End gauges for precise length calibration
End gauges provide exact reference lengths for calibrating measurement instruments and ensuring consistent dimensional accuracy in metalworking and inspection processes. Used in production and laboratory settings, these end gauges—made from steel, ceramic or carbide—allow technicians to compensate for wear and thermal effects and maintain measurement traceability, especially when employed alongside parallel end gauges, cylinder gauges and calibration masters. Classes 0, 1 and 2 define practical tolerance levels for workshop, inspection-room and production use respectively, delivering the repeatable precision required for machining and quality control.
1.44 mm Gauge Block, Hardened Special Steel, DIN EN ISO 3650 Grade 0 - Metav IndustryLine
Benefit from a reference standard that combines DIN EN ISO 3650 grade 0 accuracy with a hardened special steel body and a compact cross‑section for reproducible verification tasks. Order the Single End Gauge 1.44 mm directly via Metav Werkzeuge or ask our consultants if needed. Single End Gauge 1.44 mm — End gauge, DIN EN ISO 3650, Grade 0 (Metav IndustryLine) The Single End Gauge 1.44 mm is a precision end gauge intended as a dimensional reference for laboratory calibration and workshop quality control, designed for repeatable verification of measuring instruments and small components. DIN EN ISO 3650, grade 0 Nominal size 1.44 mm Hardened special steel construction Compact cross-section 30 x 9 mm Standards-based accuracy for reliable reference measurements Compliance with DIN EN ISO 3650 and grade 0 tolerance places this end gauge among high‑precision reference tools used in calibration work and laboratory checks. The nominal size of 1.44 mm is manufactured to tight limits, which reduces uncertainty when comparing micrometers, callipers or gauge blocks. As a result, the measuring standard supports consistent decision criteria in inspection routines and minimises rework through reliable go/no‑go comparisons. Robust material and compact geometry for repeatable handling Constructed from hardened special steel, the gauge combines surface hardness with dimensional stability to withstand repeated contact during inspection cycles. The compact 30 x 9 mm cross‑section for nominal sizes below 10 mm provides a stiff profile that limits bending and delivers stable contact conditions; the low mass (0.006 kg) makes positioning easier without compromising durability. These properties translate into longer service life and fewer replacements in busy test benches. Practical use in workshop and calibration workflows As a dedicated end standard, the gauge integrates smoothly into verification processes for small parts and measuring instruments, serving as a trustworthy reference on inspection benches. Its slim geometry allows access to narrow features, while the hardened steel resists wear from frequent measuring. Routine care—cleaning contact surfaces and storing the gauge in a dry, cushioned environment—keeps the reference condition stable over time and supports traceable measurement routines. For availability and technical advice on the Metav IndustryLine Single End Gauge 1.44 mm, contact Metav Werkzeuge GmbH in Emmerich by phone at +49 2822 7131930 or by email at info@metav-werkzeuge.com Technical data Article number: M319.0144.0 GTIN: 4054469131023 Tariff number: 90173000 Facts Nominal size: 1.44 mm Weight: 0.006 kg Cross-section: up to 10 mm: 30 x 9 mm; from 10.1 mm: 35 x 9 mm Special features Material: Special steel, hardened Standard: DIN EN ISO 3650 Tolerance grade: 0 Category: End gauges Brand: Metav IndustryLine FAQ What tolerance class does this gauge meet? The gauge conforms to DIN EN ISO 3650 in grade 0, providing tight manufacturing limits suitable for high‑precision reference use. Which material is used for the gauge and why is it beneficial? The end gauge is made of hardened special steel, which offers wear resistance and long‑term dimensional stability for repeated inspection tasks. How should the gauge be stored to preserve accuracy? Store the gauge clean and dry in a cushioned, corrosion‑free environment; avoid impacts and abrade contact points only with appropriate non‑abrasive methods. For what applications is this end gauge best suited? The gauge is intended for dimensional verification, calibration checks of micrometers and callipers, and routine inspection of small components where a stable reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.45 mm End Gauge Single, DIN EN ISO 3650 Grade 0, Hardened Special Steel - Metav IndustryLine
Take advantage of a laboratory-grade reference that combines Grade 0 accuracy, a compact 1.45 mm nominal size and hardened construction for reliable repeatability in calibration and inspection tasks; order or request advice through Metav Werkzeuge for professional procurement and application support. Single gauge block 1.45 mm, DIN EN ISO 3650, Grade 0 — Metav IndustryLine The Single gauge block 1.45 mm, DIN EN ISO 3650, Grade 0 serves as a precision reference for calibration labs and workshop quality control, offering a compact reference length for comparative and transfer measurements. Grade 0 accuracy to DIN EN ISO 3650 Hardened special steel construction Compact cross-section for stable handling Precision reference for routine and laboratory measurements A reference standard with Grade 0 specification to DIN EN ISO 3650 delivers a high level of precision required for gauge block stacks, master comparisons and instrument verification. The nominal length of 1.45 mm is intended as a traceable datum in dimensional checks where small increments matter; using a certified reference reduces uncertainty in comparative measurements and supports repeatable traceability chains. The compact size makes the length simple to incorporate into master sets without sacrificing measurement confidence. Robust construction for repeatable handling and low wear Manufactured from hardened special steel, the component resists surface damage and maintains dimensional stability under routine handling. The standard cross-section is 30 × 9 mm for sizes up to 10 mm, changing to 35 × 9 mm for larger nominal lengths, which improves stiffness where longer blocks require it. With a mass of approximately 0.006 kg, the block is easy to manipulate while remaining stiff enough to avoid handling-induced deflection. These material and geometric choices support long-term durability and consistent comparative results. Practical integration into inspection workflows and procurement Supplied under the Metav IndustryLine designation and identified as SKU M319.0145.0, the block is suitable for use as a workshop master, calibration reference or as an element within precision measurement sets. Its conformity to DIN EN ISO 3650 allows uncomplicated specification in quality documents and procurement lists. Metav’s offering emphasises accessibility of metrology: established logistics and technical advice from the Emmerich hub simplify obtaining the right standard for a given measurement task, helping organisations move from uncertainty to documented reproducibility. Contact Metav Werkzeuge today for tailored advice on integrating Metav IndustryLine gauge blocks into existing calibration procedures and for assistance in procuring traceable reference standards. Technical data Article number: M319.0145.0 GTIN: 4054469131047 Tariff number: 90173000 Facts Nominal size: 1.45 mm Weight: 0.006 kg Standard: DIN EN ISO 3650 Grade: 0 Special features Material: hardened special steel Cross-section: 30 × 9 mm (≤ 10 mm), 35 × 9 mm (from 10.1 mm) Category: Gauge blocks FAQ What tolerance class does this gauge block meet? The single gauge block meets Grade 0 tolerance as specified in DIN EN ISO 3650, providing high-accuracy reference performance for calibration and comparative measurement. Is the block suitable as a workshop master for daily checks? Yes, the Metav IndustryLine single gauge block M319.0145.0 is designed for routine use as a stable workshop master and for integration into small gauge sets. What material is used and how does it affect longevity? The block is made from hardened special steel, which offers wear resistance and dimensional stability for prolonged, repeatable use in inspection environments. How should the block be handled to preserve its accuracy? Handle with clean, dry hands or tweezers, avoid unnecessary contact on measuring faces and store the block in a protective case when not in use to maintain surface quality and measurement integrity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.45 mm Gauge Block, Hardened Special Steel, DIN EN ISO 3650 Grade 1 - Metav IndustryLine
Take advantage of a precisely specified DIN EN ISO 3650 Grade 1 end gauge in hardened special steel and a compact cross-section for stable handling; benefit from traceable conformity and workshop-ready robustness. Order directly via Metav Werkzeuge or consult our experts for application advice. End gauge 1.45 mm — DIN EN ISO 3650, Grade 1 (Metav IndustryLine) A compact, calibrated-style end gauge designed for precision verification tasks in quality control and toolmaking, compliant with DIN EN ISO 3650 and finished in hardened special steel DIN EN ISO 3650 conformity, Grade 1 Hardened special steel for wear resistance Nominal size 1.45 mm with tight tolerance Compact cross-section 30×9 mm / 35×9 mm depending on size Guaranteed conformity for dependable inspection results The DIN EN ISO 3650 standard ensures that the end gauge meets internationally recognised tolerances; this makes it a reliable reference for acceptance checks and routine dimensional verification. Specified as Grade 1, the item provides a high level of geometric accuracy suitable for demanding measurement tasks. Using a standardised reference reduces uncertainty in inspection procedures and supports consistent quality documentation across production batches. Robust material and form for long service life Manufactured from hardened special steel, the gauge resists wear and preserves critical dimensions during repeated use, which minimises rework and replacement intervals. The compact cross‑section (30×9 mm up to 10 mm nominal, 35×9 mm above 10.1 mm) combines low mass with sufficient rigidity to avoid distortion under typical handling. Low weight and a clean, stable profile make the piece easy to position in fixtures and measuring setups while maintaining the dimensional integrity that inspection protocols require. Practical use in production and metrology workflows Designed for straightforward integration into quality control, the end gauge supports rapid verification steps and helps streamline inspection routines in toolrooms and production lines. The nominal size 1.45 mm provides a precise reference point for comparison measurements and for checking small bores or mating features where narrow tolerances are critical. Clear material specification and compliance with established standards facilitate traceability in audit situations and help maintain confidence in measurement results. Contact Metav Werkzeuge for specific application guidance or to request a quotation for the Metav IndustryLine end gauge in DIN EN ISO 3650 Grade 1 Technical data Article number: M319.0145.1 GTIN: 4054469131054 Standard: DIN EN ISO 3650 Material: Special steel, hardened Nominal size: 1.45 mm Grade: 1 Weight: 0.006 kg Data Nominal size: 1.45 mm Weight: 0.006 kg Cross-section up to 10 mm: 30×9 mm Cross-section from 10.1 mm: 35×9 mm Tariff number: 90173000 Special features Compliance: DIN EN ISO 3650, Grade 1 Category: End gauge Finish: Hardened special steel SKU: M319.0145.1 Category path: Messgeräte › Endmasse FAQ What tolerance class does this end gauge comply with? The end gauge complies with DIN EN ISO 3650 Grade 1, providing a high level of geometric accuracy for inspection tasks. Is the material specified for long-term use in a workshop environment? Yes, the gauge is made from hardened special steel, which offers good wear resistance and stable dimensions during repeated handling. Which nominal size is this product available in and how is it identified? This item is supplied as a nominal 1.45 mm end gauge and is listed under SKU M319.0145.1 for Metav IndustryLine. Can this gauge be used for routine quality control and traceability? The DIN EN ISO 3650 specification and clear material declaration make the gauge suitable for routine verification and for inclusion in traceable inspection records. What are the cross-section dimensions and why do they matter? The cross-section is 30×9 mm for gauges up to 10 mm nominal and 35×9 mm above 10.1 mm; these dimensions balance stiffness and handling ease to reduce measurement error due to bending. