Gibt es einen Hahn und Kolb Online Shop?

Robust 90° corner tool head with a 100 mm head diameter and 32 mm shank bore to secure LNMX 1510 indexable inserts; the design combines stable cutting performance with quick, repeatable insert clamping. Order the component via Metav Werkzeuge or request tailored integration advice from our specialists. Corner tool head T378TM — indexable insert holder with 90° cutting angle (Teknik Makina) Corner tool head T378TM for precision corner turning and facing with LNMX 1510 indexable inserts on industrial turning equipment 90° cutting angle for precise corner cutting Compatible with LNMX 1510 indexable inserts 100 mm head diameter for increased stability Torx screw M4x12.5 with T15 key specification Consistent corner geometry for reliable part quality The design delivers a 90° cutting angle that ensures repeatable corner profiles and predictable tool path planning. A larger 100 mm head diameter reduces deflection under load, which improves surface finish and reduces scrap rates in serial production. With a measured weight of 1.644 kg and a compact overall length of 52 mm, the head balances mass for rigidity without excessive overhang, supporting stable machining during short- and medium-run operations. Fast, repeatable clamping to shorten set-up times Clamping is driven by a Torx M4x12.5 fixing that corresponds to a T15 key size, offering secure, consistent tightening torque and simple maintenance routines. The standardised screw interface reduces the risk of incorrect tightening and helps to shorten changeover time between inserts. Use of common fastening hardware assists workshops in maintaining predictable set-ups and minimises downtime associated with insert replacement. Broad compatibility to simplify inventory and sourcing The holder is specified for LNMX 1510 indexable inserts and lists compatibility with major suppliers such as ISCAR, Korloy, LMN and YG-1, enabling flexible procurement and reduced stocking pressure. Multi-brand compatibility supports cost optimisation by allowing alternative insert suppliers to be used without altering the toolholder, which benefits purchasing and production planning in mixed-brand environments. Engineered for stable cutting and dependable service life With eight designated cutting edges and a robust interface, the component is engineered to damp vibration and maintain cutting geometry across repeated cycles. The 32 mm shank bore (aufnahme) ensures a secure fit in standard toolmounts while the compact overall length of 52 mm keeps overhang minimal. The result is a component that supports consistent cycle times and predictable tool change intervals in precision turning applications. Contact Metav Werkzeuge today to discuss how the Teknik Makina corner tool head T378TM with its 90° cutting geometry can be integrated into the existing toolset — call +49 2822 7131930 or email info@metav-werkzeuge.com to request advice or a customised parts list Technical data Article number: T378TM Manufacturer: Teknik Makina Designation: Corner tool head for LNMX 1510 indexable inserts ECLASS: 21181015 Core data Diameter: 100 mm Shank bore (aufnahme): 32 mm Overall length: 52 mm Weight: 1.644 kg Cutting angle: 90° Cutting edges: 8 Features Torx screw: M4x12.5 Torx key size: T15 Compatible with insert manufacturers: ISCAR, Korloy, LMN, YG-1 For LNMX 1510 indexable inserts FAQ Is the corner tool head compatible with LNMX 1510 inserts from different suppliers? The Corner tool head T378TM accepts LNMX 1510 indexable inserts and is compatible with manufacturers such as ISCAR, Korloy, LMN and YG-1, allowing use of equivalent insert grades from those suppliers. Which screw and key size are required for secure clamping? The Teknik Makina corner tool head T378TM uses a Torx M4x12.5 screw and requires a T15 key for correct tightening and repeatable clamping. What are the critical dimensions for toolholder mounting? Corner tool head T378TM specifies a 32 mm shank bore (aufnahme) and an overall length of 52 mm; the head diameter is 100 mm for enhanced stability. How many cutting edges does the holder support and what does that mean for productivity? The component features 8 cutting edges, enabling extended service intervals and stable cutting performance which contributes to predictable cycle times in serial machining. For which machining tasks is the holder best suited? The Corner tool head T378TM is designed for corner turning and facing operations where a 90° cutting angle and high positional stability are required to achieve precise corner radii and consistent surface finish. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid 32 mm shank and a true 90° cutting angle to produce consistent square shoulders with fewer setups; the unit’s compatibility with APKT 1604 indexable inserts reduces tooling complexity and simplifies spare-part management. Order the head directly via Metav Werkzeuge or contact the consultants for application guidance. Eckmesserkopf — indexable angle head for APKT 1604 inserts, 90° cutting angle (Teknik Makina) The Eckmesserkopf is a compact indexable angle head designed for machining with APKT 1604 indexable inserts, offering a 90° cutting geometry and a 32 mm shank for stable mounting in standard holders 90° cutting angle for square shoulders Compatible with APKT 1604 indexable inserts Ø 100 mm head diameter 32 mm shank for standard toolholders Increased throughput from stable cutting geometry The angle head’s 90° cutting angle and substantial Ø 100 mm head deliver a predictable cutting direction beneficial for shoulder and face operations. This stable geometry reduces vibration and improves surface finish, which in turn diminishes rework and inspection times. Built for production runs, the assembly’s mass and form factor support consistent chip formation and tool life extension through controlled cutting forces. Practical handling and quick servicing for less downtime Designed with serviceability in mind, the head secures inserts with a Torx M4x10 screw and accepts a T15 key, enabling quick insert changes and repeatable clamping torque. Compatibility with Korloy APKT 1604 inserts lowers stocking requirements and speeds up replenishment cycles. The compact 52 mm overall length and clearly defined clamping interface make replacement simple, so machine availability is maximised and downtime is minimised. Robust construction for workshop reliability The component’s mass of 1.057 kg and the 32 mm shank combine to provide rigidity at the toolholder interface, improving cutting stability for demanding operations. The configuration supports seven cutting edges, which contributes to extended service life between regrinds or replacements and helps maintain consistent tolerances across batches. For plants seeking predictable performance from indexable tooling, the head is an efficient addition to a modular tooling strategy. Contact Metav Werkzeuge for precise application advice, reference Teknik Makina T188TM and arrange rapid delivery from our Emmerich warehouse via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number / SKU: T188TM Manufacturer: Teknik Makina Product name: Eckmesserkopf for APKT 1604 indexable inserts Torx screw: M4x10 Torx key: T15 Facts Head diameter: 100 mm Shank diameter (d): 32 mm Total length: 52 mm Weight: 1.057 kg Cutting angle: 90° Cutting edges: 7 Special features Compatible with APKT 1604 indexable inserts Suitable for inserts from Korloy Compact design for standard toolholders Quick-change insert clamping with Torx screw FAQ Which inserts fit this angle head? The angle head accepts APKT 1604 indexable inserts; it is specified for APKT 1604 geometry and is compatible with Korloy inserts as noted for Teknik Makina item T188TM. What shank size is required for mounting? A 32 mm shank diameter is specified for this head; the 32 mm dimension ensures compatible seating in standard holders and maintains rigidity during machining. How are the inserts secured and what tool is needed? Inserts are secured with a Torx M4x10 screw; a T15 Torx key is recommended for correct clamping and repeatable torque during insert changes. Is the head suitable for shoulder and face machining? Yes — the 90° cutting angle and robust head diameter are designed to produce square shoulders and face cuts with consistent surface quality using APKT 1604 inserts. Teknik Makina: Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine the 90° cutting geometry, a 32 mm shank and compatibility with LNGU 15T6 indexable inserts to achieve repeatable corner turning and reduced setup times—order the component directly via Metav Werkzeuge or request technical advice from our consultants. Corner tool head by Teknik Makina — 90° cutting angle, for LNGU 15T6 indexable inserts A corner tool head engineered for precise external turning and cornering using LNGU 15T6 indexable inserts in standard 32 mm toolholders. 90° cutting angle for precise corner turning Compatible with LNGU 15T6 indexable inserts 32 mm shank diameter for common toolholders Secured with M4x11 Torx screw (T15) Built for precise geometry and consistent finishes The turning head is built around a 90° cutting angle, which keeps the cutting forces predictable and the tool path stable during cornering and profiling operations. Matching the geometry to the insert type—LNGU 15T6—ensures that each indexable face presents identical cutting geometry, so surface finish and dimensional repeatability are improved across batches. The design reduces the need for corrective rework and supports efficient production cycles by maintaining consistent edge engagement and chip control. Secure clamping and compact footprint for fast changeovers Mounting reliability is delivered via an M4x11 Torx screw tightened with a T15 drive, providing high clamping security for the insert seat without complex fixtures. The 32 mm shank offers a rigid connection to common toolholders, limiting deflection in interrupted cuts, while the compact overall length of 50 mm and a head diameter of 100 mm keep the assembly accessible in confined turning envelopes. The robust mass (approx. 1.933 kg) contributes to damping of vibration, improving both tool life and component quality during higher feed operations. Compatibility, workshop benefits and application focus Designed for indexable turning with LNGU 15T6 inserts and compatible with Kennametal insert geometries, the head suits operations such as corner turning, external profiling and small-step chamfering. Using an indexable insert system reduces tooling downtime and cost per edge compared with solid tooling, while the replacement routine is straightforward when the insert seat is secured by the Torx screw. The compact head supports versatile workshop deployment where space and changeover speed matter, helping to centralise tooling choices and streamline inventory. Contact Metav Werkzeuge for a tailored integration plan or to request a technical quote for the Teknik Makina corner tool head T961TM Technical data Article number: T961TM Manufacturer: Teknik Cutting Tools Brand: Teknik Makina Suitable for indexable inserts: LNGU 15T6 Compatible insert manufacturer: Kennametal Facts Shank diameter: 32 mm Head diameter: 100 mm Cutting angle: 90° Number of cutting edges: 8 Overall length: 50 mm Weight: 1.933 kg Special features Secured with M4x11 Torx screw Torx key size: T15 Designed for indexable turning and corner machining Compact design for confined tool envelopes FAQ Which insert type fits this tool head? The head is designed for LNGU 15T6 indexable inserts, compatible with Kennametal-style geometries. What shank diameter is required for the toolholder? A 32 mm shank diameter is required; the head mounts into standard 32 mm toolholders. How is the insert secured in the tool head? The insert seat is clamped using an M4x11 Torx screw tightened with a T15 drive for secure and repeatable fixing. What operations is this head best suited for? Best suited for corner turning, external profiling and small chamfering tasks where a 90° cutting geometry is required. What is the article number for ordering and reference? Refer to article number T961TM when enquiring or ordering the corner tool head. