End gauges for precise length calibration
End gauges provide exact reference lengths for calibrating measurement instruments and ensuring consistent dimensional accuracy in metalworking and inspection processes. Used in production and laboratory settings, these end gauges—made from steel, ceramic or carbide—allow technicians to compensate for wear and thermal effects and maintain measurement traceability, especially when employed alongside parallel end gauges, cylinder gauges and calibration masters. Classes 0, 1 and 2 define practical tolerance levels for workshop, inspection-room and production use respectively, delivering the repeatable precision required for machining and quality control.
1.37mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of the combination of ceramic material, Grade 1 tolerance and a precise 1.37 mm nominal size to secure a stable reference standard for length checks and comparative measurements; order the gauge block directly via Metav Werkzeuge or consult the technical advisors for application guidance. Ceramic gauge block 1.37 mm, Grade 1 (DIN 861/1) — Ceramic precision gauge block by Metav IndustryLine Ceramic gauge block 1.37 mm, Grade 1 (DIN 861/1) is a dimensionally stable reference standard intended for high‑accuracy length measurement and comparative calibration tasks in metrology laboratories and quality control environments Ceramic construction for thermal stability Grade 1 tolerance according to DIN 861/1 Nominal length 1.37 mm Corrosion‑free and wear resistant Stability that secures repeatable reference measurements The use of ceramic as the base material provides exceptionally low thermal expansion and excellent dimensional stability, making this end measure well suited for repeatable reference measurements. With a nominal length of 1.37 mm and compliance to Grade 1 (DIN 861/1), the component serves as a reliable comparative standard where small deviations influence downstream processes. The compact format minimises handling-induced errors and supports consistent stacking with other precision blocks, while the material's inert nature reduces the need for anticorrosive treatments. Practical handling and workshop integration A compact, low‑mass ceramic gauge block offers straightforward handling and long service life under normal workshop conditions. The wear resistance and corrosion‑free surface of the material reduce maintenance cycles and keep contact faces stable over repeated use. For use in sets or as a single reference, the geometry supports conventional wringing and pairing with steel or ceramic mates; the result is a practical balance between usability and lifetime performance. Handling recommendations and storage in a clean, dry box extend serviceable life and help preserve measurement certainty. Compliance, verification and quality assurance Designed to meet established metrological standards, the component’s Grade 1 classification under DIN 861/1 provides a recognised baseline for tolerance and interchangeability within precision toolsets. This makes the block suitable for routine verification tasks in inspection departments and for integration into master sets used for incoming goods checks. Technical documentation references the nominal dimension and material, enabling traceable record‑keeping in quality management systems and easing conformity assessments during audits. Request further technical documentation or purchase information from Metav Werkzeuge; technical advisors at Metav Werkzeuge can provide application guidance and delivery details via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M324.001.37 GTIN: 4054469142746 Material: Ceramic Nominal size: 1.37 mm Grade: 1 (DIN 861/1) Weight: 0.002 kg Tariff number: 90173000 Facts Nominal length: 1.37 mm Weight: 0.002 kg Standard: DIN 861/1 GTIN: 4054469142746 Special features Ceramic construction Corrosion‑free contact faces High thermal stability Wear resistant surface Intended as a reference / end measure FAQ What material is the block made from? The block is manufactured from ceramic, chosen for low thermal expansion and long‑term dimensional stability. What tolerance class does this end measure meet? This end measure complies with Grade 1 according to DIN 861/1, suitable for many laboratory and workshop reference tasks. What is the exact nominal length and article number? The nominal length is 1.37 mm and the article number / SKU is M324.001.37. Can this ceramic block be used together with steel gauge blocks? Yes, the block can be wrung and paired with steel or other ceramic blocks; attention to surface cleanliness and handling practice is advised to preserve face integrity. Is the material corrosion‑resistant and suitable for long‑term storage? The ceramic construction is corrosion‑free and, when stored in a clean, dry environment, supports long service life and stable measurement performance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.37mm Gauge Block, Hardened Special Steel, DIN EN ISO 3650 Grade 0 - Metav IndustryLine
Precision and durability combine in a compact reference standard: DIN EN ISO 3650 Grade 0 accuracy, hardened special steel construction and a small 30×9 mm cross-section ensure stable handling and reproducible results. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Gauge block 1.37 mm — DIN EN ISO 3650, Grade 0 (Metav IndustryLine) Gauge block 1.37 mm provides a compact, high-precision slip gauge for calibration and dimensional inspection across workshops and metrology labs. DIN EN ISO 3650 Grade 0 accuracy Hardened special steel construction Compact 30×9 mm cross-section for stable handling Reference accuracy for reliable calibration results The small-format gauge block is manufactured to DIN EN ISO 3650 and Grade 0, making it suitable as a reference standard for fine dimensional checks. Grade 0 indicates that the block meets stringent geometric and dimensional requirements defined in the standard, which supports repeatable measurements when used as a baseline for comparators and master gauges. The nominal size of 1.37 mm is ideal for fine calibration tasks and routine inspection, offering a compact reference that reduces thermal mass and eases handling during frequent changeovers. Robust materials for consistent measurement performance Constructed from hardened special steel, the block combines wear resistance with low deformation under normal use. The cross-section for sizes up to 10 mm is 30×9 mm, providing a compact profile that remains torsion‑resistant during clamping and stacking. The low mass (approx. 0.006 kg) minimises thermal drift during short handling periods; when combined with correct storage practices this supports stability and long service life. The material choice and heat treatment ensure that surface integrity and contact faces remain consistent, which is essential for dependable comparative measurements. Practical integration into workshop quality routines As a small, precise slip gauge, this item fits easily into existing calibration sets and inspection routines, serving both as a standalone reference and as part of a larger set. The compact geometry speeds placement and repeatability during sequential checks, while the Grade 0 classification reassures quality departments that results conform to recognised metrology norms. For traceability and documentation, Metav provides calibration services and can advise on certificates and measurement chains, ensuring the block integrates smoothly into the documented quality processes of production and inspection environments. Contact Metav Werkzeuge for detailed specifications, calibration options and advice on integrating this Metav IndustryLine gauge block into the quality workflow Technical data Article number: M319.0137.0 GTIN: 4054469130880 Customs tariff: 90173000 Facts Nominal dimension: 1.37 mm Weight: 0.006 kg Cross-section (≤10 mm): 30×9 mm Materials & features Hardened special steel Standard: DIN EN ISO 3650 Grade: 0 Category: Endmasse (gauge block) FAQ What does Grade 0 mean for this gauge block? Grade 0 denotes conformity with DIN EN ISO 3650 requirements for geometry and surface quality, confirming the block as a high‑precision reference suitable for calibration and inspection tasks. Is a calibration certificate supplied with the gauge block? A calibration certificate is not automatically supplied with the gauge block; Metav Werkzeuge offers calibration services and certificates on request to establish traceability for quality documentation. What material is the block made from and how durable is it? The block is made from hardened special steel, selected for wear resistance and dimensional stability; the compact 30×9 mm cross-section reduces the risk of deformation during handling and stacking. Can this block be used as a master standard for comparator checks? Yes — the 1.37 mm slip gauge is suitable as a master reference in comparator checks and for extending slip gauge sets, particularly where fine, repeatable reference dimensions are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.38 mm Gauge Block Grade 1, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Benefit from DIN EN ISO 3650 conformity, a hardened special steel construction and a compact cross‑section that supports reliable go/no-go checks in production control. Order the end gauge directly via Metav Werkzeuge or consult our specialists for application advice. End gauge 1.38 mm (DIN EN ISO 3650) — Grade 1, hardened special steel The End gauge 1.38 mm is a precision limit gauge for fast verification of small cylindrical features in quality inspection and assembly operations Conforms to DIN EN ISO 3650, Grade 1 Hardened special steel for long service life Compact cross-section for tight fixtures Process reliability through standardised manufacturing Manufactured to DIN EN ISO 3650 and classified as Grade 1, this end gauge offers a reproducible reference for go/no-go assessment of shafts and cylindrical features. The hardened special steel body ensures dimensional stability and wear resistance, helping to maintain a constant reference over repeated cycles. With such conformity, the gauge supports process control strategies by providing a clearly defined acceptance criterion rather than a subjective visual check. This rational, standards-based approach reduces inspection variability and contributes directly to consistent production output. Practical format for tight inspection set-ups The compact cross-section (30 × 9 mm up to 10 mm nominal size; 35 × 9 mm from 10.1 mm) and very low mass make the instrument easy to position in fixtures and manual gauges. The small form factor suits bench‑top checkers and narrow tool fixtures where space is limited, while the robust finish resists handling wear. Thanks to its concise geometry and repeatable seating, the gauge is effective where quick verification is required during assembly or final inspection, improving throughput without compromising measurement reliability. Integration into quality workflows and storage guidance As a purpose-built limit gauge, the item integrates directly into existing inspection workflows: use it for go/no-go decisions, fixture master checks or as part of a gauge set. Protect the working faces from knocks and contamination when not in use to preserve the reference surface and avoid false rejects. Routine visual inspection and gentle cleaning with a lint‑free cloth will help preserve fit and function. For traceability and inventory control, the supplied article number and GTIN facilitate orderly stock management and documentation within quality systems. For assured conformity and durable performance, contact Metav Werkzeuge for availability and technical advice regarding the Metav IndustryLine end gauge supplied from Emmerich by our precision team Technical data Article number: M319.0138.1 GTIN: 4054469130910 Material: Special steel, hardened Norm: DIN EN ISO 3650 Grade: 1 Facts Nominal size: 1.38 mm Weight: 0.006 kg Cross-section up to 10 mm: 30 x 9 mm Cross-section from 10.1 mm: 35 x 9 mm TARIC: 90173000 Special features Manufacturer: Metav IndustryLine Category: End gauge Compact format for small cylindrical parts Hardened finish for extended service life FAQ How is the nominal size defined for this gauge? The nominal size is 1.38 mm; the end gauge is produced to DIN EN ISO 3650 Grade 1 and designed for go/no-go verification of small cylindrical features using a limit‑gauge principle. Can this instrument be used in fixture checks and assembly lines? Yes, the compact cross‑section and hardened construction make the gauge suitable for fixture checks and rapid verification tasks in assembly and inspection stations. What handling and storage practices are recommended? Handle the gauge with care to avoid impacts on the reference faces, store it in a protective pouch or drawer free from dust and corrosive agents, and clean with a lint‑free cloth to maintain accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.38 mm Gauge Block, Hardened Special Steel, DIN EN ISO 3650 Grade 0 - Metav IndustryLine
