Gibt es einen Hahn und Kolb Online Shop?

Turning Holder PWLN for WNMG Indexable Inserts — Teknik Makina The Turning Holder is a compact, precision tool designed for right-hand turning with WNMG 0604 indexable inserts, ideal for professional workshop and lathe applications. Compatible with WNMG 0604 inserts Internal Cooling for improved Chip Evacuation Robust clamp system with TH617 screw 100 mm Overall Length for versatile reach Right-hand Cutting with 95° cutting angle Precision and Compatibility for Accurate Turning Built around compatibility with WNMG 0604 indexable inserts, this holder delivers consistent Precision in external turning operations. The 95° cutting angle and right-hand configuration ensure stable contact and predictable Chip Flow, reducing vibration and improving Surface Finish. For shops that demand repeatable results, the combination of insert fit and holder geometry supports reliable toolpaths and predictable machining outcomes. Robust Construction and Practical Features The holder combines a compact profile with practical mechanical parts to simplify workshop routines. With a 100 mm Length, a 16 mm Width and 16 mm Height, plus a 20 mm Cutting Head Width, the design balances rigidity and access. The clamping system uses the TH617 clamp screw and TL3 knee lever for secure fixation, while the Internal Cooling feature assists in temperature control and Chip Evacuation during longer cuts. Who Benefits and When to Use This Tool This Turning Holder is developed for machining professionals, CNC turning centres and manual lathe operators who use WNMG 0604 inserts and require a compact, reliable tooling solution. Operators will appreciate faster Insert Changes and consistent clamp performance, which help reduce setup time and maintain machining quality across batch runs. The holder’s format suits short to medium overhangs where rigidity and cooling support are priorities. Easy Setup and Low-Maintenance Operation Assembly and maintenance are straightforward: the holder matches the ISO designation PWLNR 1616, uses a 2.5 mm Allen key for adjustments, and includes straightforward locating features such as the TS3 dowel pin. Regular inspection of the clamp screw and knee lever keeps performance stable, and the open design allows quick visual checks of insert seating to avoid interruptions during production. For technical assistance or to confirm compatibility with your machine, contact METAV Werkzeuge for expert advice and support — they provide competent consultation for complex tooling decisions and can help specify the right configuration for your application. 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Technical Specifications Designation: Turning Holder Brand: Teknik Makina SKU: AP158TM Compatible Indexable Inserts: WNMG 0604 ISO Designation: PWLNR 1616 Secondary Designation: H06-IKG1/8 Overall Length: 100 mm Width: 16 mm Height: 16 mm Cutting Head Width: 20 mm Cutting Height: 30 mm Clamp Screw: TH617 Knee Lever: TL3 Dowel Pin: TS3 Hex Key: 2.5 mm Allen key Internal Cooling: Yes Cutting Direction: Right Cutting Angle: 95° Weight: 0.218 kg GTIN: 4061905150371 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder and which insert size is recommended? The Turning Holder from Teknik Makina is designed for WNMG 0604 indexable inserts; this size ensures correct seating and chip control when used with the holder’s 95° geometry. Does the Teknik Makina Turning Holder support coolant-through operation? Yes, the Turning Holder features Internal Cooling, which aids chip evacuation and temperature management when coolant supply is available. Which tools are needed for assembly and maintenance of the Turning Holder? Assembly and basic maintenance of the Teknik Makina Turning Holder require a 2.5 mm Allen key for clamp adjustments and inspection of the TH617 clamp screw and TL3 knee lever for secure fixation. Is the Turning Holder suitable for right-hand and left-hand turning? The Teknik Makina Turning Holder is configured for right-hand cutting with a 95° cutting angle and is intended for standard right-hand turning operations; left-hand versions would require a corresponding left-hand variant. 100mm PWLN Turning Holder for WNMG 0604, 95° Angle, Internal Coolant - Teknik Makina

Take advantage of a robust combination of process stability and straightforward maintenance: the T287TM is compatible with RDMT 12T3 indexable inserts and features a 100 mm diameter with seven cutting edges for balanced cutting. Order the cutter directly via Metav Werkzeuge or request technical advice from the consultants. Indexable face mill T287TM — 100 mm diameter, for RDMT 12T3 inserts (Teknik Makina) Indexable face mill T287TM designed for reliable face milling in workshop and production environments with RDMT 12T3 indexable inserts Compatible with RDMT 12T3 indexable inserts 100 mm diameter for effective face milling 7 cutting edges for balanced cutting 32 mm shank for high rigidity Increased machining stability through a rigid design The T287TM face mill is engineered for stable operation: the 32 mm shank and a well‑balanced mass (approx. 1.402 kg) reduce vibration and support repeatable results. A cutter with a 100 mm diameter and seven cutting edges distributes cutting forces across multiple engagement points, which lowers tool load per insert and helps to maintain a consistent machining rhythm. For production planners this translates into more predictable cycle times and fewer surface defects compared with single‑edge solutions. Faster tooling changes and predictable service routines Designed for indexable tooling concepts, the milling head accepts RDMT 12T3 inserts, enabling fast blades replacement and reduced process downtime. Insert retention uses M3.5 fixing hardware and the fixing screw is M3.5x8.5, loosened and tightened with a T15 Torx key for quick, repeatable clamping. The modular approach means worn geometry is resolved by inserting fresh cutting inserts rather than regrinding, which simplifies inventory management and lowers life‑cycle tooling cost. Consistent surface finishes and reduced rework The multiple‑edge arrangement improves chip division and promotes even wear across the insert set, supporting a consistent surface finish and minimised need for secondary operations. The cutter head’s geometry is set to achieve balanced engagement with each indexable insert, which reduces the risk of chatter in common face‑milling tasks. For operations where component quality and throughput matter, this approach delivers measurable process efficiency. Suitable for workshop and light industrial production With an overall length of 50 mm and compact dimensions, the milling head integrates easily into standard arbors and toolholders that accept a 32 mm shaft. The specification is suitable for general face‑milling applications where RDMT 12T3 inserts are already in use, making the T287TM a practical choice for jobbing shops and production lines alike. The robust construction supports frequent index changes and straightforward handling during setup. Contact Metav Werkzeuge for availability and tailored tooling recommendations for the T287TM indexable face mill; technical consultants at Metav Werkzeuge are available by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: T287TM Manufacturer: Teknik Makina Designation: Indexable face mill for RDMT 12T3 inserts Facts Diameter: 100 mm Cutting edges: 7 Overall length: 50 mm Shank diameter: 32 mm Weight: 1.402 kg ECLASS: 21180902 ETIM: EC011860 Special features Compatible with RDMT 12T3 indexable inserts Torx screw: M3.5 Torx screw (fixing): M3.5x8.5 Torx key: T15 SKU: T287TM FAQ Which inserts are compatible with this cutter? The T287TM is designed for use with RDMT 12T3 indexable inserts; compatibility is specified to enable fast insert changes and straightforward re‑stocking. What are the main dimensions of the milling head? The cutter has a 100 mm diameter, 50 mm overall length and a 32 mm shank diameter, listed to support correct toolholder selection. How many cutting edges does the tool use and what is the benefit? The head accepts 7 cutting edges in total; this distribution reduces individual insert load and contributes to a steadier cutting action and improved surface consistency. Which screws and key are required for insert changes? Insert retention uses M3.5 fixing screws, the fixing screw is M3.5x8.5, and a T15 Torx key is specified for reliable clamping. Is this cutter suitable for production environments? Yes — the T287TM is designed for workshop and light production use where indexable insert systems and consistent throughput are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust cutting capacity, precise clamping and simple serviceability to keep production moving with minimal downtime; order the tool directly via Metav Werkzeuge or consult our specialists for integration advice. Rundplattenfräser T664TM — face mill for RNHX 1204 indexable inserts, Ø100 mm, 8 cutters (Teknik Makina) The Rundplattenfräser T664TM is a purpose-built face mill intended for medium- to heavy-duty machining, offering a stable platform for high-volume material removal with RNHX 1204 indexable inserts. Ø100 mm cutting diameter 8 cutting edges for fast material removal 32 mm shank for rigid clamping Compatible with RNHX 1204 indexable inserts Higher throughput through optimised cutter geometry The combination of a Ø100 mm cutting diameter and 8 cutting edges means each revolution removes more material while distributing cutting forces across multiple inserts. This results in shorter cycle times and fewer interruptions for tool changes. The cutter body has been designed to support steady chip flow and consistent engagement, which improves process stability on both castings and machined cast-iron components. In practical terms, shops experience fewer tool-change cycles per shift and a more predictable production rhythm, which supports tight delivery schedules. Secure clamping and straightforward insert replacement A 32 mm shank allows for rigid, vibration-reducing clamping in standard toolholders, improving surface quality and extending insert life. Clamping and insert fixation rely on Torx M4x10 screws and a T15 key, providing a familiar and repeatable method for secure retention. Because the tool accepts RNHX 1204 indexable inserts, there is flexibility in selecting grades and geometries from established suppliers such as Palbit, enabling optimisation for steel, alloyed materials or mixed-batch production without altering the cutter body. Robust construction for consistent surface finish The solid construction and balanced layout of this cutter support steady cutting conditions, which translates into a more uniform surface finish and reduced rework. The mass and form of the body — at approximately 1.57 kg — help dampen high-frequency vibrations that can otherwise mar component finish. For operations where repeatability matters, such as series production or finishing passes prior to heat treatment, the stability of the cutter helps maintain tolerances and reduces the need for corrective grinding or polishing. Integration into workshop workflows and maintenance benefits Designed with practical serviceability in mind, the cutter keeps downtime low: insert changes are fast, and standard Torx fastening ensures that the tool can be serviced with common workshop equipment. The compatibility with standard RNHX 1204 inserts supports stocked consumables and easier supplier sourcing. For teams planning toolpaths, the predictable engagement profile simplifies feed and speed calculation and aids CAM programming, while the cutter’s straightforward interface with conventional toolholders speeds up bench-to-machine transitions. For tailored advice on integrating the Teknik Makina T664TM into a production cell or for specification matching, contact Metav Werkzeuge for a pragmatic recommendation and application support Technical Data Article number: T664TM Manufacturer: Teknik Makina Brand: Teknik Makina Facts Diameter: 100 mm Overall height: 50 mm Shank diameter (D): 32 mm Number of cutting edges: 8 Weight: 1.57 kg Special features Compatible with RNHX 1204 indexable inserts Torx screw: M4x10 Torx key: T15 Suitable insert supplier: Palbit FAQ Which inserts fit this face mill? The Rundplattenfräser T664TM accepts RNHX 1204 indexable inserts; compatible grades from Palbit and similar suppliers can be used depending on the workpiece material. What shank diameter is required for clamping? The cutter features a 32 mm shank diameter, requiring toolholders or adaptors rated for a 32 mm shank for secure clamping. How