Gibt es einen Hahn und Kolb Online Shop?

Take advantage of the combination of compact design, reliable internal coolant and proven compatibility with XNKT 0604 inserts for uninterrupted production. Order the component directly via Metav Werkzeuge or consult the Metav team for technical clarification. Corner tool head T853-1TM – 40 mm diameter, internal coolant (Teknik Makina) The Corner tool head T853-1TM is a compact turning head engineered for rigid shoulder and finishing operations using XNKT 0604 indexable inserts, with integrated internal coolant for improved chip control. 40 mm diameter for compact tooling Internal coolant for improved chip evacuation Compatible with XNKT 0604 indexable inserts Robust 90° cutting angle, six usable edges Space-saving rigidity that maintains process stability The compact 40 mm body offers a high stiffness-to-size ratio that benefits machines with limited turret clearance. Designed for precise shoulder work, the head’s 90° geometry provides consistent plunge and facing capability while the slim 40 mm diameter reduces overhang and vibration. Paired with standard XNKT 0604 inserts, the assembly maintains repeatable positioning and reduces set-up variation, which translates into fewer tool changes and improved cycle-time reliability. The low mass also eases handling and quick fixture changes on fast-turning lathes. Integrated cooling and chip management to protect tool life Equipped with internal coolant, the head supplies cutting fluid close to the cutting edge, assisting both chip evacuation and thermal control during higher feed rates. Delivering coolant directly to the insert interface helps maintain cutting-edge integrity and reduces built-up edge, which in turn supports a more stable surface finish and extends the effective life of indexable tips. For workshops increasing throughput or tackling tougher alloys, this cooling path reduces thermal shock and the risk of premature edge failure, supporting longer uninterrupted production runs. Quick maintenance and secure fastening for minimum downtime Assembly and maintenance are straightforward: the insert is clamped with an M3x7 Torx screw and requires a T8 driver for secure fixing. The head accepts inserts with six usable edges, allowing economical indexing before replacement. These standardised fastening elements simplify spare-part management and speed up insert changes on production lines. The head’s balanced design and modest weight make it suitable for frequent tool swaps without sacrificing repeatability, preserving machine uptime and lowering indirect labour costs. Recommended applications and supply reliability This tool head is intended for workshops and production environments that use XNKT 0604 indexable inserts and require compact, coolant-fed tooling for shoulder, facing and finishing operations. Compatible inserts are supplied by Korloy, ensuring a wide choice of grades for steel, stainless or general-purpose turning where insert selection dictates performance. For technical questions or to confirm suitability for specific materials and cutting conditions, Metav’s specialists are available to advise on insert grades, clamping torque and coolant pressure to match the machining task. Contact Metav Werkzeuge for tailored application advice on the Teknik Makina corner tool head T853-1TM and secure reliable supply directly from Emmerich. Technical data SKU: T853-1TM Manufacturer: Teknik Makina ECLASS: 21181015 Product type: Corner tool head Facts Diameter: 40 mm Overall length: 40 mm Weight: 0.219 kg Cutting angle: 90° Cutting edges: 6 Special features Internal coolant For XNKT 0604 indexable inserts Compatible insert manufacturer: Korloy Torx key: T8 Torx screw: M3x7 FAQ What insert type fits this tool head? The corner tool head accepts XNKT 0604 indexable inserts; compatible grades from Korloy are commonly used for varied turning tasks. Does the head provide coolant supply to the insert? Yes, the T853-1TM features internal coolant delivering fluid close to the cutting edge for improved chip control and thermal stability. How many times can an insert be indexed in this system? The tool set-up accommodates inserts with six usable edges, enabling multiple indexings before replacement. Which fastener is used to secure the insert? Inserts are secured with an M3x7 Torx screw tightened using a T8 driver for reliable clamping. Is this head suitable for compact turret applications? Its 40 mm diameter and 40 mm length make it suitable for tight turret clearances while maintaining stiffness for shoulder work. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combining a compact 40 mm diameter and integrated internal coolant with a rigid 90° cutting geometry, this corner milling head delivers stable square‑shoulder machining and efficient chip control; order via Metav Werkzeuge or consult our advisors for application advice. Corner milling head T510-1TM — 40 mm, internal coolant, for XOMX 1204 indexable inserts (Teknik Makina) Corner milling head T510-1TM for precision shoulder and face work, compatible with XOMX 1204 indexable inserts and equipped with internal coolant for improved tool life. 40 mm diameter for compact machining Internal coolant for improved tool life 90° cutting angle for square shoulder cuts Four cutting edges for economical index changes Compatible with XOMX 1204 inserts (SECO) Stable machining with predictable results The compact 40 mm diameter head is engineered to reduce overhang and increase rigidity, which leads to stable cutting conditions and repeatable results. The 90° cutting angle is established for true square‑shoulder operations and helps to simplify setup and downstream inspection. Because the design concentrates mass close to the spindle, vibration is minimised and surface finish consistency is improved, making the tool head a reliable choice for medium‑duty external machining where dimensional accuracy matters. Cooling integration that extends tool life Integrated internal coolant supplies cutting fluid directly to the cutting zone, supporting efficient chip evacuation and heat control. This targeted coolant flow reduces thermal loading on both the insert and the holder, which in turn lengthens insert life and maintains cutting edge geometry for longer intervals. The coolant channel is implemented without compromising the holder’s rigidity, so machining performance is preserved while maintenance intervals are extended, lowering total operating costs per component. Economical indexability and fast clamping Equipped with four cutting edges, the head allows multiple index changes before replacement, improving cost efficiency during batch production. Fast clamping is achieved with the supplied Torx screw specification M3.5x8.5 and T10 Torx key, which ensures quick, repeatable insert retention and minimal downtime during tool change. The mechanical fixation and geometric alignment have been optimised to keep runout low, so concentricity and part tolerances remain within tight limits for serial machining. Compatibility and workshop integration The head is designed for use with XOMX 1204 indexable inserts and is documented as compatible with SECO insert types, which simplifies tool sourcing and grade selection. With an overall length of 40 mm and a mass of 0.25 kg, the holder suits compact toolholders and reduced‑overhang setups. Where material selection or insert grade needs clarification, the tool head’s compatibility with widely available insert families supports flexible process planning and fast integration into existing tooling systems. Contact Metav Werkzeuge today to discuss Teknik Makina’s T510-1TM corner milling head, request application recommendations or arrange a technical consultation via info@metav-werkzeuge.com or +49 2822 7131930. Technical data SKU: T510-1TM Manufacturer: Teknik Makina ECLASS: 21181015 Label: 40mm Eckmesserkopf XOMX 1204 L40mm mit Innenkühlung Core data Diameter: 40 mm Overall length: 40 mm Weight: 0.25 kg Cutting angle: 90° Number of cutting edges: 4 Torx screw: M3.5x8.5 Torx key: T10 Special features Internal coolant For XOMX 1204 indexable inserts Compatible with SECO insert types FAQ Which inserts fit this head? The corner milling head accepts XOMX 1204 indexable inserts; Teknik Makina’s T510-1TM is specified for this insert family and is compatible with SECO‑type grades to match material and finish requirements. Is internal coolant delivered with the holder? Yes, the holder features internal coolant channels integrated into the body to feed fluid directly to the cutting zone for improved chip control and tool life. What fastening hardware is required for insert clamping? Insert clamping uses a Torx screw M3.5x8.5 tightened with a T10 Torx key, which provides secure, repeatable retention for the indexable inserts in the T510-1TM. Can this head achieve true square shoulders? The 90° cutting angle and compact 40 mm design are intended for square‑shoulder and face operations; the geometry supports accurate right‑angled features when combined with appropriate setup and inserts. Which holder length and overhang conditions are recommended? With an overall length of 40 mm and reduced mass, the head is suited to short overhang applications where rigidity and minimised runout are priorities; consult Metav Werkzeuge for specific holder compatibility. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid tool head that combines a 90° cutting angle with compatibility for standard APMT 11T3 indexable inserts to produce accurate perpendicular faces and reduced setup time — order directly via Metav Werkzeuge or consult our tooling advisers for integration into existing toolholders. Corner milling head T250TM – 90° head for APMT 11T3 inserts (Teknik Makina) The Corner milling head designed for precise 90° shoulder machining and reliable fit with standard APMT 11T3 indexable inserts, suitable for general CNC milling and finishing of perpendicular faces. Corner milling head for APMT 11T3 inserts 90° cutting angle for square shoulders 16 mm shank for secure toolholder fit Secured with M2.5x5.5 Torx screw Accurate right‑angle faces with indexable inserts The compact head provides a 90° cutting angle that ensures true square shoulders and consistent contact geometry on machined parts. Matched to the APMT 11T3 insert form, the head allows rapid replacement of cutting edges while keeping clamping repeatability high. For production environments where setup time and workpiece tolerances matter, this configuration reduces manual dressing and aligns with standard indexable tooling workflows to maintain throughput and part conformity. Rigid design for stable machining and extended tool life A firm connection via the 16 mm shank and a compact envelope of Ø 40 mm with an overall length of 40 mm gives the head the stiffness required for short‑overhang operations. The low mass (approx. 0.22 kg) helps reduce centrifugal effects and vibration at higher spindle speeds, resulting in improved surface finish and longer insert life. The construction supports repeatable runs on CNC lathes and milling centres where stability and micrometre‑level consistency translate directly into lower rework rates. Straightforward clamping and quick servicing Insert retention is provided by a M2.5x5.5 Torx screw, tightened with a T8 key, so insert changes are fast and tool maintenance is uncomplicated. The head is compatible with Korloy inserts in the APMT 11T3 format and can be stocked as a single, reliable component to reduce tooling inventory complexity. Supplied as a compact, ready‑to‑mount head, the unit is designed to integrate smoothly into existing toolholder systems and to minimise downtime during changeovers. For precise 90° shoulder machining with proven compatibility, request the T250TM corner milling head from Metav Werkzeuge — call +49 2822 7131930 or eMail info@metav-werkzeuge.com to discuss toolholder integration and delivery from our European stock. Technical data Article number: T250TM Manufacturer: Teknik Makina SKU: T250TM Product type: Corner milling head Facts Diameter: 40 mm Overall length: 40 mm Shank diameter (take‑up): 16 mm Weight: 0.22 kg Cutting angle: 90° Cutting edges: 5 Special features For APMT 11T3 indexable inserts Compatible with Korloy APMT 11T3 inserts Torx screw M2.5x5.5 Torx key size T8 SKU reference: T250TM FAQ What inserts fit this head? The T250TM corner milling head accepts APMT 11T3 format indexable inserts; Korloy inserts with that geometry are compatible. Which screw and key secure the insert? The insert is secured with an M2.5x5.5 Torx screw, tightened using a T8 key; the specification ensures reliable clamping of the insert seat. Is the head suitable for finishing square shoulders? Yes, the 90° geometry of the head is intended for producing true right‑angle faces and is suitable for finishing operations where perpendicularity is critical. What are the critical dimensions for toolholder selection? Key dimensions: shank take‑up 16 mm, envelope Ø 40 mm, overall length 40 mm; these determine compatibility with standard toolholders. Which SKU and brand should be referenced when ordering? Order under SKU T250TM from Teknik Makina; referencing the SKU ensures the correct corner milling head is supplied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the 90° cutting geometry, secure APKT 1604 insert compatibility and a compact 16 mm shank for stable mounting; the result is consistent shoulder finishes, reduced vibration and reliable cycle times — order directly via Metav Werkzeuge or consult our specialists for integration advice. Corner Tool Head T180TM — 90° holder for APKT 1604 indexable inserts (Teknik Makina) The Corner Tool Head T180TM is a 90° right‑angle toolholder designed for precise shoulder turning and facing using APKT 1604 indexable inserts. 