Gibt es einen Hahn und Kolb Online Shop?

Take advantage of the robust combination of rigidity and fast indexable insert changes: the head delivers stable shoulder milling with a 90° cutting angle and accepts APMT 1604 indexable inserts for reliable chip control. Order directly via Metav Werkzeuge or ask the consultants for application matching. Teknik Makina corner milling head »T249TM« — 90° cutting geometry, 100 mm diameter A compact industrial corner milling head designed for shoulder and face milling operations using APMT 1604 indexable inserts Robust 90° cutting head geometry 100 mm diameter for stable cutting Accepts APMT 1604 indexable inserts M4x10 Torx fixing with T15 key Higher process stability through rigid head design The head’s 100 mm body diameter and solid mounting ensure increased stiffness during heavy cuts, which results in more consistent tolerances and improved surface finish. The 90° cutting angle is optimised for shoulder milling, allowing efficient material removal on vertical faces without requiring complex tool paths. For production environments, the reduced chatter and steady chip evacuation translate into measurable cycle-time improvements and fewer reworks, supporting a predictable machining process. Fast insert changes and secure clamping for less downtime Designed for standard APMT 1604 indexable inserts, the tool uses a M4x10 Torx screw and a T15 key for secure fixing; this combination provides quick and repeatable insert changes while maintaining clamping reliability. The tool’s 32 mm mounting diameter and 52 mm overall length give a compact footprint ideal for tight-tooling setups. Explaining the terms: an indexable insert is a replaceable cutting plate that can be rotated or replaced when one edge wears, so downtime is limited to a brief screw change rather than a full-tool regrind. Clear application fit and benefits for workshop workflows Supply-chain-friendly compatibility with common insert makers, for example Korloy, simplifies procurement and inventory. With eight cutting edges, the head distributes wear and enables consistent performance across repetitive operations. For small-batch manufacturers and larger CNC shops alike, the result is dependable milling performance with low setup complexity — supporting the move to more efficient and scalable production processes. Contact Metav Werkzeuge for tailored application advice and supply from our Emmerich warehouse — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T249TM Manufacturer: Teknik Makina Product name: Eckmesserkopf for APMT 1604 Indexable Inserts SKU: T249TM Facts Diameter: 100 mm Mounting diameter: 32 mm Overall length: 52 mm Cutting angle: 90° Cutting edges: 8 Weight: 1.53 kg Special features Compatible with APMT 1604 indexable inserts Compatible insert manufacturer: Korloy Torx screw: M4x10 Torx key size: T15 FAQ Which insert type fits this head? The head accepts APMT 1604 indexable inserts; compatibility with inserts from Korloy is indicated for the Teknik Makina corner milling head (SKU T249TM). What clamping hardware is supplied or required? Clamping is achieved with a M4x10 Torx screw tightened using a T15 key; the mechanism provides secure and repeatable insert retention for the Teknik Makina tool. What is the recommended application for the tool? The tool is designed for shoulder and face milling where a 90° cutting angle is required, offering stable cutting on vertical faces and efficient chip control. What mounting diameter is needed on the machine spindle or arbor? A 32 mm mounting diameter is required; this compact interface supports rigid fixation while minimising overhang. How many cutting edges are available before replacement? The tool is configured with 8 cutting edges in its typical use pattern, enabling balanced wear distribution and predictable tool-change intervals. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust 90° indexable angle head with a 32 mm shank and quick-lock M8x24 fastening for stable, repeatable corner turning; order the Indexable Angle Head T106TM directly via Metav Werkzeuge or consult our specialists if application advice is required Indexable Angle Head T106TM — 90° for TPKN 1603-2204 by Teknik Makina A Indexable Angle Head (T106TM) designed for angular turning and finishing operations with TPKN 1603‑2204 indexable inserts 90° cutting angle for precise corner work Compatible with TPKN 1603‑2204 indexable inserts 32 mm shank diameter for stable clamping M8x24 locking screw and M4x10 hex screw Improve process reliability with stable clamping and balance The angle head is engineered to increase machine uptime by combining a compact geometry with stable clamping. The 32 mm shank diameter ensures secure seating in standard toolholders, reducing vibration and runout during corner turning operations. With a managed mass of 0.961 kg, the unit keeps inertial loads low while delivering consistent contact between insert and workpiece. These design choices translate into measurable improvements in surface finish and repeatability, making the component suitable for both serial production and precision workshop tasks. Faster insert changes and safe fixation for reduced setup time Changeovers are simplified by the straightforward clamping concept and accessible fastenings. The head accepts TPKN 1603-2204 indexable inserts and is secured with a M8x24 locking screw plus an M4x10 hex screw for the insert clamp. The supplied clamp plate TA012 and the specified Allen key (size 5) make maintenance predictable and fast, limiting downtime. Clear mechanical interfaces reduce the chance of incorrect seating and allow operators to complete insert replacements and minor adjustments with confidence. Consistent corner accuracy and machining quality A true 90° cutting angle gives the head a defined geometry for finishing and profiling tasks where right-angle contact is required. The construction supports 5 cutting edges and a nominal tool diameter of 100 mm, while the overall compact length of 52 mm assists access in confined fixtures. By focusing on a restrained, purpose-built geometry, the toolholder achieves consistent contact conditions that aid in achieving target tolerances and surface specifications, particularly when working on components that require precise shoulder or groove definition. Workshop-ready compatibility and dependable performance Manufactured by Teknik Makina, the head integrates with common turning setups and is suitable wherever robust angle machining is needed. Its combination of precision build and practical fastening elements helps shops streamline tooling inventories — one compact head to match a range of indexable insert grades. The result is predictable machining behaviour, lower scrap rates and a smoother production flow when the head is paired with correctly specified inserts and stable fixturing. For application advice or to secure supply from our Emmerich distribution, contact Metav Werkzeuge — specialists are available at info@metav-werkzeuge.com or on +49 2822 7131930 to recommend the right setup for Teknik Makina angle heads Technical Data Article number: T106TM Manufacturer: Teknik Makina Product: Indexable Angle Head (Eckmesserkopf) For indexable inserts: TPKN 1603-2204 Clamp plate: TA012 Facts Shank diameter: 32 mm Weight: 0.961 kg Overall length: 52 mm Diameter: 100 mm Cutting angle: 90° Number of cutting edges: 5 Special features Locking screw: M8x24 Hex screw: M4x10 Allen key size: 5 Suitable for TPKN 1603 family inserts SKU: T106TM FAQ Which indexable inserts fit this angle head? The T106TM is designed for TPKN 1603‑2204 indexable inserts; these insert types provide standard seating and reliable cutting geometry for corner turning applications. What is the shank diameter and how does it affect clamping? The shank diameter is 32 mm, offering a secure fit in matching toolholders and contributing to reduced vibration and improved runout stability. Which fastenings are used to secure the insert and clamp plate? Insert fixation uses an M8x24 locking screw with an M4x10 hex screw for the clamp; the clamp plate is specified as TA012, and a size 5 Allen key is recommended for assembly. Is the head suitable for finishing work at right angles? Yes — the dedicated 90° cutting geometry provides predictable contact and is optimised for finishing and shoulder profiling where accurate right-angle machining is required. How heavy is the unit and what are installation considerations? The head weighs 0.961 kg, a manageable mass that helps keep spindle loads moderate; ensure the receiving toolholder matches the 32 mm shank diameter and that clamping surfaces are clean for best performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust indexable-insert compatibility, a compact 32 mm arbor interface and a 100 mm diameter for reduced cycle times and stable series production; order the cutter directly via Metav Werkzeuge or consult our technical advisers for application-specific guidance. DF162TM Disc milling cutter – 100 mm diameter, for CCMT 0602 inserts (Teknik Makina) The DF162TM is a disc milling cutter engineered for efficient slotting and peripheral milling where secure insert clamping and repeatable results are required. Suitable for CCMT 0602 indexable inserts High rigidity with 32 mm arbor bore Twelve cutting edges for long tool life Cutting height 10 mm for deep engagement High-throughput machining with consistent chip removal The disc cutter is designed to deliver steady material removal in serial production. With a 100 mm diameter and 12 cutting edges, the configuration spreads cutting forces across multiple cutting points, which helps to reduce vibration and maintain cycle times. The combination of a moderate axial depth (24 mm) and a 10 mm cutting height provides a balance between productivity and tool life, making this cutter suitable for continuous operations that demand predictable output and fewer tool changes. Emphasis on measurable performance keeps preparation and planning times low. Secure insert clamping that simplifies maintenance A straightforward insert-and-screw fixing system reduces downtime during index changes. The cutter accepts CCMT 0602 inserts, a widely available geometry that simplifies logistics and reduces stock complexity. Fastener details—M2.5x7 Torx screws tightened with T08—ensure reproducible clamp torque and safe seating of the inserts. This straightforward assembly permits quick replacement and controlled maintenance procedures, supporting lean toolroom routines and lowering the risk of incorrect assembly. Compact arbor interface for rigid toolholding A 32 mm arbor bore provides a rigid connection to standard toolholders and arbors, improving concentricity and reducing runout. The compact interface benefits machines with limited spindle overhang by keeping mass close to the holder, which improves stability during side cutting and slotting passes. The resulting reduction in dynamic deflection supports tighter tolerances and a more consistent surface finish across batches. Design choices that reduce total process cost Using indexable inserts enables selective refurbishment of the cutting edge rather than replacement of the whole tool, which reduces consumable spend over time. The multiple-edge configuration and compatible insert geometry allow economical rotation and reuse of inserts, helping to make production more cost-efficient without compromising on quality. Where productivity gains are a priority, the cutter’s layout supports longer uninterrupted runs and a better parts-per-insert ratio. Practical handling and workshop integration At 0.453 kg, the cutter is light enough for practical handling during set-up yet engineered for industrial use. The DF162TM integrates into standard tool magazines and change routines with minimal adaptation. Clear labelling of fasteners and standardised insert formats reduces the likelihood of set-up errors and simplifies training for workshop staff, contributing to more predictable shift performance and lower rework rates. Support for specification and application decisions Technical compatibility with CCMT 0602 inserts and a 32 mm arbor makes specification straightforward when planning fixture and holder purchases. For applications requiring reliable slotting or face-milling with indexable inserts, the cutter offers a pragmatic balance of rigidity, serviceability and productivity. When questions about suitability arise, choosing a partner with applied precision expertise helps to bridge the gap between specification and on-floor reality. For reliable supply and application advice for the DF162TM disc milling cutter from Teknik Makina, contact Metav Werkzeuge – our consultants in Emmerich will advise on holder selection and insert choice to match the production requirement Technical data Article number: DF162TM Designation: Disc milling cutter Manufacturer: Teknik Makina Numbers / Core technical data Diameter: 100 mm Number of cutting edges: 12 Cutting height: 10 mm Maximum axial depth (ap): 24 mm Arbor bore: 32 mm Weight: 0.453 kg Special features / Versions For indexable inserts: CCMT 0602 Torx screws: M2.5x7 Torx key: T08 Compatible with standard 32 mm toolholders FAQ What insert type does the cutter use? The cutter is specified for CCMT 0602 indexable inserts; this insert format is widely available and supports economical edge changes. How many cutting edges are fitted to the cutter? The tool features 12 cutting edges, which spreads cutting loads and helps extend runtime between regrinds or insert changes. What arbor size is required for mounting? A 32 mm arbor bore is required; the compact interface improves rigidity and runout control when mounted correctly. Is the cutter balanced for high-speed use? The DF162TM is designed with a compact profile and multiple edges to reduce dynamic imbalance; specific balancing requirements should be checked against spindle speed and holder configuration. Which fasteners are used for insert clamping? Insert clamping uses M2.5x7 Torx screws tightened with a T08 key to ensure reproducible seating. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust indexable-insert technology, secure Torx clamping and a compact 32 mm arbor for reliable peripheral milling. Benefit from fast insert changes and consistent material removal thanks to the ten cutting edges and 14 mm cutting height. Order the DF166TM disc milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Disc milling cutter DF166TM — 100 mm diameter, for CCMT 09T3 inserts (Teknik Cutting Tools) A versatile disc milling cutter (DF166TM) designed for efficient peripheral milling in CNC and manual setups, featuring a 32 mm arbor and ten cutting edges for steady material removal. 100 mm diameter for medium workpieces Accepts CCMT 09T3 indexable inserts 32 mm arbor for secure mounting Ten cutting edges for steady removal Higher throughput from stable geometry and insert design The DF166TM delivers improved cycle times through a combination of 100 mm diameter and a deep 14 mm cutting height, enabling longer engagement of the insert and a reduced need for multiple passes. The tool accepts CCMT 09T3 indexable inserts which provide predictable cutting performance and rapid replacement when wear occurs. With an effective axial capability of 24 mm, the milling head allows conservative or more aggressive material removal strategies depending on the operation, which supports both roughing and semi-finishing workflows while preserving component surface quality. Reduced downtime through secure clamping and easy service Maintenance and indexable-insert changes are simplified by the standardised Torx system: M3.5×9 Torx screws secured with a T15 key ensure repeatable clamping torque and fast reassembly. The use of indexable inserts minimises tool change time and lowers total tooling spend, since only the cutting tips are consumed rather than whole cutters. The relatively compact mass (approx. 0.552 kg) contributes to easier handling during set-up and reduces wear on spindle bearings during intermittent manual changes, supporting a reliable, low-maintenance production rhythm. Seamless integration into workshop tooling systems A 32 mm arbor diameter fits common toolholders and makes the cutter straightforward to implement across a mixed fleet of machines, from small shop-floor mills to larger production centres. The disc design with ten cutting edges balances material removal rate and vibration control, which is particularly beneficial in jobs requiring consistent surface finish and repeatability. The cutter’s compatibility with established insert formats simplifies stock management and allows consolidation of spare inserts, aligning with the practical needs of precision workshops and job shops seeking efficient procurement and predictable availability. Contact Metav Werkzeuge for a tailored quote or technical comparison for the Teknik Cutting Tools DF166TM disc milling cutter — Metav Werkzeuge is available in Emmerich for direct supply and consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DF166TM Manufacturer: Teknik Makina Diameter: 100 mm Cutting height: 14 mm Arbor diameter: 32 mm Effective axial depth (ap): 24 mm Number of cutting edges: 10 Weight: 0.552 kg Compatible inserts: CCMT 09T3 Torx screw: M3,5x9 Torx key size: T15 eClass: 21180704 ETIM: EC011860 Special features Indexable-insert system Torx clamping for repeatable torque Balanced disc form for steady cutting Suitable for peripheral milling operations FAQ What insert type does the cutter accept? The DF166TM is designed for CCMT 09T3 indexable inserts, enabling economical replacement of worn cutting edges. Which arbor size is required for mounting? A 32 mm arbor diameter is required; the cutter is intended for standard toolholders that accept this shaft size. How many cutting edges are available for material removal? The tool features ten cutting edges, which supports efficient and steady material removal in peripheral milling. What is the maximum cutting height of the milling head? The milling head provides a 14 mm cutting height, allowing extended insert engagement for deeper passes. Is a special tool required to change the inserts? Insert clamping uses M3.5×9 Torx screws and a T15 key for reliable and quick insert replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a robust 100 mm diameter design combined with compatibility for CCMT 1204 indexable inserts and a 32 mm shank for stable, repeatable facing operations; order or request advice via Metav Werkzeuge for seamless workshop supply and configuration. Face mill DF168TM — 100 mm diameter, for CCMT 1204 inserts (Teknik Makina) A compact Face mill DF168TM built for indexable-insert facing and peripheral milling in machine-shop and CNC environments. 100 mm cutting diameter Compatible with CCMT 1204 inserts 32 mm shank for stable clamping Eight indexing cutting edges Faster metal removal with consistent surface quality The design focuses on efficient material removal while keeping tool life predictable. The 100 mm diameter and 8 cutting edges distribute cutting forces over several inserts, reducing load per edge and enabling higher feed rates with stable chip evacuation. With an available 24 mm axial depth and a cutting height 16 mm, this cutter provides a balance between stock removal and finishing capability. The use of indexable inserts means individual edges can be rotated or replaced quickly; this reduces downtime compared with solid cutters and supports continuous production runs. Quick insert changes and low-maintenance setup Maintenance routines are simplified by standardised fastenings and insert geometry. The cutter uses CCMT 1204 indexable inserts secured with a M5x12 Torx screw (Torx key T20), enabling rapid, repeatable changeover. The 32 mm shank assists concentric gripping in common toolholders and reduces vibration during heavy cuts, while the total mass of 0.567 kg supports easy handling during setup. Clear mechanical standards for screws and inserts reduce the risk of assembly errors and help maintain cutter balance after reassembly. Integrating the cutter into production workflow Designed for pragmatic workshop integration, the tool supports modular tooling strategies: a single cutter body accepts familiar indexable inserts, allowing stock removal and finish adjustments by selecting inserts and feeds rather than replacing whole tools. This approach lowers inventory complexity and cost per cutting edge. Delivered with standard mounting dimensions and an industry-compatible interface, the cutter fits existing toolholders and rotary spindles without extensive adapter lists, supporting efficient tool-change cycles and fewer interruptions on the shop floor. Practical considerations for setup and application When preparing a machining operation, consider the cutter’s geometry: the combination of 8 cutting edges and the specified axial depth offers strong material removal rates for facing and shoulder passes. Check that the machine spindle and holder accept a 32 mm shank and that the machine can accommodate the recommended axial engagement. The CCMT 1204 inserts are widely available, making regrinds or replacements straightforward. For best results, verify insert grade and coating with the chosen cutting speeds and workpiece material to match finish and tool life expectations. Contact Metav Werkzeuge for tailored tooling advice and reliable supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility, insert grades or delivery options Technical data SKU: DF168TM Manufacturer: Teknik Makina eClass: 21180704 ETIM: EC011860 Facts Diameter: 100 mm Cutting edges: 8 Shank diameter: 32 mm Cutting height: 16 mm Axial depth: 24 mm Weight: 0.567 kg Fixing screw: M5x12 (Torx T20) Special features Indexable inserts: CCMT 1204 Designed for face milling / disc milling operations Compact, workshop-friendly mass and dimensions FAQ What inserts are compatible with this face mill? The DF168TM accepts CCMT 1204 indexable inserts; this standard geometry allows easy sourcing of grades and coatings to suit different materials. How many cutting edges are available for use? The cutter body accommodates 8 active cutting edges, which spreads cutting forces and supports higher feed rates without compromising stability. What shank size is required for mounting? A 32 mm shank diameter is required for correct clamping; ensure the toolholder or arbor matches this dimension for safe operation. Are special screws or keys required for insert changes? Insert retention uses M5x12 screws tightened with a Torx T20 key, enabling fast, repeatable insert replacement. Is the DF168TM suitable for high-volume production? Yes — the combination of indexable inserts and distributed cutting edges is aimed at reducing downtime and improving tool life in repeated production cycles. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise cutting performance, secure clamping and fast insert changes thanks to the Ø100 mm cutter body, seven cutting edges and a 32 mm shank. Order the indexable face mill directly via Metav Werkzeuge or ask our consultants if needed. Indexable face mill T714TM – Ø100 mm, 7 cutting edges, for RPMW 1204 inserts by Teknik Makina The Indexable face mill T714TM is a robust cutter for high-volume milling tasks, engineered to accept RPMW 1204 indexable inserts for flexible tool life and cost-efficient regrinding. Ø100 mm cutting diameter Seven cutting edges for steady stock removal 32 mm tool shank for secure clamping Compatible with RPMW 1204 Korloy inserts Consistent material removal for uninterrupted production The design concentrates on continuous productivity by combining a Ø100 mm cutter body with 7 cutting edges, which balances material removal and surface quality. The arrangement of the cutting edges reduces chatter and distributes load across the cutter body, supporting stable performance in both face and peripheral milling. When fitted with the appropriate RPMW 1204 insert grades, the tool enables predictable cycle times and repeatable results that integrate well into automated tool paths and standard production setups. Secure clamping and quicker maintenance reduce downtime A 32 mm tool shank and robust fixing elements ensure reliable clamping in tool holders, while the use of Torx fastening delivers positive torque control. The assembly uses T15 drive keys and M4x7 screws for repeatable insert retention, simplifying routine maintenance. The combination of secure fixing and standardised screws shortens tool-change intervals and minimises the time required for topping up cutter capacity, which benefits workshop teams aiming to keep machine uptime high. Flexible compatibility with standard RPMW 1204 inserts Engineered specifically for RPMW 1204 indexable inserts, the cutter body accepts a wide range of grades and geometries from established suppliers such as