Take advantage of Grade 0 accuracy and DIN EN ISO 3650 conformity combined with a hardened special steel construction for a reliable metrological baseline; order this precision gauge block directly via Metav Werkzeuge or request advice from our consultants. Single gauge block 1.38 mm – Grade 0, DIN EN ISO 3650 (Metav IndustryLine) Single gauge block 1.38 mm is a precision reference element for calibration benches and verification tasks in workshop and laboratory environments, produced to the requirements of DIN EN ISO 3650 for high-repeatability measurements. Grade 0 accuracy per DIN EN ISO 3650 Hardened special steel construction Nominal length 1.38 mm for reference use Cross-section 30×9 mm for dimensional stability Consistent reference quality for calibration work A Grade 0 block manufactured to DIN EN ISO 3650 delivers a consistently reproducible reference length, reducing uncertainty in comparative measurements. The 1.38 mm nominal value serves as a compact baseline in gauge block sets or as a stand-alone reference for micrometrology tasks. Because the part meets the international standard, it supports traceable procedures in quality control and contributes to faster decision-making in production inspection by supplying a known, stable datum. Robust construction that reduces handling error Made from hardened special steel, the block resists wear and maintains its dimensional integrity over repeated use. The compact cross-section of 30×9 mm (applicable for nominal sizes up to 10 mm) increases stiffness and helps to minimise bending or local distortion during handling. At approximately 0.006 kg, the element is easy to position while still offering enough mass for stable seating, which helps to lower operator-induced variability during short comparative checks. Practical integration into inspection routines Designed as a single end measure for metrological toolkits, this precision element integrates smoothly into calibration sequences and reference stacks. Its conformity to recognised tolerances means it is suitable for use alongside other Grade 0 components when consistent class matching is required. Clear labelling (SKU M319.0138.0, GTIN 4054469130903) simplifies inventory tracking and ensures the part can be referenced in quality documentation and measurement protocols. For Grade 0 traceability and workshop integration, contact Metav Werkzeuge to discuss suitability for specific measurement chains and delivery options. Technical data SKU: M319.0138.0 GTIN: 4054469130903 Norm: DIN EN ISO 3650 Grade: 0 Material: Special steel, hardened Facts Nominal size: 1.38 mm Weight: 0.006 kg Cross-section: 30 × 9 mm Tariff number: 90173000 Special features Hardened special steel Grade 0 tolerance class DIN EN ISO 3650 compliant Compact profile for dimensional stability FAQ What accuracy class does this gauge block conform to? The single gauge block conforms to Grade 0 tolerance limits as specified in DIN EN ISO 3650, offering a high level of dimensional accuracy for reference applications. What material is used and how does it affect durability? The element is made from hardened special steel, which provides wear resistance and long-term dimensional stability for frequent use in calibration and inspection tasks. Is this block suitable for inclusion in a gauge block set? Yes, the item is suitable for use alongside other components of the same tolerance class; matching Grade 0 elements is recommended to preserve overall stack accuracy. Does the product data indicate a calibrated delivery? The available product information specifies standard compliance with DIN EN ISO 3650 but does not state that a calibration certificate is included; calibration status is not specified in the data provided. How should the block be stored between uses? Store the block in a clean, dry environment and protect it from contaminants and corrosion; keep it in a designated protective container or rack to avoid damage and preserve the reference surface condition. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.38mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of a ceramic construction, Grade 1 (DIN 861/1) accuracy and the compact 1.38 mm nominal size for stable, repeatable reference measurements; order the gauge block directly via Metav Werkzeuge or contact our consultants for application advice. Ceramic Gauge Block 1.38 mm, Grade 1 (DIN 861/1) — precision reference for calibration The Ceramic Gauge Block 1.38 mm, Grade 1 (DIN 861/1) is a compact reference standard designed for high-stability dimensional checks, setting and verification tasks in workshops and calibration labs. High-stability ceramic construction DIN 861/1 Grade 1 accuracy Nominal size 1.38 mm for precision stacks Corrosion-resistant and non-magnetic Consistent, industry-standard accuracy for measurement routines This reference block provides a reliable basis for dimensional control thanks to its Grade 1 (DIN 861/1) specification, which meets common industry expectations for accuracy in gauge blocks. As a compact precision element, it integrates seamlessly into calibration and setting procedures for micrometres, callipers and comparators, helping to reduce setup time and improve repeatability. The combination of a small nominal dimension and tight manufacturing control supports accurate stacking and fine adjustments in inspection processes. Material advantages that reduce measurement uncertainty Made from ceramic, the block offers superior thermal and chemical stability compared with many metallic standards. Ceramic's low thermal expansion and inherent corrosion resistance contribute to a stable reference length under normal workshop conditions, lowering the risk of drift during short-term use. The non-magnetic nature of the material avoids magnetic interference when working near magnetic measuring fixtures or components, and the wear-resistant surface sustains dimensional integrity over repeated use. Practical use and integration into quality workflows The compact 1.38 mm size is suited for inclusion in precision stacks and for direct use where small, exact increments are required. Its modest mass and form factor make handling straightforward during routine checks, while the clear designation to DIN 861/1 simplifies documentation and traceability in inspection protocols. For workplaces seeking dependable calibration aids without complex handling, this ceramic reference element supports streamlined procedures and consistent outcomes. For traceable, durable reference standards choose the Metav IndustryLine ceramic gauge block and contact Metav Werkzeuge for tailored advice or procurement: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: M324.001.38 GTIN: 4054469142753 Label: Keramik-Endmaß 1,38mm, Güte 1 DIN 861/1 Facts Nominal dimension: 1.38 mm Weight: 0.002 kg Tariff number: 90173000 Special features Material: Ceramic Grade: 1 (DIN 861/1) Category: Endmasse (gauge blocks) FAQ What accuracy class does this gauge block meet? The Ceramic Gauge Block 1.38 mm meets Grade 1 (DIN 861/1) accuracy, providing an industry-standard reference for precise dimensional work. Is the block suitable for use with magnetic fixtures? Yes. The block's ceramic construction is non-magnetic, making it compatible with magnetic fixtures without risk of magnetic interference. Can the block be used in precision stacks or for setting instruments? Yes. With a nominal size of 1.38 mm, the block is well suited for inclusion in precision stacks and for setting micrometres, callipers and measurement machines. How should the ceramic block be stored and handled? Handle the block carefully to avoid surface chips; keep it clean and stored in a dry, dust-free container. Avoid dropping or striking the block against hard surfaces to preserve dimensional integrity. Does this product include a calibration certificate? The product description does not specify a calibration certificate. For traceable calibration services or a formal certificate, please contact Metav Werkzeuge to discuss available options. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.39 mm Gauge Block Individual, Hardened Special Steel, DIN EN ISO 3650 Grade 0 - Metav IndustryLine
Take advantage of the combination of DIN EN ISO 3650 Grade 0 accuracy, hardened special steel construction and a compact 30 × 9 mm cross‑section to establish a reliable reference point in inspection and calibration routines; order the end gauge directly via Metav Werkzeuge or ask our consultants if additional information is required. End gauge 1.39 mm — DIN EN ISO 3650 Grade 0, hardened special steel (Metav IndustryLine) The End gauge 1.39 mm is a precision reference intended for dimensional verification and calibration tasks in metrology laboratories and production quality control. DIN EN ISO 3650 compliant Grade 0 Hardened special steel construction Precise nominal size 1.39 mm Compact, low-mass inspection gauge Measurable accuracy for dependable inspection results The item serves as a traceable reference for dimensional checks where consistent, repeatable results are required. Manufactured to DIN EN ISO 3650 and specified as Grade 0, this gauge offers one of the tightest tolerances within the standard series, making it well suited for high‑precision verification of micrometric settings and gauge comparisons. The nominal dimension of 1.39 mm is finished and tested to provide a reliable datum for comparator setups and reference stacks. By using a standardised end gauge rather than improvised masters, inspection processes become more defensible and easier to document, supporting internal quality procedures and external audits. Long-term stability through material choice and geometry Constructed from hardened special steel, the gauge resists wear and preserves its geometry under normal handling and routine use. The compact cross‑section of 30 × 9 mm (applicable for nominal sizes up to 10 mm) reduces bending moment and thermal mass, which helps to keep dimensional shifts small during brief temperature changes and handling. With a mass of approximately 6 g, the part is easy to position and manoeuvre without compromising contact stability. These design choices minimise the frequency of reworking reference standards and reduce the risk of cumulative error when stacking or comparing multiple master gauges. Practical integration into calibration and production workflows As a single end gauge, the component is straightforward to incorporate into existing inspection routines: it can be used as a reference in comparator benches, as a check standard for micrometres and bore gauges, or as part of master sets for incoming inspection. The simple geometry eases cleaning and handling procedures, while the robust surface finish supports repeated contact with measuring anvils. Documentation and traceability are facilitated by the clear nominal marking and the product’s adherence to a recognised norm, which aids cross‑departmental communication and the maintenance of inspection rigs. For organisations seeking to raise the reliability of their dimensional controls, this reference element is a practical, low‑effort improvement with measurable benefits. For traceable precision, choose the Metav IndustryLine end gauge 1.39 mm — contact Metav Werkzeuge for delivery details and technical advice tailored to your inspection needs. Technical Data Article number: M319.0139.0 SKU: M319.0139.0 GTIN: 4054469130927 Facts Nominal size: 1.39 mm Weight: 0.006 kg (approx. 6 g) Cross‑section: 30 × 9 mm (for nominal sizes ≤ 10 mm) Tariff number: 90173000 Special features Material: Hardened special steel Standard: DIN EN ISO 3650 (Grade 0) Category: End gauge Grade: 0 FAQ What does Grade 0 mean for this end gauge? Grade 0 indicates one of the highest accuracy classes defined in DIN EN ISO 3650 and signifies that the end gauge meets stringent dimensional and surface requirements for use as a reference standard. Can this end gauge be used as a master for comparator setups? Yes. The 1.39 mm end gauge from Metav IndustryLine is intended as a stable reference for comparator benches and for checking measuring instruments where a precise nominal dimension is required. How should the gauge be handled to preserve accuracy? Handle the hardened special steel gauge with clean, dry hands or gloves and avoid unnecessary impacts; keep it in a protective environment when not in use to maintain the surface condition and dimensional integrity. Is this end gauge suitable for stacking with other precision gauges? The gauge’s compact geometry and Grade 0 accuracy make it suitable for inclusion in master sets and controlled stacks, provided stacking procedures follow best practices to avoid excessive side forces. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.39 mm Gauge Block, Hardened Special Steel, DIN EN ISO 3650 Grade 1 - Metav IndustryLine
