End gauges for precise length calibration
End gauges provide exact reference lengths for calibrating measurement instruments and ensuring consistent dimensional accuracy in metalworking and inspection processes. Used in production and laboratory settings, these end gauges—made from steel, ceramic or carbide—allow technicians to compensate for wear and thermal effects and maintain measurement traceability, especially when employed alongside parallel end gauges, cylinder gauges and calibration masters. Classes 0, 1 and 2 define practical tolerance levels for workshop, inspection-room and production use respectively, delivering the repeatable precision required for machining and quality control.
1.29 mm End Gauge DIN EN ISO 3650 Grade 1 Hardened Special Steel - Metav IndustryLine
Combine DIN EN ISO 3650 accuracy with a hardened special steel construction to provide a compact, wear‑resistant reference for inspection and calibration tasks; order the gauge block directly via Metav Werkzeuge or consult the Metav team for application advice. Gauge block 1.29 mm, Grade 1 — hardened special steel, DIN EN ISO 3650 (Metav IndustryLine) the Gauge block 1.29 mm, Grade 1 is a compact precision reference intended for calibration, inspection and setting tasks in metrology and workshop environments DIN EN ISO 3650 Grade 1 Hardened special steel construction Reference length 1.29 mm Reliable reference for calibration and inspection The block is manufactured to DIN EN ISO 3650, Grade 1, which ensures defined tolerances for reference lengths and consistent repeatability during routine checks. As a certified standard‑class slip gauge, this component serves as a stable reference standard for verifying micrometres, callipers and comparator setups. The documented norm compliance reduces uncertainty in quality control processes and supports traceable measurement chains in shopfloor and laboratory workflows. Robust, wear‑resistant construction for repeatable results Made from hardened special steel, the block resists wear and maintains dimensional stability under normal handling. Its compact cross‑section of 30 x 9 mm (for blocks up to 10 mm) provides a low profile that minimises leverage and distortion during stacking or alignment. The low mass supports quick handling without compromising positional stability, making the element suitable for frequent use as a calibration master in production checks and incoming goods inspection. Practical integration into metrology routines Compact geometry and the reference length of 1.29 mm make the block suited to fine adjustment and comparison tasks where small step sizes are required. Traceability is supported by the standard designation and clear identification, simplifying documentation in inspection records. For shops that value dependable reference artefacts, this precision block is a straightforward option to harmonise measurement routines and maintain consistent quality levels across instruments. For application guidance or to discuss suitability of Metav IndustryLine reference standards, contact Metav Werkzeuge GmbH in Emmerich for personalised advice and reliable supply. Technical data Article number: M319.0129.1 GTIN: 4054469130736 Weight: 0.005 kg Material: Special steel, hardened Nominal length: 1.29 mm Standard: DIN EN ISO 3650 Grade: 1 Cross-section: up to 10 mm → 30 x 9 mm; from 10.1 mm → 35 x 9 mm Customs tariff number: 90173000 Facts Nominal dimension: 1.29 mm Weight: 0.005 kg GTIN: 4054469130736 Article number: M319.0129.1 Special features Grade 1 reference block to DIN EN ISO 3650 Hardened special steel for enhanced wear resistance Compact cross-section for stable handling Suitable as a reference standard for calibration and inspection FAQ What tolerance class does this gauge block meet? The gauge block meets DIN EN ISO 3650 requirements at Grade 1, providing a standardised tolerance class suitable for routine calibration and inspection. Is the block suitable for daily shopfloor use? Yes; the hardened special steel construction and compact 30 x 9 mm cross‑section make the block robust enough for frequent handling as a reference standard in production and inspection areas. Which instruments can be verified with this block? This 1.29 mm reference length is appropriate for checking and setting micrometres, callipers and comparator systems where small, precise reference steps are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.29 mm Gauge Block Grade 0 DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
The combination of DIN EN ISO 3650 Grade 0 conformity, a nominal size of 1.29 mm and a hardened special-steel construction delivers repeatable inspection results and long service life; order the single end gauge directly via Metav Werkzeuge or consult the Metav team for application advice. Single end gauge 1.29 mm — Grade 0, hardened special steel (Metav IndustryLine) The Single end gauge 1.29 mm is a compact, hardened inspection gauge for laboratory and workshop dimensional checks according to DIN EN ISO 3650. DIN EN ISO 3650, tolerance grade 0 Hardened special steel construction Nominal size 1.29 mm for precision checks Compact cross-section 30 x 9 mm for stability Consistent conformity that speeds up inspection cycles Manufactured to DIN EN ISO 3650, this single end gauge provides a defined reference for go/no‑go checks and dimensional verification. The designation Grade 0 indicates a tight tolerance class suitable for calibrated inspection tasks and incoming‑goods control, enabling decision‑making without repeated measuring routines. Incorporating a standardised reference like this reduces ambiguity during acceptance tests and shortens throughput times in quality control processes, as the gauge supplies a clear pass/fail criterion that is immediately actionable. Durable construction for frequent handling and long service life The body is made from hardened special steel, delivering abrasion resistance and dimensional stability under repeated handling. With a compact cross‑section of 30 x 9 mm (applicable for nominal sizes up to 10 mm) and a net weight of approximately 0.005 kg, the gauge combines low mass with sufficient stiffness for handheld inspections. The material choice and heat treatment keep wear to a minimum, which preserves the calibrated dimension and extends the interval between maintenance events—thereby lowering total operating effort over the tool’s lifetime. Easy integration into inspection workflows and traceability Marked with the article number M319.0129.0 and GTIN 4054469130729, the gauge fits directly into common inspection sets and can be referenced in test plans and inspection reports. Its compact size and standard format mean it can be employed for spot checks, comparative measurement or as a reference master in workshop fixtures. Using a standardised end gauge like this helps to harmonise quality routines across teams and sites, fostering reproducibility and faster acceptance of components during receiving and in‑process checks. Choose the Metav IndustryLine single end gauge for consistent, durable reference checks — contact Metav Werkzeuge for product matching and prompt supply from Emmerich Technical Data Article number: M319.0129.0 GTIN: 4054469130729 Material: Special steel, hardened Net weight: 0.005 kg Standard: DIN EN ISO 3650 Facts Nominal size: 1.29 mm Tolerance grade: 0 Cross-section: 30 x 9 mm (for sizes ≤ 10 mm) Tariff code: 90173000 Special features End gauge category for dimensional checks Hardened special-steel construction Compact and lightweight for handheld inspection Intended for workshop and laboratory verification FAQ What does Grade 0 mean for inspection accuracy? Grade 0 denotes a tight tolerance class under DIN EN ISO 3650; the single end gauge with Grade 0 offers a standardised reference suitable for precise go/no‑go verification and repeatable inspection decisions. Can this gauge be used for incoming goods control? Yes, the Metav IndustryLine single end gauge is designed for incoming‑goods checks and spot verification in the workshop, providing a reliable reference for acceptance tests. How should the gauge be stored to maintain accuracy? Store the gauge in a clean, dry environment and avoid impacts; regular visual checks and handling with care will preserve the hardened surface and dimensional stability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.29mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of a wear‑resistant ceramic construction and Grade 1 accuracy (DIN 861/1) for a compact, reliable length reference; order directly through Metav Werkzeuge or consult our specialists for application advice and delivery options. Ceramic gauge block 1.29 mm — Grade 1 end standard (Metav IndustryLine) The Ceramic gauge block 1.29 mm, Grade 1 (DIN 861/1) is a compact, stable length reference intended for calibration tasks, inspection jigs and precision measurement where a small, durable end standard is required. Wear-resistant ceramic material Grade 1 accuracy (DIN 861/1) Nominal length 1.29 mm Lightweight 0.002 kg Precision that reduces rework and speeds inspection This compact end standard delivers a Grade 1 reference that conforms to DIN 861/1, providing a reliable basis for dimensional checks and gauge comparisons. With a nominal length of 1.29 mm, the block is suited to fine calibration routines and spot checks on small components. The measurable benefit is a reduction in measurement uncertainty during routine inspection, which supports efficient production control and fewer rejects through consistent reference values. Material benefits for repeatable measurements Made from ceramic, the block offers inherent wear‑resistance and chemical stability that preserves its datum surfaces over many handling cycles. These material properties translate into longer intervals between reworking or replacement of small standards, so inspection setups remain dependable for longer. The lightweight construction (approx. 0.002 kg) makes handling straightforward while minimising the risk of accidental deformation associated with softer materials. Compact reference for benches and calibration benches As a clearly defined end standard, the component functions as a stable length reference for bench metrology and small-batch production control. The compact size supports easy integration into existing inspection sequences and fixturing; traceability is simplified by the product identifiers supplied with the item. Manufactured under the Metav IndustryLine umbrella, the block is intended as a pragmatic solution where a small, precise, and durable standard is required without unnecessary complexity. For specification checks or to discuss how this Grade 1 ceramic end standard fits into existing inspection routines, contact Metav Werkzeuge in Emmerich for tailored advice and delivery details. Technical data Article number: M324.001.29 GTIN: 4054469142661 Tariff number: 90173000 Material: Ceramic Nominal length: 1.29 mm Accuracy grade: 1 (DIN 861/1) Weight: 0.002 kg Core numerical data Nominal length: 1.29 mm Weight: 0.002 kg GTIN: 4054469142661 Tariff number: 90173000 Special features and classification Category: End standards (gauge block) Material property: wear‑resistant ceramic Conformance: Grade 1 per DIN 861/1 Brand: Metav IndustryLine FAQ What accuracy class does this gauge block meet? The ceramic gauge block meets Grade 1 tolerance requirements in accordance with DIN 861/1, providing a high‑precision reference for small length checks. Is the block supplied calibrated? The standard item is supplied without a specific calibration certificate; calibration services can be arranged separately if a traceable certificate is required for laboratory use. What applications suit this ceramic end standard? The block is suitable for calibration tasks, bench inspection, fixture checking and small‑component quality control where a compact, durable reference length of 1.29 mm is needed. What are the handling advantages of the material? Ceramic offers excellent resistance to wear and many chemical agents, helping to maintain stable measurement surfaces over prolonged use and frequent handling. How is the product identified for inventory and ordering? The item is listed as SKU M324.001.29 (GTIN 4054469142661) under the Metav IndustryLine range, which aids ordering and inventory control for technical departments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.3 mm End Gauge Gauge Block Grade 1, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of a DIN EN ISO 3650 Grade 1 finish, the 1.3 mm nominal size and the hardened special-steel construction for consistent reference measurements and reliable reproducibility in calibration and quality-control workflows. Order the end gauge directly via Metav Werkzeuge or ask our consultants if needed. End gauge 1.3 mm — DIN EN ISO 3650 Grade 1 precision by Metav IndustryLine End gauge 1.3 mm is a