90° cutting angle for shoulder turning Compatible with APKT 1604 Korloy inserts 16 mm shank for secure toolholder mounting 40 mm head diameter, three cutting edges Accurate shoulder turning with repeatable geometry The right‑angle head delivers a 90° cutting angle that is engineered to produce consistent shoulder faces and axial transitions. With the ability to accept APKT 1604 inserts, the holder provides a predictable cutting edge position that reduces set‑up time and minimises rework. The toolholder’s geometry supports stable chip formation and predictable tool engagement, which together contribute to improved process reliability on turning centres and live‑tool applications. Stable mounting and straightforward insert retention Designed with a 16 mm shank, the holder ensures secure clamping in standard toolposts and turret adaptors, reducing the risk of chatter during interrupted cuts. Insert retention is achieved with a Torx M4x10 screw and requires a T15 key for removal and indexing, allowing rapid changeover of inserts when wear occurs. The compact head — 40 mm diameter with an overall length of 45 mm — keeps overhang minimal, improving rigidity and tool life while the nominal mass (0.267 kg) helps to dampen vibration in short‑overhang setups. Suited to steelworking and productivity improvement Matched with Korloy APKT inserts, this right‑angle head is positioned for general steel machining tasks where precise shoulders and small stepovers are required. The three cutting edges on the head support reliable cutting engagement and even wear distribution, extending the useful life of both insert and holder. In production contexts, the combination of robust mounting and standardised insert format enables faster tool changes and steady cycle times, translating into measurable productivity gains on multi‑batch turning operations. For enquiries about integrating the Teknik Makina corner head into workshop tooling systems or to secure supply from Metav Werkzeuge’s Emmerich quality hub, contact Metav Werkzeuge for personalised advice and immediate processing. Technical data Article number: T180TM Brand: Teknik Makina Description: 90° corner tool head for APKT 1604 indexable inserts Compatible inserts: APKT 1604 Compatible insert manufacturer: Korloy Core specifications Shank diameter: 16 mm Head diameter: 40 mm Overall length: 45 mm Weight: 0.267 kg Cutting angle: 90° Number of cutting edges: 3 Special features Torx screw: M4x10 Torx key size: T15 Intended application: shoulder turning / facing ECLASS: 21181015 FAQ Which insert type fits this holder? The holder accepts APKT 1604 indexable inserts; it is specified for this insert format and is compatible with Korloy APKT 1604 grades. What shank size is required for mounting? A 16 mm shank connection is required for clamping in standard toolposts or turret adaptors. Which screw and key are used for insert clamping? Insert retention uses a Torx M4x10 screw; a T15 Torx key is required for tightening and removal. Is this head suitable for heavy‑duty roughing? The right‑angle head is optimised for shoulder turning and facing with short overhangs; suitability for heavy‑duty roughing depends on machine rigidity and cutting parameters. What are the key dimensional limits to consider for setup? Important dimensions are the 40 mm head diameter and 45 mm overall length; these define clearance and overhang for toolstation planning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, indexable-insert system that combines precise Ø 40 mm cutting, five reliable cutting edges and a rigid 32 mm shank for stable machining and reduced tool-change time. Order the tool directly via Metav Werkzeuge or request advice from our consultants for an efficient integration into the production line. S477-2TM Shank milling cutter for 4NKT 0603 indexable inserts, Ø 40 mm (Teknik Makina) The S477-2TM is a shank milling cutter engineered for industrial milling with 4NKT 0603 indexable inserts, offering a compact cutting diameter and a long overall length for secure tool engagement in medium to heavy operations. For 4NKT06 indexable inserts Ø 40 mm cutting diameter Five cutting edges for steady performance Shank Ø 32 mm for high rigidity 200 mm overall length for stable setup Higher throughput with reliable insert technology The cutter is built around indexable inserts, enabling economical machining by replacing only the cutting tips rather than the whole tool. With a Ø 40 mm cutting diameter and five cutting edges, the tool sustains material removal rates while maintaining surface quality; fewer interruptive tool changes translate into measurable productivity gains on batch runs and serial production. Secure holding and quick insert changes reduce downtime A shank Ø 32 mm delivers stiffness at the holder interface, reducing deflection and improving dimensional repeatability when cutting. Inserts are fastened with an M3x6.5 Torx screw; the corresponding T8 key allows swift and secure replacement. This combination of a rigid shank and accessible fastening minimises setup times and supports predictable cycle planning for workshop teams. Dimensioned for practical workshop handling and setup The tool is Taegutec-compatible, designed specifically for the 4NKT06 insert family, and offers a 200 mm overall length with a 40 mm cutting segment. These dimensions provide a balance between reach and rigidity, while the listed mass of 1.395 kg contributes to stable running without excessive inertia—helpful when optimising spindle load and fixture design for reliable machining. Robust construction for repeated industrial use Manufactured by Teknik Makina, the tool combines precise engineering with practical serviceability. The robust build supports frequent indexing cycles and the modular insert concept lowers long-term tooling costs, making this cutter a pragmatic choice for workshops seeking both performance and predictable lifecycle costs. For dependable milling performance choose the S477-2TM by Teknik Makina — contact Metav Werkzeuge for product guidance and integration support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S477-2TM Manufacturer: Teknik Makina Item name: Shank milling cutter for 4NKT 0603 indexable inserts ECLASS: 21180806 ETIM: EC011860 Core specifications Cutting diameter: 40 mm Shank diameter: 32 mm Number of cutting edges: 5 Cutting length: 40 mm Overall length: 200 mm Weight: 1.395 kg Compatibility & features For indexable inserts: 4NKT06 Compatible inserts manufacturer: Taegutec Torx screw: M3x6,5 Torx key: T8 SKU: S477-2TM FAQ How many cutting edges does the tool have? The S477-2TM is equipped with five cutting edges, designed to sustain continuous milling and to allow multiple reindexes before a full insert replacement is needed. Which inserts fit this holder? This tool accepts 4NKT 0603 indexable inserts and is specified as compatible with Taegutec inserts of that designation. What are the main dimensions to consider for setup? Key dimensions include a 40 mm cutting diameter, a 32 mm shank diameter and a 200 mm overall length; the cutting length is 40 mm and the tool weight is 1.395 kg. How are the inserts secured to the cutter? Inserts are secured with an M3x6.5 Torx screw; assembly and removal are performed using a T8 Torx key for consistent and rapid indexing. Is this tool suitable for heavy-duty machining? The combination of a rigid 32 mm shank and multiple cutting edges makes the cutter suitable for demanding production tasks where stability and tool life are priorities. What should be considered during insert replacement? When changing inserts, use the specified T8 key and M3x6.5 screw; ensure screws are torqued to the toolholder manufacturer's recommendation and that the seating surface is clean before reuse. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust 32 mm shank and a 40 mm cutting diameter to increase material removal rates while maintaining stable toolholding; the design accepts ADMT 1204 indexable inserts for fast changeovers and consistent results. Order the cutter via Metav Werkzeuge or contact the consultants for specification matching and application advice. Shank milling cutter S506TM – indexable-insert cutter with 40 mm diameter and 32 mm shank by Teknik Makina Shank milling cutter S506TM designed for heavy-duty milling tasks with ADMT 1204 indexable inserts, suitable for shoulder and face milling in industrial production Solid shank 32 mm for stable clamping 40 mm cutting diameter for broad material removal Compatible with ADMT 1204 indexable inserts Includes M3x7 Torx clamp screw and T8 key Consistent clamping for accurate finishing A stable toolholder is crucial for repeatable results; the 32 mm shank of this milling cutter delivers secure clamping that reduces vibration and runout. With a mass of 0.968 kg, the tool maintains balance during machining, which supports improved surface quality and prolonged insert life. This means fewer rework cycles and more predictable production throughput for workshops focused on reliability. High removal capacity with controlled engagement The cutter’s 40 mm diameter combined with a 50 mm cutting length enables efficient material removal on wide faces and shoulders. The geometry provides a 90° cutting angle, ideal for square shoulder milling where perpendicular faces are required. Equipped with 5 cutting edges, the tool distributes cutting loads to maintain steady power consumption and reduces the need for frequent index changes, delivering measurable productivity gains on suitable machines. Fast insert changes and secure fixation Engineered for indexable inserts ADMT 1204, the holder is compatible with inserts from Walter, offering flexibility in supply and grade selection. Insert clamping uses an M3x7 Torx screw and a T8 key, allowing quick and secure replacements with consistent seating. This straightforward clamping concept reduces downtime during tool servicing and supports a predictable setup routine on the shop floor. Designed for industrial applications and durable performance The cutter addresses general milling tasks in metalworking environments where robust performance is required. Its 150 mm overall length and balanced construction make it suitable for both roughing and semi-finishing operations where users prioritise stability and repeatability. As part of Teknik Makina’s cutting tool range, the tool aligns with standard workshop practices and integrates easily into existing tooling systems. Contact Metav Werkzeuge to discuss fitment, request detailed machining recommendations for Teknik Cutting Tools' S506TM shank milling cutter, or obtain a tailored quotation; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S506TM Description: Shank milling cutter for ADMT 1204 indexable inserts Facts Diameter: 40 mm Shank diameter: 32 mm Cutting length: 50 mm Overall length: 150 mm Cutting edges: 5 Cutting angle: 90° Weight: 0.968 kg Special features Compatible inserts: ADMT 1204 Compatible insert manufacturer: Walter Clamp screw: M3x7 Torx Key: T8 Suitable for shoulder and face milling FAQ Which inserts fit this cutter? The shank milling cutter accepts ADMT 1204 indexable inserts; it is compatible with inserts from Walter and intended for those standard insert geometries. What are the main dimensions of the tool? The cutter has a 40 mm diameter, 32 mm shank, 50 mm cutting length and 150 mm overall length (SKU S506TM). Is the clamp screw and key supplied? Yes, the tool is supplied with an M3x7 Torx clamp screw and requires a T8 key for insert clamping and replacement. Which operations is the tool best suited for? The cutter is optimised for shoulder and face milling where a 90° cutting angle is needed; it is suitable for roughing and semi-finishing tasks in production environments. How can tool life be maximised? For the S506TM shank cutter, correct speeds, feeds and stable clamping are essential; using the appropriate insert grade for the workpiece material and ensuring secure seating with the M3x7 screw will extend service intervals. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from efficient material removal, secure Torx clamping and broad compatibility with APKT 1604 indexable inserts for uninterrupted production. Order directly via Metav Werkzeuge or consult our specialists for application advice. S264TM Shaft milling cutter – Ø40 mm, 4 flutes (Teknik Makina) The S264TM is a shaft milling cutter engineered for face and shoulder milling using APKT 1604 indexable inserts, optimised for robust performance in production workshops. Solid 25 mm shank diameter Suitable for APKT 1604 indexable inserts Ø40 mm cutting diameter Includes M4x10 Torx clamping screw Stability and precision for consistent results The tool delivers reliable performance through a Ø40 mm cutting diameter and 4 flutes, which together provide a balance between material removal rate and surface finish. A 25 mm shank increases rigidity in the holder, reducing vibration and enhancing repeatability across batches. Compatibility with indexable inserts means insert geometry and grades can be selected to match different steels or aluminium alloys, enabling a predictable cutting process and consistent component quality. Quick insert change and secure clamping reduce downtime Clamping is handled by an M4x10 Torx screw and a T15 key interface, ensuring fast, repeatable insert changes and a positive locating position for every tool change. The secure clamping arrangement minimises micro-movement under load, improving tool life and reducing rework. This practical configuration supports shorter setup times and higher machine uptime, translating into measurable productivity gains on the shop floor. Versatile compatibility that supports workshop efficiency With a 45 mm cutting length and 120 mm overall length, the cutter is suited to a wide range of shoulder and face milling tasks; the 90° cutting angle provides square shoulder capability for accurate step formation and pocket walls. The tool is supplied ready for APKT 1604 inserts and is compatible with Korloy insert grades commonly stocked in industrial workshops. At 0.547 kg, the assembly offers straightforward handling and good balance for stable spindle operation. Together, these attributes make the cutter a practical choice for manufacturers seeking efficient, dependable milling with minimal adjustments. For tailored application recommendations or to secure the Teknik Cutting Tools S264TM for the next production run, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our technical advisors will assist with insert selection and clamping setup Technical data Article number: S264TM Brand: Teknik Makina Fits inserts: APKT 1604 Compatible with: Korloy Facts Shank diameter: 25 mm Cutting diameter: 40 mm Cutting length: 45 mm Overall length: 120 mm Number of cutting edges: 4 Weight: 0.547 kg Clamping screw: M4x10 Torx key size: T15 Cutting angle: 90° Special features Shaft milling cutter design For APKT 1604 indexable inserts Suitable for face and shoulder milling Brand: Teknik Makina FAQ What insert type does the cutter accept? The cutter accepts APKT 1604 indexable inserts; Teknik Cutting Tools designed the tool for this insert format to ensure reliable seating and chip control. Is the tool compatible with Korloy inserts? Yes, the S264TM is compatible with Korloy insert grades, allowing use of commonly available chipbreaker and grade combinations. What are the shank and cutting diameters? The shank diameter is 25 mm and the cutting diameter is 40 mm, providing a stable connection to the tool holder for accurate milling. How is the insert secured on the cutter? Inserts are secured with an M4x10 Torx clamping screw; a T15 Torx key is specified for tightening to the correct torque. Which milling operations is this cutter best suited to? The tool is optimised for face and shoulder milling where a 90° cutting angle and a 45 mm cutting length are required for square shoulders and efficient material removal. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining a robust Ø 40 mm cutting diameter with a four‑flute geometry and a shank Ø 32 mm for stable clamping, this tool delivers reliable material removal and reduced vibration; the 350 mm overall length provides the reach required for deeper setups. Order the shank milling cutter directly via Metav Werkzeuge or ask the consultants for machining recommendations. Shank milling cutter S456TM – Ø 40 mm, 4 flutes by Teknik Makina A shank milling cutter S456TM designed for indexable‑insert milling with APKT 1604 inserts, suited to shoulder and face milling where secure clamping and repeatable insert changes are needed 40 mm cutting diameter Four cutting edges for even material removal Shank Ø 32 mm for stable clamping Compatible with APKT 1604 inserts Reliable indexable‑insert system for predictable productivity The cutter body is engineered to accept APKT 1604 indexable inserts and is compatible with Korloy insert variants, enabling fast insert changes and stocked spare parts strategies. A secure clamping interface using Torx M4x10 screws with a T15 key provides repeatable seating and minimises downtime during tool replacement. This construction supports consistent cutting performance and simplifies maintenance planning for production runs. Stable cutting performance through balanced geometry With a Ø 40 mm cutting diameter and 4 flutes, the tool offers a balanced chip load that is well suited to steady material removal and reduced harmonic excitation. The shank Ø 32 mm ensures firm retention in the spindle or holder, while the 90° cutting angle provides clean shoulder faces and predictable axial forces. The combination of these dimensions reduces the risk of chatter and contributes to improved surface quality on the workpiece. Extended reach while maintaining rigidity An overall length of 350 mm combined with a 55 mm cutting length permits access to recessed features and longer setups without resorting to multiple extensions. Despite the extended reach, the robust tool mass (approx. 2.375 kg) supports rigidity at the cutting zone, helping to keep tolerances tight and tool life consistent. The modular nature of the insert system also means that consumables can be optimised for cost‑efficiency without replacing the entire tool body. Specification guidance and workshop reliability As part of a pragmatic machining strategy, this cutter integrates with common insert inventories and workshop toolholders, reducing the number of special components required. Metav’s experience in precision tools supports selection of the correct insert grade and chipformer for the intended material and cycle time targets. The documented choice of clamping hardware and standard insert format enables straightforward stock management and predictable replenishment. Consult Metav Werkzeuge for a tailored recommendation on Teknik Cutting Tools' S456TM shank milling cutter and for assistance selecting the correct APKT 1604 inserts; call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data SKU: S456TM Brand: Teknik Makina Designation: Shank milling cutter for APKT 1604 indexable inserts Core data Cutting diameter: 40 mm Shank diameter: 32 mm Cutting length: 55 mm Overall length: 350 mm Number of edges: 4 Weight: 2.375 kg Cutting angle: 90° Special features Compatible with APKT 1604 indexable inserts Suitable insert manufacturer: Korloy Clamping screw: M4x10 Torx Torx key size: T15 FAQ Which insert type fits this cutter? The cutter accepts APKT 1604 indexable inserts; Korloy APKT 1604 grades are compatible as specified for the tool body. How is an insert secured in the tool? Inserts are retained with a Torx M4x10 clamping screw tightened with a T15 key to ensure repeatable seating and safe clamping. What machining tasks suit this tool? The geometry and 90° cutting angle make it suitable for shoulder and face milling operations where a Ø 40 mm tool and a four‑flute arrangement provide a balance of material removal and surface finish. Does the tool provide sufficient reach for recessed features? Yes; the 350 mm overall length with a 55 mm cutting length allows access to deeper pockets and extended setups while maintaining rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact combination of high metal-removal capacity and straightforward serviceability: the shank design and indexable insert system reduce downtime while delivering consistent cutting performance. Order the tool directly via Metav Werkzeuge or consult our specialists for application guidance. 40 mm Shank Milling Cutter S670TM — for APKT 1705 indexable inserts (Teknik Makina) 40 mm shank milling cutter S670TM designed for heavy-duty milling with APKT 1705 indexable inserts in industrial metalworking. 40 mm cutting diameter for robust removal Compatible with APKT 1705 indexable inserts 32 mm shank diameter for enhanced rigidity Secure clamping with M4x10 Torx screws Increased throughput with a proven insert system The combination of a 40 mm cutting diameter and 4 cutting edges provides a clear productivity advantage in series milling operations. Fewer passes are needed to remove bulk material, which shortens cycle times and increases throughput on horizontal and vertical milling centres. The use of indexable inserts means inserts are replaced rather than the entire cutter, lowering recurring tooling costs and simplifying inventory management. Fast, reliable insert changes that minimise downtime This shank milling cutter accepts APKT 1705 indexable inserts and uses M4x10 Torx screws with a T15 key, ensuring positive seat engagement and repeatable clamping force. Indexable geometry enables quick rotation or replacement of inserts when an edge is worn, preserving cutting geometry and surface finish without lengthy regrinding procedures. The modular approach supports consistent part quality across production batches. Rigidity and control for stable machining A 32 mm shank diameter combined with a 300 mm overall length keeps the tool suitably rigid for demanding cuts while allowing the reach necessary for many component geometries. The solid construction, reflected in the tool mass of 1.882 kg, helps damp vibration under load and maintain cutting stability. Greater stiffness translates into improved tool life for inserts and more reliable dimensional tolerances on finished components. Workshop-ready design and supply-chain confidence Delivered as SKU S670TM, this tool is produced by Teknik Makina and is compatible with inserts from Taegutec, offering flexibility in consumable sourcing. The cutter’s straightforward mechanical design integrates easily into existing toolholders and clamping systems, and the Torx interface reduces the risk of incorrect fastening. Metav Werkzeuge supports operational continuity with transparent logistics and industrial-grade quality control, helping workshops scale production without compromising precision. Contact Metav Werkzeuge for a tailored recommendation on integrating the S670TM into production or for advice on insert selection — info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: S670TM Manufacturer: Teknik Makina Product type: Shank milling cutter Compatible inserts: APKT 1705 Compatible insert supplier: Taegutec Facts Cutting diameter: 40 mm Overall length: 300 mm Shank diameter: 32 mm Insert pocket depth (shank length cutting): 60 mm Number of cutting edges: 4 Weight: 1.882 kg Torx key: T15 Torx screw: M4x10 Special features Indexable insert system Robust shank for vibration control Designed for industrial metalworking Delivered as precision-machined assembly SKU for ordering and inventory: S670TM FAQ Which inserts fit this milling cutter? The cutter accepts APKT 1705 indexable inserts; supplier-tested compatibility includes inserts from Taegutec for reliable cutting performance. What torque and key are required for the screws? The cutter uses M4x10 Torx screws and requires a T15 key for secure clamping and repeatable seating of inserts. Is the shank suitable for standard toolholders? The 32 mm shank diameter is compatible with clamping systems designed for that diameter; the tool integrates with common holders used in industrial milling. How does the tool support uptime in production? By using indexable inserts and standardised screws, the S670TM allows fast insert changes and predictable replacement cycles, reducing machine downtime and simplifying spare-part logistics. Who manufactures the tool and what is the SKU for ordering? The tool is manufactured by Teknik Makina and supplied as SKU S670TM, which should be quoted when ordering or requesting technical data. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; eMail: info@metav-werkzeuge.com

