Gibt es einen Hahn und Kolb Online Shop?

Take advantage of a secure M5 thread, compact 12 mm overall length and a hex key T20 drive for reliable end‑mill clamping; order the part directly via Metav Werkzeuge or contact our consultants for application advice. Screw TC176TM – Screw for End Mill with M5 thread and T20 drive (Teknik Makina) The Screw TC176TM is a precision clamping screw for end‑mill holders, designed for reliable fixation in compact tool assemblies and suited to workshop and light industrial applications. M5 thread for secure clamping 7.3 mm core diameter for stability 12 mm overall length for compact setups Hex key T20 drive for standard toolholders Consistent clamping from accurate thread geometry The compact clamping element delivers dependable axial force through a precisely cut M5 thread, ensuring stable retention in end‑mill assemblies. The thread form has been selected for repeatable torque transmission, reducing the risk of loosening under lateral loads. Thanks to the 7.3 mm core diameter, the component balances shear strength with minimal bulk, making it suitable for confined toolholder spaces where maintaining rigidity without excess mass matters. This technical specification supports uninterrupted machining cycles and predictable tool life. Fits tight toolholder layouts without compromise With an overall length of 12 mm, this fastening solution is engineered for constrained applications where every millimetre of length counts. The low profile reduces interference with adjacent tooling and simplifies retrofit into existing holders. The hex key T20 drive provides a conventional interface for workshop torque tools and enables controlled tightening with standard torque wrenches or drivers. For operators working across varied fixtures, the combination of compact size and a standard drive type supports fast, repeatable assembly and efficient changeover. Simple integration and inspection for safe operation Assembly and inspection are straightforward: the clamping screw accepts a standard hex key and requires no special tooling, making routine checks part of normal maintenance rounds. Because the geometry is conventional and documented, torque recommendations can be applied consistently across toolrooms, supporting quality assurance protocols. The modest weight (0.10 kg) and uncomplicated design minimise handling time while helping to maintain inventory parity across similar fastenings in the workshop. For secure end‑mill clamping choose the Teknik Makina TC176TM screw and order via Metav Werkzeuge — contact Metav Werkzeuge in Emmerich for product guidance at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: TC176TM Manufacturer: Teknik Makina ECLASS: 21189290 Facts Diameter: 7.3 mm Thread: M5 Overall length: 12 mm Weight: 0.10 kg Special features For end mill clamping Hex key T20 fitting FAQ What is the thread size of the screw? The thread is M5, specified for the TC176TM screw from Teknik Makina to provide reliable clamping force. Which drive tool is required for installation? Installation requires a hex key T20, matching the drive recess on the Teknik Makina TC176TM clamping screw. Is the component suitable for compact toolholders? Yes, the 12 mm overall length and 7.3 mm core diameter make the TC176TM suitable for compact end‑mill holders where space is limited. How much does the screw weigh? The screw has a listed weight of 0.10 kg, which supports easy handling and stock management. Can the screw be used across different end‑mill brands? The screw is intended for standard end‑mill clamping arrangements and, provided the toolholder accepts an M5‑threaded clamping element with a T20 drive, the Teknik Makina TC176TM is compatible Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of insert compatibility, compact shank design and secure Torx fixing for efficient, reproducible milling operations; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Teknik Makina Insert Milling Cutter S004TM – for APMT 0602 indexable inserts, 12 mm shank Insert milling cutter S004TM designed for flexible face and shoulder milling with APMT 0602 indexable inserts in industrial production environments 12 mm shank diameter for standard toolholders Fits APMT 0602 indexable inserts Three cutting edges for balanced cutting T6 Torx fixing with M2x4.2 screw High repeatability through a familiar insert system The cutter is built around the widely used APMT 0602 indexable inserts, which ensures quick refits and consistent cutting geometry across batches. With a 90° cutting angle and a configuration of three cutting edges, the tool delivers stable engagement in shoulder and face milling tasks, reducing chatter and rework. Compatibility with Korloy insert variants simplifies procurement and inventory control for production shops that standardise on that insert family. The emphasis is on predictable, measurable output: repeatable part geometry and shortened set-up times. Secure clamping and compact dimensions for tight set-ups A 12 mm shank diameter combined with an overall length of 80 mm and a cutting length of 25 mm creates a compact package that suits close-quarter toolchanger environments and clustered machining operations. Fixing is achieved with a T6 Torx key and an M2x4.2 screw, offering a reliable, repeatable clamping interface that reduces insert movement under load. At just 0.06 kg, the cutter is light to handle during set-up, whilst retaining the stiffness required for stable milling. These mechanical details translate directly into shorter machine idle times and higher first-pass yields. Procurement-friendly data and workshop integration Identification and inventory are simplified by clear classification: SKU S004TM, eClass 21180806 and ETIM EC011860 are provided for ERP systems and purchasing workflows. The tool’s three-edge configuration and standardised insert form mean spare parts planning is straightforward and swaps are rapid. For production facilities seeking steady supply and technical clarification, Metav Werkzeuge supplies product information and application guidance to support integration into existing tool inventories and CAM strategies. Technical documentation files are available for download to support inspection and process documentation. For reliable integration of Teknik Makina tools into production, contact Metav Werkzeuge to discuss the S004TM insert milling cutter and receive expert guidance on tooling application and procurement. Technical data Article number: S004TM Manufacturer: Teknik Makina eClass: 21180806 ETIM: EC011860 Facts Shank diameter: 12 mm Cutting length: 25 mm Overall length: 80 mm Number of cutting edges: 3 Cutting angle: 90° Weight: 0.06 kg Special features Compatible inserts: APMT 0602 Compatible insert manufacturer: Korloy Torx key: T6 Torx screw: M2x4.2 SKU in shop: S004TM FAQ What insert type is required for this cutter? The cutter accepts APMT 0602 indexable inserts; Korloy-compatible inserts are listed as suitable for the S004TM. How is the insert secured in the cutter? Insert clamping is performed using a T6 Torx key and an M2x4.2 screw on the S004TM, providing a secure and repeatable fixing method. What are the key dimensions for toolholder selection? Relevant dimensions for holder selection include the 12 mm shank diameter, overall length 80 mm, and cutting length 25 mm for the S004TM. Can the cutter be used for tight-access milling operations? The combination of a compact 80 mm overall length and 12 mm shank makes the cutter suitable for constrained tool-change and clustered-fixture scenarios. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, stiff clamp design with a 5 mm shank and secure M6 thread for reliable toolholding in confined setups; order directly via Metav Werkzeuge or consult the Metav team for technical advice and availability. Mini clamp holder DC320TM – compact clamp holder with 5 mm shank and M6 thread (Teknik Makina) The Mini clamp holder DC320TM is a compact clamp holder engineered for precise, secure clamping in small machining and tooling arrangements. Compact design for tight toolposts 5 mm shank for small tool holders M6 fixing thread for secure attachment 88 mm overall length, 12 mm body diameter Space-saving stiffness for more consistent machining The compact construction delivers a high stiffness-to-size ratio, allowing stable clamping where space is limited. Reduced tool movement leads to fewer vibrations and a more consistent surface finish, which in turn supports shorter cycle times and less rework. The compact format is particularly beneficial in small-batch production or when multiple tools must be mounted close together, offering a reliable way to keep setups compact without sacrificing performance. Clear dimensions and simple integration into existing systems Key dimensions are provided for straightforward integration: a 5 mm shank, a 12 mm body diameter, an M6 thread and an 88 mm overall length, with a net weight of 0.067 kg. The slim shank suits small toolholders and accessory adaptors, while the thread specification ensures compatibility with common clamping screws. These concrete values enable planners and buyers to verify fitment quickly and reduce trial-and-error at the machine. Fast assembly and stable clamping reduce downtime The straightforward attachment concept and standard thread size deliver a short setup time and predictable clamping behaviour. Fewer adjustments at the machine mean less downtime between operations; the result is a small but practical improvement in production flow. For workshops consolidating tooling stock, the holder’s compact profile supports denser tool layouts and quicker changeovers, benefitting operational efficiency. Trusted supply chain and practical procurement Sourcing the holder from a reliable distributor ensures consistent availability and traceable quality. Metav combines a broad industrial range with local warehouse supply from Emmerich, backed by a history of satisfied customers. With a reputation built on accessibility and dependable logistics, Metav supports single-source procurement strategies that reduce administrative overhead and maintain steady workshop supply. Contact Metav Werkzeuge to confirm suitability for specific toolposts and to check stock status at the Emmerich warehouse Technical Data Article number: DC320TM Manufacturer: Teknik Makina Weight: 0.067 kg Key dimensions Shank diameter: 5 mm Body diameter: 12 mm Overall length: 88 mm Thread: M6 Features Mini clamp holder Story trigger: klemmhalter SKU: DC320TM FAQ What materials and operations is this clamp holder designed for? The Mini clamp holder DC320TM is a general-purpose clamping component suitable for small tooling assemblies; material-specific suitability depends on the tool and machine configuration. How is the holder secured to the toolpost? Fixing is via the M6 thread, which provides a standard interface for clamping screws and secure attachment in compact setups. Which shank size must the toolholder accept? The holder uses a 5 mm shank, so a compatible receiver or adaptor with a 5 mm acceptance bore is required for proper installation. Is this item lightweight enough for quick tool changes? At 0.067 kg, the DC320TM is lightweight and supports rapid handling during tool changes while maintaining sufficient stiffness for many small-scale machining tasks. Can the DC320TM be used on CNC lathes or manual lathes? The component is suitable for both CNC and manual lathe setups provided the toolpost or adapter accepts the specified shank and thread dimensions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the compact 12 mm shank and 88 mm overall length for precise small-diameter operations; the balance of reach and rigidity supports stable machining. Order the product directly via Metav Werkzeuge or consult our technical advisors for suitability. Mini clamp holder D12 d03 L88 – 12 mm compact clamp holder by Teknik Makina A Mini clamp holder for compact turning and small‑diameter machining that combines a 12 mm shank with an 88 mm overall length for space‑limited setups and reliable clamping. 