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.45mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Combining Grade 1 DIN 861/1 accuracy with a thermally stable ceramic construction and a compact nominal length of 1.45 mm, this gauge block serves as a dependable reference for fine calibration work; order the Ceramic gauge block 1.45 mm, Grade 1 directly via Metav Werkzeuge or consult our advisors for specification support. Ceramic gauge block 1.45 mm, Grade 1 (DIN 861/1) — Metav IndustryLine A Ceramic gauge block 1.45 mm, Grade 1 DIN 861/1 designed as a compact, high-stability length standard for precision metrology and calibration tasks Grade 1 accuracy to DIN 861/1 Thermally stable ceramic construction Compact nominal length of 1.45 mm Reference-grade accuracy for dependable length standards The unit delivers Grade 1 conformity according to DIN 861/1, which defines tight geometric and dimensional tolerances for gauge blocks used as calibration standards. This degree of precision makes the component suitable as a reference in workshops and inspection benches where repeatability matters. The specified 1.45 mm nominal length provides an exact incremental value for assembling traceable length stacks or for direct comparison tasks, helping to preserve measurement chains across instruments. Ceramic construction that reduces thermal influence Constructed from ceramic, the block offers inherently low thermal expansion compared with many metallic equivalents, improving short-term stability during temperature fluctuations common in production environments. The lightweight nature (approx. 0.002 kg) and non‑corroding surface ensure the block remains dimensionally stable and low‑maintenance. These material properties reduce the need for frequent reconditioning and support more consistent results when used as part of a reference set. Calibration and workshop integration for practical workflows As a compact reference element, this block integrates readily into existing gauge block sets and calibration procedures. The plain geometry and reliable surface finish simplify wringing and stacking operations, supporting fast stack assembly and straightforward comparison measurements. Clear labelling with SKU M324.001.45 and GTIN facilitates inventory control and traceability within quality management systems. Practical applications and handling benefits Ideal for precision measurement tasks in metrology labs and machine shops, the block suits fine calibration of micrometres, calipers and length standards where small increments are required. The minimal nominal length is particularly useful for filling gaps in gauge block sets or for establishing short reference intervals during inspection routines. Proper handling—clean, dry storage and gentle wringing—preserves the surface condition and maintains the reference accuracy across repeated use. For specification advice or to arrange supply of the Metav IndustryLine ceramic gauge block, contact Metav Werkzeuge for direct delivery from Emmerich and guidance on integration into existing calibration routines Technical data SKU: M324.001.45 GTIN: 4054469142821 Tariff number: 90173000 Category: Gauge blocks (measurement instruments) Facts Nominal length: 1.45 mm Accuracy grade: Grade 1 (DIN 861/1) Weight: 0.002 kg Special features Material: Ceramic Intended use: Reference length standard, calibration and inspection Brand: Metav IndustryLine FAQ What accuracy class does this gauge block meet? The Ceramic gauge block 1.45 mm complies with Grade 1 tolerances as specified in DIN 861/1, making it suitable as a calibration reference for precision measurement tasks. Is the ceramic material advantageous compared with steel blocks? Yes, the ceramic construction of this Metav IndustryLine gauge block offers lower thermal expansion and excellent corrosion resistance, which helps maintain dimensional stability in variable ambient conditions. Can this block be incorporated into existing gauge block sets? The compact 1.45 mm nominal length is intended to complement existing sets and can be wrung and stacked with standard gauge blocks to achieve required reference lengths. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.46 mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of the combination of industry-grade accuracy, thermal stability of ceramic construction and an ultra-compact nominal length for repeatable reference measurements. Order the gauge block directly via Metav Werkzeuge or consult our specialists for application guidance. Ceramic gauge block 1.46 mm, Grade 1 DIN 861/1 (M324.001.46) — Metav IndustryLine The ceramic gauge block 1.46 mm, Grade 1 DIN 861/1 is a compact reference standard designed for precise length comparisons and calibration tasks in workshop and laboratory metrology. Grade 1 accuracy per DIN 861/1 Stable ceramic construction for consistent lengths Nominal length 1.46 mm for fine reference checks Mass approximately 2 g for easy handling Compact reference for precise comparative measurement The ceramic reference is intended for situations that demand a stable, repeatable short-length standard. With a nominal length of 1.46 mm and a Grade 1 classification according to DIN 861/1, this block supports routine verification of micrometres, calipers and comparator setups. The compact format reduces the risk of bending or handling error during short-range checks and permits straightforward placement in fixtures or between measurement jaws. The construction from ceramic provides material benefits that assist in maintaining the reference length under normal workshop conditions. Material choice that supports stability and wear resistance A ceramic gauge block is selected for its dimensional stability and low susceptibility to surface wear compared with some metals; these properties help preserve the reference dimension over many measurement cycles. The material choice reduces sensitivity to small contact abrasions, which supports consistent performance across repeated comparisons. This makes the product particularly suitable as a short-length reference in calibration benches and inspection routines where longevity and low maintenance are priorities. Practicality for workshop and laboratory workflows The small mass (about 0.002 kg) and compact size simplify handling and integration into existing metrology routines. The block’s format suits quick comparative checks, go/no-go testing and as a transfer standard when setting up instruments for jobs that require high repeatability rather than long-range measurement. The clear marking with SKU (M324.001.46) and GTIN ensures traceability when logging standards in a quality system, while the lightweight nature aids safe storage and transport between workstations. For a reliable short-length reference from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for procurement and technical advice at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: M324.001.46 GTIN: 4054469142838 Customs tariff number: 90173000 Material: Ceramic Nominal length: 1.46 mm Quality grade: 1 (DIN 861/1) Weight: 0.002 kg Facts Category: End gauge / gauge block Label: Keramik-Endmaß 1,46 mm, Güte 1 DIN 861/1 SKU: M324.001.46 Parent category: Endmasse (metrology standards) Special features Compact reference length for comparative checks Durable ceramic surface suited for repeated contact Suitable for workshop and laboratory verification tasks FAQ What level of accuracy does this gauge block provide? The ceramic gauge block M324.001.46 is specified as Grade 1 under DIN 861/1, offering the industrial accuracy expected for workshop and bench-level reference standards. Is the material suitable for routine comparator use? Yes, the ceramic construction of this gauge block is chosen for stability and wear resistance, making it well suited to routine comparative measurements and transfer checks. How should the gauge block be handled and stored? Handle the block with clean hands or gloves to avoid surface contamination; store it in a protective case or drawer to preserve the reference surface and dimension. Can this block be used to check calipers and micrometres? The 1.46 mm nominal length is ideal for short-range verification and calibration checks of micrometres and calipers where a compact, repeatable reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.46 mm Gauge Block End Standard Grade 1 DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Precision and durability come together in this DIN EN ISO 3650 Grade 1 reference: a 1.46 mm nominal gauge block manufactured from hardened special steel for reproducible contact and long service life. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. End gauge (gauge block) 1.46 mm — DIN EN ISO 3650, Grade 1, hardened special steel The End gauge 1.46 mm is a precision reference block intended for dimensional calibration and traceable reference measurements in inspection, calibration laboratories and quality assurance. DIN EN ISO 3650 Grade 1 accuracy Hardened special steel construction Nominal size 1.46 mm for precision setups Reliable reference accuracy for calibration routines The gauge is manufactured to DIN EN ISO 3650 with Grade 1 tolerance, providing a reproducible reference for routine calibration and inspection tasks. The 1.46 mm nominal dimension offers a stable standard for comparative measurements, reducing measurement uncertainty in routine checks and setting up master references on inspection benches. As a standard-compliant reference, this block supports consistent results across instruments and operators, which helps streamline quality control documentation and enhances process reliability. Robust, low-deformation design for repeatable contact Constructed from hardened special steel, the block resists wear and maintains contact geometry under normal use, delivering long-term stability and abrasion resistance. The compact cross-section of 30 x 9 mm (applies to sizes up to 10 mm) provides a stable contact area while keeping thermal mass low; the result is reduced thermal drift during handling. With a nominal mass of approximately 0.006 kg, the component is easy to handle without compromising stiffness, making it suited to frequent use on inspection tables and in workshop environments where repeatability matters. Fits directly into quality workflows and inspection sets Designed as a reference standard, the block integrates into calibration kits, comparator setups and traceability chains required for documented quality management. The manufacturing standard ensures compatibility with established QA procedures and supports metrological comparability between instruments. For customers seeking guidance on how to incorporate this reference into an existing calibration routine, Metav Werkzeuge provides technical advice and product selection support to match measurement tasks with the appropriate reference set or fixture. Choose the Metav IndustryLine reference block for dependable, standard-compliant calibration and contact Metav Werkzeuge for tailored procurement and local support from our Emmerich-based team. Technical data Article number: M319.0146.1 GTIN: 4054469131078 Nominal size: 1.46 mm Standard: DIN EN ISO 3650 Grade: 1 Weight: 0.006 kg Core specifications Nominal size: 1.46 mm Weight: 0.006 kg Cross-section: 30 x 9 mm (for sizes ≤ 10 mm) Tolerance class: Grade 1 Materials & features Material: Special steel, hardened Category: Gauge block / End gauge Application: Reference standard for calibration and inspection Customs tariff number: 90173000 FAQ What tolerance class does this reference conform to? The end gauge conforms to DIN EN ISO 3650 Grade 1, providing the defined tolerance band for a reliable reference. Is the nominal size exactly 1.46 mm? Yes, the nominal dimension of this gauge block is 1.46 mm as specified; the Grade 1 tolerance defines its permitted deviation. What material is used and how does it affect longevity? The block is made from hardened special steel, chosen for wear resistance and dimensional stability under normal inspection use. Can this block be used in a calibration set for laboratory comparators? Yes, the block is intended as a reference standard and integrates into calibration kits and comparator setups where DIN EN ISO 3650 traceability is required. How should the gauge be handled and stored? Handle the block with clean fingers or gloves to avoid oil and contamination; store in a protective case to preserve contact faces and prevent corrosion. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.46 mm Gauge Block, Hardened Special Steel, DIN EN ISO 3650 Grade 0 - Metav IndustryLine
