly via Metav Werkzeuge or ask our consultants if needed. End gauge 1.17 mm (Grade 1) – hardened special steel, DIN EN ISO 3650 The End gauge 1.17 mm is a precision gauge block for use as a reference standard in workshop measuring, inspection and assembly processes DIN EN ISO 3650 Grade 1 accuracy Nominal size 1.17 mm for fine reference checks Hardened special steel construction Consistent reference precision for quality control The gauge block delivers Grade 1 accuracy in accordance with DIN EN ISO 3650, providing a reliable reference for routine inspections and setting-up tasks. As a small-size reference at 1.17 mm, it reduces measurement uncertainty when used as an assembly or master gauge, enabling traceable checks against machine and hand-measurement methods. The standardised tolerance class ensures repeatable results across shifts and operators, supporting process stability and reliable acceptance testing. Robust construction supports daily workshop use Manufactured from hardened special steel, the block is dimensionally stable and resistant to wear in normal metrology environments. Its compact cross-section (30 x 9 mm) and low mass (0.005 kg) make it easy to manoeuvre during frequent checks while limiting thermal lag when transferred between benches. The material choice balances hardness with handling comfort, reducing the likelihood of surface damage during routine use and extending the practical service life of the reference piece. Designed for seamless integration into inspection workflows The format and tolerances of this gauge suit calibration chains, go/no-go checks and comparative measurements in production and maintenance departments. Use as a reference for setting micrometres, dial gauges or comparator stages, or as a secondary master for incoming inspection. Clear conformity to DIN EN ISO 3650 simplifies documentation and audit trails, helping to align shop-floor practice with quality management requirements without complex procedural changes. Practical data that supports procurement and inventory The block's compact footprint and standardised grade make it simple to store with other end gauges and to specify in procurement lists. The nominal dimension and material provide an immediate indication of suitability for fine mechanical parts and close-tolerance assemblies. Where catalogue identification is required, the item is supplied with an assigned SKU and GTIN to aid logistics and traceability in larger tool inventories. Contact Metav Werkzeuge for specialist advice on gauge selection or to order the Metav IndustryLine end gauge directly from our Emmerich hub Technical Data Article number: M319.0117.1 GTIN: 4054469130491 Nominal size: 1.17 mm Material: Special steel, hardened Standard: DIN EN ISO 3650 Grade: 1 Weight: 0.005 kg Tariff number: 90173000 Numbers / Core technical data Nominal dimension: 1.17 mm Cross-section (for ≤10 mm): 30 x 9 mm Weight: 0.005 kg GTIN: 4054469130491 SKU: M319.0117.1 Special features / Versions Hardened special steel Conforms to DIN EN ISO 3650 Grade 1 accuracy Category: End gauge (gauge block) FAQ What accuracy class does this gauge block meet? This end gauge meets Grade 1 accuracy in accordance with DIN EN ISO 3650, making it suitable as a workshop reference standard for fine measurement tasks. Which material is used for the gauge and why? The block is made from hardened special steel, selected for dimensional stability and wear resistance under normal calibration and inspection use. Is this item identified for stock and logistics? Yes; the end gauge is listed under SKU M319.0117.1 and GTIN 4054469130491 for straightforward inventory management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.17 mm Gauge Block Single End, Hardened Special Steel, DIN EN ISO 3650 Grade 0 - Metav IndustryLine
Take advantage of DIN EN ISO 3650 Grade 0 accuracy, a hardened special steel construction and the compact 1.17 mm nominal size to secure a stable traceable reference standard for small-part inspection; order directly via Metav Werkzeuge or consult the specialists for application support. Gauge block 1.17 mm — Single gauge block, DIN EN ISO 3650, Grade 0 (Metav IndustryLine) The gauge block 1.17 mm is a single, precision ground reference element designed for high-accuracy length standards and small-part inspection tasks in calibration labs and workshops. DIN EN ISO 3650 Grade 0 accuracy Nominal size 1.17 mm for fine references Hardened special steel construction Compact cross-section for secure seating Reliable metrological performance for calibration and control This precision element serves as a traceable reference for length checks and calibration work. Manufactured to DIN EN ISO 3650 with Grade 0 tolerance, it provides a reproducible baseline that reduces measurement uncertainty when used in comparator stacks or as a single reference. The Grade 0 specification indicates a tight manufacturing tolerance suitable for calibration laboratories and quality-control benches where consistent, verifiable dimensions are required. Using such a standard simplifies conformity checks and supports documented inspection routines. Durable construction that maintains accuracy under handling Made from hardened special steel, the block resists wear and keeps its geometry over repeated use, which preserves the reference value over time. The material choice balances hardness and stability so that flatness and parallelism remain within specification after normal handling. The compact design and the specified cross-section allow secure seating in holders and clean wringing with other gauge blocks, which aids quick stack build-up and exact dimension transfer. These practical attributes lower the risk of damage and help maintain long-term measurement reliability. Practical benefits in workshop and laboratory workflows As a single small-size reference, this block is particularly useful for fine adjustments, short-length calibration checks and setting up micromachining operations. The nominal 1.17 mm size is convenient for verifying small gaps, punches and fine features where larger standards are impractical. Its low mass facilitates rapid thermal equilibration, reducing temporary measurement drift when brought from storage to the measurement environment. The compact form factor also makes it straightforward to include in inspection kits and portable comparator sets, improving responsiveness during production checks. Integration into traceable measurement systems Designed for use within a documented calibration chain, the block supports routine verification and corrective action workflows. When incorporated into stack-ups or compared against higher-level standards, it provides a measurable link that helps demonstrate compliance with quality systems. The straightforward geometry and standardised tolerance class simplify uncertainty budgeting: engineers and technicians can attribute a known reference contribution when calculating total measurement uncertainty, enabling informed decisions about process capability