12 mm shank for tight toolholders 88 mm overall length for balanced reach Space-saving compact design Precision clamping interface Optimised rigidity and reach for tight setups The compact design delivers a balance between rigidity and reach: the short 88 mm overall length reduces cantilevering while the 12 mm shank keeps the holder suitable for dense toolpost arrangements. For small‑diameter applications this means fewer vibrations and improved surface finish. The construction supports repeatable position and alignment, helping to keep cycle times consistent while maintaining accuracy in close‑quarter machining environments. Precision clamping that simplifies setup and repeatability A clear advantage of this clamping solution is the precision clamping interface, which allows quick, stable fixation of the cutting element. The clamping mechanism is designed to ensure consistent seat contact and minimal play, improving repeatability across batches. For workshops that value predictable results, the compact holder reduces the need for frequent re‑adjustment and streamlines setup procedures in serial production or prototyping. Versatile use in small‑diameter turning and finishing tasks Designed for compact turning operations, the holder is particularly suitable where space constraints demand a slim toolholder without sacrificing control. The compact form factor supports finishing passes and light roughing on small shafts and components. Explained simply: a shorter, accurately machined holder keeps the tool closer to the spindle, which reduces deflection and helps achieve tighter tolerances on critical features. Practical information for integration and selection The product is supplied with a clear designation and SKU for easy procurement and inventory control. The compact format makes integration into existing toolposts straightforward when the machine accepts a 12 mm‑diameter shank. When selecting tooling, consider the balance between reach and stiffness required by the component geometry; the reduced projection of this holder generally favours improved surface quality and tool life in constrained setups. Choose the Teknik Makina mini clamp holder DC300TM for compact precision — contact Metav Werkzeuge for application advice and reliable supply from Emmerich. Technical data Article number: DC300TM Name: Mini clamp holder D12 d03 L88 Product type: Mini clamp holder Label: 12mm Mini-Stechklemmhalter L88mm eClass: 21181005 Brand: Teknik Makina Facts Diameter: 12 mm Overall length: 88 mm UID/SKU: DC300TM Special features Compact design Precision clamping interface Suitable for small‑diameter turning Category: Machining / Cutting FAQ What is the shank diameter of the holder? The shank diameter is 12 mm for the Teknik Makina mini clamp holder DC300TM, enabling use in compact toolpost arrangements. How long is the toolholder overall? The overall length is 88 mm, which provides a balance of reach and stiffness for small‑diameter operations with the DC300TM. Is the holder suitable for finishing small shafts? Yes, the compact format and stable clamping interface make this holder appropriate for finishing and light roughing on small shafts. How is repeatability ensured with this holder? Repeatability is achieved through the precision clamping interface and short projection, both features of the Teknik Makina DC300TM mini clamp holder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Compact 12 mm form factor combined with an 88 mm overall length delivers space-efficient, repeatable performance for parting and grooving operations. Benefit from precise clamping and reduced vibration for improved surface finish; order the Mini-Stechklemmhalter DC321TM directly via Metav Werkzeuge or ask our consultants if needed. Mini-Stechklemmhalter D12 d06 L88 – 12 mm mini clamp holder by Teknik Cutting Tools A compact clamp holder designed for parting and grooving in confined toolposts, featuring a 12 mm shank and an 88 mm overall length for space-critical machining. Slim 12 mm shank for tight toolposts 88 mm overall length for compact setups Stable clamping for consistent surface finish Space-saving precision for confined toolposts The 12 mm shank and 88 mm overall length make this mini clamp holder ideal where clearance is limited. Its reduced envelope enables closer tool placement and denser toolpost setups, which supports shorter tool overhangs and thereby lowers bending moments. The result is improved repeatability and a measurable reduction in workpiece deviation during parting or grooving tasks — a practical advantage in small-batch production and prototype machining where fixture space is at a premium. Stable clamping that improves finish and cycle reliability A well-engineered clamping geometry provides stability under cutting loads, helping to suppress chatter and minimise tool deflection. By securing the cutting edge more rigidly, the holder contributes directly to a consistent surface finish and longer effective insert life. For operations where every micrometre counts, this holder translates mechanical restraint into fewer reworks and a steadier machining cycle time, supporting predictable throughput in mixed-production environments. Straightforward integration into existing lathe toolposts Designed as a compact component for standard toolposts, the mini clamp holder is simple to fit and align. The compact design reduces changeover effort between setups and lowers the need for customised fixtures. Identified as DC321TM, the holder can be catalogued and referenced easily for maintenance planning and inventory control, facilitating faster procurement and fewer tooling interruptions on the shop floor. Practical benefits for workshops and small-scale manufacturers Choosing a compact holder like this one supports leaner tooling strategies: less interference, faster clamping, and better use of limited turret positions. The technical simplicity of the design translates into operational confidence — machines stay productive and set-up times shrink. Paired with Metav’s commitment to reliable supply from Emmerich, buyers gain both a functional component and the assurance of consistent availability for repeat orders. Choose the Teknik Cutting Tools mini clamp holder DC321TM for compact precision and contact Metav Werkzeuge in Emmerich for ordering and tailored technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: DC321TM Product type: Mini clamp holder Label: 12mm Mini-Stechklemmhalter L88mm Core data Diameter: 12 mm Overall length: 88 mm ECLASS: 21181005 Special features Manufacturer: Teknik Makina UID: DC321TM Product designation: Mini-Stechklemmhalter FAQ What shank diameter does the holder support? The holder is specified with a 12 mm shank diameter and is intended for compact toolholder arrangements. What is the overall length and why does it matter? The overall length is 88 mm; a shorter profile helps reduce overhang, lowering deflection and improving machining stability. Is this holder suitable for standard lathe toolposts? Yes, the design of the Mini-Stechklemmhalter DC321TM allows straightforward fitting to common compact toolpost systems used in parting and grooving. How is the product identified for ordering and stock control? The item is listed under SKU/Article number DC321TM, which simplifies reordering and inventory tracking. Which manufacturer produces this mini clamp holder? The component is made by Teknik Makina and supplied under the designation Mini-Stechklemmhalter, DC321TM, for compact parting applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact, low-mass design combined with a secure M6 mounting for reliable parting and grooving cycles; order or request availability through Metav Werkzeuge for straightforward integration into small turning centres. Mini-Stechklemmhalter – Mini parting clamp holder, 12 mm diameter, M6 thread (Teknik Makina) A Mini-Stechklemmhalter crafted for secure parting and grooving in compact turning setups, ideal where space is limited and repeatable clamping is required. Compact 88 mm overall length 12 mm cutting diameter compatibility M6 thread for secure mounting Only 0.075 kg for low inertia Increased process reliability through compact clamping The compact construction delivers a stable clamping interface in confined setups. With an overall length of 88 mm and a small form factor, the holder reduces overhang and helps maintain concentricity during cut-off operations. The lightweight nature contributes to reduced dynamic forces, which supports repeatable results when machining short-facing and parting tasks. This benefits workshops that prioritise consistent component tolerances and short setup times. Secure mounting and mechanical simplicity Featuring an M6 thread and a standard 4 mm shank reception, the component secures quickly and precisely into compatible toolposts or adapters. The straightforward mechanical design minimises adjustment effort while ensuring a tight hold for parting blades with up to 12 mm effective diameter. Such a simple interface shortens fixture time and lowers the risk of misalignment, so cycle reliability is improved without complex fixturing. Space-saving design for small lathes and finishing stations Designed for compact turning centres, the low profile and minimal mass of the clamp holder reduce the occupied envelope at the turret or toolpost. This makes it suitable for dense tool arrays and multi-station setups where conserving radial and axial space is essential. The reduced inertia of the assembly enhances responsiveness during feed changes, contributing to smoother cut-off transitions and less vibration during interrupted cuts. Practical integration and workshop advantages Supplied as a precise mechanical clamp, the holder supports fast changeovers and straightforward tool positioning. The balance between a small diameter interface and secure thread mounting supports efficient workflow in small-batch production and maintenance tasks. Available under the SKU DC310TM, the item is intended as a pragmatic solution for shops seeking compact, reliable parting performance without extensive retooling. Discuss compatibility and availability with Metav Werkzeuge: info@metav-werkzeuge.com or +49 2822 7131930 — specialists can advise on the Teknik Makina DC310TM mini parting clamp holder Technical data Article number: DC310TM Designation: Mini parting clamp holder Brand: Teknik Makina Facts Diameter: 12 mm Shank reception diameter: 4 mm Thread: M6 Overall length: 88 mm Weight: 0.075 kg Special features Compact design for limited spaces Mechanical clamping for parting and grooving Low mass to reduce toolholder inertia FAQ What tool diameter is supported by the holder? The holder accommodates a 12 mm cutting diameter, providing a compact interface for small parting blades and narrow grooving tools. How is the clamp holder secured to the toolpost? Mounting is achieved via an M6 thread together with the 4 mm shank reception; the DC310TM uses this mechanical interface for a secure fit. Is the holder suitable for heavy-duty cut-off operations? The DC310TM is optimised for compact setups and low-inertia applications; suitability for heavy-duty tasks depends on machine capacity and tool selection. Can the component be used in multi-station turrets? Yes, the compact length and low weight make it suitable for dense tool arrangements and finishing stations where space is limited. Which SKU should be referenced when ordering or enquiring? Please refer to SKU DC310TM when requesting stock or technical details for the Technik Makina mini parting clamp holder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact A10J SCLCR design with internal coolant and proven compatibility with CC-- 0602 indexable inserts to keep internal boring operations precise and productive; order via Metav Werkzeuge or request specialist advice from our consultants. Boring bar A10J SCLCR – SCLC for CC-- indexable inserts (Teknik Cutting Tools) The A10J SCLCR boring bar SCLC for CC-- indexable inserts offers right-hand internal turning and boring with internal coolant for stable chip evacuation and extended insert life. Internal coolant supply Compatible with CC-- 0602 inserts 12 mm nominal diameter Right-hand cutting direction Precise internal boring with controlled coolant flow The compact design of this boring bar delivers consistent