Korloy, allowing selection of the insert best suited to the workpiece material and machining strategy. Indexable inserts provide the advantage of renewing only the cutting edge rather than replacing the whole tool body, which reduces tooling costs and simplifies inventory management for production planners and purchasing departments. Integration into workshop supply and operational practice Supplied through Metav, this milling cutter fits into a broader concept of dependable workshop provisioning. The combination of proven mechanical design and established insert compatibility supports straightforward spare-part planning and consistent reorders from a single supplier. For operations seeking both performance and supply security, the configuration reduces procurement complexity while maintaining the benefits of indexable tooling: cost control, quick recovery from wear and straightforward stock management. Contact Metav Werkzeuge today to arrange the optimal RPMW 1204 insert grade and secure immediate delivery from Emmerich for seamless integration into production. Technical Data Article number: T714TM Manufacturer: Teknik Makina Numbers / Core technical data Diameter: 100 mm Overall height: 53 mm Cutting edges: 7 Shank diameter: 32 mm Design / Special features For RPMW 1204 Indexable Inserts Compatible with Korloy RPMW 1204 inserts Torx screw: M4x7 Torx key size: T15 FAQ Which insert type is required for this cutter? The cutter accepts RPMW 1204 indexable inserts; Korloy grades are a direct fit and recommended where those grades match the application. How many cutting edges are fitted to the cutter body? The tool is equipped for seven cutting edges, which provides a balance between material removal rate and surface integrity. What shank diameter is specified for clamping? The cutter features a 32 mm shank diameter for secure mounting in standard tool holders. Which fasteners are used to secure the inserts? Insert retention uses M4x7 screws with a T15 Torx drive to ensure consistent torque and simple maintenance. Manufacturer: Teknik Cutting Tools; Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a robust combination of precise slotting capacity and quick insert replacement for uninterrupted production. The slitting saw’s 100 mm diameter and compatibility with SCMT 09T3 indexable inserts deliver consistent groove quality while the 32 mm clamping bore ensures secure mounting; order directly via Metav Werkzeuge or consult our specialists for specification matching. Slitting Saw DF092TM – 100 mm diameter, compatible with SCMT 09T3 inserts (Teknik Makina) the Slitting Saw DF092TM is a disc cutter designed for accurate slotting and grooving in industrial machining, offering a compact design for secure clamping and fast indexable-insert changes 100 mm cutting diameter Holds SCMT 09T3 indexable inserts 32 mm clamping bore for secure mounting 8 cutting edges and 10 mm cutting height Precise slotting with a proven insert system This disc cutter uses the widely specified SCMT 09T3 indexable inserts, providing a predictable and repeatable cutting geometry that reduces scrap and rework. By relying on a standard insert form, toolshops and production departments benefit from fast exchange cycles and consistent edge geometry without complex regrinding procedures. The 100 mm diameter and 8 cutting edges balance chip evacuation and surface finish, enabling controlled material removal for narrow slots and grooves. Explaining briefly: indexable inserts are small, replaceable cutting edges that are clamped into the cutter body; when an edge is worn, the insert is rotated or replaced, restoring cutting performance in seconds. Secure mounting and straightforward maintenance Mounting and securing the cutter is simplified by the 32 mm clamping bore and supplied fastening details: the assembly uses M4x11 Torx screws with a T15 key for reliable retention. This configuration reduces runout risk and shortens setup time on milling spindles or arbor adaptors, which in turn increases productive machining hours. With a 10 mm cutting height and a recommended ap of 24 mm, the tool supports typical slotting depths while maintaining stiffness. The low mass (approx. 0.408 kg) assists dynamic balance and can help reduce toolholder loads on high-speed setups. Built for repeatable throughput in production environments Designed by Teknik Makina for industrial use, the cutter’s geometry and insert compatibility are selected to support continuous operation and predictable tool life. The use of indexable inserts lowers overall tooling costs by separating the cutter body from the consumable cutting edges. For production planners this means fewer spindle interruptions and more consistent part tolerances. Where machining schedules demand both reliable performance and easy servicing, the slitting saw’s combination of secure clamping, common insert format and compact balance makes it suitable for small-batch turning to medium-volume milling runs. Contact Metav Werkzeuge for a tailored consultation on Teknik Makina’s Slitting Saw DF092TM and secure supply from our Emmerich facility Technical data Article number: DF092TM Manufacturer: Teknik Makina EClass: 21180704 ETIM: EC011860 Numbers / Core technical data Diameter: 100 mm Cutting edges: 8 Cutting height: 10 mm Clamping bore: 32 mm ap (recommended): 24 mm Weight: 0.408 kg Designs / Special features Compatible inserts: SCMT 09T3 Fastening: Torx screw M4x11 Torx key size: T15 SKU: DF092TM FAQ What insert type does this slitting saw use and why is it advantageous? The slitting saw DF092TM from Teknik Makina is specified for SCMT 09T3 indexable inserts; these inserts allow rapid edge replacement and consistent cutting geometry, lowering downtime and consumable cost in serial production. Which mounting diameter is required for the disc cutter? The cutter requires a 32 mm clamping bore for secure mounting; this ensures minimal runout and dependable holding during slotting operations with the DF092TM. What are the typical cutting parameters for groove depth with this tool? The disc cutter supports a 10 mm cutting height and a recommended axial depth (ap) of 24 mm, enabling controlled material removal for standard slotting tasks without overloading the insert edges. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine robust mounting with fast insert changes and consistent cutting performance to keep production steady; order directly via Metav Werkzeuge or contact our consultants for tailored integration advice. Disc Milling Cutter DF164TM – 100 mm diameter, CCMT 09T3 insert holder by Teknik Makina The Disc Milling Cutter DF164TM is a compact indexable milling head designed for medium-duty face milling and efficient insert replacement in workshop and CNC environments 100 mm diameter for medium-duty milling Compatible with CCMT 09T3 indexable inserts 32 mm bore for secure tool mounting 12 mm cutting height with 10 cutting edges Consistent rigidity for accurate face milling The cutter’s 100 mm diameter and 32 mm bore prioritise rigidity and repeatability during face milling cycles. A stable mounting interface reduces chatter and improves dimensional conformity across batches, which supports higher process reliability. The compact mass of 0.472 kg minimises additional spindle load, helping to preserve tool life and maintain spindle bearings when the tool is used in repetitive production runs. Fast insert changes minimise machine downtime Designed for indexable inserts, the head accepts CCMT 09T3 cartridges, allowing rapid replacement of cutting edges without regrinding. Insert retention uses M3.5x9 Torx screws tightened with a T15 key, enabling secure clamping and straightforward service routines. Quick changeover reduces non-productive time and simplifies inventory management, since commonly available CCMT inserts can be stocked and rotated as consumables. Balanced metal removal with controlled axial depth The tool provides a 12 mm cutting height combined with an axial depth parameter of 24 mm, offering an effective compromise between material removal rate and surface finish quality. This configuration supports steady chip evacuation and consistent cutting forces, which is particularly useful when planning passes for medium-depth finishing or semi-roughing operations on general steels and similar alloys. Practical integration and operational benefits With ten cutting positions, the cutter distributes cutting engagement to achieve a smoother cutting action and longer in-cycle life for each insert. The standard 32 mm mounting diameter ensures compatibility with a range of collet and arbor systems, allowing seamless integration into existing tooling setups. Overall, the design reduces setup complexity and supports stable production performance in small to medium workshops. For advice on integrating the Teknik Makina Disc Milling Cutter DF164TM into an existing toolset or for a bespoke recommendation from Metav Werkzeuge, please contact our team by e‑mail or phone for prompt technical guidance. Technical Data Article number: DF164TM Manufacturer: Teknik Makina Product: Disc milling cutter Core specifications Diameter: 100 mm Axial depth: 24 mm Cutting height: 12 mm Number of cutting edges: 10 Bore / mounting diameter: 32 mm Weight: 0.472 kg Features Insert type: CCMT 09T3 Torx screw: M3,5x9 Torx key: T15 SKU: DF164TM FAQ What insert type is required for this cutter? The cutter uses CCMT 09T3 indexable inserts; the DF164TM is configured to accept that insert geometry for efficient replacement. How is an insert secured to the cutter? Each insert is fastened with an M3.5x9 Torx screw tightened with a T15 key to ensure secure clamping and repeatable seating. What mounting diameter is needed for installation? The cutter requires a 32 mm bore for mounting; the DF164TM is designed for standard toolholders that accept this diameter. What is the maximum recommended cutting height? The tool has a 12 mm cutting height and an axial depth parameter of 24 mm, which should be observed when planning depth of cut and pass strategy. Is the DF164TM suitable for heavy roughing operations? The DF164TM is intended for medium-duty face milling; suitability for heavy roughing depends on the specific machine, spindle power and cutting parameters rather than the cutter alone. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining a 90° cutting angle with a 32 mm mounting interface delivers stable, repeatable corner turning for medium‑duty lathe operations. The unit’s compatibility with TPKN 1603–2204 indexable inserts and its six cutting edges reduce tool change frequency and support consistent cycle times — order the corner turning head directly via Metav Werkzeuge or consult our advisors for integration advice. Corner Turning Head T124TM — 90° cutting angle, 32 mm mounting (Teknik Cutting Tools) The corner turning head T124TM is a compact indexable‑insert tool head for precise corner and profiling operations using TPKN 1603–2204 inserts 90° cutting angle for precise corner turning Fits TPKN 1603–2204 indexable inserts 32 mm mounting diameter for rigid clamping Six cutting edges for longer service intervals Robust 1.542 kg construction for stability Precision and repeatability for accurate corner turning A right‑angled tool geometry ensures predictable chip flow and consistent part radii; the 90° cutting angle provides a defined cutting direction that simplifies setup and reduces adjustment effort. Paired with the 32 mm mounting diameter, the head delivers low vibration and high repeatability on typical turning centres. For shops replacing multiple insert systems, the clear compatibility with TPKN 1603–2204 indexable inserts helps standardise tooling and shortens tool‑change routines, improving overall process control. Secure clamping and straightforward insert changes Clamping is secured via an M6x17 hex screw tightened with a 4 mm Allen key, allowing fast, reliable insert seating without complex fixtures. The head accommodates six cutting edges, extending the interval between indexing or insert replacement and lowering downtime. With a mass of 1.542 kg, the assembly offers beneficial inertia for steady cuts while remaining manageable for manual tool changes and quick adjustments at the machine. Built for workshop throughput and integration The unit’s compact footprint — a nominal 100 mm diameter and 52 mm overall length — suits a range of turning and profiling tasks