many cutting edges does the tool provide? The Teknik Makina T664TM has 8 cutting edges, which helps to increase material removal rates and distribute cutting loads. What fastening hardware is used for inserts? Inserts are secured with Torx M4x10 screws; a T15 key is the correct tool for tightening and replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of a Ø100 mm cutting diameter, 7 cutting edges and secure Torx fastening ensures efficient material removal with predictable tool life; order the milling cutter via Metav Werkzeuge or consult the technical team for application‑specific recommendations. Round Insert Milling Cutter T275TM — Ø100 mm, 7 cutting edges, for RDMT 1604 | Teknik Makina The Round Insert Milling Cutter T275TM is a compact indexable cutter designed for face milling applications using RDMT 1604 inserts, offering high stability for medium‑duty production tasks. Ø100 mm cutting diameter 7 cutting edges for smooth material removal Compatible with RDMT 1604 indexable inserts 32 mm tool shank; robust clamping Higher productivity through distributed cutting load With a Ø100 mm diameter and 7 cutting edges, the tool distributes cutting forces across multiple teeth, which reduces feed‑per‑tooth and can increase surface quality while maintaining cycle time. The multiple‑edge configuration supports consistent chip formation and reduces shock to the spindle; this is particularly beneficial when machining interrupted cuts or variable stock. The result is improved process reliability and fewer unexpected tool changes, which supports steady production flow. Fast insert changes and secure clamping for less downtime The cutter is specified for RDMT 1604 indexable inserts and uses a combination of fasteners for secure retention: a locking screw M4x10, Torx screws M4.5x11, and an upper plate BSP010. Insert replacement is performed with a T20 Torx key, enabling safe and repeatable seating of the insert pocket. This mechanical arrangement prevents micro‑movement under load and simplifies maintenance, so insert changes are quick and predictable without specialised equipment. Machine integration and predictable handling Designed with a 32 mm tool shank and an overall length of 52 mm, the cutter fits holders that accept a 32 mm connection and offers a compact envelope for tight setups. The assembled tool weight of 1.37 kg provides a sensible balance between rigidity and handling convenience. These dimensional facts make the tool straightforward to programme into CAM systems and easy to balance for moderate spindle speeds, helping to keep vibration low and surface finishes consistent. Discuss the T275TM from Teknik Makina with Metav Werkzeuge for tailored tooling advice and assured supply from Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: T275TM Manufacturer: Teknik Makina Product: Round insert milling cutter for RDMT 1604 indexable inserts ECLASS: 21180902 ETIM: EC011860 Core dimensions & weights Diameter: 100 mm Number of cutting edges: 7 Overall length: 52 mm Shank diameter: 32 mm Weight: 1.37 kg Features & components Compatible inserts: RDMT 1604 Locking screw: M4x10 Torx screw: M4.5x11 Torx key: T20 Upper plate: BSP010 FAQ Which indexable inserts fit this cutter? The T275TM from Teknik Makina is specified for RDMT 1604 indexable inserts; the insert geometry and grade will determine final application suitability. What is the effective cutting diameter and number of teeth? The tool has an effective cutting diameter of 100 mm and is equipped with 7 cutting edges, which supports even load distribution and stable chip formation. How are the inserts secured in the cutter? Inserts are retained with Torx screws M4.5x11 plus a locking screw M4x10 and an upper plate BSP010; a T20 Torx key is used for secure and repeatable seating. What machine interface is required for the toolholder? The cutter is designed for holders accepting a 32 mm shank diameter, so a compatible 32 mm receiver or adapter is required for correct mounting. What are the main dimensions and weight to consider for setup? Key values for the T275TM are: diameter 100 mm, overall length 52 mm, shank 32 mm, and weight 1.37 kg, which should be entered into the balancing and CAM setup. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a precise combination of robust mounting and reliable insert compatibility for steady production results; the cutter’s Ø100 mm diameter and 7 cutting edges deliver consistent material removal and long tool life. Order directly via Metav Werkzeuge or consult the team for application advice. Indexable face mill T466TM — Ø100 mm, 7 cutting edges (Teknik Makina) The Indexable face mill T466TM is a heavy‑duty face milling cutter designed for use with RCKT 1204 indexable inserts, suited to facing and light finishing tasks in general machining and production environments Compatible with RCKT 1204 indexable inserts (Sandvik) Ø100 mm cutter with 7 cutting edges 32 mm arbor connection with Torx fixing Overall length 52 mm, weight 1.608 kg Consistent productivity through optimised cutter geometry The design focuses on reliable, repeatable removal rates: a Ø100 mm cutter diameter combined with 7 cutting edges reduces vibrations and distributes cutting forces evenly, which supports higher feed rates and smoother passes. In practice, this means shorter cycle times and fewer interruptions for edge changes. The round cutting body and balanced layout are engineered to maintain stable contact during axial and radial engagement, translating into uniform chip evacuation and predictable tool life for series production. Fast, secure fixing and straightforward insert replacement Assembly and insert changes are simplified with a solid 32 mm arbor connection and a Torx clamping system. The cutter uses M3.5x8.5 Torx screws and a T15 key size for quick, repeatable fastening; this reduces downtime during index changes and maintenance. The compatibility with RCKT 1204 inserts—commonly stocked by major manufacturers such as Sandvik—ensures access to a wide range of grades and edge geometries, allowing adaptation to steel and general workpiece materials without extensive tooling swaps. Stability and surface quality for workshop requirements Mass and form contribute to the cutter’s stability: an overall length of 52 mm and a mass of 1.608 kg help dampen chatter during operation, improving surface finish and dimensional consistency. The arrangement of multiple cutting edges distributes wear and enables smoother transitions between teeth, which reduces the need for frequent regrinds or early replacement. This combination of precision and robust construction supports both single‑piece setups and batch processing where surface integrity and repeatability matter. Workshop integration, supply reliability and practical support The tool is intended for straightforward integration into standard milling spindles with a 32 mm arbor interface and is compatible with widely available RCKT 1204 indexable inserts. For procurement and spare parts, Metav Werkzeuge acts as a logistics and quality gateway for the European market, offering rapid order processing from Emmerich and access to technical advice. Technical sheets and mounting instructions are available on request, enabling a quick validation of fit and cutting parameters for workshop planners and purchasing professionals. Contact Metav Werkzeuge for tailored advice on cutter selection, insert grades and order options — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data SKU: T466TM Manufacturer: Teknik Makina Product name: Indexable face mill for RCKT 1204 indexable inserts Dimensions & weight Diameter: 100 mm Number of cutting edges: 7 Overall length: 52 mm Arbor connection: 32 mm Weight: 1.608 kg Features & compatibility Compatible inserts: RCKT 1204 Compatible insert manufacturer: Sandvik Torx screw: M3.5x8.5 Torx key size: T15 Intended use: face milling and finishing with indexable inserts FAQ Which insert type fits this face mill? The Indexable face mill T466TM accepts RCKT 1204 indexable inserts; this compatibility allows the use of common grades from suppliers such as Sandvik. What arbor size is required for mounting? A 32 mm arbor connection is specified for the cutter; the clamping system is designed for secure mounting with Torx screws. How many cutting edges are active on the cutter? The cutter has 7 cutting edges, arranged to provide balanced cutting action and improved surface quality. Is the Torx screw and key included? The cutter uses M3.5x8.5 Torx screws and a T15 key for clamping; check the delivery contents at order, as supply packages can vary. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a 100 mm diameter cutter built for reliable face milling, compatibility with RDMT 1003 indexable inserts and a 32 mm shank for stable mounting; combine high removal rates with straightforward insert changes. Order the T295TM directly via Metav Werkzeuge or ask our consultants if needed. T295TM round insert face mill — Ø100 mm, for RDMT 1003 indexable inserts (Teknik Makina) The T295TM round insert face mill is designed as a compact, robust milling head for productive face milling operations with RDMT 1003 indexable inserts. For RDMT 1003 indexable inserts 100 mm diameter for broad surface milling Seven cutting edges for consistent stock removal 32 mm shank for secure toolholder interface Consistent metal removal with round insert technology This milling head is optimised for stable, repeatable face milling where even material removal is essential. The round insert concept with RDMT 1003 geometry distributes cutting forces evenly, which reduces vibration and enables a consistent chip load across passes. Indexable inserts mean the cutting edge is renewed quickly without regrinding the tool body, so setup time is minimised and cycle times are improved. For production environments focused on throughput, the combination of a 100 mm diameter and seven cutting edges supports higher metal removal rates while maintaining surface quality. Secure clamping and service-friendly fastenings Tool retention and maintenance are engineered for workshop efficiency. The cutter is secured with a M3.5 locking screw and supplied Torx fasteners (M3.5x8.5) tightened with a T15 key, which simplifies insert changes and torque control during service intervals. The 32 mm shank offers a rigid interface for modern toolholders and reduces run-out risk, while the measured mass of 1.463 kg contributes to a balanced rotational behaviour. Clear fastening standards make it straightforward to document assembly and torque procedures for quality assurance in serial production. Adaptable milling head for predictable process stability The cutter body allows straightforward integration into standard milling setups and is intended for applications where reliable repeatability is required. With multiple cutting edges distributed around the perimeter, cutting loads are reduced per edge, which can extend insert life and enable smoother feed rates. Maintenance workflows are simplified by the standardised screw and key dimensions, and the modularity of indexable inserts allows rapid adaptation to different grades or coatings without replacing the cutter body. The result is a tool that supports stable machining windows and predictable production output. Contact Metav Werkzeuge for advice on integrating the Teknik Makina T295TM into existing toolpaths and to discuss compatible RDMT 1003 insert grades and clamping recommendations Technical data Article number: T295TM Manufacturer: Teknik Makina Product name: round insert face mill for RDMT 1003 Facts Diameter: 100 mm Cutting edges: 7 Overall length: 50 mm Shank diameter: 32 mm Weight: 1.463 kg Special features Compatible with RDMT 1003 indexable inserts Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 SKU: T295TM FAQ What inserts are required for this cutter? The cutter is specified for RDMT 1003 indexable inserts; compatible insert grades and edge preparations should be selected according to the material and surface finish requirements. How many cutting edges does the milling head use? The tool utilises seven cutting edges distributed around the head to balance cutting forces and support steady material removal. What shank size is needed for the toolholder? A 32 mm shank is specified for the T295TM, ensuring a rigid connection to appropriate toolholders. Which fasteners are used for insert clamping? Insert clamping uses an M3.5 locking screw and M3.5x8.5 Torx screws secured with a T15 key to simplify maintenance and ensure repeatable torque. Is the cutter balanced for high-speed spindle use? The design and mass distribution (1.463 kg) promote stable rotation; final balancing and operational speed should be verified with the chosen insert grade and holder combination. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high‑coverage milling solution that combines a 100 mm cutting diameter, compatibility with RDMT 1003 indexable inserts and secure Torx fastening for reliable repeatability; order directly via Metav Werkzeuge or consult our specialists for application guidance. T295-1TM Round Indexable Face Mill by Teknik Makina — 100 mm, for RDMT 1003 indexable inserts The T295-1TM is a round indexable face mill engineered for stable face and shoulder milling where quick insert change and consistent surface finish are required 100 mm cutting diameter for broad coverage 8 cutting edges for extended productivity 32 mm mounting bore for secure spindle fit Torx T15 fastening for fast, repeatable insert changes Increased material removal with predictable stability The cutter delivers efficient metal removal thanks to its 100 mm diameter and 8 cutting edges, which together expand the effective cutting circle and reduce cycle times per pass. This design spreads cutting forces across multiple inserts, lowering vibration and improving surface finish — a direct advantage in repetitive production runs and when machining stepped features. The use of indexable plates keeps downtime low because worn inserts are simply replaced rather than the whole tool being reground. Fast, secure clamping for consistent results A secure fastening concept is vital for repeatability; the tool features a 32 mm mounting bore and Torx T15 screws (M3.5x8.5) with an M3.5 locking screw, ensuring stable seating and uniform clamp torque. Stable clamping reduces runout and heat build‑up at the insert seat, which translates into longer insert life and fewer dimensional deviations across batches. The straightforward Torx system also speeds up maintenance tasks on the shop floor. Clear compatibility and simple tool setup Designed specifically for RDMT 1003 indexable inserts, the cutter supports commonly available insert geometries for a wide range of roughing and finishing tasks. The practical overall length and balanced construction facilitate setup in typical milling heads and arbors used in workshop and small‑series production environments. Where insert grades and coatings are selected to suit the workpiece material, the assembly offers a cost‑effective route to consistent machining quality. Practical benefits for procurement and production planning With a modest tool weight and compact profile, the cutter suits situations where tool changeover speed and storage economy matter. The combination of multiple cutting edges and easy insert access lowers unit tooling cost over time and simplifies inventory management when standardised RDMT 1003 inserts are used across several tools. For purchasing, Metav Werkzeuge offers the logistical reliability of a central European supply chain and technical advice for tool selection. Contact Metav Werkzeuge for tailored machining advice on the Teknik Makina T295-1TM round face mill — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt guidance and order coordination Technical Data Article number: T295-1TM Brand: Teknik Makina Product: Round indexable face mill Dimensions & Core Data Diameter: 100 mm Number of cutting edges: 8 Mounting bore: 32 mm Overall length: 50 mm Weight: 1.478 kg Materials & Fastening Suitable for: RDMT 1003 indexable inserts Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key size: T15 FAQ Which inserts fit this face mill? The T295-1TM is designed for RDMT 1003 indexable inserts, which are commonly stocked and offer a variety of grades and geometries for different materials. Is the tool stable enough for shoulder milling? Yes. The combination of an optimised 100 mm diameter and secure Torx fastening gives the cutter the stiffness required for controlled shoulder and face milling operations. How does the fastening influence maintenance times? The Torx T15 screw system (M3.5x8.5) enables quick insert changes and repeatable torque application, reducing maintenance time and helping to maintain consistent machining performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of stable clamping and standardised compatibility: the holder’s SCACR 1616 geometry and compact 16 × 16 mm toolhead deliver reliable rigidity for light to medium turning tasks, while the right-hand orientation ensures predictable chip flow and repeatable results; order directly via Metav Werkzeuge or consult the Emmerich team for application advice SCACR-F for CCMT Indexable Inserts — Right-hand turning holder, SCACR 1616 by Teknik Cutting Tools The SCACR-F for CCMT Indexable Inserts is a right-hand turning toolholder engineered for CCMT 09T3 inserts, offering a compact 16 × 16 mm head and a 100 mm overall length for confined turning operations Right-hand turning orientation Compatible with CCMT 09T3 inserts SCACR 1616 toolhead, 16 × 16 mm 100 mm overall length, solid build Stable clamping for consistent turning results This turning holder uses a proven clamping concept to secure indexable inserts reliably under cutting loads. The SCACR 1616 geometry provides a low centre of gravity and short overhang, which improves rigidity and reduces vibration during interrupted cuts. For workshops requiring repeatable diameters and surface finish, the holder’s compact head (16 × 16 mm) and firm insert seating translate into reduced tool chatter and longer insert life, delivering measurable process stability in serial or single-part production. Standard compatibility simplifies tooling decisions Designed specifically for CCMT 09T3 inserts, the holder accepts widely available triangular-turning inserts used across industry. The ISO designation SCACR 1616 denotes the holder’s standardized shank and head dimensions, enabling easy integration with existing toolposts and toolpost adaptors. Using a toolholder that matches common insert formats minimises inventory complexity and facilitates fast replacement during tool changes, supporting efficient shop-floor logistics and predictable machining cycles. Compact geometry for improved access and chip control With a 100 mm overall length and a 90° cutting angle, the holder delivers close access to workpiece shoulders and bores while preserving clearance for chip evacuation. The right-hand cutting direction aligns chip flow away from the operator and fixture in conventional turning set-ups, lowering the risk of entanglement and easing post-process cleaning. The combination of a small head dimension and a robust clamping interface makes this holder especially suitable where tool overhang must be minimised without compromising on clamping security. Arrange an application review with Metav Werkzeuge for the SCACR 1616 turning holder or request tailored advice from our Emmerich specialists to match the holder to the machining task Technical data Article number: D414TM Designation: SCACR-F for CCMT Indexable Inserts ISO designation: SCACR 1616 Manufacturer: Teknik Makina Facts Overall length: 100 mm Toolhead height: 16 mm Toolhead width: 16 mm Cutting angle: 90° Weight: 0.221 kg Cutting direction: Right-hand Special features Compatible inserts: CCMT 09T3 Shank designation: H09-F Right-hand turning holder Compact head for restricted access FAQ Which insert type fits this holder? The holder accepts CCMT 09T3 indexable inserts and is optimised for that insert geometry. What is the ISO designation of the toolholder? The toolholder is listed as SCACR 1616, indicating the standard head and shank dimensions. Is this a right-hand or left-hand holder? This is a right-hand turning holder, designed for conventional right-hand cutting directions. What are the compact dimensions of the toolhead? The toolhead measures 16 × 16 mm, providing a low-profile solution for tight turning applications. What is the overall length of the holder? Overall length is 100 mm, suitable for reduced overhang and better rigidity. Who manufactures this toolholder? The toolholder is produced by Teknik Makina and supplied via Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combine stable 16 × 16 mm shank rigidity, compatibility with DCMT 11T3 indexable inserts and a precise 93° cutting angle to secure reliable left-hand external turning — order via Metav Werkzeuge or consult our specialists for application support. SDJCL 1616 clamping holder — SDJC for DCMT indexable inserts, left-hand, 93° cutting angle The SDJCL 1616 clamping holder is a left-hand toolholder for DCMT 11T3 indexable inserts, designed for stable external turning and straightforward insert changes in workshop and light industrial lathe work. Left-hand turning orientation Compatible with DCMT 11T3 inserts Shank 16 × 16 mm for stable clamping 100 mm overall length for external turning Secure clamping for consistent surface quality The holder is engineered to deliver clamping stability through its 16 × 16 mm shank and compact head geometry, which reduces micro-movement during cuts. With a cutting height 25 mm and a well-defined seating for the insert, the arrangement promotes repeatability from one set-up to the next, translating into improved surface finish and longer insert life. This stability is particularly valuable in batch production and repair work where consistent results matter. Tailored for DCMT inserts and left-hand cutting Compatibility with DCMT 11T3 indexable inserts ensures access to a broad range of grades and geometries for finishing or medium-duty turning. The left-hand configuration and 93° cutting angle give the cutting edge the clearance and support required for secure external turning, while the insert pocket design simplifies indexing and reduces downtime associated with insert changes. The result is a combination of flexibility and operational efficiency for common turning tasks. Reach and rigidity to boost productivity A 100 mm overall length provides practical reach without excessive overhang, helping to minimise leverage and reduced vibration during cuts. At a weight of 0.204 kg the unit balances rigidity with manageable mass for rapid tool changes. Together, these attributes contribute to a cost-efficient machining process: fewer rejects, steadier feeds and the option to run higher effective cutting parameters within the stability limits of the lathe. Quick installation and workshop compatibility The clamping system accepts bar designation H11 and follows established ISO sizing as SDJCL 1616, enabling straightforward integration into existing toolposts and quick-change setups. Its form factor and simple insert access make it suitable for precision workshops, maintenance departments and small-scale production, where dependable toolholding and easy servicing support tight schedules and predictable maintenance intervals. For tailored advice or to order this Teknik Makina SDJCL 1616 clamping holder via Metav Werkzeuge, please contact Metav Werkzeuge directly at info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and fast supply from Emmerich. Technical data SKU: D364TM Manufacturer: Teknik Makina Article designation: SDJC for DCMT Indexable Inserts ISO designation: SDJCL 1616 Facts Shank height: 16 mm Shank width: 16 mm Cutting head width: 20 mm Cutting height: 25 mm Overall length: 100 mm Cutting angle: 93° Weight: 0.204 kg Cutting direction: left Special features Left-hand toolholder For DCMT 11T3 indexable inserts Bar designation: H11 FAQ Which indexable inserts fit this holder? The holder is designed for DCMT 11T3 indexable inserts; the SDJCL 1616 seating supports standard DCMT geometry for quick indexing and replacement. Is this toolholder for left- or right-hand turning? This version is left-hand; the SDJCL 1616 is configured for left-hand cutting operations with a 93° cutting angle. What are the essential dimensions to check before ordering? Key dimensions are shank 16 × 16 mm, cutting head width 20 mm, cutting height 25 mm and overall length 100 mm — SKU D364TM. Which applications suit this clamping holder? The holder is suitable for external turning on lathes in precision workshops and small-scale production, where DCMT inserts provide flexible grades and edge geometries. How does the 93° cutting angle affect performance? A 93° cutting angle provides clearance and robust support at the insert corner, improving edge strength for general external turning while helping to avoid interference with workpiece features. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of 100 mm diameter rigidity, internal coolant and compatibility with APKT 1705 indexable inserts to improve cycle stability and reduce tooling costs; order the component via Metav Werkzeuge or contact our advisors for integration support. Corner tool head – 100 mm diameter, coolant-through, for APKT 1705 indexable inserts (Teknik Makina) Corner tool head designed for stable face and shoulder machining with coolant-through capability and direct compatibility with APKT 1705 indexable inserts 100 mm diameter for stable cutting Internal coolant for optimised chip evacuation Compatible with APKT 1705 indexable inserts Eight cutting edges for prolonged service life Greater machining stability through a rigid 100 mm design The robust 100 mm diameter construction delivers increased stiffness at the cutting zone, which reduces chatter and improves dimensional accuracy during interrupted and continuous cuts. This translates into more consistent surface finishes and fewer rejected parts, especially when working on shoulders and faces. The solid build supports stable spindle engagement, making the assembly suitable for medium to heavy-duty turning and milling tasks where vibration damping is critical. Coolant-through design for consistent surface quality and tool life A coolant-through feed is integrated to supply cutting fluid directly to the insert rake face, promoting effective cooling and chip control. The internal coolant channel helps maintain a lower cutting temperature and reduces built-up edge formation, which extends insert life and preserves surface integrity. For users unfamiliar with coolant-through tooling: directing coolant to the cutting edge improves lubrication at the point of contact and aids reliable chip evacuation in pocketed or shoulder operations. Cost-effective indexable system with wide insert compatibility Engineered for APKT 1705 indexable inserts and compatible with Taegutec variants, the head supports an economical multi-edge workflow. With 8 cutting edges available through indexable rotation and replacement, the tooling cost per component is reduced and machine uptime is increased. The head’s geometry supports a 90° approach to enable precise shoulder cuts and simplifies set-up for repeat operations, delivering predictable, repeatable results in batch production. Practical assembly and maintenance for shop-floor efficiency The head is supplied for secure fastening using a T15 Torx drive and M4x10 screws, enabling straightforward insert clamping and replacement with standard workshop tools. The compact 52 mm overall length facilitates mounting in compact tool holders while the mass of approximately 1.62 kg provides a balanced feel and helps dampen vibration. Clear torque procedures and the use of the specified Torx key preserve clamping integrity and reduce the risk of insert movement during machining. Contact Metav Werkzeuge today to confirm compatibility with existing tool holders and to arrange technical advice for fitting the Teknik Cutting Tools corner head with coolant-through capability – Metav Werkzeuge can supply detailed integration support from Emmerich. Technical data SKU: T558-1TM Product type: Corner tool head Manufacturer: Teknik Makina eClass: 21181015 Diameter: 100 mm Overall length: 52 mm Centre bore: 32 mm Weight: 1.62 kg Cutting edges: 8 Cutting angle: 90° Internal coolant: yes Compatible insert type: APKT 1705 Compatible insert manufacturer: Taegutec Fastening screw: M4x10 Torx key: T15 FAQ What insert type does the head accept? The corner tool head is designed for APKT 1705 indexable inserts and is compatible with inserts from Taegutec, offering flexible choices for grades and coatings. Does the tool support coolant-through (internal cooling)? Yes, the assembly features internal coolant channels that deliver fluid directly to the cutting edge to aid cooling and chip evacuation. How many indexing positions are available per insert? Each insert can be indexed across multiple edges; the head’s design accommodates 8 cutting edges in operational cycles, extending effective insert usage. Which fastening method is specified for insert clamping? Insert clamping uses M4x10 screws tightened with a T15 Torx drive; following recommended torque settings preserves clamping reliability. Is the head suitable for shoulder and face machining? The 100 mm diameter and 90° cutting angle make the head particularly suitable for precise shoulder and face operations where rigidity and repeatability are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Reliable machining results are achieved through the combination of a 100 mm diameter, a 27 mm shank and compatibility with RD-- 1003 indexable inserts, enabling consistent slot profiles and efficient insert replacement. Order or request application advice via Metav Werkzeuge for immediate supply and expert consultation. T-slot cutter TKC183TM — 100 mm diameter, RD-- 1003 compatible (Teknik Makina) A robust T-slot cutter intended for precise T-nut and slot milling tasks, designed to accept RD-- 1003 indexable inserts for industrial production environments 100 mm diameter for standard T-slots 27 mm shank for secure toolholding Compatible with RD-- 1003 indexable inserts Eight cutting edges for smooth feeds Stable geometry for repeatable slot profiles The combination of a 100 mm diameter cutting head and a 27 mm shank delivers a stable cutting geometry that reduces vibration and helps maintain precision across batches. With a solid tool mass of 0.902 kg and an overall length of 120 mm, the design supports consistent axial and radial positioning during high-precision slotting operations. This stability improves repeatability on multi-shift production runs and lowers the risk of rework caused by dimensional drift. Productivity gains from indexable inserts and multiple cutting edges Using RD-- 1003 indexable inserts together with eight cutting edges reduces non-productive time: inserts can be rotated or replaced quickly, and multiple edges extend service intervals. The eight-edge arrangement balances cutting forces and enables smooth feed rates, which can translate into improved cycle times and longer intervals between maintenance interventions. For operations that favour predictable output and short tool-change procedures, the configuration offers clear performance advantages. Fast, service-friendly insert changes Maintenance is simplified by the use of standard Torx fastenings: a T15 key and M3.5 x 8.5 torx screws are specified for secure clamping of the cutting heads. This means insert changes are straightforward and can be completed with common workshop tools, reducing downtime. The cutter’s shank diameter is suited to conventional toolholding systems, allowing straightforward integration with existing machining setups without the need for bespoke adaptors. Intended use and procurement clarity Labelled as “100mm T-Nut Fräser RD-- 1003 L120mm” and identified by SKU TKC183TM, the tool is supplied by Teknik Makina and is tailored for industrial slot-milling tasks where indexable insert technology is preferred. At 120 mm overall length the tool offers a practical balance between overhang and rigidity for many standard applications. For specification checks or to confirm fitment in a particular machine or holder, technical advice is available from Metav Werkzeuge to ensure correct selection and fast delivery. Contact Metav Werkzeuge today for application guidance and to secure Teknik Cutting Tools' TKC183TM T-slot cutter with RD-- 1003 compatibility, delivered from Emmerich with expert procurement support. Technical Data Article number: TKC183TM Brand: Teknik Makina Label: 100mm T-Nut Fräser RD-- 1003 L120mm Facts Diameter: 100 mm Overall length: 120 mm Weight: 0.902 kg Shank diameter: 27 mm Cutting edges: 8 Special features Compatible with RD-- 1003 indexable inserts Torx key required: T15 Torx screws: M3.5 x 8.5 Product type: T-slot cutter FAQ What insert type does this cutter use? The cutter is designed for RD-- 1003 indexable inserts, which can be rotated or replaced for efficient maintenance of the TKC183TM. How many cutting edges are fitted and what is the benefit? The tool features eight cutting edges, offering balanced cutting forces and smoother feed behaviour, which supports consistent surface quality. Which shank diameter is specified for the toolholder? The cutter has a 27 mm shank, suitable for conventional toolholding systems and designed to provide secure clamping and rigidity. What fastening hardware is required for insert changes? Insert clamping uses M3.5 x 8.5 torx screws with a T15 key for reliable and service-friendly maintenance. Can Metav Werkzeuge confirm compatibility with an existing machine? Metav Werkzeuge can advise on fitment and selection to ensure the Teknik Cutting Tools TKC183TM integrates correctly with a specific machining setup Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of high material removal per pass, stable clamping and simple insert replacement for efficient T-slot production; order the cutter directly via Metav Werkzeuge or consult the technical team for application advice. T-Nut Cutter TKC188TM by Teknik Makina — 100 mm diameter, compatible with RD--12 indexable inserts T-nut cutter TKC188TM designed for machining precise T-slots in industrial milling applications, compatible with RD--12 indexable inserts and a robust 27 mm shank for stable clamping 100 mm diameter for high stock removal Compatible with RD--12 indexable inserts 27 mm shank for rigid clamping Faster T-slot production with fewer tool passes The 100 mm tool diameter reduces the number of passes required to create a T-slot, directly improving cycle times on production and job-shop machines. A larger cutter diameter also spreads cutting forces across multiple edges, resulting in more consistent material removal and a predictable machining process. For operations where throughput matters, this cutter offers a pragmatic balance between productivity and finish quality, enabling shorter lead times without compromising slot geometry. Stable cutter geometry for improved surface and accuracy Featuring a 27 mm shank and an overall mass that dampens vibration, the tool provides a secure interface with standard toolholders and heavy-duty boring heads. The arrangement of the 8 cutting edges contributes to balanced cutting dynamics, which helps reduce chatter and delivers a cleaner slot floor and walls. Indexable insert technology simplifies maintenance: worn inserts are replaced quickly and consistently, restoring cutting performance without the need for regrinding the whole tool. Practical compatibility and secure insert clamping The cutter is specified for RD--12 indexable inserts and uses a M3.5x8.5 Torx screw for each pocket, driven with a T15 Torx key. This established clamping approach ensures repeatable insert seating and stable cutting under moderate to heavy engagement. Integrating the cutter into an existing tooling set is straightforward: the standard shank diameter and insert family keep stocking costs low while enabling fast on-machine insert changes, reducing downtime and increasing overall equipment effectiveness. Contact Metav Werkzeuge for tailored machining advice and to procure the Teknik Makina TKC188TM T-nut cutter; email info@metav-werkzeuge.com or call +49 2822 7131930 for immediate assistance Technical data SKU: TKC188TM Label: 100mm T-nut cutter RD-- 12 L50mm Manufacturer: Teknik Makina Facts Diameter: 100 mm Total length: 50 mm Weight: 0.915 kg Shank diameter: 27 mm Cutting length (shank/edge): 27 mm Cutting edges: 8 Torx key size: T15 Torx screw: M3.5x8.5 Special features Compatible with RD--12 indexable inserts Robust shank for reduced vibration Indexable insert system for quick replacement Balanced cutter geometry for stable cutting FAQ What insert family is required for this cutter? The cutter is designed for RD--12 indexable inserts and secures the inserts with M3.5x8.5 Torx screws as used on the TKC188TM. Can the cutter be mounted in any standard toolholder? Yes, the 27 mm shank dimension allows mounting in standard heavy-duty holders and boring systems that accept 27 mm shanks, providing stable clamping for consistent slot geometry. How are worn inserts replaced and secured? Worn inserts are replaced individually; each seat uses a M3.5x8.5 Torx screw tightened with a T15 key to ensure secure, repeatable clamping and quick on-machine service. Is the cutter suitable for high-feed roughing of T-slots? The large 100 mm diameter and multiple cutting edges make it suitable for efficient roughing passes where high material removal rates are required, while insert changes restore cutting performance quickly. What is the SKU for ordering and referencing this cutter? Reference the SKU TKC188TM when enquiring or ordering to ensure the correct 100 mm T-nut cutter variant is supplied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, standardised holder that combines precise 16 x 16 mm geometry with a 100 mm overall length for secure set-ups and consistent right-hand machining performance; order directly via Metav Werkzeuge or consult our specialists for application advice. Clamp holder L100 mm — 16 x 16 mm, right-hand, Teknik Makina A Clamp holder L100 mm designed as a compact toolholder for clamping operations in turning and general machining where a 90° cutting angle and right-hand orientation are required. 