Benefit from the combination of robust shank dimensions and indexable-insert compatibility to secure stable, repeatable milling results in daily production. Order the tool directly via Metav Werkzeuge or consult the technical team for precise pairing and setup advice. Shank milling cutter for APKT 1003-1604 Indexable Inserts – 40 mm dia, 25 mm shank (Teknik Makina) The Shank milling cutter for APKT 1003-1604 Indexable Inserts is a purpose-built insert milling cutter intended for efficient face and peripheral milling where quick insert changes and consistent cutting geometry are required. 40 mm cutting diameter 25 mm shank diameter Compatible with APKT1604 inserts Four cutting edges for smooth removal Consistent cutting performance for predictable results The tool is designed to deliver a reliable cutting pattern using a 40 mm diameter and 4 cutting edges, which together promote balanced material removal and reduced cutting forces. The 90° cutting geometry yields a defined shoulder finish and helps maintain dimensional accuracy during face milling operations. For users evaluating cycle time, the combination of cutter diameter and edge count supports higher material removal rates while preserving surface quality. The physical balance and mass distribution of the tool contribute to vibration damping, which results in fewer rework cycles and a steadier machining process. Secure clamping and straightforward insert handling Retention and repeatability are supported by a robust fastening arrangement: an M4x10 Torx screw with a T15 Torx key secures the indexable insert, ensuring consistent seat location and torque control. Compatibility with APKT1604 indexable inserts simplifies stock management and allows quick replacement during shift changes. For production environments where tool changeover speed matters, the standardised insert format and straightforward clamping reduce downtime and make insert rotation or replacement a routine, low-risk operation. Optimised geometry for workshop integration With a 25 mm shank, 45 mm cutting length, and 120 mm overall length, the cutter is sized for stability in common toolholders while still providing sufficient reach for many milling tasks. The listed 0.516 kg mass contributes to tool rigidity without imposing excessive spindle load, which is important for maintaining spindle life and consistent spindle dynamic behaviour. The tool’s dimensions are compatible with typical milling setups, supporting integration into existing tool lists where repeatability and simple tool management are priorities. Practical application guidance and production benefits The cutter is suitable for workshop and industrial settings that require dependable insert milling with standard APKT insert geometries. Compatibility with inserts from established manufacturers such as YG-1 helps to reduce logistics complexity and secures replacement availability. Specifying this cutter supports predictable cycle times, simplified tooling inventory and a clear maintenance routine for insert inspection and rotation. If a machining strategy requires assessment, technical consultation can be sought to establish optimal feeds, speeds and insert grades for particular materials and component tolerances. Contact Metav Werkzeuge for tailored advice on selecting the right Teknik Cutting Tools shank milling cutter and the optimal APKT1604 insert pairing to maximise production uptime Technical data Article number: S046TM Manufacturer: Teknik Makina Name: Shank milling cutter Description: for APKT 1003-1604 Indexable Inserts eClass: 21180806 ETIM: EC011860 Numbers Diameter: 40 mm Shank diameter: 25 mm Cutting length: 45 mm Overall length: 120 mm Number of cutting edges: 4 Weight: 0.516 kg Cutting angle: 90° Special features Compatible insert: APKT1604 Compatible insert manufacturer: YG-1 Torx screw: M4x10 Torx key size: T15 For APKT 1003-1604 indexable inserts FAQ What insert type fits this milling cutter? The cutter is designed for APKT1604 indexable inserts and accepts APKT 1003–1604 sizes as specified for secure seating and correct cutting geometry. Which manufacturers’ inserts are compatible? Compatibility is confirmed with YG-1 inserts; the cutter accepts APKT1604 inserts from standard suppliers, facilitating procurement and stocking. What is the shank diameter and why does it matter? Shank diameter is 25 mm; a solid shank of this diameter delivers greater rigidity in the holder, reducing deflection and improving dimensional stability in the machined component. Is the fastening method industry standard? Yes; the insert is secured with an M4x10 Torx screw requiring a T15 key, a common and reliable method that ensures repeatable clamping torque and precise insert location. Can this cutter be used for both face and peripheral milling? The cutter’s 90° cutting angle and multiple cutting edges make it suitable for defined shoulder and face milling operations where repeatable geometry and a consistent surface finish are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from stable, cost-efficient indexable milling thanks to the combination of a 40 mm cutter diameter, a rigid 25 mm shank and compatibility with APMT 1604 inserts; this pairing supports consistent material removal and straightforward insert changes. Order the tool via Metav Werkzeuge or consult their technical team for application-specific guidance. S250TM Indexable milling cutter — 40 mm Ø, for APMT 1604 inserts (Teknik Makina) The S250TM is an indexable milling cutter designed for machining with APMT 1604 indexable inserts, offering a compact overall length and secure Torx fastening for reliable clamping in repetitive milling operations. Indexable cutter for APMT 1604 inserts 40 mm diameter with 4 cutting edges 25 mm shank for secure clamping M4x10 Torx fastening, T15 key High material removal rate with controlled stability The tool’s 40 mm diameter and 4 cutting edges enable efficient metal removal while maintaining process stability. A 90° cutting angle ensures axial engagement that is easy to predict for programming and cycle-time calculation. Because the cutter accepts standard APMT 1604 indexable inserts, insert replacement avoids full-tool regrinding and reduces operating costs; worn edges are exchanged quickly, restoring cutting performance without extended downtime. The balanced geometry supports repeatable passes and helps to keep tolerance scatter low during batch production. Secure clamping and straightforward insert handling With a 25 mm shank and a 45 mm cutting length, the design combines rigidity with sufficient reach for many pocketing and face-milling tasks. The insert seats are secured by an M4x10 Torx screw and require a T15 key, giving a compact, repeatable clamp that resists loosening under typical milling loads. Compatibility with Korloy APMT 1604 inserts simplifies procurement and makes it straightforward to source replacements. The indexable system means edge geometry is preserved and operators can explain insert seating and torque procedures without specialist tooling knowledge. Lower tool cost and lighter tool-change cycles A modest mass of 0.544 kg and a total length of 120 mm reduce toolchanger loads and can help to shorten tool-change times in automated machines. By using indexable inserts rather than solid-carbide cutters, the cutter reduces per-edge cost and shortens maintenance intervals — an economic benefit for medium- to high-volume workshops. The combination of standard insert format and familiar Torx fastening supports predictable servicing and helps maintain uptime, while the cutter’s straightforward geometry allows planners to calculate feeds, speeds and engagement angles with established formulas. For tailored advice on integrating the S250TM into production or to confirm suitability for specific materials, contact Metav Werkzeuge — Metav’s specialists in precision tools will recommend the optimal insert grade and clamping practice and can be reached at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: S250TM Manufacturer: Teknik Makina Name: Indexable milling cutter for APMT 1604 indexable inserts Compatible insert manufacturer: Korloy Torx screw: M4x10, Torx key: T15 Dimensions / core data Diameter: 40 mm Cutting length: 45 mm Overall length: 120 mm Shank diameter: 25 mm Number of cutting edges: 4 Cutting angle: 90° Weight: 0.544 kg Features / special characteristics For APMT 1604 indexable inserts Secured with M4x10 Torx fastening Compatible with Korloy insert range Indexable design for rapid insert changes FAQ What insert size does this cutter accept? The S250TM cutter is designed for APMT 1604 indexable inserts; the seats and clamping torque are matched to that format. Which insert manufacturers are compatible with the S250TM? The cutter is compatible with Korloy APMT 1604 inserts and other inserts produced to the same indexable standard. What shank and overall dimensions are relevant for toolholding? The tool has a 25 mm shank, a 45 mm cutting length and a 120 mm overall length, which should be verified against machine toolholder reach and clearance. What fastener and torque tool are required for insert changes? Insert seats use an M4x10 Torx screw and require a T15 key for secure clamping. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise, cost‑effective indexable milling: the combination of a 32 mm shank for rigidity and a 40 mm cutter diameter for efficient material removal delivers stable machining and reduced vibration; order directly via Metav Werkzeuge or consult the technical team for application advice. S251TM Shaft Milling Cutter by Teknik Makina – 40 mm Diameter · 32 mm Shank (for APMT 1604 Inserts) The S251TM is a shaft milling cutter tailored for versatile face and slot milling using APMT 1604 indexable inserts, suited to industrial and workshop CNC applications. 40 mm cutter diameter for broad material removal 32 mm hardened shank for high rigidity Compatible with APMT 1604 indexable inserts Four cutting edges for balanced machining Reliable performance for high‑productivity milling The S251TM is engineered to deliver consistent results in series production and jobbing shops. With a 32 mm shank and a 40 mm diameter, the tool provides a stable cutting platform that reduces chatter and enables higher material removal rates. The four flutes guarantee even load distribution, which improves surface finish and tool life. Where cycle time and repeatability matter, this cutter contributes to predictable machining results through its rigid design and balanced geometry. Economical indexable system and quick insert changes Designed for APMT 1604 indexable inserts, the cutter offers an economical approach to tool management: insert replacement is faster and less costly than resharpening solid tools. The cutter retains inserts with an M4x10 Torx screw, tightened with a T15 key, ensuring reliable clamping and straightforward maintenance. Less downtime for tooling changes means increased uptime on the machine, and compatibility with Korloy inserts widens sourcing options for supplies and grades. Application scope and machining advantages This milling solution excels in general face milling and light slotting across common industrial alloys when correct cutting data are applied. The 90° cutting angle supports square shoulder operations and efficient side cutting. The tool’s attributes make it particularly suitable for work requiring a balance of material removal and surface quality; hard finishing or heavy roughing should be planned according to insert geometry and machine power to preserve tool life. Practical design for workshop integration Handling and mounting have been considered: the cutter’s 150 mm overall length and 55 mm cutting length allow comfortable reach while maintaining rigidity close to the spindle. At a weight of 1.294 kg, it is straightforward to fit and balance in standard toolholders. The combination of mechanical clamping via the Torx screw and proven insert form factors simplifies inventory and training requirements, supporting efficient production workflows. For tailored advice on integrating the Teknik Makina S251TM into production workflows, contact Metav Werkzeuge for technical guidance and rapid supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: S251TM Manufacturer: Teknik Makina Diameter: 40 mm Shank diameter: 32 mm Cutting length: 55 mm Overall length: 150 mm Cutting edges: 4 Cutting angle: 90° Weight: 1.294 kg Compatible inserts: APMT 1604 Compatible insert manufacturer: Korloy Torx screw: M4x10 Torx key: T15 Design: shaft milling cutter for indexable inserts FAQ Which inserts fit this cutter? The S251TM accepts APMT 1604 indexable inserts; Korloy grades are listed as compatible and common industry grades can be selected for application needs. How is the insert secured? Inserts are fixed with an M4x10 Torx screw, tightened using a T15 key, which provides reliable clamping suitable for standard milling forces. What operations is this cutter best suited to? The tool is designed for face milling and light slotting where a 90° cutting angle and four cutting edges provide balance between productivity and surface quality. What are the key dimensions for toolholder selection? Important dimensions: 32 mm shank diameter, 40 mm cutter diameter, 55 mm cutting length and 150 mm overall length — select a holder compatible with a 32 mm shank. Is the cutter suitable for heavy roughing? Heavy roughing demands consideration of insert grade, machine power and cutting parameters; the S251TM offers rigidity, but optimum performance for heavy cuts requires matching insert geometry and speed/feed settings. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of precision geometry and simple serviceability: the cutter’s Ø 40 mm cutting diameter and shank Ø 25 mm provide stable performance in demanding milling tasks, while compatibility with indexable inserts reduces downtime and tooling costs. Order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Shank milling cutter S172TM – for APXT 1003 indexable inserts, Ø 40 mm, 5 flutes (Teknik Makina) The Shank milling cutter S172TM is a dedicated tool for industrial milling with APXT 1003 indexable inserts, designed for efficient face and shoulder milling where rapid insert changes and consistent chip control are required. Ø 40 mm cutting diameter Shank Ø 25 mm for secure clamping 5 cutting edges for uniform load distribution Stable cutting performance with fewer tool changes The tool’s Ø 40 mm cutting diameter combined with a shank Ø 25 mm gives increased rigidity that reduces vibration and improves surface finish during heavy-light milling cycles. Fitted with APXT 1003 indexable inserts, the system enables quick insert replacement and predictable cutting behaviour, which translates into measurable reductions in setup time and higher process uptime. The geometry supports controlled chip evacuation and steady tool life for repetitive production runs. Secure clamping and straightforward maintenance Clamping is achieved via a Torx fastener system (screw M2.5×5.5), using a Torx T8 key for safe and repeatable tightening. This simple fastening arrangement ensures secure insert retention under load and allows fast intervention during index changes or tool inspection. Compatibility with Korloy inserts and a standardised Torx interface means maintenance routines are short and tooling logistics can be standardised across workshops. Built for production: predictable handling and repeatability With an overall length 120 mm, a cutting length 40 mm and 5 cutting edges, the cutter balances accessibility for deep slots and the stiffness required for shoulder milling; the specified 90° cutting angle is optimised for square shoulder operations. The assembled unit’s weight 0.606 kg contributes to a balanced feel in the spindle while providing sufficient mass to damp minor vibrations. The S172TM integrates into existing toolholder systems without complex adaptations, offering a pragmatic route to higher productivity and consistent component quality. For a tailored assessment of the Teknik Cutting Tools S172TM and to arrange supply directly from Metav Werkzeuge, contact our advisors at Metav Werkzeuge for application-specific recommendations and fast delivery from Emmerich. Technical data Article number: S172TM Manufacturer: Teknik Makina Designation: Shank milling cutter for APXT 1003 indexable inserts Compatible inserts: APXT 1003 Compatible insert manufacturer: Korloy Numbers / Core technical data Shank diameter: 25 mm Cutting diameter: 40 mm Cutting length: 40 mm Number of cutting edges: 5 Overall length: 120 mm Weight: 0.606 kg Cutting angle: 90° Designs / Special features Torx screw: M2.5×5.5 Torx key required: T8 Suitable for indexable inserts APXT 1003 Five-flute geometry for balanced cutting FAQ Which inserts fit this cutter? The cutter is designed for APXT 1003 indexable inserts; it is compatible with APXT 1003 inserts produced by Korloy and similar suppliers. What are the main dimensions of the tool? The S172TM features a cutting diameter of 40 mm, a shank diameter of 25 mm, a cutting length of 40 mm and an overall length of 120 mm. How many cutting edges does the tool have and what is the cutting angle? The tool uses 5 cutting edges and a 90° cutting angle, optimised for shoulder and face milling operations. Which fastening hardware is required for insert retention? Insert retention uses a Torx screw sized M2.5×5.5; a T8 Torx key is specified for tightening and removal. Is the S172TM suitable for heavy production environments? Yes, the S172TM is built with robust geometry and standardised insert fixation to support repetitive industrial milling tasks with predictable tool life and short maintenance intervals. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise indexable cutting and a compact Ø 40 mm body with 18 cutting edges plus a robust 32 mm shank for secure clamping; the design supports fast setup and consistent material removal. Order this solution via Metav Werkzeuge or request application advice from our technical consultants for an optimised integration into production. Hedgehog-style indexable milling cutter HF09TM — Ø 40 mm, 18 flutes, Teknik Makina The Hedgehog-style indexable milling cutter HF09TM is a specialised milling head for efficient peripheral and face milling applications where modular inserts are preferred over solid tools, suitable for industrial CNC and high-repeatability workshop operations. Indexable for APKT 1003 inserts Ø 40 mm cutting diameter 18 cutting edges for smooth stock removal 32 mm shank for secure clamping High productivity through modular design and repeatable results The modular head is engineered to combine the flexibility of indexable inserts with the stability of a solid tool body. Its geometry, featuring 18 cutting edges, delivers continuous chip engagement that reduces cycle interruptions and supports steady material removal rates. The Ø 40 mm working diameter and cutting height 55 mm provide a compact footprint while maintaining effective cutting area, making the tool suitable for series production and smaller batch runs that demand repeatability and short setup intervals. Where changeover times are critical, the insert system minimises downtime and permits on-the-fly tool maintenance. Compatibility and quick changeover for efficient workflows Compatibility with APKT 1003 inserts and acceptance of Korloy-produced plates ensures broad availability of grades and chipbreakers for adapting to different workpiece materials. The 32 mm shank enables secure clamping in common toolholders, limiting runout and improving finish quality. Fast and reliable fixing is supported by the specified fastening hardware (Torx M2.5x5.5, key T08), which streamlines reassembly and reduces the time required for routine servicing. These characteristics are aimed at shops that value straightforward logistics and the ability to swap cutting grades quickly. Cutting performance and application guidance The tool’s multiple-edge configuration is designed to spread cutting forces and heat across several teeth, which can lead to improved surface quality during light to medium depth cuts. The combination of cutter diameter, number of flutes and cutting height 55 mm is particularly well suited to operations where a balance between material removal rate and surface finish is required. For unfamiliar users, selecting insert grade and cutting data according to the workpiece material is the best practice; the modular concept permits optimisation without replacing the whole tool body. Durability, handling and maintenance The body’s dimensions and mass (0.873 kg) strike a balance between rigidity and manageability when fitting or removing the head. Regular inspection of insert seats and correct torqueing of the Torx screw reduces the risk of runout or insert movement. Replacement inserts are indexed quickly and repeatability is maintained when securing inserts with the specified M2.5x5.5 fastening screws and T08 key. Routine checks of clamping surfaces and light cleaning after each shift prolong service life and support consistent machining outcomes. Where the cutter delivers most value The head is intended for production environments and specialist workshops that prefer the cost and logistical advantages of indexable systems. Its combination of a compact Ø 40 mm tool body, multiple cutting edges and a robust 32 mm shank makes it a good match for jobs requiring repeatable results and straightforward tool maintenance. The modular approach reduces inventory complexity while enabling tailored cutting strategies through the choice of APKT 1003 insert grades. Contact Metav Werkzeuge for a specification check and to secure the HF09TM hedge‑style indexable milling cutter for tailored machining tasks Technical Data Article number: HF09TM Manufacturer: Teknik Makina Product name: Hedgehog-style indexable milling cutter HF09TM Facts Diameter: 40 mm Shank diameter: 32 mm Cutting height: 55 mm Overall length: 125 mm Number of cutting edges: 18 Weight: 0.873 kg Special features Compatible inserts: APKT 1003 Compatible insert manufacturer: Korloy Fastening screw: M2.5x5.5 (Torx) Required key size: T08 Indexable design for reduced downtime FAQ What workpiece materials are suitable for this cutter? The HF09TM hedge‑style indexable milling cutter accepts APKT 1003 inserts and can be adapted to a wide range of materials by selecting the appropriate Korloy insert grade; machining strategy should follow the chosen insert specification. How is the cutter secured in the spindle? The tool body uses a 32 mm shank for clamping; correct holder selection and proper clamping are essential to maintain repeatability when using the HF09TM from Teknik Makina. Which inserts are recommended for finishing applications? For finishing, fine‑grain or polished‑surface APKT 1003 inserts from Korloy are suitable; the HF09TM design allows quick replacement to optimise surface quality without changing the body. What maintenance routines extend tool life? Routine inspection of insert seats, correct torque on the M2.5x5.5 Torx screws and light cleaning after use will keep the HF09TM performing reliably. Is the tool balanced for high‑speed milling? The modular design supports stable running when correctly clamped; balancing should be checked in high‑speed applications and adjusted according to the machine tool manufacturer’s guidance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, indexable milling solution that pairs compatibility with RDMT 12T3 inserts and a 32 mm shank for secure clamping — the result is reliable chip removal and repeatable tool life. Order the tool directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. Shank cutter R242TM — indexable milling cutter, Ø 40 mm, 3 cutting edges (Teknik Makina) A robust shank milling cutter designed for high-production jobs, the Shank cutter R242TM is suited for installations using RDMT 12T3 indexable inserts and engineered for stable, repeatable machining. Ø 40 mm cutting diameter Compatible with RDMT 12T3 inserts 32 mm shank diameter for secure clamping 45 mm effective cutting length Productive indexable milling that reduces cycle time The R242TM delivers a balanced combination of diameter and cutting geometry that supports efficient material removal with the flexibility of indexable inserts. With a Ø 40 mm cutter body and three cutting edges, this design reduces downtime for edge changes and keeps spindle loads predictable. The use of RDMT-style inserts means tooling costs are controlled through repeatable insert life and straightforward reconditioning, which supports leaner production cycles and a better cost-per-part ratio. Stable clamping and straightforward maintenance for consistent accuracy A 32 mm shank provides increased rigidity and improved run-out stability in most machine tool holders, while the 45 mm cutting length offers a practical balance between reach and structural support. The cutter’s fastening hardware — a locking screw M3,5, a Torx screw M3,5x8,5 and a T15 key — ensures fast, secure insert mounting and simplifies service routines. At approximately 0.956 kg, the tool