Take advantage of a DIN EN ISO 3650 Grade 1 finish combined with hardened special steel for consistent Go/No‑Go checks and long service life; order the gauge directly via Metav Werkzeuge or contact Metav's consultants for application advice. End gauge 1.39 mm — DIN EN ISO 3650, Grade 1, hardened special steel (Metav IndustryLine) The End gauge 1.39 mm is a compact precision check gauge for tactile conformity testing of small external diameters, suitable for production inspection and maintenance tasks in metalworking environments. DIN EN ISO 3650 Grade 1 accuracy Hardened special steel for wear resistance Nominal dimension 1.39 mm in compact form Repeatable, standardised go/no‑go checking for small diameters The gauge is manufactured to DIN EN ISO 3650 and specified as Grade 1, which ensures tight tolerances for routine acceptance tests. In practice, this means the component checks are consistent with recognised international standards, reducing ambiguity in inspection results and supporting clear pass/fail decisions on the shop floor. The 1.39 mm nominal dimension denotes the calibrated contact size used for external diameter verification, providing a direct, reliable reference for production control. Durable construction reduces rework and downtime Made from hardened special steel, the gauge offers elevated resistance to wear during repeated engagements, which preserves dimensional integrity over time. The compact cross‑section of 30 × 9 mm (applicable for nominal sizes up to 10 mm) combines handling convenience with sufficient stiffness to avoid unwanted deformation during manual use. This robustness translates into fewer replacements, less unplanned downtime and a reduced need for corrective machining. Designed for practical workshop workflows The plain, unambiguous geometry of the gauge supports rapid tactile checks in assembly and inspection processes. The low mass (approx. 0.006 kg) and compact profile make it easy to integrate into fixture checks or to keep at the testing station for intermittent verification. Traceability is straightforward thanks to the SKU M319.0139.1 and GTIN 4054469130934, aiding inventory control and documentation within quality systems. Clear technical traceability for compliance and procurement The product is listed under the End gauges category and carries the customs tariff number 90173000, which simplifies procurement and customs handling. Supplied by Metav IndustryLine, the gauge benefits from Metav’s focus on accessible precision: a documented supply chain and a broad product portfolio make it easier to standardise inspection tools across multiple workstations or sites. The compact gauge supports efficient sample inspection and contributes to a measurable improvement in first‑pass quality. Contact Metav Werkzeuge for tailored advice on integrating this Metav IndustryLine end gauge into existing inspection routines and to arrange procurement from the Emmerich stock. Technical data SKU: M319.0139.1 GTIN: 4054469130934 Nominal dimension: 1.39 mm Standard: DIN EN ISO 3650 Grade: 1 Material: hardened special steel Weight: 0.006 kg Cross section: 30 × 9 mm (for nominal ≤ 10 mm) Tariff code: 90173000 Facts Nominal size: 1.39 mm Weight: 0.006 kg Cross section dimension: 30 x 9 mm Grade: 1 GTIN: 4054469130934 Features Conforms to DIN EN ISO 3650 Hardened for increased wear resistance Compact geometry for small‑diameter checks Category: End gauges Supplier range: Metav IndustryLine FAQ What tolerance class does this gauge represent? The gauge is supplied to Grade 1 tolerance according to DIN EN ISO 3650, which is suitable for standardised go/no‑go checks of small external diameters. Which material is the gauge made from? The tool is manufactured from hardened special steel, selected to maintain dimensional stability and wear resistance during frequent use. Is the item traceable for quality records? Yes. The product can be identified by SKU M319.0139.1 and GTIN 4054469130934 for documentation and stock management. For which applications is this end gauge intended? It is intended for tactile go/no‑go verification of small external diameters in production, assembly and maintenance workflows within metalworking and component inspection. Does the cross‑section suit small handheld checks? Yes. The cross‑section of 30 × 9 mm (for nominal sizes up to 10 mm) provides a balance of stiffness and ergonomic handling for manual inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.39mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of a ceramic reference that combines thermal stability and wear resistance with Grade 1 traceability to DIN 861/1; the compact 1.39 mm nominal size supports fine calibration tasks and repeatable inspection results. Order the gauge block directly via Metav Werkzeuge or consult our team for specification advice. Ceramic gauge block 1.39 mm, Grade 1 (DIN 861/1) — Metav IndustryLine Ceramic gauge block 1.39 mm, Grade 1 (DIN 861/1) is a precision length standard for calibration and inspection work that demands low thermal drift and long service life Ceramic material with excellent thermal stability Grade 1 accuracy to DIN 861/1 Nominal size 1.39 mm for micro calibration Lightweight and corrosion‑free construction Repeatable measurement through thermal stability and material choice The use of ceramic as the base material gives this gauge block exceptional thermal stability compared with common steel standards; temperature‑induced length changes are reduced, which supports consistent results in both workshop and laboratory ambient conditions. Specified as Grade 1 (DIN 861/1), the block serves as a reliable reference for routine calibration tasks and quality checks, enabling technicians to maintain control over dimensional tolerances without frequent rework. As a compact length standard, it is particularly suited to tasks where small increments and reproducibility are essential. Compact format that simplifies fine calibration workflows With its 1.39 mm nominal size and a low mass of 0.002 kg, this block is optimised for fine adjustment and calibration of micrometres, small callipers and optical comparators. The small footprint makes handling and fixture in tight inspection jigs straightforward while reducing the risk of overloading instruments during set‑up. The wear‑resistant and corrosion‑free nature of the ceramic surface extends service life and preserves the reference dimension over many measurement cycles, reducing downtime and total lifecycle cost compared with frequently replaced standards. Compatibility with common metrology processes and traceability The piece functions as a length standard compatible with established inspection chains and complements sets of gauge blocks or individual reference standards. Identification is ensured via SKU M324.001.39 and GTIN 4054469142760, which aids inventory and traceability in quality management systems. The compact geometry also lends itself to controlled storage in padded cases or tray systems used in calibration laboratories, limiting contact damage and preserving measurement integrity between calibrations. Procurement and operational benefits for production and quality control Choosing a ceramic gauge block of this specification reduces environmental sensitivity and maintenance needs, supporting efficient inspection routines and stable process control. The Metav IndustryLine designation indicates availability through a supplier that positions itself as a precision partner for industry and trade; combined with the block’s durability and conformity to DIN 861/1, the standard offers a pragmatic route to stable measurement references across assembly, tool setup and incoming inspection workflows. For assured dimensional standards, request the Metav IndustryLine ceramic gauge block (M324.001.39) via Metav Werkzeuge; phone +49 2822 7131930 or email info@metav-werkzeuge.com for product guidance and rapid procurement Technical data Article number: M324.001.39 GTIN: 4054469142760 Tariff number: 90173000 eClass: 21170108 Facts Nominal size: 1.39 mm Material: Ceramic Weight: 0.002 kg Grade: 1 (DIN 861/1) Special features Wear‑resistant material Corrosion‑free surface Compact format for micro calibration Category: Gauge block / End standard FAQ What applications suit a ceramic gauge block of this size? The ceramic gauge block 1.39 mm, Grade 1 (M324.001.39) is suited to micro calibration tasks, verification of small callipers and micrometres, and laboratory reference checks where low thermal drift and stable contact surfaces are required. How does Grade 1 (DIN 861/1) affect usability in production? Grade 1 conformity means the Ceramic gauge block 1.39 mm meets the standardised accuracy level for routine industrial inspection and calibration, making it appropriate for quality control across manufacturing and maintenance operations. Is a ceramic gauge block more durable than steel for everyday use? Ceramic offers high wear resistance and corrosion‑free performance; the Ceramic gauge block 1.39 mm preserves its reference length under frequent use and in non‑aggressive environments, typically reducing the need for replacement compared with untreated steel standards. How should the gauge block be stored to maintain its reference dimension? Store the gauge block M324.001.39 in a clean, dry tray or padded case, avoiding direct contact with contaminants and minimising handling to reduce surface wear and preserve accuracy between calibrations. Can this gauge block be integrated into a traceable quality system? Yes. The Ceramic gauge block 1.39 mm (SKU M324.001.39, GTIN 4054469142760) is identifiable for inventory records and traceability, supporting documentation within quality management and calibration systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.3mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of a compact ceramic reference that combines Grade 1 accuracy and excellent thermal stability for reproducible setting and verification tasks; order the length standard directly via Metav Werkzeuge or consult the Metav team for application advice. Ceramic gauge block 1.3 mm — Grade 1 length standard, DIN 861/1, Metav IndustryLine The Ceramic gauge block 1.3 mm serves as a high-stability reference length for calibration benches and precision setting in metrology and inspection. Grade 1 accuracy to DIN 861/1 Ceramic body for thermal stability Compact 1.3 mm nominal size Consistent reference for calibration and inspection Manufactured to Grade 1 tolerance under DIN 861/1, this compact length standard provides a stable, reproducible reference for setting micrometres, calibrating comparators and checking small features. The combination of a ceramic measuring surface and a precise nominal size of 1.3 mm reduces thermal drift during short-term handling, supporting faster measurement cycles and minimising uncertainty in routine checks. As a result, process control benefits from fewer adjustments and clearer pass/fail decisions. Easy handling that supports repeatable results The small form factor and minimal mass (approx. 0.002 kg) make the length standard straightforward to position in jigs and fixtures without inducing distortion. The fine dimensional tolerance and smooth faces permit secure seating against reference faces and gauge pins, enabling exact setting of instruments. The robust ceramic substrate helps maintain surface integrity under normal workshop use, so repeat measurements remain consistent and setup times are shortened—an efficiency gain for both production and quality departments. Durable material choice and practical traceability Ceramic construction offers inherent wear resistance and low susceptibility to corrosion compared with many metallic alternatives, which preserves the reference dimension over extended use. The block is supplied as a precise manufacturing standard with clear identification (GTIN and SKU) to support inventory and traceability in quality systems. For workshops and inspection rooms seeking a compact, reliable length standard, this item delivers a blend of stability, handling convenience and conformity to industry practice. For calibration-grade ceramic length standards and expert guidance, contact Metav Werkzeuge GmbH in Emmerich — Metav Werkzeuge can advise on suitability, supply the gauge block and assist with delivery arrangements, info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: M324.001.3 GTIN: 4054469142678 Material: Ceramic Nominal size: 1.3 mm Grade: 1 (DIN 861/1) Weight: 0.002 kg Tariff number: 90173000 Category: Gauge blocks (Endmasse) Core technical data Nominal size: 1.3 mm Weight: 0.002 kg Accuracy grade: 1 GTIN: 4054469142678 Tariff number: 90173000 Special features Material: Ceramic Standard: DIN 861/1 Category: Gauge blocks (Endmasse) Manufacturer brand: Metav IndustryLine FAQ What is this gauge block used for? The Ceramic gauge block 1.3 mm is intended as a reference length for calibration, instrument setting and comparative inspection tasks in metrology environments. How precise is the length standard? The block is manufactured to Grade 1 tolerance in accordance with DIN 861/1, providing a stable reference suitable for routine calibration and setting operations. Is the gauge block supplied with a calibration certificate? The product is supplied as a precision length standard; calibration options and certificates can be arranged on request through Metav Werkzeuge if traceable documentation is required. How should the ceramic block be handled and stored? Handle the block carefully to avoid impact against hard edges, keep contact surfaces clean and store in a dry, dust-free container when not in use to preserve surface integrity and dimensional stability. Can this gauge block be used alongside metallic reference standards? Yes, the ceramic block complements metallic standards where low thermal expansion and wear resistance are required; comparisons are commonly performed on a stable bench under controlled conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.4 mm Gauge Block Single End, Grade 0, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