compact, hardened precision gauge intended as a stable reference for calibration tasks and dimensional verification in metrology and quality assurance environments DIN EN ISO 3650 Grade 1 accuracy Hardened special-steel construction Nominal size 1.3 mm precision Compact 5 g mass for easy handling Reduce measurement uncertainty with a graded reference A reference gauge made to DIN EN ISO 3650 and classified as Grade 1 provides a stable benchmark for dimensional checks. The 1.3 mm nominal dimension is manufactured to tight tolerances required of graded end measures, which supports repeatable verification of micrometres, callipers and production gauges. The hardened special-steel body resists wear and preserves the measuring faces over many cycles, reducing drift in routine inspection tasks. By using a standardised reference, traceable comparisons become straightforward and the inspection process gains measurable reliability — an important rational benefit for any quality manager aiming to reduce scrap and rework. Designed for ergonomic use and consistent contact conditions The small mass of the instrument (approximately 0.005 kg) and its compact cross-section permit secure manual handling and reproducible seating against mating surfaces. The specified cross-section is 30×9 mm for sizes up to 10 mm, changing to 35×9 mm above 10.1 mm, which reflects the design approach for mechanical stability across different nominal ranges. These geometric choices help to maintain consistent contact conditions, lowering operator-introduced variation during routine checks. As a practical advantage, the gauge’s dimensions and finish make it simple to use as a master in workshop fixtures or as a reference in handheld inspection, improving throughput without compromising accuracy. Practical traceability and workshop integration backed by Metav The product is supplied with clear identification (GTIN and SKU) and customs classification for straightforward inventory and procurement. Supplied by Metav IndustryLine, the gauge benefits from the vendor’s focus on accessible precision: Metav’s logistics and quality filtering in Emmerich simplify replenishment and reduce supply risk for production-critical tools. For procurement planners this means dependable availability and a supplier with a broad metrology portfolio for complementary items. The combination of normative conformity, hardened material and compact design positions the gauge as a dependable element in a coherent measuring chain, supporting both corrective and preventive quality processes. Request the Metav IndustryLine end gauge via Metav Werkzeuge for secure stock and expert advice on integrating this Grade 1 reference into existing inspection workflows Technical data Article number: M319.013.1 GTIN: 4054469130750 SKU: M319.013.1 Label: Endmaß 1,3 mm, DIN ISO 3650, Güte 1 DIN ISO 3650 Facts Nominal size: 1.3 mm Mass: 0.005 kg Tariff number: 90173000 Grade: 1 Special features Material: Spezialstahl, gehärtet Standard: DIN EN ISO 3650 Cross-section: bis 10mm 30x9mm, ab 10,1mm 35x9mm FAQ What level of accuracy does this gauge provide? The end gauge is manufactured to DIN EN ISO 3650 Grade 1, offering the precision expected of a Grade 1 end measure for reliable reference use in inspection and calibration routines. Which material is the gauge made from? This Metav IndustryLine end gauge is produced from hardened special steel, chosen to provide durable measuring faces and minimise wear during repeated contact measurements. Can this gauge be used as a workshop master for callipers? Yes — the 1.3 mm nominal size and Grade 1 conformity make the gauge suitable as a workshop master for dimensional checks on callipers and other comparative instruments. How is the gauge identified for inventory and procurement? Identification is provided via SKU M319.013.1 and GTIN 4054469130750, enabling straightforward stock management and ordering. Is the instrument suitable for mobile manual use? The compact form and low mass (approx. 0.005 kg) support stable manual handling and frequent checks, making it practical for mobile inspection tasks in the workshop. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.3 mm Gauge Block, DIN EN ISO 3650 Grade 0, Hardened Special Steel - Metav IndustryLine
Take advantage of the combination of Grade 0 accuracy, hardened special steel construction and a compact cross-section for reliable reference measurements; order the single gauge block directly via Metav Werkzeuge or ask our consultants if needed. Single gauge block 1.3 mm — Gauge block, Grade 0, DIN EN ISO 3650 (Metav IndustryLine) The single gauge block 1.3 mm delivers a traceable reference length for precision inspection and calibration in shop-floor and laboratory metrology. Grade 0 accuracy to DIN EN ISO 3650 Hardened special steel construction Compact cross-section 30 x 9 mm Repeatable reference for precision workflows The Grade 0 tolerance classification according to DIN EN ISO 3650 positions this gauge block as a high‑accuracy reference for dimensional control. With a nominal length of 1.3 mm the block is intended for use in length standards, gauge block stacks and comparative checks where reproducibility matters. The compact geometry and low mass support fast handling in routine checks while preserving flatness and contact integrity required for repeatable measurements. Robust material and stable geometry for longevity Manufactured from hardened special steel, this end gauge offers enhanced wear resistance and dimensional stability compared with untreated variants. The standard cross-section of 30 x 9 mm (applicable for nominal lengths up to 10 mm) reduces bending under manual handling and provides a dependable contact area for measurement instruments. These attributes minimise drift over time and maintain serviceability under regular calibration cycles. Practical role in measurement chains and quality assurance As a reference standard, the block integrates into comparator setups, micrometre checks and verification of callipers, helping to shorten set‑up times and improve inspection throughput. The small footprint of the block makes it suited to stacked assemblies and gauge sets, allowing precise incremental steps when assembling a calibration stack. The combination of recognised standard conformity and stable construction supports consistent results across production runs and inspection points. Contact Metav Werkzeuge for specification advice and reliable supply of Metav IndustryLine gauge blocks; Metav Werkzeuge GmbH in Emmerich provides practical sourcing and technical guidance. Technical data Article number: M319.013.0 GTIN: 4054469130743 Label: Einzel-Endmaß 1,3 mm, DIN ISO 3650, Güte 0 DIN ISO 3650 Facts Nominal length: 1.3 mm Weight: 0.005 kg Cross-section: 30 x 9 mm Special features Hardened special steel Conforms to DIN EN ISO 3650 Grade 0 tolerance Category: Gauge blocks / End gauges Tariff number: 90173000 FAQ What tolerance class does this gauge block have? The single gauge block 1.3 mm from Metav IndustryLine is specified as Grade 0 in accordance with DIN EN ISO 3650, indicating a high level of dimensional accuracy for reference use. Which material is the block made from? The gauge block is made from hardened special steel, chosen for its wear resistance and dimensional stability under repeated contact. For which measuring tasks is this block intended? This end gauge is suitable for establishing reference lengths in stacks, checking micrometres and verifying calipers where compact, accurate steps of 1.3 mm are required. What cross-section applies to this nominal length? For nominal lengths up to 10 mm the applicable cross-section is 30 x 9 mm, which provides a stable contact area and good handling characteristics. Can this block be included in a gauge block set? Yes; the 1.3 mm block is designed for use within gauge block stacks and as an individual reference element in calibration and inspection chains. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.31 mm Gauge Block Single End, Hardened Special Steel, DIN EN ISO 3650 Grade 0 - Metav IndustryLine
Take advantage of a precise workshop reference that combines DIN EN ISO 3650 conformity with a compact 1.31 mm nominal size for reliable setting and verification tasks; order directly through Metav Werkzeuge or consult our specialists for application advice. Single gauge block 1.31 mm — Grade 0, DIN EN ISO 3650 (Metav IndustryLine) The Single gauge block 1.31 mm is a compact, traceable reference for dimensional calibration and precise setting tasks in machine shops and inspection benches. Grade 0 tolerance according to DIN EN ISO 3650 Hardened special steel construction Compact nominal size of 1.31 mm Suitable for workshop calibration and setting tasks Dependable accuracy for reproducible results The block delivers a traceable reference intended to reduce measurement uncertainty in routine calibration and setup work. Manufactured to DIN EN ISO 3650 and classified as Grade 0, this reference provides a defined geometric size that supports repeatable checks of gauges, micrometres and feeler systems. The nominal value of 1.31 mm is produced with tight geometry control, which means fewer adjustments are required during process setup and quicker verification cycles on the shop floor. Robust material for long-term stability Made from hardened special steel, the reference combines wear resistance with stable thermal behaviour for everyday use. The hardened surface resists abrasion from repeated wringing and contact with other standards, maintaining the nominal dimension over long service periods. Where occasional handling and transport occur, the compact cross-section (30 x 9 mm for sizes ≤10 mm) keeps deformation risk low and handling straightforward while preserving the block’s dimensional integrity. Practical integration into workshop metrology The compact format is designed for fast incorporation into existing inspection workflows. As a single-piece reference it supports direct comparisons, stack building and quick checks of measuring instruments without extensive fixture work. The measured value is ideal for setting small gaps and verifying instrument zero points, enabling clear pass/fail decisions and reducing downtime associated with recalibration or rework. Trust in supply and documentation Sourced under the Metav IndustryLine label, this reference benefits from Metav’s role as a European quality gateway and logistics partner. The component arrives as a finished reference item with clear identification (SKU M319.0131.0) and traceable data suitable for workshop record-keeping. Relying on established supply channels reduces procurement complexity and supports consistent availability for production and quality teams. For application-specific advice or to secure a dependable Grade 0 reference from Metav IndustryLine, contact Metav Werkzeuge for tailored recommendations and order processing. Technical Data SKU: M319.0131.0 Nominal size: 1.31 mm Standard: DIN EN ISO 3650 Grade: 0 Material: hardened special steel GTIN: 4054469130767 Facts Weight: 0.005 kg Cross-section (≤10 mm): 30 x 9 mm Tariff number: 90173000 Special features Compact single block format Designed for wringing and stacking Workshop and inspection bench suitability Category: Gauge blocks / end measures FAQ What accuracy class does this gauge block meet? The block is supplied as Grade 0 according to DIN EN ISO 3650, providing a high-precision reference for routine calibration tasks. Which material is used for the gauge block? The block is manufactured from hardened special steel, chosen for durability and stable dimensional behaviour in workshop conditions. Is the nominal size suitable for small-gap settings? Yes, the 1.31 mm nominal size is compact and well suited for small-gap setting, zero checks and stack-building in inspection routines. How is the block identified for inventory and traceability? Identification is provided via SKU M319.0131.0 and GTIN 4054469130767, enabling straightforward documentation in quality records. Can this block be used for building gauge stacks? The single block format is intended for wringing and stack construction, supporting modular build-up of reference sizes for more complex checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.31 mm Gauge Block, Hardened Special Steel, DIN EN ISO 3650 Grade 1 - Metav IndustryLine