and acceptance criteria. Discuss application suitability with Metav Werkzeuge to ensure this block matches the intended measurement chain and to arrange procurement through the Metav network Technical Data Article number: M319.0117.0 GTIN: 4054469130484 Standard: DIN EN ISO 3650 Grade: 0 Material: Hardened special steel Numerical data Nominal size: 1.17 mm Weight: 0.005 kg Cross-section: 30 x 9 mm (≤10 mm) / 35 x 9 mm (>10.1 mm) Tariff code: 90173000 ECLASS: 21170108 Special features Single gauge block for reference and calibration Precision ground and finished faces Compact form for small-part inspection Category: Gauge blocks (Measuring instruments > Gauge blocks) FAQ What tolerance class does this gauge block conform to? The gauge block conforms to DIN EN ISO 3650 Grade 0, offering the tight manufacturing tolerances expected for laboratory-level reference elements. Is the material specified for wear resistance and stability? Yes, the block is manufactured from hardened special steel, chosen to provide wear resistance and geometric stability for repeated wringing and handling. For which applications is a 1.17 mm nominal block recommended? This small nominal size is recommended for fine calibration tasks, short-length checks, micromachining setups and any situation requiring a compact reference element. Can this block be used in stack-ups for comparator measurements? The block is suitable for wringing and stacking with other gauge blocks and may be used in comparator stacks to build up required reference lengths. What is the article number or SKU for ordering and traceability? The article number is M319.0117.0; this identifier can be quoted when ordering or documenting the reference element. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.17mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Secure consistent measurement results by combining Grade 1 accuracy (DIN 861/1), the durable ceramic construction and the compact 1.17 mm nominal size; order the ceramic end gauge directly via Metav Werkzeuge or ask our consultants if needed. Ceramic End Gauge 1.17 mm, Grade 1 DIN 861/1 by Metav IndustryLine A Ceramic End Gauge 1.17 mm, Grade 1 DIN 861/1 serving as a high-precision reference for calibration and inspection tasks in toolrooms and quality departments. Grade 1 accuracy to DIN 861/1 Ceramic body for stable dimensions and wear resistance Nominal size 1.17 mm for fine master settings Reliable reference for precise checks This grade‑certified end gauge provides a compact reference for dimensional verification where precision is essential. The Grade 1 classification under DIN 861/1 denotes tight geometric tolerances suitable for calibration benches and fine inspection processes. Thanks to the ceramic construction, the gauge maintains dimensional stability over time, supporting repeatable results in a workshop or laboratory environment. The small nominal size of 1.17 mm makes this piece particularly useful for setting measuring instruments and verifying features where fine control is required. Durability and handling that support uptime A solid ceramic workpiece resists surface wear and preserves its reference faces under regular use, reducing the need for frequent replacement. This contributes to sustained measurement confidence and lower long‑term maintenance of the inspection chain. The low mass and compact form factor allow straightforward placement in gauge sets and inspection trays while the product’s format keeps handling intuitive for trained technicians. For production environments seeking stable master references, this end gauge is a pragmatic choice that balances longevity with manageable handling. Integration into quality workflows As a standard reference element, the end gauge fits into routine inspection sequences and master sets used for toolmaking, assembly control and instrument verification. Documented traceability is supported by clear labelling and industry identifiers, which simplifies inventory and audit procedures. The sample’s small footprint allows it to be stored alongside other precision artefacts, and its material characteristics reduce sensitivity to brief temperature fluctuations compared with some metallic gauges, aiding consistency in everyday measurement tasks. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine ceramic end gauge into existing calibration sets or for ordering information Technical data Article number: M324.001.17 GTIN: 4054469142548 Material: Ceramic Nominal size: 1.17 mm Grade: 1 (DIN 861/1) Weight: 0.001 kg Tariff number: 90173000 Facts eClass: 21170108 Category: End gauge Label: Keramik-Endmaß 1,17mm, Güte 1 DIN 861/1 Special features Brand: Metav IndustryLine Compact reference gauge for fine calibration Durable ceramic for sustained surface integrity FAQ What tolerance class does this end gauge meet? The Ceramic End Gauge 1.17 mm, Grade 1 DIN 861/1 meets the tolerances defined for Grade 1 under DIN 861/1, providing a tight geometric reference for inspection tasks. Is the material appropriate for long‑term reference use? Yes. The ceramic construction of the Ceramic End Gauge 1.17 mm offers high surface hardness and preserves face quality under normal handling, making it suitable as a stable reference in master sets. Can this gauge be included in a calibration set alongside metallic masters? The Ceramic End Gauge 1.17 mm can be used together with metallic standards; its small size and stable faces make it appropriate for inclusion in mixed material calibration sets and inspection trays. Which identifiers should be used for procurement and inventory? Use the Article number M324.001.17 and GTIN 4054469142548 to order or catalogue the Ceramic End Gauge 1.17 mm; the item is listed under the End gauge category by Metav IndustryLine. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.18 mm End Gauge Single Piece Grade 0 DIN EN ISO 3650 Hardened Special Steel - Metav IndustryLine
Combine Grade 0 accuracy with DIN EN ISO 3650 traceability and a hardened special steel construction for a compact, reliable reference standard; order via Metav Werkzeuge or consult the technical advisers for application guidance. Single gauge block 1.18 mm — Grade 0, hardened special steel (Metav IndustryLine) A single gauge block Single gauge block 1.18 mm serving as a high-precision reference for laboratory calibration, gauge sets and inspection tasks in workshop metrology. Grade 0 accuracy (DIN EN ISO 3650) Hardened special steel construction Nominal length 1.18 mm, compact reference Traceable reference that strengthens quality control As a precision reference, this gauge block delivers reproducible dimensional control where tolerances matter. The combination of DIN EN ISO 3650 conformity and Grade 0 production tolerances ensures that measurements taken against this block form a reliable baseline for inspection or calibration work. For production environments where statistical process control and documented traceability underpin quality systems, the block functions as a compact standard that