Gibt es einen Hahn und Kolb Online Shop?

Combine the robust cutting performance of a 100 mm diameter head with the precision of RPMT 1606 indexable inserts and integrated internal coolant for consistent cycle times and improved tool life; order the face milling cutter directly via Metav Werkzeuge or request advice from our consultants if required. Rundplattenfräser – face milling cutter, 100 mm diameter, internal coolant (Teknik Makina) A Rundplattenfräser engineered for face milling with RPMT 1606 indexable inserts, offering stable material removal and reliable coolant delivery for demanding production and finishing operations 100 mm diameter for broad material contact Integrated internal coolant for improved cooling Seven cutting edges for steady material removal Compatible with Korloy RPMT 1606 inserts Faster material removal with consistent surface finish The combination of a 100 mm diameter cutting head and 7 cutting edges ensures efficient engagement with the workpiece, reducing cycle times while maintaining surface quality. Using RPMT 1606 indexable inserts provides the flexibility to rotate or replace worn edges quickly, which minimises downtime and keeps machining schedules predictable. Indexable inserts separate the cutting edge from the body of the tool, meaning blunt edges are exchanged rather than the entire cutter—this lowers consumable costs and streamlines maintenance in volume production environments. Controlled cooling at the cutting zone for longer life Built-in internal coolant channels direct fluid closer to the cutting interface, improving heat removal and chip control compared with external flood cooling alone. This targeted coolant delivery reduces thermal stress on the insert and the tool body, leading to a longer service life and fewer unscheduled tool changes. Fastening integrity is ensured by M5x12 Torx screws with a T20 drive, which provide secure insert clamping and repeatable seat seating; this mechanical stability supports consistent cutting forces and dimensionally reliable components. Designed for straightforward integration into production With an overall length of 55 mm and a compact mass, the milling head slots easily into existing toolsetups while delivering the rigidity required for face milling operations. The cutter’s construction supports compatibility with Korloy RPMT 1606 inserts, simplifying procurement and stocking. Supplied under the Teknik Makina range, the tool benefits from a clear part identity and consistent manufacturing standards, enabling buyers to plan inventory and replacement strategies with confidence and to reduce supplier complexity across the workshop. Contact Metav Werkzeuge for tailored application advice on Teknik Makina face milling cutters and to discuss delivery options or technical specifications via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T719-1TM Name: 100 mm face milling cutter for RPMT 1606 with internal coolant Manufacturer: Teknik Makina EClass: 21180902 Core dimensions Diameter: 100 mm Overall length: 55 mm Weight: 0.584 kg Cutting edges: 7 Special features Internal coolant Compatible inserts: RPMT 1606 Compatible insert manufacturer: Korloy Torx key: T20 Torx screw: M5x12 FAQ Which indexable inserts fit this cutter? The Rundplattenfräser is designed for RPMT 1606 indexable inserts; Korloy inserts in this designation are compatible and provide the correct seat geometry for secure clamping. Does the internal coolant require special machine fittings? Internal coolant delivery is supported when the machine spindle or holder provides a coolant supply; the cutter’s internal channels guide fluid to the cutting zone for improved heat and chip control. How are the inserts secured and maintained? Inserts are fastened with M5x12 Torx screws using a T20 drive; secure torque and regular seat inspection ensure repeatable clamping and consistent machining performance. Is this cutter suitable for general face milling and finishing? Yes—the combination of a 100 mm diameter head, multiple cutting edges and internal coolant makes the milling head suitable for both material removal and finishing tasks where stable cuts and surface quality are important. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from precise, repeatable face milling with a compact tool head that combines a Ø100 mm cutting diameter, 45° cutting angle and compatibility with ONMX 0806 indexable inserts for consistent surface quality. Order the face milling head directly via Metav Werkzeuge or consult our specialists for integration advice. Face milling head for ONMX 0806 indexable inserts, Ø100 mm, 45° cutting angle – Teknik Makina A robust face milling head engineered for finishing and light face-cutting applications using ONMX 0806 indexable inserts. Ø100 mm cutting diameter 45° cutting angle for versatile cutting Compatible with ONMX 0806 inserts Ø32 mm tool shank Torx M5x12 clamping screw Improved surface results with standardised ONMX 0806 inserts The face milling head delivers consistent finish quality by using industry-standard ONMX 0806 indexable inserts. The combination of a 45° cutting angle and a substantial Ø100 mm diameter enables balanced chip formation and reduced cutting forces, which supports smoother surfaces on a variety of workpieces. With 7 cutting edges distributed around the head, the cutter maintains productive engagement while helping to extend individual insert life; this yields predictable machining results and reduces rework in serial production. Fast maintenance and secure clamping to reduce downtime Clamping and servicing are engineered for speed and repeatability: the head uses a Torx M5x12 clamping screw tightened with a T20 key, allowing quick insert changes and reliable retention under machining loads. The Ø32 mm shank and compact overall length 50 mm make the unit straightforward to mount in standard toolholders, while the measured mass (1.067 kg) ensures stable running without excessive tool overhang. These attributes together minimise setup time and support continuous operation in busy workshops and CNC cells. Broad compatibility for flexible production workflows Designed for compatibility with insert lines from ISCAR, Korloy, LMN and YG‑1, the head suits procurement strategies that favour readily available cutting parts and cross-brand interchangeability. The modular concept supports straightforward replacement of worn inserts and adapts well to mixed-machine fleets. For production planners and toolroom managers, the design delivers a pragmatic balance of availability, maintainability and machining performance that helps streamline tooling inventories and shorten lead times. For specific technical integration, tooling recommendations or to order the Teknik Cutting Tools face milling head (SKU T784TM), contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: T784TM Designation: Face milling head for ONMX 0806 indexable inserts Brand: Teknik Makina Facts Diameter: Ø100 mm Shank diameter: Ø32 mm Overall length: 50 mm Weight: 1.067 kg Cutting angle: 45° Cutting edges: 7 Clamping screw: M5x12 Torx key: T20 Special features Compatible inserts: ONMX 0806 Compatible insert manufacturers: ISCAR, Korloy, LMN, YG‑1 Compact design for tight tool setups Quick-change Torx clamping system FAQ What inserts are required for this face milling head? The face milling head is designed for ONMX 0806 indexable inserts; compatible manufacturers include ISCAR, Korloy, LMN and YG‑1. How is the insert secured and what tool is needed? Inserts are secured with an M5x12 Torx screw; a T20 Torx key is used for tightening and removal. Which toolholder shank fits this cutter head? The cutter head accepts a tool shank diameter of Ø32 mm, allowing mounting in holders that accommodate this dimension. How many cutting edges are available on the head? The head features 7 cutting edges, arranged to balance material removal and surface finish during face milling. Is the head suitable for heavy roughing operations? The design is optimised for finishing and light face-cutting; for heavy roughing, evaluation against specific machine power and cutting parameters is recommended. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a robust combination of precise geometry and simple maintenance: the DF094TM delivers a 100 mm diameter cutting face with eight cutting edges and a 32 mm bore, ensuring reliable material removal and quick insert changes; order directly via Metav Werkzeuge or consult the specialists for application advice. Teknik Makina DF094TM Disc Milling Cutter — 100 mm, 32 mm bore The DF094TM disc milling cutter is an indexable cutter engineered for medium-duty milling with SCMT 09T3 inserts, suited to workshop and production environments where fast insert changes and consistent cutting performance matter 100 mm diameter for robust cutting Compatible with SCMT 09T3 indexable inserts 32 mm bore for common toolholders Eight cutting edges for increased removal rates Torx M4x11 clamping; T15 retention screw Boosted throughput from compact, focused geometry The tool's 100 mm diameter and eight cutting edges deliver a balance between cutting width and chip evacuation that supports continuous machining tasks. With an axial designation of 24 mm, the cutter is dimensioned for effective material removal per pass while keeping forces predictable for standard milling spindles. Such a geometry reduces the need for frequent depth adjustments, which translates into shorter set-up times and steadier production cycles. The construction and nominal weight of 0.477 kg also aid handling and rapid tool changes on the shop floor. Fast, safe insert changes and dependable clamping Designed for SCMT 09T3 indexable inserts, the disc cutter simplifies maintenance: inserts can be changed individually without replacing the whole head, which keeps consumable costs controlled and downtime low. Clamping uses a Torx M4x11 retention screw tightened with a T15 key, ensuring secure seating of each insert under cutting load. The result is predictable repeatability from one insert to the next and straightforward replacement routines for workshop staff who may be less experienced with indexable systems. Practical compatibility and handling advantages The 32 mm bore provides compatibility with a broad range of toolholders and arbors used in conventional milling and CNC setups. A 12 mm cutting height gives sufficient engagement for standard insert geometries, while the modular nature—accepting well-known insert sizes—means stocking spares is straightforward. Where balancing and runout matter, the simple, rigid mounting reduces vibration risk and supports consistent surface finish on workpieces without elaborate fixturing. Why this cutter suits everyday production For manufacturers seeking a pragmatic upgrade to indexable milling, this disc cutter keeps investment and logistics simple: it accepts an established insert type, uses a common clamping system and fits standard toolholders. The combination of compact mass, deliberate cutting geometry and the ability to replace inserts quickly supports continuous operation in jobbing shops and light production runs. Technical purchases are backed by Metav’s positioning as a precision partner, offering reliable supply from Emmerich and a broad spare-parts availability. For tailored technical advice on integrating the Teknik Makina DF094TM into production, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DF094TM Manufacturer: Teknik Makina Diameter: 100 mm Number of cutting edges: 8 For inserts: SCMT 09T3 Facts Bore / arbor: 32 mm Cutting height: 12 mm Axial depth capability: 24 mm Weight: 0.477 kg Retention screw: M4x11 Special features Indexable insert system Torx clamping with T15 key Compatible with standard toolholders Lightweight, compact disc design FAQ Which insert type fits the cutter? The cutter accepts SCMT 09T3 indexable inserts; these inserts are widely available and allow single-edge replacement when worn. What is the required arbor size for mounting? A 32 mm bore is specified for mounting the disc milling cutter; this suits common toolholders used in milling spindles. How many cutting edges are provided and what is the cutting height? The tool is configured with eight cutting edges and a 12 mm cutting height, enabling substantial cutting engagement per pass. What retention screw and key are needed to secure inserts? Clamping uses a Torx M4x11 screw and requires a T15 key for secure tightening and repeatable seating. What axial depth is indicated for this tool? An axial depth figure of 24 mm is provided for planning passes and ensuring compatibility with process parameters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from robust face milling performance combined with