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high-stability turning head with a 90° cutting geometry and broad compatibility with LNGX 1307 indexable inserts; ideal where repeatable cornering and quick insert changes reduce cycle time. Order directly via Metav Werkzeuge or consult their specialists for application-specific guidance. Corner turning head T494TM – Indexable head for LNGX 1307 inserts, 90° cutting angle (Teknik Makina) The Corner turning head is a precision indexable head designed for cornering, facing and short-turn operations where stable clamping and reproducible geometry are essential Robust head for LNGX 1307 indexable inserts 90° cutting angle for precise corner operations 100 mm head diameter for stable cutting Torx M4x10 screw, T15 key required Greater process stability through compact geometry The head's Ø100 mm construction and 32 mm mounting diameter deliver a rigid connection to the tool post, reducing vibration and improving surface quality in interrupted and finishing cuts. The 90° cutting angle concentrates forces predictably, which supports consistent cycle times and reduces the need for rework. For workshop managers and CNC programmers, the result is fewer tool-related stoppages and a predictable machining outcome that aids planning and cost estimation. Fast insert changes and secure clamping for continuous production Designed for LNGX 1307 indexable inserts and compatible with inserts from Walter, the head ensures quick, repeatable indexation. Clamping is effected with a Torx M4x10 screw (requires a T15 key), so insert replacement is straightforward and tool life is maximised through correct seating. The head features seven cutting edges, allowing multiple repositions before replacement and reducing tooling consumption. This configuration supports efficient shift handovers and shorter maintenance windows. Application scope and workflow advantages With an overall length of 50 mm and a mass of 1.542 kg, the tool head is suited to medium-duty turning, cornering and facing operations on conventional and CNC lathes where compactness and repeatability matter. Compatibility with standard indexable inserts simplifies procurement and inventory: workshops can rely on common insert stocks while benefiting from the head's stable geometry. The combination of mechanical simplicity and standardised components makes this a pragmatic choice for production and job-shop environments seeking reliable throughput. For precise cornering with dependable clamping, choose Teknik Makina's Corner turning head and contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich. Technical data Article number: T494TM Manufacturer: Teknik Makina Designation: Corner turning head For: LNGX 1307 Indexable Inserts Numbers / Core technical data Head diameter: 100 mm Mounting diameter: 32 mm Overall length: 50 mm Weight: 1.542 kg Cutting angle: 90° Cutting edges: 7 Designs / Special features Suitable for Walter inserts Torx M4x10 screw T15 Torx key required Indexable insert system Compact, rigid geometry FAQ Which indexable inserts fit this head? The corner turning head is designed for LNGX 1307 indexable inserts and is compatible with inserts produced by Walter, ensuring standardised replacement and simple procurement. What clamping hardware is needed for insert changes? Insert clamping uses a Torx M4x10 screw; a T15 Torx key is required to secure and release the insert safely. Is the head suitable for CNC lathe operations? Yes, the compact geometry, Ø100 mm head diameter and 32 mm mounting diameter make it well suited to CNC and conventional lathe applications requiring stable cornering and facing. How many cutting positions are available before insert replacement? The assembly provides seven cutting edges, allowing multiple indexations per insert to extend service life and reduce tooling costs. Can the head be used for heavy roughing? The head is optimised for cornering, facing and medium-duty turning; for heavy roughing, tool selection should consider cutting forces and machine rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, precision-engineered solution that combines a 90° cutting angle with compatibility for WNMU 0806 indexable inserts, ensuring consistent shoulder turning and reliable repeatability. Order directly via Metav Werkzeuge or contact our consultants for application-specific advice. Angle tool head T546TM — Indexable insert holder for WNMU 0806, 90° cutting angle (Teknik Makina) The Angle tool head T546TM is an indexable insert holder designed for precise shoulder turning and external profiling, accepting WNMU 0806 inserts for industrial turning applications For WNMU 0806 indexable inserts 90° cutting angle for shoulder turning 32 mm tool shank diameter Torx M5x12 screw, T20 key required Stable geometry for consistent shoulder turning The holder’s defined 90° cutting angle and compact geometry deliver a repeatable contact position that stabilises each pass. With a 32 mm shank interface and a 100 mm head diameter, the unit is balanced to reduce vibration and improve tool life. The relatively modest overall length of 50 mm contributes to stiffness at the cutting zone, while the assembled mass of 1.36 kg helps dampen chatter during interrupted cuts. These attributes translate into more predictable component tolerances and fewer rejects in serial production Fast insert changes and broad insert compatibility Engineered for shops that value throughput, the tool accepts WNMU 0806 indexable inserts and is compatible with Kyocera plates, enabling straightforward standardisation across toolrooms. Fixing is performed with a Torx M5x12 screw and a T20 key, permitting quick insert replacement and minimised setup time. The clear interface reduces the risk of incorrect seating; as a result, changeover routines are faster and nightly tool-change windows are more predictable Robust design that reduces downtime A straightforward clamping concept and durable construction contribute to reduced downtime and stable machining cycles. The solid mechanical fixation and compact head geometry lower the need for frequent readjustment, which benefits continuous production environments. Where tool reliability is critical, this indexable insert holder supports sustained operation and predictable maintenance intervals, aligning with lean manufacturing demands Practical fitment and machining scope Ideal for shoulder turning, profiling and facing operations on conventional and CNC lathes, the holder functions as a practical addition to existing tool portfolios. The design focuses on dependable performance with industry-standard insert sizes, making it suitable for workshops seeking to streamline tooling stocks. For complex setups or unusual spindles, technical advice is available to ensure optimal integration into the machining process Contact Metav Werkzeuge for tailored application advice and to arrange supply of the Teknik Makina T546TM angle tool head directly from our Emmerich centre Technical data Article number: T546TM Manufacturer: Teknik Makina Description: Angle tool head for WNMU 0806 indexable inserts Facts Shank diameter: 32 mm Head diameter: 100 mm Cutting angle: 90° Number of cutting edges: 6 Overall length: 50 mm Weight: 1.36 kg Torx screw: M5x12 Torx key: T20 Special features Compatible inserts: WNMU 0806 Compatible insert manufacturer: Kyocera Indexable insert holder design Suitable for shoulder turning and external profiling FAQ Which insert type fits this holder? The holder accepts WNMU 0806 indexable inserts, making it compatible with common industrial insert geometries Is the holder compatible with Kyocera inserts? Yes, the T546TM is listed as compatible with Kyocera WNMU 0806 inserts for standardised tool setups What tool is required for fixing the insert? Assembly uses a Torx M5x12 screw tightened with a T20 key for secure clamping Which operations is the holder best suited for? The unit is optimised for shoulder turning, facing and external profiling on lathes and CNC turning centres Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust build quality, a 90° cutting angle and a compact Ø 100 mm body to improve stability and reduce vibration during radial turning operations; order directly via Metav Werkzeuge or consult their technical team for application matching. T645TM Angle tool head by Teknik Makina — for ANHX 1206 indexable inserts, Ø 100 mm An T645TM angle tool head engineered for 90° turning tasks and compatible with ANHX 1206 indexable inserts, ideal for integration into CNC tool magazines and quick-change systems Ø 100 mm body diameter 90° cutting angle for radial operations Compatible with ANHX 1206 inserts (Palbit) Secure M3.5×8.5 Torx clamping Increased rigidity and consistent cutting performance The large Ø 100 mm diameter and compact overall length of 50 mm give the tool head a low overhang and a stiff mounting interface, which translates into more consistent chip formation and reduced chatter. With a 32 mm shank diameter for the clamping area and a mass of 1.761 kg, the component provides a stable platform for heavy intermittent cuts where rotary stability matters. The 90° configuration is particularly effective for radial facing and shoulder turning, because the geometry keeps cutting forces close to the spindle centre and minimises deflection for repeatable part tolerances. Rapid insert changes and secure clamping for minimal downtime Designed specifically for ANHX 1206 indexable inserts and recommended for Palbit grades, the head simplifies maintenance by using a single Torx clamping system. The clamping screw specification M3.5×8.5 (Torx T15) ensures a reliable, repeatable seat for each insert index; the fixed screw interface reduces the risk of incorrect tightening compared with multi-fastener systems. Quick indexing of the inserts means reduced tool-change time in batch production, supporting higher machine utilisation without compromising on cutting stability. Practical versatility for workshop and production use With 12 cutting edges available via indexable inserts and a true 90° cutting orientation, the tool head suits a range of conventional turning operations where radial cuts and facing are required. The compact dimensions enable installation in tighter turret pockets and on smaller lathes while still offering the mechanical integrity expected in industrial environments. The unit’s standardised insert interface streamlines supply chain handling and keeps tooling costs predictable by using established insert formats. Durable design tuned for industrial workflows The component’s construction focuses on serviceability and long-term fit in a production setting: a standardised 32 mm interface diameter and common Torx key size support easy assembly and torque control during reconditioning or replacement. The robust mass distribution and short overhang minimise wear progression on both holders and machine spindles, contributing to longer maintenance intervals. Documentation and parts traceability are straightforward thanks to the clear SKU labelling and standardised insert compatibility, which aids inventory management in busy workshops. For procurement or technical matching of the Teknik Makina T645TM angle tool head please contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange delivery and integration advice. Technical data Article number: T645TM Manufacturer: Teknik Makina Product: Eckmesserkopf for ANHX 1206 indexable inserts Dimensions & weight Diameter: 100 mm Overall length: 50 mm Shank / clamping diameter (D): 32 mm Weight: 1.761 kg Cutting angle: 90° Cutting edges: 12 Features & compatibility Compatible with ANHX 1206 indexable inserts Recommended insert manufacturer: Palbit Clamping screw: M3.5×8.5 (Torx) Torx key: T15 FAQ Which inserts fit this angle tool head? The angle tool head accepts ANHX 1206 indexable inserts; Palbit grades are recommended for standard workshop applications and are listed under the compatibility data. What is the effect of the 90° cutting angle in practice? A 90° cutting angle keeps cutting forces radial to the spindle, which reduces tool overhang effects and improves stability for facing and shoulder turning operations using the T645TM holder. How is the insert secured and which key is required? Inserts are secured with a single clamping screw M3.5×8.5, tightened with a T15 Torx key to ensure repeatable seating and straightforward replacement. Can the head be mounted in standard turrets? The holder’s 32 mm clamping diameter and compact 50 mm overall length make it suitable for many turret pockets and quick-change adaptations where space is limited. How many indexings are possible before replacement? Indexing frequency depends on cutting conditions and insert grade; the head accommodates the standard number of edges for ANHX 1206 inserts, effectively extending run time by enabling multiple index positions Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise cutting capacity and quick insert changes for reliable milling throughput; the 100 mm diameter and compatibility with CCMT 0602 inserts ensure efficient material removal and straightforward maintenance. Order the DF160TM directly via Metav Werkzeuge or consult our specialists for application advice. DF160TM — Indexable disc cutter, 100 mm diameter, 32 mm arbor (Teknik Makina) The DF160TM is an indexable disc cutter designed for medium‑duty milling and slotting operations, engineered to accept CCMT 0602 inserts for rapid tool reconditioning in workshop and production environments 100 mm diameter for broad milling passes 32 mm arbor for firm toolholder connection Accepts CCMT 0602 indexable inserts 12 teeth with 8 mm cutting height Faster material removal with predictable chip control The disc cutter delivers consistent performance during face and slot milling thanks to its 100 mm diameter and 12 teeth, which combine to increase the effective cutting surface and reduce the number of passes required. Using indexable inserts means that worn cutting edges can be replaced in seconds, restoring cutting geometry without regrinding; this keeps machine downtime to a minimum and improves overall equipment effectiveness. The design supports steady chip evacuation and helps maintain cut quality across longer production runs, so milling cycles run more predictably and with fewer interruptions. Secure mounting and easy insert fixation for reduced setup time A 32 mm arbor gives a robust connection to standard toolholders, reducing runout and improving stability at the cutting edge. Insert retention is achieved with a Torx screw M2.5x7, tightened with a T08 key, which ensures a reliable clamp force for repeatable positioning of each insert. The tool’s compact mass (approx. 