where accessibility and tool overhang are constrained. Designed as an indexable‑insert holder, the head supports rapid insert swaps and predictable tool life, which aids production planning and reduces unproductive machine time. Specification clarity and straightforward mounting make it well suited to maintenance‑friendly workshop environments that prioritise uptime and consistent part quality. For procurement guidance or to discuss fitting the Teknik Cutting Tools corner turning head T124TM into existing tool setups, contact Metav Werkzeuge for expert advice and dependable supply from Emmerich. Technical Data Article number: T124TM Name: Corner turning head for TPKN 1603–2204 indexable inserts Manufacturer: Teknik Makina Facts Mounting diameter: 32 mm Diameter: 100 mm Overall length: 52 mm Weight: 1.542 kg Cutting angle: 90° Cutting edges: 6 Screw: M6x17 Allen key: 4 mm Special features Compatible with TPKN 1603–2204 indexable inserts Compact design for limited overhangs Six‑edge indexing for extended run times FAQ What inserts fit this tool head? The corner turning head T124TM is designed for TPKN 1603–2204 indexable inserts, ensuring correct seating and alignment for those insert geometries. Which toolholder interface is required? The head requires a 32 mm mounting interface; ensure the machine turret or holder accepts a 32 mm shank for secure fitting. What fastening hardware is used for clamping? Clamping is with an M6x17 hex screw tightened using a 4 mm Allen key, as supplied in the technical specification for T124TM. How does the head support productivity? By supporting six cutting edges and standard TPKN inserts, the head reduces insert changes and offers predictable indexing intervals to maintain steady cycle times. Is the component heavy to handle during setup? At 1.542 kg, the unit is engineered to balance stability during cutting with manageable handling during setup and insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from precise turning geometry with a 16 x 16 mm shank and a 100 mm overall length, combined with a 72.5° cutting angle for reliable, repeatable cuts. Order the SVVBN 1616 clamp holder directly via Metav Werkzeuge or consult the specialists for application advice. SVVBN 1616 clamp holder for VBMT indexable inserts — Teknik Makina The SVVBN 1616 clamp holder is a compact turning tool holder engineered for VBMT 1604 indexable inserts, intended for stable, repeatable workshop turning tasks. SVVBN 1616 ISO tool holder Compatible with VBMT 1604 inserts 16 x 16 mm shank, designation H16 100 mm overall length, 0.184 kg weight Stable chip control through precise clamping geometry The SVVBN 1616 is designed to secure VBMT-style indexable inserts with consistent seating and clamping force. The combination of a rigid clamp design and a defined 72.5° cutting angle produces steady cutting engagement and reduced insert movement during operation. This geometry helps to preserve cutting-edge life by limiting micro-vibration and unexpected insert shifts. The modest 8 mm cutting head width contributes to focused cutting forces, which is particularly advantageous when repeatability and predictable tool life are required in batch turning operations. Reduced setup time and predictable toolpath geometry A clear, standardised shank size of 16 x 16 mm (H16) and the ISO designation SVVBN 1616 enable straightforward integration into existing tool posts and holders. The 100 mm overall length and low mass of 0.184 kg make handling and balancing simpler on smaller lathes while maintaining rigidity for common workshop speeds. Standard dimensions and ISO conformity translate into fewer measurement checks during setup and consistent toolpath geometry across jobs, improving production throughput and lowering the risk of setup-related scrap. Workshop resilience and parts compatibility for reliable uptime Compatibility with the widely used VBMT 1604 insert family ensures broad applicability across finishing and general turning tasks where defined insert geometry is required. The steel shank and compact head layout provide durable seating for frequent insert changes while keeping inventory management efficient through standardised insert use. Supplied by Teknik Makina and available via Metav Werkzeuge, the holder forms part of a supply chain focused on accessibility of precision tools, backed by a stocked European hub that supports reliable delivery and consistent quality for professional workshops. For tailored advice on the Teknik Makina SVVBN 1616 clamp holder (SKU D132TM) and to arrange supply through Metav Werkzeuge GmbH in Emmerich, please contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: D132TM ISO designation: SVVBN 1616 Product type: Clamp holder for VBMT indexable inserts Manufacturer: Teknik Makina Facts Height: 16 mm Width: 16 mm Cutting head width: 8 mm Overall length: 100 mm Cutting angle: 72.5° Weight: 0.184 kg Special features For VBMT 1604 indexable inserts Shank designation: H16 EClass: 21181004 ISO-compatible turning holder FAQ Which insert type fits this holder? The SVVBN 1616 clamp holder accepts VBMT 1604 indexable inserts; the geometry is matched for that insert form. What are the shank and mounting dimensions? Shank dimensions are 16 x 16 mm with designation H16, ISO code SVVBN 1616, and an overall length of 100 mm. What is the cutting angle and how does it affect cutting? The holder presents a 72.5° cutting geometry, which promotes stable engagement and predictable cutting forces in common turning operations. Is this holder suitable for small lathes and light-duty turning? With a compact length of 100 mm and a weight of 0.184 kg, the holder is suited to situations where reduced overhang and manageable mass are beneficial. What is the SKU for ordering and reference? The product is listed under SKU D132TM and is available from Metav Werkzeuge as the Teknik Makina SVVBN 1616 clamp holder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a left‑hand orientation, a 25 mm cutting height and secure seating for VBMT 1103 inserts — order the holder directly via Metav Werkzeuge or consult our specialists for application advice. Klemmhalter SVJB for VBMT Indexable Inserts (SVJBL 1616) — left‑hand, 100 mm Klemmhalter SVJB for VBMT Indexable Inserts is a left‑hand clamping holder designed for turning applications with VBMT 1103 indexable inserts, providing compact geometry for tight toolposts and reliable repeatability. Left‑hand orientation for precise turning Compatible with VBMT 1103 inserts Compact head, 20 mm width 25 mm cutting height for stable clamping Engineered for consistent turning performance The Klemmhalter SVJB for VBMT Indexable Inserts is built to maintain a stable cutting set‑up in routine production and workshop environments. Its ISO designation SVJBL 1616 and suitability for VBMT 1103 inserts ensure interoperability with common insert families, reducing changeover complexity. With an overall length of 100 mm, a head width of 20 mm and a cutting height of 25 mm, the toolholder aligns insert geometry consistently; the 93° cutting angle assists in predictable chip flow and tool engagement. The modest mass (0.192 kg) contributes to reduced centrifugal effects at higher speeds while the left‑hand orientation supports dedicated turning directions, improving process repeatability and minimising setup adjustments. Faster changeovers and secure seating to lower downtime Precision in the clamping interface delivers practical benefits: the holder’s geometry locates and secures indexable inserts with repeatable seating, which shortens maintenance intervals and helps preserve insert life. The bar designation H11 is commonly used in machined bar stocks for stable mounting, and the compact design is suitable for tighter toolpost environments where clearance is limited. By focusing on quick, error‑reducing insert replacement and steady clamping, the SVJB holder supports higher machine utilisation and a measurable reduction in production interruptions — a rational choice for operations prioritising efficiency and throughput. Integration into workshop workflows and application fit This clamping holder is targeted at machinists and maintenance engineers who require a robust, space‑efficient solution for left‑hand turning tasks. Compatibility with standard VBMT 1103 inserts and the SVJBL 1616 interface means the tool integrates easily into existing toolsets without extensive modifications. The combination of compact dimensions and a defined cutting height provides consistent rake and clearance for standard turning operations, making it a practical option for small‑batch runs as well as serial production. Its specification supports straightforward inventory management where ISO‑referenced holders streamline ordering and replacement. For dependable left‑hand turning performance choose Teknik Makina’s SVJB clamping holder — secure supply via Metav Werkzeuge with fast delivery from Emmerich; contact our technical advisors at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: D373TM Manufacturer: Teknik Makina Designation (EN): SVJB for VBMT Indexable Inserts ISO designation: SVJBL 1616 Suitable for inserts: VBMT 1103 Cutting direction: left Bar designation: H11 Weight: 0.192 kg Dimensions / core data Overall length: 100 mm Head width: 20 mm Holder width: 16 mm Height: 16 mm Cutting height: 25 mm Cutting angle: 93° Features / compatibility Left‑hand clamping holder Fits VBMT 1103 indexable inserts ISO interface SVJBL 1616 Bar designation H11 FAQ Which indexable inserts fit this holder? The Klemmhalter accepts VBMT 1103 inserts and is specified for VBMT geometry when used with the Teknik Makina SVJB clamping holder (SKU D373TM). Is the holder suitable only for left‑hand turning? Yes, the toolholder is configured for left‑hand cutting direction and is intended for left‑hand turning operations. What are the key dimensions to check for mounting? Key dimensions are an overall length of 100 mm, head width 20 mm, holder width 16 mm and a cutting height of 25 mm, which define fitment and clearance. What is the ISO designation and bar reference? The holder uses the SVJBL 1616 ISO interface and the bar designation provided is H11, aiding straightforward replacement and compatibility checks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, robust clamping solution that combines precise insert seating with a short overall length for tight turning applications; the holder’s SVJBR 1616 profile and compatibility with VBMT 1103 inserts ensure consistent chip control and repeatable results — order via Metav Werkzeuge or consult our specialists for application advice Clamping holder SVJB for VBMT Indexable Inserts — right‑hand toolholder with SVJBR 1616 profile The Clamping holder SVJB for VBMT Indexable Inserts is a right‑hand turning holder engineered for secure clamping of VBMT 1103 inserts in restricted‑space operations. SVJBR 1616 profile for stable seating Compatible with VBMT 1103 inserts Compact 100 mm overall length 16 mm shank and head dimensions Reliable clamping for precision turning The holder is designed as a toolholder for turning operations where stability and repeatability matter. Its SVJBR 1616 ISO profile gives a defined pocket geometry that secures the insert and reduces micro‑movement under load, which translates into consistent surface finish and extended insert life. The right‑hand cut orientation and a 93° approach angle reduce chatter in interrupted cuts; this makes the holder suitable for short overhangs and subcontracting environments where predictable results are essential. The technical design focuses on functional rigidity rather than decorative detail, so shops can expect dependable performance during routine production. Space‑saving design that supports productivity With a 100 mm overall length and matched 16 mm shank and head widths, this holder is made for tight set‑ups and compact toolposts. The reduced projection lowers leverage on the toolpost and allows faster spindle acceleration during cycle changes, improving throughput in small‑batch turning. The 25 mm cutting height positions the insert accurately at centre height for many standard lathes, meaning less adjustment time at setup and more time cutting. For operations that require quick changeovers, the short, lightweight construction — 0.204 kg — eases handling and minimises fixture stress without compromising clamping force. Clear compatibility