supports consistent verification and reduces uncertainty in comparative measurements. Durable build for repeated workshop use Manufactured from hardened special steel, the block is engineered to withstand frequent handling and stacking during setup and measurement. The compact cross-section (30 x 9 mm for the nominal size range) and the low mass make it easy to incorporate into gauge sets without adding bulk, while the hardened surface improves wear resistance over time. Durability means fewer replacements and a lower total cost of ownership for calibration equipment, allowing workshop teams to rely on a stable reference when checking tools, fixtures or measuring instruments. Practical integration into calibration workflows Designed as a single end standard, this block is suitable for use in instrument verification, gauge set extension and as a reference in calibration benches. The compact nominal length 1.18 mm facilitates fine adjustments and the nominal dimensions are directly compatible with standard stacking methods used in precision measurement. Identification via GTIN and SKU simplifies procurement and inventory management, while the clear specification reduces lead time for technical approvals and documentation in regulated environments. For procurement or technical advice on the Metav IndustryLine single gauge block — including suitability for specific calibration tasks — contact Metav Werkzeuge GmbH for direct assistance and ordering information. Technical data Article number: M319.0118.0 GTIN: 4054469130507 Category: Endmasse Facts Nominal size: 1.18 mm Weight: 0.005 kg Tariff number: 90173000 Cross-section (for sizes ≤ 10 mm): 30 x 9 mm Special features DIN EN ISO 3650 conformity Grade 0 accuracy Material: hardened special steel Single gauge block design Category path: Messgeräte › Endmasse FAQ What tolerance class does this gauge block meet? The single gauge block conforms to DIN EN ISO 3650 and is manufactured to Grade 0, providing the high precision required for laboratory and workshop reference work. Is the material specified for durability and wear resistance? Yes, the block is produced from hardened special steel, chosen for its stability and resistance to wear during repeated use. Can this block be used in stacked gauge sets? The block’s compact nominal length and standard cross-section make it suitable for stacking and use alongside other gauge blocks as part of a reference set. How is the product identified for ordering and inventory? Ordering and stock control can be managed using the SKU M319.0118.0 and GTIN 4054469130507, which appear on product documentation. What typical applications suit this reference standard? Typical uses include instrument verification, calibration benches, dimensional checks in inspection tasks, and extending gauge block sets where a compact, precise reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.18 mm Gauge Block Stainless Hardened Steel DIN EN ISO 3650 Grade 1 - Metav IndustryLine
Take advantage of a proven metrology standard: the combination of DIN EN ISO 3650 conformity, Grade 1 accuracy and a hardened special steel construction ensures reproducible dimensional references for workshop and laboratory use; order the gauge block directly via Metav Werkzeuge or ask the Metav consultants for application advice. End gauge 1.18 mm, DIN EN ISO 3650 — Gauge block, Grade 1, hardened special steel (Metav IndustryLine) End gauge 1.18 mm, DIN EN ISO 3650 is a compact, high-precision reference block designed for dimensional verification and master setting in production and inspection environments. DIN EN ISO 3650 standard compliant Class 1 precision tolerance Hardened special steel construction Precise reference for repeatable dimensional checks A small, stable reference: this gauge block with a nominal size of 1.18 mm is produced to DIN EN ISO 3650 and manufactured as Grade 1, giving a clearly defined tolerance band for comparative and calibration tasks. The hardened special steel body reduces wear and maintains flatness and parallelism over repeated use, which translates into consistent measurement results on comparators, micrometre stands and control benches. For quality assurance teams and toolrooms the benefit is straightforward — a reliable physical standard that supports traceable routine checks and setup work. Durable construction that supports industrial workflows Built for workshop conditions, the hardened material and compact cross-section make handling and stacking straightforward while resisting deformation. The specified cross-section provides a solid contact area: up to 10 mm: 30 × 9 mm; from 10.1 mm: 35 × 9 mm, which helps maintain contact stability during comparative measurements. This characteristic reduces user-induced variance and helps production staff achieve faster set-ups and fewer rework cycles — a clear efficiency gain for repeated processes where small dimensional shifts have a cost impact. Practical use and integration into inspection routines The block serves as a master standard for setting gauges, checking micrometres and verifying measuring fixtures; its compact mass and form factor allow easy placement in a standards kit or protective rack between uses. When integrated into routine control plans it contributes to improved process reliability and documentation of measurement capability. Backing from a specialist dealer like Metav IndustryLine provides access to a broad range of complementary standards and replacement pieces, supporting a dependable supply chain for metrology equipment across workshops and small industrial labs. Choose the Metav IndustryLine Grade 1 reference block for dependable dimensional references — contact Metav Werkzeuge in Emmerich for delivery information and technical guidance: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: M319.0118.1 GTIN: 4054469130514 Category: End gauges (gauge blocks) Facts Nominal size: 1.18 mm Mass: 0.005 kg Tariff code: 90173000 Special features Material: Special steel, hardened Standard: DIN EN ISO 3650, Grade 1 Cross-section: up to 10 mm — 30 × 9 mm; from 10.1 mm — 35 × 9 mm FAQ What tolerance class does this gauge meet? The End gauge 1.18 mm is supplied to Grade 1 in accordance with DIN EN ISO 3650, providing the tolerance band expected for fine workshop and inspection use. Which material is used for the block? The block is made from hardened special steel, chosen for its wear resistance and dimensional stability under typical workshop conditions. Can this block be used as a setting master for micrometres? Yes, the End gauge 1.18 mm is suitable as a reference standard for setting and checking micrometres, comparators and other dimensional gauges. What cross-section does the block have and why does that matter? The block provides a contact area sized 30 × 9 mm for sizes up to 10 mm and 35 × 9 mm from 10.1 mm, ensuring stable seating and reduced measurement variation during comparative checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.18mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of