is sufficiently robust for industrial use while remaining easy to handle during tool changeovers. Flexible application through indexable insert technology Designed specifically for use with RDMT 12T3 indexable inserts, the R242TM allows quick adaptation to different cut conditions simply by choosing the appropriate insert grade and geometry. This flexibility turns the cutter head into a modular solution for a range of machining tasks where insert-based strategies are preferred, enabling selective investments in carbide grades and coatings without replacing the entire tool body. The result is a future-proof approach to process planning and inventory optimisation. Supply reliability and workshop partnership with Metav Sourcing the cutter via Metav Werkzeuge connects the product capabilities with a service model focused on reliable European supply and technical guidance. Metav’s stock and quality procedures act as a practical “quality filter” for workshop buyers, reducing uncertainty about tool origin and batch consistency. As a companion to the tool itself, this service layer supports operational planning and ensures access to the required spare parts and consumables in continuing production runs. For a practical discussion on integrating the R242TM into existing tool setups, contact Metav Werkzeuge to arrange procurement or application advice directly from Emmerich — email info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data SKU: R242TM Manufacturer: Teknik Makina Compatible inserts: RDMT 12T3 eClass: 21180806 ETIM: EC011860 Data Cutting diameter: 40 mm Shank diameter: 32 mm Cutting edges: 3 Effective cutting length: 45 mm Overall length: 150 mm Weight: 0.956 kg Special features Locking screw: M3,5 Torx screw: M3,5x8,5 Torx key: T15 Designed for indexable inserts Files available in product migration data FAQ Which inserts are compatible with this cutter? The cutter is compatible with RDMT 12T3 indexable inserts; selecting the appropriate insert grade will tailor the R242TM’s performance to the machining task. What shank size is required for safe clamping? A 32 mm holder or collet is recommended to achieve the rigidity intended for this tool and to maintain consistent run-out during operations. How many cutting edges does the tool use and what is the benefit? The tool employs three cutting edges, which provides a compromise between feed rate potential and chip load distribution, supporting steady removal rates with reduced vibration. Is the cutter suitable for heavy-duty milling applications? The robust shank and indexable design of the R242TM make it suitable for many production scenarios where insert-based machining is standard; insert selection and machine stability determine final capacity. What fastening components are supplied with the tool? The tool uses a locking screw (M3,5) and Torx screw (M3,5x8,5) secured with a T15 key to mount inserts securely and facilitate quick changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine productivity with simple maintenance: an indexable milling cutter offering fast insert changes and stable clamping for consistent material removal. Order directly via Metav Werkzeuge or consult the specialists for application advice. S844TM – Indexable shank milling cutter, Ø 40 mm, 4‑flute by Teknik Makina The S844TM is a shank-mounted indexable cutter designed for milling operations using XNKT 0805 indexable inserts, suitable for use on machining centres and milling heads. Compatible with XNKT 0805 indexable inserts Ø 40 mm cutter diameter for medium‑duty milling 4 flutes for balanced chip evacuation Shank Ø 32 mm for secure clamping Efficient material removal with economical inserts The tool is engineered as an indexable cutter to combine high material removal rates with straightforward maintenance. With a Ø 40 mm cutting diameter and 4 flutes, the geometry promotes steady cutting forces and improved surface finish under stable machining conditions. The use of indexable inserts means only the insert needs replacing once worn, which reduces downtime and lowers long‑term operating costs compared with solid‑carbide alternatives. For production environments where tool change frequency affects throughput, this modular approach supports predictable process planning and easier tool management. Robust clamping and secure fastening for reliable use A shank Ø 32 mm provides a rigid connection between tool and spindle, helping to reduce vibration and extend insert life. The cutter is secured with a Torx M4x10 screw, tightened with a T15 Torx key, ensuring repeatable seating of the insert and consistent cutting performance. The system’s mechanical simplicity aids maintenance routines: insert indexation and screw torque are the primary service actions, allowing technicians to restore cutting capacity quickly and with minimal specialist equipment. Compatibility with Korloy insert geometries also ensures a broad supply of replacement inserts. Practical advantages for the workshop and production floor This indexable design supports flexible application planning: inserts can be selected for specific workpiece materials or surface requirements without changing the whole cutter. The overall length 130 mm and balanced flute count allow installation in standard toolholders while maintaining a compact envelope for many milling set‑ups. For buyers seeking to streamline tooling inventories, the combination of a common insert format and a standard shank diameter reduces the number of distinct tool types required across jobs, simplifying stocking and ordering processes. For milling tasks that demand both serviceability and stability, request Teknik Makina’s S844TM from Metav Werkzeuge — contact Metav Werkzeuge in Emmerich for detailed technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number / SKU: S844TM Manufacturer: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Facts Diameter: 40 mm Overall length: 130 mm Shank/clamping diameter: 32 mm Cutting edges / flutes: 4 Torx screw: M4x10 Torx key size: T15 Special features Compatible with XNKT 0805 indexable inserts Compatible insert supplier: Korloy Indexable, shank-mounted milling cutter Suitable for use on machining centres and milling heads FAQ Which inserts fit this cutter? The cutter accepts XNKT 0805 indexable inserts; Korloy‑compatible geometries are supported for straightforward replacement. What is the correct fastening specification for insert change? Insert retention uses a Torx M4x10 screw tightened with a T15 Torx key to ensure secure and repeatable clamping. What shank size is required in the toolholder? The tool requires a toolholder with a 32 mm clamping diameter to achieve the intended rigidity and balance. How many cutting edges does the cutter provide and what is the benefit? The cutter features 4 flutes, offering balanced cutting forces and improved chip evacuation for consistent surface quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid clamping solution combined with precise 95° cut geometry and compatibility with CN--1906 indexable inserts for dependable turning performance; order the holder via Metav Werkzeuge or request application advice from the technical team. Klemmhalter D307-2TM — DCLN toolholder for CN-- indexable inserts, left-hand, 95° The Klemmhalter D307-2TM is a left-hand DCLN toolholder engineered for metalturning applications with CN--1906 indexable inserts and a robust 95° cutting geometry. Left-hand orientation for turning tasks Compatible with CN--1906 inserts Robust 40 mm head and shank dimensions 95° cutting angle for stable cuts Stable clamping for consistent turning results A rigid clamping arrangement is central to repeatable machining, and this toolholder provides a stable interface between machine and insert. With a head and shank width of 40 mm and a cutting height of 40 mm, the design reduces vibration and supports steady chip formation; the mass of 3.195 kg contributes to dampening during heavy cuts. Reduced chatter improves surface finish and extends the life of both the insert and the holder, so cycle times remain predictable and tool-change intervals become easier to plan. The solid geometry is particularly beneficial where dimensional consistency across batches is required. Precision compatibility that simplifies tooling choices Designed for DCLN-style holders and to accept CN--1906 indexable inserts, the product—identified under DCLNL 4040—matches common industry insert grades and shapes. The 95° cutting angle is optimised for conventional turning operations, offering a balance between approach angle and clearance that helps maintain stable cutting forces. The left-hand orientation suits applications where the tool must cut counter to right-hand holders; this is indicated as left-hand in the specification and should be selected where the process or machine setup demands it. The shank designation S19 clarifies the holder interface for fixture planning and compatibility checks. Practical dimensions and workshop integration With an overall length of 250 mm, the holder fits standard turret and toolpost arrangements while keeping the centre of cutting action accessible for inspection and measurement. The consistent 40 mm shank and head dimensions simplify fixture planning and stock management, as like-for-like holders reduce the variety of spares required. The compatibility with established indexable inserts means inserts can be stocked across multiple holders, lowering logistical overhead. Clear, measurable specifications support rapid selection in engineering documentation and facilitate process validation in production environments. Contact Metav Werkzeuge for application guidance and to source the Teknik Cutting Tools DCLNL 4040 toolholder (SKU D307-2TM); email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: D307-2TM Manufacturer: Teknik Makina ISO designation: DCLNL 4040 Core data Overall length: 250 mm Head height: 40 mm Head width: 40 mm Shank width: 40 mm Cutting height: 40 mm Weight: 3.195 kg Cutting angle: 95° Direction: left Special features Compatible inserts: CN--1906 Insert family: DCLN for CN-- indexable inserts Shank designation: S19 SKU: D307-2TM FAQ What insert type fits this holder? The holder accepts CN--1906 indexable inserts; the designation DCLN indicates compatibility with this insert family for standard turning tasks. Is the holder suitable for right-hand turning? The D307-2TM is specified as left-hand; for right-hand operations a mirror-design holder should be chosen. What does the 95° cutting angle mean for machining? A 95° cutting angle provides a robust approach angle that balances cutting force direction and insert clearance, which supports stable chip control and consistent surface finish. How do the holder dimensions affect turret setup? Consistent 40 mm head and shank widths simplify turret planning and reduce the need for multiple adapter sizes, aiding quicker setup and repeatable positioning. Can this holder be used across different insert grades? Compatibility is with the CN--1906 form; different grades (coatings or substrate) of the same insert geometry can be used for varied materials or cutting conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of rigidity, insert compatibility and deep-reach length for efficient material removal and consistent process stability; order the S32T SD-CR boring bar directly via Metav Werkzeuge or ask our consultants if needed S32T SD-CR — Boring bar with 32 mm shank for DC-- 11T3 indexable inserts (Teknik Cutting Tools) A robust S32T SD-CR boring bar designed for right-hand turning operations with DC-- 11T3 indexable inserts, engineered to deliver stable engagement and precise chip control Solid 32 mm shank for high rigidity Designed for DC-- 11T3 indexable inserts 62.5° cutting angle for stable engagement 300 mm overall length for deep reach Boosted machining stability for reliable cycle times The heavy-duty boring bar provides enhanced rigidity through its 32 mm shank and 40 mm body diameter, reducing vibration and cutting noise during interrupted or heavy cuts. This inherent stiffness translates into more consistent surface finishes and longer tool life when compared with less robust holders. By combining a substantial shank with a 62.5° cutting angle, the tool promotes predictable chip formation and reduced tool deflection, supporting stable cycle times in repetitive production environments. Seamless integration with indexable tooling systems Compatibility with DC-- 11T3 indexable inserts means fast insert changes and straightforward tool set-up on the shop floor. The bar’s ISO designation S32T SD-CR and clear interface to the insert family allow easy matching with existing insert stocks and toolholders. For operations