Take advantage of reliable, Grade 1 accuracy and hardened special steel construction for reproducible small‑dimension checks; order directly through Metav Werkzeuge or consult our specialists for application advice. End gauge 1.31 mm (DIN EN ISO 3650) — Metav IndustryLine hardened special steel The End gauge 1.31 mm is a precision inspection measure for laboratory and workshop gauging tasks, designed to provide traceable dimensional reference in accordance with international standards. DIN EN ISO 3650 Grade 1 precision Hardened special steel for long service life Nominal size 1.31 mm for fine gauging tasks Compact and lightweight at approximately 6 g Guaranteed metrological performance for inspection workflows This precision end measure conforms to DIN EN ISO 3650 and is manufactured to Grade 1 tolerances, making it suitable for acceptance testing and routine inspection where small nominal sizes must be verified reliably. The defined tolerance class ensures that measurement uncertainty is minimised during gauge comparisons and pass/fail checks, supporting faster decision making on the shop floor. By specifying a standardised reference such as DIN EN ISO 3650, the gauge integrates directly into quality procedures and documentation, reducing administrative friction and supporting compliance during audits. Durable construction that preserves accuracy over time Made from special steel, hardened, the gauge resists wear and retains its calibrated dimensions through repeated handling. The compact cross‑section (up to 10 mm: 30 × 9 mm; from 10.1 mm: 35 × 9 mm) balances stiffness and ergonomics, so the small device remains stable in the hand while limiting thermal and mechanical distortion during comparative measurements. The low mass (≈ 0.006 kg) simplifies handling and storage, while the robust material choice reduces the frequency of rework or replacement—contributing to lower lifecycle costs and dependable inspection throughput. Practical identification and workshop integration The article is provided under SKU M319.0131.1 and bears GTIN 4054469130774, facilitating inventory control and traceability in procurement and calibration records. The nominal size 1.31 mm makes this end gauge particularly useful for fine mechanical checks, setting standards for micromachined parts, and verifying small bores or shim thicknesses where repeatable reference dimensions are required. As a compact, standardised reference, it complements gauge sets and inspection benches and simplifies comparative checks without the need for complex measuring fixtures. For traceable Grade 1 inspection tools from Metav IndustryLine — contact Metav Werkzeuge for order and application support at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M319.0131.1 GTIN: 4054469130774 Label: Endmaß 1,31 mm, DIN ISO 3650, Güte 1 DIN ISO 3650 Specifications Nominal size: 1.31 mm Weight: 0.006 kg Cross-section: up to 10 mm — 30 x 9 mm; from 10.1 mm — 35 x 9 mm Grade: 1 Tariff code: 90173000 Materials & features Material: Spezialstahl, gehärtet (special steel, hardened) Standard: DIN EN ISO 3650 Category: End gauges SKU: M319.0131.1 FAQ What accuracy class does this gauge meet? The end gauge is manufactured to Grade 1 tolerances in accordance with DIN EN ISO 3650, providing a defined level of accuracy for inspection tasks. Is the gauge suitable for repeated workshop use? Yes — the piece is made from hardened special steel, which offers wear resistance and preserves dimensional stability under regular handling. How is the product identified for inventory and traceability? Identification is via SKU M319.0131.1 and GTIN 4054469130774, which support procurement, stock management and calibration records. Can this gauge be used for small bore or shim verification? The nominal size 1.31 mm and compact cross‑section make the gauge well suited to fine gauging tasks such as shim checks and small bore comparative measurements. What documentation accompanies the gauge? The product is supplied as a calibrated inspection reference per its standard; full traceability details are included in delivery documentation where applicable. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.31mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
The combination of Grade 1 accuracy (DIN 861/1) and a ceramic construction delivers a stable, reproducible reference for length checks and calibration tasks. Order the item directly via Metav Werkzeuge or consult their specialists for advice on integrating it into inspection workflows. Ceramic gauge block 1.31 mm – Grade 1 (DIN 861/1) by Metav IndustryLine The Ceramic gauge block 1.31 mm is a precision reference for length calibration and quality control in metrology and inspection environments. Grade 1 accuracy (DIN 861/1) Ceramic for low thermal expansion Compact nominal size 1.31 mm GTIN-marked for traceability Reliable reference for routine calibration and checks A Grade 1 gauge block certified to DIN 861/1 provides a dependable length standard for workshop and laboratory use. The specified 1.31 mm nominal dimension serves as a reproducible reference for comparative measurements and verification routines, helping to maintain process stability in production and inspection. The conformity with an established DIN class supports traceable procedures and harmonises with standard calibration protocols used in industry. Material choice that reduces measurement variability The ceramic composition offers dimensional stability across small temperature shifts and resists typical wear mechanisms encountered in repetitive stacking and handling. This material choice reduces the influence of ambient variations on short-length references, improving repeatability during routine checks. The compact construction and low mass make handling straightforward while preserving the integrity of the reference surface for consistent contact with measuring instruments. Easy integration into quality systems and inventory Marked with an identifiable GTIN and supplied as a discrete article (SKU M324.001.31), the gauge block fits into established inspection sets and inventory management. Its light weight and compact form factor simplify storage and the assembly of reference stacks for comparative work. Metav IndustryLine’s positioning as a precision partner supports procurement and ongoing supply reliability, making the block a practical choice for trades, workshops and calibration benches seeking robust, repeatable short-length standards. Contact Metav Werkzeuge for availability and expert guidance on Metav IndustryLine ceramic gauge blocks at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M324.001.31 GTIN: 4054469142685 Material: Ceramic Nominal size: 1.31 mm Grade: 1 (DIN 861/1) Category: Gauge blocks (Endmasse) Numbers / Core technical data Nominal size: 1.31 mm Weight: 0.002 kg Tariff number: 90173000 ECLASS: 21170108 Special features DIN 861/1 Grade 1 Ceramic material SKU: M324.001.31 Category path: Messgeräte > Endmasse FAQ What tolerance standard does this gauge block meet? The gauge block meets Grade 1 requirements according to DIN 861/1, providing a standardised class for short-length reference pieces. Is the ceramic gauge block suitable for laboratory reference stacks? Yes, the Metav IndustryLine ceramic gauge block is intended as a stable short-length reference and can be combined with other blocks for traceable comparative measurements. What advantages does the ceramic material offer for a gauge block? Ceramic reduces thermal expansion and shows good surface stability, which helps to maintain repeatable contact conditions and prolong reference life for short-length standards. Which identifiers aid traceability for this article? Traceability is supported by the SKU M324.001.31 and GTIN 4054469142685, which simplify inventory control and documentation for quality systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.32 mm Gauge Block Grade 1, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
A compact reference for exact length checks: 1.32 mm nominal length, hardened special steel and conformity to DIN EN ISO 3650 Grade 1 ensure reproducible measurements in workshop and calibration environments. Order the gauge block directly via Metav Werkzeuge or consult the Metav team for procurement and set-up advice. Gauge block 1.32 mm (DIN EN ISO 3650, Grade 1) – Metav IndustryLine The Gauge block 1.32 mm (DIN EN ISO 3650, Grade 1) is a precision reference block for calibration, master sets and high‑accuracy length comparisons in industrial quality control and toolmaking. DIN EN ISO 3650 Grade 1 accuracy Hardened special steel for long life Exact nominal length 1.32 mm Compact cross-section 30 x 9 mm Lightweight at approximately 0.006 kg Consistent reference accuracy for production control The small reference block provides a stable and repeatable 1.32 mm length standard compliant with DIN EN ISO 3650. Manufactured from hardened special steel, the component resists deformation and abrasion, which maintains measurement certainty over repeated use. As a Grade 1 reference, it offers a high level of geometric fidelity suitable for precision toolmaking and quality assurance tasks where a reliable master standard helps reduce measurement-related downtime and rework. Small form factor, big practical advantages With a compact cross-section of 30 x 9 mm for sizes up to 10 mm and a weight of around 0.006 kg, the block is easy to handle and integrate into existing master sets or comparator fixtures. The design minimises handling-induced errors and supports quick set-up and transfer measurements. In practice, this compact form improves throughput by simplifying the comparison and inspection of small parts without sacrificing robustness or repeatability. Built to integrate into traceable measurement chains Intended for use as a reference in calibration labs and production metrology, the block works well within master sets and as a control artefact for routine checks. Its Grade 1 specification makes it a suitable component for establishing traceable measurement chains and for use in combined inspection routines where stability and interchangeability of reference lengths are required. The product’s clear specification and standard conformity facilitate documentation and quality records in regulated manufacturing environments. Select the Metav IndustryLine gauge block for dependable reference measurements and contact Metav Werkzeuge for supply and expert advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M319.0132.1 GTIN: 4054469130798 Norm: DIN EN ISO 3650 Material: Special steel, hardened Nominal length: 1.32 mm Grade: 1 Category: Gauge blocks (End gauges) Key figures Nominal length: 1.32 mm Weight: 0.006 kg Cross-section (≤10 mm sizes): 30 x 9 mm Tariff number: 90173000 Special features Hardened special steel for wear resistance Conforms to DIN EN ISO 3650 Grade 1 Compact, stable rectangular geometry Suited for master sets and length comparison FAQ What tolerance class does this gauge block meet? The gauge block meets DIN EN ISO 3650 Grade 1, providing high geometric accuracy suitable for precision workshop and calibration applications. Which material is used for the block and what is the benefit? Made from hardened special steel, the block offers enhanced wear resistance and long‑term dimensional stability for repeated use in measurement routines. Is the block suitable for inclusion in a master set? Yes, the block is designed for integration into master sets and comparison chains; the compact 30 x 9 mm cross-section supports close stacking and reliable referencing. What is the article number and how can it be specified in orders? The article number is M319.0132.1; referencing this SKU simplifies procurement and ensures the exact nominal length of 1.32 mm is supplied. For which applications is a Grade 1 gauge block appropriate? Grade 1 is appropriate for precision toolmaking, quality control labs and industrial inspection tasks where high repeatability and traceable reference lengths are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.32 mm Gauge Block Single End Size, Hardened Special Steel, DIN EN ISO 3650 Grade 0 - Metav IndustryLine