a truly stable reference length with ceramic construction, Grade 1 accuracy (DIN 861/1) and the compact 1.18 mm nominal size — ideal for calibration benches and fine inspection work. Order the ceramic gauge block directly via Metav Werkzeuge or ask our consultants for application advice. Ceramic gauge block 1.18 mm – Grade 1 (DIN 861/1) by Metav IndustryLine A Ceramic gauge block 1.18 mm designed as a compact, high‑precision reference for length calibration and comparison measurements in metrology and quality control. Grade 1 accuracy (DIN 861/1) Stable ceramic material Reference length 1.18 mm Reliable accuracy for everyday calibration needs The block delivers consistent dimensional reference based on its Grade 1 classification according to DIN 861/1, which ensures repeatable results in routine calibration and inspection tasks. A clearly defined nominal size of 1.18 mm simplifies traceable checks of instruments and small features, while the Grade 1 rating provides a dependable tolerance class for shop‑floor and laboratory checks. This translates into faster decision making during quality control because uncertainty is reduced and measurement comparisons become straightforward. Material benefits that support longevity and reproducibility Crafted from ceramic, the component offers excellent wear resistance and dimensional stability compared with many metals, which helps preserve the reference length over repeated use. Ceramic’s low susceptibility to corrosion and minimal reaction to surface contaminants mean the reference remains usable with reduced maintenance effort. For users seeking a stable standard for frequent checks, these material properties extend the service life of the reference and support consistent measurement outcomes. Practical handling and integration into measurement routines The compact format suits calibration benches, comparator setups and close‑tolerance inspection of small parts. As a gauge block, it is suited for stacking or direct comparison workflows where a precise short reference is required. The lightweight form factor also eases handling during swift verification sequences, enabling technicians to keep throughput high without compromising on precision. Clear labelling and a dedicated SKU simplify inventory management and traceability within quality systems. For traceable, compact reference lengths from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for ordering and tailored technical guidance — reliable supply and expert advice are available from the Metav team. Technical data SKU: M324.001.18 GTIN: 4054469142555 Material: Ceramic Nominal size: 1.18 mm Grade: 1 (DIN 861/1) Net weight: 0.001 kg Tariff code: 90173000 Core figures Nominal length 1.18 mm Weight 0.001 kg GTIN 4054469142555 Special features Ceramic material Category: Endmasse (gauge block) Brand: Metav IndustryLine FAQ What tolerance class does this gauge block meet? The ceramic gauge block meets Grade 1 tolerance according to DIN 861/1, making it suitable for standard calibration and inspection tasks. Is the nominal length 1.18 mm traceable for calibration procedures? Yes, the 1.18 mm nominal size serves as a compact reference length for traceable checks and comparative measurements in quality control workflows. Which material is used and what are its advantages? The block is made from ceramic, offering improved wear resistance and dimensional stability compared with many metallic references, which supports reproducible measurement results. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.19 mm End Gauge, DIN EN ISO 3650 Grade 0, Hardened Special Steel - Metav IndustryLine
Take advantage of the combination of DIN EN ISO 3650 conformity, Grade 0 accuracy and hardened special steel construction for a reliable workshop reference; order the end measure directly via Metav Werkzeuge or consult our specialists for application advice. Gauge block 1.19 mm (Grade 0) – Metav IndustryLine precision end measure, DIN EN ISO 3650 The Gauge block 1.19 mm (Grade 0) is a compact precision end measure for dimensional control and master-setting in calibration labs and quality departments. Grade 0 accuracy to DIN EN ISO 3650 Hardened special steel construction Compact cross-section 30 × 9 mm for handling Calibrated reference size 1.19 mm Precision that supports reproducible measurement results The supplied end measure serves as a traceable reference for setting and checking measuring equipment in production and inspection. Conforming to DIN EN ISO 3650 and manufactured to Grade 0, the component provides the reproducibility required for reference stacks and comparator work. Its nominal size of 1.19 mm is maintained by controlled hardening and finishing processes, which reduce wear and dimensional drift; this makes the block suitable as a stable master for periodic checks and for transferring dimensional tolerances into the workshop. Robust build and compact handling for everyday use Constructed from hardened special steel, the block combines surface stability with mechanical resilience. The cross-section for this nominal size is 30 × 9 mm, giving a compact, easy-to-handle form that resists twisting during manual handling and stacking. At approximately 0.005 kg, the gauge is lightweight yet robust enough for repeated use; the material choice and finishing reduce the need for frequent replacement, supporting steady throughput in busy inspection routines and lowering long-term maintenance effort. Practical integration into quality workflows The small-format end measure integrates smoothly into calibration stacks, comparator setups, micrometre checks and fixture validation. As a standardised piece, it simplifies inventory and traceability when paired with a clear SKU and GTIN for procurement and record keeping. Being part of the Metav IndustryLine range, the item benefits from an established supply chain and a quality filter in Emmerich that supports consistent availability for industry and craft—an argument for reliable planning rather than intermittent sourcing. Contact Metav Werkzeuge today to secure this Grade 0 end measure from the Metav IndustryLine and to discuss optimal use in calibration or inspection tasks Technical data SKU: M319.0119.0 GTIN: 4054469130521 Norm: DIN EN ISO 3650 Article category: Endmasse Facts Nominal size: 1.19 mm Tolerance grade: 0 Weight: 0.005 kg Cross-section (≤ 10 mm): 30 × 9 mm Customs tariff number: 90173000 Special features Material: Special steel, hardened Manufacturer range: Metav IndustryLine Intended use: Reference end measure for calibration and master stacks Packaging: single piece FAQ What accuracy can be expected from this gauge block? The Grade 0 rating on this 1.19 mm end measure denotes high manufacturing precision in accordance with DIN EN ISO 3650, offering reproducible dimensional performance suitable for reference and comparative measurement tasks. Is this end measure suitable for use in a calibration laboratory? Yes. The Metav IndustryLine gauge block is designed as a reference component