broad insert compatibility and secure, repeatable clamping for reduced downtime and reliable surface finishes. Order the face milling head directly via Metav Werkzeuge or consult our specialists for application-specific guidance. Planmesserkopf — Face milling head, Ø100 mm, for APKT 1604 / APXT 1003 (Teknik Makina) The Planmesserkopf is a precision face milling head engineered for high-efficiency metal removal in milling and production environments; it is specially configured for use with APKT 1604 and APXT 1003 indexable inserts. Face milling head for APKT 1604/APXT 1003 inserts 100 mm diameter for stable metal removal Six cutting edges for high material removal 32 mm shank, secure toolholder fit Consistent heavy-duty milling performance and productivity gains The face milling head delivers a combination of Ø100 mm working diameter and six cutting edges, which together increase material removal rates while keeping cutting forces balanced. This geometry, with a defined 75° cutting angle, reduces vibration and promotes a consistent chipbreak pattern, which translates into smoother surfaces and less rework. For production lines where cycle time matters, the head’s design supports steady feed rates and predictable tool life, providing a measurable improvement in throughput without compromising finish quality. Secure mounting and efficient insert changeover Mounting and maintenance are simplified by the 32 mm toolholder interface and the dedicated fastening hardware. The head uses an M4x10 Torx screw and is tightened with a T15 Torx key, ensuring repeatable clamping torque and minimal setup variation between tool changes. Compatibility with Korloy indexable inserts and standard APKT 1604 / APXT 1003 geometries means replacement stock is straightforward to manage. The combination of standardised fixing and widely available inserts reduces downtime during tool swaps and simplifies inventory control. Built for workshop reliability and versatile application Constructed for robust everyday use, this milling cutter head balances mass and rigidity — weighing approximately 1.587 kg — to resist chatter under higher material removal conditions. The tool’s overall length of 52 mm keeps the centre of gravity close to the spindle, aiding stability for face milling on castings, plates and blocks. Where reliability and repeatability are required, the design supports long runs and predictable maintenance intervals while remaining suitable for a wide range of conventional workshop operations. Secure the Teknik Makina face milling head (SKU T312TM) via Metav Werkzeuge — phone +49 2822 7131930 or email info@metav-werkzeuge.com to confirm compatibility and arrange rapid delivery from Emmerich Technical Data SKU: T312TM Manufacturer: Teknik Makina Article: Planmesserkopf — for APKT 1604 and APXT 1003 Indexable Inserts Core specifications Diameter: 100 mm Number of cutting edges: 6 Shank diameter: 32 mm Overall length: 52 mm Cutting angle: 75° Weight: 1.587 kg Special features Torx screw: M4x10 Torx key: T15 Fits Korloy inserts Compatible inserts: APKT 1604, APXT 1003 FAQ Which indexable inserts are compatible with the face milling head? The face milling head accepts APKT 1604 and APXT 1003 indexable inserts; compatibility with Korloy-manufactured inserts is confirmed for these insert types. What are the key dimensions to check for machine compatibility? Check the 100 mm cutter diameter and 32 mm shank diameter; the overall length is 52 mm, which helps determine clearance and spindle overhang. How is the insert clamped and which tool is needed for replacement? Inserts are secured using an M4x10 Torx screw that requires a T15 Torx key for reliable tightening and repeatable changeovers. Is the head suitable for heavy material removal and stable finishing? Yes — with six cutting edges and a 75° cutting angle, the tool is designed to provide stable cutting conditions and consistent surface finishes under typical face milling loads. What should be considered for inventory and replacement parts? Maintain stock of APKT 1604 / APXT 1003 inserts and M4x10 Torx screws; the head’s use of common insert geometries facilitates straightforward spare-parts management. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of robust cutting performance and stable clamping for consistent production results — the combination of a 100 mm cutting diameter and seven cutting edges reduces cycle time while maintaining surface quality. Order the T719TM face mill directly via Metav Werkzeuge or ask the Metav consultants for substrate and insert compatibility. T719TM Face Mill – Indexable face mill for RPMW 1606 inserts, Ø100 mm, 7 cutters | Teknik Makina T719TM Face Mill is a purpose-built indexable milling cutter designed for RPMW 1606 inserts, delivering productive facing and shoulder milling in CNC and conventional operations. Ø100 mm cutting diameter Seven cutting edges for increased productivity 32 mm shank for stable mounting Compatible with RPMW 1606 Korloy inserts Faster cycle times with consistent material removal The T719TM capitalises on a 100 mm cutting diameter and seven cutting edges to increase material removal per revolution, which translates into fewer passes and shorter cycle times on batch jobs. The use of indexable inserts (RPMW 1606) means that cutters can be restored to full cutting condition by rotating or replacing the insert rather than regrinding a solid tool, lowering ongoing tooling costs. For operations seeking a measurable increase in throughput, this configuration provides a clear productivity advantage while maintaining predictable cutting forces. Secure clamping and vibration control for better surface finish A 32 mm arbor diameter provides a rigid connection between spindle and cutter, improving run-out tolerance and reducing chatter during heavier cuts. The cutter secures inserts with an M5x12 Torx screw (Torx key size T20), ensuring repeatable insert seating and torque. The assembly’s overall height of 55 mm contributes to axial stability and consistent cutter geometry, which helps achieve a uniform surface finish and extends insert life by avoiding micro-movement under load. Flexible insert strategy for different applications This cutter accepts RPMW 1606 inserts in the KRLY designation, a solution that allows selection of grades suited to finishing, semi-finishing or higher-feed operations. By pairing the tool body with inserts tailored to the workpiece material and cutting parameters, customers gain an adaptable tool system rather than a single-purpose cutter. The indexable approach reduces downtime for tool changes and simplifies stockkeeping, making toolroom logistics more efficient without sacrificing machining quality. Ready for production supply and technical advice Metav’s distribution model provides reliable access to spare screws, keys and compatible inserts, and the T719TM is delivered as a workshop-ready cutter body that integrates with standard RPMW 1606 insert inventories. For procurement and planning, Metav’s role as a precision supply partner ensures consistent availability and a straightforward replacement path for consumables, contributing to uninterrupted production and predictable lead times. Contact Metav Werkzeuge for detailed compatibility advice and to confirm the best insert grade for the intended application of the Teknik Makina T719TM face mill Technical data Article number: T719TM Manufacturer: Teknik Makina SKU: T719TM Compatible inserts: RPMW 1606 Facts Diameter: 100 mm Overall height: 55 mm Cutting edges: 7 Shank diameter: 32 mm Special features Compatible with RPMW 1606 indexable inserts Insert designation: KRLY Torx screw: M5x12 Torx key size: T20 Indexable face mill body by Teknik Makina FAQ Which inserts fit this face mill? The face mill accepts RPMW 1606 indexable inserts; the tool body is specified for the KRLY-style inserts produced by Korloy and similar manufacturers. How is an insert secured in the cutter? Inserts are fixed with an M5x12 Torx screw using a T20 key, providing repeatable clamping and stable seating for the RPMW 1606 inserts. What benefits do seven cutting edges provide? Seven cutting edges distribute the cut among more teeth, increasing material removal per rev and smoothing cutting forces, which reduces cycle time and helps maintain a consistent finish. Is the tool suitable for heavy machining? The robust 32 mm shank and secure insert clamping make the cutter suitable for moderate to heavy facing operations when used with the correct insert grade and appropriate cutting parameters. Where can replacement parts and inserts be sourced? Replacement screws, keys and RPMW 1606 inserts compatible with this cutter body are available through Metav Werkzeuge and their authorised distribution channels. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high-stability design and proven compatibility with SNKX 1206 indexable inserts; the combination of a 45° cutting angle and Ø100 mm body delivers efficient face milling and predictable surface finish. Order directly via Metav Werkzeuge or ask the consultants for application advice. Face milling head T330TM by Teknik Makina — face milling head for SNKX 1206 indexable inserts, 45° cutting angle A robust face milling head T330TM designed for secure fitting of SNKX 1206 indexable inserts in general and finishing milling operations Compatible with SNKX 1206 indexable inserts Ø100 mm body diameter 45° cutting angle for versatile milling 32 mm arbor diameter for standard toolholders Consistent cutting performance for production workflows The T330TM face milling head is engineered to offer consistent cutting performance in batch and single-part production. The 45° cutting angle reduces cutting forces while maintaining effective material removal, which supports stable feeds and longer insert life. With a 113 mm max cutting diameter and a compact body of Ø100 mm, the head combines accessible reach with predictable cutting behaviour, enabling more efficient cycle planning and reduced rework. Fast set-up and broad tooling compatibility Designed for modern tooling systems, the head accepts SNKX 1206 indexable inserts and is compatible with insert brands such as Böhlerit, Korloy and Palbit. The 32 mm arbor accommodates standard arbors and clamping systems; the included Torx screw specification M4x12.5 with key T15 simplifies secure insert mounting. Explaining the term: indexable inserts are replaceable cutting tips that allow quick tool renewal without reclamping the entire head, which shortens downtime and keeps production flowing. Durable design that supports workshop efficiency With 8 cutting edges, a balanced geometry and a total length of 52 mm, the head is dimensioned for robust chip evacuation and even wear distribution. The measured weight of 1.926 kg contributes to stable spindle dynamics without excessive inertia. These features translate into fewer tool changes and consistent surface quality across runs, making the T330TM a practical choice where repeatability and uptime are priorities. For tailored advice on integrating Teknik Cutting Tools' T330TM face milling head into existing toolholders, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 — consultation and procurement support available. Technical data SKU: T330TM Manufacturer: Teknik Makina Designation: Planmesserkopf Secondary designation: for SNKX 1206 Indexable Inserts Facts Diameter (body): 100 mm Max. cutting diameter: 113 mm Arbor/holding diameter: 32 mm Total length: 52 mm Weight: 1.926 kg Cutting angle: 45° Number of cutting edges: 8 Torx screw: M4x12.5 Torx key: T15 Special features Suitable for SNKX 1206 indexable inserts Compatible with Böhlerit, Korloy, Palbit inserts Indexable-insert mounting for quick replacement Balanced geometry for stable milling FAQ What insert type does the T330TM accept? The T330TM face milling head is configured for SNKX 1206 indexable inserts and supports inserts from Böhlerit, Korloy and Palbit. What arbor diameter is required for mounting? Mounting requires a 32 mm arbor, which fits standard toolholders used in many milling spindles. How does the 45° cutting angle affect machining? A 45° cutting angle reduces radial cutting forces and promotes smoother engagement, improving surface finish and extending insert life under comparable cutting conditions. How many cutting edges are available on the head? The head is designed with 8 cutting edges, providing balanced load distribution and efficient chip removal during face milling. Is the T330TM suitable for larger face milling operations? With a 113 mm max cutting diameter the T330TM covers many medium-sized face milling tasks while remaining compact for versatile setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust planing cutter head that combines a 100 mm diameter, eight cutting edges and secure Torx clamping for consistently high material removal rates; order directly via Metav Werkzeuge or request advice from our consultants for seamless integration. Planing cutter head T346TM – 100 mm diameter, 8 cutting edges (Teknik Makina) The planing cutter head T346TM is a compact face-milling solution designed for use with SNMX 1206 indexable inserts, suitable for general-purpose and medium-duty finishing operations 100 mm diameter for high material removal Eight cutting edges for consistent surface finish 32 mm shank for secure toolholder mounting Torx M4x12.5 clamping with T15 key Boosted throughput with wide engagement and indexable inserts The combination of a 100 mm diameter and eight cutting edges ensures a larger engagement area per revolution, which translates into improved productivity on batch work and shorter cycle times. Compatibility with SNMX 1206 indexable inserts allows quick insert replacement without regrinding, keeping machines running and downtime low. Inserts are the wear part; the cutter head provides the stable platform that enables repeatable results and predictable tool life. Stable clamping and quick, repeatable insert changes Secure fixing is achieved via an M4x12.5 Torx clamping screw operated with a T15 key, providing reliable seating of the insert and minimising vibration. The 32 mm mounting bore offers a rigid connection to standard toolholders, and the cutter’s mass (approx. 