The combination of DIN EN ISO 3650 Grade 0 accuracy, hardened special steel construction and a compact 1.4 mm nominal length delivers a reliable reference standard for calibration and inspection tasks; order this precision gauge directly via Metav Werkzeuge or consult our specialists for specification advice. Single gauge block 1.4 mm — Grade 0 reference, hardened special steel The Single gauge block 1.4 mm serves as a Grade 0 reference length for precision laboratories and quality-control benches, intended for traceable calibration and the creation of exact measurement stacks in metrology environments. Grade 0 accuracy to DIN EN ISO 3650 Hardened special steel construction Compact cross-section 30 x 9 mm Reference length 1.4 mm for calibration Traceable accuracy for laboratory and workshop use This end measure is manufactured to DIN EN ISO 3650 and specified as Grade 0, offering a high level of dimensional fidelity suitable for laboratory standards and calibration benches. As a reference element, the block provides a stable baseline for comparative measurements and for building precise gauge stacks; the conformity to the international standard supports traceability in documented measurement chains and eases integration into quality systems. Robust material for consistent service life Made from hardened special steel, the block combines dimensional stability with resistance to wear under normal handling. The heat-treated material reduces surface deformation during repeated wringing and contact, maintaining the reference length over time. This durability translates into fewer replacements and dependable repeatability for routine inspection and calibration tasks. Compact geometry for practical handling and stacking With a practical cross-section of 30 x 9 mm for nominal sizes up to 10 mm and a low mass of approximately 0.006 kg, the reference block is easy to position and to incorporate into existing sets. The compact form factor assists in accurate alignment when forming stacks of gauge blocks, allowing technicians to assemble prescribed lengths quickly while minimising handling-related errors. Ready for measurement processes and documentation The block's nominal size of 1.4 mm makes it a useful element for fine adjustments and the verification of precise micrometre and comparator settings. As a standardized reference, it supports consistent documentation of inspection results and streamlines routine quality-control sequences, helping to maintain throughput without compromising the repeatability required for critical components. For a reliable Grade 0 reference, contact Metav Werkzeuge to secure the Metav IndustryLine single gauge block M319.014.0 and discuss delivery and spec confirmation by email at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: M319.014.0 GTIN: 4054469130941 Norm: DIN EN ISO 3650 Nominal dimension: 1.4 mm Tolerance grade: 0 Weight: 0.006 kg Facts Cross-section (applicable): 30 x 9 mm Tariff number: 90173000 Category: End measure Material: Special steel, hardened Special features Reference standard suitable for calibration Compact geometry for stacking and handling Grade 0 precision for high-fidelity measurements Manufacturer brand: Metav IndustryLine FAQ What standard and tolerance does this gauge meet? This single gauge block conforms to DIN EN ISO 3650 and is supplied to Grade 0 tolerance; it is listed as SKU M319.014.0. What material is the block made from? The gauge is manufactured from hardened special steel, chosen for dimensional stability and resistance to wear during routine use. What are the block’s dimensions and mass? Nominal length is 1.4 mm with an applicable cross-section of 30 x 9 mm, and a mass of approximately 0.006 kg. For which applications is this reference block suitable? The block is intended as a laboratory-grade reference for calibration, precise inspection tasks and for forming gauge stacks to generate exact measurement lengths. Can this block be wrung and used in combination with other blocks? Yes; the block is designed for combination with compatible gauge blocks to form accurate reference lengths in accordance with the DIN EN ISO 3650 practice Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.4 mm Gauge Block, Hardened Special Steel, DIN EN ISO 3650 Grade 1 - Metav IndustryLine
Take advantage of the combination of DIN EN ISO 3650 conformity, Grade 1 accuracy and a hardened special steel construction for reliable reference measurements and stable workshop use; order the gauge block directly via Metav Werkzeuge or ask the consultants if needed. Gauge block 1.4 mm (DIN EN ISO 3650, Grade 1) – Metav IndustryLine The gauge block 1.4 mm is a precision length standard designed for calibration, setting and verification tasks in laboratory and workshop metrology, offering a compact and stable reference for instruments and gauges. *Gauge block 1.4 mm, DIN EN ISO 3650 Grade 1 *Hardened special steel for long-term stability *Rectangular cross-section: up to 10 mm 30x9 mm *Lightweight: approx. 0.006 kg for easy handling High-accuracy reference that supports dependable measurements The block serves as a certified length reference compatible with standard metrology procedures. Manufactured to DIN EN ISO 3650, the component meets the demands of Grade 1 tolerances and therefore provides a clearly defined accuracy class for instrument setting and comparison. As a length standard, it reduces uncertainty in routine checks and helps maintain production quality by supplying a reproducible dimension for gage blocks, slip gauges and comparator setups. The compact nominal size 1.4 mm makes this item particularly useful where small, precise steps are required in calibration chains. Robust construction for sustained repeatability in daily use Constructed from hardened special steel, the block sustains repeated handling and contact with measuring instruments while preserving surface condition and dimensional stability. The rectangular cross-section (30×9 mm for sizes up to 10 mm; 35×9 mm above 10.1 mm) ensures secure seating on measurement tables and stable stacking with other blocks, which reduces the risk of tilting or misalignment during use. The low mass (weight 0.006 kg) aids quick manipulation without sacrificing the stiffness necessary for accurate contact measurements, so the component integrates well into both handheld and bench-mounted calibration routines. Practical traceability and integration into quality processes Compliance with DIN EN ISO 3650 simplifies documentation and process integration: the block is identifiable in purchasing and inspection workflows and can be referenced in quality plans and inspection reports. The item’s GTIN and SKU support inventory control and rapid identification in purchasing and storage systems. For users building a reference set or replacing worn standards, the combination of standard conformity, compact dimension and robust material provides an efficient path to consistent measurement practice and reduced rework rates. For traceable precision from Metav IndustryLine, request delivery and documentation from Metav Werkzeuge in Emmerich—call +49 2822 7131930 or email info@metav-werkzeuge.com to arrange supply and additional product information Technical data SKU: M319.014.1 GTIN: 4054469130958 Norm: DIN EN ISO 3650 Label: Gauge block 1.4 mm, DIN EN ISO 3650, Grade 1 Facts Nominal size: 1.4 mm Weight: 0.006 kg Cross-section: up to 10 mm → 30 x 9 mm; from 10.1 mm → 35 x 9 mm Tariff number: 90173000 Special features Material: special steel, hardened Accuracy class: Grade 1 Category: Endmasse / Gauge blocks Intended use: reference length standard for calibration and setting FAQ What accuracy class does the gauge follow? The gauge block conforms to DIN EN ISO 3650 and is manufactured to Grade 1 tolerance, providing a standardised accuracy level suitable for reference and calibration tasks. Which material is used and how does it affect durability? Made from hardened special steel, the block offers wear resistance and dimensional stability under normal calibration handling, supporting repeatable measurements over time. For which applications is this length standard suitable? This compact length standard is intended for instrument setting, comparator checks and inclusion in gauge block stacks for precision workshops and metrology laboratories. What are the dimensions and handling considerations? The nominal size is 1.4 mm; the rectangular cross-section is 30×9 mm for sizes up to 10 mm and 35×9 mm above 10.1 mm. Its low mass (0.006 kg) facilitates rapid handling and stacking. How is the product identified for inventory and ordering? Identification is possible via SKU M319.014.1 and GTIN 4054469130958, which assist in procurement, stock management and traceable documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.4/2.5/5.1/7.7/10.3/12.9/15.0/17.6/20.2/22.8/25.0 Gauge Block Set For Micrometer Calibration, Hardened Steel DIN EN ISO 3650/1
Combine standards-compliant verification, hardened special-steel construction, and a compact protective case to secure repeatable micrometer checks and a smooth calibration workflow. Order the M318.202 end gauge set directly via Metav Werkzeuge or ask the consultants for application advice. End Gauge Set M318.202 — 11-piece Micrometer Test Gauges, DIN EN ISO 3650/1, Metav IndustryLine The End Gauge Set M318.202 delivers a compact range of standardised end measures for reliable micrometer verification in calibration labs and metalworking workshops. DIN EN ISO 3650/1 compliant verification set Hardened special steel for dimensional stability Supplied in protective transport case Verification aligned with international standards for dependable results The set is manufactured to DIN 863 and DIN EN ISO 3650/1, providing a traceable reference for verifying micrometer accuracy. Compliance with these standards means the gauges serve as objective baseline measures during routine checks and spot audits, simplifying conformity assessments and internal quality control. By using standardised end measures, workshops can document measurement uncertainty more consistently, which contributes to fewer reworks and clearer acceptance criteria in production and inspection processes. Robust construction for repeatable measurements Each gauge is made from special steel, which has been aged and hardened to resist wear and to maintain form over repeated use. That material choice reduces dimensional drift and preserves reference accuracy under normal workshop handling. The compact design and mass distribution support stable seating against micrometer anvils, limiting twist or misalignment during the verification step. A protective transport case protects the set in transit and on the bench, ensuring the gauges remain ready for repeat measurement routines. Set composition that covers common micrometer ranges The set comprises 11 gauges that cover the range 1.4 mm–25.0 mm in defined steps (1.4, 2.5, 5.1, 7.7, 10.3, 12.9, 15.0, 17.6, 20.2, 22.8, 25.0), enabling staged verification across frequently used micrometer sizes. These increments allow technicians to check individual micrometer settings or to validate a series of instruments efficiently with minimal handling. The compact selection reduces the need for multiple specialist tools and supports faster inspection cycles within production or calibration labs. Practical features for workshop integration and supply reliability At about 0.8 kg in total, the set is portable and simple to store, while remaining robust enough for routine workshop use. The product is identified by SKU: M318.202 and GTIN: 4054469127989, which aids inventory management and traceability. Sourced through Metav IndustryLine, the set benefits from Metav’s European stock and distribution setup, which acts as a quality filter for customers seeking consistent supply and technical backing for precision measuring equipment. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the M318.202 end gauge set into existing calibration routines and for delivery details Technical Data Article number: M318.202 GTIN: 4054469127989 Tariff number: 90173000 Pieces per set: 11 Weight: 0.8 kg Data Sizes (mm): 1.4, 2.5, 5.1, 7.7, 10.3, 12.9, 15.0, 17.6, 20.2, 22.8, 25.0 Measurement task: Micrometer verification Category: End gauges / End measures Special features Material: Special steel, aged and hardened Standards: DIN 863; DIN EN ISO 3650/1 Delivery: Protective transport case included Set type: End gauge set for micrometer testing SKU: M318.202 FAQ How is the set used to verify a micrometer? The end gauge set is placed between the micrometer anvils at the intended measuring point and the instrument is adjusted or checked against the known gauge dimension; the M318.202 provides fixed reference dimensions for each check. Does the product include a calibration certificate? The product information does not specify a supplied calibration certificate; please confirm certificate requirements with Metav Werkzeuge if traceable documentation is required for your quality system. Which sizes are included in the set? The set contains 11 gauges covering 1.4 mm, 2.5 mm, 5.1 mm, 7.7 mm, 10.3 mm, 12.9 mm, 15.0 mm, 17.6 mm, 20.2 mm, 22.8 mm and 25.0 mm to support staged micrometer checks. What material and standards apply to the gauges? The gauges are manufactured from special steel that has been aged and hardened, and they conform to DIN 863 and DIN EN ISO 3650/1 for end measures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.4/2.5/5.1/7.7/10.3/12.9/15.0/17.6/20.2/22.8/25/50/75/100 Gauge Block Set, Hardened Steel, DIN EN ISO 3650/1, Case