for calibration labs, comparator setups and workshop quality control where DIN EN ISO 3650 conformity is required. What is the material and why does it matter? The block is made from hardened special steel; this material provides dimensional stability, wear resistance and a reliable surface finish that preserves the nominal size over repeated use. Can this block be combined with other sizes for a gauge stack? The 1.19 mm end measure is intended to be used as part of a stack or as a single reference for setting instruments; its compact cross-section and conformity to standard norms facilitate combination with other standard gauge blocks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.19 mm Gauge Block Grade 1, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of a certified measuring standard that combines DIN EN ISO 3650 Grade 1 conformity, a 1.19 mm nominal size and hardened special steel construction for reliable, repeatable gauging in inspection and production control; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. End gauge 1.19 mm — hardened special steel, DIN EN ISO 3650 Grade 1 (Metav IndustryLine) The End gauge 1.19 mm, DIN EN ISO 3650 serves as a hardened reference gauge for precision dimensional control and pass/fail checks in inspection, calibration and assembly applications. DIN EN ISO 3650 Grade 1 accuracy Hardened special steel construction Nominal size 1.19 mm for tight fits Compact cross-section for stable handling Reproducible accuracy for production and inspection The gauge is manufactured to DIN EN ISO 3650 with Grade 1 tolerance, making it suitable as a reference for high-precision pass/fail checks and dimensional verification. By specifying a tight nominal size of 1.19 mm, the component provides a repeatable go/no-go reference that supports consistent acceptance criteria on the shop floor or in the quality lab. The adherence to the stated standard reduces uncertainty in inspection routines and speeds decision-making in serial production. Robust, compact design that aids handling and stability Made of hardened special steel, the gauge combines wear resistance with dimensional stability under normal workshop conditions. The compact cross-section (30 x 9 mm for nominal sizes up to 10 mm) gives a low moment of inertia and easy manipulation during frequent checks; at the same time the low mass (0.005 kg) limits the influence of handling on results. This geometry is beneficial where small gauges are used for repetitive checks, helping to maintain measurement integrity without excessive operator fatigue. Clear identification and supply chain transparency Identification data such as SKU M319.0119.1 and GTIN 4054469130538 make procurement and traceability straightforward for purchasing and inventory systems. As a Metav IndustryLine article, the gauge is offered from a European distribution centre that acts as a quality filter for the market, ensuring fast availability and consistent product specification. The combination of standard conformity and unambiguous product identifiers simplifies integration into inspection procedures and documentation. Contact Metav Werkzeuge for procurement advice or to request SKU M319.0119.1 from our Emmerich stock. Technical Data Article number: M319.0119.1 GTIN: 4054469130538 Nominal size: 1.19 mm Standard: DIN EN ISO 3650 Grade: 1 Material: special steel, hardened Weight: 0.005 kg Cross-section (≤ 10 mm): 30 x 9 mm Facts Category: End gauges Tariff code: 90173000 SKU: M319.0119.1 Manufacturer brand: Metav IndustryLine Special features Conformity: DIN EN ISO 3650, Grade 1 Construction: hardened special steel Application: reference gauge for pass/fail checks and dimensional control Compact dimensions for ease of handling FAQ What standard does the gauge conform to? The gauge is manufactured to DIN EN ISO 3650 and specified as Grade 1 for high-precision reference use. What is the nominal size and how is it identified? The nominal size is 1.19 mm and the item is identified as SKU M319.0119.1 (GTIN 4054469130538). What material is the gauge made from? The component is produced from hardened special steel, selected for wear resistance and dimensional stability. Is a calibration certificate included with the gauge? Product data does not specify delivery with an ISO 17025 calibration certificate; calibration status is not indicated in the available information. Which applications are suitable for this gauge? Typical uses include pass/fail gauging, bench inspection, incoming component checks and routine dimensional verification in production environments. How should the gauge be referenced in documentation and ordering? Use the full identification (Metav IndustryLine End gauge, nominal size 1.19 mm, SKU M319.0119.1, GTIN 4054469130538) to ensure accurate procurement and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.19mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Combine the Grade 1 accuracy with the thermal stability of ceramic in a compact 1.19 mm reference gauge block for reproducible workshop and laboratory checks. Order the ceramic gauge block directly via Metav Werkzeuge or ask our consultants for advice on integration and stock supply. Ceramic gauge block 1.19 mm, Grade 1 (DIN 861/1) — Metav IndustryLine Ceramic gauge block 1.19 mm (Grade 1) for high-precision length references and calibration tasks in industrial metrology and quality control. Ceramic material for thermal stability Grade 1 accuracy per DIN 861/1 Nominal length 1.19 mm For calibration and reference standards Precision and stability for dependable measurements The compact ceramic reference offers a nominal length of 1.19 mm with Grade 1 conformity to DIN 861/1, making it suitable as a short-range reference in calibration benches and workshop setups. Ceramic's low thermal expansion gives improved dimensional stability compared with steel at small sizes, reducing temperature-related drift during short comparative measurements. As a small-format reference, this gauge block supports routine checks where repeatability and consistency are required rather than long-span gauging. Durable material and consistent long-term performance Constructed from high-performance ceramic, the block provides excellent wear resistance and inherent corrosion immunity, which lowers maintenance needs and extends service life as a reference artefact. Its non-metallic nature helps avoid magnetic interference in sensitive measurement environments and limits surface contamination typical of softer metals. The compact format minimises handling effort and, when stored correctly, maintains flatness and length stability for frequent use as a workshop or laboratory standard. Straightforward use in calibration workflows This gauge block integrates easily into set-ups for setting micrometres, verifying comparator readings or checking fixture references; it complements larger reference sets where short, precise distances are required. Traceability is supported by the block's compliance with DIN 861/1, which clarifies tolerance