0.365 kg) facilitates quick handling and makes tool changes less strenuous for operators; replacement of individual inserts rather than the whole cutter minimises consumable costs and simplifies stock management. Versatile use and straightforward maintenance for production environments Engineered to take CCMT 0602 indexable inserts, the cutter is suited to a range of medium‑hard materials when paired with appropriate grades and geometries of insert, making it a practical choice for small batches and flexible workshops alike. The 8 mm cutting height supports modest axial engagement while maintaining chip control and surface finish. Routine upkeep is limited to insert replacement and periodic inspection of the Torx fasteners, allowing maintenance schedules to remain lean and predictable and supporting continuous operation in a manufacturing setting. For dependable milling performance choose the Teknik Makina DF160TM with its 100 mm cutting diameter — contact Metav Werkzeuge for expert guidance and reliable supply from Emmerich. Technical data Article number: DF160TM Manufacturer: Teknik Makina Product: Indexable disc cutter Numbers / Core technical data Diameter: 100 mm Arbor / shank diameter: 32 mm Cutting edges / teeth: 12 Cutting height: 8 mm Weight: 0.365 kg Design / Special features For CCMT 0602 indexable inserts Torx screw M2.5x7; Torx key T08 Designed for disc milling and slotting operations FAQ Which inserts fit this cutter? The DF160TM is designed for CCMT 0602 indexable inserts; selecting the appropriate grade and geometry will depend on the material and cutting strategy. What arbor size is required? The cutter uses a 32 mm arbor / shank diameter for a secure connection to compatible toolholders. How many cutting edges and what cutting height does it have? This disc cutter features 12 teeth and an 8 mm cutting height for efficient material removal and good chip control. Is the tool suitable for CNC machining? Yes, the DF160TM is suitable for CNC and manual milling environments where indexable insert technology and quick insert changes benefit production flow. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of consistent machining performance, simple insert compatibility and secure clamping for reliable small-batch production. Order directly via Metav Werkzeuge or consult the team for setup and insert recommendations. Teknik Makina Disc Cutter DF096TM — 100 mm diameter, for SCMT 1204 inserts The Teknik Makina Disc Cutter DF096TM is an indexable milling cutter for peripheral and slotting operations, designed to accept SCMT 1204 inserts and to be mounted with a 32 mm bore for workshop and CNC applications 100 mm diameter for wide cuts Accepts SCMT 1204 indexable inserts Eight cutting edges for balanced removal 32 mm bore with secure M5x12 Torx fixing Increased productivity through balanced cutting geometry The DF096TM disc tool uses a 100 mm diameter and eight cutting edges, which spreads chip load and reduces the number of passes required for many milling tasks. The combination of multiple indexable seats and a 16 mm cutting height enables deeper engagement per pass where the machine and process allow, improving material removal rates. For production environments that prioritise throughput, the disc design helps maintain stable cutting conditions and consistent surface quality across repeated cycles. Secure clamping and easy insert handling for reduced downtime A robust mounting interface with a 32 mm bore and retention via M5x12 Torx screws (Torx key T20) simplifies fixture alignment and repeatable repositioning. The secure fastenings reduce micro-movement in the holder, limiting vibration and uneven wear on both the insert and the spindle. At a nominal mass of 0.353 kg, the cutter is straightforward to handle during tool changes, while the indexable insert concept keeps maintenance quick: worn edges are replaced rather than the whole cutter, cutting service time and consumable costs. Practical insert choices and machining guidance for consistent results The cutter is specified for SCMT 1204 inserts; selecting a suitable grade and chipbreaker for the workpiece and machining conditions will determine longevity and finish. For example, a tougher carbide grade favours interrupted cuts and heavier feed, while a coated grade can extend life under elevated temperatures. Feed and speed should be tuned to the machine capability and the chosen insert; starting from conservative parameters and increasing to process limits ensures safe optimisation. When in doubt about matching insert geometry or cutting data, the Metav Werkzeuge consultancy can advise on grades and feeds to align with production goals. Contact Metav Werkzeuge for tailored setup advice on the Teknik Cutting Tools DF096TM, insert selection and mounting specifications — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: DF096TM Manufacturer: Teknik Makina Product: Disc cutter Diameter: 100 mm Cutting edges: 8 Insert type: SCMT 1204 Cutting height: 16 mm Bore / mounting diameter: 32 mm Torx screw: M5x12 (T20) Weight: 0.353 kg Numbers / Core technical data Diameter: 100 mm ap_mm: 24 Cutting height: 16 mm Bore: 32 mm Number of edges: 8 Weight: 0.353 kg Special features Indexable insert system (SCMT 1204) M5x12 Torx screw clamping, T20 key Balanced, multi-edge design Compact, workshop-friendly mass FAQ Which insert type fits this cutter? The cutter accepts SCMT 1204 indexable inserts; use the correct grade for the application to achieve the desired wear resistance and surface finish. What is the mounting diameter required? Mounting requires a 32 mm bore; secure the cutter with the specified M5x12 Torx screws tightened using a T20 key. How many cutting edges does the cutter provide? The tool is equipped for eight cutting edges, allowing even chip distribution and stable cutting behaviour when assembled correctly. Is the cutter suitable for quick insert replacement? Yes, the indexable system permits rapid edge changes without removing the entire tool body, reducing machine downtime. What is the cutting height and why does it matter? The 16 mm cutting height defines the maximum axial engagement of the inserts and helps determine suitable depth of cut per pass for process planning. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of extended reach, a secure M8 screw-in connection and compact weight to improve milling accessibility without compromising rigidity; order the extension directly via Metav Werkzeuge or consult our specialists for fit verification. Extension for Screw-in Cutters VT503TM — M8 thread, 100 mm overall length A Extension for Screw-in Cutters designed to extend tool reach and adapt screw-in milling cutters for operations requiring a 16 mm shank interface M8 thread for secure screw-in connection 100 mm overall length for extended reach 16 mm shank diameter compatible with standard holders 30 mm conical seat for precise centring Greater reach with maintained rigidity This extension provides an efficient way to access recessed features without sacrificing tool stability. The combination of a 100 mm overall length with a 16 mm shank preserves the balance between reach and lateral rigidity, reducing chatter in shallow pockets. The M8 thread and the 30 mm conical seat ensure a secure fit with screw-in cutters, which keeps the cutting edge concentric and repeatable across tool changes. The design is aimed at workshop environments where precise positioning and consistent cutting results are required. Compatibility that speeds up workflows Designed for straightforward integration into standard tool holdings, the adapter shortens setup time and supports faster changeovers. The 14 mm opening for the screw-in cutter and the 16 mm shank diameter match common holder specifications, enabling compatibility with a wide range of screw-in milling cutters. The unit’s lightweight construction (approx. 0.15 kg) minimises added inertia, facilitating quick tool changes while maintaining the spindle’s responsiveness. For production runs where uptime matters, this extension contributes to measurable efficiency gains. Precision alignment for reliable machining Accurate machining depends on consistent alignment; the extended conical engagement and secure M8 thread help to maintain concentricity between tool and spindle under load. That stability translates into cleaner surface finishes and reduced rework for components milled in confined areas. The component is suitable for use in both manual and CNC milling contexts where a screw-in cutter requires additional reach. For project planning, refer to the technical data below to verify dimensions and intended applications before integration into a machine setup. Choose Teknik Makina’s VT503TM extension for reliable extra reach — contact Metav Werkzeuge for purchase and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VT503TM Manufacturer: Teknik Makina Designation: Extension for screw-in cutters Facts Overall length: 100 mm Shank diameter: 16 mm Cutter opening diameter: 14 mm Conical seat length: 30 mm Weight: 0.15 kg Thread: M8 Special features For screw-in milling cutters Conical seat for precise centring Lightweight design for reduced inertia Compact extension for recessed machining FAQ What thread does the extension use? The extension is fitted with an M8 thread for screw-in cutters, ensuring a secure mechanical connection with compatible tooling. Which shank diameter is required for the holder? The holder must accept a 16 mm shank; the extension’s shank diameter is 16 mm and the cutter-opening diameter is 14 mm. Is the VT503TM suitable for CNC applications? Yes, the VT503TM extension from Teknik Makina is suitable for CNC and manual milling where additional reach and maintained concentricity are needed. How much additional reach does the extension provide? The component adds an overall length of 100 mm, with a 30 mm conical engagement to maintain alignment under load. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact extension that combines M10 thread security, a 20 mm shaft for stability and a 100 mm overall reach to maintain machining accuracy in confined setups — order the Teknik Makina extension via Metav Werkzeuge or consult our advisers for application guidance. Extension for screw-in milling cutters — 100 mm, M10 thread (Teknik Makina) The Extension for screw-in milling cutters is a threaded extension rod for use with thread-mounted milling cutters, designed to increase reach while retaining concentricity and stability in milling and CNC operations. M10 thread for secure cutter mounting 100 mm total length for extended reach 20 mm shaft diameter for stable clamping 17.7 mm cutter shank opening for compatibility Precision where length is required without sacrificing rigidity This extension delivers a measured increase in reach while minimising flex. The 100 mm total length is engineered to provide additional clearance in fixtures and deep cavities, yet the 20 mm shaft preserves lateral stiffness to reduce vibrations. The threaded interface with an M10 thread and a 30 mm cone seating ensures a firm mechanical connection; this reduces radial runout and supports repeatable positioning during serial machining. By selecting an extension with defined tolerances, shops can maintain part accuracy without resorting to ad‑hoc improvisation. Straightforward integration with thread-mounted cutters Designed for compatibility with screw-in style cutters, the extension features a 17.7 mm cutter shank opening and a 30 mm cone length for reliable seating of the cutter body. The geometry supports standard thread-mounted tooling systems commonly found in milling spindles and toolholders. Installation is a simple mechanical step: the extension is secured by the M10 thread into the cutter or holder and checked for concentricity before operation. This predictable assembly reduces setup time and helps teams keep production running smoothly. Built for dependable workshop use and supply continuity Constructed for routine industrial use, the extension offers a robust, low-mass solution at 0.235 kg that minimises added inertia while providing the necessary reach. The compact weight helps preserve spindle dynamics compared with longer, heavier adapters. Supplied by Teknik Makina and available through Metav Werkzeuge, the component is part of a broader catalogue that supports centralised sourcing, helping workshops reduce supplier complexity and secure dependable replenishment for precision tooling. For compatibility checks and fast supply of the Teknik Makina VT509TM extension, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: VT509TM Manufacturer: Teknik Makina Thread: M10 Total length: 100 mm Shaft diameter: 20 mm Cutter shank opening: 17.7 mm Cone length for screw-in cutter: 30 mm Weight: 0.235 kg eCl@ss: 21189208 ETIM: EC002219 Data Total length: 100 mm Shaft diameter: 20 mm Cutter shank opening: 17.7 mm Cone length: 30 mm Weight: 0.235 kg Thread: M10 Special features Application: screw-in milling cutters Compatible with thread-mounted cutters Files: 2 product documents attached Brand: Teknik Makina FAQ What is the main purpose of this extension? The extension VT509TM by Teknik Makina increases reach for thread-mounted milling cutters, providing an additional 100 mm overall length while maintaining secure mounting via the M10 thread. Which cutter shank sizes fit the extension? The extension accepts cutter shanks up to the specified opening of 17.7 mm, allowing direct seating of compatible screw-in milling cutters. How is the extension mounted and secured? Mounting is via the M10 threaded interface; the 30 mm cone length provides seating for the cutter and ensures a firm mechanical connection once tightened. Will using the extension affect spindle balance? The extension weighs 0.235 kg, which is modest; however, balancing should be checked after installation if high-speed machining or precision balancing is required with the extended assembly. What are the key dimensions to verify before use? Verify the 100 mm total length, shaft diameter 20 mm, cutter opening 17.7 mm and the M10 thread to ensure compatibility with the intended cutter and toolholder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of an increased working reach combined with secure clamping and a compact, lightweight design for smoother toolpaths and reliable machining cycles. The extension’s 20 mm shank, M10 thread and 100 mm overall length deliver practical reach without compromising stability — order the extension directly via Metav Werkzeuge or ask the consultants for application advice. Extension for Screw-in Milling Cutters VT508TM — 100 mm overall length, 20 mm shank | Teknik Makina The Extension for Screw-in Milling Cutters VT508TM is a precision adapter designed to extend screw-in milling cutters for CNC and manual milling operations, offering increased reach and stable seating for demanding toolpaths. Stable 20 mm shank for secure clamping M10 thread for screw-in cutter compatibility 100 mm overall length for extended reach Lightweight 0.238 kg for reduced spindle load Extend reach without compromising machining stability Extending the working length of a screw-in cutter allows access to deeper pockets or recessed features without resorting to long, flexible toolholders. The VT508TM acts as a precision adapter that preserves the cutter’s seating geometry while adding reach. Longer reach is achieved without significant loss of stiffness thanks to the carefully dimensioned shank and taper interface, which maintain concentricity and help avoid chatter. This results in more consistent surface finish and fewer interrupted machining cycles, supporting higher throughput in both prototype and production environments. Secure clamping and predictable dynamic behaviour A reliable connection between cutter and holder is essential for repeatable results. The adapter’s 20 mm shank and M10 thread provide a firm mechanical interface and a defined engagement length, while the conical seating section of 30 mm ensures axial alignment. The combination of secure thread engagement and a tapered fit reduces the risk of micro-movement under load, improving runout behaviour and tool life. The extension’s lightweight construction (0.238 kg) keeps additional centrifugal load low, helping to preserve spindle bearings and maintain dynamic balance at typical machining speeds. Easy integration into workshop tooling and process flow The extension is intended for straightforward use with standard screw-in milling cutters and common toolholding setups, so integration into existing tool libraries is simple. By avoiding special bespoke holders, shops can reduce inventory complexity and react faster to changing job requirements. The adapter supports efficient preparation on the toolbench and contributes to a leaner workflow: fewer tool changes and less repositioning mean shorter cycle times. Combined with Metav’s emphasis on reliability and supply from the Emmerich quality hub, this extension supports consistent production results across diverse applications. For a tailored recommendation on using the VT508TM extension from Teknik Makina, contact Metav Werkzeuge in Emmerich for application guidance — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VT508TM Manufacturer: Teknik Makina SKU: VT508TM Numbers / Core technical data Shaft diameter: 20 mm Shank opening for screw-in cutter: 17.7 mm Cone length for screw-in cutter: 30 mm Overall length: 100 mm Weight: 0.238 kg Thread: M10 eCl@ss: 21189208 ETIM: EC002219 Special features Suitable for screw-in milling cutters Precision adapter for extended reach Compact and lightweight design Designed for stable seating and reduced runout FAQ What is the shank diameter of the extension? The extension has a 20 mm shank; the VT508TM is specified with this diameter to ensure stable clamping in compatible toolholders. Which thread does the adapter use for the cutter connection? The adapter features an M10 thread, making it compatible with screw-in milling cutters that employ the same thread form. How long is the extension in total? The overall length is 100 mm, providing extra reach where standard holders are too short. Is the extension heavy and will it affect spindle balance? At 0.238 kg the VT508TM is lightweight; this helps to keep additional centrifugal loading minimal and supports predictable dynamic behaviour. Which cutter type is this designed for? This adapter is intended for screw-in milling cutters and enables secure mounting and extended reach when those cutters are employed. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, M8‑threaded connection and a 100 mm overall length to extend tool reach without sacrificing rigidity; the 16 mm shank and 14 mm cutter opening ensure a secure fit for standard screw‑in milling cutters. Order the (Extension for screw‑in cutter) directly via (Metav Werkzeuge) or ask our consultants if needed. Extension for Screw‑In Cutter VT502TM — 100 mm overall length, M8 thread (Teknik Makina) The Extension for screw‑in cutter VT502TM is a purpose‑built holder extension that increases machining reach for screw‑in milling cutters while maintaining run‑out stability in workshop and light industrial applications Secure M8 threaded connection for reliable mounting 16 mm shank for rigid machine tool clamping Compatible with 14 mm cutter openings 100 mm overall length for extended reach Increased reach with retained rigidity for precision machining This extension is engineered to extend the working envelope of screw‑in milling cutters without compromising stability. The 100 mm overall length provides extra reach for recessed features and hard‑to‑access geometries, while the 16 mm shank maintains a robust clamping interface to reduce vibration and run‑out. The M8 threaded joint is standardised, giving a tight mechanical coupling that supports consistent tool positioning; this reduces setup iterations and contributes directly to higher first‑pass accuracy in series and single‑piece production. Quick fitting and secure interface explained Fitting is straightforward: the extension accepts cutters with a 14 mm cutter opening and seats against the tool via a 30 mm cone engagement, ensuring axial alignment. The 30 mm cone length acts as a guiding seat that centres the insert‑style cutter, while the M8 thread secures axial load transfer during milling. For machinists unfamiliar with threaded cutter systems, the combination of a locating cone and fine mechanical thread means fewer adjustments are required at the machine, shortening preparation time and improving throughput on repetitive tasks. Practical benefits for workshop and jobbing environments Designed for everyday use in workshops and small production facilities, the extension combines lightweight handling (approx. 0.153 kg) with mechanical reliability. The compact mass reduces additional inertia on the spindle in hand‑operated setups and portable machines, which is beneficial where delicate control of cutting forces is required. By choosing a purpose‑made extension rather than ad‑hoc adaptors, shops gain predictable performance and reduced risk of tool failure, supporting a continuous production flow and consistent surface finish quality. For precise advice on integrating this Teknik Makina extension into existing toolholders, or to request order details from Metav Werkzeuge, please contact our team who can confirm suitability and availability. Technical data Article number: VT502TM Manufacturer: Teknik Makina Measurements Overall length: 100 mm Shank diameter: 16 mm Shank opening for cutter: 14 mm Cone length for screw‑in cutter: 30 mm Thread: M8 Weight: 0.153 kg Special features Suitable for screw‑in milling cutters Threaded M8 connection for secure mounting Locating cone for axial alignment Lightweight design for reduced spindle inertia FAQ What cutter types fit this extension? The extension accepts screw‑in milling cutters designed for a 14 mm opening; the locating cone and M8 thread provide a secure seat for standard screw‑in cutter systems such as those used in light milling operations. Is the extension compatible with my collet or holder? Compatibility depends on the machine’s toolholder accepting a 16 mm shank; the extension’s 16 mm diameter is intended for holders and collets rated for that shank size and will give a rigid connection when correctly clamped. How does the 30 mm cone length benefit accuracy? The 30 mm cone engagement centres the cutter axially before the thread is tightened, improving concentricity and reducing run‑out compared with non‑locating adaptors; this supports repeatable machining results. Can the extension be used for long overhang operations? The 100 mm overall length increases reach but also raises bending moment; the extension is optimised for moderate overhangs where the 16 mm shank still provides sufficient stiffness for accurate cuts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Achieve stable, high‑capacity face milling with a 100 mm diameter cutter head, eight cutting edges and a 45° cutting angle for efficient chip control; order the tool directly via Metav Werkzeuge or consult our application specialists for tailored advice. Face milling head T626TM – 100 mm diameter, for SNKX 1206 & ONHX 0505 indexable inserts (Teknik Makina) Face milling head T626TM is a compact, robust cutter head engineered for medium‑duty face milling operations using SNKX 1206 and ONHX 0505 indexable inserts. 