1.688 kg) contributes to steadiness during cutting. Together these features reduce chatter, improve surface finish and simplify indexable-insert changes—benefits that are immediately measurable at the shop-floor level. Accurate face results and compact integration into toolsets A near-orthogonal 88° cutting angle gives a well-balanced cut geometry for flat surfaces, while the 50 mm overall length keeps the assembly compact for close work and multi-tool turrets. The toolhead’s design supports reliable face milling and finishing tasks where dimensional consistency matters. Where retrofit or new-tool planning is required, the T346TM integrates without extensive setup changes and complements existing insert stocks for efficient tool management. Discuss application needs with Metav Werkzeuge — technical advisors are available to confirm fitment, recommend inserts and support specification choices; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: T346TM Designation: Planing cutter head for SNMX 1206 indexable inserts Manufacturer: Teknik Makina Suitable for: SNMX 1206 indexable inserts Compatible insert maker: Korloy Diameter: 100 mm Cutting edges: 8 Mounting bore: 32 mm Cutting angle: 88° Overall length: 50 mm Weight: 1.688 kg Clamping screw: M4x12.5 (Torx T15) Facts Diameter: 100 mm Cutting edges: 8 Mounting bore: 32 mm Overall length: 50 mm Weight: 1.688 kg Cutting angle: 88° Special features Torx clamping: M4x12.5 Torx key: T15 Compatible with Korloy inserts Suitable for SNMX 1206 indexable inserts SKU: T346TM FAQ What insert type fits this cutter head? The cutter head accepts SNMX 1206 indexable inserts; compatibility is stated for the toolhead T346TM and aligns with common SNMX 1206 geometries. How is the insert secured in the head? Inserts are clamped with an M4x12.5 Torx screw, tightened using a T15 key, which provides a secure, repeatable seating to reduce the risk of movement under load. Which toolholder diameter is required? The head requires a 32 mm mounting bore for secure attachment to standard toolholders and collet systems. What surface result can be expected from the geometry? The 88° cutting angle produces a near-planar engagement that favours flat face milling and consistent surface finish with reduced radial cutting forces. Is the head suitable for automated turret systems? With a 50 mm overall length and standard mounting, the T346TM integrates readily into turrets and multi-spindle setups where compact tool assemblies are needed. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining 100 mm diameter, internal coolant and compatibility with WNMX 1305 indexable inserts, this face milling solution delivers efficient material removal with reduced downtime and improved surface quality. Order the tool directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. T689-1TM 100 mm face milling head by Teknik Makina – with internal coolant and WNMX 1305 compatibility T689-1TM 100 mm face milling head by Teknik Makina is a compact milling head designed for economical face machining with indexable inserts in industrial and workshop environments. 100 mm diameter for broad face milling Internal coolant for improved chip control Designed for WNMX 1305 indexable inserts Six cutting edges for efficient material removal Torx T15 screws with M4x10 fixation Consistent productivity with indexable inserts and six cutting edges The face milling head is engineered for continuous, repeatable production where short changeover times matter. Accepting WNMX 1305 indexable inserts, the cutter body uses six cutting edges to spread cutting forces and increase material removal rates while reducing tool changes. This configuration lowers per-part tooling costs and supports a steady production rhythm, making the assembly suitable for batch work and repetitive finishing operations. The modular insert system simplifies inventory since a single insert type can service multiple cutter bodies. Internal coolant improves tool life and surface quality A built-in internal coolant channel directs cutting fluid close to the cutting zone, which aids chip control and helps maintain cutting edge integrity under load. For operations that demand consistent finishes, targeted coolant reduces heat and prevents built-up edge, leading to more reliable surface quality and longer insert life. For customers less familiar with coolant-fed tools: internal coolant ensures the fluid reaches the insert flank and rake more effectively than external nozzles, improving lubrication and evacuation without complex setup changes. Robust dimensions for stability and accurate machining With a 100 mm diameter and a compact 50 mm overall length, the milling body balances stiffness and accessibility. The compact geometry limits overhang and improves rigidity, which reduces vibration and contributes to tighter tolerances on the finished component. This design is particularly beneficial where surface integrity and dimensional repeatability are required, such as finishing operations and precise facing tasks on medium-sized workpieces. Fast clamping and straightforward maintenance to reduce downtime Maintenance and insert changes are straightforward: clamping is achieved with Torx T15 drive screws (M4x10), providing secure fixation and quick exchange of inserts without specialised tooling. The head is compatible with inserts from established suppliers, including Korloy, which simplifies supply logistics. The accessible clamping system and standardised fasteners keep service intervals short and lower the overhead associated with tool upkeep. For application matching, drawing requests or to confirm suitability for specific materials, contact Metav Werkzeuge for tailored advice and order handling: info@metav-werkzeuge.com — Tel. +49 2822 7131930 Technical data Article number: T689-1TM Label: 100 mm face milling head for WNMX 1305 with internal coolant Manufacturer: Teknik Makina Facts Diameter: 100 mm Overall length: 50 mm Weight: 1.625 kg Cutting edges: 6 Special features Internal coolant Compatible with WNMX 1305 indexable inserts Suitable for Korloy inserts Torx T15 drive, M4x10 screws FAQ Which insert type fits this milling head? The milling head accepts WNMX 1305 indexable inserts; compatibility is specified for that insert geometry. Is internal coolant integrated in the tool body? Yes — the tool includes internal coolant, routed to the cutting zone to support chip evacuation and extend insert life. How many inserts are fitted per head? The cutter body carries six cutting edges, allowing distributed cutting forces and efficient material removal. What fastening hardware is required for insert fixation? Insert fixation uses Torx T15 drive screws with M4x10 dimensions for secure clamping. Who manufactures the tool and what is the SKU? The tool is produced by Teknik Makina; SKU/Article number: T689-1TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust cutting geometry, secure 32 mm mounting and broad 100 mm diameter for consistent face milling performance; order directly via Metav Werkzeuge or consult the technical team for compatibility and stock information. Face-milling head T704TM by Teknik Makina — 100° cutting geometry, for ENMX 0905 indexable inserts The Face-milling head T704TM is a precision cutter head designed for face milling with ENMX 0905 indexable inserts and a 100° cutting geometry, suitable for workshop and industrial milling applications 100 mm diameter for high area coverage Compatible with ENMX 0905 indexable inserts 32 mm shank diameter for secure mounting 100° cutting angle for controlled chip flow High-volume material removal with consistent stability The design provides a wide cutting platform with a 100 mm diameter that spreads cutting forces and reduces individual insert load. With 10 cutting edges arranged around the periphery and a 100° cutting angle, the head is engineered for even wear distribution and predictable chip formation. The 32 mm bore ensures a tight fit in standard toolholders, which improves runout stability and repeatability on production machines. These characteristics together support efficient, measurable cycle times and lower frequency of tool changes. Rapid insert replacement and maintenance-friendly fastenings Serviceability is simplified by standardised fastening: the cutters are secured with M3.5x8.5 Torx screws accessible with a T10 Torx key, enabling quick index changes and routine checks without specialised tooling. The head accepts ENMX 0905 inserts and is compatible with YG-1 manufactured plates, facilitating fast replenishment from common suppliers. This reduces unplanned downtime and keeps set-up times predictable, helping to maintain throughput in busy shops. Durable construction that supports production reliability The assembly is built to industrial tolerances with an overall compact profile (total height 63 mm) that balances stiffness and accessibility at the cutter edge. The combination of robust mounting, standardised insert geometry and manufacturer-graded components from Teknik Makina results in a component that integrates well into existing tool inventories and fixturing systems. Where process stability and repeatability matter, the head presents a pragmatic choice for operations seeking controlled chip evacuation and consistent surface finish For technical clarification on the T704TM face-milling head, spare-part compatibility or to reserve stock, contact Metav Werkzeuge in Emmerich by e-mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored advice and procurement support Technical data Article number: T704TM Manufacturer: Teknik Makina Diameter: 100 mm Shank bore: 32 mm Overall height: 63 mm Cutting edges: 10 Cutting angle: 100° Fastening screws: M3.5x8.5 Torx key: T10 Special features Compatible with ENMX 0905 indexable inserts Compatible with YG-1 insert manufacturer SKU: T704TM 100° face-milling geometry FAQ What insert type does this milling head accept? The T704TM face-milling head accepts ENMX 0905 indexable inserts and is compatible with inserts from the manufacturer YG-1. Which toolholder size is required for mounting? The cutter head requires a toolholder with a 32 mm bore for secure mounting and accurate clamping. How are the inserts secured and exchanged? Inserts are secured with M3.5x8.5 Torx screws; a T10 Torx key is used for removal and refitting to enable rapid index changes. Is the T704TM suitable for high-production environments? The combination of a 100 mm diameter, 10 cutting edges and a 100° cutting angle yields stable cutting conditions aimed at production-focused milling operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of robust face-milling performance, precise mounting and fast insert changes: the combination of a Ø100 mm cutting diameter, 7 cutting edges and a 32 mm shank delivers high material removal rates with stable clamping. Order this tool via Metav Werkzeuge or consult the technical team for application-specific advice. Planmesserkopf — face-milling cutter head, Ø100 mm, for ODHT 0605 indexable inserts (Teknik Makina) The Planmesserkopf is a face-milling cutter head engineered for short-cycle finishing and medium-duty roughing with ODHT 0605 indexable inserts, suited to CNC milling centres