bands and enables predictable substitution into existing calibration routines. For bespoke calibration requirements or traceable certification, Metav Werkzeuge can advise on appropriate calibration services and matching standards for coherent measurement chains. For traceable reference standards supplied from our Emmerich quality hub, contact Metav Werkzeuge for tailored advice on the Metav IndustryLine ceramic gauge block M324.001.19 and seamless procurement options. Technical data Article number: M324.001.19 GTIN: 4054469142562 Material: Ceramic Nominal length: 1.19 mm Grade: 1 (DIN 861/1) Category: Gauge blocks Facts Weight: 0.001 kg Tariff number: 90173000 Nominal length: 1.19 mm Grade classification: Grade 1 per DIN 861/1 Special features Ceramic construction Low thermal expansion High wear resistance Intended for calibration and reference use Compact reference length FAQ What tolerance class does this gauge block meet? The ceramic gauge block meets Grade 1 tolerances in accordance with DIN 861/1, providing a clearly defined accuracy class for short-range reference use. Is the block suitable for environments sensitive to magnetism? Yes, the ceramic construction of the M324.001.19 is non-magnetic, making it appropriate for measurement contexts where magnetic interference must be avoided. Can this block be used for routine workshop calibration? This ceramic gauge block is designed for routine checks, micrometre setting and comparative measurements as a short-range reference within a calibration workflow. How should the block be stored to preserve accuracy? Store the block in a clean, dry environment, ideally in its original packaging; handle with lint-free gloves or cloth to avoid oils and particles on the measuring faces. Is the 1.19 mm size compatible with standard gauge block sets? The nominal length of 1.19 mm complements standard sets for filling small gaps and for precise short-distance references in both laboratory and workshop assemblies. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.1mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Benefit from Grade 1 accuracy, the thermal stability of ceramic construction and the compact 1.10 mm nominal size for reproducible reference checks. Order the ceramic end gauge 1.10 mm directly via Metav Werkzeuge or ask our consultants if needed. Ceramic end gauge 1.10 mm — Grade 1, DIN 861/1 (Metav IndustryLine) The Ceramic end gauge 1.10 mm is a compact reference standard designed for fine metrology tasks and dimensional verification in inspection benches and quality labs. High-stability ceramic construction Precision Grade 1 per DIN 861/1 Nominal size 1.10 mm exact Ultra-light, compact reference at 1 g Repeatable reference for small-dimension checks As a Grade 1 reference under DIN 861/1, this ceramic end measure offers a dependable baseline for verification of fine features and comparative checks. The 1.10 mm nominal size suits tasks where a precise, small standard is needed, such as checking pin gauges, fine bores or setting micrometres. Use as a standalone reference or as part of a set to reduce measurement uncertainty in routine inspections; the specified grade ensures consistent dimensional behaviour suitable for factory and laboratory environments. Material benefits that support stable measurements Constructed from high‑performance ceramic, the gauge combines low thermal expansion and excellent wear resistance for sustained dimensional stability. Ceramic also provides electrical insulation and non‑magnetic behaviour, helping to avoid measurement bias in sensitive environments. The material choice reduces the need for frequent replacement and maintains reliable contact surfaces over many cycles, which contributes directly to lower total cost of ownership for reference equipment. Practical integration into inspection workflows The compact format and ultra-light mass make the gauge easy to handle and store within a calibration set or inspection kit. Clear identification (GTIN and SKU M324.001.1) simplifies inventory control and traceability in quality management systems. As a simple, durable reference, it supports faster setup times at test benches and aids in maintaining consistent process control across production shifts — a pragmatic choice for workshops and calibration labs seeking dependable small-size standards. Specify the Metav IndustryLine ceramic end gauge for stable, repeatable references — contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored advice and supply. Technical data SKU: M324.001.1 GTIN: 4054469142470 Material: Ceramic Nominal size: 1.10 mm Grade: 1 (DIN 861/1) Weight: 0.001 kg Tariff code: 90173000 Facts Nominal dimension: 1.10 mm Mass: 0.001 kg Grade designation: 1 ECLASS: 21170108 Special features Category: End measures Compact, single-piece ceramic construction Suitable for fine-dimension reference tasks Manufacturer: Metav IndustryLine FAQ What tolerance class does this ceramic end gauge meet? The ceramic end gauge meets Grade 1 precision according to DIN 861/1, providing a consistent reference for fine measurements. For which applications is a 1.10 mm end measure suitable? A 1.10 mm end measure is ideal for verifying small bores, pin gauges, setting micrometres and other fine-dimension checks where a compact reference is required. Is the material suitable for magnetic-sensitive environments? Yes, the ceramic construction is non‑magnetic and stable under varying thermal conditions, making the gauge suitable for sensitive inspection environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.2 mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of the combination of ceramic construction, Grade 1 accuracy and a compact 1.2 mm nominal length for a stable length reference; order the Ceramic gauge block 1.2 mm, Grade 1 DIN 861/1 directly via Metav Werkzeuge or consult our specialists for application support. Ceramic gauge block 1.2 mm, Grade 1 DIN 861/1 — Metav IndustryLine precision reference Ceramic gauge block 1.2 mm, Grade 1 DIN 861/1 is a compact, high-stability length standard intended for precision inspection and set-up tasks in calibration benches and quality-control stations. Ceramic material for dimensional stability Grade 1 tolerance to DIN 861/1 Compact 1.2 mm reference length Lightweight 0.001 kg nominal mass Stable reference material for repeatable measurements The use of ceramic as the base material gives this small gauge block exceptional thermal stability compared with many metallic standards, reducing length variation during short environmental changes. With a nominal length of 1.2 mm, the component functions as a precise reference for comparative checks and for building measurement chains where a reliable short standard is required. The compact form combined with the material choice promotes long-term dimensional integrity and wear resistance, which keeps recalibration intervals manageable and supports consistent measurement results. Accuracy and conformity that support inspection routines Specified as Grade 1 in