where tooling changeover time is critical, this interchangeability reduces downtime and supports leaner tooling logistics while keeping process control predictable and measurable. Designed for demanding reach and secure clamping With an overall length of 300 mm and a cutting height of 55 mm, the boring bar provides the reach required for deep internal and external turning tasks without compromising clamping security. The right-hand cutting orientation and the solid construction minimise the risk of chatter when working at length, helping to preserve insert edges and ensuring repeatable bore diameters. The bar’s mass and geometry are engineered to balance reach with reliability for routine industrial use. Practical benefits for workshop planning and maintenance The weight of 1.865 kg and standardised interface simplify handling and storage planning in production. Maintenance routines benefit from the use of indexable inserts—worn cutting edges are replaced rather than resharpened—reducing in-house tool repair time and keeping machine utilisation high. For operations seeking measurable improvements in uptime and consistency, the combination of rigidity, quick insert replacement and standard dimensions supports operational efficiency and clearer cost-per-part calculations. For tailored application advice, delivery options from Metav Werkzeuge in Emmerich, or to discuss insertion and clamping suitability for specific workpieces, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: K178TM Brand: Teknik Makina ISO designation: S32T SD-CR Compatible inserts: DC-- 11T3 Core figures Shank diameter: 32 mm Cutting height: 55 mm Overall length: 300 mm Weight: 1.865 kg Cutting angle: 62.5° Body diameter: 40 mm Special features For indexable inserts SD-CR for DC-- series Right-hand cutting direction Indexable-insert interface for rapid changeover FAQ What inserts fit this boring bar? The S32T SD-CR boring bar accepts DC-- 11T3 indexable inserts; the design facilitates quick insert changes and consistent seating. Is the bar suitable for deep internal bores? Yes, the 300 mm overall length and rigid 32 mm shank make the boring bar appropriate for deep-reach internal turning where stability is required. Which direction of cut is supported? The tool is configured for right-hand cutting direction, optimised for standard right-hand turning operations. How does the cutting angle affect performance? The 62.5° cutting angle promotes stable engagement and controlled chip flow, which helps to reduce vibration and improve surface finish during heavy or interrupted cuts. Can the bar be used with existing indexable insert stocks? Compatibility with the DC-- 11T3 family ensures that the bar integrates with common indexable insert stocks provided the insert geometry and clamping meet the DC-- specification. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a robust combination of precise holemaking and simple maintenance: the durable S32T DDQNR drilling bar delivers consistent cutting with replaceable indexable inserts while its Ø40 mm body and 300 mm overall length ensure stable operation in production environments. Order the drilling bar directly via Metav Werkzeuge or ask our consultants if needed. S32T DDQNR – Drilling bar, right-hand, Ø40 mm, 300 mm (Teknik Makina) The S32T DDQNR is a right-hand drilling bar for indexable inserts (DDQN for DN-- Indexable Inserts), designed for workshop and production use where reliable, repeatable holemaking with minimal downtime is required. Right-hand cutting direction Compatible with DN-- 1506 inserts Ø40 mm cutting diameter 300 mm overall length Stable holemaking through larger body and secure shank A thicker body increases rigidity: the Ø40 mm cutting diameter combined with a shank Ø32 mm promotes reduced vibration and improved hole geometry when compared with slimmer holders. This translates to steadier cuts and fewer rejected parts in serial production. The tool’s cutting angle 107.5° and cutting height 60 mm are specified to aid chip flow and reliable seating of the indexable inserts, so the machining process remains predictable and efficient. Understanding these dimensions helps workshop planners match the holder to the appropriate machine spindle and clamping system. Fast insert changes and lower downtime for higher throughput Designed for indexable technology, the holder accepts DN-- 1506 inserts, allowing quick replacement without regrinding. Using replaceable cutting tips reduces tooling inventory complexity and shortens machine downtime, which benefits batch production and mixed-job shops alike. The nominal weight 1.805 kg balances handling convenience with the mass required for stable cutting. For departments seeking measurable efficiency gains, this configuration supports consistent cycle times and simpler maintenance routines. Integration into workshop workflows and suitable applications The drilling bar is intended for right-hand operations and is suited to drilling or enlarging tasks where indexable insert solutions are preferred. It fits typical setups for industrial toolrooms and manufacturing cells that rely on modular tooling systems. Technical staff unfamiliar with insert tooling will find the concept straightforward: the holder secures the tip, the tip does the cutting, and replacement is a matter of minutes rather than hours. For specification questions or compatibility checks, Metav’s technical team can be consulted at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to ensure correct integration into existing toolsets. For workshop-ready drilling performance from Teknik Makina, contact Metav Werkzeuge for specification support and reliable supply from our Emmerich quality hub. Technical data Article number: K477TM Manufacturer: Teknik Makina Facts Shank diameter: 32 mm Cutting height: 60 mm Weight: 1.805 kg Cutting angle: 107.5° Cutting diameter: 40 mm Overall length: 300 mm Special features Compatible with DN-- 1506 inserts ISO designation: S32T DDQNR Right-hand cutting direction Designation: DDQN for DN-- Indexable Inserts Brand: Teknik Makina FAQ What inserts fit this drilling bar? The drilling bar accepts DN-- 1506 indexable inserts; the holder is specified for DDQN-type inserts and is designed for straightforward insert replacement. Is the S32T DDQNR suitable for heavy-duty production? Yes, the S32T DDQNR drilling bar (Teknik Makina, SKU K477TM) features a robust Ø40 mm body and 32 mm shank to support stable cuts suitable for many production environments. Which cutting direction does this tool use? The holder is manufactured for a right-hand cutting direction and should be used accordingly to match the machine’s rotation and feed. How long is the drilling bar and how does that affect handling? With a 300 mm overall length, the bar provides reach for deeper operations while maintaining manageable handling and adequate rigidity for repeatable holemaking. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a stiff, right‑hand turning solution that accepts standard TNMG inserts and delivers repeatable results on production lathes; with a shank Ø32 mm and overall length 300 mm, the tool balances accessibility and rigidity for medium turning tasks. Order details and application advice are available via Metav Werkzeuge if further clarification is required. Boring bar S32T MTUNR (MTUN for TNMG indexable inserts) — Teknik Makina, Ø40 × 300 mm The Boring bar S32T MTUNR is a right‑hand turning tool designed to use TNMG 1604 indexable inserts, intended for general workshop and light production turning applications. Right-hand turning configuration For TNMG 1604 indexable inserts Shank Ø 32 mm, overall length 300 mm Robust construction, weight 1.835 kg Consistent right‑hand cutting for predictable cycles The right‑hand geometry and dedicated insert pocket make the tool a practical choice where cycle stability matters. By accepting TNMG 1604 indexable inserts, the bar enables quick insert changes and consistent contact geometry; this reduces downtime compared with brazed or solid tools and supports repeatable surface quality. The ISO designation S32T MTUNR reflects the standardised shank and pocket arrangement, which simplifies toolholder selection and replacement planning. Shank and length tuned for stiffness and access With a shank Ø32 mm and an overall length 300 mm, the design targets a balance between rigidity and reach. The Ø40 mm body and cutting height 60 mm contribute to reduced deflection when clamped in standard tool posts, improving dimensional accuracy over extended cuts. The mass of the assembly (approx. 1.835 kg) also helps damp vibration in interrupted cuts, translating into improved tool life for inserts and steadier cycle times on batch production runs. Productivity gains from indexable‑insert tooling The bar’s seating for TNMG inserts and the 93° cutting angle deliver controlled chip flow and predictable cutting forces. Using indexable inserts minimises secondary operations for regrinding and enables rapid changeover, which supports a favourable cost‑per‑part calculation in small to medium series. The configuration is particularly suitable where toolholders must be swapped quickly to maintain machine throughput while retaining geometrical accuracy. Procurement advantages and workshop fit Sourced under the Teknik Makina designation and supplied as a standard ISO shank variant, this turning bar integrates into established tooling systems with minimal retooling. Metav Werkzeuge’s distribution ensures access to spare inserts and complementary holders from stock, underlining the practical advantage of centralised procurement. The product supports a steady production flow by combining indexable inserts convenience with a robust shank geometry for everyday machining tasks. Discuss application requirements with Metav Werkzeuge and request availability for the Teknik Makina S32T MTUNR boring bar via info@metav-werkzeuge.com or by calling +49 2822 7131930 Technical Data Article number: K444TM Manufacturer: Teknik Makina ISO designation: S32T MTUNR Facts Shank diameter: 32 mm Overall length: 300 mm Body diameter: 40 mm Cutting height: 60 mm Cutting angle: 93° Weight: 1.835 kg Special features Right-hand cutting direction For TNMG 1604 indexable inserts Designation in English: MTUN for TNMG indexable inserts Suitable for standard toolpost clamping FAQ Which inserts fit the bar? The bar accepts TNMG 1604 indexable inserts; the S32T MTUNR configuration is designed to locate and secure those inserts reliably. What are the key dimensions to check for toolholder compatibility? Check the shank Ø32 mm, the overall length 300 mm and the toolpost capacity; these determine clamping fit and overhang for the Teknik Makina S32T MTUNR (SKU K444TM). Is the cutting direction right‑hand or left‑hand? This turning bar is configured for right‑hand cutting and is optimised for conventional right‑hand turning operations. How does the 93° cutting angle affect machining? The 93° cutting angle gives controlled chip formation and stable cutting forces, aiding surface finish and repeatability when used with the recommended TNMG inserts. Are inserts and clamping screws included? The product is specified to accept TNMG 1604 inserts; check the product listing for scope of delivery and whether inserts or fixing screws are supplied with the S32T MTUNR. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Highlights Eckmesserkopf passend für ADMT 1606 Wendeplatten des Herstellers Walter Schnittwinkel 90° Durchmesser: 40mm 40mm Eckmesserkopf von Teknik Makina für alle ISO Schneidplatten ADMT 1606. Neben den Standard ISO Wendeschneidplatten ist das Werkzeug geeignet für Walter Schneidplatten ADMT 1606. Alle Wendeplatten von Walter können Sie auch bei uns direkt beziehen. Einfach per Mail anfragen, oder rufen Sie uns an. Passende Schneidplatten gibt es hier zu entdecken. Eckmesserköpfe sind ideal zur Verbesserung Ihrer Schneidleistung bei optimaler Zerspanung, selbst auf kleineren Maschinen. Sie eignen sich für zwei Anwendungen. Zum einen sind sie hervorragend für das Fräsen von Flächen nutzbar. Zum anderen kann der Eckmesserkopf auch für das Formfräsen genutzt werden. Dank der exakten Verarbeitung ist ein perfekter Sitz der Platte gewährleistet, sodass ein Verrutschen unmöglich ist. Die Wendeplatten sind fest mit dem Eckmesserkopf verschraubt. Die Schrauben lassen sich mühelos entfernen. Dadurch ist ein schneller Austausch der Schneidplatten möglich, um den Bearbeitungsprozess rasch fortzusetzen. Der Schnittwinkel von 90° sorgt dafür das Sie präzise Oberflächen herstellen können. Beim Eckfräsen werden simultan zwei Flächen bearbeitet. Dieser Zerspanprozess kombiniert Umfangs- und Planfräsen. Eine der wesentlichen Anforderungen ist die Herstellung einer Schulter mit einem echten 90°-Winkel. Herkömmliche Eckfräser sowie Schaft-, Walzenstirn- und Scheibenfräser können für diesen Prozess verwendet werden. Hier finden Sie den kompletten Katalog von Teknik Makina als PDF zum Download. Produktdetails: Bezeichnung: Eckmesserkopf Hersteller: Teknik Makina Bestellnummer: T351TM passend für ADMT 1606 Wendeplatten von Walter Durchmesser: 40mm Schnittwinkel 90° Gesamtlänge: 45mm Durchmesser Aufnahme: 16mm Schneiden: 4 Stück Artikelgewicht: 0,258kg Bestellen Sie jetzt Eckmesserkopf für ADMT 1606 Wendeschneidplatten. Das ist der Hersteller in einigen Worten: Teknik Makina, 1987 in der Türkei gegründet, nahm 1994 die Produktion von Schneidwerkzeugen auf. Im Jahr 2015 zog die Produktion in ein neues Werk im vierten Industriegebiet von Konya um, wo jetzt über 5.000 verschiedene Werkzeuge hergestellt werden. Mit 40 Produktionslinien, die in mehreren Kategorien gleichzeitig arbeiten können, ist das Unternehmen breit aufgestellt. Die Teams in Produktion und Design sind erstklassig ausgebildet und ISO 9001:2015 zertifiziert, um eine sichere und zuverlässige Prozessabwicklung zu garantieren. Angaben zur Produktsicherheit für das Werkzeug 40mm Eckmesserkopf für ADMT 1606 Schneidplatten mit der Artikelbezeichnung .T351TM Hersteller Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Verantwortliche Person Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com