Take advantage of DIN EN ISO 3650 grade 0 accuracy and a 1.46 mm nominal size in a compact, hardened construction for reproducible reference measurements; order this gauge directly via Metav Werkzeuge or consult our specialists for alignment with existing calibration routines. Single end gauge 1.46 mm — End gauge, DIN EN ISO 3650, grade 0 (Metav IndustryLine) A single end gauge 1.46 mm designed as a high-stability reference for dimensional inspection and laboratory calibration in industrial metrology and quality assurance. DIN EN ISO 3650, grade 0 accuracy Nominal size 1.46 mm for reference checks Hardened special steel for long-term stability Consistent reference accuracy for routine inspection The gauge serves as a compact reference standard for verifying measuring instruments and setting master records in quality control. Manufactured to DIN EN ISO 3650 and specified as grade 0, it provides a defined tolerance band that reduces uncertainty during comparison measurements; this makes it suitable where reproducible dimensional checks are required. The 1.46 mm nominal size is ideal for small-gap verification, pin checks and comparative calibration tasks in production and metrology labs. Durable construction that preserves measurement integrity Constructed from special hardened steel, the component resists wear and maintains form stability under regular handling. The slim profile and the specified cross-section for small sizes ensure low thermal mass and rapid thermal equilibrium on the bench, lowering short-term drift during inspection. Machined surfaces and material choice mean the reference remains reliable over repeated use, supporting predictable maintenance intervals and fewer replacements. Practical fit for laboratories and workshop metrology This reference gauge is optimised for standardised inspection routines and is well-suited to calibration benches, comparator set-ups and incoming goods inspection. Its small footprint and low mass make it convenient for bench work and portable test kits, while the precision specification supports traceable decision‑making in acceptance testing. Combined with Metav IndustryLine’s distribution and quality control, the gauge fits into a pragmatic workflow that balances accuracy and availability. Choose Metav IndustryLine for dependable reference standards and contact Metav Werkzeuge in Emmerich for supply and technical guidance on integrating this gauge into existing inspection routines Technical data SKU: M319.0146.0 GTIN: 4054469131061 Standard: DIN EN ISO 3650 Article category: End gauges Facts Nominal size: 1.46 mm Tolerance grade: 0 Weight: 0.006 kg Cross-section (for sizes ≤10 mm): 30 x 9 mm Special features Material: special hardened steel Application: reference gauge for calibration and dimensional inspection Customs tariff number: 90173000 Manufacturer brand: Metav IndustryLine FAQ What tolerance class does this gauge conform to? The gauge is manufactured to DIN EN ISO 3650 and specified as grade 0, providing a tight tolerance band for reference‑level comparisons. Is calibration included with the product? The product data do not specify a supplied calibration certificate; the single end gauge 1.46 mm is specified to the standard, and calibration options can be confirmed on request. What material is the gauge made from? This end gauge is made from special hardened steel, chosen for wear resistance and dimensional stability. What is the cross-section for this nominal size? For nominal sizes up to 10 mm the cross-section is 30 x 9 mm, which applies to this 1.46 mm gauge. Which applications are appropriate for this gauge? The gauge functions as a reference standard for dimensional inspection, comparator checks, bench calibration and incoming inspection in metrology laboratories and workshop quality control (SKU M319.0146.0). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.47 mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of the combination of ceramic stability, Grade 1 accuracy and a compact 1.47 mm reference length for reproducible inspection results; order the gauge block directly via Metav Werkzeuge or consult our specialists for application advice. Ceramic gauge block 1.47 mm, Grade 1 (DIN 861/1) — Metav IndustryLine precision reference A ceramic gauge block 1.47 mm, Grade 1 designed as a stable length reference for laboratory calibration tasks and routine workshop checks Precision Grade 1 (DIN 861/1) Homogeneous ceramic material Nominal length 1.47 mm Lightweight 0.002 kg Stable reference for consistent measurement results The compact ceramic block provides a short, highly stable reference length that supports repeatable verification of hand tools and bench instruments. Manufactured to Grade 1 according to DIN 861/1, the element is suitable where small, precise standards are required; the combination of minimal thermal sensitivity and dimensional stability reduces drift during short-term handling. As a hardened reference, the component serves as a clear measurement standard for micrometres, vernier callipers and check fixtures, enabling quick confidence checks without complex setup. Material advantages that aid accuracy and longevity Made from engineering ceramic, the block benefits from low thermal expansion and excellent wear resistance, which keeps the reference dimension stable across normal workshop temperature swings. The non‑metallic structure is non‑magnetic and corrosion‑resistant, so surface integrity is maintained without protective coatings. These material properties translate into fewer correction steps during routine inspections, reducing downtime and improving throughput in supply chains that require fast confirmation of tool performance. Practical handling and integration into quality routines The discreet size and low mass make the block easy to handle and integrate into inspection benches or portable check kits. The nominal 1.47 mm length is a convenient intermediary reference for small-gap verification and component set‑up; its compact form allows use in confined measuring fixtures. Where traceability is required, the block functions as a tangible reference in daily quality routines, supporting documented checklists and control charts and simplifying the transition between bench checks and formal calibration procedures. Reliability for workshops and metrology labs The product’s specification and manufacturing standard ensure it is a robust choice for both production environments and metrology rooms. The design emphasises repeatable performance under practical conditions, giving technicians a dependable reference without extensive training. For organisations aiming to democratise precision across multiple stations, this small gauge block delivers a reliable basis for process control and iterative improvements in measurement consistency. Contact Metav Werkzeuge to discuss supply from our Emmerich facility and to arrange precise delivery and documentation for this ceramic gauge block Technical Data Article number: M324.001.47 SKU: M324.001.47 GTIN: 4054469142845 Label: Ceramic gauge block 1.47 mm, Grade 1 DIN 861/1 Manufacturer: Metav IndustryLine Tariff number: 90173000 Core data Nominal length: 1.47 mm Weight: 0.002 kg Grade: 1 Special features Material: Ceramic Standard: DIN 861/1 Category: End gauges (Endmasse) Image asset: m3240005-main.jpg FAQ What accuracy level does Grade 1 imply for this gauge block? Grade 1 indicates a high level of manufacturing precision in accordance with DIN 861/1; the block is produced to tolerances suitable for routine laboratory and workshop reference use as specified by that standard. Can this ceramic gauge block be used for calibrating micrometres and callipers? Yes. The ceramic gauge block 1.47 mm is intended as a length reference for verifying and checking micrometres, vernier callipers and similar measuring instruments during routine inspections. Is the block resistant to corrosion and magnetic interference? The ceramic construction is inherently corrosion‑resistant and non‑magnetic, which helps maintain surface quality and measurement integrity in workshop environments. How should the gauge block be stored to preserve its accuracy? Store the block clean and dry in a stable environment away from rapid temperature changes; a dedicated protective case and soft handling reduce the risk of surface damage and preserve its reference dimension. Does the product include calibration documentation? Standard delivery does not automatically imply an ISO 17025 calibration certificate; the product is supplied as a precision reference produced to DIN 861/1. For formal calibration services, consult Metav Werkzeuge about available documentation and calibration options. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.47 mm Gauge Block Grade 1 DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of DIN EN ISO 3650 conformity and hardened special steel for reliable length standards; the compact cross‑section and low mass make this gauge block a robust choice for precision setups. Order directly via Metav Werkzeuge or consult our advisors for application guidance. Gauge block 1.47 mm (DIN EN ISO 3650), Grade 1 — Metav IndustryLine The gauge block 1.47 mm is a precision length standard for workshop and calibration use, manufactured to DIN EN ISO 3650 and intended for repeatable setting and verification tasks. DIN EN ISO 3650 certified, Grade 1 Hardened special-steel construction Nominal length 1.47 mm for precise calibration Cross-section 30 × 9 mm for stable handling Consistent conformity for repeatable measurements Manufactured to DIN EN ISO 3650 and specified as Grade 1, this gauge block delivers the traceable length standard characteristics expected in calibration routines and quality control. The compliance with the international standard ensures reproducible interchangeability in stack sets and instrument setting applications, which supports efficient process control and reduces uncertainty in length‑related checks. For engineers and technicians seeking predictable performance, the standardised specification is the primary guarantee that measurement chains remain comparable across instruments. Material choice and handling benefits that extend service life Produced from hardened special steel, the block resists wear and maintains flatness under normal workshop use, providing stability over repeated wringing cycles. The compact 30 × 9 mm cross‑section (applicable for nominal lengths up to 10 mm) balances low mass with adequate rigidity, helping to minimise handling deformation while enabling quick placement in gauge stacks. With a nominal mass of 0.006 kg, the component is easy to manoeuvre during setting operations and reduces the risk of accidental damage compared with bulkier standards. Practical integration into calibration and setting workflows As a standard length element, this block functions as a reference in comparator set‑ups, slip‑gage stacks, and for setting micrometre and caliper references. The nominal 1.47 mm dimension is suited to fine adjustments and the incremental construction of precise stack lengths when combined with other blocks, enabling accurate replication of target dimensions without bespoke tooling. The simple geometry facilitates reliable wringing and rapid sequence work, making it suitable for both laboratory checks and routine workshop verification tasks. Reliability, identification and logistic details for purchasing Each item is identifiable via its SKU and listings, enabling traceable stock and procurement processes. The model is distributed under the Metav IndustryLine brand and intended for integration into systematic measurement routines where standardised lengths reduce setup time and measurement variance. Documentation supplied with the purchase will identify the product and its conformity details so that it can be recorded within inspection plans and quality records. Contact Metav Werkzeuge for application advice or to request the Metav IndustryLine gauge block 1.47 mm (SKU M319.0147.1); call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss fitment and delivery Technical data Article number: M319.0147.1 GTIN: 4054469131092 Norm: DIN EN ISO 3650 Grade: 1 Manufacturer: Metav IndustryLine Facts Nominal length: 1.47 mm Weight: 0.006 kg Cross-section: 30 × 9 mm (for nominals ≤ 10 mm) Customs tariff number: 90173000 Special features Material: hardened special steel Category: gauge block / end measure Label: Endmaß 1,47 mm, DIN ISO 3650, Güte 1 DIN ISO 3650 Compact format for precision setups FAQ What standard does this gauge block conform to? The gauge block conforms to DIN EN ISO 3650, specifying the production and tolerance requirements for end measures, and the Metav IndustryLine 1.47 mm block is supplied to Grade 1. Is the material suitable for frequent wringing and use? Yes; the Metav IndustryLine gauge block is made from hardened special steel, which is selected for wear resistance and stable surface properties under regular wringing. How is the block identified in inventory? The product is listed under SKU M319.0147.1 and GTIN 4054469131092, enabling straightforward tracking within procurement and quality systems. Can this block be combined with other blocks to build stack lengths? The 1.47 mm block is suitable for stack construction and is designed for reliable wringing and dimensional composition when used together with other standard length elements. Does the product data indicate an included calibration certificate? The product information specifies conformity to DIN EN ISO 3650 but does not state that a calibration certificate is included; calibration status is not indicated in the supplied data. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.47 mm Gauge Block, Grade 0, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Grade 0 accuracy to DIN EN ISO 3650 and a hardened special steel construction make this gauge an exacting reference for inspection and go/no-go checks; order the single gauge block directly via Metav Werkzeuge or ask our consultants if needed. Single gauge block 1.47 mm — Gauge block, DIN EN ISO 3650 Grade 0 (Metav IndustryLine) A single gauge block 1.47 mm intended as a high‑precision dimensional reference for calibration, laboratory inspection and tool setting in metalworking and quality assurance environments Precision to DIN EN ISO 3650 Grade 0 Solid hardened special steel block Nominal size 1.47 mm for reference Compact dimension 30 x 9 mm cross-section Consistent reference for dimensional control This gauge block is produced to DIN EN ISO 3650 and classified as Grade 0, providing a trusted reference for comparative measurements and instrument verification. The nominal 1.47 mm size serves as a stable standard when setting measuring devices, checking indicators or building master sets. Compliance with this international standard supports repeatable results across shifts and sites and reduces uncertainty in routine inspection, which is essential for production quality control and audit readiness. Robust material and compact handling for everyday use Manufactured from hardened special steel, the block combines wear resistance with a compact form factor. The small cross‑section (standard 30 x 9 mm for sizes up to 10 mm) allows simple handling and rapid stackability in sets while maintaining surface integrity under normal workshop conditions. The efficient dimensions and low mass make the block easy to position in fixtures or on reference surfaces, supporting fast setup without compromising stability during short measurement cycles. Integration into inspection workflows and supply reliability As a single, certified master measure, the block integrates into calibration benches, comparator fixtures and gauge sets for both workshop and laboratory use. Its traceable identity (SKU and GTIN listed below) simplifies inventory and quality documentation when included in verification routines. Metav IndustryLine supplies this reference as part of a broader portfolio that helps consolidate procurement and ensures dependable restocking for production and service departments. Choose the Metav IndustryLine single gauge block for a compact, standard‑compliant reference and contact Metav Werkzeuge for expert advice and reliable supply from Emmerich. Technical data SKU: M319.0147.0 GTIN: 4054469131085 Category: Gauge blocks Facts Nominal size: 1.47 mm Tolerance grade: 0 Standard: DIN EN ISO 3650 Weight: 0.006 kg Tariff number: 90173000 Materials and features Material: Special steel, hardened Cross-section: 30 x 9 mm (sizes ≤ 10 mm) Application: Reference and calibration tasks Brand: Metav IndustryLine FAQ What is the intended use for this gauge block? The single gauge block 1.47 mm is designed as a precision reference for calibration, inspection and tool-setting tasks within metrology and quality control workflows. Is the block compliant with international standards? Yes, the block meets DIN EN ISO 3650 and is supplied in Grade 0, ensuring compatibility with established calibration routines. Which material is used and how durable is it? The block is made from hardened special steel, offering good wear resistance for handling and repeated use in inspection environments; suitable for inclusion in gauge sets. How is the product identified for inventory and documentation? Identification is provided via SKU M319.0147.0 and GTIN 4054469131085, which aids traceability when the block is recorded in quality documentation. Can this block be combined with other gauge blocks? Yes, the nominal size and standard form factor allow combination into sets and use with stacking techniques common to gauge block practice. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.48 mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of a highly stable ceramic reference, precise Grade 1 tolerances and the compact 1.48 mm nominal size for reproducible small-scale calibration tasks. Order the ceramic gauge block directly via Metav Werkzeuge or ask our consultants if needed. Ceramic gauge block 1.48 mm, Grade 1 DIN 861/1 — precision reference for fine measurement A ceramic gauge block 1.48 mm, Grade 1 DIN 861/1 designed as a stable, low‑wear reference for high‑accuracy metrology tasks and fine calibration work in production and inspection environments High-stability ceramic material Grade 1 tolerance to DIN 861/1 Nominal size 1.48 mm for fine calibration Ultra-light weight 0.002 kg Stable reference for sub-millimetre calibration The combination of ceramic construction and a certified Grade 1 tolerance under DIN 861/1 yields a stable reference element for applications that require consistent dimensional checks in the sub-millimetre range. Owing to the material properties, the block exhibits excellent wear resistance and maintains its measuring faces over repeated wringing operations, which reduces drift between checks. This stability supports reliable bench and laboratory routines where reproducibility of measurement is critical. Low influence from handling and environment Ceramic gauge blocks are valued for their dimensional stability and lower susceptibility to corrosion compared with metallic references. The compact 1.48 mm nominal size and minimal mass make the block suitable for precise stack building and small-geometry verification, while the material's innate hardness contributes to long-term flatness preservation. For workshops and calibration labs that perform frequent short-range checks, this means fewer replacements and steadier reference behaviour over time. Practical integration into quality workflows The block serves as a fine reference element for setting master values, checking micrometre performance or verifying small features on measuring instruments. With its compact form and clear specification, the item is straightforward to record in traceability documentation and to store within a reference set. The included GTIN and the clear designation of Grade 1 (DIN 861/1) simplify inventory and compliance processes for quality systems that require unambiguous identification of calibration artefacts. Confidence via a specialised supplier network Sourcing precision items from a dedicated metrology supplier reduces procurement risk: a focused partner provides consistent product selection, logistic reliability and technical guidance on suitable application ranges. This ceramic reference item aligns with the market expectation for robust, long-lasting reference standards suited to both production control and workshop calibration tasks, supporting continuity in inspection routines. For precise reference elements and expert advice on matching gauge blocks to specific measurement chains, contact Metav Werkzeuge in Emmerich — our consultants will support selection and supply. Technical data Article number: M324.001.48 GTIN: 4054469142852 Customs tariff number: 90173000 Material: Ceramic Nominal size: 1.48 mm Grade: 1 (DIN 861/1) Weight: 0.002 kg Facts Nominal size: 1.48 mm Weight: 0.002 kg Grade: 1 (DIN 861/1) GTIN: 4054469142852 Special features Ceramic construction Category: Gauge block (end measure) Compact format for fine calibration and stack building Corrosion-resistant and low wear FAQ What applications suit a ceramic gauge block with this nominal size? The ceramic gauge block 1.48 mm, Grade 1 DIN 861/1 is ideal for fine calibration tasks, small-feature verification and as a stable reference in workshops and metrology labs where sub‑millimetre reproducibility is required. Is this gauge block delivered calibrated? The product listing does not indicate an ISO 17025 calibration; the ceramic gauge block is supplied as a precision Grade 1 reference. For calibrated certificates, please enquire separately with Metav Werkzeuge. How does a ceramic gauge block compare with steel blocks? Ceramic blocks generally offer improved corrosion resistance and maintained flatness over time at small sizes; the 1.48 mm ceramic element provides low wear and stable reference behaviour, which is beneficial for frequent short-range checks. Can this block be used in stack builds for setting master values? Yes — the compact, low-mass design and Grade 1 tolerance allow the block to be used in stacks for establishing fine master values or for verifying instrument zero points. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.48 mm Gauge Block Grade 0, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of Grade 0 conformity and hardened special steel construction for reliable, repeatable measurements; order directly via Metav Werkzeuge or consult our specialists for application advice. Single gauge block 1.48 mm — DIN EN ISO 3650, Grade 0 A single gauge block designed for high-precision length standards and laboratory calibration work in inspection benches and toolrooms. DIN EN ISO 3650 Grade 0 accuracy Hardened special steel for wear resistance Nominal length 1.48 mm, compact format Cross-section for small sizes: 30 x 9 mm Consistent accuracy for traceable measurements This gauge block delivers conformity with DIN EN ISO 3650 and Grade 0 quality, providing a dependable length standard for calibration and verification tasks. The nominal size of 1.48 mm is manufactured to dimensional stability and offers a compact reference for setting up micrometres, comparators and reference stacks. Emphasis on measurable performance supports productivity gains in quality control: a stable reference reduces setup time and contributes to faster, reproducible inspections. Robust material and finish for long service life Made from hardened special steel, the component resists wear and maintains flatness under normal workshop handling. The specified cross-section for sizes up to 10 mm is 30 x 9 mm, which balances rigidity and ease of handling in small stacks. The construction minimises deformation risk during repeat use, so dimensional integrity is preserved. For environments requiring straightforward handling and longevity, this material choice reduces replacement frequency and supports continuous operation. Practical use in calibration and inspection workflows The compact format and precise manufacturing make the block suitable for inclusion in gauge stacks or as an individual reference for calibration benches. Its small mass (approx. 0.006 kg) and manageable geometry allow efficient positioning between measuring faces without introducing unnecessary thermal lag. Users benefit from a direct, work-ready standard that integrates with common metrology routines and contributes to traceable quality assurance procedures on the shop floor and in laboratory settings. Integration into professional tool sets Supplied as an individually identified standard, the block fits into modular calibration sets or can be kept as a single-master reference. The combination of normative compliance and robust finishing supports use in inspection, tooling setup and instrument verification. Where consistency and reproducibility matter, the compact length standard acts as a reliable building block for measurement certainty across repetitive tasks. Contact Metav Werkzeuge for ordering and application support — Metav’s precision expertise in Emmerich ensures reliable delivery and practical advice for integration into existing calibration routines Technical Data Article number: M319.0148.0 GTIN: 4054469131108 Manufacturer: Metav IndustryLine Facts Nominal length: 1.48 mm Weight: 0.006 kg Cross-section (≤ 10 mm): 30 x 9 mm Cross-section (≥ 10.1 mm): 35 x 9 mm Special features Material: hardened special steel Standard: DIN EN ISO 3650 Grade: 0 Category: gauge block / end measure FAQ What level of accuracy does this gauge block provide? The gauge block conforms to DIN EN ISO 3650 at Grade 0, making it suitable as a high-precision length reference in calibration and inspection tasks. Is the material suitable for repeated workshop use? Yes — the block is manufactured from hardened special steel, chosen for wear resistance and long-term dimensional stability under normal handling. Can this single block be used in a reference stack? Yes — the 1.48 mm block is designed for integration into stacks or for standalone use as a calibration standard. What are the physical dimensions for handling and storage? For nominal lengths up to 10 mm the cross-section is 30 x 9 mm, offering a balance of rigidity and convenient handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.48 mm Gauge Block Grade 1, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