accordance with DIN 861/1, the block provides a clearly defined tolerance band that aligns with common workshop and laboratory expectations for short reference gauges. This classification facilitates straightforward integration into existing quality procedures and documentation workflows, enabling efficient verification of micrometric instruments and comparator setups. The clearly stated nominal value of 1.2 mm simplifies traceability in records and helps technicians select the correct reference without ambiguity. Practical advantages for everyday metrology work Despite its small size, the block is deliberately designed to be handled easily and to serve as a stable stop or reference face during set-up operations. The low nominal mass (0.001 kg) makes the piece simple to manipulate and store without adding handling complexity. Its category as a precision end measure suits routine use in calibration benches, inspection fixtures and for cross-checking other short standards. The construction supports durable performance under repeated contact, reducing the frequency of replacement and contributing to predictable measurement costs. For reliable short-length references and professional advice on integration, contact Metav Werkzeuge in Emmerich — Metav IndustryLine supplies consistent precision and practical support for measurement routines Technical Data Article number: M324.001.2 GTIN: 4054469142579 Customs tariff number: 90173000 Facts Nominal length: 1.2 mm Net weight: 0.001 kg Tolerance grade: 1 Special features Material: Ceramic Specification: Grade 1 (DIN 861/1) Category: Endmasse (gauge blocks) SKU: M324.001.2 FAQ What is the nominal length and tolerance of this gauge block? The gauge block has a nominal length of 1.2 mm and is specified as Grade 1 to DIN 861/1, providing a clearly defined tolerance suitable for precision inspection tasks. Is the block suitable for use in temperature‑controlled calibration environments? Yes, the ceramic construction of the block offers improved thermal stability compared with many metal references, making it well suited for temperature‑sensitive calibration and short comparative checks. Can the block be used to check micrometers and small comparators? The compact 1.2 mm length is ideal for comparative checks on micrometers and small dial or digital comparators where a short, stable reference is required. What is the manufacturer and how is the product identified? The product is supplied under Metav IndustryLine and is identified by SKU M324.001.2 and GTIN 4054469142579. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.2 mm Gauge Block, DIN EN ISO 3650 Grade 0, Hardened Special Steel - Metav IndustryLine
Take advantage of Grade 0 accuracy and conformity with DIN EN ISO 3650 to establish a reliable length reference in inspection and calibration tasks; the hardened special steel construction ensures long-term wear resistance while the compact cross-section keeps handling simple. Order directly via Metav Werkzeuge or contact our consultants for application advice. Single gauge block 1.2 mm – Gauge block, Grade 0 (DIN EN ISO 3650) by Metav IndustryLine The single gauge block 1.2 mm is a precision length standard designed for laboratory calibration, reference stacks and workshop verification of dimensional measuring equipment. DIN EN ISO 3650, Grade 0 accuracy Hardened special steel construction Nominal size 1.20 mm for fine calibration Compact 30×9 mm cross-section for stable handling Reliable reference for calibration and inspection A Grade 0 gauge block delivers a stable, high-precision reference that supports repeatable measurement results in quality control. The compliance with DIN EN ISO 3650 signals that the manufacturing tolerances meet recognised metrological standards, making this gauge block suitable as a reference in calibration routines and comparative checks. The 1.20 mm nominal size is ideal for fine adjustments and for building precise stacks where small step sizes are required, offering a predictable incremental base for length comparisons. Durable construction that reduces uncertainty Made from hardened special steel, the block resists wear and maintains flatness under normal handling, which reduces drift in routine use and extends service life. The compact cross-section of 30×9 mm (applicable up to 10 mm nominal size) provides a low-profile yet rigid geometry that minimises bending or torsion during stacking and alignment. This construction translates directly into fewer re-measurements and more efficient inspection cycles for workshop and laboratory environments. Practical integration into metrology workflows As a single end measure, this item is intended for use both as a standalone reference and as a component of gauge block stacks for setting up micrometre, dial gauge or optical comparator references. Its light weight and compact format allow convenient placement on calibration benches and integration with comparative measuring instruments. Proper handling and storage extend performance; when combined with regular verification routines, the block supports consistent traceability within production quality systems. Clear technical identity and traceability The product’s designation and material specification provide unambiguous identification for procurement and inventory. The Grade 0 classification and adherence to DIN EN ISO 3650 simplify documentation in calibration protocols and work instructions. For businesses seeking a dependable length standard that balances precision with everyday usability, this hardened steel end measure offers a compact, robust solution. Contact Metav Werkzeuge for tailored advice on using Grade 0 gauge blocks or to source this single gauge block directly from Emmerich; our consultants provide practical guidance for integration into existing calibration processes. Technical data Article number: M319.012.0 GTIN: 4054469130545 Category: Endmasse Nominal size: 1.20 mm Weight: 0.005 kg Cross-section: up to 10 mm → 30×9 mm Tariff number: 90173000 Material: Spezialstahl, gehärtet Standard: DIN EN ISO 3650 Quality grade: 0 Label: Einzel-Endmaß 1,2 mm, DIN ISO 3650, Güte 0 DIN ISO 3650 FAQ What applications suit this gauge block? The single gauge block 1.2 mm (Metav IndustryLine, gauge block, SKU M319.012.0) is suitable for laboratory calibration, setting micrometre references and building precision stacks for workshop verification. Does the block meet recognised standards? Yes, the end measure conforms to DIN EN ISO 3650 and is manufactured to Grade 0 accuracy for use as a reference in inspection routines. What material is used and why does it matter? Made from hardened special steel, the block offers enhanced wear resistance and stable surface properties, which are essential for maintaining accuracy over repeated use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.2 mm Gauge Block, Hardened Special Steel, Grade 1, DIN EN ISO 3650 - Metav IndustryLine