Take advantage of a DIN EN ISO 3650/1‑compliant verification set combined with hardened, aged special steel for stable long‑term accuracy; the compact range up to 100 mm keeps routine checks efficient and reproducible. Order the gauge set directly via Metav Werkzeuge or consult our product specialists for application advice. End-gauge set M318.203 – Master gauge set for micrometer verification (Metav IndustryLine) The End-gauge set M318.203 is a precision set for the verification of micrometers according to DIN EN ISO 3650/1, designed for routine calibration and quality control in workshops and inspection rooms. DIN EN ISO 3650/1 compliant gauges Hardened special steel for dimensional stability Complete range up to 100 mm for fast verification Ensure measurement consistency across production The set supports reliable verification of small measuring instruments, providing a clearly defined reference across critical sizes up to 100 mm. Built to the standards of DIN EN ISO 3650/1 and DIN 863, the gauges give a traceable baseline for adjustment and inspection tasks; this reduces downtime caused by uncertain measurements and shortens decision cycles in quality control. With stable master values, routine checks become faster and more defensible in audits, so inspection processes run with measurable efficiency. Robust materials for long‑term repeatability Manufactured from special steel, aged and hardened, the set resists wear and maintains surface integrity under frequent use. The choice of material improves thermal and mechanical stability, which directly reduces drift between verification intervals and extends the service life of the reference set. A hardened finish also minimises surface damage during handling, meaning that repeat measurements remain consistent and the need for early replacement is diminished. Practical scope and workshop convenience The collection covers a practical progression of sizes from the low‑micrometre range up to 100 mm, enabling verification of most hand and bench micrometers without constant tool changes. Delivered as a ready set, the gauges are easy to store and transport within inspection areas, keeping test routines simple and reproducible. At a total weight of about 1.3 kg, the set is compact enough for bench use while remaining substantial enough to feel robust in daily operations. For traceable measurement and dependable on‑bench verification, contact Metav Werkzeuge to discuss the End‑gauge set M318.203 and arrange delivery from our Emmerich quality hub. Technical data Article number: M318.203 GTIN: 4054469128009 Tariff number: 90173000 Core specifications Weight: 1.3 kg Pieces per set: 14 Size range (mm): 1.4, 2.5, 5.1, 7.7, 10.3, 12.9, 15.0, 17.6, 20.2, 22.8, 25.0, 50, 75, 100 Special features Material: Special steel, aged and hardened Standards: DIN 863; DIN EN ISO 3650/1 Application: Reference gauges for micrometer verification Set configuration: Master gauge set for workshop and inspection use FAQ What standards does the set meet? The End‑gauge set M318.203 meets DIN EN ISO 3650/1 and DIN 863, ensuring compatibility with common workshop and inspection routines. Is the set suitable for workshop calibration of hand micrometers? Yes, the Metav IndustryLine master gauges are intended for routine verification and adjustment of hand and bench micrometers up to 100 mm. What material are the gauges made from? The gauges are manufactured from special steel, aged and hardened, chosen to provide wear resistance and dimensional stability under regular use. How many gauges are included and which sizes are covered? The set contains 14 gauges covering a practical progression of sizes from 1.4 mm through to 100 mm for broad applicability in verification tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.41 mm End Gauge Single Plate Grade 0 DIN EN ISO 3650 Hardened Special Steel - Metav IndustryLine
The combination of DIN EN ISO 3650 conformity, Grade 0 tolerance and a hardened special‑steel construction ensures reliable reference measurements and long service life; these characteristics support consistent quality control and efficient inspection routines. Order the (gauge block 1.41 mm) directly via (Metav Werkzeuge) or ask our consultants if needed. Gauge block 1.41 mm — End gauge, Grade 0, hardened special steel (Metav IndustryLine) The gauge block 1.41 mm serves as a high‑precision reference standard for dimensional inspection and calibration tasks in metrology laboratories and precision workshops. DIN EN ISO 3650 standard Grade 0 tolerance for high accuracy Hardened special steel construction Nominal size 1.41 mm reference Accurate reference that supports repeatable inspection results The gauge block 1.41 mm is manufactured to DIN EN ISO 3650, providing a stable reference for calibration and inspection procedures where repeatability is essential. The Grade 0 specification indicates a tight manufacturing tolerance suited to demanding quality control tasks; as a result, laboratories and toolrooms benefit from reduced measurement uncertainty and clearer pass/fail decisions. This focused reliability shortens diagnosis cycles and improves process control during production runs. Durable design that eases handling and storage Constructed from hardened special steel, this end gauge combines wear resistance with a compact form factor that is easy to manipulate during wringing and stacking operations. The cross‑section for sizes up to 10 mm is 30 x 9 mm, a geometry that balances stiffness and grip for stable measurements; the low mass (approx. 0.006 kg) reduces handling fatigue when assembling sets or performing repeated checks. The robust finish supports longevity in everyday workshop environments while maintaining the dimensional integrity required of a reference standard. Integrates into inspection workflows and inventory systems Supplied as a single reference element within the Endmasse category, the item is traceable by SKU M319.0141.0 and GTIN 4054469130965, facilitating inventory control and document management. The compact reference size makes it suitable for inclusion in comparison jigs, gauge sets, and gage blocks racks where compact, certified standards are required. Using standardised blocks like this simplifies audit trails and helps to harmonise measurement procedures across shifting production contexts. For traceable, workshop‑ready reference standards request delivery and logistic details from Metav Werkzeuge in Emmerich to ensure seamless integration of the M319.0141.0 into existing calibration routines. Technical Data Article number: M319.0141.0 GTIN: 4054469130965 Category: Endmasse (gauge blocks) Norm: DIN EN ISO 3650 Grade: 0 Facts Nominal size: 1.41 mm Weight: 0.006 kg Cross-section (≤10 mm): 30 x 9 mm Customs tariff number: 90173000 Special features Material: hardened special steel Manufacturer: Metav IndustryLine Intended use: reference standard for dimensional inspection and calibration FAQ What does Grade 0 mean for this gauge block? Grade 0 denotes a narrow manufacturing tolerance under DIN EN ISO 3650, making the M319.0141.0 suitable for high‑accuracy reference comparisons in inspection and calibration tasks. Is this gauge block suitable for laboratory reference use? Yes. The gauge block 1.41 mm is produced to the DIN standard and its Grade 0 accuracy makes it appropriate as a laboratory reference or for precision workshop quality control. What material is used and why does it matter? This end gauge is made from hardened special steel, chosen for wear resistance and dimensional stability, which helps retain reference values during regular handling and stacking operations. How is the gauge block identified in stock and documentation? Identification is via the article number M319.0141.0 and GTIN 4054469130965, allowing straightforward inclusion in asset registers and calibration records. Can this block be combined with other gauge blocks for composite measurements? Yes, the geometry and surface finish allow wringing and stacking with other standard gauge blocks to build composite reference lengths for inspection and set‑up tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.41mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
For reliable reference measurements in quality control, choose the combination of Grade 1 DIN 861/1 accuracy and ceramic thermal stability to reduce measurement drift and ensure repeatable results; order the item directly via Metav Werkzeuge or consult their specialists for integration into existing reference sets. Ceramic gauge block 1.41 mm, Grade 1 (DIN 861/1) — Metav IndustryLine precision reference The Ceramic gauge block 1.41 mm, Grade 1 (DIN 861/1) is a compact, high-stability reference element intended for laboratory and workshop length standards, metrology benches and calibration routines. Ceramic construction for thermal stability Grade 1 accuracy according to DIN 861/1 Nominal length 1.41 mm for precise reference Compact and lightweight at 2 g Consistent reference accuracy for routine metrology Made from ceramic, this gauge block delivers excellent dimensional stability and resistance to wear compared with many metallic alternatives. Its Grade 1 classification under DIN 861/1 signifies a reproducible tolerance band suitable for workshop and production control applications where a precise fixed length is required. The nominal length of 1.41 mm provides a specific reference point ideal for stacking in comparison sets or for use in dedicated measurement fixtures. Emphasis on material stability reduces thermal expansion effects, which supports repeatable readings in temperature-controlled environments. Practical handling and integration into inspection routines The small form factor and lightweight construction make handling straightforward during set assembly and when performing frequent comparisons. Although compact, the block is designed to function as a stable reference standard within calibration chains and bench checks; its minimal mass (approx. 2 g) reduces the load on delicate fixtures and prevents undue wear on contact tips. For traceable processes, the nominal size is simple to document and to combine with other reference elements when building a traceable length hierarchy on the shop floor or in a laboratory. Durability, traceability and workshop suitability Ceramic gauge blocks are valued for their surface hardness and resistance to corrosion, attributes that prolong service life under normal metrology use. The Metav IndustryLine designation indicates a product aimed at democratizing precision for workshops and specialist suppliers, providing a reliable reference without unnecessary complexity. Identification marks such as the SKU and GTIN simplify inventory control and documentation in quality management systems, ensuring the block can be referenced unambiguously in certificates, inspection reports and order lists. For Metav IndustryLine products, contact Metav Werkzeuge in Emmerich for availability, delivery options and advice on integrating this ceramic gauge block into existing reference sets Technical data Article number: M324.001.41 GTIN: 4054469142784 Tariff number: 90173000 Facts Nominal length: 1.41 mm Material: Ceramic Grade: 1 (DIN 861/1) Weight: 0.002 kg Special features Category: Gauge blocks (Endmasse) Intended use: Reference standard for length measurement Manufacturer range: Metav IndustryLine FAQ What level of accuracy does this ceramic gauge block provide? The ceramic gauge block offers Grade 1 accuracy pursuant to DIN 861/1, making it suitable for reliable workshop and production-control reference measurements. Is the material suitable for long-term use in a workshop environment? Yes, the ceramic construction provides high surface hardness and corrosion resistance, which supports long-term dimensional stability under normal metrology handling. Can this block be combined with other reference elements? The 1.41 mm nominal length is intended for use in stacked reference sets and comparison chains; it integrates readily with other gauge blocks to form traceable length hierarchies. What identifiers should be used when ordering or logging the item? Use the SKU M324.001.41 and the GTIN 4054469142784 for unambiguous ordering and traceability in documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.41mm Gauge Block Grade 1, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