and machining stations. *Ø100 mm diameter for broad face milling *7 cutting edges for efficient material removal *Compatible with ODHT 0605 indexable inserts *32 mm shank diameter for secure mounting High-capacity face milling that shortens cycle times The cutter head combines a Ø100 mm cutting diameter with 7 cutting edges and a 43° cutting angle to increase removed volume per pass while preserving surface quality. The steeper 43° inclination reduces radial cutting forces and spreads cutting load over multiple inserts, which lowers vibration and extends tool life. This geometry is advantageous for operations where stable chip formation and predictable wear progression are required, supporting faster feed rates and improved productivity on batch and single-part production runs. Secure clamping and simple insert retention for reliable runs A robust 32 mm shank provides a rigid connection to standard tool holders, reducing deflection under load and improving concentricity. Inserts are clamped with an M5x12 Torx screw, tightened using a T20 key, enabling repeatable torque application and quick replacement of indexable inserts. The tool's mass of 1.765 kg contributes to damping cutting vibrations without compromising handling during set-up. The result is a toolhead that simplifies fixture alignment and reduces unplanned downtime caused by marginal clamping. Compatible system and practical workshop integration Designed specifically for ODHT 0605 indexable inserts and compatible with Walter insert standards, this cutter head integrates into existing tooling systems without the need for special adaptors. The compact overall length of 52 mm and standard interface make it suitable for many milling configurations where space and access are considerations. Its construction supports efficient insert indexing and predictable maintenance intervals, facilitating lean tool management and consistent part quality across shifts. For technical application advice or to procure the face-milling cutter head from Teknik Makina (SKU T212TM), contact Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss mounting, insert selection and delivery options Technical data Article number: T212TM Name: Planmesserkopf Type: Face-milling cutter head for ODHT 0605 indexable inserts Manufacturer: Teknik Makina Core data Diameter: 100 mm Shank diameter: 32 mm Overall length: 52 mm Weight: 1.765 kg Cutting angle: 43° Number of cutting edges: 7 Torx screw: M5x12 Torx key: T20 Special features Compatible with Walter ODHT 0605 inserts Designed for face-milling operations Robust design for reduced vibration FAQ Which inserts fit this cutter head? The cutter head is designed for ODHT 0605 indexable inserts and is compatible with Walter-manufactured ODHT 0605 insert types. What is the required clamping hardware for insert retention? Insert retention is achieved with an M5x12 Torx screw tightened using a T20 key, as specified for the cutter head (T212TM). What are the main advantages of the 43° cutting angle? A 43° cutting angle reduces radial force peaks and spreads the cutting load across inserts, which improves surface finish and contributes to longer insert life in the Planmesserkopf. Is the shank compatible with standard tool holders? The 32 mm shank provides a standard interface for many tool holders, offering rigid mounting and improved concentricity for stable milling operations. How many cutting edges are available per revolution and what does that mean for productivity? With 7 cutting edges, the cutter head engages multiple edges per revolution, increasing material removal per pass and enabling higher feeds for improved productivity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of 100 mm diameter and a 60 mm overall length to secure stable, repeatable face milling performance with BLMP 0904 inserts; the compact design and well‑distributed nine cutting edges reduce vibration and support consistent surface finish. Order the face milling head directly via Metav Werkzeuge or consult our technical team for application matching. Face milling head — 100 mm diameter, for BLMP 0904 indexable inserts (Teknik Makina) The face milling head for BLMP 0904 indexable inserts is a compact, high‑stability cutter head designed for precision face milling in production and toolroom environments. 100 mm diameter for stable face milling Compatible with BLMP 0904 indexable inserts Compact 60 mm overall length for tight set‑ups High material removal with controlled finish The 100 mm diameter and nine cutting edges provide a broad contact area that distributes cutting forces and reduces chatter during face milling. This geometry enables efficient material removal while maintaining a consistent surface quality, especially useful for finishing passes where dimensional repeatability matters. The specified 100° cutting angle supports a favourable chip flow and lowers cutting forces, which helps extending insert life and reduces spindle load. Fast insert changes and serviceable fastening Tool changes are simplified by the standard Torx T10 interface and the supplied M3,5x8,5 Torx screws, enabling quick and secure clamping of indexable inserts. This configuration shortens maintenance intervals and minimises machine downtime during insert replacement. The cutter’s compact 60 mm overall length supports tight fixturing and reduces the likelihood of overhang‑induced vibration in confined setups. Production compatibility and balanced handling Designed for use with BLMP 0904 indexable inserts and compatible with Taegutec insert systems, the head integrates into common cutter families without extensive adaptations. The unit weight of 2.32 kg contributes to stable spindle inertia and helps maintain concentricity at moderate speeds, offering predictable cutting behaviour across series production runs. The robust construction provides a steady platform for repeatable results. Practical benefits for workshop and small‑batch production The compact face milling head combines a stable cutting circumference with straightforward fastening, making it suitable for both machine shop and light industrial applications where setup speed and surface consistency are priorities. The design supports rapid adaptation between jobs and reduces the need for frequent balancing adjustments, improving overall shop throughput and scheduling reliability. For straightforward integration into existing CNC workflows, contact Metav Werkzeuge for procurement advice and application support for the Teknik Makina face milling head (SKU T487-5TM) — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: T487-5TM Label: 100mm Planmesserkopf BLMP 0904 L60mm Manufacturer: Teknik Makina Eclass: 21181015 Facts Diameter: 100 mm Overall length: 60 mm Weight: 2.32 kg Cutting edges: 9 Cutting angle: 100° Special features Compatible with BLMP 0904 indexable inserts Matching insert manufacturer: Taegutec Torx key: T10 Torx screws: M3,5x8,5 Product type: Planmesserkopf bezeichnung_2_en: for BLMP 0904 Indexable Inserts FAQ What inserts fit this cutter head? The face milling head is designed for BLMP 0904 indexable inserts and is compatible with inserts from Taegutec. How many cutting edges does the head use? This milling head carries nine cutting edges, arranged to balance load and improve surface finish. Which tool secures the screws for insert clamping? A T10 Torx key is specified for the Torx screws (M3,5x8,5) used to clamp the inserts. Is the head suitable for compact set‑ups? Yes — the compact 60 mm overall length makes the cutter head appropriate for tight fixturing and reduced overhang. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of compact design, internal coolant, and compatibility with HNGX 0906 indexable inserts for reliable, high‑throughput face milling; order directly via Metav Werkzeuge or consult the technical team for integration advice 100 mm Face Milling Head — for HNGX 0906 Indexable Inserts, Internal Coolant (Teknik Makina) The face milling head for HNGX 0906 indexable inserts delivers stable, high‑precision facing and shoulder milling with internal coolant for improved tool life and process consistency 100 mm diameter for stable face milling Internal coolant for enhanced tool life 8 cutting edges for efficient material removal Compatible with HNGX 0906 inserts (Pramet) Consistent metal removal and productive cycle times The compact 100 mm cutter body is designed to maintain stability at the tool centre while delivering high material removal rates; with 8 cutting edges and a 45° cutting geometry the assembly balances shear and chip evacuation for smooth face milling operations. This configuration reduces vibration and extends insert life, which directly supports higher machine utilisation and measurable cycle‑time improvements. Compatibility with HNGX 0906 indexable inserts ensures availability of proven grades and chipforms for both finishing and light roughing. Controlled cooling for longer tool life and process reliability An integrated coolant channel supplies cutting fluid close to the cutting edge for optimised temperature control and improved chip wash‑out. The presence of internal coolant minimises built‑up edge and thermal wear, resulting in more consistent surface finishes and less frequent insert changes. For demanding workpiece batches where thermal stability is critical, the coolant feed contributes to repeatable results and reduces the risk of premature tool failure. Fast, safe servicing and low downtime Designed for straightforward maintenance, the head uses accessible fastenings and standard tooling for secure insert retention. The assembly accepts Torx fastenings and replacement screws for efficient servicing: Torx T15 for the securing tool and M4.5x11 screws for the insert seats. These standard interfaces cut tool change time and simplify inventory management, supporting a predictable maintenance routine on the shop floor. Broad applicability across machining tasks The cutter head performs reliably across a range of operations where face quality and dimensional control matter; the 45° rake provides a compromise between cutting force and finish, suitable for various steels and general workshop materials. The head is matched to inserts from Pramet, enabling selection of grades tailored to the application—this flexibility supports both prototype work and serial production without major tool redesign. Ready for integration into production environments With a compact overall length of 50 mm and a body mass of 1.542 kg, the design facilitates balance correction and straightforward mounting on common toolholders. The SKU T420-1TM identifies the exact configuration for procurement and spare‑parts planning. The robust construction and standardised interfaces simplify replacement scheduling and spare‑part stocking, helping to maintain continuous production flow and reduce the total cost of ownership. Contact Metav Werkzeuge for technical consultation and to secure the Teknik Makina face milling head T420-1TM with internal coolant for seamless integration into the production line; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: T420-1TM Label: 100mm Planmesserkopf HNGX 0906 L50mm mit Innenkühlung Product type: Face milling head Manufacturer: Teknik Makina Facts Diameter: 100 mm Overall length: 50 mm Weight: 1.542 kg Number of cutting edges: 8 Cutting angle: 45° Special features Internal coolant Compatible with HNGX 0906 indexable inserts Insert supplier match: Pramet Torx key: T15 Torx screw: M4.5x11 FAQ Which inserts fit this head? The face milling head is designed for HNGX 0906 indexable inserts and is specifically matched to inserts from Pramet for reliable seating and chip control. Is the cutter suitable for use with coolant through the spindle? Yes, the tool features internal coolant, allowing direct coolant delivery to the cutting zone when used with a compatible spindle feed. What fastening tools and screws are required for insert changes? Insert retention uses M4.5x11 screws tightened with a Torx T15 driver for quick and secure changes. Can the head be balanced for high‑speed applications? The compact 100 mm body and modest mass (1.542 kg) permit balance corrections on standard balancing equipment to suit higher spindle speeds and reduce vibration. How is the product identified for ordering and spare parts? Order and reference the SKU T420-1TM to obtain the exact Teknik Makina configuration and ensure matching spare screws and keys Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a 100 mm diameter, a 45° cutting angle and secure 32 mm shank to improve machining consistency and reduce downtime; order the cutter head directly via Metav Werkzeuge or consult our specialists for integration advice. Face-milling