Benefit from Grade 1 accuracy combined with a hardened special steel construction and a precisely ground 1.48 mm nominal size for consistent go/no‑go referencing and laboratory traceability. Order the gauge directly via Metav Werkzeuge or consult the Metav team for application advice. End gauge 1.48 mm — Grade 1 precision (DIN EN ISO 3650) | Metav IndustryLine End gauge 1.48 mm — a compact, precision end standard for dimensional control and verification in production and metrology environments. Grade 1 accuracy (DIN EN ISO 3650) Precision ground 1.48 mm nominal size Hardened special steel construction Consistent results for production control and inspection The gauge delivers Grade 1 conformity to DIN EN ISO 3650, which ensures a clearly defined tolerance band for laboratory and workshop verification tasks. This normative classification translates directly into measurable benefits: fewer disputed measurements, reproducible verification of pin gauges and bore gauges, and a reliable reference for routine dimensional checks. The 1.48 mm nominal dimension is precision ground to provide an exact contact surface, reducing uncertainty when used as a reference standard and simplifying pass/fail decisions in production control. Durable construction that keeps accuracy over time Manufactured from hardened special steel, the end standard resists wear and mechanical damage during frequent use. The precision finish and compact geometry preserve functional geometry across repeated contact cycles, which reduces the need for frequent reworking of the inspection chain. A low mass item such as this one is easy to handle and less prone to dynamic effects during seating and measurement, supporting repeatable readings when used with gauges, comparator stands or bespoke fixtures. Practical fit for the inspection bench and traceability systems The compact design suits laboratory racks and inspection trays while the clear identification (SKU M319.0148.1, GTIN 4054469131115) facilitates inventory management and ensures the gauge can be logged in calibration systems. As an end standard, it integrates easily into calibration routines and quality documentation, helping to maintain traceability across production batches. For procurement and specification checks, the combination of DIN EN ISO 3650 conformity and hardened construction provides a technically transparent basis for decision‑making. Contact Metav Werkzeuge in Emmerich to discuss the M319.0148.1 end gauge, delivery options and application support — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M319.0148.1 GTIN: 4054469131115 Nominal size: 1.48 mm Material: Hardened special steel Standard: DIN EN ISO 3650 Grade: 1 Weight: 0.007 kg Facts Tariff number: 90173000 Cross-section up to 10 mm: 30 x 9 mm Cross-section from 10.1 mm: 35 x 9 mm Category: End gauges Special features Precision ground contact surface Compact, low-mass design Suited for reference and verification tasks Part of the Metav IndustryLine range FAQ What tolerance class does this gauge meet? The gauge is manufactured to Grade 1 tolerance in accordance with DIN EN ISO 3650, providing a defined tolerance band for laboratory and workshop use. What is the nominal size and how precise is it? The nominal size is 1.48 mm; the contact faces are precision ground to meet the Grade 1 requirements of DIN EN ISO 3650 for end standards. Which material is used for the gauge? This end standard is made from hardened special steel, chosen for wear resistance and dimensional stability during repeated use. How is the item identified for inventory and ordering? The item is listed as SKU M319.0148.1 with GTIN 4054469131115, which supports traceability and easy integration into procurement and calibration records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.49 mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of Grade 1 accuracy and the dimensional stability of ceramic material in a compact 1.49 mm reference element; the combination supports reproducible measurements and straightforward stack building for inspection tasks. Order or specify supply directly via Metav Werkzeuge or consult the technical team for integration advice. Ceramic gauge block 1.49 mm (Grade 1, DIN 861/1) — Metav IndustryLine Ceramic gauge block 1.49 mm (Grade 1, DIN 861/1) is a precision reference element for high‑repeatability length measurement and stack construction in calibration and inspection environments Ceramic construction for thermal stability Grade 1 accuracy to DIN 861/1 Nominal size 1.49 mm Very low weight 0.002 kg for easy handling Consistent reference for traceable length checks A ceramic slip gauge with a nominal size of 1.49 mm provides a stable reference standard for workshop and inspection use. The Grade 1 classification under DIN 861/1 signals suitability for precise comparative measurements and stack building where reproducibility matters. Ceramic's low sensitivity to rapid temperature changes reduces short‑term drift during typical workshop routines, so dimension checks and comparator setups remain consistent. As a compact reference element, it supports accurate increments when combined with other gauges to reach target lengths. Material advantages and safe handling that protect accuracy The chosen ceramic composition delivers wear resistance, chemical inertness and a low coefficient of thermal expansion, which together prolong functional life and help preserve metrological properties. Surfaces are prepared for reliable wringing, allowing secure stacks without mechanical clamps; wringing is the physical adhesion between polished faces that yields a flat, stable assembly. For routine care, keep the faces clean and dry, avoid abrasive contact and store the element in a padded box to prevent nicks — these measures retain the block’s reproducibility and reduce the need for rework. Practical applications and integration into quality workflows This compact reference element suits use in toolrooms, inspection benches and as part of a gauge set for incoming inspection or routine verification tasks. As a slip gauge, it can be combined with micrometre standards or comparators to create calibrated lengths for calibrating instruments or setting up precision fixtures. Procurement and supply are supported by a European quality filter that emphasises reliable stock and consistent delivery from Emmerich; this alignment with a trusted distributor simplifies replenishment and ensures that inspection routines remain uninterrupted. Contact Metav Werkzeuge in Emmerich to discuss specification, availability and integration of this Grade 1 ceramic gauge block (M324.001.49) — email info@metav-werkzeuge.com or call +49 2822 7131930 to arrange supply or technical consultation. Technical Data Article number: M324.001.49 GTIN: 4054469142869 Material: Ceramic Nominal size: 1.49 mm Tolerance grade: Grade 1 (DIN 861/1) Weight: 0.002 kg Customs tariff number: 90173000 ECLASS: 21170108 Facts Nominal size: 1.49 mm Weight: 0.002 kg Grade: 1 Customs tariff: 90173000 Special features Ceramic material DIN 861/1 compliance SKU: M324.001.49 Category: Measuring instruments > Gauge blocks FAQ What advantages does ceramic offer compared with steel gauge blocks? A ceramic gauge block such as the Ceramic gauge block 1.49 mm (M324.001.49) offers improved short‑term thermal stability and chemical inertness, which helps maintain dimensional constancy during routine inspection and reduces surface wear in many environments. Can this gauge block be wrung to other blocks and stacked for longer lengths? Yes, the polished faces permit reliable wringing, enabling the element to be combined with other slip gauges to build accurate lengths for calibration or setup work with comparators and micrometres. Is the Grade 1 classification suitable for workshop calibration tasks? Grade 1 (DIN 861/1) delivers a level of accuracy appropriate for many workshop and inspection duties where high reproducibility is required, making it a practical choice for routine comparative measurements. How should the reference element be stored to preserve accuracy? Store the gauge block in a clean, dry, padded environment and avoid contact with abrasive surfaces or sharp impacts; regular visual checks and gentle cleaning keep the faces free of contaminants that would impair wringing and measurement reproducibility. Which part number identifies this product for ordering and inventory purposes? The product is listed under SKU M324.001.49 and GTIN 4054469142869 for procurement and inventory tracking. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.49 mm Gauge Block End Measure Grade 1, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
Take advantage of high repeatability and material stability by choosing a hardened special steel master with DIN EN ISO 3650 conformity; the compact 1.49 mm nominal size and Grade 1 tolerance support reliable reference measurements in inspection and set-up tasks. Order the gauge block directly via Metav Werkzeuge or consult the Metav team for application advice. Gauge block 1.49 mm (DIN EN ISO 3650) — Grade 1, hardened special steel, Metav IndustryLine The 1.49 mm gauge block provides a compact, traceable reference dimension for workshop inspection, tool setting and calibration checks according to international gauge block standards DIN EN ISO 3650 accuracy grade 1 Hardened special steel construction Precision 1.49 mm nominal size Achieve consistent measurement results with an industry standard master The DIN EN ISO 3650 conformity and Grade 1 tolerance mean this gauge block is manufactured to a recognised international standard for end measures; that compliance provides a reproducible basis for routine checks and short-term masters in production and quality assurance. Using a standardised reference reduces the variability between tools and machines and supports efficient process control, so inspection routines run with fewer ambiguous results and less rework. Compact, robust construction for stable reference points Made from hardened special steel, the block combines wear resistance with a compact footprint. The specified cross-section for small sizes is 30 x 9 mm, which keeps thermal mass and handling effort low while providing a flat, stable contact face. At roughly 0.007 kg, the component is easy to position and rotate on slip plates or in comparator fixtures without introducing excessive handling error. The material choice helps maintain form and surface integrity under normal workshop conditions. Practical uses across workshop and laboratory tasks As a precision end measure, the block serves as a quick reference for go/no-go checks, comparative inspection and as a stackable element in build-ups for setting gauges or fixtures. The compact 1.49 mm dimension is especially useful for fine adjustments, small-part inspection and for assembling reference stacks where close increments are required. Compatibility with existing comparator setups and measurement benches makes the block a pragmatic addition to both manufacturing and maintenance toolsets. Best practice for handling, storage and verification Keep the M319.0149.1 block on a clean, dry slip plate or in a protective tray between uses to avoid nicks and contamination of the contact faces. Wipe contact surfaces with a lint-free cloth and a light application of appropriate corrosion inhibitor if long-term storage is required. Visual inspection before use and periodic verification against higher-level masters will preserve measurement confidence; document any checks in routine quality records to maintain traceability. For reliable reference standards from Metav IndustryLine, contact Metav Werkzeuge for ordering and specification advice — Metav Werkzeuge GmbH in Emmerich can advise on integrating the M319.0149.1 gauge block into existing inspection routines and on available verification options Technical data Article number: M319.0149.1 GTIN: 4054469131139 Category: Endmasse SKU: M319.0149.1 Facts Nominal size: 1.49 mm Weight: 0.007 kg Customs tariff number: 90173000 Tolerance grade: 1 Special features Material: special steel, hardened Standard: DIN EN ISO 3650 Cross-section (≤ 10 mm): 30 x 9 mm Manufacturer: Metav IndustryLine FAQ What standard does this gauge block conform to? The gauge block M319.0149.1 is manufactured to DIN EN ISO 3650, ensuring adherence to recognised dimensional and form criteria for end measures. What material is used and how durable is it? This Metav IndustryLine gauge block is made from hardened special steel, chosen for wear resistance and dimensional stability under routine workshop use. For which tasks is the 1.49 mm block most suitable? The 1.49 mm block is suited to fine setting, small-part inspection and as part of stacked references for tool setting and comparator work in manufacturing and maintenance. Is a calibration certificate supplied with the gauge block? The product data for M319.0149.1 does not specify delivery with a calibration certificate; calibration status is not indicated in the provided information. How should the block be stored and cared for to maintain accuracy? Store the gauge block in a clean, dry tray or on a slip plate, avoid contact with abrasive surfaces, clean with a lint-free cloth before use and perform periodic verification to retain measurement confidence. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.49 mm Gauge Block Single End, Hardened Special Steel, DIN EN ISO 3650 Grade 0 - Metav IndustryLine