Take advantage of DIN EN ISO 3650 conformity, Grade 1 accuracy and a hardened special steel construction for dependable reference measurements; order the gauge block directly via Metav Werkzeuge or ask our consultants if needed. Gauge block 1.41 mm (DIN EN ISO 3650), Grade 1 — Metav IndustryLine A gauge block 1.41 mm serving as a compact, high‑precision length reference for calibration benches and quality control in machine shops and metrology labs. DIN EN ISO 3650 Grade 1 accuracy Hardened special steel construction Compact 1.41 mm reference gauge Suitable for laboratory and workshop standards Reliability and conformity for traceable length standards As a precision length standard compliant with DIN EN ISO 3650, this slip gauge provides a stable reference that supports repeatable measurements and instrument verification. The Grade 1 designation signals a high level of manufacturing control and surface finish that is well suited for calibration tasks and comparative checks. Using a certified reference minimises uncertainty in routine checks and aids conformity with inspection protocols. Durable material and consistent performance over time Manufactured from hardened special steel, the block combines high wear resistance with dimensional stability, making it suitable for regular use as a workshop reference or as part of a gauge set. The compact form and low mass (approx. 0.006 kg) reduce handling strain while preserving stiffness at the contact faces. This material choice reduces the need for frequent replacement and maintains measurement integrity across many cycles. Practical handling, integration and benefit for workflows The small footprint and standardised dimensions make the block easy to store in common gauge trays and to integrate into existing measurement routines. As a certified reference component, it supports rapid comparative checks on micrometres, verniers and small-height gauges, reducing machine downtime and accelerating quality decisions. The clear conformity to international standards simplifies documentation and audit trails for production control. Contact Metav Werkzeuge for personalised advice on integrating Metav IndustryLine gauge blocks into calibration routines and for reliable supply from Emmerich to your workshop Technical Data Article number: M319.0141.1 GTIN: 4054469130972 Label: Endmaß 1,41 mm, DIN ISO 3650, Güte 1 DIN ISO 3650 Facts Nominal length: 1.41 mm Weight: 0.006 kg Cross-section: up to 10 mm — 30 x 9 mm; from 10.1 mm — 35 x 9 mm Tariff number: 90173000 Standard: DIN EN ISO 3650 Special features Material: Special steel, hardened Grade: 1 Category: Gauge block / end gauge Manufacturer brand: Metav IndustryLine FAQ What level of accuracy does this gauge block provide? The Metav IndustryLine gauge block 1.41 mm is manufactured to Grade 1 under DIN EN ISO 3650, providing a high‑precision reference suitable for calibration and comparative checks. Can this block be used in a standard gauge set for workshop calibration? Yes, the compact dimensions and standardised cross-section make the gauge block appropriate for inclusion in gauge sets and for routine workshop verification with micrometres and calipers. What is the material and how does it affect wear? The block is made of hardened special steel, which offers enhanced wear resistance and dimensional stability for repeated contact and long service life. Is the nominal length of 1.41 mm suitable for fine measurements? A nominal length of 1.41 mm serves as a precise small‑length standard for checking fine tolerances and for use in comparative calibration of small instruments. How does the block assist with measurement traceability? As a standard produced to DIN EN ISO 3650, the gauge block supports traceable measurement procedures and simplifies documentation for quality systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.42 mm Gauge Block Single End, Hardened Special Steel, DIN EN ISO 3650 Grade 0 - Metav IndustryLine
Combine Grade 0 accuracy, hardened special steel and a compact 1.42 mm nominal size to ensure repeatable reference measurements and reliable calibration results; order the gauge block directly via Metav Werkzeuge or contact our consultants for technical guidance. Gauge block 1.42 mm — Grade 0, DIN EN ISO 3650 A compact gauge block for precision calibration and verification tasks in metrology labs and quality control environments. Grade 0 accuracy (DIN EN ISO 3650) Hardened special steel construction Compact 1.42 mm nominal size Traceable precision for calibration tasks The Grade 0 classification according to DIN EN ISO 3650 guarantees a level of accuracy suitable for calibration benches and inspection tasks where tight dimensional control is required. The nominal size of 1.42 mm provides a reliable reference for setting micrometres, vernier callipers and other length standards. Using a standardised grade simplifies routine checks and ensures comparability across instruments and shifts, so measurement procedures remain consistent and auditable. Durable material and controlled geometry for repeatability Manufactured from hardened special steel, the block delivers stability under repeated use and resists surface wear that would otherwise introduce error. The specified cross-section dimensions (30×9 mm for smaller sizes, 35×9 mm for larger standards) offer a stable contact area that minimises tilting and facilitates secure stacking. The low mass (0.006 kg) and compact footprint make handling straightforward while preserving the flatness and parallelism required of a reference standard. Practical integration into inspection workflows As a standard-compliant reference piece, the block suits workshops, calibration labs and production inspection points where quick, reproducible checks are needed. Its nominal measurement aids in setting up comparators, confirming tool offsets and verifying sensor calibration. For inventory and traceability, the product is supplied with the manufacturer SKU and GTIN, allowing straightforward recording in quality management systems and certificates of conformity. For traceable calibration and dependable precision, contact Metav Werkzeuge in Emmerich for purchase or technical advice — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 — or request assistance from our specialists to confirm suitability for specific measurement chains. Technical data Article number: M319.0142.0 GTIN: 4054469130989 Norm: DIN EN ISO 3650 Nominal size: 1.42 mm Material: Special steel, hardened Weight: 0.006 kg Tariff code: 90173000 Facts Nominal size: 1.42 mm Accuracy grade: 0 (DIN EN ISO 3650) Cross-section: 30×9 mm (≤10 mm sizes) / 35×9 mm (>10.1 mm) Category: Gauge blocks (end gauges) Special features Hardened special steel for wear resistance Conforms to DIN EN ISO 3650 Compact design for integration into calibration sets Suitable for verification and reference measurements FAQ What accuracy class does this gauge block have? The gauge block is manufactured to Grade 0 in accordance with DIN EN ISO 3650, providing a standard reference accuracy for calibration and inspection tasks. Which material is used for the block and why? The block is made from hardened special steel, chosen for its wear resistance and dimensional stability, ensuring long-term reproducibility of reference measurements. Is this gauge block suitable for setting micrometres and callipers? Yes, the 1.42 mm gauge block from Metav IndustryLine is intended for that purpose and serves as a reliable reference when setting and checking micrometres, digital callipers and similar instruments. How does the cross-section affect handling and stacking? The specified cross-section (30×9 mm for smaller sizes, 35×9 mm for larger standards) provides stable contact faces that reduce tilt during stacking and ease handling during routine checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.42mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Taking advantage of Grade 1 DIN 861/1 accuracy and the low thermal expansion of ceramic, this compact reference delivers stable, long‑term dimensional control for laboratory and workshop settings; order the Ceramic gauge block 1.42 mm, Grade 1 DIN 861/1 directly via Metav Werkzeuge or consult the sales team for application advice. Ceramic gauge block 1.42 mm, Grade 1 DIN 861/1 — compact, stable reference for precision work A ceramic reference gauge block designed for high‑precision length standards and recurring calibration tasks in metrology and quality control. Grade 1 accuracy (DIN 861/1) Ceramic construction for thermal stability Compact 1.42 mm reference length Lightweight 2 g for easy handling Dependable accuracy for routine and laboratory use The gauge block offers Grade 1 conformity to DIN 861/1, which denotes a high standard of dimensional accuracy suitable for workshop calibration benches and laboratory reference sets. Manufactured from ceramic, the block benefits from inherently low thermal expansion and excellent surface hardness, which together preserve the nominal dimension over repeated use. Such stability reduces measurement drift and supports reproducible results when comparing master standards or setting up inspection fixtures. Thermal and mechanical stability that reduces uncertainty Because the component is produced in ceramic, thermal influence on the reference length is minimised compared with many metallic standards; this results in smaller temperature‑related length variation during short handling periods. The material's wear resistance maintains the measuring faces and thus the reference length, extending the service life of the standard and reducing the need for frequent rework of gauge sets. The 1.42 mm nominal dimension provides a compact, precise datum that integrates easily into comparator stacks or as a discrete reference for small features. Practical handling and traceability in production environments The small mass and compact geometry make the block easy to position and align on inspection tables or in gauge sets. Supplied as SKU M324.001.42, this reference is suitable where a durable, stable, and lightweight length standard is required. As a precisely manufactured component within the "Endmasse" category, it complements larger gauge sets and serves well in toolrooms, inspection labs and small‑parts assembly where repeatable short‑range standards are essential. Choose Metav IndustryLine’s ceramic reference for robust stability and precise routine calibration — contact Metav Werkzeuge in Emmerich for supply and technical guidance Technical data Article number: M324.001.42 GTIN: 4054469142791 Tariff number: 90173000 Manufacturer: Metav IndustryLine Facts Nominal length: 1.42 mm Material: Ceramic Grade: 1 (DIN 861/1) Weight: 0.002 kg Special features Compact reference gauge block Low thermal expansion material Suitable for precision comparison and calibration Category: Endmasse FAQ What tolerance class does this gauge block meet? The Ceramic gauge block 1.42 mm, Grade 1 DIN 861/1 meets Grade 1 tolerances as specified in DIN 861/1, providing a reliable high‑precision reference for everyday workshop and laboratory use. Is the material suitable for long‑term use on bench and in sets? Yes, the ceramic construction offers good wear resistance and low thermal expansion, making the gauge block a durable choice for repeated handling and inclusion in gauge sets. Can this block be used as a master for small parts inspection? The compact 1.42 mm reference length is ideal as a master standard for small features and comparator checks where a short, stable datum is required. What is the product code for ordering? Order using SKU M324.001.42; this identifies the ceramic reference block with the 1.42 mm nominal length and Grade 1 specification. How does ceramic compare with steel for gauge blocks? Ceramic typically exhibits lower thermal expansion and strong surface hardness, which helps maintain the nominal dimension under frequent use; this makes it especially useful for small, critical reference lengths. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.42mm Gauge Block, Grade 1, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