16 x 16 mm compact shank 100 mm overall length for tight set-ups Right-hand configuration, 90° cutting angle ISO 2020 designation for standard compatibility Precision and repeatability for compact toolrooms The holder’s 16 x 16 mm cross-section and 100 mm overall length deliver a small footprint while maintaining rigidity for short overhangs. This geometry reduces vibration and improves surface finish, which translates into fewer rework cycles and steadier process control. By using a standardised shank dimension and an ISO 2020 designation, the unit enables quick exchangeability in modular toolstations and simplifies tooling inventories for small-to-medium workshops and production lines alike. The compact design supports higher spindle speeds in many turning tasks without compromising stability. Clear specification for machine integration With a defined 90° cutting angle and right-hand cutting direction, the toolholder is straightforward to integrate into existing setups that rely on orthogonal tool orientation. The nominal mass of 0.218 kg contributes to low centrifugal loads during operation and helps with predictable dynamic behaviour on turret or quick-change systems. Technical teams benefit from explicit numeric values when calculating runout, overhang and fixture loads, making the holder a pragmatic choice where engineering certainty is required rather than guesswork. Practical benefits for everyday workshop use The clamping design focuses on secure retention and rapid replacement, shortening set-up times and supporting lean workflows. The compact dimensions aid access to tight components and fixtures, while the standard ISO 2020 form factor ensures compatibility with a wide range of clamping accessories and toolposts. For production managers, this means reduced tooling complexity and a consistent basis for process documentation and quality control; for machinists, it means predictable tool behaviour and fewer interruptions during runs. Contact Metav Werkzeuge to discuss how the Teknik Makina clamp holder L100 mm fits into existing tooling systems or to request a direct supply from our Emmerich warehouse Technical data Article number: D417TM Label: Klemmhalter L100mm Product type: Klemmhalter EClass: 21181004 Core data Overall length: 100 mm Shank width: 16 mm Shank height: 16 mm Cutting-head width: 16 mm Cutting height: 16 mm Weight: 0.218 kg Special features Right-hand cutting direction Cutting angle: 90° ISO designation: 2020 Manufacturer: Teknik Makina FAQ What size shank does this holder use? The clamp holder uses a 16 x 16 mm shank profile, specified to simplify mounting and tooling selection. Is the holder suitable for left-hand turning? This particular variant is configured for right-hand cutting; left-hand versions would require the corresponding orientation. Which ISO format does the toolholder follow? The unit follows the ISO 2020 designation, ensuring compatibility with standard clamping systems and accessories. How long is the holder and how does that affect overhang? The overall length is 100 mm, which is intended for compact setups and minimised overhang to reduce vibration. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of secure clamping, compact dimensions and standardised fastenings for reliable left‑hand turning operations; order via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. Clamp holder for SCMT 09T3 indexable inserts — 100 mm, left-hand (Teknik Makina) The Clamp holder SCMT 09T3 L100mm is a left‑hand turning toolholder engineered to secure SCMT 09T3 indexable inserts for stable, repeatable machining in general turning applications. Secure clamp for SCMT 09T3 inserts 100 mm shank length for reduced overhang Left-hand cutting direction for specific toolpaths Robust 16×16 mm shank cross-section Reliable clamping that improves surface finish and repeatability The Clamp holder SCMT 09T3 L100mm is designed for secure clamping of SCMT 09T3 indexable inserts using a M4x10 Torx screw, enabling consistent clamping force and repeatable insert positioning. A reliably fastened insert reduces vibration and tool chatter, which directly improves surface finish and dimensional accuracy. The standardised Torx drive and screw size ensure straightforward replacement of inserts with common workshop tools, shortening tool change times and maintaining production flow. Compact dimensions that preserve rigidity in tight setups With a 100 mm overall length and a 16×16 mm shank cross‑section, this holder balances accessibility with stiffness. The modest overhang reduces bending moments at the toolpost, so rigidity is kept high even in confined setups. A 20 mm cutting head width and 20 mm cutting height provide the necessary support for the insert seating, allowing the toolholder to be used where space is limited without compromising stability or cutting performance. Purpose-built for left-hand turning and 45° approach angles Engineered for left‑hand turning operations, the holder accommodates a 45° cutting angle, which is suited to many profiling and angled turning tasks. The geometry directs chip flow predictably and enables controlled engagement with the workpiece, improving process reliability. Integrating a tool designed for the intended cutting direction simplifies programming and fixturing, particularly when paired with compatible inserts and lathe toolposts. Standardised fittings for fast maintenance and integration The toolholder adopts ISO‑style designation 1616 and uses common workshop tooling — a Torx T15 key for the M4x10 screw — so routine maintenance and insert changes are straightforward. At a weight of 0.193 kg, the holder is lightweight to handle yet substantial enough to contribute to stable cutting. The SKU D468TM identifies the exact configuration for ordering and inventory control, ensuring quick replacement and traceability within a production setting. For application advice or to secure this Teknik Makina clamp holder (SKU D468TM) for left‑hand turning, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and delivery options. Technical data Article number: D468TM Manufacturer: Teknik Makina Product type: Clamp holder Facts Overall length: 100 mm Shank width: 16 mm Shank height: 16 mm Cutting head width: 20 mm Cutting height: 20 mm Weight: 0.193 kg Cutting angle: 45° Cutting direction: left Torx screw: M4x10 Torx key: T15 Special features Compatible with SCMT 09T3 indexable inserts ISO designation: 1616 Left‑hand orientation for turning operations Standardised Torx fastening for quick insert changes FAQ Which inserts are compatible with this holder? The holder is designed for SCMT 09T3 indexable inserts and secures them with the standard M4x10 Torx screw configuration used in this family of tooling. Is the holder suitable for heavy‑duty turning? The clamp holder’s 16×16 mm shank and 100 mm length deliver good rigidity for many turning tasks; for heavy‑duty cuts, consult process parameters to verify suitability. What tool is required to replace an insert? Insert changes use a Torx T15 key to tighten or loosen the M4x10 screw supplied on the clamp holder. Can this holder be used for right‑hand operations? This specific model is configured for left‑hand cutting direction; a right‑hand variant should be used for opposite toolpath orientations. How is the holder identified for ordering and stock? Order using SKU D468TM to ensure the correct left‑hand clamp holder configuration for SCMT 09T3 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Taking advantage of the right-hand 45° cutting geometry and the secure clamping interface for SCMT 09T3 indexable inserts ensures repeatable turning results and reduced setup time; order the clamping holder directly via Metav Werkzeuge or contact our consultants for tailored advice. Clamping holder for SCMT 09T3, L100 mm by Teknik Makina The Clamping holder for SCMT 09T3, L100 mm is a right-hand turning holder designed for secure clamping of SCMT 09T3 indexable inserts in light to medium turning operations. For SCMT 09T3 indexable inserts 100 mm overall length 16 x 16 mm shank size Right-hand, 45° cutting angle Consistent chip control and machining accuracy The holder is built to deliver stable clamping and a predictable chip flow thanks to its 45° cutting angle, which directs chips away from the workpiece and toolpost. Compatibility with SCMT 09T3 indexable inserts means the insert geometry and seat fit are standardised, reducing variability between setups. This results in improved surface finish and fewer interruptions for insert adjustments, a tangible benefit for small-batch production and repetitive machining tasks. The design supports reliable tool life and helps maintain tolerance adherence during serial turning. Compact dimensions that simplify toolpost integration With an overall length of 100 mm and a shank cross-section of 16 x 16 mm, the holder offers a compact footprint that fits most standard toolposts and turrets. The modest mass (≈ 0.193 kg) reduces centrifugal load on high‑speed turrets and eases manual handling during changeovers. The clamping screw specification M4x10 with Torx drive T15 provides a secure mechanical joint; using the correct Torx key prevents cam-out and ensures consistent screw preload, which directly supports cutting stability and reproducible clamping force across shifts. Durable interface and practical workshop advantages Designed for routine use in professional workshops, the holder features a defined seat and clamping arrangement that keeps the insert firmly in place under cutting loads common in turning. The right-hand orientation suits standard turning operations where feed proceeds from left to right, and the holder’s geometry permits simple insert indexing without repositioning the toolholder. For procurement and inventory management the SKU D464TM identifies this exact variant, enabling straightforward reordering and quality traceability through Metav’s supply chain. For personalised material compatibility checks or to reserve the Teknik Makina clamping holder D464TM for upcoming projects, contact Metav Werkzeuge for expert guidance and fast dispatch from Emmerich. Technical data SKU: D464TM Product: Clamping holder for SCMT 09T3, L100 mm Manufacturer: Teknik Cutting Tools / Teknik Makina Cutting direction: right Facts Overall length: 100 mm Shank width: 16 mm Shank height: 16 mm Cutting head width: 20 mm Cutting height: 20 mm Weight: 0.193 kg Cutting angle: 45° Torx screw: M4x10 Torx key size: T15 ISO designation: 1616 Special features Compatibility with SCMT 09T3 indexable inserts Right-hand turning geometry Compact 16 x 16 mm shank for standard toolposts Standard Torx clamping screw for secure fixing FAQ Which inserts fit this holder? The clamping holder accepts SCMT 09T3 indexable inserts; the seat and clamp are sized for that insert designation to ensure a correct fit and repeatable positioning. Is the holder suitable for left-hand turning? This variant is specified as right-hand; for left-hand operations a left-hand holder should be selected to match feed direction and tool geometry. What is the article number for reordering? The SKU for ordering is D464TM, which identifies the 100 mm length holder for SCMT 09T3 from Teknik Makina. Which screw and key are required for the clamping screw? The clamping screw is M4x10 and requires a Torx T15 drive to achieve the correct torque and prevent cam-out. Can this holder be used in automated turret systems? Yes; the compact 16 x 16 mm shank and the controlled mass (≈ 0.193 kg) make it suitable for many turret and toolpost systems that accept this shank size and ISO-style holders. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact combination of secure clamping and precise geometry for reliable turning performance; the 100 mm length with a 16 x 16 mm shank and right-hand 90° cutting angle ensures stable setups and consistent tool life — order directly via Metav Werkzeuge or consult our specialists for application advice. Clamping Holder for CCMT 09T3 Indexable Inserts – 100 mm, right-hand toolholder by Teknik Makina The Clamping Holder for CCMT 09T3 Indexable Inserts is a right-hand turning toolholder engineered to secure CCMT 09T3 turning inserts for industrial lathe applications. *Secure clamp for CCMT 09T3 inserts 16 x 16 mm shank for stable mounting 100 mm overall length for reach Right-hand 90° cutting geometry Stable machining through precise clamping This toolholder delivers consistently stable turning thanks to a secure clamping arrangement tailored for CCMT 09T3 indexable inserts. The 16 x 16 mm shank provides a rigid connection to the toolpost, reducing vibration and improving dimensional repeatability. A reduced vibration environment extends insert life and lowers scrap rates, which translates directly into improved throughput and lower per-part costs for production runs. The design supports repeatable fits and straightforward regripping, making it suitable for workshop and industrial machining tasks. Faster set-ups and reliable fastening Quick and reliable assembly is enabled by the included M3.5x11 Torx screw and the T15 drive, which create a secure mechanical joint without complex adjustments. The combination of a robust clamping screw and a defined seating surface prevents insert movement during cutting, reducing the need for frequent rechecks. Because indexable inserts present multiple cutting edges, the holder’s secure fixation allows economical rotation of the insert rather than complete replacement, improving operational efficiency and cutting edge utilisation. Built for consistent cutting geometry and access Engineered with a 90° cutting angle and right-hand orientation, the holder ensures predictable chip formation and controlled cutting forces in conventional turning operations. The 100 mm overall length offers extended reach for components with deeper profiles while the compact cross-section maintains rigidity at the cutting point. These dimensional choices balance accessibility and stiffness, helping to preserve surface finish quality and dimensional accuracy on turned parts. Seamless integration into workshop workflows Supplied as a ready-to-fit toolholder, the unit integrates easily into standard lathe toolposts and is suitable for series production as well as one-off jobs. Marked with SKU D415TM, it is compatible with established insert geometries and can be stocked alongside other holders to simplify tool management. Backed by the practical logistics of Metav Werkzeuge, the holder supports uninterrupted supply chains and predictable replenishment for manufacturing environments. For procurement or detailed application guidance on the Teknik Makina clamping holder, contact Metav Werkzeuge in Emmerich for tailored technical advice and availability. Technical data Article number: D415TM Product: Clamping holder for CCMT 09T3 indexable inserts Manufacturer: Teknik Makina Facts Overall length: 100 mm Shank width: 16 mm Shank height: 16 mm Cutting-head width: 16 mm Cutting height: 20 mm Weight: 0.216 kg Cutting direction: right Cutting angle: 90° ECLASS: 21181004 Special features Compatibility with CCMT 09T3 indexable inserts Torx screw M3.5x11 Torx drive T15 ISO designation 1616 FAQ What inserts fit this toolholder? The Clamping Holder for CCMT 09T3 Indexable Inserts accepts CCMT 09T3 turning inserts; the clamping geometry is matched to that insert form for secure seating. Is this holder suitable for right-hand turning only? Yes, the holder is specified for right-hand cutting and is designed to perform optimally in right-hand turning operations. Which fastening hardware is used to secure the insert? Fastening is achieved with an M3.5x11 Torx screw and a T15 drive, providing a secure and repeatable connection. How is the holder identified for ordering? The item is listed under SKU D415TM and supplied by Teknik Makina; use this SKU when checking stock or placing orders. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

High-rigidity clamping for DCMT 11T3 indexable inserts combines a compact 16×16 ISO 1616 shank with a 100 mm overall length for secure mounting and consistent chip control; its right-hand 93° cutting configuration supports stable turning cycles. Order the clamping holder directly via Metav Werkzeuge or ask our consultants if needed. Clamping holder for DCMT 11T3 (L100 mm) — right-hand tool holder with 16×16 shank (Teknik Makina) A Clamping holder for DCMT 11T3 (L100 mm) engineered for accurate right-hand turning and reliable insert retention in workshop and light-industrial lathe setups. ISO 1616 16×16 shank for stable mounting Compatible with DCMT 11T3 indexable inserts Right-hand orientation with 93° cutting angle 100 mm overall length, robust clamping with 3 Allen Precision and rigidity for repeatable turning A compact holder with an ISO 1616 16×16 shank provides a stable interface between tool post and cutting edge, reducing deflection during operation. The reduced overhang at 100 mm overall length shortens lever arm forces, which improves dimensional repeatability when performing succession turning tasks. For workshops seeking measurable process improvements, the combination of shank geometry and solid construction translates into fewer reworks and more consistent cycle times. Geometry tuned for controlled cutting forces The right-hand orientation and 93° cutting angle position the insert for predominantly radial engagement, helping to direct chips away from the workpiece and tool post. The 20 mm cutting head width and 28 mm cutting height support appropriate insert projection and contact surface for DCMT 11T3 grades. These dimensions explain why the holder is suitable for general turning where chip control and tool stability are decisive for surface finish and tool life. Practical clamping and serviceability in daily use Clamping is achieved with a secure three‑hex arrangement (supplied key: 3 Allen), allowing quick insert changes and firm seat tightening. At a mass of 0.236 kg, the holder is easy to handle during tool set-up while remaining rigid in operation. The robust clamping detail reduces micro-movements that can accelerate insert wear. For maintenance, familiar workshop tools suffice; the straightforward design keeps downtime low and replacement straightforward. Application focus and workshop advantages Designed for DCMT 11T3 indexable inserts, this holder is intended for routine right-hand turning in toolrooms and production benches where reliability and repeatable geometry matter. The compact profile and industry-standard shank aid compatibility with common tool posts and quick-change systems. For procurement and process planning, the proven mechanical concept supports uninterrupted production and easier tool inventory standardisation. For application advice and supply of Teknik Makina clamping holders contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930 to discuss specifications and delivery from Emmerich Technical data Article number: AP106TM Label: Klemmhalter DCMT 11T3 L100mm Manufacturer: Teknik Makina Core dimensions Overall length: 100 mm Weight: 0.236 kg Shank width: 16 mm Shank height: 16 mm Cutting head width: 20 mm Cutting height: 28 mm Cutting angle: 93° Direction: right Features ISO designation: 1616 Clamping key: 3 Allen Compatible inserts: DCMT 11T3 Product type: Clamping holder SKU: AP106TM FAQ What inserts fit this holder? The holder is specified for DCMT 11T3 indexable inserts; the seat and clamping geometry are matched to this insert family for correct seating and chip control. Is this holder suitable for left-hand turning? This version is configured for right-hand turning with a 93° cutting angle; left-hand operations require the corresponding left-hand holder. What toolpost shank does the holder use? The shank follows ISO 1616 (16×16) dimensions, ensuring stable mounting in compatible tool posts and quick-change adaptors. How is the insert clamped and serviced? Insert retention uses a three‑hex clamping arrangement with the supplied 3 Allen key for fast removal and reinstallation while maintaining repeatable clamping force. What is the article number and brand? Article number AP106TM, manufactured by Teknik Makina and distributed via Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust design with a 90° cutting angle and compatibility with TPKN 2204 indexable inserts to secure consistent shoulder milling and fast insert changes. Order through Metav Werkzeuge for reliable supply or consult the technical team for specification support. Corner cutter head — indexable corner cutter head, Ø250 mm, 90° cutting angle (Teknik Makina) The corner cutter head is a precision milling head engineered for indexable-insert operations, designed to accommodate TPKN 1603–2204 inserts for productive shoulder and face milling in workshop and production environments Compatible with TPKN 2204 inserts 90° cutting angle for consistent shoulders Ø250 mm diameter for broad removal 60 mm bore for standard toolholders Consistent shoulder quality through defined geometry The robust geometry of this milling head ensures reproducible shoulder faces by combining a 90° cutting angle with support for TPKN 2204 indexable inserts. The result is predictable cutting behaviour and reduced rework: the arrangement of cutting edges stabilises the contact zone, which helps to maintain surface quality across repeated operations. This stability benefits setups where repeatability and process control are priorities, as the head’s design reduces the need for frequent fixture adjustments. Secure clamping and straightforward maintenance A sizeable 60 mm bore and defined fastening hardware such as the M8x24 locking screw and M4x10 socket screw give a secure connection to compatible spindles and adaptors, while the TA012 clamp plate aids precise insert seating. The assembly is maintained with a 5 mm Allen key, simplifying routine insert changes and reducing time at the machine. The assembly mass of 8.166 kg contributes to rotational stability, lowering vibration and supporting longer tool life when used within appropriate operating parameters. High material removal potential with balanced cutting Equipped with 9 cutting edges and an effective Ø250 mm diameter, the tool body provides balanced cutting action for larger section passes. The compact 62 mm overall length keeps the cutter close to the spindle, improving rigidity for demanding passes. Multiple edges distribute cutting forces, which helps to moderate peak loads on individual inserts and can lead to steadier cycle times during heavier machining sequences. Compatibility, identification and planning for integration The head is supplied under SKU T113TM and originates from Teknik Makina, enabling straightforward procurement and traceability for inventory management. The standardised clamp and screw sizes make it compatible with many common toolholder systems; planners can therefore integrate the component into existing tool sets with minimal adapter requirements. If further dimensional verification or balancing data is needed for machine-specific integration, Metav Werkzeuge’s technical advisers can provide clarifications to support planning and setup. For supply and expert advice on using the Teknik Cutting Tools corner cutter head T113TM in specific machining setups, contact Metav Werkzeuge for ordering and technical consultation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T113TM Brand: Teknik Makina Designation: Corner cutter head (Eckmesserkopf) For inserts: for TPKN 1603-2204 Indexable Inserts Numbers / Core technical data Diameter: 250 mm Mount bore (D): 60 mm Overall length: 62 mm Weight: 8.166 kg Cutting angle: 90° Cutting edges: 9 Design / Special features Compatible inserts: TPKN 2204 Locking screw: M8x24 Socket screw: M4x10 Clamp plate: TA012 Allen key size: 5 FAQ Which inserts are compatible with this cutter head? The cutter head accepts TPKN 1603–2204 indexable inserts; compatibility is indicated under SKU T113TM and by the Teknik Makina designation. What are the key mounting dimensions to check before installation? Confirm the 60 mm mount bore and a machine interface suited to a Ø250 mm cutter, plus the required securement for an 8.166 kg assembly. How many cutting edges does the head provide and what is the effect? The tool body features 9 cutting edges, which helps to balance cutting forces and support steady material removal on broader passes. Which fasteners and tools are needed for insert changes? Insert retention uses an M8x24 locking screw and M4x10 socket screws; a 5 mm Allen key is specified for routine maintenance. Can this cutter head be identified for procurement and traceability? Yes — order and reference by SKU T113TM and brand Teknik Makina for consistent sourcing and inventory control. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the 90° cutting geometry and APMT 0602 compatibility to standardise tool holders and reduce changeover time; the compact 10 mm shank and secure Torx clamping ensure repeatable seating and stable cutting performance — order directly via Metav Werkzeuge or ask the consultants for integration advice. Shaft cutter S009TM — 90° shank cutter for APMT 0602 indexable inserts (Teknik Makina) Shaft cutter S009TM for 90° shoulder milling using APMT 0602 indexable inserts, designed for machinists and job-shop environments where consistent seating and fast insert changes support productivity 90° shoulder cutting geometry Compatible with Korloy APMT 0602 inserts 10 mm shank for secure clamping Two cutting edges for stable performance Consistent shoulder milling from 90° geometry The 90° geometry provides predictable shoulder faces and right-angled pockets while simplifying toolpath planning. Fitted for APMT 0602 indexable inserts, the cutter gives a modular approach: the insert carries the cutting grade, while the shank provides rigidity and repeatability. This separation reduces tooling complexity on the shop floor and supports a steady surface finish when the insert grade and machining parameters are matched to the job. Fast insert changes and robust clamping to reduce downtime Quick and reliable insert retention is enabled by the included Torx M2x4,2 screw and compatible T6 key, which secure the insert without the need for elaborate fixtures. The 10 mm shank balances rigidity with compactness, helping to minimise chatter in short overhang set-ups. With two cutting edges, the tool offers stable cutting behaviour while keeping changeover frequency low, so set-up times are shortened and machine uptime is improved. Adaptable system through indexable inserts for varied applications Using indexable inserts such as APMT 0602 allows the cutting edge material to be selected independently from the holder, enabling adaptation to different workpiece materials and finishes. The cutter accepts Korloy-manufactured inserts, offering a wide range of available grades and chipformers. For workshops that require flexibility without stocking multiple solid tools, this modularity supports efficient inventory management and fast reaction to changing production demands. Compact design for shop-floor efficiency and handling With an overall length of 120 mm and a cutting length of 30 mm, the shank profile is designed for common milling operations with controlled reach. The lightweight construction (approx. 0.085 kg) makes tool handling and storage straightforward and reduces the inertia during manual set-up. The combination of stable shank diameter, precise fixing and standardised insert mounting supports consistent part tolerances and simplifies integration into existing tool cycles. Contact Metav Werkzeuge for personalised advice on integrating the Teknik Makina S009TM shaft cutter into existing tool sets and benefit from prompt delivery from Emmerich Technical data Article number: S009TM Manufacturer: Teknik Makina E-class: 21180806 ETIM: EC011860 Shank diameter: 10 mm Cutting length: 30 mm Overall length: 120 mm Weight: 0.085 kg Insert type: APMT 0602 Compatible insert maker: Korloy Cutting edges: 2 Cutting angle: 90° Torx screw: M2x4,2 (Torx key T6) FAQ Which insert type does this cutter accept? The cutter is designed for APMT 0602 indexable inserts; Korloy inserts in the APMT 0602 format are compatible with the holder. How is the insert secured in the holder? Insert clamping is provided by a Torx M2x4,2 screw; a T6 key is used for tightening to ensure reliable seating and repeatable positioning for the S009TM shaft cutter. What shank size is provided for machine mounting? The tool features a 10 mm shank diameter, offering a compact footprint and secure clamping in standard collets or tool holders. Is the cutter suitable for right-angled shoulder milling? Yes — the 90° cutting angle is intended for shoulder and face milling where square corners or flat faces are required, using the appropriate insert grade. What are the overall dimensions and weight? The holder has an overall length of 120 mm, a cutting length of 30 mm and a weight of approximately 0.085 kg, providing a compact and manageable tool for workshop use. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of precise 90° cutting geometry, a compact 10 mm shank and compatibility with APMT 11T3 indexable inserts for efficient shoulder milling and reduced tooling costs; order the shank cutter directly via Metav Werkzeuge or consult our advisors if specification support is required. Shank cutter for APMT 11T3 indexable inserts (90°) — Teknik Makina Shank cutter for APMT 11T3 indexable inserts designed for shoulder milling and compact toolholder set-ups 90° cutting geometry for shoulder milling Compatible with APMT 11T3 indexable inserts 10 mm shank for compact toolholders Torx M2.5 fixing, T8 key specification Precise compatibility for systematic machining efficiency The insert milling cutter is engineered around the APMT 11T3 system to provide consistent seating and repeatable performance with Korloy-style indexable inserts. The 90° cutting geometry offers true shoulder profiles without extra passes, reducing cycle time while maintaining surface quality. The tool’s 10 mm shank and 85 mm overall length suit compact toolholders and shorter overhangs; this reduces vibration and improves stability during interrupted cuts. Where set-up time is critical, the Torx fixing ( Torx M2.5 ) ensures fast and secure insert changes, supporting predictable production flow. Lower tooling cost and straightforward handling in the workshop Using indexable inserts makes maintenance and cost management more transparent: only the insert is replaced when worn, rather than the whole cutter. The shank cutter’s 20 mm cutting length and single cutting edge geometry concentrate cutting forces for efficient chip formation and easy chip evacuation. At a weight of 0.059 kg, the tool contributes only minimal additional spindle load, which helps maintain spindle life and balance. For operations migrating from solid cutters, the modular approach offers rapid adaptation and measurable savings over multiple tool life cycles. Practical application, set-up tips and service orientation The tool is suitable for general face and shoulder milling tasks in small to medium batch production and retrofit CNC operations where Korloy APMT 11T3 inserts are already in use. The Torx screw specification aids reliable clamping; use a T8 key for correct torque and safe seating of the insert. For customers who need confirmation of fitment or drawings for CAM programming, technical documentation is available through Metav’s advisors. The combination of compact design and indexable inserts supports operational flexibility and straightforward inventory management in any workshop. For tailored technical advice or to request datasheets and drawings, contact Metav Werkzeuge in Emmerich — our specialists will advise on integration, compatible inserts and drawing specifics to match the application Technical data Article number: S222TM Manufacturer: Teknik Makina Product name: Shank cutter for APMT 11T3 indexable inserts Compatible inserts: Korloy APMT 11T3 Torx screw: M2.5x5.5 Torx key: T8 Shank diameter: 10 mm Cutting length (shank): 20 mm Overall length: 85 mm Cutting edges: 1 Weight: 0.059 kg Cutting angle: 90° Facts Shank diameter: 10 mm Cutting length: 20 mm Overall length: 85 mm Cutting edges: 1 Weight: 0.059 kg SKU: S222TM Cutting angle: 90° Special features Compatibility with Korloy APMT 11T3 inserts Torx M2.5 fixing screw for secure clamping Single-cutting-edge design for shoulder milling Compact 10 mm shank for short overhangs Lightweight construction to reduce spindle load Suitable for insert replacement to lower tooling costs FAQ Is this cutter compatible with Korloy APMT 11T3 inserts? Yes. The shank cutter is specified for APMT 11T3 indexable inserts and is compatible with Korloy APMT 11T3 types. What are the exact mounting specifications for the insert? The tool uses a Torx retaining screw M2.5x5.5 and requires a T8 key for correct seating; the design ensures repeatable clamp force for the insert. What applications suit this cutter best? It is intended for shoulder and face milling in compact toolholder set-ups where a 90° cutting geometry and short overhangs are advantageous. How does the modular insert approach affect tooling costs? By using indexable inserts, only the insert needs replacement when worn, which reduces overall tooling expenditure compared with replacing solid cutters. What is the SKU and who manufactures the cutter? The SKU is S222TM and the cutter is manufactured by Teknik Makina. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precision 95° geometry, compact dimensions and internal coolant for consistent, high-quality turning results; benefit from quick insert replacement and reduced downtime — order the boring bar directly via Metav Werkzeuge or ask their consultants for detailed application advice. Teknik Makina KA102TM Boring Bar A08H SCLCR — 95° for CC-- 0602 Inserts, Ø10 mm The boring bar is a 95° right-hand turning tool designed for indexable CC-- 0602 inserts, offering compact length for confined machining operations 95° cutting geometry for stable cuts Internal coolant for chip evacuation Compatible with CC-- 0602 inserts Compact Ø10 mm, 100 mm overall length Consistent cutting performance with 95° geometry The 95° design of this tool delivers a stable cutting geometry that reduces vibration during turning operations, translating into improved surface finish and repeatable results. Specified to ISO as A08H SCLCR, the tool shank and head geometry are optimised for radial support and steady chip formation. As a result, workshops benefit from fewer reworks and more predictable cycle times when performing right-hand turning tasks with indexable tooling. Superior chip control thanks to internal coolant Equipped with internal coolant, the bar channels cutting fluid directly to the cutting zone to assist chip evacuation and temperature control. This targeted coolant supply helps preserve insert life and maintain cutting-edge integrity, particularly in demanding materials and continuous runs. Compatibility with CC-- 0602 indexable inserts means convenient insert changes and consistent cutting conditions, reducing set-up time and inventory complexity. Compact dimensions for tight setups and reduced overhang With an external diameter of Ø10 mm, a shank diameter of 8 mm and an overall length of 100 mm, the tool is designed for use in restricted tool post arrangements and compact machining centres. The short overhang and modest weight support improved rigidity, which benefits precision turning and contributes to longer tool life. The cutting height of 16 mm ensures proper engagement with the insert when used in compatible holders. Practical fit for industrial and workshop environments The tool is engineered for routine production and maintenance environments where interchangeability and serviceability are essential. The ISO designation facilitates selection of matching holders and insert grades, while the right-hand cutting direction suits standard lathe setups. Delivered with a clear parts specification and compatible insert family, the bar supports efficient stock management and reliable performance on both series production and single-part jobs. Choose the Teknik Cutting Tools KA102TM boring bar for reliable 95° turning with internal coolant support — contact Metav Werkzeuge in Emmerich for availability, delivery from stock and tailored application guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: KA102TM Manufacturer: Teknik Makina ISO designation: A08H SCLCR Compatible inserts: CC-- 0602 Diameter: 10 mm Shank diameter: 8 mm Overall length: 100 mm Cutting angle: 95° Cutting height: 16 mm Weight: 0.05 kg Cutting direction: right Internal coolant: yes Indexable insert type: CC-- 0602 Short overhang design for rigidity ISO-compatible tool geometry FAQ What inserts fit this boring bar? The boring bar accepts CC-- 0602 indexable inserts; the ISO designation A08H SCLCR specifies the holder geometry for correct seating and clamping. Is coolant delivered through the tool? Yes, this tool features internal