concentricity for internal turning tasks. The built-in internal coolant directs cutting fluid to the insert seat, improving chip control and reducing heat at the cutting edge. For users working with small bores, the 12 mm nominal diameter coupled with a 10 mm shank provides a balance between rigidity and accessibility, enabling cleaner finishes and longer interval times between insert changes. The ISO designation A10J SCLCR indicates a standardised mounting form for straightforward toolholder integration. Reliable insert pairing for repeatable results Designed for CC-- 0602 indexable inserts, the tool head geometry supports secure clamping and quick indexability. The specified 95° cutting angle is optimised for internal facing and light bore enlargement, giving a stable cutting geometry that minimises vibration. By using standard insert types, workshop logistics are simplified: spares are widely available and exchange is quick, which reduces machine downtime and supports predictable cycle times in production environments. Small form factor that supports workshop efficiency With an overall length of 110 mm and a weight around 0.074 kg, this SCLC bar suits compact machining setups where tool reach and clearance are restricted. The 10 mm shank diameter ensures compatibility with common toolholders while maintaining sufficient stiffness for short to medium overhangs. These dimensional choices make the tool well suited for small-batch work and precision finishing operations where a slim tool body is required without compromising stability. Practical benefits for procurement and process planning Using a standardised boring bar that accepts indexable inserts provides a clear cost-benefit: replaceable carbide inserts reduce consumable costs compared with monolithic tooling, and the internal coolant option extends cutting edge life under continuous operation. The right-hand cutting direction and standard ISO form mean the tool integrates easily into existing tool lists and CAM programmes. For engineers specifying tooling, this offers a dependable option for internal turning tasks where consistent surface quality and operational uptime are priorities. For direct procurement or tailored setup guidance on the Teknik Cutting Tools A10J SCLCR, contact Metav Werkzeuge in Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 for expert assistance and delivery options Technical Data SKU: KA104TM ISO designation: A10J SCLCR Product name: SCLC for CC-- Indexable Inserts Manufacturer: Teknik Makina Facts Diameter: 12 mm Shank diameter: 10 mm Overall length: 110 mm Cutting height: 20 mm Weight: 0.074 kg Cutting angle: 95° Special features Direction of cut: right Internal coolant: yes For indexable inserts: CC-- 0602 Suitable insert form: SCLC FAQ What insert type fits this boring bar? The boring bar accepts CC-- 0602 indexable inserts and is specified for SCLC insert form, enabling straightforward insert replacement. Is internal coolant available on this tool? Yes, the A10J SCLCR is equipped with internal coolant to direct fluid to the cutting zone and improve chip evacuation. What are the main dimensions to check for toolholder compatibility? Key dimensions are a 12 mm nominal diameter, 10 mm shank diameter and 110 mm overall length; the ISO designation A10J SCLCR helps confirm holder match. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of compact dimensions, reliable clamping and integrated internal coolant for consistent left-hand turning performance. Order the clamping holder directly via Metav Werkzeuge or consult our technical advisers for integration support. SVJCL 1212 clamping holder (SVJC for VCMT indexable inserts) — left-hand cut, internal coolant — Teknik Makina The SVJCL 1212 clamping holder is a compact, left-hand clamping solution for turning with VCMT 1103 indexable inserts, offering internal coolant and a robust Torx clamp screw. Compact 12 × 12 mm toolholder profile Internal coolant for improved tool life Compatible with VCMT 1103 indexable inserts Left-hand cutting with 93° cutting angle Precise clamping for stable left-hand turning The holder delivers repeatable positioning through a proven clamping geometry and an ISO designation SVJCL 1212, which ensures interchangeability across setups. Designed for left-hand cutting, the tool supports VCMT 1103 inserts, allowing predictable chip formation and consistent surface finish. The combination of a compact cross-section and a secure Torx screw system provides reliable clamping, which reduces vibration and contributes to longer insert life — a clear advantage for batch production and short-cycle work. Compact design that saves space and simplifies maintenance With a small cross-section of 12 mm × 12 mm and an overall length of 110 mm, the holder is intended for tight toolstations and multi-tool turret machines. The clamping screw specification M2.5×6.5 with T8 key access enables fast insert changes and straightforward maintenance. The compact form factor minimises interference when using adjacent tools and shortens set-up times, supporting higher machine utilisation and easier toolroom handling. Integrated coolant and geometry that improve process stability Internal coolant routing is built into the holder to deliver cutting fluid close to the insert rake, helping to control temperature and flush chips from the cutting zone. Coupled with a 93° cutting angle, the assembly is engineered for controlled cutting forces and effective chip flow on left-hand operations. This arrangement promotes enhanced tool life and more consistent component quality, especially in medium to high-material-removal tasks where thermal control matters. Practical compatibility and straightforward deployment The holder is specified to accept VCMT 1103 indexable inserts and is referenced by its ISO code, making it compatible with established tooling systems. At a weight of 0.1 kg, the component is easy to handle during set-up and rotation changes. The short list of attachment details and the standardised design reduce procurement complexity and simplify tool inventory management in the workshop or production cell. For left-hand turning operations that demand compactness and coolant-through capability, choose the Teknik Makina SVJCL 1212 clamping holder — request a quote or technical advice from Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application-specific integration. Technical Data Article number: AP537TM Manufacturer: Teknik Makina ISO designation: SVJCL 1212 Compatible inserts: VCMT 1103 Dimensions & weight Width: 12 mm Height: 12 mm Cutting head width: 12 mm Overall length: 110 mm Overall height: 12 mm Cutting height: 32 mm Cutting angle: 93° Weight: 0.1 kg Special features Internal coolant Left-hand cutting direction Torx screw M2.5×6.5, Torx key T8 Compatible with VCMT 1103 indexable inserts FAQ What inserts fit this clamping holder? The SVJCL 1212 clamping holder is designed for VCMT 1103 indexable inserts and offers correct seat support for those insert dimensions. Is coolant-through supported? Yes, the holder features internal coolant to supply cutting fluid directly to the insert rake for improved cooling and chip evacuation. Which cutting direction is intended for this tool? This holder is configured for left-hand cutting, with a tool geometry optimised for left-hand turning operations. What are the fastening details for the insert clamp? Clamping is provided via a Torx screw M2.5×6.5 and requires a T8 Torx key for tightening and release. What is the SKU and who manufactures the tool? The product is listed as AP537TM and manufactured by Teknik Makina; the ISO code for the holder is SVJCL 1212. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining compatibility with CC-- 0602 indexable inserts and a compact Ø10 mm shank, this boring bar offers stable, precise finishing in confined bores; its 95° cutting angle and 20 mm cutting height support repeatable tool engagement. Order the tool directly via Metav Werkzeuge or request specialist advice from our consultants. Boring Bar SCLC for CC-- Indexable Inserts (S10J SCLCL) — left‑hand, Ø10 mm shank The Boring Bar SCLC for CC-- Indexable Inserts is a left‑hand turning holder engineered for internal finishing and light‑duty boring with CC-- 0602 indexable inserts Left‑hand cutting direction for specialised turning Compatible with CC-- 0602 indexable inserts Ø10 mm shank with 110 mm overall length 95° cutting angle for precise finishing Stable performance in restricted bores Designed for operations where space and stability matter, this tool delivers a compact, well‑balanced solution. The Ø10 mm shank and 110 mm overall length reduce overhang and help to minimise vibration, which leads to improved surface finishes and longer insert life. The S10J SCLCL designation indicates a standardised holder geometry that integrates securely into common turret and toolpost systems, allowing consistent positioning of the cutting edge during indexable‑insert turning. Accurate chip control and cutting geometry The combination of a 95° cutting angle and 20 mm cutting height supports controlled chip formation and reliable tool engagement, especially during light finishing cuts. Compatibility with CC-- 0602 inserts provides access to widely available geometries and grades, enabling the selection of coatings and substrate grades to match the workpiece and cutting conditions. The tool’s left‑hand orientation is suited to specific turning directions and setup requirements in CNC lathes and manual lathes that demand reverse cutting motion. Practical benefits for workshop efficiency With a low mass of 0.08 kg and a compact 12 mm diameter at the cutting head, the holder is easy to mount and requires minimal counterbalancing in multi‑tool assemblies. Reduced inertia speeds tool changes and contributes to quicker cycle stabilisation after indexing. The indexable design means inserts can be rotated or replaced without removing the holder, cutting downtime and simplifying post‑process maintenance. As a standardised SCLC style holder, the component integrates into existing tooling systems while offering predictable cutting behaviour. Purchase advice and supply reliability For customers evaluating tool fitment or selecting insert grades, the holder’s clear specifications—S10J SCLCL geometry, compatibility with CC-- 0602 inserts, left‑hand cutting direction, and the compact Ø10 mm shank—simplify the decision process. Metav’s Emmerich facility acts as a quality filter for the European market, offering reliable stock and order processing. For further technical data or application recommendations, the Metav team can assist with setup advice and insert selection to match machining goals. Contact Metav Werkzeuge for tailored advice on Teknik Cutting Tools boring bars and secure supply direct from Emmerich Technical data Article number: K234TM Manufacturer: Teknik Makina Type designation: S10J SCLCL Product name: Boring bar SCLC for CC-- Indexable Inserts Cutting direction: left Facts Shank diameter: 10 mm Cutting height: 20 mm Weight: 0.08 kg Diameter (cutting head): 12 mm Overall length: 110 mm Cutting angle: 95° Special features Compatible inserts: CC-- 0602 Holder style: SCLC for indexable inserts Left‑hand cutting orientation Compact, low‑mass design FAQ What insert type fits this holder? The holder accepts CC-- 0602 indexable inserts; this compatibility enables selection of grades and geometries suited to finishing tasks. Is the cutting direction standard or left‑hand? This tool is supplied in a left‑hand cutting direction, intended for operations that require reverse turning motion. What are the key dimensions to check for machine compatibility? Relevant dimensions include the Ø10 mm shank, 110 mm overall length, 12 mm head diameter and 20 mm cutting height; verify turret clearance and mounting for these values. Can the holder be used for heavy roughing? The design and compact shank are optimised for finishing and light‑duty boring; for heavy roughing, a larger‑section holder and suitable insert grade are recommended. Who manufactures the tool and where is supply handled? The tool is supplied by Teknik Cutting Tools and distributed via Metav Werkzeuge, which manages stock and order fulfilment from Emmerich. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high‑precision boring solution that combines stable Ø12 mm performance, compatibility with DC-- 0702 indexable inserts and a slim shank Ø10 mm for tight setups — order the tool via Metav Werkzeuge or contact their consultants for specification advice. Boring bar S10J SDQCL — indexable boring bar, left‑hand, Ø12 mm — Teknik Makina The Boring bar S10J SDQCL is a left‑hand, indexable tool intended for precision internal turning and boring where standard DC-- 0702 inserts are used, offering a compact 110 mm overall length for confined workspaces Left‑hand cutting for specific machining directions Compatible with DC-- 0702 indexable inserts Ø12 mm diameter for stable boring Shank Ø10 mm, 110 mm overall length Engineered for consistent chip control and reliable cutting The design focuses on precision and vibration dampening to maintain consistent bore quality. A cutting angle of 107.5° and a defined cutting height of 20 mm deliver controlled chip flow when paired with the compatible indexable inserts, reducing rework and improving first‑pass yield. The combination of a compact diameter and tailored geometry provides predictable cutting forces, making the bar suitable for sequential machining operations where repeatability is essential. Clear compatibility and straightforward tool integration Built to accept DC-- 0702 inserts, the S10J SDQCL format simplifies tool management and spare‑part logistics. The ISO designation S10J SDQCL and the clamping provision marked as 07 ensure interchangeability with standard clamping holders, so changeovers are faster and tool inventories remain lean. This compatibility reduces setup time and supports a more efficient production flow, particularly in shops that standardise on indexable insert systems for internal turning. Practical handling for workshop use and tight set‑ups At just 0.08 kg and with a shank Ø10 mm, the boring bar offers easy handling during setup and is well suited to compact spindle or bar‑feed fixtures. The overall length of 110 mm helps to keep overhang to a minimum in confined bores, thereby improving stability. Where space is restricted, the combination of small diameter and robust clamping reduces the risk of deflection and supports higher process reliability over extended production runs. Dependable choice for standardised indexable tooling systems This solution is aimed at professional workshops and CNC departments seeking a dependable boring bar that integrates into existing indexable insert programmes. The left‑hand cutting configuration and standard insert compatibility make it a pragmatic addition to a toolpack, emphasising uptime and consistent results rather than exotic custom tooling. For operations that prioritise repeatable internal finishes and straightforward maintenance, this bar represents an efficient, low‑maintenance option. Contact Metav Werkzeuge for technical clarification and to arrange supply of the Teknik Makina S10J SDQCL boring bar; their consultants can confirm fitment and delivery from Emmerich Technical Data SKU: K270TM ISO designation: S10J SDQCL Brand: Teknik Makina Core data Diameter: 12 mm Shank diameter: 10 mm Cutting height: 20 mm Overall length: 110 mm Weight: 0.08 kg Cutting angle: 107.5° Special features Compatible with DC-- 0702 inserts Indexable inserts application Left‑hand cutting direction Clamping holder designation: 07 Designation (EN): SDQC for DC-- Indexable Inserts FAQ Which inserts fit this boring bar? The S10J SDQCL boring bar from Teknik Makina accepts DC-- 0702 indexable inserts as specified, ensuring standardised insert availability. What is the cutting direction of the tool? This tool is a left‑hand boring bar; the left cutting direction is suitable for applications requiring that orientation. What are the key dimensions to check for machine compatibility? Important dimensions are Ø12 mm cutting diameter, shank Ø10 mm, and 110 mm overall length; confirm these against the machine spindle or holder envelope. Is the bar suitable for tight bores and reduced overhangs? Yes — the compact 110 mm length and slim shank are intended for confined setups where reduced overhang improves stability. How is the bar identified for ordering or stock management? Order or reference the Teknik Makina S10J SDQCL boring bar (SKU K270TM) to ensure the correct left‑hand, DC-- 0702 compatible tool is supplied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, right‑hand toolholder that accepts DC-- 0702 indexable inserts and offers a stiff shaft diameter of 10 mm for consistent turning results; order via Metav Werkzeuge or consult the team for tailored advice. Boring bar S10J SDQCR – SDQC for DC-- indexable inserts, right‑hand (Teknik Cutting Tools) The boring bar S10J SDQCR is a compact toolholder designed for turning applications with DC-- 0702 indexable inserts, optimised for right‑hand cutting in confined setups. Right‑hand cutting for standard turning For DC-- 0702 indexable inserts Shaft diameter 10 mm, compact 110 mm length Consistent metalcutting through controlled geometry A precisely engineered toolholder delivers reproducible results in series turning work. The combination of the SDQCR geometry and a cutting angle of 107.5° reduces radial loading and helps maintain stable chip flow, which translates into better surface finish and predictable tool life. The relatively small shaft diameter of 10 mm contributes to access in tight bores while being dimensioned to retain sufficient stiffness; this balance is crucial when machining where rigidity and repeatability determine part quality. Fast setup and clear compatibility for production use Integration into a production process is simplified by the clear interface to DC-- 0702 indexable inserts and the documented ISO designation S10J SDQCR. The insert pocket and clamp designation 07 allow standardised clamping and straightforward insert changes, which reduces downtime during shifts. The right‑hand orientation and standardised insert form mean the toolholder is compatible with common turning programmes; maintenance is limited to routine inspection of the clamping screw and insert seating, keeping process interruptions to a minimum. Practical benefits for workshop efficiency Compact dimensions and a low mass of 0.08 kg make handling and fixturing easier on small lathes and multi‑spindle machines, while the overall length of 110 mm keeps the tool within reach of tight setups. The holder’s suitability for indexable turning operations supports a cost‑efficient production flow by enabling quick index changes rather than full resharpening. For procurement, the combination of robust geometry and standard insert compatibility supports predictable stocking and reduces the variety of spare parts required on the shop floor. Contact Metav Werkzeuge for expert advice and reliable supply from Emmerich – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: K140TM Manufacturer: Teknik Makina Designation EN: SDQC for DC-- Indexable Inserts ISO designation: S10J SDQCR Numeric data Shaft diameter: 10 mm Cutting height: 20 mm Diameter: 12 mm Overall length: 110 mm Weight: 0.08 kg Cutting angle: 107.5° Special features For indexable inserts DC-- 0702 Clamp designation: 07 Right‑hand cut / SDQCR geometry Compact, lightweight design FAQ What insert type fits this toolholder? The toolholder accepts DC-- 0702 indexable inserts; compatibility is defined by the SDQCR pocket geometry and clamp designation 07. Is this holder suitable for right‑hand turning only? Yes, the geometry is configured for a right‑hand cut, matching conventional turning directions on lathes. What are the key dimensions to check for machine setup? Relevant dimensions are shaft diameter 10 mm, overall length 110 mm and cutting height 20 mm; these determine reach and clearance. Which identifier should be quoted when ordering? Quote the article number K140TM and the ISO designation S10J SDQCR to ensure the correct item is supplied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, left‑hand boring bar that pairs precision compatibility with SDUC DC-- 0702 inserts and a rigid 10 mm shank for stable internal turning; order directly via Metav Werkzeuge or contact the consultants for application advice. Boring bar S10J SDUCL – left‑hand SDUC holder for DC-- 0702 indexable inserts by Teknik Makina The Boring bar S10J SDUCL is a left‑hand tool holder engineered for precise internal turning with SDUC indexable inserts, suitable for compact bores and standard toolholders Left‑hand cutting orientation Fits SDUC DC-- 0702 inserts 10 mm shank for standard holders 110 mm overall length for reach and control Precision insert compatibility reduces setup time and ensures repeatable results The holder is designed for SDUC style indexable inserts, specifically the DC-- 0702 format, so indexable tips can be changed quickly without reclamping the tool body. This configuration keeps cycle times predictable: the insert pocket geometry and a near‑right cutting angle (93°) promote controlled chip flow and consistent surface finish. For workshops unfamiliar with insert design, an indexable insert is a small, replaceable cutting tip; using these reduces downtime compared with regrinding solid tools and supports rapid adaptation to differing materials. The combination of insert standardisation and a defined left‑hand orientation supports repeatable set‑ups on lathes and CNC turning centres. Compact dimensions deliver rigidity and access in confined bores With a 10 mm shank, 12 mm nominal diameter, and 110 mm overall length, the bar balances accessibility and stiffness for internal turning operations where space is limited. A 20 mm cutting height ensures adequate engagement for typical bore finishing tasks while the low mass (0.08 kg) minimises unproductive overhang. In practice this means reduced vibration and better concentricity when boring small to medium bores, which benefits tolerance control and surface integrity. The compact footprint also allows integration into multi‑tool turrets and modular boring systems without compromising tool clearance. Simple integration and clear identification for efficient workshop logistics The ISO designation S10J SDUCL and clamping designation 07 provide a straightforward reference when matching the bar to compatible toolholders and insert families. Identification by SKU (K250TM) and ISO code simplifies stock keeping and reordering, while the left‑hand geometry complements existing tool inventories where counter‑rotation or left‑hand cutting is required. The design supports a pragmatic workflow: fewer bespoke setups, predictable tooling behaviour and faster changeovers, which together contribute to a steadier production output and easier inventory management. For reliable left‑hand boring solutions based on the Teknik Makina S10J SDUCL, contact Metav Werkzeuge for ordering details and application guidance via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data SKU: K250TM ISO designation: S10J SDUCL Product type: SDUC boring bar for DC-- 0702 inserts Brand: Teknik Makina Facts Shank diameter: 10 mm Cutting height: 20 mm Weight: 0.08 kg Overall length: 110 mm Diameter: 12 mm Cutting angle: 93° Special features Left‑hand cutting direction Compatible with DC-- 0702 indexable inserts Clamping designation: 07 Compact, lightweight design FAQ Which inserts are compatible with this holder? This holder accepts SDUC indexable inserts in the DC-- 0702 size; the S10J SDUCL configuration secures the insert for stable cutting. Is the cutting orientation left‑hand or right‑hand? The bar is manufactured for left‑hand cutting operations, specified as left orientation in the product data for the Teknik Makina S10J SDUCL (SKU K250TM). What are the shank diameter and overall length? Shank diameter is 10 mm and overall length is 110 mm, suitable for confined bores and standard toolholder mounts. Which clamping designation should be matched for toolholders? Match holders that accept clamping designation 07 to ensure correct fixation and alignment with this SDUC boring bar. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise insert compatibility and a compact design: the S10J SDUCR boring bar combines a 10 mm shank with compatibility for DC--0702 indexable inserts to deliver stable internal turning and consistent surface finish in restricted bores. Order the S10J SDUCR directly via Metav Werkzeuge or consult their specialists for application guidance. S10J SDUCR boring bar – for DC--0702 indexable inserts, 10 mm shank (Teknik Makina) The S10J SDUCR boring bar is a right-hand toolholder engineered to accept DC--0702 indexable inserts for internal turning and finishing operations in production and toolroom environments S10J SDUCR ISO shank for stability 10 mm shank diameter, 110 mm overall length Compatible with DC--0702 indexable inserts Right-hand cutting with 93° cutting angle Stable geometry for consistent surface finish The tool's ISO designation S10J SDUCR and compact proportions are designed to reduce vibration and maintain repeatable cutting geometry. A 10 mm shank and 110 mm overall length balance reach and rigidity, allowing stable engagement in confined bores while keeping bending moments low. The result is improved surface finish and longer insert life compared with less rigid holders, which supports predictable process outcomes in series production. Standardised insert system for quick changeovers Compatibility with DC--0702 indexable inserts simplifies tooling logistics: inserts are widely available and enable rapid replacement without regrinding. The holder accepts the specified insert format and works with the clamping size 07 interface to ensure secure, repeatable seating. The 93° cutting angle and right-hand cutting orientation are optimised for internal turning cycles where clearance and chip flow matter, so setup time is reduced and cycle consistency is increased. Lightweight, compact design for reliable CNC integration At 0.08 kg the turning bar is lightweight yet sufficiently rigid for finishing tasks; reduced mass lowers inertial load during rapid spindle acceleration and handling. A 12 mm diameter profile and modest overall length make the tool suitable for confined internal operations and integration into automated turning cells where space is constrained. The compact construction supports efficient tool changes and helps maintain effective tool paths in multi-station setups. Speak with Metav Werkzeuge for tailored application advice and fast supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss fitting the S10J SDUCR boring bar into current turning processes. Technical data SKU: K120TM Manufacturer: Teknik Makina ISO designation: S10J SDUCR Type: SDUC for DC-- Indexable Inserts Core specifications Shank diameter: 10 mm Diameter: 12 mm Cutting height: 20 mm Overall length: 110 mm Weight: 0.08 kg Cutting angle: 93° Cutting direction: right Design & features Suitable for DC-- 0702 indexable inserts Clamping holder designation: 07 Right-hand toolholder Compact boring bar for internal turning FAQ Which insert type fits this boring bar? The bar is made for DC--0702 indexable inserts; the SDUC-style pocket accepts that insert family for straightforward replacement. What are the key dimensions to check for fitting? Refer to the 10 mm shank, 12 mm diameter and 110 mm overall length when planning toolholders and turret space. Is the clamping interface standard? Yes — the holder uses the clamping size 07 designation to ensure secure and repeatable insert seating. What cutting direction and angle does the tool use? The tool is configured for right-hand cutting with a 93° cutting angle, suited to standard internal turning operations. Which workshop environments benefit most from this bar? Precision toolrooms and production turning cells that require compact, repeatable insert tooling will benefit from this compact boring bar. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact combination of 120° cutting angle and a shank Ø 10 mm for steady internal boring and consistent chip control; the short overall length supports reduced overhang and improved stability. Order the boring bar directly via Metav Werkzeuge or ask our consultants if needed. S10J SDXCR Boring Bar — 120° cutting angle, shank Ø 10 mm (Teknik Makina) A S10J SDXCR boring bar engineered for precision internal profiling with DC-- series indexable inserts, suited to production and workshop environments where repeatability matters 120° cutting angle for stable cutting Shank Ø 10 mm for secure clamping Compatible with DC-- series indexable inserts Compact overall length 110 mm for less overhang Stable cutting geometry for reliable internal machining The bar's 120° cutting angle provides a balanced engagement that reduces radial load and helps to maintain concentricity during deep internal passes. With a shank Ø 10 mm and an external diameter of 12 mm, the design supports secure clamping in standard toolholders while the right-hand cutting configuration matches typical turning and boring cycles. This geometry translates into predictable tool behaviour and fewer rejects when reproducing bores and profiles on production lathes. Short overhang and lightweight design that improves cycle performance A compact overall length of 110 mm and a mass of only 0.08 kg reduce dynamic deflection and enable higher achievable feeds without compromising surface finish. The moderate cutting height of 25 mm ensures stable support of the indexable seat, which contributes to consistent tool life and repeatable results. In practical terms, shorter overhang reduces vibration, so machining times are more predictable and tool-change frequency can be optimised for lower lifecycle cost. Practical compatibility and workshop integration Designed for use with DC-- series indexable inserts, the holder integrates into existing turning and CNC setups with minimal adaptation. The ISO designation S10J SDXCR clarifies the holder family and mounting principle for procurement and toolroom documentation. Its compact footprint makes it suitable for confined workpieces and retrofit operations, while the right-hand orientation matches standard toolpaths in many workshop programmes, supporting efficient process planning. For Teknik Makina quality and Metav Werkzeuge’s reliable supply in Emmerich, request this SDXCR boring bar via Metav Werkzeuge for seamless procurement and concise technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: K469TM Manufacturer: Teknik Makina ISO designation: S10J SDXCR Series: SDXCR for DC-- indexable inserts Core measurements Shank diameter: 10 mm Overall length: 110 mm Diameter: 12 mm Cutting height: 25 mm Cutting angle: 120° Weight: 0.08 kg Features and compatibility Right-hand cutting direction Compatible with DC-- series indexable inserts For internal boring and profiling Compact design for limited overhang FAQ Which inserts fit this boring bar? The boring bar is designed for DC-- series indexable inserts; the SDXCR designation indicates the compatible insert family and the insert size should be matched to the holder geometry. Is the shank diameter suitable for standard toolholders? Yes, the shank Ø 10 mm is intended for secure clamping in common holders specified for small-diameter boring bars and guarantees stable seating. What machining direction does the bar support? This holder is configured for right-hand cutting, suitable for conventional internal turning directions on most lathes and CNC machines. How does the overall length affect performance? The 110 mm overall length reduces overhang compared with longer bars, lowering deflection and vibration for improved surface finish and dimensional repeatability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Secure machining in confined set-ups is achieved through the combination of ER11 clamping, compatibility with 11 IR indexable inserts and a compact 12 mm cutting diameter; the 10 mm shank supports stable, repeatable results. Order the boring bar directly via Metav Werkzeuge or consult our specialists for application guidance. Boring bar K360-2TM – STI for IR/ER indexable inserts, left-hand, 12 mm The boring bar K360-2TM is a left-hand tool holder designed for STI-type IR/ER indexable inserts, suited to precision turning and light internal boring tasks in small-part production Left-hand cutting for specialised set-ups Compatible with STI for IR/ER indexable inserts ER11 clamping for secure tool holding 12 mm cutting diameter, 10 mm shank diameter Achieve consistent accuracy with a rigid mounting system As a precision boring bar, the K360-2TM combines a 10 mm shank with a 12 mm cutting diameter to reduce deflection in small-diameter machining. The compact geometry and the ER11 interface deliver a secure connection between holder and spindle, minimising runout and vibration. This results in improved repeatability and a more uniform surface finish, which is particularly valuable when batch sizes require consistent tolerances. The practical effect is fewer rework cycles and more reliable process capability on small components. Save cycle time through built-in insert compatibility and left-hand orientation The tool is configured for left-hand cutting and accepts STI seats for IR/ER indexable inserts, notably the 11 IR size; this arrangement allows for rapid insert indexing rather than complex regrinding. Left-hand orientation permits cutting from the opposite direction without component reorientation on certain lathe setups, shortening handling time and reducing idle periods. The indexable-insert concept also lowers consumable costs because each insert edge is used in turn, extending the service life per insert and simplifying inventory management for common insert sizes. Compact form factor that integrates easily into existing tooling With an overall length of 110 mm and a low mass of 0.079 kg, the holder fits tight toolposts and constrained spindle noses while maintaining sufficient rigidity for light to medium finishing passes. The cutting height 20 mm is engineered to secure the insert at the correct rake and clearance, supporting stable chip formation. The ISO designation S10J STIL indicates compatibility with standard toolholder conventions, easing the introduction of the component into established tooling arrays and reducing set-up time during changeovers. For tailored advice or to place an order for the Teknik Makina K360-2TM boring bar, contact Metav Werkzeuge in Emmerich for local supply and application support: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich; +49 2822 7131930; info@metav-werkzeuge.com Technical data SKU: K360-2TM Manufacturer: Teknik Makina Designation: STI for IR/ER Indexable Inserts ISO designation: S10J STIL Numerical data Cutting diameter: 12 mm Shank diameter: 10 mm Cutting height: 20 mm Total length: 110 mm Weight: 0.079 kg Design & features Compatible insert size: 11 IR Clamping interface: ER11 Cutting direction: Left Application: STI for IR/ER indexable inserts FAQ Which insert size is compatible with this tool? The boring bar K360-2TM is designed for the 11 IR insert size and accepts STI-style pockets for IR/ER indexable inserts. What clamping system does the holder use? Clamping is by ER11, which provides secure retention and is suitable for the specified shank and cutting diameters of the K360-2TM. Is the tool suitable for right-hand turning as well? The holder is configured for left-hand cutting; reversing to right-hand cutting would require a different orientation or a right-hand specific holder. How does the ISO designation affect integration into a tooling system? The ISO code S10J STIL indicates standardised dimensions and form, enabling straightforward integration into existing toolholder inventories and simplifying set-up procedures. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact turning solution that combines a Ø12 mm cutting diameter, a 125 mm overall length and secure compatibility with CC-- 0602 indexable inserts; order the Bohrstange K106TM directly via Metav Werkzeuge or consult the Metav team for fitment and delivery advice. Bohrstange K106TM — SCLC for CC-- Indexable Inserts, right-hand, Ø12 mm The Bohrstange is a right-hand turning bar designed for SCLC holders and optimised for machining tasks with CC-- 0602 indexable inserts, suitable for general turning operations in industrial and workshop environments. Right-hand cutting direction Ø12 mm cutting diameter 125 mm overall length Compatible with CC-- 0602 inserts Predictable cutting geometry for consistent results The turning bar provides a clearly defined cutting geometry that supports repeatable machining cycles. The 95° cutting angle offers clearance and chip flow advantages in many turning operations, while the modest shaft diameter 16 mm and 25 mm cutting height deliver stability at the tool tip. These measurable parameters translate into more predictable tool life and reduced rework, which is essential in production environments where process reliability matters. Fast changeover and secure clamping — fewer interruptions Designed with an ISO-style holder designation S12K SCLCR and a clamp code 06, the bar enables quick insert changes and secure clamping of CC-- 0602 indexable inserts. Indexable inserts reduce setup time because only the insert needs replacing when worn, not the entire tool; this lowers downtime and simplifies spare-part logistics. The combination of standardised holder geometry and insert compatibility supports efficient tool management on the shop floor. Compact design that suits tight machining envelopes At 125 mm overall length and weighing just 0.12 kg, the bar fits applications with constrained access without compromising control. The Ø12 mm cutting diameter balances rigidity and reach, making the tool suitable for fine turning and light to medium roughing where dimensional accuracy is required. The light mass also eases handling during tool changes and reduces stress on turret systems, contributing to smoother indexing and longer life for both tool and machine components. Practical benefits for procurement and workshop planning Choosing a standardised bar with known dimensions and ISO identification simplifies procurement and inventory. The clear numeric specifications — diameter, length, shaft size and cutting height — facilitate planning for tool holders and turret setups. Metav’s offering makes it straightforward to match the bar to existing SCLC holders and CC-- 0602 inserts, reducing the risk of incompatible purchases and saving time during installation. Contact Metav Werkzeuge to confirm compatibility of the Teknik Makina K106TM — the SCLC turning bar optimised for CC-- 0602 inserts — and secure reliable supply and technical advice directly from our Emmerich team Technical Data SKU: K106TM Manufacturer: Teknik Cutting Tools ISO designation: S12K SCLCR Type: SCLC for CC-- Indexable Inserts Brand: Teknik Makina Core dimensions Cutting diameter: 12 mm Overall length: 125 mm Shaft diameter: 16 mm Cutting height: 25 mm Weight: 0.12 kg Cutting angle: 95° Cutting direction: Right Compatibility & features Compatible inserts: CC-- 0602 Clamp designation: 06 Designed for SCLC holders Indexable-insert system FAQ Which insert size fits this turning bar? The bar is specified for CC-- 0602 indexable inserts; this compatibility ensures direct fitment with the designated insert geometry when used with SCLC holders. What does the ISO code S12K SCLCR indicate? The ISO designation S12K SCLCR describes the holder form factor, shank size and insert orientation, enabling correct matching of the turning bar to tool posts and turret stations. Is the K106TM suitable for heavy roughing? The K106TM (Teknik Makina turning bar, SKU K106TM) is compact and best suited to light to medium turning operations where accuracy and access are priorities rather than high-material-removal-rate roughing. How does the 95° cutting angle affect machining? A 95° cutting angle provides improved clearance and chip evacuation in many turning tasks, which can help maintain surface finish and reduce vibration when the correct feed and speed are used. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of rigid shank design, broad insert compatibility and a 95° cutting angle for reliable internal turning; order directly via Metav Werkzeuge or consult the specialists for application advice. S12K SCLCR boring bar — SCLC for CC-- indexable inserts, 95° right-hand The S12K SCLCR boring bar is a compact internal turning tool designed for right-hand operations and compatible with CC-- 09T3 indexable inserts, suitable for precision CNC and turning centres. S12K SCLCR ISO shank design Compatible with CC-- 09T3 indexable inserts Right-hand 95° cutting angle 12 mm cutting diameter, 16 mm shank Stable cuts from a rigid shank for consistent part quality The S12K SCLCR holder is engineered with a 16 mm shank and a compact overall length to reduce overhang, delivering reduced vibration and improved surface finish during internal turning operations. The combination of a solid shank and precise seating for the insert provides stable cutting conditions, which translates into longer tool life and fewer reworks. For production environments where repeatability is critical, the holder’s geometry supports predictable chip formation and steady tool engagement. Reduced tooling cost through standardised insert use Compatibility with CC-- 09T3 indexable inserts allows the use of widely available insert grades and chipbreakers, lowering tooling inventory complexity. Using indexable inserts means only the cutting tip requires periodic replacement, not the entire tool, which improves cost-efficiency for series production. The insert pocket and clamping geometry ensure secure seating, enabling quick insert changes and minimised machine downtime for higher overall equipment effectiveness. Efficient set-up and reliable cutting behaviour for right-hand machining A 95° cutting angle combined with right-hand orientation provides positive engagement and dependable chip flow in typical internal turning tasks. The tool’s 12 mm cutting diameter and cutting height 24 mm give a practical balance between rigidity and access, while a modest weight of 0.271 kg makes handling and toolpost changes straightforward. The industry-standard ISO designation supports compatibility with common toolholders, so integration into existing fixtures and CNC programmes is straightforward and predictable. For technical recommendations and to source the S12K SCLCR boring bar from Teknik Cutting Tools, contact Metav Werkzeuge in Emmerich for tailored advice and fast delivery — eMail: info@metav-werkzeuge.com · Tel: +49 2822 7131930 Technical Data Article number: K107-1TM ISO designation: S12K SCLCR Brand: Teknik Cutting Tools Numbers / Core technical data Cutting diameter: 12 mm Shank diameter: 16 mm Overall length: 125 mm Cutting height: 24 mm Cutting angle: 95° Weight: 0.271 kg Special features / Versions Compatible inserts: CC-- 09T3 Cutting direction: right-hand Application: internal turning / boring Holder style: SCLC for CC-- indexable inserts FAQ What insert type is required for this boring bar? The holder accepts CC-- 09T3 indexable inserts, which are commonly available and compatible with the S12K SCLCR boring bar (SKU K107-1TM). Is the tool suitable for standard CNC lathes? Yes, the S12K SCLCR holder is designed for standard turning centres and fits common toolholders thanks to its ISO shank form. Which cutting direction does the holder use? This tool is a right-hand boring bar with a 95° cutting angle, optimised for conventional right-handed internal turning operations. How does the 95° angle affect machining? The 95° cutting angle promotes positive engagement and improved chip control during internal turning, leading to more consistent surface finish and tool life. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

High radial stiffness combined with compatibility for CC-- 0602 indexable inserts and a compact 12 mm body ensures efficient internal machining with consistent repeatability; order the boring bar directly via Metav Werkzeuge or ask our consultants if needed. Boring bar SCLC for CC-- Indexable Inserts — S12Q SCLCR holder, right-hand cutting (Teknik Makina) Boring bar SCLC for CC-- Indexable Inserts for precise internal turning and insert-based cutting, designed for compact bores and stable toolholding Right-hand cutting for stable machining ISO S12Q SCLCR designation Compatible with CC-- 0602 inserts 12 mm diameter, 180 mm overall length Precision and stability for consistent internal finishes The compact boring bar is engineered to deliver stable machining in confined bores. Its right-hand cutting geometry and a 95° cutting angle reduce radial forces and chatter, which benefits cycle-time consistency and surface finish quality. The combination of a short, rigid body and accurate insert seating leads to fewer rejected parts and less rework, supporting productivity targets in small-bore applications. Where repeatability matters, the design prioritises secure clamping and minimal deflection. Engineered dimensions that support secure clamping and reach Key dimensions translate directly into operational advantages: a 12 mm diameter suited to tight internal bores, a shaft diameter of 16 mm for robust clamping in the toolholder, and an overall length of 180 mm to reach moderate depths without sacrificing stiffness. The 25 mm cutting height ensures correct insert support and axial positioning, while the ISO S12Q SCLCR designation defines the holder form for compatibility with standard tool systems. These measurable specifications simplify set-up decisions and reduce the need for custom adaptations. Efficient insert system and practical workshop benefits Compatibility with CC-- 0602 indexable inserts lets workshops standardise on a small, economical insert size that is widely stocked. The SCLC holder form supports quick insert changes and predictable cutting behaviour, reducing downtime during tool changes. For shops focused on throughput, the tool’s modest weight (approximately 0.17 kg) and conventional holder geometry make it straightforward to integrate into existing tool inventories without special fixtures. The result is a practical balance of economy, serviceability and machining performance. For technical advice on integrating the Teknik Cutting Tools S12Q SCLCR boring bar into production or to place an order via Metav Werkzeuge, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: K107TM Manufacturer: Teknik Makina ISO designation: S12Q SCLCR Model name: SCLC for CC-- Indexable Inserts Cutting direction: right Facts Diameter: 12 mm Shaft diameter: 16 mm Cutting height: 25 mm Overall length: 180 mm Weight: 0.17 kg Cutting angle: 95° Special features Compatible with CC-- 0602 indexable inserts Holder form: SCLC (SCLCR) Designed for internal boring with indexable inserts Compact, rigid design for small-bore applications FAQ Which inserts fit this boring bar? The boring bar accepts CC-- 0602 indexable inserts; use the matching SCLC insert geometry for correct seating and performance. Is the cutting direction right‑hand only? Yes, the tool features a right-hand cutting configuration suited to standard clockwise spindle rotations for conventional internal turning. What are the key dimensions for setup? The tool has a 12 mm body diameter, 16 mm shaft diameter and 180 mm overall length; these values assist with holder selection and reach estimation. What ISO holder designation does the tool use? The holder is specified as S12Q SCLCR, which defines the clamping style and insert orientation for compatibility with established toolholders. How heavy is the tool for fixture planning? The boring bar weighs approximately 0.17 kg, allowing straightforward handling and minimal additional inertia in tool assemblies. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