100 mm diameter for broad cutting paths Compatible with SNKX 1206 inserts Eight cutting edges for extended tool life 45° cutting angle for efficient chip control Boosted material removal with efficient geometry The T626TM cutter head delivers increased productivity through its 100 mm diameter and 45° cutting geometry. The inclined cutting angle reduces radial forces and promotes a favourable chip thinning effect, which in practice means smoother surface finishes and more consistent material removal rates. For machining setups that rely on stable, repeatable passes, this geometry translates into fewer tool passes and a shorter cycle time per workpiece. Secure mounting and quick insert changes Designed with a 32 mm mounting bore and a compact overall length of 50 mm, the head offers mechanical rigidity that helps to dampen vibration. Insert clamping is handled with an M4x10 Torx screw tightened by a T15 key, allowing fast and secure insert replacement. Indexable inserts are reversible or replaceable cutting pieces mounted in the head, so worn edges can be rotated or swapped without replacing the whole tool, reducing downtime and lowering running costs. Broad compatibility for inventory flexibility The head accepts the SNKX 1206 insert format and is also compatible with ONHX 0505 Palbit alternatives, providing flexibility across supply chains. Using standardised insert systems simplifies stock management and enables rapid adaptation to differing cutting tasks. The provision of eight cutting edges across the assembly increases cumulative edge life before a full service or resharpening is required, supporting longer intervals between maintenance actions. Practical application and workshop advantages This cutter head is suited to workshops and production lines that employ indexable insert systems and require a balance between cutting area and machine load. The combination of a moderate overall mass (1.813 kg) and compact design helps maintain toolholder stability while remaining manageable for routine handling and setup changes. For operations prioritising reproducible results and straightforward maintenance, the head provides a reliable option that integrates with common insert suppliers. Contact Metav Werkzeuge for application guidance and to secure the Teknik Cutting Tools face milling head T626TM — Metav’s specialists in Emmerich will advise on insert choice, clamping and delivery options. Technical data Article number: T626TM Designation: Face milling head for SNKX 1206 and ONHX 0505 indexable inserts Manufacturer: Teknik Makina Facts Diameter: 100 mm Cutting edges: 8 Overall length: 50 mm Mounting bore: 32 mm Weight: 1.813 kg Cutting angle: 45° Special features Compatible inserts: SNKX 1206 Alternative inserts: ONHX 0505 Palbit Torx screw: M4x10 Torx key size: T15 FAQ What insert types fit this cutter head? The face milling head accepts SNKX 1206 indexable inserts and can also be fitted with ONHX 0505 Palbit alternatives for greater sourcing flexibility. How is an insert secured in the head? Inserts are clamped with an M4x10 Torx screw using a T15 key; the fastening method on the T626TM ensures repeatable seating and reliable cutting performance. Which machines are suitable for this cutter head? The cutter head is intended for machines that support a 32 mm mounting bore and the SNKX/ONHX insert systems; it is optimised for medium‑duty face milling where a 100 mm diameter tool is appropriate. How does the 45° cutting angle affect machining? A 45° cutting angle reduces radial cutting forces and improves chip evacuation, which typically results in smoother surfaces and steadier cutting behaviour on successive passes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of high stock removal capacity, secure Torx clamping and precise fit for HNGX 0906 indexable inserts to keep machining cycles efficient and predictable. Order directly via Metav Werkzeuge or contact our consultants for technical advice. Planmesserkopf — face milling head for HNGX 0906 indexable inserts, Ø100 mm, 8 cutting edges (Teknik Makina) The Planmesserkopf is a robust face milling head designed for medium- to heavy-duty machining with HNGX 0906 indexable inserts; suitable for production shops seeking reliable chip evacuation and repeatable mounting. Ø100 mm cutter head for efficient metal removal Secure Torx clamping with M4.5x11 screws Compatible with Pramet HNGX 0906 inserts 32 mm shank for rigid machine attachment Faster cycle times through optimised cutting geometry The cutter body combines an effective 55° cutting angle with eight evenly distributed cutting edges, enabling high metal removal rates while maintaining surface integrity. The geometry reduces cutting forces during engagement, which translates into shorter cycle times and steadier tool life. Using familiar indexable inserts such as HNGX 0906 ensures quick insert changes and predictable performance in series production. The result is a measurable increase in machining throughput without complex process changes. Easy, secure assembly and low downtime Mounting and maintenance are simplified by the use of M4.5x11 Torx screws and a T15 key interface, providing consistent torque and repeatable clamping. The 32 mm shank offers a rigid interface with common toolholders, reducing vibration and runout. When a cutting edge reaches wear limits, swaps are fast and straightforward thanks to standardised insert compatibility, which helps to keep machines running and reduces non-productive time. Reliable fitment and material compatibility for workshop workflows The tool is matched to Pramet insert dimensions and pocket form, ensuring correct seating and cutting orientation. With an outer diameter of Ø100 mm and an overall length of 50 mm, the head is compact enough for tighter set-ups yet large enough to provide aggressive engagement when required. The specified weight of 1.542 kg contributes to stable inertia on heavier spindles, supporting consistent cutting conditions across batches. Practical benefits for purchasing and process planning Selecting this face milling solution supports predictable inventory management due to its use of standard HNGX 0906 inserts and common Torx fastenings. The configuration is designed to integrate into existing tooling systems with minimal adaptation, lowering the barrier for shops looking to increase capacity. For procurement and technical validation, documentation and fitting details (including the T420TM SKU) are available to streamline selection and reduce specification uncertainty. For tailored advice on machine compatibility or to arrange prompt supply from Metav Werkzeuge in Emmerich, contact our team by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav’s specialists will advise on integration and ordering for the Teknik Cutting Tools face milling head (T420TM) Technical data SKU: T420TM Manufacturer: Teknik Makina Compatible inserts: HNGX 0906 Fastening screw: M4.5x11 (Torx T15) Core technical data Diameter: 100 mm Overall length: 50 mm Number of cutting edges: 8 Shank diameter (mount): 32 mm Weight: 1.542 kg Cutting angle: 55° Materials & features Compatible with Pramet indexable inserts Designed for HNGX 0906 inserts Torx screw size M4.5x11 Torx key T15 required Intended for face milling applications FAQ What inserts fit this milling head? The head is designed for HNGX 0906 indexable inserts; compatibility with Pramet dimensions ensures correct seating and expected cutting geometry for those inserts. Which screw and key are required for mounting the inserts? Mounting uses M4.5x11 Torx screws with a T15 key, providing secure and repeatable clamping for the insert pockets. Is this tool suitable for heavy stock removal? Yes — the combination of Ø100 mm diameter, 8 cutting edges and a 55° cutting angle supports medium to heavy stock removal while maintaining process stability. Which shank size is required on the toolholder? The tool uses a 32 mm shank, so a matching toolholder or arbor with a 32 mm reception is required for rigid mounting. Can the head be used in finishing operations? While optimised for robust face milling, the cutter can be used for semi-finishing when appropriate cutting parameters and the correct HNGX 0906 insert grade are selected. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, reliable milling solution that combines a 100 mm diameter contact area, nine cutting edges and a secure 32 mm arbor for steady production runs; order via Metav Werkzeuge or request specialist application guidance from our consultants. Planing cutter head T474TM for HNHX 1006 indexable inserts — 100 mm diameter, 9 cutting edges (Teknik Makina) A robust Planing cutter head T474TM engineered for face milling with HNHX 1006 indexable inserts, offering controlled chip evacuation and repeatable seating for industrial machining tasks. 100 mm diameter for broad material contact Nine cutting edges for extended tool life 55° cutting angle for efficient chip removal 32 mm arbor interface, robust attachment Consistent cutting performance that supports throughput The 100 mm diameter contact area and the arrangement of nine cutting edges provide a balance between metal removal rate and insert life, enabling longer uninterrupted runs. A 55° cutting angle improves chip formation and reduces cutting forces, which helps preserve spindle life and maintain surface quality. Compatibility with HNHX 1006 indexable inserts — widely available from Taegutec — simplifies retooling and standardises inventory across workshops, delivering measurable efficiency gains on repeated face-milling operations. Quick, secure insert changes for reduced downtime Fast attachment and secure clamping are achieved with the supplied Torx fixation: M5x12 screws tightened with a T20 key ensure repeatable positioning of the cutting inserts and minimise setup time. The use of standardised fasteners reduces the risk of incorrect tools and supports predictable maintenance intervals. Together, these factors translate into shorter non-productive times and more parts produced per shift. Robust mounting and compact design for stable machining A 32 mm arbor interface and a compact overall length of 62 mm make the head suitable for tight setups while maintaining rigidity; the unit’s mass of 2.023 kg contributes to stability under load without overburdening the toolholder. The combination of a solid attachment diameter and carefully distributed mass improves vibration damping, which benefits surface finish and extends insert life in routine production environments. Practical compatibility and workshop benefits Designed for straightforward integration, the head accepts HNHX 1006 inserts and matches common Taegutec geometries, simplifying replacement logistics. The clear specification of fasteners and interface dimensions supports accurate tool planning and allows engineers to forecast inventory needs with confidence. For further technical clarification or application-specific recommendations, Metav Werkzeuge’s technical team can provide data sheets and machining advice to align the tool with process requirements. Contact Metav Werkzeuge for tailored application support and reliable supply from Emmerich to the workshop bench Technical data Article number: T474TM Designation: Planing cutter head for HNHX 1006 indexable inserts Manufacturer: Teknik Makina eClass: 21180902 SKU: T474TM Facts Diameter: 100 mm Number of cutting edges: 9 Cutting angle: 55° Arbor interface: 32 mm Overall length: 62 mm Weight: 2.023 kg Special features Compatible with Taegutec HNHX 1006 inserts Torx screw: M5x12 Torx key size: T20 Files available: migration references present FAQ Which inserts fit this cutter head? The head accepts HNHX 1006 indexable inserts; compatibility with Taegutec variants is indicated for the Planing cutter head T474TM (Teknik Makina, SKU T474TM). What arbor size is required for mounting? A 32 mm arbor interface is specified for secure mounting of the cutter head. Which screw and key are used to secure the inserts? Inserts are secured with M5x12 Torx screws using a T20 Torx key. What are the key dimensions to check before ordering? Check the 100 mm diameter, 32 mm arbor interface and the overall length of 62 mm to ensure proper fitment. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from robust build and precise cutting geometry: the combination of a 100 mm diameter, 8 indexed cutting edges and a 43° cutting angle delivers efficient material removal and a consistent surface finish while the BK300 clamping and M8x18 locking screw ensure secure mounting; order or request advice via Metav Werkzeuge for fast supply and technical consultancy. Planing cutter head — for OFCR 0704 Indexable Inserts, 100 mm, 8 edges (Teknik Makina) A Planing cutter head engineered for high-efficiency face planning and surface finishing in turning and milling setups, compatible with OFCR 0704 indexable inserts 100 mm cutting diameter 8 indexed cutting edges 43° cutting angle for efficient material removal BK300 clamping interface, 32 mm bore Reliable surface quality from optimised cutter geometry The robust geometry of this cutter head focuses on delivering repeatable results in planing operations. With a 43° cutting angle and 8 indexed cutting edges, the design reduces cutting forces and improves chip evacuation, which leads to steadier feeds and a more uniform finish. The 100 mm diameter provides a wide cutting envelope for faster coverage of large surfaces, while compatibility with OFCR 0704 inserts keeps insert handling straightforward for both production workshops and maintenance teams. This combination targets higher throughput and lower scrap rates by converting geometric advantages into measurable productivity gains. Stable mounting and low-vibration operation for precise cuts Mounting stability is crucial to translate tool geometry into real-world accuracy. The cutter head features a BK300 clamping interface and a 32 mm bore for solid seating on standard toolholders, while the M8x18 locking screw secures the assembly against axial slip. Adjustment and tightening are performed with a 4 mm Allen key, ensuring consistent torque and reducing setup variability. The result is reduced vibration, longer insert life and fewer reworks — tangible benefits for workshops that must maintain tight tolerances under continuous use. Service-friendly design that reduces downtime Maintenance is simplified by the use of indexable inserts and a compact, pragmatic assembly. The head’s 8 cutting edges allow multiple index positions before replacement, and the compact overall length of 50 mm and mass of 1.654 kg make handling and tool changes quick and safe at the bench or on the machine turret. The modular nature of the insert system supports fast turnarounds during shift changes, while the clear mechanical interface minimises the need for specialised tooling. For operations seeking to balance machine uptime with ease of service, this cutter head offers a practical route to sustained performance. For reliable face‑planning performance from Teknik Makina, contact Metav Werkzeuge in Emmerich for tailored advice and rapid supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: T266TM Manufacturer: Teknik Makina ECLASS: 21180902 Product name: Planing cutter head (for OFCR 0704 Indexable Inserts) Core specifications Diameter: 100 mm Cutting edges: 8 Cutting angle: 43° Bore / shaft diameter: 32 mm Overall length: 50 mm Weight: 1.654 kg Features & compatibility For OFCR 0704 indexable inserts BK300 clamping interface M8x18 locking screw Operated with 4 mm Allen key FAQ Which indexable inserts fit this cutter head? The cutter head accepts OFCR 0704 indexable inserts; this specification ensures correct seating and cutting geometry for the tool. What clamping interface is required for mounting? Mounting requires a BK300 clamping interface with a 32 mm bore and the M8x18 locking screw to secure the head. How many usable cutting positions are available before insert replacement? With 8 indexed cutting edges, the head allows multiple index positions per insert, extending service intervals and reducing downtime. Is special tooling needed for adjustment and tightening? Adjustment is performed using a 4 mm Allen key for the locking screw; no additional specialised tools are required for routine maintenance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust combination of compatibility with ONMU 0505 indexable inserts, a compact Ø100 mm cutter diameter and secure M5x12 Torx clamping for consistent face-milling performance. Order the cutter head directly via Metav Werkzeuge or consult our specialists for application advice. Face-milling head T798TM — Face-milling head for ONMU 0505 indexable inserts, Ø100 mm, 45° cutting angle (Teknik Cutting Tools) A face-milling head engineered for efficient finishing and stable material removal in medium- to heavy-duty milling operations, compatible with ONMU 0505 indexable inserts Face-milling head for ONMU 0505 indexable inserts Ø 100 mm cutter diameter, 45° cutting angle Holds 8 cutting edges, sturdy M5x12 Torx clamping 32 mm shank diameter, weight 1.842 kg Faster setup through proven insert compatibility The T798TM face-milling head is designed around the widely used ONMU 0505 indexable inserts, enabling predictable cutting behaviour and quick insert replacement. Compatibility with ISCAR inserts reduces the need for special tooling inventories and shortens setup time in mixed-vendor environments. The secure M5x12 Torx clamping, operated with a T20 key, provides repeatable clamping torque and straightforward maintenance — the result is reduced downtime and a dependable production rhythm. Improved surface finish with optimised cutting geometry A 45° cutting angle combined with a Ø100 mm cutter body produces a favourable chip flow and reduced cutting forces, which helps to lower vibration and improve surface quality on the workpiece. The head accommodates 8 cutting edges, distributing load and enabling consistent material removal across the cutting path. For shops seeking a balance between material removal rate and finish quality, this geometry supports smoother feeds and extended insert life, translating into fewer tool changes and steadier cycle times. Robust interface for stable machining and easy integration With a 32 mm shank diameter and a compact overall length of 52 mm, the cutter head offers a rigid interface that minimises runout when mounted in the spindle or arbor. The unit weight of 1.842 kg contributes to stable rotary inertia during face milling, particularly on larger-diameter passes. Precision clamping combined with the standardised insert pocket means the head integrates cleanly into existing toolsets and can be applied across a range of common milling tasks without extensive requalification. Practical benefits for workshop efficiency Choosing this cutter head supports streamlined tooling management and predictable process outcomes. The use of standard indexable inserts simplifies stocking and replacement, while the mechanical design focuses on durability and repeatable performance. For production environments where consistency and uptime matter, the cutter body delivers tangible improvements in handling and reliability. Contact Metav Werkzeuge for supply and tailored application guidance on the Teknik Cutting Tools face-milling head T798TM — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: T798TM Designation: Face-milling head for ONMU 0505 indexable inserts Manufacturer: Teknik Makina Compatible inserts: ONMU 0505 (ISCAR) Facts Diameter: 100 mm Shank diameter: 32 mm Weight: 1.842 kg Cutting angle: 45° Number of cutting edges: 8 Overall length: 52 mm Special features Torx clamping screw M5x12 Torx key T20 Designed for face-milling applications Compatible with ISCAR ONMU 0505 indexable inserts FAQ Which indexable inserts fit the cutter head? The face-milling head accepts ONMU 0505 indexable inserts; it is compatible with inserts from ISCAR, providing a standardised fitting and predictable performance. How is the insert secured in the head? Inserts are clamped with an M5x12 Torx screw tightened with a T20 key, which ensures repeatable clamping and simple maintenance of the cutter head. What diameter and cutting angle does the head offer? The cutter body has a 100 mm diameter and a 45° cutting angle, a combination that balances material removal with surface finish quality. Is the head suitable for heavy-duty milling? The rigid 32 mm shank and the unit weight of 1.842 kg provide a stable mounting and sufficient inertia for many medium- to heavy-duty face-milling tasks, depending on machine and process parameters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust face milling solution that combines compatibility with SDHT 1204 indexable inserts, a compact 32 mm arbor, and a wide effective cutting range to keep changeovers short and productivity high — order directly via Metav Werkzeuge or consult their specialists for technical support. Face milling head T304TM — compact face milling head for SDHT 1204 indexable inserts, Ø100 mm body Face milling head T304TM delivers precise, repeatable facing operations in production and workshop environments, engineered for SDHT 1204 indexable inserts and short setup times Face milling head for SDHT 1204 inserts 100 mm body diameter, compact design Max cutting diameter Ø114 mm 7 cutting edges for extended running time High metal removal with controlled cutting geometry The milling head is configured to use SDHT 1204 indexable inserts and a 45° cutting angle, a combination that converts spindle power into efficient material removal while reducing axial load. The design supports a Ø114 mm maximum cutting diameter on a compact 100 mm body, which permits stable machining on both large and medium-sized faces. For operations that demand consistent surface quality, the angled approach reduces vibration and distributes wear across 7 cutting edges, meaning fewer unplanned stoppages and lower tooling consumption per component. Fast, secure clamping and serviceable components for steady throughput Maintenance and insert replacement are facilitated by a M4.5x11 Torx clamp screw and a T15 Torx key fit, enabling secure seating of inserts and repeatable clamping torque with workshop-standard tools. The head mounts on a 32 mm arbor, offering a rigid connection that supports higher feeds and stable cuts; the overall compactness, at 62 mm length and 2.04 kg mass, helps to keep the centre of gravity close to the spindle and limits deflection during face milling. These attributes translate into shorter setup times and predictable cycle outputs — a practical advantage for batch production and smaller job shops alike. Durable compatibility and straightforward integration into existing tool systems Designed specifically for indexable tooling, the head accepts SDHT 1204 insert geometry and can be integrated with standard toolholders that accept a 32 mm bore. The modular approach permits shops to standardise inserts across different operations, lowering inventory complexity. The construction focuses on robustness and repeatability: a compact diameter for high rigidity, a service-friendly clamp screw, and a profile that balances chip evacuation with surface finish. For teams planning frequent regrinds or tight-tolerance facing, this combination reduces process variation and supports consistent part quality. For machining enquiries about the Teknik Cutting Tools face milling head T304TM or to secure supply directly from Metav Werkzeuge, contact Metav Werkzeuge GmbH in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and prompt delivery Technical data Article number: T304TM Manufacturer: Teknik Cutting Tools (Teknik Makina) Brand: Teknik Cutting Tools Suitable for: SDHT 1204 indexable inserts SKU: T304TM Facts Max cutting diameter: 114 mm Body diameter: 100 mm Arbor/holder diameter: 32 mm Number of cutting edges: 7 Cutting angle: 45° Overall length: 62 mm Weight: 2.04 kg Special features Torx screw M4.5x11 Torx key T15 Compact, rigid design for face milling Compatible with SDHT 1204 inserts Robust construction for workshop use FAQ What inserts are compatible with this milling head? The face milling head T304TM is specified for SDHT 1204 indexable inserts; the geometry is matched to that insert size for predictable cutting behaviour. Which arbor size is required to mount the head? Mounting requires a 32 mm arbor bore as used in standard toolholders for this head. How many cutting edges are available before a full re‑set is needed? The head accommodates 7 cutting edges, which allows wear to be distributed over multiple positions and extends operation between re‑indexing events. What torque system secures the inserts? Inserts are clamped using a M4.5x11 Torx screw, tightened with a T15 Torx key for secure, repeatable seating. Is the head suitable for heavy stock removal on large faces? With a 45° cutting angle and a Ø114 mm effective cutting diameter the head is designed for efficient face milling on medium to large surfaces while maintaining stability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Taking advantage of a 100 mm diameter head with seven cutting edges and a secure 32 mm arbor, this cutter head delivers stable material removal and repeatable surface quality for indexed-insert applications; order