head (T792TM) – 100 mm diameter, 45° cutting angle (Teknik Makina) The face-milling head (T792TM) is a compact machining head designed for face milling operations using ONMX 0606 indexable inserts and offers a balance of rigidity and accessibility for small to medium machining centres 100 mm diameter for broad face milling 45° cutting angle for smooth finishing Compatible with ONMX 0606 indexable inserts 32 mm shank for secure clamping Consistent surface quality with reduced cutting forces The cutter head is configured around a 45° cutting angle, which reduces radial cutting forces and helps produce a finer surface finish than steeper approaches. With a 100 mm diameter, the tool offers a larger contact arc for each pass, allowing for stable chip formation and reduced vibration. These geometric features combine to improve process stability; the result is fewer reworks and a more predictable finishing step in the production chain. The assembly weight of 1.701 kg and the compact 52 mm overall length support a well-balanced spindle load while keeping the tool envelope compact for tighter setups. Fast insert changes and proven system compatibility Designed for use with ONMX 0606 indexable inserts and compatible with Korloy inserts, the head simplifies tooling logistics by adopting a common insert family. Insert replacement is secured with M5x12 Torx screws; the specified driver is T20, ensuring repeatable clamping torque and simple maintenance. Using standardised screw sizes and a known insert format minimises spare-part variety and shortens changeover times on the shop floor, which supports higher spindle availability and lower operational complexity. Secure mounting and reliable clamping for shop-floor use The tool mounts on a 32 mm shank, providing a robust interface for a wide range of toolholders and quick-change systems. The shank diameter, paired with the head’s geometry, reduces deflection under load and maintains cutting stability during heavier engagements. The head carries seven cutting positions, arranged to distribute wear and permit indexing. This design choice extends usable tool life and keeps machining tolerances consistent across runs, contributing to a reliable manufacturing process without excessive operator intervention. Practical fit for workshop workflows and maintenance routines This face-milling head suits environments where modularity and serviceability are priorities: standardised inserts, a recognisable screw system and compact dimensions make it straightforward to store spares and train operators. The tool’s design supports scheduled maintenance and fast in-field servicing; replaced inserts restore cutting performance quickly, reducing unplanned downtime. For teams standardising tooling across cells, the compatibility with the ONMX 0606 family simplifies procurement and inventory management while retaining the option to choose inserts from Korloy or other suppliers that match the specification. Contact Metav Werkzeuge today to integrate the Teknik Makina T792TM face-milling head into existing tooling systems and secure tailored advice from our specialists. Technical data Article number: T792TM Manufacturer: Teknik Makina ECLASS: 21180902 Facts Diameter: 100 mm Cutting angle: 45° Shank diameter (D): 32 mm Weight: 1.701 kg Overall length: 52 mm Cutting positions: 7 Special features Compatible inserts: ONMX 0606 Recommended insert manufacturer: Korloy Torx screw: M5x12 Torx key: T20 Suitable for ONMX 0606 indexable inserts FAQ Which indexable inserts fit this head? The head accepts ONMX 0606 indexable inserts; compatibility with Korloy inserts is specified for the Teknik Makina face-milling head (T792TM). What is the shank size required for mounting? Mounting requires a 32 mm shank interface; the Ø32 connection ensures stable clamping for the T792TM assembly. What are the key dimensions to consider for machine setup? Important dimensions are 100 mm diameter, 52 mm overall length and 32 mm shank diameter for the T792TM, which together determine clearance and balance requirements. How many cutting positions are available and what is the benefit? The head provides 7 cutting positions, enabling indexing to renew the cutting edge quickly and prolong the time between full tool changes. Which fastening hardware and tool are needed for insert changes? Insert clamping uses M5x12 Torx screws tightened with a T20 Torx key for repeatable clamping torque on the T792TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact milling solution that combines 100 mm diameter performance, internal coolant and compatibility with ONMX 0806 indexable inserts for reliable face milling results; order the item directly via Metav Werkzeuge or consult our specialists for tailored advice. Face mill head for ONMX 0806 indexable inserts — 100 mm, internal coolant (Teknik Makina) A face mill head designed for efficient metal removal with ONMX 0806 indexable inserts, featuring a 100 mm diameter and internal coolant for cleaner cutting and longer tool life. 100 mm diameter for efficient face milling Compatible with ONMX 0806 indexable inserts Internal coolant for improved chip evacuation Robust 50 mm total length, 7 cutting edges Faster, more consistent material removal for production work The 100 mm diameter head delivers a larger cutting circle, enabling higher material removal rates while maintaining a consistent surface finish. Fitted to accept ONMX 0806 indexable inserts, this milling solution reduces milling passes and machine time; the combination of the cutter geometry and the 7 cutting edges allows for smoother engagement and distributes cutting forces more evenly. For production environments seeking predictable cycle times, the design translates into measurable throughput improvements and fewer tool changes. Cooler cutting zone and extended tool life through internal coolant Integrated internal coolant channels ensure coolant reaches the cutting zone directly, supporting effective chip evacuation and temperature control at the insert interface. By flushing chips away and reducing thermal load on the cutting edges, the cooling system helps to extend insert life and maintain dimensional accuracy over longer runs. The result is reduced downtime for insert changes and more consistent part quality across batch production. Straightforward assembly and secure clamping for workshop efficiency The head is secured with M5x12 Torx screws tightened with a T20 Torx key, enabling quick, repeatable insert clamping and minimal setup time. A compact 50 mm total length keeps the assembly rigid and well suited to confined toolholders, while the robust construction and clear fastening standard simplify maintenance. For workshops aiming to reduce set-up complexity, these mechanical details translate into faster tool changes and reliable repeatability. Built for compatibility and practical use in metalworking Engineered specifically for ONMX 0806 inserts, this milling head integrates with common indexable tooling systems and supports typical face milling tasks across steels and general ferrous materials. The head’s geometry and coolant routing were chosen to balance chip control and cutting stability, making it appropriate for both single-part finishing and batch machining. Limited inventory complexity and standardised fastening mean easier stocking and fewer special tools required. For availability, delivery options and tailored technical advice on the Teknik Makina face mill head (SKU T784-1TM), please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for a precise recommendation and lead-time information. Technical Data Article number: T784-1TM Product type: Face mill head Brand: Teknik Makina Label: 100mm Planmesserkopf ONMX 0806 L50mm mit Innenkühlung ECLASS: 21181015 Facts Diameter: 100 mm Total length: 50 mm Weight: 1.067 kg Cutting edges: 7 Cutting angle: 45° Torx key: T20 Torx screw: M5x12 Internal coolant: Yes Special features Compatible with ONMX 0806 indexable inserts Internal coolant channels Robust clamping with Torx screws Compact design for rigid mounting FAQ Which inserts fit this milling head? The head is compatible with ONMX 0806 indexable inserts; the geometry and insert size are matched to ensure stable cutting and correct seating. Is the coolant internal or external? The tool features internal coolant, which delivers coolant directly to the cutting edge for improved chip evacuation and temperature control. What is the total length and how does it affect rigidity? The total length is 50 mm; this compact length increases rigidity, reducing deflection and improving dimensional repeatability during face milling. How many cutting edges are available on the cutter? The assembly provides 7 cutting edges, allowing balanced cutting action and distributed wear for stable machining performance. Which screw and key are required for insert clamping? Insert clamping uses M5x12 Torx screws tightened with a T20 Torx key, enabling secure, repeatable fastening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of 100 mm diameter, internal coolant and seven cutting edges for efficient, repeatable surfacing operations; order the face milling head directly via Metav Werkzeuge or consult our technical team for specification support. Face milling head — 100 mm diameter, internal coolant (Teknik Makina) Face milling head designed for precision surfacing with SEET 12T3 indexable inserts, suitable for production machining and workshop refurbishment. 100 mm diameter for broad surface cuts Compatible with SEET 12T3 indexable inserts Internal coolant for improved chip evacuation Seven cutting edges for consistent material removal Precision surfacing for consistent results The 100 mm tool body delivers broad, stable engagement, reducing the number of passes required to reach nominal dimensions and smoothing cycle times. The tool features a 45° cutting geometry that balances cutting force and surface finish, while the reduced overall length (50 mm) improves rigidity at the toolholder interface. As a result, the face milling head gives higher process stability and predictable results across repeated runs, supporting efficient production planning and fewer reworks. Controlled coolant flow and secure insert clamping An integrated internal coolant channel directs lubricant to the cutting zone to support chip evacuation and thermal control, which helps maintain insert life and surface quality. Inserts are fastened with M3,5x11 Torx screws requiring a T15 key, enabling quick service intervals and secure clamping under high loads. The combination of internal coolant and positive clamping reduces the risk of built-up edge and supports longer continuous operation in batch or single-piece production. Operational benefits and workshop integration Designed by Teknik Makina, the tool body (SKU T566-1TM) is a compact and serviceable solution for facing and finishing tasks where repeatability matters. The seven cutting edges promote even wear distribution and sustained metal removal rates without frequent index changes. The moderate mass (approx. 1.812 kg) offers a balance between damping and responsiveness during plunge and peripheral operations. For buyers seeking a reliable component from a trusted supplier, this milling head integrates readily into standard toolholders and modular tooling systems. For tailored advice on integrating the Teknik Makina face milling head T566-1TM into existing setups or for supply from Metav Werkzeuge’s Emmerich stock, contact our consultants at Metav Werkzeuge for prompt, expert support. Technical data Article number: T566-1TM Brand: Teknik Makina Product type: Face milling head Numeric data Diameter: 100 mm Overall length: 50 mm Weight: 1.812 kg Cutting edges: 7 Cutting angle: 45° Design & features Compatible inserts: SEET 12T3 Internal coolant: yes Torx screw: M3,5x11 Torx key: T15 FAQ What indexable inserts does this milling head accept? The face milling head accepts SEET 12T3 indexable inserts, providing a standardised insert form for flexible tooling and easy replacement. Does the tool support through-coolant delivery? Yes, the Teknik Makina face milling head features internal coolant to direct coolant to the cutting edge for improved chip control and thermal management. What fastening hardware is required for insert replacement? Inserts are secured with M3,5x11 Torx screws and require a T15 Torx key for installation and removal. Is the milling head suitable for heavy-duty facing operations? The combination of 100 mm diameter, seven cutting edges and a 45° cutting geometry makes the tool well suited to stable facing and finishing tasks where rigidity and consistent metal removal are priorities. How heavy is the tool and what is the SKU for ordering? The tool weighs approximately 1.812 kg and is listed under SKU T566-1TM for ordering and inventory reference. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of high material-removal capability, internal coolant for stable cutting, and precise mounting for consistent surface quality — order directly via Metav Werkzeuge or consult our specialists for application advice. Face milling head for SEET 12T3 indexable inserts — 100 mm, internal coolant (Teknik Makina) A face milling head designed for industrial face machining with SEET 12T3 indexable inserts, optimised for high-feed finishing and reliable coolant delivery. 100 mm diameter for wide-area material removal Internal coolant supply for improved chip evacuation Seven cutting edges for stable cutting performance 45° rake angle for smooth surface finish Higher throughput with reproducible cutting results The face milling head delivers measurable productivity gains by combining a 100 mm diameter cutting circle with seven cutting edges, enabling more contact points per revolution and longer effective tool life between indexings. The 45° cutting geometry reduces axial load, which supports higher feed rates while maintaining a consistent surface finish. Where cycle time and repeatability matter, this configuration converts spindle power into uniform material removal without frequent re-adjustments. Improved process stability through coolant and secure fixing Built-in internal coolant channels support efficient chip evacuation directly at the cutting zone, reducing heat build-up and minimising the risk of built-up edge. This cooling strategy helps preserve insert life and maintain dimensional stability in continuous operations. The head accepts SEET 12T3 indexable inserts and is secured with M3.5x8.5 Torx screws (T15) for positive clamping and easy reassembly, supporting predictable tool-change routines in production environments. Designed for integration and straightforward maintenance With an overall length of 55 mm and a mounting/connection diameter of 32 mm, the milling head fits compact toolholders while preserving stiffness for heavy cuts. The component’s balanced design and its measured weight of 1.715 kg contribute to vibration damping and consistent surface quality. Maintenance is straightforward thanks to standardised fasteners and insert format, allowing quick re-indexing and minimised downtime in busy workshop or shop-floor settings. Contact Metav Werkzeuge today for tailored application advice and to request the Teknik Makina face milling head T437-1TM with internal coolant — call +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical details SKU: T437-1TM Label: 100mm Planmesserkopf SEET 12T3 L55mm eClass: 21181015 Measurements & core data Diameter: 100 mm Overall length: 55 mm Mounting diameter: 32 mm Weight: 1.715 kg Cutting edges: 7 Cutting angle: 45° Aufnahme_mm_d: 32 Features & compatibility Internal coolant: yes Compatible inserts: SEET 12T3 indexable inserts Torx key: T15 Torx screw: M3.5x8.5 Product type: Face milling head Manufacturer: Teknik Makina FAQ Which insert type fits this milling head? The face milling head is designed for SEET 12T3 indexable inserts, offering a standardised insert format for easy sourcing and replacement. Does the tool provide coolant to the cutting zone? Yes — the T437-1TM model includes internal coolant channels to support chip evacuation and reduce thermal loading at the cutting edge. What fasteners are used for the inserts? Inserts are secured with M3.5x8.5 Torx screws tightened with a T15 Torx key, allowing reliable clamping and simple servicing. What are the main dimensional data for mounting? Key mounting dimensions: 100 mm diameter, 55 mm overall length and 32 mm mounting diameter for compatibility with appropriately sized toolholders. How many cutting edges are active during operation? The head carries seven cutting edges, increasing the number of engagement points and distributing cutting forces for improved stability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combine precise 45° cutting geometry, a robust Ø100 mm body and fast insert changing for uninterrupted machining. Order the planing cutter head directly via Metav Werkzeuge or ask our consultants if needed. Planing cutter head (T167TM) – face milling head with 8 cutting edges, Teknik Makina A planing cutter head engineered for efficient facing and finishing tasks on CNC milling machines, designed for use with standard indexable inserts and conventional toolholders. Ø100 mm diameter for robust material removal Eight cutting edges for consistent surface finish 32 mm arbor connection for standard toolholders Quick insert replacement with M5x12 Torx fixing Higher material removal rates with predictable results The compact Ø100 mm body and 8 cutting edges provide a stable cutting platform that reduces vibration and delivers a more uniform surface finish. The defined 45° cutting angle lowers cutting forces while maintaining chip control, which helps to extend tool life and stabilise cycle times. For production environments the geometry translates into consistently repeatable passes, improved first-time-right rates and fewer reworks—clear efficiency gains for batch and single-part manufacturing alike. Fast set-up and secure clamping reduce downtime A 32 mm arbor interface ensures compatibility with common toolholders, while the indexable inserts are clamped with an M5x12 Torx screw and require a T20 key for replacement. This combination allows straightforward replacement of cutting edges in the workshop without ad hoc tooling, cutting changeover time and machine idle periods. The secure Torx fixing keeps insert seating stable under load, reducing the need for repeat torque checks and supporting predictable maintenance intervals. Robust design for industrial workloads and simple maintenance Weighing 1.925 kg, the milling head is built for heavy‑duty use without compromising balance. The solid construction supports consistent cutting performance across facing and light finishing operations, while the accessible screw and arbor dimensions simplify inspection and replacement. The head is intended for users seeking durable tooling that integrates into existing machining setups; Metav’s advisers can provide guidance on matching holders and insert grades for specific material requirements. Contact Metav Werkzeuge for tailored advice on Teknik Makina tools, ordering guidance and availability — info@metav-werkzeuge.com · +49 2822 7131930 Technical Data Article number: T167TM Manufacturer: Teknik Makina eClass: 21181015 Measurements Diameter: 100 mm Overall length: 50 mm Arbor diameter: 32 mm Weight: 1.925 kg Number of cutting edges: 8 Cutting angle: 45° Features Torx screw: M5x12 Torx key: T20 SKU: T167TM FAQ What toolholders fit this cutter head? The Teknik Makina planing cutter head (SKU T167TM) is designed for a 32 mm arbor interface and fits holders that accept a 32 mm shank and suitable clamping for face milling operations. Which inserts are compatible with the head? The milling head accepts standard indexable inserts of the matching style; for exact insert geometry and grade recommendations, Metav Werkzeuge can advise on the best option for the intended material and cutting parameters. How is the insert secured and replaced? Inserts are clamped with an M5x12 Torx screw; replacement requires a T20 key. The fixing system is designed for quick changeovers and stable seating under machining loads. Is the head suitable for heavy‑duty facing operations? With its robust 1.925 kg construction and eight cutting edges, the head is intended for intensive facing and light finishing tasks, offering a balance between material removal and surface quality. Can Metav provide help with balancing and setup recommendations? Yes, Metav Werkzeuge offers practical advice on balancing, holder selection and cutting data to integrate the Teknik Makina head into production workflows. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high-capacity face milling solution that combines stable cutting performance, internal coolant routing and straightforward maintenance—optimising throughput and uptime. Order directly via Metav Werkzeuge or consult our specialists for application matching. Face milling head by Teknik Makina — 100 mm diameter, internal coolant Face milling head designed for SNMU 1305 indexable inserts to deliver efficient face milling and finishing in production environments 100 mm diameter for broad face milling Internal coolant for better heat control 8 cutting edges for continuous material engagement Compatible with ISCAR SNMU 1305 inserts Optimised throughput with predictable cutting forces This face milling head combines a 100 mm diameter with a 45° cutting angle and 8 cutting edges to provide consistent material engagement across the cutting path. The geometry reduces instantaneous chip load per insert, which translates into smoother power demand from the machine spindle and fewer vibrations during heavy passes. For production planning this means higher feed rates can be maintained with predictable tool life, reducing unplanned stops and improving overall equipment effectiveness. Coolant-fed design that protects edges and reduces rework Internal coolant routing is integrated to target the cutting zone directly. The presence of internal coolant assists in lowering cutting temperatures and flushing chips away from the pockets, which helps to maintain edge integrity and surface finish between index changes. In practical terms, targeted coolant reduces thermal wear on the inserts and the holder, extending service intervals and decreasing the risk of thermal-related rejects—important for repeatable batch quality. Secure clamping and fast serviceability on the shop floor Assembly and insert changes are simplified: the head uses Torx T20 drive and M5x12 fasteners for repeatable clamping torque. Quick, tool-assisted indexable insert changes reduce downtime and keep maintenance tasks straightforward for line technicians. The cutter’s compact footprint—52 mm overall length and a mass of 1.487 kg—supports rigid mounting while minimising overhang, which helps preserve spindle bearings and improves dimensional stability during long runs. Application fit and handling advantages Designed for SNMU 1305 indexable inserts from ISCAR, the head supports common production tasks such as face milling and step finishing where stable cutting and coolant access are priorities. The stated maximum cutting diameter of 113 mm provides flexibility for slightly larger cut widths when required. The construction and compatibility focus on shops that value rapid insert replacement, consistent surface finish and reduced overall machining cycle times. For precise specification checks or to arrange a purchase of the Teknik Makina face milling head (SKU T237-1TM), contact Metav Werkzeuge for personalised advice and fast supply from Emmerich: eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: T237-1TM Product: Face milling head (Planmesserkopf) Application: for SNMU 1305 indexable inserts Manufacturer: Teknik Makina Label: 100mm Planmesserkopf SNMU 1305 L52mm mit Innenkühlung UID: T237-1TM Dimensions & core data Diameter: 100 mm Maximum cutting diameter: 113 mm Overall length: 52 mm Weight: 1.487 kg Cutting edges: 8 Cutting angle: 45° Design & special features Internal coolant: yes Compatible inserts manufacturer: ISCAR Insert size: SNMU 1305 Torx key: T20 Fasteners: M5x12 FAQ What inserts does this face milling head accept? The head is designed for SNMU 1305 indexable inserts and is compatible with inserts from ISCAR, ensuring straightforward sourcing and interchangeability. Is the cutter head suited to coolant-intensive operations? Yes. The face milling head features internal coolant, which supplies coolant directly to the cutting zone to aid chip evacuation and extend insert life. How many cutting edges does the head support and what is the impact? The tool carries 8 cutting edges, enabling continuous engagement for higher material removal rates and smoother cutting forces compared with fewer-edge solutions. Which drive and fastener types are required for assembly? Assembly and insert clamping use a Torx T20 drive and M5x12 screws, designed for repeatable torque and fast serviceability on the shop floor. What are the key dimensions affecting tool setup? Relevant setup values include a 100 mm diameter, 113 mm maximum cutting diameter, 52 mm overall length, and a weight of 1.487 kg; these influence overhang and spindle load calculations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust face milling solution with a 100 mm diameter body, 45° cutting geometry and secure Torx clamping for reliable