Take advantage of a compact, grade‑0 reference gauge that delivers reproducible results in inspection and calibration setups, combining DIN EN ISO 3650 conformity with a hardened special‑steel design for prolonged service life; order directly via Metav Werkzeuge or consult our technical advisors for application guidance. M319.0132.0 — End gauge, 1.32 mm, DIN EN ISO 3650 Grade 0 (Metav IndustryLine) The M319.0132.0 is a precision end gauge intended as a reference standard for dimensional inspection and verification tasks in metrology laboratories and production quality control. DIN EN ISO 3650 Grade 0 accuracy Hardened special steel construction Nominal size 1.32 mm, compact format Cross-section 30×9 mm for small gauges Reliable reference for small‑component inspection The gauge is manufactured to DIN EN ISO 3650 and rated Grade 0, making it suitable where a narrow tolerance band is required for reference measurements. With a nominal dimension of 1.32 mm, the device serves as a stable benchmark for bench comparators, gauge blocks sets and routine verification of micromachined parts. The standardised tolerance class supports repeatable decisions in incoming inspection and in‑process checks, reducing measurement uncertainty and the need for rework while improving throughput. Durable construction for consistent results Made from hardened special steel, the gauge resists wear and offers good dimensional stability under normal workshop conditions. The material choice minimises surface degradation and helps maintain the reference dimension over prolonged use, so fewer replacements are required and instrument downtime is reduced. The compact cross‑section of 30×9 mm (typical for gauges up to 10 mm nominal size) provides a rigid profile that is easy to handle and stack without distortion, contributing to consistent measurement outcomes and a longer service life. Practical handling and application benefits Lightweight at approximately 0.006 kg, the instrument is convenient for laboratory workflows and quick inspection routines. As a precision end gauge it is designed for use as a fixed reference in comparative checks and calibration chains; when used alongside calibrated standards it supports traceable measurement systems. The robust finish simplifies cleaning and integration into existing gauge sets, while the Metav IndustryLine designation signals controlled production and batch documentation for procurement and inventory planning. Secure the M319.0132.0 from Metav IndustryLine through Metav Werkzeuge for reliable reference measurements — Metav Werkzeuge in Emmerich can advise on application suitability and supply (info@metav-werkzeuge.com | +49 2822 7131930) Technical data Article number: M319.0132.0 GTIN: 4054469130781 Manufacturer: Metav IndustryLine Facts Nominal size: 1.32 mm Weight: 0.006 kg Customs tariff number: 90173000 Cross-section: 30×9 mm (applies to nominal sizes ≤ 10 mm) Special features Material: special steel, hardened Standard: DIN EN ISO 3650 Tolerance class: Grade 0 Category: End gauges FAQ What does Grade 0 mean for this end gauge? Grade 0 according to DIN EN ISO 3650 denotes a narrow tolerance band appropriate for high‑precision reference applications; the M319.0132.0 meets this classification for repeatable inspection results. Is the gauge suitable for daily shop‑floor use? The hardened special‑steel construction and compact cross‑section make the M319.0132.0 well suited to routine inspection tasks where small, stable reference standards are required. Can the gauge be used with gauge block sets and comparators? Yes. The dimensional stability and standardised nominal size make this end gauge compatible with comparator setups and as a complementary reference within gauge block stacks. Is a calibration certificate supplied with the product? The product data does not specify a supplied calibration certificate; the calibration status is not stated in the available information. What handling precautions are recommended for long‑term accuracy? Avoid mechanical shocks, store the gauge dry and clean, and handle with protective gloves or paper to prevent corrosion and surface contamination that can affect measurement integrity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.32mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of a compact, stable reference that combines ceramic construction with Grade 1 accuracy (DIN 861/1) for repeatable inspection routines; the nominal size of 1.32 mm makes it ideal for fine-gap calibration and reference stacks. Order the block directly via Metav Werkzeuge or request advice from our consultants for integration into measurement chains. Metav IndustryLine Ceramic Gauge Block 1.32 mm, Grade 1 (DIN 861/1) The Metav IndustryLine ceramic gauge block provides a small, stable reference element for precision tooling, inspection and laboratory use where a compact nominal size and grade-certified accuracy are required. Grade 1 accuracy (DIN 861/1) Precision 1.32 mm nominal size Made from ceramic for dimensional stability Lightweight: 0.002 kg Consistent reference for precision setups As a Grade 1 reference element to DIN 861/1, this ceramic gauge block delivers a reliable baseline for comparative measurements and stack calibration. The ceramic composition offers dimensional stability and resistance to surface wear, which supports repeatable results across routine checks. Incorporating such a compact reference reduces setup time when assembling gauge stacks or verifying gap settings on small assemblies, improving throughput without compromising measurement integrity. Low-mass handling with high measurement utility The block’s 1.32 mm nominal dimension and mass of 0.002 kg make it particularly suited to fine‑mechanics and toolroom environments where small increments must be referenced precisely. Its small footprint simplifies integration into existing gauge block sets and minimises the chance of overloading delicate fixturing. The durable ceramic surface maintains flatness under normal handling, providing a stable contact plane for interferometry or tactile comparison. Clear traceability and inventory integration Identification data such as SKU M324.001.32 and GTIN 4054469142692 permit straightforward stock management and traceability within quality systems. The compact nature of the block makes it practical for controlled storage in dedicated trays or reference cabinets, supporting orderly calibration cycles and audit readiness. When used as part of a calibrated reference set, it aids consistent in‑process verification and spot checks on production lines. Practical benefits for workshop and laboratory workflows Using a ceramic reference element of this grade simplifies recurring measurement tasks by offering a stable, wear‑resistant standard that fits seamlessly into existing gauge stacks or comparator arrangements. The combination of Grade 1 specification, ceramic material, and compact nominal size reduces error sources linked to thermal and mechanical instability and thereby supports more efficient decision-making in inspection and setup processes. Secure supply of the Metav IndustryLine ceramic gauge block is available through Metav Werkzeuge — contact our Emmerich team for purchasing and technical clarifications at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M324.001.32 GTIN: 4054469142692 Tariff code: 90173000 Weight: 0.002 kg Material: Ceramic Nominal size: 1.32 mm Grade: 1 (DIN 861/1) Facts Category: Gauge block Manufacturer brand: Metav IndustryLine SKU: M324.001.32 Mass (g): 2 Special features Compact reference element for fine measurements Ceramic construction for dimensional stability Suitable for stack assembly and small-gap calibration Intended for inspection, toolroom and laboratory use FAQ What accuracy class does this gauge block meet? The Metav IndustryLine ceramic gauge block is supplied as Grade 1 in accordance with DIN 861/1, providing a defined accuracy class for workshop and laboratory reference use. What is the nominal size and how is it used in stacks? The nominal size is 1.32 mm; the block is intended for inclusion in gauge block stacks or as an individual reference for setting small gaps and verifying fine tolerances. Which material is the block made from and what are the advantages? This reference is made from ceramic, chosen for its dimensional stability and surface durability, making it suitable for repeated contact in routine inspection tasks. Is the product suitable for calibration reference applications? Yes — the ceramic block’s Grade 1 classification and stable geometry make it suitable as a calibration reference within established measurement chains and verification procedures. How is the item identified for inventory and traceability? Identification is provided via SKU M324.001.32 and GTIN 4054469142692, facilitating straightforward integration into inventory and quality management systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.33 mm Gauge Block Single End, Hardened Special Steel, DIN EN ISO 3650 Grade 0 - Metav IndustryLine
Take advantage of the combination of DIN EN ISO 3650 Grade 0 manufacturing, hardened special steel, and compact dimensions to secure a reliable length reference for precision workshops and inspection benches. Order the gauge block directly via Metav Werkzeuge or ask the consultants for application advice. Single gauge block 1.33 mm, Grade 0 — Metav IndustryLine (hardened special steel) The Single gauge block 1.33 mm is a precision length standard designed for calibration, setting and verification tasks in metrology benches and production quality control. Grade 0 accuracy to DIN EN ISO 3650 Hardened special steel for wear resistance Compact 1.33 mm nominal size, 30 × 9 mm cross-section Precision reference for dimensional control The gauge serves as a stable length reference for setting micrometres, comparators and measuring stands. Manufactured to DIN EN ISO 3650 and produced to Grade 0, this block offers the narrow tolerances and surface quality required for repeatable stacks and wringing behaviour. The nominal 1.33 mm dimension and the compact cross-section make it especially suitable where small step heights or fine adjustments are needed, while the hardened construction reduces wear during repeated use. Practical handling and compatibility with test equipment With a small mass of 0.006 kg and a cross-section designed for handling, the block balances ease of use with mechanical stability. The solid special steel, hardened construction ensures resistance to deformation and good surface finish for wringing; this supports fast, secure stacks without specialised fixtures. Use as a single reference or combine with other blocks to build up complex reference lengths for tooling set-up and comparative measurement tasks. Reliability in workshop and laboratory environments The block’s Grade 0 designation signals suitability for precision workshop and inspection use where reliable dimensional references are required. Its compact form factor fits comfortably in inspection trays and measuring jigs, while the robust material extends service life under regular use. Metav’s quality filtering in Emmerich underpins consistent manufacturing standards, providing an accessible option for small workshops as well as industrial measurement departments. Choose Metav IndustryLine for dependable reference standards — contact Metav Werkzeuge in Emmerich for tailored advice and supply. Technical data Article number: M319.0133.0 GTIN: 4054469130804 Standard: DIN EN ISO 3650 Grade: 0 Dimensions & facts Nominal size: 1.33 mm Cross-section: up to 10 mm → 30 × 9 mm; from 10.1 mm → 35 × 9 mm Weight: 0.006 kg Tariff number: 90173000 Special features Material: Special steel, hardened Category: Gauge blocks / Endmasse Application: Precision length reference for calibration and setting FAQ What does Grade 0 mean for this gauge block? Grade 0 indicates manufacturing to tight tolerances and surface quality as defined in DIN EN ISO 3650; the Single gauge block 1.33 mm (Metav IndustryLine, M319.0133.0) is produced for precise and repeatable length referencing. Can this block be used for wringing and stacking? Yes — the hardened special steel finish and the specified cross-section support good wringing behaviour and secure stacking for building reference lengths. Is the block suitable for workshop use or only for calibration laboratories? The block is appropriate for both precision workshops and inspection benches; its Grade 0 quality offers a reliable reference for setting and verification tasks in production environments. How should the gauge block be stored to maintain accuracy? Store the block clean and dry in a protective tray or box, avoiding corrosive atmospheres and large temperature swings to preserve surface condition and dimensional stability. What applications are typical for a 1.33 mm nominal size block? Typical uses include setting small offsets, checking depth gauges, establishing comparator references and building small stacks for fine adjustment tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.33 mm Gauge Block, DIN EN ISO 3650 Grade 1, Hardened Special Steel - Metav IndustryLine