the cutter directly from Metav Werkzeuge or request a technical consultation from the Metav team. Planmesserkopf T437TM — face milling head, 100 mm diameter, 7 cutting edges (Teknik Makina) The Planmesserkopf T437TM is a precision face milling head engineered for high-efficiency finishing and semi‑roughing with SEET 12T3 R245 indexable inserts, suitable for CNC and toolroom operations. *Face milling head for SEET 12T3 inserts *Diameter 100 mm for robust material removal *Seven cutting edges for balanced cutting action *32 mm bore for secure spindle fit *Compatible with Sandvik, XTC, ZCC inserts Greater throughput through balanced geometry and cutting angle The cutter head’s balanced layout with seven cutting edges and a 45° cutting angle reduces vibration and distributes cutting forces evenly across the tool body. This leads to more consistent tool life per insert and a better surface finish on each pass. The geometry suits both finishing and light semi‑roughing operations where maintaining part tolerances and improving cycle times matter. By choosing a head that couples axial rake and clearance optimally, machinists benefit from predictable chip control and a reduced need for frequent rework. Secure mounting and straightforward insert replacement A 32 mm arbor provides a rigid connection to the spindle, improving concentricity and minimising runout during heavy cuts. Insert retention uses an M3.5×8.5 Torx screw tightened with a T15 key, enabling quick and safe insert changes while preserving the seat integrity. This straightforward fixing method shortens setup and maintenance times, helping shops keep machines productive and reduce non‑cutting time. Broad compatibility for flexible tooling setups Designed for SEET R245 style indexable inserts, the head is compatible with leading insert manufacturers such as Sandvik, XTC and ZCC, permitting procurement flexibility and straightforward replacement sourcing. The ability to accept widely available inserts supports cost‑effective stocking strategies and simplifies retooling across different machines or jobs without changing clamping or toolholder configurations. Practical dimensions and handling for workshop integration With a nominal diameter of 100 mm and a total length of 55 mm, the cutter head occupies minimal overhang while delivering a substantial cutting width. The unit weight of 1.715 kg keeps handling manageable for toolroom staff and reduces inertia effects in spindle dynamics compared with larger heads. These dimensions make the head suitable for compact setups where spindle clearance and tool reach must be balanced against cutting performance. Contact Metav Werkzeuge for procurement and compatibility checks on the Teknik Makina Planmesserkopf T437TM; technical advice and order processing are available from Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data *SKU: T437TM Manufacturer: Teknik Cutting Tools Product: Face milling head for indexable inserts (SEET 12T3 R245) Brand: Teknik Makina Numbers / Core technical data *Diameter: 100 mm Bore / arbor: 32 mm Cutting edges: 7 Total length: 55 mm Cutting angle: 45° Weight: 1.715 kg Torx screw: M3.5×8.5 Torx key size: T15 Special features / Versions *Suitable for SEET R245 12T3 indexable inserts Compatible with Sandvik, XTC, ZCC inserts Indexable‑insert face milling head design Quick insert replacement with Torx fastening Compact overall length for reduced overhang FAQ What insert type does this cutter head accept? The cutter head accepts SEET R245 12T3 indexable inserts; compatibility with inserts from Sandvik, XTC and ZCC is specified for flexible sourcing. Is the arbor size suitable for standard toolholders? Yes, the cutter head has a 32 mm bore suitable for matching toolholders and spindles that accept a 32 mm arbor. How are the inserts secured to the cutter head? Inserts are fixed using an M3.5×8.5 Torx screw, tightened with a T15 key, providing reliable clamping and straightforward replacement. What cutting angle does the head use and why does it matter? The head features a 45° cutting angle, which helps balance radial and axial cutting forces for improved surface finish and reduced vibration. Can this head be used on compact CNC machines? With a total length of 55 mm and a moderate weight of 1.715 kg, the head is suitable for compact setups where overhang and spindle clearance are considerations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

High-precision facing and broad compatibility with SEET R245 indexable inserts ensure consistent surface finish and straightforward insert replacement; the robust 32 mm shank and Ø100 mm cutter diameter support stable machining across batch runs. Order the facing head directly via Metav Werkzeuge or consult our specialists for application advice. Facing head T566TM — facing head for SEET 12T3 R245 indexable inserts, Ø100 mm, 32 mm shank (Teknik Makina) A compact facing head T566TM engineered for precise facing and light milling operations with SEET R245 12T3 indexable inserts, suitable for production and workshop environments. Compatible with SEET R245 12T3 inserts Ø100 mm cutter diameter 32 mm shank diameter Seven cutting edges, 45° cutting angle Stable machining for consistent surface quality The facing head delivers precision and repeatability through a balanced design and a standardised toolholder diameter. The combination of a 32 mm shank and a Ø100 mm cutter diameter reduces vibration during facing, which directly benefits surface finish and tool life. For operations requiring regular insert changes, the indexable system simplifies maintenance and minimises downtime while maintaining consistent cut geometry. Efficient material removal with defined geometry Designed around the SEET R245 12T3 insert geometry, the toolhead exploits the 45° cutting angle for a controlled cutting action that spreads cutting forces and lowers cutting resistance. The seven cutting edges provide incremental engagement, enabling smoother transitions and efficient heat distribution. This results in reliable chip control and predictable performance whether used for roughing passes or semi-finishing. Practical assembly and workplace integration Mounting and service are straightforward: the tool uses a Torx screw M3.5x11 together with a hex screw M5x7 and is tightened with a Torx key T15, streamlining workshop routines. At 1.812 kg the head balances rigidity with manageable handling during set-up. Compatibility with recognised insert manufacturers such as Sandvik, XTC, and ZCC ensures supply flexibility and access to a range of grades for different workpiece materials. For specification checks, ordering options or tailored application advice on the Teknik Makina facing head, contact Metav Werkzeuge in Emmerich by e-mail or phone — our specialists are available to advise on suitability and delivery. Technical Data Article number: T566TM Manufacturer: Teknik Makina Designation: Facing head for SEET 12T3 R245 Indexable Inserts Facts Cutter diameter: 100 mm Shank diameter: 32 mm Weight: 1.812 kg Cutting angle: 45° Number of cutting edges: 7 Overall length: 50 mm Torx screw: M3.5x11 Hex screw: M5x7 Torx key: T15 Special features Fits SEET R245 12T3 inserts Compatible with Sandvik, XTC, ZCC inserts U plate: TA052 Indexable insert system for fast replacement Balanced design for reduced vibration FAQ Which inserts fit this facing head? The facing head accepts SEET R245 12T3 indexable inserts and is compatible with inserts from Sandvik, XTC and ZCC. What are the principal dimensions to check for machine compatibility? Key dimensions are a 32 mm shank diameter and a Ø100 mm cutter diameter; overall length is 50 mm. What mounting hardware is required? Mounting uses a Torx screw M3.5x11 and a hex screw M5x7; assembly and torque are applied with a Torx key T15. How many cutting edges does the head provide and what is the cutting angle? The head presents seven cutting edges and a 45° cutting angle, optimised for stable facing and smooth chip flow. What is the weight of the tool head? The facing head weighs 1.812 kg, offering a balance between rigidity and ease of handling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the 100 mm diameter, internal coolant and compatibility with RCKT 1204 inserts to maintain a steady production rhythm with reduced downtime. Order the round insert face mill directly via Metav Werkzeuge or consult our specialists for application advice. 100 mm round insert face mill — internal coolant, for RCKT 1204 (Teknik Makina) The 100 mm round insert face mill is a robust milling head designed for efficient face milling with RCKT 1204 indexable inserts, suited to general machining and finishing operations. 100 mm diameter for stable cutting Internal coolant for improved chip evacuation Compatible with RCKT 1204 indexable inserts Seven cutting edges with 45° cutting angle Productivity through optimised geometry and coolant The cutter combines a 45° cutting angle with seven precisely set teeth to balance chip thinning and surface finish. This geometry reduces cutting forces and spreads wear evenly across the inserts, supporting longer effective tool life and consistent part quality. Integrated internal coolant directs the lubricant precisely to the cutting zone, improving heat control and chip evacuation; the result is higher material removal rates and fewer interruptions for cleaning. Faster insert changes and secure clamping for workshop efficiency Designed for simple maintenance, the head accepts standard RCKT 1204 indexable inserts from Sandvik and uses a Torx clamping system to speed changeovers. With the specified T15 Torx interface and M3.5x8.5 screws, replacement is straightforward and repeatable, reducing machine downtime. The configuration supports predictable setup times and integrates easily into established tool-change routines on milling spindles. Rigidity, handling and application fit for everyday production With a 100 mm diameter and a total length of 52 mm, the tool offers a compact profile that favours rigidity and balance during face-milling passes. The solid construction and measured mass contribute to stable cutting behaviour and repeatable results across batches. The design is well suited to workshops seeking a reliable face-milling head that pairs conventional indexable inserts with efficient coolant delivery for controlled machining cycles. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Makina round insert face mill T466-1TM into production; email info@metav-werkzeuge.com or call +49 2822 7131930 for specification support and ordering proximity from Emmerich. Technical data Article number: T466-1TM Manufacturer: Teknik Makina Product type: Round insert face mill Description: Rundplattenfräser for RCKT 1204 Indexable Inserts Core specifications Diameter: 100 mm Total length: 52 mm Weight: 1.608 kg Number of cutting edges: 7 Cutting angle: 45° Special features Internal coolant Compatible with RCKT 1204 indexable inserts Compatible insert manufacturer: Sandvik Torx key: T15 Torx screw: M3.5x8.5 ECLASS: 21180902 SKU / UID: T466-1TM FAQ Is the cutter compatible with Sandvik RCKT 1204 inserts? Yes. The Teknik Makina round insert face mill accepts RCKT 1204 indexable inserts and is specified for use with Sandvik-compatible grades. Does the tool have through-coolant capability? Yes. The milling head features internal coolant that channels lubricant directly to the cutting zone for better temperature control and chip evacuation. What Torx key and screw size are required for insert changes? Insert clamping uses a T15 Torx key with M3.5x8.5 screws as specified for the head. Which machining tasks suit this type of cutter? The cutter is intended for face milling and light to medium finishing passes where stable diameters and good surface quality are required. What are the dimensional references for setup and tool balance? Key references: 100 mm diameter, 52 mm total length and a mass of 1.608 kg; use these values for spindle and holder compatibility checks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust milling solution that combines high stability, compatibility with common indexable inserts and straightforward clamping to keep machining cycles predictable and efficient; order directly via Metav Werkzeuge or consult the technical team for application-specific advice. Round Face Mill T287-1TM – indexable face mill with Ø 100 mm and 8 cutting edges by Teknik Cutting Tools A Round Face Mill T287-1TM designed for versatile milling tasks, accepting RDMT 12T3 indexable inserts and engineered for secure mounting in standard toolholders. Diameter 100 mm cutter Accepts