coolant, which supplies fluid directly to the cutting edge to improve chip evacuation and extend insert life. Which cutting direction is supported? The bar is configured for right-hand turning operations and is suitable for standard lathe setups using compatible holders. What are the key dimensions to check before ordering? Verify the Ø10 mm diameter, 8 mm shank diameter and 100 mm overall length to ensure compatibility with the machine tool and holder. Can this tool be used for series production? The compact, rigid design and coolant support make it suitable for repetitive production work where consistent surface finish and tool life are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high-stiffness design and proven compatibility with CCMT 060204 indexable inserts to improve rear-side deburring and countersinking efficiency; order the tool directly via Metav Werkzeuge or request specialist advice from our consultants. Back countersink for CCMT 060204 — 20 mm shank, Ø 10 mm nominal A back countersink Back countersink for CCMT 060204 engineered for precise rear-side chamfering and deburring in milling applications, using indexable inserts for fast tool servicing. Back countersink for CCMT 060204 inserts 20 mm shank for high stability 10 mm nominal diameter, Ø 18 mm max cutting Quick insert fix with Torx M2.5x5.5 Consistent back-side finishing with indexable inserts The tool delivers reliable rear-side chamfering by using indexable inserts (CCMT 060204), which allow rapid refresh of the cutting edge without regrinding. The combination of a 20 mm shank and a stiff body reduces deflection under load, improving surface finish and repeatability on the machined component. In practical terms, fewer reworks and a steadier process mean shorter cycle times and more predictable production planning for workshops and small series manufacturers. Fewer interruptions and straightforward maintenance Designed around a single replaceable cutting edge, the countersink simplifies chip flow and reduces setup complexity. The supplied fastening specification — Torx screw M2.5x5.5 secured with a T8 key — enables quick insert changes and reliable clamping torque, cutting downtime during shift changes. The modest overall length of 110 mm and a tool weight of 0.194 kg make the tool easy to handle while maintaining concentricity in toolholders, which benefits both tool life and the life of the inserts. Practical benefits for workshop integration Compatibility with standard CCMT 060204 inserts means stocked carbide insert grades can be used immediately, supporting flexible production planning. The nominal 10 mm diameter and a maximum cutting diameter of 18 mm provide a useful operating window for a range of deburring and countersinking tasks, while the single cutting edge supports predictable chip formation. The result is a compact, efficient solution that helps maintain throughput without complex tooling changes. For precise rear-side countersinking and fast insert replacement choose Teknik Cutting Tools via Metav Werkzeuge — contact Metav Werkzeuge for availability and tailored technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: C100TM Manufacturer: Teknik Makina Item name: Back countersink for indexable inserts CCMT 060204 Facts Nominal diameter: 10 mm Cutting diameter max: 18 mm Shank diameter: 20 mm Overall length: 110 mm Cutting edges: 1 Weight: 0.194 kg Special features Suitable inserts: CCMT 060204 Torx screw: M2.5x5.5 Torx key: T8 Application: milling FAQ Which indexable inserts fit this countersink? This back countersink is compatible with CCMT 060204 indexable inserts as specified for the Teknik Makina tool (SKU C100TM). What shank diameter is required for stable clamping? The tool uses a 20 mm shank, which provides increased stiffness and stable clamping in standard toolholders. What is the maximum cutting diameter for rear countersinking? The maximum cutting diameter for this countersink is 18 mm, with a nominal diameter of 10 mm for common operations. How is the insert secured and which key is needed? Inserts are fastened with a Torx screw M2.5x5.5; a T8 Torx key is specified for secure and quick replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from robust solid carbide rigidity combined with integrated internal coolant for reliable chip control and consistent surface quality; the compact 125 mm overall length keeps overhang low for stable finishes. Order the Bohrstange directly via Metav Werkzeuge or ask our consultants if needed. Bohrstange — Boring bar SCLC with internal coolant by Teknik Makina Bohrstange is a purpose-built SCLC boring bar designed for precision internal turning with coolant feed, ideal for production and toolroom use. SCLC design with internal coolant Solid carbide construction for rigidity Compatible with CC--0602 indexable inserts 8 mm shank, 125 mm overall length Faster, more consistent machining through targeted coolant delivery The SCLC configuration with internal coolant channels coolant straight to the cutting edge, which improves chip evacuation and reduces heat at the cutting zone. For workshops processing medium to hard steels, this means fewer interrupted cycles and more consistent part quality; the tool’s coolant feed lowers thermal distortion and helps maintain dimensional accuracy during longer runs. In a production setting, this targeted cooling contributes directly to higher first-pass yields and reduced rework. Rigid, vibration‑resistant body for repeatable finishes Constructed from solid carbide, the bar offers high stiffness that resists chatter and dampens vibration during cutting. The material choice delivers better tool life when compared with less rigid holders and supports precise, repeatable surface finishes on turned bores. For operators seeking predictable results in batch manufacturing, the carbide body reduces cycle‑to‑cycle variation and helps meet tighter tolerances with fewer adjustments. System compatibility for quick insert changes and secure clamping The holder is specified for CC--0602 indexable inserts and supplied with the established Torx screw standard (Torx T8 key; screw M2.5x5.5), enabling straightforward, tool‑shop familiar clamping procedures. The standardised interface shortens tool changeover time and simplifies inventory: inserts and fasteners follow common industry norms, so retrofitting into existing tool rows is uncomplicated and efficient. Compact dimensions for constrained setups and reduced overhang With a 10 mm diameter, 8 mm shank and 125 mm overall length, the boring bar is designed for confined spaces and reduced overhang — a setup that inherently improves rigidity and accuracy. The cutting height 5 mm provides a clear reference for selecting appropriate inserts and setting cutting parameters. Lightweight at 0.05 kg, the bar is easy to position and clamp, which benefits small batches and mixed‑model work where rapid fixturing is required. Contact Metav Werkzeuge today at info@metav-werkzeuge.com or +49 2822 7131930 to discuss Teknik Makina’s SCLC with coolant (SKU KE10TM) and confirm suitability for specific machining tasks Technical data Article number: KE10TM Manufacturer: Teknik Makina Material: solid carbide ISO designation: E08K SCLCR 06 ECLASS: 21180806 Internal coolant: yes Facts Diameter: 10 mm Overall length: 125 mm Shank diameter: 8 mm Weight: 0.05 kg Cutting height: 5 mm Cutting direction: right‑hand Special features SCLC with internal coolant Compatible with CC--0602 indexable inserts Torx key: T8 Torx screw: M2.5x5.5 Right‑hand cutting FAQ Which inserts fit this boring bar? The boring bar accepts CC--0602 indexable inserts; Teknik Makina’s SCLC design ensures correct seat and clamping for that insert size. Is the coolant supply internal or external? Coolant is supplied internally through the bar; the internal coolant feature on the Teknik Makina SCLC version directs fluid to the cutting zone for improved chip control. What is the shank diameter and overall length? This holder has an 8 mm shank and a 125 mm overall length, dimensions intended for compact setups and reduced overhang. Can this bar be used for hardened materials? The solid carbide design improves rigidity, but suitability for hardened materials depends on the specific insert grade and machining parameters; the Teknik Makina SCLC holder is optimised for stable machining with appropriate inserts and feeds. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Precision milling with compact dimensions and reliable insert clamping: the S751TM combines compatibility with Pramet ADMX 0702 indexable inserts and a 90° cutting angle on a 10 mm shank, delivering consistent shoulder results in small toolholder setups. Order the S751TM directly via Metav Werkzeuge or consult our specialists for application advice. S751TM — Shank milling cutter for ADMX 0702 indexable inserts, 10 mm shank, 90° The S751TM is a shank milling cutter designed for use with ADMX 0702 indexable inserts, engineered for accurate shoulder and face milling in compact machining centres and workshop setups. Compact 10 mm shank diameter 90° cutting angle for square shoulders Compatible with Pramet ADMX 0702 inserts Torx clamp M2x4.2 with T6 key Precise shoulder milling with compact geometry The shank design and 90° cutting angle deliver a consistent square shoulder finish while keeping tool overhang minimal. With a 10 mm shank diameter and 2 cutting edges, the tool offers stable engagement during interrupted cuts and contouring, which supports predictable dimensional results on workpieces. Designed for indexable-insert operation, the cutter body accepts ADMX 0702 inserts to separate cutting-edge wear from the holder, simplifying routine maintenance and repeatability across series production runs. Secure clamping and low-maintenance exchange Fast and reliable insert retention is provided by the Torx M2x4.2 clamp screw, tightened with a T6 key, which ensures reproducible clamping torque and straightforward insert changes. The lightweight construction (approx. 0.062 kg) and compact overall length 80 mm reduce spindle load and contribute to longer tool life under correct operating conditions. Built with high-quality metalworking in mind, the cutter body is intended to reduce downtime through quick insert swaps and predictable reconditioning cycles. Easy integration into production tooling and small setups The compact shank and reduced overall length make the cutter suitable for tight fixturing and smaller toolholders common in precision workshops. With a 16 mm cutting length and a balanced design for indexable inserts, the tool aligns with standard workshop workflows and allows for economical edge management: worn inserts are replaced without replacing the holder body. Documentation-friendly identifiers and simple geometry support rapid tool data entry into CAM systems for repeatable machining sequences. For application-specific advice on Teknik Makina cutting tools, contact Metav Werkzeuge in Emmerich for an expert consultation or request detailed compatibility information via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: S751TM Manufacturer: Teknik Makina Product type: Shank milling cutter for indexable inserts For inserts: ADMX 0702 Fits inserts by: Pramet Torque screw: M2x4.2 (Torx T6) Facts Shank diameter: 10 mm Cutting length: 16 mm Overall length: 80 mm Weight: 0.062 kg Number of cutting edges: 2 Cutting angle: 90° Special features Compatible inserts: ADMX 0702 Intended insert manufacturer: Pramet Torx screw M2x4.2, key T6 90° shoulder geometry High-quality metal construction; long service life FAQ Which inserts are compatible with this cutter? The cutter is specified for ADMX 0702 indexable inserts and is compatible with inserts produced by Pramet for that designation. What torque system secures the inserts? Inserts are secured with a Torx M2x4.2 clamp screw; a T6 key is used for tightening and replacement operations. Is the shank suitable for small toolholders? The 10 mm shank diameter and 80 mm overall length make the cutter suitable for compact toolholders and tight setups where reduced overhang is required. How many cutting edges does the cutter have and what does that mean for feeds? The cutter carries two cutting edges; this geometry supports stable cutting at moderate feed rates and helps balance material removal and surface finish for shoulder operations. Can worn inserts be replaced quickly to minimise downtime? Yes, the indexable-insert system separates cutting edges from the holder, allowing rapid insert changes to reduce machine downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com