series production; order via Metav Werkzeuge or consult the advisors for application support. Face milling head for SNMU 1305 indexable inserts — 100 mm diameter, 45° cutting angle | Teknik Makina A Face milling head designed for SNMU 1305 indexable inserts, engineered to provide stable face milling and reproducible surface quality in workshop and industrial applications Stable 100 mm diameter body for consistent performance Compatible with SNMU 1305 indexable inserts 45° cutting geometry for smooth surface finish Secure clamping with M5x12 Torx screws T20 Higher removal rates with controlled cutting forces The robust 100 mm diameter body combined with a 45° cutting geometry enables efficient material removal while keeping cutting forces moderated; this reduces chatter and extends tool life. With eight cutting edges, the head offers extended service intervals and predictable cycle times, which supports continuous production. The additional mass of 1.487 kg gives mechanical stability, improving finish quality when working at higher feed rates and helping to maintain a constant cutting depth across the machined face. Fast and reliable insert changes for minimal downtime Maintenance and insert replacement are simplified by the use of M5x12 Torx screws and a T20 key, ensuring secure clamping and low risk of cam‑out during tightening. The head accepts SNMU 1305 indexable inserts from common suppliers such as ISCAR, allowing flexible sourcing of grade and geometry for specific materials. The clear interface between head and insert reduces the need for special tooling during service, which shortens machine downtime and keeps the production flow efficient. Repeatable set-up and compatibility with standard arbors A compact overall height of 52 mm and a standard 32 mm arbor interface provide straightforward integration into existing tooling setups and turret systems. The measured balance and defined mounting dimensions facilitate repeatable positioning, shortening set‑up time between batches. This consistency lowers the probability of rework and supports tight tolerance production runs where repeatability and interchangeability are essential. Built for workshop reliability and straightforward inventory management The cutter head’s compatibility with a widely used insert format simplifies inventory and tool management, while the clear technical specification supports predictable procurement and planning. Supplied by a recognised tooling source, the component contributes to a dependable tooling chain and aligns with a workshop strategy that values availability and proven performance. For operations aiming to consolidate suppliers, the head pairs well with established industrial inserts and routine maintenance practices. Contact Metav Werkzeuge today to discuss the Teknik Cutting Tools face milling head (SKU T237TM) and confirm the optimal SNMU 1305 configuration for the intended machining tasks; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: T237TM Name: Face milling head for SNMU 1305 indexable inserts Manufacturer: Teknik Makina Dimensions & weight Diameter: 100 mm Overall height: 52 mm Arbor diameter: 32 mm Weight: 1.487 kg Cutting angle: 45° Number of cutting edges: 8 Features Compatible with SNMU 1305 indexable inserts Suitable for inserts from ISCAR Torx screws M5x12 Torx key T20 ECLASS: 21180902 Files: 64e8a0e77cf48d9e17c0d1df, 64e8a12911e3b4da1987f08a FAQ Which insert type is required for this head? The head is designed for SNMU 1305 indexable inserts; grades and geometries from ISCAR are compatible depending on the workpiece material. What arbor size is needed to mount the head? Mounting requires a 32 mm arbor interface as specified for the unit. How many cutting edges does the head provide? The cutter head carries eight cutting edges, enabling longer intervals between insert changes. Which screw and key are used for clamping? Clamping uses M5x12 Torx screws tightened with a T20 key to ensure secure fixation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust machining solution that combines a 100 mm cutting diameter, integrated coolant delivery and compatibility with XNMX 0606 indexable inserts for reliable face milling. Benefit from reduced changeover time thanks to Torx fastenings and a compact 63 mm overall length — order via Metav Werkzeuge or contact their consultants for application advice. Planing cutter head T738TM — 100 mm diameter with internal coolant, for XNMX 0606 indexable inserts (Teknik Makina) A Planing cutter head T738TM engineered for efficient face milling in production and toolroom environments; compatible with Korloy XNMX 0606 indexable inserts for flexible cutting strategies. 100 mm diameter for broad milling coverage Internal coolant for improved chip evacuation Compatible with XNMX 0606 indexable inserts Ten cutting edges for extended tool life Consistent accuracy and stable cutting performance The design centres on delivering repeatable results in face milling. With a 100 mm diameter and 10 cutting edges, the head provides a large effective cutting circle and balanced load distribution, which reduces vibration and improves surface finish. The 51° cutting angle is configured to offer a compromise between high material removal and fine finish, enabling steady productivity on medium-duty operations. The compact 63 mm overall length enhances rigidity at the spindle, supporting tighter tolerances in serial production. Direct coolant supply to the cutting zone for longer life An internal coolant channel feeds cutting fluid directly to the insert tips, promoting efficient chip evacuation and local cooling at the cutting interface. This reduces thermal stress on both the tool and the workpiece, allowing for more consistent cutting parameters and extended insert life. Compatibility with Korloy XNMX 0606 indexable inserts means standardised stocking and straightforward upgrades to coated grades for aluminium, steel or mixed-material machining, without modifying the tool body. Fast insert changes and shop-floor practicality Maintenance is simplified by the use of Torx fastenings: Torx T15 key access and M4×12.5 screws make insert replacement rapid and repeatable, cutting unproductive downtime. The indexable insert format employed by the head makes multiple cutting edges available from a single insert, reducing consumable costs and inventory complexity. Designed for machining shops, maintenance departments and light production lines, the cutter head supports straightforward integration into existing tool systems and setup routines. For application-specific recommendations, stock availability from Metav Werkzeuge’s Emmerich warehouse, or to arrange a technical consultation on cutting parameters and insert selection, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930 — their specialists will advise on the best configuration for the task at hand Technical data Article number: T738TM Product type: Planing cutter head Manufacturer: Teknik Makina SKU: T738TM Facts Diameter: 100 mm Overall length: 63 mm Cutting edges: 10 Cutting angle: 51° Screw size: M4×12.5 Special features Internal coolant For XNMX 0606 indexable inserts Compatible with Korloy inserts Torx T15 fastenings FAQ What insert type fits this cutter head? The cutter head accepts XNMX 0606 indexable inserts; compatible inserts from Korloy can be used for a range of materials. Is the tool suitable for high-speed machining? The internal coolant supply in the T738TM supports higher cutting speeds by improving heat control and chip evacuation during elevated-speed operations. How are the inserts secured and changed? Inserts are clamped with Torx screws (require a Torx T15 key); the screws are M4×12.5, enabling quick and repeatable changes on the shop floor. Which applications are recommended for this cutter head? The head is intended for face milling, finishing and light roughing in general machining, toolrooms and production lines where standard XNMX 0606 inserts are preferred. What are the main benefits of the internal coolant feature? Internal coolant delivers lubricant and coolant directly to the cutting edge, reducing temperatures, improving chip flow and extending insert life for more consistent production. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a robust combination of high removal rates and precise finish thanks to the 100 mm face milling geometry and internal coolant: a durable choice for reliable production. Order directly via Metav Werkzeuge or contact our consultants for application advice. Planmesserkopf T798-1TM – 100 mm face milling head with internal coolant (Teknik Makina) A Planmesserkopf T798-1TM engineered for efficient face milling using ONMU 0505 indexable inserts, suited to medium- to heavy-duty finishing operations. 100 mm diameter for broad face milling Internal coolant for improved chip evacuation Holds ONMU 0505 indexable inserts (ISCAR) Eight cutters, 45° cutting angle for smooth finish High-efficiency material removal with consistent surface quality The face milling head delivers a measurable gain in throughput by combining a 100 mm diameter with a 45° cutting angle, which reduces cutting forces and promotes a steadier chip flow. The design with 8 cutting edges enables distributed cutting load and extended tool life, translating to fewer toolchanges and reduced machine downtime. For shops aiming to balance cycle time and surface finish, the cutter body’s geometry ensures predictable behaviour across a range of medium-hard materials, making the assembly an effective option for batch and continuous operations. Coolant-through design for secure tool performance The internal coolant channel supports directed coolant delivery at the cutting zone, improving chip evacuation and heat control at the insert rake face. This targeted coolant supply reduces recutting of chips and helps maintain stable cutting temperatures, which is especially beneficial during prolonged cuts or when machining alloys that require thermal control. The result is a more consistent surface quality and prolonged insert lifetime, with the mechanical connection secured by M5x12 Torx screws tightened with a T20 key for straightforward maintenance. Compatibility and practical handling for production use Configured for ONMU 0505 indexable inserts and compatible with ISCAR-type inserts, the head offers flexibility in insert choice to match specific material and finish requirements. The compact profile with a 52 mm overall length and mass of 1.842 kg keeps the assembly stable while remaining easy to install on suitable arbor interfaces. The robust mounting and symmetrical cutter arrangement simplify balancing and contribute to reliable runout performance in milling setups. Application guidance and measurable benefits When applied to typical face-milling tasks, the head’s combination of diameter, cutter count and coolant feed leads to measurable productivity benefits: higher material removal rates with improved surface integrity and fewer rejected parts. The construction supports consistent tool-change intervals and easier process standardisation across several machines, thereby supporting cost-efficiency and reproducible part quality in industrial and subcontracting environments. For product availability, technical compatibility checks or tailored advice on the Teknik Makina face milling head T798-1TM, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to discuss application details and supply options. Technical data Article number: T798-1TM Product type: Planmesserkopf Brand: Teknik Makina Numbers / Core technical data Diameter: 100 mm Overall length: 52 mm Weight: 1.842 kg Cutting edges: 8 Cutting angle: 45° Torx key: T20 Torx screw: M5x12 Special features Internal coolant For ONMU 0505 indexable inserts Compatible inserts manufacturer: ISCAR SKU: T798-1TM FAQ What inserts fit this face milling head? The head is designed for ONMU 0505 indexable inserts and is compatible with inserts from ISCAR, enabling selection of grades and geometries to suit the workpiece material. Is the coolant routed through the tool body? Yes, the unit features internal coolant, which directs coolant to the cutting zone for improved chip evacuation and temperature control. How many cutters does the head accept and what is the cutting angle? The body carries 8 cutting edges and is set up with a 45° cutting angle to balance cutting forces and surface finish. What are the key dimensions and weight for machine setup? Key setup values are: 100 mm diameter, 52 mm overall length, and a mass of 1.842 kg, relevant for balancing and toolholder selection. Which fasteners are used for insert clamping? Inserts are secured with M5x12 Torx screws requiring a T20 key for tightening and removal. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of reliable chip evacuation, stable cutting geometry and straightforward insert service for smooth face-milling performance — order the head directly via Metav Werkzeuge or contact our consultants for specification support. Face milling head T330-1TM for SNKX 1206 indexable inserts — Teknik Makina, 100 mm with internal coolant The face milling head is designed for efficient face-milling with SNKX 1206 indexable inserts and offers internal coolant for improved tool life and surface consistency. Internal coolant for optimised cooling 100 mm diameter for robust material removal Compatible with SNKX 1206 Korloy inserts Eight cutting edges for steady cutting Improved thermal control for longer insert life The integrated internal coolant channel directs cutting fluid precisely to the cutting zone, which reduces heat build-up and assists chip evacuation. This targeted cooling lowers thermal wear on the cutting edges and helps to maintain a consistent cutting geometry under extended cycles, so insert life is extended and production uptime is increased. The coolant-through design is especially beneficial when machining demanding materials, because the cooling effect is delivered where it matters most, improving both tool performance and component surface quality. Consistent surface finish through balanced geometry A diameter of 100 mm combined with 8 cutting edges and a 45° cutting angle provides a favourable balance between material removal and radial forces. The oblique cutting geometry reduces vibration and distributes cutting forces more evenly, which supports a uniform surface finish and dimensionally stable results. The specified max cutting diameter 113 mm and the overall length of 52 mm contribute to a compact tool projection, which further minimises deflection and supports repeatable accuracy in typical face-milling applications. Fast insert changes and secure assembly for production workflows Designed for assembly with M4x12.5 screws and a Torx T15 fit, the holder enables quick and repeatable insert replacement using standard workshop tools. The SNKX 1206-compatible pockets accept Korloy inserts and are arranged to allow straightforward indexing, reducing downtime during maintenance. The head, referenced as T330-1TM, is engineered for integration into existing toolholders and clamping systems, helping to keep tool logistics simple and predictable for machine shops and production lines. For robust, production-ready face milling choose Teknik Makina’s T330-1TM — contact Metav Werkzeuge in Emmerich for expert advice and fast supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T330-1TM Product: Face milling head (Planmesserkopf) Manufacturer: Teknik Makina Label: 100mm Planmesserkopf SNKX 1206 L52mm with internal coolant SKU: T330-1TM Facts Diameter: 100 mm Max cutting diameter: 113 mm Overall length: 52 mm Number of cutting edges: 8 Weight: 1.926 kg Cutting angle: 45° Torx key: T15 Torx screw: M4x12.5 ECLASS: 21181015 Special features Internal coolant: yes Compatible with SNKX 1206 indexable inserts Compatible insert manufacturer: Korloy Product category: Face milling head Application: Face milling / planing operations FAQ What inserts fit this face milling head? The face milling head accepts SNKX 1206 indexable inserts; Korloy inserts in this designation are compatible with the pocket geometry. Does the head supply coolant to the cutting zone? Yes — the T330-1TM is equipped with internal coolant, which delivers fluid directly to the cutting edges to improve cooling and chip evacuation. What is the cutting angle and how does it affect machining? The head uses a 45° cutting angle, which reduces axial cutting forces and promotes smoother surface finishes while helping to control vibration during face milling. Which fastening hardware is required for insert clamping? Insert clamping is performed with M4x12.5 screws tightened using a Torx T15 key, enabling secure and repeatable mounting of the SNKX 1206 inserts. Is the T330-1TM suitable for heavy-duty removal? With a 100 mm diameter, 8 cutting edges and a compact projection, the T330-1TM is intended for robust face-milling tasks where stability and sustained cutting performance are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, performance-oriented solution with 100 mm diameter and internal coolant for reliable face milling. The combination of a short 50 mm overall length and eight cutting edges ensures stable cutting and reduced downtime. Order the face milling head directly via Metav Werkzeuge or consult our advisors for specification matching. Face milling head T346-1TM — 100 mm, internal coolant (Teknik Makina) Face milling head T346-1TM for SNMX 1206 indexable inserts, engineered for productive face milling and quick insert changes in industrial workshops. 100 mm diameter for wide coverage Internal coolant to the insert seats Compatible with SNMX 1206 Korloy inserts Eight cutting edges for continuous cutting Engineered for consistent face milling performance The compact 100 mm diameter cutter body delivers a balanced mix of accessibility and material removal rate, enabling efficient face machining across multiple setups. Built to accept SNMX 1206 indexable inserts, the toolhead provides reliable cutting geometry with an 88° cutting angle, which supports near-flat surface generation and predictable chip flow. The short 50 mm overall length contributes to rigidity, reducing vibration and enhancing surface finish without sacrificing accessibility in constrained fixtures. Internal coolant that extends insert life and consistency Equipped with internal coolant, the head feeds coolant close to the cutting edge to improve cooling and aid chip evacuation. This targeted coolant supply helps maintain cutting-edge stability under load, contributing to longer insert life and fewer unplanned changeovers. For operations that prioritise throughput, the coolant feature reduces thermal variation at the cutting zone and supports consistent cycle times across batch production. Fast insert changes and secure fastening for production shops The modular design accepts SNMX 1206 inserts from the listed supplier and relies on standard fastenings for quick maintenance: the head uses M4x12.5 Torx screws secured with a T15 key. The arrangement minimises downtime during regripping or insert replacement and ensures repeatable seating of the inserts. With eight cutting edges distributed around the body, one indexed tool change can restore cutting capability rapidly, supporting tight production schedules. Practical benefits for workshop and production environments This machining head is suited to repetitive face milling tasks where reliability and quick serviceability matter. The compact construction and internal coolant lower the risk of thermal distortion, while compatibility with widely available SNMX 1206 inserts simplifies tooling logistics. The overall design supports a predictable production flow, helping to reduce the number of tool variants required on the shop floor and streamlining maintenance routines. For robust, coolant-fed face milling from Teknik Makina, contact Metav Werkzeuge to order the T346-1TM or to request application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: T346-1TM Label: 100 mm face milling head SNMX 1206 L50 mm with internal coolant Product type: Face milling head Manufacturer: Teknik Makina Facts Diameter: 100 mm Total length: 50 mm Weight: 1.688 kg Cutting edges: 8 Cutting angle: 88° Special features Internal coolant: yes Compatible inserts: SNMX 1206 (Korloy) Fastening screw: M4x12.5 Torx key: T15 FAQ Which indexable inserts are compatible with this milling head? The face milling head accepts SNMX 1206 indexable inserts; compatibility is confirmed for Korloy inserts and standard SNMX 1206 geometries. Is there coolant delivery to the cutting edge? Yes, the T346-1TM features internal coolant to improve cooling and chip evacuation at the insert seats. How many cutting edges does the tool provide and what is the cutting angle? The tool body offers eight cutting edges and an 88° cutting angle for near-flat face milling and sustained cutting engagement. Which screws and key are required for insert fastening? Insert retention uses M4x12.5 Torx screws tightened with a T15 Torx key for secure and repeatable seating. What are the main dimensions and the weight of the head? The head has a 100 mm diameter, a 50 mm total length and a mass of 1.688 kg, designed for a compact and rigid setup. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine stable mounting and broad compatibility with a 90° cutting angle and a 32 mm shank for consistent corner turning performance; the robust Torx M3x7 fastening and eight cutting edges support quick tool changes and reliable repeatability. Order the corner turning head directly via Metav Werkzeuge or ask our consultants if needed Corner turning head T220TM — 90° cutting angle, for ADMT 1204 indexable inserts (Teknik Makina) Corner turning head T220TM designed for precise external corner turning and finishing operations on lathes and turning centres 90° cutting angle for precise corner turning Compatible with ADMT 1204 indexable inserts 32 mm shank diameter for secure mounting Torx M3x7 fastening with T8 key for quick changes Precise cutting geometry for consistent component quality The corner turning head delivers repeatable results through its defined 90° cutting angle and compact geometry. A defined cutting angle simplifies set-up and reduces adjustment time, which in turn improves process stability for batch and single-part production. The slightly massed construction (approx. 1.595 kg) contributes to vibration damping during cuts, so finishing runs show fewer tool marks and more predictable tool life. This combination of defined geometry and mass supports a measurable increase in process reliability and surface quality. Rapid insert changes and dependable clamping for less downtime Designed for ADMT 1204 indexable inserts, the turning head accepts standard insert formats to ease stock and logistics management. The clamping uses a Torx M3x7 screw tightened with a T8 key, enabling secure retention and straightforward exchange during shift work. With eight effective cutting edges on the insert, the system extends time between maintenance intervals and reduces overall tooling consumption. These features translate into shorter set-up times and a lower cost-per-part in routine turning applications. Easy integration and workshop compatibility for flexible machining With a 32 mm shank diameter and a head diameter of 100 mm, the toolholder integrates cleanly into established toolposts and turret systems; the compact 52 mm overall length allows close clearance where space is limited. Compatibility with Walter-type indexable inserts supports supply chain flexibility and replacement simplicity. Supplied material and mounting specifications make the head a practical choice for workshops seeking to standardise tooling without sacrificing performance. Metav’s European distribution from Emmerich ensures straightforward procurement and dependable supply when scaling up production. Contact Metav Werkzeuge for specific batch quantities or integration advice on the T220TM corner turning head — call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored technical guidance and delivery from Emmerich Technical data SKU: T220TM Name: Eckmesserkopf (corner turning head) Manufacturer: Teknik Makina Facts Shank diameter: 32 mm Head diameter: 100 mm Overall length: 52 mm Cutting edges: 8 Cutting angle: 90° Weight: 1.595 kg Compatible inserts: ADMT 1204 Special features Torx screw: M3x7 Torx key size: T8 Compatible with Walter indexable inserts Brand: Teknik Makina FAQ Is this head compatible with ADMT 1204 inserts? Yes. The corner turning head T220TM is designed specifically for ADMT 1204 indexable inserts and clamps them securely for external corner turning. What shank diameter is required for mounting? The holder requires a 32 mm shank mounting interface; the shank diameter is listed as 32 mm in the technical data. How many usable cutting edges are available per insert? The design supports inserts with a total of eight cutting edges, extending time between changes and reducing tooling costs. Which screw and key are used for the insert clamp? The insert is secured with a Torx M3x7 screw and adjusted using a T8 Torx key for fast and reliable clamping. Is the tool suitable for close‑quarter machining where space is limited? Yes. With an overall length of 52 mm and a head diameter of 100 mm, the holder is compact enough for tight clearances while maintaining rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com