A compact, right-hand clamping tool holder offering secure seating for CCMT 09T3 inserts, a 95° cutting angle and a slim 12 mm head for close turning operations; ideal where repeatable clamp force and quick insert changes are required. Order the tool holder directly via Metav Werkzeuge or ask our consultants if needed Klemmhalter SCLC for CCMT Indexable Inserts — SCLCR 1212 tool holder (Teknik Makina) A Klemmhalter SCLC for CCMT Indexable Inserts intended for right-hand turning, designed to accept CCMT 09T3 indexable inserts for medium to fine turning applications Compatible with CCMT 09T3 inserts ISO SCLCR 1212 holder type 12 mm head width and height 110 mm overall length Precise compatibility that reduces setup time The clamping solution is designed for repeatability: the SCLCR 1212 configuration guarantees consistent seat geometry for CCMT 09T3 inserts, which simplifies insert replacement and reduces downtime. With a slim head profile of 12 mm and an overall length of 110 mm, the holder allows confined tool positions and improved access to shoulders and grooves. The right-hand orientation and a 95° cutting angle deliver predictable chip flow and stable cutting forces, supporting efficient machining programmes in small-batch and serial turning. Robust clamping and predictable process stability Manufactured for stability on the lathe, this tool holder combines a compact design with a reliable clamping interface that keeps the insert fixed under varying loads. The modest mass (approx. 0.144 kg) contributes to low overhang inertia while maintaining sufficient rigidity for finishing and semi-finishing passes. The holder is specified with the shank designation J09-F, ensuring compatibility with commonly used boring-bar systems and facilitating straightforward integration into existing tool posts. Practical benefits for workshop efficiency By standardising on a holder that fits the widely used CCMT 09T3 grade, tool change routines are simplified and tool-store complexity is reduced. The concise head dimensions and the 95° incident angle support close-proximity turning and allow economical approach angles without compromising edge life. The straightforward design also makes visual inspection and clamp-screw access fast, helping maintain throughput during shift changes and rapid order fluctuations. Where predictable results and easy handling are priorities, this holder contributes to smoother production flows and less rework. For a reliable Teknik Makina clamping solution and fast delivery from Metav Werkzeuge in Emmerich, request the D426TM holder specification or technical advice by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: D426TM Manufacturer: Teknik Makina Article designation: SCLC for CCMT Indexable Inserts ISO designation: SCLCR 1212 For inserts: CCMT 09T3 Cutting direction: right Overall length: 110 mm Head width: 12 mm Head height: 12 mm Weight: 0.144 kg Cutting angle: 95° Shank designation: J09-F Facts Overall length: 110 mm Head width: 12 mm Head height: 12 mm Weight: 0.144 kg Cutting angle: 95° SKU: D426TM Special features Compatible with CCMT 09T3 inserts ISO SCLCR 1212 holder type Right-hand turning orientation Shank type J09-F Brand: Teknik Makina FAQ Which insert format fits this holder? The holder accepts CCMT 09T3 indexable inserts; the seat geometry matches the CCMT profile to ensure correct clamping and repeatable positioning. Is this holder suitable for finishing or roughing operations? With a 95° cutting angle and a compact 12 mm head, the holder is best suited to finishing and semi-finishing where access and accuracy are required rather than heavy roughing. What is the overall length and how does that affect tool overhang? The overall length is 110 mm, which helps to limit overhang and reduce vibration compared with longer holders, improving stability for fine turning passes. How is the orientation specified? This is a right-hand holder for conventional right-hand turning applications; the designation SCLCR 1212 reflects the ISO geometry and turning side Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, precision‑engineered screw‑in milling cutter that delivers secure clamping and reliable chip control in restricted spaces; its 12 mm body and M6 thread ensure compatibility with standard small‑diameter setups while the Torx fastening and three cutting edges reduce downtime. Order directly via Metav Werkzeuge or request bespoke advice from our consultants. VT221TM Screw-in Milling Cutter — 12 mm, M6 thread, Teknik Makina VT221TM screw‑in milling cutter for APMT 0602 indexable inserts, optimised for compact machining and quick insert changes Compact 12 mm diameter for tight spaces M6 thread with 15 mm thread height Secure Torx fastening M1.8 x 4.1, T6 Three cutting edges for stable chip control Stable clamping for consistent machining results The solid design with an M6 thread and 15 mm thread height gives the tool reliable seating in small adaptors and compact spindles. With a 12 mm body and total length of 40 mm, the holder minimises overhang and reduces vibration, which supports a steady surface finish and longer insert life. The supplied Torx screw specification (M1.8 x 4.1) and T6 key interface provide a repeatable, maintenance‑friendly fastening method that helps to shorten tool change cycles and improve uptime. Economical insert strategy for efficient maintenance Designed to accept APMT 0602 indexable inserts, the cutter enables quick insert swaps and straightforward wear management. Compatibility with Korloy‑type inserts ensures a broad choice of grades and geometries for different materials and cutting conditions. The indexable approach reduces tooling costs over time because worn cutting edges are replaced rather than the whole cutter body, combining operational economy with predictable process control. Process benefits from an optimised cutting geometry Equipped with three cutting edges, the design balances chip formation and radial forces for secure cutting in interrupted and continuous milling operations. The lightweight construction (approx. 0.02 kg) lowers centrifugal stresses at higher speeds and helps maintain toolpath accuracy. These characteristics translate into dependable cycle times and repeatable part quality, making the holder suitable for small‑batch production or finishing passes where stability matters. Practical handling and serviceability on the shop floor The assembly is engineered for straightforward service: the Torx screw can be accessed with a common T6 wrench, and insert replacement is rapid thanks to the screw‑in clamp concept. The compact dimensions also make storage and logistics simpler, while the clear specification of fastening and thread details aids purchasing and inventory management. The VT221TM is produced by Teknik Makina, reflecting industrial manufacturing standards for precision holders. For reliable supply of the Teknik Makina VT221TM screw‑in milling cutter and expert advice on insert selection or application, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: VT221TM Manufacturer: Teknik Makina SKU: VT221TM Dimensions & measures Diameter: 12 mm Total length: 40 mm Thread: M6 Thread height: 15 mm Weight: 0.02 kg Cutting edges: 3 Features & compatibility For APMT 0602 indexable inserts Compatible insert manufacturer: Korloy Torx screw: M1.8 x 4.1 Torx key size: T6 Screw‑in holder design FAQ Which inserts fit this holder? The holder is specified for APMT 0602 indexable inserts and is compatible with Korloy‑type APMT inserts. What fastening is used to secure the insert? Insert clamping is achieved with a Torx screw (listed as M1.8 x 4.1) that is tightened with a T6 key. What are the key dimensions to check for machine compatibility? Important dimensions are 12 mm diameter, 40 mm overall length and an M6 thread with 15 mm thread height. Who manufactures this screw‑in milling cutter? This product is manufactured by Teknik Makina and is distributed through Metav Werkzeuge under the SKU VT221TM. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, ISO‑specified holder that combines rigid clamping with fast insert changes and consistent geometry for stable turning. Order the toolholder directly via Metav Werkzeuge or consult our specialists for application advice. Klemmhalter (SDJC) — SDJCR 1212 right-hand toolholder for DCMT 0702 inserts by Teknik Makina The Klemmhalter (SDJC) is a right-hand turning toolholder designed for external machining with DCMT 0702 indexable inserts, offering a compact 12×12 mm shank and secure Torx clamping. Compact SDJCR 1212 holder, 12×12 mm Right-hand configuration for external turning Accepts DCMT 0702 indexable inserts Torx clamping screw M2.5x5.5 (T8) Consistent clamping for repeatable turning results The holder's ISO designation SDJCR 1212 and 12×12 mm shank deliver a predictable and rigid connection between toolpost and insert, reducing vibration and improving surface finish in production. The clamping system uses a M2.5x5.5 screw operated with a T8 Torx key, which secures the insert firmly and keeps set‑up times short. This fixed geometry supports reproducible positioning of the cutting edge so batch runs maintain tolerance without frequent adjustments. Faster insert changes and optimised cutting posture Compatibility with DCMT 0702 indexable inserts simplifies tooling logistics and allows quick insert replacement without re‑setting the holder. The specified 15 mm cutting height guarantees correct insert alignment for consistent tool engagement, while the 93° cutting angle provides the necessary clearance for typical external turning tasks. Designed as a right‑hand holder, it is optimised for conventional lathe feed directions and delivers reliable chip flow and tool life when matched with appropriate insert grades. Compact reach and straightforward inventory management With an overall length of 125 mm and a cutting‑head width of 16 mm, this holder balances reach and rigidity for confined setups and general turning operations. At approximately 0.13 kg, it is easy to handle during tool changes yet substantial enough to dampen chatter. The holder is identified by SKU D220-1TM and the shank designation K07, simplifying ordering and stock control for workshops and production lines. The robust, standardised specification supports a lean toolroom approach and predictable maintenance intervals. For reliable turning results with Teknik Makina toolholders and tailored tooling recommendations, contact Metav Werkzeuge in Emmerich — eMail: info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: D220-1TM Manufacturer: Teknik Makina ISO designation: SDJCR 1212 Shank designation: K07 Compatible inserts: DCMT 0702 Data Shank width: 12 mm Shank height: 12 mm Cutting head width: 16 mm Cutting height: 15 mm Overall height: 12 mm Overall length: 125 mm Weight: 0.13 kg Cutting angle: 93° Special features Right-hand toolholder Accepts DCMT 0702 indexable inserts Clamping screw M2.5x5.5 (Torx T8) ISO: SDJCR 1212 SKU D220-1TM Manufacturer: Teknik Makina FAQ Which insert size fits this holder? The holder is designed for DCMT 0702 indexable inserts; matching inserts ensure correct cutting geometry and clamping. What is the shank dimension and ISO code? Shank size is 12×12 mm and the holder is specified as SDJCR 1212 for straightforward identification. Which clamping screw and key are required? Clamping uses a M2.5x5.5 screw and a T8 Torx key for secure fastening. Is this holder for left‑hand or right‑hand turning? This is a right‑hand toolholder suitable for standard external turning feeds. How long is the holder and what is the cutting height? Overall length is 125 mm and the cutting height is 15 mm, providing correct insert alignment and reach. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, coolant-ready toolholder that secures DCMT 11T3 inserts reliably while delivering stable right-hand turning performance; order the AP571TM directly via Metav Werkzeuge or consult our specialists for application advice. Clamping holder AP571TM — SDJC toolholder for DCMT 11T3 with internal coolant The Clamping holder AP571TM is a right-hand SDJC toolholder designed for use with DCMT 11T3 indexable inserts, offering internal coolant supply and a compact 12 × 12 mm cutting head for stable precision turning. SDJCR 1212 ISO designation Compatible with DCMT 11T3 inserts Internal coolant for improved chip evacuation Robust 12 x 12 mm cutting head dimensions Secure clamping that keeps cutting geometry stable The AP571TM is engineered to maintain consistent cutting geometry during interrupted cuts and heavy finishing passes. The SDJCR 1212 designation corresponds to a proven clamping form that fits standard turning toolholders, while the M3.5x8.5 Torx screw and T15 key provide a secure, repeatable clamp force. This mechanical reliability minimises insert movement and run-out, translating into predictable tool life and a constant surface finish. For workshops aiming to reduce rework and tool-change downtime, this holder supports efficient shopfloor processes through dependable retention and straightforward maintenance. Coolant-fed design for better chip control and tool life Integrated supply channels allow coolant to reach the cutting zone directly, supporting effective chip control and heat dissipation. The internal coolant capability reduces edge temperature and helps prevent built-up edge on the insert, which in turn extends insert life and preserves component tolerances. In applications where surface finish and tool longevity affect production economics, this coolant-ready configuration offers a measurable improvement in machining stability and process reproducibility, especially on medium–heavy duty turning where thermal management matters. Compact dimensions for rigid performance in confined setups With a cutting-head footprint of 12 mm by 12 mm, a cutting height of 32 mm and an overall length of 110 mm, the holder combines rigidity with access to tighter fixtures. The modest mass (0.11 kg) and a 93° cutting angle produce low overhang and reduced vibration, improving chip formation and dimensional control. The right-hand cutting direction specification makes the holder suitable for standard right-hand lathes and CNC turning centres. These compact geometries are particularly beneficial for secondary operations and when tool clearance is limited, enabling more reliable finishes without sacrificing stability. Easy integration and standardised tooling for efficient workflows The toolholder accepts common DCMT 11T3 indexable inserts and mounts on a J11-F-IC shank, simplifying inventory management across tooling systems. The ISO-style designation and conventional fixing hardware mean familiar handling for technicians and fast replacement during tool changes. Standardisation reduces the number of specialised parts required in a busy workshop and streamlines procurement, maintenance and operator training — factors that support continuous, predictable production rhythms. For coolant-ready, compact turning solutions from Teknik Makina, contact Metav Werkzeuge in Emmerich for procurement and technical advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: AP571TM Manufacturer: Teknik Makina Article designation: SDJC for DCMT indexable inserts (SDJCR 1212) Facts Cutting-head width: 12 mm Holder height: 12 mm Cutting-head width (alternate): 12 mm Cutting height: 32 mm Overall length: 110 mm Overall height: 12 mm Weight: 0.11 kg Cutting angle: 93° Cutting direction: right-hand Torx screw: M3.5x8.5 Torx key: T15 Shank designation: J11-F-IC Special features Internal coolant: yes Compatible inserts: DCMT 11T3 ISO designation: SDJCR 1212 FAQ What insert type fits this holder? The holder accepts DCMT 11T3 indexable inserts; the AP571TM is specified for this insert form and secures it using the SDJCR-style clamp. Is the holder suitable for coolant-fed machining? Yes. The AP571TM features internal coolant channels to deliver cutting fluid to the insert interface for improved chip evacuation and thermal control. Which cutting direction is supported? This toolholder is configured for right-hand cutting operations and is intended for installation on right-handed turning setups. What are the key mounting and fixing details? Fixing is provided via an M3.5x8.5 Torx screw tightened with a T15 key; shank designation for mounting is J11-F-IC. How does the compact design affect performance? The 12 × 12 mm cutting-head dimensions and 110 mm overall length reduce overhang, increase rigidity and help to lower vibration, resulting in more consistent finishes and longer tool life. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable clamping for DCMT 0702 inserts combined with a compact 12 × 12 mm cross section ensures stable left‑hand turning with minimal vibration; the 125 mm overall length provides extended reach while the standard Torx M2.5 × 5.5 clamp allows quick insert changes — order via Metav Werkzeuge or consult Metav's technical team if guidance is required. Klemmhalter SDJC for DCMT indexable inserts, left‑hand, 12 × 12 mm (Teknik Makina) Klemmhalter SDJC for DCMT indexable inserts is a left‑hand turning toolholder designed for external turning with DCMT 0702 inserts, offering a compact 12 × 12 mm profile for confined set‑ups. For DCMT 0702 inserts, left‑hand cutting Compact 12 × 12 mm toolholder cross section 125 mm overall length for good reach Torx clamp screw M2.5 × 5.5, T8 key required Precision clamping for repeatable turning results The SDJC clamping geometry is engineered to secure DCMT 0702 inserts with consistent pressure, reducing micro‑movement during interrupted cuts. With a compact 12 × 12 mm cross section and ISO designation SDJCL 1212, the holder provides a stable platform that minimises deflection in light and medium turning applications. The clamping mechanism uses a Torx screw for direct, reliable locking; this standard fastening reduces tool change time and simplifies maintenance while preserving repeatability across batches. Geometry tuned for consistent chip flow and durable edges An approach angle of 93° and a left‑hand orientation create a geometry that separates radial and axial cutting forces, promoting predictable chip flow and more even insert wear. The defined cutting height 15 mm aligns the insert correctly with the tool centre, which supports surface finish stability and reduces the need for corrective passes. For setups that prioritise dimensional control and tool life, the combination of holder angle and insert form delivers measurable process reliability without complex adjustments. Serviceable, workshop‑ready design to reduce downtime Designed for practical workshop use, the holder measures 125 mm overall and weighs 0.14 kg, offering a balance between reach and low rotating mass. The clamp screw specification M2.5 × 5.5 (Torx) and the required T8 key are industry standards, ensuring replacement parts are readily available. Mounting compatibility with bar designation K07‑F and the compact head width of 12 mm make the unit suitable for retrofit into existing toolpost arrangements. Clear, standard features enable quick insert changes and predictable servicing intervals, reducing machine downtime and improving throughput. For application‑specific selection or batch supply of the Teknik Makina SDJC toolholder, contact Metav Werkzeuge's specialists in Emmerich for immediate advice and delivery from stock — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: D154TM Manufacturer: Teknik Makina Article designation: SDJC for DCMT Indexable Inserts ISO designation: SDJCL 1212 Facts Cross section: 12 × 12 mm Head width: 12 mm Cutting height: 15 mm Overall length: 125 mm Weight: 0.14 kg Cutting angle: 93° Cutting direction: left Special features Compatible with DCMT 0702 indexable inserts Clamp screw: M2.5 × 5.5 (Torx) Torx key size: T8 Boring bar designation: K07‑F FAQ Which inserts fit this holder? The holder is specified for DCMT 0702 indexable inserts; the SDJC geometry secures this insert form for reliable external turning. Is the holder for left‑hand or right‑hand turning? This toolholder is a left‑hand version intended for left‑hand turning operations and is identified accordingly in the technical data. What fastener and key are required for the clamp? Clamping uses a Torx screw sized M2.5 × 5.5 and requires a T8 key for safe insertion and removal. What are the critical dimensions for fitting into a toolpost? Key dimensions: cross section 12 × 12 mm, overall length 125 mm, head width 12 mm; ISO designation SDJCL 1212 guides mounting compatibility. How does the 93° cutting angle influence machining? The 93° approach angle shifts the force components to improve stability and chip evacuation, which helps maintain surface quality and extend insert life. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah. 422 Nolu Sokak No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise left-hand geometry and secure clamping for reliable turning operations; the holder accepts DCMT 0702 inserts and uses a Torx M2.5x5.5 clamping screw for consistent seating. Order the toolholder directly via Metav Werkzeuge or consult our specialists for application advice. SDJC clamp holder for DCMT indexable inserts — left-hand toolholder by Teknik Makina The SDJC clamp holder for DCMT indexable inserts is a left-hand turning toolholder engineered for secure retention of DCMT 0702 inserts in longitudinal and profiling operations. Left-hand design for longitudinal turning Compatible with DCMT 0702 inserts Torx M2.5x5.5 clamping screw, T8 SDJCL 1212 profile, 12 × 12 mm Precision clamping that reduces setup variability The SDJC-style holder delivers secure clamping of DCMT 0702 indexable inserts through a robust Torx M2.5x5.5 screw and a machined pocket that maintains insert seating under cutting loads. This stability reduces rework and minimises vibration, which in turn improves surface finish and extends insert life. For workshops seeking predictable cycle times, the controlled interface between holder and insert translates directly into fewer interventions and steadier part quality. Geometry designed for reliable left-hand turning performance With a left-hand cutting orientation and a defined cutting angle of 93°, the toolholder is tailored for negative-rake DCMT inserts used in facing and longitudinal turning on lathes. The SDJCL 1212 profile (12 × 12 mm) ensures compatibility with standard toolposts and provides a compact footprint while retaining sufficient overhang resistance. For engineers unfamiliar with insert geometry: the 93° angle positions the cutting edge to balance tool life and chip flow, making it suitable for a wide range of steels and general workshop applications. Compact dimensions and serviceable hardware for straightforward maintenance A total length of 125 mm and a cutting-head width of 16 mm give the holder a practical reach without excessive overhang, helping to maintain rigidity in confined setups. The clamping screw uses a common T8 Torx key, which simplifies maintenance and replacement. Because the design favours standardised fixings and dimensions, spare parts management is simplified and downtime is reduced — practical advantages for production environments where tool change frequency impacts throughput. For dependable left-hand turning choose the SDJC clamp holder from Teknik Makina — contact Metav Werkzeuge for supply from Emmerich or request tailored application advice at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical Data SKU: D360-1TM Brand: Teknik Makina ISO designation: SDJCL 1212 Compatible inserts: DCMT 0702 Cutting direction: left Total length: 125 mm Overall height: 12 mm Holder width: 12 mm Cutting head width: 16 mm Cutting height: 15 mm Cutting angle: 93° Clamping screw: M2.5x5.5 Torx T8 Weight: 0.13 kg Facts Total length: 125 mm Holder width: 12 mm Overall height: 12 mm Cutting head width: 16 mm Cutting height: 15 mm Cutting angle: 93° Weight: 0.13 kg Clamping screw: M2.5x5.5 Special features SDJCL 1212 profile Compatible with DCMT 0702 indexable inserts Left-hand turning orientation Torx clamping screw M2.5x5.5, T8 key required Compact, rigid form for reduced vibration FAQ What insert size does this holder accept? The holder accepts DCMT 0702 indexable inserts; the pocket and clamping geometry are matched to that insert size. Is the holder suitable for left-hand turning only? Yes, the tool is designed with a left-hand cutting orientation and is intended for left-hand turning applications. What are the mounting dimensions of the holder? The holder uses an SDJCL 1212 profile with a holder width and height of 12 mm and an overall length of 125 mm. Which screw and key are required for clamping the insert? Clamping is performed with an M2.5x5.5 Torx screw; a T8 Torx key is the correct tool for tightening. How does the 93° cutting angle affect machining? A 93° cutting angle positions the insert to balance cutting forces and chip evacuation, offering versatile performance across common materials and promoting stable cutting with good surface finish. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com