and simple specification Compatibility with VBMT 1103 indexable inserts is a core feature; the pocket geometry and clamp alignment are produced to match that insert style so insert fitment and seat are repeatable. The holder’s ISO designation SVJBR 1616 identifies its shank profile and size, aiding rapid selection from tooling lists or CAD libraries. The H11‑F bar reference indicates the suitable bore or bar connection where required. For engineers unfamiliar with insert codes: VBMT 1103 denotes a triangular‑shaped, negative‑geometry insert with a specific corner radius and chipbreaker style, chosen here for general turning and facing tasks. Robust choice for production environments Manufactured for industrial use, the holder prioritises mechanical simplicity and manufacturing tolerances that matter on the shopfloor. The pronounced 93° cutting angle supports better chip evacuation and allows a stable cutting edge engagement for facing and light profiling. Where repeatability contributes directly to cost‑efficiency, this clamping solution supports predictable tool life and reduces scrap rates. It is particularly well suited to contract workshops and job shops that need a reliable, easy‑specified holder for common negative inserts. For selection guidance or to confirm suitability for a specific turning task, contact Metav Werkzeuge for expert advice on the Teknik Cutting Tools SVJB clamping holder (SKU D130TM) and benefit from rapid supply from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: D130TM Manufacturer: Teknik Makina Product: SVJB for VBMT Indexable Inserts ISO designation: SVJBR 1616 Weight: 0.204 kg Overall length: 100 mm Shank height: 16 mm Head width: 16 mm Cutting height: 25 mm Approach angle: 93° Suitable for inserts: VBMT 1103 Cutting direction: right‑hand Bar reference: H11‑F SKU: D130TM FAQ Which insert types fit this holder? The holder accepts VBMT 1103 indexable inserts; the pocket and clamp are produced to suit the VBMT geometry for secure seating and repeatable positioning. Is the holder suitable for right‑hand turning only? Yes — the toolholder is configured for right‑hand cutting, matching standard turning directions on conventional lathes. What is the ISO designation and why does it matter? The ISO code SVJBR 1616 identifies the shank/profile size and helps ensure the holder matches toolpost clearances and fixture designs used in production. How long is the holder and does that help in tight set‑ups? The overall length is 100 mm, which makes it particularly useful where reduced overhang is needed to lower toolpost leverage and improve rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine reliable left-hand clamping with through-tool coolant and a compact 100 mm body for stable turning operations; order the holder directly via Metav Werkzeuge or consult our specialists for application advice. PWLN for WNMG Indexable Inserts — Left-hand PWLNL 1616 Clamp Holder by Teknik Makina (internal coolant, 95° cutting angle) A PWLN for WNMG Indexable Inserts clamp holder designed for left-hand external turning with through-tool coolant and compatibility with WNMG 0604 inserts. Left-hand orientation for external turning Internal coolant for improved chip evacuation Compatible with WNMG 0604 inserts Compact PWLNL 1616 body, 100 mm length Consistent left-hand performance with through-tool cooling The clamp holder is configured for left-hand turning and features internal coolant to support sustained cutting conditions. By directing coolant to the cutting zone, the design helps to manage tool temperature and chip control, which contributes to longer insert life and more repeatable surface finishes. The solution is aimed at precise external turning operations where cooling and chip evacuation are critical for process reliability and reduced rework. Secure clamping and straightforward insert compatibility Designed as a PWLNL-style clamping system, the toolholder accepts WNMG 0604 indexable inserts and uses a robust clamping screw (TH617) together with a matching U-plate (TA021) for stable fixation. This arrangement reduces micro-movement at the cutting edge and shortens setup time when inserts need replacing. The clear interface and standard ISO designation support backwards compatibility with common turrets and holders, delivering measurable gains in uptime and process control. Compact footprint that fits existing toolposts with precision With a total length of 100 mm and a low-profile body, the holder balances rigidity and accessibility for tight setups. The 95° cutting angle and a cutting height of 30 mm allow effective tool positioning for a range of turning profiles, while the modest mass of 0.218 kg keeps inertial loads low on smaller lathes. The PWLNL 1616 form factor simplifies integration into existing tool stations, enabling rapid changeover without elaborate modifications. Choose the Teknik Makina PWLNL 1616 clamp holder for dependable left-hand turning with coolant-through capability — contact Metav Werkzeuge for tailored application support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: AP164TM Manufacturer: Teknik Makina Designation: PWLN for WNMG Indexable Inserts ISO designation: PWLNL 1616 Cutting direction: Left Internal coolant: Yes Facts Overall length: 100 mm Holder height: 16 mm Head width: 20 mm Body width: 16 mm Cutting height: 30 mm Cutting angle: 95° Weight: 0.218 kg Compatible insert size: WNMG 0604 Accessories & features Clamping screw: TH617 U-plate: TA021 Dowel pin: TS3 Lever: TL3 Hex key: 2.5 Allen Toolholder shank reference: H06-IKG1/8 FAQ Which inserts fit this clamp holder? The holder is specified for WNMG 0604 indexable inserts; the PWLNL 1616 geometry ensures secure seating and correct cutting height for these inserts. Is the coolant supplied through the tool body? Yes, the clamp holder features internal coolant to direct lubricant to the cutting zone and improve chip evacuation during machining. Can the holder be used for right-hand turning? This model is configured for left-hand operations; for right-hand turning, a mirrored toolholder should be selected. What are the main components for assembly? Assembly and clamping rely on the TH617 clamping screw, U-plate TA021 and dowel TS3, which together secure the insert seat and enable repeatable clamping. Will the toolholder fit standard turret pockets? The PWLNL 1616 form factor and the documented dimensions (100 mm length, 16 mm height) are compatible with many standard toolposts; confirm turret clearance before final installation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a high material‑removal rate and stable clamping thanks to the 30‑edge configuration and a 40 mm shank, ensuring reliable cycle times for roughing operations; order the Teknik Makina HF54TM via Metav Werkzeuge or contact our consultants for technical clarification. Igelfräser (multi‑insert milling cutter) HF54TM — Ø100 mm, 30 cutting edges (Teknik Makina) The Igelfräser (multi‑insert milling cutter) HF54TM is a robust milling tool intended for demanding roughing and heavy stock‑removal tasks on machining centres, designed to accept APKT 1604 indexable inserts for efficient, repeatable cutting performance. Ø100 mm diameter for wide coverage 30 cutting edges for aggressive stock removal Compatible with APKT 1604 Korloy inserts 40 mm shank for stable machine clamping Faster machining through optimised multi‑edge geometry The HF54TM is configured as a multi‑insert milling cutter with 30 cutting edges, a design that increases the number of contact points per revolution and thereby raises the effective material removal per spindle turn. This results in a measurable reduction in cycle time when compared with single‑edge tools, while the Ø100 mm tool diameter provides a broad cutting path that reduces the number of passes required. For production environments where throughput and reproducibility are priorities, the combination of many edges and a wide diameter translates into consistent process performance and predictable finishing allowances. Secure clamping and dimensional stability for repeatable results A key mechanical advantage is the 40 mm shank, which promotes rigid toolholding and reduces vibration during heavy cuts; the tool’s mass (approx. 4.329 kg) further contributes to damping. The cutter offers an extended engagement zone with a 75 mm cutting height, enabling deeper cuts without compromising stability. Fastener specification is integral to safe operation: the tool uses M4x10 Torx screws and a T15 Torx key for insert fixation, assuring reliable clamping torque and straightforward replacement. These features together reduce tool chatter and support predictable tool life, improving component quality and machine uptime. Simple insert management and compatibility with industry‑standard inserts This cutter is engineered for use with APKT 1604 indexable inserts (Korloy compatibility), which are widely available and allow economical restoration of cutting geometry without replacing the entire body. The indexable system permits quick rotation or replacement of individual inserts, lowering maintenance time compared with solid‑tool alternatives. The design supports efficient replacement cycles and inventory management: keeping a small stock of APKT 1604 inserts ensures minimal downtime and better cost control across production batches, enhancing overall process economics. Integration into workshop workflows and application scope The HF54TM suits applications where robust roughing is required prior to finishing passes; typical uses include bulk material removal, preparation of surfaces for subsequent finishing and operations where multiple passes would otherwise be necessary. The tool’s construction and insert system make it a practical choice for machining centres in general fabrication and component production. For technical queries or to confirm suitability for a specific material or machine set‑up, Metav Werkzeuge provides detailed advice and data sheets to support tool selection and process planning. Contact Metav Werkzeuge for tailored technical advice and to secure the Teknik Makina HF54TM multi‑insert milling cutter, compatible with APKT 1604 inserts, for immediate integration into production. Technical details Article number: HF54TM Manufacturer: Teknik Makina Shank diameter: 40 mm Diameter: 100 mm Cutting edges: 30 Cutting height: 75 mm Overall length: 100 mm Weight: 4.329 kg Compatible inserts: APKT 1604 (Korloy) Torx screw: M4x10 Torx key: T15 Suitable for heavy stock removal and roughing Indexable‑insert system for economical maintenance FAQ What insert type does the cutter accept? The HF54TM accepts APKT 1604 indexable inserts; the specification lists Korloy as a compatible insert supplier. Is the tool suitable for heavy roughing operations? Yes, the multi‑insert layout with 30 cutting edges and a 75 mm cutting height is intended for aggressive stock removal and roughing tasks. Which shank diameter is required for clamping? The cutter is supplied for a 40 mm shank diameter to ensure stable clamping in suitable toolholders. How are the inserts fastened and replaced? Inserts are secured with M4x10 Torx screws using a T15 key, allowing controlled torque and straightforward replacement of individual inserts without removing the whole tool body. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, ISO‑compliant toolholder that delivers stable clamping for CNMG inserts and predictable chip control; its 16 mm shank height and 95° cutting angle support repeatable setups and consistent surface finish. Order the clamping holder directly via Metav Werkzeuge or consult the team for application-specific advice. PCLNL 1616 clamping holder — PCLN for CNMG indexable inserts, left‑hand The PCLNL 1616 clamping holder is designed for left‑hand turning with CNMG 1204 indexable inserts, offering a compact 100 mm overall length and robust clamping geometry for reliable machining in workshop and light production environments Left‑hand PCLN holder for CNMG inserts Secure clamp for CNMG 1204 indexable inserts 16 mm shank height, 20 mm head width 100 mm overall length, robust 95° cutting angle Stable clamping for consistent surface quality The holder’s clamping geometry is configured to secure CNMG inserts firmly, which reduces micro‑movement and vibration during cutting. This stability translates into a measurable improvement in surface finish and extended insert life, because less chatter means smaller wear rates on the cutting edge. The left‑hand orientation and the roughly 95° cutting angle also create a predictable cutting force vector, simplifying toolpath planning and helping to maintain repeatable results across batches. Exact dimensions for fast setup and interchangeability With a 16 mm shank height, 20 mm head width and 100 mm overall length, the toolholder matches common toolpost interfaces and makes replacement and indexing straightforward. The ISO designation PCLNL 1616 signals compatibility with standard clamping systems, so set‑up time is reduced and machine downtime is minimised. The specified insert compatibility (CNMG 1204) ensures that indexable inserts can be swapped quickly—keeping maintenance simple and stocking efficient for the workshop. Designed for efficient shopfloor use and low maintenance The construction prioritises easy insert seating and reliable clamping, so wear is localised to the replaceable insert rather than the whole assembly. The combination of compact form and modest weight (0.225 kg) makes the holder convenient to handle while remaining rigid under typical turning loads. By enabling cost‑effective indexable inserts and quick changes, the toolholder supports higher machine utilisation and a lower cost per component, which is particularly valuable for small batches and mixed‑series work. Contact Metav Werkzeuge today to discuss Teknik Cutting Tools’ PCLNL 1616 clamping holder for left‑hand turning and to request application guidance directly from our Emmerich team via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: P139TM Manufacturer: Teknik Makina Designation (EN): PCLN for CNMG Indexable Inserts ISO designation: PCLNL 1616 Dimensions & weight Shank height: 16 mm Head width: 20 mm Insert height: 30 mm Overall length: 100 mm Weight: 0.225 kg Cutting angle: 95° Features & compatibility For CNMG 1204 indexable inserts Left‑hand cutting direction Shank designation: H12 Suitable for PCLN insert geometry SKU: P139TM FAQ What inserts fit this holder? This holder is designed for CNMG 1204 indexable inserts and secures them using the PCLN clamping geometry specified by the PCLNL 1616 form factor. Is the holder suitable for left‑hand turning only? Yes, the toolholder is specified for left‑hand cutting direction, matching lathe setups that require left‑hand tool orientation. What are the key dimensions to check for machine compatibility? Verify the 16 mm shank height, 20 mm head width and 100 mm overall length against the machine toolpost and toolpost pocket to ensure correct fit and clearance. How does the 95° cutting angle affect machining? The approximately 95° cutting angle provides a conservative clearance and helps control cutting forces, improving stability and aiding consistent surface finish. Can this holder improve insert life? By providing secure clamping and reduced vibration, the holder contributes to more uniform wear on the insert, which can extend usable insert life in many turning operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, Palbit-compatible head with a 100 mm diameter and 7 cutting edges to improve cycle times and reduce setup interruptions; order directly via Metav Werkzeuge or consult our specialists for tailored application advice. Planing cutter head T631TM — 100 mm diameter, 7 cutting edges — Teknik Makina The Planing cutter head T631TM is a precision tooling head for machining with SNKX 1606 and ONHX 0606 indexable inserts, designed for reliable face-planing and finishing in industrial workshops 100 mm diameter for wide coverage Seven cutting edges for steady material removal 32 mm mounting bore for secure attachment Compatible with SNKX 1606 and ONHX 0606 Compatibility that simplifies tooling choices and stock management This cutter head is built around proven insert standards: it accepts SNKX 1606 and ONHX 0606 indexable inserts, including Palbit variants. That standardisation means tooling lists and spare-part inventories can be consolidated, lowering logistical complexity. By selecting a head that matches widely used insert geometries, workshop planners and production engineers gain predictable cutting behaviour and simplified reordering. The modular concept of indexable inserts also reduces downtime, as worn edges are replaced instead of replacing entire cutters. Secure clamping and straightforward assembly for predictable set-up times The design includes a 32 mm mounting bore and is secured with a M5x12 Torx screw (Torx key T20), providing a compact and reliable attachment to compatible arbors. The combination of a defined bore and standard fasteners supports repeatable seating and easier balancing, which helps maintain tool life and surface quality. Weight and dimensions are optimised for rigid support while remaining manageable during tool changes, contributing to shorter setup intervals and fewer interruptions on batch or single-piece production runs. Geometry that balances cutting efficiency with surface quality A 45° cutting angle and 7 cutting edges deliver a compromise between aggressive metal removal and a refined finish. The larger 100 mm diameter spreads engagement over multiple inserts, reducing the load per edge and smoothing power draw during cutting. For less technical audiences: the 45° angle means the cutter slices material with a flatter bite, lowering vibration and improving the finished surface. This geometry is particularly useful where consistent planing results are required without excessive feed adjustment. Workshop-friendly serviceability and insert handling Maintenance is reduced owing to the use of indexable inserts and standard fastening. The head accepts OEM Palbit styles and alternative ONHX 0606 types, enabling quick swaps and predictable tool life depending on the chosen insert grade. Replacement of the inserts and torqueing of the M5x12 screws with a T20 key are straightforward tasks in any equipped workshop. For production environments seeking to streamline processes, this approach translates into lower tooling consumption and easier skills transfer between operators. For procurement or application guidance on the Teknik Makina Planing cutter head T631TM—particularly regarding Palbit-compatible inserts—contact Metav Werkzeuge for direct ordering and expert consultation: call +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: T631TM Manufacturer: Teknik Makina ECLASS: 21181015 Numbers Diameter: 100 mm Weight: 2.75 kg Bore (mounting): 32 mm Cutting angle: 45° Cutting edges: 7 Overall length: 63 mm Compatibility & features For SNKX 1606 and ONHX 0606 indexable inserts Compatible with Palbit inserts Torx screw: M5x12 Torx key size: T20 FAQ Which inserts fit this cutter head? The cutter head accepts SNKX 1606 and ONHX 0606 indexable inserts; Palbit variants are compatible and commonly recommended for this head. What mounting size is required for installation? Mounting requires a 32 mm bore; the head is fastened with a M5x12 Torx screw and tightened with a T20 key for secure attachment. How does the 45° geometry affect machining? A 45° cutting angle reduces cutting forces and vibration versus steeper angles, helping the head produce a smoother finish while maintaining effective material removal. Can inserts be replaced quickly during production? Yes; the design uses indexable inserts so worn edges are replaced rather than the entire head, enabling fast tool changes and minimal machine downtime. Is this head suitable for both roughing and finishing operations? The combination of 7 cutting edges and the 45° geometry offers a balance that can be used across roughing and finishing applications, depending on insert grade and machining parameters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Efficient face milling guaranteed by a 100 mm cutter diameter, compatibility with WNMX 09T3 indexable inserts and a sturdy 32 mm arbour — combine high material removal and simple insert handling. Order the Planmesserkopf directly via Metav Werkzeuge or consult our specialists for application advice. Planmesserkopf T671-2TM – face milling head, 100 mm diameter, for WNMX 09T3 (Teknik Cutting Tools) The Planmesserkopf is a purpose-built face milling head for high-efficiency machining with WNMX 09T3 indexable inserts, suited to industrial and workshop environments where predictable removal rates and fast tool changes are required 100 mm cutter diameter Compatible with WNMX 09T3 indexable inserts 7 cutting edges for high material removal 32 mm arbour with Torx T8 clamping screw M3x7 Maximise throughput with stable cutting performance This face milling head is engineered to convert spindle power into consistent metal removal: the 100 mm diameter and 7 cutting edges allow larger contact area per revolution and fewer passes for planar operations. The resulting benefit is measurable cycle-time reduction and improved cost-efficiency on serial jobs. Where roughing meets finishing, the design supports controlled chip evacuation and sustained cutting forces, preserving tool life and process repeatability. Precise fit and simple insert changes to reduce downtime The cutter accepts WNMX 09T3 standard inserts and is specified for Korloy geometries, which keeps insert inventory standardised across many workshops. The 32 mm arbour ensures secure mounting and concentric rotation, while the Torx T8 drive and M3x7 clamping screws permit straightforward, torque-controlled insert replacement. These features translate into shorter maintenance intervals and less machine downtime, enabling faster return to production after tool service. Robust construction for dependable workshop performance A compact overall length and balanced mass deliver stable running at typical milling speeds. With a weight of 1.627 kg and a 50 mm overall length, the head offers a low moment of inertia for steady operation and reduced spindle load. The geometry has been chosen to provide precision and resistance to vibration during heavy cuts; the result is repeatable surface quality and extended insert life. For shops looking to simplify tooling without sacrificing performance, this milling head reduces the number of dedicated holders required. For machining projects requiring reliable face milling performance from Teknik Cutting Tools, contact Metav Werkzeuge in Emmerich for precise product matching and local supply; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data Article number: T671-2TM Product name: Planmesserkopf Manufacturer: Teknik Makina ECLASS: 21181015 Core technical data Diameter: 100 mm Overall length: 50 mm Arbour bore: 32 mm Weight: 1.627 kg Cutting edges: 7 Compatibility & fastening For inserts: WNMX 09T3 Compatible insert manufacturer: Korloy Torx key: T8 Clamping screw: M3x7 FAQ Which insert type fits this head? The Planmesserkopf T671-2TM is designed for WNMX 09T3 indexable inserts and is compatible with Korloy standard geometries. What arbour size is required? A 32 mm arbour bore is specified for this cutter head, providing a secure fit for standard arbour mounting systems. How many cutting edges are provided on the head? The head is configured with 7 cutting edges, enabling efficient material removal and balanced cutting forces. What screw and driver are used for insert clamping? Insert clamping uses an M3x7 screw secured with a Torx T8 driver for reliable and repeatable fastening. Is this head suitable for both roughing and finishing operations? Yes, the geometry and multiple cutting edges make the head suitable for heavy material removal and controlled finishing passes when appropriate inserts are used. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust face milling solution combining efficient indexable-insert use, secure 32 mm toolholder mounting and a compact 100 mm cutter body for stable, high-productivity facing operations; order via Metav Werkzeuge or consult our specialists for application support. Face milling head T154TM – 100 mm diameter, for SPKN 1203 indexable inserts (Teknik Makina) The Face milling head T154TM is a compact cutter head engineered for facing operations with SPKN 1203 indexable inserts, offering a secure 32 mm toolholder interface and a design optimised for reliable insert clamping and repeatable performance. 