Take advantage of precise, DIN‑compliant measuring standards combined with robust, hardened‑steel construction for reliable reference measurements; order the part directly from Metav Werkzeuge or consult our specialists for integration advice. Gauge block 1.33 mm — Grade 1, DIN EN ISO 3650 (Metav IndustryLine) A compact precision gauge block for laboratory and workshop reference measurements, suitable for high‑accuracy setting and calibration tasks Precision gauge block 1.33 mm Grade 1 Conforms to DIN EN ISO 3650 standards Hardened special-steel construction Lightweight nominal mass 0.006 kg Precision where reproducibility matters The gauge block is manufactured to deliver a stable reference at 1.33 mm nominal size, supporting consistent set‑ups and comparative measurements. Conformity with DIN EN ISO 3650 ensures that the component meets a recognised industry standard, which simplifies traceability in quality workflows and reduces uncertainty in gauge stacking and comparator work. The Grade 1 specification denotes a level of dimensional accuracy suitable for fine workshop calibration and metrology tasks, enabling efficient process control and fewer verification cycles. Robust design for repeated handling and stacking Constructed from hardened steel, the block resists wear during regular use and maintains its geometry under mechanical contact, which benefits repeatability in daily checks. Its low mass (approx. 0.006 kg) and compact form factor make handling straightforward while the specified cross‑section dimensions provide stability when used in stacks or with holders. These design choices reduce setup time and support uninterrupted production checks, so measurement routines remain fast and reliable without sacrificing precision. Practical use in calibration and inspection routines Ideal for integration into calibration benches, comparator set‑ups and slip‑gauge stacks, the block serves as a reference for length standards and tool offsets. It is well suited to both shopfloor verification and laboratory comparison tasks where a DIN‑listed standard is required. The clear specification and market‑grade materials make the product an efficient choice for teams seeking measurable improvements in process control and documentation quality. For application guidance or to secure the Metav IndustryLine gauge block M319.0133.1 for your calibration set, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored support and delivery options Technical data Article number: M319.0133.1 GTIN: 4054469130811 Label: Endmaß 1,33 mm, DIN ISO 3650, Güte 1 DIN ISO 3650 Facts Nominal size: 1.33 mm Weight: 0.006 kg Grade: 1 Tariff number: 90173000 Special features Material: Special steel, hardened Norm: DIN EN ISO 3650 Cross-section: up to 10 mm: 30 x 9 mm; from 10.1 mm: 35 x 9 mm Category: Gauge blocks FAQ What tolerance class does this gauge block meet? The gauge block meets Grade 1 tolerance according to DIN EN ISO 3650, making it suitable for precise workshop and laboratory reference measurements. Is the material suitable for long-term use in a calibration set? Yes. The block is made from hardened special steel, selected to resist wear and maintain dimensional stability during repeated stacking and handling. Can this gauge block be used in comparator setups and slip‑gauge stacks? The design and 1.33 mm nominal size of the block make it compatible with standard comparator set‑ups and slip‑gauge stacks for fine length calibration tasks. What is the article number for ordering or referencing in documentation? The article number for this item is M319.0133.1, which should be used for ordering and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.33mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of the ceramic construction, Grade 1 accuracy (DIN 861/1) and compact nominal size to secure a stable reference standard for routine calibration and shop‑floor checks; order the gauge block directly via Metav Werkzeuge or consult our specialists for application advice. Ceramic gauge block 1.33 mm, Grade 1 (DIN 861/1) — Metav IndustryLine The Ceramic gauge block 1.33 mm, Grade 1 (DIN 861/1) is a small, high‑stability reference element intended for dimensional calibration, comparator setups and precise stepping in metrology and quality control environments Thermally stable ceramic construction Grade 1 accuracy (DIN 861/1) Nominal size 1.33 mm, lightweight 2 g Reliable reference for repeatable measurements A Grade 1 ceramic block provides a compact, high‑precision reference that supports reproducible measurements in production and laboratory settings. With its 1.33 mm nominal dimension and tight manufacturing control under DIN 861/1, the block acts as a trustworthy standard when setting micrometres, checking gauge interfaces or verifying comparator heads. The ceramic substrate contributes to dimensional integrity, so the reference value remains consistent across repeated use. Stable results through reduced thermal influence Ceramic materials are chosen for their low coefficient of thermal expansion and thermal stability, reducing drift when temperature control is limited on the workshop floor. Compared with traditional steel references, the insulating nature of the material helps to maintain a steady measurement baseline during short exposure to ambient changes. The wear resistance of the ceramic surface also supports long service life, keeping contact faces intact and preserving measurement repeatability over many cycles. Compact size with practical handling and storage At only 2 g, the block is exceptionally lightweight and easy to integrate into inspection routines and set‑ups without adding mass that could affect fragile fixtures. Its compact footprint simplifies storage in dedicated trays or protective cases and allows fast insertion into gauge nests or between reference faces. The small form factor is especially useful where space is limited yet a traceable reference is required for frequent checks. Suited to metrology labs and routine quality assurance Designed to meet industrial needs, the block suits calibration benches, maintenance workshops and production quality stations that require a reliable, serviceable standard. Conformity to DIN 861/1 makes it appropriate for standardised procedures and documentation chains, while the robust ceramic body reduces the risk of magnetic interference and surface deformation during normal handling. The combination of precision and durability supports smoother production flow and lowers the frequency of replacements. For stable reference measurements choose the Metav IndustryLine ceramic gauge block and contact Metav Werkzeuge in Emmerich for tailored advice and supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M324.001.33 GTIN: 4054469142708 Customs tariff number: 90173000 Facts Nominal size: 1.33 mm Weight: 0.002 kg Tolerance grade: 1 Special features Material: Ceramic Standard: DIN 861/1 Category: Gauge block / end gauge Brand: Metav IndustryLine FAQ What material is the block made from? The block is manufactured from ceramic; the ceramic construction of the Ceramic gauge block 1.33 mm, Grade 1 (DIN 861/1) ensures low thermal expansion and good wear properties. Is this block suitable as a calibration standard? Yes, the Grade 1 classification under DIN 861/1 makes the block appropriate for routine calibration tasks and reference checks in quality control operations using the Metav IndustryLine gauge block M324.001.33. How should the block be stored when not in use? Store the block in a clean, dry environment and keep it in a protective tray or case to avoid surface contamination; this preserves the reference value of the Ceramic gauge block 1.33 mm, Grade 1 (DIN 861/1). Does the ceramic block affect magnetic instruments? No, the ceramic material is non‑magnetic, which helps avoid interference with magnetic measuring devices when using the M324.001.33 reference. Which industries benefit most from this gauge block? Precision engineering, metrology laboratories and production quality assurance teams benefit from the stability and durability of this ceramic reference block, particularly where compact, high‑accuracy checks are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.34 mm Gauge Block Grade 1, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
The combination of DIN EN ISO 3650 conformity, Grade 1 accuracy and a hardened special steel construction ensures a stable reference for routine acceptance checks and precision inspections; order this master gauge directly via Metav Werkzeuge or consult our specialists for integration advice. End gauge 1.34 mm — Grade 1, DIN EN ISO 3650, Metav IndustryLine The End gauge 1.34 mm (Grade 1) is a precision master limit used for reliable inspection of small bores and gauge interfaces in workshop and laboratory settings. Grade 1 accuracy to DIN EN ISO 3650 Hardened special steel for long-term stability Compact cross-section 30×9 / 35×9 mm Reliable reference for pass/fail inspection As a calibrated master limit, this end gauge serves as a reference standard for quick go/no‑go verification and routine quality control. Conformity with DIN EN ISO 3650 signals that the geometry and dimensional stability meet recognised metrology criteria, which simplifies acceptance testing and reduces uncertainty during inspection. The clear normative basis supports consistent decision-making in production control and incoming inspection, improving throughput by cutting time spent on ambiguous measurements. Robust materials reduce wear and rework Manufactured from hardened special steel, the gauge resists wear under repeated contact, maintaining form and function across many inspection cycles. The specified compact cross-section (30×9 mm for up to 10 mm diameters; 35×9 mm above 10.1 mm) optimises stiffness where it matters, so the master stays true to its nominal dimension. This construction lowers the frequency of re-measurement and replacement, delivering an economical, durable inspection tool that preserves measurement integrity in busy workshop environments. Practical application and traceable identification Designed for straightforward use in production lines and toolrooms, the gauge provides an immediate tactile check for mating parts and fixtures. Its nominal size of 1.34 mm is suitable for small-diameter checks where a precise limit is required. The compact mass and balanced geometry make handling safe and repeatable. Inclusion of product identifiers such as SKU and GTIN assist traceability in inventory systems and quality documentation, supporting audit trails and conformity records in regulated manufacturing processes. Contact Metav Werkzeuge to request this Metav IndustryLine Grade 1 end gauge or to arrange technical consultation for integrating it into existing inspection routines. Technical Data Article number: M319.0134.1 GTIN: 4054469130835 SKU: M319.0134.1 Norm: DIN EN ISO 3650 Facts Nominal dimension: 1.34 mm Weight: 0.006 kg Tariff number: 90173000 Special features Material: hardened special steel Tolerance class: Grade 1 Cross-section: 30×9 mm (≤10 mm); 35×9 mm (>10.1 mm) Category: End gauges FAQ What is the intended use of this end gauge? The end gauge is intended as a master limit for quick go/no‑go inspections of small bores and gauge fittings; the Metav IndustryLine end gauge M319.0134.1 is suited to routine workshop and laboratory checks. How does Grade 1 classification affect measurement decisions? Grade 1 indicates a high level of geometric accuracy under DIN EN ISO 3650, so the gauge provides a reliable criterion for accept/reject decisions in standard production and inspection workflows. What material is the gauge made from and why does it matter? The gauge is made from hardened special steel, which ensures wear resistance and long service life, helping to keep inspection results consistent over repeated use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.34mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of the combination of Grade 1 accuracy, a thermally stable ceramic construction and compact handling for reliable reference measurements — order the gauge block directly via Metav Werkzeuge or consult our specialists for application advice. Ceramic gauge block 1.34 mm — Grade 1 reference end measure, Metav IndustryLine Ceramic gauge block 1.34 mm provides a compact, high-stability reference for precision calibration and dimensional control in inspection, toolroom and metrology environments. Grade 1 accuracy to DIN 861/1 Stable ceramic material, corrosion-resistant Ideal for calibration and reference measurements Precision that supports reproducible inspection results Manufactured to Grade 1 (DIN 861/1) tolerances, this ceramic end measure delivers a dependable reference point for comparative inspection and calibration tasks. The narrow nominal size of 1.34 mm suits fine tolerance checks and small-component verification; the high stiffness of the material reduces deformation during measurement, resulting in consistent readings. This performance-oriented specification supports throughput in quality control workflows and lowers rework risk through repeatable dimensional checks. Material advantages for long-term stability and wear resistance The ceramic construction provides low thermal expansion and high hardness compared with many metallic gauges, which translates into better dimensional stability over time and in variable workshop conditions. Ceramic surfaces resist corrosion and retain surface finish under frequent use, so the reference dimension remains trustworthy across repeated comparisons. The compact geometry also minimises handling error during set-up and is therefore well suited to precision bench or microscope-assisted inspection. Practical use, traceability and workshop integration As a compact reference gauge, this end measure is intended for routine verification, setting small tools or as part of a gauge set for laboratory and shop-floor environments. Its low mass and small form factor make it easy to position and clamp for comparative checks. For traceable processes, note the supplied product identifiers (SKU M324.001.34, GTIN 4054469142715) and the manufacturing origin listed below; these details aid record keeping and quality documentation in calibration regimes. For specific application advice or measurement strategies, technical assistance is available through Metav Werkzeuge. For precision reference needs select the ceramic Grade 1 end measure from Metav IndustryLine — contact Metav Werkzeuge for procurement guidance and application support. Technical Data Article number: M324.001.34 GTIN: 4054469142715 Label: Keramik-Endmaß 1,34mm, Güte 1 DIN 861/1 Category: Endmasse Facts Nominal size: 1.34 mm Tolerance grade: 1 (DIN 861/1) Weight: 0.002 kg Tariff number: 90173000 Special features Material: Ceramic Manufacturer: Metav IndustryLine Category path: Messgeräte → Endmasse FAQ What level of accuracy does this gauge block offer? The ceramic gauge block is manufactured to Grade 1 (DIN 861/1) tolerances, providing a stable reference suitable for fine inspection tasks and calibration checks. Is the ceramic material suitable for routine shop-floor use? Yes; the ceramic construction offers low thermal expansion and excellent wear resistance, making the gauge block appropriate for repeated comparative measurements in both workshop and laboratory settings. Which identifiers should be recorded for traceability? Record the SKU M324.001.34 and GTIN 4054469142715 when logging the ceramic gauge block for quality records and calibration traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.34mm Gauge Block, DIN EN ISO 3650 Grade 0, Hardened Special Steel - Metav IndustryLine