Take advantage of a precision reference compliant with DIN EN ISO 3650, combined with hardened special steel for long-lasting wear resistance; the compact section makes it suitable for confined measuring points. Order the gauge directly via Metav Werkzeuge or consult Metav's specialists for application advice. End gauge 1.42 mm — End measure, DIN EN ISO 3650 Grade 1 (Metav IndustryLine) A End gauge 1.42 mm serving as a stable reference for workshop checks and setting small measuring instruments in precision engineering and quality control. DIN EN ISO 3650 Grade 1 compliance Nominal size 1.42 mm for precise reference Hardened special steel construction Compact cross-section for confined spaces Stable reference for routine checks and instrument setting The gauge is manufactured to DIN EN ISO 3650 and Grade 1 tolerances, providing a reliable reference for routine verification and instrument setting. As a nominal 1.42 mm standard, it functions as a fixed-length master that reduces uncertainty when calibrating small measuring devices or setting micrometre anvils. The adherence to this standard supports consistent results across repeated checks and simplifies documentation in quality procedures. Durable construction for repeated workshop use Made from hardened special steel, the end measure offers high wear resistance and dimensional stability under normal workshop conditions. The material choice minimises profile wear during contact with anvils or workpieces, extending the service life of the reference. The compact mass (approx. 0.006 kg) and robust finish ensure the gauge remains a dependable tool for frequent go/no-go verification or comparative measurements in production environments. Compact cross-section for access to tight features With a 30 × 9 mm cross-section for nominal sizes up to 10 mm, the design provides access to narrow grooves and small assemblies where bulkier standards would not fit. The reduced profile aids measurement of inner features or close-packed components while maintaining a stable seating surface. This combination of slender geometry and a stable form factor makes the standard suited to precision workshops and maintenance benches where space is limited. Traceable conformity that supports quality systems Supplied as an end standard conforming to recognised norms, the device supports traceability and documentation requirements within quality management systems. Using a standard produced to DIN EN ISO 3650 helps to align measurement procedures with recognised tolerance classes, facilitating audits and routine inspections. The clear specification of grade and nominal size streamlines the integration of the gauge into existing calibration routines. For traceable, compact reference standards from Metav IndustryLine choose this Grade 1 end gauge and contact Metav Werkzeuge for technical guidance and reliable delivery from Emmerich. Technical Data Article number: M319.0142.1 GTIN: 4054469130996 Weight: 0.006 kg Nominal size: 1.42 mm Standard: DIN EN ISO 3650 Grade: 1 Tariff number: 90173000 Core specifications Material: Special steel, hardened Cross-section (≤ 10 mm): 30 × 9 mm Cross-section (≥ 10.1 mm): 35 × 9 mm Additional features Category: End gauges (End measures) Eclass: 21170108 SKU: M319.0142.1 FAQ What tolerance class does this end gauge meet? This end gauge meets Grade 1 tolerances according to DIN EN ISO 3650, providing a recognised level of conformity for workshop reference standards. Is the nominal size of the gauge suitable for small instrument setting? Yes, the 1.42 mm nominal size is designed for precise setting and comparative checks of small measuring instruments and micrometres. What material is used and how does it affect durability? The gauge is made from hardened special steel, which offers increased wear resistance and dimensional stability for repeated use in production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.43 mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Combine the ceramic construction, Grade 1 accuracy (DIN 861/1) and the exact 1.43 mm nominal size to secure a stable, wear‑resistant reference in any calibration workflow; order directly via Metav Werkzeuge or consult our sales team for application advice. Ceramic End Gauge 1.43 mm, Grade 1 (DIN 861/1) – Metav IndustryLine A Ceramic End Gauge 1.43 mm, Grade 1 (DIN 861/1) that delivers a compact, thermally stable reference for dimensional verification and laboratory calibration. Ceramic construction for thermal stability Grade 1 accuracy per DIN 861/1 Nominal size 1.43 mm for reference standards Stable reference for precise dimensional control The ceramic body provides a low‑drift reference that supports repeatable measurements in quality control and laboratory environments. With Grade 1 specification according to DIN 861/1, the block serves as a reliable reference standard for calibrating micrometres, calipers and other precision instruments. The compact nominal dimension of 1.43 mm makes it particularly useful for assessing instrument linearity and small‑gap measurement performance without adding bulk to the calibration set. Robust material reduces wear and thermal influence Made from high‑performance ceramic, the gauge offers improved wear resistance and reduced susceptibility to surface deformation compared with many metallic gauges. The material’s inherent thermal properties result in greater stability during short‑term temperature fluctuations typical in workshop and laboratory settings, aiding consistent measurement results. This stability supports efficient calibration cycles and minimises rework, contributing to measurable process reliability. Practical use in calibration routines and inspection Designed as a handheld reference block, the product integrates smoothly into existing calibration procedures and inspection benches. Its light weight and compact form make handling straightforward while preserving dimensional integrity. When incorporated into documented calibration routines, the gauge supports traceable checks and routine verification steps, helping to maintain measurement confidence across production or laboratory operations. Choose the Metav IndustryLine ceramic end gauge for repeatable, low‑drift reference measurements and contact Metav Werkzeuge for procurement and technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M324.001.43 GTIN: 4054469142807 Material: Ceramic Nominal size: 1.43 mm Grade: 1 (DIN 861/1) Net weight: 0.002 kg Tariff number: 90173000 Facts Nominal dimension: 1.43 mm Weight: 0.002 kg Accuracy class: Grade 1 Standard reference: DIN 861/1 Special features Ceramic material for low wear Compact reference size for small gaps Category: End gauge SKU: M324.001.43 FAQ What tolerance level does this gauge meet? The gauge conforms to Grade 1 accuracy as specified in DIN 861/1, providing a standard tolerance suitable for routine calibration and verification tasks. Is the ceramic material suitable for regular workshop use? Yes, the ceramic composition of the gauge offers high wear resistance and stable performance under normal workshop conditions, making it appropriate for frequent reference checks. How should the gauge be stored to preserve accuracy? Store the gauge in a clean, dry environment away from extreme temperature swings and mechanical shock; regular visual inspection will help maintain the integrity of the 1.43 mm reference surface. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.43 mm Gauge Block Grade 1 DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of a certified-length reference that combines DIN EN ISO 3650 compliance, Grade 1 tolerance and a hardened special-steel construction for repeatable dimensional checks; the compact 1.43 mm nominal size keeps handling simple and storage efficient. Order the gauge block directly via Metav Werkzeuge or ask our consultants if needed. Gauge block 1.43 mm (DIN EN ISO 3650), Grade 1 — hardened special steel The gauge block 1.43 mm is a precision length standard for dimensional inspection and calibration in workshops and metrology laboratories. DIN EN ISO 3650 Grade 1 accuracy Hardened special steel construction Nominal size 1.43 mm Compact cross-section 30 x 9 mm Precision where accuracy matters The DIN EN ISO 3650 specification and Grade 1 classification mean this gauge functions as a trustworthy length reference for quality control and process validation. Manufactured to tight dimensional limits, the 1.43 mm nominal element provides a stable datum for micrometric comparisons and stack building. This reduces measurement uncertainty during routine inspections and supports reliable Go/No‑Go checks as well as precision setup tasks on machine tools. Robust material and form for repeatable readings Constructed from hardened special steel, the block resists wear and maintains gauge length under normal workshop conditions, which extends service life and preserves metrological integrity. The compact cross-section (30 x 9 mm) combines stiffness with ease of handling, limiting deformation from clamping or握ing forces. These material and design choices result in a durable reference that delivers consistent results across many cycles, lowering the need for frequent replacement and helping to keep process costs predictable. Simple integration into quality processes As a single-length reference, this block is straightforward to add to existing gauge sets or to use as an individual standard for spot checks and fixture verification. Clear normative compliance streamlines documentation and audit trails, while the small form factor aids transport between bench and machine. The combination of normative conformity and practical dimensions supports efficient workflows in both production and inspection environments, helping to uphold component tolerances and reduce rework. Secure this Metav IndustryLine gauge block for your reference set via Metav Werkzeuge — contact our Emmerich team for application guidance or order directly through our specialists Technical data Article number: M319.0143.1 GTIN: 4054469131016 Material: Special steel, hardened Nominal size: 1.43 mm Standard: DIN EN ISO 3650 Grade: 1 Weight: 0.006 kg Tariff number: 90173000 Category: Endmasse / Gauge blocks Dimensions & core data Nominal dimension: 1.43 mm Cross-section (up to 10 mm): 30 x 9 mm Weight: 0.006 kg Special features Compliance: DIN EN ISO 3650 Grade 1 Material: hardened special steel Intended use: precision length reference for inspection and calibration FAQ What tolerance class does this gauge block meet? The gauge block 1.43 mm is manufactured to Grade 1 tolerances under DIN EN ISO 3650, making it suitable for high‑precision dimensional comparisons and routine inspection tasks. Which material is used and how durable is it? Made from hardened special steel, the block offers wear resistance and dimensional stability appropriate for repeated use in workshop and laboratory settings. Can this block be used in calibration procedures? Yes — the dimensional conformity to DIN EN ISO 3650 makes the block appropriate as a reference in calibration workflows and traceable inspection routines; formal calibration certificates are handled separately according to customer requirements. How should the gauge block be handled and stored? Handle with clean, dry hands or gloves and avoid shocks; store in a protective tray or box to prevent surface damage and contamination, which preserves measurement accuracy. What are the identifying numbers for ordering and inventory? SKU: M319.0143.1; GTIN: 4054469131016; Category: Endmasse (gauge blocks) Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.43 mm Gauge Block, Grade 0, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Benefit from laboratory-grade Grade 0 accuracy and a hardened special steel construction that keeps reference dimensions stable over time; the 1.43 mm length complies with DIN EN ISO 3650 for reliable measurement chains. Order the gauge block directly via Metav Werkzeuge or ask our consultants for specific application advice. Gauge block 1.43 mm — End measure to DIN EN ISO 3650 (Metav IndustryLine) A gauge block 1.43 mm serving as a compact, high-precision length standard for calibration, instrument verification and fine metrology tasks Grade 0 accuracy to DIN EN ISO 3650 Hardened special steel construction Reference length 1.43 mm for precision work Traceable GTIN 4054469131009 Consistent laboratory-grade accuracy for repeatable results The Grade 0 classification and conformity with DIN EN ISO 3650 ensure this end measure delivers a stable reference for routine verification and calibration tasks. In practice, the consistent geometry of the block reduces measurement uncertainty when used as a baseline for micrometre and calliper checks or for building calibrated stacks. The standardised datum surfaces support flatness and parallelism that are essential for reproducible comparative measurement, minimising setup variation and improving process control in quality assurance workflows. Durable design that preserves reference dimensions Manufactured from hardened special steel, the block resists wear during regular use, maintaining the nominal length over extended service intervals. The compact profile (30 × 9 mm for sizes up to 10 mm) provides a stable contact area while keeping handling straightforward; at 0.006 kg the part is easy to manoeuvre without sacrificing rigidity. The robust finish and material choice reduce the need for frequent replacement, supporting continuous operation in busy inspection benches and calibration labs. Traceability and practical use in measurement chains The item is supplied with unique identification for traceability (GTIN 4054469131009) and is listed under article number M319.0143.0, facilitating stock management and documentation in controlled environments. As a reference standard, it is suitable for direct comparison checks, stack formation for intermediate lengths and verification of external instruments. Delivered through Metav’s quality-filtered supply chain, the block fits into procurement routines that require transparent origin and consistent product quality for industry and trade alike. Contact Metav Werkzeuge in Emmerich for procurement and technical advice: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M319.0143.0 GTIN: 4054469131009 Material: Special steel, hardened Standard: DIN EN ISO 3650 Grade: 0 Numbers / Core technical data Nominal length: 1.43 mm Weight: 0.006 kg Tariff number: 90173000 Cross-section: 30 × 9 mm (for sizes up to 10 mm) Special features Compact end measure for precision metrology Hardened special steel for wear resistance Suitable for calibration chains and verification tasks Category: Gauge blocks / End measures FAQ What tolerance class does this gauge block meet? The gauge block meets Grade 0 tolerance as specified in DIN EN ISO 3650, providing a laboratory-grade reference suitable for precision verification tasks. Which material is used for the block and why is it important? The block is made from hardened special steel, chosen for its wear resistance and dimensional stability, which helps to maintain the 1.43 