High-precision Grade 1 conformity and a hardened special steel construction ensure consistent tolerance checks to DIN EN ISO 3650; combine standard-compliant accuracy and compact cross-section for efficient inspection workflows. Order the gauge directly via Metav Werkzeuge or contact our consultants for application advice. End gauge 1.2 mm — Grade 1 (DIN EN ISO 3650), hardened special steel The End gauge 1.2 mm is a precision inspection blade designed for routine acceptance and go/no-go checks in production and metrology environments, suitable for repeatable verification of small apertures and slot widths. DIN EN ISO 3650 Grade 1 accuracy Hardened special steel construction Nominal size 1.2 mm Compact cross-section 30×9 mm Reliable conformity for fast go/no-go inspection Manufactured to DIN EN ISO 3650, this inspection blade offers Grade 1 tolerances that support rapid conformity decisions on the shop floor or in the inspection bay. The nominal dimension of 1.2 mm is processed to a smooth finish and consistent profile, which reduces the need for repeated re-measurement and accelerates throughput. In practice, this means fewer hold-ups during batch release and a transparent basis for pass/fail criteria, helping maintain production rhythm and minimise downtime. Robust material and form for consistent results The core construction from hardened special steel gives the blade dimensional stability and resistance to wear during frequent engagement with mating parts. The compact 30×9 mm cross-section (applies to sizes up to 10 mm) provides a low-profile geometry that is simple to handle and less prone to bending or distortion in everyday use. These mechanical characteristics translate into repeatable measurement behaviour, reducing uncertainty introduced by handling and ensuring that the inspection tool remains a dependable reference over many cycles. Practical integration into quality procedures The design supports quick verification within established inspection routines and is easy to document in quality records. The product designation M319.012.1 and the included GTIN permit straightforward traceability in inventory and inspection logs. Using a standardised end gauge with a clearly declared norm and grade simplifies audit processes and helps fulfil quality system requirements without complex setup or calibration dialogue. For precise acceptance testing and inventory integration, contact Metav Werkzeuge to secure the M319.012.1 end gauge and request tailored procurement advice at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: M319.012.1 GTIN: 4054469130552 Standard: DIN EN ISO 3650 Nominal size: 1.2 mm Material: Special steel, hardened Grade: 1 Weight: 0.005 kg Tariff number: 90173000 Cross-section: up to 10 mm → 30×9 mm Facts Nominal dimension: 1.2 mm Weight: 0.005 kg Cross-section: 30×9 mm (for sizes ≤ 10 mm) Quality grade: 1 GTIN: 4054469130552 Special features Hardened special steel Compliant with DIN EN ISO 3650 Category: End gauge SKU: M319.012.1 FAQ What tolerance level does this gauge represent? The end gauge is specified to Grade 1 under DIN EN ISO 3650, providing a defined tolerance band for go/no-go inspection of the nominal 1.2 mm dimension. Which material is used for this inspection blade? The blade is made from hardened special steel, chosen to offer durability and stable dimensional behaviour during frequent use. How does M319.012.1 fit into routine inspection workflows? The compact cross-section and standard-compliant specification of M319.012.1 simplify routine checks and documentation, making it suitable for quick pass/fail verifications and inventory traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
ensure traceable length calibration with gauge blocks
gauge blocks, also called slip gauges or end gauges, are precision length standards designed to transfer exact measures during calibration and setup. Manufactured and graded for metrological use, they provide the reference dimensions needed to verify and adjust measuring instruments in industrial workshops and calibration labs.
how gauge blocks work and where they are essential
gauge blocks are used to create known lengths by wringing individual blocks together or by using a single block as a reference. length calibration in industry commonly relies on parallel gauge blocks, while angle, cylinder and sphere end gauges serve specialised tasks. these blocks are produced in steel, ceramic or carbide, and their material choice balances wear resistance with thermal behaviour. regular calibration—typically performed annually—by DAkkS-accredited laboratories ensures traceability. the highest-precision reference work, class K, is certified by the PTB using laser techniques; classes 0, 1 and 2 are tested under progressively less controlled conditions (class 0 in a climate-controlled lab, class 1 in a standard measurement room, class 2 in production).
measurable benefits that cut downtime and uncertainty
- consistent, traceable length standards reduce rework and measurement disputes by enabling reliable instrument calibration.
- choosing the correct material (steel, ceramic, carbide) extends service life and limits wear in high-use environments.
- selecting the right accuracy class (K, 0, 1 or 2) matches calibration effort to application needs and avoids over‑specification.
- annual calibration by accredited labs maintains documented compliance and supports quality systems such as ISO.
why Metav is a smart partner for precision standards
Metav combines specialist knowledge with a broad range of measurement technology, making the procurement of gauge blocks straightforward and dependable. with over 48,000 customers and more than 250,000 products stocked from Emmerich, Metav acts as a pragmatic quality filter for European workshops, reducing supplier complexity and ensuring consistent supply.
In short, gauge blocks deliver traceable, material‑appropriate and class‑matched references that keep calibration workflows efficient and auditable.
faq
what materials are gauge blocks available in and why does it matter?
gauge blocks are typically supplied in steel, ceramic or carbide. material choice affects wear resistance, stability and thermal expansion; selecting the right material for your environment optimises longevity and measurement stability.
how often should gauge blocks be calibrated?
industry practice is an annual calibration cycle, carried out by DAkkS-accredited laboratories, though frequency can be increased depending on usage and required uncertainty.
what do the accuracy classes k, 0, 1 and 2 indicate?
the classes denote graded tolerances and test conditions: K is the highest precision (certified by PTB with laser measurement), class 0 is checked under climate-controlled lab conditions, class 1 in a normal measurement room and class 2 in production environments.
are parallel gauge blocks always used for length calibration?
yes; for length calibration the parallel gauge blocks are the primary standard because they provide exact planar faces for wringing and stacking to create precise lengths.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com