Take advantage of a traceable reference size that combines DIN EN ISO 3650 conformity with Grade 0 manufacturing and a hardened special steel body for lasting dimensional stability; order the gauge via Metav Werkzeuge or consult our advisers for procurement and technical details. Single end gauge 1.34 mm (Grade 0, DIN EN ISO 3650) — Metav IndustryLine A single end gauge 1.34 mm designed as a reliable reference standard for precision metrology, inspection work and workshop quality control. DIN EN ISO 3650 compliance, Grade 0 Hardened special steel for dimensional stability Nominal size 1.34 mm, high repeatability Compact, lightweight reference gauge Reliable reference for inspection and calibration benches The Metav IndustryLine single end gauge 1.34 mm serves as a compact reference gauge for repeatable dimensional checks and verification tasks. Conforming to DIN EN ISO 3650 and produced to Grade 0, it provides a stable nominal size that supports consistent measurement routines on the shop floor and in inspection areas. The small footprint and low mass reduce handling-induced errors, making this end standard suitable for frequent use when a traceable, fixed-size reference is required. Material choice and construction that preserve accuracy Manufactured from hardened special steel, the end standard resists wear and preserves its form under typical workshop conditions. The chosen material and heat treatment enhance dimensional stability, reducing the risk of surface deformation during manual handling. A compact cross-section design balances stiffness and accessibility, so the gauge remains a dependable reference even in confined measuring setups. These attributes reduce drift over time and contribute to long-term reliability of measurement processes. Practical applications and handling guidance This compact reference is intended for precision checks, incoming part inspection and comparative verification across gauges and fixtures. The 1.34 mm nominal size is ideal for fine-detail applications where a fixed reference point is required. Lightweight construction eases placement and removal, while the simple geometry supports quick visual alignment. For integration into existing verification routines, the gauge can be used alongside calibration blocks and measuring stands to create stable, repeatable setups that support efficient quality control. For traceable reference work, choose the Metav IndustryLine end gauge and contact Metav Werkzeuge for procurement and technical advice. Technical data Article number: M319.0134.0 GTIN: 4054469130828 Tariff number: 90173000 Facts Nominal size: 1.34 mm Weight: 0.006 kg Accuracy grade: 0 Material & features Material: Special steel, hardened Standard: DIN EN ISO 3650 Category: End gauges Cross-section: up to 10 mm → 30 x 9 mm; from 10.1 mm → 35 x 9 mm FAQ What applications suit this end gauge best? This end gauge is intended for precision reference checks, inspection tasks and comparative measurements in workshop and laboratory settings; the M319.0134.0 functions as a stable, fixed-size reference for repeatable control routines. Is the size traceable to a recognised standard? Yes, the gauge conforms to DIN EN ISO 3650, ensuring the nominal 1.34 mm size is manufactured to the requirements of that standard and suitable for use as a reference standard. What does Grade 0 mean for measurement work? Grade 0 indicates the highest manufacturing accuracy within the applicable standard for this product, providing a reliable reference dimension and minimising variation during routine verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.35 mm Gauge Block Grade 1, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of a DIN EN ISO 3650 Grade 1 reference that combines traceable conformity and a hardened special steel body for long-term stability; the compact nominal size of 1.35 mm supports precise comparative checks and efficient bench workflows. Order this reference piece directly via Metav Werkzeuge or consult the technical team for application advice. End gauge 1.35 mm — Grade 1 reference gauge block by Metav IndustryLine The End gauge 1.35 mm, DIN EN ISO 3650, Grade 1 is a compact, hardened reference standard for precision calibration and verification tasks in inspection benches and small laboratories. Grade 1 accuracy, DIN EN ISO 3650 Hardened special steel construction Nominal size 1.35 mm Compact cross-section for stable handling Reliable conformity for traceable measurement results Manufactured to DIN EN ISO 3650 and specified as Grade 1, this reference delivers a reproducible baseline for comparative inspections and gauge verification. The nominal dimension of 1.35 mm serves as a stable reference in dimensional chains, reducing uncertainty when used against micrometres, callipers or comparator setups. Compliance with the standard ensures interchangeability with other Grade 1 artefacts and supports documented quality routines, contributing to shorter inspection loops and more consistent process control. Durable construction that keeps calibration intervals predictable The shaft is made from hardened special steel, providing excellent wear resistance and dimensional stability under repeated contact. The available cross-section options — 30x9 mm for smaller sizes and 35x9 mm for larger cuts — give a compact footprint with increased stiffness where required, so handling is steady during quick comparative checks. At a nominal mass of 0.006 kg the piece is easy to manoeuvre while remaining robust enough for routine shop use, which helps extend service intervals and lowers total cost of ownership over time. Practical fit for workshop and laboratory workflows As a Grade 1 reference, this block is suitable for incoming inspection, master setting and selective calibration tasks where a compact, high-quality gauge is needed. The compact geometry simplifies placement against measuring jaws or fixture faces and supports rapid verification cycles, enabling faster throughput in assembly or maintenance operations. Documentation of the standard and the unit’s identifiers aids traceability in quality records and helps maintain audit-ready measurement systems. For a reliable Grade 1 reference from Metav IndustryLine, contact Metav Werkzeuge to discuss how this 1.35 mm end gauge fits into existing calibration routines or to request a tailored quotation Technical data Article number: M319.0135.1 GTIN: 4054469130859 Category: End gauges Facts Nominal size: 1.35 mm Weight: 0.006 kg Standard: DIN EN ISO 3650 Grade: 1 Special features Material: Special steel, hardened Cross-section: up to 10 mm — 30x9 mm; from 10.1 mm — 35x9 mm Tariff number: 90173000 FAQ What standard does this reference meet? The End gauge 1.35 mm is manufactured to DIN EN ISO 3650 and specified as Grade 1 for consistent interchangeability. What material is used for the gauge? This Metav IndustryLine reference is made from hardened special steel, chosen for dimensional stability and wear resistance. Is the nominal size 1.35 mm adjustable? The nominal dimension for the End gauge 1.35 mm (M319.0135.1) is fixed; it serves as a reference standard for comparative measurements. For which applications is this Grade 1 block suitable? The Grade 1 block is intended for bench calibration, comparator checks and incoming inspection tasks where a compact, precise reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.35 mm Gauge Block Single End, Hardened Special Steel, DIN EN ISO 3650 Grade 0 - Metav IndustryLine
Benefit from Grade 0 accuracy, a 1.35 mm nominal value and a hardened special steel construction that together provide a stable reference for precision tasks; order the gauge block directly via Metav Werkzeuge or consult our specialists for application advice. Single gauge block 1.35 mm (DIN EN ISO 3650) — Grade 0, hardened special steel by Metav IndustryLine The Single gauge block 1.35 mm delivers a standardised reference length for high-precision measurement and inspection tasks in workshops and quality laboratories. DIN EN ISO 3650 compliant Grade 0 accuracy Hardened special steel Compact 1.35 mm nominal size Reliable reference length for measurement chains A compact, standardised reference such as this gauge block provides a reproducible baseline for setting micrometers, verniers and comparator fixtures. The DIN EN ISO 3650 compliance ensures compatibility with established calibration and inspection procedures, while the Grade 0 specification defines the geometric tolerances required for traceable reference work. The short nominal length minimises thermal and handling influence, making the block particularly useful in transfer measurements and when constructing stepped stacks for comparative checks. Durable construction that maintains dimensional stability Manufactured from hardened special steel, the component resists wear and deformation under normal workshop use, aiding long-term stability of the reference dimension. The compact cross-section (30 x 9 mm for sizes up to 10 mm) gives a stiff profile that is less prone to bending during handling. For technicians who require consistent reproducibility across repeated checks, the combination of material hardness and controlled geometry reduces the need for frequent corrective adjustments, supporting efficient quality routines. Practical use and integration into inspection workflows This individual gauge block is suited to both shop-floor and inspection-room roles: as a single reference element, it integrates into comparator setups, stack building and instrument zeroing. The small mass supports easy handling and rapid stacking, while the standardised dimension helps to harmonise measurement procedures between departments. When used as part of a calibrated set, the component contributes to a measurable chain of custody for quality documentation and process validation. For traceable, workshop-ready reference measurements choose the Metav IndustryLine single gauge block — contact Metav Werkzeuge for tailored advice and fast delivery from Emmerich at info@metav-werkzeuge.com or +49 2822 7131930. Technical Data SKU: M319.0135.0 GTIN: 4054469130842 Nominal size: 1.35 mm Material: hardened special steel Standard: DIN EN ISO 3650 Grade: 0 Weight: 0.006 kg Cross-section: 30 x 9 mm Facts Nominal value: 1.35 mm Weight: 0.006 kg Tariff number: 90173000 eClass: 21170108 Special features Material: hardened special steel Standard conformity: DIN EN ISO 3650 Grade: 0 Category: Gauge blocks (Endmasse) FAQ What tolerance class does this gauge block meet? The single gauge block meets Grade 0 tolerance as specified by DIN EN ISO 3650, providing a high level of dimensional precision for reference tasks. Is the block suitable for laboratory and workshop use? Yes, the 1.35 mm gauge block is designed for both workshop and inspection-room use; its hardened special steel construction supports routine handling and precise reference measurements. How does the cross-section affect handling? The smaller cross-section for sizes up to 10 mm (30 x 9 mm) ensures stiffness and ease of manipulation when building stacks or setting instruments with the M319.0135.0 gauge block. Can this gauge block be used to set micrometers and comparators? The single gauge block is intended precisely for setting and verifying micrometers, verniers and comparator fixtures in standard measurement workflows. What documentation accompanies the product? Product details include standard conformity information (DIN EN ISO 3650) and the SKU M319.0135.0; specific calibration documentation is provided according to ordering and calibration options. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.35mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Benefit from the combination of ceramic stability, Grade 1 DIN 861/1 accuracy and a compact 1.35 mm nominal size for reproducible reference measurements. Order the Ceramic gauge block 1.35 mm directly via Metav Werkzeuge or ask our consultants if needed. Ceramic gauge block 1.35 mm — Grade 1 accuracy (DIN 861/1) from Metav IndustryLine Ceramic gauge block 1.35 mm, Grade 1 DIN 861/1 is a compact reference standard intended for high-precision length setting and calibration tasks in metrology, workshop and quality-control environments. Grade 1 per DIN 861/1 High-stability ceramic Nominal size 1.35 mm Lightweight 0.002 kg Precision where fine tolerances define the outcome The Grade 1 specification in accordance with DIN 861/1 positions this gauge block as a metrology-grade reference for small-length settings. With a nominal size of 1.35 mm, the slip is designed to serve as a reproducible datum when setting comparators, standards for micrometres or when verifying gauge stacks. The clear specification underpins predictable performance and supports quality processes that depend on stable, repeatable length references. Material benefits that support long-term stability Made from ceramic, the gauge block combines dimensional stability with excellent resistance to wear and corrosion compared with many metallic slips. The low coefficient of thermal expansion typical of ceramic materials reduces thermal drift during handling and short measurement intervals, while surface hardness contributes to wear resistance under normal use. These material properties make the component particularly suitable for environments where magnetic effects or chemical corrosion could compromise steel references. Compact format for versatile workshop and lab use Weighing just 0.002 kg and offering a small footprint, the block is easy to integrate into existing reference sets and handling routines without adding bulk. Its compact geometry suits fine adjustment tasks and close-range instrument setting where space and handling precision are important. The lightweight design also reduces operator fatigue during repeated handling and contributes to a predictable tactile feel when assembling gauge stacks or performing direct length comparisons. Procurement and identification made straightforward The product is identified by SKU M324.001.35 and GTIN 4054469142722, which simplify ordering and stock management for purchasing departments. The included customs tariff number supports cross-border procurement and logistics. For applications requiring documented traceability or formal calibration certificates, Metav Werkzeuge can advise on available calibration services and documentation to match internal quality-management requirements. For a reliable small-length reference with proven ceramic stability and Grade 1 conformity, choose the Metav IndustryLine ceramic gauge block and contact Metav Werkzeuge for detailed procurement or calibration options via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: M324.001.35 GTIN: 4054469142722 Customs tariff number: 90173000 Category: Endmasse Material: Ceramic Nominal size: 1.35 mm Grade: 1 (DIN 861/1) Weight: 0.002 kg Facts Nominal size: 1.35 mm Weight: 0.002 kg Grade: 1 (DIN 861/1) GTIN: 4054469142722 Special features Ceramic construction Compact format for fine-length settings Suitable as a reference standard for comparators and micrometres FAQ What does Grade 1 (DIN 861/1) mean for this gauge block? Grade 1 per DIN 861/1 indicates a metrology-grade tolerance class; the Ceramic gauge block 1.35 mm is manufactured to meet this standard for its nominal size, making it suitable as a reproducible length reference. Can the ceramic block be used to set micrometres and comparators? Yes. The Ceramic gauge block 1.35 mm is intended as a reference standard for setting and checking micrometres, comparator probes and other precision measuring instruments. What advantages does ceramic provide over steel gauge blocks? Ceramic offers low thermal expansion, good surface hardness and resistance to corrosion, so the Ceramic gauge block 1.35 mm maintains dimensional stability in situations where metallic slips may be affected by temperature, magnetism or surface oxidation. Is the block suitable for magnetic environments or sensitive electronics labs? Ceramic is non‑magnetic and chemically inert, which makes the Ceramic gauge block 1.35 mm appropriate for use in magnetic or electronics-sensitive environments where steel references could be problematic. How is the item identified for procurement and stock control? The Ceramic gauge block 1.35 mm is listed under SKU M324.001.35 and GTIN 4054469142722, which facilitate ordering, inventory management and cross-border shipping documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.36 mm Gauge Block, DIN EN ISO 3650 Grade 1, Hardened Special Steel - Metav IndustryLine
Reliable reference standard for workshop and laboratory use: Grade 1 accuracy, hardened special steel and compliance with DIN EN ISO 3650 combine to deliver repeatable dimensional checks and stable reference settings; order the gauge block directly via Metav Werkzeuge or ask our consultants if needed Gauge block 1.36 mm – Grade 1, DIN EN ISO 3650 (Metav IndustryLine) A precision reference gauge block 1.36 mm designed for dimensional control, calibration and setting tasks in metrology labs and machine workshops Grade 1 accuracy per DIN EN ISO 3650 Hardened special steel construction Compact 30 x 9 mm cross-section for 1.36 mm Trusted reference for reproducible measurements The block serves as a stable reference for fine adjustment and calibration work. Manufactured to DIN EN ISO 3650, its Grade 1 tolerance ensures that measurement chains remain reliable when setting micrometers, calibrating gauges or checking fixture positions. The nominal size 1.36 mm is suitable for assembling length standards and verifying short-range instruments where absolute traceability and low uncertainty are required. Durable material and geometry for long service life Made from hardened special steel, the component resists wear and preserves flatness over many comparison cycles, reducing replacement frequency and downtime. The compact 30 x 9 mm cross-section (applies to sizes up to 10 mm) gives a good balance between stability and handling: the block is rigid enough to maintain geometry yet small enough for precise placement in fixtures or on measurement plates. This combination supports consistent results over repeated use. Practical use in workshop and laboratory routines The design facilitates quick incorporation into everyday processes: the block is ideal for setting gauges, checking stepped dimensions and producing reference stacks. As a Grade 1 reference, it shortens setup times and helps prevent costly rework by providing an unambiguous dimensional benchmark. Through faster machine setup and fewer measurement discrepancies, operational efficiency improves and production quality stabilises. Handling, care and compatibility with inspection workflows For reliable performance, the block should be handled with clean gloves and stored in a dry, dust-free box to avoid abrasion and corrosion. Its hardened steel composition is compatible with standard cleaning oils and protective sprays used in metrology environments. When combined with other reference slips, the block integrates seamlessly into calibration routines and comparison chains used in precision workshops and inspection rooms. For purchase enquiries or application advice on this Metav IndustryLine gauge block, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for personalised guidance and supply options Technical data Article number: M319.0136.1 GTIN: 4054469130873 Norm: DIN EN ISO 3650 Nominal size: 1.36 mm Material: Special steel, hardened Grade: 1 Weight: 0.006 kg Tariff number: 90173000 Label: Endmaß 1,36 mm, DIN ISO 3650, Güte 1 DIN ISO 3650 Facts Cross-section up to 10 mm: 30 x 9 mm Category: Gauge blocks / Endmasse Suitable range: precision reference and calibration Manufacturer brand: Metav IndustryLine Special features Hardened for wear resistance DIN EN ISO 3650 compliant Compact format for short-range references Stable geometry for repeatable checks GTIN and SKU for traceability FAQ What tolerance class does the gauge block meet? The gauge block meets Grade 1 tolerance according to DIN EN ISO 3650, providing a reliable reference for workshop and laboratory checks. What material is used and how does it affect usage? Constructed from hardened special steel, the block offers enhanced wear resistance and stable flatness, which supports frequent comparison measurements without rapid degradation. Is this block suitable for setting micrometers and gauges? Yes. The 1.36 mm gauge block from Metav IndustryLine (SKU M319.0136.1) is intended for precision setting tasks and integrates easily into gauge and micrometer calibration workflows. What are the physical cross-section dimensions for this nominal size? For nominal sizes up to 10 mm, the cross-section is 30 x 9 mm, which balances rigidity and ease of handling for short reference lengths. How should the block be stored to preserve accuracy? Store the block in a dry, dust-free environment and handle with clean gloves; regular light maintenance with appropriate protective oil will prolong its service life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.36 mm Gauge Block, Grade 0, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of Grade 0 accuracy, DIN EN ISO 3650 conformity and the durable hardened special steel construction to secure traceable reference lengths for inspection and calibration tasks. Order the gauge block directly via Metav Werkzeuge or consult our specialists for measurement planning. Single gauge block 1.36 mm — Grade 0 precision (Metav IndustryLine) A single gauge block 1.36 mm, designed as a length standard for laboratory and workshop metrology under DIN EN ISO 3650 DIN EN ISO 3650 compliant Grade 0 tolerance for submicron control Hardened special steel construction Precision that supports reproducible quality control The compact centimetre-scale reference delivers a nominal size of 1.36 mm with a manufacturing tolerance corresponding to Grade 0 under DIN EN ISO 3650, which makes it suitable for high-accuracy comparative measurements and calibration chains. The tight tolerance and stable material mean the block provides repeatable length standards for gauge stacks and direct comparison tasks, reducing uncertainty in everyday inspection routines. Robust material and form for long-term stability Manufactured from hardened special steel, the block resists wear and surface damage during handling and wringing. The specified cross-section for small sizes (up to 10 mm: 30 × 9 mm) ensures a stable profile that aids precision wringing and handling, while the hardened finish minimises dimensional drift during typical workshop use. This combination reduces the need for frequent replacement and maintains measurement confidence over time. Practical integration into calibration and inspection workflows As a single, standard-compliant length artefact, the block is ideal for establishing master references, checking micrometre and calliper calibration, or forming part of a certified gauge block set. The compact weight (approx. 