RDMT 12T3 indexable inserts Eight cutting edges for balanced machining 32 mm mounting bore, 50 mm overall length Consistent material removal for reliable cycle times The circular cutter body delivers consistent chip removal through its 8 cutting edges, which balances radial forces and reduces vibration during face milling. This leads to improved surface finish and more predictable tool life when paired with RDMT 12T3 indexable inserts. The result is a reduction in rework and increased throughput in series production; operators and planners benefit from fewer interruptions and steadier process windows. The robust design is aimed at stability rather than experimental high-speed profiling, offering dependable performance in batch and continuous operations. Rapid, secure clamping that minimises downtime A compact mounting arrangement with a 32 mm mounting bore and a clearly specified M3.5 locking screw ensures straightforward installation and secure clamping. The required Torx fixings are a M3.5x8.5 Torx screw operated with a T15 Torx key, simplifying maintenance procedures and repeatable reassembly. This precise clamping interface reduces micro-movement at the toolholder junction, which supports repeatable accuracy across tool changes and shortens setup time between batches — a concrete operational advantage on busy production floors. Practical cutter dimensions for common machining cells With an outside diameter of 100 mm, an overall length of 50 mm and a unit mass of 1.435 kg, the cutter body balances rigidity and manoeuvrability for standard milling centres. The relatively compact profile keeps overhang modest and aids in maintaining cutter stiffness, which is beneficial when working at moderate depths of cut. Compatibility with widely used indexable inserts helps to lower tooling inventories: replacement inserts are economical compared with one-piece cutters, while the modular concept supports easy in-field restoration of cutting performance. Engineered for dependable workshop integration The tool’s interface and fixing specification follow common workshop standards, facilitating integration into existing tooling systems without the need for bespoke adapters. The use of indexable inserts reduces downtime for regrinds and allows grades to be selected according to the workpiece and cutting conditions. Clear specification of screw and key sizes supports safe maintenance practices and predictable spare-parts planning, contributing to a steadier production flow and simplified logistics for maintenance teams. For tailored advice on using the Teknik Cutting Tools Round Face Mill T287-1TM in specific machining applications, contact Metav Werkzeuge for a technical discussion or material-specific recommendations. Technical Data Article number: T287-1TM Manufacturer: Teknik Cutting Tools Type: Round face mill for RDMT 12T3 indexable inserts Facts Diameter: 100 mm Cutting edges: 8 Mounting bore: 32 mm Overall length: 50 mm Weight: 1.435 kg ECLASS: 21180902 ETIM: EC011860 Special features Accepts RDMT 12T3 indexable inserts Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key size: T15 FAQ What insert type does this cutter take? The round cutter is designed for RDMT 12T3 indexable inserts, enabling straightforward replacement and grade selection to match the workpiece. What are the key mounting dimensions to check before fitting? Verify a 32 mm mounting bore and an overall length clearance of 50 mm; these dimensions match the cutter to the toolholder and machine envelope. How many cutting edges are available and what is the benefit? The body provides 8 cutting edges, which promotes balanced cutting forces and contributes to smoother surfaces and reduced vibration. Which fasteners are required for secure clamping? Clamping uses an M3.5 locking screw and M3.5x8.5 Torx screws, operated with a T15 Torx key for secure and repeatable assembly. Is the cutter heavy to handle during tool changes? The unit weight is 1.435 kg, making it manageable for routine handling and replacement in standard production environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high-performance milling solution that combines a 100 mm cutting diameter with internal coolant and seven indexable cutting edges for steady material removal and reduced downtime; order directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. Face milling cutter (100 mm) for RDMT 1604 indexable inserts — internal coolant, 7 cutting edges by Teknik Makina Face milling cutter for RDMT 1604 indexable inserts engineered for efficient face milling operations with internal coolant and a short overall length for secure mounting in compact toolholders 100 mm diameter for stable cutting Internal coolant for improved chip evacuation 7 indexable cutting edges for higher productivity Compatible with RDMT 1604 indexable inserts Torx T15 screws M4x10 for secure clamping Designed for reliable, high-throughput face milling The face milling cutter is optimised for consistent, repeatable performance on machining centres where surface quality and cycle time matter. With a 100 mm diameter and seven cutting edges, the tool spreads cutting forces across multiple inserts to reduce vibration and extend tool life. Compatibility with RDMT 1604 indexable inserts means quick, economical index changes and predictable cutting geometry, enabling higher feed rates and fewer tool changes for improved shop-floor productivity. Internal coolant keeps chips clear and tools cooler Built with internal coolant channels, the cutter directs cutting fluid precisely to the cutting zones to improve chip evacuation and lower insert temperatures. This reduces thermal wear and helps maintain a stable cutting edge geometry during extended cuts. For materials and operations that generate built-up edge or require controlled cooling, the internal feed improves repeatability and can contribute to longer insert life and more consistent surface finish. Fast insert changes and secure clamping cut downtime Insert retention uses Torx T15 drive hardware with M4x10 screws, providing a robust and repeatable clamping torque for each indexable tip. The standardised screw interface simplifies maintenance and allows for quick, safe insert replacement without specialised tooling. As a result, set-up times are reduced and throughput is improved, which is particularly beneficial in batch production or scheduled tool-change regimes. Practical applications and purchaser benefits This tool is suited to face milling tasks where a compact overall length and dependable coolant supply are required. The combination of multiple cutting edges and rigid mounting delivers smoother surfaces and higher metal removal rates, supporting lean production aims. For purchasers, the milling head represents a pragmatic balance between performance and serviceability, and the Metav supply chain ensures reliable stock handling and straightforward replenishment for uninterrupted production. Contact Metav Werkzeuge for tailored machining advice and fast supply of the Teknik Makina face milling cutter (SKU T275-1TM); technical enquiries by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: T275-1TM Manufacturer: Teknik Makina Product type: Face milling cutter (Rundplattenfräser) Compatible inserts: RDMT 1604 SKU / Label: 100mm Rundplattenfräser RDMT 1604 L52mm mit Innenkühlung Facts Diameter: 100 mm Overall length: 52 mm Cutting edges: 7 Weight: 1.374 kg eClass: 21180902 Special features Internal coolant Torx T15 fastening Torx screws M4x10 Designed for indexable inserts RDMT 1604 FAQ What inserts does this cutter accept? The cutter is designed for RDMT 1604 indexable inserts and delivers stable geometry and easy indexing for those insert types. How does the internal coolant benefit machining? Internal coolant supplies fluid directly to the cutting zone; with the Teknik Makina face milling cutter this improves chip evacuation and reduces insert temperature for longer cutting intervals. How are the inserts secured? Inserts are retained using Torx T15 screws with M4x10 fasteners to provide consistent clamping and straightforward replacement. Is this tool suitable for high-feed face milling? The multiple cutting edges and rigid design make this cutter appropriate for higher feed rates within the limitations of the selected insert grade and machine rigidity. Where can I get more technical information or spare parts? Metav Werkzeuge maintains stock and can advise on insert grades and spare fasteners for the Teknik Makina cutter (SKU T275-1TM). Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust face‑milling solution that combines internal coolant, a 100 mm cutting diameter and seven cutting edges for steady material removal; order the T714‑1TM directly via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. T714-1TM indexable insert face mill by Teknik Makina — 100 mm, internal coolant A compact face milling head, the T714‑1TM is engineered for efficient face milling with RPMT 1204 indexable inserts and integrated coolant supply. 100 mm diameter for stable face milling Internal coolant for improved chip evacuation Seven cutting edges for high material removal Compatible with RPMT 1204 Korloy inserts Consistent productivity through design and coolant control The face milling head delivers a predictable machining cycle thanks to its 100 mm diameter and seven cutting edges, which together increase the effective cutting engagement and distribute cutting forces evenly. The integrated internal coolant reduces heat at the cutting zone and supports controlled chip formation, which helps to maintain tool life and surface quality. This configuration is aimed at optimising throughput in medium‑duty production runs where cycle time and component consistency are primary concerns. Fast setup and secure clamping for reliable operation Designed for straightforward assembly, the milling head uses M4x8.5 Torx screws and a T15 Torx key for secure insert fastening, minimising downtime during tool changes. The overall length 53 mm and a mass of 1.278 kg contribute to a compact, rigid tool package that resists vibration under typical face‑milling conditions. Compatibility with standard RPMT 1204 inserts from Korloy simplifies stocking and reduces the number of different insert types required in the workshop, supporting efficient tool management. Application focus and maintenance considerations This indexable face mill is best deployed where broad face contact and reliable chip evacuation are required. The head accepts RPMT 1204 indexable inserts and is therefore suited to workflows that favour replaceable cutting edges for cost‑effective resurfacing. Routine maintenance is limited to insert replacement and screw torque checks; the internal coolant port helps keep the cutting zone clear, reducing manual chip clearing and helping to protect the clamping surfaces. The result is lower unplanned downtime and a predictable service interval for machining operations. For tailored advice on integrating the T714‑1TM into an existing toolset and to secure prompt supply from Emmerich, contact Metav Werkzeuge by eMail at info@metav-werkzeuge.com or by telephone at +49 2822 7131930 Technical data SKU: T714-1TM Label: 100mm Rundplattenfräser RPMT 1204 L53mm mit Innenkühlung Manufacturer: Teknik Makina ECLASS: 21180902 Core data Diameter: 100 mm Overall length: 53 mm Weight: 1.278 kg Number of cutting edges: 7 Torx screw: M4x8,5 Torx key: T15 Special features Internal coolant: yes Compatible inserts: RPMT 1204 indexable inserts Compatible insert manufacturer: Korloy Category: Planmesserkopf FAQ Which indexable inserts fit this face mill? The T714‑1TM accepts RPMT 1204 indexable inserts; Korloy inserts in that specification are suitable and commonly used with this head. Is the milling head coolant‑fed internally? Yes, the face mill features internal coolant to support chip evacuation and reduce thermal load at the cutting zone. How many cutting edges are active on the tool? The cutter is equipped with seven cutting edges, optimised for steady material removal and balanced cutting forces. What size and type of screws are required for insert clamping? Insert clamping is performed with M4x8.5 Torx screws using a T15 Torx key, ensuring secure fastening and rapid replacement. What are the primary benefits of using this face mill in production? The head provides a broad cutting contact area (100 mm diameter), reliable coolant delivery and seven insert positions for extended on‑tool time and consistent surface finish with predictable maintenance intervals. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com