Take advantage of the combination of DIN EN ISO 3650 Grade 0 conformity, a 1.49 mm nominal size, and hardened special steel for a compact, stable reference standard that supports repeatable inspection and calibration routines. Order the gauge block directly via Metav Werkzeuge or contact the consultants for specification advice. Single gauge block 1.49 mm — DIN EN ISO 3650 Grade 0 (Metav IndustryLine) The single gauge block 1.49 mm is a precision reference element for calibration, inspection and laboratory dimensional checks in metrology and quality-control environments. DIN EN ISO 3650 Grade 0 accuracy Hardened special steel for long service life Compact single block: 1.49 mm nominal size Ideal for calibration and laboratory use Consistent reference performance for reliable measurement results The block is manufactured to DIN EN ISO 3650 and rated Grade 0, delivering the dimensional stability expected for reference standards. With a nominal thickness of 1.49 mm, the element provides a definitive gauge point for verification tasks and manual calibration procedures. The standardised tolerance class ensures compatibility with international calibration routines and reduces uncertainty in routine checks. Using a certified reference that meets an established norm helps to minimise rework and supports reproducible production quality across batch runs. Robust construction and compact handling for daily use Made from hardened special steel, the block combines wear resistance with stable geometry over prolonged use. The small form factor and low mass make the element easy to handle in a laboratory or toolroom without adding thermal mass that could bias short measurements. The documented cross-section for sizes up to 10 mm (30 x 9 mm) applies here and supports secure clamping or insertion in fixtures. Corrosion-resistant surfaces and a finished ground face deliver consistent contact conditions, so readings remain dependable even after extended service. Practical integration into inspection workflows The single gauge block suits calibration benches, gauge sets and reference stacks where a compact, high-accuracy shim is required. Marked with a clear SKU and GTIN for inventory control, the component fits quality-management systems and traceability records. Its nominal dimension and conformity to the standard make it straightforward to include in regular verification loops, enabling maintenance of measurement capability and compliance with internal inspection plans. The block’s design supports efficient set-up and reduces adjustment time at inspection stations. For purchase or technical clarification, contact Metav Werkzeuge in Emmerich for direct ordering and expert guidance on integrating the DIN EN ISO 3650 Grade 0 single gauge block into existing calibration procedures. Technical Data SKU: M319.0149.0 GTIN: 4054469131122 Label: Single gauge block 1.49 mm, DIN EN ISO 3650 Grade 0 Facts Nominal size: 1.49 mm Weight: 0.007 kg Customs tariff: 90173000 Category: Endmasse (gauge blocks) Special features Material: Special steel, hardened Tolerance class: Grade 0 (DIN EN ISO 3650) Cross-section: up to 10 mm → 30 x 9 mm Intended use: Calibration, reference measurement FAQ What accuracy class does this gauge block meet? The single gauge block 1.49 mm from Metav IndustryLine is manufactured to DIN EN ISO 3650 Grade 0, providing the accuracy expected for laboratory reference standards. Is the gauge block suitable for use in a calibration laboratory? Yes. The 1.49 mm element is designed for calibration and inspection tasks and is compatible with reference stacks and verification procedures used in laboratory environments. What material is used and how does it affect durability? The block is made of hardened special steel, which offers good wear resistance and stable geometry for repeated contact-based measurements. How is the product identified for inventory and traceability? The item carries SKU M319.0149.0 and GTIN 4054469131122 to support inventory control and traceability within quality-management systems. Can this single block be combined with other gauge blocks? Yes. Matching the Grade 0 tolerance and the nominal dimension allows the element to be stacked or paired with other standard gauge blocks for composite reference sizes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.4mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Benefit from the combination of ceramic construction, Grade 1 DIN 861/1 accuracy and compact handling for dependable length standards in calibration and precision inspection; order directly via Metav Werkzeuge or contact our consultants for tailored advice. Ceramic gauge block 1.4 mm — Grade 1 length standard (DIN 861/1) by Metav IndustryLine A Ceramic gauge block 1.4 mm designed as a high-stability length standard for calibration benches, workshop metrology and fine mechanical assembly. Grade 1 accuracy (DIN 861/1) Ceramic body with low thermal expansion Nominal length 1.4 mm for fine measurements Lightweight 2 g for easy handling Reliable accuracy for routine calibration work This length standard delivers Grade 1 conformity to DIN 861/1, which defines tight geometric and dimensional tolerances for precision end standards. The nominal size of 1.4 mm is suitable for detailed verification of micrometre settings, gauge block stacks and comparison against master references. Thanks to its specified quality class, the block supports traceable checks where reproducibility and clear tolerance margins are required, helping to reduce rework and inspection uncertainty in daily metrology tasks. Material benefits that support measurement stability Manufactured from ceramic, the component combines dimensional stability with resistance to surface wear. Ceramic materials are selected for their low thermal expansion, which helps maintain length constancy across small temperature fluctuations commonly encountered in workshops and laboratories. The material choice also contributes to long-term surface integrity and resistance to common environmental influences, enabling sustained accuracy without frequent replacement. Compact handling and integration into calibration routines With a nominal mass of approximately 0.002 kg and a compact footprint, this gauge block is simple to handle and integrate into existing sets or comparison workflows. Its small size makes it especially practical for precision setups where fine adjustments are required, such as microassembly or instrument verification. Identification via the SKU M324.001.4 and GTIN ensures clear traceability within inventory systems and calibration records, supporting systematic documentation and quality management. Contact Metav Werkzeuge today for personalised advice on integrating Metav IndustryLine length standards into calibration schedules; our Emmerich location offers fast supply and technical guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M324.001.4 GTIN: 4054469142777 Tariff number: 90173000 Weight: 0.002 kg Material: Ceramic Nominal length: 1.4 mm Quality grade: 1 (DIN 861/1) Facts Nominal length: 1.4 mm Weight: 0.002 kg Quality grade: 1 GTIN: 4054469142777 Tariff code: 90173000 Special features Material: Ceramic Category: Endmasse (gauge blocks) SKU: M324.001.4 Manufacturer: Metav IndustryLine FAQ What tolerance class does this gauge block meet? The block conforms to Grade 1 (DIN 861/1) tolerances; this class provides the dimensional precision required for routine metrology and workshop verification using the Ceramic gauge block 1.4 mm (SKU M324.001.4). Is the ceramic material suitable for sensitive measurement environments? Yes. The ceramic construction offers low thermal expansion and good surface durability, which supports stable length values in temperature‑controlled workshop and laboratory settings when used as a reference standard. Can this block be used in calibration stacks and reference comparisons? The gauge block is intended for use as a length standard within stacks and comparison chains; its 1.4 mm nominal size makes it particularly useful for fine adjustments and verification tasks in precision metrology. How should the block be handled and stored to preserve accuracy? Handle with clean, lint‑free gloves or tweezers to avoid contamination and place the block in a protective case when not in use. Regular visual inspection and adherence to established calibration intervals will help maintain measurement reliability. Which applications are best suited to this size and grade of block? The compact 1.4 mm grade‑1 block is well suited to watchmaking, instrument calibration, fine mechanical assembly and laboratories requiring small-length masters for verification and tooling checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.5 mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of the combination of ceramic stability, Grade 1 DIN 861/1 accuracy and a compact 1.5 mm nominal size for reliable reference measurements; order the gauge block directly via Metav Werkzeuge or consult our specialists for application advice. Ceramic End Gauge 1.5 mm — Gauge Block, Grade 1 (DIN 861/1) | Metav IndustryLine A Ceramic End Gauge 1.5 mm designed as a stable reference standard for calibration, setting and dimensional inspection in workshops and metrology laboratories Ceramic material for thermal stability DIN 861/1 Grade 1 accuracy Compact 1.5 mm nominal size Precision and stability for traceable reference measurements The ceramic construction provides outstanding thermal stability and low thermal expansion compared with typical steel gauges, which reduces measurement drift during temperature changes. As a Grade 1 (DIN 861/1) gauge block, this item fulfils tight manufacturing tolerances and serves as a reliable reference standard for setting instruments or verifying measuring equipment. The small nominal size of 1.5 mm makes it particularly useful where fine dimensional checks are required and where a compact, repeatable mating surface is essential. Practical benefits for workshop and laboratory routines Hard, wear‑resistant ceramic surfaces keep contact faces stable over repeated use, extending service life and preserving calibration intervals. The block’s compact form factor and low mass support quick handling and minimize the influence of operator‑induced thermal transfer during short measurements. These properties translate into faster, more reproducible setups on stands, comparators or when used with master plates in inspection routines, reducing downtime and increasing throughput for small‑part production control. Designed for reliable calibration and long‑term use Supplied as a single reference gauge, the block integrates well into calibration chains and routine check procedures. The combination of material choice and Grade 1 tolerance supports confident measurement comparisons and traceability in quality systems. For laboratories that require documented conformity, this reference item can be incorporated into existing verification schemes and used alongside master sets to maintain consistent measurement results over time. For traceable ceramic reference standards from Metav IndustryLine, contact Metav Werkzeuge in Emmerich to discuss suitability for calibration or inspection tasks and to arrange supply of the M324.001.5 gauge block. Technical Data Article number: M324.001.5 Label: Ceramic End Gauge 1.5 mm, Grade 1 DIN 861/1 GTIN: 4054469142876 Tariff number: 90173000 Manufacturer: Metav IndustryLine Specifications Nominal size: 1.5 mm Tolerance grade: Grade 1 (DIN 861/1) Mass: 0.003 kg Special features Material: Ceramic Category: End gauges / Gauge block Intended use: Reference measurements, calibration, inspection FAQ What applications is this ceramic end gauge suitable for? The Ceramic End Gauge 1.5 mm from Metav IndustryLine is intended for reference measurements, instrument setting and calibration tasks in metrology laboratories and inspection workshops. How accurate is the gauge block and what does Grade 1 mean? Grade 1 (DIN 861/1) indicates a tight manufacturing tolerance suitable for precise inspection work; the Ceramic End Gauge 1.5 mm meets these standards as a reliable reference. Is the material resistant to wear and temperature changes? Ceramic offers high wear resistance and low thermal expansion, so the M324.001.5 gauge block maintains dimensional stability across typical workshop temperature variations. Can this block be integrated into a calibration routine? Yes, the block’s Grade 1 specification and stable ceramic surface make it appropriate for inclusion in calibration chains and routine verification procedures. What is the exact article number to order? Order using the article number M324.001.5; this SKU identifies the Ceramic End Gauge 1.5 mm (Grade 1) from Metav IndustryLine. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.5 mm Gauge Block Precision Ground Grade 1 DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of the combination of DIN EN ISO 3650 conformity, Grade 1 accuracy and a hardened special steel body for dependable reference measurements; order the gauge block directly via Metav Werkzeuge or consult our specialists for application advice. Gauge Block 1.5 mm (DIN EN ISO 3650) — Grade 1, hardened special steel by Metav IndustryLine The Gauge Block 1.5 mm (DIN EN ISO 3650) is a compact reference standard designed for precision length setting, calibration tasks and onsite quality checks in metalworking and inspection workflows DIN EN ISO 3650 compliance Grade 1 accuracy class Hardened special steel construction Compact, low-mass 1.5 mm reference Consistent reference accuracy for production control A measurement standard that meets DIN EN ISO 3650 and the Grade 1 tolerance provides a solid basis for repeatable inspection routines. The 1.5 mm nominal dimension functions as a calibration step or a building block when stacked with other reference standards, enabling reliable setting of gauges, micrometres and comparators. Wringing behaviour and flatness precision reduce measurement uncertainty during transfer measurements, which in turn improves process control and reduces the risk of rework on production lines. The compact geometry also simplifies handling in confined inspection benches. Robust material and compact design reduce measurement drift Constructed from hardened special steel, the reference retains geometry under regular use and resists surface wear, maintaining long-term reproducibility. The small mass and the specified cross-section (30 × 9 mm for sizes up to 10 mm) deliver stable handling and minimal thermal inertia, so repeat measurements show less drift when ambient conditions change. The lightweight build (approx. 