0.006 kg) and standard geometry facilitate quick alignment and wringing to other blocks, enabling swift verification steps without complex fixturing. The clear compliance with the ISO standard supports traceability in quality documentation and internal audits. Designed for traceability and ease of documentation The product's conformity to DIN EN ISO 3650 simplifies traceability records and supports consistent reporting within quality systems. The clear labelling and standard dimensions allow straightforward incorporation into inspection certificates and measurement plans, helping maintain audit-ready documentation and reducing ambiguities during quality reviews. Contact Metav Werkzeuge for certified Grade 0 gauge blocks from Metav IndustryLine and ensure traceable, workshop-ready precision for your inspection processes Technical Data SKU: M319.0136.0 GTIN: 4054469130866 Manufacturer: Metav IndustryLine Nominal size: 1.36 mm Weight: 0.006 kg Tariff code: 90173000 Tolerance grade: 0 Material: special steel, hardened Standard: DIN EN ISO 3650 Cross-section: up to 10 mm — 30 x 9 mm Category: Endmasse (gage blocks) FAQ What is the stated tolerance grade for this gauge block? The gauge block is manufactured to Grade 0 tolerance in accordance with DIN EN ISO 3650, providing tight dimensional control for calibration and inspection. Is the material suitable for routine wringing and workshop handling? Yes; the block is made from hardened special steel, a material chosen to withstand repeated wringing and typical workshop handling while preserving surface integrity. Can this single block be used for establishing traceability in a calibration lab? The single gauge block 1.36 mm complies with DIN EN ISO 3650, making it suitable as a traceable reference within a calibration chain when documented appropriately. How does the cross-section affect usability for small-size blocks? The specified 30 x 9 mm cross-section for sizes up to 10 mm offers a stable profile that eases wringing and handling, improving reproducibility during short comparative checks. What is the product code for ordering and inventory? The product is listed under SKU M319.0136.0 and GTIN 4054469130866, simplifying procurement and stock management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.36mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of the Grade 1 accuracy, low thermal expansion and hard-wearing ceramic construction for reproducible reference measurements; order the ceramic gauge block directly via Metav Werkzeuge or ask the consultants for application-specific advice. Ceramic gauge block M324.001.36 — 1.36 mm, Grade 1 (DIN 861/1) The Ceramic gauge block M324.001.36 provides a thermally stable 1.36 mm reference for high-precision length calibration and inspection tasks in metrology laboratories and quality control. Grade 1 accuracy to DIN 861/1 Stable ceramic construction Nominal size 1.36 mm for fine calibration Lightweight 0.002 kg for easy handling Exceptional dimensional stability for reference standards The combination of Grade 1 conformity (DIN 861/1) and a ceramic base material yields a reference block with very low thermal expansion and excellent wear resistance, which reduces drift during repeated use. This stability directly lowers measurement uncertainty when used as a reference in comparators, length gauges or stack assemblies. The compact 1.36 mm nominal size makes this block especially suitable for fine adjustments and for establishing short reference steps in calibration sets, where minimal contact deformation and consistent surface integrity are required. Material benefits that improve measurement reliability A ceramic measuring surface offers distinct advantages over steel in environments where temperature fluctuations or corrosion risk are factors: reduced sensitivity to temperature changes, no rusting, and high surface hardness that preserves the reference face profile. These properties support reproducible wringing and long service life, helping laboratories and inspection stations maintain stable reference standards with fewer replacements. The block’s low mass and rigid geometry contribute to straightforward handling during set-up and stacking, while the hard-wearing surface sustains accurate mating with other gauge blocks. Practical use and handling in the calibration workflow Integration into a calibration workflow is straightforward: the block functions as a precise length reference for setting measuring instruments, checking gauges or building gauge stacks. Careful handling and clean-room‑style storage will preserve the surface quality; use lint-free cloths and appropriate storage trays to avoid contamination. When combined with complementary reference blocks, this ceramic element supports stepwise verification across the small-range spectrum. The M324.001.36 is suited to calibration laboratories and precision workshops seeking compact, durable references for repeatable short-range measurements. For reliable Grade 1 reference measurements and procurement assistance, contact Metav Werkzeuge for tailored advice and ordering support via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M324.001.36 GTIN: 4054469142739 Material: Ceramic Nominal size: 1.36 mm Grade: 1 (DIN 861/1) Weight: 0.002 kg Tariff number: 90173000 Facts Nominal size: 1.36 mm Weight: 0.002 kg Grade: 1 Tariff number: 90173000 Special features Category: Gauge blocks (Endmasse) eClass: 21170108 SKU: M324.001.36 Label: Keramik-Endmaß 1,36mm, Güte 1 DIN 861/1 FAQ What accuracy class does this gauge block meet? The ceramic gauge block meets Grade 1 accuracy according to DIN 861/1, providing a reliable short-range reference for calibration and inspection. Is the material suitable for environments with temperature fluctuations? Yes, the ceramic construction offers low thermal expansion, which helps maintain dimensional stability under typical laboratory temperature variations. Can this block be used in gauge stacks for instrument setting? The block is designed for use in stacks and as a short reference step; its hard-wearing faces support repeated wringing and stacking in calibration assemblies. How should the gauge block be stored to preserve accuracy? Store the block in a clean, dry tray or protective compartment and handle with lint-free gloves or cloths to prevent contamination and surface damage. Is the block appropriate for routine workshop verification or specialist laboratory calibration? Its Grade 1 conformity and ceramic properties make it suitable for both precise workshop checks and laboratory calibration tasks requiring a compact, stable reference. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.37 mm Gauge Block, Hardened Special Steel, DIN EN ISO 3650 Grade 1 - Metav IndustryLine
Taking benefit from DIN EN ISO 3650 conformity and a hardened special steel construction, this end gauge combines reliable dimensional reference and robust handling for routine inspection tasks; the compact cross‑section ensures easy positioning. Order the end gauge directly via Metav Werkzeuge or ask our consultants if needed. End gauge 1.37 mm — Grade 1, DIN EN ISO 3650 (Metav IndustryLine) End gauge 1.37 mm, DIN EN ISO 3650, Grade 1 serves as a precision reference for dimensional inspection and verification in workshops and inspection benches. DIN EN ISO 3650 compliant, grade 1 Hardened special steel construction Nominal size 1.37 mm accuracy Compact cross-section 30×9 mm Reproducible accuracy for routine dimensional checks The end gauge is manufactured to the DIN EN ISO 3650 standard and specified as Grade 1, delivering a reproducible limit for go/no‑go inspection and comparative measurement. The nominal size of 1.37 mm provides a stable reference point for small features, while the hardened special steel ensures dimensional stability under normal workshop handling. This combination reduces uncertainty in pass/fail decisions and supports consistent quality control across repeated inspections. Built for reliable handling and long service life With a compact cross‑section of 30×9 mm (applicable for nominal sizes up to 10 mm) and a mass of approximately 0.006 kg, the gauge is easy to manoeuvre and positions securely against mating surfaces. The hardened material resists wear during repeated contact, so the calibrated dimension remains dependable over time. The straightforward geometry minimises handling errors and supports efficient inspection workflows in production, maintenance and metrology environments. Traceability and shop‑floor integration The item is supplied under the Metav IndustryLine designation and is traceable via SKU M319.0137.1 and GTIN 4054469130897, facilitating inventory management and record keeping. Conformity to DIN EN ISO 3650 makes the gauge suitable as a reference in conventional inspection chains and for comparative checks in machining and assembly operations. For workshops seeking accessible precision, Metav combines a broad product range with practical distribution centred in Emmerich, supporting steady replenishment and standardised tools at the workbench. For specification support or to source the Metav IndustryLine end gauge (SKU M319.0137.1), contact Metav Werkzeuge GmbH in Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and supply options Technical Data Article number: M319.0137.1 GTIN: 4054469130897 Material: Hardened special steel Standard: DIN EN ISO 3650 Grade: 1 Nominal size: 1.37 mm Weight: 0.006 kg Cross-section: 30×9 mm (for ≤10 mm) Numbers Nominal size: 1.37 mm Weight: 0.006 kg Tariff number: 90173000 eClass: 21170108 Special features Hardened special steel DIN EN ISO 3650 conformity Grade 1 tolerance Category: End gauges Brand: Metav IndustryLine FAQ What tolerance class does this gauge represent? The end gauge is specified as Grade 1, aligning with the tolerance requirements set out in DIN EN ISO 3650 for limit gauges. What material is used for the gauge? This Metav IndustryLine end gauge is produced from hardened special steel, chosen for dimensional stability and wear resistance. How is the size indicated and traceable? The nominal size is 1.37 mm; traceability is supported via SKU M319.0137.1 and GTIN 4054469130897 for inventory and documentation. For which applications is this gauge suitable? The gauge is suited to go/no‑go inspection, comparative reference checks and small‑feature verification in workshops, production and basic inspection benches. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
ensure traceable length calibration with gauge blocks
gauge blocks, also called slip gauges or end gauges, are precision length standards designed to transfer exact measures during calibration and setup. Manufactured and graded for metrological use, they provide the reference dimensions needed to verify and adjust measuring instruments in industrial workshops and calibration labs.
how gauge blocks work and where they are essential
gauge blocks are used to create known lengths by wringing individual blocks together or by using a single block as a reference. length calibration in industry commonly relies on parallel gauge blocks, while angle, cylinder and sphere end gauges serve specialised tasks. these blocks are produced in steel, ceramic or carbide, and their material choice balances wear resistance with thermal behaviour. regular calibration—typically performed annually—by DAkkS-accredited laboratories ensures traceability. the highest-precision reference work, class K, is certified by the PTB using laser techniques; classes 0, 1 and 2 are tested under progressively less controlled conditions (class 0 in a climate-controlled lab, class 1 in a standard measurement room, class 2 in production).
measurable benefits that cut downtime and uncertainty
- consistent, traceable length standards reduce rework and measurement disputes by enabling reliable instrument calibration.
- choosing the correct material (steel, ceramic, carbide) extends service life and limits wear in high-use environments.
- selecting the right accuracy class (K, 0, 1 or 2) matches calibration effort to application needs and avoids over‑specification.
- annual calibration by accredited labs maintains documented compliance and supports quality systems such as ISO.
why Metav is a smart partner for precision standards
Metav combines specialist knowledge with a broad range of measurement technology, making the procurement of gauge blocks straightforward and dependable. with over 48,000 customers and more than 250,000 products stocked from Emmerich, Metav acts as a pragmatic quality filter for European workshops, reducing supplier complexity and ensuring consistent supply.
In short, gauge blocks deliver traceable, material‑appropriate and class‑matched references that keep calibration workflows efficient and auditable.
faq
what materials are gauge blocks available in and why does it matter?
gauge blocks are typically supplied in steel, ceramic or carbide. material choice affects wear resistance, stability and thermal expansion; selecting the right material for your environment optimises longevity and measurement stability.
how often should gauge blocks be calibrated?
industry practice is an annual calibration cycle, carried out by DAkkS-accredited laboratories, though frequency can be increased depending on usage and required uncertainty.
what do the accuracy classes k, 0, 1 and 2 indicate?
the classes denote graded tolerances and test conditions: K is the highest precision (certified by PTB with laser measurement), class 0 is checked under climate-controlled lab conditions, class 1 in a normal measurement room and class 2 in production environments.
are parallel gauge blocks always used for length calibration?
yes; for length calibration the parallel gauge blocks are the primary standard because they provide exact planar faces for wringing and stacking to create precise lengths.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com