mm reference length during repeated use. Can this block be used to check callipers and micrometres? Yes, the 1.43 mm reference is suitable for direct comparison checks of external measuring instruments and for building calibrated stacks for intermediate lengths. How is traceability handled for this item? Traceability is supported via the GTIN 4054469131009 and the article number M319.0143.0, which assists with inventory control and documentation in controlled measurement environments. Is this product appropriate for continuous workshop use? The hardened steel construction and compact profile make the block appropriate for regular workshop and inspection-bench use where a stable reference and low wear are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.44 mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of Grade 1 accuracy (DIN 861/1), the thermal stability of ceramic and the compact 1.44 mm nominal size to establish a dependable reference standard in the metrology lab. Order the Ceramic Gauge Block directly via Metav Werkzeuge or consult the Metav advisors for specification and application guidance. Ceramic Gauge Block 1.44 mm (Grade 1 DIN 861/1) by Metav IndustryLine The Ceramic Gauge Block 1.44 mm (Grade 1 DIN 861/1) is a compact metrology reference intended for precise dimensional inspection and calibration tasks in laboratories and industrial quality control. Ceramic material for thermal stability Grade 1 tolerance to DIN 861/1 Nominal length 1.44 mm for fine calibration Lightweight 0.002 kg for easy handling Reliable reference for laboratory and workshop measurements The block is specified as Grade 1 in accordance with DIN 861/1, giving a clear indication of its manufacturing tolerance and suitability where consistent dimensional references are required. With a nominal length of 1.44 mm, this ceramic reference offers a stable datum for fine measurement tasks. The combination of defined tolerance class and small nominal size supports reproducible results during short-range comparisons and routine control checks, helping to reduce uncertainty in inspection processes. Material advantages: stability, wear resistance and low expansion Made from ceramic, the gauge block provides low thermal expansion compared with many metallic standards, which translates into improved dimensional stability under typical workshop temperature fluctuations. The inherent wear resistance and corrosion immunity of ceramic surfaces preserve the reference dimension over repeated use, maintaining measurement integrity and reducing the need for frequent replacement. Its minimal mass also contributes to a reduced thermal load when handled, limiting transient length changes during use. Suited to calibration and dimensional inspection workflows As a compact reference standard, this gauge block integrates well into calibration benches and quality-control rigs where small nominal values are required. The lightweight nature eases handling and positioning when pairing with larger reference sets or when performing bench-level checks. Storing and identifying the block alongside calibration documentation helps maintain traceability within a quality management system, while the clear grade marking supports compliance with established inspection procedures. Confidence through Metav IndustryLine supply Sourcing this ceramic reference from Metav IndustryLine gives access to a supplier that positions quality and accessibility at the forefront. Metav’s European distribution hub acts as a quality filter for the market, supporting reliable supply and technical competence. The product benefits from Metav’s experience in precision tooling and metrology, making it a practical choice for workshops and laboratories seeking accessible, consistent standards for everyday measurement tasks. For traceable precision choose the Metav IndustryLine ceramic gauge block and contact Metav Werkzeuge for product advice or specification support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M324.001.44 GTIN: 4054469142814 Tariff number: 90173000 ECLASS: 21170108 Facts Nominal size: 1.44 mm Weight: 0.002 kg Grade: 1 (DIN 861/1) Special features Material: Ceramic Category: Endmasse (gauge block) Label: Keramik-Endmaß 1,44 mm, Güte 1 DIN 861/1 SKU: M324.001.44 FAQ What tolerance class does this gauge block meet? The Ceramic Gauge Block meets Grade 1 as specified by DIN 861/1, making it suitable for precise reference tasks in inspection routines. Is ceramic a suitable material for repeated use as a reference standard? Yes, the ceramic construction offers wear resistance and low susceptibility to corrosion, which helps the gauge block retain its reference dimension across multiple uses. Can the block be used for calibration in a workshop environment? The gauge block is intended as a reference standard for calibration and dimensional inspection in laboratory and workshop settings where small nominal lengths are required. How is the block identified for inventory and traceability? The product is listed with SKU M324.001.44 and GTIN 4054469142814, which supports clear identification and traceability within a quality system. Are there temperature considerations when using this reference? Ceramic exhibits lower thermal expansion than many metals, improving dimensional stability; standard laboratory temperature control practices should still be followed to minimise measurement uncertainty. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.44 mm Gauge Block Grade 1 DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of DIN EN ISO 3650 Grade 1 conformity and a hardened special‑steel construction for reliable small‑part inspection and repeatable master measurements. Order the gauge directly via Metav Werkzeuge or contact the consultants for procurement and specification support. End gauge 1.44 mm — precision gauge block, DIN EN ISO 3650, Grade 1 (Metav IndustryLine) End gauge 1.44 mm: a compact, grade‑1 gauge block intended for traceable dimensional checks and reference measurements in inspection and toolmaking environments. DIN EN ISO 3650, Grade 1 accuracy Nominal size 1.44 mm for small‑gauge checks Hardened special steel construction Compact cross‑section for stable handling Precise conformity for dependable inspection results The End gauge 1.44 mm is manufactured to DIN EN ISO 3650 and delivered as a Grade 1 measuring standard, which ensures tight manufacturing tolerances suitable for high‑accuracy shopfloor checks and laboratory comparisons. Conformity to the standard means uncertainty is minimised when the block is used as a reference for calibration loops or comparative measurements; the nominal size 1.44 mm provides a clear reference for small bores, grooves or keyed features. This level of precision supports efficient quality control, reducing rework and speeding up inspection routines while providing an objective basis for pass/fail decisions. Robust material and compact geometry for repeatable handling Made from hardened special steel, the block combines wear resistance with dimensional stability under normal workshop use. The cross‑section is specified as 30 × 9 mm for sizes up to 10 mm and 35 × 9 mm from 10.1 mm, which keeps the mass low while maintaining a stable bearing area for contact measurement. At approximately 6 g, the unit is easy to position and less prone to causing operator fatigue during repetitive use, yet heavy enough to sit steadily when aligning against workpieces. The hardened surface improves longevity and helps preserve the measuring face geometry, resulting in consistent readings over many cycles. Practical applications that improve workflow and confidence This gauge block is suited for inspection benches, toolrooms and assembly jigs where small, traceable standards are needed to verify micrometric fits or gauge assemblies. Using a standardised end gauge speeds up set‑up times for comparative checks and provides a reliable reference when adjusting fixtures or verifying measuring instruments. The combination of standard compliance and rugged construction allows engineers and technicians to make informed decisions quickly, increasing throughput without sacrificing measurement certainty. Metav’s offering emphasises accessible precision, backed by a European quality filter and logistics from Emmerich. Contact Metav Werkzeuge for expert assistance with Grade‑1 end gauges and specification advice from our precision team in Emmerich. Technical data Article number: M319.0144.1 GTIN: 4054469131030 Standard: DIN EN ISO 3650 Nominal size: 1.44 mm Material: Special steel, hardened Grade: 1 Weight: 0.006 kg Cross‑section: up to 10 mm → 30 × 9 mm; from 10.1 mm → 35 × 9 mm Commodity code: 90173000 Facts Nominal dimension: 1.44 mm Mass: 0.006 kg (approx. 6 g) Cross‑section dimensions: 30 × 9 mm / 35 × 9 mm Compliance: DIN EN ISO 3650 Special features Grade 1 accuracy Hardened special steel for wear resistance Compact geometry for stable handling Suitable as a reference standard in inspection and toolrooms FAQ What accuracy class does this gauge meet? The end gauge meets DIN EN ISO 3650 Grade 1, providing tight tolerances appropriate for high‑precision reference measurements using the End gauge 1.44 mm (SKU M319.0144.1). What material is used and how does it affect durability? The block is manufactured from hardened special steel, which increases wear resistance and preserves the measuring faces under normal workshop conditions. Is the gauge suitable for inspection of small bores and keys? Yes; with a nominal size of 1.44 mm and compact cross‑section, this gauge is intended for small‑part checks, comparative measurements and fixture verification. What is the article number and where is it classified? The article number is M319.0144.1 and it is classified under the commodity code 90173000 for customs and logistics. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
ensure traceable length calibration with gauge blocks
gauge blocks, also called slip gauges or end gauges, are precision length standards designed to transfer exact measures during calibration and setup. Manufactured and graded for metrological use, they provide the reference dimensions needed to verify and adjust measuring instruments in industrial workshops and calibration labs.
how gauge blocks work and where they are essential
gauge blocks are used to create known lengths by wringing individual blocks together or by using a single block as a reference. length calibration in industry commonly relies on parallel gauge blocks, while angle, cylinder and sphere end gauges serve specialised tasks. these blocks are produced in steel, ceramic or carbide, and their material choice balances wear resistance with thermal behaviour. regular calibration—typically performed annually—by DAkkS-accredited laboratories ensures traceability. the highest-precision reference work, class K, is certified by the PTB using laser techniques; classes 0, 1 and 2 are tested under progressively less controlled conditions (class 0 in a climate-controlled lab, class 1 in a standard measurement room, class 2 in production).
measurable benefits that cut downtime and uncertainty
- consistent, traceable length standards reduce rework and measurement disputes by enabling reliable instrument calibration.
- choosing the correct material (steel, ceramic, carbide) extends service life and limits wear in high-use environments.
- selecting the right accuracy class (K, 0, 1 or 2) matches calibration effort to application needs and avoids over‑specification.
- annual calibration by accredited labs maintains documented compliance and supports quality systems such as ISO.
why Metav is a smart partner for precision standards
Metav combines specialist knowledge with a broad range of measurement technology, making the procurement of gauge blocks straightforward and dependable. with over 48,000 customers and more than 250,000 products stocked from Emmerich, Metav acts as a pragmatic quality filter for European workshops, reducing supplier complexity and ensuring consistent supply.
In short, gauge blocks deliver traceable, material‑appropriate and class‑matched references that keep calibration workflows efficient and auditable.
faq
what materials are gauge blocks available in and why does it matter?
gauge blocks are typically supplied in steel, ceramic or carbide. material choice affects wear resistance, stability and thermal expansion; selecting the right material for your environment optimises longevity and measurement stability.
how often should gauge blocks be calibrated?
industry practice is an annual calibration cycle, carried out by DAkkS-accredited laboratories, though frequency can be increased depending on usage and required uncertainty.
what do the accuracy classes k, 0, 1 and 2 indicate?
the classes denote graded tolerances and test conditions: K is the highest precision (certified by PTB with laser measurement), class 0 is checked under climate-controlled lab conditions, class 1 in a normal measurement room and class 2 in production environments.
are parallel gauge blocks always used for length calibration?
yes; for length calibration the parallel gauge blocks are the primary standard because they provide exact planar faces for wringing and stacking to create precise lengths.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com