Highlights Eckmesserkopf passend für ADMT 1606 Wendeplatten des Herstellers Walter Schnittwinkel 90° Durchmesser: 40mm 40mm Eckmesserkopf von Teknik Makina für alle ISO Schneidplatten ADMT 1606. Neben den Standard ISO Wendeschneidplatten ist das Werkzeug geeignet für Walter Schneidplatten ADMT 1606. Alle Wendeplatten von Walter können Sie auch bei uns direkt beziehen. Einfach per Mail anfragen, oder rufen Sie uns an. Passende Schneidplatten gibt es hier zu entdecken. Eckmesserköpfe sind ideal zur Verbesserung Ihrer Schneidleistung bei optimaler Zerspanung, selbst auf kleineren Maschinen. Sie eignen sich für zwei Anwendungen. Zum einen sind sie hervorragend für das Fräsen von Flächen nutzbar. Zum anderen kann der Eckmesserkopf auch für das Formfräsen genutzt werden. Dank der exakten Verarbeitung ist ein perfekter Sitz der Platte gewährleistet, sodass ein Verrutschen unmöglich ist. Die Wendeplatten sind fest mit dem Eckmesserkopf verschraubt. Die Schrauben lassen sich mühelos entfernen. Dadurch ist ein schneller Austausch der Schneidplatten möglich, um den Bearbeitungsprozess rasch fortzusetzen. Der Schnittwinkel von 90° sorgt dafür das Sie präzise Oberflächen herstellen können. Beim Eckfräsen werden simultan zwei Flächen bearbeitet. Dieser Zerspanprozess kombiniert Umfangs- und Planfräsen. Eine der wesentlichen Anforderungen ist die Herstellung einer Schulter mit einem echten 90°-Winkel. Herkömmliche Eckfräser sowie Schaft-, Walzenstirn- und Scheibenfräser können für diesen Prozess verwendet werden. Hier finden Sie den kompletten Katalog von Teknik Makina als PDF zum Download. Produktdetails: Bezeichnung: Eckmesserkopf Hersteller: Teknik Makina Bestellnummer: T351TM passend für ADMT 1606 Wendeplatten von Walter Durchmesser: 40mm Schnittwinkel 90° Gesamtlänge: 45mm Durchmesser Aufnahme: 16mm Schneiden: 4 Stück Artikelgewicht: 0,258kg Bestellen Sie jetzt Eckmesserkopf für ADMT 1606 Wendeschneidplatten. Das ist der Hersteller in einigen Worten: Teknik Makina, 1987 in der Türkei gegründet, nahm 1994 die Produktion von Schneidwerkzeugen auf. Im Jahr 2015 zog die Produktion in ein neues Werk im vierten Industriegebiet von Konya um, wo jetzt über 5.000 verschiedene Werkzeuge hergestellt werden. Mit 40 Produktionslinien, die in mehreren Kategorien gleichzeitig arbeiten können, ist das Unternehmen breit aufgestellt. Die Teams in Produktion und Design sind erstklassig ausgebildet und ISO 9001:2015 zertifiziert, um eine sichere und zuverlässige Prozessabwicklung zu garantieren. Angaben zur Produktsicherheit für das Werkzeug 40mm Eckmesserkopf für ADMT 1606 Schneidplatten mit der Artikelbezeichnung .T351TM Hersteller Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Verantwortliche Person Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com

Take advantage of a robust cutter body that combines stable shank support and internal coolant for consistent milling results; the clear compatibility with ADKT 1706 indexable inserts and Korloy supply ensures quick tool changes and predictable performance — order directly via Metav Werkzeuge or consult our specialists for tailored advice. Shank milling cutter for ADKT 1706 indexable inserts (40 mm) by Teknik Makina Shank milling cutter for ADKT 1706 indexable inserts designed for secure, repeatable face and shoulder milling in industrial workshops 40 mm diameter cutter body Internal coolant for improved chip evacuation Compatible with ADKT 1706 Korloy inserts 32 mm shank, 130 mm overall length Engineered for dependable, high-precision milling The Shank milling cutter S067TM is a purpose-built cutter body that brings dimensional stability and predictable cutting performance to repetitive milling tasks. With a 40 mm diameter and a 32 mm shank, the tool offers a rigid connection to the holder, reducing vibration and improving surface finish when compared with less rigid assemblies. The cutter accepts ADKT 1706 indexable inserts (compatible with Korloy), so insert changes are fast and tool life management becomes a simple maintenance routine. Three cutting edges distribute load and allow balanced chip removal during shoulder and face operations. Coolant-fed design that reduces downtime and improves edge life Built with internal coolant, the cutter directs fluid to the cutting zone to optimise cooling and chip evacuation. This targeted flushing helps to keep insert temperature lower and chips clear of the cutting edge, which contributes to longer service intervals and steadier surface quality. The head secures inserts with an M4x10 Torx screw that is tightened with a T15 key, simplifying routine exchange and minimising unproductive machine time. Clear mechanical fastening and coolant support together reduce the likelihood of unexpected tool-change events, supporting continuous production runs. Practical dimensions and workshop integration for easy setup With a 130 mm overall length, 50 mm cutting length and a tool weight of 0.75 kg, the cutter body balances reach and rigidity for common milling set-ups. Its 32 mm shank fits standard toolholders for this class of cutter, allowing straightforward integration into existing tool inventories. Marked as S067TM, the component is supplied ready for insert mounting and immediate use once the correct insert geometry is fitted. Spare parts such as the Torx key and M4x10 screws are standard items in most maintenance trolleys, so assembly and upkeep remain efficient and predictable. For reliable milling components from Teknik Makina and support directly from Metav Werkzeuge, contact our technical team for procurement and application guidance at info@metav-werkzeuge.com or +49 2822 7131930 — Metav ensures dependable supply from Emmerich with industry-grade quality controls Technical data SKU: S067TM Manufacturer: Teknik Makina Product type: Shank milling cutter Dimensions & weight Diameter: 40 mm Overall length: 130 mm Shank diameter: 32 mm Cutting length: 50 mm Number of cutting edges: 3 Weight: 0.75 kg Compatibility & features Indexable inserts: ADKT 1706 Compatible insert manufacturer: Korloy Internal coolant: yes Torx key: T15 Torx screw: M4x10 FAQ Can ADKT 1706 inserts be used with this cutter? Yes. The shank milling cutter accepts ADKT 1706 indexable inserts and is listed as compatible with Korloy insert variants for straightforward replacement. Does the tool support coolant-through operation? Yes. The cutter body features internal coolant to direct fluid to the cutting zone, improving chip evacuation and insert life. What shank size and holder are required? The cutter has a 32 mm shank and is intended for holders that accept a 32 mm diameter shank; the overall length is 130 mm for setup planning. How are inserts fixed and replaced? Inserts are secured with an M4x10 Torx screw and require a T15 key for removal and fitting, ensuring quick and reliable exchange. What is the product reference for ordering spare parts? The unit is stocked as S067TM; use this SKU when enquiring about the cutter body or matching Torx screws and replacement components. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust 40 mm cutting diameter, secure Torx M4x10 clamping and compatibility with APKT 1604 indexable inserts to increase uptime and machining consistency; order directly via Metav Werkzeuge or consult our specialists for application advice. Shaft milling cutter S283TM — insert milling cutter body for APKT 1604 indexable inserts (Teknik Makina) The Shaft milling cutter S283TM is a precision-engineered milling body for indexable APKT 1604 inserts, designed to deliver stable cutting performance and quick insert changes in demanding production and workshop environments Compatible with APKT 1604 indexable inserts 40 mm cutting diameter for robust removal Four cutting edges for balanced operation Torx M4x10 clamping screw with T15 key Stable rigidity for consistent surface quality The tool body provides a combination of diameter and shank proportions that prioritise stability during milling operations. With a 40 mm cutting diameter and a shank Ø 32 mm, the design reduces vibration and deflection, which yields a more consistent surface finish and longer insert life. The presence of four cutting edges contributes to a balanced cutting action that spreads cutting forces evenly; this is particularly beneficial when repeatability and dimensional reliability are required on serial parts. Fast insert replacement and predictable operating costs Designed around the widely used APKT 1604 insert form, the cutter allows for swift indexable insert changes that reduce downtime. The clamping system uses a Torx M4x10 screw and a T15 key for secure retention and repeatable seating of the insert. Indexable inserts mean that only the insert is replaced when wear occurs, lowering tooling costs per component and simplifying inventory: spare inserts are far less expensive to stock than complete cutters. Workshop-ready dimensions and handling benefit productivity The milling body measures 200 mm overall length with a 55 mm cutting length, providing a practical reach for many shoulder and face milling tasks while remaining manageable in setup. At 1.296 kg the assembly balances mass and handling convenience for manual mounting and machine tool changeovers. The compact package supports efficient tool management in busy machine shops and integrates smoothly into standard toolholding systems that accept a shank of Ø 32 mm. For tailored application guidance and reliable supply of Teknik Makina tooling, contact Metav Werkzeuge — Metav’s specialists in precision measurement and tooling can advise on insert grades, clamping torque and stocking options via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: S283TM Manufacturer: Teknik Makina Brand: Teknik Cutting Tools SKU / UID: S283TM Eclass: 21180806 ETIM: EC011860 Technical facts Cutting diameter: 40 mm Shank diameter: 32 mm Number of cutting edges: 4 Cutting length (shaft): 55 mm Overall length: 200 mm Weight: 1.296 kg Cutting angle: 90° Features & compatibility Compatible insert type: APKT 1604 Compatible insert manufacturer: Korloy Clamping screw: M4x10 Torx Required Torx key size: T15 Indexable-insert milling cutter body Files available: 2 (product documentation) FAQ What insert type fits this cutter? This cutter accepts APKT 1604 indexable inserts; compatibility with Korloy inserts is specified for straightforward procurement and interchangeability. How is the insert secured in the cutter body? The insert is retained with a Torx M4x10 clamping screw; use a T15 key for correct seating and repeatable clamping. Is the cutter suitable for shoulder and face milling? Yes, the tool body’s geometry and 55 mm cutting length make it suitable for common face and shoulder milling operations where APKT 1604 inserts are applicable. What are the key dimensions for toolholder selection? Important dimensions are shank Ø 32 mm, cutting diameter 40 mm and overall length 200 mm; these values help in selecting compatible toolholders and extensions. How does the cutter improve tool-change efficiency? By using indexable inserts (APKT 1604), only the insert needs replacement when worn, reducing downtime and lowering tool expenditure compared with solid-tool replacements. Manufacturer: Teknik Cutting Tools; Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com