0.007 kg) supports quick manipulation during serial checks while preserving the mechanical integrity expected of a workshop-grade reference standard. Seamless integration into calibration and inspection workflows Identification via M319.015.1 and GTIN 4054469131153 allows straightforward inventory and traceability in quality-management systems. As a Grade 1 end measure, it suits both production floor verification and routine inspection labs where clear, standardised comparators are required. Using this reference within a documented calibration routine assists in meeting internal quality targets and supports traceable measurement chains in supply relationships. The combination of recognised standard conformity and compact form factor makes it a pragmatic choice for workshops seeking dependable dimensional control. Choose Metav IndustryLine gauge blocks for dependable reference standards — contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or phone +49 2822 7131930 for technical guidance and order information Technical data Article number: M319.015.1 GTIN: 4054469131153 Label: Endmaß 1,5 mm, DIN ISO 3650, Güte 1 DIN ISO 3650 Norm: DIN EN ISO 3650 Facts Nominal size: 1.5 mm Tolerance class: Grade 1 Weight: 0.007 kg Cross-section: 30 x 9 mm (for sizes ≤ 10 mm) Tariff code: 90173000 Material & features Material: Special steel, hardened Category: End measure / gauge block Compact geometry for confined inspection benches Traceable identification via SKU and GTIN FAQ What tolerance does this gauge block offer? The gauge block complies with DIN EN ISO 3650 and is manufactured to Grade 1 tolerance, making the Gauge Block 1.5 mm (Metav IndustryLine, SKU M319.015.1) suitable for workshop and inspection tasks requiring defined reference accuracy. Which material is used for this reference standard? This end measure is produced from hardened special steel, chosen to minimise wear and to preserve flatness and stability during repeated wringing and handling. Can the block be used for setting micrometres and comparators? Yes — the 1.5 mm nominal dimension is ideal as a setting and transfer standard for micrometres, calipers and comparator setups in calibration and production control workflows. Is the product identified for inventory and traceability? Identification is provided via SKU M319.015.1 and GTIN 4054469131153, which supports integration into quality-management and inventory systems for traceable measurement chains. What cross-section is provided for this size? For sizes up to 10 mm the cross-section is 30 × 9 mm, delivering stable handling and compatibility with standard gauge-block holders and storage systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.5 mm Gauge Block, DIN EN ISO 3650 Grade 0, Hardened Special Steel - Metav IndustryLine
Supplied as a single, 1.5 mm reference gauge with DIN EN ISO 3650 Grade 0 conformity and made from hardened special steel, this end measure offers dependable dimensional stability and handling comfort for workshop and laboratory use. Order the gauge block directly via Metav Werkzeuge or contact our consultants for application-specific advice. Single gauge block 1.5 mm — Gauge block (DIN EN ISO 3650, Grade 0) by Metav IndustryLine A single single gauge block 1.5 mm designed as a precision reference for dimensional measurement and inspection tasks in quality control and metrology. DIN EN ISO 3650 Grade 0 accuracy Hardened special steel construction Nominal size 1.5 mm reference standard Cross-section 30 x 9 mm for secure handling Certified conformity that supports reproducible inspection results The gauge block complies with DIN EN ISO 3650 and is specified as Grade 0, which positions it for routine metrology and workshop inspection where traceable, repeatable measurements are required. Made from hardened special steel, the block combines wear resistance with minimal dimensional change under normal use. The compact 1.5 mm nominal size makes it suitable as a base reference in gauge sets and for fine comparative measurements on small features, supporting consistent process control and reduced measurement uncertainty. Robust geometry for safe handling and long-term stability A defined 30 x 9 mm cross-section for sizes up to 10 mm ensures comfortable handling and stable seating when stacked or used singly. The material choice and the ground faces provide a balance of mechanical stability and thermal behaviour appropriate for shop-floor and laboratory environments. The modest mass contributes to reduced thermal drift during brief contact measurements while the hardened surface reduces wear over repeated use, extending functional lifetime and lowering lifecycle cost. Practical advantages in calibration and inspection workflows As a single end measure, this product simplifies the creation of reference stacks and the verification of comparison measuring equipment. The Grade 0 classification offers a clear, recognised standard for acceptance criteria and exchange with inspection reports and quality documentation. Its compact size facilitates storage in gauge sets or protective trays and enables ergonomic use during repetitive checks, increasing throughput in routine inspection sequences. Compatibility and everyday use in the workshop and metrology lab The element integrates easily into existing reference sets and is compatible with standard handling tools for gauge blocks. Its specification and form factor allow technicians to perform quick comparative checks, establish master references for bench instruments, or verify small features on components destined for assembly. For organisations seeking reproducible measurement chains, the gauge block provides a tangible, standards-based solution that contributes directly to fewer measurement-related rejections. For procurement of the M319.015.0 single gauge block or for advice on integrating this reference into inspection routines, contact Metav Werkzeuge in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com for tailored guidance and supply. Technical data SKU: M319.015.0 GTIN: 4054469131146 Designation: Single gauge block 1.5 mm, DIN EN ISO 3650, Grade 0 Key measurements Nominal size: 1.5 mm Weight: 0.007 kg Cross-section: 30 x 9 mm Materials & standards Material: hardened special steel Standard: DIN EN ISO 3650 Grade 0 Category: Gauge block (end measure) FAQ What does Grade 0 mean for this gauge block? Grade 0 indicates conformity with DIN EN ISO 3650 for a general industrial reference level; the M319.015.0 is therefore specified for routine metrology and workshop inspection where recognised standardisation supports reproducible results. Is this single gauge block suitable for building a reference stack? Yes. The single gauge block is designed for stacking with other end measures and slip gauges to create reference heights or master values for comparative checks and calibration tasks. How should the gauge block be cared for to preserve accuracy? Store the block in a clean, dry environment and handle with clean gloves or tools to prevent oils and corrosion. Wipe contact faces with a lint-free cloth and suitable protector oil after use; avoid impacts and excessive temperature changes. Can this element be used directly for instrument calibration? The block is a precision reference intended for use in calibration and verification workflows; if a traceable calibration certificate is required, request the appropriate calibration service or documentation at the time of purchase. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.6 mm Ceramic Gauge Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of a ceramic reference that combines Grade 1 accuracy with exceptional thermal stability and wear resistance; the compact 1.6 mm nominal size ensures reliable use as a precision reference in inspection and setting tasks. Order directly via Metav Werkzeuge or consult the specialists for application guidance. Ceramic Gauge Block 1.6 mm, Grade 1 (DIN 861/1) — Metav IndustryLine The Ceramic Gauge Block 1.6 mm is a compact precision end measure designed as a stable reference for dimensional inspection, calibration jigs and laboratory use in metrology and quality control. Low thermal expansion ceramic Grade 1 accuracy to DIN 861/1 Precise 1.6 mm nominal size Lightweight and corrosion-resistant Reliable reference for dimensional control Made from ceramic, this compact gauge block serves as a stable reference standard where temperature-induced drift must be minimised. The block’s Grade 1 tolerance (DIN 861/1) provides a clearly defined accuracy class suitable for routine calibration checks and comparator reference tasks. The modest nominal size of 1.6 mm and the low mass contribute to fast temperature equalisation, which reduces waiting times and improves throughput in repetitive inspection work. The result is a dependable, repeatable datum that simplifies verification workflows and speeds up decision-making in production control. Stable performance across changing conditions The inherent material properties of ceramic deliver high thermal stability and good wear resistance, so dimensional integrity is preserved over extended use and handling. Where steel standards might show measurable expansion under small temperature differences, this end measure maintains closer conformity to nominal size, reducing measurement uncertainty in shop-floor environments or in laboratory benches without strict climate control. As a consequence, process capability benefits from fewer false rejects and more consistent calibration intervals — a clear rational advantage for organised inspection regimes. Compact handling with clear traceability The compact geometry and low weight make the block easy to handle and integrate into set-ups for gauge calibration, fixture checking or as part of a master set. Its nominal dimensions and clear grade marking support straightforward traceability when documenting quality records or issuing certificates. The combination of a robust ceramic surface and corrosion resistance reduces the need for frequent replacement, favouring long-term economy and predictable maintenance planning. For workshops and inspection rooms that require compact yet reliable standards, this end measure offers an efficient balance of precision and durability. For a reliable ceramic reference from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for detailed application advice or to arrange supply through the specialist team. Technical data Article number: M324.001.6 GTIN: 4054469142883 Weight: 0.003 kg Material: Ceramic Nominal size: 1.6 mm Grade: 1 (DIN 861/1) Core specifications Nominal size: 1.6 mm Weight: 0.003 kg Customs tariff number: 90173000 ECLASS: 21170108 Features Category: Endmasse (gauge block) Label: Keramik-Endmaß 1,6 mm, Güte 1 DIN 861/1 Manufacturer brand: Metav IndustryLine Story trigger: endmasse FAQ What tolerance class does this ceramic gauge block meet? The ceramic gauge block meets Grade 1 tolerance according to DIN 861/1, providing a clearly defined industrial accuracy class for routine calibration and inspection. Is the block suitable as a master reference in a workshop environment? Yes, the ceramic construction of the gauge block offers low thermal expansion and corrosion resistance, making it suitable as a compact master reference for many workshop inspection tasks. How should the gauge block be handled and stored to preserve accuracy? Handle the block with clean, dry hands or gloves and store it in a dry, dust‑free case; the ceramic surface resists corrosion but benefits from careful handling to avoid abrasion. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.6 mm Gauge Block, Grade 0, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of the combination of Grade 0 accuracy, a hardened special steel construction and a compact cross-section for a stable, traceable workshop reference; order the item directly via Metav Werkzeuge or ask the consultants for tailored advice. Single gauge block 1.6 mm — Grade 0, hardened special steel | Metav IndustryLine The Single gauge block 1.6 mm serves as a high-accuracy reference for calibration and dimensional verification in workshop and laboratory environments. Grade 0 accuracy to DIN EN ISO 3650 Hardened special steel body Compact cross-section 30 × 9 mm Nominal size 1.6 mm reference Reliable traceable reference for quality control The block is manufactured to DIN EN ISO 3650 and delivered as a Grade 0 end measure, offering a stable reference for measurement chains and quality assurance processes. With a nominal dimension of 1.6 mm, this artefact provides a reproducible datum for gauge block stacks and instrument checks, reducing uncertainty in comparison measurements. The standardised tolerance class means results can be directly compared with calibration certificates and inspection documentation, supporting objective decision-making in production control. Robust material and compact format for everyday handling Constructed from hardened special steel, the component combines wear resistance with thermal stability for routine use near machining centres. The compact 30 × 9 mm cross-section (applicable for nominal sizes up to 10 mm) keeps the block rigid while allowing easy handling and storage within a gauge block set. At around 0.007 kg, the weight promotes convenient manipulation during setup without compromising stability; the hardened surface resists scratches and preserves the measurement face geometry over repeated use, extending usable life in busy inspection environments. Streamlined integration into inspection routines As a single end measure, the block is suitable for assembling reference stacks, verifying instrument linearity and transferring calibrated dimensions