100 mm diameter for broad face milling Compatible with SPKN 1203 inserts 32 mm shank for secure mounting Faster material removal with consistent surface quality Equipped to accept eight indexable inserts, this face milling head concentrates cutting capacity into a compact package that increases throughput on repetitive facing tasks. The combination of a 100 mm cutter body and 8 cutting edges reduces the number of passes required on large faces, which translates into shorter cycle times and improved machine utilisation. The 75° cutting angle moderates cutting forces and helps maintain a stable contact pattern, lowering vibration and supporting a consistent surface finish across the workpiece. Secure mounting and maintenance for uninterrupted production A robust 32 mm shank diameter provides secure clamping in standard toolholders, while the M8x24-L clamping screw system ensures reliable seat pressure for each insert pocket. Routine service is simplified by using a 5 mm Allen key, allowing fast insert changes and torque-controlled re-tightening. The assembly’s total mass of 1.698 kg contributes to steady rotational inertia without excessive load on the spindle, balancing rigidity and ease of handling during set-up and tool change operations. Designed for predictable, repeatable results in workshops The head’s geometry, tailored for SPKN 1203 inserts, delivers predictable cutting behaviour suited to production environments where repeatability is essential. With a 55 mm overall length and a compact form factor, the cutter integrates well on machines with limited working envelope while still offering broad face coverage. The design emphasises longevity of the clamping system and straightforward replacement of consumables, so maintenance intervals are minimised and uptime is maximised. Practical benefits for procurement and process planning Selecting this milling head supports efficient inventory management by standardising on a common insert type and a universally understood shank interface. The T154TM’s measurable characteristics — diameter, shank size, weight and cut angle — provide a clear basis for tool team decisions and process sheets, enabling confident integration into existing tool sets and NC programmes without guessing or rework. Choose Teknik Makina’s proven face milling head and contact Metav Werkzeuge for tailored specification advice and reliable supply direct from Emmerich. Technical data SKU: T154TM Name: Planmesserkopf (face milling head) Manufacturer: Teknik Makina EClass: 21180902 Facts Diameter: 100 mm Cutting angle: 75° Cutting edges: 8 Shank diameter (aufnahme): 32 mm Overall length: 55 mm Weight: 1.698 kg Features For SPKN 1203 indexable inserts Clamping screw: M8x24-L Allen key: 5 mm Compact body suited to constrained work envelopes FAQ Which inserts are compatible with this cutter head? The cutter head accepts SPKN 1203 indexable inserts; the pocket geometry and clamping system are designed for secure seating of that insert type. What toolholder size is required for mounting? Mounting requires a toolholder that accepts a 32 mm shank; the 32 mm interface provides stable clamping and proper alignment for the cutter. How many inserts does the head use and what is the benefit? The head is configured for 8 cutting edges, which increases material removal per revolution and helps reduce machining time for facing operations. Which tool is required for insert changes and screw tightening? Insert changes and clamping-screw tightening are performed using a 5 mm Allen key together with the M8x24-L clamping screw specified for the head. Is the head suitable for machines with limited working space? Yes; with an overall length of 55 mm and a compact 100 mm body, the head is suited for machines where installation space is restricted while still providing broad face coverage. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Product data conflict detected: the specification contains inconsistent information regarding compatible indexable inserts. The record lists compatibility with both PNMU 1206 and PNMU 1006 inserts, which cannot be reconciled without confirmation. Because insert designation determines seat geometry, cutter diameter fit and clamping arrangement, this discrepancy prevents the generation of a reliable, industry-accurate product description and technical guidance. Please verify which insert series is correct and confirm any related mounting details (insert size, seat type and clamping screw specification) so that a precise face milling head specification and application text can be produced. Once the correct insert designation is provided, a complete product description tailored to machining requirements and suitable toolholders will be issued.

Benefit from a stable, high-output solution thanks to the combination of a Ø 100 mm face diameter, 6 cutting edges and a 32 mm shank for secure clamping and steady material removal; order the component directly via Metav Werkzeuge or contact our consultants for application advice. Face milling head T689TM – Ø 100 mm, for WNMX 1305 indexable inserts (Teknik Makina) Face milling head T689TM designed for efficient face milling using WNMX 1305 indexable inserts from Korloy, suitable for workshop and production environments where predictable results and fast insert changes are required Ø 100 mm face milling diameter Six cutting edges for uniform stock removal 32 mm tool holder shank diameter Compatible with WNMX 1305 Korloy inserts Stable cutting performance for consistent faces The face milling head is engineered to deliver steady material removal across the entire contact area. With a Ø 100 mm cutter diameter and 6 cutting edges, the tool head spreads cutting forces and reduces load per insert, which contributes to an even surface finish and predictable cycle times. The 32 mm shank provides a solid connection to the tool holder, improving rigidity and reducing vibrations during operation, which supports reproducible results on repeat jobs. Fast insert changes and straightforward maintenance Compatibility with WNMX 1305 indexable inserts and the KRLY insert style allows the use of industry-standard parts for rapid replacement. The insert mounting uses a Torx T15 drive and M4x10 screws, permitting quick, tool-assisted changes that cut downtime. Indexable inserts are pre-ground cutting tips that are simply clamped into position, meaning that a worn tip can be replaced without regrinding the whole tool, so throughput is maintained and shop-floor availability improves. Compact geometry and workshop integration The head’s overall height 50 mm and concentrated geometry enable installation in many common milling set-ups without requiring extensive fixture changes. The balanced design supports stable operation within typical machining envelopes while the use of standard fastening elements simplifies spare-part handling. Routine checks are limited to insert condition and screw torque; with correct tightening of the M4x10 screws using a T15 key, clamping security and repeatability are assured. For complex applications or specific holder compatibility, technical advice is available from Metav’s consultants. Contact Metav Werkzeuge for tailored application advice on the Teknik Makina face milling heads and to discuss availability of the T689TM; email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance Technical data Article number: T689TM Manufacturer: Teknik Makina Name: Face milling head for WNMX 1305 Facts Diameter: 100 mm Overall height: 50 mm Cutting edges: 6 Shank diameter: 32 mm Special features For WNMX 1305 indexable inserts Compatible insert type: KRLY Torx key: T15 Torx screw: M4x10 Brand: Teknik Makina FAQ Which inserts fit this milling head? The face milling head T689TM is made for WNMX 1305 indexable inserts; the specification cites compatibility with the KRLY insert style from Korloy. What is the shank diameter for clamping? The tool features a 32 mm shank diameter for tool holder mounting. How many cutting edges does the head provide? The cutter is equipped with 6 cutting edges, which helps to distribute cutting forces and produces an even face finish. What fastening system is used for the inserts? Inserts are secured with M4x10 screws that are driven with a Torx T15, enabling quick, reliable insert changes. Who manufactures the T689TM and where can further technical details be obtained? The T689TM is supplied by Teknik Makina; for additional technical information or application support, Metav Werkzeuge can provide consultancy and parts sourcing. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Planmesserkopf – Planmesserkopf für präzise Planbearbeitung Planmesserkopf zur effizienten Planbearbeitung in der Zerspanung mit Innenkühlung und sieben Schneiden für konstant saubere Oberflächen Präziser Schnittwinkel 43° für feine Planflächen Sieben Schneiden erhöhen Spanleistung und Produktivität Innenkühlung integriert zur Standzeitverlängerung Montage mit Torx Schraube M5x12 und T20 Torx Schlüssel Ø100 mm und Gesamtlänge 52 mm für kompakte Einbausituationen Produktivität steigern durch optimierte Schneidengeometrie Der Planmesserkopf wurde für wirtschaftliche Planbearbeitung entwickelt und kombiniert 7 Schneiden mit einem Schnittwinkel 43°, um Material schnell und mit gleichmäßigem Spanabtrag zu bearbeiten. Die Kombination aus hoher Schneidanzahl und optimiertem Winkel reduziert Umlaufzeiten und verbessert die Oberflächengüte, sodass Rüstzyklen kürzer werden und die Bearbeitungsleistung pro Schicht steigt. Diese Auslegung ist besonders vorteilhaft bei großen Flächen, wo reproduzierbare Planitätswerte gefragt sind. Längere Standzeit durch integrierte Innenkühlung Dank der Innenkühlung wird Kühlmittel direkt an die Schnittzone geführt, was die Wärmeentwicklung reduziert und die Lebensdauer der Schneiden verlängert. Niedrigere Schnitttemperaturen vermindern Verschleiß und senken die Gefahr von Werkzeugbrüchen, wodurch Ausfallzeiten im Fertigungsprozess abnehmen. Für Anwender ohne aufwändige Nachbearbeitung bedeutet das weniger Werkzeugwechsel und eine verbesserte Prozessstabilität. Schnelle Montage und sichere Befestigung Die Befestigung erfolgt über eine Torx Schraube M5x12, montierbar mit dem Torx Schlüssel T20, was einen schnellen und spielfreien Zusammenbau gewährleistet. Diese bewährte Verbindung reduziert Montagefehler und ermöglicht zügige Wechsel von Schneidplatten, sofern solche eingesetzt werden. Das klare Schraubbild erleichtert zudem regelmäßige Kontrollen und Nachjustierungen an der Maschine. Passgenau für industrielle Fertigungsplätze und Beratung vor Ort Mit einem Durchmesser Ø100 mm und einer Gesamtlänge 52 mm passt der Planmesserkopf in kompakte Spannsysteme und ermöglicht vielseitige Einsatzfälle in mittelständischen Fertigungen. Metav Werkzeuge liefert die Komponenten aus dem Lager in Emmerich und unterstützt bei technischen Fragen. Metav steht für Demokratisierung der Präzision: transparent, zuverlässig und mit über 48.000 zufriedenen Kunden, die auf konstante Qualität setzen. Bei Unklarheiten zu Einbaumaßen oder Maschinenkompatibilität hilft das Team gern weiter. Empfehlung: Metav Werkzeuge empfiehlt den Einsatz des Planmesserkopfes von Teknik Makina für produktive Planbearbeitung; Anfragen und Bestellwünsche über info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: T212-1TM Marke: Teknik Makina Produkttyp: Planmesserkopf Fakten Durchmesser: 100 mm Gesamtlänge: 52 mm Aufnahme Ø: 32 mm Schneidanzahl: 7 Schnittwinkel: 43° Gewicht: 1,765 kg Besonderheiten Innenkühlung: ja (integrierte Kühlmittelzufuhr) Torx Schlüssel: T20 (für Montage) Torx Schraube: M5x12 Schneiden: 7 FAQ Wie viele Schneiden hat der Planmesserkopf und welchen Vorteil bringt das? Der Planmesserkopf von Teknik Makina verfügt über sieben Schneiden; diese hohe Schneidanzahl erhöht die Spanabnahme pro Umdrehung und sorgt für konstante Oberflächen, wodurch die Produktivität steigt. Ist eine Innenkühlung vorhanden und wie wirkt sie? Ja, der Planmesserkopf besitzt eine integrierte Innenkühlung, die das Kühlmittel direkt an die Schnittzone führt, Wärme reduziert und so die Standzeit der Schneiden verlängert. Welche Befestigungsart wird verwendet und welches Werkzeug wird benötigt? Die Befestigung erfolgt mit einer Torx Schraube M5x12; zum Anziehen wird ein Torx Schlüssel T20 empfohlen, was einen schnellen und sicheren Wechsel ermöglicht. Für welche Aufnahmen ist der Planmesserkopf geeignet? Der Planmesserkopf hat eine Aufnahme Ø32 mm und einen Durchmesser von 100 mm, wodurch er sich für kompakte Spannsysteme in der Serienfertigung eignet. Welche Rolle spielt der Schnittwinkel von 43°? Der Schnittwinkel von 43° sorgt für einen effizienten Spanabtrag und eine verbesserte Oberflächenqualität, insbesondere bei ebenen Planflächen und großflächigen Zerspanungsaufgaben. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Planmesserkopf Planmesserkopf für LNMX 1004 Wendeplatten Der Planmesserkopf für LNMX 1004 Wendeplatten unterstützt planseitige Schlicht- und Schruppbearbeitung an großen Werkstückflächen und ist ausgelegt für stabile, prozesssichere Zerspanungseinsätze Innenkühlung für bessere Spanabfuhr und Kühlung 100 mm Durchmesser für breite Planflächen 11 Schneiden für hohe Materialabtragung Schnittwinkel 90° für präzise Planlagen Passend für LNMX 1004 Wendeplatten von Korloy Innenkühlung sorgt für konstante Schnittbedingungen Die integrierte Innenkühlung leitet Kühlschmierstoff direkt an die Schneidzone und reduziert dadurch Wärmeentwicklung sowie Verschleiß. Das Ergebnis ist eine stabilere Schnittzone und längere Standzeit der Wendeschneidplatten. Besonders bei hochvolumigen Planbearbeitungen unterstützt die gezielte Kühlung die Spanabfuhr und verbessert die Oberflächenqualität bei gleichbleibender Bearbeitungsleistung. Hohe Schneidzahl und kompakte Bauform für effiziente Planbearbeitung Mit einem Durchmesser von 100 mm und 11 Schneiden bietet dieser Kopf eine hohe Auflagefläche für Wendeschneidplatten, was produktive Schnitte und gleichmäßige Materialabträge ermöglicht. Der Schnittwinkel 90° sorgt für exakte Planlagen, während die kompakte Gesamtlänge von 56 mm den Einsatz an geringen Bauteilradien erlaubt. Anwender profitieren so von gleichmäßigem Verschleißverhalten und stabilen Bearbeitungsergebnissen. Sichere Befestigung und einfacher Plattenwechsel Die Wendeschneidplatten werden mit einer Torx Schraube M4x10 fixiert; der mitgeführte Torx Schlüssel T15 ermöglicht exakten Anzug und schnellen Wechsel. Das Befestigungskonzept reduziert Nacharbeit durch lose Platten und vereinfacht die Wartung. Hinweise zur richtigen Anzugsmomentierung und zum routinemäßigen Prüfen der Schraubenqualität tragen zusätzlich zur Prozesssicherheit bei. Empfehlung: Der Planmesserkopf von Teknik Makina ist ideal für die Bearbeitung mit LNMX 1004 Wendeplatten von Korloy – für zuverlässige Planbearbeitung und maximale Standzeiten; bei technischen Fragen berät Metav Werkzeuge gern persönlich und liefert direkt aus Emmerich. Produktmerkmale Artikelnummer: T509TM Hersteller: Teknik Makina Bezeichnung: Planmesserkopf für LNMX 1004 Wendeplatten Produktart: Planmesserkopf Fakten Durchmesser: 100 mm Gesamtlänge: 56 mm Aufnahme Durchmesser: 32 mm Schneiden: 11 Schnittwinkel: 90 ° Gewicht: 1.48 kg Besonderheiten Innenkühlung: Kühlmittelführung direkt zur Schneide Passend für Wendeplatten: LNMX 1004 Passend für Wendeplatten Hersteller: Korloy (geeignet für Korloy LNMX 1004) Torx Schlüssel: T15 (Torx-Profil) Torx Schraube: M4x10 (Gewindegröße) FAQ Welche Wendeschneidplatten passen in diesen Planmesserkopf? Der Planmesserkopf von Teknik Makina ist ausgelegt für LNMX 1004 Wendeschneidplatten; die Bauform und Befestigungsaufnahme unterstützen die standardisierten Abmessungen dieser Plattengeneration. Ist eine Innenkühlung vorhanden und wie wirkt sie sich aus? Ja, der Planmesserkopf verfügt über eine aktive Innenkühlung, die den Kühlschmierstoff direkt an die Schneide führt und so Wärme reduziert sowie Spanabfuhr verbessert. Welche Schrauben und Werkzeuge werden für den Plattenwechsel benötigt? Für den Plattenwechsel wird eine Torx Schraube M4x10 verwendet; empfohlenes Werkzeug ist ein Torx Schlüssel T15 für das sichere Anziehen. Für welche Anwendungen eignet sich der Planmesserkopf T509TM besonders? Der Planmesserkopf T509TM von Teknik Makina eignet sich besonders für großflächige Planbearbeitung und Schlichtoperationen, wo konstante Oberflächenqualität und kurze Stillstandszeiten gefordert sind. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact, left‑hand PCLN toolholder with internal coolant and a secure screw clamp — precise chip control and stable insert seating for efficient turning operations. Order the holder directly via Metav Werkzeuge or consult the technical team for application advice. PCLNL 1616 PCLN toolholder – left‑hand, internal coolant, for CNMG inserts (Teknik Makina) PCLNL 1616 PCLN toolholder is a left‑hand clamping toolholder designed for turning with CNMG indexable inserts; suited to standard toolposts and compact lathe setups. Left‑hand PCLN toolholder with internal coolant Fits CNMG 1204 indexable inserts Compact 16 x 16 mm shank body 95° cutting angle for versatile turning Secure clamping and consistent cutting performance Built from workshop‑grade specifications, this toolholder delivers reliable clamping and predictable behaviour during cyclic turning operations. The PCLNL 1616 format provides a familiar interface for indexable insert tooling, with a robust clamping screw (TH818) and matching support parts (U‑plate TA016‑1, dowel TS‑4, knee lever TL4) for stable insert seating. At 16 x 16 mm shank dimensions and a head width of 20 mm, the holder balances rigidity and compactness; the modest mass of 0.236 kg helps reduce unbalanced loads on smaller toolposts. These attributes reduce vibration and contribute to consistent surface finish and tool life. Optimised for CNMG inserts and left‑hand turning cycles The holder is engineered specifically for turning with CNMG 1204 indexable inserts and supports a 95° cutting angle, enabling effective approach geometry for a wide range of diametral cuts. Left‑hand orientation makes the assembly suitable for operations that require opposite feed or for machines configured for left‑hand turning. The integrated internal coolant channel directs lubricant close to the cutting edge, promoting chip evacuation and improved thermal control; the result is extended insert service life and fewer interrupted cycles for regrinding or replacement. Designed for quick set‑up and low maintenance in production Assembly and maintenance are straightforward thanks to standardised fittings: the clamping screw designation TH818, the locating plate TA016‑1, dowel TS‑4 and lever TL4 ensure repeatable seating and rapid replacement when turnarounds are required. The holder’s 100 mm overall length and defined cutting height of 28 mm enable predictable tool offsets and simple programme setup on CNC lathes. Internally routed coolant minimises manual coolant management and reduces downtime related to chip build‑up, supporting higher process uptime and smoother production flows. Contact Metav Werkzeuge to specify the right Teknik Makina PCLN toolholder and confirm compatibility with existing toolposts and CNMG inserts Technical Data Article number: AP139TM Manufacturer: Teknik Makina Type designation: PCLNL 1616 Facts Shank width: 16 mm Shank height: 16 mm Head width: 20 mm Cutting height: 28 mm Total length: 100 mm Weight: 0.236 kg Cutting angle: 95° Cutting direction: left Special features Internal coolant For CNMG 1204 indexable inserts Clamping screw TH818 U‑plate TA016‑1 Dowel TS‑4 Knee lever TL4 Allen key: 3 Allen Compatible with H12‑IKG1/8 drill‑bar designation FAQ What inserts are compatible with this holder? The holder is designed for CNMG 1204 indexable inserts; the PCLN format and clamping arrangement match standard CNMG seat geometries. Is the coolant routed to the cutting edge? Yes, the toolholder features internal coolant that directs fluid towards the insert to improve chip evacuation and temperature control. Which clamping components are required for assembly? Assembly uses the clamping screw TH818, locating plate TA016‑1, dowel TS‑4 and knee lever TL4, which provide repeatable clamping and alignment. Is this a left‑hand or right‑hand holder? This is a left‑hand PCLN toolholder intended for left‑hand turning applications. What are the shank dimensions and overall length? Shank dimensions are 16 x 16 mm with a 100 mm overall length and a head width of 20 mm, allowing compact mounting and predictable offsets. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise clamping, compatibility with standard WNMG inserts and compact dimensions for reliable turning operations; order this toolholder directly via Metav Werkzeuge or consult our specialists for application advice. Klemmhalter — PWLN for WNMG indexable inserts, right-hand, ISO PWLNR 1616 (Teknik Cutting Tools) The Klemmhalter is a right-hand turning toolholder designed for external machining with WNMG 0604 indexable inserts, offering a compact 100 mm overall length for use on conventional and CNC lathes For WNMG 0604 indexable inserts Right-hand turning orientation Holder height 16 mm for stable clamping Overall length 100 mm for compact setups Maximise cutting stability and repeatability The PWLN-style toolholder delivers a rigid connection between insert and shank, which reduces vibration and improves surface finish during external turning. The cutting angle 95° and the well-defined cutting head width 20 mm create a stable cutting geometry that supports consistent chip formation and tool life. Reduced vibration translates directly into fewer reworks and longer service intervals for inserts, improving production efficiency and lowering total operating cost. Fast integration with standard inserts and tooling systems Compatibility with WNMG 0604 indexable inserts and the ISO designation PWLNR 1616 means straightforward integration into existing tooling rigs. The clamping geometry facilitates quick insert changes and secure seating, while the bohrstangen designation H06 indicates the matching shank standard for modular carriers. These standard interfaces shorten setup time and keep machine downtime to a minimum, making the holder particularly suited to mixed-batch and series production environments. Compact dimensions designed for shop-floor versatility With a holder height 16 mm, holder width 16 mm and modest cutting height 30 mm, this clamping holder fits tight-tooling layouts and small carriage clearances. The overall length 100 mm and low mass (0.223 kg) reduce leverage on the toolpost, enhancing rigidity for light to medium turning tasks. The right-hand orientation supports conventional turning cycles and is suitable for general workshop and industrial applications where space and repeatability matter. Practical benefits for production workflows Choosing this PWLN holder helps standardise tooling across multiple lathes thanks to its adherence to common ISO sizing, which simplifies inventory and spare-part management. The combination of compact form factor and robust clamping improves machining reliability while keeping the tool-change routine efficient. For operations aiming to balance precision and throughput, the holder offers a pragmatic compromise between rigidity and footprint. Contact Metav Werkzeuge GmbH for a tailored quotation and compatibility check for this Teknik Cutting Tools PWLN clamping holder (SKU P158TM) — call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com to discuss suitability for specific machines and applications Technical data SKU: P158TM Manufacturer: Teknik Makina Product: PWLN for WNMG Indexable Inserts ISO designation: PWLNR 1616 Suitable for: WNMG 0604 inserts Cutting direction: right Facts Holder height: 16 mm Holder width: 16 mm Cutting head width: 20 mm Cutting height: 30 mm Cutting angle: 95° Overall length: 100 mm Weight: 0.223 kg Special features Right-hand turning orientation Bohrstangen designation H06 Compact 100 mm overall length Designed for standard WNMG 0604 indexable inserts FAQ Is this holder compatible with WNMG 0604 inserts? Yes. The PWLN holder is specified for WNMG 0604 indexable inserts and is built to the ISO-related PWLNR 1616 dimensions for reliable fit and clamping. Can the holder be used on CNC lathes and manual lathes? The clamping holder is suitable for both CNC and conventional lathes; its compact overall length 100 mm and standard interface make it adaptable to typical toolposts and turret systems. What does the ISO designation PWLNR 1616 indicate? PWLNR 1616 denotes the standardised shank and clamping geometry used for this PWLN-style holder, ensuring interchangeability and predictable installation when matching to compatible tool systems. Does the holder support right-hand cutting only? This model is configured for right-hand cutting orientation; select the corresponding left-hand variant if left-handed machining cycles are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com