across processes. Its form factor makes it straightforward to combine with other metric end measures in a reference set and to use for setting up micrometres, calipers and slip gauges. For teams aiming to strengthen traceability chains, the reference standard function of this component supports consistent calibration intervals and documented measurement results, ensuring reliable production decisions and audit readiness. For Grade 0 reference measurements and procurement assistance, contact Metav Werkzeuge to secure this Metav IndustryLine single gauge block (SKU M319.016.0) or to discuss delivery and calibration options via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M319.016.0 GTIN: 4054469131160 Standard: DIN EN ISO 3650 Nominal size: 1.6 mm Accuracy class: Grade 0 Facts Weight: 0.007 kg Cross-section: 30 × 9 mm (for nominal ≤ 10 mm) Tariff number: 90173000 Special features Material: Special steel, hardened Category: Single gauge block / end measure Intended use: Reference measurements, calibration routines FAQ What tolerance class does this end measure meet? The single gauge block conforms to Grade 0 according to DIN EN ISO 3650, offering a reproducible tolerance suitable for precision reference work. Is the block suitable for inclusion in a metric gauge block set? Yes; the block is designed as a single end measure (nominal 1.6 mm) and integrates with other metric end measures for stacked reference dimensions. What material is used and how does it affect longevity? Manufactured from hardened special steel, the block resists wear and maintains face geometry under regular inspection use, supporting long service life in workshop conditions. Can this part be used for routine instrument checks in production? The Metav IndustryLine single gauge block is intended for reference measurements and is appropriate for routine checks of calipers, micrometres and gauge stacks. What is the product identifier for ordering and inventory? The item is listed under SKU M319.016.0 and GTIN 4054469131160 for ordering and stock management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.6 mm Gauge Block, Hardened Special Steel, DIN EN ISO 3650 Grade 1 - Metav IndustryLine
Reliable process control through a combination of DIN EN ISO 3650 conformity, Grade 1 tolerance and hardened special steel construction ensures consistent measurement results; order the end gauge directly via Metav Werkzeuge or consult our specialists for application advice. End gauge 1.6 mm — DIN EN ISO 3650, Grade 1 (Metav IndustryLine) The End gauge 1.6 mm is a precision length standard intended for verification and adjustment tasks in metrology and workshop inspection, suitable for use in laboratories and production quality control. DIN EN ISO 3650 Grade 1 accuracy Hardened special steel construction Compact cross-section for stable handling Certified accuracy for consistent quality control The instrument is manufactured to DIN EN ISO 3650 and delivered in Grade 1, providing a clear reference for tight-tolerance checks. This classification means the gauge serves as a reliable length standard where repeatable measurements are required, supporting process control and acceptance testing. Using a standardised end gauge reduces variability in instrument set-up and helps maintain documented traceability in production records, which is particularly valuable in regulated or serial-production environments. Durable construction for long-term repeatability Made from hardened special steel, the gauge resists wear and preserves its reference surface over many handling cycles. The specified cross-section (30 × 9 mm up to 10 mm, 35 × 9 mm from 10.1 mm) provides a low-profile but rigid geometry that minimises bending and facilitates firm seating against mating surfaces. The compact mass (approx. 0.007 kg) and precise machining reduce operator-induced variation, so the standard remains wear-resistant and stable even under frequent inspection routines. Practical use and integration in inspection workflows Designed as a precision end standard, the gauge is suitable for verifying calipers, setting micrometers and checking fixture offsets. Its nominal dimension of 1.6 mm makes it useful for fine reference tasks and for building up calibrated stacks when combined with other standards. The compact format simplifies handling during gauge blocks comparison or instrument adjustment, while the clear conformity to international norms supports interchangeability and clear documentation in quality procedures. For precise reference standards from Metav IndustryLine, contact Metav Werkzeuge to secure the End gauge 1.6 mm and obtain specialist guidance tailored to inspection needs. Technical data Article number: M319.016.1 GTIN: 4054469131177 Tariff code: 90173000 Facts Nominal dimension: 1.6 mm Weight: 0.007 kg Grade: 1 Special features Material: Special steel, hardened Standard: DIN EN ISO 3650 Cross-section: up to 10 mm → 30 × 9 mm; from 10.1 mm → 35 × 9 mm FAQ What tolerance class does this end gauge meet? The end gauge meets Grade 1 tolerance according to DIN EN ISO 3650, providing a high level of dimensional precision suitable for standardised inspection tasks. Can this gauge be used to verify calipers and micrometers? Yes, the end gauge serves as a precision reference for verifying and adjusting calipers, micrometers and other length-measuring instruments, offering a stable nominal dimension of 1.6 mm. What is the material and why does it matter? Constructed from hardened special steel, the gauge offers wear resistance and dimensional stability, reducing surface degradation and extending the interval between regrinds or replacements. Is the gauge suitable for routine production checks? The gauge is intended for both laboratory and production settings; its conformity to DIN EN ISO 3650 makes it appropriate for repeatable routine checks and documentation in quality processes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1.7 mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of the combination of ceramic construction, Grade 1 tolerance and compact nominal size for a reliable workshop reference standard. Order the gauge directly via Metav Werkzeuge or contact their consultants for availability and complementary technical advice. Ceramic end gauge 1.7 mm, Grade 1 DIN 861/1 — Metav IndustryLine precision standard Ceramic end gauge 1.7 mm, Grade 1 DIN 861/1 provides a compact, stable reference for micro and fine‑tolerance measurements in laboratory and production inspection tasks. Ceramic construction for thermal stability Grade 1 tolerance to DIN 861/1 Nominal size 1.7 mm for fine standards Lightweight at 0.003 kg for easy handling Repeatable precision for small‑gap measurements The gauge block is manufactured to Grade 1 tolerances according to DIN 861/1, delivering a verified baseline for dimensional checks where micrometre‑scale reliability matters. With a nominal size of 1.7 mm, this compact standard suits fine‑tolerance inspection and comparative measurement methods. The narrow format supports tests on small assemblies and components where reproducible reference lengths reduce setup time and measurement scatter. The result is consistent data input for quality control processes and reduced rework. Material advantages that support measurement stability Constructed from high‑density ceramic, the end gauge benefits from low thermal expansion and excellent wear characteristics compared with many metallic standards. The material selection provides improved thermal stability during temperature fluctuations in the workshop or lab, helping to maintain dimensional integrity between checks. The ceramic surface also offers electrical insulation and reduced risk of corrosion, making the standard durable in typical inspection environments while remaining simple to handle because of its lightweight construction. Simple integration into inspection workflows This compact end standard is straightforward to introduce into existing metrology routines as a reference for calipers, micrometres and visual comparators. Its small footprint facilitates storage in inspection trays and incorporation into measurement jigs without extensive fixturing. Clear, repeatable reference lengths are particularly useful when establishing measurement chains for routine checks or when verifying instrument repeatability. The compact design therefore supports efficient throughput and reliable documentation in accredited quality systems. For supply, specification queries or to reserve the Metav IndustryLine ceramic end gauge, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to discuss availability and delivery. Technical data SKU: M324.001.7 GTIN: 4054469142890 Tariff number: 90173000 Weight: 0.003 kg Material: Ceramic Nominal size: 1.7 mm Grade: 1 (DIN 861/1) Numbers Nominal size: 1.7 mm Weight: 0.003 kg GTIN: 4054469142890 Tariff number: 90173000 Grade: 1 Special features Category: End gauge / gauge block ECLASS: 21170108 Label: Ceramic end gauge 1.7 mm, Grade 1 DIN 861/1 Storytrigger: endmasse FAQ What level of tolerance does this end gauge provide? The ceramic end gauge is manufactured to Grade 1 in accordance with DIN 861/1, offering a fine tolerance suitable for precision reference tasks. Is the material suitable for temperature‑sensitive measurements? Yes, the ceramic construction gives low thermal expansion and improved dimensional stability compared with many metals, which supports temperature‑sensitive measurement routines. Can the gauge be used with calipers and micrometres? This compact end gauge serves as a short reference for calibrating and checking calipers, micrometres and comparators, helping to confirm instrument repeatability. What is the exact nominal size and handling weight? The nominal size is 1.7 mm and the gauge weighs 0.003 kg, making it easy to position and store within inspection sets. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
ensure traceable length calibration with gauge blocks
gauge blocks, also called slip gauges or end gauges, are precision length standards designed to transfer exact measures during calibration and setup. Manufactured and graded for metrological use, they provide the reference dimensions needed to verify and adjust measuring instruments in industrial workshops and calibration labs.
how gauge blocks work and where they are essential
gauge blocks are used to create known lengths by wringing individual blocks together or by using a single block as a reference. length calibration in industry commonly relies on parallel gauge blocks, while angle, cylinder and sphere end gauges serve specialised tasks. these blocks are produced in steel, ceramic or carbide, and their material choice balances wear resistance with thermal behaviour. regular calibration—typically performed annually—by DAkkS-accredited laboratories ensures traceability. the highest-precision reference work, class K, is certified by the PTB using laser techniques; classes 0, 1 and 2 are tested under progressively less controlled conditions (class 0 in a climate-controlled lab, class 1 in a standard measurement room, class 2 in production).
measurable benefits that cut downtime and uncertainty
- consistent, traceable length standards reduce rework and measurement disputes by enabling reliable instrument calibration.
- choosing the correct material (steel, ceramic, carbide) extends service life and limits wear in high-use environments.
- selecting the right accuracy class (K, 0, 1 or 2) matches calibration effort to application needs and avoids over‑specification.
- annual calibration by accredited labs maintains documented compliance and supports quality systems such as ISO.
why Metav is a smart partner for precision standards
Metav combines specialist knowledge with a broad range of measurement technology, making the procurement of gauge blocks straightforward and dependable. with over 48,000 customers and more than 250,000 products stocked from Emmerich, Metav acts as a pragmatic quality filter for European workshops, reducing supplier complexity and ensuring consistent supply.
In short, gauge blocks deliver traceable, material‑appropriate and class‑matched references that keep calibration workflows efficient and auditable.
faq
what materials are gauge blocks available in and why does it matter?
gauge blocks are typically supplied in steel, ceramic or carbide. material choice affects wear resistance, stability and thermal expansion; selecting the right material for your environment optimises longevity and measurement stability.
how often should gauge blocks be calibrated?
industry practice is an annual calibration cycle, carried out by DAkkS-accredited laboratories, though frequency can be increased depending on usage and required uncertainty.
what do the accuracy classes k, 0, 1 and 2 indicate?
the classes denote graded tolerances and test conditions: K is the highest precision (certified by PTB with laser measurement), class 0 is checked under climate-controlled lab conditions, class 1 in a normal measurement room and class 2 in production environments.
are parallel gauge blocks always used for length calibration?
yes; for length calibration the parallel gauge blocks are the primary standard because they provide exact planar faces for wringing and stacking to create precise lengths.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com